Update coreboot submodule

- Modify ec, coreboot, and edk submodules to point to personal
  forks using relative URL path
- Add image and script to build firmware in docker container
- Move firmware update build steps from flash.sh to build.sh
  so it can be built inside docker container

.gitmodules

@@ -1,10 +1,10 @@
 [submodule "edk2"]
 	path = edk2
-	url = https://github.com/system76/edk2.git
+	url = ../system76-edk2.git
 	branch = system76
 [submodule "coreboot"]
 	path = coreboot
-	url = https://github.com/system76/coreboot.git
+	url = ../system76-coreboot.git
 	branch = system76
 [submodule "tools/UEFITool"]
 	path = tools/UEFITool
@@ -36,9 +36,13 @@
 	branch = master
 [submodule "ec"]
 	path = ec
-	url = https://github.com/system76/ec.git
+	url = ../system76-embedded-controller.git
-	branch = master
+	branch = main
 [submodule "tools/apobtool"]
 	path = tools/apobtool
 	url = https://github.com/system76/apobtool.git
 	branch = master
+[submodule "tools/intel-spi"]
+	path = tools/intel-spi
+	url = https://github.com/system76/intel-spi.git
+	branch = master

CHANGELOG.md

@@ -4,10 +4,99 @@ Changes are identified by the date of the released firmware including them. If
 you are running System76 Open Firmware, opening the boot menu will show this
 date followed by an underscore and a short git revision. To see if specific
 features apply to your model and firmware version, see the
-[feature matrix](./FEATURES.md).
+[feature matrix](./docs/features.md).
 
 ## unreleased
 
+- whl-u: Updated CSME to 12.0.95.2489v2 (12.0.94.2428)
+- cfl: Updated CSME to 12.0.94.2380v9 (12.0.94.2428)
+- mtl: Fixed detection of USB3 hubs in Type-C ports
+- darp10: Fixed reporting of the second fan
+- darp10: Fixed using USB3 devices at USB3 speeds in all ports
+- darp10: Updated fan tables
+- Fixed IT8587E hang when reading keyboard matrix
+- Changed fans to use highest reported temperature to calculate duty instead
+  of using the highest calculated duty across all fans
+- bonw15-b: Added initial release of open firmware with System76 EC
+- Changed fan mechanism from calculated interpolation/smoothing to a fixed
+  step to limit rapid changes in duty over short periods
+- Updated coreboot to 24.08
+
+## 2024-07-08
+
+- cml-h: Updated CSME to 14.1.74.2355v6 (14.1.72.2287)
+- cml-u: Updated CSME to 14.1.74.2355v6 (14.1.74.2373)
+- Reverted unlock prompt change to restore intended behavior
+
+## 2024-07-01
+
+- mtl: Updated FSP to D.0.A8.20
+- adl: Fixed USB 3.0 hubs in Type-C ports
+- rpl: Fixed USB 3.0 hubs in Type-C ports
+- Fixed touchpad in PS/2 mode
+- tgl: Updated CSME to 15.0.49.2573
+- Fixed unlock prompt showing when system is already unlocked
+- lemp13-b: Added support for units with 5600 MT/s soldered RAM
+
+## 2024-05-28
+
+- tgl: Updated Intel GOP driver to 17.0.1077
+- tgl: Updated VBT to 250
+- Updated Rust toolchain to nightly-2024-05-11
+
+## 2024-05-17
+
+- lemp13-b: Added initial release of open firmware with System76 EC
+
+## 2024-05-07
+
+- darp10: Added initial release of open firmware with System76 EC
+- darp10-b: Added initial release of open firmware with System76 EC
+
+## 2024-04-29
+
+- Fixed CMOS options not working due to invalid checksum
+
+## 2024-03-25
+
+- lemp13: Added initial release of open firmware with System76 EC
+
+## 2024-03-21
+
+- oryp12: Added initial release of open firmware with System76 EC
+
+## 2024-03-11
+
+- Updated coreboot to 24.02
+- adl-p: Updated FSP to C.1.75.10
+- adl-s: Updated FSP to C.0.75.10
+- adl: Updated microcode to revision 0x430
+- rpl-p: Updated FSP to C.1.BD.40
+- rpl-s: Updated FSP to C.0.BD.40
+- rpl: Updated microcode to revision 0x411c
+- tgl: Updated FSP to A.0.7E.70
+- tgl-u: Updated microcode to revision 0xb4
+- tgl-h: Updated microcode to revision 0x4e
+- adl: Fixed PCIe 4.0 drives in PCIe 3.0 slot failing to initialize on resume
+- rpl: Fixed PCIe 4.0 drives in PCIe 3.0 slot failing to initialize on resume
+- rpl: Fixed TCSS ACPI access
+- adl: Fixed `SLP_S0#` counter frequency
+- rpl: Fixed `SLP_S0#` counter frequency
+- tgl: Fixed TBT ACPI
+- Fixed RTC being reset on boot during February 29th
+- addw4: Added initial release of open firmware with System76 EC
+
+## 2024-01-18
+
+- darp9: Added SSD RTD3 configs to fix suspend with some drives
+
+## 2024-01-10
+
+- darp8: Fixed suspend issue on new boards by switching to S0ix by default
+- darp9: Fixed suspend issue on new boards by switching to S0ix by default
+
+## 2023-10-20
+
 - tgl-u: Fixed CPU not going lower than C2 due to card reader LTR
 - bonw15: Fixed speaker audio cutting in/out
 - oryp11: Fixed speaker audio cutting in/out

Jenkinsfile

@@ -7,7 +7,7 @@
 // - Pipeline (https://plugins.jenkins.io/workflow-aggregator/)
 // - Slack Notification (https://plugins.jenkins.io/slack/)
 
-def all_models = 'addw2 addw3 bonw14 bonw15 darp5 darp6 darp7 darp8 darp9 galp3-c galp4 galp5 galp6 galp7 gaze15 gaze16-3050 gaze16-3060 gaze16-3060-b gaze16-3050 gaze16-3060-b gaze17-3050 gaze17-3060-b gaze18 lemp9 lemp10 lemp11 lemp12 oryp5 oryp6 oryp7 oryp8 oryp9 oryp10 oryp11 serw13'
+def all_models = 'addw2 addw3 addw4 bonw14 bonw15 darp5 darp6 darp7 darp8 darp9 darp10 darp10-b galp3-c galp4 galp5 galp6 galp7 gaze15 gaze16-3050 gaze16-3060 gaze16-3060-b gaze16-3050 gaze16-3060-b gaze17-3050 gaze17-3060-b gaze18 lemp9 lemp10 lemp11 lemp12 lemp13 lemp13-b oryp5 oryp6 oryp7 oryp8 oryp9 oryp10 oryp11 oryp12 serw13'
 
 void setBuildStatus(String state, String message) {
     // FIXME: https://www.jenkins.io/doc/book/pipeline/jenkinsfile/#string-interpolation
@@ -54,6 +54,11 @@ pipeline {
                 setBuildStatus("pending", "Pending")
                 slackSend(color: "good", message: "${env.JOB_NAME} - #${env.BUILD_ID} started (<${env.BUILD_URL}|Open>)")
 
+                sh """#!/bin/bash
+                    # Update submodule URLs because of coreboot
+                    git submodule sync --recursive
+                """
+
                 // https://www.jenkins.io/doc/pipeline/steps/params/scmgit/
                 checkout scmGit(
                     branches: [[name: '${SOURCE_BRANCH}']],

LICENSE.md

@@ -33,7 +33,7 @@ The license for the embedded controller firmware depends on the binary used.
 
 #### Intel binaries
 
-Intel provides biniaries under a redistributable license, which may be
+Intel provides binaries under a redistributable license, which may be
 different per binary.
 
 - `me.rom`: Intel CSME

README.md

@@ -3,59 +3,10 @@
 An open source distribution of firmware utilizing coreboot, EDK2, and System76
 firmware applications.
 
-## Supported models and features
+## Resources
 
-To view models that are supported and will receive updates through the firmware
+- [Project site](https://github.com/system76/firmware-open)
-manager, as well as available features for those models, please see the
+- [Documentation](./docs/index.md)
-[feature matrix](./FEATURES.md).
+- [Issue tracker](https://github.com/system76/firmware-open/issues/)
-
+- [Changelog](./CHANGELOG.md)
-Other models may be in development or available without support, and can be
+- [Legal information](./LICENSE.md)
-seen in the `models/` directory.
-
-If the device becomes bricked it will require restoring the current firmware
-using an external programmer. See [flashing](./docs/flashing.md) for details.
-
-### Schematics
-
-System76 customers may request board schematics for their system by sending an
-email to firmware@system76.com with the subject line  "Schematics for _model_",
-where _model_ is one of the supported models listed above. Please include the
-serial number of your system for verification.
-
-You may not share these without explicit permission from System76.
-
-## Changelog
-
-For a list of important changes please see the [changelog](./CHANGELOG.md).
-
-## Building
-
-Dependencies can be installed with the provided script.
-
-```sh
-./scripts/install-deps.sh
-```
-
-If rustup was installed for the first time, it will be required to source the
-environment file it installed to use the correct Rust toolchain.
-
-```
-source ~/.cargo/env
-```
-
-A script is provided to build the firmware. The available targets for building
-are the model folders in `models/`. For example, to build for QEMU:
-
-```
-./scripts/build.sh qemu
-```
-
-Once built, the firmware must be flashed to use. Several scripts are available
-to flash the new firmware, depending on how it is going to be written.
-
-- `scripts/qemu.sh`: [Run the firmware in QEMU](./docs/debugging.md#using-qemu) (specific to the QEMU model)
-- `scripts/flash.sh`: Flash using the internal flasher
-- `scripts/ch341a-flash.sh`: Flash using a CH341A programmer
-- `scripts/spipi-flash.sh`: Flash using a Raspberry Pi
-
-See [Flashing firmware](./docs/flashing.md) for more details.

docker/Dockerfile

@@ -0,0 +1,67 @@
+FROM ubuntu:20.04
+
+# Install most dependencies
+USER root
+ARG TZ="America/New_York"
+ARG DEBIAN_FRONTEND=noninteractive
+RUN apt-get update && \
+    apt-get upgrade -y && \
+    apt-get install -y --no-install-recommends \
+    adduser \
+    sudo \
+    tzdata \
+    build-essential \
+    ccache \
+    cmake \
+    curl \
+    dosfstools \
+    flashrom \
+    git-lfs \
+    libncurses-dev \
+    libssl-dev \
+    libudev-dev \
+    mtools \
+    parted \
+    pkgconf \
+    python-is-python3 \
+    python3-distutils \
+    uuid-dev \
+    zlib1g-dev \
+    bison \
+    bzip2 \
+    ca-certificates \
+    flex \
+    g++ \
+    gcc \
+    gnat \
+    libnss3-dev \
+    patch \
+    tar \
+    xz-utils \
+    avr-libc \
+    avrdude \
+    clang-format \
+    gcc-avr \
+    libc-dev \
+    libhidapi-dev \
+    libudev-dev \
+    sdcc \
+    shellcheck \
+    xxd
+
+# Create non-root user with disabled password and sudo privileges
+ARG USER=docker
+RUN adduser --disabled-password --gecos '' ${USER}
+RUN adduser ${USER} sudo
+RUN echo '%sudo ALL=(ALL) NOPASSWD:ALL' >> /etc/sudoers
+
+# Enter build directory in user's home
+USER ${USER}
+ARG BUILD_DIR=/home/${USER}/firmware-open
+WORKDIR ${BUILD_DIR}
+
+# Set git configuration (required by some scripts)
+ARG GIT_NAME="Docker User"
+ARG GIT_EMAIL="docker@gmail.com"
+RUN git config --global user.name "${GIT_NAME}"
+RUN git config --global user.email "${GIT_EMAIL}"

docs/README.md

@@ -1 +0,0 @@
-# System76 Open Firmware Documentation

docs/SUMMARY.md

@@ -0,0 +1,11 @@
+# Summary
+
+- [Index](./index.md)
+- [Firmware features](./features.md)
+- [Building firmware](./building.md)
+- [Flashing firmware](./flashing.md)
+- [Debugging](./debugging.md)
+- [Adding a new board](./adding-a-new-board.md)
+- [Intel CSME](./intel-me.md)
+- [UEFI](./uefi.md)
+- [Schematics](./schematics.md)

docs/adding-a-new-board.md

@@ -71,16 +71,10 @@ Other things that should be dumped before porting/flashing are:
 
 To port coreboot to a new board, see the coreboot documentation.
 
-Once coreboot is ported, add its configuration.
+Add a `coreboot.config` file to the model directory. This can be copied from
-
+another similar board as a reference, just updating the name. Typically, the
-```
+only special cases that need to be handled are when an FSP or microcode is
-cp coreboot/.config models/<model>/coreboot.config
+used that are not part of coreboot.
-```
-
-### devicetree
-
-`generate.sh` does not create `devicetree.cb`. Some values for this file can be
-produced using the `devicetree.py` script.
 
 ### Smart amp
 

docs/book.toml

@@ -0,0 +1,18 @@
+[book]
+title = "System76 Open Firmware"
+description = "System76 Open Firmware documentation"
+language = "en"
+src = "."
+
+[build]
+build-dir = "../build/docs"
+create-missing = false
+
+[output.html]
+default-theme = "rust"
+preferred-dark-theme = "coal"
+no-section-label = true
+git-repository-url = "https://github.com/system76/firmware-open"
+
+[output.html.print]
+enable = false

docs/building.md

@@ -0,0 +1,31 @@
+# Building
+
+Dependencies can be installed with the provided script.
+
+```
+./scripts/install-deps.sh
+```
+
+If rustup was installed for the first time, it will be required to source the
+environment file it installed to use the correct Rust toolchain.
+
+```
+. ~/.cargo/env
+```
+
+A script is provided to build the firmware. The available targets for building
+are the model folders in `models/`. For example, to build for QEMU:
+
+```
+./scripts/build.sh qemu
+```
+
+Once built, the firmware must be flashed to use. Several scripts are available
+to flash the new firmware, depending on how it is going to be written.
+
+- `scripts/qemu.sh`: [Run the firmware in QEMU](./debugging.md#using-qemu) (specific to the QEMU model)
+- `scripts/flash.sh`: Flash using firmware-update
+- `scripts/ch341a-flash.sh`: Flash using a CH341A programmer
+- `scripts/spipi-flash.sh`: Flash using a Raspberry Pi
+
+See [Flashing firmware](./flashing.md) for more details.

docs/features.md

@@ -4,7 +4,7 @@ This lists important features provided by System76 Open Firmware. Your system
 must be updated to at least the firmware version specified in the following
 [platform tables](#platforms) to include all specified [features](#features).
 To see the changes in specific firmware versions, see the
-[changelog](./CHANGELOG.md).
+[changelog](./../CHANGELOG.md).
 
 ## Platforms
 

docs/flashing.md

@@ -13,16 +13,44 @@ coreboot's `cbmem` tool can be used to verify this. The call to
 `FspMemoryInit()` can report 20+ seconds on the first boot, and a few hundred
 milliseconds on subsequent boots.
 
+## UEFI application
+
+This is the default method for flashing firmware (using firmware-update). When
+used from this repo, it only works with systems running System76 open firmware.
+
+```
+./scripts/flash.sh <model>
+```
+
+By default the script will attempt to flash both the BIOS and the EC. Their
+respective file can be deleted to skip flashing them.
+
+If the EC is flashed, the system will immediately power off.
+
 ## Internal programmer
 
-Use this method for flashing a system already running System76 Open Firmware.
+### Availability
+
+This method is only possible when firmware is unlocked. Firmware is unlocked by
+one of two methods:
+
+- The EC feature `CONFIG_SECURITY` is unset/disabled
+- The EC is unlock for a single boot (via firmware-update or ectool)
+
+The current state can be determined using ectool:
 
 ```
-./scripts/flash.sh <model> [--without-ec]
+./ec/scripts/ectool.sh security
 ```
 
-By default the script will attempt to flash the EC. If the EC is flashed, the
+- `Lock`: This method can't be used
-system will immediately power off.
+- `Unlock`: This method can be used
+
+### flashrom
+
+```
+sudo flashrom -p internal -w build/<model>/firmware.rom
+```
 
 ## External programmer
 
@@ -31,13 +59,14 @@ Use one of these methods for first-time flashing or flashing a bricked system.
 ### Identifying the BIOS chip
 
 The packaging and protocol can be determined by `board_info.txt` in coreboot.
-Pin 1 is marked by a small dot indent and a white paint mark. The silkscreen
+Pin 1 is sometimes marked by a small dot indent and a white paint mark. The
-may also indicate pin 1.
+silkscreen may also indicate pin 1.
 
 ### CH341A USB programmer - slower, but easier to set up
 
 These can be purchased from many places for around 15 USD. Make sure that the
 one you get has a ROM clip. Here are some examples:
+
 - [Amazon.com, Organizer.](https://www.amazon.com/Organizer-Socket-Adpter-Programmer-CH341A/dp/B07R5LPTYM)
 - [Amazon.com, KeeYees.](https://www.amazon.com/KeeYees-SOIC8-EEPROM-CH341A-Programmer/dp/B07SHSL9X9) 
 - [AliExpress.com, TZT.](https://aliexpress.com/item/32725360255.html)

docs/index.md

@@ -0,0 +1,9 @@
+# Documentation
+
+This is the documentation for System76 Open Firmware. It is set up to be used
+with [mdBook](https://github.com/rust-lang/mdBook), which can generate HTML
+output for easy navigation.
+
+```
+mdbook build --open docs/
+```

