sravan/system76-edk2
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
77dcec128bde3e7f0db64d60501b5a072f9f0e8f
system76-edk2/MdeModulePkg/MdeModulePkg.dec
mdkinney acaa2726fb Add description for 64-byte FIFO enable bit for PcdSerialFifoControl. 
Update SerialPortInitializer() to properly preserve BIT5 in FCR instead of BIT4.


git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11404 6f19259b-4bc3-4df7-8a09-765794883524
2011-03-16 02:58:51 +00:00

632 lines
33 KiB
Plaintext
Raw Blame History

## @file MdeModulePkg.dec
#
# This package provides the modules that conform to UEFI/PI Industry standards.
# It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes)
# and libraries instances, which are used for those modules.
#
# Copyright (c) 2007 - 2011, Intel Corporation. All rights reserved.<BR>
# This program and the accompanying materials are licensed and made available under
# the terms and conditions of the BSD License that accompanies this distribution.
# The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php.
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
##
[Defines]
DEC_SPECIFICATION = 0x00010005
PACKAGE_NAME = MdeModulePkg
PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288
PACKAGE_VERSION = 0.91
[Includes]
Include
[LibraryClasses]
## @libraryclass IpIo layer upon EFI IP4 Protocol.
# This library is only intended to be used by UEFI network stack modules.
IpIoLib|Include/Library/IpIoLib.h
## @libraryclass Basic function for UEFI network stack.
# This library is only intended to be used by UEFI network stack modules.
NetLib|Include/Library/NetLib.h
## @libraryclass The helper routines to access UDP service.
# This library is only intended to be used by UEFI network stack modules.
UdpIoLib|Include/Library/UdpIoLib.h
## @libraryclass The helper routines to access TCP service.
# This library is only intended to be used by UEFI network stack modules.
TcpIoLib|Include/Library/TcpIoLib.h
## @libraryclass Defines a set of methods to reset whole system.
ResetSystemLib|Include/Library/ResetSystemLib.h
## @libraryclass Defines a set of methods related do S3 mode.
# This library class is no longer used and modules using this library should
# directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.
S3Lib|Include/Library/S3Lib.h
## @libraryclass Defines a set of methods related recovery mode.
# This library class is no longer used and modules using this library should
# directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.
RecoveryLib|Include/Library/RecoveryLib.h
## @libraryclass Provides HII related functions.
HiiLib|Include/Library/HiiLib.h
## @libraryclass Defines a set of interfaces on how to process capusle image update.
CapsuleLib|Include/Library/CapsuleLib.h
## @libraryclass Library for Deferred Procedure Calls.
DpcLib|Include/Library/DpcLib.h
## @libraryclass Provides global variables that are pointers
# to the UEFI HII related protocols.
#
UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h
## @libraryclass Provides a set of interfaces to abstract the policy of security measurement.
#
SecurityManagementLib|Include/Library/SecurityManagementLib.h
## @libraryclass OEM status code libary is used to report status code to OEM device.
#
OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h
## @libraryclass Debug Agent is used to provide soft debug capability.
#
DebugAgentLib|Include/Library/DebugAgentLib.h
## @libraryclass Provide platform specific hooks.
#
PlatformHookLib|Include/Library/PlatformHookLib.h
[Guids]
## MdeModule package token space guid
# Include/Guid/MdeModulePkgTokenSpace.h
gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}
## Hob guid for Pcd DataBase
# Include/Guid/PcdDataBaseHobGuid.h
gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}
## Guid for EDKII implementation GUIDed opcodes
# Include/Guid/MdeModuleHii.h
gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}
## Guid for Framework vfr GUIDed opcodes.
# Include/Guid/MdeModuleHii.h
gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}
## Guid to specify the System Non Volatile FV
# Include/Guid/SystemNvDataGuid.h
gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
## Guid specify the device is the console out device.
# Include/Guid/ConsoleOutDevice.h
gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
## Guid specify the device is the console in device.
# Include/Guid/ConsoleInDevice.h
gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
## Hob and Variable guid specify the platform memory type information.
# Include/Guid/MemoryTypeInformation.h
gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}
## Capsule update hob and variable guid
# Include/Guid/CapsuleVendor.h
gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}
## Guid specifiy the device is the StdErr device.
# Include/Guid/StandardErrorDevice.h
gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.
