system76-edk2/MdeModulePkg/Bus/Pci/EhciDxe/EhciReg.h

/** @file

  This file contains the definination for host controller register operation routines.

Copyright (c) 2007 - 2012, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent

**/

#ifndef _EFI_EHCI_REG_H_
#define _EFI_EHCI_REG_H_

//
// EHCI register offset
//

//
// Capability register offset
//
#define EHC_CAPLENGTH_OFFSET  0      // Capability register length offset
#define EHC_HCSPARAMS_OFFSET  0x04   // Structural Parameters 04-07h
#define EHC_HCCPARAMS_OFFSET  0x08   // Capability parameters offset

//
// Capability register bit definition
//
#define HCSP_NPORTS  0x0F            // Number of root hub port
#define HCSP_PPC     0x10            // Port Power Control
#define HCCP_64BIT   0x01            // 64-bit addressing capability

//
// Operational register offset
//
#define EHC_USBCMD_OFFSET       0x0  // USB command register offset
#define EHC_USBSTS_OFFSET       0x04 // Statue register offset
#define EHC_USBINTR_OFFSET      0x08 // USB interrutp offset
#define EHC_FRINDEX_OFFSET      0x0C // Frame index offset
#define EHC_CTRLDSSEG_OFFSET    0x10 // Control data structure segment offset
#define EHC_FRAME_BASE_OFFSET   0x14 // Frame list base address offset
#define EHC_ASYNC_HEAD_OFFSET   0x18 // Next asynchronous list address offset
#define EHC_CONFIG_FLAG_OFFSET  0x40 // Configure flag register offset
#define EHC_PORT_STAT_OFFSET    0x44 // Port status/control offset

#define EHC_FRAME_LEN  1024

//
// Register bit definition
//
#define CONFIGFLAG_ROUTE_EHC  0x01   // Route port to EHC

#define USBCMD_RUN            0x01     // Run/stop
#define USBCMD_RESET          0x02     // Start the host controller reset
#define USBCMD_ENABLE_PERIOD  0x10     // Enable periodic schedule
#define USBCMD_ENABLE_ASYNC   0x20     // Enable asynchronous schedule
#define USBCMD_IAAD           0x40     // Interrupt on async advance doorbell

#define USBSTS_IAA             0x20    // Interrupt on async advance
#define USBSTS_PERIOD_ENABLED  0x4000  // Periodic schedule status
#define USBSTS_ASYNC_ENABLED   0x8000  // Asynchronous schedule status
#define USBSTS_HALT            0x1000  // Host controller halted
#define USBSTS_SYS_ERROR       0x10    // Host system error
#define USBSTS_INTACK_MASK     0x003F  // Mask for the interrupt ACK, the WC
                                       // (write clean) bits in USBSTS register

#define PORTSC_CONN            0x01    // Current Connect Status
#define PORTSC_CONN_CHANGE     0x02    // Connect Status Change
#define PORTSC_ENABLED         0x04    // Port Enable / Disable
#define PORTSC_ENABLE_CHANGE   0x08    // Port Enable / Disable Change
#define PORTSC_OVERCUR         0x10    // Over current Active
#define PORTSC_OVERCUR_CHANGE  0x20    // Over current Change
#define PORSTSC_RESUME         0x40    // Force Port Resume
#define PORTSC_SUSPEND         0x80    // Port Suspend State
#define PORTSC_RESET           0x100   // Port Reset
#define PORTSC_LINESTATE_K     0x400   // Line Status K-state
#define PORTSC_LINESTATE_J     0x800   // Line Status J-state
#define PORTSC_POWER           0x1000  // Port Power
#define PORTSC_OWNER           0x2000  // Port Owner
#define PORTSC_CHANGE_MASK     0x2A    // Mask of the port change bits,
                                       // they are WC (write clean)
//
// PCI Configuration Registers
//
#define EHC_BAR_INDEX  0               // how many bytes away from USB_BASE to 0x10

//
// Debug port capability id
//
#define EHC_DEBUG_PORT_CAP_ID  0x0A

#define EHC_LINK_TERMINATED(Link)  (((Link) & 0x01) != 0)

#define EHC_ADDR(High, QhHw32)   \
        ((VOID *) (UINTN) (LShiftU64 ((High), 32) | ((QhHw32) & 0xFFFFFFF0)))

#define EHCI_IS_DATAIN(EndpointAddr)  EHC_BIT_IS_SET((EndpointAddr), 0x80)

//
// Structure to map the hardware port states to the
// UEFI's port states.
//
typedef struct {
  UINT16    HwState;
  UINT16    UefiState;
} USB_PORT_STATE_MAP;

//
// Ehci Data and Ctrl Structures
//
#pragma pack(1)
typedef struct {
  UINT8    ProgInterface;
  UINT8    SubClassCode;
  UINT8    BaseCode;
} USB_CLASSC;
#pragma pack()

/**
  Read EHCI capability register.

  @param  Ehc     The EHCI device.
  @param  Offset  Capability register address.

  @return The register content.

**/
UINT32
EhcReadCapRegister (
  IN  USB2_HC_DEV  *Ehc,
  IN  UINT32       Offset
  );

/**
  Check whether the host controller has an in-use debug port.

  @param[in] Ehc         The Enhanced Host Controller to query.

  @param[in] PortNumber  If PortNumber is not NULL, then query whether
                         PortNumber is an in-use debug port on Ehc. (PortNumber
                         is taken in UEFI notation, i.e., zero-based.)
                         Otherwise, query whether Ehc has any in-use debug
                         port.