docs/intel-me.md

@@ -55,15 +55,18 @@ ME: Current Operation Mode      : 0
 ME: Error Code                  : 0
 ```
 
-## Tiger Lake-U
+## S0ix
 
-Models using TGL-U processors default to having the IME enabled. TGL-U removes
+S0ix (Modern Standby, s2idle) requires all CPU, PCH, and PCIe devices to have
-support for S3 and requires S0ix. This requires all CPU, PCH, and PCIe devices
+ACPI defined low power states. The CPU has numerous states for low power, with
-to have ACPI defined low power states. With S0ix, the CPU has numerous states
+the lowest being C10. In order to reach this C10 state, the CSME must report
-for low power, with the lowest being C10. In order to reach this C10 state, the
+that it is in a low power state.
-IME must report that it is in a low power state. Disabling the ME with the HAP
+
-bit keeps the CPU in the C8 state. This nearly triples the power usage in S0ix
+Disabling the CSME with the HAP bit or HECI command keeps the CPU in the C8
-suspend, from around 1 watt to around 3 watts.
+state. This nearly triples the power usage in S0ix suspend, from around 1 watt
+to around 3 watts.
+
+TGL-U removed support for S3 and requires S0ix.
 
 
 [wiki]: https://en.wikipedia.org/wiki/Intel_Management_Engine

docs/schematics.md

@@ -0,0 +1,18 @@
+# Schematics
+
+## Systems using System76 Open Firmware
+
+System76 customers may request board schematics for their system by sending an
+email to `firmware@system76.com` with the subject line:
+
+> Schematics for <model>
+
+where `<model>` is a model that uses firmware-open. Include the serial number
+of your system for verification.
+
+You may not share these without explicit permission from System76.
+
+## Other models and components
+
+System76 cannot provide schematics for models not using firmware-open, nor
+datasheets for any components that are not already publicly available.

docs/uefi.md

@@ -14,12 +14,15 @@ Network functionality is disabled. Native PXE booting is not supported.
 
 ### Secure Boot
 
-Secure Boot support is currently disabled.
+Secure Boot support is enabled since system76/firmware-open@105e74b14613
+(2023-04-03).
 
-The implementation from 9elements is in development. If building a custom
+A minimal firmware UI is available to delete all keys and enroll the default
-image, the edk2 config `SECURE_BOOT_ENABLE` can be set to enable support.
+keys. It is intended that most management is done from the OS.
 
-There is currently no firmware UI to view or configure Secure Boot.
+Note that the Secure Boot support present is only intended for allowing
+Microsoft Windows installation checks to pass. It should not be relied on for
+system security due to limitations of the implementation.
 
 ## Shell
 

fsp/mtl/4122.12/MeteorLakeFspBinPkg/Include/FirmwareVersionInfo.h

@@ -18,6 +18,7 @@
 #include <IndustryStandard/SmBios.h>
 
 #define INTEL_FIRMWARE_VERSION_INFO_GROUP_NAME    "Firmware Version Info"
+#define INTEL_FVI_SMBIOS_TYPE                     0xDD
 
 #pragma pack(1)
 

fsp/mtl/4122.12/MeteorLakeFspBinPkg/Include/FspProducerDataHeader.h

@@ -0,0 +1,80 @@
+/** @file
+
+  Copyright (c) 2023, Intel Corporation. All rights reserved.<BR>
+  This program and the accompanying materials
+  are licensed and made available under the terms and conditions of the BSD License
+  which accompanies this distribution. The full text of the license may be found at
+  http://opensource.org/licenses/bsd-license.php
+
+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+**/
+#ifndef _FSP_PRODUCER_DATA_HEADER_H_
+#define _FSP_PRODUCER_DATA_HEADER_H_
+
+#include <Guid/FspHeaderFile.h>
+
+#define BUILD_TIME_STAMP_SIZE 12
+
+//
+// FSP Header Data structure from FspHeader driver.
+//
+#pragma pack(1)
+///
+/// FSP Producer Data Subtype - 1
+///
+typedef struct {
+  ///
+  /// Byte 0x00: Length of this FSP producer data type record.
+  ///
+  UINT16  Length;
+  ///
+  /// Byte 0x02: FSP producer data type.
+  ///
+  UINT8   Type;
+  ///
+  /// Byte 0x03: Revision of this FSP producer data type.
+  ///
+  UINT8   Revision;
+  ///
+  /// Byte 0x04: 4 byte field of RC version which is used to build this FSP image.
+  ///
+  UINT32  RcVersion;
+  ///
+  /// Byte 0x08: Represents the build time stamp "YYYYMMDDHHMM".
+  ///
+  UINT8  BuildTimeStamp[BUILD_TIME_STAMP_SIZE];
+} FSP_PRODUCER_DATA_TYPE1;
+
+///
+/// FSP Producer Data Subtype - 2
+///
+typedef struct {
+  ///
+  /// Byte 0x00: Length of this FSP producer data type record.
+  ///
+  UINT16  Length;
+  ///
+  /// Byte 0x02: FSP producer data type.
+  ///
+  UINT8   Type;
+  ///
+  /// Byte 0x03: Revision of this FSP producer data type.
+  ///
+  UINT8   Revision;
+  ///
+  /// Byte 0x04: 4 byte field of Mrc version which is used to build this FSP image.
+  ///
+  UINT8  MrcVersion [4];
+} FSP_PRODUCER_DATA_TYPE2;
+
+typedef struct {
+  FSP_INFO_HEADER          FspInfoHeader;
+  FSP_INFO_EXTENDED_HEADER FspInfoExtendedHeader;
+  FSP_PRODUCER_DATA_TYPE1  FspProduceDataType1;
+  FSP_PRODUCER_DATA_TYPE2  FspProduceDataType2;
+  FSP_PATCH_TABLE          FspPatchTable;
+} FSP_PRODUCER_DATA_TABLES;
+#pragma pack()
+
+#endif // _FSP_PRODUCER_DATA_HEADER_H

fsp/mtl/4122.12/MeteorLakeFspBinPkg/Include/FspUpd.h

@@ -1,6 +1,6 @@
 /** @file
 
-Copyright (c) 2023, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2024, Intel Corporation. All rights reserved.<BR>
 
 Redistribution and use in source and binary forms, with or without modification,
 are permitted provided that the following conditions are met:
@@ -37,11 +37,11 @@ are permitted provided that the following conditions are met:
 
 #pragma pack(1)
 
-#define FSPT_UPD_SIGNATURE               0x545F4450554C4441        /* 'ADLUPD_T' */
+#define FSPT_UPD_SIGNATURE               0x545F4450554C544D        /* 'MTLUPD_T' */
 
-#define FSPM_UPD_SIGNATURE               0x4D5F4450554C4441        /* 'ADLUPD_M' */
+#define FSPM_UPD_SIGNATURE               0x4D5F4450554C544D        /* 'MTLUPD_M' */
 
-#define FSPS_UPD_SIGNATURE               0x535F4450554C4441        /* 'ADLUPD_S' */
+#define FSPS_UPD_SIGNATURE               0x535F4450554C544D        /* 'MTLUPD_S' */
 
 #pragma pack()
 

fsp/mtl/4122.12/MeteorLakeFspBinPkg/Include/FsptUpd.h

@@ -1,6 +1,6 @@
 /** @file
 
-Copyright (c) 2023, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2024, Intel Corporation. All rights reserved.<BR>
 
 Redistribution and use in source and binary forms, with or without modification,
 are permitted provided that the following conditions are met:
@@ -74,8 +74,7 @@ typedef struct {
   UINT8                       PcdSerialIoUartDebugEnable;
 
 /** Offset 0x0061 - PcdSerialIoUartNumber
-  Select SerialIo Uart Controller for debug. Note: If UART0 is selected as CNVi BT
+  Select SerialIo Uart Controller for debug.
-  Core interface, it cannot be used for debug purpose.
   0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2
 **/
   UINT8                       PcdSerialIoUartNumber;
@@ -87,9 +86,11 @@ typedef struct {
 **/
   UINT8                       PcdSerialIoUartMode;
 
-/** Offset 0x0063
+/** Offset 0x0063 - PcdSerialIoUartPowerGating - FSPT
+  Select SerialIo Uart Controller Powergating mode
+  0:Disabled, 1:Enabled, 2:Auto
 **/
-  UINT8                       Rsvd00;
+  UINT8                       PcdSerialIoUartPowerGating;
 
 /** Offset 0x0064 - PcdSerialIoUartBaudRate - FSPT
   Set default BaudRate Supported from 0 - default to 6000000
@@ -157,19 +158,24 @@ typedef struct {
 **/
   UINT32                      PcdSerialIoUartDebugMmioBase;
 
-/** Offset 0x008C - PcdLpcUartDebugEnable
+/** Offset 0x008C - PcdSerialIoUartDebugPciCfgBase - FSPT
+  Specify PciCfgBase address. Allows for SerialIO UART functionality outside Bus 0
+**/
+  UINT32                      PcdSerialIoUartDebugPciCfgBase;
+
+/** Offset 0x0090 - PcdLpcUartDebugEnable
   Enable to initialize LPC Uart device in FSP.
   0:Disable, 1:Enable
 **/
   UINT8                       PcdLpcUartDebugEnable;
 
-/** Offset 0x008D - Debug Interfaces
+/** Offset 0x0091 - Debug Interfaces
   Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub,
   BIT2 - Not used.
 **/
   UINT8                       PcdDebugInterfaceFlags;
 
-/** Offset 0x008E - PcdSerialDebugLevel
+/** Offset 0x0092 - PcdSerialDebugLevel
   Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load,
   Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings,
   Info & Verbose.
@@ -178,149 +184,206 @@ typedef struct {
 **/
   UINT8                       PcdSerialDebugLevel;
 
-/** Offset 0x008F - ISA Serial Base selection
+/** Offset 0x0093 - ISA Serial Base selection
   Select ISA Serial Base address. Default is 0x3F8.
   0:0x3F8, 1:0x2F8
 **/
   UINT8                       PcdIsaSerialUartBase;
 
-/** Offset 0x0090 - PcdSerialIo2ndUartEnable
+/** Offset 0x0094 - PcdSerialIo2ndUartEnable
   Enable Additional SerialIo Uart device in FSP.
   0:Disable, 1:Enable and Initialize, 2:Enable without Initializing
 **/
   UINT8                       PcdSerialIo2ndUartEnable;
 
-/** Offset 0x0091 - PcdSerialIo2ndUartNumber
+/** Offset 0x0095 - PcdSerialIo2ndUartNumber
   Select SerialIo Uart Controller Number
   0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2
 **/
   UINT8                       PcdSerialIo2ndUartNumber;
 
-/** Offset 0x0092 - PcdSerialIo2ndUartMode - FSPT
+/** Offset 0x0096 - PcdSerialIo2ndUartMode - FSPT
   Select SerialIo Uart Controller mode
   0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom,
   4:SerialIoUartSkipInit
 **/
   UINT8                       PcdSerialIo2ndUartMode;
 
-/** Offset 0x0093
+/** Offset 0x0097
 **/
-  UINT8                       Rsvd01;
+  UINT8                       Rsvd020[1];
 
-/** Offset 0x0094 - PcdSerialIo2ndUartBaudRate - FSPT
+/** Offset 0x0098 - PcdSerialIo2ndUartBaudRate - FSPT
   Set default BaudRate Supported from 0 - default to 6000000
 **/
   UINT32                      PcdSerialIo2ndUartBaudRate;
 
-/** Offset 0x0098 - PcdSerialIo2ndUartParity - FSPT
+/** Offset 0x009C - PcdSerialIo2ndUartParity - FSPT
   Set default Parity.
   0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity
 **/
   UINT8                       PcdSerialIo2ndUartParity;
 
-/** Offset 0x0099 - PcdSerialIo2ndUartDataBits - FSPT
+/** Offset 0x009D - PcdSerialIo2ndUartDataBits - FSPT
   Set default word length. 0: Default, 5,6,7,8
 **/
   UINT8                       PcdSerialIo2ndUartDataBits;
 
-/** Offset 0x009A - PcdSerialIo2ndUartStopBits - FSPT
+/** Offset 0x009E - PcdSerialIo2ndUartStopBits - FSPT
   Set default stop bits.
   0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits
 **/
   UINT8                       PcdSerialIo2ndUartStopBits;
 
-/** Offset 0x009B - PcdSerialIo2ndUartAutoFlow - FSPT
+/** Offset 0x009F - PcdSerialIo2ndUartAutoFlow - FSPT
   Enables UART hardware flow control, CTS and RTS lines.
   0: Disable, 1:Enable
 **/
   UINT8                       PcdSerialIo2ndUartAutoFlow;
 
-/** Offset 0x009C - PcdSerialIo2ndUartRxPinMux - FSPT
+/** Offset 0x00A0 - PcdSerialIo2ndUartRxPinMux - FSPT
   Select RX pin muxing for SerialIo UART
 **/
   UINT32                      PcdSerialIo2ndUartRxPinMux;
 
-/** Offset 0x00A0 - PcdSerialIo2ndUartTxPinMux - FSPT
+/** Offset 0x00A4 - PcdSerialIo2ndUartTxPinMux - FSPT
   Select TX pin muxing for SerialIo UART
 **/
   UINT32                      PcdSerialIo2ndUartTxPinMux;
 
-/** Offset 0x00A4 - PcdSerialIo2ndUartRtsPinMux - FSPT
+/** Offset 0x00A8 - PcdSerialIo2ndUartRtsPinMux - FSPT
   Select SerialIo Uart Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS*
   for possible values.
 **/
   UINT32                      PcdSerialIo2ndUartRtsPinMux;
 
-/** Offset 0x00A8 - PcdSerialIo2ndUartCtsPinMux - FSPT
+/** Offset 0x00AC - PcdSerialIo2ndUartCtsPinMux - FSPT
   Select SerialIo Uart Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS*
   for possible values.
 **/
   UINT32                      PcdSerialIo2ndUartCtsPinMux;
 
-/** Offset 0x00AC - PcdSerialIo2ndUartMmioBase - FSPT
+/** Offset 0x00B0 - PcdSerialIo2ndUartMmioBase - FSPT
   Select SerialIo Uart default MMIO resource in SEC/PEI phase when PcdSerialIo2ndUartMode
   = SerialIoUartPci.
 **/
   UINT32                      PcdSerialIo2ndUartMmioBase;
 
-/** Offset 0x00B0
+/** Offset 0x00B4 - PcdSerialIo2ndUartPciCfgBase - FSPT
+  Specify PciCfgBase address. Allows for SerialIO UART functionality outside Bus 0
+**/
+  UINT32                      PcdSerialIo2ndUartPciCfgBase;
+
+/** Offset 0x00B8
 **/
   UINT32                      TopMemoryCacheSize;
 
-/** Offset 0x00B4 - FspDebugHandler
+/** Offset 0x00BC - FspDebugHandler
   <b>Optional</b> pointer to the boot loader's implementation of FSP_DEBUG_HANDLER.
 **/
   UINT32                      FspDebugHandler;
 
-/** Offset 0x00B8 - Serial Io SPI Chip Select Polarity
+/** Offset 0x00C0 - Serial Io SPI Chip Select Polarity
   Sets polarity for each chip Select. Available options: 0:SerialIoSpiCsActiveLow,
   1:SerialIoSpiCsActiveHigh
 **/
   UINT8                       PcdSerialIoSpiCsPolarity[2];
 
-/** Offset 0x00BA - Serial Io SPI Chip Select Enable
+/** Offset 0x00C2 - Serial Io SPI Chip Select Enable
   0:Disabled, 1:Enabled. Enables GPIO for CS0 or CS1 if it is Enabled
 **/
   UINT8                       PcdSerialIoSpiCsEnable[2];
 
-/** Offset 0x00BC - Serial Io SPI Device Mode
+/** Offset 0x00C4 - Serial Io SPI Device Mode
   When mode is set to Pci, controller is initalized in early stage. Available modes:
   0:SerialIoSpiDisabled, 1:SerialIoSpiPci.
 **/
   UINT8                       PcdSerialIoSpiMode;
 
-/** Offset 0x00BD - Serial Io SPI Default Chip Select Output
+/** Offset 0x00C5 - Serial Io SPI Default Chip Select Output
   Sets Default CS as Output. Available options: 0:CS0, 1:CS1
 **/
   UINT8                       PcdSerialIoSpiDefaultCsOutput;
 
-/** Offset 0x00BE - Serial Io SPI Default Chip Select Mode HW/SW
+/** Offset 0x00C6 - Serial Io SPI Default Chip Select Mode HW/SW
   Sets Default CS Mode Hardware or Software. Available options: 0:HW, 1:SW
 **/
   UINT8                       PcdSerialIoSpiCsMode;
 
-/** Offset 0x00BF - Serial Io SPI Default Chip Select State Low/High
+/** Offset 0x00C7 - Serial Io SPI Default Chip Select State Low/High
   Sets Default CS State Low or High. Available options: 0:Low, 1:High
 **/
   UINT8                       PcdSerialIoSpiCsState;
 
-/** Offset 0x00C0 - Serial Io SPI Device Number
+/** Offset 0x00C8 - Serial Io SPI Device Number
   Select which Serial Io SPI controller is initalized in early stage.
 **/
   UINT8                       PcdSerialIoSpiNumber;
 
-/** Offset 0x00C1
+/** Offset 0x00C9
 **/
-  UINT8                       Rsvd02[3];
+  UINT8                       Rsvd030[3];
 
-/** Offset 0x00C4 - Serial Io SPI Device MMIO Base
+/** Offset 0x00CC - Serial Io SPI Device MMIO Base
   Assigns MMIO for Serial Io SPI controller usage in early stage.
 **/
   UINT32                      PcdSerialIoSpiMmioBase;
 
-/** Offset 0x00C8
+/** Offset 0x00D0 - Serial IO SPI CS Pin Muxing
+  Select SerialIo SPI CS pin muxing. Refer to GPIO_*_MUXING_SERIALIO_SPIx_CS* for
+  possible values.
 **/
-  UINT8                       ReservedFsptUpd1[16];
+  UINT32                      PcdSerialIoSpiCsPinMux[2];
+
+/** Offset 0x00D8 - Serial IO SPI CLK Pin Muxing
+  Select SerialIo SPI CLK pin muxing. Refer to GPIO_*_MUXING_SERIALIO_SPIx_CLK* for
+  possible values.
+**/
+  UINT32                      PcdSerialIoSpiClkPinMux;
+
+/** Offset 0x00DC - Serial IO SPI MISO Pin Muxing
+  Select SerialIo SPI MISO pin muxing. Refer to GPIO_*_MUXING_SERIALIO_SPIx_MISO*
+  for possible values.
+**/
+  UINT32                      PcdSerialIoSpiMisoPinMux;
+
+/** Offset 0x00E0 - Serial IO SPI MOSI Pin Muxing
+  Select SerialIo SPI MOSI pin muxing. Refer to GPIO_*_MUXING_SERIALIO_SPIx_MOSI*
+  for possible values.
+**/
+  UINT32                      PcdSerialIoSpiMosiPinMux;
+
+/** Offset 0x00E4 - Serial Io I2C Device MMIO Base
+  Assigns MMIO for Serial Io I2C controller usage in early stage.
+**/
+  UINT32                      PcdSerialIoI2cMmioBase;
+
+/** Offset 0x00E8 - Serial Io I2C Sda Gpio Pin
+  Select SerialIo I2C Rts pin. Refer to GPIO_*_MUXING_SERIALIO_I2C*_SDA* for possible values.
+**/
+  UINT32                      PcdSerialIoI2cSdaPin;
+
+/** Offset 0x00EC - Serial Io I2C Scl Gpio Pin
+  Select SerialIo I2C Cts pin. Refer to GPIO_*_MUXING_SERIALIO_I2C*_SCL* for possible values.
+**/
+  UINT32                      PcdSerialIoI2cSclPin;
+
+/** Offset 0x00F0 - Serial Io I2C Gpio Pad termination
+  0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+  0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C0,I2C1,... pads termination
+  respectively. One byte for each controller, byte0 for I2C0, byte1 for I2C1, and so on.
+**/
+  UINT8                       PcdSerialIoI2cPadsTerm;
+
+/** Offset 0x00F1 - Serial Io I2c Controller Number
+  Select SerialIo I2C Controller number to be intilizaed during early boot. Default is 0xFF
+  0:SerialIoI2c0, 1:SerialIoI2c1, 2:SerialIoI2c2, 0xFF:Disable
+**/
+  UINT8                       PcdSerialIoI2cNumber;
+
+/** Offset 0x00F2
+**/
+  UINT8                       ReservedFsptUpd1[6];
 } FSP_T_CONFIG;
 
 /** Fsp T UPD Configuration
@@ -343,11 +406,11 @@ typedef struct {
 **/
   FSP_T_CONFIG                FsptConfig;
 
-/** Offset 0x00D8
+/** Offset 0x00F8
 **/
-  UINT8                       Rsvd03[6];
+  UINT8                       Rsvd3[6];
 
-/** Offset 0x00DE
+/** Offset 0x00FE
 **/
   UINT16                      UpdTerminator;
 } FSPT_UPD;

fsp/mtl/4122.12/MeteorLakeFspBinPkg/Include/GpioConfig.h

@@ -230,13 +230,6 @@ typedef enum {
 
 
   GpioResetDefault   = 0x00,        ///< Leave value of pad reset unmodified
-  ///
-  /// Deprecated settings. Maintained only for compatibility.
-  ///
-  GpioResetPwrGood   = 0x09,        ///< GPP: RSMRST; GPD: DSW_PWROK; (PadRstCfg = 00b = "Powergood")
-  GpioResetDeep      = 0x0B,        ///< Deep GPIO Reset (PadRstCfg = 01b = "Deep GPIO Reset")
-  GpioResetNormal    = 0x0D,        ///< GPIO Reset (PadRstCfg = 10b = "GPIO Reset" )
-  GpioResetResume    = 0x0F,        ///< GPP: Reserved; GPD: RSMRST; (PadRstCfg = 11b = "Resume Reset" )
 
   ///
   /// New GPIO reset configuration options

fsp/mtl/4122.12/MeteorLakeFspBinPkg/Include/GpioSampleDef.h

@@ -1,6 +1,6 @@
 /** @file
 
-Copyright (c) 2015 - 2021, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2015 - 2017, Intel Corporation. All rights reserved.<BR>
 
 Redistribution and use in source and binary forms, with or without modification,
 are permitted provided that the following conditions are met:
@@ -209,30 +209,8 @@ are permitted provided that the following conditions are met:
 
 #define END_OF_GPIO_TABLE   0xFFFFFFFF
 
-//
-//AlderLake S GPIO PCIe SLOT RTD3 and PEG reset pins.
-//
-#define GPIO_VER4_S_GPP_E2      0x080E0002
-#define GPIO_VER4_S_GPP_E3      0x080E0003
-#define GPIO_VER4_S_GPP_F11     0x0810000B
-#define GPIO_VER4_S_GPP_F12     0x0810000C
-#define GPIO_VER4_S_GPP_F13     0x0810000D
-
 //Sample GPIO Table
 
-//
-//AlderLake S Gpio table for assert PCIe SLOT RTD3 and PEG reset pins in early PreMem phase.
-//
-static GPIO_INIT_CONFIG mAdlSPcieRstPinGpioTable[] =
-{
-  { GPIO_VER4_S_GPP_E2,   {GpioPadModeGpio,   GpioHostOwnGpio,   GpioDirOut,   GpioOutHigh,   GpioIntDefault,   GpioPlatformReset,   GpioTermNone }},// PEG_1 RTD3 Reset
-  { GPIO_VER4_S_GPP_E3,   {GpioPadModeGpio,   GpioHostOwnGpio,   GpioDirOut,   GpioOutHigh,   GpioIntDefault,   GpioPlatformReset,   GpioTermNone }},// PEG_2 RTD3 Reset Sinai DR0 (Rework)
-  { GPIO_VER4_S_GPP_F11,  {GpioPadModeGpio,   GpioHostOwnGpio,   GpioDirOut,   GpioOutHigh,   GpioIntDefault,   GpioPlatformReset,   GpioTermNone }},// PCIe SLOT_1 RTD3 Reset MIPI60 (Rework)
-  { GPIO_VER4_S_GPP_F12,  {GpioPadModeGpio,   GpioHostOwnGpio,   GpioDirOut,   GpioOutHigh,   GpioIntDefault,   GpioPlatformReset,   GpioTermNone }},// PCIe SLOT_2 RTD3 Reset MIPI60 (Rework)
-  { GPIO_VER4_S_GPP_F13,  {GpioPadModeGpio,   GpioHostOwnGpio,   GpioDirOut,   GpioOutHigh,   GpioIntDefault,   GpioPlatformReset,   GpioTermNone }},// PCIe SLOT_3 RTD3 Reset MIPI60 (Rework)
-  { 0x0 }  // terminator
-};
-
 static GPIO_INIT_CONFIG mGpioTableLpDdr3Rvp3[] =
 {
 //skip for eSPI function  {GPIO_SKL_LP_GPP_A0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone,  GpioOutDefault, GpioIntDis, GpioHostDeepReset,  GpioTermNone}},//H_RCIN_N

fsp/mtl/4122.12/MeteorLakeFspBinPkg/Include/MemInfoHob.h

@@ -5,7 +5,7 @@
 
 @copyright
   INTEL CONFIDENTIAL
-  Copyright 1999 - 2021 Intel Corporation.
+  Copyright 1999 - 2022 Intel Corporation.
 
   The source code contained or described herein and all documents related to the
   source code ("Material") are owned by Intel Corporation or its suppliers or
@@ -41,12 +41,16 @@
 #pragma pack (push, 1)
 
 extern EFI_GUID gSiMemoryS3DataGuid;
+extern EFI_GUID gSiMemoryS3Data2Guid;
 extern EFI_GUID gSiMemoryInfoDataGuid;
 extern EFI_GUID gSiMemoryPlatformDataGuid;
 
 #define MAX_NODE        2
 #define MAX_CH          4
+#define MAX_DDR5_CH     2
 #define MAX_DIMM        2
+// Must match definitions in
+// Intel\ClientOneSiliconPkg\IpBlock\MemoryInit\Mtl\Include\MrcInterface.h
 #define HOB_MAX_SAGV_POINTS 4
 
 ///
@@ -163,11 +167,19 @@ typedef enum {
 #define MRC_DDR_TYPE_UNKNOWN  4
 #endif
 
-#define MAX_PROFILE_NUM     7 // number of memory profiles supported
+#define MAX_PROFILE_NUM       7 // number of memory profiles supported
-#define MAX_XMP_PROFILE_NUM 5 // number of XMP profiles supported
+#define MAX_XMP_PROFILE_NUM   5 // number of XMP profiles supported
 
-#define MAX_TRACE_REGION             5
+#ifndef MAX_RCOMP_TARGETS
-#define MAX_TRACE_CACHE_TYPE         2
+#define MAX_RCOMP_TARGETS     5
+#endif
+
+#ifndef MAX_ODT_ENTRIES
+#define MAX_ODT_ENTRIES       11
+#endif
+
+#define MAX_TRACE_REGION              5
+#define MAX_TRACE_CACHE_TYPE          2
 
 //
 // DIMM timings
@@ -180,7 +192,7 @@ typedef struct {
   UINT16 tFAW;      ///< Number of tCK cycles for the channel DIMM's minimum four activate window delay time.
   UINT16 tRAS;      ///< Number of tCK cycles for the channel DIMM's minimum active to precharge delay time.
   UINT16 tRCDtRP;   ///< Number of tCK cycles for the channel DIMM's minimum RAS# to CAS# delay time and Row Precharge delay time.
-  UINT16 tREFI;     ///< Number of tCK cycles for the channel DIMM's minimum Average Periodic Refresh Interval.
+  UINT32 tREFI;     ///< Number of tCK cycles for the channel DIMM's minimum Average Periodic Refresh Interval.
   UINT16 tRFC;      ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time.
   UINT16 tRFCpb;    ///< Number of tCK cycles for the channel DIMM's minimum per bank refresh recovery delay time.
   UINT16 tRFC2;     ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time.
@@ -194,7 +206,9 @@ typedef struct {
   UINT16 tWTR;      ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time.
   UINT16 tWTR_L;    ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for same bank groups.
   UINT16 tWTR_S;    ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for different bank groups.
-  UINT16 tCCD_L;  ///< Number of tCK cycles for the channel DIMM's minimum CAS-to-CAS delay for same bank group.
+  UINT16 tCCD_L;    ///< Number of tCK cycles for the channel DIMM's minimum CAS-to-CAS delay for same bank group.
+  UINT16 tCCD_L_WR; ///< Number of tCK cycles for the channel DIMM's minimum Write-to-Write delay for same bank group.
+  UINT8  Resv[2];   ///< Resv
 } MRC_CH_TIMING;
 
 typedef struct {
@@ -209,7 +223,7 @@ typedef struct {
   UINT8            DimmId;
   UINT32           DimmCapacity;            ///< DIMM size in MBytes.
   UINT16           MfgId;
-  UINT8            ModulePartNum[20];       ///< Module part number for DDR3 is 18 bytes however for DRR4 20 bytes as per JEDEC Spec, so reserving 20 bytes
+  UINT8            ModulePartNum[20];       ///< Module part number for DDR3 is 18 bytes however for DDR4 20 bytes as per JEDEC Spec, so reserving 20 bytes
   UINT8            RankInDimm;              ///< The number of ranks in this DIMM.
   UINT8            SpdDramDeviceType;       ///< Save SPD DramDeviceType information needed for SMBIOS structure creation.
   UINT8            SpdModuleType;           ///< Save SPD ModuleType information needed for SMBIOS structure creation.
@@ -274,32 +288,26 @@ typedef struct {
   SiMrcVersion      Version;
   BOOLEAN           EccSupport;
   UINT8             MemoryProfile;
-  UINT8             IsDMBRunning;                      ///< Deprecated.
