Add System76 Lemur Pro (lemp13)

Change-Id: I805cf4929bc69d50237603d40bab6adb6fbdc862
Signed-off-by: Jeremy Soller <jeremy@system76.com>
This commit is contained in:
Jeremy Soller 2024-03-05 13:59:21 -07:00
parent d876776a6b
commit bcd34461da
25 changed files with 1881 additions and 0 deletions

View File

@ -0,0 +1,90 @@
## SPDX-License-Identifier: GPL-2.0-only
config BOARD_SYSTEM76_MTL_COMMON
def_bool n
select BOARD_ROMSIZE_KB_32768
select DRIVERS_GENERIC_BAYHUB_LV2
select DRIVERS_GENERIC_CBFS_SERIAL
select DRIVERS_GENERIC_CBFS_UUID
select DRIVERS_I2C_HID
select EC_SYSTEM76_EC
select EC_SYSTEM76_EC_LOCKDOWN
select HAVE_ACPI_RESUME
select HAVE_ACPI_TABLES
select HAVE_CMOS_DEFAULT
select HAVE_OPTION_TABLE
select INTEL_GMA_HAVE_VBT
select INTEL_LPSS_UART_FOR_CONSOLE
select MAINBOARD_HAS_TPM2
select MEMORY_MAPPED_TPM
select NO_UART_ON_SUPERIO
select PCIEXP_SUPPORT_RESIZABLE_BARS
select SOC_INTEL_COMMON_BLOCK_HDA_VERB
select SOC_INTEL_CRASHLOG
select SOC_INTEL_METEORLAKE
select SPD_READ_BY_WORD
select SYSTEM_TYPE_LAPTOP
select TPM_RDRESP_NEED_DELAY
config BOARD_SYSTEM76_LEMP13
select BOARD_SYSTEM76_MTL_COMMON
select DRIVERS_I2C_TAS5825M
select HAVE_SPD_IN_CBFS
select SOC_INTEL_METEORLAKE_U_H
select SOC_INTEL_ENABLE_USB4_PCIE_RESOURCES
if BOARD_SYSTEM76_MTL_COMMON
config MAINBOARD_DIR
default "system76/mtl"
config VARIANT_DIR
default "lemp13" if BOARD_SYSTEM76_LEMP13
config OVERRIDE_DEVICETREE
default "variants/\$(CONFIG_VARIANT_DIR)/overridetree.cb"
config MAINBOARD_PART_NUMBER
default "lemp13" if BOARD_SYSTEM76_LEMP13
config MAINBOARD_SMBIOS_PRODUCT_NAME
default "Lemur Pro" if BOARD_SYSTEM76_LEMP13
config MAINBOARD_VERSION
default "lemp13" if BOARD_SYSTEM76_LEMP13
config CMOS_DEFAULT_FILE
default "src/mainboard/\$(MAINBOARDDIR)/cmos.default"
config CONSOLE_POST
default y
config D3COLD_SUPPORT
default n
config DIMM_SPD_SIZE
default 512
config FMDFILE
default "src/mainboard/\$(CONFIG_MAINBOARD_DIR)/variants/\$(CONFIG_VARIANT_DIR)/board.fmd"
config ONBOARD_VGA_IS_PRIMARY
default y
config PCIEXP_DEFAULT_MAX_RESIZABLE_BAR_BITS
default 36
config POST_DEVICE
default n
config TPM_MEASURED_BOOT
default y
config UART_FOR_CONSOLE
default 0
# PM Timer Disabled, saves power
config USE_PM_ACPI_TIMER
default n
endif

View File

@ -0,0 +1,4 @@
## SPDX-License-Identifier: GPL-2.0-only
config BOARD_SYSTEM76_LEMP13
bool "lemp13"

View File

@ -0,0 +1,20 @@
## SPDX-License-Identifier: GPL-2.0-only
CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR)/include
ifeq ($(CONFIG_DRIVERS_GFX_NVIDIA),y)
CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR)/variants/$(VARIANT_DIR)/include
endif
bootblock-y += bootblock.c
bootblock-y += variants/$(VARIANT_DIR)/gpio_early.c
romstage-y += variants/$(VARIANT_DIR)/romstage.c
ramstage-y += ramstage.c
ramstage-y += variants/$(VARIANT_DIR)/hda_verb.c
ramstage-y += variants/$(VARIANT_DIR)/gpio.c
ramstage-y += variants/$(VARIANT_DIR)/ramstage.c
ramstage-$(CONFIG_DRIVERS_I2C_TAS5825M) += variants/$(VARIANT_DIR)/tas5825m.c
SPD_SOURCES = samsung-M425R1GB4BB0-CQKOD

