sravan/system76-edk2
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
ef0fa8e16bb50b04cd85cd0ef5ec8b16518fad0f
system76-edk2/MdeModulePkg/Bus/Usb/UsbBusPei/UsbPeim.c
Star Zeng d987459f8e MdeModulePkg XhciPei/UsbBusPei: Add XHCI recovery support. 
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15611 6f19259b-4bc3-4df7-8a09-765794883524
2014-07-02 03:20:49 +00:00

1229 lines
38 KiB
C
Raw Blame History

/** @file
The module to produce Usb Bus PPI.
Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "UsbPeim.h"
#include "HubPeim.h"
#include "PeiUsbLib.h"
//
// UsbIo PPI interface function
//
PEI_USB_IO_PPI mUsbIoPpi = {
PeiUsbControlTransfer,
PeiUsbBulkTransfer,
PeiUsbGetInterfaceDescriptor,
PeiUsbGetEndpointDescriptor,
PeiUsbPortReset
};
EFI_PEI_PPI_DESCRIPTOR mUsbIoPpiList = {
(EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),
&gPeiUsbIoPpiGuid,
NULL
};
/**
The enumeration routine to detect device change.
@param PeiServices Describes the list of possible PEI Services.
@param UsbHcPpi The pointer of PEI_USB_HOST_CONTROLLER_PPI instance.
@param Usb2HcPpi The pointer of PEI_USB2_HOST_CONTROLLER_PPI instance.
@retval EFI_SUCCESS The usb is enumerated successfully.
@retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
@retval Others Other failure occurs.
**/
EFI_STATUS
PeiUsbEnumeration (
IN EFI_PEI_SERVICES **PeiServices,
IN PEI_USB_HOST_CONTROLLER_PPI *UsbHcPpi,
IN PEI_USB2_HOST_CONTROLLER_PPI *Usb2HcPpi
);
/**
Configure new detected usb device.
@param PeiServices Describes the list of possible PEI Services.
@param PeiUsbDevice The pointer of PEI_USB_DEVICE instance.
@param Port The port to be configured.
@param DeviceAddress The device address to be configured.
@retval EFI_SUCCESS The new detected usb device is configured successfully.
@retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
@retval Others Other failure occurs.
**/
EFI_STATUS
PeiConfigureUsbDevice (
IN EFI_PEI_SERVICES **PeiServices,
IN PEI_USB_DEVICE *PeiUsbDevice,
IN UINT8 Port,
IN OUT UINT8 *DeviceAddress
);
/**
Get all configurations from a detected usb device.
@param PeiServices Describes the list of possible PEI Services.
@param PeiUsbDevice The pointer of PEI_USB_DEVICE instance.
@retval EFI_SUCCESS The new detected usb device is configured successfully.
@retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
@retval Others Other failure occurs.
**/
EFI_STATUS
PeiUsbGetAllConfiguration (
IN EFI_PEI_SERVICES **PeiServices,
IN PEI_USB_DEVICE *PeiUsbDevice
);
/**
Get the start position of next wanted descriptor.
@param Buffer Buffer containing data to parse.
@param Length Buffer length.
@param DescType Descriptor type.
@param DescLength Descriptor length.
@param ParsedBytes Bytes has been parsed.
@retval EFI_SUCCESS Get wanted descriptor successfully.
@retval EFI_DEVICE_ERROR Error occurred.
**/
EFI_STATUS
GetExpectedDescriptor (
IN UINT8 *Buffer,
IN UINTN Length,
IN UINT8 DescType,
IN UINT8 DescLength,
OUT UINTN *ParsedBytes
);
/**
The entrypoint of the module, it will enumerate all HCs.
@param FileHandle Handle of the file being invoked.
@param PeiServices Describes the list of possible PEI Services.
@retval EFI_SUCCESS Usb initialization is done successfully.
@retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
@retval EFI_UNSUPPORTED Can't find required PPI.
**/
EFI_STATUS
EFIAPI
PeimInitializeUsb (
IN EFI_PEI_FILE_HANDLE FileHandle,
IN CONST EFI_PEI_SERVICES **PeiServices
)
{
EFI_STATUS Status;
UINTN Index;
PEI_USB_HOST_CONTROLLER_PPI *UsbHcPpi;
PEI_USB2_HOST_CONTROLLER_PPI *Usb2HcPpi;
if (!EFI_ERROR (PeiServicesRegisterForShadow (FileHandle))) {
return EFI_SUCCESS;
}
//
// gPeiUsbHostControllerPpiGuid and gPeiUsb2HostControllerPpiGuid should not
// be produced at the same time
//
Index = 0;
while (TRUE) {
//
// Get UsbHcPpi at first.
//
Status = PeiServicesLocatePpi (
&gPeiUsbHostControllerPpiGuid,
Index,
NULL,
(VOID **) &UsbHcPpi
);
if (EFI_ERROR (Status)) {
//
// No more host controller, break out
//
break;
}
PeiUsbEnumeration ((EFI_PEI_SERVICES **) PeiServices, UsbHcPpi, NULL);
Index++;
}
if (Index == 0) {
//
// Then try to get Usb2HcPpi.