# Include/Guid/VariableFormat.h
gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.
# Include/Guid/SmmVariableCommon.h
gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}
## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID
# Include/Guid/Performance.h
gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 }}
gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }
## Guid is defined for CRC32 encapsulation scheme.
# Include/Guid/Crc32GuidedSectionExtraction.h
gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }
## Include/Guid/NicIp4ConfigNvData.h
gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}
## Include/Guid/StatusCodeCallbackGuid.h
gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}
## GUID identifies status code records HOB that originate from the PEI status code
# Include/Guid/MemoryStatusCodeRecord.h
gMemoryStatusCodeRecordGuid = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}
## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI
# Include/Guid/StatusCodeDataTypeDebug.h
gEfiStatusCodeDataTypeDebugGuid = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}
## A configuration Table Guid for Load module at fixed address
# Include/Guid/LoadModuleAtFixedAddress.h
gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }
## GUID used to store the global debug mask value into an EFI Variable
# Include/Guid/DebugMask.h
gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }
[Protocols]
## Load File protocol provides capability to load and unload EFI image into memory and execute it.
# Include/Protocol/LoadPe32Image.h
# This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.
# If developer need implement such functionality, they should use BasePeCoffLib.
gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}
## Print protocol defines basic print functions to print the format unicode and ascii string.
# Include/Protocol/Print2.h
gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }
## This protocol defines the generic memory test interfaces in Dxe phase.
# Include/Protocol/GenericMemoryTest.h
gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}
## Include/Protocol/Dpc.h
gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}
## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.
# Include/Protocol/FaultTolerantWrite.h
gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}
## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.
# Include/Protocol/SmmFaultTolerantWrite.h
gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}
## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.
# Include/Protocol/SwapAddressRange.h
gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}
## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.
# Include/Protocol/SmmSwapAddressRange.h
gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}
## This protocol is intended for use as a means to store data in the EFI SMM environment.
# Include/Protocol/SmmVariableProtocol.h
gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}
## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.
# Include/Protocol/SmmFirmwareVolumeBlock.h
gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}
## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules
# Include/Guid/DebugMask.h
gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }
[PcdsFeatureFlag]