View File

@ -0,0 +1,31 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#include <drivers/intel/gma/acpi/gma.asl>
Scope (GFX0)
{
Name (BRIG, Package (22) {
100, /* default AC */
100, /* default Battery */
5,
10,
15,
20,
25,
30,
35,
40,
45,
50,
55,
60,
65,
70,
75,
80,
85,
90,
95,
100
})
}

View File

@ -0,0 +1,12 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#define EC_GPE_SCI 0x6E
#define EC_GPE_SWI 0x6B
#include <ec/system76/ec/acpi/ec.asl>
Scope (\_SB) {
#include "sleep.asl"
Scope (PCI0) {
#include "backlight.asl"
}
}

View File

@ -0,0 +1,9 @@
/* SPDX-License-Identifier: GPL-2.0-only */
External(\TBTS, MethodObj)
Method(MPTS, 1, Serialized) {
If (CondRefOf(\TBTS)) {
\TBTS()
}
}

View File

@ -0,0 +1,6 @@
Vendor name: System76
Category: laptop
ROM package: WSON-8
ROM protocol: SPI
ROM socketed: n
Flashrom support: y

View File

@ -0,0 +1,9 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#include <bootblock_common.h>
#include <mainboard/gpio.h>
void bootblock_mainboard_early_init(void)
{
mainboard_configure_early_gpios();
}

View File

@ -0,0 +1,5 @@
## SPDX-License-Identifier: GPL-2.0-only
boot_option=Fallback
debug_level=Debug
me_state=Disable

View File

@ -0,0 +1,40 @@
# SPDX-License-Identifier: GPL-2.0-only
entries
0 384 r 0 reserved_memory
# RTC_BOOT_BYTE (coreboot hardcoded)
384 1 e 4 boot_option
388 4 h 0 reboot_counter
# RTC_CLK_ALTCENTURY
400 8 r 0 century
412 4 e 6 debug_level
416 1 e 2 me_state
417 3 h 0 me_state_counter
904 80 h 0 ramtop
984 16 h 0 check_sum
enumerations
2 0 Enable
2 1 Disable
4 0 Fallback
4 1 Normal
6 0 Emergency
6 1 Alert
6 2 Critical
6 3 Error
6 4 Warning
6 5 Notice
6 6 Info
6 7 Debug
6 8 Spew
checksums
checksum 408 983 984

View File

@ -0,0 +1,64 @@
chip soc/intel/meteorlake
register "common_soc_config" = "{
// Touchpad I2C bus
.i2c[0] = {
.speed = I2C_SPEED_FAST,
.rise_time_ns = 80,
.fall_time_ns = 110,
},
}"
# Enable Enhanced Intel SpeedStep
register "eist_enable" = "1"
# Thermal
register "tcc_offset" = "8"
device cpu_cluster 0 on end
device domain 0 on
device ref system_agent on end
device ref igpu on
# DDIA is eDP, TCP2 is HDMI
register "ddi_port_A_config" = "1"
register "ddi_ports_config" = "{
[DDI_PORT_A] = DDI_ENABLE_HPD,
[DDI_PORT_2] = DDI_ENABLE_HPD | DDI_ENABLE_DDC,
}"
register "gfx" = "GMA_DEFAULT_PANEL(0)"
end
device ref pmc_shared_sram on end
device ref cnvi_wifi on
register "cnvi_bt_core" = "true"
register "cnvi_bt_audio_offload" = "true"
chip drivers/wifi/generic
register "wake" = "GPE0_PME_B0"
device generic 0 on end
end
end
device ref i2c1 on
register "serial_io_i2c_mode[PchSerialIoIndexI2C1]" = "PchSerialIoPci"
end
device ref heci1 on end
device ref soc_espi on
register "gen1_dec" = "0x00040069" # EC PM channel
register "gen2_dec" = "0x00fc0e01" # AP/EC command
register "gen3_dec" = "0x00fc0f01" # AP/EC debug
chip drivers/pc80/tpm
device pnp 0c31.0 on end
end
end
device ref p2sb on end
device ref hda on
register "pch_hda_sdi_enable[0]" = "1"
register "pch_hda_audio_link_hda_enable" = "1"
register "pch_hda_idisp_codec_enable" = "1"
register "pch_hda_idisp_link_frequency" = "HDA_LINKFREQ_96MHZ"
register "pch_hda_idisp_link_tmode" = "HDA_TMODE_8T"
end
device ref smbus on end
device ref fast_spi on end
end
end

