MRC fast boot causes issues with memory init reusing invalid values
when DIMMs are switched.
Change-Id: Ia053982f747b2e794b974b84d57a9ead61ddd2ea
Signed-off-by: Jeremy Soller <jackpot51@gmail.com>
The ACPI is adjusted based on SOFTWARE_CONNECTION_MANAGER, so set
the UPD to match this to avoid the connection type being
mismatched.
If it's mismatched, the TBT port will timeout.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3ab68c01f682723dab39870f0676e59ae3d89add
The latest Clevo boards connect the TAS5825M to one of the I2C
connections instead of the SMBus connection. The I2C ops are compatible
with SMBus, so always use them.
Change-Id: I5152db647094acf473cc798970dd9d97543df4d7
Signed-off-by: Tim Crawford <tcrawford@system76.com>
The month argument passed to rtc_month_days is 0-based, not 1-based.
This results in the RTC being reverted to the build date constantly
on 29th February 2024.
Change-Id: If451e3e3471fef0d429e255cf297050a525ca1a2
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80790
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
Port fix from Alder Lake to not set/reset IOM MCTP during
D3 cold entry or exit.
Ports 5008d340033d ("soc/intel/adl: Remove IOM Mctp command from TCSS
ASL"):
> Recently as part of s0ix hang issue, it was found that sending IOM
> MCTP command as part of TCSS D3 Cold enter-exit sequence created an
> issue.
> We discovered that due to change in hardware sequence, ADL should not
> set/reset IOM MCTP during D3 cold entry or exit. This patch removes
> the bit setting from ASL file to prevent hang in the system.
> This patch also removes obsolete Pcode mailbox communication which
> is no longer required for ADL.
> BUG=b:220796339
> BRANCH=firmware-brya-14505.B
> TEST=Check if hang issue is resolved with the CL and no other
> regression
> observed
> https://review.coreboot.org/c/coreboot/+/62861
Test: build/boot drobit to Win11. Verify TCSS XHCI power management
working and USB Root Hub doesn't Code 43 in device manager
Change-Id: I40a537fd2b0c821caf282f52aaff1874f54325f1
Signed-off-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80719
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Port 9c348a7b7ea3 ("soc/intel/alderlake: Fix processor hang while plug
unplug of TBT device") from Alder Lake to fix a similar issue present
on Tiger Lake:
> Processor hang is observed while hot plug unplug of TBT device. BIOS
> should execute TBT PCIe RP RTD3 flow based on the value of
> TBT_DMA_CFG_VS_CAP_9[30]. It should skip TBT PCIe RP RTD3 flow, if
> BIT30 in TBT FW version is not set.
> BUG=b:194880254
> https://review.coreboot.org/c/coreboot/+/56503
Change-Id: Ie5409111d4239be86c0b153f01b4fe5fc6af352c
Signed-off-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80718
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
System sleep time (SLP_S0 signal asserted) is measured in ticks, for
Alder Lake soc in 122us (i.e. ~8197Hz) granularity/ticks.
BUG=b:301854636
TEST=/sys/devices/system/cpu/cpuidle/
low_power_idle_system_residency_us" will show system idle residency time
Change-Id: I449f7ed0d9ef891ae5266e8fd784a063a75e38eb
Signed-off-by: Marx Wang <marx.wang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
The ACPI is adjusted based on SOFTWARE_CONNECTION_MANAGER, so set
the UPD to match this to avoid the connection type being mismatched.
If it's mismatched, the TBT port will time out.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I8a99db165301ce08caf55aac0e33ca1994559d62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80486
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Commit 2d482386182e ("soc/intel/alderlake: Set PchHdaSdiEnable for Alder
Lake") hooked up a new UPD, overriding the FSP default and causing HDA
init to break. Hook up the new UPD in the devicetree to restore HDA
functionality.
Also remove PchHdaAudioLinkHdaEnable per board romstage, as it set in
the devicetree.
Change-Id: I2533fa829fac4913308379788911339effa36d9f
Signed-off-by: Tim Crawford <tcrawford@system76.com>
On Raptor Lake based systems with TCSS, Linux will report ACPI
errors for \_SB.PCI0.TDM0 and \_SB.PCI0.TRP0. This is due to the
tcss.asl file only being included for one specific mainboard. This
change includes tcss.asl for all Raptor Lake models.
Change-Id: I2d8de7a77cfa91cd8bdbb9c3048e21d0a677d2fa
Signed-off-by: Dan Campbell <dan@compiledworks.com>
The FSP may fail to detect PCIe 4.0 devices in PCIe 3.0 slots on S3
resume. This issue has only been experienced on lemp12, and only with
Samsung drives, but implies it could happen on other systems or with
other drives as well.
Tested on lemp12 with Samsung 980 PRO and 990 PRO drives.
Change-Id: Ieacab03f6cb0943ed2a589e9bb7669d3d8fd45ae
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Retry calling the SMI 5 times in case the initial write to APM did not
cause SMM entry immediately.
Fixes occasional SMMSTORE initialization failure on Clevo NV4xPZ with
Intel i5-1240P processor. The issue was especially evident when all
logging in coreboot was disabled.
Based on SMMSTORE implementation in MrChromebox's fork of EDK2:
27854bc8c5
Change-Id: I8929af25c4f69873bbdd835fde5cb60fc324b6ab
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Some drives block the CPU from reaching C10 on suspend without the RTD3
config.
