REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1135
For 4bit BMP, there are only 2^4 = 16 colors in the palette.
But when a corrupted BMP contains more than 16 colors in the palette,
today's implementation wrongly copies all colors to the local
PaletteValue[16] array which causes stack overflow.
The similar issue also exists in the logic to handle 8bit BMP.
The patch fixes the issue by only copies the first 16 or 256 colors
in the palette depending on the BMP type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1020
The Microcode region indicated by MicrocodePatchAddress PCD may contain
more than one Microcode entry. We should save InCompleteCheckSum32 value
for each payload. Move the logic for calculate InCompleteCheckSum32 from
the outsize of the do-while loop to the inside.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1576
The root cause of this issue is that non-stop mode of Heap Guard and
NULL Detection set TF bit (single-step) in EFLAG unconditionally in
the common handler in CpuExceptionLib.
If PcdCpuSmmStaticPageTable is FALSE, the SMM will only create page
table for memory below 4G. If SMM tries to access memory beyond 4G,
a page fault exception will be triggered and the memory to access
will be added to page table so that SMM code can continue the access.
Because of above issue, the TF bit is set after the page fault is
handled and then fall into another DEBUG exception. Since non-stop
mode of Heap Guard and NULL Detection are not enabled, no special
DEBUG exception handler is registered. The default handler just
prints exception context and go into dead loop.
Actually EFLAGS can be changed in any standard exception handler.
There's no need to do single-step setup in assembly code. So the fix
is to move the logic to C code part of page fault exception handler
so that we can fully validate the configuration and prevent TF bit
from being set unexpectedly.
Fixes: dcc026217f16b918bbaf
Test:
- Pass special test of accessing memory beyond 4G in SMM mode
- Boot to OS with Qemu emulator platform (Fedora27, Ubuntu18.04,
Windows7, Windows10)
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
* REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1577
In WiFi Connection Manager scan process, the result received
from WiFi device driver will be freed twice, and will cause
unexpected errors, and even system crash.
This issue also exists in some other places potentially, this
patch is to fix these issues and also add Timer Cancelling
before Close to avoid potential NULL reference.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=864
REF: CVE-2018-3630
To follow PI spec, ensure FfsFileHeader 8 bytes aligned.
For the integrity of FV(especially non-MemoryMapped FV) layout,
let CachedFv point to FV beginning, but not (FV + FV header).
And current code only handles (FwVolHeader->ExtHeaderOffset != 0) path,
update code to also handle (FwVolHeader->ExtHeaderOffset == 0) path.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
This reverts commit 838bc257ba.
After further evaluation, there are the unclear behavior in for the
driver combination feature. To not impact Q1 stable tag, remove it first.
1. If the drivers to be combined have the different PCD or library instance
setting, build should not combine them and report build break. But this
commit doesn't consider this case.
2. When start the sub driver fail, continue to start other sub driver. This
behavior is required to be clarifed in build spec.
3. Unload the sub driver when the combined driver start fail. This case need
to call the sub driver unload function for the driver start fail only.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
* V2
* Remove Arch dependency in Inf file
* Add a global guid for WiFi formset and set other guids to module levels
* Open supplicant and EapConfig by BY_DRIVER
* Remove token free function to avoid potential NULL reference
* Update WifiMgrUpdateConnectMessage() to only display message for Current Nic
* Fix the potential NULL reference in AIP call
* REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1492
Add WiFi Connection Manager in NetworkPkg to provide UI for users to scan
networks, connect or disconnect to networks.
This connection manager won't include the UNDI driver, supplicant driver,
or other device specific drivers and is therefor not a complete solution
stack for UEFI Wi-Fi, users can seek help for Wireless card vendors.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1521
We scan the SMM code with ROPgadget.
http://shell-storm.org/project/ROPgadget/https://github.com/JonathanSalwan/ROPgadget/tree/master
This tool reports the gadget in SMM driver.
This patch enabled CET ShadowStack for X86 SMM.
If CET is supported, SMM will enable CET ShadowStack.
SMM CET will save the OS CET context at SmmEntry and
restore OS CET context at SmmExit.
Test:
1) test Intel internal platform (x64 only, CET enabled/disabled)
Boot test:
CET supported or not supported CPU
on CET supported platform
CET enabled/disabled
PcdCpuSmmCetEnable enabled/disabled
Single core/Multiple core
PcdCpuSmmStackGuard enabled/disabled
PcdCpuSmmProfileEnable enabled/disabled
PcdCpuSmmStaticPageTable enabled/disabled
CET exception test:
#CF generated with PcdCpuSmmStackGuard enabled/disabled.
Other exception test:
#PF for normal stack overflow
#PF for NX protection
#PF for RO protection
CET env test:
Launch SMM in CET enabled/disabled environment (DXE) - no impact to DXE
The test case can be found at
https://github.com/jyao1/SecurityEx/tree/master/ControlFlowPkg
2) test ovmf (both IA32 and X64 SMM, CET disabled only)
test OvmfIa32/Ovmf3264, with -D SMM_REQUIRE.
qemu-system-x86_64.exe -machine q35,smm=on -smp 4
-serial file:serial.log
-drive if=pflash,format=raw,unit=0,file=OVMF_CODE.fd,readonly=on
-drive if=pflash,format=raw,unit=1,file=OVMF_VARS.fd
QEMU emulator version 3.1.0 (v3.1.0-11736-g7a30e7adb0-dirty)
3) not tested
IA32 CET enabled platform
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Fix CVE-2018-12178
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=809
The DNS driver only checks the received packet size against the
minimum DNS header size in DnsOnPacketReceived(), later it accesses
the QueryName and QuerySection beyond the header scope, which might
cause the pointer within DNS driver points to an invalid entry or
modifies the memory content beyond the header scope.
This patch is to fix above problem.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wang Fan <fan.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1134
Originally, the block size of created Ram disks is hard-coded to 512
bytes. However, if the total size of the Ram disk is not a multiple of 512
bytes, there will be potential memory access issues when dealing with the
last block of the Ram disk.
This commit will adjust the block size of the Ram disks to ensure that the
total size is a multiple of the block size.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
According to ARM Generic Interrupt Controller Architecture
Specification, GIC architecture version 3.0 and version 4.0,
GICD_IROUTER<n> is a 64-bit register.
Fixed code to use 64 bit MMIO write operations so that the
Aff3 value (bits [39:32]) is written to GICD_IROUTER<n>.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reported-by: Carl van Schaik <carl@cog.systems>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
LibGetTime():
- Two variables were used for the epoch, where only one should have been [*].
- Also harmonize variable name to match the one used in LibSetTime.
LibSetTime():
- Address possible underflows if time is set to start of epoch.
- Ensure that time being read does actually match time that was manually
set (plus the time elapsed since), by subtracting number of seconds
since reset.
[*] This fixes a build breakage, since one of these variables was set but
never used, triggering a compiler diagnostic at some optimization levels.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Steps:
1. Download edk2 tree
2. Build BaseTools
3. Go to edk2\BaseTools\Scripts\PackageDocumentTools
to run packagedoc_cli.py
An error occurs if relative imports are used when running
a file alone
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
FirmwareVolume.UnDispatchedFfsDict is mutated during iteration,
convert the FirmwareVolume.UnDispatchedFfsDict.keys() to a new list
to resolve this problem.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The Eot will report error when python3 enabled.
We replaced sdict with collections.OrderedDict in python3
patch set, but the sdict implement "append" method which is not
implemented in collections.OrderedDict.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Minor updates to comments and typo fixes. Also removed
unused structure CM_ARM_CPU_INFO_LIST.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
According to ACPI 6.2 Specification - Errata A, 'One,
and only one, GIC distributor structure must be present
in the MADT for an ARM based system'. Therefore,
the GIC Distributor ID field in the ACPI MADT GICD
substructure can be set to zero and there is no need
for the Configuration Manager to provide this information.
Update the CM_ARM_GICD_INFO structure to remove the GicId
field. Similarly update the MADT Generator to set the GicId
field in the GICD substructure to zero.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The DBG2_DEBUG_PORT_DDI() macro supports adding only one
Generic Base Address Register. Therefore, removed the
superfluous parameter NumReg and updated the macro to
use DBG2_NUMBER_OF_GENERIC_ADDRESS_REGISTERS which has
a value 1.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
Added option for OEMs to provide OEM Table ID and
OEM Revision for ACPI tables.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
Renamed the enum EArmObjIdMapping to EArmObjIdMappingArray
and updated the IORT generator accordingly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
Updated the Protocols section to reflect the protocols
that are produced or consumed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
Add support for 16550 UART to ACPI SPCR table as it is a
supported UART type by HLOS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The EFI_RETURN_STATUS_EXTENDED_DATA feature from PI-1.7
(<https://mantis.uefi.org/mantis/view.php?id=1885>) enables platform code
to learn about boot option failures (loading and launching) via status
codes reported by the UEFI Boot Manager.
In commit 59541d4163, we removed all status code support from
ArmVirtPkg. Reenable that support now, minimally, just to the extent so we
can benefit from the PI-1.7 feature mentioned above:
(1) Include the ReportStatusCodeRouterRuntimeDxe driver.
This driver produces two protocols, EFI_STATUS_CODE_PROTOCOL and
EFI_RSC_HANDLER_PROTOCOL. The former allows DXE phase modules and
runtime modules to report (produce) status codes. The latter allows
the same types of modules to register callbacks for status code
handling (consumption).
(Handler registration occurs only at boot time. Status codes are
delivered to each handler at runtime as well, unless the handler is
unregistered at ExitBootServices().)
(2) Resolve ReportStatusCodeLib to a non-Null instance, for DXE_DRIVER
modules only. This way DXE_DRIVER modules that use the
REPORT_STATUS_CODE_EX() macro and friends will reach
EFI_STATUS_CODE_PROTOCOL from point (1).
(3) Set PcdReportStatusCodePropertyMask to 3 (the default value is 0).
This causes the REPORT_STATUS_CODE_EX() macro and friends to let
Progress Codes (bit#0) and Error Codes (bit#1) through to point (1).
Debug Codes (bit#2) are filtered out.
(4) Include no driver, for now, that registers any status code handler via
EFI_RSC_HANDLER_PROTOCOL, from point (1). Status codes that reach
ReportStatusCodeRouterRuntimeDxe will be thrown away.
(5) Modify only the ArmVirtQemu* platforms. A status code handler will
be added to "ArmVirtPkg/Library/PlatformBootManagerLib" in the next patch,
and this library instance is not consumed by ArmVirtXen.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1515418
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Introduce the Platform Boot Manager Print Status Code Library (for short,
PlatformBmPrintScLib) class for catching and printing the LoadImage() /
StartImage() preparations, and return statuses, that are reported by
UefiBootManagerLib.
In the primary library instance, catch only such status codes that
UefiBootManagerLib reports from the same module that contains
PlatformBmPrintScLib. The intent is to establish a reporting-printing
channel within BdsDxe, between UefiBootManagerLib and
PlatformBmPrintScLib. Ignore status codes originating elsewhence, e.g.
from UiApp's copy of UefiBootManagerLib.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1515418
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In the EFI_RETURN_STATUS_EXTENDED_DATA structure from PI-1.7, there may be
padding between the DataHeader and ReturnStatus members. The
REPORT_STATUS_CODE_EX() macro starts populating the structure immediately
after DataHeader, therefore the source data must provide for the padding.
Extract the BmReportLoadFailure() function from EfiBootManagerBoot(),
prepare a zero padding (if any) in a temporary
EFI_RETURN_STATUS_EXTENDED_DATA object, and fix the
REPORT_STATUS_CODE_EX() macro invocation.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Star Zeng <star.zeng@intel.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1539
Fixes: c2cf8720a5
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1474
Within UfsBlockIoPei, the current implementation of the Block IO(2)
services:
UfsBlockIoPeimGetMediaInfo
UfsBlockIoPeimReadBlocks
UfsBlockIoPeimGetMediaInfo2
UfsBlockIoPeimReadBlocks2
does not handle the input parameter 'DeviceIndex' properly.
According to both of the PI spec and the function description comments:
> DeviceIndex Specifies the block device to which the function wants
> to talk. ... This index is a number from one to
> NumberBlockDevices.
But current codes incorrectly treat the valid range of 'DeviceIndex' as 0
to (NumberBlockDevices - 1).
This commit is to address this issue.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
If the input parameter AsciiString length is greater
than 255, the GenFv will hang.
This patch is to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
If the WORKSPACE environment variable has been set,The variables that
control stable sorting will not be set.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
When define [DEPEX] in lib inf to build, it will fail and report"
gUefiOvmfPkgTokenSpaceGuid.test1 used in [Depex] section should be
used as FixedAtBuild type and VOID* datum type in the module."
But we define this PCD to FixedAtBuild type and VOID* datum type indeed.
DEC:
[PcdsFixedAtBuild]
gUefiOvmfPkgTokenSpaceGuid.test1 |
{GUID("4096267b-da0a-42eb-b5eb-fef31d207cb4")}|VOID*|0x3c
DSC:
add pcd under lib inf as below:
NULL|TestPkg/TestLib/TestLib.inf
<PcdsFixedAtBuild>
gUefiOvmfPkgTokenSpaceGuid.test1 | {GUID(gUefiOvmfPkgTokenSpaceGuid)}
Lib inf:(TestPkg/TestLib/TestLib.inf)
[Depex]
gUefiOvmfPkgTokenSpaceGuid.test1
[FixedPcd]
gUefiOvmfPkgTokenSpaceGuid.test1
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1544
1) The GenC tool does not include the constructor/destructor for
USER_DEFINED module. It should be included.
Only constructor/destructor with BASE type is included here.
The constructor/destructor with PEI/DXE/SMM type is still excluded
to keep original behavior.
2) The GenC tool includes the UnloadImage code for BASE module.
It should NOT be included.
3) The GenC tool uses EFI_STATUS and ASSERT_EFI_ERROR for BASE type.
It should use RETURN_STATUS and ASSERT_RETURN_ERROR.
4) The GenC tool miss DebugLib.h for BASE or USER_DEFINED module
AutoGen.c. Only Base.h is there. It should add Library/DebugLib.h.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1529
This commit will add the 'Security feature set' support for ATA devices.
According to the AT Attachment 8 - ATA/ATAPI Command Set (ATA8-ACS)
specification, the Security feature set is an optional feature. In
summary, the feature is a password system that restricts access to user
data stored on an ATA device. A more detailed introduction of this feature
can be referred from the ATA8-ACS spec.
The HddPassword driver is composed of 2 parts:
* A DXE driver and
* A PEI driver
The DXE driver consumes EFI_ATA_PASS_THRU_PROTOCOL instances and installs
an HII GUI to manage the devices. If the managing device supports Security
feature set, the HII page will provide the user with the ability to
set/update/disable the password for this device. Also, if a password is
being set via the Security feature set, a popup window will show during
boot requesting the user to input password.
Another feature supported by this driver is that for those managing
devices with password set, they will be automatically unlocked during the
S3 resume. This is done by the co-work of the DXE driver and the PEI
driver:
The DXE driver will save the password and the identification information
for these devices into a LockBox, which is only allowed to restore during
S3 resume.
The PEI driver, during S3 resume, will restore the content in the LockBox
and will consume EDKII_PEI_ATA_PASS_THRU_PPI instances to unlock devices.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
For the current implementation of OpalPassword drivers, it has a feature
to support devices being automatically unlocked in the S3 resume. For this
feature, two types of devices are supported:
* ATA hard disks working under AHCI mode
* NVM Express devices
The support of this feature requires the above 2 types of device to be
initialized at the PEI phase during S3 resume, which is done by the
co-work of the OpalPasswordDxe driver and the OpalPasswordPei driver.
More specifically, the OpalPasswordDxe will handle:
* Pre-allocate MMIO resource and save it in a driver internal LockBox for
OpalPasswordPei to retrieve;
* Save the PCI configuration space of ATA controllers into boot script.
Meanwhile, the OpalPasswordPei will handle:
* Rely on the boot script for the PCI configuration space program of ATA
controllers;
* Restore the driver internal LockBox to get the MMIO resource;
* Complete the PCI configuration space program for ATA and NVME
controllers;
* Initialize ATA and NVME controllers and devices.
This commit will remove these hardware initialization related codes from
the OpalPassword drivers. The hardware initialization will be covered by
PEI storage device drivers (e.g. NvmExpressPei & AhciPei in the
MdeModulePkg).
After such codes removal, the OpalPasswordDxe will only handle:
* Construct/update the S3StorageDeviceInitList LockBox with the managing
ATA and NVME devices.
And the OpalPasswordPei will only handle:
* Locate Storage Security Command PPI instances to perform the device
automatic unlock during the S3 resume.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The previous commit:
MdeModulePkg/SmmLockBoxLib: Support LockBox enlarge in UpdateLockBox()
adds the support to enlarge a LockBox when using the LockBoxLib API
UpdateLockBox().
This commit is to sync the API description comment of UpdateLockBox() with
its counterparts in MdeModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This commit is out of the scope for BZ-1409. It is a refinement for the
PEI library instance within SmmLockBoxLib.
For the below ASSERT statement within function RestoreLockBox():
Status = SmmCommunicationPpi->Communicate (
SmmCommunicationPpi,
&CommBuffer[0],
&CommSize
);
if (Status == EFI_NOT_STARTED) {
//
// Pei SMM communication not ready yet, so we access SMRAM directly
//
DEBUG ((DEBUG_INFO, "SmmLockBoxPeiLib Communicate - (%r)\n", Status));
Status = InternalRestoreLockBoxFromSmram (Guid, Buffer, Length);
LockBoxParameterRestore->Header.ReturnStatus = (UINT64)Status;
if (Length != NULL) {
LockBoxParameterRestore->Length = (UINT64)*Length;
}
}
ASSERT_EFI_ERROR (Status);
It is possible for previous codes to return an error status that is
possible for happen. One example is that, when the 'if' statement
'if (Status == EFI_NOT_STARTED) {' is entered, function
InternalRestoreLockBoxFromSmram() is possible to return 'BUFFER_TOO_SMALL'
if the caller of RestoreLockBox() provides a buffer that is too small to
hold the content of LockBox.
Thus, this commit will remove the ASSERT here.
Please note that the current implementation of RestoreLockBox() is
handling the above-mentioned error case properly, so no additional error
handling codes are needed here.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This commit is out of the scope for BZ-1409. It is a coding style
refinement for the SmmLockBoxLib.
More specifically, the commit will remove all the debug message display
level macros starting with 'EFI_D_' and replace them with macros starting
with 'DEBUG_'.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
This commit will add the AHCI mode ATA device support in the PEI phase.
More specifically, the newly add AhciPei driver will consume the ATA AHCI
host controller PPI for ATA controllers working under AHCI code within the
system. And then produces the below PPIs for each controller:
EDKII PEI ATA PassThru PPI
Storage Security Command PPI
Also, the driver will consume the S3StorageDeviceInitList LockBox in S3
phase. The purpose is to perform an on-demand (partial) ATA device
enumeration/initialization on each controller to benefit the S3 resume
performance.
The implementation of this driver is currently based on the below
specifications:
Serial ATA Revision 2.6
Serial ATA Advanced Host Controller Interface (AHCI) 1.3.1
AT Attachment with Packet Interface - 6 (ATA/ATAPI-6)
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
For the NvmExpressPei driver, this commit will update the driver to
consume the S3StorageDeviceInitList LockBox in S3 phase. The purpose is to
perform an on-demand (partial) NVM Express device
enumeration/initialization to benefit the S3 resume performance.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This commit is out of the scope for BZ-1409. The commit will remove the
call of RegisterForShadow() at the entry point of the driver. By doing so,
the driver is now possible to be executed without being re-loaded into
permanent memory.
Thus, this commit will update the NvmExpressPei driver to avoid updating
the content of a global variable.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
This commit will add the GUID definitions for LockBox which is used to
save a list of storage devices that need to get initialized during the S3
resume.
The content of the LockBox will be a DevicePath structure that contains
zero or more DevicePath instances. Each instance denotes a storage device
that needs to get initialized during the S3 resume.
The producers of the content of this LockBox will be drivers like
OpalPassword DXE driver. This kind of drivers requires some specific
storage devices to be initialized during the PEI phase of in S3 resume.
(For the OpalPassword case, it requires the managing devices to be
automatically unlocked during the S3 resume).
The attribute of the LockBox should be set to
LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY.
The consumers of the content of this LockBox will be PEI storage device
controller/bus drivers (e.g. NvmExpressPei) during S3 resume. This kind of
drivers can use the DevicePath instances stored in the LockBox to get a
list of devices that need to get initialized. In such way, an on-demand
(partial) device enumeration/initialization can be performed to benefit
the S3 resume performance.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@Intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
This commit will add the definitions for Storage Security Command (SSC)
PPI. This PPI will be be used to abstract mass storage devices to allow
code running in the PEI phase to send security protocol commands to mass
storage devices without specific knowledge of the type of device or
controller that manages the device.
More specifically, the PPI will provide services to:
* Get the number of mass storage devices managed by a instance of the SSC
PPI (by service 'GetNumberofDevices');
* Get the identification information (DevicePath) of a managing mass
storage devices (by service 'GetDevicePath');
* Send security protocol commands to mass storage devices (by services
'ReceiveData' and 'SendData').
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
This commit will add the definitions for EDKII PEI ATA PassThru PPI. This
PPI will provide services that allow ATA commands to be sent to ATA
devices attached to an ATA controller in the PEI phase.
More specifically, the PPI will provide services to:
* Send ATA commands to an ATA device (by service 'PassThru');
* Get the list of the attached ATA device on a controller (by services
'GetNextPort' and 'GetNextDevice');
* Get the identification information (DevicePath) of the underlying ATA
host controller (by service 'GetDevicePath').
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
This commit will add the definitions for ATA AHCI host controller PPI. The
purpose of the PPI in to provide:
* MMIO base address
* Controller identification information (DevicePath)
for ATA host controllers working under AHCI mode.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
I don't watch much my Linaro e-mail anymore. So update my e-mail address
from Linaro to the Arm one.
Contributed-under: Tianocore Contribution Agreement 1.1
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1020
The following Microcode payload format is define in SDM spec.
Payload: |MicrocodeHeader|MicrocodeBinary|ExtendedHeader|ExtendedTable|.
When we verify the CheckSum32 with ExtendedTable, we should use the fields
of ExtendedTable to replace corresponding fields in MicrocodeHeader,
and then calculate the CheckSum32 with MicrocodeHeader+MicrocodeBinary.
This patch already verified on ICL platform.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1511
Currently the TCG config setup form defaults the physical presence action to
PHYSICAL_PRESENCE_ENABLE, this prevents the action from being called. When a TPM
1.2 device is in Disabled and Activated state it is not possible to issue the
PHYSICAL_PRESENCE_ENABLE using the menu action.
By having the form default to PHYSICAL_PRESENCE_NO_ACTION, the user is now able
to select PHYSICAL_PRESENCE_ENABLE and toggle the TPM 1.2 device enable state.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Rodrigo Gonzalez del Cueto <rodrigo.gonzalez.del.cueto@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Defined 2 PCDs(Test4 & Test401) and 2 SKUs(DEFAULT & _),
then set "SKUID_Defines" to ALL, for FixedAtBuild
gEfiStructuredPcdPkgTokenSpaceGuid. Test401 in this case,
its value should get from "Default" SKU, not from "_" SKU,
but we does not set value in SKU "_" in dsc, so Test401
should only display the value get from dec.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
With Python3, the dict.value() method returns an iterator.
If a dictionary is updated while an iterator on its keys is used,
a RuntimeError is generated.
Converting the iterator to a list() forces a copy of the mutable
keys in an immutable list which can be safely iterated.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1520
To save the image size without the compression, more than
one drivers can be combined into single one. When more than
one drivers are combined, their depex will be AND together.
Below is the example to combine BootManagerPolicyDxe into
DriverHealthManagerDxe.
Besides this patch, BaseTools also needs to check the module
type and make sure all module type are same. Otherwise,
BaseTools will report the error.
DRIVER INF has the parameter ENTRY_POINT
LIBRARY INF has the parameter LIBRARY_CLASS
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
externals.txt is to refer to the binary Win32. It is not used any longer.
BuildNotes.txt is to freeze BaseTools python. It is not used any longer.
BinaryFiles.txt is to list the file in Bin directory. But, Bin dir is empty.
building-gcc.txt and gcc is for mingw-gcc. It is not used any longer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1533
When SecCore and PeiCore in different FV, current
implementation still assuming SecCore and PeiCore are in
the same FV.
To fix this issue 2 FVs will be input parameters for
FindAndReportEntryPoints () and SecCore and PeiCore will
be found in each FV and correct debug information will
be reported.
Test: Booted with internal platform successfully.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1537
Use 16-bit and 32-bit IO widths for SDMMC MMIO to prevent all register
accesses from being split up into 8-bit accesses.
The SDHCI specification states that the registers shall be accessible in
byte, word, and double word accesses. (SD Host Controller Simplified
Specification 4.20 Section 1.2)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1140
In eMMC HS400 switch sequence flow eMMC driver attempted
to execute SEND_STATUS just after switching bus timing to high
speed and before downgrading clock frequency to 52MHz. Since link
was at that time in incorrect state SEND_STATUS was failing which
made driver think switch to HS400 failed.
This change makes driver always change clock frequency after
switching bus timing and before executing SEND_STATUS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Albecki Mateusz <mateusz.albecki@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
For example, PCD gUefiOvmfPkgTokenSpaceGuid.Test001 datatype is Array:
TEST1[2]
and the filed TEST1UINT64ARRAY in TEST1 is also an array:
UINT64 TEST1UINT64ARRAY[2];
Then the following filed assignment in DSC will cause build failure.
gUefiOvmfPkgTokenSpaceGuid.Test001[0].TEST1UINT64ARRAY|{'A','B'}
The root cause is build tool generate incorrect PcdValueInit.c File.
This patch is going to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
If there are multiple sku used in a platform and
gEfiMdeModulePkgTokenSpaceGuid.PcdNvStoreDefaultValueBuffer PCD
is used, build will fail.
This is a regression issue introduced by the commit:
5695877ec8 which only update the
Vpd offset for default SKU but not other SKUs.
This patch is going to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In ParseDevPathValue, the binary data need to convert to string
for python3 and python2 compatiblity.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
MaxSizeUserSet is missing in Pcd deepcopy function.
This patch is to add it back to Pcd deepcopy function.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The IORT generator uses the configuration manager protocol
to obtain information about the PCI Root Complex, SMMU,
GIC ITS, Performance Monitoring counters etc. and generates
the IORT table.
The mappings between the components are represented using
tokens. The generator invokes the configuration manager
protocol interfaces and requests for objects referenced by
tokens to establish the link.
This table data is then used by the Table Manager to install
the IORT table.
The Table Manager then invokes the generator interface to free
any resources allocated by the IORT table generator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The MCFG generator uses the configuration manager protocol
to obtain the PCI Configuration space information from the
platform configuration manager and builds the MCFG table.
This table data is then used by the Table Manager to install
the MCFG table.