View File

@ -0,0 +1,36 @@
/* SPDX-License-Identifier: GPL-2.0-only */
//TODO: HACK FOR MISSING MISCCFG_GPIO_PM_CONFIG_BITS
#include <soc/gpio.h>
#include <acpi/acpi.h>
DefinitionBlock(
"dsdt.aml",
"DSDT",
ACPI_DSDT_REV_2,
OEM_ID,
ACPI_TABLE_CREATOR,
0x20110725
)
{
#include <acpi/dsdt_top.asl>
#include <soc/intel/common/block/acpi/acpi/platform.asl>
#include <soc/intel/common/block/acpi/acpi/globalnvs.asl>
#include <cpu/intel/common/acpi/cpu.asl>
Device (\_SB.PCI0)
{
#include <soc/intel/common/block/acpi/acpi/northbridge.asl>
#include <soc/intel/meteorlake/acpi/southbridge.asl>
#include <soc/intel/meteorlake/acpi/tcss.asl>
}
#include <southbridge/intel/common/acpi/sleepstates.asl>
Scope (\_SB.PCI0.LPCB)
{
#include <drivers/pc80/pc/ps2_controller.asl>
}
#include "acpi/mainboard.asl"
}

View File

@ -0,0 +1,9 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#ifndef MAINBOARD_GPIO_H
#define MAINBOARD_GPIO_H
void mainboard_configure_early_gpios(void);
void mainboard_configure_gpios(void);
#endif

View File

@ -0,0 +1,13 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#include <mainboard/gpio.h>
#include <soc/ramstage.h>
static void mainboard_init(void *chip_info)
{
mainboard_configure_gpios();
}
struct chip_operations mainboard_ops = {
.init = mainboard_init,
};

View File

@ -0,0 +1,33 @@
# Samsung M425R1GB4BB0-CQKOD
30 10 12 03 04 00 40 42 00 00 00 00 90 02 00 00
00 00 00 00 A0 01 F2 03 7A 0D 00 00 00 00 80 3E
80 3E 80 3E 00 7D 80 BB 30 75 27 01 A0 00 82 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 88 13 08 88 13 08 20 4E 20 10
27 10 1A 41 28 10 27 10 C4 09 04 4C 1D 0C 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10 00 80 B3 80 21 80 B3 82 20 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 0F 01 02 81 00 22 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 09 D1

View File

@ -0,0 +1,12 @@
FLASH 32M {
SI_DESC 16K
SI_ME 10128K
SI_BIOS@16M 16M {
RW_MRC_CACHE 64K
SMMSTORE(PRESERVE) 256K
WP_RO {
FMAP 4K
COREBOOT(CBFS)
}
}
}

View File

@ -0,0 +1,2 @@
Board name: lemp13
Release year: 2024

Binary file not shown.

