Disabling the Package C-state demotion feature for nissa baseboard
as a work around to the S0ix issue and also this doesn't have any
impact on the power and performance measured and verified by the
PNP team.
This feature will be enabled after its functionality is verified with no
issues and also based on its impact on PNP.
BUG=b:235005582
TEST=Boot and verify that S0ix issue is resolved.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: I4d586b962c27b86ee75651dcd655bc0868504646
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65664
Reviewed-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Aligning the "memory" ranges in devicetree is supposedly only needed on
very old arm32 kernels. So let's get rid of it.
Incidentally this fixes smaller than 1MB memory regions where the size
would end up being 0.
Change-Id: Ibbf5e331c79ed4ae3ed8dd37bf7a974d2412ce12
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65607
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This contains the following commits:
* d55c315 mb/starlabs: Remove padding from logo
* 6412d38 mb/starlabs/starbook/cml: Update EC from 1.03 to 1.07
* fb72ac5 mb/starlabs/starbook/tgl: Update EC from 1.00 to 1.03
* cda5eaa mb/starlabs: Rename labtop to starbook
* f16020a Revert "soc/mediatek/mt8186: Update SPM firmware to
pcm_suspend_v0215…
This also changes starlabs/labtop Kconfig to use the new paths for
the EC binaries from the above commits.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I83143118af422276ee335ad4ef9eca76f54a9fc0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65634
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
This patch fixes the issue with INTC1056 invalid resource reported by
alderlake-pinctrl Linux driver on ADL-S platform. The driver also
includes GPIO Community 3 in the GPIO list compared to ADL-N which
was missing in GPIO ACPI device.
TEST=Boot Ubuntu 22.04 on MSI PRO Z690-A DDR4 WIFI and check there is
no invalid resource error reported by alderlake-pinctrl
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I23da68c247de86438cc2eef2b5a5a9aa711c1d7e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65551
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Currently the EC's MKBP interrupt line is programmed as dual-routed to
both SCI and IOAPIC. The brya EC will pulse the MKBP GPIO and also
send a host event when there is an MKBP event for host to service.
This causes an extra SCI to be generated, and the kernel will respond
to each MKBP event with an extra unnecessary host command. Changing
the pad configuration for the MKBP GPIO to APIC only fixes this issue.
BUG=b:236706977
BRANCH=firmware-brya-14505.B
TEST=excess GET_NEXT_EVENT host commands are gone from EC log
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ic7dd596987f6d34c69d46674bdd07785235e2d4c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65480
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Configure TDC current for VR domains.
+-----------+-------+-------+---------+-------------+----------+
| Setting | AC LL | DC LL | ICC MAX | TDC Current | TDC Time |
| |(mOhms)|(mOhms)| (A) | (A) | (msec) |
+-----------+-------+-------+---------+-------------+----------+
| IA | 2.8 | 2.8 | 80 | 43 | 28000 |
+-----------+-------+-------+---------+-------------+----------+
| GT | 3.2 | 3.2 | 40 | 23 | 28000 |
+-----------+-------+-------+---------+-------------+----------+
- IA TDC current from 20A to 43A.
- GT TDC current from 20A to 23A.
- Others comes from 'commit c6d7166942 ("soc/intel/alderlake: Configure the SKU specific parameters for VR domains")'
BUG=b:237230877
TEST=Build and boot to Chrome OS
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: Ie9cf8975309b57b4189e2b50f37bd61ac0105e14
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65659
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
agah proto boards with i7 silicon face boot issues due to high power
consumption during MRC training.
This patch is a temporary WA to run in SAGV disabled mode while the
thermal issue is being investigated.
BUG=b:234402102
BRANCH=firmware-brya-14505.B
TEST=Build CB image and boot on agah board.
Change-Id: I431d233b23fb4f5c68117ea380fdec5646b88346
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65300
Reviewed-by: Selma Bensaid <selma.bensaid@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Initial mainboard code MSI PRO Z690-A DDR4 WIFI. The platform boots up
up to romstage where it returns from FSP memory init with an error.
What works:
- open-source CAR setup
- NCT6687D serial port with TX pin exposed on JBD1 header
- SMBus reading SPD from all 4 DIMMs
This board will serve as a reference board for enabling Alder Lake-S
support in coreboot. More code and functionalities will be added in
subsequent patches as src/soc/alderlake code will be improved for
PCH-S.
TEST=Extract the microcode from vendor firmware and include it in the
build. The platform should print the console on the serial port even
without FSP blob.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I5df69822dbb3ff79e087408a0693de37df2142e8
Signed-off-by: Igor Bagnucki <igor.bagnucki@3mdeb.com>
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
The comment indicates CSE's data partition is placed after BP2. But, it
was place after BP1.So, the patch updates the comment to reflect the
CSE Region layout correctly.
TEST=Build the code for Brya and didn't notice any compilation errors
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Ic871e2e395de17157f4f526064a26bfad538707f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
ConSplitterDxe uses the intersection of all outputs, which includes
serial, for the list of supported text modes. When serial output is
supported, this slows down performance and limits the size of
FrontPage.
Only enable edk2's serial support when it's a debug build as
it's the only case where there will be debug output.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ic3633767dabb3543e865aa65c4101840a7b69cc1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
FLASH_DUAL_READ is a common configuration for all MediaTek SoCs, so we
move it to common folder and select it in SoCs' Kconfig.
As suggested in CB:58837, we also rename FLASH_DUAL_READ to
FLASH_DUAL_IO_READ to reduce confusion.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: If267a332519412a7919c5b7817047fabe4a564c8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65620
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
There are more and more variables which are SoC-specific, so add
soc/wdt.h for each SoC and rename common/wdt.h to
common/wdt_common.h.
wdt_set_req() is almost the same for mt8192, mt8195 and mt8186, so
move it to a common file wdt_req.c.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I7a334b3e7cd4f24a848dd31aca546dc7236d5fb8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65636
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Sabrina previously didn't support UART mapping in psp verstage. Now that it has been enabled, add the relevant uart code here.
BUG=b:218709292
TEST=Set serial soft fuse, boot to kernel, check logs
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I591fa69b6e722929839babfff62e9d56c68e1112
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65532
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