## Indicate whether platform can support update capsule across a system reset
gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d
## This feature flag can be used to enable or disable all PCD PEIM services.
# If TRUE, all PCD PPI services will be produced.
# If FALSE, the minimal PCD PEIM services (only GetService) will be produced.
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020
## If TRUE, then the Device Path To Text Protocol should be produced by the platform.
# It can be disabled to save size.
gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037
## If TRUE, then the Device Path From Text Protocol should be produced by the platform.
# It can be disabled to save size.
gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038
## If TRUE, enable the statistic functionality about variable usage. Such information is
# stored as a vendor configuration table into the EFI system table.
# If user wants to use VariableInfo application in MdeModulePkg\Application directory to get
# variable usage info, this pcd should be set as TRUE. Otherwise VariableInfo application can
# not output useful info.
gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f
## If TRUE, Unicode Collation Protocol will be installed.
gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040
## If TRUE, Unicode Collation 2 Protocol will be installed.
gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041
## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
# It could be set FALSE to save size.
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042
## If TRUE, UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.
# It could be set FALSE to save size.
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043
## If TRUE, when PeiCore dispatches a PEI module, PeiCore will first search TE section from this PEIM to load the image.
# If TE section is not found, then PeiCore will search PE section.
# If FALSE, PeiCore will first search PE section from PEIM to load the image.
# This PCD is used to tune Pei phase performance to reduce the search image time.
# It can be set according to the generated image section type.
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044
## If TRUE, force to switch off the support of legacy usb. So legacy usb device driver can not make use of SMI
# interrupt to access usb device in the case of absence of usb stack.
# DUET platform requires the token to be TRUE.
gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047
## If TRUE, HiiImageProtocol will be installed.
# FALSE is for size reduction.
gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100
## If TRUE, USB KeyBoard Driver disables the default keyboard layout.
# The default keyboard layout serves as the backup when no keyboard layout can be retrieved
# from HII database.
gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200
## If TRUE, Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.
# If TRUE, the PeiCore will handle the framework FvHob and install FvInfo PPI for it.
# This is used to provide backward compatibility support to Framework HII and Framework FvHob.
gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009
## If TRUE, HelloWorld Application will print the verbose information.
# This PCD is a sample to explain FeatureFlag PCD usage.
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a
## If TRUE, FULL FTW protocol services (total six APIs) will be produced.
# If FASLE, only FTW Write service is available.
gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b
## If TRUE, DXE IPL must support the UEFI decompression algorithm.
# If FALSE, DXE IPL will not support UEFI decompression to save space.
gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c
## This PCD specifies whether PciBus supports the hot plug device.
gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d
## This PCD specifies whether the PCI bus driver probes non-standard,
# such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.
gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e
## This PCD specifies whether StatusCode is reported via Serial port.
gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022
## This PCD specifies whether StatusCode is stored in memory.
# The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.
gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023
## This PCD specifies whether Peiphase StatusCode is replayed in DxePhase.
gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d
## This PCD specified whether ACPI SDT protocol is installed.
gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d
## If TRUE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.
# If FALSE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are disabled.
# The default value for this PCD is to disable support for unaligned PCI I/O Protocol requests.
gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e
## This PCD specifies whether TEXT statement is always set to GrayOut statement in HII Form Browser.
# If TRUE, TEXT statement will always be set to GrayOut.
# If FALSE, TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f
[PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]
##
# This feature flag specifies whether DxeIpl switches to long mode to enter DXE phase.
# If it is TRUE, DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore;
# otherwise, DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.
# It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore
# is built in firmware.
#
gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b
[PcdsFixedAtBuild]
## Dynamic type PCD can be registered callback function for Pcd setting action.
# PcdMaxPeiPcdCallBackNumberPerPcdEntry indicate maximum number of callback function
# for a dynamic PCD used in PEI phase.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f
## VPD type PCD allow developer point an absoluted physical address PcdVpdBaseAddress
# to store PCD value.
#
gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010
## Maximum number of FV is supported by PeiCore's dispatching.
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030
## Maximum PEIM count in every FV is supported by PeiCore's dispatching.
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031
## Maximum stack size for PeiCore.
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032
## Maximum PPI count is supported by PeiCore's PPI database.
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033
## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize
# The root cause is that variable driver will use FTW protocol to reclaim variable region.
# If the length of variable region is larger than FTW spare size, it means the whole variable region can not
# be reflushed through the manner of fault tolerant write.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002
## The maximum size of single common variable, that is non-HwErr type varible.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003
## The maximum size of single hardware error record variable.
# In IA32/X64 platforms, this value should be larger than 1KB.
# In IA64 platforms, this value should be larger than 128KB.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004
## The size of reserved HwErr variable space. Note that this value must be less than or equal to PcdFlashNvStorageVariableSize
