Disable clang-format for sensitive blocks

Things like macro blocks should not be auto-formatted.

Signed-off-by: Tim Crawford <tcrawford@system76.com>

src/arch/avr/include/arch/gpio.h

@@ -16,12 +16,14 @@ struct Gpio {
     uint8_t value;
 };
 
+// clang-format off
 #define GPIO(BLOCK, NUMBER) { \
     .pin = &PIN ## BLOCK, \
     .ddr = &DDR ## BLOCK, \
     .port = &PORT ## BLOCK, \
     .value = BIT(NUMBER), \
 }
+// clang-format on
 
 bool gpio_get(struct Gpio * gpio);
 void gpio_set(struct Gpio * gpio, bool value);

src/arch/avr/uart.c

@@ -6,6 +6,7 @@
 #include <arch/uart.h>
 #include <board/cpu.h>
 
+// clang-format off
 #define UART(N) \
     { \
         &UCSR ## N ## A, \
@@ -39,6 +40,7 @@
 #else
     #error "Could not find UART definitions"
 #endif
+// clang-format on
 
 int16_t uart_count() {
     return sizeof(UARTS)/sizeof(struct Uart);

src/board/arduino/mega2560/parallel.c

@@ -11,6 +11,7 @@
 #include <arch/gpio.h>
 #include <arch/uart.h>
 
+// clang-format off
 // Mapping of 24-pin ribbon cable to parallel pins. See schematic
 #define PINS \
     /* Data (KSO0 - KSO7) - bi-directional */ \
@@ -88,6 +89,7 @@ static struct Gpio GPIOS[24] = {
     GPIO(A, 0), GPIO(A, 1),
 };
 #endif // !defined(FLIP)
+// clang-format on
 
 enum ParallelState {
     PARALLEL_STATE_UNKNOWN,

src/board/arduino/uno/parallel.c

@@ -11,6 +11,7 @@
 #include <arch/gpio.h>
 #include <arch/uart.h>
 
+// clang-format off
 // Mapping of 24-pin ribbon cable to parallel pins. See schematic
 #define PINS \
     /* Data (KSO0 - KSO7) - bi-directional */ \
@@ -64,7 +65,7 @@ static struct Gpio GPIOS[13] = {
     GPIO(C, 1),
     GPIO(C, 0),
 };
-
+// clang-format on
 
 // Parallel struct definition
 // See http://efplus.com/techref/io/parallel/1284/eppmode.htm

src/board/system76/addw1/gpio.c

@@ -3,6 +3,7 @@
 #include <board/gpio.h>
 #include <common/debug.h>
 
+// clang-format off
 struct Gpio __code ACIN_N =         GPIO(B, 6);
 struct Gpio __code AC_PRESENT =     GPIO(E, 7);
 struct Gpio __code ALL_SYS_PWRGD =  GPIO(C, 0);
@@ -39,6 +40,7 @@ struct Gpio __code USB_PWR_EN_N =   GPIO(F, 7);
 struct Gpio __code VA_EC_EN =       GPIO(J, 0); // renamed to SLP_SUS_EC#
 struct Gpio __code WLAN_EN =        GPIO(J, 2);
 struct Gpio __code WLAN_PWR_EN =    GPIO(B, 0);
+// clang-format on
 
 void gpio_init() {
     // Enable LPC reset on GPD2

src/board/system76/addw1/include/board/gpio.h

@@ -8,6 +8,7 @@
 void gpio_init(void);
 void gpio_debug(void);
 
+// clang-format off
 extern struct Gpio __code ACIN_N;
 extern struct Gpio __code AC_PRESENT;
 extern struct Gpio __code ALL_SYS_PWRGD;
@@ -51,5 +52,6 @@ extern struct Gpio __code VA_EC_EN;
 extern struct Gpio __code WLAN_EN;
 extern struct Gpio __code WLAN_PWR_EN;
 #define HAVE_XLP_OUT 0
+// clang-format on
 
 #endif // _BOARD_GPIO_H

src/board/system76/addw2/gpio.c

@@ -3,6 +3,7 @@
 #include <board/gpio.h>
 #include <common/debug.h>
 
+// clang-format off
 struct Gpio __code ACIN_N =         GPIO(B, 0);
 struct Gpio __code AC_PRESENT =     GPIO(E, 1);
 struct Gpio __code ALL_SYS_PWRGD =  GPIO(C, 0);
@@ -37,6 +38,7 @@ struct Gpio __code VA_EC_EN =       GPIO(J, 4);
 struct Gpio __code WLAN_EN =        GPIO(G, 1);
 struct Gpio __code WLAN_PWR_EN =    GPIO(J, 7);
 struct Gpio __code XLP_OUT =        GPIO(B, 4);
+// clang-format on
 
 void gpio_init() {
     // Enable LPC reset on GPD2

src/board/system76/addw2/include/board/gpio.h

@@ -8,6 +8,7 @@
 void gpio_init(void);
 void gpio_debug(void);
 
+// clang-format off
 extern struct Gpio __code ACIN_N;
 extern struct Gpio __code AC_PRESENT;
 extern struct Gpio __code ALL_SYS_PWRGD;
@@ -47,5 +48,6 @@ extern struct Gpio __code VA_EC_EN;
 extern struct Gpio __code WLAN_EN;
 extern struct Gpio __code WLAN_PWR_EN;
 extern struct Gpio __code XLP_OUT;
+// clang-format on
 