The Table Manager then invokes the generator interface to free
any resources allocated by the MCFG table generator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The DBG2 generator uses the configuration manager protocol
to obtain the debug serial port information from the platform
configuration manager. It then updates a template DBG2 table
structure. This table data is used by the Table Manager to
install the DBG2 table.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The SPCR generator uses the configuration manager protocol to
obtain the serial port information from the platform configuration
manager. It then updates a template SPCR table structure. This
table data is used by the Table Manager to install the SPCR table.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The GTDT generator uses the configuration manager protocol to
obtain information about the architectural and platform timers
available on the platform and generates the ACPI GTDT table.
This table data is then used by the Table Manager to install
the GTDT table.
The Table Manager then invokes the generator interface to free
any resources allocated by the GTDT table generator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The MADT generator uses the configuration manager protocol to
obtain information about the Arm interrupt controllers (GICC,
GICD, etc.) and generates the ACPI MADT table. This table data
is then used by the Table Manager to install the MADT table.
The Table Manager then invokes the generator interface to free
any resources allocated by the MADT table generator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The FADT generator collates the relevant information required
for generating a FADT table from configuration manager using
the configuration manager protocol. It then updates a template
FADT table structure. This table data is used by the Table
Manager to install the FADT table.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
A Raw generator is a simple generator. This generator provides
the ability to install a binary blob (that contains ACPI table
data) as an ACPI table. The binary blob could be pre-generated
ACPI table data or it may be the pre-compiled output from an
iAsl compiler for a DSDT or SSDT table.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The dynamic table manager implements the top level component
that drives the table generation and installation process.
It uses the configuration manager protocol to get the list
of tables to be installed from the configuration manager.
It iterates through the list of tables, requests the table
factories for corresponding generators and invokes the
generator interface to build the tables.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The dynamic table factory dxe implements the dynamic table
factory protocol. It also implements the ACPI, SMBIOS and
DT table factories. The table generators register themselves
with the respective table factories and the factories are
responsible for instantiating instances of the generators
to build the firmware tables.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This patch introduces the dynamic table factory protocol
that provides an interface to register and retrieve
registered generators.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
A helper library that implements common functionality
for use by table generators.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This patch defines a helper macro 'GET_OBJECT_LIST()' that
expands to a function that uses the configuration manager
protocol to retrieve configuration manager object(s).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
Introduce configuration manager protocol interface
that is used by the dynamic tables framework core
to communicate with configuration manager.
Configuration manager is a platform specific module
that implements the configuration manager protocol.
Table generators use this interface to retrieve the
hardware information from the configuration manager.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The dynamic tables frameworks core communicates with the
platform specific implementation using the configuration
manager protocol interface. The dynamic tables framework
core uses this interface to retrieve information required
for generating the firmware tables. This information is
represented in the form of objects, which are classified
as standard namespace objects, Arm namespace objects or
as Custom/OEM namespace objects.
The configuration manager objects provides a convenient
way for wrapping up the namespaces using a well defined
configuration manager object Id.
The configuration manager is a platform specific component
that collates the platform information required for generating
firmware tables and represents them as configuration manager
objects.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The dynamic tables frameworks core communicates with the
platform specific implementation using the configuration
manager protocol interface. The dynamic tables framework
core uses this interface to retrieve information required
for generating the firmware tables. This information is
represented in the form of objects, which are classified
as standard namespace objects, Arm namespace objects or
as Custom/OEM namespace objects.
This patch introduces the definitions for the Arm namespace
objects.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The dynamic tables frameworks core communicates with the
platform specific implementation using the configuration
manager protocol interface. The dynamic tables framework
core uses this interface to retrieve information required
for generating the firmware tables. This information is
represented in the form of objects, which are classified
as standard namespace objects, Arm namespace objects or
as Custom/OEM namespace objects.
This patch introduces the definitions for standard
namespace objects.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This patch introduces the interfaces and definitions for
implementing a Device Tree table generator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This patch introduces the required interfaces and definitions
for implementing a SMBIOS table generator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This patch introduces the required interfaces and definitions
for implementing an ACPI table generator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
A Table generator is a component that implements the logic
for building a firmware table. This is typically implemented
as a library and registers itself with a table factory.
Table generators are further classified based on type of table
it generates, a namespace that signifies if the implementation
is standard or an OEM specific implementation and a table Id.
This patch introduces the definitions used for describing a
table generator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The dynamic tables framework is designed to generate standardised
firmware tables that describe the hardware information at
run-time. A goal of standardised firmware is to have a common
firmware for a platform capable of booting both Windows and Linux
operating systems.
Traditionally the firmware tables are handcrafted using ACPI
Source Language (ASL), Table Definition Language (TDL) and
C-code. This approach can be error prone and involves time
consuming debugging.
In addition, it may be desirable to configure platform hardware
at runtime such as: configuring the number of cores available
for use by the OS, or turning SoC features ON or OFF.
This patch introduces Dynamic Tables Framework which also provides
mechanisms to reduce the amount of effort required in porting
firmware to new platforms. A more detailed description is in
the Readme.md file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The check for 1.[1-9][0-9].* was removed since qemu jumped to 2.0
after 1.7.
Changed 2.*.* to [2-9].*.* to match major releases 3 - 9.
Added [1-9][0-9]*.*.* to match major releses >= 10.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1481
Today's MtrrLib contains a bug, for example:
when the original cache setting is WB for [0xF_0000, 0xF_8000) and,
a new request to set [0xF_0000, 0xF_4000) to WP,
the cache setting for [0xF_4000, 0xF_8000) is reset to UC.
The reason is when MtrrLibSetBelow1MBMemoryAttribute() is called the
WorkingFixedSettings doesn't contain the actual MSR value stored in
hardware, but when writing the fixed MTRRs, the code logic assumes
WorkingFixedSettings contains the actual MSR value.
The new fix is to change MtrrLibSetBelow1MBMemoryAttribute() to
calculate the correct ClearMasks[] and OrMasks[], and use them
directly when writing the fixed MTRRs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1114
V2: simplify the code logic.
update
if (!mHaveExitedBootServices &&
(StatusCodeData != (EFI_STATUS_CODE_DATA *) StatusCodeBuffer)) {
gBS->FreePool (StatusCodeData);
}
to
if (StatusCodeData != (EFI_STATUS_CODE_DATA *) StatusCodeBuffer) {
gBS->FreePool (StatusCodeData);
}
V3:
And the code below into the else condition (stack buffer is not enough)
in /DxeReportStatusCodeLib/ReportStatusCodeLib.c
if (gBS == NULL || gBS->AllocatePool == NULL || gBS->FreePool == NULL) {
return EFI_UNSUPPORTED;
}
V4:
Refine code logic.
When report status code with ExtendedData data,
and the extended data can fit in the local static buffer,
there is no need to use AllocatePool to hold the ExtendedData data.
This patch is just to do the enhancement to avoid using AllocatePool.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
If use a structure pcd in fdf, build tool crash
This is a regression issue introduced by py3 patch set.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Generate report fail when -Y EXECUTION_ORDER in build command.
This patch is going to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This is designed to be used on platforms where a a real RTC is not
available and relies on an RtcEpochSeconds variable having been set or,
if that is not the case, falls back to using the epoch embedded at
compilation time.
Note that, in order to keep things simple for the setting of the
compilation time variable, only GCC environments with UNIX-like shells
and where a 'date' command is available are meant to be supported for
now.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1505
When a device under PPB contains option ROM but doesn't require 32bit
MMIO, ProgrameUpstreamBridgeForRom() cannot correctly restore the
PPB MEM32 RANGE BAR. It causes the 32bit MMIO conflict which may
cause system hangs in boot.
The root cause is when ProgrameUpstreamBridgeForRom() calls
ProgramPpbApperture() to restore the PPB MEM32 RANGE BAR, the
ProgramPpbApperture() skips to program the BAR when the resource
length is 0.
This patch fixes this issue by not calling ProgramPpbApperture().
Instead, it directly programs the PPB MEM32 RANGE BAR.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Per PCI Spec, the option ROM BAR is 32bit so the maximum option ROM
size can be hold by UINT32 type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
This issue is caused by FileInfoBuffer variable. This is a pointer array
and each elements also pointer to a memory buffer that is allocated and
returned by AllocateCopyPool function.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x {Xen} x {DEBUG,NOOPT,RELEASE} x {feat-1}
(6 builds in total), PcdOptionRomImageVerificationPolicy,
PcdFixedMediaImageVerificationPolicy, and
PcdRemovableMediaImageVerificationPolicy are not used in any of those
builds.
Restrict the settings to the ArmVirtQemu and ArmVirtQemuKernel platforms
(preserving the -D SECURE_BOOT_ENABLE restriction in the process).
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x {Xen} x {DEBUG,NOOPT,RELEASE} x {feat-0,feat-1}
(12 builds in total), the PCD is not used in any of those builds. Restrict
the setting to the ArmVirtQemu and ArmVirtQemuKernel platforms.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x {Xen} x {DEBUG,NOOPT,RELEASE} x {feat-0,feat-1}
(12 builds in total), the PCD is not used in any of those builds. Remove
the setting.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x {Xen} x {DEBUG,NOOPT,RELEASE} x {feat-0,feat-1}
(12 builds in total), the PCD is not used in any of those builds.
Restrict the setting to the ArmVirtQemu and ArmVirtQemuKernel platforms.
Restrict the TTY_TERMINAL define similarly.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x {Xen} x {DEBUG,NOOPT,RELEASE} x {feat-0,feat-1}
(12 builds in total), the PCD is not used in any of those builds. Remove
the setting.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x {Qemu,QemuKernel,Xen} x {RELEASE} x {feat-0,feat-1}
(12 builds in total), the PCD is not used in any of those builds. Restrict
the PCD setting to ($(TARGET) != RELEASE).
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x {Qemu,QemuKernel,Xen} x {RELEASE} x {feat-0,feat-1}
(12 builds in total), the PCD is not used in any of those builds.
Rather than just restrict the PCD setting to ($(TARGET) != RELEASE),
remove the setting completely. The current value is identical to the 0xAF
default in "MdePkg/MdePkg.dec", which recognizes Andrew Fish, and so it's
unlikely to ever change.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x
{Qemu,QemuKernel,Xen} x
{DEBUG,NOOPT,RELEASE} x
{feat-0,feat-1}
(36 builds in total), the PCD is not used in any of those builds. Remove
the setting.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The PcdCoreCount dependency in the "ArmVirtPrePiUniCoreRelocatable.inf"
file is false; the module doesn't consume the PCD. Clean up the INF.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x
{QemuKernel,Xen} x
{DEBUG,NOOPT,RELEASE} x
{feat-0,feat-1}
(24 builds in total), the PCD is not used in any of those builds.
Move the setting from "ArmVirt.dsc.inc" to "ArmVirtQemu.dsc", to reflect
reality.
We originally moved the PCD setting in the opposite direction in commit
8aab575c26 ("ArmVirtPkg: enable non-executable DXE stack for all
platforms", 2017-03-07), generalizing it. However, as the comment itself
states, and according to all 36 ArmVirt build reports:
{AARCH64,ARM} x
{Qemu,QemuKernel,Xen} x
{DEBUG,NOOPT,RELEASE} x
{feat-0,feat-1}
the PCD is only consumed by "MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf", and
that module is only included in the ArmVirtQemu platform.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x
{Qemu,QemuKernel,Xen} x
{DEBUG,NOOPT,RELEASE} x
{feat-0,feat-1}
(36 builds in total), the PCD is not used in any of those builds. Remove
the setting.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x
{Qemu,QemuKernel} x
{DEBUG,NOOPT,RELEASE} x
{feat-0,feat-1}
(24 builds in total), the PCD is not used in any of those builds. Remove
the setting.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x
{Qemu,QemuKernel,Xen} x
{DEBUG,NOOPT,RELEASE} x
{feat-0,feat-1}
(36 builds in total), the PCD is not used in any of those builds. Remove
the setting.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x {QemuKernel} x {DEBUG,NOOPT,RELEASE} x {feat-0,feat-1}
(12 builds in total), the PCD is not used in any of those builds. Remove
the setting.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1408
According to the information of the above BZ-1408 and other platform
owners, NVM Express devices are becoming more likely to be a critical
part during the boot process.
This commit will add the calls to 'REPORT_STATUS_CODE' when there is a
failure happens during the NVM Express controller/device initialization
process.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <brbarkel@microsoft.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Replace the dummy C implementation of SpeculationBarrier() with
implementations consisting of the recommended DSB SY + ISB sequence,
as recommended by ARM in the whitepaper "Cache Speculation Side-channels"
version 2.4, dated October 2018.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Fix various typos in CorebootModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Coeur <coeur@gmx.fr>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
Fix various typos in CorebootPayloadPkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Coeur <coeur@gmx.fr>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
This patch adds the TCG2 Configuration menu to the Device Manager
menu. We can apparently reuse the sample Tcg2ConfigDxe from
SecurityPkg/Tcg/Tcg2Config without obvious adverse effects. The
added TCG2 Configuration menu now shows details about the attached
TPM 2.0 and lets one for example configure the active PCR banks
or issue commands, among other things.
The code is added to Ovmf by building with -DTPM2_ENABLE and
-DTPM2_CONFIG_ENABLE.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
With Python3, the dict.value() method returns an iterator.
If a dictionary is updated while an iterator on its keys is used,
a RuntimeError is generated.
Converting the iterator to a list() forces a copy of the mutable
keys in an immutable list which can be safely iterated.
Commit f8d11e5a4a converted various uses but missed one:
When specifying multiple BUILDTARGET, the first target builds
successfully, but then the PGen.BuildDatabase._CACHE_ dictionary is
updated, and accessing the next target triggers a RuntimeError.
Convert this iterator to an immutable list, to solve this build error:
$ build -a IA32 -t GCC5 -b RELEASE -b NOOPT -p OvmfPkg/OvmfPkgIa32.dsc
[...]
Processing meta-data ...
build.py...
: error C0DE: Unknown fatal error when processing [OvmfPkg/OvmfPkgIa32.dsc]
(Please send email to edk2-devel@lists.01.org for help, attaching following call stack trace!)
(Python 3.5.3 on linux) Traceback (most recent call last):
File "BaseTools/BinWrappers/PosixLike/../../Source/Python/build/build.py", line 2387, in Main
MyBuild.Launch()
File "BaseTools/BinWrappers/PosixLike/../../Source/Python/build/build.py", line 2141, in Launch
self._MultiThreadBuildPlatform()
File "BaseTools/BinWrappers/PosixLike/../../Source/Python/build/build.py", line 1921, in _MultiThreadBuildPlatform
self.Progress
File "BaseTools/Source/Python/AutoGen/AutoGen.py", line 304, in __init__
self._InitWorker(Workspace, MetaFile, Target, Toolchain, Arch, *args, **kwargs)
File "BaseTools/Source/Python/AutoGen/AutoGen.py", line 477, in _InitWorker
for BuildData in PGen.BuildDatabase._CACHE_.values():
RuntimeError: dictionary changed size during iteration
Note: The culprit commit (f8d11e5a4a) can not be found with bisection.
In 9c2d68c0a2 the build tools default to the python version provided
by the ${PYTHON} environment variable, however the Python3 transition is
not functional before d943b0c339. f8d11e5a4a falls between the
previous two.
Reported-by: Leif Lindholm <leif.lindholm@linaro.org>
Fixes: f8d11e5a4a
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The goal of commit 97c8f5b9e7 ("BaseTools:StructurePCD value display
incorrect in "Not used" section.", 2019-02-02) was to display the full
contents of such structure PCDs in the build report that were set in the
platform DSC or the FDF, but not used in any module INFs. The listings
would appear in the
PCDs not used by modules or in conditional directives
section of the build report.
Commit 97c8f5b9e7 assumed that any (platform, architecture) combination
would have a (possibly empty) set of structure PCD (and so the set of the
structure PCDs could be filtered for set-but-unused ones).
This is not the case: in "DscBuildData.py", in method
UpdateStructuredPcds(), if "S_pcd_set" remains an empty OrderedDict(),
then it is not added to "GlobalData.gStructurePcd" *at all*, for the
current (platform, architecture) combination.
As a result, when the PCD report tries to fetch the set of structure PCDs
for the current (platform, architecture), "GlobalData.gStructurePcd" does
not return an empty OrderedDict(); instead, it raises a KeyError. Fix it
by defaulting to an empty OrderedDict(), with the get() method.
Reported-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1513
Fixes: 97c8f5b9e7
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
This package is used by several platforms in edk2-platforms, so ensure it
can be built directly by adding AARCH64/ARM to SUPPORTED_ARCHITECTURES.
Also force-include CompilerIntrinsicsLib, BaseStackCheckLib and create a
resolution for ArmSoftFloatLib for ARM.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: jiewen.yao@intel.com
The CompilerIntrinsicsLib and BaseStackCheckLib need to be included in
order for an ARM build of the package .dsc to succeed - so add them.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: jiewen.yao@intel.com
Contrary to what the name suggests, some modules in this package are used
on other architecture. ARM is already listed in SUPPORTED_ARCHITECTURES
in the .dsc, but AARCH64 was never added - so do that.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Contrary to what the name suggests, some modules in this package are used
on other architecture. ARM is already listed in SUPPORTED_ARCHITECTURES
in the .dsc, but AARCH64 was never added.
Add that, and force inclusion of CompilerIntrinsicsLib and
BaseStackCheckLib for AARCH64/ARM to make the build successful.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The WebServer application is not meant to be Ia32/X64 specific, and would
build for other architectures, if it wasn't for the
#include <Register/Msr.h>
in WebServer.h. Move that statement to Mtrr.c instead, which is the only
consumer, and is already being filtered out for other architectures.
Cc: Daryl McDaniel <edk2-lists@mc2research.org>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
To avoid potential NULL pointer dereference issue. Initialize them at
the beginning of the function.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Uninitialized pointer variable may randomly point to a block of memory.
In This case, FreePool function will free a block of memory that is not
belongs to this function.
Cc: Ruiyu Ni <ray.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
StructurePCD value display incorrect in "Not used" section,
that the value defined in structure does not show.
StructurePCD will not display in "Not Used" section if
main structure not define in dsc and pcd not in inf
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Add a new type of exception for function body checkpoint.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hess.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Defined 2 PCDs(Test4 & Test401) and 2 SKUs(DEFAULT & _),
then set "SKUID_Defines" to ALL, for FixedAtBuild
gEfiStructuredPcdPkgTokenSpaceGuid. Test401 in this case,
its value should get from "Default" SKU, not from "_" SKU,
but we does not set value in SKU "_" in dsc, so Test401
should only display the value get from dec.
Missing the map() function causes SKU specific items to
not be deleted
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Update header file function name for FfsFindFileByName to match
implementation function name.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
v2:
The python files under CParser4 are generated by antlr4 and for
python3 usage. They have python3 specific syntax, for example
the data type declaration for the arguments of a function. That
is not compitable with python2. this patch is to remove these syntax.
Eot tool Python3 adaption.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
v2:
The python files under CParser4 are generated by antlr4 and for
python3 usage. They have python3 specific syntax, for example
the data type declaration for the arguments of a function. That
is not compitable with python2. this patch is to remove these syntax.
ECC tool Python3 adaption.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1493
Pkcs7GetAttachedContent() implementation in current CryptPkcs7Verify.c
is actually shared by RuntimeCryptLib.inf, SmmCryptLib.inf and
BaseCryptLib.inf, which are not correct since there's no use scenario
for runtime and AllocatePool() used in this method can only be called
in boot time.
This patch fix this issue by splitting file CryptPkcs7Verify.c into 3 parts.
CryptPkcs7VerifyCommon.c (shared among Base, SMM, Runtime)
CryptPkcs7VerifyBase.c (shared between Base, SMM)
CryptPkcs7VerifyRuntime.c (for Runtime only)
CryptPkcs7VerifyBase.c will have original implementation of
Pkcs7GetAttachedContent() as CryptPkcs7Verify.c. CryptPkcs7VerifyRuntime.c
provide a NULL version of Pkcs7GetAttachedContent().
No functionality and interface change is involved in this patch.
Cc: Ting Ye <ting.ye@intel.com>
Cc: Qin Long <qin.long@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ting Ye <ting.ye@intel.com>
Introduce two public functions CharToUpper and AsciiCharToUpper.
They have the same functions as InternalCharToUpper and
InternalBaseLibAsciiToUpper.Considering the internal functions will
be removed,so directly I change their function names to the public ones'.
https://bugzilla.tianocore.org/show_bug.cgi?id=1369
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1482
CapsuleApp is used for trigger capsule update.
Add -OD option in CapsuleApp to support doing capsule update via storage.
Add -F and -L options to support dumping information feature.
Finish unit test for -F and -L options.
Already verify this feature on Denlow platform, success to update capsule
via hard disk with -OD option.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
In some cases, such as MD RAID1 in Linux, the bootloader may be in a
nested EFI system partition partition. For example, sda1 and sdb1 are
combined as md0 and the first partition of md0, md0p1, is an EFI system
partition. Then, the bootloader can be located by the following device
paths:
PCI()/SATA(sda)/Partition(sda1)/Partition(md0p1)/File(bootloader.efi)
PCI()/SATA(sdb)/Partition(sdb1)/Partition(md0p1)/File(bootloader.efi)
To make the boot option more resilient, we may create a boot option with
the short-form device path like "Partition(md0p1)/File(bootloader.efi)".
However, BmMatchPartitionDevicePathNode() only matched the first
partition node and ignored the nested partitions, so the firmware would
refuse to load bootloader.efi since "Partition(md0p1)" doesn't match
either "Partition(sda1)" or "Partition(sda2)".
This commit modifies BmMatchPartitionDevicePathNode() to iterate all
nested partitions so that the above boot option could work.
v2 - Simplify the node matching logic
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Issue : SD read failure for high capacity cards e.g. 64 GB
Reason : Command argument value exceeds 32 bit for block number 0x3787FFF
and cant be fit into 32 bit wide SD host controller register.
Fix :
AccessMode bits [29:30] of OCR is a valid definition to calculate
data address for eMMC cards.
For SD cards, data address is calculated on the basis of
card capacity status bit[30] of OCR.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Currently, we always invalidate the TLBs entirely after making
any modification to the page tables. Now that we have introduced
strict memory permissions in quite a number of places, such
modifications occur much more often, and it is better for performance
to flush only those TLB entries that are actually affected by
the changes.
At the same time, relax some system wide data synchronization barriers
to non-shared. When running in UEFI, we don't share virtual address
translations with other masters, unless we are running under virt, but
in that case, the host will upgrade them as appropriate (by setting
an override at EL2)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1491
This patch is to update the data type of variable "Offset"
from UINT8 to UINT32 to fix following build issue.
...\Parsers\Pptt\PpttParser.c(193): error C2220:
warning treated as error - no 'object' file generated
...\Parsers\Pptt\PpttParser.c(193): warning C4244: '=':
conversion from 'UINT32' to 'UINT8', possible loss of data
Cc: Krzysztof Koch <krzysztof.koch@arm.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
ArmSetMemoryAttributes() still chokes in some cases, i.e., when the
length of the region exceeds 4 GB, the subtraction overflows, which
results in the region being misidentified as being 32-bit addressable.
Let's update the logic to trim the length to what we can address with
32 bits. This fixes the issue, and also deals with the issue where an
entire region is disregarded if part of it exceeds beyond what we can
map with 32 bits.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The newly added standalone MM versions of the FTW and variable runtime
drivers were included in MdeModulePkg.dsc to get test coverage when
building the package from its own .dsc, but the resulting modules are
non-functional since they incorporate some dummy libraries.
Dandan reports that these modules don't build cleanly when using the
EBC or XCODE5 compilers, so given the above, let's just ignore them
in this case.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bi Dandan <dandan.bi@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1485
Current FSP utilizes pre-allocated temporary memory from
boot loader for both heap and stack. To reduce overall
temporary memory usage FSP may share the same stack with
boot loader and only needs a smaller memory for heap,
no separate memory required for stack.
Setting PcdFspHeapSizePercentage to 0 to enable FSP sharing
stack with boot loader, in this case boot loader stack
has to be large enough for FSP to use. Default is 50
(half memory heap and half memory stack) for backward
compatible with original model.
Test: Verified on internal platform and booting successfully
with both modes.
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
delete the shared global variable from Common.Misc
delete the uncalled users of the variable from build.build
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Refactor to 'dict' from 'IterableUserDict' which was only required for old
python interpreter.
Sort imports according to PEP8
Remove those we dont need.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Added the acpiview parser for the PPTT table.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1323
Merge EmuVariable and Real variable driver.
CacheOffset could be removed in UpdateVariable() after
//
// update the memory copy of Flash region.
//
CopyMem (
(UINT8 *)mNvVariableCache + CacheOffset,
(UINT8 *)NextVariable, VarSize
);
is moved to be before mVariableModuleGlobal->NonVolatileLastVariableOffset
value is updated, like right before
mVariableModuleGlobal->NonVolatileLastVariableOffset +=
HEADER_ALIGN (VarSize);
Except for the movement above, the patch also capitalizes the first
character of "update the memory copy of Flash region".
This patch prepares for adding emulated variable NV mode
support in VariableRuntimeDxe.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Acked-by: Julien Grall <julien.grall@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1323
Merge EmuVariable and Real variable driver.
Add macro NV_STORAGE_VARIABLE_BASE.
Not get NV PCD in VariableWriteServiceInitialize, but in
FtwNotificationEvent/SmmFtwNotificationEvent, then
VariableWriteServiceInitialize could be not aware the NV
storage is real or emulated.
This patch prepares for adding emulated variable NV mode
support in VariableRuntimeDxe.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Acked-by: Julien Grall <julien.grall@arm.com>
ArmPkg/Include/IndustryStandard/ArmTrustZoneSmc.h contains definitions
contradicting the SMC Calling Convention (ARM DEN0028B).
It also has no users in public trees. So delete before it can cause
damage.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
TE images take up less space when using 4 KB section alignment, since
the FFS/FV generation code optimizes away the redundant, nested padding.
This saves 4 KB of space, which is a worthwhile improvement for code
that executes in place in secure context.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
The dispatcher uses the PE/COFF loader to load images into the heap,
but only does so after copying the entire image first, leading to
two copies being made for no good reason.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The special handling of the EFI_IMAGE_SUBSYSTEM_EFI_RUNTIME_DRIVER
attribute is only necessary for images that are relocated twice, i.e.,
in the context of SetVirtualAddressMap (). This does not apply to
standalone MM modules, so drop the check.
Drop some redundant DEBUG output while at it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
ASSERT_EFI_ERROR (x) is a shorthand for ASSERT(!EFI_ERROR(x)), and so
it should only be used with EFI_STATUS type expressions.
So drop two instances that operate on other types, since neither looks
particularly useful.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Remove MM_STANDALONE from the list of permitted modules for this library.