//
while (TRUE) {
Status = PeiServicesLocatePpi (
&gPeiUsb2HostControllerPpiGuid,
Index,
NULL,
(VOID **) &Usb2HcPpi
);
if (EFI_ERROR (Status)) {
//
// No more host controller, break out
//
break;
}
PeiUsbEnumeration ((EFI_PEI_SERVICES **) PeiServices, NULL, Usb2HcPpi);
Index++;
}
}
if (Index == 0) {
return EFI_UNSUPPORTED;
}
return EFI_SUCCESS;
}
/**
The Hub Enumeration just scans the hub ports one time. It also
doesn't support hot-plug.
@param PeiServices Describes the list of possible PEI Services.
@param PeiUsbDevice The pointer of PEI_USB_DEVICE instance.
@param CurrentAddress The DeviceAddress of usb device.
@retval EFI_SUCCESS The usb hub is enumerated successfully.
@retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
@retval Others Other failure occurs.
**/
EFI_STATUS
PeiHubEnumeration (
IN EFI_PEI_SERVICES **PeiServices,
IN PEI_USB_DEVICE *PeiUsbDevice,
IN UINT8 *CurrentAddress
)
{
UINTN Index;
EFI_STATUS Status;
PEI_USB_IO_PPI *UsbIoPpi;
EFI_USB_PORT_STATUS PortStatus;
UINTN MemPages;
EFI_PHYSICAL_ADDRESS AllocateAddress;
PEI_USB_DEVICE *NewPeiUsbDevice;
UINTN InterfaceIndex;
UINTN EndpointIndex;
UsbIoPpi = &PeiUsbDevice->UsbIoPpi;
DEBUG ((EFI_D_INFO, "PeiHubEnumeration: DownStreamPortNo: %x\n", PeiUsbDevice->DownStreamPortNo));
for (Index = 0; Index < PeiUsbDevice->DownStreamPortNo; Index++) {
Status = PeiHubGetPortStatus (
PeiServices,
UsbIoPpi,
(UINT8) (Index + 1),
(UINT32 *) &PortStatus
);
if (EFI_ERROR (Status)) {
continue;
}
DEBUG ((EFI_D_INFO, "USB Status --- Port: %x ConnectChange[%04x] Status[%04x]\n", Index, PortStatus.PortChangeStatus, PortStatus.PortStatus));
//
// Only handle connection/enable/overcurrent/reset change.
//
if ((PortStatus.PortChangeStatus & (USB_PORT_STAT_C_CONNECTION | USB_PORT_STAT_C_ENABLE | USB_PORT_STAT_C_OVERCURRENT | USB_PORT_STAT_C_RESET)) == 0) {
continue;
} else {
if (IsPortConnect (PortStatus.PortStatus)) {
//
// Begin to deal with the new device
//
MemPages = sizeof (PEI_USB_DEVICE) / EFI_PAGE_SIZE + 1;
Status = PeiServicesAllocatePages (
EfiBootServicesCode,
MemPages,
&AllocateAddress
);
if (EFI_ERROR (Status)) {
return EFI_OUT_OF_RESOURCES;
}
NewPeiUsbDevice = (PEI_USB_DEVICE *) ((UINTN) AllocateAddress);
ZeroMem (NewPeiUsbDevice, sizeof (PEI_USB_DEVICE));
NewPeiUsbDevice->Signature = PEI_USB_DEVICE_SIGNATURE;
NewPeiUsbDevice->DeviceAddress = 0;
NewPeiUsbDevice->MaxPacketSize0 = 8;
NewPeiUsbDevice->DataToggle = 0;
CopyMem (
&(NewPeiUsbDevice->UsbIoPpi),
&mUsbIoPpi,
sizeof (PEI_USB_IO_PPI)
);
CopyMem (
&(NewPeiUsbDevice->UsbIoPpiList),
&mUsbIoPpiList,
sizeof (EFI_PEI_PPI_DESCRIPTOR)
);
NewPeiUsbDevice->UsbIoPpiList.Ppi = &NewPeiUsbDevice->UsbIoPpi;
NewPeiUsbDevice->AllocateAddress = (UINTN) AllocateAddress;
NewPeiUsbDevice->UsbHcPpi = PeiUsbDevice->UsbHcPpi;
NewPeiUsbDevice->Usb2HcPpi = PeiUsbDevice->Usb2HcPpi;
NewPeiUsbDevice->Tier = (UINT8) (PeiUsbDevice->Tier + 1);
NewPeiUsbDevice->IsHub = 0x0;
NewPeiUsbDevice->DownStreamPortNo = 0x0;
if (((PortStatus.PortChangeStatus & USB_PORT_STAT_C_RESET) == 0) ||
((PortStatus.PortStatus & (USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE)) == 0)) {
//
// If the port already has reset change flag and is connected and enabled, skip the port reset logic.
