The front status LED on the Librem Mini is driven by the SATALED# GPIO
line configured for native function, so only shows disk activity for
SATA drives, but not NVMe. To allow it to show disk activity for NVMe
drives as well, reconfigure the GPIO as GPIO-OUT (rather than native
function), and configure it via ACPI so that the linux gpio-leds
driver will attach and use it accordingly.
This has the added benefit of allowing the user to reconfigure the
LED as they see fit via sysfs.
Test: boot Linux (PureOS) on Librem Mini v2 with NVMe drive, observe status
LED blinks during periods of disk activity (tested via 'stress').
Change-Id: I34c2a5f3fd1038266f4514544abfc1020da6f85b
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
According to Intel TA#724456, work around the higher SoC power
consumption in S0iX when CNVI has background activity.
BUG=b:201263040
TEST=Turn on this setting and build and verify on Drawcia.
The SLP_S0 toggling become slower or gone at the same CNVI
background activity.
Change-Id: I56439a406547e2ee1e47d34be14ecc9a8df04693
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63675
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Commit 3e1943ec46 (soc/amd/cezanne: Force
resets to be cold) forced all resets on Cezanne to be cold resets to
work around a bug. Since the bug is fixed on Sabrina, this workaround
copied over from the Cezanne code isn't needed here, so sort-of revert
what the patch referenced above changed for Cezanne in the Sabrina code.
BUG=b:229105416
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I785e43124a9a969eeb129454e6e15dc245625250
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63741
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Break TPM related Kconfig into the following dimensions:
TPM transport support:
config CRB_TPM
config I2C_TPM
config SPI_TPM
config MEMORY_MAPPED_TPM (new)
TPM brand, not defining any of these is valid, and result in "generic" support:
config TPM_ATMEL (new)
config TPM_GOOGLE (new)
config TPM_GOOGLE_CR50 (new, implies TPM_GOOGLE)
config TPM_GOOGLE_TI50 (new to be used later, implies TPM_GOOGLE)
What protocol the TPM chip supports:
config MAINBOARD_HAS_TPM1
config MAINBOARD_HAS_TPM2
What the user chooses to compile (restricted by the above):
config NO_TPM
config TPM1
config TPM2
The following Kconfigs will be replaced as indicated:
config TPM_CR50 -> TPM_GOOGLE
config MAINBOARD_HAS_CRB_TPM -> CRB_TPM
config MAINBOARD_HAS_I2C_TPM_ATMEL -> I2C_TPM && TPM_ATMEL
config MAINBOARD_HAS_I2C_TPM_CR50 -> I2C_TPM && TPM_GOOGLE
config MAINBOARD_HAS_I2C_TPM_GENERIC -> I2C_TPM && !TPM_GOOGLE && !TPM_ATMEL
config MAINBOARD_HAS_LPC_TPM -> MEMORY_MAPPED_TPM
config MAINBOARD_HAS_SPI_TPM -> SPI_TPM && !TPM_GOOGLE && !TPM_ATMEL
config MAINBOARD_HAS_SPI_TPM_CR50 -> SPI_TPM && TPM_GOOGLE
Signed-off-by: Jes B. Klinke <jbk@chromium.org>
Change-Id: I4656b2b90363b8dfd008dc281ad591862fe2cc9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63424
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Fix WLAN PCIE speed to GEN2. Dynamic switching between speeds is causing
the PSP to hang when resuming from S0ix suspend. The root cause is still
under investigation. Just disabling PSPP fixes the hang but causes poor
PLT performance.
BUG=b:228830362
BRANCH=guybrush
TEST=suspend_stress_test on AC and DC
Change-Id: I988365e51aca0d6515c5605b3032521cf59d8d30
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63722
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Alder Lake-N has single memory controller with 64-bit bus width. Alder
Lake common meminit block driver considers bus width to be 128-bit and
populates the meminit data accordingly. By setting half_populated to
true, only the bottom half is populated.
Ideally, half_populated is used in platforms with multiple channels to
enable only one half of the channel. Alder Lake N has single channel,
and it would require for new structures to be defined in meminit block
driver for LPx memory configurations. In order to avoid adding new
structures, set half_populated to true. This has the same effect as
having single channel with 64-bit width.
BRANCH=NONE
TEST=Build and boot ADL-N RVP.
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I2ecc3018a1ab039990ba47898ff0e0e2ede695cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62913
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Looks like the `notify_data` struct array idea comes from the FSP 2.0
notify driver, which has a similar struct but with several additional
fields. However, there's no need for this mechanism in the CSE driver
because the struct only contains a condition (boolean) and a function
to execute, which can be expressed as a regular if-block.