   UINT32            TotalPhysicalMemorySize;
   UINT32            DefaultXmptCK[MAX_XMP_PROFILE_NUM];///< Stores the tCK value read from SPD XMP profiles if they exist.
-  ///
+  UINT8             XmpProfileEnable;                  ///< If XMP capable DIMMs are detected, this will indicate which XMP Profiles are common among all DIMMs.
-  /// Set of bit flags showing XMP and User Profile capability status for the DIMMs detected in system. For each bit, 1 is supported, 0 is unsupported.
-  /// Bit 0: XMP Profile 1 capability status
-  /// Bit 1: XMP Profile 2 capability status
-  /// Bit 2: XMP Profile 3 capability status
-  /// Bit 3: User Profile 4 capability status
-  /// Bit 4: User Profile 5 capability status
-  ///
-  UINT8             XmpProfileEnable;
   UINT8             XmpConfigWarning;                  ///< If XMP capable DIMMs config support only 1DPC, but 2DPC is installed
-  UINT8             Ratio;                             ///< DDR Frequency Ratio, Max Value 255
+  BOOLEAN           DynamicMemoryBoostTrainingFailed;  ///< TRUE if Dynamic Memory Boost failed to train and was force disabled on the last full training boot. FALSE otherwise.
+  UINT16            Ratio;                             ///< DDR Frequency Ratio, used for programs that require ratios higher then 255
   UINT8             RefClk;
   UINT32            VddVoltage[MAX_PROFILE_NUM];
   UINT32            VddqVoltage[MAX_PROFILE_NUM];
   UINT32            VppVoltage[MAX_PROFILE_NUM];
+  UINT16            RcompTarget[MAX_PROFILE_NUM][MAX_RCOMP_TARGETS];
+  UINT16            DimmOdt[MAX_PROFILE_NUM][MAX_DIMM][MAX_ODT_ENTRIES];
   CONTROLLER_INFO   Controller[MAX_NODE];
-  UINT16            Ratio_UINT16;                      ///< DDR Frequency Ratio, used for programs that require ratios higher then 255
   UINT32            NumPopulatedChannels;              ///< Total number of memory channels populated
   HOB_SAGV_INFO     SagvConfigInfo;                    ///< This data structure contains SAGV config values that are considered output by the MRC.
+  BOOLEAN           IsIbeccEnabled;
   UINT16            TotalMemWidth;                     ///< Total Memory Width in bits from all populated channels
-  BOOLEAN           MemorySpeedReducedWrongDimmSlot;   ///< Can be used by OEM BIOS to display a warning on the screen that DDR speed was reduced due to wrong DIMM population
+  UINT16            PprDetectedErrors;                 ///< PPR: Counts of detected bad rows
-  BOOLEAN           MemorySpeedReducedMixedConfig;     ///< Can be used by OEM BIOS to display a warning on the screen that DDR speed was reduced due to mixed DIMM config
+  UINT16            PprRepairFails;                    ///< PPR: Counts of repair failure
-  BOOLEAN           DynamicMemoryBoostTrainingFailed;  ///< TRUE if Dynamic Memory Boost failed to train and was force disabled on the last full training boot. FALSE otherwise.
+  UINT16            PprForceRepairStatus;              ///< PPR: Force Repair Status
 } MEMORY_INFO_DATA_HOB;
 
 /**

fsp/mtl/4122.12/MeteorLakeFspBinPkg/Library/FspPcdListLib/FspPcdListLibNull.inf

@@ -65,21 +65,22 @@
   # FSP Dispatch mode bootloader will include this INF to ensure all the PCDs are
   # built into PCD database.
   #
-  gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr     ## CONSUMES
+  gUefiCpuPkgTokenSpaceGuid.PcdCpuMaxLogicalProcessorNumber            ## CONSUMES
-  gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr  ## CONSUMES
+  gSiPkgTokenSpaceGuid.PcdSiPciExpressBaseAddress                      ## CONSUMES
-  gEfiMdeModulePkgTokenSpaceGuid.PcdGhcbBase                            ## CONSUMES
+  gSiPkgTokenSpaceGuid.PcdPciExpressRegionLength                       ## CONSUMES
-  gEfiMdeModulePkgTokenSpaceGuid.PcdGhcbSize                            ## CONSUMES
+  gUefiCpuPkgTokenSpaceGuid.PcdCpuMicrocodePatchAddress                ## CONSUMES
-  gUefiCpuPkgTokenSpaceGuid.PcdCpuMaxLogicalProcessorNumber             ## CONSUMES
+  gUefiCpuPkgTokenSpaceGuid.PcdCpuMicrocodePatchRegionSize             ## CONSUMES
-  gSiPkgTokenSpaceGuid.PcdSiPciExpressBaseAddress                       ## CONSUMES
+  gUefiCpuPkgTokenSpaceGuid.PcdCpuApLoopMode                           ## CONSUMES
-  gSiPkgTokenSpaceGuid.PcdPciExpressRegionLength                        ## CONSUMES
+  gUefiCpuPkgTokenSpaceGuid.PcdCpuApTargetCstate                       ## CONSUMES
-  gUefiCpuPkgTokenSpaceGuid.PcdCpuMicrocodePatchAddress                 ## CONSUMES
+  gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiS3Enable                       ## CONSUMES
-  gUefiCpuPkgTokenSpaceGuid.PcdCpuMicrocodePatchRegionSize              ## CONSUMES
+  gUefiCpuPkgTokenSpaceGuid.PcdCpuS3DataAddress                        ## CONSUMES
-  gUefiCpuPkgTokenSpaceGuid.PcdCpuApLoopMode                            ## CONSUMES
+  gUefiCpuPkgTokenSpaceGuid.PcdCpuFeaturesSetting                      ## CONSUMES
-  gUefiCpuPkgTokenSpaceGuid.PcdCpuApTargetCstate                        ## CONSUMES
+  gUefiCpuPkgTokenSpaceGuid.PcdCpuProcTraceMemSize                     ## CONSUMES
-  gUefiCpuPkgTokenSpaceGuid.PcdSevEsIsEnabled                           ## CONSUMES
+  gUefiCpuPkgTokenSpaceGuid.PcdCpuProcTraceOutputScheme                ## CONSUMES
-  gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiS3Enable                        ## CONSUMES
+  gUefiCpuPkgTokenSpaceGuid.PcdCpuFeaturesCapability                   ## CONSUMES
-  gUefiCpuPkgTokenSpaceGuid.PcdCpuS3DataAddress                         ## CONSUMES
+  gEfiMdeModulePkgTokenSpaceGuid.PcdGhcbBase                           ## CONSUMES
-  gUefiCpuPkgTokenSpaceGuid.PcdCpuFeaturesSetting                       ## CONSUMES
+  gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr    ## CONSUMES
-  gUefiCpuPkgTokenSpaceGuid.PcdCpuProcTraceMemSize                      ## CONSUMES
+  gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr ## CONSUMES
-  gUefiCpuPkgTokenSpaceGuid.PcdCpuProcTraceOutputScheme                 ## CONSUMES
+  gEfiMdeModulePkgTokenSpaceGuid.PcdGhcbSize                           ## CONSUMES
-  gUefiCpuPkgTokenSpaceGuid.PcdCpuFeaturesCapability                    ## CONSUMES
+  gUefiCpuPkgTokenSpaceGuid.PcdSevEsIsEnabled                          ## CONSUMES
+

fsp/mtl/4122.12/MeteorLakeFspBinPkg/MeteorLakeFspBinPkg.dec

@@ -1,5 +1,5 @@
 ## @file
-#  Component description file for AlderLake Fsp Bin package.
+#  Component description file for MeteorLake Fsp Bin package.
 #
 # @copyright
 #  INTEL CONFIDENTIAL
@@ -35,7 +35,7 @@
 
 [Defines]
   DEC_SPECIFICATION              = 0x00010005
-  PACKAGE_NAME                   = AlderLakeFspBinPkg
+  PACKAGE_NAME                   = MeteorLakeFspBinPkg
   PACKAGE_GUID                   = 5A536013-A46E-44AD-8B30-738235F77B06
   PACKAGE_VERSION                = 1.02
 

models/README.md

@@ -5,8 +5,12 @@
 - [addw1](./addw1) - System76 Adder Workstation (addw1)
 - [addw2](./addw2) - System76 Adder WS (addw2)
 - [addw3](./addw3) - System76 Adder WS (addw3)
+- [addw4](./addw4) - System76 Adder WS (addw4)
 - [bonw14](./bonw14) - System76 Bonobo WS (bonw14)
 - [bonw15](./bonw15) - System76 Bonobo WS (bonw15)
+- [bonw15-b](./bonw15-b) - System76 Bonobo WS (bonw15-b)
+- [darp10](./darp10) - System76 Darter Pro (darp10)
+- [darp10-b](./darp10-b) - System76 Darter Pro (darp10-b)
 - [darp5](./darp5) - System76 Darter Pro (darp5)
 - [darp6](./darp6) - System76 Darter Pro (darp6)
 - [darp7](./darp7) - System76 Darter Pro (darp7)
@@ -32,9 +36,12 @@
 - [lemp10](./lemp10) - System76 Lemur Pro (lemp10)
 - [lemp11](./lemp11) - System76 Lemur Pro (lemp11)
 - [lemp12](./lemp12) - System76 Lemur Pro (lemp12)
+- [lemp13](./lemp13) - System76 Lemur Pro (lemp13)
+- [lemp13-b](./lemp13-b) - System76 Lemur Pro (lemp13-b)
 - [lemp9](./lemp9) - System76 Lemur Pro (lemp9)
 - [oryp10](./oryp10) - System76 Oryx Pro (oryp10)
 - [oryp11](./oryp11) - System76 Oryx Pro (oryp11)
+- [oryp12](./oryp12) - System76 Oryx Pro (oryp12)
 - [oryp5](./oryp5) - System76 Oryx Pro (oryp5)
 - [oryp6](./oryp6) - System76 Oryx Pro (oryp6)
 - [oryp7](./oryp7) - System76 Oryx Pro (oryp7)

models/addw1/README.md

@@ -11,4 +11,4 @@ https://system76.com/guides/addw1
   - HAP: false
 - [ME](./me.rom)
   - Size: 6140 KB
-  - Version: 12.0.85.1919
+  - Version: 12.0.94.2428

models/addw1/edk2.config

@@ -7,7 +7,3 @@ SERIAL_DRIVER_ENABLE=FALSE
 SHELL_TYPE=NONE
 TPM_ENABLE=TRUE
 #SYSTEM76_EC_LOGGING=TRUE
-
-# FMP UUIDs for ESRT
-SYSTEM_FMP_UUID=230b1cbc-6df5-437a-a364-b61f9fa6a4f6
-EC_FMP_UUID=45a6839a-1666-40e3-8e90-103de469f025

models/addw1/gpio.h

@@ -1,245 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#ifndef MAINBOARD_GPIO_H
-#define MAINBOARD_GPIO_H
-
-#include <soc/gpe.h>
-#include <soc/gpio.h>
-
-#ifndef __ACPI__
-
-/* Pad configuration in ramstage. */
-static const struct pad_config gpio_table[] = {
-		PAD_CFG_NF(GPD0, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPD1, NATIVE, DEEP, NF1),
-		PAD_CFG_GPI(GPD2, NATIVE, PWROK),
-		PAD_CFG_NF(GPD3, UP_20K, DEEP, NF1),
-		PAD_CFG_NF(GPD4, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPD5, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPD6, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPD7, NONE, PWROK),
-		PAD_CFG_NF(GPD8, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPD9, NONE, PWROK, NF1),
-		_PAD_CFG_STRUCT(GPD10, 0x04000601, 0x0000),
-		PAD_CFG_NF(GPD11, NONE, DEEP, NF1),
-		PAD_CFG_TERM_GPO(GPP_A0, 0, NONE, DEEP),
-		PAD_CFG_NF(GPP_A1, NATIVE, DEEP, NF1),
-		PAD_CFG_NF(GPP_A2, NATIVE, DEEP, NF1),
-		PAD_CFG_NF(GPP_A3, NATIVE, DEEP, NF1),
-		PAD_CFG_NF(GPP_A4, NATIVE, DEEP, NF1),
-		PAD_CFG_NF(GPP_A5, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_A6, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPP_A7, NONE, DEEP),
-		PAD_CFG_NF(GPP_A8, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_A9, DN_20K, DEEP, NF1),
-		PAD_CFG_NF(GPP_A10, DN_20K, DEEP, NF1),
-		PAD_CFG_GPI(GPP_A11, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_A12, NONE, DEEP),
-		PAD_CFG_NF(GPP_A13, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_A14, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_A15, UP_20K, DEEP, NF1),
-		PAD_CFG_GPI(GPP_A16, DN_20K, DEEP),
-		PAD_CFG_GPI(GPP_A17, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_A18, 1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_A19, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_A20, 1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_A21, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_A22, 0, NONE, DEEP),
-		PAD_CFG_GPI(GPP_A23, NONE, DEEP),
-		PAD_CFG_GPI(GPP_B0, NONE, DEEP),
-		PAD_CFG_GPI(GPP_B1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_B2, NONE, DEEP),
-		_PAD_CFG_STRUCT(GPP_B3, 0x80100100, 0x0000),
-		PAD_CFG_GPI(GPP_B4, NONE, DEEP),
-		PAD_CFG_NF(GPP_B5, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPP_B6, NONE, DEEP),
-		PAD_CFG_GPI(GPP_B7, NONE, DEEP),
-		PAD_CFG_GPI(GPP_B8, NONE, DEEP),
-		PAD_CFG_GPI(GPP_B9, NONE, DEEP),
-		PAD_CFG_NF(GPP_B10, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPP_B11, NONE, DEEP),
-		PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1),
-		_PAD_CFG_STRUCT(GPP_B13, 0x44000601, 0x0000),
-		PAD_CFG_NF(GPP_B14, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPP_B15, NONE, DEEP),
-		PAD_CFG_GPI(GPP_B16, NONE, DEEP),
-		PAD_CFG_GPI(GPP_B17, NONE, DEEP),
-		PAD_CFG_GPI(GPP_B18, NONE, DEEP),
-		PAD_CFG_GPI(GPP_B19, NONE, DEEP),
-		PAD_CFG_GPI(GPP_B20, NONE, DEEP),
-		PAD_CFG_GPI(GPP_B21, NONE, DEEP),
-		PAD_CFG_GPI(GPP_B22, NONE, DEEP),
-		PAD_CFG_GPI(GPP_B23, NONE, DEEP),
-		PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1),
-		_PAD_CFG_STRUCT(GPP_C2, 0x40880100, 0x0000),
-		PAD_CFG_GPI(GPP_C3, NONE, DEEP),
-		PAD_CFG_GPI(GPP_C4, NONE, DEEP),
-		PAD_CFG_GPI(GPP_C5, NONE, DEEP),
-		PAD_CFG_GPI(GPP_C6, NONE, DEEP),
-		PAD_CFG_GPI(GPP_C7, NONE, DEEP),
-		PAD_CFG_GPI(GPP_C8, NONE, DEEP),
-		PAD_CFG_GPI(GPP_C9, NONE, DEEP),
-		PAD_CFG_GPI(GPP_C10, NONE, DEEP),
-		PAD_CFG_GPI(GPP_C11, NONE, DEEP),
-		PAD_CFG_GPI(GPP_C12, NONE, DEEP),
-		PAD_CFG_GPI(GPP_C13, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_C14, 1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_C15, NONE, DEEP),
-		PAD_CFG_NF(GPP_C16, NONE, PLTRST, NF1),
-		PAD_CFG_NF(GPP_C17, NONE, PLTRST, NF1),
-		PAD_CFG_NF(GPP_C18, NONE, PLTRST, NF1),
-		PAD_CFG_NF(GPP_C19, NONE, PLTRST, NF1),
-		PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_C22, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_C23, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPP_D0, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D2, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D3, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D4, NONE, DEEP),
-		PAD_CFG_NF(GPP_D5, NONE, DEEP, NF3),
-		PAD_CFG_NF(GPP_D6, NONE, DEEP, NF3),
-		PAD_CFG_GPI(GPP_D7, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D8, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D9, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D10, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D11, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D12, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D13, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D14, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D15, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D16, NONE, DEEP),
-		PAD_CFG_NF(GPP_D17, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_D18, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_D19, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_D20, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPP_D21, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D22, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D23, NONE, DEEP),
-		PAD_CFG_GPI(GPP_E0, NONE, DEEP),
-		PAD_CFG_NF(GPP_E1, UP_20K, DEEP, NF1),
-		PAD_CFG_GPI(GPP_E2, NONE, DEEP),
-		PAD_CFG_GPI(GPP_E3, NONE, DEEP),
-		PAD_CFG_GPI(GPP_E4, NONE, DEEP),
-		PAD_CFG_NF(GPP_E5, NONE, DEEP, NF1),
-		PAD_CFG_TERM_GPO(GPP_E6, 1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_E7, NONE, DEEP),
-		PAD_CFG_NF(GPP_E8, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPP_E9, NONE, DEEP),
-		PAD_CFG_GPI(GPP_E10, NONE, DEEP),
-		PAD_CFG_GPI(GPP_E11, NONE, DEEP),
-		PAD_CFG_GPI(GPP_E12, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F0, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F2, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_F3, 1, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_F4, 1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F5, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F6, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F7, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F8, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_F9, 0, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F10, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F11, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F12, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F13, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F14, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F15, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F16, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F17, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F18, NONE, DEEP),
-		PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_F20, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_F21, NONE, DEEP, NF1),
-		PAD_CFG_TERM_GPO(GPP_F22, 0, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_F23, 1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_G0, NONE, DEEP),
-		PAD_CFG_GPI(GPP_G1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_G2, NONE, DEEP),
-		PAD_CFG_GPI(GPP_G3, NONE, DEEP),
-		PAD_CFG_GPI(GPP_G4, NONE, DEEP),
-		PAD_CFG_GPI(GPP_G5, NONE, DEEP),
-		PAD_CFG_GPI(GPP_G6, NONE, DEEP),
-		PAD_CFG_GPI(GPP_G7, NONE, DEEP),
-		PAD_CFG_NF(GPP_H0, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_H1, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_H2, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_H3, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPP_H5, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_H6, 1, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_H7, 1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_H8, NONE, DEEP),
-		PAD_CFG_GPI(GPP_H9, NONE, DEEP),
-		PAD_CFG_GPI(GPP_H10, NONE, DEEP),
-		PAD_CFG_GPI(GPP_H11, NONE, DEEP),
-		PAD_CFG_GPI(GPP_H12, NONE, DEEP),
-		PAD_CFG_GPI(GPP_H13, NONE, DEEP),
-		PAD_CFG_GPI(GPP_H14, NONE, DEEP),
-		PAD_CFG_GPI(GPP_H15, NONE, DEEP),
-		_PAD_CFG_STRUCT(GPP_H16, 0x44000101, 0x0000),
-		PAD_CFG_TERM_GPO(GPP_H17, 0, NONE, PLTRST),
-		PAD_CFG_TERM_GPO(GPP_H18, 1, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_H19, 1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_H20, NONE, DEEP),
-		PAD_CFG_GPI(GPP_H21, NONE, DEEP),
-		PAD_CFG_GPI(GPP_H22, NONE, DEEP),
-		_PAD_CFG_STRUCT(GPP_H23, 0x82880100, 0x0000),
-		_PAD_CFG_STRUCT(GPP_I0, 0x46080100, 0x0000),
-		_PAD_CFG_STRUCT(GPP_I1, 0x46080100, 0x0000),
-		_PAD_CFG_STRUCT(GPP_I2, 0x46080100, 0x0000),
-		_PAD_CFG_STRUCT(GPP_I3, 0x46080100, 0x0000),
-		PAD_CFG_NF(GPP_I4, NONE, DEEP, NF1),
-		PAD_CFG_TERM_GPO(GPP_I5, 1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_I6, NONE, DEEP),
-		PAD_CFG_GPI(GPP_I7, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_I8, 1, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_I9, 1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_I10, NONE, DEEP),
-		PAD_CFG_GPI(GPP_I11, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_I12, 1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_I13, NONE, DEEP),
-		PAD_CFG_GPI(GPP_I14, NONE, DEEP),
-		PAD_CFG_NF(GPP_J0, NONE, DEEP, NF1),
-		PAD_CFG_TERM_GPO(GPP_J1, 1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_J2, NONE, DEEP),
-		PAD_CFG_GPI(GPP_J3, NONE, DEEP),
-		PAD_CFG_NF(GPP_J4, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_J5, UP_20K, DEEP, NF1),
-		PAD_CFG_NF(GPP_J6, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_J7, UP_20K, DEEP, NF1),
-		PAD_CFG_NF(GPP_J8, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_J9, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPP_J10, NONE, DEEP),
-		PAD_CFG_GPI(GPP_J11, DN_20K, DEEP),
-		PAD_CFG_TERM_GPO(GPP_K0, 0, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_K1, 0, NONE, DEEP),
-		PAD_CFG_GPI(GPP_K2, NONE, DEEP),
-		_PAD_CFG_STRUCT(GPP_K3, 0x40880100, 0x0000),
-		PAD_CFG_GPI(GPP_K4, NONE, DEEP),
-		PAD_CFG_GPI(GPP_K5, NONE, DEEP),
-		_PAD_CFG_STRUCT(GPP_K6, 0x40880100, 0x0000),
-		PAD_CFG_GPI(GPP_K7, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_K8, 1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_K9, NONE, DEEP),
-		PAD_CFG_GPI(GPP_K10, NONE, DEEP),
-		PAD_CFG_GPI(GPP_K11, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_K12, 1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_K13, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_K14, 0, NONE, DEEP),
-		_PAD_CFG_STRUCT(GPP_K15, 0x80100100, 0x0000),
-		PAD_CFG_GPI(GPP_K16, NONE, DEEP),
-		PAD_CFG_GPI(GPP_K17, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_K18, 1, NONE, DEEP),
-		_PAD_CFG_STRUCT(GPP_K19, 0x42800101, 0x0000),
-		PAD_CFG_GPI(GPP_K20, NONE, DEEP),
-		PAD_CFG_GPI(GPP_K21, NONE, DEEP),
-		_PAD_CFG_STRUCT(GPP_K22, 0x44000101, 0x0000),
-		PAD_CFG_GPI(GPP_K23, NONE, DEEP),
-};
-
-#endif
-
-#endif

models/addw1/hda_verb.c

@@ -1,43 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#include <device/azalia_device.h>
-
-const u32 cim_verb_data[] = {
-	/* Realtek, ALC1220 */
-	0x10ec1220, /* Vendor ID */
-	0x155865d1, /* Subsystem ID */
-	12, /* Number of entries */
-	AZALIA_SUBVENDOR(0, 0x155865d1),
-	AZALIA_PIN_CFG(0, 0x12, 0x90a60130),
-	AZALIA_PIN_CFG(0, 0x14, 0x0421101f),
-	AZALIA_PIN_CFG(0, 0x15, 0x40000000),
-	AZALIA_PIN_CFG(0, 0x16, 0x411111f0),
-	AZALIA_PIN_CFG(0, 0x17, 0x411111f0),
-	AZALIA_PIN_CFG(0, 0x18, 0x04a11040),
-	AZALIA_PIN_CFG(0, 0x19, 0x411111f0),
-	AZALIA_PIN_CFG(0, 0x1a, 0x411111f0),
-	AZALIA_PIN_CFG(0, 0x1b, 0x90170110),
-	AZALIA_PIN_CFG(0, 0x1d, 0x40b7952d),
-	AZALIA_PIN_CFG(0, 0x1e, 0x04451150),
-	/* Intel, KabylakeHDMI */
-	0x8086280b, /* Vendor ID */
-	0x80860101, /* Subsystem ID */
-	4, /* Number of entries */
-	AZALIA_SUBVENDOR(2, 0x80860101),
-	AZALIA_PIN_CFG(2, 0x05, 0x18560010),
-	AZALIA_PIN_CFG(2, 0x06, 0x18560010),
-	AZALIA_PIN_CFG(2, 0x07, 0x18560010),
-	/* Nvidia, GPU93HDMI/DP */
-	0x10de0093, /* Vendor ID */
-	0x155865d1, /* Subsystem ID */
-	5, /* Number of entries */
-	AZALIA_SUBVENDOR(0, 0x155865d1),
-	AZALIA_PIN_CFG(0, 0x04, 0x185600f0),
-	AZALIA_PIN_CFG(0, 0x05, 0x185600f0),
-	AZALIA_PIN_CFG(0, 0x06, 0x185600f0),
-	AZALIA_PIN_CFG(0, 0x07, 0x185600f0),
-};
-
-const u32 pc_beep_verbs[] = {};
-
-AZALIA_ARRAY_SIZES;

models/addw2/README.md

@@ -11,4 +11,4 @@ https://system76.com/guides/addw2
   - HAP: false
 - [ME](./me.rom)
   - Size: 4092 KB
-  - Version: 14.0.60.1807
+  - Version: 14.1.72.2287

models/addw2/edk2.config

@@ -7,7 +7,3 @@ SERIAL_DRIVER_ENABLE=FALSE
 SHELL_TYPE=NONE
 TPM_ENABLE=TRUE
 #SYSTEM76_EC_LOGGING=TRUE
-
-# FMP UUIDs for ESRT
-SYSTEM_FMP_UUID=baaca94e-b8e8-4357-acb9-35819eeba12b
-EC_FMP_UUID=3e21b09a-c90c-43b7-a9e9-07704264d44a

models/addw2/gpio.h

@@ -1,258 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2019 System76
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
- * GNU General Public License for more details.
- */
-
-#ifndef MAINBOARD_GPIO_H
-#define MAINBOARD_GPIO_H
-
-#include <soc/gpe.h>
-#include <soc/gpio.h>
-
-#ifndef __ACPI__
-
-/* Pad configuration in ramstage. */
-static const struct pad_config gpio_table[] = {
-		PAD_CFG_NF(GPD0, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPD1, NATIVE, DEEP, NF1),
-		PAD_CFG_GPI(GPD2, NATIVE, PWROK),
-		PAD_CFG_NF(GPD3, UP_20K, DEEP, NF1),
-		PAD_CFG_NF(GPD4, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPD5, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPD6, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPD7, NONE, PWROK),
-		PAD_CFG_NF(GPD8, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPD9, NONE, PWROK, NF1),
-		_PAD_CFG_STRUCT(GPD10, 0x04000601, 0x0000),
-		PAD_CFG_NF(GPD11, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPP_A0, NONE, DEEP),
-		PAD_CFG_NF(GPP_A1, NATIVE, DEEP, NF1),
-		PAD_CFG_NF(GPP_A2, NATIVE, DEEP, NF1),
-		PAD_CFG_NF(GPP_A3, NATIVE, DEEP, NF1),
-		PAD_CFG_NF(GPP_A4, NATIVE, DEEP, NF1),
-		PAD_CFG_NF(GPP_A5, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_A6, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPP_A7, NONE, DEEP),
-		PAD_CFG_NF(GPP_A8, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_A9, DN_20K, DEEP, NF1),
-		PAD_CFG_NF(GPP_A10, DN_20K, DEEP, NF1),
-		PAD_CFG_GPI(GPP_A11, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_A12, NONE, DEEP),
-		PAD_CFG_NF(GPP_A13, NONE, DEEP, NF1),
-		_PAD_CFG_STRUCT(GPP_A14, 0x80800100, 0x0000),
-		PAD_CFG_NF(GPP_A15, UP_20K, DEEP, NF1),
-		PAD_CFG_GPI(GPP_A16, DN_20K, DEEP),
-		PAD_CFG_GPI(GPP_A17, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_A18, 1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_A19, NONE, DEEP),
-		PAD_CFG_GPI(GPP_A20, NONE, DEEP),
-		_PAD_CFG_STRUCT(GPP_A21, 0x46080100, 0x0000),
-		PAD_CFG_TERM_GPO(GPP_A22, 0, NONE, DEEP),
-		PAD_CFG_GPI(GPP_A23, NONE, DEEP),
-		_PAD_CFG_STRUCT(GPP_B0, 0x42080100, 0x3000),
-		PAD_CFG_GPI(GPP_B1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_B2, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_B3, 1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_B4, NONE, DEEP),
-		PAD_CFG_NF(GPP_B5, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPP_B6, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_B7, 0, NONE, DEEP),
-		PAD_CFG_GPI(GPP_B8, NONE, DEEP),
-		PAD_CFG_GPI(GPP_B9, NONE, DEEP),
-		PAD_CFG_NF(GPP_B10, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPP_B11, NONE, DEEP),
-		PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1),
-		_PAD_CFG_STRUCT(GPP_B13, 0x44000601, 0x0000),
-		PAD_CFG_NF(GPP_B14, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPP_B15, NONE, DEEP),
-		PAD_CFG_GPI(GPP_B16, NONE, DEEP),
-		PAD_CFG_GPI(GPP_B17, NONE, DEEP),
-		PAD_CFG_GPI(GPP_B18, NONE, DEEP),
-		PAD_CFG_GPI(GPP_B19, NONE, DEEP),
-		_PAD_CFG_STRUCT(GPP_B20, 0x42840101, 0x0000),
-		PAD_CFG_GPI(GPP_B21, NONE, DEEP),
-		PAD_CFG_GPI(GPP_B22, NONE, DEEP),
-		PAD_CFG_GPI(GPP_B23, NONE, DEEP),
-		PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPP_C2, NONE, DEEP),
-		PAD_CFG_GPI(GPP_C3, NONE, DEEP),
