sravan/system76-edk2
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
d0f946f30dea2c56e94e14c5ccfd327eac2da43f
system76-edk2/QuarkSocPkg/QuarkSouthCluster/Include/MMC.h
Michael Kinney 9b6bbcdbfd QuarkSocPkg: Add new package for Quark SoC X1000 
Changes for V4
==============
1) Remove Unicode character from C source file
2) Move delete of QuarkSocPkg\QuarkNorthCluster\Binary\QuarkMicrocode
   from QuarkPlatformPkg commit to QuarkSocPkg commit

Changes for V2
==============
1) Sync with new APIs in SmmCpuFeaturesLib class
2) Use new generic PCI serial driver PciSioSerialDxe in MdeModulePkg
3) Remove PCI serial driver from QuarkSocPkg
4) Apply optimizations to MtrrLib from MtrrLib in UefiCpuPkg
5) Convert all UNI files to utf-8
6) Replace tabs with spaces and remove trailing spaces
7) Add License.txt

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19286 6f19259b-4bc3-4df7-8a09-765794883524
2015-12-15 19:22:23 +00:00

281 lines
11 KiB
C
Raw Blame History

/** @file
Header file for Industry MMC 4.2 spec.
Copyright (c) 2013-2015 Intel Corporation.
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef _MMC_H
#define _MMC_H
#pragma pack(1)
//
//Command definition
//
#define CMD0 0
#define CMD1 1
#define CMD2 2
#define CMD3 3
#define CMD4 4
#define CMD6 6
#define CMD7 7
#define CMD8 8
#define CMD9 9
#define CMD10 10
#define CMD11 11
#define CMD12 12
#define CMD13 13
#define CMD14 14
#define CMD15 15
#define CMD16 16
#define CMD17 17
#define CMD18 18
#define CMD19 19
#define CMD20 20
#define CMD23 23
#define CMD24 24
#define CMD25 25
#define CMD26 26
#define CMD27 27
#define CMD28 28
#define CMD29 29
#define CMD30 30
#define CMD35 35
#define CMD36 36
#define CMD38 38
#define CMD39 39
#define CMD40 40
#define CMD42 42
#define CMD55 55
#define CMD56 56
#define GO_IDLE_STATE CMD0
#define SEND_OP_COND CMD1
#define ALL_SEND_CID CMD2
#define SET_RELATIVE_ADDR CMD3
#define SET_DSR CMD4
#define SWITCH CMD6
#define SELECT_DESELECT_CARD CMD7
#define SEND_EXT_CSD CMD8
#define SEND_CSD CMD9
#define SEND_CID CMD10
#define READ_DAT_UNTIL_STOP CMD11
#define STOP_TRANSMISSION CMD12
#define SEND_STATUS CMD13
#define BUSTEST_R CMD14
#define GO_INACTIVE_STATE CMD15
#define SET_BLOCKLEN CMD16
#define READ_SINGLE_BLOCK CMD17
#define READ_MULTIPLE_BLOCK CMD18
#define BUSTEST_W CMD19
#define WRITE_DAT_UNTIL_STOP CMD20
#define SET_BLOCK_COUNT CMD23
#define WRITE_BLOCK CMD24
#define WRITE_MULTIPLE_BLOCK CMD25
#define PROGRAM_CID CMD26
#define PROGRAM_CSD CMD27
#define SET_WRITE_PROT CMD28
#define CLR_WRITE_PROT CMD29
#define SEND_WRITE_PROT CMD30
#define ERASE_GROUP_START CMD35
#define ERASE_GROUP_END CMD36
#define ERASE CMD38
#define FAST_IO CMD39
#define GO_IRQ_STATE CMD40
#define LOCK_UNLOCK CMD42
#define APP_CMD CMD55
#define GEN_CMD CMD56
#define CMD_INDEX_MASK 0x3F
#define AUTO_CMD12_ENABLE BIT6
#define AUTO_CMD23_ENABLE BIT7
#define FREQUENCY_OD (400 * 1000)
#define FREQUENCY_MMC_PP (26 * 1000 * 1000)
