Clang complains that the two enumerations are incompatible. However, the
values themselves are the same (0: mobile, 1: desktop, 5: ULT). So, cast
the function's return value to silence the warning.
Change-Id: If7b5e22e893e9f3f17a15197c65448fb782590f6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81862
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Program the AER capability header register in a single write because
it's write-once. In addition, only PCH-LP supports L1 sub-states, so
only report the L1 sub-state capability on PCH-LP. This follows what
Lynx Point PCH reference code version 1.9.1 does.
Change-Id: I08bd107eec7a3b2f1701c4657ae104e0818ae035
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57503
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Lynx Point PCH reference code version 1.9.1 masks the upper 4 bits of
the PCIe root port register at offset 0xf5.
Change-Id: I9529ad88d34a5cb4a09843e3165f3a70c5ea22e8
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57502
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Lynx Point PCH reference code version 1.9.1 programs the larger L1 exit
latency when ASPM is enabled. Document 535127 (BDW PCH-LP BS) also does
the same. Correct the condition accordingly. On Lynx Point, also remove
a now-redundant write to the LCAP register (offset 0x4c).
Change-Id: I2166bd5b5504ed97adcd2db0a802da02da4c91f3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57501
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Anything below 128K will cause SMMSTORE driver in edk2 to fail, since
a minimum of (2) 64K blocks are needed. Increase the size to 256K to
match other boards in the tree.
TEST=build/boot zork (morphius) with SMMSTORE enabled.
Change-Id: Ifd3be9b0757e270d2f106e2fbebf3991e49dec65
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81869
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Anything below 128K will cause SMMSTORE driver in edk2 to fail, since
a minimum of (2) 64K blocks are needed. Increase the size to 256K to
match other boards in the tree.
TEST=build/boot skyrim (frostflow) with SMMSTORE enabled.
Change-Id: I34f9d27c27ab7148dfc530322f741a576c348de7
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81868
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Anything below 128K will cause SMMSTORE driver in edk2 to fail, since
a minimum of (2) 64K blocks are needed. Increase the size to 256K to
match other boards in the tree.
Change-Id: Ic45324b8c5bbd205e889e934c9d5dd17f7775152
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81867
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Anything below 128K will cause SMMSTORE driver in edk2 to fail, since
a minimum of (2) 64K blocks are needed. Increase the size to 256K to
match other boards in the tree.
TEST=build/boot guybrush (dewatt) with SMMSTORE enabled.
Change-Id: Ic4fdacd493d83fa3c1683a06d1276b0190f6db8b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81866
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Anything below 128K will cause SMMSTORE driver in edk2 to fail, since
a minimum of (2) 64K blocks are needed. Increase the size to 256K to
match other boards in the tree.
Change-Id: I04d57ff7f74d79118652cfe227cf223375df6472
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81865
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The karma variant, being a Chromebase, has an internal eDP output for
the built-in display whereas the fizz/endeavour variants do not. Use
separate gma-mainboard.ads files so that karma's internal panel works
properly with libgfxinit.
TEST=build google/fizz (fizz/karma) with libgfxinit enabled, ensure
correct gma-mainboard.ads file is included in the build.
Change-Id: Ia6aca538ba8c13b48aa80901222071d704b5f0c0
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Found by inteltool on HP Pro 3500 Series running vendor firmware version
8.14 Rev.A.
Change-Id: I156787e533c2605e7440548a2d3bf711bb1af5d7
Signed-off-by: Joel Linn <jl@conductive.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81427
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This prevents name clashes with drivers/spi/tpm and allows both to be
potentially compiled in at the same time.
Change-Id: I0aa2686103546e0696ab8dcf77e2b99bf9734915
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81860
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Create the greenbayupoc variant of the brox reference board by copying
the template files to a new directory named for the variant.
BUG=b:329530883
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brox -x -a
make sure the build includes GOOGLE_GREENBAYUPOC.
Change-Id: I90936d97b41e59c49dd92997146caf580bce1f4f
Signed-off-by: Eren Peng <peng.eren@inventec.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Some internal keyboards have a dictation key; this commit simply adds
support for this key by adding the mapping from the scancode to the
Linux keycode for use in the linux,physmap ACPI table.
BUG=b:333101631
TEST=Flash DUT that emits a scancode for a dictation key, verify that it
is mapped to KEY_DICTATE in the Linux kernel.