//
PeiResetHubPort (PeiServices, UsbIoPpi, (UINT8)(Index + 1));
PeiHubGetPortStatus (
PeiServices,
UsbIoPpi,
(UINT8) (Index + 1),
(UINT32 *) &PortStatus
);
} else {
PeiHubClearPortFeature (
PeiServices,
UsbIoPpi,
(UINT8) (Index + 1),
EfiUsbPortResetChange
);
}
NewPeiUsbDevice->DeviceSpeed = (UINT8) PeiUsbGetDeviceSpeed (PortStatus.PortStatus);
DEBUG ((EFI_D_INFO, "Device Speed =%d\n", PeiUsbDevice->DeviceSpeed));
if (USB_BIT_IS_SET (PortStatus.PortStatus, USB_PORT_STAT_SUPER_SPEED)){
NewPeiUsbDevice->MaxPacketSize0 = 512;
} else if (USB_BIT_IS_SET (PortStatus.PortStatus, USB_PORT_STAT_HIGH_SPEED)) {
NewPeiUsbDevice->MaxPacketSize0 = 64;
} else if (USB_BIT_IS_SET (PortStatus.PortStatus, USB_PORT_STAT_LOW_SPEED)) {
NewPeiUsbDevice->MaxPacketSize0 = 8;
} else {
NewPeiUsbDevice->MaxPacketSize0 = 8;
}
if(NewPeiUsbDevice->DeviceSpeed != EFI_USB_SPEED_HIGH) {
if (PeiUsbDevice->DeviceSpeed == EFI_USB_SPEED_HIGH) {
NewPeiUsbDevice->Translator.TranslatorPortNumber = (UINT8)Index;
NewPeiUsbDevice->Translator.TranslatorHubAddress = *CurrentAddress;
} else {
CopyMem(&(NewPeiUsbDevice->Translator), &(PeiUsbDevice->Translator), sizeof(EFI_USB2_HC_TRANSACTION_TRANSLATOR));
}
}
//
// Configure that Usb Device
//
Status = PeiConfigureUsbDevice (
PeiServices,
NewPeiUsbDevice,
(UINT8) (Index + 1),
CurrentAddress
);
if (EFI_ERROR (Status)) {
continue;
}
DEBUG ((EFI_D_INFO, "PeiHubEnumeration: PeiConfigureUsbDevice Success\n"));
Status = PeiServicesInstallPpi (&NewPeiUsbDevice->UsbIoPpiList);
if (NewPeiUsbDevice->InterfaceDesc->InterfaceClass == 0x09) {
NewPeiUsbDevice->IsHub = 0x1;
Status = PeiDoHubConfig (PeiServices, NewPeiUsbDevice);
if (EFI_ERROR (Status)) {
return Status;
}
PeiHubEnumeration (PeiServices, NewPeiUsbDevice, CurrentAddress);
}
for (InterfaceIndex = 1; InterfaceIndex < NewPeiUsbDevice->ConfigDesc->NumInterfaces; InterfaceIndex++) {
//
// Begin to deal with the new device
//
MemPages = sizeof (PEI_USB_DEVICE) / EFI_PAGE_SIZE + 1;
Status = PeiServicesAllocatePages (
EfiBootServicesCode,
MemPages,
&AllocateAddress
);
if (EFI_ERROR (Status)) {
return EFI_OUT_OF_RESOURCES;
}
CopyMem ((VOID *)(UINTN)AllocateAddress, NewPeiUsbDevice, sizeof (PEI_USB_DEVICE));
NewPeiUsbDevice = (PEI_USB_DEVICE *) ((UINTN) AllocateAddress);
NewPeiUsbDevice->AllocateAddress = (UINTN) AllocateAddress;
NewPeiUsbDevice->UsbIoPpiList.Ppi = &NewPeiUsbDevice->UsbIoPpi;
NewPeiUsbDevice->InterfaceDesc = NewPeiUsbDevice->InterfaceDescList[InterfaceIndex];
for (EndpointIndex = 0; EndpointIndex < NewPeiUsbDevice->InterfaceDesc->NumEndpoints; EndpointIndex++) {
NewPeiUsbDevice->EndpointDesc[EndpointIndex] = NewPeiUsbDevice->EndpointDescList[InterfaceIndex][EndpointIndex];
}
Status = PeiServicesInstallPpi (&NewPeiUsbDevice->UsbIoPpiList);
if (NewPeiUsbDevice->InterfaceDesc->InterfaceClass == 0x09) {
NewPeiUsbDevice->IsHub = 0x1;
Status = PeiDoHubConfig (PeiServices, NewPeiUsbDevice);
if (EFI_ERROR (Status)) {
return Status;
}
PeiHubEnumeration (PeiServices, NewPeiUsbDevice, CurrentAddress);
}
}
}
}
}
return EFI_SUCCESS;
}
/**
The enumeration routine to detect device change.
@param PeiServices Describes the list of possible PEI Services.
@param UsbHcPpi The pointer of PEI_USB_HOST_CONTROLLER_PPI instance.
@param Usb2HcPpi The pointer of PEI_USB2_HOST_CONTROLLER_PPI instance.