#define FREQUENCY_MMC_PP_HIGH (52 * 1000 * 1000)
#define DEFAULT_DSR_VALUE 0x404
//
//Registers definition
//
typedef struct {
UINT32 Reserved0: 7; // 0
UINT32 V170_V195: 1; // 1.70V - 1.95V
UINT32 V200_V260: 7; // 2.00V - 2.60V
UINT32 V270_V360: 9; // 2.70V - 3.60V
UINT32 Reserved1: 5; // 0
UINT32 AccessMode: 2; // 00b (byte mode), 10b (sector mode)
UINT32 Busy: 1; // This bit is set to LOW if the card has not finished the power up routine
}OCR;
typedef struct {
UINT8 NotUsed: 1; // 1
UINT8 CRC: 7; // CRC7 checksum
UINT8 MDT; // Manufacturing date
UINT32 PSN; // Product serial number
UINT8 PRV; // Product revision
UINT8 PNM[6]; // Product name
UINT16 OID; // OEM/Application ID
UINT8 MID; // Manufacturer ID
}CID;
typedef struct {
UINT8 NotUsed: 1; // 1 [0:0]
UINT8 CRC: 7; // CRC [7:1]
UINT8 ECC: 2; // ECC code [9:8]
UINT8 FILE_FORMAT: 2; // File format [11:10]
UINT8 TMP_WRITE_PROTECT: 1; // Temporary write protection [12:12]
UINT8 PERM_WRITE_PROTECT: 1; // Permanent write protection [13:13]
UINT8 COPY: 1; // Copy flag (OTP) [14:14]
UINT8 FILE_FORMAT_GRP: 1; // File format group [15:15]
UINT16 CONTENT_PROT_APP: 1; // Content protection application [16:16]
UINT16 Reserved0: 4; // 0 [20:17]
UINT16 WRITE_BL_PARTIAL: 1; // Partial blocks for write allowed [21:21]
UINT16 WRITE_BL_LEN: 4; // Max. write data block length [25:22]
UINT16 R2W_FACTOR: 3; // Write speed factor [28:26]
UINT16 DEFAULT_ECC: 2; // Manufacturer default ECC [30:29]
UINT16 WP_GRP_ENABLE: 1; // Write protect group enable [31:31]
UINT32 WP_GRP_SIZE: 5; // Write protect group size [36:32]
UINT32 ERASE_GRP_MULT: 5; // Erase group size multiplier [41:37]
UINT32 ERASE_GRP_SIZE: 5; // Erase group size [46:42]
UINT32 C_SIZE_MULT: 3; // Device size multiplier [49:47]
UINT32 VDD_W_CURR_MAX: 3; // Max. write current @ VDD max [52:50]
UINT32 VDD_W_CURR_MIN: 3; // Max. write current @ VDD min [55:53]
UINT32 VDD_R_CURR_MAX: 3; // Max. read current @ VDD max [58:56]
UINT32 VDD_R_CURR_MIN: 3; // Max. read current @ VDD min [61:59]
UINT32 C_SIZELow2: 2;// Device size [73:62]
UINT32 C_SIZEHigh10: 10;// Device size [73:62]
UINT32 Reserved1: 2; // 0 [75:74]
UINT32 DSR_IMP: 1; // DSR implemented [76:76]
UINT32 READ_BLK_MISALIGN: 1; // Read block misalignment [77:77]
UINT32 WRITE_BLK_MISALIGN: 1; // Write block misalignment [78:78]
UINT32 READ_BL_PARTIAL: 1; // Partial blocks for read allowed [79:79]
UINT32 READ_BL_LEN: 4; // Max. read data block length [83:80]
UINT32 CCC: 12;// Card command classes [95:84]
UINT8 TRAN_SPEED ; // Max. bus clock frequency [103:96]
UINT8 NSAC ; // Data read access-time 2 in CLK cycles (NSAC*100) [111:104]
UINT8 TAAC ; // Data read access-time 1 [119:112]
UINT8 Reserved2: 2; // 0 [121:120]
UINT8 SPEC_VERS: 4; // System specification version [125:122]
UINT8 CSD_STRUCTURE: 2; // CSD structure [127:126]
}CSD;
typedef struct {
UINT8 Reserved0[181]; // 0 [0:180]
UINT8 ERASED_MEM_CONT; // Erased Memory Content [181]
