ConSplitterDxe uses the intersection of all outputs, which includes
serial, for the list of supported text modes. When serial output is
supported, this slows down performance and limits the size of
FrontPage.
Only enable edk2's serial support when it's a debug build as
it's the only case where there will be debug output.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ic3633767dabb3543e865aa65c4101840a7b69cc1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
FLASH_DUAL_READ is a common configuration for all MediaTek SoCs, so we
move it to common folder and select it in SoCs' Kconfig.
As suggested in CB:58837, we also rename FLASH_DUAL_READ to
FLASH_DUAL_IO_READ to reduce confusion.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: If267a332519412a7919c5b7817047fabe4a564c8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65620
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
There are more and more variables which are SoC-specific, so add
soc/wdt.h for each SoC and rename common/wdt.h to
common/wdt_common.h.
wdt_set_req() is almost the same for mt8192, mt8195 and mt8186, so
move it to a common file wdt_req.c.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I7a334b3e7cd4f24a848dd31aca546dc7236d5fb8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65636
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Sabrina previously didn't support UART mapping in psp verstage. Now that it has been enabled, add the relevant uart code here.
BUG=b:218709292
TEST=Set serial soft fuse, boot to kernel, check logs
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I591fa69b6e722929839babfff62e9d56c68e1112
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65532
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When compressed ME RW blobs are used for CSE FW update, it has to be
loaded into memory to decompress. So perform CSE FW update in ramstage.
Alder Lake-N based nissa boards use compressed ME RW blobs to save on
SPI flash size. Enable CSE FW update in ramstage.
BRANCH=firmware-brya-14505.B
TEST=Perform CSE FW update on nivviks and verify upgrade/downgrade
works.
Change-Id: Ide9471146d186dca11fb020e5006eeaa01442669
Signed-off-by: Krishna P Bhat D <krishna.p.bhat.d@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
There is no longer any information printed when updating submodules, so
on the initial build, this can lead to a long delay without explaining
what's going on.
Just add an information line that the submodules are being updated so
that the user can see what's happening.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I987e50b99e39b976bc8367525549153e1eba69cd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65322
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
This patch enables X2APIC to avoid hang-ups due to
`Switching from X2APIC to XAPIC mode is not implemented.`
BUG=b:237924211 ([MTL-FSP][v2222.1] Lists of boot issue with MTL FSP)
TEST=Able to enable X2APIC on rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I58649a9a6c9c0ba86856f6aa5fb470e2ef774e90
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65617
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Define the CCD (aka "Webcam") USB port in the devicetree as
it is used in multiple places. It is used in devtree to
disable it based on the CMOS setting "webcam", and in the
devicetree to configure the port tuning.
This also corrects the port that is disabled on CML, from
usb2_port[6] to usb2_port[3].
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I16e368fc7965f978f2302633122ba63038603c1e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64704
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Group the USB ports by hardware ports, rather than separate USB 2.0 and
3.0 interfaces.
This also removes usb3_port[2] as it is not connected and fixes the labelling of usb3_port[0] and usb3_port[1].
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I7923fc00c36687a7f89d863eb0ea4e01a036502d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64703
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
This patch sets the Power Limits and Voltage Regulator settings for
three RaptorLake SKUs (45W, 28W and 15W) following the guidance from
document 686872 (June 7th edition).
BUG=b:237809660
TEST=Power Limit and VR serial logs review + debug instrumentation
SKUs successfully booted
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: I7e9d4039615e6c33b869c6243efbfeb2259ac219
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65582
Reviewed-by: Zhixing Ma <zhixing.ma@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Cliff Huang <cliff.huang@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Update 3rdparty/fsp submodule to include AlderLake FSP.
Hook up the Kconfig settings to point to Fsp.fd and headers for
ADL-S and ADL-P platforms which the FSP has been published for.
The FSP binaries are compliant with the specification revision 2.3
so update these settings accordingly.
