REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2665
ReportDispatcher() is called by a software module to report a status code.
The interface is generic and can be called frequently throughout the boot
under various conditions. A certain set of conditions can cause the
currently implemented algorithm for resource exhaustion to fail. A sample
scenario:
1. ReportStatusCode() is called at a TPL higher than one of the registered
status code listeners making the call to the listener deferred until
TPL is lowered.
2. Additional calls to ReportStatusCode() occur, so the data buffer
continues to expand.
3. A call to ReportStatusCode() is made from within a memory allocation
call (e.g. CoreAllocatePoolPages ()) which is protected from re-
entrancy with mPoolMemoryLock. This will cause the ReallocatePool()
call in ReportDispatcher() to fail. Because the end pointer was already
moved to account for the data size, the end pointer is now moved
beyond the buffer and invalid.
This commit saves the original end pointer value into a local variable
called "FailSafeEndPointer" which tracks a safe end pointer to revert to
in the case the allocated buffer size (CallbackEntry->EndPointer -
CallbackEntry->StatusCodeDataBuffer) is still not large enough for the
data.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Kun Qin <Kun.Qin@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
NonDiscoverablePciDeviceDxe currently #defines the module-internal
PCI_MAX_BARS macro, with value 6 (and type "int").
Remove this private macro definition, and adopt PCI_MAX_BAR from
"MdePkg/Include/IndustryStandard/Pci22.h". Both the value and the type
remain unchanged (the standard PCI_MAX_BAR macro expands to 0x0006).
"NonDiscoverablePciDeviceIo.h" gets the definition of PCI_MAX_BAR via its
existent #include <IndustryStandard/Pci.h> directive.
Build-tested only.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200409113017.18233-1-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2062
This commit makes the behavior for PeiGetVariable() match the following
specification-defined behavior. It is now consistent with the DXE/SMM
variable driver implementation.
The UEFI specification v2.8 Errata A Section 8.2 "GetVariable()"
"Attributes" parameter description states:
"If not NULL, a pointer to the memory location to return the
attributes bitmask for the variable. See 'Related Definitions.'
If not NULL, then Attributes is set on output both when
EFI_SUCCESS and when EFI_BUFFER_TOO_SMALL is returned."
The attributes were previously only returned from the implementation
in Variable.c on EFI_SUCCESS. They are now returned on EFI_SUCCESS or
EFI_BUFFER_TOO_SMALL according to spec.
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Guomin Jiang <guomin.jiang@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2062
The UEFI specification v2.8 Errata A Section 8.2 "GetVariable()"
"Attributes" parameter description states:
"If not NULL, a pointer to the memory location to return the
attributes bitmask for the variable. See 'Related Definitions.'
If not NULL, then Attributes is set on output both when
EFI_SUCCESS and when EFI_BUFFER_TOO_SMALL is returned."
The attributes were previously only returned from the implementation
in Variable.c on EFI_SUCCESS. They are now returned on EFI_SUCCESS or
EFI_BUFFER_TOO_SMALL according to spec.
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Guomin Jiang <guomin.jiang@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
From the function description of GetIfrBinaryData(), FormSetGuid can be
NULL. However, FormSetGuid is passed to IsZeroGuid(). This causes exception
when FormSetGuid is NULL.
Signed-off-by: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
ASSERT in PollMem_Conf, CopyMem_Conf, SetBarAttributes_Conf
Conformance Test.
SCT Test expect return as Invalid Parameter or Unsupported.
Added Checks for Function Parameters.
return Invalid or Unsupported if Check fails.
Added Checks in PciIoPollIo(), PciIoIoRead()
PciIoIoWrite()
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
SdMmcPciHcDxe driver used to read response only after
command and data transfer completed. According to SDHCI
specification response data is ready after the command
complete status is set by the host controller. Getting
the response data early will help debugging the cases
when command completed but data transfer timed out.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
To allow for easier debug of failing commands we
have added a capability to print TRB and command
packet when we start execution of the TRB(on
DEBUG_VERBOSE level) and when the TRB failed to
execute correctly(on DEBUG_ERROR level). Additionally
we will also print error interrupt status and interrupt
status register on failed SD command.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
EDK2's implementation of the LoadImage() boot service permits non-native
binaries to be loaded (i.e., X64 images on IA32 firmware), but any
attempts to start such an image using StartImage() will return
EFI_UNSUPPORTED.
The integration of the PE/COFF emulator protocol into the DXE core
deviates slightly from this paradigm, given that its IsImageSupported
hook as well as its RegisterImage hook are invoked from LoadImage,
and by the time StartImage is called, no opportunity is given to the
provider of the PE/COFF emulator protocol to prevent an image from
being started if it only supports loading it.
To address this disparity, let's move the invocation of RegisterImage()
to the implementation of the StartImage() boot service, allowing the
emulator to permit LoadImage() but reject StartImage() on images that
turn out not to meet the requirements of the emulator as it is being
started.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2564
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Liming Gao <liming.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1989
The commit will avoid unmapping the same resource in error handling logic
for function BuildAdmaDescTable() and SdMmcCreateTrb().
For the error handling in BuildAdmaDescTable():
The error is directly related with the corresponding Map() operation
(mapped address beyond 4G, which is not supported in ADMA), so the Unmap()
operation is done in the error handling logic, and then setting
'Trb->AdmaMap' to NULL to avoid double Unmap.
For the error handling in SdMmcCreateTrb():
The error is not directly related with the corresponding Map() operation,
so the commit will update the code to left SdMmcFreeTrb() for the Unmap
operation to avoid double Unmap.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2001
For S3BootScriptLib APIs:
S3BootScriptSaveIoWrite
S3BootScriptSaveMemWrite
S3BootScriptSavePciCfgWrite
S3BootScriptSavePciCfg2Write
S3BootScriptSaveSmbusExecute
S3BootScriptSaveInformation
S3BootScriptSaveInformationAsciiString
S3BootScriptLabel (happen in S3BootScriptLabelInternal())
possible numeric truncations will happen that may lead to S3 boot script
entry with improper size being returned to store the boot script data.
This commit will add checks to prevent this kind of issue.
Please note that the remaining S3BootScriptLib APIs:
S3BootScriptSaveIoReadWrite
S3BootScriptSaveMemReadWrite
S3BootScriptSavePciCfgReadWrite
S3BootScriptSavePciCfg2ReadWrite
S3BootScriptSaveStall
S3BootScriptSaveDispatch2
S3BootScriptSaveDispatch
S3BootScriptSaveMemPoll
S3BootScriptSaveIoPoll
S3BootScriptSavePciPoll
S3BootScriptSavePci2Poll
S3BootScriptCloseTable
S3BootScriptExecute
S3BootScriptMoveLastOpcode
S3BootScriptCompare
are not affected by such numeric truncation.
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Jian J Wang <jian.j.wang@intel.com>
Current UpdateCapsule service will reject all non-reset capsule images and
return EFI_OUT_OF_RESOURCE if the system is at runtime. This will block a
platform CapsuleLib from implementing ProcessCapsuleImage() with runtime
capsule processing capability.
This patch removes this restriction. The change is controled by a feature
PCD PcdSupportProcessCapsuleAtRuntime, and the default value is FALSE
which means not enable this feature.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2501
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Before writing data to FIFO, wait for the serial port to be ready,
to make sure both the transmit FIFO and shift register empty. Code
comment was saying the right thing but code was missing a check.
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
