113a4b23ab
Fix lemp9 current draw
2020-04-05 11:54:34 -06:00
e8f8daae1b
Set input current limits
2020-04-05 10:34:25 -06:00
d901907942
Sync changed between system76 boards
2020-04-05 08:47:24 -06:00
825677bfb5
Turn off VDD3 when CPU is off and AC is not connected
2020-04-04 19:36:01 -06:00
ee8e0a2257
Correct GPIO control settings
2020-04-04 19:35:36 -06:00
ed0e662d60
Cut lemp9 charging current in half to lower charging heat
2020-04-04 15:11:59 -06:00
32055d825e
Re-enable interpolation of duty cycle
2020-04-04 13:30:33 -06:00
20d3808aed
Allow a config.mk to be created that contains BOARD, KEYMAP, etc.
2020-04-04 13:01:13 -06:00
9ee71097f9
Merge pull request #43 from system76/wip/fan
...
Fan curve improvements
2020-04-04 13:00:12 -06:00
abda4e744b
Ignore backup.rom and power.csv
2020-04-04 12:56:17 -06:00
eb578d427c
Show battery wattage instead of voltage and amperage
2020-04-04 09:53:41 -06:00
82b7079f73
Add tool for collecting power/temp information
2020-04-04 08:23:52 -06:00
62a909ee81
Improve fan curve
...
- Implement fan cooldown and heatup periods
- Add fan get/set commands
- Fix compilation with logging level lower than debug
2020-04-04 07:30:05 -06:00
4fdb9ecbdc
Fix fan turning on when powering on or resuming from suspend
2020-04-01 20:03:09 -06:00
d2ae447f4c
Merge pull request #40 from system76/wip/ghost
...
Ignore key presses that trigger ghost keys
2020-03-31 16:29:42 -06:00
9bf09e211c
kbscan: Ignore key presses with ghost keys
2020-03-31 13:40:56 -06:00
ebcd545746
kbscan: Add function to read row from matrix
2020-03-31 13:40:56 -06:00
6bfe5bb99a
Update Cargo.lock
2020-03-31 12:08:18 -06:00
b0f6d7314a
ectool 0.1.2 - support building on rust stable
2020-03-31 12:07:32 -06:00
d96147688d
Fix calculation of S3 power state, remove S4 power state
2020-03-17 12:49:11 -06:00
7fbad82088
Improve power handling to eliminate lockups
2020-03-17 11:12:59 -06:00
f179052dcb
Orientation for use with new adapter
2020-03-16 15:38:23 -06:00
25a60568d0
Add print command
2020-03-14 21:13:07 -06:00
8a8ab165a7
Improve print command
2020-03-14 21:06:18 -06:00
d800af5ed6
Fix unflipped pin mapping
2020-03-14 20:41:40 -06:00
606421abd1
Add console_external target
2020-03-14 20:40:44 -06:00
6cbc7b3ea1
Remove delays from parport_write
2020-03-14 20:39:47 -06:00
abcc8c00e0
Remove unnecessary sleeps from parallel_transaction
2020-03-14 20:38:52 -06:00
8f3588ef6b
Leave parallel pins in HiZ until a command is issued.
2020-03-14 20:05:35 -06:00
61c5ab1b3e
Merge pull request #35 from system76/wip/parport-logging
...
Debug logging over parallel port
2020-03-13 07:41:04 -06:00
85cd16ca30
WIP: Support parallel port logging with Arduino Uno
2020-03-12 14:19:55 -06:00
abf5c3f20b
mega2560: Add pin configuration for IT5570
2020-03-06 11:16:09 -07:00
f9a775e71b
docs: Add info for logging through parport
2020-03-06 11:16:04 -07:00
e5afb927b8
system76/*: Add parport logging
...
Add a build-time option to configure the parallel port for logging
instead of using it as a keyboard.
2020-03-06 11:15:58 -07:00
72b453ebd3
it8587e, it5570e: Implement logging to parport
...
Implement configuring the keyboard controller as a parallel host device
and writing to the parallel port. This allows the EC to send log
messages over the port.
2020-03-06 11:15:51 -07:00
0f666abb25
mega2560: Implement debug console command
...
Reconfigure the Mega 2560 as a parallel peripheral device to receive
logs from the EC over the keyboard port and output them to the serial
console.
2020-03-06 11:15:45 -07:00
2d86bd1f0c
readme: Update flash commands
2020-03-06 11:15:40 -07:00
364b7c3af8
Rename flash targets
2020-03-02 14:11:57 -07:00
e2c6fd7b82
ectool 0.1.1
2020-02-27 15:07:16 -07:00
ff01da5f12
Write and erase at the same time to improve speed
2020-02-27 15:05:28 -07:00
d1468da590
Use 1024 byte erase
2020-02-27 14:48:24 -07:00
33cc2a2a76
Better output when flashing EC
2020-02-27 14:46:32 -07:00
6ac21ace9c
Set spi target to main
2020-02-27 13:30:33 -07:00
fb7acd7c3c
Add ectool script
2020-02-27 13:22:10 -07:00
e8dd295daa
Parameterize flash_inner
2020-02-27 13:21:59 -07:00
a24f9ed3ae
Cleanup use of scratch rom for SPI flashing, prepare to implement no-reset flashing process
2020-02-27 13:21:04 -07:00
14bb3af80b
Fix lemp9 menu key #29
2020-02-26 15:14:43 -07:00
68b9acd249
Add ability to flash backup rom
2020-02-26 13:43:31 -07:00
1e1c626d71
Port changes from galp3-c to darp5 and lemp9
2020-02-26 13:11:50 -07:00
657437e1ce
Faster flashing with SMFI ( #32 )
...
* WIP: support for new flashing API
* Add SPI flashing support to tool
* Add timeouts when flashing with ectool
* Test SPI reading
* Use chunks for SPI commands
* Sanity test of flash size
* Read rom in sectors
* Relocate memmap region, remove PMC3
* Use ectool to flash
* Remove debugging of spi command
* Fix flashing over smfi
2020-02-26 09:04:40 -07:00