It should only be used by the standalone MM core.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jagadeesh Ujja <jagadeesh.ujja@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This MemoryAllocationLib code is based on the staging implementation of
StandaloneMmPkg, with the following changes:
- use correct MODULE_TYPE
- include MmServicesTableLib instead of declaring gMmst directly
- update code comments referring to the MM core
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jagadeesh Ujja <jagadeesh.ujja@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This HobLib code is based on the staging implementation of
StandaloneMmPkg, with the following changes:
- drop the unused AArch64/StandaloneMmCoreHobLibInternal.c source file
- remove hack from HobLibConstructor()
- update code comments referring the MM core
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jagadeesh Ujja <jagadeesh.ujja@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Add MM_STANDALONE to the list of module types that are permitted to
link to this library.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Permit CheckUefiLib to be used by MM_STANDALONE modules. Since this
library has a constructor, change the library's module type into
BASE so its constructor prototype is compatible with MM_STANDALONE
as well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Add MM_STANDALONE to the list of module types that are permitted to
link to this library. Also, since the constructor prototype is
different between MM_STANDALONE and DXE_DRIVER type libraries,
convert the library into BASE type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Permit SmmCryptLib to be used by MM_STANDALONE modules
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Move PackRegistryFormatGuid logic from Common.Misc to this file.
There were no other consumers of the function.
As it is one line, just replace the logic without the separate function.
v2 - change to fix the import statement
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Move SplitOption and ConvertStringToByteArray from
Common.Misc to this file.
There were no other consumers of the functions.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Move IsFieldValuieAnArray from Common.Misc to this file.
There were no other consumers of the function.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Move ProtocolValue and PpiValue from Common.Misc to this file.
There were no other consumers of these 2 functions.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
In GenFds.py, Due to the second assignment, the value is wrong
Its value should a list, not a string.and this line is not required
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Move DataDump and DataRestore from Common.Misc to this file.
There were no other consumers of these 2 functions.
Import threading since that module is used in build.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
GenFdsCommand returned dictionary with elements that
are not compatible with GenFdsApi.
As a result the following options were not processed by GenFdsApi:
-v, -q, -d, --genfds-multi-thread, --ignore-sources
The issue is introduced by commit b3497bad12.
V2: Remove EFI_SOURCE references
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Felix Polyudov <felixp@ami.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Update _FixedPcdVoidTypeDict to FixedVoidTypePcds
'_FixedPcdVoidTypeDict' no longer exists because edk2 version (b23414f6).
'ModuleAutoGen' object has no attribute '_FixedPcdVoidTypeDict'.
Build fail when PCD use in the [DEPEX] section of INF files
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1426
When calculating the address of RelocBaseEnd,
the RelocBase address is ImageBase + RelocDir->VirtualAddress,
the size of RelocDir is RelocDir->Size.
So the RelocBaseEnd address is:
ImageBase + RelocDir->VirtualAddress + RelocDir->Size - 1
not
ImageBase + RelocDir->VirtualAddress + RelocDir->Size
This patch is to fix this issue when call PeCoffLoaderImageAddress
function to calculate the address of RelocBaseEnd.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1466
DEC file defines PCD default value and PCD supported type.
DSC can configure PCD type and value.
If the value is same to default value in DEC file,
DSC can only configure PCD type and leave empty for value.
This usage supports all type PCD except for DynamicHii type.
So, DynamicHii PCD should support this usage. Below is one example in DSC.
for example,
[PcdsDynamicHii.common.DEFAULT]
PcdPkgTokenSpaceGuid.PcdCName|L"VarName"|gVarGuid|0x00||NV,BS
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Commit 31f5388006 ("ArmPkg/DefaultExceptionHandlerLib: use console
if available") added calls to AsciiPrint() to the default exception
handler code, but the ARM version did not include UefiLib.h yet
(even though the .INF declares it unconditionally), resulting in
build breakage. So add the missing include.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The library's MODULE_TYPE and the module type restrictions it
defines are needlessly strict. Just change the library to BASE
type and drop the restrictions entirely. Also, drop a bogus
library dependency on DxeServicesLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Print the minimal 'exception occurred' message to the console as well
as to the serial port if the console is available. This makes such
messages visible on systems where the console is graphical and the
serial is not connected.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Drop the redundant BASE variant, which is no longer used anywhere
now that DebugAgentSymbolsBaseLib no longer incorporates a vector
table and exception handling.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Drop the reference to ArmPkg/DefaultExceptionHandlerLibBase, which
is no longer used anywhere now that DebugAgentSymbolsBaseLib no
longer incorporates a vector table and exception handling.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Declare that this library is only usable in the context of DXE core
or a DXE driver. Set the MODULE_TYPE to BASE: this only affects the
prototype of the constructor (if present) but doesn't actually
restrict the usage context otherwise.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
DebugAgentSymbolsBaseLib is an optional library that is in charge
of extracting debug headers from SEC and PEI_CORE images in memory
so the filename and the offset in memory can be reported via the
UART, allowing a developer to load debugging symbols into his
debugger.
Interestingly enough, DebugAgentSymbolsBaseLib is also in charge of
exception handling before this duty is taken over by either the PEI
core, or the CPU DXE driver when running under PrePi.
Since exceptions are not actually handled at all on AArch64, and simply
routed to the DefaultExceptionHandlerLib (for which a special version
has been created to be usable this early), let's get rid of this
dubious functionality altogether.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
For build testing coverage, add the newly introduced MM_STANDALONE
versions of the fault tolerant write (FTW) and variable runtime
driver to MdeModulePkg.dsc. Note that the resulting binaries will
not be able to run, since they rely on dummy implementations of
MemoryAllocationLib and HobLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>.
Add MM_STANDALONE to the list of permitted module types of the
VarCheckLib library implementation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>.
Add MM_STANDALONE to the list of permitted module types of the
AuthVariableLibNull library implementation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>.
MdeModulePkg/Universal/DebugSupportDxe/DebugSupportDxe.inf does not
build for AARCH64 since it does not provide the needed PlDebugSupport.h
header. So move the module to a x86 only section.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>.
In order to permit MM_STANDALONE modules to be built without relying
on StandaloneMmPkg, provide a BASE type NULL implementation of
MemoryAllocationLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>.
In order to permit MM_STANDALONE modules to be built without relying
on StandaloneMmPkg, provide a BASE type NULL implementation of HobLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>.
The newly introduced generic MmServicesTableLib can be implemented
for traditional SMM (as we did already), but MM_STANDALONE drivers
require an implementation that is based on standalone MM.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reuse most of the existing code to implement a variable runtime
driver that will be able to execute in the context of standalone
MM.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In preparation of providing a standalone MM based variable runtime
driver, move the existing SMM driver to the new MM services table,
and factor out some pieces that are specific to the traditional
driver, mainly related to the use of UEFI boot services, which are
not accessible to standalone MM drivers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Implement a new version of the fault tolerant write driver that can
be used in the context of a standalone MM implementation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In preparation of providing a standalone MM based FTW driver, move
the existing SMM driver to the new MM services table, and factor out
some pieces that are specific to the traditional driver, mainly
related to the use of UEFI boot services, which are not accessible
to standalone MM drivers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The SMM based FTW and variable drivers are going to depend on
MmServicesTableLib after a subsequent patch, so add a resolution
for it to various Vlv2TbltDevicePkg .dsc files.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
The SMM based FTW and variable drivers are going to depend on
MmServicesTableLib after a subsequent patch, so add a resolution
for it to various QuarkPlatformPkg .dsc files.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The SMM based FTW and variable drivers are going to depend on
MmServicesTableLib after a subsequent patch, so add a resolution
for it to various OvmfPkg .dsc files.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
The SMM based FTW and variable drivers are going to depend on
MmServicesTableLib after a subsequent patch, so add a resolution
for it to MdeModulePkg.dsc.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1426
V2:
(1) Add NULL pointer check for the input parameters
(2) Add check for the "Adjust" value before applying fix ups.
In function PeCoffLoaderRelocateImageForRuntime, it doesn't
do much check when do relocation. For API level consideration,
it's not safe enough.
So this patch is to replace the same code logic with function
PeCoffLoaderImageAddress which will cover more validation.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
XCODE5 reports warning "equality comparison with extraneous parentheses".
Remove extraneous parentheses around the comparison to silence this warning.
This issue is caused by commit 8daa4278e8.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Feng Bob C <bob.c.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Warning message is that "equality comparison with extraneous parentheses"
Remove extraneous parentheses around the comparison to silence this warning.
This issue is caused by commit 8daa4278e8.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Feng Bob C <bob.c.feng@intel.com>
Reviewed-by: Feng Bob C <bob.c.feng@intel.com>
In AcquireSpinLock function, it may call GetPerformanceCounter which
final calls PeiService table. This code may also been used by AP but
AP should not calls PeiService. This patch update code to avoid use
AcquireSpinLock function.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1411
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
((Facs->Flags & EFI_ACPI_4_0_OSPM_64BIT_WAKE__F) != 0))
In above code, Facs->OspmFlags should be used instead.
EFI_ACPI_4_0_OSPM_64BIT_WAKE__F is a bit in OSPM Enabled Firmware
Control Structure Flags field, not in Firmware Control Structure
Feature Flags.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1430
Cc: Aleksiy <oleksiyy@ami.com>
Cc: Jian Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
((Facs->Flags & EFI_ACPI_4_0_OSPM_64BIT_WAKE__F) != 0))
In above code, Facs->OspmFlags should be used instead.
EFI_ACPI_4_0_OSPM_64BIT_WAKE__F is a bit in OSPM Enabled Firmware
Control Structure Flags field, not in Firmware Control Structure
Feature Flags.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1430
Cc: Aleksiy <oleksiyy@ami.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Take care not to dereference BlockEntry if it may be pointing past
the end of the page table we are manipulating. It is only a read,
and thus harmless, but HeapGuard triggers on it so let's fix it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Ignore calls to ArmSetMemoryAttributes () when the region described
is outside of the 32-bit addressable range. This memory is not
mapped in the first place, and the current code does not deal with
the high bits correctly, resulting in hangs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
GCC for 32-bit ARM chokes on .aslc files when running with LTO
enabled. Since LTO has no benefit whatsoever here, just disable
it globally for GCC5 and up when building .aslc files.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The definitions of the rebranded MM protocol stack were chosen such
that the existing SMM based core drivers can be reused. So let's
implement MmServicesTableLib based on gEfiMmBaseProtocolGuid, which
is simply gEfiSmmBase2ProtocolGuid under the hood.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
SMM has been rebranded as MM, and can be implemented in traditional
mode or standalone mode, using the same prototype for the services
table. Expose this table via MmServicesTableLib, permitting the
respective implementations to expose a traditional or standalone
version.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jagadeesh Ujja <jagadeesh.ujja@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V3:
Define union to specify the ppi or protocol.
V2:
1. Initialize CpuFeaturesData->MpService in CpuInitDataInitialize
and make this function been called at the begin of the
initialization.
2. let all other functions use CpuFeaturesData->MpService install
of locate the protocol itself.
V1:
GetProcessorIndex function calls GetMpPpi to get the MP Ppi.
Ap will calls GetProcessorIndex function which final let AP calls
PeiService.
This patch avoid GetProcessorIndex call PeiService.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1411
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1427
1. UserIdentifyManagerDxe is used to provide UserManagerProtocol.
2. UserProfileManagerDxe provides UI setting
3. PwdCredentialProviderDxe & UsbCredentialProviderDxe are implementation
examples.
Remove above features because of no platform use it.
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Zhang Chao B <chao.b.zhang@intel.com>
PopulateLevel2PageTable () is invoked for [parts of] mappings that
start or end on a non-1 MB aligned address (or both). The size of
the mapping depends on both the start address modulo 1 MB and the
length of the mapping, but the logic that calculates this size is
flawed: subtracting 'start address modulo 1 MB' could result in a
negative value for the remaining length, which is obviously wrong.
So instead, take either RemainLength, or the rest of the 1 MB
block, whichever is smaller.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Eugene Cohen <eugene@hp.com>
Commit 829633e3a8 ("ArmPkg/ArmMmuLib: Add new attribute
WRITE_BACK_NONSHAREABLE") introduced support for non-shareable
cached mappings to the AArch64 version of ArmMmuLib, but the ARM
version was left behind, so fix that.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Build tool do not support SET syntax in DSC.
If the SET statement is used in DSC, build tool just ignore it.
That behavior confused some users that
they think SET statement works in DSC like in FDF.
To avoid such confusion, build tool report ERROR
if there is "SET" statement in Dsc file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Cc: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1433
v2: Remove an unused variable.
Current logic of shell tftp download was writing file after tftp
download finished, when the file is large, it looks like the shell
tftp command hanged after download was finished. To improve
end-user experience, the solution is using split file writing
instead.
This patch update the code to open and close file inside
DownloadFile(), and save each packet to file within callback
function CheckPacket().
Since AllocatePage() is no-longer needed, This patch can also
remove the memory limitation. The download file can be larger
than system free memory now.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Songpeng Li <songpeng.li@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Provided functions in UEFILib that abstract driver model protocol
uninstallation. This helps drivers to install and uninstall protocols
using a library to keep things seemless.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1429
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1 - Some of these imports are cascaded from another file. Import them locally.
2 - Some of these imports are not used. Remove them.
3 - Some of these were missing the namespace used to import them.
These changes facilitate optimization of BaseTools:
https://bugzilla.tianocore.org/show_bug.cgi?id=42
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1415
When an integer constant specified in the .vfr file is
too large for the varstore field it is being used with,
the VFR compiler reports an overflow warning like this:
Test.vfr(693): WARNING: Overflow: Value 1024 is too large to
store in a UINT8
: String to UINT* Overflow
Since Warning does not break the build process,
and it is easy to miss it.
This patch is to update the code to report error and break
the build if meet this kind of issue.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
"tools_def.template" currently suggests, in the documentation of the
LzmaF86Compress utility, that said tool is generally unhelpful on binaries
built with the GCC44 toolchain, relative to LzmaCompress.
This statement doesn't apply to the GCC48 toolchain. I compressed 126
NOOPT_GCC48/IA32 unique EFI modules (built with gcc-4.8.5, as part of
OVMF) with both LzmaCompress and LzmaF86Compress. I repeated the same for
117 NOOPT_GCC48/X64 unique EFI modules. On average, the LzmaF86Compress
output size was 92.4% of the LzmaCompress output size in the IA32 case
(best relative compression: 86.01%, poorest relative compression: 97.47%
-- still a win). In the X64 case, the LzmaF86Compress output size was
92.95% of the LzmaCompress output size, on avarege (best relative
compression: 87.69%, poorest relative compression: 97.65% -- again, still
a win).
Given the consistent improvement from LzmaCompress to LzmaF86Compress,
remove the statement (rather than updating it to GCC48).
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The last patch decremented references on a number of DEFs. They can be
classified into three groups:
(a) those that remain used by multiple toolchains, or by multiple
definitions of a given toolchain (refcount >= 2):
- GCC_ASLCC_FLAGS
- GCC_ASLPP_FLAGS
- GCC_HOST_PREFIX
- GCC_IA32_RC_FLAGS
- GCC_PP_FLAGS
- GCC_VFRPP_FLAGS
- GCC_X64_RC_FLAGS
- IASL_FLAGS
- IASL_OUTFLAGS
- UNIX_IASL_BIN
- GCC44_IA32_X64_DLINK_FLAGS (!)
(b) those that are only used by GCC48 (refcount == 1):
- GCC44_ASM_FLAGS
- GCC44_IA32_CC_FLAGS
- GCC44_IA32_DLINK2_FLAGS
- GCC44_IA32_X64_ASLDLINK_FLAGS
- GCC44_X64_CC_FLAGS
- GCC44_X64_DLINK2_FLAGS
- GCC44_X64_DLINK_FLAGS
(c) those that are no longer used (refcount == 0):
- GCC44_IA32_PREFIX
- GCC44_X64_PREFIX
For the members of class (b), expand their definitions at the referring
sites, and remove their definitions.
For the members of class (c), remove their definitions.
(It's easier to review this patch with "git show --word-diff".)
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The last patch decremented references on a number of DEFs. They can be
classified into three groups:
(a) those that remain used by multiple toolchains (refcount >= 2):
- GCC_ASLCC_FLAGS
- GCC_ASLPP_FLAGS
- GCC_HOST_PREFIX
- GCC_IA32_RC_FLAGS
- GCC_PP_FLAGS
- GCC_VFRPP_FLAGS
- GCC_X64_RC_FLAGS
- IASL_FLAGS
- IASL_OUTFLAGS
- UNIX_IASL_BIN
(b) those that are only used by GCC48 (refcount == 1):
- GCC45_ASM_FLAGS
- GCC45_IA32_CC_FLAGS
- GCC45_IA32_DLINK2_FLAGS
- GCC45_IA32_X64_ASLDLINK_FLAGS
- GCC45_IA32_X64_DLINK_FLAGS
- GCC45_X64_CC_FLAGS
- GCC45_X64_DLINK2_FLAGS
- GCC45_X64_DLINK_FLAGS
(c) those that are no longer used (refcount == 0):
- GCC45_IA32_PREFIX
- GCC45_X64_PREFIX
For the members of class (b), expand their definitions at the referring
sites, and remove their definitions.
For the members of class (c), remove their definitions.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The last patch decremented references on a number of DEFs. They can be
classified into three groups:
(a) those that remain used by multiple toolchains (refcount >= 2):
- GCC_ASLCC_FLAGS
- GCC_ASLPP_FLAGS
- GCC_HOST_PREFIX
- GCC_IA32_RC_FLAGS
- GCC_PP_FLAGS
- GCC_VFRPP_FLAGS
- GCC_X64_RC_FLAGS
- IASL_FLAGS
- IASL_OUTFLAGS
- UNIX_IASL_BIN
(b) those that are only used by GCC48 (refcount == 1):
- GCC46_ASM_FLAGS
- GCC46_IA32_CC_FLAGS
- GCC46_IA32_DLINK2_FLAGS
- GCC46_IA32_X64_ASLDLINK_FLAGS
- GCC46_IA32_X64_DLINK_FLAGS
- GCC46_X64_CC_FLAGS
- GCC46_X64_DLINK2_FLAGS
- GCC46_X64_DLINK_FLAGS
(c) those that are no longer used (refcount == 0):
- GCC46_IA32_PREFIX
- GCC46_X64_PREFIX
For the members of class (b), expand their definitions at the referring
sites, and remove their definitions.
For the members of class (c), remove their definitions.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The last patch decremented references on a number of DEFs. They can be
classified into three groups:
(a) those that remain used by multiple toolchains (refcount >= 2):
- GCC_ASLCC_FLAGS
- GCC_ASLPP_FLAGS
- GCC_HOST_PREFIX
- GCC_IA32_RC_FLAGS
- GCC_PP_FLAGS
- GCC_VFRPP_FLAGS
- GCC_X64_RC_FLAGS
- IASL_FLAGS
- IASL_OUTFLAGS
- UNIX_IASL_BIN
(b) those that are only used by GCC48 (refcount == 1):
- GCC47_ASM_FLAGS
- GCC47_IA32_CC_FLAGS
- GCC47_IA32_DLINK2_FLAGS
- GCC47_IA32_X64_ASLDLINK_FLAGS
- GCC47_IA32_X64_DLINK_FLAGS
- GCC47_X64_CC_FLAGS
- GCC47_X64_DLINK2_FLAGS
- GCC47_X64_DLINK_FLAGS
(c) those that are no longer used (refcount == 0):
- GCC47_IA32_PREFIX
- GCC47_X64_PREFIX
For the members of class (b), expand their definitions at the referring
sites, and remove their definitions.
For the members of class (c), remove their definitions.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
DLINK_COMMON definitions are not consumed by "build_rule.template";
instead, DLINK_COMMON definitions (internal to "tools_def.template") were
invented for sharing options between ASLDLINK_FLAGS and DLINK_FLAGS.
However, this intent doesn't actually apply to
GCC48_IA32_X64_DLINK_COMMON: it is never consumed. Furthermore, the
GCC45..GCC47 instances of IA32_X64_DLINK_COMMON too lead up to
GCC48_IA32_X64_DLINK_COMMON only -- they form a dead-end. Remove them
altogether, in order to simplify the subsequent patches.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This drops ARM and AARCH64 support from the GCC46 and GCC47 toolchain
definitions, which are on the list to be removed, along with VS2003,
VS2005, VS2008, VS2010, DDK3790, UNIXGCC, GCC44, GCC45, ELFGCC, CYGGCC,
ICC, ICC11 and MYTOOLS.
Since GCC46 and GCC47 are the only ones on that list that support ARM
and/or AARCH64, let's give Liming a hand and cover the ARM side of
things first, so that everything that remains to be removed is x86
only.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
[lersek@redhat.com: add bugzilla reference and CCs]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
AuthVariableLib library can be used by MM_STANDALONE drivers as well.
So add MM_STANDALONE to the list of module types this library supports.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jagadeesh Ujja <jagadeesh.ujja@arm.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The standalone MM core is executed in place, and resides in a
separate execution context which may be space constrained.
Since code and data may be mapped with different attributes for
security reasons, the PE/COFF binary could have a section
alignment of 4 KB.
This means that any relocation data is not only useless, but it
will also take up 4 KB of valuable space.
So add support for the RELOCS_STRIPPED attribute on FFS files of
this type, so that we can get rid of the .reloc section altogether.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1410
BaseTools should not generate C structure array initial value
if the value is not specified with CODE style.
This patch is going to remove the incorrect initial value statement
and correct the Pcd Array value assignment statement.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch is going to fix the regression issue
by 72a1d77694
After enable PCD array, the Pcd.OverrideStruct has a new
key, array index, but the build report is not changed correspondingly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Addressed warnings and remarks reported by IASL.EXE. Some methods had
unused arguments. A method was returning a value when it should not.
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Rydman <thomas.j.rydman@intel.com>
Reviewed-by: Zhang Chao B <chao.b.zhang@intel.com>
Add SDMA, ADMA2 and 26b data length support.
If V4 64 bit address mode is supported in capabilities register,
program controller to enable V4 host mode and use appropriate
SDMA registers supporting 64 bit addresses.
If V4 64 bit address mode is supported in capabilities register,
program controller to enable V4 host mode and use appropriate
ADMA descriptors supporting 64 bit addresses.
If host controller version is above V4.0, enable ADMA2 with 26b data
length support for better performance. HC 2 register is configured to
use 26 bit data lengths and ADMA2 descriptors are configured appropriately.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1359
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Use __builtin_unreachable instead of infinite recursion to fix an
infinite recursion error when building StdLib with XCODE5/CLANG38.
Cc: Daryl McDaniel <edk2-lists@mc2research.org>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Alex James <theracermaster@gmail.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
According to the POSIX standard, cc_t, speed_t, and tcflag_t should be
unsigned integer types. Define cc_t as unsigned to match POSIX and fix
an implicit conversion error when building StdLib with XCODE5/CLANG38.
Cc: Daryl McDaniel <edk2-lists@mc2research.org>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Alex James <theracermaster@gmail.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1091
Previously, when compiling NASM source files, BaseTools did not support
including files outside of the NASM source file directory. As a result, we
duplicated multiple copies of "StuffRsb.inc" files in UefiCpuPkg. Those
INC files contain the common logic to stuff the Return Stack Buffer and
are identical.
After the fix of BZ 1085:
https://bugzilla.tianocore.org/show_bug.cgi?id=1085
The above support was introduced.
Thus, this commit will merge all the StuffRsb.inc files in UefiCpuPkg into
one file. The merged file will be named 'StuffRsbNasm.inc' and be placed
under folder UefiCpuPkg/Include/.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1418
This patch is going to fix a regression issue that is introduced
by commit b3497bad12.
Before commit b3497b, build launched a external GenFds.py to generate
Fd, so the global variable in GenFds.py was reset in each execution.
After commit b3497b, each GenFds run in the same python interpeter, so
we need to explicitly reset global variable in each GenFdsApi call.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1417
Since BaseLib API AsmLfence() is a x86 arch specific API and should be
avoided using in generic codes, this commit replaces the usage of
AsmLfence() with arch-generic API SpeculationBarrier().
Please note that speculation execution barriers are intended to be
asserted for SMM codes, hence, this commit still preserve an empty
implementation of the speculation execution barrier for the DXE codes.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1417
X86 specific BaseLib API AsmLfence() was introduced to address the Spectre
Variant 1 (CVE-2017-5753) issue. The purpose of this API is to insert
barriers to stop speculative execution. However, the API is highly
architecture (X86) specific, and thus should be avoided using across
generic code.
To address this issue, this patch will add a new BaseLib API called
SpeculationBarrier(). Different architectures will have different
implementations for this API.
For IA32 and x64, the implementation of SpeculationBarrier() will
directly call AsmLfence().
For ARM and AARCH64, this patch will add a temporary empty implementation
as a placeholder. We hope experts in ARM can help to contribute the actual
implementation.
For EBC, similar to the ARM and AARCH64 cases, a temporary empty
implementation is added.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The 'arm-linux-gnueabihf' target triplet we use for CLANG35 and
CLANG38 specifies a hardfloat target, and so the binaries that are
emitted are annotated as using VFP registers for passing floating
point arguments, even though no VFP is used anywhere in the code.
This works fine as long as we don't try to link against code
that uses software floating point, but combining object files
with different floating point calling conventions is not permitted.
So switch to the softfloat arm-linux-gnueabi triplet instead.
This affects both the name Clang uses when invoking the linker,
and the arguments it passes to it, and we are mostly interested
in the latter (since any version of GNU ld.bfd will do the right
thing as long as it targets EABI ARM)
For native builds, this change has no effect, since the unprefixed
system linker will take priority, and so Clang will pass the right
arguments to whichever linker happens to be the system linker.
For cross builds, the fact that Clang composes the name of the
linker by prefixing '-ld' with the target triplet implies that
users will have to switch to a version of binutils that targets
arm-linux-gnueabi rather than arm-linux-gnueabihf. Note that the
GCCx toolchain targets can use either when building for ARM so this
does not create a need to install two versions of the ARM cross
toolchain. Also, note that all ARM toolchains in the GCC family
are already documented as requiring a toolchain that targets
arm-linux-gnueabi and not arm-linux-gnueabihf.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Add function to allow enabling and disabling of the clock using the SCMI
interface. Add gArmScmiClock2ProtocolGuid to distinguish platforms that
support new API from those that just have the older protocol.
SCMI_CLOCK2_PROTOCOL also adds a version parameter to allow for future
changes. It is placed after the functions that are present in the
existing protocol to allow SCMI_CLOCK2_PROTOCOL to be cast to
SCMI_CLOCK_PROTOCOL so that only a single implementation of those
function are needed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Use an untyped PCD reference for PcdSerialRegisterBase, so that the
library gets built without hardcoded values, permitting modules to
override the default serial port. This allows SerialDxe to use a
different serial port from the one used for DEBUG output (which
often gets occluded due to the console driver clearing the screen).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Even though UEFI does not appear to use it, let's implement the
complete PI watchdog protocol, including handler registration,
which will be invoked before the ResetSystem() runtime service
when the watchdog timer expires.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Clean up the code, by adding missing STATIC modifiers, drop
redundant casts, and get rid of the 'success handling' anti
pattern in the entry point code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The SP805 watchdog driver doesn't implement the PI watchdog protocol
fully, but always simply resets the system if the watchdog time runs
out.
