sravan/system76-embedded-controller
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

addw1

Browse Source
This commit is contained in:
Jeremy Soller 2020-09-18 14:44:33 -06:00 committed by Jeremy Soller
parent 8fc0113465
commit dc81c724ec
9 changed files with 630 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

84
src/board/system76/addw1/board.c Normal file
View File

@ -0,0 +1,84 @@
// SPDX-License-Identifier: GPL-3.0-only
#include <arch/time.h>
#include <board/battery.h>
#include <board/board.h>
#include <board/dgpu.h>
#include <board/gctrl.h>
#include <board/gpio.h>
#include <board/kbc.h>
#include <board/peci.h>
#include <board/power.h>
#include <common/debug.h>
extern uint8_t main_cycle;
void board_init(void) {
// Allow CPU to boot
gpio_set(&SB_KBCRST_N, true);
// Allow backlight to be turned on
gpio_set(&BKL_EN, true);
// Enable camera
gpio_set(&CCD_EN, true);
// Enable wireless
gpio_set(&BT_EN, true);
gpio_set(&WLAN_EN, true);
gpio_set(&WLAN_PWR_EN, true);
// Enable right USB port
gpio_set(&USB_PWR_EN_N, false);
// Assert SMI#, SCI#, and SWI#
gpio_set(&SCI_N, true);
gpio_set(&SMI_N, true);
gpio_set(&SWI_N, true);
}
// Set PL4 using PECI
static int set_power_limit(uint8_t watts) {
return peci_wr_pkg_config(
60, // index
0, // param
((uint32_t)watts) * 8
);
}
void board_on_ac(bool ac) {
uint8_t power_limit = ac ? POWER_LIMIT_AC : POWER_LIMIT_DC;
// Retry, timeout errors happen occasionally
for (int i = 0; i < 16; i++) {
int res = set_power_limit(power_limit);
DEBUG("set_power_limit %d = %d\n", power_limit, res);
if (res == 0x40) {
break;
} else if (res < 0) {
ERROR("set_power_limit failed: 0x%02X\n", -res);
} else {
ERROR("set_power_limit unknown response: 0x%02X\n", res);
}
}
}
void board_event(void) {
bool ac = !gpio_get(&ACIN_N);
static bool last_power_limit_ac = true;
// We don't use power_state because the latency needs to be low
if (gpio_get(&BUF_PLT_RST_N)) {
if (last_power_limit_ac != ac) {
board_on_ac(ac);
last_power_limit_ac = ac;
}
} else {
last_power_limit_ac = true;
}
if (main_cycle == 0) {
// Set keyboard LEDs
static uint8_t last_kbc_leds = 0;
if (kbc_leds != last_kbc_leds) {
gpio_set(&LED_SCROLL_N, (kbc_leds & 1) == 0);
gpio_set(&LED_NUM_N, (kbc_leds & 2) == 0);
gpio_set(&LED_CAP_N, (kbc_leds & 4) == 0);
last_kbc_leds = kbc_leds;
}
}
}

