Unlike other Panther Point boards, the ga-b75m-d3h lacks definitions
to wire SuperSpeed-capable ports to XHCI in its devicetree, causing
these ports being wired to the second EHCI, and only working as USB
2.0 ports. The missing register definitions are added to fix that.
Tested on my ga-b75-d3v board.
Change-Id: Ida4de26f1a493ead83065b1ab27c0c684a074513
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37912
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Running the x86_64 qemu mainboard target with '-accel kvm' results in hang,
as the 'D' and 'A' bits needs to be set in read only page tables.
Tested on QEMU Q35: Boots into payload with '-accel kvm'.
Change-Id: I4beae8deec6bf34f9762e7b54c5da4e5b63f6d24
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36778
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Switching was done by moving a SIO configuration and
the clocks setup from 'romstage.c' to 'bootblock.c',
following the example of change CB:37719 (fc749b2).
TEST=Boots into Artix Linux 2019 without a problem.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: I780fa87cb9cb3c45844c388331ef89eb8eb70ebb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
If the board doesn't provide VRconfig in devicetree make sure to use
the lookup table for IccMax instead of defaults for some mobile SoC.
Also use decimal values instead of hex.
Change-Id: If31063f9b483a3bbd6cc90df1c1b76b4efc66445
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37598
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The baseboard GPIO table definitions are too straineous to the extend
that variants need to redefine assumptions back to NC. Invert this so
that baseboard by default assumes the safer NC and move the specific
board configurations to their respective places.
This patch handles the GPP_H3 gpio config for easier review. This
toggles the MAX amp which not all boards have. Move the pin
configuration to boards with the respective devicetree configuration
following on from the theme of commit b417786525.
BUG=b:142094759
BRANCH=none
TEST=builds
Change-Id: Iefd2223af79a13c8a42d07bc10b2772dbff6d3e5
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37922
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The baseboard GPIO table definitions are too straineous to the extend
that variants need to redefine assumptions back to NC. Invert this so
that baseboard by default assumes the safer NC and move the specific
board configurations to their respective places.
This patch handles the GPP_C15 group for easier review.
BUG=b:142094759
BRANCH=none
TEST=builds
Change-Id: I578245e24895d361d80ad016a4f18204e2b6e1ca
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The baseboard GPIO table definitions are too straineous to the extend
that variants need to redefine assumptions back to NC. Invert this so
that baseboard by default assumes the safer NC and move the specific
board configurations to their respective places.
This patch handles the GPP_A* group for easier review.
BUG=b:142094759
BRANCH=none
TEST=builds
Change-Id: I29b4323ac80b1288b2562846217c4f377714fc2c
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37920
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Generally work towards a more loose baseboard definition by moving out
some original assumptions to be board specifics. Specifically Puff does
not have the MAX98357A speaker amp and enabling the driver winds up
generating incorrect SSDT tables that confuse the kernel. Since
devicetree inherits the chip from device node in base and an override
will also inherit the chip and thus dispatch the unwanted fill_ssdt fn
call.
V.2: lean on linker to drop max98357a driver when not in dt.
BRANCH=none
BUG=b:146519004
TEST=./util/abuild/abuild -p none -t google/hatch -x -a
Change-Id: I8e7fed69a4c6d9610ac100da6bae147828ebfa81
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37909
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Two things here:
i. ) FSP requires that function 0 be enabled whenever any non-zero
functions hang under the same bus:device.
ii.) FSP reorders function 6 RP to be function 0 if function 0 is
indeed unused.
BUG=b:146437819
BRANCH=none
TEST=none
Change-Id: I0f499a23495e18cfcc712c7c96024433a6181a4c
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37913
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
* Make use of introduced SSDT config mode access
* Make use of introduced SSDT mutex
* Provide ACPI functions to safely access SIO config space
* Implement method to query LDN enable state
* Implement method to set LDN enable state
* Use introduced functions to implement _DIS and _STA in the device
* Update documentation
Tested on Aspeed AST2500 and Linux 5.2.
Manually verified ACPI code that generates no errors in Linux.
Change-Id: I520b29de925f368cd71ff8f1f58d2d57d72eff8d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37640
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
As discussed in CB:35077, since both measured boot and verified boot
depends on vboot library, it had better to introduce a dedicated flag
CONFIG_VBOOT_LIB to control the building and linking of the vboot
library, and make other flags needing vboot library select it. Only
the actual verification stuff should be conditional on CONFIG_VBOOT.
Change-Id: Ia1907a11c851ee45a70582e02bdbe08fb18cc6a4
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37787
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Joel Kitching <kitching@google.com>
Tigerlake and Jasperlake fsp requires stack size to be minimum 192 KiB
and heap size to be minimum 128 KiB.
Updating both Kconfig to meet size requirements.
Also updated required CAR region size during boot block due to increment
in stack & heap requirement by fsp
Change-Id: I38e93b5986811ff3e0a8df5f4f36af35f308cb6b
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37764
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The delay cell result should use DDR clock PLL rate for computation,
and should not be divided by 2.
This helps to improve DRAM stability.
BUG=b:80501386,b:142358843
BRANCH=kukui
TEST=Boots correctly on Kukui
Change-Id: Idf5cce206e248bb327f9a7d27c4f364ef1c68aa1
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
PCI devices starting from 18 are processor configuration devices for each
node and are not a bus itself.
According to ACPI specification 6.3 section 6.1.5:
"... _HID object must be used to describe any device that will be
enumerated by OSPM. OSPM only enumerates a device when no bus enumerator
can detect the device ID. ... Use the _ADR object to describe devices
enumerated by bus enumerators other than OSPM."
PCI device 18 with its functions has a standard enumerator, which is PCI
enumerator so it needs a _ADR. Create a separate ACPI device for the
processor configuration space. This fixes the ACPI compliance problem
from CB:36318.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ie7b45ce8d9e4fdd80d90752bf51bba4d30041507
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37835
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The MIC1 NID is configured incorrectly because of a typo. The value is 7
digits instead of 8. This is corrected by this patch.
No issues are known because of this (the MIC is not connected).
BUG=N/A
TEST=build
Change-Id: Ia12f3be7d7262829cce3400a8535a33ea1c54b78
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37836
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
FSP logo handling used PcdLogoPtr and PcdLogoSize which are elements of
the chipset specific FSP structures.
Create soc_load_logo() which will pass the logo pointer and size.
This function will call fsp_load_logo which will load the logo.
BUG=NA
TEST= Build and verified logo is displayed on Facebook FBG1701
Change-Id: I86943e64ca1ddd05e7e88fc6b882cfd33b98272e
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37791
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Missing bus init for RTL8111H ethernet chip hanging on bus.
V.2: Include admendments from Kangheui.
BRANCH=none
BUG=b:146437819
TEST=./util/abuild/abuild -p none -t google/hatch -x -a
Change-Id: I22aba312f183ea05eeb81d326ca0c05ce340a2e8
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Seems nothing special is needed here from coreboot.
V.2: Fix typo as well in speed map.
BRANCH=none
BUG=b:143047058
TEST=./util/abuild/abuild -p none -t google/hatch -x -a
Change-Id: Ief750f98677b2017af78fb0b5bc98e1492dedbe4
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37736
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