View File

@ -0,0 +1,208 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#include <mainboard/gpio.h>
#include <soc/gpio.h>
static const struct pad_config gpio_table[] = {
PAD_CFG_NF(GPP_A00, UP_20K, DEEP, NF1), // ESPI_IO0_EC
PAD_CFG_NF(GPP_A01, UP_20K, DEEP, NF1), // ESPI_IO1_EC
PAD_CFG_NF(GPP_A02, UP_20K, DEEP, NF1), // ESPI_IO2_EC
PAD_CFG_NF(GPP_A03, UP_20K, DEEP, NF1), // ESPI_IO3_EC
PAD_CFG_NF(GPP_A04, UP_20K, DEEP, NF1), // ESPI_CS_EC#
PAD_CFG_NF(GPP_A05, UP_20K, DEEP, NF1), // ESPI_CLK_EC
PAD_CFG_NF(GPP_A06, NONE, DEEP, NF1), // ESPI_RESET#
PAD_NC(GPP_A07, NONE),
PAD_NC(GPP_A08, NONE),
PAD_NC(GPP_A09, NONE),
PAD_NC(GPP_A10, NONE),
PAD_CFG_GPO(GPP_A11, 0, PLTRST),
PAD_NC(GPP_A12, NONE),
PAD_CFG_TERM_GPO(GPP_A13, 1, UP_20K, PLTRST),
PAD_CFG_TERM_GPO(GPP_A14, 0, UP_20K, PLTRST),
PAD_CFG_TERM_GPO(GPP_A15, 0, UP_20K, PLTRST),
PAD_CFG_NF(GPP_A16, UP_20K, DEEP, NF1),
PAD_CFG_GPI_INT(GPP_A17, NONE, PLTRST, LEVEL), // TP_ATTN#
PAD_CFG_TERM_GPO(GPP_A18, 0, UP_20K, PLTRST),
PAD_CFG_TERM_GPO(GPP_A19, 0, UP_20K, DEEP),
PAD_CFG_TERM_GPO(GPP_A20, 0, NATIVE, DEEP),
PAD_CFG_NF(GPP_A21, NATIVE, DEEP, NF1),
_PAD_CFG_STRUCT(GPP_B00, 0x40100100, 0x0000),
PAD_CFG_GPO(GPP_B01, 0, PLTRST),
PAD_CFG_GPO(GPP_B02, 0, PLTRST),
PAD_CFG_GPO(GPP_B03, 0, PLTRST),
PAD_CFG_GPO(GPP_B04, 0, PLTRST),
PAD_CFG_GPO(GPP_B05, 1, PLTRST),
PAD_CFG_GPO(GPP_B06, 0, DEEP),
PAD_CFG_GPO(GPP_B07, 1, DEEP),
PAD_CFG_GPO(GPP_B08, 1, DEEP),
PAD_CFG_GPI(GPP_B09, NONE, DEEP),
PAD_CFG_GPI(GPP_B10, NONE, DEEP),
PAD_CFG_NF(GPP_B11, NONE, DEEP, NF2), // CPU_HDMI_HPD
PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_B13, NONE, PLTRST, NF1),
PAD_CFG_GPO(GPP_B14, 0, PLTRST),
PAD_CFG_GPI(GPP_B15, NONE, DEEP),
PAD_CFG_GPI(GPP_B16, NONE, DEEP),
PAD_CFG_GPO(GPP_B17, 1, PLTRST), // HDMI_EN
PAD_CFG_GPO(GPP_B18, 1, PLTRST),
PAD_CFG_GPO(GPP_B19, 1, PLTRST),
PAD_CFG_GPO(GPP_B20, 1, PLTRST),
PAD_CFG_GPO(GPP_B21, 0, PLTRST),
PAD_CFG_GPI(GPP_B22, NONE, DEEP),
PAD_CFG_GPO(GPP_B23, 1, DEEP),
PAD_CFG_NF(GPP_C00, NONE, DEEP, NF1), // SMB_CLK_DDR
PAD_CFG_NF(GPP_C01, NONE, DEEP, NF1), // SMB_DATA_DDR
PAD_CFG_NF(GPP_C02, NONE, DEEP, NF1), // GPP_C2_STRAP
PAD_CFG_NF(GPP_C03, UP_20K, DEEP, NF1), // SML0_CLK
PAD_CFG_NF(GPP_C04, UP_20K, DEEP, NF1), // SML0_DATA
PAD_CFG_NF(GPP_C05, UP_20K, DEEP, NF1), // GPP_C5_STRAP
PAD_CFG_NF(GPP_C06, UP_20K, DEEP, NF1), // TBT_I2C_SCL
PAD_CFG_NF(GPP_C07, UP_20K, DEEP, NF1), // TBT_I2C_SDA
PAD_CFG_NF(GPP_C08, NONE, DEEP, NF1), // GPP_C08_TEST
PAD_CFG_NF(GPP_C09, NONE, DEEP, NF1), // CARD_CLKREQ
PAD_CFG_GPO(GPP_C10, 0, PLTRST), // 5G_PCIE_CLKREQ
PAD_CFG_NF(GPP_C11, NONE, PWROK, NF1), // WLAN_CLKREQ