# In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.
# so the platform integrator should ensure this value is less than or equal to PcdFlashNvStorageVariableSize.
# this value is used to guarantee the space of HwErr type variable and not populated by common variable.
gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006
## The size of volatile buffer. This buffer is used to store VOLATILE attribute variable.
gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005
## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize
# The root cause is that variable driver will use FTW protocol to reclaim variable region.
# If the length of variable region is larger than FTW spare size, it means the whole variable region can not
# be reflushed through the manner of fault tolerant write.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014
## Size of the FTW working block range.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011
## FFS filename to find the ACPI tables
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016
## Single root I/O virtualization virtual function memory BAR alignment
# BITN set indicates 2 of n+12 power
# BIT0 set indicates 4KB alignment
# BIT1 set indicates 8KB alignment
gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047
## Flag of enabling/disabling the feature of Loading Module at Fixed Address
# -1: Enable the feature as fixed offset to TOLM
# 0: Disable the feature.
# Positive Value: Enable the feature as fixed absolute address, and the value is the top memory address
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015
## Smbios version
gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0206|UINT16|0x00010055
## TFTP BlockSize. Initial value 0 means using default block size which is (MTU-IP_HEADER-UDP_HEADER-TFTP_HEADER)
# to handle all link layers. If the value is non zero, the PCD value will be used as block size.
#
gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026
[PcdsFixedAtBuild,PcdsPatchableInModule]
## Maximun number of performance log entries during PEI phase.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f
## RTC Update Timeout Value
gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034
## If TRUE, then 16550 serial port registers are in MMIO space.
# If FALSE, then 16550 serial port registers are in I/O space. Default value.
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000
## If TRUE, then the 16550 serial port hardware flow control is enabled.
# If FALSE, then the 16550 serial port hardware flow control is disabled. Default value.
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001
## If TRUE, then 16550 serial Tx operations will block if DSR is not asserted (no cable).
# If FALSE, then the 16550 serial Tx operations will not be blocked if DSR is not asserted. Default value.
# This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006
## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002
## Baud rate for the 16550 serial port. Default is 115200 baud.
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003
## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits.
# BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits
# BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.
# BIT5..BIT2 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity
# BIT7..BIT6 - Reserved. Must be 0.
#
# Default is No Parity, 8 Data Bits, 1 Stop Bit.
#
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004
## FIFO Control Register (FCR) for the 16550 serial port.
# BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.
# BIT1 - Clear receive FIFO. 1 = Clear FIFO.
# BIT2 - Clear transmit FIFO. 1 = Clear FIFO.
# BIT4..BIT3 - Reserved. Must be 0.
# BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO
# BIT7..BIT6 - Reserved. Must be 0.
#
# Default is to enable and clear all FIFOs.
#
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005
## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER
# structure. The default value for this PCD is 0, which means that the DXE Core
# will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB
# boundary as close to the top of memory as feasible. If this PCD is set to a
# value other than 0, then the DXE Core will first attempt to allocate the
# EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified
# by this PCD, and if that allocation fails, retry the allocation on a 4MB
# boundary as close to the top of memory as feasible.
#
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027
[PcdsPatchableInModule,PcdsDynamic]
## This PCD defines the Console output column and the default value is 25 according to UEFI spec
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006
## This PCD defines the Console output row and the default value is 80 according to UEFI spec
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007
[PcdsFixedAtBuild,PcdsDynamic]
## Base address of the NV variable range in flash device
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
## Base address of the FTW spare block range in flash device.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013
## Base address of the FTW working block range in flash device.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010
## 64-bit Base address of the NV variable range in flash device
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001
## 64-bit Base address of the FTW spare block range in flash device.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013
## 64-bit Base address of the FTW working block range in flash device.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010
## This PCD defines the print string.
# This PCD is a sample to explain String typed PCD usage.
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004
## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store
# The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.
gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008
## This PCD specifies whether the Single Root I/O virtualization support.
gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044
## This PCD specifies whether the Alternative Routing-ID support.
gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045
## This PCD specifies whether the Multi Root I/O virtualization support.
gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046
[PcdsFixedAtBuild,PcdsPatchableInModule,PcdsDynamic]
## This PCD defines the times to print hello world string.
# This PCD is a sample to explain FixedAtBuild UINT32 PCD usage.
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005
## Indicate the max size of the capsule image with reset flag that the platform can support.
# The default max size is 100MB (0x6400000) for more than one large capsule images.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e
## Indicate the max size of the capsule image without reset flag that the platform can support.
# The default max size is 10MB (0xa00000) for the casule image without reset flag setting.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f
## Null-terminated Unicode string of the firmware vendor name that is default name filled into the EFI System Table
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050
## Firmware revision that is default value filled into the EFI System Table
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051
## Null-terminated Unicode string that described the firmware version
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052
## Null-terminated Unicode string that contains the date the formware was released
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053
## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true
# (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.
# The default value in PeiPhase is 1 KBytes.
# The default value in DxePhase is 128 KBytes.
gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054
## This PCD specifies whether to reset system when memory type information changes.
gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056
## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.