Fixes suspend with the following drives:
- Kingston KC3000 (SKC3000D/4096G)
- Kingston HyperX (SHPM2280P2H/240G)
- Solidigm P44 Pro (SSDPFKKW010X7)
The following drives continue to work:
- Samsung 970 Evo (MZVLB250HAHQ)
- WD Black SN770 (WDS250G3X0E)
- WD Green SN350 (WDS240G2G0C-00AJM0)
- WD Blue SN570 (WDS100T3B0C)
Change-Id: I205d78377fa2b0db8d37542cdb94ba86ded1d66e
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Tested-by: Levi Portenier <levi@system76.com>
Since these boards will use S0ix they need to leave CSME enabled for the
CPU to reach C10.
Change-Id: I70c908402c9964508bb9c439d48d24773f5a35ab
Signed-off-by: Tim Crawford <tcrawford@system76.com>
The newer batch of these boards do not de-assert VW PLTRST# on S3
resume, causes the units to not power on in the EC code. Switch them to
S0ix by default, but leave S3 available.
Change-Id: I95337c1391102db9e020e82bdd938659c1a4f905
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Change-Id: I202c0607c2cdac1df59f42fb41735704dd5bd95c
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Add a driver for laptops with NVIDIA Optimus (hybrid) graphics. The
driver provides ACPI support for dynamically powering on and off the
GPU, NVIDIA Dynamic Boost support, and a function for enabling the GPU
power in romstage.
References:
- DG-09845-001: NVIDIA GN20/QN20 Hardware Design Guide
- DG-09954-001: NVIDIA GN20/QN20 Software Design Guide
Change-Id: I2dec7aa2c8db7994f78a7cc1220502676e248465
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Device 0:01.1 does not exist on ADL-P. I assume this works because the
bridged device has function 1.
Fixes the following error in Linux:
pcieport 0000:00:01.0: can't derive routing for PCI INT B
snd_hda_intel 0000:01:00.1: PCI INT B: no GSI - using ISA IRQ 10
Which in turn resolves the conflict with the PCH HDA device...again:
irq 10: nobody cared (try booting with the "irqpoll" option)
<snip>
[<00000000bf549647>] azx_interrupt [snd_hda_codec]
Disabling IRQ #10
Change-Id: I9d9a0003764a1e031be578c1f406b2a5d7512de7
Signed-off-by: Tim Crawford <tcrawford@system76.com>
The Bonobo has 2 AMPs: one for the speakers and one for the subwoofer.
Smart AMP data was collected using a logic analyzer connected to the IC
during system start on proprietary firmware. This data is then used to
generate a C file [1].
[1]: https://github.com/system76/smart-amp
Change-Id: I5389a9890563ebd3adb20096b6225f474bc006f9
Signed-off-by: Tim Crawford <tcrawford@system76.com>
The HX board, using PCH-S, use a discrete Thunderbolt device (Intel
Maple Ridge), as opposed to a built-in one like the boards using PCH-P.
Fixes Thunderbolt on RPL-HX boards using the Maple Ridge controller.
Change-Id: I53d18f3ec5a084431e1113782c791bcb42728350
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Add a new driver for discrete Thunderbolt controllers. This allows using
Maple Ridge devices on Raptor Point PCH.
Change-Id: Ib78ce43740956fa2c93b9ebddb0eeb319dcc0364
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Change-Id: I8bdc4c676a0f571fd8f34e078f6a1c73a2e90a87
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
CB:52731 introduced support for reading SPD from the EEPROM via SMBus.
Replace the now unneeded workaround for DDR5 with filling in the correct
channels for DDR5.
Change-Id: I5a92199a7cd2718e9396f0dac8257df40e4f834c
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
DDR5 uses a Serial Presence Detect EEPROM with hub function
(SPD5 hub device) to store the spd data.
This CL adds support to read the spd5 hub device via smbus.
BUG=b:180458099
TEST=Boot adlrvp DDR5 board to kernel
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: Ic5e6c58f255bef86b68ce90a4f853bf4e7c7ccfe
The Infineon SLB 9672 on newer Clevo machines regularly fails TPM Resume
on S3 with the error `TPM_RC_VALUE`.
Per TPM2 spec, handle the failure by performing a TPM Restart.
> The startup behavior defined by this specification is different than
> TPM 1.2 with respect to Startup(STATE). A TPM 1.2 device will enter
> Failure Mode if no state is available when the TPM receives
> Startup(STATE). This is not the case in this specification. It is up
> to the CRTM to take corrective action if it the TPM returns
> TPM_RC_VALUE in response to Startup(STATE).
Fixes the following error from being repeatedly logged in Linux:
> kernel: tpm tpm0: A TPM error (256) occurred attempting get random
Ref: Trusted Platform Module Library, Part 1: Architecture, rev 1.59
Change-Id: I3388007d4448c93bd0dda591c8ca7d1a8dc5306b
Signed-off-by: Tim Crawford <tcrawford@system76.com>
These will be updated and finalized after the release to capture any
final changes, remove "upcoming release", and finalize all stats.
Change-Id: Idc224c43f2459faabf91a9ef282bb9eaeba42240
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80617
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: ron minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Select this at the SoC level (like other modern Intel SoCs), and drop
it from individual boards which selected it.
Change-Id: I838ada7dfe948c58a5bb9805ade289b07368aa63
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80556
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
It's not needed other than for booting w/SeaBIOS, where it is already
selected by default, and enabling it with edk2 payload prevents Linux/
Windows from fully entering S0ix.
TEST=build/boot purism/librem_cnl (Mini v2), verify Win11/Linux able
to enter and exit S0ix properly.
Change-Id: I974a82bedc4e06f48ce801f2bc0c29afbd80ffcf
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80602
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
The tcss.asl doesn't just relate to tcss, it is required for core
scheduling, so include it for all platforms.
Change-Id: I781ba8756e06133799e8d6d91302968cc3ea0a56
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80485
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds support for using ADL N 4-core MCH ID 0x4618.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3e4855ce93666c54ab35def9b58e4b13bc9a8672
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80488
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