Change-Id: Iabc56662a9d6b29e84ab81ed93cb46d2e8372de9
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81863
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Mark eMMC as non-removable to allow Windows 10/11 to install now that
edk2 can boot from it.
Change-Id: If0e14106521f99cb97d1bf421f4d82d1234c2f15
Signed-off-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81858
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
These files were added after the switch.
Change-Id: I1986e4f921e0e56fe5255433d4b9216dc7c4dc59
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81856
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use the official microcode updates from intel-microcode submodule
by default. Downstream users can still decide to use their own files.
Change-Id: I58121cc2ca7699d3d26581d7d5875ec74deeeb93
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81637
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
This pragma says to IWYU (Include What You Use) that the current file
is supposed to provide commented header.
Change-Id: I3acb5e6b18443e454d8174b0b1f9d207c0fb78b5
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Lynxpoint has them, so add them on Broadwell as well.
Change-Id: Iaa3e8044090262a64e58062ec4b116976978ce55
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Lynx Point PCH reference code version 1.9.1 checks bit 29 to detect ASPM
on PCH-LP root port #6, not bit 28. Document 535127 (BDW PCH-LP BS) also
uses bit 29 for root port #6. Correct the bit used in the check, as well
as the surrounding comments.
Change-Id: Ie4bd7cbbfc151762f29eab1326567f987b25ab19
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57500
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For current generation SPR/EMR you need to add at least
3 different microcodes having about 2MiB of size in total.
This doesn't work with the hardcoded offset and size in Kconfig.
Since it's loaded through FIT there's no need to pass it to FSP-T.
Drop the hardcoded locations and place it somewhere in CBFS.
Test: Booted on ibm/sbp1 with microcode confirmed loaded in
bootblock on BSP. All the APs also have the correct
microcode version loaded.
TEST= Build and boot on intel/archercity CRB
'cat /proc/cpuinfo | grep microcode' result doesn't change
before and after this patch.
Change-Id: Iaa7007c2b11a860c9c664a7e753440bad7fe858e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81635
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Compress FSP-S to save some space in CBFS.
Reduces the size of debug FSP-S by about 25%.
Test: Still boots on ibm/sbp1.
TEST= Build and boot on intel/archercity CRB.
Change-Id: I6248e7cabbce45f6c2fedfab34f328309f87e868
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81634
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Recent changes to the ITE 8772F SIO code caused the initial fan PWM
to change from 0 to 50%; set it to 30% to reduce fan noise while
still providing some temp control before the OS/ACPI takes over.
TEST=build/boot stumpy to payload, verify fan noise is negligible.
Change-Id: I287e46202ee1c112d1da63c0d8b7889958e3807e
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81514
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Recent changes to the ITE 8772F SIO code caused the initial fan PWM
to change from 0 to 50%; set it to 30% to reduce fan noise while
still providing some temp control before the OS/ACPI takes over.
TEST=build/boot google/beltino to payload, verify fan noise is
negligible.
Change-Id: I0177235d73e051f02b5333cf1d735556382b919f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81513
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
A function to disable the PME# output was added. This is required to
set up the SuperIO on the "HP Pro 3500 Series" mb.
Change-Id: I94f023ba6eb24b5fb1c5e0b30eb65738f50a87eb
Signed-off-by: Joel Linn <jl@conductive.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81589
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
The 3VSBSW# signal can now also be disabled again which is necessary to
power components down properly in SMM when entering S5. In such cases
the signal will be enabled only in the SMM S3 handler.
Change-Id: I8535176908ec39e9916774135e028cbc7c203474
Signed-off-by: Joel Linn <jl@conductive.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81588
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
A number of ITE SIOs support "special fan control vectors", which
effectively allow non-linear fan speed control. This is for example used
by the vendor firmware of the "HP Pro 3500 Series".
The special vector registers won't be written to until the mb's
devicetree configures `FAN_VECX.tmp_start != 0`.
Change-Id: I93df2b5652fc3fde775b6161fa5bebc4a34d5e94
Signed-off-by: Joel Linn <jl@conductive.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81426
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
The it8772f is now configured by the much better common code that is
used for other chips in the family as well. This mainly concerns the EC,
the GPIO functionality was not moved to common as it currently lacks a
sane abstraction in any codebase.
The datasheets of the it8772e(f) and it8728f (for reference) were
studied and verified against the common code, adding exceptions where
needed.
Change-Id: Ic4d9d5460628e444dc20f620179b39c90dbc28c6
Signed-off-by: Joel Linn <jl@conductive.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81310
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Haswell ThinkPads have Nvidia Optimus wired in on some models.
