e2271430c5
Add a gettimeofday() implementation - it works pretty well, but it drifts a little bit so its not very suitable for keeping time. It works best to track changes in time over small periods of time. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3272 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
136 lines
4.3 KiB
C
136 lines
4.3 KiB
C
/*
|
|
* This file is part of the libpayload project.
|
|
*
|
|
* Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Datasheet:
|
|
* - Name: MC146818: Real-time Clock Plus RAM (RTC)
|
|
* - PDF: http://www.freescale.com/files/microcontrollers/doc/data_sheet/MC146818.pdf
|
|
* - Order number: MC146818/D
|
|
*/
|
|
|
|
/*
|
|
* See also:
|
|
* http://bochs.sourceforge.net/techspec/CMOS-reference.txt
|
|
* http://www.bioscentral.com/misc/cmosmap.htm
|
|
*/
|
|
|
|
#include <libpayload.h>
|
|
|
|
|
|
/**
|
|
* PCs can have either 64 (very old ones), 128, or 256 bytes of CMOS RAM.
|
|
*
|
|
* Usually you access the lower 128 CMOS bytes via I/O port 0x70/0x71.
|
|
* For more recent chipsets with 256 bytes, you have to access the upper
|
|
* 128 bytes (128-255) using two different registers, usually 0x72/0x73.
|
|
*
|
|
* On some chipsets this can be different, though. The VIA VT8237R for example
|
|
* only recognizes the ports 0x74/0x75 for accessing the high 128 CMOS bytes
|
|
* (as seems to be the case for multiple VIA chipsets).
|
|
*
|
|
* It's very chipset-specific if and how the upper 128 bytes are enabled at
|
|
* all, but this work should be done in coreboot anyway. Libpayload assumes
|
|
* that coreboot has properly enabled access to the upper 128 bytes and
|
|
* doesn't try to do this on its own.
|
|
*/
|
|
#define RTC_PORT_STANDARD 0x70
|
|
#ifdef CONFIG_RTC_PORT_EXTENDED_VIA
|
|
#define RTC_PORT_EXTENDED 0x74
|
|
#else
|
|
#define RTC_PORT_EXTENDED 0x72
|
|
#endif
|
|
|
|
/**
|
|
* Read a byte from the specified NVRAM address.
|
|
*
|
|
* @param addr The NVRAM address to read a byte from.
|
|
* @return The byte at the given NVRAM address.
|
|
*/
|
|
u8 nvram_read(u8 addr)
|
|
{
|
|
u16 rtc_port = addr < 128 ? RTC_PORT_STANDARD : RTC_PORT_EXTENDED;
|
|
|
|
outb(addr, rtc_port);
|
|
return inb(rtc_port + 1);
|
|
}
|
|
|
|
/**
|
|
* Write a byte to the specified NVRAM address.
|
|
*
|
|
* @param val The byte to write to NVRAM.
|
|
* @param addr The NVRAM address to write to.
|
|
*/
|
|
void nvram_write(u8 val, u8 addr)
|
|
{
|
|
u16 rtc_port = addr < 128 ? RTC_PORT_STANDARD : RTC_PORT_EXTENDED;
|
|
|
|
outb(addr, rtc_port);
|
|
outb(val, rtc_port + 1);
|
|
}
|
|
|
|
/**
|
|
* Return 1 if the NVRAM is currently updating and a 0 otherwise
|
|
* @return A 1 if the NVRAM is updating and 0 otherwise
|
|
*/
|
|
|
|
int nvram_updating(void)
|
|
{
|
|
return (nvram_read(NVRAM_RTC_FREQ_SELECT) & NVRAM_RTC_UIP) ? 1 : 0;
|
|
}
|
|
|
|
/**
|
|
* Get the current time and date from the RTC
|
|
*
|
|
* @param time A pointer to a broken-down time structure
|
|
*/
|
|
void rtc_read_clock(struct tm *time)
|
|
{
|
|
memset(time, 0, sizeof(*time));
|
|
|
|
while(nvram_updating());
|
|
|
|
time->tm_mon = bcd2dec(nvram_read(NVRAM_RTC_MONTH)) - 1;
|
|
time->tm_sec = bcd2dec(nvram_read(NVRAM_RTC_SECONDS));
|
|
time->tm_min = bcd2dec(nvram_read(NVRAM_RTC_MINUTES));
|
|
time->tm_mday = bcd2dec(nvram_read(NVRAM_RTC_DAY));
|
|
time->tm_hour = bcd2dec(nvram_read(NVRAM_RTC_HOURS));
|
|
|
|
/* Instead of finding the century register,
|
|
we just make an assumption that if the year value is
|
|
less then 80, then it is 2000+
|
|
*/
|
|
|
|
time->tm_year = bcd2dec(nvram_read(NVRAM_RTC_YEAR));
|
|
|
|
if (time->tm_year < 80)
|
|
time->tm_year += 100;
|
|
}
|
|
|
|
|