 #endif // _BOARD_GPIO_H

src/board/system76/bonw14/gpio.c

@@ -3,6 +3,7 @@
 #include <board/gpio.h>
 #include <common/debug.h>
 
+// clang-format off
 struct Gpio __code ACIN_N =         GPIO(B, 0);
 struct Gpio __code AC_PRESENT =     GPIO(E, 1);
 struct Gpio __code AC_V1_EC =       GPIO(J, 7);
@@ -38,6 +39,7 @@ struct Gpio __code VA_EC_EN =       GPIO(J, 4); // renamed to SLP_SUS#
 struct Gpio __code WLAN_EN =        GPIO(G, 1);
 struct Gpio __code WLAN_PWR_EN =    GPIO(A, 3);
 struct Gpio __code XLP_OUT =        GPIO(B, 4); // renamed to EN_3V
+// clang-format on
 
 void gpio_init() {
     // Enable LPC reset on GPD2

src/board/system76/bonw14/include/board/gpio.h

@@ -8,6 +8,7 @@
 void gpio_init(void);
 void gpio_debug(void);
 
+// clang-format off
 extern struct Gpio __code ACIN_N;
 extern struct Gpio __code AC_PRESENT;
 extern struct Gpio __code AC_V1_EC;
@@ -48,5 +49,6 @@ extern struct Gpio __code VA_EC_EN;
 extern struct Gpio __code WLAN_EN;
 extern struct Gpio __code WLAN_PWR_EN;
 extern struct Gpio __code XLP_OUT;
+// clang-format on
 
 #endif // _BOARD_GPIO_H

src/board/system76/common/acpi.c

@@ -66,6 +66,7 @@ void acpi_reset(void) {
 #endif
 }
 
+// clang-format off
 uint8_t acpi_read(uint8_t addr) {
     uint8_t data = 0;
 
@@ -174,6 +175,7 @@ uint8_t acpi_read(uint8_t addr) {
     TRACE("acpi_read %02X = %02X\n", addr, data);
     return data;
 }
+// clang-format on
 
 void acpi_write(uint8_t addr, uint8_t data) {
     TRACE("acpi_write %02X = %02X\n", addr, data);

src/board/system76/common/kbled.c

@@ -3,6 +3,7 @@
 #include <board/kbled.h>
 #include <common/macro.h>
 
+// clang-format off
 static uint8_t LEVEL_I = 1;
 static const uint8_t __code LEVELS[] = {
     48,
@@ -23,6 +24,7 @@ static const uint32_t __code COLORS[] = {
     0x00FFFF,
     0xFFFF00
 };
+// clang-format on
 
 void kbled_hotkey_color(void) {
     if (COLOR_I < (ARRAY_SIZE(COLORS) - 1)) {

src/board/system76/common/kbled/white_dac.c

@@ -10,6 +10,7 @@
 
 #define KBLED_DACDAT xconcat(DACDAT, KBLED_DAC)
 
+// clang-format off
 static uint8_t __code levels[] = {
     0x00,
     0x80,
@@ -18,6 +19,7 @@ static uint8_t __code levels[] = {
     0xC0,
     0xFF
 };
+// clang-format on
 
 void kbled_init(void) {
     // Enable DAC used for KBLIGHT_ADJ

src/board/system76/darp5/gpio.c

@@ -3,6 +3,7 @@
 #include <board/gpio.h>
 #include <common/debug.h>
 
+// clang-format off
 struct Gpio __code ACIN_N =         GPIO(B, 6);
 struct Gpio __code AC_PRESENT =     GPIO(E, 7);
 struct Gpio __code ALL_SYS_PWRGD =  GPIO(C, 0);
@@ -40,6 +41,7 @@ struct Gpio __code VA_EC_EN =       GPIO(E, 3);
 struct Gpio __code VR_ON =          GPIO(H, 4);
 struct Gpio __code WLAN_EN =        GPIO(H, 5);
 struct Gpio __code WLAN_PWR_EN =    GPIO(J, 4);
+// clang-format on
 
 void gpio_init() {
     // Enable LPC reset on GPD2

src/board/system76/darp5/include/board/gpio.h

@@ -8,6 +8,7 @@
 void gpio_init(void);
 void gpio_debug(void);
 
+// clang-format off
 extern struct Gpio __code ACIN_N;
 extern struct Gpio __code AC_PRESENT;
 extern struct Gpio __code ALL_SYS_PWRGD;
@@ -46,5 +47,6 @@ extern struct Gpio __code VR_ON;
 extern struct Gpio __code WLAN_EN;
 extern struct Gpio __code WLAN_PWR_EN;
 #define HAVE_XLP_OUT 0
+// clang-format on
 
