Only input from the BJ port is wired to VSYS on Kalista. VBUS from
USB-C is for output only. In other words, Kalista is a source only
device from a USB/PD perspective.
This patch disables EC-EFS, which would be needed for the EC to jump
to RW to get PD power before the AP boots. Kalista will be always
supplied enough power to boot the AP through the BJ port.
CQ-DEPEND=CL:1330171
BUG=b:118386511
BRANCH=none
TEST=Boot Fizz. Verify normal boot, soft sync, recovery mode work.
Change-Id: Icd18662ae1e76f35eb9bcd521b1951aacc713252
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/29564
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Refactor PMIC wrapper code which will be reused among similar SoCs.
Move reusable code into the common folder.
BUG=b:80501386
BRANCH=none
TEST=emerge-elm coreboot
Change-Id: I25acb6da49e72748d856804ef4f97e9ec3bef72d
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/29420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Braswell allready supported vmx, but offered no mechanism to unset it, nor
to set the lock bit required for Windows to recognize virtualization.
Enable this functionality by adding CPU_INTEL_COMMON config.
Test: build/boot Windows 10 on Braswell ChromeOS device, verify Windows shows
virtualization as enabled.
Change-Id: I0d39abaeb9eebcceb37dc791df6b06e521fe1992
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/29570
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
GPP_D0 is NC in 1st SKU board design, so we should control GPP_D0
for only 2nd SKU.
BUG=none
BRANCH=poppy
TEST=emerge-nautilus coreboot
Change-Id: Ifd85693c9155ed960f0c794d4b83fe8863b77134
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Reviewed-on: https://review.coreboot.org/29631
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The GPP_E1 gpio was incorrectly being defined as a no-connect.
Configure GPP_E1 for the WLAN_WAKE_L signal as per the schematic.
BUG=b:119508897
TEST=Build and flash nocturne, boot nocturne and
1) Verify nocturne can successfully suspend/resume from S3 and S0ix.
2) Verify wake from wlan wakes device from S3 and S0ix.
To do so,
a) as root, execute "iw phy phy0 wowlan enable disconnect" on DUT
b) connect DUT to mobile hotspot
c) sleep device via "powerd_dbus_suspend"
d) turn off hotspot, verify DUT wakes from S0ix
e) enable hotspot again
f) connect DUT to hotspot
g) sleep DUT via "sudo echo mem > /sys/power/state"
h) turn off hotspot, verify DUT wakes from S3
Change-Id: I4efb4f6d601e172ae4807901e3bd4c9954319f80
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/29630
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The common SPI controller driver in src/southbridge/intel/common does
match the SPI controller included in the PCH of Broadwell-DE SoC. Switch
to the usage of this driver and delete the dedicated one for the FSP
based Broadwell-DE implementation.
TEST: Boot mc_bdx1 with SPI driver active in romstage
Change-Id: I4fe8057ea1981e350659a5caa9912fb758110115
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/29633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
There are several files under soc/amd that use units defined by file
porting.h. These units use upper case, and are not recognized by checkpatch,
thus causing problems when defining a pointer (request to use space before
and after the star symbol). These are the definitions from porting.h showing
the units that this patch will change and their coreboot definitions (not all
are actually used):
typedef uintptr_t UINTN;
typedef int64_t INT64;
typedef uint64_t UINT64;
typedef int32_t INT32;
typedef uint32_t UINT32;
typedef int16_t INT16;
typedef uint16_t UINT16;
typedef int8_t INT8;
typedef uint8_t UINT8;
typedef char CHAR8;
typedef unsigned short CHAR16;
typedef unsigned char BOOLEAN;
typedef void VOID;
BUG=b:118775313
TEST=Build and boot grunt.
Change-Id: Ic1bd64d6224a030a65d23decabf0e602cee02871
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/29520
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Function write_pci_cfg_irqs() has "no function" variables. One variable is
set and never used, the other is only used to control a print. Remove them.
BUG=b:117950052
TEST=Build grunt.
Change-Id: Icd98db3e794e609b112f15979a3a00a2977a0fdb
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/29244
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Currently mode-aware DPTF depends on Tablet Mode Switch to load the
right table. This does not scale well with device types and configuration.
This change helps to decouple the mode-aware DPTF from Tablet Mode Switch.
This change allows ACPI to load the appropriate DPTF table based on the
profile number as detected by EC.
BUG=b:118149364
BRANCH=None
TEST=Ensured that the expected DPTF table are loaded in different
modes(base attached/detached and clamshell/360-flipped) on Soraka and
Nautilus.