@retval EFI_SUCCESS The usb is enumerated successfully.
@retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
@retval Others Other failure occurs.
**/
EFI_STATUS
PeiUsbEnumeration (
IN EFI_PEI_SERVICES **PeiServices,
IN PEI_USB_HOST_CONTROLLER_PPI *UsbHcPpi,
IN PEI_USB2_HOST_CONTROLLER_PPI *Usb2HcPpi
)
{
UINT8 NumOfRootPort;
EFI_STATUS Status;
UINT8 Index;
EFI_USB_PORT_STATUS PortStatus;
PEI_USB_DEVICE *PeiUsbDevice;
UINTN MemPages;
EFI_PHYSICAL_ADDRESS AllocateAddress;
UINT8 CurrentAddress;
UINTN InterfaceIndex;
UINTN EndpointIndex;
CurrentAddress = 0;
if (Usb2HcPpi != NULL) {
Usb2HcPpi->GetRootHubPortNumber (
PeiServices,
Usb2HcPpi,
(UINT8 *) &NumOfRootPort
);
} else if (UsbHcPpi != NULL) {
UsbHcPpi->GetRootHubPortNumber (
PeiServices,
UsbHcPpi,
(UINT8 *) &NumOfRootPort
);
} else {
ASSERT (FALSE);
return EFI_INVALID_PARAMETER;
}
DEBUG ((EFI_D_INFO, "PeiUsbEnumeration: NumOfRootPort: %x\n", NumOfRootPort));
for (Index = 0; Index < NumOfRootPort; Index++) {
//
// First get root port status to detect changes happen
//
if (Usb2HcPpi != NULL) {
Usb2HcPpi->GetRootHubPortStatus (
PeiServices,
Usb2HcPpi,
(UINT8) Index,
&PortStatus
);
} else {
UsbHcPpi->GetRootHubPortStatus (
PeiServices,
UsbHcPpi,
(UINT8) Index,
&PortStatus
);
}
DEBUG ((EFI_D_INFO, "USB Status --- Port: %x ConnectChange[%04x] Status[%04x]\n", Index, PortStatus.PortChangeStatus, PortStatus.PortStatus));
//
// Only handle connection/enable/overcurrent/reset change.
//
if ((PortStatus.PortChangeStatus & (USB_PORT_STAT_C_CONNECTION | USB_PORT_STAT_C_ENABLE | USB_PORT_STAT_C_OVERCURRENT | USB_PORT_STAT_C_RESET)) == 0) {
continue;
} else {
if (IsPortConnect (PortStatus.PortStatus)) {
MemPages = sizeof (PEI_USB_DEVICE) / EFI_PAGE_SIZE + 1;
Status = PeiServicesAllocatePages (
EfiBootServicesCode,
MemPages,
&AllocateAddress
);
if (EFI_ERROR (Status)) {
return EFI_OUT_OF_RESOURCES;
}
PeiUsbDevice = (PEI_USB_DEVICE *) ((UINTN) AllocateAddress);
ZeroMem (PeiUsbDevice, sizeof (PEI_USB_DEVICE));
PeiUsbDevice->Signature = PEI_USB_DEVICE_SIGNATURE;
PeiUsbDevice->DeviceAddress = 0;
PeiUsbDevice->MaxPacketSize0 = 8;
PeiUsbDevice->DataToggle = 0;
CopyMem (
&(PeiUsbDevice->UsbIoPpi),
&mUsbIoPpi,
sizeof (PEI_USB_IO_PPI)
);
CopyMem (
&(PeiUsbDevice->UsbIoPpiList),
&mUsbIoPpiList,
sizeof (EFI_PEI_PPI_DESCRIPTOR)
);
PeiUsbDevice->UsbIoPpiList.Ppi = &PeiUsbDevice->UsbIoPpi;
PeiUsbDevice->AllocateAddress = (UINTN) AllocateAddress;
PeiUsbDevice->UsbHcPpi = UsbHcPpi;
PeiUsbDevice->Usb2HcPpi = Usb2HcPpi;
PeiUsbDevice->IsHub = 0x0;
PeiUsbDevice->DownStreamPortNo = 0x0;
if (((PortStatus.PortChangeStatus & USB_PORT_STAT_C_RESET) == 0) ||
((PortStatus.PortStatus & (USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE)) == 0)) {
//
// If the port already has reset change flag and is connected and enabled, skip the port reset logic.
