PRS1 is 5, but it is in series with PRS3, which is also 5. PRS1 by
itself is only connected to ACP/ACN.
Ref: oryp11 schematics, AC In Charger (Sheet 59)
Ref: serw13 schematics, AC_In, Charger (Sheet 70)
Signed-off-by: Tim Crawford <tcrawford@system76.com>
The PECI-over-eSPI implementation, like the legacy implementation, must
acknowledge when the transaction is done by clearing the bit in the
register.
Fixes a hang during shutdown on oryp11 after unplugging a TBT display.
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Despite the darp9 supporting an RGB backlit keyboard, the keyboard
option was removed and it ships with a white-only LED backlit keyboard
instead. The keypad `/` still has the cycle symbol printed on it, so
replace the color cycling function with the keyboard brightness
function used by other white-only LED keyboards (the 14" TKL ones).
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Replace the get+set logic with a step function to change the backlight
level for `K_KBD_BKL`.
Keyboards using a DAC have a different set of levels due to the
brightness difference between the keyboards.
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Make `white_dac` functions work based on the DAC power level like the
other I2C and PWM mechanisms, instead of preset values from an array.
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Existing FDAT values remain unchanged in their functionality.
New functionality is added to fill unused FDAT values.
FDAT values correspond to the following functionality:
- 0: Set brightness
- 1: Get brightness
- 2: Get backlight type (new)
- 3: Set color
- 4: Get color (new)
- 5: <unused>
- 6: Set brightness (duplicate)
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Use RGBKB-DET# to determine the type of keyboard connected.
If a white keyboard is attached, always set the color to white, and
always return white for the color.
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Limit PL4 based on AC state for all units, not just those with dGPUs.
This will allow setting standard values in coreboot.
Signed-off-by: Tim Crawford <tcrawford@system76.com>