 #endif // _BOARD_GPIO_H

src/board/system76/darp7/gpio.c

@@ -4,6 +4,7 @@
 #include <common/debug.h>
 #include <common/macro.h>
 
+// clang-format off
 struct Gpio __code ACIN_N =         GPIO(B, 0);
 struct Gpio __code AC_PRESENT =     GPIO(E, 1);
 struct Gpio __code ALL_SYS_PWRGD =  GPIO(C, 0);
@@ -38,6 +39,7 @@ struct Gpio __code VA_EC_EN =       GPIO(J, 4);
 struct Gpio __code WLAN_EN =        GPIO(G, 1);
 struct Gpio __code WLAN_PWR_EN =    GPIO(A, 3);
 struct Gpio __code XLP_OUT =        GPIO(B, 4);
+// clange-format on
 
 void gpio_init() {
     // Enable LPC reset on GPD2

src/board/system76/darp7/include/board/gpio.h

@@ -8,6 +8,7 @@
 void gpio_init(void);
 void gpio_debug(void);
 
+// clang-format off
 extern struct Gpio __code ACIN_N;
 extern struct Gpio __code AC_PRESENT;
 extern struct Gpio __code ALL_SYS_PWRGD;
@@ -48,5 +49,6 @@ extern struct Gpio __code VR_ON;
 extern struct Gpio __code WLAN_EN;
 extern struct Gpio __code WLAN_PWR_EN;
 extern struct Gpio __code XLP_OUT;
+// clang-format on
 
 #endif // _BOARD_GPIO_H

src/board/system76/galp3-c/gpio.c

@@ -3,6 +3,7 @@
 #include <board/gpio.h>
 #include <common/debug.h>
 
+// clang-format off
 struct Gpio __code ACIN_N =         GPIO(B, 6);
 struct Gpio __code AC_PRESENT =     GPIO(E, 7);
 struct Gpio __code ALL_SYS_PWRGD =  GPIO(C, 0);
@@ -40,6 +41,7 @@ struct Gpio __code VA_EC_EN =       GPIO(E, 3);
 struct Gpio __code VR_ON =          GPIO(H, 4);
 struct Gpio __code WLAN_EN =        GPIO(H, 5);
 struct Gpio __code WLAN_PWR_EN =    GPIO(J, 4);
+// clang-format on
 
 void gpio_init() {
     // Enable LPC reset on GPD2

src/board/system76/galp3-c/include/board/gpio.h

@@ -8,6 +8,7 @@
 void gpio_init(void);
 void gpio_debug(void);
 
+// clang-format off
 extern struct Gpio __code ACIN_N;
 extern struct Gpio __code AC_PRESENT;
 extern struct Gpio __code ALL_SYS_PWRGD;
@@ -46,5 +47,6 @@ extern struct Gpio __code VR_ON;
 extern struct Gpio __code WLAN_EN;
 extern struct Gpio __code WLAN_PWR_EN;
 #define HAVE_XLP_OUT 0
+// clang-format on
 
 #endif // _BOARD_GPIO_H

src/board/system76/galp5/gpio.c

@@ -4,6 +4,7 @@
 #include <common/debug.h>
 #include <common/macro.h>
 
+// clang-format off
 struct Gpio __code ACIN_N =         GPIO(B, 0);
 struct Gpio __code AC_PRESENT =     GPIO(E, 1);
 struct Gpio __code ALL_SYS_PWRGD =  GPIO(C, 0);
@@ -41,6 +42,7 @@ struct Gpio __code VA_EC_EN =       GPIO(J, 4);
 struct Gpio __code WLAN_EN =        GPIO(G, 1);
 struct Gpio __code WLAN_PWR_EN =    GPIO(A, 3);
 struct Gpio __code XLP_OUT =        GPIO(B, 4);
+// clang-format on
 
 void gpio_init() {
     // Enable LPC reset on GPD2

src/board/system76/galp5/include/board/gpio.h

@@ -8,6 +8,7 @@
 void gpio_init(void);
 void gpio_debug(void);
 
+// clang-format off
 extern struct Gpio __code ACIN_N;
 extern struct Gpio __code AC_PRESENT;
 extern struct Gpio __code ALL_SYS_PWRGD;
@@ -49,5 +50,6 @@ extern struct Gpio __code VA_EC_EN;
 extern struct Gpio __code WLAN_EN;
 extern struct Gpio __code WLAN_PWR_EN;
 extern struct Gpio __code XLP_OUT;
+// clang-format on
 
 #endif // _BOARD_GPIO_H

src/board/system76/gaze15/gpio.c

@@ -3,6 +3,7 @@
 #include <board/gpio.h>
 #include <common/debug.h>
 
+// clang-format off
 struct Gpio __code ACIN_N =         GPIO(B, 0);
 struct Gpio __code AC_PRESENT =     GPIO(E, 1);
 struct Gpio __code ALL_SYS_PWRGD =  GPIO(C, 0);
@@ -35,6 +36,7 @@ struct Gpio __code VA_EC_EN =       GPIO(J, 4); // renamed to SLP_SUS#
 struct Gpio __code WLAN_EN =        GPIO(G, 1);
 struct Gpio __code WLAN_PWR_EN =    GPIO(A, 3);
 struct Gpio __code XLP_OUT =        GPIO(B, 4);
+// clang-format on
 
 void gpio_init() {
     // Enable LPC reset on GPD2

src/board/system76/gaze15/include/board/gpio.h

@@ -8,6 +8,7 @@
 void gpio_init(void);
 void gpio_debug(void);
 