However, the hardware does support the intended usage model, as long
as the SP805 is wired up correctly. So let's implement interrupt based
mode involving a handler that is registered by the DXE core and invoked
when the watchdog runs out. In the interrupt handler, we invoke the
notify function if one was registered, before calling the ResetSystem()
runtime service (as per the UEFI spec)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Before fixing the SP805 driver, let's clean it up a bit. No
functional changes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Instead of #defining MAX_ALLOC_ADDRESS to MAX_ADDRESS as intended,
it is #defined to itself, causing all ARM builds to break.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The current ArmVirtMemoryInitPeiLib code splits the memory region passed
via PcdSystemMemoryBase/PcdSystemMemorySize in two if the region extends
beyond the MAX_ADDRESS limit. This was introduced for 32-bit ARM, which
may support more than 4 GB of physical address space, but cannot address
all of it via a 1:1 mapping, and a single region that is not mappable
in its entirety is unusable by the PEI core.
AArch64 is in a similar situation now: platforms may support more than
256 TB of physical address space, but only 256 TB is addressable by the
CPU, and so a memory region that extends from below this limit to above
it should be split.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Limit the PEI memory region so it will not extend beyond what we can
address architecturally when running with 4 KB pages.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
When creating the page tables for the 1:1 mapping, ensure that we don't
attempt to map more than what is architecturally permitted when running
with 4 KB pages, which is 48 bits of VA. This will be reflected in the
value of MAX_ALLOC_ADDRESS once we override it for AArch64, so use that
macro instead of MAX_ADDRESS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Take MAX_ALLOC_ADDRESS into account in the implementation of the
page allocation routines, so that they will only return memory
that is addressable by the CPU at boot time, even if more memory
is available in the GCD memory map.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Update the GCD memory map initialization code so it disregards
memory that is not addressable by the CPU at boot time. This
only affects the first memory descriptor that is added, other
memory descriptors are permitted that describe memory ranges
that may be accessible to the CPU itself only when executing
under the OS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
On some architectures, the maximum representable address deviates from
the virtual address range that is accessible by the firmware at boot
time. For instance, on AArch64, UEFI mandates a 4 KB page size, which
limits the address space to 48 bits, while more than that may be
populated on a particular platform, for use by the OS.
So introduce a new macro MAX_ALLOC_ADDRESS, which represent the maximum
address the firmware should take into account when allocating memory
ranges that need to be accessible by the CPU at boot time.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Ensure that we prevent the CPU from proceeding after having taken an
unhandled exception on a RELEASE build, which does not contain the
ASSERT() which ensures this on DEBUG and NOOPT builds.
Retain the code following the deadloop so that we can keep going when
running in a debugger.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The ARM linker may emit veneers, i.e., trampolines, when ordinary
direct relative branches cannot be used, e.g., for Thumb interworking
or branch targets that are out of range.
Usually, such veneers carry an absolute reference to the branch
target, which is problematic for us, since these absolute references
are not covered by annotations that are visible to GenFw in the
PE/COFF conversion, and so these absolute references are not fixed
up by the PE/COFF loader at runtime.
So switch to all ARM GNU ld toolchains to position independent veneers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The GdbDebugAgent library is unused and unmaintained, and now it
turns out it doesn't build with Clang, so let's just get rid of it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The following Pcds
- gArmTokenSpaceGuid.PcdArmLinuxSpinTable
- gArmTokenSpaceGuid.PcdArmLinuxAtagMaxOffset
- gArmTokenSpaceGuid.PcdArmLinuxFdtMaxOffset
- gArmTokenSpaceGuid.PcdArmLinuxFdtAlignment
remained defined, without actual users.
So get rid of them.
One reference to be deleted separately from edk2-platforms.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fix a bug because of b3497bad12.
Before the patch, when GenFds fail, the build continue and return success.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1405
Background as below.
Problem:
As static configuration from the PCDs, the binary PeiCore (for example
in FSP binary with dispatch mode) could not predict how many FVs,
Files or PPIs for different platforms.
Burden:
Platform developers need configure the PCDs accordingly for different
platforms.
To solve the problem and remove the burden, we can update code to
remove the using of PcdPeiCoreMaxFvSupported, PcdPeiCoreMaxPeimPerFv
and PcdPeiCoreMaxPpiSupported by extending buffer dynamically for FV,
File and PPI management.
This patch removes the using of PcdPeiCoreMaxPpiSupported in PeiCore.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1405
Background as below.
Problem:
As static configuration from the PCDs, the binary PeiCore (for example
in FSP binary with dispatch mode) could not predict how many FVs,
Files or PPIs for different platforms.
Burden:
Platform developers need configure the PCDs accordingly for different
platforms.
To solve the problem and remove the burden, we can update PeiCore to
remove the using of PcdPeiCoreMaxFvSupported, PcdPeiCoreMaxPeimPerFv
and PcdPeiCoreMaxPpiSupported by extending buffer dynamically for FV,
File and PPI management.
This patch removes the using of PcdPeiCoreMaxFvSupported in PeiCore.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1405
Background as below.
Problem:
As static configuration from the PCDs, the binary PeiCore (for example
in FSP binary with dispatch mode) could not predict how many FVs,
Files or PPIs for different platforms.
Burden:
Platform developers need configure the PCDs accordingly for different
platforms.
To solve the problem and remove the burden, we can update PeiCore to
remove the using of PcdPeiCoreMaxFvSupported, PcdPeiCoreMaxPeimPerFv
and PcdPeiCoreMaxPpiSupported by extending buffer dynamically for FV,
File and PPI management.
This patch removes the using of PcdPeiCoreMaxFvSupported in Tcg(2)Pei.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1405
Background as below.
Problem:
As static configuration from the PCDs, the binary PeiCore (for example
in FSP binary with dispatch mode) could not predict how many FVs,
Files or PPIs for different platforms.
Burden:
Platform developers need configure the PCDs accordingly for different
platforms.
To solve the problem and remove the burden, we can update code to
remove the using of PcdPeiCoreMaxFvSupported, PcdPeiCoreMaxPeimPerFv
and PcdPeiCoreMaxPpiSupported by extending buffer dynamically for FV,
File and PPI management.
This patch removes the using of PcdPeiCoreMaxPeimPerFv in PeiCore.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
current edk2\BaseTools\Conf\build_rule.template, the compile of nasm
source files does not have the $(INC) support.
The '-I' option only includes the directory of the nasm source file
(${s_path}(+)). Hence, it will be impossible for nasm files to include
files outside of the nasm source file directory.
As a comparison, the compile of both .s and .asm have $(INC) support
in their compile commands.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=1085
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1390
1. support hex number for array index
2. support Non-Dynamic Pcd for array data type
3. support {} and {CODE()} for array data type
4. Change GetStructurePcdMaxSize to be a static function since it need to
be called in another static function. And this function does not depend on
it's class instance.
5. Add unittest for RemoveCComments function and
ArrayIndex regular expression.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Philippe Mathieu-Daud? <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Commit 9a67ba261f ("ArmVirtPkg: Replace obsoleted network drivers
from platform DSC/FDF") incorrectly added the BaseCryptLib, OpensslLib
and IntrinsicLib to "ArmVirtPkg/ArmVirtQemuKernel.dsc", it's redundant
and the library instances from "ArmVirt.dsc.inc" is already sufficient.
This patch also adjust the order of network drivers in "ArmVirtPkg/
ArmVirtQemuFvMain.fdf.inc" to make it same as the DSC file.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
UEFI SCT crashed and failed in NonDiscoverablePciDeviceDxe becase
required checks were not performed. Perform parameters validation in
NonDiscoverablePciDeviceDxe.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
Our default is already armv7-a, so no need to rewrite the PLATFORM_FLAGS
for that. Also, setting -mfpu=neon is not entirely inappropriate, since
NEON is not mandatory under v7.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Commit 9a67ba261f ("ArmVirtPkg: Replace obsoleted network drivers
from platform DSC/FDF") failed to take into account that the now
unconditionally included IScsiDxe.inf from NetworkPkg requires a
resolution for TcpIoLib. Since specifying such a resolution is harmless
for platforms that have no networking enabled, let's just fix things
by dropping the conditionals around it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This patch replaces the MdeModulePkg TCP, PXE and iSCSI driver with those
ones in NetworkPkg. These 3 drivers in MdeModulePkg are not being actively
maintained and will be removed from edk2 master soon.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Drop the -mno-movt command line option override, which is no longer
needed, and actually incompatible with versions of Clang before 3.6.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PE/COFF only has a very limited id space for runtime relocations, and
so it defines only a single relocation for movw/movt instruction pairs,
which can be combined to load a 32-bit symbol reference into a register.
For this to work as expected, these instructions must always appear in
the same order and adjacently, and this is something few compilers take
into account, unless they target PE/COFF explicitly (and this is not the
case for our ELF based toolchains)
For Clang 3.6 and later, we can pass the -mno-movt option to suppress
movw/movt pairs entirely, which works around the issue. Unfortunately,
for Clang 3.5, the option is called differently (-mllvm -arm-use-movt=0)
and mutually incompatible between 3.5 and 3.6.
Since it is desirable for the CLANG35 toolchain to be usable on newer
versions of Clang as well (given that it is the only non-LTO alternative
to CLANG38), let's work around this issue in a way that permits versions
3.5 and newer of Clang to be used with the CLANG35 profile.
So pass the -mkernel flag instead (and add -Qunused-argument so Clang
does not complain about the -mno-unaligned-access in ARM_CC_XIPFLAGS).
This also inhibits movw/movt generation, along with some other changes
(e.g., long calls) which do affect code generation but not in an
undesirable manner.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
ARM uses the low order bit of a branch target address to decide in
which execution mode (ARM or Thumb) a function needs to be called.
In order for this to work across object files, ELF function symbols
will have the low bit set if they were emitted in Thumb mode and
cleared otherwise. This annotation is only emitted if the ELF symbols
are annotated as function, since taking the address of some data
symbol (e.g., a literal) should not produce a value with the low bit
set, even if it appears in an object file containing Thumb code.
This means that all functions coded in assembler must have this
function annotation, or they may end up getting called in the
wrong mode, crashing the program.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
We currently permit R_ARM_GOT_PREL relocations in the ELF32 conversion
routines, under the assumption that relative relocations are fine as
long as the section layout is the same between ELF and PE/COFF.
However, as is the case with any proxy generating relocation, it is
up to the linker to emit an entry in the GOT table and populate it
with the correct absolute address, which should also be fixed up at
PE/COFF load time. Unfortunately, the relocations covering the GOT
section are not emitted into the static relocation sections processed
by GenFw, but only in the dynamic relocation section as a R_ARM_RELATIVE
relocation, and so GenFw fails to emit the correct PE/COFF relocation
data for GOT entries.
Since GOT indirection is pointless anyway for PE/COFF modules running
in UEFI context, let's just drop the references to R_ARM_GOT_PREL from
GenFw, resulting in a build time failure rather than a runtime failure
if such relocations do occur.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The self-relocating PrePi module that is used by the ArmVirtQemuKernel
and ArmVirtXen targets runs the linker in PIE mode so that it emits
dynamic relocations into the final image in a way that permits the
module to relocate itself into place before calling into the C code.
When building these targets using the CLANG38 toolchain, we switch
from the BFD to the GOLD linker, which behaves a bit differently when
building PIE executables, and insists on emitting GOT indirected symbol
references throughout, which means a) that we end up with absolute
addresses (which need to be fixed up at load time) for no good reason,
and b) we have to add support for handling GOT entries to GenFw if we
want to convert them into PE/COFF.
So instead, let's emit a shared library. Since the ELF image only serves
as the input to GenFw, this does not lead to any loss of functionality,
although it does require the -Bsymbolic linker option to be added to
ensure that no symbol based dynamic relocations are emitted (which
would, e.g., permit lazy binding for shared libraries). So for all
other toolchains, the linker option changes are a no-op.
Then, we have to convince CLANG38/GOLD that there is no need to refer
to symbols via a GOT entry. This is done by forcing hidden visibility
for all symbols in all components that make up the PrePi SEC module:
this informs the linker that a symbol is never exported or preempted,
making it safe to refer to it directly from anywhere in the code,
rather than indirectly via a GOT entry.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Move some PCD settings outs of the [PcdsFixedAtBuild.AARCH64] block,
so that they apply to 32-bit ARM as well. Without this change, the
ARM build doesn't work.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Since 4 KB section alignment is required when mapping PE/COFF images
with strict permissions, update the default section alignment when
using GCC49 and GCC5 in RELEASE mode. Note that XIP modules such as
SEC, PEIMs or PEI core are not affected by this change, since the
override to 32 byte aligment remains in effect.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Struct packing is only necessary for data structures whose in-memory
representation is covered by the PI or UEFI specs, and may deviate
from the ordinary C rules for alignment.
So in case of FileExplorerLib, this applies to the device path struct
only, and other structures used to carry program data should not be
packed, or we may end up with alignment faults on architectures such
as ARM, which don't permit load/store double or multiple instructions
to access memory locations that are not 32-bit aligned.
E.g., the following call in FileExplorerLibConstructor()
InitializeListHead (&gFileExplorerPrivate.FsOptionMenu->Head);
which is emitted as follows for 32-bit ARM/Thumb2 by Clang-5.0
3de0: b510 push {r4, lr}
3de2: 4604 mov r4, r0
...
3de8: e9c4 4400 strd r4, r4, [r4]
3dec: bd10 pop {r4, pc}
will perform a double-word store on the first argument, passed in
register r0, assuming that the pointer type of the argument is
enough to guarantee that the value is suitably aligned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1376
Today's implementation reuses the 32bit MMIO resource requested by
all PCI devices MMIO BARs when shadowing the option ROM.
Take a simple example, a system has only one PCI device. It requires
8MB 32bit MMIO and contains a 4MB option ROM. Today's implementation
only requests 8MB (max of 4M and 8M) 32bit MMIO from
PciHostBridgeResourceAllocation protocol. Let's assume the MMIO range
[3GB, 3GB+8MB) is allocated. The 3GB base address is firstly
programmed to the option ROM BAR for option ROM shadow. Then the
option ROM decoding is turned off and 3GB base address is programmed
to the 32bit MMIO BAR.
It doesn't cause issues when the device doesn't request too much
MMIO.
But when the device contains a 64bit MMIO BAR which requests 4GB MMIO
and a 4MB option ROM. Let's assume [3GB, 3GB+8MB) 32bit MMIO range is
allocated for the option ROM. When the option ROM is being shadowed,
64bit MMIO BAR is programmed to value 0, which means [0, 4GB) MMIO is
given to the 64bit BAR.
The range overlaps with the option ROM range which may cause the
device malfunction (e.g.: option ROM cannot be read out) when the
device has two separate decoders: one for MMIO BAR, the other for
option ROM.
The patch requests dedicated MEM32 resource for Option ROMs and
moves the Option ROM shadow logic after all MMIO BARs are programmed.
The MMIO BAR setting to 0 when shadowing Option ROM is also skipped
because the MMIO BAR already contains the correct value.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
The StandaloneMM image executes in S-EL0 on reference Arm platforms
and is deployed by the trusted firmware as BL32 image. Memory for the
Standalone MM drivers is marked as RW+XN initially, allowing the
drivers to be loaded into the memory. Once loaded, the memory
attributes need to be changed to RO+XN for rodata sections and RO+X
for code sections.
Achieve this through the extra action 'UpdatePeCoffPermissions' to
request the privileged firmware in EL3 to update the permissions.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
The MMU functions needed for StandaloneMM image are now exported
through a separate library class. Make the corresponding change in the
core's entry point inf file so that it references the correct library
class for modifying the MMU attributes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Introduction of the -mstrict-align flag results in GCC attempting
to use memset to zero out the InitMmFoundationSvcArgs structure.
In the absence of this C library function, this patch explicitly
zeroes this data structure prior to use.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
On AArch64, Standalone MM during the SEC phase runs in S-EL0 with
SCTLR_EL1.A=1. This patch adds the -mstrict-align compiler flag to
ensure that the generated code is compliant with the runtime
alignment checks.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
This patch fixes the dependency PL011UartLib has on PL011UartClockLib by
including its implementation path in the StandaloneMm DSC file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
This reverts commit 82379bf660.
On AArch64, we can only use 48 address bits while running in UEFI,
while the GCD and UEFI memory maps may describe up to 52 bits of
physical address space. For this reason, MAX_ADDRESS was reduced
to 48 bits, to ensure that the firmware does not inadvertently
attempt to allocate memory that we cannot access.
However, MAX_ADDRESS is used in runtime drivers as well, and
runtime drivers may deal with kernel virtual addresses, which have
bits [63:48] set. In fact, the OS may be running with 64 KB pages
and pass addresses into the runtime services that use up to 52
bits of address space, either with the top bits set or cleared,
even if the physical address space does not extend beyond 48 bits.
In summary, changing MAX_ADDRESS is a mistake, and needs to be
reverted.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1288
This patch is one of build tool performance improvement
series patches.
This patch is going to customize the deepcopy function for
SkuClass, PcdClassObject and python dictionary.
python deepcopy copy everything of a object, but for our current
usage we just need to copy the data we care about recursively.
By implementing __deepcopy__ for SkuClass, PcdClassObject, we can customize
deepcopy function for them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: BobCF <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1288
This patch is one of build tool performance improvement
series patches.
This patch is going to use join function instead of
string += string2 statement.
Current code use string += string2 in a loop to combine
a string. while creating a string list in a loop and using
"".join(stringlist) after the loop will be much faster.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: BobCF <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1288
[V2]
Optimize this patch so that it can be easy to review.
This patch is just apply the change to original files while
not create new similar files.
[V1]
This patch is one of build tool performance improvement
series patches.
This patch is going to use python list to store the parser data
instead of using sqlite database.
The replacement solution is as below:
SQL insert: list.append()
SQL select: list comprehension. for example:
Select * from table where field = “something”
->
[ item for item in table if item[3] == “something”]
SQL update: python map function. for example:
Update table set field1=newvalue where filed2 = “something”.
-> map(lambda x: x[1] = newvalue,
[item for item in table if item[2] == “something”])
SQL delete: list comprehension.
With this change, We can save the time of interpreting SQL statement
and the time of write database to file system
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: BobCF <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
V2:
Extract the common part of new API and the original main() function
into one function.
V1:
https://bugzilla.tianocore.org/show_bug.cgi?id=1288
Currently, AutoGen and GenFds run in different python interpreters. The
parser are duplicated. This patch is going to create new API for GenFds
and have the build to call that API instead of executing GenFds.py. As
such, the GenFds and build can share the parser data.
This patch is expected to save the time of GenFds about 2~3 seconds.
More details will be logged in BZ.
This is the summary measure data generated from python cProfile for
building Ovmf.
Currently:
8379147 function calls (8135450 primitive calls) in 12.580 seconds
After applying this patch:
3428712 function calls (3418881 primitive calls) in 8.944 seconds
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Carsey Jaben <jaben.carsey@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
V2:
Fixed the issue that V1 adds new check
to the Pcds in the platform unused library INF files.
It breaks the existing platform.
V1?
The current code handle all the structure pcds
even if there is no module or library use them.
This patch is going to filter out the unused structure pcds.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add dummy RPC handler for RPCs that are not implemented as control
should be returned back to OP-TEE in case any RPC is invoked.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
1) remove an identical function and import it from Common.LongFilePathSupport
2) remove an import that is not needed/used.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by : Bob Feng <bob.c.feng@intel.com>
The macro MAX_ADDRESS represents the largest virtual address that
is valid for a certain architecture. For the BaseTools, this quantity
is irrelevant, since the same tools can be used to build for different
targets.
Since we only refer to it in a single place, which is an ASSERT() that
doesn't seem particularly useful (it ensures that memcpy() will not
be called with arguments that will make it read beyond the end of the
address space and wrap around), let's drop the ASSERT and all references
to MAX_ADDRESS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The maximum value that can be represented by the native word size
of the *target* should be irrelevant when compiling tools that
run on the build *host*. So drop the definition of MAX_UINTN, now
that we no longer use it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Parsing a string into an integer variable of the native word size
is not defined for the BaseTools, since the same tools may be used
to build firmware for different targets with different native word
sizes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Replace the default size limit of IsDevicePathValid() with a value
that does not depend on the native word size of the build host.
4 GiB seems sufficient as the upper bound of a device path handled
by UEFI.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Since we will be dropping the definition of MAX_UINTN, whose meaning
is ambiguous for the BaseTools, add a definition of MAX_UINT32 that
we can switch to.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Replace invocations of StrHexToUintn() with StrHexToUint64(), so
that we can drop the former.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Don't use the native word size string to number parsing routines,
but instead, use the 64-bit one and cast to UINTN.
Currently, the only user is in Source/C/DevicePath/DevicePathFromText.c
which takes care to use Strtoi64 () unless it assumes the value fits
in 32-bit, so this change is a no-op even on 32-bit build hosts.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In the context of the BaseTools, there is no such thing as a native word
size, given that the same set of tools may be used to build a firmware
image consisting of both 32-bit and 64-bit modules.
So update StrToIpv4Address() and StrToIpv6Address() to use UINT64
types instead of UINTN types when parsing strings.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
As Yonghong has some other focus, change him from maintainer
to reviewer, Bob will be the new maintainer.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
QEMU/mach-virt is rather unhelpful when it comes to tracking down
NULL pointer dereferences that occur while running in UEFI: since
we have NOR flash mapped at address 0x0, inadvertent reads go
unnoticed, and even most writes are silently dropped, unless you're
unlucky and the instruction in question is one that KVM cannot
emulate, in which case you end up with a QEMU crash like this:
error: kvm run failed Function not implemented
PC=000000013f7ff804 X00=000000013f7ab108 X01=0000000000000064
X02=000000013f801988 X03=00000000800003c4 X04=0000000000000000
X05=0000000096000044 X06=fffffffffffd8270 X07=000000013f7ab4a0
X08=0000000000000001 X09=000000013f803b88 X10=000000013f7e88d0
X11=0000000000000009 X12=000000013f7ab554 X13=0000000000000008
X14=0000000000000002 X15=0000000000000000 X16=0000000000000000
X17=0000000000000000 X18=0000000000000000 X19=0000000000000000
X20=000000013f81c000 X21=000000013f7ab170 X22=000000013f81c000
X23=0000000009000018 X24=000000013f407020 X25=000000013f81c000
X26=000000013f803530 X27=000000013f802000 X28=000000013f7ab270
X29=000000013f7ab0d0 X30=000000013f7fee10 SP=000000013f7a6f30
PSTATE=800003c5 N--- EL1h
and a warning in the host kernel log that load/store instruction
decoding is not supported by KVM.
Given that the first page of the flash device is not actually
used anyway, let's reduce the mappings of the peripheral space
and the flash device (both of which cover page #0) to only cover
what is actually required:
ArmVirtQemu.fdf:
> 0x00001000|0x001ff000
> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
ArmVirtQemuKernel.fdf:
> 0x00008000|0x001f8000
> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
For ArmVirtQemu, the resulting virtual mapping looks roughly like:
- [0, 4K) : flash, unmapped
- [4K, 2M) : flash, mapped as WB+X RAM
- [2M, 64M) : flash, unmapped
- [64M, 128M) : varstore flash, will be mapped by the NOR flash driver
- [128M, 256M) : peripherals, mapped as device
- [256M, 1GB) : 32-bit MMIO aperture, translated IO aperture, ECAM,
will be mapped by the PCI host bridge driver
- [1GB, ...) : RAM, mapped.
After this change, any inadvertent read or write from/to the first
physical page will trigger a translation fault inside the guest,
regardless of the nature of the instruction, without crashing QEMU.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The primary FV contains the firmware boot image, which is not
runtime updatable in our case. So exposing it to the NOR flash
driver is undesirable, since it may attempt to modify the NOR
flash contents. It is also rather pointless, since we don't
keep anything there that we care to expose. (the SEC and PEI
phase modules are not executable from DXE context, and the
contents of the embedded DXE phase FV are exposed by the DXE
core directly via the FVB2 protocol)
So let's disregard the NOR flash block that covers the primary
FV.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The ARM ArmMmuLib code currently does not take into account that
setting permissions on a region should take into account that a
region may not be mapped yet to begin with.
So when updating a section descriptor whose old value is zero,
pass in the address explicitly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
GetMemoryRegion() is used to obtain the attributes of an existing
mapping, to permit permission attribute changes to be optimized
away if the attributes don't actually change.
The current ARM code assumes that a section mapping or a page mapping
exists for any region passed into GetMemoryRegion(), but the region
may be unmapped entirely, in which case the code will crash. So check
if a section mapping exists before dereferencing it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
PcdPrePiCpuMemorySize is no longer used so drop the declarations from
the package DEC file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
PcdPrePiCpuMemorySize is no longer used so drop the PCD overrides
from all platform descriptions in ArmVirtPkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Drop the reference to gEmbeddedTokenSpaceGuid.PcdPrePiCpuMemorySize
which is never used.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Drop some PCD references that are not actually referenced from the
PlatformPei code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Derive the size of the GCD memory space map directly from the CPU's
information registers rather than from the PcdPrePiCpuMemorySize PCD,
which will be removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Derive the size of the GCD memory space map directly from the CPU's
information registers rather than from the PcdPrePiCpuMemorySize PCD,
which will be removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Derive the size of the GCD memory space map directly from the CPU's
information registers rather than from the PcdPrePiCpuMemorySize PCD,
which will be removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Derive the size of the GCD memory space map directly from the CPU's
information registers rather than from the PcdPrePiCpuMemorySize PCD,
which will be removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In preparation of dropping PcdPrePiCpuMemorySize entirely, base the
maximum size of the identity map on the capabilities of the CPU.
Since that may exceed what is architecturally permitted when using
4 KB pages, take MAX_ADDRESS into account as well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Use the new ArmLib helper to read the CPU's physical address limit
so we can drop our own homecooked one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add a helper function that returns the maximum physical address space
size as supported by the current CPU.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
AArch64 supports the use of more than 48 bits for physical and/or
virtual addressing, but only if the page size is set to 64 KB,
which is not supported by UEFI. So redefine MAX_ADDRESS to cover
only 48 address bits.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Currently, we map DRAM as EFI_MEMORY_WB, and the remainder of the
entire virtual address space is mapped with EFI_MEMORY_UC attributes,
regardless of whether any devices actually reside there.
Now that we are relaxing the address space limit to more than 40 bits,
mapping all that address space actually takes up more space in page
tables than we have so far made available as temporary RAM. So let's
get rid of the mapping rather than increasing the available RAM, given
that the mapping is not particularly useful anyway.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Up until now, we have been getting away with not declaring the ECAM
and translated I/O spaces at all in the GCD memory map, simply because
we map the entire address space with device attributes in the early PEI
code, and so the ECAM space will be mapped wherever it ends up.
Now that we are about to make changes to how ArmVirtQemu reasons
about the size of the address space, it would be better to get rid
of this mapping of the entire address space, since it can get
arbitrarily large without real benefit.
So start by mapping the ECAM and translated I/O spaces explicitly,
instead of relying on the early PEI mapping.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Drop the declaration and the implementation of CreateHoblist(),
which is not used anywhere.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Remove this module: it is unused, and should not be used as an
example going forward.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
As Star has some other focus, change Star from maintainer
to reviewer, Jian will be the first maintainer, and add
Hao as the second maintainer.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Acked-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Jian J Wang <jian.j.wang@intel.com>
This function is exposed by the MemoryAllocationLib header.