58
src/board/system76/addw1/board.mk Normal file
View File

@ -0,0 +1,58 @@
# SPDX-License-Identifier: GPL-3.0-only
EC=it8587e
# Add keymap to src
KEYMAP?=default
SRC+=$(BOARD_DIR)/keymap/$(KEYMAP).c
# Set discrete GPU I2C bus
CFLAGS+=-DI2C_DGPU=I2C_1
# Set battery I2C bus
CFLAGS+=-DI2C_SMBUS=I2C_0
# Set touchpad PS2 bus
CFLAGS+=-DPS2_TOUCHPAD=PS2_3
# Set smart charger parameters
CFLAGS+=\
-DCHARGER_CHARGE_CURRENT=1536 \
-DCHARGER_CHARGE_VOLTAGE=12600 \
-DCHARGER_INPUT_CURRENT=11800
# Set battery charging thresholds
CFLAGS+=\
-DBATTERY_START_THRESHOLD=0 \
-DBATTERY_END_THRESHOLD=100
# Set CPU power limits in watts
CFLAGS+=\
-DPOWER_LIMIT_AC=180 \
-DPOWER_LIMIT_DC=28
# Custom fan curve
CFLAGS+=-DBOARD_HEATUP=5
CFLAGS+=-DBOARD_COOLDOWN=20
CFLAGS+=-DBOARD_FAN_POINTS="\
FAN_POINT(60, 40), \
FAN_POINT(65, 60), \
FAN_POINT(70, 75), \
FAN_POINT(75, 90), \
FAN_POINT(80, 100) \
"
# Enable DGPU support
CFLAGS+=-DHAVE_DGPU=1
CFLAGS+=-DBOARD_DGPU_HEATUP=5
CFLAGS+=-DBOARD_DGPU_COOLDOWN=20
CFLAGS+=-DBOARD_DGPU_FAN_POINTS="\
FAN_POINT(60, 40), \
FAN_POINT(65, 60), \
FAN_POINT(70, 75), \
FAN_POINT(75, 90), \
FAN_POINT(80, 100) \
"
# Add system76 common code
include src/board/system76/common/common.mk

