This reverts commit 884467a2b5.
Without these names, Windows fails with INTERNAL_POWER_ERROR (0xA0)
bugcheck with paramter 0x680. Linux reports errors for the devices, but
continues to work.
Change-Id: I5ced77f23929c39cc50276b17ac4b469c93fc250
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Device 0:01.1 does not exist on ADL-P. I assume this works because the
bridged device has function 1.
Fixes the following error in Linux:
pcieport 0000:00:01.0: can't derive routing for PCI INT B
snd_hda_intel 0000:01:00.1: PCI INT B: no GSI - using ISA IRQ 10
Which in turn resolves the conflict with the PCH HDA device...again:
irq 10: nobody cared (try booting with the "irqpoll" option)
<snip>
[<00000000bf549647>] azx_interrupt [snd_hda_codec]
Disabling IRQ #10
Change-Id: I9d9a0003764a1e031be578c1f406b2a5d7512de7
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Intel rewrote the git history with the latest release. The following 2
commits no longer exist:
* 6c0c469 Merge pull request #59 from esyr-rh/microcode-20220510-releasenote-fixes
* 6ff5aa2 releasenote.md: changes summary fixes for microcode-20220510
Fixes building new checkouts of coreboot the require microcode blobs.
Change-Id: Id206bff57038178a362acf5ca2cdbe998381535d
Ref: commit 97144eee85 ("3rdparty/intel-microcode: Update submodule to recent main branch")
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Correct the PCH PCIe RP indexes, which were copied from darp8.
Fixes using Ethernet and the SD card reader.
Change-Id: If14dea0492f6b7bea62d482ab970fe43e17c107b
Signed-off-by: Tim Crawford <tcrawford@system76.com>
This partial reverts commit d8d522884b.
These devices names cause ACPI errors in Linux as they are missing from
the DSDT.
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.SRAM (20211217/dspkginit-438)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.HEC1 (20211217/dspkginit-438)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.PCI0.FSPI (20211217/dspkginit-438)
Ref: https://review.coreboot.org/c/coreboot/+/63984
Change-Id: I644d2363d7e3c64af1d21e2a44bc3463819dd860
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Fixes the following warnings on Linux:
pcieport 0000:00:06.0: can't derive routing for PCI INT D
pcieport 0000:00:06.2: can't derive routing for PCI INT B
Change-Id: I49406e0db77cf2391972f6660729bd0a41a34f13
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Copy the constraints from ADL-S to ADL-P.
Fixes the following warning in Linux on System76 oryp9, which has an
NVIDIA GPU on the bridge.
pcieport 0000:00:01.0: can't derive routing for PCI INT A
This, in turn, resolves an IRQ conflict with the PCH HDA device that
would cause a stack track on every boot.
irq 10: nobody cared (try booting with the "irqpoll" option)
<snip>
[<00000000bf549647>] azx_interrupt [snd_hda_codec]
Disabling IRQ #10
Change-Id: I550c80105ff861d051170ed748149aeb25a545db
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Split `gpio.h` into `gpio_early.c` for bootblock and `gpio.c` for
ramstage to match other System76 boards.
Change-Id: I24398ad459754ac80d92d70687ab70b22894a01c
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Use the actual model name for the variant dir.
Change-Id: I199b8efb5c3cddb8943ba4b761546caa11c67a30
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Use the new "detect" method instead of "probed". Fixes an uncommon issue
where I2C HID fails to initialize the device in Linux.
Change-Id: I6a899c64a6d77b65a2ae57ab8df81cd84b568184
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Re-add FSP-S configs from the 4.13 branch, which were not included when
upstreamed.
Change-Id: I5f99d088190df07213c5b615f36fde29831aad86
Signed-off-by: Tim Crawford <tcrawford@system76.com>
The Bonobo has 2 AMPs: one for the speakers and one for the subwoofer.
Smart AMP data was collected using a logic analyzer connected to the IC
during system start on proprietary firmware. This data is then used to
generate a C file [1].
[1]: https://github.com/system76/smart-amp
Change-Id: I5389a9890563ebd3adb20096b6225f474bc006f9
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Add custom backlight levels for all models except:
- addw1
- bonw14: Does not use the iGPU
Change-Id: Ibea37f19acca0d718211fc41706019a92a240c70
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Add a driver for laptops with NVIDIA Optimus (hybrid) graphics. The
driver provides ACPI support for dynamically powering on and off the
GPU, and a function for enabling the GPU power in romstage.
Tested on system76/gaze15.
References:
- DG-09845-001: NVIDIA GN20/QN20 Hardware Design Guide
- DG-09954-001: NVIDIA GN20/QN20 Software Design Guide
Change-Id: I2dec7aa2c8db7994f78a7cc1220502676e248465
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Early EOP prevents disabling CSME.
Disabling CSME now occurs, but checking the result fails:
[DEBUG] HECI: ME state change send success!
[DEBUG] HECI: ME state change result failure!
CSME is disabled on subsequent boots.
Change-Id: I1c1416bb6537774f4bf09820c551b3b4ca7d1a38
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Fixes detection of the on-board RAM (Samsung K4AAG165WA-BCWE) on the
System76 Lemur Pro 11 (lemp11).
Change-Id: Ibe56c0f2b81d660303429cd2e21a7bb6cd433da5
Signed-off-by: Tim Crawford <tcrawford@system76.com>
BIOS must send the IP_LOAD HECI command to fetch the firmware for CPU
PCIe Gen5 and upload it via CPU REG BAR prior FSP Silicon Init.
Implementation based on public Slimbootloader's
"Silicon/AlderlakePkg/Library/CpuPcieHsPhyInitLib".
TEST=Boot MSI PRO Z690-A and see the HSPHY FW is loaded.
PCIe x16 Gen3 GPU card started working in the PCIE 5.0 slot.
[DEBUG] HECI: Sending Get IP firmware command
[DEBUG] HECI: Get IP firmware success. Response:
[DEBUG] Payload size = 0x6944
[DEBUG] Hash type used for signing payload = 0x3
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I6c6c11581e3d3d9bab0131fae6ef487cafe98080
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
SMMSTORE support in edk2 was not allowed in upstream edk2
as it was bootloader specific.
Shortly, it will be built from edk2-platforms and then,
it will be retired.
For now, the patches exist in the MrChromeBox fork (TIANOCORE_UEFIPAYLOAD), so enable
these by default when SMMSTORE_v2 is enabled.
Change-Id: I1861bf739c2e25f661b4f06a303348f0537dc8b3
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65867
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- Move configs for PCIe ports not present on z220_sff_workstation
from the devicetree.cb of base board to the overridetree.cb of
z220_cmt_workstation.
- Add a note for ME/AMT Flash Override jumper, for it is hard to
flash from OEM firmware either internally or externally without
closing this jumper.
- Add a side note for similar HP Compaq Elite 8300 SFF.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I35d8b97f52a83910a61c12b1f7367ee7a19a9ad7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65703
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
futility now supports image truncation and signing of whole images with
a single command invocation. Use it for vboot-enabled coreboot images.
TEST=Build and run coreboot on google/volteer
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I49eb7e977b635ccb9f6c1b76e53c36e82be1d795
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