An AllocateZeroPool() function has been added to fix modules depending on
this library and this function.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1297
When the header files are not found for the used C structure, this script will
report the warning, let user know there is no header file to define C structure.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wang BinX A <binx.a.wang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In V2, change his to the, and add new maintainers follow up.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
While this isn't the only Aarch64 directory in the tree, let's
keep from adding more of them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
ArmMmuStandaloneMmLib.inf cannot be built for ARM so move it to the
[Components.AARCH64] section in ArmPkg.dsc.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The Standalone MM environment runs in S-EL0 in AArch64 on ARM Standard
Platforms. Privileged firmware e.g. ARM Trusted Firmware sets up its
architectural context including the initial translation tables for the
S-EL1/EL0 translation regime. The MM environment will still request ARM
TF to change the memory attributes of memory regions during
initialization.
The Standalone MM image is a FV that encapsulates the MM foundation
and drivers. These are PE-COFF images with data and text segments.
To initialise the MM environment, Arm Trusted Firmware has to create
translation tables with sane default attributes for the memory
occupied by the FV. This library sends SVCs to ARM Trusted Firmware
to request memory permissions change for data and text segments.
This patch adds a simple MMU library suitable for execution in S-EL0 and
requesting memory permissions change operations from Arm Trusted Firmware.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
PI v1.5 Specification Volume 4 defines Management Mode Core Interface
and defines EFI_MM_COMMUNICATION_PROTOCOL. This protocol provides a
means of communicating between drivers outside of MM and MMI
handlers inside of MM.
This patch implements the EFI_MM_COMMUNICATION_PROTOCOL DXE runtime
driver for AARCH64 platforms. It uses SMCs allocated from the standard
SMC range defined in DEN0060A_ARM_MM_Interface_Specification.pdf
to communicate with the standalone MM environment in the secure world.
This patch also adds the MM Communication driver (.inf) file to
define entry point for this driver and other compile
related information the driver needs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This patch defines PCDs to describe the base address and size of
communication buffer between normal world (uefi) and standalone MM
environment in the secure world.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
We no longer use per-instance GUIDs to identify NOR flash banks so
there is no longer a need to define them. Drop the Guid member from
the NOR_FLASH_DESCRIPTION type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Thomas Abraham <thomas.abraham@arm.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1356
Current PcdVpdBaseAddress is 32bit static Pcd. NON SPI platform needs to
configure it as Dynamic PCD. Emulator platform (such as NT32) may set its
value to 64bit address.
To meet with this usage, 64bit DynamicEx PcdVpdBaseAddress64 is introduced.
If its value is not zero, it will be used.
If its value is zero, static PcdVpdBaseAddress will be used.
When NON SPI platform enables VPD PCD, they need to set PcdVpdBaseAddress64.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
NorFlashQemuLib is one of the last remaining drivers in ArmVirtPkg
that are not based on the device tree received from QEMU.
For ArmVirtQemu, this does not really matter, given that the NOR
flash banks are always the same: the PEI code is linked to execute
in place from flash bank #0, and the fixed varstore PCDs refer to
flash bank #1 directly.
However, ArmVirtQemuKernel can execute at any offset, permitting it
to be used as an intermediary loader when running QEMU with secure
world emulation enabled, in which case NOR flash bank #0 is secure
only and contains the secure world firmware. In this case,
NorFlashQemuLib should not expose the first flash bank at all.
To prevent introducing too much internal knowledge about which flash
bank is accessible under which circumstances, let's switch to using
the DTB to decide which flash banks to expose to the NOR flash driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
DT has a [pseudo-]standardized 'status' property that can be set on
any node, and which signifies that a node should be treated as
absent unless it is set to 'ok' or 'okay'. So take this into account
when iterating over nodes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Currently, each flash bank controlled by ArmPlatformPkg/NorFlashDxe
has its own VendorHw GUID, and instances of NorFlashPlatformLib
describe each bank to the driver, along with the GUID for each.
This works ok for bare metal platforms, but it would be useful for
virtual platforms if we could obtain this information from a
device tree, which would require us to invent GUIDs on the fly,
given that the 'cfi-flash' binding does not include a GUID.
So instead, let's switch to a single GUID for all flash banks,
and update the driver's device path handling to include an index
to identify each bank uniquely.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Thomas Abraham <thomas.abraham@arm.com>
A subsequent patch will change the layout of devicepath nodes
produced by this driver. In preparation, make some tweaks to
the code to use a packed struct for the devicepath and to pass
the device index to NorFlashCreateInstance(). These are cosmetic
changes only, the resulting binaries should be identical.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Thomas Abraham <thomas.abraham@arm.com>
The last remaining users of the BdsLib.h header reside in the
edk2-platforms tree, and so it has been copied there. This
allows us to remove the original from ArmPkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Remove unused module type restriction for NULL instance.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Remove the duplicated IScsiDxe driver from FDF; Add required shell libraries; Update SYSTEM_CONFIGURATION data structure.
Test: Install and boot Windows 10.
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: David Wei <david.wei@intel.com>
Print debug messages if size of the VariableName plus DataSize exceeds
Max(Auth|Voltaile)VariableSize bytes. The messages will be useful if any
platform specific value of Max(Auth|Voltaile)VariableSize PCDs have to
be changed.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Our poor man's implementation of EnterS3WithImmediateWake () currently
sets a high TPL level to disable interrupts, and simply calls the
PEI entrypoint again after disabling the MMU.
Unfortunately, this is not sufficient: DMA capable devices such as
network controllers or USB controllers may still be enabled and
writing to memory, e.g., in response to incoming network packets.
So instead, do the full ExitBootServices() dance: allocate space and
get the memory map, call ExitBootServices(), and in case it fails, get
the memory map again and call ExitBootServices() again. This ensures
that all cleanup related to DMA capable devices is performed before
doing the warm reset.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In function UiDisplayMenu, the NewPos ptr which used to point to the
highlight menu entry. It will always point to the menu entry which
need to be highlighted or the gMenuOption menu if the highlight menu
is not found.
So we can remove the NULL ptr check for NewPos in this function.
And add the ASSERT code to avoid if any false positive reports
of NULL pointer dereference issue raised from static analysis.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BAR | std vga | vmsvga
---------------------------------
0 | Framebuffer | I/O space
1 | Reserved | Framebuffer
2 | MMIO | FIFO
- We cannot recognize VMW SVGA as BOCHS because that would confuse the
IsQxl setting in QemuVideoControllerDriverStart(),
- We cannot recognize VMW SVGA as BOCHS_MMIO because BAR2 on VMW SVGA is
not the BOCHS MMIO BAR (we can only use port IO).
Therefore the list of reasons for which we should introduce
QEMU_VIDEO_VMWARE_SVGA should name three reasons:
(1) Get framebuffer from correct PCI BAR
(2) Prevent using BAR2 for MMIO
(3) Prevent mis-recognizing VMW SVGA as QXL
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
This reverts commit 05a5379458.
The VMWare SVGA display device implemented by Qemu (-vga vmware) uses
an I/O-type BAR which is laid out such that some register offsets are
not aligned to the read/write width with which they are expected to be
accessed. However, we reverted the initialization of VMWare SVGA device,
we don't need such unaligned I/O.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
(cherry picked from commit 438ada5aa5)
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This reverts commit c137d95081.
The VMWare SVGA model now -- since commit 104bd1dc70 in QEMU --
falls back to stdvga (that is, Bochs) if we don't setup VMWare SVGA
FIFO.
To simplify QemuVideoDxe, we don't intend to implement the VMWare SVGA
FIFO setup feature. It means our current VMW SVGA driver code is
basically dead. To simplify the problem, we will replace the old
VMWare SVGA driver to Bochs interface. It should work on all QEMU
version.
The first step for using Bochs interface is to revert old driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
(cherry picked from commit 98856a724c)
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This reverts commit b2959e9f1a.
The VMWare SVGA display device implemented by Qemu (-vga vmware) uses
an I/O-type BAR which is laid out such that some register offsets are
not aligned to the read/write width with which they are expected to be
accessed. However, we will revert the initialization of VMWare SVGA
device later, we don't need such unaligned I/O.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
(cherry picked from commit e038bde267)
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Some SdMmc host controllers are run by clocks with different
frequency than it is reflected in Capabilities Register 1.
It is allowed by SDHCI specification ver. 4.2 - if BaseClkFreq
field value of the Capability Register 1 is zero, the clock
frequency must be obtained via another method.
Because the bitfield is only 8 bits wide, a maximum value
that could be obtained from hardware is 255MHz.
In case the actual frequency exceeds 255MHz, the 8-bit BaseClkFreq
member of SD_MMC_HC_SLOT_CAP structure occurs to be not sufficient
to be used for setting the clock speed in SdMmcHcClockSupply
function.
This patch adds new UINT32 array ('BaseClkFreq[]') to
SD_MMC_HC_PRIVATE_DATA structure for specifying
the input clock speed for each slot of the host controller.
All routines that are used for clock configuration are
updated accordingly.
This patch also adds new IN OUT BaseClockFreq field
in the Capability callback of the SdMmcOverride,
protocol which allows to update BaseClkFreq value.
The patch reuses original commit from edk2-platforms:
20f6f144d3a8 ("Marvell/Drivers: XenonDxe: Allow overriding base clock
frequency")
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Some SD Host Controlers need to do additional operations after clock
frequency switch.
This patch add new callback type to NotifyPhase of the SdMmcOverride
protocol. It is called after SdMmcHcClockSupply.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Some SD Host Controllers use different values in Host Control 2 Register
to select UHS Mode. This patch adds a new UhsSignaling type routine to
the NotifyPhase of the SdMmcOverride protocol.
UHS signaling configuration is moved to a common, default routine
(SdMmcHcUhsSignaling). After it is executed, the protocol producer
can override the values if needed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
In order to ensure bigger flexibility in the NotifyPhase
routine of the SdMmcOverride protocol, enable using an
optional phase-specific data. This will allow to exchange
more information between the protocol producer driver
and SdMmcPciHcDxe in the newly added callbacks.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1300
Provides PCD selection for FSP Wrapper to support Dispatch
mode. Also PcdFspmBaseAddress should support Dynamic for
recovery scenario (multiple FSP-M binary in flash)
Test: Verified on internal platform and both API and
DISPATCH modes booted successfully.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Desimone Nathaniel L <nathaniel.l.desimone@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
When setting up the stack in the startup code and jumping into C code
for the first time, ensure that the frame pointer register is cleared
so that backtraces terminate correctly. Otherwise, output like the
below is shown when encountering an exception on a DEBUG build:
Synchronous Exception at 0x0000000078A14780
PC 0x000078A14780 (0x000078A00000+0x00014780) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A10634 (0x000078A00000+0x00010634) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A11CF0 (0x000078A00000+0x00011CF0) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A11DD0 (0x000078A00000+0x00011DD0) [ 0] ArmVeNorFlashDxe.dll
PC 0x00007BC9D87C (0x00007BC98000+0x0000587C) [ 1] PartitionDxe.dll
PC 0x00007BC99B3C (0x00007BC98000+0x00001B3C) [ 1] PartitionDxe.dll
PC 0x00007F362F50 (0x00007F359000+0x00009F50) [ 2] DxeCore.dll
PC 0x00007BD63BB0 (0x00007BD5B000+0x00008BB0) [ 3] BdsDxe.dll
PC 0x00007BD6EE00 (0x00007BD5B000+0x00013E00) [ 3] BdsDxe.dll
PC 0x00007BD67C70 (0x00007BD5B000+0x0000CC70) [ 3] BdsDxe.dll
PC 0x00007F3724F0 (0x00007F359000+0x000194F0) [ 4] DxeCore.dll
PC 0x00004008FC30
PC 0x000040090130
PC 0x5800F6025800F5E1
Recursive exception occurred while dumping the CPU state
which is rather unhelpful, given that this prevent the remaining debug
output from being printed (register dump, stack dump, fault related
system registers etc)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
When setting up the stack in the startup code and jumping into C code
for the first time, ensure that the frame pointer register is cleared
so that backtraces terminate correctly. Otherwise, output like the
below is shown when encountering an exception on a DEBUG build:
Synchronous Exception at 0x0000000078A14780
PC 0x000078A14780 (0x000078A00000+0x00014780) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A10634 (0x000078A00000+0x00010634) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A11CF0 (0x000078A00000+0x00011CF0) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A11DD0 (0x000078A00000+0x00011DD0) [ 0] ArmVeNorFlashDxe.dll
PC 0x00007BC9D87C (0x00007BC98000+0x0000587C) [ 1] PartitionDxe.dll
PC 0x00007BC99B3C (0x00007BC98000+0x00001B3C) [ 1] PartitionDxe.dll
PC 0x00007F362F50 (0x00007F359000+0x00009F50) [ 2] DxeCore.dll
PC 0x00007BD63BB0 (0x00007BD5B000+0x00008BB0) [ 3] BdsDxe.dll
PC 0x00007BD6EE00 (0x00007BD5B000+0x00013E00) [ 3] BdsDxe.dll
PC 0x00007BD67C70 (0x00007BD5B000+0x0000CC70) [ 3] BdsDxe.dll
PC 0x00007F3724F0 (0x00007F359000+0x000194F0) [ 4] DxeCore.dll
PC 0x00004008FC30
PC 0x000040090130
PC 0x5800F6025800F5E1
Recursive exception occurred while dumping the CPU state
which is rather unhelpful, given that this prevent the remaining debug
output from being printed (register dump, stack dump, fault related
system registers etc)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
SdReadWrite can be called with a NULL Token for synchronous operations.
Add guard for DEBUG print to only print event pointer with Token is not
NULL.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Fix a typo in the 32-bit ARM version of the GICv3 driver, which uses
the wrong system register encoding to access ICC_IAR1, and attempted
to access ICC_IAR0 instead. This results in boot time hangs both
under QEMU emulation and on real hardware.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
BaseIoLibIntrinsicArmVirt was created to prevent LTO from merging
accesses to MMIO regions, resulting in instructions with multiple
output registers that KVM on ARM cannot emulate (since the exception
syndrome information that KVM relies on can only describe a single
output register)
However, using double word loads on ARM amounts to the same thing,
and so code that relies on doing 64-bit MMIO to regions that are
emulated under KVM (such as the GICv3 TYPER register) will still
suffer from the original issue.
So replace ldrd and strd with equivalent two instruction sequences.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1305
The patch reverts commit 1ed6498c4a
* UefiCpuPkg/CommonFeature: Skip locking when the feature is disabled
FEATURE_CONTROL.Lock bit is controlled by feature
CPU_FEATURE_LOCK_FEATURE_CONTROL_REGISTER. The commit 1ed649 fixes
a bug that when the feature is disabled, the Lock bit is cleared.
But it's a security hole if the bit is cleared when booting OS.
We can argue that platform needs to make sure the value
of PcdCpuFeaturesUserConfiguration should be set properly to make
sure feature CPU_FEATURE_LOCK_FEATURE_CONTROL_REGISTER is enabled.
But it's better to guarantee this in the generic core code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1142
The fix is similar to commit ebb6c7633b.
We found that a similar fix should be applied to the NVMe PEI driver as
well. Hence, this one is for the PEI counterpart driver.
According to the the NVM Express spec Revision 1.1, for some commands
(like Get/Set Feature Command, Figure 89 & 90 of the spec), the Memory
Buffer maybe optional although the command opcode indicates there is a
data transfer between host & controller (Get/Set Feature Command, Figure
38 of the spec).
Hence, this commit refine the checks for the 'TransferLength' and
'TransferBuffer' field of the
EDKII_PEI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET structure to address this
issue.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
This reverts commit 8cd4e734cc.
It is not a real bug fix. It should not be pushed after
Hard Feature Freeze for edk2-stable201811 tag.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Bi Dandan <dandan.bi@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1312
Text format for AcpiEx device path in UEFI Spec:
AcpiEx(HID,CID,UID,HIDSTR,CIDSTR,UIDSTR)
AcpiEx(HID|HIDSTR,(CID|CIDSTR,UID|UIDSTR))(Display Only)
When convert device path to text for AcpiEx device path,
current code check AllowShortcuts parameter to convert
the device path to DisplayOnly text format(shorter text
representation) by mistake.
It should check DisplayOnly parameter.
This commit is to fix this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In current implementation, core and package level sync uses same semaphores.
Sharing the semaphore may cause wrong execution order.
For example:
1. Feature A has CPU_FEATURE_CORE_BEFORE dependency with Feature B.
2. Feature C has CPU_FEATURE_PACKAGE_AFTER dependency with Feature B.
The expected feature initialization order is A B C:
A ---- (Core Depends) ----> B ---- (Package Depends) ----> C
For a CPU has 1 package, 2 cores and 4 threads. The feature initialization
order may like below:
Thread#1 Thread#2 Thread#3 Thread#4
[A.Init] [A.Init] [A.Init]
Release(S1, S2) Release(S1, S2) Release(S3, S4)
Wait(S1) * 2 Wait(S2) * 2 <------------------------------- Core sync
[B.Init] [B.Init]
Release (S1,S2,S3,S4)
Wait (S1) * 4 <----------------------------------------------------- Package sync
Wait(S4 * 2) <- Core sync
[B.Init]
In above case, for thread#4, when it syncs in core level, Wait(S4) * 2 isn't
blocked and [B.Init] runs. But [A.Init] hasn't run in thread#3. It's wrong!
Thread#4 should execute [B.Init] after thread#3 executes [A.Init] because B
core level depends on A.
The reason of the wrong execution order is that S4 is released in thread#1
by calling Release (S1, S2, S3, S4) and in thread #4 by calling
Release (S3, S4).
To fix this issue, core level sync and package level sync should use separate
semaphores.
In above example, the S4 released in Release (S1, S2, S3, S4) should not be the
same semaphore as that in Release (S3, S4).
Related BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1311
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
In current implementation, core and package level sync uses same semaphores.
Sharing the semaphore may cause wrong execution order.
For example:
1. Feature A has CPU_FEATURE_CORE_BEFORE dependency with Feature B.
2. Feature C has CPU_FEATURE_PACKAGE_AFTER dependency with Feature B.
The expected feature initialization order is A B C:
A ---- (Core Depends) ----> B ---- (Package Depends) ----> C
For a CPU has 1 package, 2 cores and 4 threads. The feature initialization
order may like below:
Thread#1 Thread#2 Thread#3 Thread#4
[A.Init] [A.Init] [A.Init]
Release(S1, S2) Release(S1, S2) Release(S3, S4)
Wait(S1) * 2 Wait(S2) * 2 <------------------------------- Core sync
[B.Init] [B.Init]
Release (S1,S2,S3,S4)
Wait (S1) * 4 <----------------------------------------------------- Package sync
Wait(S4 * 2) <- Core sync
[B.Init]
In above case, for thread#4, when it syncs in core level, Wait(S4) * 2 isn't
blocked and [B.Init] runs. But [A.Init] hasn't run in thread#3. It's wrong!
Thread#4 should execute [B.Init] after thread#3 executes [A.Init] because B
core level depends on A.
The reason of the wrong execution order is that S4 is released in thread#1
by calling Release (S1, S2, S3, S4) and in thread #4 by calling
Release (S3, S4).
To fix this issue, core level sync and package level sync should use separate
semaphores.
In above example, the S4 released in Release (S1, S2, S3, S4) should not be the
same semaphore as that in Release (S3, S4).
Related BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1311
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
V2 changes:
V1 change has regression which caused by change feature order.
V2 changes logic to detect dependence not only for the
neighborhood features. It need to check all features in the list.
V1 Changes:
In current code logic, only adjust feature position if current
CPU feature position not follow the request order. Just like
Feature A need to be executed before feature B, but current
feature A registers after feature B. So code will adjust the
position for feature A, move it to just before feature B. If
the position already met the requirement, code will not adjust
the position.
This logic has issue when met all below cases:
1. feature A has core or package level dependence with feature B.
2. feature A is register before feature B.
3. Also exist other features exist between feature A and B.
Root cause is driver ignores the dependence for this case, so
threads may execute not follow the dependence order.
Fix this issue by change code logic to adjust feature position
for CPU features which has dependence relationship.
Related BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1311
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
In function UiDisplayMenu, the NewPos ptr which used to point to the
highlight menu entry. It will always point to the menu entry which
need to be highlighted or the gMenuOption menu if the highlight menu
is not found.
So we can remove the NULL ptr check for NewPos in this function.
And add the ASSERT code to avoid if any false positive reports
of NULL pointer dereference issue raised from static analysis.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1303
Today's code generates assembly code as below for
InternalSyncIncrement:
__asm__ __volatile__ (
"movl $1, %%eax \n\t"
"lock \n\t"
"xadd %%eax, %1 \n\t"
"inc %%eax \n\t"
: "=a" (Result), // %0
"+m" (*Value) // %1
: // no inputs that aren't also outputs
: "memory",
"cc"
);
0: 55 pushl %ebp
1: 89 e5 movl %esp, %ebp
3: 8b 45 08 movl 8(%ebp), %eax
6: b8 01 00 00 00 movl $1, %eax
b: f0 lock
c: 0f c1 00 xaddl %eax, _InternalSyncIncrement(%eax)
f: 40 incl %eax
10: 5d popl %ebp
11: c3 retl
Line #3 and Line #6 both use EAX as destination register.
Line #c uses EAX and (EAX).
The output operand "=a" tells GCC that EAX is used for output.
But GCC only assumes that EAX will be used in the very last
instruction.
Per GCC document,
"Use the '&' constraint modifier on all output operands that must
not overlap an input. Otherwise, GCC may allocate the output
operand in the same register as an unrelated input operand, on
the assumption that the assembler code consumes its inputs before
producing outputs. This assumption may be false if the assembler
code actually consists of more than one instruction."
"=&a" should be used to tell GCC not use EAX before the assembly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: 8a94eb9283
Fixes: 17634d026f
When static paging is disabled, page table for below 4GB is created
and page table for above 4GB is created dynamically in page fault
handler.
Today's implementation only allow SMM access-out to below types of
memory address no matter static paging is enabled or not:
1. Reserved, run time and ACPI NVS type
2. MMIO
But certain platform feature like RAS may need to access other types
of memory from SMM. Today's code blocks these platforms.
This patch simplifies the policy to only block when static paging
is used so that the static paging can be disabled in these platforms
to meet their SMM access-out need.
Setting PcdCpuSmmStaticPageTable to FALSE can disable the static
paging.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Setting GICD_IROUTERn.IRM and GICD_IROUTERn.{Aff3,Aff2,Aff1,Aff0}
at the same time is nonsensical (see 8.9.13 in the GICv3 spec, which
says of GICD_IROUTERn.IRM that "When this bit is set to 1,
GICD_IROUTER<n>.{Aff3,Aff2,Aff1,Aff0} are UNKNOWN"). There is also no
guarantee that IRM is implemented (see GICD_TYPER.No1N which indicates
whether the implementation supports this or not).
Let's thus not set this bit, as we want all SPIs to be delivered to the
same CPU, and not be broadcast to all of them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <ming.huang@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1295
This issue originates from following patch which allows to enable
paging if PcdImageProtectionPolicy and PcdDxeNxMemoryProtectionPolicy
(in addition to PcdSetNxForStack) are set to enable related features.
5267926134
Due to above change, PcdImageProtectionPolicy will be set to 0 by
default in many platforms, which, in turn, cause following code in
MdeModulePkg\Core\Dxe\Misc\MemoryProtection.c fail the creation of
notify event of CpuArchProtocol.
1138: if (mImageProtectionPolicy != 0 ||
PcdGet64 (PcdDxeNxMemoryProtectionPolicy) != 0) {
1139: Status = CoreCreateEvent (
...
1142: MemoryProtectionCpuArchProtocolNotify,
...
1145: );
Then following call flow won't be done and Guard pages will not be
set as not-present in SetAllGuardPages() eventually.
MemoryProtectionCpuArchProtocolNotify()
=> HeapGuardCpuArchProtocolNotify()
=> SetAllGuardPages()
The solution is removing the if(...) statement so that the notify
event will always be created and registered. This won't cause
unnecessary code execution because, in the notify event handler,
the related PCDs like
PcdImageProtectionPolicy and
PcdDxeNxMemoryProtectionPolicy
will be checked again before doing related jobs.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
At the end of of MemoryProtectionCpuArchProtocolNotify there's cleanup
code to free resource. But at line 978, 994, 1005 the function returns
directly. This patch use "goto" to replace "return" to make sure the
resource is freed before exit.
1029: CoreCloseEvent (Event);
1030: return;
There's another memory leak after calling gBS->LocateHandleBuffer() in
the same function:
Status = gBS->LocateHandleBuffer (
ByProtocol,
&gEfiLoadedImageProtocolGuid,
NULL,
&NoHandles,
&HandleBuffer
);
HandleBuffer is allocated in above call but never freed. This patch
will also add code to free it.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1305
Today's code unconditionally sets the IA32_FEATURE_CONTROL.Lock to 1
no matter the feature is enabled or not.
The patch fixes this issue by only setting the Lock bit to 1 when
the feature is enabled.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
This reverts commit 05a5379458.
The VMWare SVGA display device implemented by Qemu (-vga vmware) uses
an I/O-type BAR which is laid out such that some register offsets are
not aligned to the read/write width with which they are expected to be
accessed. However, we reverted the initialization of VMWare SVGA device,
we don't need such unaligned I/O.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
This reverts commit c137d95081.
The VMWare SVGA model now -- since commit 104bd1dc70 in QEMU --
falls back to stdvga (that is, Bochs) if we don't setup VMWare SVGA
FIFO.
To simplify QemuVideoDxe, we don't intend to implement the VMWare SVGA
FIFO setup feature. It means our current VMW SVGA driver code is
basically dead. To simplify the problem, we will replace the old
VMWare SVGA driver to Bochs interface. It should work on all QEMU
version.
The first step for using Bochs interface is to revert old driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
This reverts commit b2959e9f1a.
The VMWare SVGA display device implemented by Qemu (-vga vmware) uses
an I/O-type BAR which is laid out such that some register offsets are
not aligned to the read/write width with which they are expected to be
accessed. However, we will revert the initialization of VMWare SVGA
device later, we don't need such unaligned I/O.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
[-c <retry count>] is to define the number of times to transmit request
packets and wait for a response. The default value is 6. But it doesn't
specify the behavior of zero value. Here, The patch is to clear that:
Set to zero also means to use the default value.
Cc: Carsey Jaben <jaben.carsey@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
This patch is to fix the invalid setting of MTFTP local port. The
issue can be reproduced by tftp shell command by using [-l port]
option.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
V2:
Add missed library instance for NetworkPkg iSCSI driver.
This patch replaces the MdeModulePkg TCP, PXE and iSCSI driver with those
ones in NetworkPkg. These 3 drivers in MdeModulePkg are not being actively
maintained and will be removed from edk2 master soon.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
V2:
Add missed library instance for NetworkPkg iSCSI driver.
This patch replaces the MdeModulePkg TCP, PXE and iSCSI driver with those
ones in NetworkPkg. These 3 drivers in MdeModulePkg are not being actively
maintained and will be removed from edk2 master soon.
Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>
This patch replaces the MdeModulePkg TCP, PXE and iSCSI driver with those
ones in NetworkPkg. These 3 drivers in MdeModulePkg are not being actively
maintained and will be removed from edk2 master soon.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This patch replaces the MdeModulePkg TCP, PXE and iSCSI driver with those
ones in NetworkPkg. These 3 drivers in MdeModulePkg are not being actively
maintained and will be removed from edk2 master soon.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
V3:
Update the patch to avoid "reduce" function fail.