Change-Id: I65fcb2fc02ea16b37c764f1fd69bdff3382fad18
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63708
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Create the osiris variant of the brya0 reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:229352299
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_OSIRIS
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I41e088a3415add86cba87c919af23494f816bb24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63650
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The PCI Local Bus Specification Revision 3.0 requires that
multi-function devices always implement function 0. Because of
this, enabling UFS (PCI device 12.7) requires ISH (PCI device 12.0)
to be enabled as well.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: Ia8b9561973640edc5f7d0f579dd640e805c0af17
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
In order to enable the UFS controller (PCI device 12.7), the PCI
specification says that the device at function 0 in the same slot must
also be enabled, which is the ISH. Therefore, this CL enables both
the UFS controller and ISH.
TEST=Boot to kernel and check lspci output
00:12.0 Serial controller: Intel Corporation Device 54fc
00:12.7 Mass storage controller [0109]: Intel Corporation
Device 54ff
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Change-Id: If15bcaffc8fd3bbbe4b181820993ab2d882bbbe1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62662
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The `_PRS` ACPI object is not needed for static (non-configurable)
devices. For devices where `_CRS` always provides the same set of
resource settings, drop the `_PRS` object. Note that every dropped
`_PRS` object only provides one set of resource settings, which is
identical to the resource settings provided by the `_CRS` object.
Also, drop `IGNORE_IASL_MISSING_DEPENDENCY` as it's no longer needed.
Change-Id: If56267e8a68897236d5ff73322317cbef7ab2243
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The `_PRS` ACPI object is not needed for static (non-configurable)
devices. For devices where `_CRS` always provides the same set of
resource settings, drop the `_PRS` object. Note that every dropped
`_PRS` object only provides one set of resource settings, which is
identical to the resource settings provided by the `_CRS` object.
The no-op `_DIS` methods can also be removed for the same reason.
Also, drop `IGNORE_IASL_MISSING_DEPENDENCY` as it's no longer needed.
Change-Id: I7e702e9318fbf68dbd883a145111e6beb6815b8b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The `_PRS` ACPI object is not needed for static (non-configurable)
devices. For devices where `_CRS` always provides the same set of
resource settings, drop the `_PRS` object. Note that every dropped
`_PRS` object only provides one set of resource settings, which is
identical to the resource settings provided by the `_CRS` object.
Also, drop `IGNORE_IASL_MISSING_DEPENDENCY` as it's no longer needed.
Change-Id: Ic37608ac9622b37cae6d81045740a033e9aa9d4f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63526
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The `_PRS` ACPI object is not needed for static (non-configurable)
devices. For devices where `_CRS` always provides the same set of
resource settings, drop the `_PRS` object. Note that every dropped
`_PRS` object only provides one set of resource settings, which is
identical to the resource settings provided by the `_CRS` object.
Change-Id: Ief40e790fdee336fd6c786e18cd01c41fa658c2c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63521
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
The `_PRS` ACPI object is not needed for static (non-configurable)
devices. For devices where `_CRS` always provides the same set of
resource settings, drop the `_PRS` object. Note that every dropped
`_PRS` object only provides one set of resource settings, which is
identical to the resource settings provided by the `_CRS` object.
In addition, drop `IGNORE_IASL_MISSING_DEPENDENCY` from the two
mainboards using the MEC1308 code, `samsung/{lumpy, stumpy}`.
Change-Id: I5d5cdc28c2cfaa5dfcffd656060b931208977386
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63523
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The `_PRS` ACPI object is not needed for static (non-configurable)
devices. For devices where `_CRS` always provides the same set of
resource settings, drop the `_PRS` object. Note that every dropped
`_PRS` object only provides one set of resource settings, which is
identical to the resource settings provided by the `_CRS` object.
In addition, drop `IGNORE_IASL_MISSING_DEPENDENCY` from the only
mainboard using the SCH5545 code, `dell/snb_ivb_workstations`.
Change-Id: Ic462bd3dfa287744d4f733561de81c09c1c397e6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63522
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The `_PRS` ACPI object is not needed for static (non-configurable)
devices. For devices where `_CRS` always provides the same set of
resource settings, drop the `_PRS` object. Note that every dropped
`_PRS` object only provides one set of resource settings, which is
identical to the resource settings provided by the `_CRS` object.
The no-op `_DIS` methods can also be removed for the same reason.
Also, drop `IGNORE_IASL_MISSING_DEPENDENCY` as it's no longer needed.
Change-Id: I71275f2581b999d606f36773578b36dbdccf6452
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63524
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Add PROP method under \_SB.DPTF.TPWR scope which will return static
worst case rest of platform power in miliWatts.
This value is static, which has to configured from devicetree of
overridetree for each platform
BUG=b:205928013
TEST=Build, boot brya0 and dump SSDT to check PROP method
Scope (\_SB)
{
Device (DPTF)
{
Device (TPWR)
{
Method (PROP, 0, Serialized)
{
Return (XXXX)
}
}
}
}
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: I1415d2a9eb55cfadc3a7b41b53ecbec657002759
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