+// clang-format off
 extern struct Gpio __code ACIN_N;
 extern struct Gpio __code AC_PRESENT;
 extern struct Gpio __code ALL_SYS_PWRGD;
@@ -44,5 +45,6 @@ extern struct Gpio __code VA_EC_EN;
 extern struct Gpio __code WLAN_EN;
 extern struct Gpio __code WLAN_PWR_EN;
 extern struct Gpio __code XLP_OUT;
+// clang-format on
 
 #endif // _BOARD_GPIO_H

src/board/system76/lemp10/gpio.c

@@ -4,6 +4,7 @@
 #include <common/debug.h>
 #include <common/macro.h>
 
+// clang-format off
 struct Gpio __code ACIN_N =         GPIO(B, 0);
 struct Gpio __code AC_PRESENT =     GPIO(E, 1);
 struct Gpio __code ALL_SYS_PWRGD =  GPIO(C, 0);
@@ -38,6 +39,7 @@ struct Gpio __code VR_ON =          GPIO(H, 4);
 struct Gpio __code WLAN_EN =        GPIO(G, 1);
 struct Gpio __code WLAN_PWR_EN =    GPIO(A, 3);
 struct Gpio __code XLP_OUT =        GPIO(B, 4);
+// clang-format on
 
 void gpio_init() {
     // Enable LPC reset on GPD2

src/board/system76/lemp10/include/board/gpio.h

@@ -8,6 +8,7 @@
 void gpio_init(void);
 void gpio_debug(void);
 
+// clang-format off
 extern struct Gpio __code ACIN_N;
 extern struct Gpio __code AC_PRESENT;
 extern struct Gpio __code ALL_SYS_PWRGD;
@@ -48,5 +49,6 @@ extern struct Gpio __code VR_ON;
 extern struct Gpio __code WLAN_EN;
 extern struct Gpio __code WLAN_PWR_EN;
 extern struct Gpio __code XLP_OUT;
+// clang-format on
 
 #endif // _BOARD_GPIO_H

src/board/system76/lemp9/gpio.c

@@ -3,6 +3,7 @@
 #include <board/gpio.h>
 #include <common/debug.h>
 
+// clang-format off
 struct Gpio __code ACIN_N =         GPIO(B, 0);
 struct Gpio __code AC_PRESENT =     GPIO(E, 1);
 struct Gpio __code ALL_SYS_PWRGD =  GPIO(C, 0);
@@ -38,6 +39,7 @@ struct Gpio __code VR_ON =          GPIO(H, 4);
 struct Gpio __code WLAN_EN =        GPIO(G, 1);
 struct Gpio __code WLAN_PWR_EN =    GPIO(A, 3);
 struct Gpio __code XLP_OUT =        GPIO(B, 4);
+// clang-format on
 
 void gpio_init() {
     // Enable LPC reset on GPD2

src/board/system76/lemp9/include/board/gpio.h

@@ -8,6 +8,7 @@
 void gpio_init(void);
 void gpio_debug(void);
 
+// clang-format off
 extern struct Gpio __code ACIN_N;
 extern struct Gpio __code AC_PRESENT;
 extern struct Gpio __code ALL_SYS_PWRGD;
@@ -47,5 +48,6 @@ extern struct Gpio __code VR_ON;
 extern struct Gpio __code WLAN_EN;
 extern struct Gpio __code WLAN_PWR_EN;
 extern struct Gpio __code XLP_OUT;
+// clang-format on
 
 #endif // _BOARD_GPIO_H

src/board/system76/oryp5/gpio.c

@@ -3,6 +3,7 @@
 #include <board/gpio.h>
 #include <common/debug.h>
 
+// clang-format off
 struct Gpio __code ACIN_N =         GPIO(B, 6);
 struct Gpio __code AC_PRESENT =     GPIO(E, 7);
 struct Gpio __code ALL_SYS_PWRGD =  GPIO(C, 0);
@@ -35,6 +36,7 @@ struct Gpio __code USB_PWR_EN_N =   GPIO(F, 7);
 struct Gpio __code VA_EC_EN =       GPIO(J, 0); // renamed to EC_SLP_SUS#
 struct Gpio __code WLAN_EN =        GPIO(J, 7);
 struct Gpio __code WLAN_PWR_EN =    GPIO(B, 0);
+// clang-format on
 
 void gpio_init(void) {
     // Enable LPC reset on GPD2

src/board/system76/oryp5/include/board/gpio.h

@@ -8,6 +8,7 @@
 void gpio_init(void);
 void gpio_debug(void);
 
+// clang-format off
 extern struct Gpio __code ACIN_N;
 extern struct Gpio __code AC_PRESENT;
 extern struct Gpio __code ALL_SYS_PWRGD;
@@ -46,5 +47,6 @@ extern struct Gpio __code VA_EC_EN;
 extern struct Gpio __code WLAN_EN;
 extern struct Gpio __code WLAN_PWR_EN;
 #define HAVE_XLP_OUT 0
+// clang-format on
 