276
src/board/system76/addw1/gpio.c Normal file
View File

@ -0,0 +1,276 @@
// SPDX-License-Identifier: GPL-3.0-only
#include <board/gpio.h>
#include <common/debug.h>
struct Gpio __code ACIN_N = GPIO(B, 6);
struct Gpio __code AC_PRESENT = GPIO(E, 7);
struct Gpio __code ALL_SYS_PWRGD = GPIO(C, 0);
struct Gpio __code BKL_EN = GPIO(H, 2);
struct Gpio __code BT_EN = GPIO(F, 3);
struct Gpio __code BUF_PLT_RST_N = GPIO(D, 2);
struct Gpio __code CCD_EN = GPIO(G, 0);
struct Gpio __code DD_ON = GPIO(E, 4);
struct Gpio __code DGPU_PWR_EN = GPIO(E, 3);
struct Gpio __code EC_EN = GPIO(B, 5); // renamed to SUSBC_EN
struct Gpio __code EC_RSMRST_N = GPIO(E, 5);
struct Gpio __code GC6_FB_EN = GPIO(G, 1);
struct Gpio __code LAN_WAKEUP_N = GPIO(B, 2);
struct Gpio __code LED_ACIN = GPIO(C, 7);
struct Gpio __code LED_AIRPLANE_N = GPIO(G, 6);
struct Gpio __code LED_CAP_N = GPIO(J, 5);
struct Gpio __code LED_BAT_CHG = GPIO(H, 3);
struct Gpio __code LED_BAT_FULL = GPIO(H, 4);
struct Gpio __code LED_NUM_N = GPIO(J, 4);
struct Gpio __code LED_PWR = GPIO(H, 5);
struct Gpio __code LED_SCROLL_N = GPIO(J, 3);
struct Gpio __code LID_SW_N = GPIO(D, 1);
struct Gpio __code PM_CLKRUN_N = GPIO(H, 0); // renamed to ECCLKRUN#
struct Gpio __code PM_PWROK = GPIO(C, 6);
struct Gpio __code PWR_BTN_N = GPIO(D, 5);
struct Gpio __code PWR_SW_N = GPIO(D, 0);
struct Gpio __code SB_KBCRST_N = GPIO(E, 6);
struct Gpio __code SCI_N = GPIO(D, 4);
struct Gpio __code SMI_N = GPIO(D, 3);
struct Gpio __code SUSB_N_PCH = GPIO(H, 6);
struct Gpio __code SUSC_N_PCH = GPIO(H, 1);
struct Gpio __code SWI_N = GPIO(E, 0);
struct Gpio __code USB_PWR_EN_N = GPIO(F, 7);
struct Gpio __code VA_EC_EN = GPIO(J, 0); // renamed to SLP_SUS_EC#
struct Gpio __code WLAN_EN = GPIO(J, 2);
struct Gpio __code WLAN_PWR_EN = GPIO(B, 0);
void gpio_init() {
// Enable LPC reset on GPD2
GCR = 0x04;
// Set GPIO data
// SYS_FAN
GPDRA = (1 << 3);
GPDRB = 0x00;
GPDRC = 0x00;
// PWR_BTN#, SCI#, SMI#
GPDRD = (1 << 5) | (1 << 4) | (1 << 3);
GPDRE = 0x00;
// H_PECI
GPDRF = (1 << 6);
// AIRPLAN_LED#
GPDRG = (1 << 6);
GPDRH = 0x00;
GPDRI = 0x00;
// LED_CAP#, LED_NUM#, LED_SCROLL#
GPDRJ = (1 << 5) | (1 << 4) | (1 << 3);
// Set GPIO control
// EC_PWM_LEDKB_P
GPCRA0 = GPIO_ALT;
// KBC_BEEP
GPCRA1 = GPIO_ALT;
// CPU_FAN
GPCRA2 = GPIO_ALT;
// SYS_FAN TODO
GPCRA3 = GPIO_OUT | GPIO_UP;
// VGA_FAN
GPCRA4 = GPIO_ALT;
// EC_PWM_LEDKB_R
GPCRA5 = GPIO_ALT;
// EC_PWM_LEDKB_G
GPCRA6 = GPIO_ALT;
// EC_PWM_LEDKB_B
GPCRA7 = GPIO_ALT;
// WLAN_PWR_EN
GPCRB0 = GPIO_OUT | GPIO_UP;
// H_PROCHOT_EC
GPCRB1 = GPIO_OUT | GPIO_UP;
// LAN_WAKEUP#
GPCRB2 = GPIO_IN | GPIO_UP;
// SMC_BAT
GPCRB3 = GPIO_ALT;
// SMD_BAT
GPCRB4 = GPIO_ALT;
// SUSBC_EN#
GPCRB5 = GPIO_OUT | GPIO_UP;
// AC_IN#
GPCRB6 = GPIO_IN | GPIO_UP;
// PERKB-DET#
GPCRB7 = GPIO_IN | GPIO_UP;
// ALL_SYS_PWRGD
GPCRC0 = GPIO_IN;
// SMC_VGA_THERM
GPCRC1 = GPIO_OUT;
// SMD_VGA_THERM
GPCRC2 = GPIO_OUT;
// KB-SO16
GPCRC3 = GPIO_IN | GPIO_UP;