-		PAD_CFG_GPI(GPP_C4, NONE, DEEP),
-		PAD_CFG_GPI(GPP_C5, NONE, DEEP),
-		PAD_CFG_GPI(GPP_C6, NONE, DEEP),
-		PAD_CFG_GPI(GPP_C7, NONE, DEEP),
-		PAD_CFG_GPI(GPP_C8, NONE, DEEP),
-		PAD_CFG_GPI(GPP_C9, NONE, DEEP),
-		PAD_CFG_GPI(GPP_C10, NONE, DEEP),
-		PAD_CFG_GPI(GPP_C11, NONE, DEEP),
-		PAD_CFG_GPI(GPP_C12, NONE, DEEP),
-		PAD_CFG_GPI(GPP_C13, NONE, PLTRST),
-		PAD_CFG_TERM_GPO(GPP_C14, 1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_C15, NONE, DEEP),
-		PAD_CFG_NF(GPP_C16, NONE, PLTRST, NF1),
-		PAD_CFG_NF(GPP_C17, NONE, PLTRST, NF1),
-		PAD_CFG_NF(GPP_C18, NONE, PLTRST, NF1),
-		PAD_CFG_NF(GPP_C19, NONE, PLTRST, NF1),
-		PAD_CFG_GPI(GPP_C20, NONE, DEEP),
-		PAD_CFG_GPI(GPP_C21, NONE, DEEP),
-		PAD_CFG_GPI(GPP_C22, NONE, DEEP),
-		PAD_CFG_GPI(GPP_C23, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D0, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D2, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D3, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D4, NONE, DEEP),
-		PAD_CFG_NF(GPP_D5, NONE, DEEP, NF3),
-		PAD_CFG_NF(GPP_D6, NONE, DEEP, NF3),
-		PAD_CFG_GPI(GPP_D7, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D8, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D9, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D10, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D11, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D12, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D13, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D14, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D15, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D16, NONE, DEEP),
-		PAD_CFG_NF(GPP_D17, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_D18, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_D19, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_D20, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPP_D21, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D22, NONE, DEEP),
-		PAD_CFG_GPI(GPP_D23, NONE, DEEP),
-		PAD_CFG_GPI(GPP_E0, NONE, DEEP),
-		PAD_CFG_NF(GPP_E1, UP_20K, DEEP, NF1),
-		PAD_CFG_GPI(GPP_E2, NONE, DEEP),
-		PAD_CFG_GPI(GPP_E3, NONE, DEEP),
-		PAD_CFG_GPI(GPP_E4, NONE, DEEP),
-		PAD_CFG_NF(GPP_E5, NONE, DEEP, NF1),
-		PAD_CFG_TERM_GPO(GPP_E6, 1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_E7, NONE, DEEP),
-		PAD_CFG_NF(GPP_E8, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPP_E9, NONE, DEEP),
-		PAD_CFG_GPI(GPP_E10, NONE, DEEP),
-		PAD_CFG_GPI(GPP_E11, NONE, DEEP),
-		PAD_CFG_GPI(GPP_E12, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F0, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F2, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_F3, 0, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F4, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F5, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F6, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F7, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F8, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_F9, 0, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F10, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F11, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F12, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F13, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F14, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F15, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F16, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F17, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F18, NONE, DEEP),
-		PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_F20, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_F21, NONE, DEEP, NF1),
-		PAD_CFG_TERM_GPO(GPP_F22, 1, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_F23, 1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_G0, NONE, DEEP),
-		PAD_CFG_GPI(GPP_G1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_G2, NONE, DEEP),
-		PAD_CFG_GPI(GPP_G3, NONE, DEEP),
-		PAD_CFG_GPI(GPP_G4, NONE, DEEP),
-		PAD_CFG_GPI(GPP_G5, NONE, DEEP),
-		PAD_CFG_GPI(GPP_G6, NONE, DEEP),
-		PAD_CFG_GPI(GPP_G7, NONE, DEEP),
-		PAD_CFG_NF(GPP_H0, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_H1, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_H2, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_H3, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPP_H4, NONE, DEEP),
-		PAD_CFG_GPI(GPP_H5, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_H6, 1, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_H7, 1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_H8, NONE, DEEP),
-		_PAD_CFG_STRUCT(GPP_H9, 0x40880100, 0x0000),
-		PAD_CFG_GPI(GPP_H10, NONE, DEEP),
-		PAD_CFG_GPI(GPP_H11, NONE, DEEP),
-		PAD_CFG_GPI(GPP_H12, NONE, DEEP),
-		PAD_CFG_GPI(GPP_H13, NONE, DEEP),
-		PAD_CFG_GPI(GPP_H14, NONE, DEEP),
-		PAD_CFG_GPI(GPP_H15, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_H16, 0, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_H17, 0, NONE, PLTRST),
-		PAD_CFG_GPI(GPP_H18, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_H19, 0, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_H20, 0, NONE, DEEP),
-		PAD_CFG_GPI(GPP_H21, NONE, DEEP),
-		PAD_CFG_GPI(GPP_H22, NONE, DEEP),
-		_PAD_CFG_STRUCT(GPP_H23, 0x82880100, 0x0000),
-		_PAD_CFG_STRUCT(GPP_I0, 0x46080100, 0x0000),
-		_PAD_CFG_STRUCT(GPP_I1, 0x46080100, 0x0000),
-		_PAD_CFG_STRUCT(GPP_I2, 0x46080100, 0x0000),
-		_PAD_CFG_STRUCT(GPP_I3, 0x46080100, 0x0000),
-		PAD_CFG_NF(GPP_I4, NONE, DEEP, NF1),
-		PAD_CFG_TERM_GPO(GPP_I5, 0, UP_20K, PLTRST),
-		PAD_CFG_GPI(GPP_I6, NONE, DEEP),
-		PAD_CFG_GPI(GPP_I7, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_I8, 1, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_I9, 1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_I10, NONE, DEEP),
-		PAD_CFG_GPI(GPP_I11, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_I12, 1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_I13, NONE, DEEP),
-		PAD_CFG_GPI(GPP_I14, NONE, DEEP),
-		PAD_CFG_NF(GPP_J0, NONE, DEEP, NF1),
-		PAD_CFG_TERM_GPO(GPP_J1, 1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_J2, NONE, DEEP),
-		PAD_CFG_GPI(GPP_J3, NONE, DEEP),
-		PAD_CFG_NF(GPP_J4, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_J5, UP_20K, DEEP, NF1),
-		PAD_CFG_NF(GPP_J6, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_J7, UP_20K, DEEP, NF1),
-		PAD_CFG_NF(GPP_J8, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_J9, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPP_J10, NONE, DEEP),
-		PAD_CFG_GPI(GPP_J11, DN_20K, DEEP),
-		PAD_CFG_TERM_GPO(GPP_K0, 0, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_K1, 0, NONE, DEEP),
-		PAD_CFG_GPI(GPP_K2, NONE, DEEP),
-		_PAD_CFG_STRUCT(GPP_K3, 0x40880100, 0x0000),
-		_PAD_CFG_STRUCT(GPP_K4, 0x44000101, 0x0000),
-		PAD_CFG_GPI(GPP_K5, NONE, DEEP),
-		_PAD_CFG_STRUCT(GPP_K6, 0x40880100, 0x0000),
-		PAD_CFG_GPI(GPP_K7, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_K8, 0, NONE, DEEP),
-		PAD_CFG_GPI(GPP_K9, NONE, DEEP),
-		PAD_CFG_GPI(GPP_K10, NONE, DEEP),
-		PAD_CFG_GPI(GPP_K11, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_K12, 0, NONE, DEEP),
-		PAD_CFG_GPI(GPP_K13, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_K14, 0, NONE, DEEP),
-		_PAD_CFG_STRUCT(GPP_K15, 0x80100100, 0x0000),
-		PAD_CFG_GPI(GPP_K16, NONE, DEEP),
-		PAD_CFG_GPI(GPP_K17, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_K18, 1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_K19, NONE, DEEP),
-		PAD_CFG_GPI(GPP_K20, NONE, DEEP),
-		PAD_CFG_GPI(GPP_K21, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_K22, 0, NONE, DEEP),
-		PAD_CFG_GPI(GPP_K23, NONE, DEEP),
-};
-
-#endif
-
-#endif

models/addw2/hda_verb.c

@@ -1,43 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#include <device/azalia_device.h>
-
-const u32 cim_verb_data[] = {
-	/* Realtek, ALC1220 */
-	0x10ec1220, /* Vendor ID */
-	0x155865e1, /* Subsystem ID */
-	12, /* Number of entries */
-	AZALIA_SUBVENDOR(0, 0x155865e1),
-	AZALIA_PIN_CFG(0, 0x12, 0x90a60130),
-	AZALIA_PIN_CFG(0, 0x14, 0x0421101f),
-	AZALIA_PIN_CFG(0, 0x15, 0x40000000),
-	AZALIA_PIN_CFG(0, 0x16, 0x411111f0),
-	AZALIA_PIN_CFG(0, 0x17, 0x411111f0),
-	AZALIA_PIN_CFG(0, 0x18, 0x04a11040),
-	AZALIA_PIN_CFG(0, 0x19, 0x411111f0),
-	AZALIA_PIN_CFG(0, 0x1a, 0x411111f0),
-	AZALIA_PIN_CFG(0, 0x1b, 0x90170110),
-	AZALIA_PIN_CFG(0, 0x1d, 0x40b7952d),
-	AZALIA_PIN_CFG(0, 0x1e, 0x04451150),
-	/* Intel, KabylakeHDMI */
-	0x8086280b, /* Vendor ID */
-	0x80860101, /* Subsystem ID */
-	4, /* Number of entries */
-	AZALIA_SUBVENDOR(2, 0x80860101),
-	AZALIA_PIN_CFG(2, 0x05, 0x18560010),
-	AZALIA_PIN_CFG(2, 0x06, 0x18560010),
-	AZALIA_PIN_CFG(2, 0x07, 0x18560010),
-	/* Nvidia, GPU92HDMI/DP */
-	0x10de0092, /* Vendor ID */
-	0x155865e1, /* Subsystem ID */
-	5, /* Number of entries */
-	AZALIA_SUBVENDOR(0, 0x155865e1),
-	AZALIA_PIN_CFG(0, 0x04, 0x185600f0),
-	AZALIA_PIN_CFG(0, 0x05, 0x185600f0),
-	AZALIA_PIN_CFG(0, 0x06, 0x185600f0),
-	AZALIA_PIN_CFG(0, 0x07, 0x185600f0),
-};
-
-const u32 pc_beep_verbs[] = {};
-
-AZALIA_ARRAY_SIZES;

models/addw3/AlderLakeFspBinPkg/AlderLakeFspBinPkg.dec

@@ -1,43 +0,0 @@
-## @file
-#  Component description file for AlderLake Fsp Bin package.
-#
-# @copyright
-#  INTEL CONFIDENTIAL
-#  Copyright 2016 - 2019 Intel Corporation.
-#
-#  The source code contained or described herein and all documents related to the
-#  source code ("Material") are owned by Intel Corporation or its suppliers or
-#  licensors. Title to the Material remains with Intel Corporation or its suppliers
-#  and licensors. The Material may contain trade secrets and proprietary and
-#  confidential information of Intel Corporation and its suppliers and licensors,
-#  and is protected by worldwide copyright and trade secret laws and treaty
-#  provisions. No part of the Material may be used, copied, reproduced, modified,
-#  published, uploaded, posted, transmitted, distributed, or disclosed in any way
-#  without Intel's prior express written permission.
-#
-#  No license under any patent, copyright, trade secret or other intellectual
-#  property right is granted to or conferred upon you by disclosure or delivery
-#  of the Materials, either expressly, by implication, inducement, estoppel or
-#  otherwise. Any license under such intellectual property rights must be
-#  express and approved by Intel in writing.
-#
-#  Unless otherwise agreed by Intel in writing, you may not remove or alter
-#  this notice or any other notice embedded in Materials by Intel or
-#  Intel's suppliers or licensors in any way.
-#
-#  This file contains an 'Intel Peripheral Driver' and is uniquely identified as
-#  "Intel Reference Module" and is licensed for Intel CPUs and chipsets under
-#  the terms of your license agreement with Intel or your vendor. This file may
-#  be modified by the user, subject to additional terms of the license agreement.
-#
-# @par Specification
-##
-
-[Defines]
-  DEC_SPECIFICATION              = 0x00010005
-  PACKAGE_NAME                   = AlderLakeFspBinPkg
-  PACKAGE_GUID                   = 5A536013-A46E-44AD-8B30-738235F77B06
-  PACKAGE_VERSION                = 1.02
-
-[Includes]
-  Include

models/addw3/AlderLakeFspBinPkg/Include/FirmwareVersionInfo.h

@@ -1,54 +0,0 @@
-/** @file
-  Intel Firmware Version Info (FVI) related definitions.
-
-  @todo update document/spec reference
-
-  Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
-  SPDX-License-Identifier: BSD-2-Clause-Patent
-
-@par Specification Reference:
-  System Management BIOS (SMBIOS) Reference Specification v3.0.0 dated 2015-Feb-12
-  http://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.0.0.pdf
-
-**/
-
-#ifndef __FIRMWARE_VERSION_INFO_H__
-#define __FIRMWARE_VERSION_INFO_H__
-
-#include <IndustryStandard/SmBios.h>
-
-#define INTEL_FIRMWARE_VERSION_INFO_GROUP_NAME    "Firmware Version Info"
-
-#pragma pack(1)
-
-///
-/// Firmware Version Structure
-///
-typedef struct {
-  UINT8                       MajorVersion;
-  UINT8                       MinorVersion;
-  UINT8                       Revision;
-  UINT16                      BuildNumber;
-} INTEL_FIRMWARE_VERSION;
-
-///
-/// Firmware Version Info (FVI) Structure
-///
-typedef struct {
-  SMBIOS_TABLE_STRING         ComponentName;  ///< String Index of Component Name
-  SMBIOS_TABLE_STRING         VersionString;  ///< String Index of Version String
-  INTEL_FIRMWARE_VERSION      Version;        ///< Firmware version
-} INTEL_FIRMWARE_VERSION_INFO;
-
-///
-/// SMBIOS OEM Type Intel Firmware Version Info (FVI) Structure
-///
-typedef struct {
-  SMBIOS_STRUCTURE            Header;         ///< SMBIOS structure header
-  UINT8                       Count;          ///< Number of FVI entries in this structure
-  INTEL_FIRMWARE_VERSION_INFO Fvi[1];         ///< FVI structure(s)
-} SMBIOS_TABLE_TYPE_OEM_INTEL_FVI;
-
-#pragma pack()
-
-#endif

models/addw3/AlderLakeFspBinPkg/Include/FirmwareVersionInfoHob.h

@@ -1,68 +0,0 @@
-/** @file
-  Header file for Firmware Version Information
-
- @copyright
-  Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR>
-
-  This program and the accompanying materials are licensed and made available under
-  the terms and conditions of the BSD License which accompanies this distribution.
-  The full text of the license may be found at
-  http://opensource.org/licenses/bsd-license.php
-
-  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#ifndef _FIRMWARE_VERSION_INFO_HOB_H_
-#define _FIRMWARE_VERSION_INFO_HOB_H_
-
-#include <Uefi/UefiMultiPhase.h>
-#include <Pi/PiBootMode.h>
-#include <Pi/PiHob.h>
-
-#pragma pack(1)
-///
-/// Firmware Version Structure
-///
-typedef struct {
-  UINT8                          MajorVersion;
-  UINT8                          MinorVersion;
-  UINT8                          Revision;
-  UINT16                         BuildNumber;
-} FIRMWARE_VERSION;
-
-///
-/// Firmware Version Information Structure
-///
-typedef struct {
-  UINT8                          ComponentNameIndex;        ///< Offset 0   Index of Component Name
-  UINT8                          VersionStringIndex;        ///< Offset 1   Index of Version String
-  FIRMWARE_VERSION               Version;                   ///< Offset 2-6 Firmware version
-} FIRMWARE_VERSION_INFO;
-
-#ifndef __SMBIOS_STANDARD_H__
-///
-/// The Smbios structure header.
-///
-typedef struct {
-  UINT8                          Type;
-  UINT8                          Length;
-  UINT16                         Handle;
-} SMBIOS_STRUCTURE;
-#endif
-
-///
-/// Firmware Version Information HOB Structure
-///
-typedef struct {
-  EFI_HOB_GUID_TYPE              Header;                    ///< Offset 0-23  The header of FVI HOB
-  SMBIOS_STRUCTURE               SmbiosData;                ///< Offset 24-27  The SMBIOS header of FVI HOB
-  UINT8                          Count;                     ///< Offset 28    Number of FVI elements included.
-///
-/// FIRMWARE_VERSION_INFO structures followed by the null terminated string buffer
-///
-} FIRMWARE_VERSION_INFO_HOB;
-#pragma pack()
-
-#endif // _FIRMWARE_VERSION_INFO_HOB_H_

models/addw3/AlderLakeFspBinPkg/Include/FspInfoHob.h

@@ -1,56 +0,0 @@
-/** @file
-  Header file for FSP Information HOB.
-
-@copyright
-  INTEL CONFIDENTIAL
-  Copyright 2017 - 2019 Intel Corporation.
-
-  The source code contained or described herein and all documents related to the
-  source code ("Material") are owned by Intel Corporation or its suppliers or
-  licensors. Title to the Material remains with Intel Corporation or its suppliers
-  and licensors. The Material may contain trade secrets and proprietary and
-  confidential information of Intel Corporation and its suppliers and licensors,
-  and is protected by worldwide copyright and trade secret laws and treaty
-  provisions. No part of the Material may be used, copied, reproduced, modified,
-  published, uploaded, posted, transmitted, distributed, or disclosed in any way
-  without Intel's prior express written permission.
-
-  No license under any patent, copyright, trade secret or other intellectual
-  property right is granted to or conferred upon you by disclosure or delivery
-  of the Materials, either expressly, by implication, inducement, estoppel or
-  otherwise. Any license under such intellectual property rights must be
-  express and approved by Intel in writing.
-
-  Unless otherwise agreed by Intel in writing, you may not remove or alter
-  this notice or any other notice embedded in Materials by Intel or
-  Intel's suppliers or licensors in any way.
-
-  This file contains an 'Intel Peripheral Driver' and is uniquely identified as
-  "Intel Reference Module" and is licensed for Intel CPUs and chipsets under
-  the terms of your license agreement with Intel or your vendor. This file may
-  be modified by the user, subject to additional terms of the license agreement.
-
-@par Specification Reference:
-**/
-
-#ifndef _FSP_INFO_HOB_H_
-#define _FSP_INFO_HOB_H_
-
-extern EFI_GUID gFspInfoGuid;
-
-#pragma pack (push, 1)
-
-typedef struct {
-UINT8              SiliconInitVersionMajor;
-UINT8              SiliconInitVersionMinor;
-UINT8              SiliconInitVersionRevision;
-UINT8              SiliconInitVersionBuild;
-UINT8              FspVersionRevision;
-UINT8              FspVersionBuild;
-UINT8              TimeStamp [12];
-UINT8              FspVersionMinor;
-} FSP_INFO_HOB;
-
-#pragma pack (pop)
-
-#endif // _FSP_INFO_HOB_H_

models/addw3/AlderLakeFspBinPkg/Include/FspUpd.h

@@ -1,48 +0,0 @@
-/** @file
-
-Copyright (c) 2023, Intel Corporation. All rights reserved.<BR>
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this
-  list of conditions and the following disclaimer.
-* Redistributions in binary form must reproduce the above copyright notice, this
-  list of conditions and the following disclaimer in the documentation and/or
-  other materials provided with the distribution.
-* Neither the name of Intel Corporation nor the names of its contributors may
-  be used to endorse or promote products derived from this software without
-  specific prior written permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
-  THE POSSIBILITY OF SUCH DAMAGE.
-
-  This file is automatically generated. Please do NOT modify !!!
-
-**/
-
-#ifndef __FSPUPD_H__
-#define __FSPUPD_H__
-
-#include <FspEas.h>
-
-#pragma pack(1)
-
-#define FSPT_UPD_SIGNATURE               0x545F4450554C4441        /* 'ADLUPD_T' */
-
-#define FSPM_UPD_SIGNATURE               0x4D5F4450554C4441        /* 'ADLUPD_M' */
-
-#define FSPS_UPD_SIGNATURE               0x535F4450554C4441        /* 'ADLUPD_S' */
-
-#pragma pack()
-
-#endif

models/addw3/AlderLakeFspBinPkg/Include/FsptUpd.h

@@ -1,357 +0,0 @@
-/** @file
-
-Copyright (c) 2023, Intel Corporation. All rights reserved.<BR>
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this
-  list of conditions and the following disclaimer.
-* Redistributions in binary form must reproduce the above copyright notice, this
-  list of conditions and the following disclaimer in the documentation and/or
-  other materials provided with the distribution.
-* Neither the name of Intel Corporation nor the names of its contributors may
-  be used to endorse or promote products derived from this software without
-  specific prior written permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
-  THE POSSIBILITY OF SUCH DAMAGE.
-
-  This file is automatically generated. Please do NOT modify !!!
-
-**/
-
-#ifndef __FSPTUPD_H__
-#define __FSPTUPD_H__
-
-#include <FspUpd.h>
-
-#pragma pack(1)
-
-
-/** Fsp T Core UPD
-**/
-typedef struct {
-
-/** Offset 0x0040
-**/
-  UINT32                      MicrocodeRegionBase;
-
-/** Offset 0x0044
-**/
-  UINT32                      MicrocodeRegionSize;
-
-/** Offset 0x0048
-**/
-  UINT32                      CodeRegionBase;
-
-/** Offset 0x004C
-**/
-  UINT32                      CodeRegionSize;
-
-/** Offset 0x0050
-**/
-  UINT8                       Reserved[16];
-} FSPT_CORE_UPD;
-
-/** Fsp T Configuration
-**/
-typedef struct {
-
-/** Offset 0x0060 - PcdSerialIoUartDebugEnable
-  Enable SerialIo Uart debug library with/without initializing SerialIo Uart device in FSP.
-  0:Disable, 1:Enable and Initialize, 2:Enable without Initializing
-**/
-  UINT8                       PcdSerialIoUartDebugEnable;
-
-/** Offset 0x0061 - PcdSerialIoUartNumber
-  Select SerialIo Uart Controller for debug. Note: If UART0 is selected as CNVi BT
-  Core interface, it cannot be used for debug purpose.
-  0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2
-**/
-  UINT8                       PcdSerialIoUartNumber;
-
-/** Offset 0x0062 - PcdSerialIoUartMode - FSPT
-  Select SerialIo Uart Controller mode
-  0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom,
-  4:SerialIoUartSkipInit
-**/
-  UINT8                       PcdSerialIoUartMode;
-
-/** Offset 0x0063
-**/
-  UINT8                       Rsvd00;
-
-/** Offset 0x0064 - PcdSerialIoUartBaudRate - FSPT
-  Set default BaudRate Supported from 0 - default to 6000000
-**/
-  UINT32                      PcdSerialIoUartBaudRate;
-
-/** Offset 0x0068 - Pci Express Base Address
-  Base address to be programmed for Pci Express
-**/
-  UINT64                      PcdPciExpressBaseAddress;
-
-/** Offset 0x0070 - Pci Express Region Length
-  Region Length to be programmed for Pci Express
-**/
-  UINT32                      PcdPciExpressRegionLength;
-
-/** Offset 0x0074 - PcdSerialIoUartParity - FSPT
-  Set default Parity.
-  0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity
-**/
-  UINT8                       PcdSerialIoUartParity;
-
-/** Offset 0x0075 - PcdSerialIoUartDataBits - FSPT
-  Set default word length. 0: Default, 5,6,7,8
-**/
-  UINT8                       PcdSerialIoUartDataBits;
-
-/** Offset 0x0076 - PcdSerialIoUartStopBits - FSPT
-  Set default stop bits.
-  0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits
-**/
-  UINT8                       PcdSerialIoUartStopBits;
-
-/** Offset 0x0077 - PcdSerialIoUartAutoFlow - FSPT
-  Enables UART hardware flow control, CTS and RTS lines.
-  0: Disable, 1:Enable
-**/
-  UINT8                       PcdSerialIoUartAutoFlow;
-
-/** Offset 0x0078 - PcdSerialIoUartRxPinMux - FSPT
-  Select RX pin muxing for SerialIo UART used for debug
-**/
-  UINT32                      PcdSerialIoUartRxPinMux;
-
-/** Offset 0x007C - PcdSerialIoUartTxPinMux - FSPT
-  Select TX pin muxing for SerialIo UART used for debug
-**/
-  UINT32                      PcdSerialIoUartTxPinMux;
-
-/** Offset 0x0080 - PcdSerialIoUartRtsPinMux - FSPT
-  Select SerialIo Uart used for debug Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS*
-  for possible values.
-**/
-  UINT32                      PcdSerialIoUartRtsPinMux;
-
-/** Offset 0x0084 - PcdSerialIoUartCtsPinMux - FSPT
-  Select SerialIo Uart used for debug Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS*
-  for possible values.
-**/
-  UINT32                      PcdSerialIoUartCtsPinMux;
-
-/** Offset 0x0088 - PcdSerialIoUartDebugMmioBase - FSPT
-  Select SerialIo Uart default MMIO resource in SEC/PEI phase when PcdSerialIoUartMode
-  = SerialIoUartPci.
-**/
-  UINT32                      PcdSerialIoUartDebugMmioBase;
-
-/** Offset 0x008C - PcdLpcUartDebugEnable
-  Enable to initialize LPC Uart device in FSP.
-  0:Disable, 1:Enable
-**/
-  UINT8                       PcdLpcUartDebugEnable;
-
-/** Offset 0x008D - Debug Interfaces
-  Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub,
-  BIT2 - Not used.
-**/
-  UINT8                       PcdDebugInterfaceFlags;
-
-/** Offset 0x008E - PcdSerialDebugLevel
-  Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load,
-  Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings,
-  Info & Verbose.
-  0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load
-  Error Warnings and Info, 5:Load Error Warnings Info and Verbose
-**/
-  UINT8                       PcdSerialDebugLevel;
-
-/** Offset 0x008F - ISA Serial Base selection
-  Select ISA Serial Base address. Default is 0x3F8.
-  0:0x3F8, 1:0x2F8
-**/
-  UINT8                       PcdIsaSerialUartBase;
-
-/** Offset 0x0090 - PcdSerialIo2ndUartEnable
-  Enable Additional SerialIo Uart device in FSP.
-  0:Disable, 1:Enable and Initialize, 2:Enable without Initializing
-**/
-  UINT8                       PcdSerialIo2ndUartEnable;
-
-/** Offset 0x0091 - PcdSerialIo2ndUartNumber
-  Select SerialIo Uart Controller Number
-  0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2