V2:
Support to extract the common cc flag from a
combined cc flag string. For example
MSFT:*_*_IA32_CC_FLAGS = /D DISABLE_NEW_DEPRECATED_INTERFACES /DDEF_IA32
MSFT:*_*_X64_CC_FLAGS = /DDEF_X64 /D DISABLE_NEW_DEPRECATED_INTERFACES
V1:
Use common cc flags for building PcdValueInit. The common
cc flags include the cc flag which is under common arch and
under all build arches.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Update aslc rule to rename the temp output file from .efi to .pecoff.
This change can avoid the conflict .efi file name in output directory.
One is the driver image, another is aslc temp output file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Provide fully-qualified path to shell scripts
Section 3.6.2 of version 2.2 of the shell specification requires that
the first positional argument (i.e. arg 0) of a shell script resolves
to "the full path name of the script itself."
Ensure that the startup script and any scripts launched by the shell
meet this requirement.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Add a function to return a clean, fully-qualified version of some path.
This function handles a (possibly "dirty") input path that may or may
not include a file system reference.
If it does not include a file system reference, then if the input path
does not begin with a forward or backward slash, then the input path is
relative to the current working directory of the current file system.
Otherwise, it is an absolute path within the current file system.
If it does include a file system reference, it may be a reference to the
current or some other file system. If the file system reference is not
immediately followed by a forward or backward slash, then the input path
is relative to the current working directory of the given file system.
Otherwise, it is an absolute path within the given file system.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In some special cases, after BSP sends Init-sipi-sipi signal
AP needs more time to start the Ap procedure. In this case
BSP may think AP has finished its task but in fact AP hasn't began
yet.
Rollback former change to keep the status which only be used
when AP really finished task.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
According to PCD_DATABASE_INIT in
edk2\MdeModulePkg\Include\Guid\PcdDataBaseSignatureGuid.h,
the max size for string PCD should not exceed USHRT_MAX 65535(0xffff).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Replace the current NULL pointer dereference to retrieve Field's
offset with a call to OFFSET_OF(). This is implemented via
__builtin_offsetof for GCC and Clang, which eliminates UB caught by
Clang UndefinedBehaviorSanitizer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
GCC link script is used to discard the unused section data from ELF image.
ASLDLINK_FLAGS requires it to remove the unnecessary section data, then
GenFw can be used to retrieve the correct data section from ELF image.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
This patch is going to add a check that only if the
attribute of a EFI variable include 'NV', it will be
added into PcdNvStoreDefaultValueBuffer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The recent changes in these three source files introduce the trailing space.
This patch removes them to follow edk2 coding style.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Today's PiSmmIpl implementation initially sets SMRAM to WB to speed
up the SMM core/modules loading before SMM CPU driver runs.
When SMM CPU driver runs, PiSmmIpl resets the SMRAM to UC. It's done
in SmmIplDxeDispatchEventNotify(). COMM_BUFFER_SMM_DISPATCH_RESTART
is returned from SMM core that SMM CPU driver is just dispatched.
Since now the SMRR is widely used to control the SMRAM cache setting.
It's not needed to reset the SMRAM to UC anymore.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1275
The LookupFreeMemRegion() in RuntimeMemAllocate.c is used to look-up
free memory region for runtime resource allocation, which was designed
to support runtime authenticated variable service.
The ReqPages in this function is the required pages to be allocated,
which depends on the malloc() call in internal OpenSSL routines. The
direct offset subtractions on ReqPages may bring possible integer
overflow issue.
This patch is to add the extra parameter checks to remove this possible
overflow risk.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Long Qin <qin.long@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Build UefiCpuPkg with below configuration:
Architecture(s) = IA32
Build target = NOOPT
Toolchain = VS2015x86
Below error info shows up:
DxeRegisterCpuFeaturesLib.lib(CpuFeaturesInitialize.obj) :
error LNK2001: unresolved external symbol __allmul
Valid mDependTypeStr type only have 5 items, use UINT32 type cast
to fix this error.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1279
For function ResolveSymlink(), the below codes:
if (CompareMem ((VOID *)&PreviousFile, (VOID *)Parent,
sizeof (UDF_FILE_INFO)) != 0) {
CleanupFileInformation (&PreviousFile);
}
CopyMem ((VOID *)&PreviousFile, (VOID *)File, sizeof (UDF_FILE_INFO));
If the contents in 'PreviousFile' and 'File' are the same, call to
"CleanupFileInformation (&PreviousFile);" will free the buffers in 'File'
as well. This will lead to potential memory double free/use after free
issues.
This commit will add additional check to address the above issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1279
The content within 'File' is the output data for ResolveSymlink(). This
commit will add checks to ensure the content in 'File' is valid.
Otherwise, possible null pointer dereference issue will occur during the
subsequent usage of the data returned by ResolveSymlink().
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Index is initialized to MAX_UINT16 as default failure value, which
is what the ASSERT is supposed to test for. The ASSERT condition
however can never return FALSE for INT16 != int, as due to
Integer Promotion[1], Index is converted to int, which can never
result in -1.
Furthermore, Index is used as a for loop index variable inbetween its
initialization and the ASSERT, so the value is unconditionally
overwritten too.
Fix the ASSERT check to compare Index to its upper boundary, which it
will be equal to if the loop was not broken out of on success.
[1] ISO/IEC 9899:2011, 6.5.9.4
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Index is initialized to MAX_UINT16 as default failure value, which
is what the ASSERT is supposed to test for. The ASSERT condition
however can never return FALSE for INT16 != int, as due to
Integer Promotion[1], Index is converted to int, which can never
result in -1.
Furthermore, Index is used as a for loop index variable inbetween its
initialization and the ASSERT, so the value is unconditionally
overwritten too.
Fix the ASSERT check to compare Index to its upper boundary, which it
will be equal to if the loop was not broken out of on success.
[1] ISO/IEC 9899:2011, 6.5.9.4
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1286
This issue is introduced by bb685071c2.
The *MemorySpaceMap assigned with NULL (line 1710) value might be
accessed (line 1726/1730) without any sanity check. Although it won't
happen in practice because of line 1722, we still need to add check
against NULL to make static code analyzer happy.
1710 *MemorySpaceMap = NULL;
.... ...
1722 if (DescriptorCount == *NumberOfDescriptors) {
.... ...
1726 Descriptor = *MemorySpaceMap;
.... ...
1730 BuildMemoryDescriptor (Descriptor, Entry);
Tests:
Pass build and boot to shell.
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
When (Len < Offset) is TRUE, indicating the data to visit is beyond
the boundary, the error message is printed but the function doesn't
return NULL.
It's a typo when modifying the commit 4c034bf62.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Today's implementation doesn't check whether the length of
descriptor is valid before using it.
The patch fixes this issue by syncing the similar fix to UsbBusDxe.
70c3c2370a
*MdeModulePkg/UsbBus: Reject descriptor whose length is bad
Additionally the patch also rejects the data when length is
larger than sizeof (PeiUsbDevice->ConfigurationData).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Today's implementation reads the Type/Length field in the USB
descriptors data without checking whether the offset to read is
beyond the data boundary.
The patch fixes this issue by syncing the fix in commit
4c034bf62c
*MdeModulePkg/UsbBus: Fix out-of-bound read access to descriptors
ParsedBytes in UsbBusPei.GetExpectedDescriptor() is different from
Consumed in UsbBusDxe.UsbCreateDesc().
ParsedBytes is the offset of found descriptor while Consumed is
offset of next descriptor of found one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
The block returned from Mtftp6RemoveBlockNum is not the total received and
saved block number if it works in passive (Slave) mode.
The issue was exposed by the EMS test.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The block returned from Mtftp4RemoveBlockNum is not the total received and
saved block number if it works in passive (Slave) mode.
The issue was exposed by the EMS test.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1274
In current code, EhcMonitorAsyncRequests (timer handler) will do
unmap and map operations for AsyncIntTransfers to "Flush data from
PCI controller specific address to mapped system memory address".
EhcMonitorAsyncRequests
EhcFlushAsyncIntMap
PciIo->Unmap
IoMmu->SetAttribute
PciIo->Map
IoMmu->SetAttribute
This may impact the boot performance.
Since the data buffer for EhcMonitorAsyncRequests is internal
buffer, we can allocate common buffer by PciIo->AllocateBuffer
and map the buffer with EfiPciIoOperationBusMasterCommonBuffer,
then the unmap and map operations can be removed.
///
/// Provides both read and write access to system memory by
/// both the processor and a bus master. The buffer is coherent
/// from both the processor's and the bus master's point of view.
///
EfiPciIoOperationBusMasterCommonBuffer,
Test done:
USB KB works normally.
USB disk read/write works normally.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
V3:
Call XhcFreeUrb after XhcCreateTransferTrb fails in XhcCreateTrb.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1274
In current code, XhcMonitorAsyncRequests (timer handler) will do
unmap and map operations for AsyncIntTransfers to "Flush data from
PCI controller specific address to mapped system memory address".
XhcMonitorAsyncRequests
XhcFlushAsyncIntMap
PciIo->Unmap
IoMmu->SetAttribute
PciIo->Map
IoMmu->SetAttribute
This may impact the boot performance.
Since the data buffer for XhcMonitorAsyncRequests is internal
buffer, we can allocate common buffer by PciIo->AllocateBuffer
and map the buffer with EfiPciIoOperationBusMasterCommonBuffer,
then the unmap and map operations can be removed.
///
/// Provides both read and write access to system memory by
/// both the processor and a bus master. The buffer is coherent
/// from both the processor's and the bus master's point of view.
///
EfiPciIoOperationBusMasterCommonBuffer,
Test done:
USB KB works normally.
USB disk read/write works normally.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
V3:
Match function parameter name and description between
XhciSched.c and XhciSched.h.
V2:
Add the missing "FreePool (Data);".
Remove the unnecessary indentation change.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1274
Extract new XhciInsertAsyncIntTransfer function from
XhcAsyncInterruptTransfer.
It is code preparation for following patch,
no essential functional change.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
This reverts commit 51d17bb7b0.
commit 51d17bb7b0 adds new check
of Pcds in the platform unused library INF files.
It breaks the existing platform.
To avoid the impact, roll back this change first.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob C Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1235
When update contents in HiiDatabase, like:
1. Add/update/remove package list
2. Add/update string
3. Add/update image
We should make these operations atomic to prevent the
potential issue that the one update operation with
higher TPL may interrupt another.
This commit is to make the HiiDatabase update behaviors
atomic by adding EfiAcquireLock/EfiReleaseLock function.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1235
Function "HiiGetConfigurationSetting" may be called
when HiiDatabase contents have been updated.
And it is just to call function "HiiGetDatabaseInfo" to
get the contents in HiiDatabase and call function
"HiiGetConfigRespInfo" and get the configuration response
string form HII drivers.
So here we can remove function "HiiGetConfigurationSetting"
and make caller to call "HiiGetDatabaseInfo" and
"HiiGetConfigRespInfo" directly.
And thus it also can distinguish which code blocks are to
operate HiiDatabase contents and which code blocks are not.
Then it's easy to know which code blocks should be atomic
when updating HiiDatabase contents.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Roll back code modify by commit 9e47e6f908,
if ForceRebase not False or True, the GenFv command not need add parameter
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Current code assume only one dependence (before or after) for one
feature. Enhance code logic to support feature has two dependence
(before and after) type.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Code initialized in function can't be correctly detected by build tool.
Add code to clearly initialize the local variable before use it.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Changes include:
1. Remove extra white space at the end of line.
2. Add comments for the new add function parameter.
3. Update IN OUT tag for function parameter.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Code initialized in function can't be correctly detected by build tool.
Add code to clearly initialize the local variable before use it.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Freed-memory guard is used to detect UAF (Use-After-Free) memory issue
which is illegal access to memory which has been freed. The principle
behind is similar to pool guard feature, that is we'll turn all pool
memory allocation to page allocation and mark them to be not-present
once they are freed.
This also implies that, once a page is allocated and freed, it cannot
be re-allocated. This will bring another issue, which is that there's
risk that memory space will be used out. To address it, the memory
service add logic to put part (at most 64 pages a time) of freed pages
back into page pool, so that the memory service can still have memory
to allocate, when all memory space have been allocated once. This is
called memory promotion. The promoted pages are always from the eldest
pages which haven been freed.
This feature brings another problem is that memory map descriptors will
be increased enormously (200+ -> 2000+). One of change in this patch
is to update MergeMemoryMap() in file PropertiesTable.c to allow merge
freed pages back into the memory map. Now the number can stay at around
510.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This issue is hidden in current code but exposed by introduction
of freed-memory guard feature due to the fact that the feature
will turn all pool allocation to page allocation.
The solution is moving the memory allocation in CoreGetMemorySpaceMap()
to be out of the GCD memory map lock.
CoreDumpGcdMemorySpaceMap()
=> CoreGetMemorySpaceMap()
=> CoreAcquireGcdMemoryLock () *
AllocatePool()
=> InternalAllocatePool()
=> CoreAllocatePool()
=> CoreAllocatePoolI()
=> CoreAllocatePoolPagesI()
=> CoreAllocatePoolPages()
=> FindFreePages()
=> PromoteMemoryResource()
=> CoreAcquireGcdMemoryLock() **
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The freed-memory guard feature will cause a recursive calling
of InitializePageTablePool(). This is due to a fact that
AllocateAlignedPages() is used to allocate page table pool memory.
This function will most likely call gBS->FreePages to free unaligned
pages and then cause another round of page attributes change, like
below (freed pages will be always marked not-present if freed-memory
guard is enabled)
FreePages() <===============|
=> CpuSetMemoryAttributes() |
=> <if out of page table> |
=> InitializePageTablePool() |
=> AllocateAlignedPages() |
=> FreePages() ================|
The solution is add a global variable as a lock in page table pool
allocation function and fail any other requests if it has not been
done.
Since this issue will only happen if free-memory guard is enabled,
it won't affect CpuSetMemoryAttributes() in default build of a BIOS.
If free-memory guard is enabled, it only affect the pages
(failed to mark them as not-present) freed in AllocateAlignedPages().
Since those freed pages haven't been used yet (their addresses not
yet exposed to code outside AllocateAlignedPages), it won't compromise
the freed-memory guard feature.
This change will just fail the CpuSetMemoryAttributes() called from
FreePages() but it won't fail the FreePages(). So the error status
won't be propagated upper layer of code.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Non-stop mode was introduced / explained in commit 8f2613628a
("MdeModulePkg/MdeModulePkg.dec: add new settings for PCDs",
2018-08-30).
The macro HEAP_GUARD_NONSTOP_MODE was added to CpuDxe in commit
dcc026217f ("UefiCpuPkg/CpuDxe: implement non-stop mode for uefi",
2018-08-30).
Another instance of the macro HEAP_GUARD_NONSTOP_MODE was added to
PiSmmCpuDxeSmm -- with BIT1|BIT0 replaced with BIT3|BIT2 -- in commit
09afd9a42a ("UefiCpuPkg/PiSmmCpuDxeSmm: implement non-stop mode for
SMM", 2018-08-30)
Since the freed-memory guard is for UEFI-only. This patch only updates
HEAP_GUARD_NONSTOP_MODE in "UefiCpuPkg/CpuDxe/CpuDxe.h" (add BIT4).
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
UAF (Use-After-Free) memory issue is kind of illegal access to memory
which has been freed. It can be detected by a new freed-memory guard
enforced onto freed memory.
BIT4 of following PCD is used to enable the freed-memory guard feature.
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPropertyMask
Please note this feature is for debug purpose and should not be enabled
in product BIOS, and cannot be enabled with pool/page heap guard at the
same time. It's disabled by default.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This cleanup is meant for avoiding misuse of newly introduced BIT4
(UAF detection) of PCD PcdHeapGuardPropertyMask, because it applies
to all types of physical memory. In another words,
PcdHeapGuardPoolType and PcdHeapGuardPageType don't have effect to
the BIT4 of PcdHeapGuardPropertyMask.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Pyrite 2.0 spec has been published, update the spec link info for this file.
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
The MacroDict parameter goes around in circles through 4 functions without use.
1. GetSectionData calls into GetLeafSection, otherwise doesn?t use MacroDict
2. GetLeafSection calls into GetFileStatement, otherwise doesn?t use MacroDict
3. GetFileStatement calls into GetFilePart, otherwise doesn?t use MacroDict
4. GetFilePart calls into GetSectionData, otherwise doesn?t use MacroDict
Go to 1 and repeat forever.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Change lists and tuples used solely for "in" testing to sets.
These operations are not order dependent.
fixed some line length for PEP8 compliance on some.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
1) remove wildcard imports and use explicit imports
2) refactor to use shared variables from Common/DataType
3) rename to not shadow imports
4) don't assign a variable in a loop (just do final assignment)
5) remove spaces, parens, unused or commented out code, etc.
6) merge unnecessary parent classes into child
7) refactor to share DXE and PEI apriori GUIDs from one place
this includes changes to Build and EOT files
8) for PEP8, dont use __ for custom methods.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob C Feng <bob.c.feng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1265
FSP should not override IDT table when it is initialized
by boot loader. IDT should be re-initialized in FSP only
when it is invalid.
To mitigate temporary memory usage a PCD
PcdFspMaxInterruptSupported created for platform to decide
how many interrupts the FSP IDT table can support.
Test: Verified on internal platform and boots successfully.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Desimone Nathaniel L <nathaniel.l.desimone@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
.nasm source file may include some header files.
header file should be listed in Makefile as .nasm source file
dependency.
But now, BaseTools doesn't find them and list them in Makefile.
This is a missing, because original ASM file supports it.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
original we get the VPD PCD items from the VPDGuid.map file in the FV
output folder. but this logic doesn't work when 1) there only have
single non Default SKU, 2) there have multiple SKU with same value.
Now we change it to get the really VPD Pcd items that already display
in the PCD section of the report.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V2: remove the not used parameter i
Fix the bug for Pcd used in command line not override the Pcd used
in the [component] driver's sub-section.
Case:
DSC file:
[PcdsFixedAtBuild]
TokenSpaceGuid.PcdTest
[Components]
TestPkg/TestDriver.inf {
<PcdsFixedAtBuild>
TokenSpaceGuid.PcdTest|"b"
}
build command with --pcd TokenSpaceGuid.PcdTest="AAAABB"
Then we found the Pcd value in the AutoGen.c file is incorrect,
because of the incorrect logic that use the pcd in the [component]
section to re-override it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1260
For the PassThru() service of NVM Express Pass Through Protocol, the
current implementation (function NvmExpressPassThru()) will only use the
IO Completion/Submission queues created internally by this driver during
the controller initialization process. Any other IO queues created will
not be consumed.
So the value is little to accept external IO Completion/Submission queue
creation request. This commit will refine the behavior of function
NvmExpressPassThru(), it will only accept driver internal IO queue
creation commands and will return "EFI_UNSUPPORTED" for external ones.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1259
According to the the NVM Express spec Revision 1.1, for some commands,
command-related information will be stored in the Dword 0 of the
completion queue entry.
One case is for the Get Features Command (Section 5.9.2 of the spec),
Dword 0 of the completion queue entry may contain feature information.
Hence, this commit will always copy the content of completion queue entry
to the PassThru packet regardless of the execution result of the command.
Cc: Liangcheng Tang <liangcheng.tang@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1142
According to the the NVM Express spec Revision 1.1, for some commands
(like Get/Set Feature Command, Figure 89 & 90 of the spec), the Memory
Buffer maybe optional although the command opcode indicates there is a
data transfer between host & controller (Get/Set Feature Command, Figure
38 of the spec).
Hence, this commit refine the checks for the 'TransferLength' and
'TransferBuffer' field of the EFI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET
structure to address this issue.
Cc: Liangcheng Tang <liangcheng.tang@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1272
To have high confidence in usage for platform, add option (BIT2 of
PcdVTdPolicyPropertyMask) to force no IOMMU access attribute request
recording before DMAR table is installed.
Check PcdVTdPolicyPropertyMask BIT2 before RequestAccessAttribute()
and ProcessRequestedAccessAttribute(), then RequestAccessAttribute(),
ProcessRequestedAccessAttribute() and mAccessRequestXXX variables
could be optimized by compiler when PcdVTdPolicyPropertyMask BIT2 = 1.
Test done:
1: Created case that has IOMMU access attribute request before DMAR
table is installed, ASSERT was triggered after setting
PcdVTdPolicyPropertyMask BIT2 to 1.
2. Confirmed RequestAccessAttribute(), ProcessRequestedAccessAttribute()
and mAccessRequestXXX variables were optimized by compiler after
setting PcdVTdPolicyPropertyMask BIT2 to 1.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
PcdValueInit tool is platform scope.
It should be generated into Platform output directory.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob C Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The current code handle all the structure pcds
even if there is no module or library use them.
This patch is going to filter out the unused structure pcds.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PcdValueInit tool is Arch independent, the Arch specific
build options should be removed from PcdValueInit makefile.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob C Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
For void* type pcd in command line, if its value is string, code should
not convert the void* pcd string in command line to array, otherwise it
will make the pcd value in report not match its real raw value.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
For structure PCD in fdf file and command line,
1. use compiler time assert to check the array index, report error
if array index exceeds the array number.
2. use compiler time assert to check the array size, report error
if the user declared size in header file is smaller than the user
used in fdf file and command line.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1243
AcpiExp text device path: AcpiExp(HID,CID,UIDSTR)
And according to UEFI spec, the CID parameter is optional
and has a default value of 0. But current implementation
miss to check following cases for the AcpiExp.
FromText:when text device is AcpiExp(HID,,UIDSTR)/AcpiExp(HID,0,UIDSTR)
ToText: when the CID is 0 in the node structure
This commit is to do the enhancement.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1243
According to UEFI spec,
for the Messaging Device Path with USB Class SubType, some paras
are optional in the text device path.
Take UsbClass(VID,PID,Class,SubClass,Protocol) for example,
The VID is an integer between 0 and 65535 and is optional. The
default value is 0xFFFF.
The PID is an integer between 0 and 65535 and is optional. The
default value is 0xFFFF.
The Class is an integer between 0 and 255 and is optional. The
default value is 0xFF.
The SubClass is an integer between 0 and 255 and is optional. The
default value is 0xFF.
The Protocol is an integer between 0 and 255 and is optional. The
default value is 0xFF.
So if any the optional para is not specified in the text device,
we should set related para in the node structure to default value.
This commit is to do the enhancement for USB Class device path
when optional para is not specified
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Replace multiple, consecutive "\" characters prior to other processing
involving "\" characters. This fixes an issue where "\\..\\..",
"//..//..", and similar input paths are not cleaned properly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@Intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This is a fix for a double cluster allocation when the disk is full.
The double allocation happens because FatGrowEof calls
FatAllocateCluster without immediately marking the each returned
cluster as allocated. The fix is to move the FatSetFatEntry call
inside the loop.
I've also include some improvements to the sanity checks that I added
while tracking this down. They are optional.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Herbie Robinson <Herbie.Robinson@stratus.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1236
When "dmem" runs without additional arguments, it dumps the memory
content of EFI_SYSTEM_TABLE. But today's implementation dumps 512
bytes. It's not correct because sizeof (EFI_SYSTEM_TABLE) is less
than 512, the 512-read causes page fault exception in a heap-guard
enabled environment.
The patch changes the implementation to only dump
sizeof (EFI_SYSTEM_TABLE) bytes for gST.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jim Dailey <jim_dailey@.com>
Commit e59db6a732
* MdeModulePkg/UsbMass: Merge UsbBoot(Read|Write)Blocks(16)
introduces a bug that causes writing to USB key always fails.
When that patch is verified, only reading was verified.
The root cause is when the writing operation is performed,
the data direction EfiUsbDataIn is wrongly used. Instead, it
should be EfiUsbDataOut.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The tool now can detect the error that the content between double
quotes contains another double quotes or enter key.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Change the criteria of the checkpoint of "#ifndef" to remove the requirement of prefix '_'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1255
For function ReadFile():
If the line
Status = GetAedAdsData (
...
);
is reached multiple times during the 'for' loop, freeing the data pointed
by variable 'Data' may potentially lead to variable 'Ad' referencing the
already-freed data.
After calling function GetAllocationDescriptor(), 'Data' and 'Ad' may
point to the same memory (with some possible offset). Hence, this commit
will move the FreePool() call backwards to ensure the data will no longer
be used.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Acked-by: Star Zeng <star.zeng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1254
This commit will add an additional check within function GetPdFromLongAd()
when getting a Partition Descriptor from given a Long Allocation
Descriptor.
According to UDF 2.60 Spec, Section 2.2.13:
> The partition reference numbers used are determined by the order of the
> Partition Maps in the LVD.
(Also the picture comes before the above contents)
And a more detailed explanation of the partition reference numbers is at
https://sites.google.com/site/udfintro/ (seems not a formal documentation
though), Section 5.3.6.
Based on the above findings, the 'PartitionReferenceNumber' field in a
Long Allocation Descriptor is used as an index to access the Partition
Maps data within a Logical Volume Descriptor.
Hence, the new check focuses on the validity of this
'PartitionReferenceNumber' field in a Long Allocation Descriptor. Since
the current implementation of UdfDxe driver supports only one partition on
a Logical Volume, so the value of 'PartitionReferenceNumber' should be 0.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Acked-by: Star Zeng <star.zeng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1252
Calling the 'SetPosition' service of the EFI_FILE_PROTOCOL with 'Position'
equals to 0xFFFFFFFFFFFFFFFF for a file is to set the current position to
the end of the file. But the current implementation of function
UdfSetPosition() is to set it to the last byte (not EOF).
This commit will resolve this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Acked-by: Star Zeng <star.zeng@intel.com>
Current hard code Usb2Hc.XXXRevision may be not accurate.
This patch updates code to assign Usb2Hc.XXXRevision based on
SBRN (Serial Bus Release Number, PCI configuration space offset
0x60) although there is no code consuming them.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Because of we newly add the PcdFieldValueFromComm and
PcdFieldValueFromFdf in early parser phase, so in the report we use
the saved value in this two variables to print it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1262
Current implementation of BaseLib APIs:
AsciiStrToUnicodeStr()
AsciiStrToUnicodeStrS()
AsciiStrnToUnicodeStrS()
do not handle EASCII properly.
More specifically, if the value of ASCII character is larger than 0x7F,
then the converted Unicode character will have all '1's in the higher 8
bits.
An example:
0xC9 => 0xFFC9 (current implementations)
and it should be:
0xC9 => 0x00C9
This commit will address this issue.
Cc: Bin.Lain <bin_601@mail2000.com.tw>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V2:
Fixed 3 typo.
Use startswith(('L"',"L'")) to check if a string is Unicode string.
Use a set PcdValueTypeSet instead of a list PcdValueTypeList to save
memory.
V1:
For the same one VOID* pcd, if the default value type of one SKU is
"Unicode string", the other SKUs are "OtherVOID*"(ASCII string or
byte array),Then convert "Unicode string" to "byte array".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
V2:
Make the code of patch both compatible for Python2 and Python3.