// CNVI_DET#_EC
GPCRC4 = GPIO_IN | GPIO_UP;
// KB-SO17
GPCRC5 = GPIO_IN | GPIO_UP;
// PM_PWROK
GPCRC6 = GPIO_OUT;
// LED_ACIN
GPCRC7 = GPIO_OUT | GPIO_UP;
// PWR_SW#
GPCRD0 = GPIO_IN | GPIO_UP;
// LID_SW#
GPCRD1 = GPIO_IN | GPIO_UP;
// BUF_PLT_RST#
GPCRD2 = GPIO_ALT;
// SMI#
GPCRD3 = GPIO_IN;
// SCI#
GPCRD4 = GPIO_IN;
// PWR_BTN#
GPCRD5 = GPIO_OUT | GPIO_UP;
// CPU_FANSEN
GPCRD6 = GPIO_ALT;
// ALL_FANSEN
GPCRD7 = GPIO_ALT;
// SWI#
GPCRE0 = GPIO_OUT | GPIO_UP;
// OVERT#
GPCRE1 = GPIO_IN;
// RGBKB-DET#
GPCRE2 = GPIO_IN | GPIO_UP;
// DGPU_PWR_EN
GPCRE3 = GPIO_IN;
// DD_ON
GPCRE4 = GPIO_OUT | GPIO_DOWN;
// EC_RSMRST#
GPCRE5 = GPIO_OUT;
// SB_KBCRST#
GPCRE6 = GPIO_OUT | GPIO_UP;
// AC_PRESENT
GPCRE7 = GPIO_OUT | GPIO_UP;
// 80CLK
GPCRF0 = GPIO_IN;
// USB_CHARGE_EN
GPCRF1 = GPIO_OUT | GPIO_UP;
// 3IN1
GPCRF2 = GPIO_IN | GPIO_UP;
// BT_EN
GPCRF3 = GPIO_OUT | GPIO_UP;
// TP_CLK
GPCRF4 = GPIO_ALT;
// TP_DATA
GPCRF5 = GPIO_ALT;
// H_PECI
GPCRF6 = GPIO_ALT;
// USB_PWR_EN#
GPCRF7 = GPIO_OUT | GPIO_UP;
// CCD_EN
GPCRG0 = GPIO_OUT | GPIO_UP;
// GC6_FB_EN_PCH
GPCRG1 = GPIO_IN;
// AUTO_LOAD
GPCRG2 = GPIO_OUT;
// ALSPI_CE#
GPCRG3 = GPIO_ALT;
// ALSPI_MSI
GPCRG4 = GPIO_ALT;
// ALSPI_MSO
GPCRG5 = GPIO_ALT;
// AIRPLAN_LED#
GPCRG6 = GPIO_OUT | GPIO_UP;
// ALSPI_SCLK
GPCRG7 = GPIO_ALT;
// ECCLKRUN#
GPCRH0 = GPIO_IN;
// SUSC#_PCH
GPCRH1 = GPIO_IN;
// BKL_EN
GPCRH2 = GPIO_OUT | GPIO_UP;
// LED_BAT_CHG
GPCRH3 = GPIO_OUT | GPIO_UP;
// LED_BAT_FULL
GPCRH4 = GPIO_OUT | GPIO_UP;
// LED_PWR
GPCRH5 = GPIO_OUT | GPIO_UP;
// SUSB#_PCH
GPCRH6 = GPIO_IN;
// TODO
GPCRH7 = GPIO_IN;
// BAT_DET
GPCRI0 = GPIO_ALT;
// BAT_VOLT
GPCRI1 = GPIO_ALT;
// ME_WE
GPCRI2 = GPIO_OUT;
// THERM_VOLT
GPCRI3 = GPIO_ALT;
// TOTAL_CUR
GPCRI4 = GPIO_ALT;
// MPS_ID
GPCRI5 = GPIO_IN;
// FANSEN_SEL (L:VGA H:SYS)
GPCRI6 = GPIO_OUT;
// MODEL_ID
GPCRI7 = GPIO_IN;
// SLP_SUS_EC#
GPCRJ0 = GPIO_OUT;
// KBC_MUTE#
GPCRJ1 = GPIO_IN;
// WLAN_EN
GPCRJ2 = GPIO_OUT | GPIO_UP;
// LED_SCROLL#
GPCRJ3 = GPIO_OUT | GPIO_UP;
// LED_NUM#
GPCRJ4 = GPIO_OUT | GPIO_UP;
// LED_CAP#
GPCRJ5 = GPIO_OUT | GPIO_UP;
// POWER_IC_EN
GPCRJ6 = GPIO_OUT | GPIO_UP;
// VBATT_BOOST#
GPCRJ7 = GPIO_OUT;
// LPC_AD0
GPCRM0 = GPIO_ALT;
// LPC_AD1
GPCRM1 = GPIO_ALT;
// LPC_AD2
GPCRM2 = GPIO_ALT;
// LPC_AD3
GPCRM3 = GPIO_ALT;
// PCLK_KBC
GPCRM4 = GPIO_ALT;
// LPC_FRAME#
GPCRM5 = GPIO_ALT;
// SERIRQ
GPCRM6 = GPIO_ALT;
}
#if GPIO_DEBUG
void gpio_debug_bank(
char * bank,
uint8_t data,
uint8_t mirror,
uint8_t pot,
volatile uint8_t * control
) {
for(char i = 0; i < 8; i++) {
DEBUG(
"%s%d:\n\tdata %d\n\tmirror %d\n\tpot %d\n\tcontrol %02X\n",
bank,
i,
(data >> i) & 1,
(mirror >> i) & 1,
(pot >> i) & 1,
*(control + i)
);
}
}
void gpio_debug(void) {
#define bank(BANK) gpio_debug_bank(#BANK, GPDR ## BANK, GPDMR ## BANK, GPOT ## BANK, &GPCR ## BANK ## 0)
bank(A);
bank(B);
bank(C);
bank(D);
bank(E);
bank(F);
bank(G);
bank(H);
bank(I);
bank(J);
#undef bank
}
#endif

