S0ix does not require eSPI, and eSPI does not mandate S0ix.
Enable S0ix for:
- darp7 (TGL-U)
- darp8 (ADL-P)
- galp5 (TGL-U)
- galp6 (ADL-P)
- lemp10 (TGL-U)
- lemp11 (ADL-U)
It is also currently enabled on ADL-H due to a bug with S3:
- gaze17-3050
- gaze17-3060-b
- oryp9
Signed-off-by: Tim Crawford <tcrawford@system76.com>
The previous commit incorrectly enabled power while off. Model PD_EN
after VA_EC_EN, which it replaced on galp6 for TCP0.
Fixes: a6a6c5fba4 ("galp6: Fix TCP0 power")
Signed-off-by: Tim Crawford <tcrawford@system76.com>
The schematics incorrectly show the pin as `USB_PWR_EN#`. There is a
comment on the port side clarifying that it is actually active high.
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Fix all smart charger values by having boards provide the RSENSE values
and perform the register calculations in the code.
The galp3-c, galp5, gaze16, and gaze17 do not seem to have the same
behavior as the rest of the boards, and further investigation is needed.
In the mean time, reduce their charge current values to preserve current
behavior.
Ref: OZ26786-DS v1.0
Ref: bq24780S Rev. C datasheet
Signed-off-by: Tim Crawford <tcrawford@system76.com
In proprietary firmware and QMK, the Break key by itself is always just
Pause. They produce the same scan code, but Ctrl must be held for the OS
to recognize it as Break.
Behavior tested with xev.
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Ensure rustup is up-to-date to avoid users having a version that is too
old to support the TOML format.
If rustup was just installed, tell the user to source the new env vars
to use the correct version of the toolchain.
Signed-off-by: Tim Crawford <tcrawford@system76.com>
The IT81202E, despite using a different core, contains sufficiently
equivalent documentation to IT8587E and IT5570E for most tasks except
interrupt management. Provide it as a reference since we cannot share
the datasheets for the models we use.
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Calculating diffs with *unsigned* integers will always produce the
correct result, as long as the diff is less than the type max.
For example, suppose we read 254 and 2 for an 8 bit value:
2 - 254 = 4
Using this property, simplify diffs on time_get() comparisons.
Signed-off-by: Tim Crawford <tcrawford@system76.com>
ecflash has no verification for the EC it detects. It will attempt to
read and erase whatever it finds, where it will hang. Document what it
*should* read and an example of what it *shouldn't* read.
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Explicitly affix the literal with `U` so SDCC will directly call
`moduint()` instead of `modsint()`.
Signed-off-by: Tim Crawford <tcrawford@system76.com>