V1:
If different PCDs refer to the same EFI variable, then do EFI variable
combination, according to the VariableOffset of different PCDS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Because MSR has scope attribute, driver has no needs to set
MSR for all APs if MSR scope is core or package type. This patch
updates code to base on the MSR scope value to add MSR to the register
table.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
V4 changes:
1. Serial console log for different threads when program register table.
2. Check the AcpiCpuData before use it to avoid potential ASSERT.
V3 changes:
1. Use global variable instead of internal function to return string for register type
and dependence type.
2. Add comments for some complicated logic.
V1 changes:
Because this driver needs to set MSRs saved in normal boot phase, sync
semaphore logic from RegisterCpuFeaturesLib code which used for normal boot phase.
Detail see below change for RegisterCpuFeaturesLib:
UefiCpuPkg/RegisterCpuFeaturesLib: Add logic to support semaphore type.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
V4 changes include:
1. Serial debug message for different threads when program the register table.
V3 changes include:
1. Use global variable instead of internal function to return string for register type
and dependence type.
2. Add comments for some complicated logic.
V2 changes include:
1. Add more description for the code part which need easy to understand.
2. Refine some code base on feedback for V1 changes.
V1 changes include:
In a system which has multiple cores, current set register value task costs huge times.
After investigation, current set MSR task costs most of the times. Current logic uses
SpinLock to let set MSR task as an single thread task for all cores. Because MSR has
scope attribute which may cause GP fault if multiple APs set MSR at the same time,
current logic use an easiest solution (use SpinLock) to avoid this issue, but it will
cost huge times.
In order to fix this performance issue, new solution will set MSRs base on their scope
attribute. After this, the SpinLock will not needed. Without SpinLock, new issue raised
which is caused by MSR dependence. For example, MSR A depends on MSR B which means MSR A
must been set after MSR B has been set. Also MSR B is package scope level and MSR A is
thread scope level. If system has multiple threads, Thread 1 needs to set the thread level
MSRs and thread 2 needs to set thread and package level MSRs. Set MSRs task for thread 1
and thread 2 like below:
Thread 1 Thread 2
MSR B N Y
MSR A Y Y
If driver don't control execute MSR order, for thread 1, it will execute MSR A first, but
at this time, MSR B not been executed yet by thread 2. system may trig exception at this
time.
In order to fix the above issue, driver introduces semaphore logic to control the MSR
execute sequence. For the above case, a semaphore will be add between MSR A and B for
all threads. Semaphore has scope info for it. The possible scope value is core or package.
For each thread, when it meets a semaphore during it set registers, it will 1) release
semaphore (+1) for each threads in this core or package(based on the scope info for this
semaphore) 2) acquire semaphore (-1) for all the threads in this core or package(based
on the scope info for this semaphore). With these two steps, driver can control MSR
sequence. Sample code logic like below:
//
// First increase semaphore count by 1 for processors in this package.
//
for (ProcessorIndex = 0; ProcessorIndex < PackageThreadsCount ; ProcessorIndex ++) {
LibReleaseSemaphore ((UINT32 *) &SemaphorePtr[PackageOffset + ProcessorIndex]);
}
//
// Second, check whether the count has reach the check number.
//
for (ProcessorIndex = 0; ProcessorIndex < ValidApCount; ProcessorIndex ++) {
LibWaitForSemaphore (&SemaphorePtr[ApOffset]);
}
Platform Requirement:
1. This change requires register MSR setting base on MSR scope info. If still register MSR
for all threads, exception may raised.
Known limitation:
1. Current CpuFeatures driver supports DXE instance and PEI instance. But semaphore logic
requires Aps execute in async mode which is not supported by PEI driver. So CpuFeature
PEI instance not works after this change. We plan to support async mode for PEI in phase
2 for this task.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
v3 changes:
1. Move CPU_FEATURE_DEPENDENCE_TYPE definition here from RegisterCpuFeaturesLib.h file.
2. Add Invalid type for REGISTER_TYPE which will be used in code.
v2 changes:
1. Add more description about why we do this change.
2. Change structure field type from pointer to EFI_PHYSICAL_ADDRESS because it will
be share between PEI and DXE.
v1 Changes:
In order to support semaphore related logic, add new definition for it.
In a system which has multiple cores, current set register value task costs huge times.
After investigation, current set MSR task costs most of the times. Current logic uses
SpinLock to let set MSR task as an single thread task for all cores. Because MSR has
scope attribute which may cause GP fault if multiple APs set MSR at the same time,
current logic use an easiest solution (use SpinLock) to avoid this issue, but it will
cost huge times.
In order to fix this performance issue, new solution will set MSRs base on their scope
attribute. After this, the SpinLock will not needed. Without SpinLock, new issue raised
which is caused by MSR dependence. For example, MSR A depends on MSR B which means MSR A
must been set after MSR B has been set. Also MSR B is package scope level and MSR A is
thread scope level. If system has multiple threads, Thread 1 needs to set the thread level
MSRs and thread 2 needs to set thread and package level MSRs. Set MSRs task for thread 1
and thread 2 like below:
Thread 1 Thread 2
MSR B N Y
MSR A Y Y
If driver don't control execute MSR order, for thread 1, it will execute MSR A first, but
at this time, MSR B not been executed yet by thread 2. system may trig exception at this
time.
In order to fix the above issue, driver introduces semaphore logic to control the MSR
execute sequence. For the above case, a semaphore will be add between MSR A and B for
all threads. Semaphore has scope info for it. The possible scope value is core or package.
For each thread, when it meets a semaphore during it set registers, it will 1) release
semaphore (+1) for each threads in this core or package(based on the scope info for this
semaphore) 2) acquire semaphore (-1) for all the threads in this core or package(based
on the scope info for this semaphore). With these two steps, driver can control MSR
sequence. Sample code logic like below:
//
// First increase semaphore count by 1 for processors in this package.
//
for (ProcessorIndex = 0; ProcessorIndex < PackageThreadsCount ; ProcessorIndex ++) {
LibReleaseSemaphore ((UINT32 *) &SemaphorePtr[PackageOffset + ProcessorIndex]);
}
//
// Second, check whether the count has reach the check number.
//
for (ProcessorIndex = 0; ProcessorIndex < ValidApCount; ProcessorIndex ++) {
LibWaitForSemaphore (&SemaphorePtr[ApOffset]);
}
Platform Requirement:
1. This change requires register MSR setting base on MSR scope info. If still register MSR
for all threads, exception may raised.
Known limitation:
1. Current CpuFeatures driver supports DXE instance and PEI instance. But semaphore logic
requires Aps execute in async mode which is not supported by PEI driver. So CpuFeature
PEI instance not works after this change. We plan to support async mode for PEI in phase
2 for this task.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1251
*v2: Correct the type of parameters in Ikev2ParseProposalData(), and refined
the corresponding description.
IpSecDxe failed to create the Child SA during parsing SA Payload, the issue
was caused by the below commit:
SHA-1: 1e0db7b119
* MdeModulePkg/NetworkPkg: Checking for NULL pointer before use.
In above commit, it changed the value of IsMatch in Ikev2ChildSaParseSaPayload()
to FALSE. That's correct but it exposed the potential bug in to match the correct
proposal Data, which will cause the issue happen.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The case is:
in the DSC file:
SKUID_IDENTIFIER = ALL
[SkuIds]
0|DEFAULT
1|A
[PcdsFixedAtBuild.common.A]
TokenSpaceGuid.Test401|{0x0F, 0x12}
TokenSpaceGuid.Test401.TEST401INT8ARRAY[0]|'B'
in the build report, Data = OverrideValues[Keys[0]], but the Keys[0]
is the keyword "DEFAULT", and in this case the "DEFAULT" SKU doesn't
save any value, then it cause the Data is empty, in the next code
when we use the code it cause crash.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The case is use Dynamic structure Pcd in the FDF file.
Current code already save the Guid, Name and Filed info for those Pcd,
but it directly use the dict key as [Name, Guid] and cause this crash
issue.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=1264
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
the bug is PcdValueFromComm is not set, but the Pcd have been override
by the command line option.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1266af5e952159 abstracted generic functions
from different modules (IntelVTdDxe, S3SaveStateDxe, PcRtc,
DpDynamicCommand and PiSmmCpuDxeSmm). Some of them (IntelVTdDxe and
PcRtc) checked Table against NULL before accessing Table->Signature,
some (S3SaveStateDxe, DpDynamicCommand and PiSmmCpuDxeSmm did not.
The ScanTableInSDT() in Acpi.c of UefiLib was mainly from
S3SaveStateDxe, so it does not check Table against NULL before
accessing Table->Signature.
This patch updates ScanTableInSDT() to check Table against NULL first
before accessing Table->Signature.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1241
Add support for both API (original mode) and DISPATCH mode:
1. Add FspMode field from reserved byte of Global
Data Structure to tell which mode is selected by boot
loader. If boot loader invoking FSP-M API this field
will remain as default 0 (API mode), otherwise platform
FSP should set this field to 1 (Dispatch mode) when
initializing Global Data Structure.
2. gFspInApiModePpiGuid will be instaled when FSP running in API
mode and modules only for API mode should have this in depex.
3. If it is DISPATCH mode, FSP will return to PEI dispatcher,
not directly return to boot loader.
4. DISPATCH mode supports DXE NotifyPhase drivers so FSP
will not wait for PEI NotifyPhase callbacks, instead it
will install gFspReadyForNotifyPhasePpiGuid PPI for
platform to complete late initialization before transferring
to DXE.
Test: Verified FSP API and DISPATCH modes on 2 internal
platforms and both boot successfully.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Desimone Nathaniel L <nathaniel.l.desimone@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
This change is to pass static analysis.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In the expression for unicode string and general string compare, it
should check whether it startswith "L'" or 'L"', but not "L".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
the case is:
in the DSC:
[PcdsFixedAtBuild.common]
TokenSpaceGuid.TestFixedPcd|0xFFEAA000
[PcdsDynamicExDefault.common.DEFAULT]
!if TokenSpaceGuid.PcdFlag == TRUE
TokenSpaceGuid.PcdTest|TokenSpaceGuid.TestFixedPcd
!endif
Then build with --pcd TokenSpaceGuid.PcdFlag=TRUE, it report failure,
but if we build without this --pcd option, it could build success.
we found when the --pcd is enabled, the fixedatbuild pcds are not be
collected into expression to calculate.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=1256
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1249
We found potential dead codes within File.c during the code coverage test.
After manual review, we think the below ones are positive reports:
A. For function GetAllocationDescriptor():
Due to the all the calling places for this function, the input parameter
'RecordingFlags' can only with value 'LongAdsSequence' or
'ShortAdsSequence'. Moreover, this is also mentioned in the function
description comments for GetAllocationDescriptor().
So the below code will never be reached:
return EFI_DEVICE_ERROR;
This commit will add "ASSERT (FALSE);" before the above line to indicate
this and thus matching the function description comments.
B. For function GetAllocationDescriptorLsn():
Due to the all the calling places for this function, the input parameter
'RecordingFlags' can only with value 'LongAdsSequence' or
'ShortAdsSequence'. Moreover, this is also mentioned in the function
description comments for GetAllocationDescriptorLsn().
So the below code will never be reached:
return EFI_UNSUPPORTED;
This commit will add "ASSERT (FALSE);" before the above line to indicate
this and thus matching the function description comments.
Cc: Paulo Alcantara <palcantara@suse.de>
Cc: Paulo Alcantara <paulo@paulo.ac>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1249
We found potential dead codes within File.c during the code coverage test.
After manual review, we think the below ones are positive reports:
A. In function UdfRead():
else if (IS_FID_DELETED_FILE (Parent->FileIdentifierDesc)) {
Status = EFI_DEVICE_ERROR;
}
A File Identifier Descriptor will be get from the UDF media only by
function ReadDirectoryEntry(). And within this function, all the File
Identifier Descriptor with 'DELETED_FILE' characteristics will be skipped
and will not be returned. Hence, the above codes in function UdfRead()
will never be hit.
This commit will add "ASSERT (FALSE);" before the above line to indicate
this.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1248
This commit will refine the ASSERTs in function GetLongAdLsn() and
GetAllocationDescriptorLsn() when the logical sector number cannot be
returned due to unrecognized media format.
Error handling logic will be used for those ASSERTs.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This commit adds ASSERTs to address false positive reports of NULL
pointer dereference issues raised from static analysis with regard to
function ReadDirectoryEntry().
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Star Zeng <star.zeng@intel.com>
(This patch is identical to the X64 half of the last one, except for the
InternalSyncCompareExchange32() -> InternalSyncCompareExchange64() and
"cmpxchgl" -> "cmpxchgq" replacements.)
The CMPXCHG instruction has the following operands:
- AX (implicit, CompareValue): input and output
- destination operand (*Value): input and output
- source operand (ExchangeValue): input
The X64 version of InternalSyncCompareExchange64() attempts to mark both
CompareValue and (*Value) as input/output, but it doesn't use the
appropriate constraints for either operand.
Fix these issues. Furthermore, prefer the short "+" constraint for I/O
operands over the <output-operand-number> constraint that can be applied
to the input instances of I/O operands.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1208
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(This patch is identical to the last one, except for the
InternalSyncCompareExchange16() -> InternalSyncCompareExchange32() and
"cmpxchgw" -> "cmpxchgl" replacements.)
The CMPXCHG instruction has the following operands:
- AX (implicit, CompareValue): input and output
- destination operand (*Value): input and output
- source operand (ExchangeValue): input
The IA32 version of InternalSyncCompareExchange32() correctly marks
CompareValue as input/output, but it marks (*Value) only as input.
The X64 version of InternalSyncCompareExchange32() attempts to mark both
CompareValue and (*Value) as input/output, but it doesn't use the
appropriate constraints for either operand.
Fix these issues. Furthermore, prefer the short "+" constraint for I/O
operands over the <output-operand-number> constraint that can be applied
to the input instances of I/O operands.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1208
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The CMPXCHG instruction has the following operands:
- AX (implicit, CompareValue): input and output
- destination operand (*Value): input and output
- source operand (ExchangeValue): input
The IA32 version of InternalSyncCompareExchange16() correctly marks
CompareValue as input/output, but it marks (*Value) only as input.
The X64 version of InternalSyncCompareExchange16() attempts to mark both
CompareValue and (*Value) as input/output, but it doesn't use the
appropriate constraints for either operand.
Fix these issues. Furthermore, prefer the short "+" constraint for I/O
operands over the <output-operand-number> constraint that can be applied
to the input instances of I/O operands.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1208
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=415
When SetVariable() to a time based auth variable with APPEND_WRITE
attribute, and if the EFI_VARIABLE_AUTHENTICATION_2.TimeStamp in
the input Data is earlier than current value, it will cause timestamp
zeroing.
This issue may bring time based auth variable downgrade problem.
For example:
A vendor released three certs at 2014, 2015, and 2016, and system
integrated the 2016 cert. User can SetVariable() with 2015 cert and
APPEND_WRITE attribute to cause timestamp zeroing first, then
SetVariable() with 2014 cert to downgrade the cert.
This patch fixes this issue.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Per USB HID spec, the buffer holding key codes should at least 3-byte
long.
Today's code assumes that the key codes buffer length is longer than
3-byte and unconditionally accesses the key codes buffer.
It's incorrect.
The patch fixes the issue by returning Device Error when the
length is less than 3-byte.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Per USB HID spec, the buffer holding key codes should at least 3-byte
long.
Today's code assumes that the key codes buffer length is longer than
3-byte and unconditionally accesses the key codes buffer.
It's incorrect.
The patch fixes the issue by returning Device Error when the
length is less than 3-byte.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Per USB HID spec, the buffer holding key codes should be 8-byte
long.
Today's code assumes that the key codes buffer length is 8-byte
long and unconditionally accesses the key codes buffer.
It's incorrect.
The patch fixes the issue by returning Device Error when the
length is less than 8-byte.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Today's implementation doesn't check whether the length of
descriptor is valid before using it.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Today's implementation reads the Type/Length field in the USB
descriptors data without checking whether the offset to read is
beyond the data boundary.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
UsbBootReadWriteBlocks() and UsbBootReadWriteBlocks16() use a UINT16
local variable to hold the value of
USB_BOOT_MAX_CARRY_SIZE (=0x10000) / BlockSize.
When BlockSize is 1, the UINT16 local variable is set to 0x10000
but the high-16 bits are truncated resulting the final value be 0.
It causes the while-loop in the two functions accesses 0 block in
each loop, resulting the loop never ends.
The patch fixes the two functions to make sure no integer overflow
happens.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The change doesn't have functionality impact.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Update the EOT tool to call the program itself instead of calling the Python API when parsing FV images.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Acked-by: Jaben Carsey <jaben.carsey@intel.com>
Original it hard code to use "VOID*", this patch extend it to both
support VOID* and valid struct name.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Relational and equality operators require both operands to be of
the same type.
Treat the string 'A' and "A" as same type, but for "A" and L"A"
are not same type since one is general string, another is unicode
string.
True:'A'<'B', "A"<"B" 'A'<"B", L'A'<L'B', L"A"<L"B", L'A'<L"B"
Error:'A'<L'B', 'A'<L"B", "A'<L'B'
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
For void* type pcd in command line, if its value is string, then
convert the string value to array format. For example,
build --pcd gUefiOvmfPkgTokenSpaceGuid.PcdTest="c",
convert the pcd value from "c" to "{0x63,0x00}".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V3:
Update the error message for array checker.
V2:
1. Add comments for each ASSERT.
2. ASSERT need to skip the case of array size of array as zero. For
example, TestArray[] in struct in header file.
V1:
For structure PCD,
1. use compiler time assert to check the array index, report error
if array index exceeds the array number.
2. use compiler time assert to check the array size, report error
if the user declared size in header file is smaller than the user
defined in DEC/DSC file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BrotliCustomDecompressLib has the definition with float type. But,
Floating-point types are not supported by EBC compiler.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Bi Dandan <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Set macro for variable arguments, and remove the hard code definition
to avoid the potential duplicated definition.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Dongao Guo <dongao.guo@intel.com>
There are five check not necessary in logic ,just for pass static
analysis. More detail please refer to comment in code.
And the rest changes are all accepted by owner, they are reasonable.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dongao Guo <dongao.guo@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add one new option --uefi to enable UefiCompress.
(re-add this patch since it be reverted in Python3 migration patches,
but this patch is not related with Python3)
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Cover the case:
1.only define the structure Pcd in DEC file, it should not have any
Flag.
2.In the DEC file and DSC file only have the PCD's default value, and
without the field value, it should have *P Flag.
(re-add this patch since it be reverted in Python3 migration patches,
but this patch is not related with Python3)
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
the PyUtility is not used, so we remove it.
(re-add this patch since it be reverted in Python3 migration patches,
but this check is not related with Python3)
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V5:
1. Add ASSERT to indicate this assumption that environment is 32 bit mode.
2. Add description in INF about this driver's expected result
in different environment.
V4:
Only disable paging when it is enabled.
V3 changes:
No need to change inf file.
V2 changes:
Only disable paging in 32 bit mode, no matter it is enable or not.
V1 changes:
PEI Stack Guard needs to enable paging. This might cause #GP if code
trying to write CR3 register with PML4 page table while the processor
is enabled with PAE paging.
Simply disabling paging before updating CR3 can solve this conflict.
It's an regression caused by change: 0a0d5296e4
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1232
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
This reverts commit 6693f359b3c213513c5096a06c6f67244a44dc52..
678f851312.
Python3 migration is the fundamental change. It requires every developer
to install Python3. Before this migration, the well communication and wide
verification must be done. But now, most people is not aware of this change,
and not try it. So, Python3 migration is reverted and be moved to edk2-staging
Python3 branch for the edk2 user evaluation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
For structure Pcd, the type defined in the DEC file is the struct name
while if this Pcd used in the DSC file, it should add VOID* keywords
when it have max size info. so this patch filter the type compare for
this case.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cover the case:
1.only define the structure Pcd in DEC file, it should not have any
Flag.
2.In the DEC file and DSC file only have the PCD's default value, and
without the field value, it should have *P Flag.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. Add Python 3 support on ECC and EOT tools
2. Add C grammar file of ANTLR4 and fix some bugs
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. increment build not skip make file when not change any file
2. report file generate abundant blank line
3. Build encounter Database is locked on some platform, using database
auto commit
4. Fv BaseAddress must have if set
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PEP 238 -- Changing the Division Operator
x/y to return a reasonable approximation of the mathematical result
of the division ("true division")
x//y to return the floor ("floor division")
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Updated Redistributor base calculation to allow for the fact that
GICv4 has 2 additional 64KB frames (for VLPI and a reserved frame).
The code now tests the VLPIS bit in the GIC Redistributor Type
Register (GICR_TYPER) and calculates the Redistributor granularity
accordingly.
The code changes are:
GICR_TYPER register fields, etc, added to the header.
Loop updated to pay attention to GICR_TYPER.Last.
Derive frame "stride" size from GICR_TYPER.VLPIS.
Note: The assumption is that the redistributors are adjacent for
all CPUs. However this may not be the case for NUMA systems.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Clock control is similar in SDHCI versions greater then version 2. Add
support for more recent versions of the controller specification.
SD card support for 1.8V is also present in controller versions 3 and
greater.
https://bugzilla.tianocore.org/show_bug.cgi?id=1233
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Add SDHCI controller defines, this is useful as the version in the
register does not explictly map to a specification version. For example
vesion 4.10 of the specification is version 0x04.
https://bugzilla.tianocore.org/show_bug.cgi?id=1233
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1229
When converting DebugPort device path from text,
current code use VENDOR_DEFINED_MESSAGING_DEVICE_PATH structure
for Debug port device node.
typedef struct {
EFI_DEVICE_PATH_PROTOCOL Header;
EFI_GUID Guid;
UINT8 VendorDefinedData[1];
} VENDOR_DEFINED_MESSAGING_DEVICE_PATH;
And Debugport Device Path is a vendor-defined messaging
device path with no data, only a GUID. So it's better to
use VENDOR_DEVICE_PATH to create the Debug port device node.
typedef struct {
EFI_DEVICE_PATH_PROTOCOL Header;
EFI_GUID Guid;
} VENDOR_DEVICE_PATH;
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
ShellPkg-Cd: Ensure all valid cd targets are handled properly
Make sure that PathCleanUpDirectories() is called on all valid targets
of the cd command.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
MdePkg-BaseLib: Fix PathCleanUpDirectories() error involving "\..\.."
The loop that removes "xxxx\..\" errs when multiple "\.." sequences are
in the path. Before this change the code would modify a path like
"FS0:\efi\tools\..\.." to "FS0:\efi\\.." and then to "FS0:\efi\", but
the correct path is "FS0:\".
You can test the effect of this change in the shell by setting the
current directory to something like FS0:\efi\boot and then executing
the command "ls ..\..". Before the change you will see the files in
the FS0:\efi directory; after the change, you will see the files in
the root directory of FS0:.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
There are three warnings reported by GCC 4.8 and the later GCC release
are workaround with them.
And all the three warnings are invalid,so I just disable warnings rather
than fix them at now.
Following is the analysis from Laszlo Ersek.
(1)
> MdeModulePkg/Universal/RegularExpressionDxe/Oniguruma/regcomp.c: In
> function 'compile_length_tree':
> MdeModulePkg/Universal/RegularExpressionDxe/Oniguruma/regcomp.c:1516:7:
> warning: 'len' may be used uninitialized in this function
> [-Wmaybe-uninitialized]
> int len;
> ^
I think this is an invalid warning; the type of the controlling expression
(node->type) is enum GimmickType, and the case labels cover all values of
the enum. An assert(0) could be added, I guess, but again, upstream
Oniguruma would be justified to reject the idea.
(2)
> MdeModulePkg/Universal/RegularExpressionDxe/Oniguruma/regparse.c: In
> function 'parse_callout_args.isra.10.constprop.30':
> MdeModulePkg/Universal/RegularExpressionDxe/Oniguruma/regparse.c:6753:25:
> warning: 'rl' may be used uninitialized in this function
> [-Wmaybe-uninitialized]
> vals[n].l = rl;
> ^
This warning is invalid, given:
6749 if (cn > 0) {
6750 long rl;
6751 r = parse_long(enc, buf, bufend, 1, LONG_MAX, &rl);
6752 if (r == ONIG_NORMAL) {
6753 vals[n].l = rl;
Because parse_long() only returns ONIG_NORMAL after it sets (*rl).
(3)
> MdeModulePkg/Universal/RegularExpressionDxe/Oniguruma/regparse.c: In
> function 'parse_callout_of_name.constprop.29':
> MdeModulePkg/Universal/RegularExpressionDxe/Oniguruma/regparse.c:6861:38:
> warning: 'tag_end' may be used uninitialized in this function
> [-Wmaybe-uninitialized]
> if (! is_allowed_callout_tag_name(enc, tag_start, tag_end))
This warning is also invalid, given:
6852 if (c == '[') {
6853 if (PEND) return ONIGERR_END_PATTERN_IN_GROUP;
6854 tag_start = p;
6855 while (! PEND) {
6856 if (PEND) return ONIGERR_END_PATTERN_IN_GROUP;
6857 tag_end = p;
6858 PFETCH_S(c);
6859 if (c == ']') break;
6860 }
6861 if (! is_allowed_callout_tag_name(enc, tag_start, tag_end))
6862 return ONIGERR_INVALID_CALLOUT_TAG_NAME;
6863
To see that, first we should note:
#define PEND (p < end ? 0 : 1)
therefore PEND doesn't change if neither "p" nor "end" change.
Second, when we reach line 6855 (the "while") for the very first time,
(!PEND) is certainly true (i.e., PEND is false), because otherwise we
would have bailed at line 6853. Therefore we reach line 6857, and assign
"tag_end". Regardless of whether we iterate zero or more *additional*
times around the loop, "tag_end" will have been set, whenever we reach
line 6861.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dongao Guo <dongao.guo@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Currently, the implementation of EFI_PCI_IO_PROTOCOL::GetLocation()
in NonDiscoverablePciDeviceDxe returns the same set of dummy values
for each instance of the NON_DISCOVERABLE_DEVICE protocol that it
attaches itself to. However, this turns out to be causing problems
in cases where software (such as the ARM Compliance Test Suite [ACS])
attempts to use these values to uniquely identify controllers, since
the collisions create ambiguity in this regard.
So let's modify GetLocation() to return an arbitrary bus/device tuple
on segment 0xff instead. This is guaranteed not to clash with other
non-discoverable PCI devices, and highly unlikely to clash with real
PCIe devices.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1228
According to UEFI spec,for ACPI Expanded Device Path
when HID=PNP0A03 or CID=PNP0A03 and HID != PNP0A08,
the device path node can be displayed as: PciRoot(UID|UIDSTR)
When HID=PNP0A08 or CID=PNP0A08, the device path node can be
displayed as: PcieRoot(UID|UIDSTR). But current code miss the
code logic.
This commit is to do the enhancement.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1226
According to UEFI Spec, for ACPI Expanded Device Path,
when HIDSTR=empty, CIDSTR=empty, UID STR!=empty,
the ACPI Expanded Device Path node can be displayed as
AcpiExp(HID,CID,UIDSTR) format.
And if UID is 0 and UIDSTR is empty, then use AcpiEx format.