 #endif // _BOARD_GPIO_H

src/board/system76/oryp6/gpio.c

@@ -4,6 +4,7 @@
 #include <common/debug.h>
 #include <common/macro.h>
 
+// clang-format off
 struct Gpio __code ACIN_N =         GPIO(B, 0);
 struct Gpio __code AC_PRESENT =     GPIO(E, 1);
 struct Gpio __code ALL_SYS_PWRGD =  GPIO(C, 0);
@@ -36,6 +37,7 @@ struct Gpio __code VA_EC_EN =       GPIO(J, 4); // renamed to EC_SLP_SUS#
 struct Gpio __code WLAN_EN =        GPIO(G, 1);
 struct Gpio __code WLAN_PWR_EN =    GPIO(A, 3);
 struct Gpio __code XLP_OUT =        GPIO(B, 4);
+// clang-format on
 
 void gpio_init() {
     // Enable LPC reset on GPD2

src/board/system76/oryp6/include/board/gpio.h

@@ -8,6 +8,7 @@
 void gpio_init(void);
 void gpio_debug(void);
 
+// clang-format off
 extern struct Gpio __code ACIN_N;
 extern struct Gpio __code AC_PRESENT;
 extern struct Gpio __code ALL_SYS_PWRGD;
@@ -46,5 +47,6 @@ extern struct Gpio __code VA_EC_EN;
 extern struct Gpio __code WLAN_EN;
 extern struct Gpio __code WLAN_PWR_EN;
 extern struct Gpio __code XLP_OUT;
+// clang-format on
 
 #endif // _BOARD_GPIO_H

src/board/system76/oryp7/gpio.c

@@ -4,6 +4,7 @@
 #include <common/debug.h>
 #include <common/macro.h>
 
+// clang-format off
 struct Gpio __code ACIN_N =         GPIO(B, 0);
 struct Gpio __code AC_PRESENT =     GPIO(E, 1);
 struct Gpio __code ALL_SYS_PWRGD =  GPIO(C, 0);
@@ -35,6 +36,7 @@ struct Gpio __code VA_EC_EN =       GPIO(J, 4); // renamed to EC_SLP_SUS#
 struct Gpio __code WLAN_EN =        GPIO(G, 1);
 struct Gpio __code WLAN_PWR_EN =    GPIO(H, 4);
 struct Gpio __code XLP_OUT =        GPIO(B, 4);
+// clang-format on
 
 void gpio_init() {
     // Enable LPC reset on GPD2

src/board/system76/oryp7/include/board/gpio.h

@@ -8,6 +8,7 @@
 void gpio_init(void);
 void gpio_debug(void);
 
+// clang-format off
 extern struct Gpio __code ACIN_N;
 extern struct Gpio __code AC_PRESENT;
 extern struct Gpio __code ALL_SYS_PWRGD;
@@ -45,5 +46,6 @@ extern struct Gpio __code VA_EC_EN;
 extern struct Gpio __code WLAN_EN;
 extern struct Gpio __code WLAN_PWR_EN;
 extern struct Gpio __code XLP_OUT;
+// clang-format on
 
 #endif // _BOARD_GPIO_H

src/common/keymap.c

@@ -9,6 +9,7 @@
 #endif
 
 // https://www.win.tue.nl/~aeb/linux/kbd/scancodes-10.html#ss10.3
+// clang-format off
 static uint8_t __code lookup[256] = {
 0xff, 0x43, 0x41, 0x3f, 0x3d, 0x3b, 0x3c, 0x58, 0x64, 0x44, 0x42, 0x40, 0x3e, 0x0f, 0x29, 0x59,
 0x65, 0x38, 0x2a, 0x70, 0x1d, 0x10, 0x02, 0x5a, 0x66, 0x71, 0x2c, 0x1f, 0x1e, 0x11, 0x03, 0x5b,
@@ -27,6 +28,7 @@ static uint8_t __code lookup[256] = {
 0xe0, 0xe1, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, 0xea, 0xeb, 0xec, 0xed, 0xee, 0xef,
 0xf0, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, 0xf9, 0xfa, 0xfb, 0xfc, 0xfd, 0xfe, 0xff,
 };
+// clang-format on
 
 uint16_t keymap_translate(uint16_t key) {
     return (key & 0xFF00) | lookup[(key & 0xFF)];

src/common/version.c

@@ -7,6 +7,7 @@
     #define __code
 #endif
 
+// clang-format off
 static const char __code BOARD[] =
     "76EC_BOARD="
     xstr(__BOARD__);
@@ -14,6 +15,7 @@ static const char __code BOARD[] =
 static const char __code VERSION[] =
     "76EC_VERSION="
     xstr(__FIRMWARE_VERSION__);
+// clang-format on
 
 const char * board() {
     return &BOARD[11];

src/ec/ite/include/ec/espi.h

@@ -17,10 +17,12 @@ struct VirtualWire {
     uint8_t shift;
 };
 
+// clang-format off
 #define VIRTUAL_WIRE(INDEX, SHIFT) { \
     .index = &VWIDX ## INDEX, \
     .shift = SHIFT, \
 }
+// clang-format on
 
 enum VirtualWireState {
     VWS_INVALID = 0x00,

src/ec/ite/include/ec/gpio.h

@@ -21,12 +21,14 @@ struct Gpio {
     uint8_t value;
 };
 