PAD_CFG_NF(GPP_C12, NONE, PWROK, NF1), // GPP_C13-TEST (typo from schematic)
PAD_CFG_GPO(GPP_C13, 1, DEEP),
PAD_CFG_NF(GPP_C14, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_C15, NONE, DEEP, NF1), // GPP_C15
// GPP_C16 (TBTA_LSX0_TXD) configured by FSP
// GPP_C17 (TBTA_LSX0_RXD) configured by FSP
// GPP_C18 not connected
// GPP_C19 not connected
PAD_CFG_NF(GPP_C20, NONE, DEEP, NF2), // HDMI_CTRLCLK
PAD_CFG_NF(GPP_C21, NONE, DEEP, NF2), // HDMI_CTRLDATA
// GPP_C22 not connected
// GPP_C23 not connected
PAD_CFG_GPO(GPP_D00, 1, PLTRST),
PAD_CFG_GPO(GPP_D01, 1, PLTRST),
PAD_CFG_GPO(GPP_D02, 1, PLTRST),
PAD_NC(GPP_D03, NONE),
PAD_CFG_GPO(GPP_D04, 0, PLTRST),
PAD_CFG_GPO(GPP_D05, 1, PLTRST),
PAD_CFG_GPO(GPP_D06, 0, PLTRST),
PAD_CFG_GPO(GPP_D07, 0, PLTRST),
PAD_CFG_GPO(GPP_D08, 0, PLTRST),
PAD_CFG_GPO(GPP_D09, 0, PLTRST),
PAD_CFG_NF(GPP_D10, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_D11, NATIVE, DEEP, NF1),
PAD_CFG_NF(GPP_D12, NATIVE, DEEP, NF1),
PAD_CFG_NF(GPP_D13, NATIVE, DEEP, NF1),
PAD_CFG_GPO(GPP_D14, 0, PLTRST),
PAD_CFG_GPO(GPP_D15, 0, PLTRST),
PAD_CFG_GPO(GPP_D16, 0, DEEP),
PAD_CFG_NF(GPP_D17, NONE, DEEP, NF1),
PAD_NC(GPP_D18, NONE), // GPP_D18-TEST
PAD_CFG_NF(GPP_D19, NONE, DEEP, NF1), // SSD2_CLKREQ
PAD_CFG_NF(GPP_D20, NONE, DEEP, NF1), // SSD1_CLKREQ
PAD_CFG_NF(GPP_D21, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_D22, NATIVE, DEEP, NF1),
PAD_CFG_NF(GPP_D23, NATIVE, DEEP, NF1),
PAD_CFG_GPO(GPP_E00, 0, PLTRST),
_PAD_CFG_STRUCT(GPP_E01, 0x40100100, 0x1000),
PAD_CFG_GPI(GPP_E02, NONE, DEEP),
PAD_NC(GPP_E03, NONE),
PAD_CFG_GPO(GPP_E04, 0, PLTRST),
PAD_CFG_GPO(GPP_E05, 0, PLTRST),
PAD_CFG_GPI(GPP_E06, NONE, DEEP),
PAD_CFG_GPO(GPP_E07, 0, PLTRST),
PAD_CFG_GPO(GPP_E08, 0, PLTRST),
PAD_CFG_GPI(GPP_E09, NONE, DEEP),
PAD_CFG_GPO(GPP_E10, 0, PLTRST),
PAD_CFG_GPI(GPP_E11, NONE, DEEP),
_PAD_CFG_STRUCT(GPP_E12, 0x84002200, 0x0000),
_PAD_CFG_STRUCT(GPP_E13, 0x44002100, 0x0000),
PAD_CFG_NF(GPP_E14, NONE, DEEP, NF1),
PAD_CFG_GPO(GPP_E15, 0, PLTRST),
PAD_CFG_NF(GPP_E16, NONE, DEEP, NF2),
PAD_CFG_GPO(GPP_E17, 0, PLTRST),
PAD_NC(GPP_E18, NONE),
PAD_NC(GPP_E19, NONE),
PAD_NC(GPP_E20, NONE),
PAD_NC(GPP_E21, NONE),
PAD_CFG_TERM_GPO(GPP_E22, 0, DN_20K, PLTRST),
PAD_CFG_NF(GPP_F00, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_F01, UP_20K, DEEP, NF1),
PAD_CFG_NF(GPP_F02, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_F03, UP_20K, DEEP, NF1),
PAD_CFG_NF(GPP_F04, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_F05, NONE, DEEP, NF3),
PAD_CFG_NF(GPP_F06, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_F07, DN_20K, DEEP, NF1),
PAD_CFG_NF(GPP_F08, DN_20K, DEEP, NF1),
PAD_CFG_GPI(GPP_F09, NONE, DEEP),