//
ResetRootPort (
PeiServices,
PeiUsbDevice->UsbHcPpi,
PeiUsbDevice->Usb2HcPpi,
Index,
0
);
if (Usb2HcPpi != NULL) {
Usb2HcPpi->GetRootHubPortStatus (
PeiServices,
Usb2HcPpi,
(UINT8) Index,
&PortStatus
);
} else {
UsbHcPpi->GetRootHubPortStatus (
PeiServices,
UsbHcPpi,
(UINT8) Index,
&PortStatus
);
}
} else {
if (Usb2HcPpi != NULL) {
Usb2HcPpi->ClearRootHubPortFeature (
PeiServices,
Usb2HcPpi,
(UINT8) Index,
EfiUsbPortResetChange
);
} else {
UsbHcPpi->ClearRootHubPortFeature (
PeiServices,
UsbHcPpi,
(UINT8) Index,
EfiUsbPortResetChange
);
}
}
PeiUsbDevice->DeviceSpeed = (UINT8) PeiUsbGetDeviceSpeed (PortStatus.PortStatus);
DEBUG ((EFI_D_INFO, "Device Speed =%d\n", PeiUsbDevice->DeviceSpeed));
if (USB_BIT_IS_SET (PortStatus.PortStatus, USB_PORT_STAT_SUPER_SPEED)){
PeiUsbDevice->MaxPacketSize0 = 512;
} else if (USB_BIT_IS_SET (PortStatus.PortStatus, USB_PORT_STAT_HIGH_SPEED)) {
PeiUsbDevice->MaxPacketSize0 = 64;
} else if (USB_BIT_IS_SET (PortStatus.PortStatus, USB_PORT_STAT_LOW_SPEED)) {
PeiUsbDevice->MaxPacketSize0 = 8;
} else {
PeiUsbDevice->MaxPacketSize0 = 8;
}
//
// Configure that Usb Device
//
Status = PeiConfigureUsbDevice (
PeiServices,
PeiUsbDevice,
Index,
&CurrentAddress
);
if (EFI_ERROR (Status)) {
continue;
}
DEBUG ((EFI_D_INFO, "PeiUsbEnumeration: PeiConfigureUsbDevice Success\n"));
Status = PeiServicesInstallPpi (&PeiUsbDevice->UsbIoPpiList);
if (PeiUsbDevice->InterfaceDesc->InterfaceClass == 0x09) {
PeiUsbDevice->IsHub = 0x1;
Status = PeiDoHubConfig (PeiServices, PeiUsbDevice);
if (EFI_ERROR (Status)) {
return Status;
}
PeiHubEnumeration (PeiServices, PeiUsbDevice, &CurrentAddress);
}
for (InterfaceIndex = 1; InterfaceIndex < PeiUsbDevice->ConfigDesc->NumInterfaces; InterfaceIndex++) {
//
// Begin to deal with the new device
//
MemPages = sizeof (PEI_USB_DEVICE) / EFI_PAGE_SIZE + 1;
Status = PeiServicesAllocatePages (
EfiBootServicesCode,
MemPages,
&AllocateAddress
);
if (EFI_ERROR (Status)) {
return EFI_OUT_OF_RESOURCES;
}
CopyMem ((VOID *)(UINTN)AllocateAddress, PeiUsbDevice, sizeof (PEI_USB_DEVICE));
PeiUsbDevice = (PEI_USB_DEVICE *) ((UINTN) AllocateAddress);
PeiUsbDevice->AllocateAddress = (UINTN) AllocateAddress;
PeiUsbDevice->UsbIoPpiList.Ppi = &PeiUsbDevice->UsbIoPpi;
PeiUsbDevice->InterfaceDesc = PeiUsbDevice->InterfaceDescList[InterfaceIndex];
for (EndpointIndex = 0; EndpointIndex < PeiUsbDevice->InterfaceDesc->NumEndpoints; EndpointIndex++) {
PeiUsbDevice->EndpointDesc[EndpointIndex] = PeiUsbDevice->EndpointDescList[InterfaceIndex][EndpointIndex];
}
Status = PeiServicesInstallPpi (&PeiUsbDevice->UsbIoPpiList);
if (PeiUsbDevice->InterfaceDesc->InterfaceClass == 0x09) {
PeiUsbDevice->IsHub = 0x1;
Status = PeiDoHubConfig (PeiServices, PeiUsbDevice);
if (EFI_ERROR (Status)) {
return Status;
}
PeiHubEnumeration (PeiServices, PeiUsbDevice, &CurrentAddress);
}
}
} else {
//
// Disconnect change happen, currently we don't support
//
}
}
}
return EFI_SUCCESS;
}
/**
Configure new detected usb device.
@param PeiServices Describes the list of possible PEI Services.
@param PeiUsbDevice The pointer of PEI_USB_DEVICE instance.
@param Port The port to be configured.
@param DeviceAddress The device address to be configured.
@retval EFI_SUCCESS The new detected usb device is configured successfully.
@retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
@retval Others Other failure occurs.