With recent coreboot changes, legacy VGA decode is now disabled
on the iGPU, and the iGPU itself is disabled, when a dGPU is
present. This is a problem on Optimus laptops, because it means
that the Intel GPU would be effectively disabled, when it is the
one that has to handle the framebuffer.
On these boards, you can enable ONBOARD_VGA_IS_PRIMARY so that
coreboot does not disable the iGPU. This is because on Optimus
laptops, the Nvidia GPU is only used for offloaded rendering.
Enable ONBOARD_VGA_IS_PRIMARY by default on these boards.
Change-Id: I8f1e0ca2861d1cc9a9ad41e7c9257aeca1a62a31
Signed-off-by: Leah Rowe <info@minifree.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81645
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Integer division in C truncates toward zero. When the dividend and the
divisor are positive, one can add half of the divisor to the dividend to
round the division result towards the closest integer. We already have a
macro in commonlib to do just that, so put it to good use.
Tested with BUILD_TIMELESS=1, coreboot images for the Asus P8Z77-V LX2
and the Asrock B85M Pro4 do not change.
Change-Id: I251af82da15049a3a2aa6ea712ae8c9fe859caf6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52651
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
tCPDED is always 1, except for steppings earlier than Sandy Bridge D0.
Reduces the differences to MRC.bin.
Tested on Lenovo X220: Still boots and runs fine.
Change-Id: I5294173c02f06c601fdb13ed785ee33d7a4e3eca
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79762
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Only write register WMM_READ_CONFIG on Ivy Bridge as it's
reserved on Sandy Bridge.
Tested on Lenovo X220: Still boots and runs fine.
Change-Id: Ie14ea06d744b1a8368d32803c6c1ccfb1262532e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79761
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
MRC.bin doesn't write BANDTIMERS_SNB register, so drop the
write. The bits written were targeting a reserved range,
so assume it didn't do anything useful.
Tested on Lenovo X220: Still boots and runs fine.
Change-Id: I920aabd60831c791188af976914553787cc0ff18
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79760
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
The GPIO for NOTE_BOOK_MODE has changed from GPP_B17 to GPP_E9. Also
initializing it (if ISH is enabled) to be NF2 (ISH_GP4). Also took
the liberty of alphabetizing all the ISH GPIOs to they're easier to
search through.
BUG=b:316421831
BRANCH=None
TEST=emerge-brox coreboot chromeos-bootimage
Make sure that brox device still boots up with this change.
Change-Id: I4a091b58deb855c7a7f1489a9506db2f821503b7
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81789
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Previously incorrect sets of SATA ports were enabled.
There are no publically available schematics, but I am almost certain
the new values are correct.
The original 0x33 value was carlessly copy pasted, and only enables
ports 0, 1, 4, 5, leaving 2, 3 disabled.
On the SFF, with 0x33 only the first 2 ports worked. I have verified
by plugging in devices under the stock firmware that 0, 1, 2 are the
ones that should be enabled, so setting the value to 0x7 per datasheet.
This was also tested in practice to work.
I don't have an MT, but I was told the two white ports didn't work
with 0x33, so those are most certainly ports 3, 4, hence me setting
the value to 0xf. If the MT's working ports are port 0, 1 on the PCH
this is correct.
Signed-off-by: Mate Kukri <kukri.mate@gmail.com>
Change-Id: I32cb236b8f8140fba4a04c23161363d21741dcbc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81550
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
<string.h> is supposed to provide <stdarg.h> and <stdio.h>
Change-Id: I021ba535ba5ec683021c4dfc41ac18d9cebbcfd2
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81853
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
<device/pci.h> is supposed to provide <device/pci_{def,type}.h>
Change-Id: Ia645b8dba8c688187a25916f508593f333821f88
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81831
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
<device/device.h> is supposed to provide <device/{path,resource}.h>
Change-Id: I2ef82c8fe30b1c1399a9f85c1734ce8ba16a1f88
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Starting with version 18 LLVM puts code and data generated with
-ffunction-section -mcmodel=large inside sections with an 'l' prefix.
This would now also pick up const data in .rodata.
Change-Id: Ie07779ef548337772183ffe2d642f971d8cceae7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81777
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Fill GPIO table for Sundance.
BUG=b:327520553
TEST=emerge-nissa coreboot
Change-Id: I53ed5874347006985ca5231d1531fa519088f796
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81613
Tested-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