61
src/board/system76/addw1/include/board/gpio.h Normal file
View File

@ -0,0 +1,61 @@
// SPDX-License-Identifier: GPL-3.0-only
#ifndef _BOARD_GPIO_H
#define _BOARD_GPIO_H
#include <ec/gpio.h>
#define GPIO_ALT 0x00
#define GPIO_IN 0x80
#define GPIO_OUT 0x40
#define GPIO_UP 0x04
#define GPIO_DOWN 0x02
void gpio_init(void);
void gpio_debug(void);
extern struct Gpio __code ACIN_N;
extern struct Gpio __code AC_PRESENT;
extern struct Gpio __code ALL_SYS_PWRGD;
extern struct Gpio __code BKL_EN;
extern struct Gpio __code BT_EN;
extern struct Gpio __code BUF_PLT_RST_N;
extern struct Gpio __code CCD_EN;
extern struct Gpio __code DD_ON;
extern struct Gpio __code DGPU_PWR_EN;
extern struct Gpio __code EC_EN;
extern struct Gpio __code EC_RSMRST_N;
extern struct Gpio __code GC6_FB_EN;
extern struct Gpio __code LAN_WAKEUP_N;
extern struct Gpio __code LED_ACIN;
extern struct Gpio __code LED_AIRPLANE_N;
extern struct Gpio __code LED_CAP_N;
extern struct Gpio __code LED_BAT_CHG;
extern struct Gpio __code LED_BAT_FULL;
extern struct Gpio __code LED_NUM_N;
extern struct Gpio __code LED_PWR;
extern struct Gpio __code LED_SCROLL_N;
extern struct Gpio __code LID_SW_N;
#define HAVE_PCH_DPWROK_EC 0
#define HAVE_PCH_PWROK_EC 0
extern struct Gpio __code PM_CLKRUN_N;
extern struct Gpio __code PM_PWROK;
extern struct Gpio __code PWR_BTN_N;
extern struct Gpio __code PWR_SW_N;
extern struct Gpio __code SB_KBCRST_N;
extern struct Gpio __code SCI_N;
#define HAVE_SLP_SUS_N 0
extern struct Gpio __code SMI_N;
extern struct Gpio __code SUSB_N_PCH;
extern struct Gpio __code SUSC_N_PCH;
#define HAVE_SUSWARN_N 0
#define HAVE_SUS_PWR_ACK 0
extern struct Gpio __code SWI_N;
extern struct Gpio __code USB_PWR_EN_N;
extern struct Gpio __code VA_EC_EN;
#define HAVE_VR_ON 0
extern struct Gpio __code WLAN_EN;
extern struct Gpio __code WLAN_PWR_EN;
#define HAVE_XLP_OUT 0
#endif // _BOARD_GPIO_H