UINT8 Reserved2; // Erased Memory Content [182]
UINT8 BUS_WIDTH; // Bus Width Mode [183]
UINT8 Reserved3; // 0 [184]
UINT8 HS_TIMING; // High Speed Interface Timing [185]
UINT8 Reserved4; // 0 [186]
UINT8 POWER_CLASS; // Power Class [187]
UINT8 Reserved5; // 0 [188]
UINT8 CMD_SET_REV; // Command Set Revision [189]
UINT8 Reserved6; // 0 [190]
UINT8 CMD_SET; // Command Set [191]
UINT8 EXT_CSD_REV; // Extended CSD Revision [192]
UINT8 Reserved7; // 0 [193]
UINT8 CSD_STRUCTURE; // CSD Structure Version [194]
UINT8 Reserved8; // 0 [195]
UINT8 CARD_TYPE; // Card Type [196]
UINT8 Reserved9[3]; // 0 [199:197]
UINT8 PWR_CL_52_195; // Power Class for 52MHz @ 1.95V [200]
UINT8 PWR_CL_26_195; // Power Class for 26MHz @ 1.95V [201]
UINT8 PWR_CL_52_360; // Power Class for 52MHz @ 3.6V [202]
UINT8 PWR_CL_26_360; // Power Class for 26MHz @ 3.6V [203]
UINT8 Reserved10; // 0 [204]
UINT8 MIN_PERF_R_4_26; // Minimum Read Performance for 4bit @26MHz [205]
UINT8 MIN_PERF_W_4_26; // Minimum Write Performance for 4bit @26MHz [206]
UINT8 MIN_PERF_R_8_26_4_52; // Minimum Read Performance for 8bit @26MHz/4bit @52MHz [207]
UINT8 MIN_PERF_W_8_26_4_52; // Minimum Write Performance for 8bit @26MHz/4bit @52MHz [208]
UINT8 MIN_PERF_R_8_52; // Minimum Read Performance for 8bit @52MHz [209]
UINT8 MIN_PERF_W_8_52; // Minimum Write Performance for 8bit @52MHz [210]
UINT8 Reserved11; // 0 [211]
UINT8 SEC_COUNT[4]; // Sector Count [215:212]
UINT8 Reserved12[288]; // 0 [503:216]
UINT8 S_CMD_SET; // Sector Count [504]
UINT8 Reserved13[7]; // Sector Count [511:505]
}EXT_CSD;
//
//Card Status definition
//
typedef struct {
UINT32 Reserved0: 2; //Reserved for Manufacturer Test Mode
UINT32 Reserved1: 2; //Reserved for Application Specific commands
UINT32 Reserved2: 1; //
UINT32 SAPP_CMD: 1; //
UINT32 Reserved3: 1; //Reserved
UINT32 SWITCH_ERROR: 1; //
UINT32 READY_FOR_DATA: 1; //
UINT32 CURRENT_STATE: 4; //
UINT32 ERASE_RESET: 1; //
UINT32 Reserved4: 1; //Reserved
UINT32 WP_ERASE_SKIP: 1; //
UINT32 CID_CSD_OVERWRITE: 1; //
UINT32 OVERRUN: 1; //
UINT32 UNDERRUN: 1; //
UINT32 ERROR: 1; //
UINT32 CC_ERROR: 1; //
UINT32 CARD_ECC_FAILED: 1; //
UINT32 ILLEGAL_COMMAND: 1; //
UINT32 COM_CRC_ERROR: 1; //
UINT32 LOCK_UNLOCK_FAILED: 1; //
UINT32 CARD_IS_LOCKED: 1; //
UINT32 WP_VIOLATION: 1; //
UINT32 ERASE_PARAM: 1; //
UINT32 ERASE_SEQ_ERROR: 1; //
UINT32 BLOCK_LEN_ERROR: 1; //
UINT32 ADDRESS_MISALIGN: 1; //
UINT32 ADDRESS_OUT_OF_RANGE:1; //
}CARD_STATUS;
typedef struct {
UINT32 CmdSet: 3;
UINT32 Reserved0: 5;
UINT32 Value: 8;
UINT32 Index: 8;
UINT32 Access: 2;
UINT32 Reserved1: 6;
}SWITCH_ARGUMENT;
#define CommandSet_Mode 0
#define SetBits_Mode 1
#define ClearBits_Mode 2
#define WriteByte_Mode 3
#define Idle_STATE 0
#define Ready_STATE 1
#define Ident_STATE 2
#define Stby_STATE 3
#define Tran_STATE 4
#define Data_STATE 5
#define Rcv_STATE 6
#define Prg_STATE 7
#define Dis_STATE 8
#define Btst_STATE 9
#pragma pack()
#endif
Reference in New Issue View Git Blame Copy Permalink