**/
EFI_STATUS
PeiConfigureUsbDevice (
IN EFI_PEI_SERVICES **PeiServices,
IN PEI_USB_DEVICE *PeiUsbDevice,
IN UINT8 Port,
IN OUT UINT8 *DeviceAddress
)
{
EFI_USB_DEVICE_DESCRIPTOR DeviceDescriptor;
EFI_STATUS Status;
PEI_USB_IO_PPI *UsbIoPpi;
UINT8 Retry;
UsbIoPpi = &PeiUsbDevice->UsbIoPpi;
Status = EFI_SUCCESS;
ZeroMem (&DeviceDescriptor, sizeof (EFI_USB_DEVICE_DESCRIPTOR));
//
// Get USB device descriptor
//
for (Retry = 0; Retry < 3; Retry ++) {
Status = PeiUsbGetDescriptor (
PeiServices,
UsbIoPpi,
(USB_DT_DEVICE << 8),
0,
8,
&DeviceDescriptor
);
if (!EFI_ERROR (Status)) {
DEBUG ((EFI_D_INFO, "PeiUsbGet Device Descriptor the %d time Success\n", Retry));
break;
}
}
if (Retry == 3) {
DEBUG ((EFI_D_ERROR, "PeiUsbGet Device Descriptor fail: %x %r\n", Retry, Status));
return Status;
}
if ((DeviceDescriptor.BcdUSB == 0x0300) && (DeviceDescriptor.MaxPacketSize0 == 9)) {
PeiUsbDevice->MaxPacketSize0 = 1 << 9;
} else {
PeiUsbDevice->MaxPacketSize0 = DeviceDescriptor.MaxPacketSize0;
}
(*DeviceAddress) ++;
Status = PeiUsbSetDeviceAddress (
PeiServices,
UsbIoPpi,
*DeviceAddress
);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "PeiUsbSetDeviceAddress Failed: %r\n", Status));
return Status;
}
PeiUsbDevice->DeviceAddress = *DeviceAddress;
//
// Get whole USB device descriptor
//
Status = PeiUsbGetDescriptor (
PeiServices,
UsbIoPpi,
(USB_DT_DEVICE << 8),
0,
(UINT16) sizeof (EFI_USB_DEVICE_DESCRIPTOR),
&DeviceDescriptor
);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "PeiUsbGetDescriptor First Failed\n"));
return Status;
}
//
// Get its default configuration and its first interface
//
Status = PeiUsbGetAllConfiguration (
PeiServices,
PeiUsbDevice
);
if (EFI_ERROR (Status)) {
return Status;
}
Status = PeiUsbSetConfiguration (
PeiServices,
UsbIoPpi
);
if (EFI_ERROR (Status)) {
return Status;
}
return EFI_SUCCESS;
}
/**
Get all configurations from a detected usb device.
@param PeiServices Describes the list of possible PEI Services.
@param PeiUsbDevice The pointer of PEI_USB_DEVICE instance.
@retval EFI_SUCCESS The new detected usb device is configured successfully.
@retval EFI_OUT_OF_RESOURCES Can't allocate memory resource.
@retval Others Other failure occurs.
**/
EFI_STATUS
PeiUsbGetAllConfiguration (
IN EFI_PEI_SERVICES **PeiServices,
IN PEI_USB_DEVICE *PeiUsbDevice
)
{
EFI_STATUS Status;
EFI_USB_CONFIG_DESCRIPTOR *ConfigDesc;
PEI_USB_IO_PPI *UsbIoPpi;
UINT16 ConfigDescLength;
UINT8 *Ptr;
UINTN SkipBytes;
UINTN LengthLeft;
UINTN InterfaceIndex;
UINTN Index;
UINTN NumOfEndpoint;
UsbIoPpi = &PeiUsbDevice->UsbIoPpi;
//
// First get its 4-byte configuration descriptor
//
Status = PeiUsbGetDescriptor (
PeiServices,
UsbIoPpi,
(USB_DT_CONFIG << 8), // Value
0, // Index
4, // Length
PeiUsbDevice->ConfigurationData
);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "PeiUsbGet Config Descriptor First Failed\n"));
return Status;
}
ConfigDesc = (EFI_USB_CONFIG_DESCRIPTOR *) PeiUsbDevice->ConfigurationData;
ConfigDescLength = ConfigDesc->TotalLength;
//
// Then we get the total descriptors for this configuration
//
Status = PeiUsbGetDescriptor (
PeiServices,
UsbIoPpi,
(USB_DT_CONFIG << 8),
0,
ConfigDescLength,
PeiUsbDevice->ConfigurationData
);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "PeiUsbGet Config Descriptor all Failed\n"));
return Status;
}
//
// Parse this configuration descriptor
// First get the current config descriptor;
//
Status = GetExpectedDescriptor (
PeiUsbDevice->ConfigurationData,
ConfigDescLength,
USB_DT_CONFIG,
(UINT8) sizeof (EFI_USB_CONFIG_DESCRIPTOR),
&SkipBytes
);
if (EFI_ERROR (Status)) {
return Status;
}
Ptr = PeiUsbDevice->ConfigurationData + SkipBytes;
PeiUsbDevice->ConfigDesc = (EFI_USB_CONFIG_DESCRIPTOR *) Ptr;
Ptr += sizeof (EFI_USB_CONFIG_DESCRIPTOR);