Although FSP header is v2.3 compliant, the features set of the FSP
v2.3 is not being met.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I577931da7952b681534bb78b7b2c7683cd99febd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65519
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There is a requirement that the TPM RST signal cannot be asserted by
software. On nissa this is PLT_RST_L, so lock this pin to prevent it
being reconfigured as a GPIO.
BUG=b:216671701
TEST=Try to change GPP_B13 from the kernel:
$ echo 677 > /sys/class/gpio/export
$ echo out > /sys/class/gpio/gpio677/direction
$ echo 0 > /sys/class/gpio/gpio677/value
$ echo 1 > /sys/class/gpio/gpio677/value
GSC console doesn't show "PLT_RST_L ASSERTED" / "PLT_RST_L DEASSERTED"
Change-Id: Id5d64b4b028e4f63c4acb05cd8632d0642866688
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65591
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Create PSP NVRAM and RPMC NVRAM region with size 128K & 64K
respectively, which are supported region by the PSP.
moved CBFS up due to build error, CBFS need not to be at the end the flash for amd Zen cpu.
Change-Id: Ide778c61a755697c1bef1eaa87f2976d8ff12eb6
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This change adds new Rembrandt SoC support by defining it as base SoC
of sabrina as sabrina is derived from Rembrandt SoC.
All the needed changes for Rembrandt SoC will be applied under
SOC_AMD_REMBRANDT config.
Change-Id: I1c9392918cc2c6b511d467f99aceefc725750ce6
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add new folder and basic drivers for Mediatek SoC 'MT8188'.
Difference of modules including in this patch between MT8188 and
existing SoCs:
Timer:
Similar to MT8195 and MT8186, MT8188 uses v2 timer.
EMI/PLL/SPI:
Different from existing SoCs.
The implementation is based on these files:
MT8188G_Application Processor Technical Brief_v0.4.pdf
MT8188G_Functional Specification v0.4.pdf
MT8188 Application Processor Registers-1.pdf
MT8188 Application Processor Registers-2.pdf
TEST=saw the coreboot uart log to bootblock
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I3320f3d49a9b9ed781ceb812e4341e379db4ac20
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65585
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
This patch assigns FSP handler event for FSP-M and FSP-S with coreboot
romstage and ramstage debug handler when FSP_USES_CB_DEBUG_EVENT_HANDLER
Kconfig is enabled.
BUG=b:237263080
TEST=Able to build and boot MTL simics. Also, verified the FSP debug
log is using coreboot debug library as below:
Before:
Register PPI Notify: DCD0BE23-9586-40F4-B643-06522CED4EDE
Install PPI: 8C8CE578-8A3D-4F1C-9935-896185C32DD3
Install PPI: 5473C07A-3DCB-4DCA-BD6F-1E9689E7349A
The 0th FV start address is 0x000F961B000, size is 0x00150000, handle
is 0xF961B000
Register PPI Notify: 49EDB1C1-BF21-4761-BB12-EB0031AABB39
Register PPI Notify: EA7CA24B-DED5-4DAD-A389-BF827E8F9B38
Install PPI: B9E0ABFE-5979-4914-977F-6DEE78C278A6
With this code change:
[SPEW ] Register PPI Notify: DCD0BE23-9586-40F4-B643-06522CED4EDE
[SPEW ] Install PPI: 8C8CE578-8A3D-4F1C-9935-896185C32DD3
[SPEW ] Install PPI: 5473C07A-3DCB-4DCA-BD6F-1E9689E7349A
[SPEW ] The 0th FV start address is 0x000F95C0000, size is 0x00160000, handle is 0xF95C0000
[SPEW ] Register PPI Notify: 49EDB1C1-BF21-4761-BB12-EB0031AABB39
[SPEW ] Register PPI Notify: EA7CA24B-DED5-4DAD-A389-BF827E8F9B38
[SPEW ] Install PPI: B9E0ABFE-5979-4914-977F-6DEE78C278A6
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I80ba73afed642e6d21c5310e9bf734f6f7170347
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65456
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