-**/
-  UINT8                       PcdSerialIo2ndUartNumber;
-
-/** Offset 0x0092 - PcdSerialIo2ndUartMode - FSPT
-  Select SerialIo Uart Controller mode
-  0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom,
-  4:SerialIoUartSkipInit
-**/
-  UINT8                       PcdSerialIo2ndUartMode;
-
-/** Offset 0x0093
-**/
-  UINT8                       Rsvd01;
-
-/** Offset 0x0094 - PcdSerialIo2ndUartBaudRate - FSPT
-  Set default BaudRate Supported from 0 - default to 6000000
-**/
-  UINT32                      PcdSerialIo2ndUartBaudRate;
-
-/** Offset 0x0098 - PcdSerialIo2ndUartParity - FSPT
-  Set default Parity.
-  0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity
-**/
-  UINT8                       PcdSerialIo2ndUartParity;
-
-/** Offset 0x0099 - PcdSerialIo2ndUartDataBits - FSPT
-  Set default word length. 0: Default, 5,6,7,8
-**/
-  UINT8                       PcdSerialIo2ndUartDataBits;
-
-/** Offset 0x009A - PcdSerialIo2ndUartStopBits - FSPT
-  Set default stop bits.
-  0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits
-**/
-  UINT8                       PcdSerialIo2ndUartStopBits;
-
-/** Offset 0x009B - PcdSerialIo2ndUartAutoFlow - FSPT
-  Enables UART hardware flow control, CTS and RTS lines.
-  0: Disable, 1:Enable
-**/
-  UINT8                       PcdSerialIo2ndUartAutoFlow;
-
-/** Offset 0x009C - PcdSerialIo2ndUartRxPinMux - FSPT
-  Select RX pin muxing for SerialIo UART
-**/
-  UINT32                      PcdSerialIo2ndUartRxPinMux;
-
-/** Offset 0x00A0 - PcdSerialIo2ndUartTxPinMux - FSPT
-  Select TX pin muxing for SerialIo UART
-**/
-  UINT32                      PcdSerialIo2ndUartTxPinMux;
-
-/** Offset 0x00A4 - PcdSerialIo2ndUartRtsPinMux - FSPT
-  Select SerialIo Uart Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS*
-  for possible values.
-**/
-  UINT32                      PcdSerialIo2ndUartRtsPinMux;
-
-/** Offset 0x00A8 - PcdSerialIo2ndUartCtsPinMux - FSPT
-  Select SerialIo Uart Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS*
-  for possible values.
-**/
-  UINT32                      PcdSerialIo2ndUartCtsPinMux;
-
-/** Offset 0x00AC - PcdSerialIo2ndUartMmioBase - FSPT
-  Select SerialIo Uart default MMIO resource in SEC/PEI phase when PcdSerialIo2ndUartMode
-  = SerialIoUartPci.
-**/
-  UINT32                      PcdSerialIo2ndUartMmioBase;
-
-/** Offset 0x00B0
-**/
-  UINT32                      TopMemoryCacheSize;
-
-/** Offset 0x00B4 - FspDebugHandler
-  <b>Optional</b> pointer to the boot loader's implementation of FSP_DEBUG_HANDLER.
-**/
-  UINT32                      FspDebugHandler;
-
-/** Offset 0x00B8 - Serial Io SPI Chip Select Polarity
-  Sets polarity for each chip Select. Available options: 0:SerialIoSpiCsActiveLow,
-  1:SerialIoSpiCsActiveHigh
-**/
-  UINT8                       PcdSerialIoSpiCsPolarity[2];
-
-/** Offset 0x00BA - Serial Io SPI Chip Select Enable
-  0:Disabled, 1:Enabled. Enables GPIO for CS0 or CS1 if it is Enabled
-**/
-  UINT8                       PcdSerialIoSpiCsEnable[2];
-
-/** Offset 0x00BC - Serial Io SPI Device Mode
-  When mode is set to Pci, controller is initalized in early stage. Available modes:
-  0:SerialIoSpiDisabled, 1:SerialIoSpiPci.
-**/
-  UINT8                       PcdSerialIoSpiMode;
-
-/** Offset 0x00BD - Serial Io SPI Default Chip Select Output
-  Sets Default CS as Output. Available options: 0:CS0, 1:CS1
-**/
-  UINT8                       PcdSerialIoSpiDefaultCsOutput;
-
-/** Offset 0x00BE - Serial Io SPI Default Chip Select Mode HW/SW
-  Sets Default CS Mode Hardware or Software. Available options: 0:HW, 1:SW
-**/
-  UINT8                       PcdSerialIoSpiCsMode;
-
-/** Offset 0x00BF - Serial Io SPI Default Chip Select State Low/High
-  Sets Default CS State Low or High. Available options: 0:Low, 1:High
-**/
-  UINT8                       PcdSerialIoSpiCsState;
-
-/** Offset 0x00C0 - Serial Io SPI Device Number
-  Select which Serial Io SPI controller is initalized in early stage.
-**/
-  UINT8                       PcdSerialIoSpiNumber;
-
-/** Offset 0x00C1
-**/
-  UINT8                       Rsvd02[3];
-
-/** Offset 0x00C4 - Serial Io SPI Device MMIO Base
-  Assigns MMIO for Serial Io SPI controller usage in early stage.
-**/
-  UINT32                      PcdSerialIoSpiMmioBase;
-
-/** Offset 0x00C8
-**/
-  UINT8                       ReservedFsptUpd1[16];
-} FSP_T_CONFIG;
-
-/** Fsp T UPD Configuration
-**/
-typedef struct {
-
-/** Offset 0x0000
-**/
-  FSP_UPD_HEADER              FspUpdHeader;
-
-/** Offset 0x0020
-**/
-  FSPT_ARCH_UPD               FsptArchUpd;
-
-/** Offset 0x0040
-**/
-  FSPT_CORE_UPD               FsptCoreUpd;
-
-/** Offset 0x0060
-**/
-  FSP_T_CONFIG                FsptConfig;
-
-/** Offset 0x00D8
-**/
-  UINT8                       Rsvd03[6];
-
-/** Offset 0x00DE
-**/
-  UINT16                      UpdTerminator;
-} FSPT_UPD;
-
-#pragma pack()
-
-#endif

models/addw3/AlderLakeFspBinPkg/Include/GpioConfig.h

@@ -1,356 +0,0 @@
-/** @file
-  Header file for GpioConfig structure used by GPIO library.
-
- @copyright
-  INTEL CONFIDENTIAL
-  Copyright 2014 - 2017 Intel Corporation.
-
-  The source code contained or described herein and all documents related to the
-  source code ("Material") are owned by Intel Corporation or its suppliers or
-  licensors. Title to the Material remains with Intel Corporation or its suppliers
-  and licensors. The Material may contain trade secrets and proprietary and
-  confidential information of Intel Corporation and its suppliers and licensors,
-  and is protected by worldwide copyright and trade secret laws and treaty
-  provisions. No part of the Material may be used, copied, reproduced, modified,
-  published, uploaded, posted, transmitted, distributed, or disclosed in any way
-  without Intel's prior express written permission.
-
-  No license under any patent, copyright, trade secret or other intellectual
-  property right is granted to or conferred upon you by disclosure or delivery
-  of the Materials, either expressly, by implication, inducement, estoppel or
-  otherwise. Any license under such intellectual property rights must be
-  express and approved by Intel in writing.
-
-  Unless otherwise agreed by Intel in writing, you may not remove or alter
-  this notice or any other notice embedded in Materials by Intel or
-  Intel's suppliers or licensors in any way.
-
-  This file contains an 'Intel Peripheral Driver' and is uniquely identified as
-  "Intel Reference Module" and is licensed for Intel CPUs and chipsets under
-  the terms of your license agreement with Intel or your vendor. This file may
-  be modified by the user, subject to additional terms of the license agreement.
-
-@par Specification Reference:
-**/
-#ifndef _GPIO_CONFIG_H_
-#define _GPIO_CONFIG_H_
-
-#pragma pack(push, 1)
-
-///
-/// For any GpioPad usage in code use GPIO_PAD type
-///
-typedef UINT32 GPIO_PAD;
-
-
-///
-/// For any GpioGroup usage in code use GPIO_GROUP type
-///
-typedef UINT32 GPIO_GROUP;
-
-/**
-  GPIO configuration structure used for pin programming.
-  Structure contains fields that can be used to configure pad.
-**/
-typedef struct {
-  /**
-  Pad Mode
-  Pad can be set as GPIO or one of its native functions.
-  When in native mode setting Direction (except Inversion), OutputState,
-  InterruptConfig, Host Software Pad Ownership and OutputStateLock are unnecessary.
-  Refer to definition of GPIO_PAD_MODE.
-  Refer to EDS for each native mode according to the pad.
-  **/
-  UINT32 PadMode            : 5;
-  /**
-  Host Software Pad Ownership
-  Set pad to ACPI mode or GPIO Driver Mode.
-  Refer to definition of GPIO_HOSTSW_OWN.
-  **/
-  UINT32 HostSoftPadOwn     : 2;
-  /**
-  GPIO Direction
-  Can choose between In, In with inversion, Out, both In and Out, both In with inversion and out or disabling both.
-  Refer to definition of GPIO_DIRECTION for supported settings.
-  **/
-  UINT32 Direction           : 6;
-  /**
-  Output State
-  Set Pad output value.
-  Refer to definition of GPIO_OUTPUT_STATE for supported settings.
-  This setting takes place when output is enabled.
-  **/
-  UINT32 OutputState         : 2;
-  /**
-  GPIO Interrupt Configuration
-  Set Pad to cause one of interrupts (IOxAPIC/SCI/SMI/NMI).
-  This setting is applicable only if GPIO is in GpioMode with input enabled.
-  Refer to definition of GPIO_INT_CONFIG for supported settings.
-  **/
-  UINT32 InterruptConfig     : 9;
-  /**
-  GPIO Power Configuration.
-  This setting controls Pad Reset Configuration.
-  Refer to definition of GPIO_RESET_CONFIG for supported settings.
-  **/
-  UINT32 PowerConfig        : 8;
-  /**
-  GPIO Electrical Configuration
-  This setting controls pads termination and voltage tolerance.
-  Refer to definition of GPIO_ELECTRICAL_CONFIG for supported settings.
-  **/
-  UINT32 ElectricalConfig   : 9;
-  /**
-  GPIO Lock Configuration
-  This setting controls pads lock.
-  Refer to definition of GPIO_LOCK_CONFIG for supported settings.
-  **/
-  UINT32 LockConfig         : 4;
-  /**
-  Additional GPIO configuration
-  Refer to definition of GPIO_OTHER_CONFIG for supported settings.
-  **/
-  UINT32 OtherSettings     :  2;
-  UINT32 RsvdBits          : 17;    ///< Reserved bits for future extension
-} GPIO_CONFIG;
-
-
-typedef enum {
-  GpioHardwareDefault        = 0x0    ///< Leave setting unmodified
-} GPIO_HARDWARE_DEFAULT;
-
-/**
-  GPIO Pad Mode
-  Refer to GPIO documentation on native functions available for certain pad.
-  If GPIO is set to one of NativeX modes then following settings are not applicable
-  and can be skipped:
-  - Interrupt related settings
-  - Host Software Ownership
-  - Output/Input enabling/disabling
-  - Output lock
-**/
-typedef enum {
-  GpioPadModeGpio     = 0x1,
-  GpioPadModeNative1  = 0x3,
-  GpioPadModeNative2  = 0x5,
-  GpioPadModeNative3  = 0x7,
-  GpioPadModeNative4  = 0x9
-} GPIO_PAD_MODE;
-
-/**
-  Host Software Pad Ownership modes
-  This setting affects GPIO interrupt status registers. Depending on chosen ownership
-  some GPIO Interrupt status register get updated and other masked.
-  Please refer to EDS for HOSTSW_OWN register description.
-**/
-typedef enum {
-  GpioHostOwnDefault = 0x0,   ///< Leave ownership value unmodified
-  /**
-  Set HOST ownership to ACPI.
-  Use this setting if pad is not going to be used by GPIO OS driver.
-  If GPIO is configured to generate SCI/SMI/NMI then this setting must be
-  used for interrupts to work
-  **/
-  GpioHostOwnAcpi    = 0x1,
-  /**
-  Set HOST ownership to GPIO Driver mode.
-  Use this setting only if GPIO pad should be controlled by GPIO OS Driver.
-  GPIO OS Driver will be able to control the pad if appropriate entry in
-  ACPI exists (refer to ACPI specification for GpioIo and GpioInt descriptors)
-  **/
-  GpioHostOwnGpio    = 0x3
-} GPIO_HOSTSW_OWN;
-
-///
-/// GPIO Direction
-///
-typedef enum {
-  GpioDirDefault         = 0x0,                ///< Leave pad direction setting unmodified
-  GpioDirInOut           = (0x1 | (0x1 << 3)), ///< Set pad for both output and input
-  GpioDirInInvOut        = (0x1 | (0x3 << 3)), ///< Set pad for both output and input with inversion
-  GpioDirIn              = (0x3 | (0x1 << 3)), ///< Set pad for input only
-  GpioDirInInv           = (0x3 | (0x3 << 3)), ///< Set pad for input with inversion
-  GpioDirOut             = 0x5,                ///< Set pad for output only
-  GpioDirNone            = 0x7                 ///< Disable both output and input
-} GPIO_DIRECTION;
-
-/**
-  GPIO Output State
-  This field is relevant only if output is enabled
-**/
-typedef enum {
-  GpioOutDefault         = 0x0,  ///< Leave output value unmodified
-  GpioOutLow             = 0x1,  ///< Set output to low
-  GpioOutHigh            = 0x3   ///< Set output to high
-} GPIO_OUTPUT_STATE;
-
-/**
-  GPIO interrupt configuration
-  This setting is applicable only if pad is in GPIO mode and has input enabled.
-  GPIO_INT_CONFIG allows to choose which interrupt is generated (IOxAPIC/SCI/SMI/NMI)
-  and how it is triggered (edge or level). Refer to PADCFG_DW0 register description in
-  EDS for details on this settings.
-  Field from GpioIntNmi to GpioIntApic can be OR'ed with GpioIntLevel to GpioIntBothEdge
-  to describe an interrupt e.g. GpioIntApic | GpioIntLevel
-  If GPIO is set to cause an SCI then also GPI_GPE_EN is enabled for this pad.
-  If GPIO is set to cause an NMI then also GPI_NMI_EN is enabled for this pad.
-  Not all GPIO are capable of generating an SMI or NMI interrupt.
-  When routing GPIO to cause an IOxAPIC interrupt care must be taken, as this
-  interrupt cannot be shared and its IRQn number is not configurable.
-  Refer to EDS for GPIO pads IRQ numbers (PADCFG_DW1.IntSel)
-  If GPIO is under GPIO OS driver control and appropriate ACPI GpioInt descriptor
-  exist then use only trigger type setting (from GpioIntLevel to GpioIntBothEdge).
-  This type of GPIO Driver interrupt doesn't have any additional routing setting
-  required to be set by BIOS. Interrupt is handled by GPIO OS Driver.
-**/
-
-typedef enum {
-  GpioIntDefault           = 0x0,  ///< Leave value of interrupt routing unmodified
-  GpioIntDis               = 0x1,  ///< Disable IOxAPIC/SCI/SMI/NMI interrupt generation
-  GpioIntNmi               = 0x3,  ///< Enable NMI interrupt only
-  GpioIntSmi               = 0x5,  ///< Enable SMI interrupt only
-  GpioIntSci               = 0x9,  ///< Enable SCI interrupt only
-  GpioIntApic              = 0x11, ///< Enable IOxAPIC interrupt only
-  GpioIntLevel       = (0x1 << 5), ///< Set interrupt as level triggered
-  GpioIntEdge        = (0x3 << 5), ///< Set interrupt as edge triggered (type of edge depends on input inversion)
-  GpioIntLvlEdgDis   = (0x5 << 5), ///< Disable interrupt trigger
-  GpioIntBothEdge    = (0x7 << 5)  ///< Set interrupt as both edge triggered
-} GPIO_INT_CONFIG;
-
-#define B_GPIO_INT_CONFIG_INT_SOURCE_MASK  0x1F ///< Mask for GPIO_INT_CONFIG for interrupt source
-#define B_GPIO_INT_CONFIG_INT_TYPE_MASK    0xE0 ///< Mask for GPIO_INT_CONFIG for interrupt type
-
-/**
-  GPIO Power Configuration
-  GPIO_RESET_CONFIG allows to set GPIO Reset type (PADCFG_DW0.PadRstCfg) which will
-  be used to reset certain GPIO settings.
-  Refer to EDS for settings that are controllable by PadRstCfg.
-**/
-typedef enum {
-
-
-  GpioResetDefault   = 0x00,        ///< Leave value of pad reset unmodified
-  ///
-  /// Deprecated settings. Maintained only for compatibility.
-  ///
-  GpioResetPwrGood   = 0x09,        ///< GPP: RSMRST; GPD: DSW_PWROK; (PadRstCfg = 00b = "Powergood")
-  GpioResetDeep      = 0x0B,        ///< Deep GPIO Reset (PadRstCfg = 01b = "Deep GPIO Reset")
-  GpioResetNormal    = 0x0D,        ///< GPIO Reset (PadRstCfg = 10b = "GPIO Reset" )
-  GpioResetResume    = 0x0F,        ///< GPP: Reserved; GPD: RSMRST; (PadRstCfg = 11b = "Resume Reset" )
-
-  ///
-  /// New GPIO reset configuration options
-  ///
-  /**
-  Resume Reset (RSMRST)
-    GPP: PadRstCfg = 00b = "Powergood"
-    GPD: PadRstCfg = 11b = "Resume Reset"
-  Pad setting will reset on:
-  - DeepSx transition
-  - G3
-  Pad settings will not reset on:
-  - S3/S4/S5 transition
-  - Warm/Cold/Global reset
-  **/
-  GpioResumeReset      = 0x01,
-  /**
-  Host Deep Reset
-    PadRstCfg = 01b = "Deep GPIO Reset"
-  Pad settings will reset on:
-  - Warm/Cold/Global reset
-  - DeepSx transition
-  - G3
-  Pad settings will not reset on:
-  - S3/S4/S5 transition
-  **/
-  GpioHostDeepReset    = 0x03,
-  /**
-  Platform Reset (PLTRST)
-    PadRstCfg = 10b = "GPIO Reset"
-  Pad settings will reset on:
-  - S3/S4/S5 transition
-  - Warm/Cold/Global reset
-  - DeepSx transition
-  - G3
-  **/
-  GpioPlatformReset    = 0x05,
-  /**
-  Deep Sleep Well Reset (DSW_PWROK)
-    GPP: not applicable
-    GPD: PadRstCfg = 00b = "Powergood"
-  Pad settings will reset on:
-  - G3
-  Pad settings will not reset on:
-  - S3/S4/S5 transition
-  - Warm/Cold/Global reset
-  - DeepSx transition
-  **/
-  GpioDswReset         = 0x07
-} GPIO_RESET_CONFIG;
-
-/**
-  GPIO Electrical Configuration
-  Set GPIO termination and Pad Tolerance (applicable only for some pads)
-  Field from GpioTermNone to GpioTermNative can be OR'ed with GpioTolerance1v8.
-**/
-typedef enum {
-  GpioTermDefault          = 0x0,  ///< Leave termination setting unmodified
-  GpioTermNone             = 0x1,  ///< none
-  GpioTermWpd5K            = 0x5,  ///< 5kOhm weak pull-down
-  GpioTermWpd20K           = 0x9,  ///< 20kOhm weak pull-down
-  GpioTermWpu1K            = 0x13, ///< 1kOhm weak pull-up
-  GpioTermWpu2K            = 0x17, ///< 2kOhm weak pull-up
-  GpioTermWpu5K            = 0x15, ///< 5kOhm weak pull-up
-  GpioTermWpu20K           = 0x19, ///< 20kOhm weak pull-up
-  GpioTermWpu1K2K          = 0x1B, ///< 1kOhm & 2kOhm weak pull-up
-  /**
-  Native function controls pads termination
-  This setting is applicable only to some native modes.
-  Please check EDS to determine which native functionality
-  can control pads termination
-  **/
-  GpioTermNative     = 0x1F,
-  GpioNoTolerance1v8 = (0x1 << 5),   ///< Disable 1.8V pad tolerance
-  GpioTolerance1v8   = (0x3 << 5)    ///< Enable 1.8V pad tolerance
-} GPIO_ELECTRICAL_CONFIG;
-
-#define B_GPIO_ELECTRICAL_CONFIG_TERMINATION_MASK    0x1F   ///< Mask for GPIO_ELECTRICAL_CONFIG for termination value
-#define B_GPIO_ELECTRICAL_CONFIG_1V8_TOLERANCE_MASK  0x60   ///< Mask for GPIO_ELECTRICAL_CONFIG for 1v8 tolerance setting
-
-/**
-  GPIO LockConfiguration
-  Set GPIO configuration lock and output state lock.
-  GpioLockPadConfig and GpioLockOutputState can be OR'ed.
-  Lock settings reset is in Powergood domain. Care must be taken when using this setting
-  as fields it locks may be reset by a different signal and can be controllable
-  by what is in GPIO_RESET_CONFIG (PADCFG_DW0.PadRstCfg). GPIO library provides
-  functions which allow to unlock a GPIO pad.
-**/
-typedef enum {
-  GpioLockDefault          = 0x0,  ///< Leave lock setting unmodified
-  GpioPadConfigLock        = 0x3,  ///< Lock Pad Configuration
-  GpioOutputStateLock      = 0x5   ///< Lock GPIO pad output value
-} GPIO_LOCK_CONFIG;
-
-#define B_GPIO_LOCK_CONFIG_PAD_CONF_LOCK_MASK  0x3  ///< Mask for GPIO_LOCK_CONFIG for Pad Configuration Lock
-#define B_GPIO_LOCK_CONFIG_OUTPUT_LOCK_MASK    0x5  ///< Mask for GPIO_LOCK_CONFIG for Pad Output Lock
-
-/**
-  Other GPIO Configuration
-  GPIO_OTHER_CONFIG is used for less often settings and for future extensions
-  Supported settings:
-   - RX raw override to '1' - allows to override input value to '1'
-      This setting is applicable only if in input mode (both in GPIO and native usage).
-      The override takes place at the internal pad state directly from buffer and before the RXINV.
-**/
-typedef enum {
-  GpioRxRaw1Default           = 0x0,  ///< Use default input override value
-  GpioRxRaw1Dis               = 0x1,  ///< Don't override input
-  GpioRxRaw1En                = 0x3   ///< Override input to '1'
-} GPIO_OTHER_CONFIG;
-
-#define B_GPIO_OTHER_CONFIG_RXRAW_MASK  0x3  ///< Mask for GPIO_OTHER_CONFIG for RxRaw1 setting
-
-#pragma pack(pop)
-
-#endif //_GPIO_CONFIG_H_

models/addw3/AlderLakeFspBinPkg/Library/FspPcdListLib/FspPcdListLibNull.inf

@@ -1,85 +0,0 @@
-## @file
-# Library instance to list all DynamicEx PCD FSP consumes.
-#
-# @copyright
-#  INTEL CONFIDENTIAL
-#  Copyright 2019 - 2021 Intel Corporation.
-#
-#  The source code contained or described herein and all documents related to the
-#  source code ("Material") are owned by Intel Corporation or its suppliers or
-#  licensors. Title to the Material remains with Intel Corporation or its suppliers
-#  and licensors. The Material may contain trade secrets and proprietary and
-#  confidential information of Intel Corporation and its suppliers and licensors,
-#  and is protected by worldwide copyright and trade secret laws and treaty
-#  provisions. No part of the Material may be used, copied, reproduced, modified,
-#  published, uploaded, posted, transmitted, distributed, or disclosed in any way
-#  without Intel's prior express written permission.
-#
-#  No license under any patent, copyright, trade secret or other intellectual
-#  property right is granted to or conferred upon you by disclosure or delivery
-#  of the Materials, either expressly, by implication, inducement, estoppel or
-#  otherwise. Any license under such intellectual property rights must be
-#  express and approved by Intel in writing.
-#
-#  Unless otherwise agreed by Intel in writing, you may not remove or alter
-#  this notice or any other notice embedded in Materials by Intel or
-#  Intel's suppliers or licensors in any way.
-#
-#  This file contains an 'Intel Peripheral Driver' and is uniquely identified as
-#  "Intel Reference Module" and is licensed for Intel CPUs and chipsets under
-#  the terms of your license agreement with Intel or your vendor. This file may
-#  be modified by the user, subject to additional terms of the license agreement.
-#
-# @par Specification Reference:
-#
-##
-
-[Defines]
-  INF_VERSION                    = 0x00010017
-  BASE_NAME                      = FspPcdListLibNull
-  FILE_GUID                      = C5D4D79E-3D5C-4EB6-899E-6F1563CB0B32
-  VERSION_STRING                 = 1.0
-  MODULE_TYPE                    = BASE
-  LIBRARY_CLASS                  = NULL
-#
-# The following information is for reference only and not required by the build tools.
-#
-# VALID_ARCHITECTURES = IA32 X64 IPF EBC
-#
-
-[LibraryClasses]
-  BaseLib
-
-[Packages]
-  MdePkg/MdePkg.dec
-  MdeModulePkg/MdeModulePkg.dec
-  UefiCpuPkg/UefiCpuPkg.dec
-  ClientOneSiliconPkg/SiPkg.dec
-
-[Sources]
-  FspPcdListLibNull.c
-
-[Pcd]
-  #
-  # List all the DynamicEx PCDs that FSP will consume.
-  # FSP Dispatch mode bootloader will include this INF to ensure all the PCDs are
-  # built into PCD database.
-  #
-  gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr     ## CONSUMES
-  gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr  ## CONSUMES
-  gEfiMdeModulePkgTokenSpaceGuid.PcdGhcbBase                            ## CONSUMES
-  gEfiMdeModulePkgTokenSpaceGuid.PcdGhcbSize                            ## CONSUMES
-  gUefiCpuPkgTokenSpaceGuid.PcdCpuMaxLogicalProcessorNumber             ## CONSUMES
-  gSiPkgTokenSpaceGuid.PcdSiPciExpressBaseAddress                       ## CONSUMES
-  gSiPkgTokenSpaceGuid.PcdPciExpressRegionLength                        ## CONSUMES
-  gUefiCpuPkgTokenSpaceGuid.PcdCpuMicrocodePatchAddress                 ## CONSUMES
-  gUefiCpuPkgTokenSpaceGuid.PcdCpuMicrocodePatchRegionSize              ## CONSUMES
-  gUefiCpuPkgTokenSpaceGuid.PcdCpuApLoopMode                            ## CONSUMES
-  gUefiCpuPkgTokenSpaceGuid.PcdCpuApTargetCstate                        ## CONSUMES
-  gUefiCpuPkgTokenSpaceGuid.PcdSevEsIsEnabled                           ## CONSUMES
-  gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiS3Enable                        ## CONSUMES
-  gUefiCpuPkgTokenSpaceGuid.PcdCpuS3DataAddress                         ## CONSUMES
-  gUefiCpuPkgTokenSpaceGuid.PcdCpuFeaturesSetting                       ## CONSUMES
-  gUefiCpuPkgTokenSpaceGuid.PcdCpuProcTraceMemSize                      ## CONSUMES
-  gUefiCpuPkgTokenSpaceGuid.PcdCpuProcTraceOutputScheme                 ## CONSUMES
-  gUefiCpuPkgTokenSpaceGuid.PcdCpuFeaturesCapability                    ## CONSUMES

models/addw3/coreboot.config

@@ -19,10 +19,3 @@ CONFIG_SMMSTORE_V2=y
 CONFIG_USE_OPTION_TABLE=y
 CONFIG_VALIDATE_INTEL_DESCRIPTOR=y
 #CONFIG_CONSOLE_SYSTEM76_EC=y
-
-# Custom FSP
-CONFIG_ADD_FSP_BINARIES=y
-CONFIG_FSP_FD_PATH="$(FIRMWARE_OPEN_MODEL_DIR)/AlderLakeFspBinPkg/Fsp.fd"
-CONFIG_FSP_FULL_FD=y
-CONFIG_FSP_HEADER_PATH="$(FIRMWARE_OPEN_MODEL_DIR)/AlderLakeFspBinPkg/Include"
-CONFIG_FSP_USE_REPO=n

models/addw3/edk2.config

@@ -7,7 +7,3 @@ SERIAL_DRIVER_ENABLE=FALSE
 SHELL_TYPE=NONE
 TPM_ENABLE=TRUE
 #SYSTEM76_EC_LOGGING=TRUE
-
-# FMP UUIDs for ESRT
-SYSTEM_FMP_UUID=6f4bb433-7ba2-4665-8793-72583a11ca06
-EC_FMP_UUID=7e1cd184-2ef7-490c-9201-c3229b9361b8

models/addw3/gpio.h

@@ -1,272 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#ifndef MAINBOARD_GPIO_H
-#define MAINBOARD_GPIO_H
-
-#include <soc/gpe.h>
-#include <soc/gpio.h>
-
-#ifndef __ACPI__
-
-/* Pad configuration in ramstage. */
-static const struct pad_config gpio_table[] = {
-	PAD_CFG_NF(GPD0, UP_20K, PWROK, NF1),
-	PAD_CFG_NF(GPD1, NATIVE, PWROK, NF1),
-	PAD_CFG_NF(GPD2, NONE, PWROK, NF1),
-	PAD_CFG_NF(GPD3, UP_20K, PWROK, NF1),
