Entry points from assembly to C need to have the stacks aligned
to 16 bytes with the newer compilers. This entry point was
missed. Correct it.
BUG=b:72728953
Change-Id: Idb29daf830c05fd5543c2194690364ce31b6a22c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25763
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Currently the idt setup and handling is only in ramstage. In
order to prepare having an exception handler in other stages
move the interrupt vector entry code to its own compilation
unit. vec0 and int_hand need to be global so c_start.S
references will resolve at link time.
BUG=b:72728953
Change-Id: I435b96d987d69fb41ea27a73e2dd634b5d6ee3d9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25760
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
dimm_info.serial had a strange contract. The SPD spec defines a 4 byte
serial number. dimm_info.serial required a 4 character ascii string with
a null terminator.
This change makes the serial field so it matches the SPD spec.
smbios.c will then translate the byte array into hex and set it on the
smbios table.
There were only two callers that set the serial number:
* haswell/raminit.c: already does a memcpy(serial, spd->serial, 4), so
it already matches the new contract.
* amd_late_init.c: Previously copied the last 4 characters. Requires
decoding the serial number into a byte array.
google/cyan/spd/spd.c: This could be updated to pass the serial number,
but it uses a hard coded spd.bin.
Testing this on grunt, dmidecode now shows the full serial number:
Serial Number: 00000000
BUG=b:65403853
TEST=tested on grunt
Change-Id: Ifc58ad9ea4cdd2abe06a170a39b1f32680e7b299
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/25343
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change f43adf0 (intel/common/block/cpu: Change post_cpus_init after
BS_DEV RESOURCES) moved post_cpus_init to BS_OS_RESUME for S3
path. This results in BSP timing out waiting for APs to be
parked. This change increases the time out value for APs to be parked
to 250ms. This value was chosen after running suspend-resume stress
test and capturing the maximum time taken for APs to be parked for
100 iterations. Typical values observed were ~150ms. Maximum value
observed was 152ms.
BUG=b:76442753
TEST=Verified for 100 iterations that suspend-resume does not run into
any AP park time out.
Change-Id: Id3e59db4fe7a5a2fb60357b05565bba89be1e00e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/25422
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
In case of all DMI Type 17 to be empty, the strip trailing whitespace
code will have a zero length Part Number entry, which will cause
exception when using (len - 1) where len is zero. Add extra code to
cover this corner case.
BUG=b:76452395
TEST=Boot up fine with meowth platform, without this patch system will
get stuck at "Create SMBIOS type 17".
Change-Id: Id870c983584771dc1b60b1c99e95bbe7c0d25c4c
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/25377
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
dmidecode used to print
'HMAA51S6AMR6N-UH '
it now prints
'HMAA51S6AMR6N-UH'
BUG=b:65403853
TEST=Verified using dmidecode
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ia10ef434a2377e34ae7a8f733c6465c2f8ee8dfa
Reviewed-on: https://review.coreboot.org/25302
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The VA space needs to be extended to support 48bit, as on Cavium SoCs
the MMIO starts at 1 << 47.
The following changes were done to coreboot and libpayload:
* Use page table lvl 0
* Increase VA bits to 48
* Enable 256TB in MMU controller
* Add additional asserts
Tested on Cavium SoC and two ARM64 Chromebooks.
Change-Id: I89e6a4809b6b725c3945bad7fce82b0dfee7c262
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/24970
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Some DIMMs have invalid strings when it comes to device part number
(bytes 0x149-0x15c). From DDR4 SPD specs it should be ASCIIZ with unused
space filled with white spaces (ASCII 0x20). Byte 20 should be 0 (ASCIIZ),
all others should be ASCII.
Create a test that detects invalid strings and replace invalid
characters with *. If a replacement was made the output string then must
be <Invalid (replaced string)>.
BUG=b:73122207
TEST=Build, boot and record serial output for kahlee while injecting
different strings to dmi17->PartNumber. Use code to examine SMBIOS,
while testing different valid and invalid strings.
Remove string injection before committing.