+// clang-format off
 #define GPIO(BLOCK, NUMBER) { \
     .data = &GPDR ## BLOCK, \
     .mirror = &GPDMR ## BLOCK, \
     .control = &GPCR ## BLOCK ## NUMBER, \
     .value = BIT(NUMBER), \
 }
+// clang-format on
 
 bool gpio_get(struct Gpio * gpio);
 void gpio_set(struct Gpio * gpio, bool value);

src/ec/ite/pmc.c

@@ -2,12 +2,14 @@
 
 #include <ec/pmc.h>
 
+// clang-format off
 #define PMC(NUM) { \
     .status = &PM ## NUM ## STS, \
     .data_out = &PM ## NUM ## DO, \
     .data_in = &PM ## NUM ## DI, \
     .control = &PM ## NUM ## CTL, \
 }
+// clang-format on
 
 struct Pmc __code PMC_1 = PMC(1);
 struct Pmc __code PMC_2 = PMC(2);

src/ec/ite/ps2.c

@@ -2,12 +2,14 @@
 
 #include <ec/ps2.h>
 
+// clang-format off
 #define PS2(NUM) { \
     .control = &PSCTL ## NUM, \
     .interrupt = &PSINT ## NUM, \
     .status = &PSSTS ## NUM, \
     .data = &PSDAT ## NUM, \
 }
+// clang-format on
 
 struct Ps2 __code PS2_1 = PS2(1);
 struct Ps2 __code PS2_2 = PS2(2);

src/ec/ite/signature.c

@@ -2,6 +2,7 @@
 
 #include <ec/espi.h>
 
+// clang-format off
 #if EC_ESPI
 // eSPI signature (byte 7 = 0xA4)
 static __code const uint8_t __at(0x40) SIGNATURE[16] = {
@@ -15,3 +16,4 @@ static __code const uint8_t __at(0x40) SIGNATURE[16] = {
     0x85, 0x12, 0x5A, 0x5A, 0xAA, 0x00, 0x55, 0x55,
 };
 #endif // EC_ESPI
+// clang-format on

src/keyboard/system76/14in_83/include/board/keymap.h

@@ -13,6 +13,7 @@
 // common/keymap.h requires KM_LAY, KM_OUT, and KM_IN definitions
 #include <common/keymap.h>
 
+// clang-format off
 // Conversion of physical ANSI layout to keyboard matrix
 #define LAYOUT( \
     K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \
@@ -68,6 +69,7 @@
     { ___, ___, K60, K1D, K57, K0F, ___, K0G }, \
     { ___, ___, K2D, ___, K61, K0C, ___, K59 } \
 }
+// clang-format on
 
 // Position of physical Esc key in the matrix
 #define MATRIX_ESC_INPUT    7

src/keyboard/system76/14in_83/keymap/clevo_l141cu_us_iso.c

@@ -5,6 +5,7 @@
 
 #include <board/keymap.h>
 
+// clang-format off
 uint16_t __code KEYMAP[KM_LAY][KM_OUT][KM_IN] = {
 // TODO: K0E=K_PAUSE (once defined in src/common/include/common/keymap.h)
 LAYOUT_ISO(
@@ -27,3 +28,4 @@ LAYOUT_ISO(
     K_LEFT, K_DOWN, K_RIGHT
 )
 };
+// clang-format on

src/keyboard/system76/14in_83/keymap/default.c

@@ -4,6 +4,7 @@
 
 #include <board/keymap.h>
 
+// clang-format off
 uint16_t __code KEYMAP[KM_LAY][KM_OUT][KM_IN] = {
 LAYOUT(
     K_ESC, K_F1, K_F2, K_F3, K_F4, K_F5, K_F6, K_F7, K_F8, K_F9, K_F10, K_F11, K_F12, K_HOME, K_END, K_PRINT_SCREEN, K_DEL,
@@ -24,3 +25,4 @@ LAYOUT(
     K_LEFT, K_DOWN, K_RIGHT
 )
 };
+// clang-format on

src/keyboard/system76/14in_83/keymap/fabian.c

@@ -8,6 +8,7 @@
 
 #include <board/keymap.h>
 
+// clang-format off
 uint16_t __code KEYMAP[KM_LAY][KM_OUT][KM_IN] = {
 // TODO: K0E=K_PAUSE (once defined in src/common/include/common/keymap.h)
 LAYOUT_ISO(
@@ -30,3 +31,4 @@ LAYOUT_ISO(
     K_LEFT, K_DOWN, K_RIGHT
 )
 };
+// clang-format on

src/keyboard/system76/14in_83/keymap/ins-prtsc.c

@@ -5,6 +5,7 @@
 
 #include <board/keymap.h>
 
+// clang-format off
 uint16_t __code KEYMAP[KM_LAY][KM_OUT][KM_IN] = {
 LAYOUT(
     K_ESC, K_F1, K_F2, K_F3, K_F4, K_F5, K_F6, K_F7, K_F8, K_F9, K_F10, K_F11, K_F12, K_HOME, K_END, K_INSERT, K_DEL,
@@ -25,3 +26,4 @@ LAYOUT(
     K_LEFT, K_DOWN, K_RIGHT
 )
 };
+// clang-format on