  @retval TRUE   PortNumber is an in-use debug port on Ehc (if PortNumber is
                 not NULL), or some port on Ehc is an in-use debug port
                 (otherwise).

  @retval FALSE  PortNumber is not an in-use debug port on Ehc (if PortNumber
                 is not NULL), or no port on Ehc is an in-use debug port
                 (otherwise).
**/
BOOLEAN
EhcIsDebugPortInUse (
  IN CONST USB2_HC_DEV  *Ehc,
  IN CONST UINT8        *PortNumber OPTIONAL
  );

/**
  Read EHCI Operation register.

  @param  Ehc      The EHCI device.
  @param  Offset   The operation register offset.

  @return The register content.

**/
UINT32
EhcReadOpReg (
  IN  USB2_HC_DEV  *Ehc,
  IN  UINT32       Offset
  );

/**
  Write  the data to the EHCI operation register.

  @param  Ehc      The EHCI device.
  @param  Offset   EHCI operation register offset.
  @param  Data     The data to write.

**/
VOID
EhcWriteOpReg (
  IN USB2_HC_DEV  *Ehc,
  IN UINT32       Offset,
  IN UINT32       Data
  );

/**
  Set one bit of the operational register while keeping other bits.

  @param  Ehc          The EHCI device.
  @param  Offset       The offset of the operational register.
  @param  Bit          The bit mask of the register to set.

**/
VOID
EhcSetOpRegBit (
  IN USB2_HC_DEV  *Ehc,
  IN UINT32       Offset,
  IN UINT32       Bit
  );

/**
  Clear one bit of the operational register while keeping other bits.

  @param  Ehc          The EHCI device.
  @param  Offset       The offset of the operational register.
  @param  Bit          The bit mask of the register to clear.

**/
VOID
EhcClearOpRegBit (
  IN USB2_HC_DEV  *Ehc,
  IN UINT32       Offset,
  IN UINT32       Bit
  );

/**
  Add support for UEFI Over Legacy (UoL) feature, stop
  the legacy USB SMI support.

  @param  Ehc      The EHCI device.

**/
VOID
EhcClearLegacySupport (
  IN USB2_HC_DEV  *Ehc
  );

/**
  Set door bell and wait it to be ACKed by host controller.
  This function is used to synchronize with the hardware.

  @param  Ehc          The EHCI device.
  @param  Timeout      The time to wait before abort (in millisecond, ms).

  @retval EFI_SUCCESS  Synchronized with the hardware.
  @retval EFI_TIMEOUT  Time out happened while waiting door bell to set.

**/
EFI_STATUS
EhcSetAndWaitDoorBell (
  IN  USB2_HC_DEV  *Ehc,
  IN  UINT32       Timeout
  );

/**
  Clear all the interrutp status bits, these bits are Write-Clean.

  @param  Ehc      The EHCI device.

**/
VOID
EhcAckAllInterrupt (
  IN  USB2_HC_DEV  *Ehc
  );

/**
  Whether Ehc is halted.

  @param  Ehc     The EHCI device.

  @retval TRUE    The controller is halted.
  @retval FALSE   It isn't halted.

**/
BOOLEAN
EhcIsHalt (
  IN USB2_HC_DEV  *Ehc
  );

/**
  Whether system error occurred.

  @param  Ehc      The EHCI device.

  @retval TRUE     System error happened.
  @retval FALSE    No system error.

**/
BOOLEAN
EhcIsSysError (
  IN USB2_HC_DEV  *Ehc
  );

/**
  Reset the host controller.

  @param  Ehc          The EHCI device.
  @param  Timeout      Time to wait before abort (in millisecond, ms).

  @retval EFI_SUCCESS  The host controller is reset.
  @return Others       Failed to reset the host.

**/
EFI_STATUS
EhcResetHC (
  IN USB2_HC_DEV  *Ehc,
  IN UINT32       Timeout
  );

/**
  Halt the host controller.

  @param  Ehc          The EHCI device.
  @param  Timeout      Time to wait before abort.

  @return EFI_SUCCESS  The EHCI is halt.
  @return EFI_TIMEOUT  Failed to halt the controller before Timeout.

**/
EFI_STATUS
EhcHaltHC (
  IN USB2_HC_DEV  *Ehc,
  IN UINT32       Timeout
  );

/**
  Set the EHCI to run.

  @param  Ehc          The EHCI device.
  @param  Timeout      Time to wait before abort.

  @return EFI_SUCCESS  The EHCI is running.
  @return Others       Failed to set the EHCI to run.

**/
EFI_STATUS
EhcRunHC (
  IN USB2_HC_DEV  *Ehc,
  IN UINT32       Timeout
  );

/**
  Initialize the HC hardware.
  EHCI spec lists the five things to do to initialize the hardware:
  1. Program CTRLDSSEGMENT
  2. Set USBINTR to enable interrupts
  3. Set periodic list base
  4. Set USBCMD, interrupt threshold, frame list size etc
  5. Write 1 to CONFIGFLAG to route all ports to EHCI

  @param  Ehc          The EHCI device.

  @return EFI_SUCCESS  The EHCI has come out of halt state.
  @return EFI_TIMEOUT  Time out happened.

**/
EFI_STATUS
EhcInitHC (
  IN USB2_HC_DEV  *Ehc
  );

#endif