Change-Id: Iead2a4cb14ff28d263d7214111b637e62ebd2921
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/23844
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Update encoding.h to the version shipped with spike commit
0185d36 ("Merge pull request #165 from riscv/small_progbuf"),
and copy the license header from the LICENSE file.
Change-Id: I517042e5865986e88a589dc8623745f8d584d6b8
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/23773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The RISC-V boot protocol foresees that at every stage boundary (bootrom
to boot loader, boot loader -> OS), register a0 contains the Hart ID and
a1 contains the physical address of the Flattened Device Tree that the
stage shall use.
As a first step, pass the bootrom-provided FDT to the payload,
unmodified.
Change-Id: I468bc64a47153d564087235f1c7e2d10e3d7a658
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/23797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Due to changes in the RISC-V Privileged Architecture specification,
Linux can now be started in physical memory and it will setup its own
page tables.
Thus we can delete most of virtual_memory.c.
Change-Id: I4e69d15f8ee540d2f98c342bc4ec0c00fb48def0
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/23772
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
In order to support RISC-V processors with and without the RVC
extension, configure the architecture variant (-march=...) explicitly.
NOTE: Spike does support RVC, but currently doesn't select
ARCH_RISCV_COMPRESSED, because coreboot's trap handler doesn't
support RVC.
Change-Id: Id4f69fa6b33604a5aa60fd6f6da8bd966494112f
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/23733
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The RISC-V Privileged Architecture spec 1.10 requires that the address part of
mtvec is four-byte aligned. The lower two bits encode a "mode" flag and should
be zero for now.
Add the necessary alignment directive before trap_entry.
Change-Id: I83ea23e2c8f984775985ae7d61f80ad75286baaa
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/23173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
There are now a few architectural extensions available for ARMv8, some
of which introduce instructions or other features that may be useful.
This allows the user to select an extension implemented on their SoC
which will set the -march option passed into the compiler.
Change-Id: Ifca50dad98aab130ac04df455bac2cfb65abf82e
Signed-off-by: David Hendricks <dhendricks@fb.com>
Reviewed-on: https://review.coreboot.org/23641
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This patch changes the way coreboot builds ARM TF to pass the new
COREBOOT flag introduced with the following pull request:
https://github.com/ARM-software/arm-trusted-firmware/pull/1193
Since the new coreboot support code supports the CBMEM console, we need
to always enable LOG_LEVEL INFO. Supporting platforms will parse the
coreboot table to conditionally enable the serial console only if it was
enabled in coreboot as well.
Also remove explicit cache flushes of some BL31 parameters. Turns out we
never really needed these because we already flush the whole cache when
disabling the MMU, and we were already not doing it for most parameters.
Change-Id: I3c52a536dc6067da1378b3f15c4a4d6cf0be7ce7
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/23558
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Some x86 platforms don't have a TSC that is invariant w.r.t.
rate to get accurate timestamps. As such a different timestamp
is required. Therefore, allow one to specify non-TSC timestamp
source and not compile in the default x86 TSC code.
BUG=b:72378235,b:72170796
Change-Id: I737fcbba60665b3bc2b5864269536fda78b44d90
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/23423
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
The PNOT method never notifies the CPU to update it's _CST methods due
to reliance on inexisting variable (PDCx).
Add a method in the speedstep ssdt generator to notify all available
CPU nodes and hook this up in this file.
The cpu.asl file is moved to cpu/intel/speedstep/acpi since it now
relies on code generated in the speedstep ssdt generator. CPUs not
using the speedstep code never included this PNOT method so this is
a logical place for this code to be.
Change-Id: Ie2ba5e07b401d6f7c80c31f2bfcd9ef3ac0c1ad1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/23144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
All boards and chips that are still using LATE_CBMEM_INIT are being
removed as previously discussed.