src/keyboard/system76/14in_83/keymap/jeremy.c

@@ -4,6 +4,7 @@
 
 #include <board/keymap.h>
 
+// clang-format off
 uint16_t __code KEYMAP[KM_LAY][KM_OUT][KM_IN] = {
 LAYOUT(
     K_ESC, K_F1, K_F2, K_F3, K_F4, K_F5, K_F6, K_F7, K_F8, K_F9, K_F10, K_F11, K_F12, K_HOME, K_END, K_PRINT_SCREEN, K_DEL,
@@ -24,3 +25,4 @@ LAYOUT(
     K_LEFT, K_DOWN, K_RIGHT
 )
 };
+// clang-format on

src/keyboard/system76/14in_83/keymap/levi.c

@@ -4,6 +4,7 @@
 
 #include <board/keymap.h>
 
+// clang-format off
 uint16_t __code KEYMAP[KM_LAY][KM_OUT][KM_IN] = {
 LAYOUT(
     K_ESC, K_F1, K_F2, K_F3, K_F4, K_F5, K_F6, K_F7, K_F8, K_F9, K_F10, K_F11, K_F12, K_HOME, K_END, K_PRINT_SCREEN, K_DEL,
@@ -24,3 +25,4 @@ LAYOUT(
     K_LEFT, K_DOWN, K_RIGHT
 )
 };
+// clang-format on

src/keyboard/system76/14in_83/keymap/valentin_french_iso.c

@@ -7,6 +7,7 @@
 
 #include <board/keymap.h>
 
+// clang-format off
 uint16_t __code KEYMAP[KM_LAY][KM_OUT][KM_IN] = {
 // TODO: K0E=K_PAUSE (once defined in src/common/include/common/keymap.h)
 LAYOUT_ISO(
@@ -29,3 +30,4 @@ LAYOUT_ISO(
     K_LEFT, K_DOWN, K_RIGHT
 )
 };
+// clang-format on

src/keyboard/system76/14in_86/include/board/keymap.h

@@ -13,6 +13,7 @@
 // common/keymap.h requires KM_LAY, KM_OUT, and KM_IN definitions
 #include <common/keymap.h>
 
+// clang-format off
 // Conversion of physical layout to keyboard matrix
 #define LAYOUT( \
     K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \
@@ -39,6 +40,7 @@
     { ___, K2D, K58, K1D, K2E, K0F, K1E, K0G }, \
     { K56, ___, K3C, ___, K59, K0C, K4D, K3D } \
 }
+// clang-format on
 
 // Position of physical Esc key in the matrix
 #define MATRIX_ESC_INPUT    7

src/keyboard/system76/14in_86/keymap/carl.c

@@ -4,6 +4,7 @@
 
 #include <board/keymap.h>
 
+// clang-format off
 uint16_t __code KEYMAP[KM_LAY][KM_OUT][KM_IN] = {
 LAYOUT(
     K_ESC, K_F1, K_F2, K_F3, K_F4, K_F5, K_F6, K_F7, K_F8, K_F9, K_F10, K_F11, K_F12, K_PRINT_SCREEN, 0 /* pause */, K_INSERT, K_DEL,
@@ -22,3 +23,4 @@ LAYOUT(
     K_LEFT_CTRL, KT_FN, K_LEFT_ALT, K_LEFT_SUPER, K_SPACE, K_RIGHT_CTRL, K_APP, K_RIGHT_ALT, K_LEFT, K_DOWN, K_RIGHT
 )
 };
+// clang-format on

src/keyboard/system76/14in_86/keymap/default.c

@@ -4,6 +4,7 @@
 
 #include <board/keymap.h>
 
+// clang-format off
 uint16_t __code KEYMAP[KM_LAY][KM_OUT][KM_IN] = {
 LAYOUT(
     K_ESC, K_F1, K_F2, K_F3, K_F4, K_F5, K_F6, K_F7, K_F8, K_F9, K_F10, K_F11, K_F12, K_PRINT_SCREEN, 0 /* pause */, K_INSERT, K_DEL,
@@ -22,3 +23,4 @@ LAYOUT(
     K_LEFT_CTRL, KT_FN, K_LEFT_SUPER, K_LEFT_ALT, K_SPACE, K_RIGHT_ALT, K_APP, K_RIGHT_CTRL, K_LEFT, K_DOWN, K_RIGHT
 )
 };
+// clang-format on

src/keyboard/system76/14in_86/keymap/jeremy.c

@@ -4,6 +4,7 @@
 
 #include <board/keymap.h>
 
+// clang-format off
 uint16_t __code KEYMAP[KM_LAY][KM_OUT][KM_IN] = {
 LAYOUT(
     K_ESC, K_F1, K_F2, K_F3, K_F4, K_F5, K_F6, K_F7, K_F8, K_F9, K_F10, K_F11, K_F12, K_PRINT_SCREEN, 0 /* pause */, K_INSERT, K_DEL,
@@ -22,3 +23,4 @@ LAYOUT(
     K_LEFT_CTRL, KT_FN, K_LEFT_ALT, K_LEFT_SUPER, K_ESC, KT_FN, K_RIGHT_ALT, K_RIGHT_CTRL, K_LEFT, K_DOWN, K_RIGHT
 )
 };
+// clang-format on

src/keyboard/system76/15in_102/include/board/keymap.h

@@ -21,6 +21,7 @@
     #define KI2 K_INT_2
 #endif
 
+// clang-format off
 // Conversion of physical layout to keyboard matrix
 #define LAYOUT( \
     K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I, K0J, \
@@ -49,6 +50,7 @@
     { K0H, K0G, K43, K4C, K59, K10, K0B, K0C }, \
     { K35, K1C, K4F, K51, K4D, K58, K5A, ___ } \
 }
+// clang-format on
 