LengthLeft = ConfigDescLength - SkipBytes - sizeof (EFI_USB_CONFIG_DESCRIPTOR);
for (InterfaceIndex = 0; InterfaceIndex < PeiUsbDevice->ConfigDesc->NumInterfaces; InterfaceIndex++) {
//
// Get the interface descriptor
//
Status = GetExpectedDescriptor (
Ptr,
LengthLeft,
USB_DT_INTERFACE,
(UINT8) sizeof (EFI_USB_INTERFACE_DESCRIPTOR),
&SkipBytes
);
if (EFI_ERROR (Status)) {
return Status;
}
Ptr += SkipBytes;
if (InterfaceIndex == 0) {
PeiUsbDevice->InterfaceDesc = (EFI_USB_INTERFACE_DESCRIPTOR *) Ptr;
}
PeiUsbDevice->InterfaceDescList[InterfaceIndex] = (EFI_USB_INTERFACE_DESCRIPTOR *) Ptr;
Ptr += sizeof (EFI_USB_INTERFACE_DESCRIPTOR);
LengthLeft -= SkipBytes;
LengthLeft -= sizeof (EFI_USB_INTERFACE_DESCRIPTOR);
//
// Parse all the endpoint descriptor within this interface
//
NumOfEndpoint = PeiUsbDevice->InterfaceDescList[InterfaceIndex]->NumEndpoints;
ASSERT (NumOfEndpoint <= MAX_ENDPOINT);
for (Index = 0; Index < NumOfEndpoint; Index++) {
//
// Get the endpoint descriptor
//
Status = GetExpectedDescriptor (
Ptr,
LengthLeft,
USB_DT_ENDPOINT,
(UINT8) sizeof (EFI_USB_ENDPOINT_DESCRIPTOR),
&SkipBytes
);
if (EFI_ERROR (Status)) {
return Status;
}
Ptr += SkipBytes;
if (InterfaceIndex == 0) {
PeiUsbDevice->EndpointDesc[Index] = (EFI_USB_ENDPOINT_DESCRIPTOR *) Ptr;
}
PeiUsbDevice->EndpointDescList[InterfaceIndex][Index] = (EFI_USB_ENDPOINT_DESCRIPTOR *) Ptr;
Ptr += sizeof (EFI_USB_ENDPOINT_DESCRIPTOR);
LengthLeft -= SkipBytes;
LengthLeft -= sizeof (EFI_USB_ENDPOINT_DESCRIPTOR);
}
}
return EFI_SUCCESS;
}
/**
Get the start position of next wanted descriptor.
@param Buffer Buffer containing data to parse.
@param Length Buffer length.
@param DescType Descriptor type.
@param DescLength Descriptor length.
@param ParsedBytes Bytes has been parsed.
@retval EFI_SUCCESS Get wanted descriptor successfully.
@retval EFI_DEVICE_ERROR Error occurred.
**/
EFI_STATUS
GetExpectedDescriptor (
IN UINT8 *Buffer,
IN UINTN Length,
IN UINT8 DescType,
IN UINT8 DescLength,
OUT UINTN *ParsedBytes
)
{
UINT16 DescriptorHeader;
UINT8 Len;
UINT8 *Ptr;
UINTN Parsed;
Parsed = 0;
Ptr = Buffer;
while (TRUE) {
//
// Buffer length should not less than Desc length
//
if (Length < DescLength) {
return EFI_DEVICE_ERROR;
}
DescriptorHeader = (UINT16) (*Ptr + ((*(Ptr + 1)) << 8));
Len = Buffer[0];
//
// Check to see if it is a start of expected descriptor
//
if (DescriptorHeader == ((DescType << 8) | DescLength)) {
break;
}
if ((UINT8) (DescriptorHeader >> 8) == DescType) {
if (Len > DescLength) {
return EFI_DEVICE_ERROR;
}
}
//
// Descriptor length should be at least 2
// and should not exceed the buffer length
//
if (Len < 2) {
return EFI_DEVICE_ERROR;
}
if (Len > Length) {
return EFI_DEVICE_ERROR;
}
//
// Skip this mismatch descriptor
//
Length -= Len;
Ptr += Len;
Parsed += Len;
}
*ParsedBytes = Parsed;
return EFI_SUCCESS;
}
/**
Send reset signal over the given root hub port.
@param PeiServices Describes the list of possible PEI Services.
@param UsbHcPpi The pointer of PEI_USB_HOST_CONTROLLER_PPI instance.
@param Usb2HcPpi The pointer of PEI_USB2_HOST_CONTROLLER_PPI instance.
@param PortNum The port to be reset.
@param RetryIndex The retry times.
**/
VOID
ResetRootPort (
IN EFI_PEI_SERVICES **PeiServices,
IN PEI_USB_HOST_CONTROLLER_PPI *UsbHcPpi,
IN PEI_USB2_HOST_CONTROLLER_PPI *Usb2HcPpi,
IN UINT8 PortNum,
IN UINT8 RetryIndex
)
{
EFI_STATUS Status;
UINTN Index;
EFI_USB_PORT_STATUS PortStatus;
if (Usb2HcPpi != NULL) {
MicroSecondDelay (200 * 1000);
//
// reset root port
//
Status = Usb2HcPpi->SetRootHubPortFeature (
PeiServices,
Usb2HcPpi,
PortNum,
EfiUsbPortReset
);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "SetRootHubPortFeature EfiUsbPortReset Failed\n"));
return;
}
//
// Drive the reset signal for at least 50ms. Check USB 2.0 Spec
// section 7.1.7.5 for timing requirements.