If these boards and chips are updated to not use LATE_CBMEM_INIT, they
can be restored to the active codebase from the 4.7 branch.
chips:
cpu/intel/socket_mFCBGA479
northbridge/intel/i82830
Mainboards:
mainboard/rca/rm4100
mainboard/thomson/ip1000
Change-Id: I9574179516c30bb0d6a29741254293c2cc6f12e9
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/22032
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The code dealing with the old config string isn't needed anymore,
because the config string has been deprecated in favor of
OpenFirmware-derived devicetrees.
Change-Id: I71398fb4861dbaf7eefc6e6f222bb7159798fafa
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/22594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This Supervisor Binary Interface, which is based on a page of code
that's provided to operating systems by the M-mode software, has been
superseded by a different (currently not really documented) SBI, which
is based on directly executing ECALLs instructions. Thus some of our
code becomes obsolete. Just rip it out until we implement the new SBI.
Change-Id: Iec9c20b750f39a2b8f1553e25865bbf150605a6d
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/22593
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The commit 93bbd41e (soc/intel: Enable ACPI DBG2 table generation)
causes a crash on the mainboard mc_apl1. On this mainboard all internal
SOC UARTs in the devicetree are switched off. As a result, no resources
are allocated to the UARTs. The function find_resource() expects an
existing resource. Otherwise, the CPU will stop. It should therefore not
only be queried whether a device is present, but also whether it is
enabled.
Change-Id: I56ce44ae0cf77916fcb640f79fb8944fe33177cd
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/22552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Accessing the config string doesn't work anymore on current versions of
spike. Thus return dummy pointers until we have a better solution.
Change-Id: I684fc51dc0916f2235e57e36b913d363e1cb02b1
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/21687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Emits a list of CPU cores, e.g.
Name (PPKG, Package (2) { \_PR.CP00, \_PR.CP01 })
Tested on Lenovo Thinkpad T500.
Change-Id: I10e9ebad84343d1fb282b3fbb28f5f014f664f14
Signed-off-by: Nico Huber <nico.h@gmx.de>
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/21324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Clang Static Analyzer warns about an unused assignment, when
building the image for the Lenovo X60.
```
src/arch/x86/gdt.c:39:6: warning: Value stored to 'num_gdt_bytes' \
during its initialization is never read
u16 num_gdt_bytes = (uintptr_t)&gdt_end - (uintptr_t)&gdt;
^~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
If `CONFIG_RELOCATABLE_RAMSTAGE` is selected, the function returns
before the assignment is used. So, move the assignment below the if
statement.
Change-Id: Ibcb8bce743d8cb3625647804816fb97f937dc429
Found-by: clang version 4.0.1-6 (tags/RELEASE_401/final), Debian Sid/unstable
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/21957
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Martin Roth <martinroth@google.com>
In commit c06a3f72 (arch/x86: initialize EBDA in S3 and S0/S5 path),
BDA and EBDA are wiped in the resume path. It results in coreboot
forwarding table address being wiped out since it is stored in the
BDA. This issue was resolved for platforms using EARLY_EBDA_INIT in
commit f46a9a0d (arch/x86: restore forwarding table on resume for
EARLY_EBDA_INIT). However platforms that do not use EARLY_EBDA_INIT
still run into the same issue and hence cbmem does not work on
resume. This change fixes the issue by using the stash/restore of
forwarding table address for all platforms using BDA.
BUG=b:68412690
TEST=Verified that cbmem works on S3 resume for coral.
Change-Id: I42ae2ccb0b4ce8e989b1032d82b9bb34d0d84db0
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/22207
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
In commit c06a3f72 (arch/x86: initialize EBDA in S3 and S0/S5 path)
the BDA and EBDA are wiped in the resume path. However, the coreboot
table forwarding entry wasn't taken into account so that was wiped
which resulted in cbmem not working on the resume path. Fix this
by stashing the forwarding table in cbmem and restoring it on
the resume path.
Change-Id: I142503535a78635fbb1c698fc7d032c1a2921813
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/22078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
It's more consistent to re-initialize EBDA in all boot paths.
That way, the data living in EBDA is cleared prior to be
accessed (assuming it's after setup_ebda()).
Change-Id: I05ff84f869f7b6a463e52b4cb954acc5566475cd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/21997
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