# Only following values defined in UEFI specification are valid:
# 0x00 (EFI_BLACK)
# 0x01 (EFI_BLUE)
# 0x02 (EFI_GREEN)
# 0x03 (EFI_CYAN)
# 0x04 (EFI_RED)
# 0x05 (EFI_MAGENTA)
# 0x06 (EFI_BROWN)
# 0x07 (EFI_LIGHTGRAY)
# 0x08 (EFI_DARKGRAY)
# 0x09 (EFI_LIGHTBLUE)
# 0x0A (EFI_LIGHTGREEN)
# 0x0B (EFI_LIGHTCYAN)
# 0x0C (EFI_LIGHTRED)
# 0x0D (EFI_LIGHTMAGENTA)
# 0x0E (EFI_YELLOW)
# 0x0F (EFI_WHITE)
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057
## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.
# Only following values defined in UEFI specification are valid:
# 0x00 (EFI_BLACK)
# 0x01 (EFI_BLUE)
# 0x02 (EFI_GREEN)
# 0x03 (EFI_CYAN)
# 0x04 (EFI_RED)
# 0x05 (EFI_MAGENTA)
# 0x06 (EFI_BROWN)
# 0x07 (EFI_LIGHTGRAY)
# 0x08 (EFI_DARKGRAY)
# 0x09 (EFI_LIGHTBLUE)
# 0x0A (EFI_LIGHTGREEN)
# 0x0B (EFI_LIGHTCYAN)
# 0x0C (EFI_LIGHTRED)
# 0x0D (EFI_LIGHTMAGENTA)
# 0x0E (EFI_YELLOW)
# 0x0F (EFI_WHITE)
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058
## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.
# The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:
# 0x00 (EFI_BLACK)
# 0x01 (EFI_BLUE)
# 0x02 (EFI_GREEN)
# 0x03 (EFI_CYAN)
# 0x04 (EFI_RED)
# 0x05 (EFI_MAGENTA)
# 0x06 (EFI_BROWN)
# 0x07 (EFI_LIGHTGRAY)
# 0x08 (EFI_DARKGRAY)
# 0x09 (EFI_LIGHTBLUE)
# 0x0A (EFI_LIGHTGREEN)
# 0x0B (EFI_LIGHTCYAN)
# 0x0C (EFI_LIGHTRED)
# 0x0D (EFI_LIGHTMAGENTA)
# 0x0E (EFI_YELLOW)
# 0x0F (EFI_WHITE)
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059
## Specify the background color for highlighted prompt and Question value text in HII Form Browser.
# The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:
# 0x00 (EFI_BACKGROUND_BLACK)
# 0x10 (EFI_BACKGROUND_BLUE)
# 0x20 (EFI_BACKGROUND_GREEN)
# 0x30 (EFI_BACKGROUND_CYAN)
# 0x40 (EFI_BACKGROUND_RED)
# 0x50 (EFI_BACKGROUND_MAGENTA)
# 0x60 (EFI_BACKGROUND_BROWN)
# 0x70 (EFI_BACKGROUND_LIGHTGRAY)
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A
[PcdsPatchableInModule]
## Specify memory size with page number for PEI code when
# the feature of Loading Module at Fixed Address is enabled
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029
## Specify memory size with page number for DXE boot time code when
# the feature of Loading Module at Fixed Address is enabled
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a
## Specify memory size with page number for DXE runtime code when
# the feature of Loading Module at Fixed Address is enabled
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b
## Specify memory size with page number for SMM code when
# the feature of Loading Module at Fixed Address is enabled
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c
Reference in New Issue View Git Blame Copy Permalink