-	PAD_CFG_NF(GPD4, NONE, PWROK, NF1),
-	PAD_CFG_NF(GPD5, NONE, PWROK, NF1),
-	PAD_CFG_NF(GPD6, NONE, PWROK, NF1),
-	PAD_CFG_GPO(GPD7, 0, PWROK),
-	PAD_CFG_NF(GPD8, NONE, PWROK, NF1),
-	PAD_CFG_NF(GPD9, NONE, PWROK, NF1),
-	PAD_CFG_NF(GPD10, NONE, PWROK, NF1),
-	PAD_CFG_NF(GPD11, NONE, PWROK, NF1),
-	_PAD_CFG_STRUCT(GPD12, 0x04000300, 0x0000),
-	PAD_CFG_NF(GPP_A0, UP_20K, DEEP, NF1),
-	PAD_CFG_NF(GPP_A1, UP_20K, DEEP, NF1),
-	PAD_CFG_NF(GPP_A2, UP_20K, DEEP, NF1),
-	PAD_CFG_NF(GPP_A3, UP_20K, DEEP, NF1),
-	PAD_CFG_NF(GPP_A4, UP_20K, DEEP, NF1),
-	PAD_CFG_NF(GPP_A5, DN_20K, DEEP, NF1),
-	PAD_CFG_NF(GPP_A6, NONE, DEEP, NF1),
-	PAD_CFG_NF(GPP_A7, UP_20K, DEEP, NF1),
-	PAD_CFG_NF(GPP_A8, UP_20K, DEEP, NF1),
-	PAD_CFG_NF(GPP_A9, UP_20K, DEEP, NF1),
-	PAD_CFG_NF(GPP_A10, UP_20K, DEEP, NF1),
-	PAD_CFG_NF(GPP_A11, UP_20K, DEEP, NF1),
-	PAD_CFG_NF(GPP_A12, UP_20K, DEEP, NF1),
-	PAD_CFG_NF(GPP_A13, UP_20K, DEEP, NF1),
-	PAD_NC(GPP_A14, NONE),
-	_PAD_CFG_STRUCT(GPP_B0, 0x40100100, 0x0000),
-	PAD_NC(GPP_B1, NONE),
-	PAD_CFG_GPI(GPP_B2, NONE, DEEP),
-	PAD_CFG_GPO(GPP_B3, 1, DEEP),
-	PAD_NC(GPP_B4, NONE),
-	PAD_NC(GPP_B5, NONE),
-	PAD_NC(GPP_B6, NONE),
-	PAD_NC(GPP_B7, NONE),
-	PAD_NC(GPP_B8, NONE),
-	PAD_NC(GPP_B9, NONE),
-	PAD_NC(GPP_B10, NONE),
-	PAD_NC(GPP_B11, NONE),
-	PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1),
-	PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1),
-	PAD_CFG_GPO(GPP_B14, 0, DEEP),
-	PAD_CFG_GPI(GPP_B15, NONE, DEEP),
-	PAD_NC(GPP_B16, NONE),
-	PAD_NC(GPP_B17, NONE),
-	PAD_CFG_NF(GPP_B18, NONE, PWROK, NF1),
-	PAD_CFG_GPO(GPP_B19, 1, DEEP),
-	PAD_CFG_NF(GPP_B20, DN_20K, DEEP, NF1),
-	_PAD_CFG_STRUCT(GPP_B21, 0x42880100, 0x0000),
-	PAD_CFG_GPO(GPP_B22, 1, DEEP),
-	PAD_CFG_GPO(GPP_B23, 0, DEEP),
-	PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1),
-	PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1),
-	PAD_CFG_GPO(GPP_C2, 0, DEEP),
-	PAD_CFG_NF(GPP_C3, NONE, DEEP, NF3),
-	PAD_CFG_NF(GPP_C4, NONE, DEEP, NF3),
-	PAD_CFG_GPO(GPP_C5, 0, DEEP),
-	PAD_CFG_NF(GPP_C6, NONE, DEEP, NF2),
-	PAD_CFG_NF(GPP_C7, NONE, DEEP, NF2),
-	PAD_CFG_GPI(GPP_C8, NONE, DEEP),
-	PAD_NC(GPP_C9, NONE),
-	PAD_CFG_GPO(GPP_C10, 1, DEEP),
-	PAD_CFG_GPO(GPP_C11, 1, DEEP),
-	PAD_NC(GPP_C12, NONE),
-	PAD_NC(GPP_C13, NONE),
-	PAD_NC(GPP_C14, NONE),
-	PAD_NC(GPP_C15, NONE),
-	PAD_CFG_NF(GPP_C16, NONE, DEEP, NF1),
-	PAD_CFG_NF(GPP_C17, NONE, DEEP, NF1),
-	PAD_CFG_NF(GPP_C18, NONE, DEEP, NF1),
-	PAD_CFG_NF(GPP_C19, NONE, DEEP, NF1),
-	PAD_NC(GPP_C20, NONE),
-	PAD_NC(GPP_C21, NONE),
-	PAD_NC(GPP_C22, NONE),
-	PAD_NC(GPP_C23, NONE),
-	PAD_NC(GPP_D0, NONE),
-	PAD_NC(GPP_D1, NONE),
-	PAD_NC(GPP_D2, NONE),
-	PAD_NC(GPP_D3, NONE),
-	PAD_NC(GPP_D4, NONE),
-	PAD_NC(GPP_D5, NONE),
-	PAD_NC(GPP_D6, NONE),
-	PAD_NC(GPP_D7, NONE),
-	PAD_NC(GPP_D8, NONE),
-	PAD_CFG_NF(GPP_D9, NATIVE, DEEP, NF1),
-	PAD_CFG_NF(GPP_D10, NATIVE, DEEP, NF1),
-	PAD_CFG_NF(GPP_D11, NATIVE, DEEP, NF1),
-	PAD_CFG_NF(GPP_D12, NATIVE, DEEP, NF1),
-	PAD_CFG_NF(GPP_D13, NATIVE, DEEP, NF1),
-	PAD_CFG_NF(GPP_D14, NATIVE, DEEP, NF1),
-	PAD_CFG_NF(GPP_D15, NATIVE, DEEP, NF1),
-	PAD_CFG_NF(GPP_D16, NATIVE, DEEP, NF1),
-	PAD_CFG_NF(GPP_D17, NATIVE, DEEP, NF1),
-	PAD_CFG_NF(GPP_D18, NATIVE, DEEP, NF1),
-	PAD_CFG_NF(GPP_D19, NATIVE, DEEP, NF1),
-	PAD_CFG_NF(GPP_D20, NONE, DEEP, NF1),
-	PAD_CFG_NF(GPP_D21, NONE, DEEP, NF1),
-	PAD_CFG_NF(GPP_D22, NONE, DEEP, NF1),
-	PAD_CFG_NF(GPP_D23, NONE, DEEP, NF1),
-	PAD_NC(GPP_E0, NONE),
-	PAD_NC(GPP_E1, NONE),
-	PAD_NC(GPP_E2, NONE),
-	_PAD_CFG_STRUCT(GPP_E3, 0x42840101, 0x0000),
-	PAD_NC(GPP_E4, NONE),
-	PAD_NC(GPP_E5, NONE),
-	PAD_NC(GPP_E6, NONE),
-	_PAD_CFG_STRUCT(GPP_E7, 0x80100100, 0x0000),
-	PAD_CFG_NF(GPP_E8, NONE, DEEP, NF1),
-	PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1),
-	PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1),
-	PAD_CFG_NF(GPP_E11, NONE, DEEP, NF1),
-	PAD_CFG_NF(GPP_E12, NONE, DEEP, NF1),
-	PAD_NC(GPP_E13, NONE),
-	PAD_NC(GPP_E14, NONE),
-	PAD_CFG_GPO(GPP_E15, 0, DEEP),
-	PAD_NC(GPP_E16, NONE),
-	PAD_CFG_GPI(GPP_E17, DN_20K, DEEP),
-	PAD_CFG_GPO(GPP_E18, 1, DEEP),
-	PAD_NC(GPP_E19, NONE),
-	PAD_NC(GPP_E20, NONE),
-	PAD_NC(GPP_E21, NONE),
-	PAD_CFG_NF(GPP_F0, NONE, DEEP, NF2),
-	PAD_NC(GPP_F1, NONE),
-	PAD_CFG_GPO(GPP_F2, 1, PLTRST),
-	PAD_CFG_GPO(GPP_F3, 1, PLTRST),
-	PAD_CFG_GPO(GPP_F4, 1, PLTRST),
-	PAD_CFG_NF(GPP_F5, NONE, DEEP, NF1),
-	PAD_NC(GPP_F6, NONE),
-	PAD_CFG_GPI(GPP_F7, NONE, PLTRST),
-	PAD_CFG_GPI(GPP_F8, NONE, DEEP),
-	PAD_CFG_GPO(GPP_F9, 1, DEEP),
-	PAD_NC(GPP_F10, NONE),
-	PAD_NC(GPP_F11, NONE),
-	PAD_NC(GPP_F12, NONE),
-	PAD_NC(GPP_F13, NONE),
-	PAD_CFG_NF(GPP_F14, NONE, DEEP, NF1),
-	PAD_CFG_GPI(GPP_F15, NONE, DEEP),
-	PAD_NC(GPP_F16, NONE),
-	PAD_CFG_GPI(GPP_F17, NONE, DEEP),
-	PAD_CFG_GPO(GPP_F18, 0, PLTRST),
-	PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1),
-	PAD_CFG_NF(GPP_F20, NONE, DEEP, NF1),
-	PAD_CFG_NF(GPP_F21, NONE, DEEP, NF1),
-	PAD_NC(GPP_F22, NONE),
-	PAD_NC(GPP_F23, NONE),
-	PAD_CFG_GPI(GPP_G0, NONE, DEEP),
-	PAD_CFG_GPI(GPP_G1, NONE, DEEP),
-	PAD_CFG_NF(GPP_G2, DN_20K, DEEP, NF1),
-	PAD_CFG_GPI(GPP_G3, NONE, DEEP),
-	PAD_CFG_GPI(GPP_G4, NONE, DEEP),
-	PAD_CFG_NF(GPP_G5, NONE, DEEP, NF1),
-	PAD_CFG_GPI(GPP_G6, NONE, DEEP),
-	PAD_CFG_GPI(GPP_G7, NONE, DEEP),
-	PAD_NC(GPP_H0, NONE),
-	PAD_CFG_GPI(GPP_H1, NONE, DEEP),
-	PAD_CFG_NF(GPP_H2, NONE, DEEP, NF1),
-	PAD_NC(GPP_H3, NONE),
-	PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1),
-	PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1),
-	PAD_CFG_NF(GPP_H6, NONE, DEEP, NF1),
-	PAD_CFG_NF(GPP_H7, NONE, DEEP, NF1),
-	PAD_CFG_NF(GPP_H8, NONE, DEEP, NF1),
-	PAD_CFG_NF(GPP_H9, NONE, DEEP, NF1),
-	PAD_CFG_NF(GPP_H10, NONE, PLTRST, NF1),
-	PAD_CFG_NF(GPP_H11, NONE, PLTRST, NF1),
-	PAD_CFG_GPO(GPP_H12, 0, DEEP),
-	PAD_CFG_NF(GPP_H13, NONE, PLTRST, NF1),
-	PAD_CFG_NF(GPP_H14, NONE, PLTRST, NF1),
-	PAD_CFG_NF(GPP_H15, NONE, PLTRST, NF1),
-	PAD_CFG_NF(GPP_H16, NONE, PLTRST, NF1),
-	PAD_CFG_GPO(GPP_H17, 1, PLTRST),
-	PAD_CFG_GPO(GPP_H18, 0, DEEP),
-	PAD_NC(GPP_H19, NONE),
-	PAD_NC(GPP_H20, NONE),
-	PAD_CFG_GPO(GPP_H21, 0, DEEP),
-	PAD_CFG_GPO(GPP_H22, 0, DEEP),
-	PAD_NC(GPP_H23, NONE),
-	PAD_CFG_GPI(GPP_I0, NONE, DEEP),
-	PAD_CFG_NF(GPP_I1, NONE, DEEP, NF1),
-	_PAD_CFG_STRUCT(GPP_I2, 0x86800100, 0x0000),
-	PAD_CFG_NF(GPP_I3, NONE, DEEP, NF1),
-	_PAD_CFG_STRUCT(GPP_I4, 0x86800100, 0x0000),
-	PAD_CFG_GPO(GPP_I5, 1, PLTRST),
-	PAD_CFG_GPO(GPP_I6, 0, DEEP),
-	PAD_NC(GPP_I7, NONE),
-	PAD_CFG_GPO(GPP_I8, 0, DEEP),
-	PAD_NC(GPP_I9, NONE),
-	PAD_NC(GPP_I10, NONE),
-	PAD_CFG_NF(GPP_I11, NONE, PLTRST, NF1),
-	PAD_CFG_NF(GPP_I12, NONE, PLTRST, NF1),
-	PAD_CFG_NF(GPP_I13, NONE, PLTRST, NF1),
-	PAD_CFG_NF(GPP_I14, NONE, PLTRST, NF1),
-	PAD_NC(GPP_I15, NONE),
-	PAD_NC(GPP_I16, NONE),
-	PAD_NC(GPP_I17, NONE),
-	PAD_CFG_GPO(GPP_I18, 0, DEEP),
-	PAD_NC(GPP_I19, NONE),
-	PAD_NC(GPP_I20, NONE),
-	PAD_NC(GPP_I21, NONE),
-	PAD_CFG_GPO(GPP_I22, 0, DEEP),
-	PAD_CFG_NF(GPP_J0, NONE, DEEP, NF1),
-	PAD_CFG_NF(GPP_J1, NONE, PLTRST, NF1),
-	PAD_CFG_NF(GPP_J2, NONE, DEEP, NF1),
-	PAD_CFG_NF(GPP_J3, UP_20K, DEEP, NF1),
-	PAD_CFG_NF(GPP_J4, NONE, DEEP, NF1),
-	PAD_CFG_NF(GPP_J5, UP_20K, DEEP, NF1),
-	PAD_CFG_NF(GPP_J6, NONE, DEEP, NF1),
-	PAD_CFG_NF(GPP_J7, NONE, DEEP, NF1),
-	PAD_NC(GPP_J8, NONE),
-	PAD_NC(GPP_J9, NONE),
-	PAD_CFG_NF(GPP_J10, DN_20K, DEEP, NF1),
-	PAD_CFG_NF(GPP_J11, DN_20K, DEEP, NF1),
-	_PAD_CFG_STRUCT(GPP_K0, 0x42800100, 0x0000),
-	PAD_NC(GPP_K1, NONE),
-	PAD_NC(GPP_K2, NONE),
-	PAD_CFG_GPO(GPP_K3, 1, PLTRST),
-	PAD_CFG_GPO(GPP_K4, 0, PWROK),
-	PAD_NC(GPP_K5, NONE),
-	PAD_CFG_NF(GPP_K6, UP_20K, DEEP, NF2),
-	PAD_CFG_NF(GPP_K7, DN_20K, DEEP, NF2),
-	PAD_CFG_NF(GPP_K8, NONE, DEEP, NF1),
-	PAD_CFG_NF(GPP_K9, NONE, DEEP, NF1),
-	PAD_CFG_NF(GPP_K10, UP_20K, DEEP, NF2),
-	PAD_NC(GPP_K11, NONE),
-	PAD_CFG_NF(GPP_R0, NONE, DEEP, NF1),
-	PAD_CFG_NF(GPP_R1, NATIVE, DEEP, NF1),
-	PAD_CFG_NF(GPP_R2, NATIVE, DEEP, NF1),
-	PAD_CFG_NF(GPP_R3, NATIVE, DEEP, NF1),
-	PAD_CFG_NF(GPP_R4, NONE, DEEP, NF1),
-	PAD_NC(GPP_R5, NONE),
-	PAD_NC(GPP_R6, NONE),
-	PAD_NC(GPP_R7, NONE),
-	PAD_CFG_GPI(GPP_R8, NONE, PLTRST),
-	PAD_CFG_NF(GPP_R9, NONE, DEEP, NF1),
-	PAD_NC(GPP_R10, NONE),
-	PAD_NC(GPP_R11, NONE),
-	PAD_NC(GPP_R12, NONE),
-	PAD_NC(GPP_R13, NONE),
-	PAD_NC(GPP_R14, NONE),
-	PAD_NC(GPP_R15, NONE),
-	PAD_CFG_GPO(GPP_R16, 1, DEEP),
-	PAD_NC(GPP_R17, NONE),
-	PAD_NC(GPP_R18, NONE),
-	PAD_NC(GPP_R19, NONE),
-	PAD_NC(GPP_R20, NONE),
-	PAD_CFG_GPO(GPP_R21, 0, DEEP),
-	PAD_NC(GPP_S0, NONE),
-	PAD_NC(GPP_S1, NONE),
-	PAD_NC(GPP_S2, NONE),
-	PAD_NC(GPP_S3, NONE),
-	PAD_NC(GPP_S4, NONE),
-	PAD_NC(GPP_S5, NONE),
-	PAD_CFG_NF(GPP_S6, NONE, DEEP, NF2),
-	PAD_CFG_NF(GPP_S7, NONE, DEEP, NF2),
-};
-
-#endif
-
-#endif

models/addw3/hda_verb.c

@@ -1,48 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#include <device/azalia_device.h>
-
-const u32 cim_verb_data[] = {
-	/* Realtek, ALC256 */
-	0x10ec0256, /* Vendor ID */
-	0x1558a671, /* Subsystem ID */
-	11, /* Number of entries */
-	AZALIA_SUBVENDOR(0, 0x1558a671),
-	AZALIA_PIN_CFG(0, 0x12, 0x90a60130),
-	AZALIA_PIN_CFG(0, 0x13, 0x40000000),
-	AZALIA_PIN_CFG(0, 0x14, 0x90170110),
-	AZALIA_PIN_CFG(0, 0x18, 0x411111f0),
-	AZALIA_PIN_CFG(0, 0x19, 0x411111f0),
-	AZALIA_PIN_CFG(0, 0x1a, 0x411111f0),
-	AZALIA_PIN_CFG(0, 0x1b, 0x02a11040),
-	AZALIA_PIN_CFG(0, 0x1d, 0x41700001),
-	AZALIA_PIN_CFG(0, 0x1e, 0x411111f0),
-	AZALIA_PIN_CFG(0, 0x21, 0x02211020),
-	/* Intel, RaptorlakeHDMI */
-	0x80862818, /* Vendor ID */
-	0x80860101, /* Subsystem ID */
-	10, /* Number of entries */
-	AZALIA_SUBVENDOR(2, 0x80860101),
-	AZALIA_PIN_CFG(2, 0x04, 0x18560010),
-	AZALIA_PIN_CFG(2, 0x06, 0x18560010),
-	AZALIA_PIN_CFG(2, 0x08, 0x18560010),
-	AZALIA_PIN_CFG(2, 0x0a, 0x18560010),
-	AZALIA_PIN_CFG(2, 0x0b, 0x18560010),
-	AZALIA_PIN_CFG(2, 0x0c, 0x18560010),
-	AZALIA_PIN_CFG(2, 0x0d, 0x18560010),
-	AZALIA_PIN_CFG(2, 0x0e, 0x18560010),
-	AZALIA_PIN_CFG(2, 0x0f, 0x18560010),
-	/* Nvidia, GenericHDMI */
-	0x10de00a6, /* Vendor ID */
-	0x10de0000, /* Subsystem ID */
-	5, /* Number of entries */
-	AZALIA_SUBVENDOR(0, 0x10de0000),
-	AZALIA_PIN_CFG(0, 0x04, 0x185600f0),
-	AZALIA_PIN_CFG(0, 0x05, 0x585600f0),
-	AZALIA_PIN_CFG(0, 0x06, 0x185600f0),
-	AZALIA_PIN_CFG(0, 0x07, 0x585600f0),
-};
-
-const u32 pc_beep_verbs[] = {};
-
-AZALIA_ARRAY_SIZES;

models/addw4/IntelGopDriver.inf

@@ -0,0 +1,9 @@
+[Defines]
+  INF_VERSION                    = 0x00010005
+  BASE_NAME                      = IntelGopDriver
+  FILE_GUID                      = 767222f4-a9f4-41ba-9faa-edaa1405a486
+  MODULE_TYPE                    = UEFI_DRIVER
+  VERSION_STRING                 = 1.0
+
+[Binaries.X64]
+  PE32|IntelGopDriver.efi|*

models/addw4/README.md

@@ -0,0 +1,12 @@
+# System76 Adder WS (addw4)
+
+## Contents
+
+- [EC](./ec.rom)
+  - *Read Error: No such file or directory (os error 2)*
+- [FD](./fd.rom)
+  - Size: 4 KB
+  - HAP: false
+- [ME](./me.rom)
+  - Size: 3944 KB
+  - Version: 16.1.30.2330

models/addw4/README.md.in

@@ -0,0 +1 @@
+# System76 Adder WS (addw4)

models/addw4/chip.txt

@@ -0,0 +1 @@
+GD25Q256D

models/addw4/coreboot-collector.txt

@@ -0,0 +1,326 @@
+## PCI ##
+PCI Device: 0000:00:00.0: Class 0x00060000, Vendor 0x8086, Device 0xA702, Revision 0x01
+PCI Device: 0000:00:01.0: Class 0x00060400, Vendor 0x8086, Device 0xA70D, Revision 0x01
+PCI Device: 0000:00:02.0: Class 0x00030000, Vendor 0x8086, Device 0xA788, Revision 0x04
+PCI Device: 0000:00:04.0: Class 0x00118000, Vendor 0x8086, Device 0xA71D, Revision 0x01
+PCI Device: 0000:00:08.0: Class 0x00088000, Vendor 0x8086, Device 0xA74F, Revision 0x01
+PCI Device: 0000:00:0a.0: Class 0x00118000, Vendor 0x8086, Device 0xA77D, Revision 0x01
+PCI Device: 0000:00:0e.0: Class 0x00010400, Vendor 0x8086, Device 0xA77F, Revision 0x00
+PCI Device: 0000:00:14.0: Class 0x000C0330, Vendor 0x8086, Device 0x7A60, Revision 0x11
+PCI Device: 0000:00:14.2: Class 0x00050000, Vendor 0x8086, Device 0x7A27, Revision 0x11
+PCI Device: 0000:00:14.3: Class 0x00028000, Vendor 0x8086, Device 0x7A70, Revision 0x11
+PCI Device: 0000:00:15.0: Class 0x000C8000, Vendor 0x8086, Device 0x7A4C, Revision 0x11
+PCI Device: 0000:00:15.1: Class 0x000C8000, Vendor 0x8086, Device 0x7A4D, Revision 0x11
+PCI Device: 0000:00:15.3: Class 0x000C8000, Vendor 0x8086, Device 0x7A4F, Revision 0x11
+PCI Device: 0000:00:16.0: Class 0x00078000, Vendor 0x8086, Device 0x7A68, Revision 0x11
+PCI Device: 0000:00:1c.0: Class 0x00060400, Vendor 0x8086, Device 0x7A3A, Revision 0x11
+PCI Device: 0000:00:1f.0: Class 0x00060100, Vendor 0x8086, Device 0x7A0C, Revision 0x11
+PCI Device: 0000:00:1f.3: Class 0x00040380, Vendor 0x8086, Device 0x7A50, Revision 0x11
+PCI Device: 0000:00:1f.4: Class 0x000C0500, Vendor 0x8086, Device 0x7A23, Revision 0x11
+PCI Device: 0000:00:1f.5: Class 0x000C8000, Vendor 0x8086, Device 0x7A24, Revision 0x11
+PCI Device: 0000:01:00.0: Class 0x00030000, Vendor 0x10DE, Device 0x2820, Revision 0xA1
+PCI Device: 0000:01:00.1: Class 0x00040300, Vendor 0x10DE, Device 0x22BD, Revision 0xA1
+PCI Device: 0000:02:00.0: Class 0x00020000, Vendor 0x10EC, Device 0x8168, Revision 0x15
+PCI Device: 10000:e0:1d.0: Class 0x00088000, Vendor 0x8086, Device 0x09AB, Revision 0x00
+PCI Device: 10000:e0:1d.4: Class 0x00060400, Vendor 0x8086, Device 0x7A34, Revision 0x11
+PCI Device: 10000:e1:00.0: Class 0x00010802, Vendor 0x144D, Device 0xA80A, Revision 0x00
+## GPIO ##
+600 Series PCH
+GPP_I0 (0x6E,0x00) 0x84000200 0x00000018 0x00000000 0x00000000
+GPP_I1 (0x6E,0x02) 0x82000500 0x00000019 0x00000000 0x00000000
+GPP_I2 (0x6E,0x04) 0x86880100 0x0000001a 0x00000000 0x00000000
+GPP_I3 (0x6E,0x06) 0x82000502 0x0000001b 0x00000000 0x00000000
+GPP_I4 (0x6E,0x08) 0x84000200 0x0000001c 0x00000000 0x00000000
+GPP_I5 (0x6E,0x0A) 0x44000200 0x0000001d 0x00000000 0x00000000
+GPP_I6 (0x6E,0x0C) 0x44000200 0x0000001e 0x00000000 0x00000000
+GPP_I7 (0x6E,0x0E) 0x44000200 0x00000020 0x00000000 0x00000000
+GPP_I8 (0x6E,0x10) 0x44000102 0x00000021 0x00000000 0x00000000
+GPP_I9 (0x6E,0x12) 0x44000200 0x00000022 0x00000000 0x00000000
+GPP_I10 (0x6E,0x14) 0x44000200 0x00000023 0x00000000 0x00000000
+GPP_I11 (0x6E,0x16) 0x44000102 0x00000024 0x00000000 0x00000000
+GPP_I12 (0x6E,0x18) 0x44000102 0x00000025 0x00000000 0x00000000
+GPP_I13 (0x6E,0x1A) 0x44000902 0x00000026 0x00000000 0x00000000
+GPP_I14 (0x6E,0x1C) 0x44000902 0x00000027 0x00000000 0x00000000
+GPP_I15 (0x6E,0x1E) 0x44000200 0x00000028 0x00000000 0x00000000
+GPP_I16 (0x6E,0x20) 0x44000200 0x00000029 0x00000000 0x00000000
+GPP_I17 (0x6E,0x22) 0x44000200 0x0000002a 0x00000000 0x00000000
+GPP_I18 (0x6E,0x24) 0x44000200 0x0000002b 0x00000000 0x00000000
+GPP_I19 (0x6E,0x26) 0x44000200 0x0000002c 0x00000000 0x00000000
+GPP_I20 (0x6E,0x28) 0x44000200 0x0000002d 0x00000000 0x00000000
+GPP_I21 (0x6E,0x2A) 0x44000200 0x0000002e 0x00000000 0x00000000
+GPP_I22 (0x6E,0x2C) 0x44000200 0x00000030 0x00000000 0x00000000
+GPP_R0 (0x6E,0x32) 0x44000600 0x00000031 0x00000000 0x00000000
+GPP_R1 (0x6E,0x34) 0x44000600 0x00003c32 0x00000000 0x00000000
+GPP_R2 (0x6E,0x36) 0x44000600 0x00003c33 0x00000000 0x00000000
+GPP_R3 (0x6E,0x38) 0x44000500 0x00003c34 0x00000000 0x00000000
+GPP_R4 (0x6E,0x3A) 0x44000600 0x00000035 0x00000000 0x00000000
+GPP_R5 (0x6E,0x3C) 0x44000200 0x00000036 0x00000000 0x00000000
+GPP_R6 (0x6E,0x3E) 0x44000200 0x00000037 0x00000000 0x00000000
+GPP_R7 (0x6E,0x40) 0x44000200 0x00000038 0x00000000 0x00000000
+GPP_R8 (0x6E,0x42) 0x44000100 0x00000039 0x00000000 0x00000000
+GPP_R9 (0x6E,0x44) 0x44000702 0x0000003a 0x00000000 0x00000000
+GPP_R10 (0x6E,0x46) 0x44000200 0x0000003b 0x00000000 0x00000000
+GPP_R11 (0x6E,0x48) 0x44000200 0x0000003c 0x00000000 0x00000000
+GPP_R12 (0x6E,0x4A) 0x44000200 0x0000003d 0x00000000 0x00000000
+GPP_R13 (0x6E,0x4C) 0x44000200 0x0000003e 0x00000000 0x00000000
+GPP_R14 (0x6E,0x4E) 0x44000200 0x0000003f 0x00000000 0x00000000
+GPP_R15 (0x6E,0x50) 0x44000200 0x00000040 0x00000000 0x00000000
+GPP_R16 (0x6E,0x52) 0x44000200 0x00000041 0x00000000 0x00000000
+GPP_R17 (0x6E,0x54) 0x44000200 0x00000042 0x00000000 0x00000000
+GPP_R18 (0x6E,0x56) 0x44000200 0x00000043 0x00000000 0x00000000
+GPP_R19 (0x6E,0x58) 0x44000102 0x00000044 0x00000000 0x00000000
+GPP_R20 (0x6E,0x5A) 0x44000200 0x00000045 0x00000000 0x00000000
+GPP_R21 (0x6E,0x5C) 0x44000200 0x00000046 0x00000000 0x00000000
+GPP_J0 (0x6E,0x60) 0x44000500 0x00000047 0x00000000 0x00000000
+GPP_J1 (0x6E,0x62) 0x44000700 0x00000048 0x00000000 0x00000000
+GPP_J2 (0x6E,0x64) 0x44000500 0x00000049 0x00000000 0x00000000
+GPP_J3 (0x6E,0x66) 0x44000502 0x0000304a 0x00000000 0x00000000
+GPP_J4 (0x6E,0x68) 0x44000500 0x0000004b 0x00000000 0x00000000
+GPP_J5 (0x6E,0x6A) 0x44000500 0x0000304c 0x00000000 0x00000000
+GPP_J6 (0x6E,0x6C) 0x44000500 0x0000004d 0x00000000 0x00000000
+GPP_J7 (0x6E,0x6E) 0x44000500 0x0000004e 0x00000000 0x00000000
+GPP_J8 (0x6E,0x70) 0x44000102 0x00000050 0x00000000 0x00000000
+GPP_J9 (0x6E,0x72) 0x44000200 0x00000051 0x00000000 0x00000000
+GPP_J10 (0x6E,0x74) 0x44000200 0x00000052 0x00000000 0x00000000
+GPP_J11 (0x6E,0x76) 0x44000200 0x00000053 0x00000000 0x00000000
+GPP_B0 (0x6D,0x00) 0x40100102 0x00003050 0x00000000 0x00000000
+GPP_B1 (0x6D,0x02) 0x44000102 0x00000051 0x00000000 0x00000000
+GPP_B2 (0x6D,0x04) 0x44000102 0x00000052 0x00000000 0x00000000
+GPP_B3 (0x6D,0x06) 0x84000201 0x00000053 0x00000000 0x00000000
+GPP_B4 (0x6D,0x08) 0x44000200 0x00000054 0x00000000 0x00000000
+GPP_B5 (0x6D,0x0A) 0x44000200 0x00000055 0x00000000 0x00000000
+GPP_B6 (0x6D,0x0C) 0x44000200 0x00000056 0x00000000 0x00000000
+GPP_B7 (0x6D,0x0E) 0x44000200 0x00000057 0x00000000 0x00000000
+GPP_B8 (0x6D,0x10) 0x44000200 0x00000058 0x00000000 0x00000000
+GPP_B9 (0x6D,0x12) 0x44000200 0x00000059 0x00000000 0x00000000
+GPP_B10 (0x6D,0x14) 0x44000200 0x0000005a 0x00000000 0x00000000
+GPP_B11 (0x6D,0x16) 0x44000200 0x0000005b 0x00000000 0x00000000
+GPP_B12 (0x6D,0x18) 0x44000200 0x0000005c 0x00000000 0x00000000
+GPP_B13 (0x6D,0x1A) 0x44000700 0x0000005d 0x00000000 0x00000000
+GPP_B14 (0x6D,0x1C) 0x44000500 0x0000005e 0x00000000 0x00000000
+GPP_B15 (0x6D,0x1E) 0x44000200 0x0000005f 0x00000000 0x00000000
+GPP_B16 (0x6D,0x20) 0x44000200 0x00000060 0x00000000 0x00000000
+GPP_B17 (0x6D,0x22) 0x44000200 0x00000061 0x00000000 0x00000000
+GPP_B18 (0x6D,0x24) 0x04000702 0x00000062 0x00000000 0x00000000
+GPP_B19 (0x6D,0x26) 0x44000201 0x00000063 0x00000000 0x00000000
+GPP_B20 (0x6D,0x28) 0x44000200 0x00000064 0x00000000 0x00000000
+GPP_B21 (0x6D,0x2A) 0x44000200 0x00000065 0x00000000 0x00000000
+GPP_B22 (0x6D,0x2C) 0x44000200 0x00000066 0x00000000 0x00000000
+GPP_B23 (0x6D,0x2E) 0x44000102 0x00000067 0x00000800 0x00000000
+GPP_G0 (0x6D,0x30) 0x44000200 0x00000068 0x00000000 0x00000000
+GPP_G1 (0x6D,0x32) 0x44000200 0x00000069 0x00000000 0x00000000
+GPP_G2 (0x6D,0x34) 0x44000200 0x0000006a 0x00000000 0x00000000
+GPP_G3 (0x6D,0x36) 0x44000102 0x0000006b 0x00000000 0x00000000
+GPP_G4 (0x6D,0x38) 0x44000102 0x0000006c 0x00000000 0x00000000
+GPP_G5 (0x6D,0x3A) 0x44000600 0x0000006d 0x00000000 0x00000000
+GPP_G6 (0x6D,0x3C) 0x44000100 0x0000006e 0x00000000 0x00000000
+GPP_G7 (0x6D,0x3E) 0x44000100 0x0000006f 0x00000000 0x00000000
+GPP_H0 (0x6D,0x40) 0x44000102 0x00000070 0x00000000 0x00000000
+GPP_H1 (0x6D,0x42) 0x44000200 0x00000071 0x00000000 0x00000000
+GPP_H2 (0x6D,0x44) 0x44000102 0x00000072 0x00000000 0x00000000
+GPP_H3 (0x6D,0x46) 0x44000300 0x00000073 0x00000000 0x00000000
+GPP_H4 (0x6D,0x48) 0x44000700 0x00000074 0x00000000 0x00000000
+GPP_H5 (0x6D,0x4A) 0x44000702 0x00000075 0x00000000 0x00000000
+GPP_H6 (0x6D,0x4C) 0x44000702 0x00000076 0x00000000 0x00000000
+GPP_H7 (0x6D,0x4E) 0x44000700 0x00000077 0x00000000 0x00000000
+GPP_H8 (0x6D,0x50) 0x44000702 0x00000018 0x00000000 0x00000000
+GPP_H9 (0x6D,0x52) 0x44000700 0x00000019 0x00000000 0x00000000
+GPP_H10 (0x6D,0x54) 0x44000200 0x00000020 0x00000000 0x00000000
+GPP_H11 (0x6D,0x56) 0x44000200 0x00000021 0x00000000 0x00000000
+GPP_H12 (0x6D,0x58) 0x44000200 0x00000022 0x00000000 0x00000000
+GPP_H13 (0x6D,0x5A) 0x44000200 0x00000023 0x00000000 0x00000000
+GPP_H14 (0x6D,0x5C) 0x44000200 0x00000024 0x00000000 0x00000000
+GPP_H15 (0x6D,0x5E) 0x44000200 0x00000025 0x00000000 0x00000000
+GPP_H16 (0x6D,0x60) 0x44000200 0x00000026 0x00000000 0x00000000
+GPP_H17 (0x6D,0x62) 0x44000200 0x00000027 0x00000000 0x00000000
+GPP_H18 (0x6D,0x64) 0x44000200 0x00000028 0x00000000 0x00000000
+GPP_H19 (0x6D,0x66) 0x44000200 0x00000029 0x00000000 0x00000000
+GPP_H20 (0x6D,0x68) 0x44000200 0x0000002a 0x00000000 0x00000000
+GPP_H21 (0x6D,0x6A) 0x44000200 0x0000002b 0x00000000 0x00000000
+GPP_H22 (0x6D,0x6C) 0x44000200 0x0000002c 0x00000000 0x00000000
+GPP_H23 (0x6D,0x6E) 0x44000200 0x0000002d 0x00000000 0x00000000
+GPD0 (0x6C,0x00) 0x04000702 0x00003060 0x00000000 0x00000000
+GPD1 (0x6C,0x02) 0x04000702 0x00003c61 0x00000000 0x00000000
+GPD2 (0x6C,0x04) 0x44000200 0x00000062 0x00000000 0x00000000
+GPD3 (0x6C,0x06) 0x04000702 0x00003063 0x00000010 0x00000000
+GPD4 (0x6C,0x08) 0x04000600 0x00000064 0x00000000 0x00000000
+GPD5 (0x6C,0x0A) 0x04000600 0x00000065 0x00000000 0x00000000
+GPD6 (0x6C,0x0C) 0x44000600 0x00000066 0x00000000 0x00000000
+GPD7 (0x6C,0x0E) 0x44000200 0x00000067 0x00000800 0x00000000
+GPD8 (0x6C,0x10) 0x04000700 0x00000068 0x00000000 0x00000000
+GPD9 (0x6C,0x12) 0x04000200 0x00000069 0x00000000 0x00000000
+GPD10 (0x6C,0x14) 0x44000600 0x0000006a 0x00000000 0x00000000
+GPD11 (0x6C,0x16) 0x44000200 0x0000006b 0x00000000 0x00000000
+GPD12 (0x6C,0x18) 0x44000200 0x0000006c 0x00000000 0x00000000
+GPP_A0 (0x6B,0x12) 0x44000700 0x00003018 0x00000000 0x00000000
+GPP_A1 (0x6B,0x14) 0x44000702 0x00003019 0x00000000 0x00000000
+GPP_A2 (0x6B,0x16) 0x44000700 0x00003020 0x00000000 0x00000000
+GPP_A3 (0x6B,0x18) 0x44000700 0x00003021 0x00000000 0x00000000
+GPP_A4 (0x6B,0x1A) 0x44000700 0x00003022 0x00000000 0x00000000
+GPP_A5 (0x6B,0x1C) 0x44000700 0x00001023 0x00000000 0x00000000
+GPP_A6 (0x6B,0x1E) 0x44000700 0x00000024 0x00000000 0x00000000
+GPP_A7 (0x6B,0x20) 0x44000200 0x00000025 0x00000000 0x00000000
+GPP_A8 (0x6B,0x22) 0x44000200 0x00000026 0x00000000 0x00000000
+GPP_A9 (0x6B,0x24) 0x44000200 0x00000027 0x00000000 0x00000000
+GPP_A10 (0x6B,0x26) 0x44000702 0x00003028 0x00000000 0x00000000
+GPP_A11 (0x6B,0x28) 0x44000102 0x00003029 0x00000000 0x00000000
+GPP_A12 (0x6B,0x2A) 0x44000200 0x0000002a 0x00000000 0x00000000
+GPP_A13 (0x6B,0x2C) 0x44000200 0x0000002b 0x00000000 0x00000000
+GPP_A14 (0x6B,0x2E) 0x44000200 0x0000002c 0x00000000 0x00000000
+GPP_C0 (0x6B,0x32) 0x44000502 0x0000002d 0x00000000 0x00000000
+GPP_C1 (0x6B,0x34) 0x44000502 0x0000002e 0x00000000 0x00000000
+GPP_C2 (0x6B,0x36) 0x44000102 0x0000002f 0x00000800 0x00000000
+GPP_C3 (0x6B,0x38) 0x44000d02 0x00000030 0x00000000 0x00000000
+GPP_C4 (0x6B,0x3A) 0x44000d02 0x00000031 0x00000000 0x00000000
+GPP_C5 (0x6B,0x3C) 0x44000200 0x00000032 0x00000000 0x00000000
+GPP_C6 (0x6B,0x3E) 0x44000902 0x00000033 0x00000000 0x00000000
+GPP_C7 (0x6B,0x40) 0x44000902 0x00000034 0x00000000 0x00000000
+GPP_C8 (0x6B,0x42) 0x44000102 0x00000035 0x00000000 0x00000000
+GPP_C9 (0x6B,0x44) 0x44000200 0x00000036 0x00000000 0x00000000
+GPP_C10 (0x6B,0x46) 0x44000200 0x00000037 0x00000000 0x00000000
+GPP_C11 (0x6B,0x48) 0x44000200 0x00000038 0x00000000 0x00000000
+GPP_C12 (0x6B,0x4A) 0x44000200 0x00000039 0x00000000 0x00000000
+GPP_C13 (0x6B,0x4C) 0x44000200 0x0000003a 0x00000000 0x00000000
+GPP_C14 (0x6B,0x4E) 0x44000200 0x0000003b 0x00000000 0x00000000
+GPP_C15 (0x6B,0x50) 0x44000200 0x0000003c 0x00000000 0x00000000
+GPP_C16 (0x6B,0x52) 0x44000502 0x0000003d 0x00000000 0x00000000
+GPP_C17 (0x6B,0x54) 0x44000502 0x0000003e 0x00000000 0x00000000
+GPP_C18 (0x6B,0x56) 0x44000502 0x0000003f 0x00000000 0x00000000
+GPP_C19 (0x6B,0x58) 0x44000502 0x00000040 0x00000000 0x00000000
+GPP_C20 (0x6B,0x5A) 0x44000200 0x00000041 0x00000000 0x00000000
+GPP_C21 (0x6B,0x5C) 0x44000200 0x00000042 0x00000000 0x00000000
+GPP_C22 (0x6B,0x5E) 0x44000200 0x00000043 0x00000000 0x00000000
+GPP_C23 (0x6B,0x60) 0x44000200 0x00000044 0x00000000 0x00000000
+GPP_S0 (0x6A,0x00) 0x44000200 0x01800030 0x00000000 0x00000000
+GPP_S1 (0x6A,0x02) 0x44000200 0x01800031 0x00000000 0x00000000
+GPP_S2 (0x6A,0x04) 0x44000200 0x01800032 0x00000000 0x00000000
+GPP_S3 (0x6A,0x06) 0x44000200 0x01800033 0x00000000 0x00000000
+GPP_S4 (0x6A,0x08) 0x44000a00 0x01800034 0x00000000 0x00000000
+GPP_S5 (0x6A,0x0A) 0x44000900 0x01800035 0x00000000 0x00000000
+GPP_S6 (0x6A,0x0C) 0x44000200 0x01800036 0x00000000 0x00000000
+GPP_S7 (0x6A,0x0E) 0x44000200 0x01800037 0x00000000 0x00000000
+GPP_E0 (0x6A,0x10) 0x44000200 0x00000038 0x00000000 0x00000000
+GPP_E1 (0x6A,0x12) 0x44000200 0x00000039 0x00000000 0x00000000