//
MicroSecondDelay (USB_SET_ROOT_PORT_RESET_STALL);
//
// clear reset root port
//
Status = Usb2HcPpi->ClearRootHubPortFeature (
PeiServices,
Usb2HcPpi,
PortNum,
EfiUsbPortReset
);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "ClearRootHubPortFeature EfiUsbPortReset Failed\n"));
return;
}
MicroSecondDelay (USB_CLR_ROOT_PORT_RESET_STALL);
//
// USB host controller won't clear the RESET bit until
// reset is actually finished.
//
ZeroMem (&PortStatus, sizeof (EFI_USB_PORT_STATUS));
for (Index = 0; Index < USB_WAIT_PORT_STS_CHANGE_LOOP; Index++) {
Status = Usb2HcPpi->GetRootHubPortStatus (
PeiServices,
Usb2HcPpi,
PortNum,
&PortStatus
);
if (EFI_ERROR (Status)) {
return;
}
if (!USB_BIT_IS_SET (PortStatus.PortStatus, USB_PORT_STAT_RESET)) {
break;
}
MicroSecondDelay (USB_WAIT_PORT_STS_CHANGE_STALL);
}
if (Index == USB_WAIT_PORT_STS_CHANGE_LOOP) {
DEBUG ((EFI_D_ERROR, "ResetRootPort: reset not finished in time on port %d\n", PortNum));
return;
}
Usb2HcPpi->ClearRootHubPortFeature (
PeiServices,
Usb2HcPpi,
PortNum,
EfiUsbPortResetChange
);
Usb2HcPpi->ClearRootHubPortFeature (
PeiServices,
Usb2HcPpi,
PortNum,
EfiUsbPortConnectChange
);
//
// Set port enable
//
Usb2HcPpi->SetRootHubPortFeature(
PeiServices,
Usb2HcPpi,
PortNum,
EfiUsbPortEnable
);
Usb2HcPpi->ClearRootHubPortFeature (
PeiServices,
Usb2HcPpi,
PortNum,
EfiUsbPortEnableChange
);
MicroSecondDelay ((RetryIndex + 1) * 50 * 1000);
} else {
MicroSecondDelay (200 * 1000);
//
// reset root port
//
Status = UsbHcPpi->SetRootHubPortFeature (
PeiServices,
UsbHcPpi,
PortNum,
EfiUsbPortReset
);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "SetRootHubPortFeature EfiUsbPortReset Failed\n"));
return;
}
//
// Drive the reset signal for at least 50ms. Check USB 2.0 Spec
// section 7.1.7.5 for timing requirements.
//
MicroSecondDelay (USB_SET_ROOT_PORT_RESET_STALL);
//
// clear reset root port
//
Status = UsbHcPpi->ClearRootHubPortFeature (
PeiServices,
UsbHcPpi,
PortNum,
EfiUsbPortReset
);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "ClearRootHubPortFeature EfiUsbPortReset Failed\n"));
return;
}
MicroSecondDelay (USB_CLR_ROOT_PORT_RESET_STALL);
//
// USB host controller won't clear the RESET bit until
// reset is actually finished.
//
ZeroMem (&PortStatus, sizeof (EFI_USB_PORT_STATUS));
for (Index = 0; Index < USB_WAIT_PORT_STS_CHANGE_LOOP; Index++) {
Status = UsbHcPpi->GetRootHubPortStatus (
PeiServices,
UsbHcPpi,
PortNum,
&PortStatus
);
if (EFI_ERROR (Status)) {
return;
}
if (!USB_BIT_IS_SET (PortStatus.PortStatus, USB_PORT_STAT_RESET)) {
break;
}
MicroSecondDelay (USB_WAIT_PORT_STS_CHANGE_STALL);
}
if (Index == USB_WAIT_PORT_STS_CHANGE_LOOP) {
DEBUG ((EFI_D_ERROR, "ResetRootPort: reset not finished in time on port %d\n", PortNum));
return;
}
UsbHcPpi->ClearRootHubPortFeature (
PeiServices,
UsbHcPpi,
PortNum,
EfiUsbPortResetChange
);
UsbHcPpi->ClearRootHubPortFeature (
PeiServices,
UsbHcPpi,
PortNum,
EfiUsbPortConnectChange
);
//
// Set port enable
//
UsbHcPpi->SetRootHubPortFeature(
PeiServices,
UsbHcPpi,
PortNum,
EfiUsbPortEnable
);
UsbHcPpi->ClearRootHubPortFeature (
PeiServices,
UsbHcPpi,
PortNum,
EfiUsbPortEnableChange
);
MicroSecondDelay ((RetryIndex + 1) * 50 * 1000);
}
return;
}
Reference in New Issue View Git Blame Copy Permalink