Change-Id: Ibffe9c58f970aec37aa74a040170c4cf559bab33
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/29249
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In order to support Multi-DPTF profile, Device DPTF Profile Number is
introduced into EC_ACPI_MEM_DEVICE_ORIENTATION ACPI Space at offset
0x09. This bit field stays along with Tablet Mode Device flag.
BUG=b:118149364
BRANCH=None
TEST=Ensured that the expected DPTF table are loaded in different
modes(base attached/detached and clamshell/360-flipped) on Soraka and
Nautilus.
Change-Id: Ie14916ac16c50cbe0990021e2eb03d5121cd0e07
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/29248
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Rename EC_ENABLE_TABLET_EVENT config as EC_ENABLE_MULTIPLE_DPTF_PROFILES
since it aligns with the use-case.
BUG=b:118149364
BRANCH=None
TEST=Ensured that the expected DPTF table are loaded in different
modes (base attached/detached and clamshell/360-flipped) on Soraka and
Nautilus.
Change-Id: If147f1c79ceaaed00e17ec80ec6c912a8f7a8c2e
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/29261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
This patch makes static PIRQ->IRQ mapping, where IRQ10 is mapped
to PBRC and IRQ11 is mapped for PARC/PCRC/PDRC/PERC/PFRC/PGRC/PHRC.
Change-Id: I8722e34841fe53a4d425202b915ac7838af0d859
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/29629
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since PIRQ->IRQ mapping registers PxRC are not available after FSP-S call
due to PCH requirement change from CNP PCH onwards, hence making static IRQ
mapping for pci_irqs.asl and pcie.asl
Also remove unused irqlinks.asl from soc/intel/cannonlake/acpi/
Change-Id: I35e2ed150a1db195fc9ce13897e65b23fc8b7ca1
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/29628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Current implementation works by luck as DCACHE area is actually RAM and
stack can grow and use that RAM outside of the area.
* Set DCACHE_BSP_STACK_SIZE to 0x4000.
* Add an assert to make sure it is set to a sane value on all platforms.
Change-Id: I71f9d74d89e4129cdc4a850acc4fc1ac90e5f628
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/29611
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a helper function specific to ramstage to add the boot count
information into event log at ramstage.
BUG=b:117884485
BRANCH=None
TEST=Add an event log from romstage, boot to ChromeOS
Change-Id: Ic79f1a702548d8a2cd5c13175a9b2d718527953f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/29542
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Group event log state information together to manage them better during
different stages of coreboot.
BUG=b:117884485
BRANCH=None
TEST=Add an event log from romstage, boot to ChromeOS
Change-Id: I62792c0f5063c89ad11b512f1777c7ab8a2c13e5
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/29541
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Remove the SmbusEnable config option from devicetree and instead
use the state of the PCI device to determine if it should be
enabled or disabled.
Change-Id: Id362009e4c8e91699d1ca9bb3c2614e21cfc462a
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Remove the SmbusEnable parameter from all Cannon Lake mainboards.
Instead this will be determined by the enable state of the SMBUS
PCI device.
Change-Id: I7ece6768da4c517747af12a07012583575816ae1
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29551
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Some embedded controllers expect to be sent a command when the OS
calls the ACPI \_PTS and \_WAK methods. For example see the code
in ec/google/wilco/acpi/platform.asl that tells the EC when the
methods have been executed by the OS.
Not all ECs may define these methods so this change requires also
setting a Kconfig option to enable it.
Change-Id: I6bf83509423c0fb07c4890986a189cf54afaed10
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29487
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Useful for testing stuff in C_ENVIRONMENT_BOOTBLOCK, like
VBOOT with separate verstage.
Changes:
* Use symbols to set up CAR and STACK
* Zero CAR area
* Move BIST failure checking to cpu folder
* Rename functions where necessary
Tested:
* qemu-2.11.2 machine pc
* qemu-2.11.2 machine q35
Test result:
* BIST error reporting is still working.
* Console starts in bootblock
* SeaBios 1.11.2 as payload is still working
Change-Id: Ibf341002c36d868b9b44c8b37381fa78ae5c4381
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/29578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
On some boards the devicetree and Function Disable register did not
match. In this case the FD values are put in the devicetree as these
were the values that were actually used in practice.
A complete devicetree will make it easier to automatically disable
devices in ramstage.
Change-Id: I1692ca5f490ea84e2fc520d3f66044ad7514f76e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27122
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