PAD_NC(GPP_F10, NONE),
PAD_CFG_GPO(GPP_F11, 0, PLTRST),
_PAD_CFG_STRUCT(GPP_F12, 0x44002300, 0x0000), // AMP_SMB_CLK
_PAD_CFG_STRUCT(GPP_F13, 0x44002300, 0x0000), // AMP_SMB_DATA
PAD_CFG_GPO(GPP_F14, 0, PLTRST),
PAD_CFG_GPO(GPP_F15, 0, PLTRST),
PAD_CFG_GPO(GPP_F16, 0, PLTRST),
PAD_CFG_GPO(GPP_F17, 0, PLTRST),
PAD_CFG_GPO(GPP_F18, 0, DEEP),
PAD_CFG_GPO(GPP_F19, 0, PLTRST),
PAD_CFG_GPO(GPP_F20, 0, PLTRST),
PAD_CFG_GPO(GPP_F21, 0, PLTRST),
PAD_CFG_GPO(GPP_F22, 0, PLTRST),
PAD_CFG_GPO(GPP_F23, 0, PLTRST),
PAD_CFG_GPO(GPP_H00, 0, PLTRST),
PAD_CFG_GPO(GPP_H01, 0, PLTRST),
PAD_CFG_GPO(GPP_H02, 1, PLTRST),
PAD_NC(GPP_H03, NONE),
PAD_NC(GPP_H04, NONE),
PAD_NC(GPP_H05, NONE),
PAD_NC(GPP_H06, NONE),
PAD_NC(GPP_H07, NONE),
PAD_NC(GPP_H08, NONE),
PAD_NC(GPP_H09, NONE),
PAD_CFG_GPO(GPP_H10, 0, PLTRST),
PAD_CFG_GPO(GPP_H11, 0, PLTRST),
PAD_NC(GPP_H12, NONE),
PAD_CFG_NF(GPP_H13, NONE, DEEP, NF1),
PAD_CFG_GPO(GPP_H14, 0, PLTRST),
PAD_CFG_GPO(GPP_H15, 0, PLTRST),
PAD_CFG_GPO(GPP_H16, 0, PLTRST),
PAD_CFG_GPO(GPP_H17, 0, PLTRST),
PAD_NC(GPP_H18, NONE),
PAD_CFG_NF(GPP_H19, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_H20, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_H21, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_H22, NONE, DEEP, NF1),
PAD_CFG_GPO(GPP_S00, 0, PLTRST),
PAD_CFG_GPO(GPP_S01, 0, PLTRST),
PAD_CFG_GPO(GPP_S02, 0, PLTRST),
PAD_CFG_GPO(GPP_S03, 0, PLTRST),
PAD_CFG_GPO(GPP_S04, 0, PLTRST),
PAD_CFG_GPO(GPP_S05, 0, PLTRST),
PAD_CFG_NF(GPP_S06, NONE, DEEP, NF3),
PAD_CFG_NF(GPP_S07, NONE, DEEP, NF3),
PAD_CFG_NF(GPP_V00, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_V01, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_V02, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_V03, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_V04, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_V05, UP_20K, DEEP, NF1),
PAD_CFG_NF(GPP_V06, NATIVE, DEEP, NF1),
PAD_CFG_GPI(GPP_V07, NATIVE, DEEP),
PAD_CFG_NF(GPP_V08, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_V09, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_V10, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_V11, NONE, DEEP, NF1),
PAD_NC(GPP_V12, NONE),
PAD_CFG_NF(GPP_V13, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_V14, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_V15, NONE, PLTRST, NF1),
PAD_CFG_GPO(GPP_V16, 0, PLTRST),
PAD_CFG_GPO(GPP_V17, 0, PLTRST),
PAD_NC(GPP_V18, NONE),
PAD_CFG_NF(GPP_V19, NONE, DEEP, NF1),
PAD_NC(GPP_V20, NONE),
PAD_NC(GPP_V21, NONE),
PAD_NC(GPP_V22, NONE),
PAD_NC(GPP_V23, NONE),
};
void mainboard_configure_gpios(void)
{
gpio_configure_pads(gpio_table, ARRAY_SIZE(gpio_table));
}