53
src/board/system76/addw1/include/board/keymap.h Normal file
View File

@ -0,0 +1,53 @@
// SPDX-License-Identifier: GPL-3.0-only
#ifndef _BOARD_KEYMAP_H
#define _BOARD_KEYMAP_H
// Keymap layers (normal, Fn)
#define KM_LAY 2
// Keymap output pins
#define KM_OUT 18
// Keymap input pins
#define KM_IN 8
// common/keymap.h requires KM_LAY, KM_OUT, and KM_IN definitions
#include <common/keymap.h>
// Conversion of physical layout to keyboard matrix
#define LAYOUT( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I, K0J, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, \
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F, \
K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, K4F, K4G, \
K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, K5B, K5C \
) { \
{ ___, ___, ___, ___, ___, ___, K50, K57 }, \
{ ___, ___, ___, ___, ___, ___, K53, K55 }, \
{ ___, ___, ___, ___, ___, ___, K40, K4B }, \
{ K52, ___, ___, ___, ___, ___, ___, K54 }, \
{ K41, K1H, ___, K2F, K4E, ___, ___, ___ }, \
{ K0I, K22, ___, ___, K1E, K3D, K3F, K30 }, \
{ K0J, K1B, K23, K39, ___, ___, K47, ___ }, \
{ K38, K26, K1A, K24, ___, K3A, K20, K00 }, \
{ K5B, K37, K2C, K19, K25, K07, K18, K01 }, \
{ K5C, K34, K36, K02, ___, K4G, K3B, K45 }, \
{ K1F, K48, ___, K2B, K32, K08, K06, K12 }, \
{ K1G, K49, K17, K33, ___, ___, K11, K2A }, \
{ K2D, ___, K31, K4A, ___, K03, K28, K16 }, \
{ ___, K44, K0D, K09, K46, K29, K15, K05 }, \
{ K21, K0A, K2E, K04, K3E, K0E, K0F, K14 }, \
{ K56, K42, K3C, K2H, K27, K2G, K13, K1D }, \
{ K0H, K0G, K43, K4C, K59, K10, K0B, K0C }, \
{ K35, K1C, K4F, K51, K4D, K58, K5A, ___ } \
}
// Position of physical Esc key in the matrix
#define MATRIX_ESC_INPUT 7
#define MATRIX_ESC_OUTPUT 7
// Position of physical Fn key in the matrix
#define MATRIX_FN_INPUT 3
#define MATRIX_FN_OUTPUT 17
#endif // _BOARD_KEYMAP_H

36
src/board/system76/addw1/kbled.c Normal file
View File

@ -0,0 +1,36 @@
// SPDX-License-Identifier: GPL-3.0-only
#include <board/kbled.h>
#include <ec/pwm.h>
void kbled_init(void) {
//TODO: enable PWMs
kbled_reset();
}
void kbled_reset(void) {
// Set brightness and color
kbled_set_color(0xFFFFFF);
kbled_set(0x00);
}
uint8_t kbled_get(void) {
// Get PWM for power
return DCR0;
}
void kbled_set(uint8_t level) {
// Set PWM for power
DCR0 = level;
}
void kbled_set_color(uint32_t color) {
// Set PWM for blue component
DCR7 = (uint8_t)(color);
// Set PWM for green component
DCR6 = (uint8_t)(color >> 8);
// Set PWM for red component
DCR5 = (uint8_t)(color >> 16);
}

