53d4c31798
lemp9: lower maximum fan speed
2020-04-17 15:28:35 -06:00
357fae86fc
System76 common board directory ( #53 )
...
* Move configuration for battery into board.mk
* lemp9: remove tcpm code
* Move touchpad to its own module
* Add kbled_reset to all platforms, move items to run on CPU reset to a function
* Add defines for battery and charger address
* Add I2C_0 export to it5570e
* Move common system76 board functions into src/board/system76/common
2020-04-14 17:23:29 -06:00
b4e1346edb
Remove power on after flashing support - BRAM is not persisted through AC disconnects
2020-04-09 09:18:25 -06:00
65ba339fb5
Sync fan changes to darp5/galp3-c
2020-04-08 12:15:55 -06:00
747dc84b5b
Increase heatup time to 10 seconds and disable interpolation
2020-04-08 12:14:01 -06:00
d05607475c
Add missing header for BRAM
2020-04-08 08:58:59 -06:00
1194472b8f
Add power on after reset flag
2020-04-07 21:11:49 -06:00
ff639a7836
Set fan to 100% when in scratch ROM
2020-04-06 14:19:11 -06:00
dc246237c6
Add a watchdog timer of 10 seconds when using scratch ROM
2020-04-06 14:11:57 -06:00
8af9470c40
lemp9: lower fan curve maximum temperature to 80C
2020-04-05 13:16:05 -06:00
113a4b23ab
Fix lemp9 current draw
2020-04-05 11:54:34 -06:00
e8f8daae1b
Set input current limits
2020-04-05 10:34:25 -06:00
d901907942
Sync changed between system76 boards
2020-04-05 08:47:24 -06:00
825677bfb5
Turn off VDD3 when CPU is off and AC is not connected
2020-04-04 19:36:01 -06:00
ee8e0a2257
Correct GPIO control settings
2020-04-04 19:35:36 -06:00
ed0e662d60
Cut lemp9 charging current in half to lower charging heat
2020-04-04 15:11:59 -06:00
32055d825e
Re-enable interpolation of duty cycle
2020-04-04 13:30:33 -06:00
62a909ee81
Improve fan curve
...
- Implement fan cooldown and heatup periods
- Add fan get/set commands
- Fix compilation with logging level lower than debug
2020-04-04 07:30:05 -06:00
4fdb9ecbdc
Fix fan turning on when powering on or resuming from suspend
2020-04-01 20:03:09 -06:00
9bf09e211c
kbscan: Ignore key presses with ghost keys
2020-03-31 13:40:56 -06:00
ebcd545746
kbscan: Add function to read row from matrix
2020-03-31 13:40:56 -06:00
d96147688d
Fix calculation of S3 power state, remove S4 power state
2020-03-17 12:49:11 -06:00
7fbad82088
Improve power handling to eliminate lockups
2020-03-17 11:12:59 -06:00
f179052dcb
Orientation for use with new adapter
2020-03-16 15:38:23 -06:00
8a8ab165a7
Improve print command
2020-03-14 21:06:18 -06:00
d800af5ed6
Fix unflipped pin mapping
2020-03-14 20:41:40 -06:00
606421abd1
Add console_external target
2020-03-14 20:40:44 -06:00
6cbc7b3ea1
Remove delays from parport_write
2020-03-14 20:39:47 -06:00
abcc8c00e0
Remove unnecessary sleeps from parallel_transaction
2020-03-14 20:38:52 -06:00
8f3588ef6b
Leave parallel pins in HiZ until a command is issued.
2020-03-14 20:05:35 -06:00
85cd16ca30
WIP: Support parallel port logging with Arduino Uno
2020-03-12 14:19:55 -06:00
abf5c3f20b
mega2560: Add pin configuration for IT5570
2020-03-06 11:16:09 -07:00
e5afb927b8
system76/*: Add parport logging
...
Add a build-time option to configure the parallel port for logging
instead of using it as a keyboard.
2020-03-06 11:15:58 -07:00
72b453ebd3
it8587e, it5570e: Implement logging to parport
...
Implement configuring the keyboard controller as a parallel host device
and writing to the parallel port. This allows the EC to send log
messages over the port.
2020-03-06 11:15:51 -07:00
0f666abb25
mega2560: Implement debug console command
...
Reconfigure the Mega 2560 as a parallel peripheral device to receive
logs from the EC over the keyboard port and output them to the serial
console.
2020-03-06 11:15:45 -07:00
364b7c3af8
Rename flash targets
2020-03-02 14:11:57 -07:00
a24f9ed3ae
Cleanup use of scratch rom for SPI flashing, prepare to implement no-reset flashing process
2020-02-27 13:21:04 -07:00
14bb3af80b
Fix lemp9 menu key #29
2020-02-26 15:14:43 -07:00
68b9acd249
Add ability to flash backup rom
2020-02-26 13:43:31 -07:00
1e1c626d71
Port changes from galp3-c to darp5 and lemp9
2020-02-26 13:11:50 -07:00
657437e1ce
Faster flashing with SMFI ( #32 )
...
* WIP: support for new flashing API
* Add SPI flashing support to tool
* Add timeouts when flashing with ectool
* Test SPI reading
* Use chunks for SPI commands
* Sanity test of flash size
* Read rom in sectors
* Relocate memmap region, remove PMC3
* Use ectool to flash
* Remove debugging of spi command
* Fix flashing over smfi
2020-02-26 09:04:40 -07:00
a176da0ebe
kbc: Handle setting typematic rate/delay
...
Per [1], use a default delay of 500ms and a rate of 10.9 CPS. When the
Linux kernel starts, this will be updated by atkbd to the fastest
settings possible [2]: 250ms delay and 30 CPS.
Modifying these values with kbdrate to test settings will cause two
spurious ACKs in the kernel. This behavior is also present in the
proprietary firmware.
[1]: https://web.archive.org/web/20180217074705/http://computer-engineering.org/ps2keyboard/
[2]: c5f8689118/drivers/input/keyboard/atkbd.c (L863-L868)
2020-02-25 14:21:10 -07:00
a8f921fcab
kbscan: Implement key repeat
2020-02-25 13:28:09 -07:00
316895bdea
Use ectool for console
2020-02-24 14:10:52 -07:00
f1cf00bdb8
Do not spin in scratch PMC handling
2020-02-24 14:08:16 -07:00
83c224c229
Decrease pmc latency
2020-02-24 09:45:10 -07:00
130ab9d61f
Add power_on_s5 for DEEP_SX to darp5 and galp3-c
2020-02-24 09:07:35 -07:00
aa065f0a05
Fix double setting of low keyboard outputs
2020-02-24 09:07:02 -07:00
ce3a097b9b
Merge pull request #27 from system76/wip/wake-s3
...
Wake from S3 using any key
2020-02-24 09:00:43 -07:00
e7779065bb
Switch back to default keymap
2020-02-24 07:44:09 -07:00