View File

@ -0,0 +1,16 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#include <mainboard/gpio.h>
#include <soc/gpio.h>
static const struct pad_config early_gpio_table[] = {
PAD_CFG_NF(GPP_C00, NONE, DEEP, NF1), // SMB_CLK
PAD_CFG_NF(GPP_C01, NONE, DEEP, NF1), // SMB_DATA
PAD_CFG_NF(GPP_H08, NONE, DEEP, NF1), // UART0_RX
PAD_CFG_NF(GPP_H09, NONE, DEEP, NF1), // UART0_TX
};
void mainboard_configure_early_gpios(void)
{
gpio_configure_pads(early_gpio_table, ARRAY_SIZE(early_gpio_table));
}

View File

@ -0,0 +1,50 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#include <device/azalia_device.h>
const u32 cim_verb_data[] = {
/* Realtek, ALC245 */
0x10ec0245, /* Vendor ID */
0x15582624, /* Subsystem ID */
34, /* Number of entries */
AZALIA_SUBVENDOR(0, 0x15582624),
AZALIA_RESET(1),
AZALIA_PIN_CFG(0, 0x12, 0x90a60130),
AZALIA_PIN_CFG(0, 0x13, 0x40000000),
AZALIA_PIN_CFG(0, 0x14, 0x411111f0),
AZALIA_PIN_CFG(0, 0x17, 0x90170110),
AZALIA_PIN_CFG(0, 0x18, 0x411111f0),
AZALIA_PIN_CFG(0, 0x19, 0x411111f0),
AZALIA_PIN_CFG(0, 0x1a, 0x411111f0),
AZALIA_PIN_CFG(0, 0x1b, 0x411111f0),
AZALIA_PIN_CFG(0, 0x1d, 0x40689b2d),
AZALIA_PIN_CFG(0, 0x1e, 0x411111f0),
AZALIA_PIN_CFG(0, 0x21, 0x04211020),
0x05b50006, 0x05b40011, 0x0205001a, 0x0204810b,
0x0205004a, 0x02042010, 0x02050038, 0x02046909,
0x05c50000, 0x05c43d82, 0x05c50000, 0x05c43d82,
0x05350000, 0x0534201a, 0x05350000, 0x0534201a,
0x0535001d, 0x05340800, 0x0535001e, 0x05340800,
0x05350003, 0x05341ec4, 0x05350004, 0x05340000,
0x05450000, 0x05442000, 0x0545001d, 0x05440800,
0x0545001e, 0x05440800, 0x05450003, 0x05441ec4,
0x05450004, 0x05440000, 0x05350000, 0x0534a01a,
0x0205003c, 0x0204f175, 0x0205003c, 0x0204f135,
0x02050040, 0x02048800, 0x05a50001, 0x05a4001f,
0x02050010, 0x02040020, 0x02050010, 0x02040020,
0x0205006b, 0x0204a390, 0x0205006b, 0x0204a390,
0x0205006c, 0x02040c9e, 0x0205006d, 0x02040c00,
0x00170500, 0x00170500, 0x05a50004, 0x05a40113,
0x02050008, 0x02046a8c, 0x02050076, 0x0204f000,
0x0205000e, 0x020465c0, 0x02050033, 0x02048580,
0x02050069, 0x0204fda8, 0x02050068, 0x02040000,
0x02050003, 0x02040002, 0x02050069, 0x02040000,
0x02050068, 0x02040001, 0x0205002e, 0x0204290e,
0x02050010, 0x02040020, 0x02050010, 0x02040020,
};
const u32 pc_beep_verbs[] = {};
AZALIA_ARRAY_SIZES;

