Evan Lojewski
7aa5767455
keymap: Improve debouncing behavior.
...
- Update debouncing code to properly handle rollover.
- Update ghost debouncing to properly set the debounce start time.
Signed-off-by: Evan Lojewski <github@meklort.com >
2020-05-07 06:17:38 -06:00
Evan Lojewski
a6093d8708
keymap: Allow ghost keys to be pressed once the ghost is removed
...
- Don't record a ghost key as pressed
- Debouce on ghost release to allow ghosts to settle.
- Reduce debounce time from 20ms to 15ms.
Signed-off-by: Evan Lojewski <github@meklort.com >
2020-05-04 09:30:23 -06:00
Jeremy Soller
de7d507277
Fix release of key after release of layer key
2020-04-23 08:50:49 -06:00
WatchMkr
0cb4c20cff
Merge pull request #54 from system76/fan-curve
...
lemp9: lower maximum fan speed
2020-04-18 16:10:52 -06:00
Jeremy Soller
3a31121625
Add another fan point of 65% at 85C
2020-04-18 15:58:36 -06:00
Jeremy Soller
53d4c31798
lemp9: lower maximum fan speed
2020-04-17 15:28:35 -06:00
Jeremy Soller
357fae86fc
System76 common board directory ( #53 )
...
* Move configuration for battery into board.mk
* lemp9: remove tcpm code
* Move touchpad to its own module
* Add kbled_reset to all platforms, move items to run on CPU reset to a function
* Add defines for battery and charger address
* Add I2C_0 export to it5570e
* Move common system76 board functions into src/board/system76/common
2020-04-14 17:23:29 -06:00
Jeremy Soller
ba98a7073a
System76 EC is now released
2020-04-09 12:42:21 -06:00
Jeremy Soller
b4e1346edb
Remove power on after flashing support - BRAM is not persisted through AC disconnects
2020-04-09 09:18:25 -06:00
Jeremy Soller
65ba339fb5
Sync fan changes to darp5/galp3-c
2020-04-08 12:15:55 -06:00
Jeremy Soller
747dc84b5b
Increase heatup time to 10 seconds and disable interpolation
2020-04-08 12:14:01 -06:00
Tim Crawford
d05607475c
Add missing header for BRAM
2020-04-08 08:58:59 -06:00
Jeremy Soller
1194472b8f
Add power on after reset flag
2020-04-07 21:11:49 -06:00
Jeremy Soller
4303f0753e
Remove duplicate print of CPU power
2020-04-07 15:22:13 -06:00
Jeremy Soller
8559f6f48a
Allow clean to be run without BOARD being set
2020-04-07 12:13:06 -06:00
Tim Crawford
dfe3032f4d
make: Move clean target above BOARD check
2020-04-07 11:41:26 -06:00
Tim Crawford
2a86572f2b
Allow overriding version
...
In order to use the same version as the board firmware we need to be
able to specify the version string for the EC.
Ref: https://github.com/system76/firmware-open/issues/75
2020-04-07 08:01:16 -06:00
Jeremy Soller
a8b38d6b37
tool: 0.1.3 - add backup ROM flashing
2020-04-06 16:39:40 -06:00
Jeremy Soller
ff639a7836
Set fan to 100% when in scratch ROM
2020-04-06 14:19:11 -06:00
Jeremy Soller
dc246237c6
Add a watchdog timer of 10 seconds when using scratch ROM
2020-04-06 14:11:57 -06:00
Jeremy Soller
2d17acd919
Add PL1 and PL2 values
2020-04-06 08:14:16 -06:00
Jeremy Soller
8af9470c40
lemp9: lower fan curve maximum temperature to 80C
2020-04-05 13:16:05 -06:00
Jeremy Soller
113a4b23ab
Fix lemp9 current draw
2020-04-05 11:54:34 -06:00
Jeremy Soller
e8f8daae1b
Set input current limits
2020-04-05 10:34:25 -06:00
Jeremy Soller
d901907942
Sync changed between system76 boards
2020-04-05 08:47:24 -06:00
Jeremy Soller
825677bfb5
Turn off VDD3 when CPU is off and AC is not connected
2020-04-04 19:36:01 -06:00
Jeremy Soller
ee8e0a2257
Correct GPIO control settings
2020-04-04 19:35:36 -06:00
Jeremy Soller
ed0e662d60
Cut lemp9 charging current in half to lower charging heat
2020-04-04 15:11:59 -06:00
Jeremy Soller
32055d825e
Re-enable interpolation of duty cycle
2020-04-04 13:30:33 -06:00
Jeremy Soller
20d3808aed
Allow a config.mk to be created that contains BOARD, KEYMAP, etc.
2020-04-04 13:01:13 -06:00
Jeremy Soller
9ee71097f9
Merge pull request #43 from system76/wip/fan
...
Fan curve improvements
2020-04-04 13:00:12 -06:00
Jeremy Soller
abda4e744b
Ignore backup.rom and power.csv
2020-04-04 12:56:17 -06:00
Jeremy Soller
eb578d427c
Show battery wattage instead of voltage and amperage
2020-04-04 09:53:41 -06:00
Jeremy Soller
82b7079f73
Add tool for collecting power/temp information
2020-04-04 08:23:52 -06:00
Jeremy Soller
62a909ee81
Improve fan curve
...
- Implement fan cooldown and heatup periods
- Add fan get/set commands
- Fix compilation with logging level lower than debug
2020-04-04 07:30:05 -06:00
Jeremy Soller
4fdb9ecbdc
Fix fan turning on when powering on or resuming from suspend
2020-04-01 20:03:09 -06:00
Jeremy Soller
d2ae447f4c
Merge pull request #40 from system76/wip/ghost
...
Ignore key presses that trigger ghost keys
2020-03-31 16:29:42 -06:00
Tim Crawford
9bf09e211c
kbscan: Ignore key presses with ghost keys
2020-03-31 13:40:56 -06:00
Tim Crawford
ebcd545746
kbscan: Add function to read row from matrix
2020-03-31 13:40:56 -06:00
Jeremy Soller
6bfe5bb99a
Update Cargo.lock
2020-03-31 12:08:18 -06:00
Jeremy Soller
b0f6d7314a
ectool 0.1.2 - support building on rust stable
2020-03-31 12:07:32 -06:00
Jeremy Soller
d96147688d
Fix calculation of S3 power state, remove S4 power state
2020-03-17 12:49:11 -06:00
Jeremy Soller
7fbad82088
Improve power handling to eliminate lockups
2020-03-17 11:12:59 -06:00
Jeremy Soller
f179052dcb
Orientation for use with new adapter
2020-03-16 15:38:23 -06:00
Jeremy Soller
25a60568d0
Add print command
2020-03-14 21:13:07 -06:00
Jeremy Soller
8a8ab165a7
Improve print command
2020-03-14 21:06:18 -06:00
Jeremy Soller
d800af5ed6
Fix unflipped pin mapping
2020-03-14 20:41:40 -06:00
Jeremy Soller
606421abd1
Add console_external target
2020-03-14 20:40:44 -06:00
Jeremy Soller
6cbc7b3ea1
Remove delays from parport_write
2020-03-14 20:39:47 -06:00
Jeremy Soller
abcc8c00e0
Remove unnecessary sleeps from parallel_transaction
2020-03-14 20:38:52 -06:00