24
src/board/system76/addw1/keymap/default.c Normal file
View File

@ -0,0 +1,24 @@
// SPDX-License-Identifier: GPL-3.0-only
// Default layout
#include <board/keymap.h>
uint16_t __code KEYMAP[KM_LAY][KM_OUT][KM_IN] = {
LAYOUT(
K_ESC, K_F1, K_F2, K_F3, K_F4, K_F5, K_F6, K_F7, K_F8, K_F9, K_F10, K_F11, K_F12, K_PRINT_SCREEN, K_INSERT, K_DEL, K_HOME, K_END, K_PGUP, K_PGDN,
K_TICK, K_1, K_2, K_3, K_4, K_5, K_6, K_7, K_8, K_9, K_0, K_MINUS, K_EQUALS, K_BKSP, K_NUM_LOCK, K_NUM_SLASH, K_NUM_ASTERISK, K_NUM_MINUS,
K_TAB, K_Q, K_W, K_E, K_R, K_T, K_Y, K_U, K_I, K_O, K_P, K_BRACE_OPEN, K_BRACE_CLOSE, K_BACKSLASH, K_NUM_7, K_NUM_8, K_NUM_9, K_NUM_PLUS,
K_CAPS, K_A, K_S, K_D, K_F, K_G, K_H, K_J, K_K, K_L, K_SEMICOLON, K_QUOTE, K_ENTER, K_NUM_4, K_NUM_5, K_NUM_6,
K_LEFT_SHIFT, K_Z, K_X, K_C, K_V, K_B, K_N, K_M, K_COMMA, K_PERIOD, K_SLASH, K_RIGHT_SHIFT, K_UP, K_NUM_1, K_NUM_2, K_NUM_3, K_NUM_ENTER,
K_LEFT_CTRL, KT_FN, K_LEFT_SUPER, K_LEFT_ALT, K_SPACE, K_RIGHT_ALT, K_APP, K_RIGHT_CTRL, K_LEFT, K_DOWN, K_RIGHT, K_NUM_0, K_NUM_PERIOD
),
LAYOUT(
K_ESC, K_TOUCHPAD, K_DISPLAY_TOGGLE, K_MUTE, K_F4, K_VOLUME_DOWN, K_VOLUME_UP, K_DISPLAY_MODE, K_BRIGHTNESS_DOWN, K_BRIGHTNESS_UP, K_CAMERA_TOGGLE, K_AIRPLANE_MODE, K_SUSPEND, K_PRINT_SCREEN, K_INSERT, K_DEL, K_HOME, K_END, K_PGUP, K_PGDN,
K_PLAY_PAUSE, K_FAN_TOGGLE, K_2, K_3, K_4, K_5, K_6, K_7, K_8, K_9, K_0, K_MINUS, K_EQUALS, K_BKSP, K_NUM_LOCK, K_KBD_COLOR, K_KBD_TOGGLE, K_KBD_DOWN,
K_TAB, K_Q, K_W, K_E, K_R, K_T, K_Y, K_U, K_I, K_O, K_P, K_BRACE_OPEN, K_BRACE_CLOSE, K_BACKSLASH, K_NUM_7, K_NUM_8, K_NUM_9, K_KBD_UP,
K_CAPS, K_A, K_S, K_D, K_F, K_G, K_H, K_J, K_K, K_L, K_SEMICOLON, K_QUOTE, K_ENTER, K_NUM_4, K_NUM_5, K_NUM_6,
K_LEFT_SHIFT, K_Z, K_X, K_C, K_V, K_B, K_N, K_M, K_COMMA, K_PERIOD, K_SLASH, K_RIGHT_SHIFT, K_UP, K_NUM_1, K_NUM_2, K_NUM_3, K_NUM_ENTER,
K_LEFT_CTRL, KT_FN, K_LEFT_SUPER, K_LEFT_ALT, K_SPACE, K_RIGHT_ALT, K_APP, K_RIGHT_CTRL, K_LEFT, K_DOWN, K_RIGHT, K_NUM_0, K_NUM_PERIOD
)
};