View File

@ -0,0 +1,120 @@
chip soc/intel/meteorlake
#TODO: POWER LIMITS
#register "power_limits_config[RPL_P_282_242_142_15W_CORE]" = "{
# .tdp_pl1_override = 15,
# .tdp_pl2_override = 46,
#}"
device domain 0 on
subsystemid 0x1558 0x2624 inherit
device ref tbt_pcie_rp0 on end
device ref tcss_xhci on
register "tcss_ports[0]" = "TCSS_PORT_DEFAULT(OC_SKIP)"
#TODO: TCP1 is used as USB Type-A
register "tcss_ports[1]" = "TCSS_PORT_DEFAULT(OC_SKIP)"
#TODO: TCP2 is used as HDMI
#TODO: TCP3 goes to redriver, then mux, then USB Type-C
register "tcss_ports[3]" = "TCSS_PORT_DEFAULT(OC_SKIP)"
chip drivers/usb/acpi
device ref tcss_root_hub on
chip drivers/usb/acpi
register "desc" = ""TBT Type-C""
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
device ref tcss_usb3_port0 on end
end
chip drivers/usb/acpi
register "desc" = ""USB Type-A""
register "type" = "UPC_TYPE_USB3_A"
device ref tcss_usb3_port1 on end
end
chip drivers/usb/acpi
register "desc" = ""USB Type-C""
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
device ref tcss_usb3_port3 on end
end
end
end
end
device ref tcss_dma0 on end
device ref xhci on
register "usb2_ports" = "{
[0] = USB2_PORT_MID(OC_SKIP), /* TODO: USB TYPEA port1 GEN2 */
[1] = USB2_PORT_MID(OC_SKIP), /* TODO: USB TYPEA port2 GEN1 */
[2] = USB2_PORT_TYPE_C(OC_SKIP), /* TODO: TBT TYPEC USB2.0 */
[4] = USB2_PORT_TYPE_C(OC_SKIP), /* TODO: TYPEC USB2.0 */
[6] = USB2_PORT_MID(OC_SKIP), /* Camera */
[9] = USB2_PORT_MID(OC_SKIP), /* Bluetooth */
}"
register "usb3_ports" = "{
[0] = USB3_PORT_DEFAULT(OC_SKIP), /* TODO: USB port1 GEN1 */
}"
end
device ref i2c0 on
# Touchpad I2C bus
register "serial_io_i2c_mode[PchSerialIoIndexI2C0]" = "PchSerialIoPci"
chip drivers/i2c/hid
register "generic.hid" = ""ELAN0412""
register "generic.desc" = ""ELAN Touchpad""
register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_A17)"
register "generic.detect" = "1"
register "hid_desc_reg_offset" = "0x01"
device i2c 15 on end
end
chip drivers/i2c/hid
register "generic.hid" = ""FTCS1000""
register "generic.desc" = ""FocalTech Touchpad""
register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_A17)"
register "generic.detect" = "1"
register "hid_desc_reg_offset" = "0x01"
device i2c 38 on end
end
end
device ref i2c5 on
# Smart Amplifier I2C bus
register "serial_io_i2c_mode[PchSerialIoIndexI2C5]" = "PchSerialIoPci"
chip drivers/i2c/tas5825m
register "id" = "0"
device i2c 4e on end # (8bit address: 0x9c)
end
end
device ref pcie_rp1 on
# PCH RP#1 x1, Clock 0 (CARD)
register "pcie_rp[PCH_RP(1)]" = "{
.clk_src = 0,
.clk_req = 0,
.flags = PCIE_RP_LTR | PCIE_RP_AER,
}"
end
device ref pcie_rp2 on
# PCH RP#2 x1, Clock 2 (WLAN)
register "pcie_rp[PCH_RP(2)]" = "{
.clk_src = 2,
.clk_req = 2,
.flags = PCIE_RP_LTR | PCIE_RP_AER,
}"
end
device ref pcie_rp10 on
# PCH RP#10 x4, Clock 7 (SSD2)
# This uses signals PCIE_13 through PCIE_16 in the schematics
# but is identified as root port 10 in firmware.
register "pcie_rp[PCH_RP(10)]" = "{
.clk_src = 7,
.clk_req = 7,
.flags = PCIE_RP_LTR | PCIE_RP_AER,
}"
end
device ref pcie_rp11 on
# CPU RP#11 x4, Clock 8 (SSD1)
# This uses signals PCIE_17 through PCIE_20 in the schematics
# but is identified as root port 11 in firmware.
register "pcie_rp[PCIE_RP(11)]" = "{
.clk_src = 8,
.clk_req = 8,
.flags = PCIE_RP_LTR | PCIE_RP_AER,
}"
end
end
end

View File

@ -0,0 +1,19 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#include <soc/ramstage.h>
void mainboard_silicon_init_params(FSP_S_CONFIG *params)
{
// TODO: Pin Mux settings
// Enable TCP1 and TCP3 USB-A conversion
// BIT 0:3 is mapping to PCH XHCI USB2 port
// BIT 4:5 is reserved
// BIT 6 is orientational
// BIT 7 is enable
params->EnableTcssCovTypeA[1] = 0x81;
params->EnableTcssCovTypeA[3] = 0x85;
// Enable reporting CPU C10 state over eSPI.
params->PchEspiHostC10ReportEnable = 1;
}

View File

@ -0,0 +1,24 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#include <soc/meminit.h>
#include <soc/romstage.h>
void mainboard_memory_init_params(FSPM_UPD *mupd)
{
const struct mb_cfg board_cfg = {
.type = MEM_TYPE_DDR5,
.ect = true,
.LpDdrDqDqsReTraining = 1,
};
const struct mem_spd spd_info = {
.topo = MEM_TOPO_MIXED,
.cbfs_index = 0,
.smbus[1] = { .addr_dimm[0] = 0x52, },
};
const bool half_populated = false;
mupd->FspmConfig.DmiMaxLinkSpeed = 4;
mupd->FspmConfig.GpioOverride = 0;
memcfg_init(mupd, &board_cfg, &spd_info, half_populated);
}

File diff suppressed because it is too large Load Diff