0348800411
addw3: Enable USB-C power
2023-04-03 13:06:16 -06:00
f73160fad5
oryp11: Enable thunderbolt power
2023-04-03 13:06:16 -06:00
4aeb3669a0
Fix formatting
2023-04-03 13:06:16 -06:00
7587a6412d
oryp11: set EC_AMP_EN high
2023-04-03 13:06:16 -06:00
ba5438a79a
Update power state prior to using PECI
2023-04-03 13:06:16 -06:00
55df52a013
Remove unnecessary code from espi_event
2023-04-03 13:06:16 -06:00
cb8e0971c6
PECI ESPI timeout of 10ms
2023-04-03 13:06:16 -06:00
34ef03b19a
Fix ESPI vw_get and vw_set
2023-04-03 13:06:16 -06:00
33eaef2dd0
Reorder power plane detection
2023-04-03 13:06:16 -06:00
0d438a3314
Make sure power_state is S0 before attempting PECI
2023-04-03 13:06:16 -06:00
962d55309a
Gate peci_available on ESPI availability
2023-04-03 13:06:16 -06:00
fc1fda0725
Use EC_RSMRST# for S5 detection on eSPI systems as well
2023-04-03 13:06:16 -06:00
35d3c4f161
Fix style
2023-04-03 13:06:16 -06:00
6b80721138
oryp11: set prochot the right way
2023-04-03 13:06:16 -06:00
a0c81f6304
Improvements for determining CPU state using virtual wires
2023-04-03 13:06:16 -06:00
4e11f6220b
Fix comparisons of vw_get values
2023-04-03 13:06:16 -06:00
cea89a78d8
Use ESPI VW signals wherever possible
2023-04-03 13:06:16 -06:00
a5a677ee63
oryp11: fix some GPIO configuration
2023-04-03 13:06:16 -06:00
8c52a51af1
addw3: fix some GPIO configuration
2023-04-03 13:06:16 -06:00
cda67e6d1e
Fix stalls in getting PECI information over eSPI
2023-04-03 13:06:16 -06:00
9abd9d853a
common: peci: WIP peci_get_temp over espi
2023-04-03 13:06:16 -06:00
83f40c643f
ite: Add more eSPI registers
2023-04-03 13:06:16 -06:00
95a654aaff
common: peci: Remove extra shift in peci_get_temp
2023-04-03 13:06:16 -06:00
53f22a6658
common: Break out PECI GetTemp logic, prepare for PECI over ESPI
2023-04-03 13:06:16 -06:00
c8df652723
Rename gaze18-3050 to gaze18
2023-04-03 13:06:16 -06:00
9c59871986
Rename gaze18-40x0 to addw3
2023-04-03 13:06:16 -06:00
cd3e5ac329
Rename addp3 to oryp11
2023-04-03 13:06:16 -06:00
d68a42180b
Rename oryp11 to serw13
2023-04-03 13:06:16 -06:00
55f961406c
addp3: Use virtual wire for calculating power state
2023-04-03 13:06:16 -06:00
db10c198b3
addp3: Add new board
2023-04-03 13:06:16 -06:00
c7bc078cbd
gaze18-3050: Fix GPIOs for power sequence
...
Signed-off-by: Tim Crawford <tcrawford@system76.com >
2023-04-03 13:06:16 -06:00
60f9cfc8d6
gaze18-3050: Add new board
...
Signed-off-by: Tim Crawford <tcrawford@system76.com >
2023-04-03 13:06:16 -06:00
e4542d2aa5
oryp11: Adjust fan points
...
Signed-off-by: Tim Crawford <tcrawford@system76.com >
2023-04-03 13:06:16 -06:00
e4d7196b5c
oryp11: Increase AC power limit to 280W
...
Signed-off-by: Tim Crawford <tcrawford@system76.com >
2023-04-03 13:06:16 -06:00
d723e2e13d
gaze18-40x0: Fix prochot polarity
2023-04-03 13:06:16 -06:00
ff7d7138b0
Support power limits above 256W
2023-04-03 13:06:16 -06:00
8bd3b49273
gaze18-40x0: gpio fixes
2023-04-03 13:06:16 -06:00
213f79e2b6
oryp11: Add new board
...
Signed-off-by: Tim Crawford <tcrawford@system76.com >
2023-04-03 13:06:16 -06:00
bc111b7a4b
gaze18-40x0: Let PCH handle panel
2023-04-03 13:06:16 -06:00
ef6ea32c37
Add gaze18-40x0
2023-04-03 13:06:16 -06:00
1046dd7aec
Update Rust toolchain to 2023-01-21
...
Update the toolchain and deps, and use the sparse registry access.
Signed-off-by: Tim Crawford <tcrawford@system76.com >
2023-02-18 06:28:21 -07:00
96b2d78c2e
Remove PMC hack for S0ix
...
Whatever the issue was appears to be fixed after rebasing coreboot on
the 4.19 release. lemp11 has successfully reached S0ix with SLP_S0#
asserted when booted on battery power for 100 cycles.
Signed-off-by: Tim Crawford <tcrawford@system76.com >
2023-02-18 06:27:17 -07:00
ddb19e8738
ec/ite: Add Wake-Up Control registers
...
Groups 1, 3, and 4 require explicitly enabling the wake-up function
before unmasking them in INTC.
Signed-off-by: Tim Crawford <tcrawford@system76.com >
2023-02-07 10:47:24 -07:00
084aefd506
ec/ite: Add Interrupt Controller registers
...
- IT8587E has groups 0-18
- IT5570E has groups 0-21
- IT81202E has groups 0-23
Signed-off-by: Tim Crawford <tcrawford@system76.com >
2023-02-07 10:47:24 -07:00
59c386ec12
Move gpio_debug from board to EC code
...
The gpio_debug() functionality depends on the ITE registers and not
anything board-specific.
Signed-off-by: Tim Crawford <tcrawford@system76.com >
2023-01-23 14:26:30 -07:00
f687000a4f
ci: Install deps before running lints
...
Signed-off-by: Tim Crawford <tcrawford@system76.com >
2023-01-18 13:52:14 -07:00
7205f1a49e
Add shellcheck lint
...
Run shellcheck [1] on the bash files.
[1]: https://www.shellcheck.net/
Signed-off-by: Tim Crawford <tcrawford@system76.com >
2023-01-18 13:52:14 -07:00
623d3ce8ab
make: Add new targets
...
- fmt: Apply clang-format
- list-boards: list of available build targets
- help: Short description of make targets
Signed-off-by: Tim Crawford <tcrawford@system76.com >
2023-01-18 13:52:14 -07:00
58f9ed4051
Run lints at pre-commit
...
Install a hook to run lints at pre-commit to force issues to be fixed
during development.
This introduces a 5-10 second delay when committing due to how slow
clang-format is.
Signed-off-by: Tim Crawford <tcrawford@system76.com >
2023-01-18 13:52:14 -07:00
1aadc68257
scripts: Rewrite lint scripts
...
Rewrite lint scripts to report what they do and if they pass. In the
case they fail list the files that caused the failure, except for
clang-format, which will be slow to run of every file individually
(should just run `make fmt` anyway). Also add a script to run all the
lints in order with a single command.
Signed-off-by: Tim Crawford <tcrawford@system76.com >
2023-01-18 13:52:14 -07:00