24
src/board/system76/addw1/keymap/jeremy.c Normal file
View File

@ -0,0 +1,24 @@
// SPDX-License-Identifier: GPL-3.0-only
// Default layout
#include <board/keymap.h>
uint16_t __code KEYMAP[KM_LAY][KM_OUT][KM_IN] = {
LAYOUT(
K_ESC, K_F1, K_F2, K_F3, K_F4, K_F5, K_F6, K_F7, K_F8, K_F9, K_F10, K_F11, K_F12, K_PRINT_SCREEN, K_INSERT, K_DEL, K_HOME, K_END, K_PGUP, K_PGDN,
K_TICK, K_1, K_2, K_3, K_4, K_5, K_6, K_7, K_8, K_9, K_0, K_MINUS, K_EQUALS, K_BKSP, K_NUM_LOCK, K_NUM_SLASH, K_NUM_ASTERISK, K_NUM_MINUS,
K_TAB, K_Q, K_W, K_E, K_R, K_T, K_Y, K_U, K_I, K_O, K_P, K_BRACE_OPEN, K_BRACE_CLOSE, K_BACKSLASH, K_NUM_7, K_NUM_8, K_NUM_9, K_NUM_PLUS,
KT_FN, K_A, K_S, K_D, K_F, K_G, K_H, K_J, K_K, K_L, K_SEMICOLON, K_QUOTE, K_ENTER, K_NUM_4, K_NUM_5, K_NUM_6,
K_LEFT_SHIFT, K_Z, K_X, K_C, K_V, K_B, K_N, K_M, K_COMMA, K_PERIOD, K_SLASH, K_RIGHT_SHIFT, K_UP, K_NUM_1, K_NUM_2, K_NUM_3, K_NUM_ENTER,
K_LEFT_CTRL, KT_FN, K_LEFT_ALT, K_LEFT_SUPER, K_SPACE, KT_FN, K_RIGHT_ALT, K_RIGHT_CTRL, K_LEFT, K_DOWN, K_RIGHT, K_NUM_0, K_NUM_PERIOD
),
LAYOUT(
K_ESC, K_TOUCHPAD, K_DISPLAY_TOGGLE, K_MUTE, K_F4, K_VOLUME_DOWN, K_VOLUME_UP, K_DISPLAY_MODE, K_BRIGHTNESS_DOWN, K_BRIGHTNESS_UP, K_CAMERA_TOGGLE, K_AIRPLANE_MODE, K_SUSPEND, K_PRINT_SCREEN, K_INSERT, K_DEL, K_HOME, K_END, K_PGUP, K_PGDN,
K_PLAY_PAUSE, K_FAN_TOGGLE, K_2, K_3, K_4, K_5, K_6, K_7, K_8, K_9, K_0, K_MINUS, K_EQUALS, K_DEL, K_NUM_LOCK, K_KBD_COLOR, K_KBD_TOGGLE, K_KBD_DOWN,
K_TAB, K_Q, K_W, K_E, K_R, K_T, K_Y, K_PGUP, K_HOME, K_PGDN, K_P, K_BRACE_OPEN, K_BRACE_CLOSE, K_BACKSLASH, K_NUM_7, K_NUM_8, K_NUM_9, K_KBD_UP,
KT_FN, K_A, K_S, K_D, K_F, K_G, K_LEFT, K_DOWN, K_UP, K_RIGHT, K_BKSP, K_DEL, K_ENTER, K_NUM_4, K_NUM_5, K_NUM_6,
K_LEFT_SHIFT, K_Z, K_X, K_C, K_V, K_B, K_END, K_M, K_COMMA, K_PERIOD, K_SLASH, K_RIGHT_SHIFT, K_UP, K_NUM_1, K_NUM_2, K_NUM_3, K_NUM_ENTER,
K_LEFT_CTRL, KT_FN, K_LEFT_ALT, K_LEFT_SUPER, K_ESC, KT_FN, K_RIGHT_ALT, K_RIGHT_CTRL, K_LEFT, K_DOWN, K_RIGHT, K_NUM_0, K_NUM_PERIOD
)
};

21
src/board/system76/addw2/gpio.c
View File

@ -48,15 +48,22 @@ void gpio_init() {
// Set GPIO data
GPDRA = 0x00;
GPDRB = 0x18;
// XLP_OUT, PWR_SW#
GPDRB = (1 << 4) | (1 << 3);
GPDRC = 0x00;
GPDRD = 0x38;
GPDRE = 0x40;
GPDRF = 0x40;
GPDRG = 0x41;
GPDRH = 0x80;
// PWR_BTN#, SCI#, SMI#
GPDRD = (1 << 5) | (1 << 4) | (1 << 3);
// PLVDD_RST_EC
GPDRE = (1 << 6);
// EC_PECI
GPDRF = (1 << 6);
// H_PROCHOT#_EC, LED_NUM#
GPDRG = (1 << 6) | (1 << 0);
// AIRPLAN_LED#
GPDRH = 0x80; // (1 << 7)
GPDRI = 0x00;
GPDRJ = 0x0C;
// LED_SCROLL#, LED_CAP#
GPDRJ = (1 << 3) | (1 << 2);
// Set GPIO control
// EC_PWM_LEDKB_P