+GPP_E2 (0x6A,0x14) 0x44000102 0x0000003a 0x00000000 0x00000000
+GPP_E3 (0x6A,0x16) 0x44000102 0x0000003b 0x00000000 0x00000000
+GPP_E4 (0x6A,0x18) 0x44000200 0x0000003c 0x00000000 0x00000000
+GPP_E5 (0x6A,0x1A) 0x44000200 0x0000003d 0x00000000 0x00000000
+GPP_E6 (0x6A,0x1C) 0x44000200 0x0000003e 0x00000000 0x00000000
+GPP_E7 (0x6A,0x1E) 0x80100102 0x0000003f 0x00000000 0x00000000
+GPP_E8 (0x6A,0x20) 0x44000600 0x00000040 0x00000000 0x00000000
+GPP_E9 (0x6A,0x22) 0x44000102 0x00000041 0x00000800 0x00000000
+GPP_E10 (0x6A,0x24) 0x44000102 0x00000042 0x00000800 0x00000000
+GPP_E11 (0x6A,0x26) 0x44000102 0x00000043 0x00000800 0x00000000
+GPP_E12 (0x6A,0x28) 0x44000102 0x00000044 0x00000000 0x00000000
+GPP_E13 (0x6A,0x2A) 0x44000200 0x00000045 0x00000000 0x00000000
+GPP_E14 (0x6A,0x2C) 0x44000200 0x00000046 0x00000000 0x00000000
+GPP_E15 (0x6A,0x2E) 0x44000200 0x00000047 0x00000000 0x00000000
+GPP_E16 (0x6A,0x30) 0x44000200 0x00000048 0x00000000 0x00000000
+GPP_E17 (0x6A,0x32) 0x44000102 0x00000049 0x00000000 0x00000000
+GPP_E18 (0x6A,0x34) 0x44000201 0x0000004a 0x00000000 0x00000000
+GPP_E19 (0x6A,0x36) 0x44000200 0x0000004b 0x00000000 0x00000000
+GPP_E20 (0x6A,0x38) 0x44000200 0x0000004c 0x00000000 0x00000000
+GPP_E21 (0x6A,0x3A) 0x44000200 0x0000004d 0x00000000 0x00000000
+GPP_K0 (0x6A,0x3E) 0x42800102 0x0000004e 0x00000000 0x00000000
+GPP_K1 (0x6A,0x40) 0x44000200 0x00000050 0x00000000 0x00000000
+GPP_K2 (0x6A,0x42) 0x44000200 0x00000051 0x00000000 0x00000000
+GPP_K3 (0x6A,0x44) 0x84000201 0x00000052 0x00000000 0x00000000
+GPP_K4 (0x6A,0x46) 0x44000200 0x00003053 0x00000000 0x00000000
+GPP_K5 (0x6A,0x48) 0x44000200 0x00000054 0x00000000 0x00000000
+GPP_K6 (0x6A,0x4A) 0x44000a02 0x00000055 0x00000000 0x00000000
+GPP_K7 (0x6A,0x4C) 0x44000a02 0x00000056 0x00000000 0x00000000
+GPP_K8 (0x6A,0x4E) 0x44000700 0x00000057 0x00000000 0x00000000
+GPP_K9 (0x6A,0x50) 0x44000700 0x00000058 0x00000000 0x00000000
+GPP_K10 (0x6A,0x52) 0x44000a02 0x00000059 0x00000000 0x00000000
+GPP_K11 (0x6A,0x54) 0x44000200 0x0000005a 0x00000000 0x00000000
+GPP_F0 (0x6A,0x5C) 0x44000300 0x0000005b 0x00000000 0x00000000
+GPP_F1 (0x6A,0x5E) 0x44000200 0x0000005c 0x00000000 0x00000000
+GPP_F2 (0x6A,0x60) 0x44000200 0x0000005d 0x00000000 0x00000000
+GPP_F3 (0x6A,0x62) 0x44000200 0x0000005e 0x00000000 0x00000000
+GPP_F4 (0x6A,0x64) 0x44000200 0x00000060 0x00000000 0x00000000
+GPP_F5 (0x6A,0x66) 0x44000300 0x00000061 0x00000000 0x00000000
+GPP_F6 (0x6A,0x68) 0x44000200 0x00000062 0x00000000 0x00000000
+GPP_F7 (0x6A,0x6A) 0x80100100 0x00000063 0x00000000 0x00000000
+GPP_F8 (0x6A,0x6C) 0x84000100 0x00000064 0x00000000 0x00000000
+GPP_F9 (0x6A,0x6E) 0x44000200 0x00000065 0x00000000 0x00000000
+GPP_F10 (0x6A,0x70) 0x44000102 0x00000066 0x00000000 0x00000000
+GPP_F11 (0x6A,0x72) 0x44000200 0x00000067 0x00000000 0x00000000
+GPP_F12 (0x6A,0x74) 0x44000200 0x00000068 0x00000000 0x00000000
+GPP_F13 (0x6A,0x76) 0x44000200 0x00000069 0x00000000 0x00000000
+GPP_F14 (0x6A,0x78) 0x44000200 0x0000006a 0x00000000 0x00000000
+GPP_F15 (0x6A,0x7A) 0x44000100 0x0000006b 0x00000000 0x00000000
+GPP_F16 (0x6A,0x7C) 0x80100100 0x0000006c 0x00000000 0x00000000
+GPP_F17 (0x6A,0x7E) 0x44000102 0x0000006d 0x00000000 0x00000000
+GPP_F18 (0x6A,0x80) 0x44000200 0x0000006e 0x00000000 0x00000000
+GPP_F19 (0x6A,0x82) 0x44000700 0x0000006f 0x00000000 0x00000000
+GPP_F20 (0x6A,0x84) 0x44000700 0x00000070 0x00000000 0x00000000
+GPP_F21 (0x6A,0x86) 0x44000700 0x00000071 0x00000000 0x00000000
+GPP_F22 (0x6A,0x88) 0x44000200 0x00000072 0x00000000 0x00000000
+GPP_F23 (0x6A,0x8A) 0x44000200 0x00000073 0x00000000 0x00000000
+GPP_D0 (0x69,0x20) 0x44000200 0x00000026 0x00000000 0x00000000
+GPP_D1 (0x69,0x22) 0x44000200 0x00000027 0x00000000 0x00000000
+GPP_D2 (0x69,0x24) 0x44000200 0x00000028 0x00000000 0x00000000
+GPP_D3 (0x69,0x26) 0x44000200 0x00000029 0x00000000 0x00000000
+GPP_D4 (0x69,0x28) 0x44000200 0x0000002a 0x00000000 0x00000000
+GPP_D5 (0x69,0x2A) 0x44000200 0x0000002b 0x00000000 0x00000000
+GPP_D6 (0x69,0x2C) 0x44000200 0x0000002c 0x00000000 0x00000000
+GPP_D7 (0x69,0x2E) 0x44000200 0x0000002d 0x00000000 0x00000000
+GPP_D8 (0x69,0x30) 0x40000300 0x00000000 0x00000000 0x00000000
+GPP_D9 (0x69,0x32) 0x40000702 0x00003c00 0x00000000 0x00000000
+GPP_D10 (0x69,0x34) 0x40000700 0x00003c00 0x00000000 0x00000000
+GPP_D11 (0x69,0x36) 0x40000700 0x00003c00 0x00000000 0x00000000
+GPP_D12 (0x69,0x38) 0x40000702 0x00003c00 0x00000000 0x00000000
+GPP_D13 (0x69,0x3A) 0x40000702 0x00003c00 0x00000000 0x00000000
+GPP_D14 (0x69,0x3C) 0x40000702 0x00003c00 0x00000000 0x00000000
+GPP_D15 (0x69,0x3E) 0x40000700 0x00003c00 0x00000000 0x00000000
+GPP_D16 (0x69,0x40) 0x40000700 0x00003c00 0x00000800 0x00000000
+GPP_D17 (0x69,0x42) 0x40000700 0x00003c00 0x00000000 0x00000000
+GPP_D18 (0x69,0x44) 0x40000700 0x00003c00 0x00000000 0x00000000
+GPP_D19 (0x69,0x46) 0x40000700 0x00003c00 0x00000000 0x00000000
+GPP_D20 (0x69,0x48) 0x40000700 0x00000000 0x00000000 0x00000000
+GPP_D21 (0x69,0x4A) 0x40000700 0x00000000 0x00000000 0x00000000
+GPP_D22 (0x69,0x4C) 0x40000700 0x00000000 0x00000000 0x00000000
+GPP_D23 (0x69,0x4E) 0x40000700 0x00000000 0x00000000 0x00000000
+## HDAUDIO ##
+hdaudioC0D0
+  vendor_name: Realtek
+  chip_name: ALC245
+  vendor_id: 0x10ec0245
+  subsystem_id: 0x15580353
+  revision_id: 0x100001
+  0x12: 0x90a60130
+  0x13: 0x40000000
+  0x14: 0x90170110
+  0x17: 0x411111f0
+  0x18: 0x411111f0
+  0x19: 0x411111f0
+  0x1a: 0x411111f0
+  0x1b: 0x411111f0
+  0x1d: 0x40689b2d
+  0x1e: 0x411111f0
+  0x21: 0x04211020
+hdaudioC0D2
+  vendor_name: Intel
+  chip_name: Raptorlake HDMI
+  vendor_id: 0x80862818
+  subsystem_id: 0x80860101
+  revision_id: 0x100000
+  0x04: 0x18560010
+  0x06: 0x18560010
+  0x08: 0x18560010
+  0x0a: 0x18560010
+  0x0b: 0x18560010
+  0x0c: 0x18560010
+  0x0d: 0x18560010
+  0x0e: 0x18560010
+  0x0f: 0x18560010
+hdaudioC1D0
+  vendor_name: Nvidia
+  chip_name: GPU a6 HDMI/DP
+  vendor_id: 0x10de00a6
+  subsystem_id: 0x10de0000
+  revision_id: 0x100100
+  0x04: 0x185600f0
+  0x05: 0x585600f0
+  0x06: 0x585600f0
+  0x07: 0x585600f0

models/addw4/coreboot.config

@@ -0,0 +1,19 @@
+CONFIG_VENDOR_SYSTEM76=y
+CONFIG_BOARD_SYSTEM76_ADDW4=y
+CONFIG_CCACHE=y
+CONFIG_CONSOLE_SERIAL=n
+CONFIG_CPU_MICROCODE_CBFS_DEFAULT_BINS=y
+CONFIG_HAVE_IFD_BIN=y
+CONFIG_HAVE_ME_BIN=y
+CONFIG_IFD_BIN_PATH="$(FIRMWARE_OPEN_MODEL_DIR)/fd.rom"
+CONFIG_ME_BIN_PATH="$(FIRMWARE_OPEN_MODEL_DIR)/me.rom"
+CONFIG_PAYLOAD_ELF=y
+CONFIG_PAYLOAD_FILE="$(FIRMWARE_OPEN_UEFIPAYLOAD)"
+CONFIG_PCIEXP_HOTPLUG_MEM=0x2000000
+CONFIG_PCIEXP_HOTPLUG_PREFETCH_MEM=0x20000000
+CONFIG_POST_IO=n
+CONFIG_SMMSTORE=y
+CONFIG_SMMSTORE_V2=y
+CONFIG_USE_OPTION_TABLE=y
+CONFIG_VALIDATE_INTEL_DESCRIPTOR=y
+#CONFIG_CONSOLE_SYSTEM76_EC=y

models/addw4/ec.config

@@ -0,0 +1 @@
+BOARD=system76/addw4

models/addw4/ecspy.txt

@@ -0,0 +1,89 @@
+id 5570 rev 7
+A0: data 1 mirror 1 pot 0 control 00
+A1: data 0 mirror 0 pot 0 control 80
+A2: data 0 mirror 0 pot 0 control 00
+A3: data 1 mirror 1 pot 0 control 80
+A4: data 0 mirror 0 pot 0 control 00
+A5: data 0 mirror 0 pot 0 control 00
+A6: data 0 mirror 0 pot 0 control 00
+A7: data 1 mirror 0 pot 0 control 00
+B0: data 0 mirror 0 pot 0 control 84
+B1: data 1 mirror 1 pot 0 control 84
+B2: data 1 mirror 1 pot 0 control 80
+B3: data 1 mirror 1 pot 0 control 80
+B4: data 1 mirror 1 pot 0 control 40
+B5: data 0 mirror 0 pot 0 control 80
+B6: data 1 mirror 1 pot 0 control 44
+B7: data 1 mirror 1 pot 0 control 80
+C0: data 1 mirror 1 pot 0 control 80
+C1: data 1 mirror 1 pot 0 control 04
+C2: data 1 mirror 1 pot 0 control 04
+C3: data 1 mirror 1 pot 0 control 04
+C4: data 0 mirror 0 pot 0 control 84
+C5: data 1 mirror 1 pot 0 control 04
+C6: data 1 mirror 1 pot 0 control 40
+C7: data 1 mirror 1 pot 0 control 44
+D0: data 1 mirror 1 pot 0 control 44
+D1: data 1 mirror 1 pot 0 control 44
+D2: data 1 mirror 1 pot 0 control 00
+D3: data 0 mirror 0 pot 0 control 40
+D4: data 0 mirror 0 pot 0 control 80
+D5: data 1 mirror 1 pot 0 control 44
+D6: data 1 mirror 1 pot 0 control 02
+D7: data 1 mirror 1 pot 0 control 02
+E0: data 1 mirror 1 pot 0 control 04
+E1: data 1 mirror 1 pot 0 control 44
+E2: data 0 mirror 0 pot 0 control 84
+E3: data 1 mirror 1 pot 0 control 40
+E4: data 1 mirror 1 pot 0 control 42
+E5: data 1 mirror 1 pot 0 control 40
+E6: data 0 mirror 0 pot 0 control 80
+E7: data 1 mirror 1 pot 0 control 04
+F0: data 0 mirror 0 pot 0 control 44
+F1: data 1 mirror 1 pot 0 control 44
+F2: data 1 mirror 1 pot 0 control 44
+F3: data 1 mirror 1 pot 0 control 40
+F4: data 1 mirror 1 pot 0 control 04
+F5: data 1 mirror 1 pot 0 control 04
+F6: data 0 mirror 0 pot 0 control 40
+F7: data 0 mirror 0 pot 0 control 40
+G0: data 1 mirror 1 pot 0 control 40
+G1: data 1 mirror 1 pot 0 control 44
+G2: data 1 mirror 1 pot 0 control 80
+G3: data 0 mirror 0 pot 0 control 00
+G4: data 0 mirror 0 pot 0 control 00
+G5: data 0 mirror 0 pot 0 control 00
+G6: data 0 mirror 0 pot 0 control 40
+G7: data 0 mirror 0 pot 0 control 00
+H0: data 1 mirror 1 pot 0 control 80
+H1: data 0 mirror 0 pot 0 control 82
+H2: data 0 mirror 0 pot 0 control 40
+H3: data 1 mirror 1 pot 0 control 44
+H4: data 1 mirror 1 pot 0 control 80
+H5: data 1 mirror 1 pot 0 control 40
+H6: data 1 mirror 1 pot 0 control 80
+H7: data 1 mirror 1 pot 0 control 80
+I0: data 0 mirror 0 pot 0 control 00
+I1: data 0 mirror 0 pot 0 control 00
+I2: data 0 mirror 0 pot 0 control 80
+I3: data 0 mirror 0 pot 0 control 00
+I4: data 0 mirror 0 pot 0 control 00
+I5: data 0 mirror 0 pot 0 control 00
+I6: data 0 mirror 0 pot 0 control 00
+I7: data 0 mirror 0 pot 0 control 00
+J0: data 0 mirror 0 pot 0 control 40
+J1: data 1 mirror 1 pot 0 control 40
+J2: data 0 mirror 0 pot 0 control 40
+J3: data 0 mirror 0 pot 0 control 82
+J4: data 1 mirror 1 pot 0 control 40
+J5: data 1 mirror 1 pot 0 control 80
+J6: data 0 mirror 0 pot 0 control 44
+J7: data 1 mirror 1 pot 0 control 40
+M0: data 0 mirror 0 control 06
+M1: data 0 mirror 1 control 06
+M2: data 1 mirror 1 control 06
+M3: data 1 mirror 1 control 06
+M4: data 0 mirror 1 control 06
+M5: data 0 mirror 0 control 00
+M6: data 1 mirror 1 control 86
+M7: data 0 mirror 0 control 00

models/addw4/edk2.config

@@ -0,0 +1,9 @@
+BOOTLOADER=COREBOOT
+DISABLE_SERIAL_TERMINAL=TRUE
+PLATFORM_BOOT_TIMEOUT=2
+PS2_KEYBOARD_ENABLE=TRUE
+SECURE_BOOT_ENABLE=TRUE
+SERIAL_DRIVER_ENABLE=FALSE
+SHELL_TYPE=NONE
+TPM_ENABLE=TRUE
+#SYSTEM76_EC_LOGGING=TRUE

models/bonw14/README.md

@@ -9,4 +9,4 @@
   - HAP: false
 - [ME](./me.rom)
   - Size: 4092 KB
-  - Version: 14.0.60.1807
+  - Version: 14.1.72.2287

models/bonw14/edk2.config

@@ -7,7 +7,3 @@ SERIAL_DRIVER_ENABLE=FALSE
 SHELL_TYPE=NONE
 TPM_ENABLE=TRUE
 #SYSTEM76_EC_LOGGING=TRUE
-
-# FMP UUIDs for ESRT
-SYSTEM_FMP_UUID=ddb89e07-21a5-4fc4-a489-a1dd805de663
-EC_FMP_UUID=38bf32e8-d40d-47cd-9412-cd362779ad1b

models/bonw14/gpio.h

@@ -1,245 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#ifndef MAINBOARD_GPIO_H
-#define MAINBOARD_GPIO_H
-
-#include <soc/gpe.h>
-#include <soc/gpio.h>
-
-#ifndef __ACPI__
-
-/* Pad configuration in ramstage. */
-static const struct pad_config gpio_table[] = {
-		PAD_CFG_NF(GPD0, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPD1, NATIVE, DEEP, NF1),
-		PAD_CFG_GPI(GPD2, NATIVE, PWROK),
-		PAD_CFG_NF(GPD3, UP_20K, DEEP, NF1),
-		PAD_CFG_NF(GPD4, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPD5, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPD6, UP_20K, PWROK, NF1),
-		PAD_CFG_GPI(GPD7, UP_20K, PWROK),
-		PAD_CFG_NF(GPD8, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPD9, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPD10, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPD11, UP_20K, PWROK),
-		PAD_CFG_NF(GPP_A0, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_A1, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_A2, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_A3, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_A4, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_A5, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_A6, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_A7, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_A8, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_A9, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_A10, UP_20K, DEEP, NF1),
-		_PAD_CFG_STRUCT(GPP_A11, 0x80100100, 0x0000),
-		PAD_CFG_GPI(GPP_A12, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_A13, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_A14, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_A15, UP_20K, DEEP),
-		PAD_CFG_NF(GPP_A16, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPP_A17, UP_20K, DEEP),
-		PAD_CFG_TERM_GPO(GPP_A18, 1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_A19, UP_20K, DEEP),
-		PAD_CFG_TERM_GPO(GPP_A20, 1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_A21, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_A22, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_A23, UP_20K, DEEP),
-		_PAD_CFG_STRUCT(GPP_B0, 0x42080100, 0x3000),
-		PAD_CFG_GPI(GPP_B1, UP_20K, DEEP),
-		PAD_CFG_NF(GPP_B2, NONE, DEEP, NF1),
-		PAD_CFG_TERM_GPO(GPP_B3, 1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_B4, UP_20K, DEEP),
-		PAD_CFG_NF(GPP_B5, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_B6, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPP_B7, UP_20K, PLTRST),
-		PAD_CFG_GPI(GPP_B8, UP_20K, PLTRST),
-		PAD_CFG_NF(GPP_B9, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPP_B10, UP_20K, PLTRST),
-		PAD_CFG_TERM_GPO(GPP_B11, 1, NONE, DEEP),
-		PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_B14, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPP_B15, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_B16, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_B17, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_B18, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_B19, UP_20K, DEEP),
-		_PAD_CFG_STRUCT(GPP_B20, 0x42040100, 0x0000),
-		PAD_CFG_GPI(GPP_B21, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_B22, UP_20K, DEEP),
-		PAD_CFG_NF(GPP_B23, NONE, DEEP, NF2),
-		PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPP_C2, UP_20K, DEEP),
-		PAD_CFG_NF(GPP_C3, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_C4, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_C5, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_C6, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_C7, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPP_C8, NONE, PLTRST),
-		PAD_CFG_GPI(GPP_C9, NONE, DEEP),
-		PAD_CFG_GPI(GPP_C10, DN_20K, DEEP),
-		PAD_CFG_TERM_GPO(GPP_C11, 1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_C12, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_C13, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_C14, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_C15, UP_20K, DEEP),
-		PAD_CFG_NF(GPP_C16, NONE, PLTRST, NF1),
-		PAD_CFG_NF(GPP_C17, NONE, PLTRST, NF1),
-		PAD_CFG_NF(GPP_C18, NONE, PLTRST, NF1),
-		PAD_CFG_NF(GPP_C19, NONE, PLTRST, NF1),
-		PAD_CFG_NF(GPP_C20, NONE, PLTRST, NF1),
-		PAD_CFG_NF(GPP_C21, NONE, PLTRST, NF1),
-		PAD_CFG_GPI(GPP_C22, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_C23, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_D0, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_D1, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_D2, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_D3, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_D4, UP_20K, DEEP),
-		PAD_CFG_NF(GPP_D5, NONE, DEEP, NF3),
-		PAD_CFG_NF(GPP_D6, NONE, DEEP, NF3),
-		PAD_CFG_NF(GPP_D7, NONE, PLTRST, NF1),
-		PAD_CFG_NF(GPP_D8, NONE, PLTRST, NF1),
-		PAD_CFG_GPI(GPP_D9, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_D10, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_D11, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_D12, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_D13, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_D14, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_D15, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_D16, UP_20K, DEEP),
-		PAD_CFG_NF(GPP_D17, UP_20K, DEEP, NF1),
-		PAD_CFG_NF(GPP_D18, UP_20K, DEEP, NF1),
-		PAD_CFG_NF(GPP_D19, UP_20K, DEEP, NF1),
-		PAD_CFG_NF(GPP_D20, UP_20K, DEEP, NF1),
-		PAD_CFG_GPI(GPP_D21, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_D22, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_D23, UP_20K, DEEP),
-		PAD_CFG_NF(GPP_E0, NONE, DEEP, NF2),
-		PAD_CFG_NF(GPP_E1, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_E2, NONE, DEEP, NF2),
-		PAD_CFG_GPI(GPP_E3, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_E4, UP_20K, DEEP),
-		PAD_CFG_NF(GPP_E5, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_E6, NONE, DEEP, NF1),
-		_PAD_CFG_STRUCT(GPP_E7, 0x80800100, 0x0000),
-		PAD_CFG_NF(GPP_E8, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPP_E9, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_E10, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_E11, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_E12, UP_20K, DEEP),
-		PAD_CFG_NF(GPP_F0, NONE, DEEP, NF2),
-		PAD_CFG_NF(GPP_F1, NONE, DEEP, NF1),
-		PAD_CFG_TERM_GPO(GPP_F2, 0, UP_20K, PLTRST),
-		PAD_CFG_NF(GPP_F3, NONE, DEEP, NF2),
-		PAD_CFG_NF(GPP_F4, NONE, DEEP, NF2),
-		PAD_CFG_NF(GPP_F5, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_F6, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPP_F7, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_F8, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_F9, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_F10, UP_20K, DEEP),
-		PAD_CFG_TERM_GPO(GPP_F11, 0, NONE, DEEP),
-		PAD_CFG_GPI(GPP_F12, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_F13, UP_20K, DEEP),
-		PAD_CFG_NF(GPP_F14, NONE, DEEP, NF2),
-		PAD_CFG_GPI(GPP_F15, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_F16, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_F17, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_F18, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_F19, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_F20, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_F21, UP_20K, DEEP),
-		PAD_CFG_TERM_GPO(GPP_F22, 1, UP_20K, DEEP),
-		PAD_CFG_TERM_GPO(GPP_F23, 0, NONE, DEEP),
-		PAD_CFG_GPI(GPP_G0, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_G1, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_G2, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_G3, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_G4, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_G5, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_G6, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_G7, UP_20K, DEEP),
-		PAD_CFG_NF(GPP_H0, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_H1, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_H2, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPP_H3, NONE, PLTRST),
-		PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1),
-		PAD_CFG_GPI(GPP_H5, NONE, PLTRST),
-		PAD_CFG_GPI(GPP_H6, NONE, PLTRST),
-		PAD_CFG_TERM_GPO(GPP_H7, 0, NONE, DEEP),
-		PAD_CFG_NF(GPP_H8, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_H9, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_H10, NONE, PLTRST, NF1),
-		PAD_CFG_TERM_GPO(GPP_H11, 0, NONE, DEEP),
-		PAD_CFG_GPI(GPP_H12, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_H13, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_H14, UP_20K, DEEP),
-		_PAD_CFG_STRUCT(GPP_H15, 0x40880100, 0x3000),
-		PAD_CFG_GPI(GPP_H16, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_H17, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_H18, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_H19, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_H20, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_H21, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_H22, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_H23, UP_20K, DEEP),
-		_PAD_CFG_STRUCT(GPP_I0, 0x46080100, 0x0000),
-		_PAD_CFG_STRUCT(GPP_I1, 0x46080100, 0x0000),
-		_PAD_CFG_STRUCT(GPP_I2, 0x46080100, 0x0000),
-		_PAD_CFG_STRUCT(GPP_I3, 0x46080100, 0x0000),
-		PAD_CFG_NF(GPP_I4, NONE, DEEP, NF1),
-		PAD_CFG_TERM_GPO(GPP_I5, 0, NONE, DEEP),
-		PAD_CFG_GPI(GPP_I6, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_I7, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_I8, UP_20K, DEEP),
-		PAD_CFG_TERM_GPO(GPP_I9, 1, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_I10, 0, NONE, DEEP),
-		PAD_CFG_GPI(GPP_I11, UP_20K, DEEP),
-		PAD_CFG_TERM_GPO(GPP_I12, 0, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_I13, 0, NONE, DEEP),
-		PAD_CFG_GPI(GPP_I14, UP_20K, DEEP),
-		PAD_CFG_NF(GPP_J0, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_J1, NONE, DEEP, NF2),
-		PAD_CFG_GPI(GPP_J2, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_J3, UP_20K, DEEP),
-		PAD_CFG_NF(GPP_J4, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_J5, UP_20K, DEEP, NF1),
-		PAD_CFG_NF(GPP_J6, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_J7, UP_20K, DEEP, NF1),
-		PAD_CFG_NF(GPP_J8, NONE, DEEP, NF1),
-		PAD_CFG_NF(GPP_J9, UP_20K, DEEP, NF1),
-		PAD_CFG_GPI(GPP_J10, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_J11, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_K0, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_K1, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_K2, UP_20K, DEEP),
-		_PAD_CFG_STRUCT(GPP_K3, 0x80880100, 0x3000),
-		PAD_CFG_GPI(GPP_K4, UP_20K, DEEP),
-		PAD_CFG_TERM_GPO(GPP_K5, 0, NONE, DEEP),
-		_PAD_CFG_STRUCT(GPP_K6, 0x40880100, 0x0000),
-		PAD_CFG_GPI(GPP_K7, UP_20K, DEEP),
-		PAD_CFG_TERM_GPO(GPP_K8, 0, NONE, DEEP),
-		PAD_CFG_GPI(GPP_K9, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_K10, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_K11, UP_20K, DEEP),
-		_PAD_CFG_STRUCT(GPP_K12, 0x82880100, 0x3000),
-		PAD_CFG_GPI(GPP_K13, UP_20K, DEEP),
-		PAD_CFG_TERM_GPO(GPP_K14, 0, NONE, DEEP),
-		PAD_CFG_GPI(GPP_K15, UP_20K, DEEP),
-		PAD_CFG_TERM_GPO(GPP_K16, 0, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_K17, UP_20K, DEEP),
-		PAD_CFG_TERM_GPO(GPP_K18, 1, NONE, DEEP),
-		PAD_CFG_GPI(GPP_K19, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_K20, UP_20K, DEEP),
-		PAD_CFG_GPI(GPP_K21, NONE, DEEP),
-		PAD_CFG_TERM_GPO(GPP_K22, 0, TODO_0x2800, DEEP),
-		PAD_CFG_TERM_GPO(GPP_K23, 0, NONE, PLTRST),
-};
-
-#endif
-
-#endif

models/bonw14/hda.h

@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#ifndef HDA_VERB_H
-#define HDA_VERB_H
-
-#include <device/azalia_device.h>
-
-const u32 cim_verb_data[] = {
-	/* Realtek, ALC1220 */
-	0x10ec1220, /* Vendor ID */
-	0x15587714, /* Subsystem ID */
-	12, /* Number of entries */
-	AZALIA_SUBVENDOR(0, 0x15587714),
-	AZALIA_PIN_CFG(0, 0x12, 0x90a60130),
-	AZALIA_PIN_CFG(0, 0x14, 0x40000000),
-	AZALIA_PIN_CFG(0, 0x15, 0x411111f0),
-	AZALIA_PIN_CFG(0, 0x16, 0x411111f0),
-	AZALIA_PIN_CFG(0, 0x17, 0x411111f0),
-	AZALIA_PIN_CFG(0, 0x18, 0x04a11040),
-	AZALIA_PIN_CFG(0, 0x19, 0x411111f0),
-	AZALIA_PIN_CFG(0, 0x1a, 0x411111f0),
-	AZALIA_PIN_CFG(0, 0x1b, 0x90170110),
-	AZALIA_PIN_CFG(0, 0x1d, 0x4094022d),
-	AZALIA_PIN_CFG(0, 0x1e, 0x04451120),
-	/* Nvidia, GPU92HDMI/DP */
-	0x10de0092, /* Vendor ID */
-	0x15587714, /* Subsystem ID */
-	5, /* Number of entries */
-	AZALIA_SUBVENDOR(0, 0x15587714),
-	AZALIA_PIN_CFG(0, 0x04, 0x185600f0),
-	AZALIA_PIN_CFG(0, 0x05, 0x185600f0),
-	AZALIA_PIN_CFG(0, 0x06, 0x185600f0),
-	AZALIA_PIN_CFG(0, 0x07, 0x185600f0),
-};
-
-const u32 pc_beep_verbs[] = {};
-
-AZALIA_ARRAY_SIZES;
-
-#endif

models/bonw15-b/IntelGopDriver.inf

@@ -0,0 +1,9 @@
+[Defines]
+  INF_VERSION                    = 0x00010005
+  BASE_NAME                      = IntelGopDriver
+  FILE_GUID                      = 767222f4-a9f4-41ba-9faa-edaa1405a486
+  MODULE_TYPE                    = UEFI_DRIVER
+  VERSION_STRING                 = 1.0
+
+[Binaries.X64]
+  PE32|IntelGopDriver.efi|*

models/bonw15-b/README.md

@@ -0,0 +1,12 @@
+# System76 Bonobo WS (bonw15-b)
+
+## Contents
+
+- [EC](./ec.rom)
+  - *Read Error: No such file or directory (os error 2)*
+- [FD](./fd.rom)
+  - Size: 4 KB
+  - HAP: false
+- [ME](./me.rom)
+  - Size: 3944 KB
+  - Version: 16.1.30.2330

models/bonw15-b/README.md.in

@@ -0,0 +1 @@
+# System76 Bonobo WS (bonw15-b)

models/bonw15-b/chip.txt

@@ -0,0 +1 @@
+GD25Q256D

models/bonw15-b/coreboot-collector.txt

@@ -0,0 +1,334 @@
+## PCI ##
+PCI Device: 0000:00:00.0: Class 0x00060000, Vendor 0x8086, Device 0xA702, Revision 0x01