 // Position of physical Esc key in the matrix
 #define MATRIX_ESC_INPUT    7

src/keyboard/system76/15in_102/keymap/default.c

@@ -4,6 +4,7 @@
 
 #include <board/keymap.h>
 
+// clang-format off
 uint16_t __code KEYMAP[KM_LAY][KM_OUT][KM_IN] = {
 LAYOUT(
     K_ESC, K_F1, K_F2, K_F3, K_F4, K_F5, K_F6, K_F7, K_F8, K_F9, K_F10, K_F11, K_F12, K_PRINT_SCREEN, K_INSERT, K_DEL, K_HOME, K_END, K_PGUP, K_PGDN,
@@ -22,3 +23,4 @@ LAYOUT(
     K_LEFT_CTRL, KT_FN, K_LEFT_SUPER, K_LEFT_ALT, K_SPACE, K_RIGHT_ALT, K_APP, K_RIGHT_CTRL, K_LEFT, K_DOWN, K_RIGHT, K_NUM_0, K_NUM_PERIOD
 )
 };
+// clang-format on

src/keyboard/system76/15in_102/keymap/jeremy.c

@@ -4,6 +4,7 @@
 
 #include <board/keymap.h>
 
+// clang-format off
 uint16_t __code KEYMAP[KM_LAY][KM_OUT][KM_IN] = {
 LAYOUT(
     K_ESC, K_F1, K_F2, K_F3, K_F4, K_F5, K_F6, K_F7, K_F8, K_F9, K_F10, K_F11, K_F12, K_PRINT_SCREEN, K_INSERT, K_DEL, K_HOME, K_END, K_PGUP, K_PGDN,
@@ -22,3 +23,4 @@ LAYOUT(
     K_LEFT_CTRL, KT_FN, K_LEFT_ALT, K_LEFT_SUPER, K_ESC, KT_FN, K_RIGHT_ALT, K_RIGHT_CTRL, K_LEFT, K_DOWN, K_RIGHT, K_NUM_0, K_NUM_PERIOD
 )
 };
+// clang-format on

src/keyboard/system76/15in_102_nkey/include/board/keymap.h

@@ -15,6 +15,7 @@
 // common/keymap.h requires KM_LAY, KM_OUT, and KM_IN definitions
 #include <common/keymap.h>
 
+// clang-format off
 // Conversion of physical layout to keyboard matrix
 #define LAYOUT( \
     K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I, K0J, \
@@ -43,6 +44,7 @@
     { ___, ___, ___, ___, ___, ___, ___, ___ }, /* 16 */ \
     { ___, ___, ___, ___, ___, ___, ___, ___ }  /* 17 */ \
 }
+// clang-format on
 
 // Position of physical Esc key in the matrix
 #define MATRIX_ESC_INPUT    0

src/keyboard/system76/15in_102_nkey/keymap/default.c

@@ -4,6 +4,7 @@
 
 #include <board/keymap.h>
 
+// clang-format off
 uint16_t __code KEYMAP[KM_LAY][KM_OUT][KM_IN] = {
 LAYOUT(
     K_ESC, K_F1, K_F2, K_F3, K_F4, K_F5, K_F6, K_F7, K_F8, K_F9, K_F10, K_F11, K_F12, K_PRINT_SCREEN, K_INSERT, K_DEL, K_HOME, K_END, K_PGUP, K_PGDN,
@@ -22,3 +23,4 @@ LAYOUT(
     K_LEFT_CTRL, KT_FN, K_LEFT_SUPER, K_LEFT_ALT, K_SPACE, K_RIGHT_ALT, K_APP, K_RIGHT_CTRL, K_LEFT, K_DOWN, K_RIGHT, K_NUM_0, K_NUM_PERIOD
 )
 };
+// clang-format on

src/keyboard/system76/15in_102_nkey/keymap/jeremy.c

@@ -4,6 +4,7 @@
 
 #include <board/keymap.h>
 
+// clang-format off
 uint16_t __code KEYMAP[KM_LAY][KM_OUT][KM_IN] = {
 LAYOUT(
     K_ESC, K_F1, K_F2, K_F3, K_F4, K_F5, K_F6, K_F7, K_F8, K_F9, K_F10, K_F11, K_F12, K_PRINT_SCREEN, K_INSERT, K_DEL, K_HOME, K_END, K_PGUP, K_PGDN,
@@ -22,3 +23,4 @@ LAYOUT(
     K_LEFT_CTRL, KT_FN, K_LEFT_ALT, K_LEFT_SUPER, K_ESC, KT_FN, K_RIGHT_ALT, K_RIGHT_CTRL, K_LEFT, K_DOWN, K_RIGHT, K_NUM_0, K_NUM_PERIOD
 )
 };
+// clang-format on