+PCI Device: 0000:00:01.0: Class 0x00060400, Vendor 0x8086, Device 0xA70D, Revision 0x01
+PCI Device: 0000:00:01.1: Class 0x00060400, Vendor 0x8086, Device 0xA72D, Revision 0x01
+PCI Device: 0000:00:02.0: Class 0x00030000, Vendor 0x8086, Device 0xA788, Revision 0x04
+PCI Device: 0000:00:04.0: Class 0x00118000, Vendor 0x8086, Device 0xA71D, Revision 0x01
+PCI Device: 0000:00:08.0: Class 0x00088000, Vendor 0x8086, Device 0xA74F, Revision 0x01
+PCI Device: 0000:00:0a.0: Class 0x00118000, Vendor 0x8086, Device 0xA77D, Revision 0x01
+PCI Device: 0000:00:0e.0: Class 0x00010400, Vendor 0x8086, Device 0xA77F, Revision 0x00
+PCI Device: 0000:00:14.0: Class 0x000C0330, Vendor 0x8086, Device 0x7A60, Revision 0x11
+PCI Device: 0000:00:14.2: Class 0x00050000, Vendor 0x8086, Device 0x7A27, Revision 0x11
+PCI Device: 0000:00:14.3: Class 0x00028000, Vendor 0x8086, Device 0x7A70, Revision 0x11
+PCI Device: 0000:00:15.0: Class 0x000C8000, Vendor 0x8086, Device 0x7A4C, Revision 0x11
+PCI Device: 0000:00:15.1: Class 0x000C8000, Vendor 0x8086, Device 0x7A4D, Revision 0x11
+PCI Device: 0000:00:16.0: Class 0x00078000, Vendor 0x8086, Device 0x7A68, Revision 0x11
+PCI Device: 0000:00:1c.0: Class 0x00060400, Vendor 0x8086, Device 0x7A3E, Revision 0x11
+PCI Device: 0000:00:1d.0: Class 0x00060400, Vendor 0x8086, Device 0x7A30, Revision 0x11
+PCI Device: 0000:00:1f.0: Class 0x00060100, Vendor 0x8086, Device 0x7A0C, Revision 0x11
+PCI Device: 0000:00:1f.3: Class 0x00040300, Vendor 0x8086, Device 0x7A50, Revision 0x11
+PCI Device: 0000:00:1f.4: Class 0x000C0500, Vendor 0x8086, Device 0x7A23, Revision 0x11
+PCI Device: 0000:00:1f.5: Class 0x000C8000, Vendor 0x8086, Device 0x7A24, Revision 0x11
+PCI Device: 0000:02:00.0: Class 0x00030000, Vendor 0x10DE, Device 0x27E0, Revision 0xA1
+PCI Device: 0000:02:00.1: Class 0x00040300, Vendor 0x10DE, Device 0x22BC, Revision 0xA1
+PCI Device: 0000:03:00.0: Class 0x00020000, Vendor 0x8086, Device 0x3101, Revision 0x03
+PCI Device: 0000:04:00.0: Class 0x00060400, Vendor 0x8086, Device 0x1136, Revision 0x02
+PCI Device: 0000:05:00.0: Class 0x00060400, Vendor 0x8086, Device 0x1136, Revision 0x02
+PCI Device: 0000:05:01.0: Class 0x00060400, Vendor 0x8086, Device 0x1136, Revision 0x02
+PCI Device: 0000:05:02.0: Class 0x00060400, Vendor 0x8086, Device 0x1136, Revision 0x02
+PCI Device: 0000:05:03.0: Class 0x00060400, Vendor 0x8086, Device 0x1136, Revision 0x02
+PCI Device: 0000:06:00.0: Class 0x000C0340, Vendor 0x8086, Device 0x1137, Revision 0x00
+PCI Device: 0000:3a:00.0: Class 0x000C0330, Vendor 0x8086, Device 0x1138, Revision 0x00
+PCI Device: 10000:e0:1b.0: Class 0x00088000, Vendor 0x8086, Device 0x09AB, Revision 0x00
+PCI Device: 10000:e0:1b.4: Class 0x00060400, Vendor 0x8086, Device 0x7A44, Revision 0x11
+PCI Device: 10000:e1:00.0: Class 0x00010802, Vendor 0x144D, Device 0xA80A, Revision 0x00
+## GPIO ##
+600 Series PCH
+GPP_I0 (0x6E,0x00) 0x44000200 0x00000018 0x00000000 0x00000000
+GPP_I1 (0x6E,0x02) 0x86880100 0x00000019 0x00000000 0x00000000
+GPP_I2 (0x6E,0x04) 0x86880100 0x0000001a 0x00000000 0x00000000
+GPP_I3 (0x6E,0x06) 0x86880100 0x0000001b 0x00000000 0x00000000
+GPP_I4 (0x6E,0x08) 0x86880100 0x0000001c 0x00000000 0x00000000
+GPP_I5 (0x6E,0x0A) 0x44000200 0x0000001d 0x00000000 0x00000000
+GPP_I6 (0x6E,0x0C) 0x44000200 0x0000001e 0x00000000 0x00000000
+GPP_I7 (0x6E,0x0E) 0x44000200 0x00000020 0x00000000 0x00000000
+GPP_I8 (0x6E,0x10) 0x44000200 0x00000021 0x00000000 0x00000000
+GPP_I9 (0x6E,0x12) 0x44000200 0x00000022 0x00000000 0x00000000
+GPP_I10 (0x6E,0x14) 0x44000200 0x00000023 0x00000000 0x00000000
+GPP_I11 (0x6E,0x16) 0x44000300 0x00000024 0x00000000 0x00000000
+GPP_I12 (0x6E,0x18) 0x44000300 0x00000025 0x00000000 0x00000000
+GPP_I13 (0x6E,0x1A) 0x44000300 0x00000026 0x00000000 0x00000000
+GPP_I14 (0x6E,0x1C) 0x44000300 0x00000027 0x00000000 0x00000000
+GPP_I15 (0x6E,0x1E) 0x44000200 0x00000028 0x00000000 0x00000000
+GPP_I16 (0x6E,0x20) 0x44000200 0x00000029 0x00000000 0x00000000
+GPP_I17 (0x6E,0x22) 0x44000200 0x0000002a 0x00000000 0x00000000
+GPP_I18 (0x6E,0x24) 0x44000102 0x0000002b 0x00000000 0x00000000
+GPP_I19 (0x6E,0x26) 0x44000200 0x0000002c 0x00000000 0x00000000
+GPP_I20 (0x6E,0x28) 0x44000200 0x0000002d 0x00000000 0x00000000
+GPP_I21 (0x6E,0x2A) 0x44000200 0x0000002e 0x00000000 0x00000000
+GPP_I22 (0x6E,0x2C) 0x44000102 0x00000030 0x00000000 0x00000000
+GPP_R0 (0x6E,0x32) 0x44000500 0x00000031 0x00000000 0x00000000
+GPP_R1 (0x6E,0x34) 0x44000500 0x00003c32 0x00000000 0x00000000
+GPP_R2 (0x6E,0x36) 0x44000500 0x00003c33 0x00000000 0x00000000
+GPP_R3 (0x6E,0x38) 0x44000500 0x00003c34 0x00000000 0x00000000
+GPP_R4 (0x6E,0x3A) 0x44000500 0x00000035 0x00000000 0x00000000
+GPP_R5 (0x6E,0x3C) 0x44000200 0x00000036 0x00000000 0x00000000
+GPP_R6 (0x6E,0x3E) 0x44000200 0x00000037 0x00000000 0x00000000
+GPP_R7 (0x6E,0x40) 0x44000200 0x00000038 0x00000000 0x00000000
+GPP_R8 (0x6E,0x42) 0x44000102 0x00000039 0x00000000 0x00000000
+GPP_R9 (0x6E,0x44) 0x44000702 0x0000003a 0x00000000 0x00000000
+GPP_R10 (0x6E,0x46) 0x44000200 0x0000003b 0x00000000 0x00000000
+GPP_R11 (0x6E,0x48) 0x44000200 0x0000003c 0x00000000 0x00000000
+GPP_R12 (0x6E,0x4A) 0x44000200 0x0000003d 0x00000000 0x00000000
+GPP_R13 (0x6E,0x4C) 0x44000200 0x0000003e 0x00000000 0x00000000
+GPP_R14 (0x6E,0x4E) 0x44000200 0x0000003f 0x00000000 0x00000000
+GPP_R15 (0x6E,0x50) 0x44000200 0x00000040 0x00000000 0x00000000
+GPP_R16 (0x6E,0x52) 0x44000201 0x00000041 0x00000000 0x00000000
+GPP_R17 (0x6E,0x54) 0x44000200 0x00000042 0x00000000 0x00000000
+GPP_R18 (0x6E,0x56) 0x44000200 0x00000043 0x00000000 0x00000000
+GPP_R19 (0x6E,0x58) 0x44000200 0x00000044 0x00000000 0x00000000
+GPP_R20 (0x6E,0x5A) 0x44000200 0x00000045 0x00000000 0x00000000
+GPP_R21 (0x6E,0x5C) 0x44000200 0x00000046 0x00000000 0x00000000
+GPP_J0 (0x6E,0x60) 0x44000500 0x00000047 0x00000000 0x00000000
+GPP_J1 (0x6E,0x62) 0x44000700 0x00000048 0x00000000 0x00000000
+GPP_J2 (0x6E,0x64) 0x44000500 0x00000049 0x00000000 0x00000000
+GPP_J3 (0x6E,0x66) 0x44000502 0x0000304a 0x00000000 0x00000000
+GPP_J4 (0x6E,0x68) 0x44000500 0x0000004b 0x00000000 0x00000000
+GPP_J5 (0x6E,0x6A) 0x44000500 0x0000304c 0x00000000 0x00000000
+GPP_J6 (0x6E,0x6C) 0x44000500 0x0000004d 0x00000000 0x00000000
+GPP_J7 (0x6E,0x6E) 0x44000500 0x0000004e 0x00000000 0x00000000
+GPP_J8 (0x6E,0x70) 0x44000102 0x00000050 0x00000000 0x00000000
+GPP_J9 (0x6E,0x72) 0x44000200 0x00000051 0x00000000 0x00000000
+GPP_J10 (0x6E,0x74) 0x44000200 0x00000052 0x00000000 0x00000000
+GPP_J11 (0x6E,0x76) 0x44000200 0x00000053 0x00000000 0x00000000
+GPP_B0 (0x6D,0x00) 0x82900102 0x00000050 0x00000000 0x00000000
+GPP_B1 (0x6D,0x02) 0x44000200 0x00000051 0x00000000 0x00000000
+GPP_B2 (0x6D,0x04) 0x44000102 0x00000052 0x00000000 0x00000000
+GPP_B3 (0x6D,0x06) 0x44000201 0x00000053 0x00000000 0x00000000
+GPP_B4 (0x6D,0x08) 0x44000200 0x00000054 0x00000000 0x00000000
+GPP_B5 (0x6D,0x0A) 0x44000200 0x00000055 0x00000000 0x00000000
+GPP_B6 (0x6D,0x0C) 0x44000200 0x00000056 0x00000000 0x00000000
+GPP_B7 (0x6D,0x0E) 0x44000200 0x00000057 0x00000000 0x00000000
+GPP_B8 (0x6D,0x10) 0x44000200 0x00000058 0x00000000 0x00000000
+GPP_B9 (0x6D,0x12) 0x44000200 0x00000059 0x00000000 0x00000000
+GPP_B10 (0x6D,0x14) 0x44000200 0x0000005a 0x00000000 0x00000000
+GPP_B11 (0x6D,0x16) 0x44000200 0x0000005b 0x00000000 0x00000000
+GPP_B12 (0x6D,0x18) 0x44000700 0x0000005c 0x00000000 0x00000000
+GPP_B13 (0x6D,0x1A) 0x44000700 0x0000005d 0x00000000 0x00000000
+GPP_B14 (0x6D,0x1C) 0x44000600 0x0000005e 0x00000000 0x00000000
+GPP_B15 (0x6D,0x1E) 0x44000200 0x0000005f 0x00000000 0x00000000
+GPP_B16 (0x6D,0x20) 0x44000200 0x00000060 0x00000000 0x00000000
+GPP_B17 (0x6D,0x22) 0x04000201 0x00000061 0x00000000 0x00000000
+GPP_B18 (0x6D,0x24) 0x04000702 0x00000062 0x00000000 0x00000000
+GPP_B19 (0x6D,0x26) 0x44000201 0x00000063 0x00000000 0x00000000
+GPP_B20 (0x6D,0x28) 0x44000200 0x00000064 0x00000000 0x00000000
+GPP_B21 (0x6D,0x2A) 0x44000200 0x00000065 0x00000000 0x00000000
+GPP_B22 (0x6D,0x2C) 0x44000201 0x00000066 0x00000000 0x00000000
+GPP_B23 (0x6D,0x2E) 0x44000102 0x00000067 0x00000800 0x00000000
+GPP_G0 (0x6D,0x30) 0x04000200 0x00000068 0x00000000 0x00000000
+GPP_G1 (0x6D,0x32) 0x44000100 0x00000069 0x00000000 0x00000000
+GPP_G2 (0x6D,0x34) 0x44000100 0x0000106a 0x00000000 0x00000000
+GPP_G3 (0x6D,0x36) 0x44000102 0x0000006b 0x00000000 0x00000000
+GPP_G4 (0x6D,0x38) 0x44000100 0x0000006c 0x00000000 0x00000000
+GPP_G5 (0x6D,0x3A) 0x44000700 0x0000006d 0x00000000 0x00000000
+GPP_G6 (0x6D,0x3C) 0x44000100 0x0000006e 0x00000000 0x00000000
+GPP_G7 (0x6D,0x3E) 0x42800102 0x0000006f 0x00000000 0x00000000
+GPP_H0 (0x6D,0x40) 0x44000102 0x00000070 0x00000000 0x00000000
+GPP_H1 (0x6D,0x42) 0x44000200 0x00000071 0x00000000 0x00000000
+GPP_H2 (0x6D,0x44) 0x44000100 0x00000072 0x00000000 0x00000000
+GPP_H3 (0x6D,0x46) 0x44000702 0x00000073 0x00000000 0x00000000
+GPP_H4 (0x6D,0x48) 0x44000700 0x00000074 0x00000000 0x00000000
+GPP_H5 (0x6D,0x4A) 0x44000702 0x00000075 0x00000000 0x00000000
+GPP_H6 (0x6D,0x4C) 0x44000300 0x00000076 0x00000000 0x00000000
+GPP_H7 (0x6D,0x4E) 0x44000700 0x00000077 0x00000000 0x00000000
+GPP_H8 (0x6D,0x50) 0x44000700 0x00000018 0x00000000 0x00000000
+GPP_H9 (0x6D,0x52) 0x44000702 0x00000019 0x00000000 0x00000000
+GPP_H10 (0x6D,0x54) 0x44000502 0x00000020 0x00000000 0x00000000
+GPP_H11 (0x6D,0x56) 0x44000502 0x00000021 0x00000000 0x00000000
+GPP_H12 (0x6D,0x58) 0x44000102 0x00000022 0x00000000 0x00000000
+GPP_H13 (0x6D,0x5A) 0x44000502 0x00000023 0x00000000 0x00000000
+GPP_H14 (0x6D,0x5C) 0x44000500 0x00000024 0x00000000 0x00000000
+GPP_H15 (0x6D,0x5E) 0x44000102 0x00000025 0x00000800 0x00000000
+GPP_H16 (0x6D,0x60) 0x44000102 0x00000026 0x00000000 0x00000000
+GPP_H17 (0x6D,0x62) 0x44000201 0x00000027 0x00000000 0x00000000
+GPP_H18 (0x6D,0x64) 0x44000102 0x00000028 0x00000000 0x00000000
+GPP_H19 (0x6D,0x66) 0x44000200 0x00000029 0x00000000 0x00000000
+GPP_H20 (0x6D,0x68) 0x44000200 0x0000002a 0x00000000 0x00000000
+GPP_H21 (0x6D,0x6A) 0x44000201 0x0000002b 0x00000000 0x00000000
+GPP_H22 (0x6D,0x6C) 0x44000200 0x0000002c 0x00000000 0x00000000
+GPP_H23 (0x6D,0x6E) 0x44000102 0x0000002d 0x00000000 0x00000000
+GPD0 (0x6C,0x00) 0x04000702 0x00003060 0x00000000 0x00000000
+GPD1 (0x6C,0x02) 0x04000702 0x00003c61 0x00000000 0x00000000
+GPD2 (0x6C,0x04) 0x42880102 0x00000062 0x00000000 0x00000000
+GPD3 (0x6C,0x06) 0x04000702 0x00003063 0x00000010 0x00000000
+GPD4 (0x6C,0x08) 0x04000600 0x00000064 0x00000000 0x00000000
+GPD5 (0x6C,0x0A) 0x04000600 0x00000065 0x00000000 0x00000000
+GPD6 (0x6C,0x0C) 0x04000600 0x00000066 0x00000000 0x00000000
+GPD7 (0x6C,0x0E) 0x04000100 0x00000067 0x00000000 0x00000000
+GPD8 (0x6C,0x10) 0x04000700 0x00000068 0x00000000 0x00000000
+GPD9 (0x6C,0x12) 0x04000200 0x00000069 0x00000000 0x00000000
+GPD10 (0x6C,0x14) 0x04000600 0x0000006a 0x00000000 0x00000000
+GPD11 (0x6C,0x16) 0x44000200 0x0000006b 0x00000000 0x00000000
+GPD12 (0x6C,0x18) 0x44000200 0x0000006c 0x00000000 0x00000000
+GPP_A0 (0x6B,0x12) 0x44000700 0x00003018 0x00000000 0x00000000
+GPP_A1 (0x6B,0x14) 0x44000702 0x00003019 0x00000000 0x00000000
+GPP_A2 (0x6B,0x16) 0x44000700 0x00003020 0x00000000 0x00000000
+GPP_A3 (0x6B,0x18) 0x44000700 0x00003021 0x00000000 0x00000000
+GPP_A4 (0x6B,0x1A) 0x44000700 0x00003022 0x00000000 0x00000000
+GPP_A5 (0x6B,0x1C) 0x44000700 0x00001023 0x00000000 0x00000000
+GPP_A6 (0x6B,0x1E) 0x44000700 0x00000024 0x00000000 0x00000000
+GPP_A7 (0x6B,0x20) 0x44000200 0x00000025 0x00000000 0x00000000
+GPP_A8 (0x6B,0x22) 0x44000200 0x00000026 0x00000000 0x00000000
+GPP_A9 (0x6B,0x24) 0x44000200 0x00000027 0x00000000 0x00000000
+GPP_A10 (0x6B,0x26) 0x44000500 0x00000028 0x00000000 0x00000000
+GPP_A11 (0x6B,0x28) 0x44000102 0x00003029 0x00000000 0x00000000
+GPP_A12 (0x6B,0x2A) 0x44000200 0x0000002a 0x00000000 0x00000000
+GPP_A13 (0x6B,0x2C) 0x44000200 0x0000002b 0x00000000 0x00000000
+GPP_A14 (0x6B,0x2E) 0x44000200 0x0000002c 0x00000000 0x00000000
+GPP_C0 (0x6B,0x32) 0x44000502 0x0000002d 0x00000000 0x00000000
+GPP_C1 (0x6B,0x34) 0x44000502 0x0000002e 0x00000000 0x00000000
+GPP_C2 (0x6B,0x36) 0x84000102 0x0000002f 0x00000800 0x00000000
+GPP_C3 (0x6B,0x38) 0x44000200 0x00000030 0x00000000 0x00000000
+GPP_C4 (0x6B,0x3A) 0x44000200 0x00000031 0x00000000 0x00000000
+GPP_C5 (0x6B,0x3C) 0x44000502 0x00000032 0x00000000 0x00000000
+GPP_C6 (0x6B,0x3E) 0x44000200 0x00000033 0x00000000 0x00000000
+GPP_C7 (0x6B,0x40) 0x44000200 0x00000034 0x00000000 0x00000000
+GPP_C8 (0x6B,0x42) 0x44000102 0x00000035 0x00000000 0x00000000
+GPP_C9 (0x6B,0x44) 0x44000200 0x00000036 0x00000000 0x00000000
+GPP_C10 (0x6B,0x46) 0x44000200 0x00000037 0x00000000 0x00000000
+GPP_C11 (0x6B,0x48) 0x44000200 0x00000038 0x00000000 0x00000000
+GPP_C12 (0x6B,0x4A) 0x44000200 0x00000039 0x00000000 0x00000000
+GPP_C13 (0x6B,0x4C) 0x44000200 0x0000003a 0x00000000 0x00000000
+GPP_C14 (0x6B,0x4E) 0x44000200 0x0000003b 0x00000000 0x00000000
+GPP_C15 (0x6B,0x50) 0x44000200 0x0000003c 0x00000000 0x00000000
+GPP_C16 (0x6B,0x52) 0x44000502 0x0000003d 0x00000000 0x00000000
+GPP_C17 (0x6B,0x54) 0x44000502 0x0000003e 0x00000000 0x00000000
+GPP_C18 (0x6B,0x56) 0x44000502 0x0000003f 0x00000000 0x00000000
+GPP_C19 (0x6B,0x58) 0x44000502 0x00000040 0x00000000 0x00000000
+GPP_C20 (0x6B,0x5A) 0x44000102 0x00000041 0x00000000 0x00000000
+GPP_C21 (0x6B,0x5C) 0x44000102 0x00000042 0x00000000 0x00000000
+GPP_C22 (0x6B,0x5E) 0x44000200 0x00000043 0x00000000 0x00000000
+GPP_C23 (0x6B,0x60) 0x44000200 0x00000044 0x00000000 0x00000000
+GPP_S0 (0x6A,0x00) 0x44000200 0x01800030 0x00000000 0x00000000
+GPP_S1 (0x6A,0x02) 0x44000200 0x01800031 0x00000000 0x00000000
+GPP_S2 (0x6A,0x04) 0x44000200 0x01800032 0x00000000 0x00000000
+GPP_S3 (0x6A,0x06) 0x44000200 0x01800033 0x00000000 0x00000000
+GPP_S4 (0x6A,0x08) 0x44000200 0x01800034 0x00000000 0x00000000
+GPP_S5 (0x6A,0x0A) 0x44000200 0x01800035 0x00000000 0x00000000
+GPP_S6 (0x6A,0x0C) 0x44000200 0x01800036 0x00000000 0x00000000
+GPP_S7 (0x6A,0x0E) 0x44000200 0x01800037 0x00000000 0x00000000
+GPP_E0 (0x6A,0x10) 0x44000200 0x00000038 0x00000000 0x00000000
+GPP_E1 (0x6A,0x12) 0x44000200 0x00000039 0x00000000 0x00000000
+GPP_E2 (0x6A,0x14) 0x44000200 0x0000003a 0x00000000 0x00000000
+GPP_E3 (0x6A,0x16) 0x44000200 0x0000003b 0x00000000 0x00000000
+GPP_E4 (0x6A,0x18) 0x44000200 0x0000003c 0x00000000 0x00000000
+GPP_E5 (0x6A,0x1A) 0x44000200 0x0000003d 0x00000000 0x00000000
+GPP_E6 (0x6A,0x1C) 0x44000200 0x0000003e 0x00000000 0x00000000
+GPP_E7 (0x6A,0x1E) 0x80100102 0x0000003f 0x00000000 0x00000000
+GPP_E8 (0x6A,0x20) 0x44000500 0x00000040 0x00000000 0x00000000
+GPP_E9 (0x6A,0x22) 0x44000300 0x00000041 0x00000800 0x00000000
+GPP_E10 (0x6A,0x24) 0x44000300 0x00000042 0x00000800 0x00000000
+GPP_E11 (0x6A,0x26) 0x44000300 0x00000043 0x00000800 0x00000000
+GPP_E12 (0x6A,0x28) 0x44000300 0x00000044 0x00000000 0x00000000
+GPP_E13 (0x6A,0x2A) 0x44000200 0x00000045 0x00000000 0x00000000
+GPP_E14 (0x6A,0x2C) 0x44000200 0x00000046 0x00000000 0x00000000
+GPP_E15 (0x6A,0x2E) 0x44000200 0x00000047 0x00000000 0x00000000
+GPP_E16 (0x6A,0x30) 0x44000200 0x00000048 0x00000000 0x00000000
+GPP_E17 (0x6A,0x32) 0x44000200 0x00000049 0x00000000 0x00000000
+GPP_E18 (0x6A,0x34) 0x44000201 0x0000004a 0x00000000 0x00000000
+GPP_E19 (0x6A,0x36) 0x44000200 0x0000004b 0x00000000 0x00000000
+GPP_E20 (0x6A,0x38) 0x44000200 0x0000004c 0x00000000 0x00000000
+GPP_E21 (0x6A,0x3A) 0x44000200 0x0000004d 0x00000000 0x00000000
+GPP_K0 (0x6A,0x3E) 0x44000200 0x0000004e 0x00000000 0x00000000
+GPP_K1 (0x6A,0x40) 0x44000200 0x00000050 0x00000000 0x00000000
+GPP_K2 (0x6A,0x42) 0x44000200 0x00000051 0x00000000 0x00000000
+GPP_K3 (0x6A,0x44) 0x44000200 0x00000052 0x00000000 0x00000000
+GPP_K4 (0x6A,0x46) 0x44000200 0x00000053 0x00000000 0x00000000
+GPP_K5 (0x6A,0x48) 0x44000200 0x00000054 0x00000000 0x00000000
+GPP_K6 (0x6A,0x4A) 0x44000a02 0x00000055 0x00000000 0x00000000
+GPP_K7 (0x6A,0x4C) 0x44000a02 0x00000056 0x00000000 0x00000000
+GPP_K8 (0x6A,0x4E) 0x44000700 0x00000057 0x00000000 0x00000000
+GPP_K9 (0x6A,0x50) 0x44000700 0x00000058 0x00000000 0x00000000
+GPP_K10 (0x6A,0x52) 0x44000a02 0x00000059 0x00000000 0x00000000
+GPP_K11 (0x6A,0x54) 0x44000200 0x0000005a 0x00000000 0x00000000
+GPP_F0 (0x6A,0x5C) 0x44000200 0x0000005b 0x00000000 0x00000000
+GPP_F1 (0x6A,0x5E) 0x44000200 0x0000005c 0x00000000 0x00000000
+GPP_F2 (0x6A,0x60) 0x44000200 0x0000005d 0x00000000 0x00000000
+GPP_F3 (0x6A,0x62) 0x44000200 0x0000005e 0x00000000 0x00000000
+GPP_F4 (0x6A,0x64) 0x44000200 0x00000060 0x00000000 0x00000000
+GPP_F5 (0x6A,0x66) 0x84000200 0x00000061 0x00000000 0x00000000
+GPP_F6 (0x6A,0x68) 0x44000200 0x00000062 0x00000000 0x00000000
+GPP_F7 (0x6A,0x6A) 0x44000200 0x00000063 0x00000000 0x00000000
+GPP_F8 (0x6A,0x6C) 0x44000100 0x00000064 0x00000000 0x00000000
+GPP_F9 (0x6A,0x6E) 0x42880102 0x00000065 0x00000000 0x00000000
+GPP_F10 (0x6A,0x70) 0x44000200 0x00000066 0x00000000 0x00000000
+GPP_F11 (0x6A,0x72) 0x44000200 0x00000067 0x00000000 0x00000000
+GPP_F12 (0x6A,0x74) 0x44000200 0x00000068 0x00000000 0x00000000
+GPP_F13 (0x6A,0x76) 0x44000200 0x00000069 0x00000000 0x00000000
+GPP_F14 (0x6A,0x78) 0x44000200 0x0000006a 0x00000000 0x00000000
+GPP_F15 (0x6A,0x7A) 0x44000100 0x0000006b 0x00000000 0x00000000
+GPP_F16 (0x6A,0x7C) 0x44000200 0x0000006c 0x00000000 0x00000000
+GPP_F17 (0x6A,0x7E) 0x44000200 0x0000006d 0x00000000 0x00000000
+GPP_F18 (0x6A,0x80) 0x44000200 0x0000006e 0x00000000 0x00000000
+GPP_F19 (0x6A,0x82) 0x44000700 0x0000006f 0x00000000 0x00000000
+GPP_F20 (0x6A,0x84) 0x44000700 0x00000070 0x00000000 0x00000000
+GPP_F21 (0x6A,0x86) 0x44000700 0x00000071 0x00000000 0x00000000
+GPP_F22 (0x6A,0x88) 0x44000201 0x00000072 0x00000000 0x00000000
+GPP_F23 (0x6A,0x8A) 0x44000200 0x00000073 0x00000000 0x00000000
+GPP_D0 (0x69,0x20) 0x44000200 0x00000026 0x00000000 0x00000000
+GPP_D1 (0x69,0x22) 0x44000200 0x00000027 0x00000000 0x00000000
+GPP_D2 (0x69,0x24) 0x44000200 0x00000028 0x00000000 0x00000000
+GPP_D3 (0x69,0x26) 0x44000200 0x00000029 0x00000000 0x00000000
+GPP_D4 (0x69,0x28) 0x44000200 0x0000002a 0x00000000 0x00000000
+GPP_D5 (0x69,0x2A) 0x44000200 0x0000002b 0x00000000 0x00000000
+GPP_D6 (0x69,0x2C) 0x44000200 0x0000002c 0x00000000 0x00000000
+GPP_D7 (0x69,0x2E) 0x44000200 0x0000002d 0x00000000 0x00000000
+GPP_D8 (0x69,0x30) 0x40000300 0x00000000 0x00000000 0x00000000
+GPP_D9 (0x69,0x32) 0x40000700 0x00003c00 0x00000000 0x00000000
+GPP_D10 (0x69,0x34) 0x40000702 0x00003c00 0x00000000 0x00000000
+GPP_D11 (0x69,0x36) 0x40000700 0x00003c00 0x00000000 0x00000000
+GPP_D12 (0x69,0x38) 0x40000702 0x00003c00 0x00000000 0x00000000
+GPP_D13 (0x69,0x3A) 0x40000700 0x00003c00 0x00000000 0x00000000
+GPP_D14 (0x69,0x3C) 0x40000700 0x00003c00 0x00000000 0x00000000
+GPP_D15 (0x69,0x3E) 0x40000700 0x00003c00 0x00000000 0x00000000
+GPP_D16 (0x69,0x40) 0x40000700 0x00003c00 0x00000800 0x00000000
+GPP_D17 (0x69,0x42) 0x40000700 0x00003c00 0x00000000 0x00000000
+GPP_D18 (0x69,0x44) 0x40000700 0x00003c00 0x00000000 0x00000000
+GPP_D19 (0x69,0x46) 0x40000700 0x00003c00 0x00000000 0x00000000
+GPP_D20 (0x69,0x48) 0x40000700 0x00000000 0x00000000 0x00000000
+GPP_D21 (0x69,0x4A) 0x40000700 0x00000000 0x00000000 0x00000000
+GPP_D22 (0x69,0x4C) 0x40000702 0x00000000 0x00000000 0x00000000
+GPP_D23 (0x69,0x4E) 0x40000700 0x00000000 0x00000000 0x00000000
+## HDAUDIO ##
+hdaudioC0D0
+  vendor_name: Realtek
+  chip_name: ALC1220
+  vendor_id: 0x10ec1220
+  subsystem_id: 0x15583702
+  revision_id: 0x100101
+  0x12: 0x90a60130
+  0x14: 0x0421101f
+  0x15: 0x40000000
+  0x16: 0x411111f0
+  0x17: 0x411111f0
+  0x18: 0x04a11040
+  0x19: 0x411111f0
+  0x1a: 0x411111f0
+  0x1b: 0x90170110
+  0x1d: 0x40b7952d
+  0x1e: 0x04451150
+hdaudioC0D2
+  vendor_name: Intel
+  chip_name: Raptorlake HDMI
+  vendor_id: 0x80862818
+  subsystem_id: 0x80860101
+  revision_id: 0x100000
+  0x04: 0x18560010
+  0x06: 0x18560010
+  0x08: 0x18560010
+  0x0a: 0x18560010
+  0x0b: 0x18560010
+  0x0c: 0x18560010
+  0x0d: 0x18560010
+  0x0e: 0x18560010
+  0x0f: 0x18560010
+hdaudioC1D0
+  vendor_name: Nvidia
+  chip_name: Generic HDMI
+  vendor_id: 0x10de00a5
+  subsystem_id: 0x10de0000
+  revision_id: 0x100100
+  0x04: 0x585600f0
+  0x05: 0x185600f0
+  0x06: 0x185600f0
+  0x07: 0x185600f0

models/bonw15-b/coreboot.config

@@ -0,0 +1,19 @@
+CONFIG_VENDOR_SYSTEM76=y
+CONFIG_BOARD_SYSTEM76_BONW15_B=y
+CONFIG_CCACHE=y
+CONFIG_CONSOLE_SERIAL=n
+CONFIG_CPU_MICROCODE_CBFS_DEFAULT_BINS=y
+CONFIG_HAVE_IFD_BIN=y
+CONFIG_HAVE_ME_BIN=y
+CONFIG_IFD_BIN_PATH="$(FIRMWARE_OPEN_MODEL_DIR)/fd.rom"
+CONFIG_ME_BIN_PATH="$(FIRMWARE_OPEN_MODEL_DIR)/me.rom"
+CONFIG_PAYLOAD_ELF=y
+CONFIG_PAYLOAD_FILE="$(FIRMWARE_OPEN_UEFIPAYLOAD)"
+CONFIG_PCIEXP_HOTPLUG_MEM=0x6000000
+CONFIG_PCIEXP_HOTPLUG_PREFETCH_MEM=0x400000000
+CONFIG_POST_IO=n
+CONFIG_SMMSTORE=y
+CONFIG_SMMSTORE_V2=y
+CONFIG_USE_OPTION_TABLE=y
+CONFIG_VALIDATE_INTEL_DESCRIPTOR=y
+#CONFIG_CONSOLE_SYSTEM76_EC=y

models/bonw15-b/ec.config

@@ -0,0 +1 @@
+BOARD=system76/bonw15-b

models/bonw15-b/ecspy.txt

@@ -0,0 +1,89 @@
+id 5570 rev 6
+A0: data 1 mirror 1 pot 0 control 80
+A1: data 0 mirror 0 pot 0 control 00
+A2: data 1 mirror 0 pot 0 control 00
+A3: data 0 mirror 0 pot 0 control 00
+A4: data 0 mirror 1 pot 0 control 00
+A5: data 0 mirror 0 pot 0 control 00
+A6: data 0 mirror 0 pot 0 control 00
+A7: data 0 mirror 0 pot 0 control 00
+B0: data 0 mirror 0 pot 0 control 84
+B1: data 1 mirror 1 pot 0 control 84
+B2: data 1 mirror 1 pot 0 control 84
+B3: data 1 mirror 1 pot 0 control 80
+B4: data 1 mirror 1 pot 0 control 40
+B5: data 1 mirror 1 pot 0 control 40
+B6: data 1 mirror 1 pot 0 control 44
+B7: data 1 mirror 1 pot 0 control 80
+C0: data 1 mirror 1 pot 0 control 80
+C1: data 1 mirror 1 pot 0 control 04
+C2: data 1 mirror 1 pot 0 control 04
+C3: data 0 mirror 0 pot 0 control 04
+C4: data 0 mirror 0 pot 0 control 84
+C5: data 0 mirror 0 pot 0 control 04
+C6: data 1 mirror 1 pot 0 control 40
+C7: data 1 mirror 1 pot 0 control 44
+D0: data 1 mirror 1 pot 0 control 40
+D1: data 1 mirror 1 pot 0 control 44
+D2: data 1 mirror 1 pot 0 control 00
+D3: data 0 mirror 0 pot 0 control 40
+D4: data 0 mirror 0 pot 0 control 40
+D5: data 1 mirror 1 pot 0 control 44
+D6: data 0 mirror 0 pot 0 control 02
+D7: data 1 mirror 1 pot 0 control 02
+E0: data 1 mirror 1 pot 0 control 04
+E1: data 1 mirror 1 pot 0 control 44
+E2: data 1 mirror 1 pot 0 control 84
+E3: data 1 mirror 1 pot 0 control 40
+E4: data 1 mirror 1 pot 0 control 42
+E5: data 1 mirror 1 pot 0 control 40
+E6: data 0 mirror 0 pot 0 control 80
+E7: data 1 mirror 1 pot 0 control 04
+F0: data 0 mirror 0 pot 0 control 44
+F1: data 1 mirror 1 pot 0 control 44
+F2: data 1 mirror 1 pot 0 control 44
+F3: data 1 mirror 1 pot 0 control 40
+F4: data 1 mirror 1 pot 0 control 04
+F5: data 1 mirror 1 pot 0 control 04
+F6: data 1 mirror 1 pot 0 control 40
+F7: data 1 mirror 1 pot 0 control 80
+G0: data 1 mirror 1 pot 0 control 80
+G1: data 1 mirror 1 pot 0 control 40
+G2: data 1 mirror 1 pot 0 control 80
+G3: data 0 mirror 0 pot 0 control 00
+G4: data 0 mirror 0 pot 0 control 00
+G5: data 0 mirror 0 pot 0 control 00
+G6: data 0 mirror 0 pot 0 control 44
+G7: data 0 mirror 0 pot 0 control 00
+H0: data 0 mirror 0 pot 0 control 80
+H1: data 1 mirror 1 pot 0 control 80
+H2: data 0 mirror 0 pot 0 control 44
+H3: data 1 mirror 1 pot 0 control 80
+H4: data 0 mirror 0 pot 0 control 80
+H5: data 0 mirror 0 pot 0 control 44
+H6: data 1 mirror 1 pot 0 control 40
+H7: data 1 mirror 1 pot 0 control 80
+I0: data 0 mirror 0 pot 0 control 00
+I1: data 0 mirror 0 pot 0 control 00
+I2: data 0 mirror 0 pot 0 control 80
+I3: data 0 mirror 0 pot 0 control 00
+I4: data 0 mirror 0 pot 0 control 00
+I5: data 1 mirror 1 pot 0 control 40
+I6: data 0 mirror 0 pot 0 control 00
+I7: data 0 mirror 0 pot 0 control 00
+J0: data 1 mirror 1 pot 0 control 44
+J1: data 1 mirror 1 pot 0 control 40
+J2: data 1 mirror 1 pot 0 control 80
+J3: data 0 mirror 0 pot 0 control 80
+J4: data 1 mirror 1 pot 0 control 40
+J5: data 1 mirror 1 pot 0 control 80
+J6: data 0 mirror 0 pot 0 control 44
+J7: data 0 mirror 0 pot 0 control 84
+M0: data 0 mirror 0 control 06
+M1: data 0 mirror 0 control 06
+M2: data 1 mirror 1 control 06
+M3: data 1 mirror 1 control 06
+M4: data 0 mirror 1 control 06
+M5: data 0 mirror 0 control 00
+M6: data 0 mirror 0 control 86
+M7: data 0 mirror 0 control 00

models/bonw15-b/edk2.config

@@ -0,0 +1,9 @@
+BOOTLOADER=COREBOOT
+DISABLE_SERIAL_TERMINAL=TRUE
+PLATFORM_BOOT_TIMEOUT=2
+PS2_KEYBOARD_ENABLE=TRUE
+SECURE_BOOT_ENABLE=TRUE
+SERIAL_DRIVER_ENABLE=FALSE
+SHELL_TYPE=NONE
+TPM_ENABLE=TRUE
+#SYSTEM76_EC_LOGGING=TRUE