This patch is to correct the condition check to follow UEFI
Spec when convert the device path node to the AcpiExp text
format.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1224
When covert IFR binary to EFI_IFR_CHECKBOX structure,
Current code has following incorrect code logic:
IfrCheckBox = (EFI_IFR_CHECKBOX *) (IfrOpHdr + 1);
The correct one should be:
IfrCheckBox = (EFI_IFR_CHECKBOX *) IfrOpHdr;
1. The bug is in function "UpdateDefaultSettingInFormPackage()"
which is to update the default setting of some HII Questions
in the IFR binary data. So it only has impact when platform
overrides default setting in HII VarStore through DynamicHii
PCD setting in Platform DSC file. If platform doesn't
override default setting, it has no impact.
2. The implementation updates the "Flags" filed in the
EFI_IFR_CHECKBOX structure to update the default
setting of checkbox.
If using "IfrCheckBox = (EFI_IFR_CHECKBOX *) (IfrOpHdr + 1);"
when wants to update the " Flags" filed in checkbox,
but in fact it will update the opcode binary
data(opcode binary length) behind checkbox binary.
And then it will cause Browser can't parse the IFR
binary data correctly. And then the possible symptom
is that some HII Question and forms may be not parsed
and then cannot be shown.
This patch is to fix this bug.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This is for conformance with the TCG "Platform Reset Attack Mitigation
Specification". Because clearing the CPU caches at boot doesn't impact
performance significantly, do it unconditionally, for simplicity's
sake.
Flush the cache on all logical processors, thanks to
EFI_PEI_MP_SERVICES_PPI and CacheMaintenanceLib.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
[lersek@redhat.com: remove bogus Message-Id line from commit msg]
Create a homefilesystem environment variable whose value is the file
system on which the executing shell is located. For example: "FS14:".
This eliminates the need for people to have to try and find the "boot"
file system in their startup script. After this change they can simply
execute %homefilesystem% to set the cwd to the root of the file system
where the shell is located.
A future enhancement could be to add "homefilesystem" to the list of
predefined, read-only variables listed in the EfiShellSetEnv function of
file ShellProtocol.c
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1194
Speculative execution is used by processor to avoid having to wait for
data to arrive from memory, or for previous operations to finish, the
processor may speculate as to what will be executed.
If the speculation is incorrect, the speculatively executed instructions
might leave hints such as which memory locations have been brought into
cache. Malicious actors can use the bounds check bypass method (code
gadgets with controlled external inputs) to infer data values that have
been used in speculative operations to reveal secrets which should not
otherwise be accessed.
It is possible for SMI handler(s) to call EFI_SMM_CPU_PROTOCOL service
ReadSaveState() and use the content in the 'CommBuffer' (controlled
external inputs) as the 'CpuIndex'. So this commit will insert AsmLfence
API to mitigate the bounds check bypass issue within SmmReadSaveState().
For SmmReadSaveState():
The 'CpuIndex' will be passed into function ReadSaveStateRegister(). And
then in to ReadSaveStateRegisterByIndex().
With the call:
ReadSaveStateRegisterByIndex (
CpuIndex,
SMM_SAVE_STATE_REGISTER_IOMISC_INDEX,
sizeof(IoMisc.Uint32),
&IoMisc.Uint32
);
The 'IoMisc' can be a cross boundary access during speculative execution.
Later, 'IoMisc' is used as the index to access buffers 'mSmmCpuIoWidth'
and 'mSmmCpuIoType'. One can observe which part of the content within
those buffers was brought into cache to possibly reveal the value of
'IoMisc'.
Hence, this commit adds a AsmLfence() after the check of 'CpuIndex'
within function SmmReadSaveState() to prevent the speculative execution.
A more detailed explanation of the purpose of commit is under the
'Bounds check bypass mitigation' section of the below link:
https://software.intel.com/security-software-guidance/insights/host-firmware-speculative-execution-side-channel-mitigation
And the document at:
https://software.intel.com/security-software-guidance/api-app/sites/default/files/337879-analyzing-potential-bounds-Check-bypass-vulnerabilities.pdf
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1194
Speculative execution is used by processor to avoid having to wait for
data to arrive from memory, or for previous operations to finish, the
processor may speculate as to what will be executed.
If the speculation is incorrect, the speculatively executed instructions
might leave hints such as which memory locations have been brought into
cache. Malicious actors can use the bounds check bypass method (code
gadgets with controlled external inputs) to infer data values that have
been used in speculative operations to reveal secrets which should not
otherwise be accessed.
This commit will focus on the SMI handler(s) registered within the
Variable\RuntimeDxe driver and insert AsmLfence API to mitigate the
bounds check bypass issue.
For SMI handler SmmVariableHandler():
Under "case SMM_VARIABLE_FUNCTION_GET_VARIABLE:",
'SmmVariableHeader->NameSize' can be a potential cross boundary access of
the 'CommBuffer' (controlled external input) during speculative execution.
This cross boundary access is later used as the index to access array
'SmmVariableHeader->Name' by code:
"SmmVariableHeader->Name[SmmVariableHeader->NameSize/sizeof (CHAR16) - 1]"
One can observe which part of the content within array was brought into
cache to possibly reveal the value of 'SmmVariableHeader->NameSize'.
Hence, this commit adds a AsmLfence() after the boundary/range checks of
'CommBuffer' to prevent the speculative execution.
And there are 2 similar cases under
"case SMM_VARIABLE_FUNCTION_SET_VARIABLE:" and
"case SMM_VARIABLE_FUNCTION_VAR_CHECK_VARIABLE_PROPERTY_GET:" as well.
This commits also handles them.
Also, under "case SMM_VARIABLE_FUNCTION_SET_VARIABLE:",
'(UINT8 *)SmmVariableHeader->Name + SmmVariableHeader->NameSize' points to
the 'CommBuffer' (with some offset) and then passed as parameter 'Data' to
function VariableServiceSetVariable().
Within function VariableServiceSetVariable(), there is a sanity check for
EFI_VARIABLE_AUTHENTICATION_2 descriptor for the data pointed by 'Data'.
If this check is speculatively bypassed, potential cross-boundary data
access for 'Data' is possible to be revealed via the below function calls
sequence during speculative execution:
AuthVariableLibProcessVariable()
ProcessVarWithPk() or ProcessVarWithKek()
Within function ProcessVarWithPk() or ProcessVarWithKek(), for the code
"PayloadSize = DataSize - AUTHINFO2_SIZE (Data);", 'AUTHINFO2_SIZE (Data)'
can be a cross boundary access during speculative execution.
Then, 'PayloadSize' is possible to be revealed by the function call
sequence:
AuthServiceInternalUpdateVariableWithTimeStamp()
mAuthVarLibContextIn->UpdateVariable()
VariableExLibUpdateVariable()
UpdateVariable()
CopyMem()
Hence, this commit adds a AsmLfence() after the sanity check for
EFI_VARIABLE_AUTHENTICATION_2 descriptor upon 'Data' within function
VariableServiceSetVariable() to prevent the speculative execution.
Also, please note that the change made within function
VariableServiceSetVariable() will affect DXE as well. However, since we
only focuses on the SMM codes, the commit will introduce a new module
internal function called VariableLoadFence() to handle this. This internal
function will have 2 implementations (1 for SMM, 1 for DXE). For the SMM
implementation, it is a wrapper to call the AsmLfence() API; for the DXE
implementation, it is empty.
A more detailed explanation of the purpose of commit is under the
'Bounds check bypass mitigation' section of the below link:
https://software.intel.com/security-software-guidance/insights/host-firmware-speculative-execution-side-channel-mitigation
And the document at:
https://software.intel.com/security-software-guidance/api-app/sites/default/files/337879-analyzing-potential-bounds-Check-bypass-vulnerabilities.pdf
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1194
Speculative execution is used by processor to avoid having to wait for
data to arrive from memory, or for previous operations to finish, the
processor may speculate as to what will be executed.
If the speculation is incorrect, the speculatively executed instructions
might leave hints such as which memory locations have been brought into
cache. Malicious actors can use the bounds check bypass method (code
gadgets with controlled external inputs) to infer data values that have
been used in speculative operations to reveal secrets which should not
otherwise be accessed.
This commit will focus on the SMI handler(s) registered within the
SmmLockBox driver and insert AsmLfence API to mitigate the
bounds check bypass issue.
For SMI handler SmmLockBoxHandler():
Under "case EFI_SMM_LOCK_BOX_COMMAND_SAVE:", the 'CommBuffer' (controlled
external inputs) is passed to function SmmLockBoxSave().
'TempLockBoxParameterSave.Length' can be a potential cross boundary access
of the 'CommBuffer' during speculative execution. This cross boundary
access is later passed as parameter 'Length' into function SaveLockBox().
Within function SaveLockBox(), the value of 'Length' can be inferred by
code:
"CopyMem ((VOID *)(UINTN)SmramBuffer, (VOID *)(UINTN)Buffer, Length);".
One can observe which part of the content within 'Buffer' was brought into
cache to possibly reveal the value of 'Length'.
Hence, this commit adds a AsmLfence() after the boundary/range checks of
'CommBuffer' to prevent the speculative execution.
And there is a similar case under "case EFI_SMM_LOCK_BOX_COMMAND_UPDATE:"
function SmmLockBoxUpdate() as well. This commits also handles it.
A more detailed explanation of the purpose of commit is under the
'Bounds check bypass mitigation' section of the below link:
https://software.intel.com/security-software-guidance/insights/host-firmware-speculative-execution-side-channel-mitigation
And the document at:
https://software.intel.com/security-software-guidance/api-app/sites/default/files/337879-analyzing-potential-bounds-Check-bypass-vulnerabilities.pdf
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1194
Speculative execution is used by processor to avoid having to wait for
data to arrive from memory, or for previous operations to finish, the
processor may speculate as to what will be executed.
If the speculation is incorrect, the speculatively executed instructions
might leave hints such as which memory locations have been brought into
cache. Malicious actors can use the bounds check bypass method (code
gadgets with controlled external inputs) to infer data values that have
been used in speculative operations to reveal secrets which should not
otherwise be accessed.
This commit will focus on the SMI handler(s) registered within the
FaultTolerantWriteDxe driver and insert AsmLfence API to mitigate the
bounds check bypass issue.
For SMI handler SmmFaultTolerantWriteHandler():
Under "case FTW_FUNCTION_WRITE:", 'SmmFtwWriteHeader->Length' can be a
potential cross boundary access of the 'CommBuffer' (controlled external
inputs) during speculative execution. This cross boundary access is later
passed as parameter 'Length' into function FtwWrite().
Within function FtwWrite(), the value of 'Length' can be inferred by code:
"CopyMem (MyBuffer + Offset, Buffer, Length);". One can observe which part
of the content within 'Buffer' was brought into cache to possibly reveal
the value of 'Length'.
Hence, this commit adds a AsmLfence() after the boundary/range checks of
'CommBuffer' to prevent the speculative execution.
A more detailed explanation of the purpose of commit is under the
'Bounds check bypass mitigation' section of the below link:
https://software.intel.com/security-software-guidance/insights/host-firmware-speculative-execution-side-channel-mitigation
And the document at:
https://software.intel.com/security-software-guidance/api-app/sites/default/files/337879-analyzing-potential-bounds-Check-bypass-vulnerabilities.pdf
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
The PCDs below are unused, so they have been removed from inf.
gEfiShellPkgTokenSpaceGuid.PcdShellFileOperationSize
gEfiMdePkgTokenSpaceGuid.PcdMaximumUnicodeStringLength
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The PCDs below are unused, so they have been removed from inf.
gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize in DpApp.inf
gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize in
DpDynamicCommand.inf
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The PCDs below are unused, so they have been removed from inf.
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleMax
gEfiMdeModulePkgTokenSpaceGuid.PcdSystemRebootAfterCapsuleProcessFlag
gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeSubClassCapsule
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeProcessCapsulesBegin
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeProcessCapsulesEnd
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdatingFirmware
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdateFirmwareSuccess
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdateFirmwareFailed
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeResettingSystem
The library Pcdlib is not linked， so "#include <Library/PcdLib.h>"
is deleted.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The PCD below is unused, so it has been removed from inf.
gUefiCpuPkgTokenSpaceGuid.PcdCpuFeaturesSupport
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The input param String of AsciiStrStr() requires a pointer to
Null-terminated string, however in HttpUtilitiesParse(),
the Buffersize before AllocateZeroPool() is equal to the size
of TCP header, after the CopyMem(), it might not end with
Null-terminator. It might cause memory access overflow.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1204
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Songpeng Li <songpeng.li@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The input param String of AsciiStrStr() requires a pointer to
Null-terminated string, however in HttpTcpReceiveHeader(),
the Buffersize before AllocateZeroPool() is equal to the size
of TCP header, after the CopyMem(), it might not end with
Null-terminator. It might cause memory access overflow.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1204
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Songpeng Li <songpeng.li@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1212
UPD header files generated by GenCfgOpt.py may have
tailing white space from some of the UPD description in DSC,
especially when python script automatically switching lines
for long description string. This patch will always remove
tailing white space for UPD header files.
Test: Verified the patch can remove tailing space in
output header files when UPD DSC contains intentional
tailing white space.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Gao Liming <liming.gao@intel.com>
Cc: Zhu Yonghong <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1211
For reducing maintenance effort, the UPD offset can be
automatic assigned by GenCfgOpt.py following by alignment
requirements.
The usage model as below:
. If UPD offset in DSC file are all '*', GenCfgOpt.py will
assign offset for all UPD automatically. In this case no
need to manually hardcode offset to all UPD in DSC.
. If UPD offset in DSC file are all not '*', GenCfgOpt.py
will use hardcoded offset directly (original usage model)
. Tool does not support mixing scenario so UPD offset in DSC
should be all '*' or all hardcoded but not mixed.
In auto mode UPD offset will be assigned following natural
alignment (size aligned) rule and the whole structure size
will align to either 32bits or 64bits depends on maximal UPD
size in the structure.
Test: Verified by both UPD offset hardcoded or '*' in DSC and
generated UPD header files are correct.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Gao Liming <liming.gao@intel.com>
Cc: Zhu Yonghong <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1214
This patch only updates comment and function description, so has
no functionality impact.
This patch fixes comment typo 'end' to 'start' in GetStartPointer.
GetStartPointer for PEI and DXE has aligned function description,
but GetEndPointer does not.
This patch also aligns GetEndPointer's function description for
PEI and DXE.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The PCDs below are unused, so they have been removed from inf.
gIntelFsp2PkgTokenSpaceGuid.PcdTemporaryRamBase
gIntelFsp2PkgTokenSpaceGuid.PcdTemporaryRamSize
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
The PCDs below are unused, so they have been removed from inf.
gIntelFsp2PkgTokenSpaceGuid.PcdFspMaxPatchEntry
gIntelFsp2PkgTokenSpaceGuid.PcdFspMaxPerfEntry
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
The PCDs below are unused, so they have been removed from inf.
gIntelFsp2PkgTokenSpaceGuid.PcdFspMaxPatchEntry
gIntelFsp2PkgTokenSpaceGuid.PcdFspMaxPerfEntry
gIntelFsp2PkgTokenSpaceGuid.PcdTemporaryRamBase
gIntelFsp2PkgTokenSpaceGuid.PcdTemporaryRamSize
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Commit formats had issues so reverted 9 commits
from IntelFsp2Pkg and IntelFsp2WrapperPkg.
Will re-submit them with correct formats.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1215
This issue is caused by commit 5267926134.
The reason is this commit changed the condition of building page table
in DxeIpl. The code before it will only build page table for the sake
of PcdSetNxForStack. This commit added PcdImageProtectionPolicy and
PcdDxeNxMemoryProtectionPolicy into the logic. But the default value of
PcdImageProtectionPolicy is 02, which means the DxeIpl should build page
table. Due to the fact that EmulatorPkg doesn't support page table at all,
this will cause exception on Windows OS.
This patch solves this issue by setting PcdImageProtectionPolicy to 0
explicitly in EmulatorPkg.dsc.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1215
This issue is caused by commit 5267926134.
The reason is this commit changed the condition of building page table
in DxeIpl. The code before it will only build page table for the sake
of PcdSetNxForStack. This commit added PcdImageProtectionPolicy and
PcdDxeNxMemoryProtectionPolicy into the logic. But the default value of
PcdImageProtectionPolicy is 02, which means the DxeIpl should build page
table. Due to the fact that Nt32Pkg doesn't support page table at all,
this will cause exception on Windows OS.
This patch solves this issue by setting PcdImageProtectionPolicy to 0
explicitly in Nt32Pkg.dsc.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1212
UPD header files generated by GenCfgOpt.py may have
tailing white space from some of the UPD description in DSC,
especially when python script automatically switching lines
for long description string. This patch will always remove
tailing white space for UPD header files.
Test: Verified the patch can remove tailing space in
output header files when UPD DSC contains intentional
tailing white space.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Gao Liming <liming.gao@intel.com>
Cc: Zhu Yonghong <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1211
For reducing maintenance effort, the UPD offset can be
automatic assigned by GenCfgOpt.py following by alignment
requirements.
The usage model as below:
. If UPD offset in DSC file are all '*', GenCfgOpt.py will
assign offset for all UPD automatically. In this case no
need to manually hardcode offset to all UPD in DSC.
. If UPD offset in DSC file are all not '*', GenCfgOpt.py
will use hardcoded offset directly (original usage model)
. Tool does not support mixing scenario so UPD offset in DSC
should be all '*' or all hardcoded but not mixed.
In auto mode UPD offset will be assigned following natural
alignment (size aligned) rule and the whole structure size
will align to either 32bits or 64bits depends on maximal UPD
size in the structure.
Test: Verified by both UPD offset hardcoded or '*' in DSC and
generated UPD header files are correct.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Gao Liming <liming.gao@intel.com>
Cc: Zhu Yonghong <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1210
FixedAtBuild PCD is suggested to be used instead
of FeatureFlag PCD so extend this tool to support.
Also skipped PCDs which commented out by '#'.
Test: Verified with FixedAtBuild PCD for including or
excluding lines in generated UPD header files successfully.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Gao Liming <liming.gao@intel.com>
Cc: Zhu Yonghong <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Remove PCDs
The PCDs below are unused, so they have been removed from inf.
gIntelFsp2PkgTokenSpaceGuid.PcdTemporaryRamBase
gIntelFsp2PkgTokenSpaceGuid.PcdTemporaryRamSize
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
PCDs
The PCDs below are unused, so they have been removed from inf.
gIntelFsp2PkgTokenSpaceGuid.PcdFspMaxPatchEntry
gIntelFsp2PkgTokenSpaceGuid.PcdFspMaxPerfEntry
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
The PCDs below are unused, so they have been removed from inf.
gIntelFsp2PkgTokenSpaceGuid.PcdFspMaxPatchEntry
gIntelFsp2PkgTokenSpaceGuid.PcdFspMaxPerfEntry
gIntelFsp2PkgTokenSpaceGuid.PcdTemporaryRamBase
gIntelFsp2PkgTokenSpaceGuid.PcdTemporaryRamSize
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=967
Request to add a library function for GetAcpiTable() in order
to get ACPI table using signature as input.
After evaluation, we found there are many duplicated code to
find ACPI table by signature in different modules.
This patch adds new EfiLocateXXXAcpiTable() APIs in UefiLib
for the request and also the following patch to remove the
duplicated code.
V2:
ASSERT(FALSE) and return NULL instead of real implementation for the
new APIs as the IntelFrameworkPkg is a to-be-deprecated packages.
Cc: Younas khan <pmdyounaskhan786@gmail.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=886
This patch is to support the TFTP windowsize option described in RFC 7440.
The feature allows the client and server to negotiate a window size of
consecutive blocks to send as an alternative for replacing the single-block
lockstep schema.
Currently, the windowsize for write request operation is not supported since
there is no real use cases.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Shao Ming <ming.shao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=886
This patch is to support the TFTP windowsize option described in RFC 7440.
The feature allows the client and server to negotiate a window size of
consecutive blocks to send as an alternative for replacing the single-block
lockstep schema.
Currently, the windowsize for write request operation is not supported since
there is no real use cases.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Shao Ming <ming.shao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
If Structure PCD and Normal Pcd refer to the
same EFI variable, do EFI variable merge, otherwise, do
EFI variable combination.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Replace dict with OrderedDict for PCD so that
the pcd list has same order.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Currently, "gcc-4.8.5-28.el7_5.1.x86_64" generates the following code for
me, from the XADD inline assembly added to "X64/GccInline.c" in commit
17634d026f:
> 0000000000004383 <InternalSyncIncrement>:
> UINT32
> EFIAPI
> InternalSyncIncrement (
> IN volatile UINT32 *Value
> )
> {
> 4383: 55 push %rbp
> 4384: 48 89 e5 mov %rsp,%rbp
> 4387: 48 83 ec 10 sub $0x10,%rsp
> 438b: 48 89 4d 10 mov %rcx,0x10(%rbp)
> UINT32 Result;
>
> __asm__ __volatile__ (
> 438f: 48 8b 55 10 mov 0x10(%rbp),%rdx
> 4393: 48 8b 45 10 mov 0x10(%rbp),%rax
> 4397: b8 01 00 00 00 mov $0x1,%eax
> 439c: f0 0f c1 00 lock xadd %eax,(%rax)
> 43a0: ff c0 inc %eax
> 43a2: 89 45 fc mov %eax,-0x4(%rbp)
> : "m" (*Value) // %2
> : "memory",
> "cc"
> );
>
> return Result;
> 43a5: 8b 45 fc mov -0x4(%rbp),%eax
> }
> 43a8: c9 leaveq
> 43a9: c3 retq
>
The MOV $0X1,%EAX instruction corrupts the address of Value in %RAX before
we reach the XADD instruction. In fact, it makes no sense for XADD to use
%EAX as source operand and (%RAX) as destination operand at the same time.
The XADD instruction's destination operand is a read-write operand. The
GCC documentation states:
> The ordinary output operands must be write-only; GCC will assume that
> the values in these operands before the instruction are dead and need
> not be generated. Extended asm supports input-output or read-write
> operands. Use the constraint character `+' to indicate such an operand
> and list it with the output operands. You should only use read-write
> operands when the constraints for the operand (or the operand in which
> only some of the bits are to be changed) allow a register.
(The above is intentionally quoted from the oldest GCC release that edk2
supports, namely gcc-4.4:
<https://gcc.gnu.org/onlinedocs/gcc-4.4.7/gcc/Extended-Asm.html>.)
Fix the operand list accordingly.
With the patch applied, I get:
> 0000000000004383 <InternalSyncIncrement>:
> UINT32
> EFIAPI
> InternalSyncIncrement (
> IN volatile UINT32 *Value
> )
> {
> 4383: 55 push %rbp
> 4384: 48 89 e5 mov %rsp,%rbp
> 4387: 48 83 ec 10 sub $0x10,%rsp
> 438b: 48 89 4d 10 mov %rcx,0x10(%rbp)
> UINT32 Result;
>
> __asm__ __volatile__ (
> 438f: 48 8b 55 10 mov 0x10(%rbp),%rdx
> 4393: 48 8b 45 10 mov 0x10(%rbp),%rax
> 4397: b8 01 00 00 00 mov $0x1,%eax
> 439c: f0 0f c1 02 lock xadd %eax,(%rdx)
> 43a0: ff c0 inc %eax
> 43a2: 89 45 fc mov %eax,-0x4(%rbp)
> : // no inputs that aren't also outputs
> : "memory",
> "cc"
> );
>
> return Result;
> 43a5: 8b 45 fc mov -0x4(%rbp),%eax
> }
> 43a8: c9 leaveq
> 43a9: c3 retq
Note that some other bugs remain in
"BaseSynchronizationLib/*/GccInline.c"; those should be addressed later,
under <https://bugzilla.tianocore.org/show_bug.cgi?id=1208>.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1207
Fixes: 17634d026f
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
V3 changes include:
1. Keep the ReservedX not change if bit info not changed for this field.
V2 changes include:
1. Use X in ReservedX fields from totally new value if MSR structure definition changed.
For example, if in current structure, the max reserved variable is Reserved2, in new
definition, reserved variable is begin with Reserved3.
V1 Changes:
Changes includes:
1. Update MSR structure definition, change some reserved fields to useful fields:
1. MSR_XEON_PHI_PKG_CST_CONFIG_CONTROL_REGISTER
2. MSR_XEON_PHI_SMM_MCA_CAP_REGISTER
2. For MSR_XEON_PHI_PMG_IO_CAPTURE_BASE_REGISTER structure, it expand the field range.
Old definition like below:
typedef union {
///
/// Individual bit fields
///
struct {
///
/// [Bits 15:0] LVL_2 Base Address (R/W).
///
UINT32 Lvl2Base:16;
///
/// [Bits 18:16] C-state Range (R/W) Specifies the encoding value of the
/// maximum C-State code name to be included when IO read to MWAIT
/// redirection is enabled by MSR_PKG_CST_CONFIG_CONTROL[bit10]: 100b - C4
/// is the max C-State to include 110b - C6 is the max C-State to include.
///
UINT32 CStateRange:3;
UINT32 Reserved1:13;
UINT32 Reserved2:32;
} Bits;
///
/// All bit fields as a 32-bit value
///
UINT32 Uint32;
///
/// All bit fields as a 64-bit value
///
UINT64 Uint64;
} MSR_XEON_PHI_PMG_IO_CAPTURE_BASE_REGISTER;
This patch make below changes for this data structure, it expand "CStateRange" field width.
old one:
UINT32 CStateRange:3;
UINT32 Reserved1:13;
new one:
UINT32 CStateRange:7;
UINT32 Reserved1:9;
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
V3 changes include:
1. Keep ReservedX not change if bit info not changed for this field.
V2 changes include:
1. Use X in ReservedX fields from totally new value if MSR structure definition changed.
For example, if in current structure, the max reserved variable is Reserved2, in new
definition, reserved variable is begin with Reserved3.
V1 Changes includes:
1. Change fields which is reserved in old version: MSR_IA32_RTIT_CTL_REGISTER
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Latest SDM has moved MSR related content from volume 3 chapter 35 to volume 4
chapter 2. Current MSR's comments need to be updated to reference the new
chapter info.
Changes includes:
1. Update referenced chapter info from some MSRs.
2. Update referenced SDM version info.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1187
The patch reverts 9c8c4478cf
"UefiCpuPkg/MtrrLib: Skip Base MSR access when the pair is invalid".
Microsoft Windows will report an error in event manager if MTRR
usage is different across hibernate even when the difference is
in an non valid MTRR pair. This seems like a bug in Windows but
for compatibility and servicing reasons we think a change in UEFI
would wise.
A Windows change has already been submitted for the next iteration
(2019 time frame).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
The change doesn't have functionality impact.
It just renames the mIoMmuProtocol to mIoMmu and moves the
declaration from PciRootBridgeIo.c to PciHostBridge.h.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Suggested-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1196
RootBridgeIoCheckParameter() verifies that the requested MMIO access
can fit in any of the MEM/PMEM 32/64 ranges. But today's logic
somehow only checks the requested access against MEM 32/64 ranges.
It should also check the requested access against PMEM 32/64 ranges.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Garrett Kirkendall <garrett.kirkendall@amd.com>
BZ#1116: https://bugzilla.tianocore.org/show_bug.cgi?id=1116
The usage of following PCDs described in MdeModulePkg.dec don't match
the implementation exactly. This patch updates related description in
both .dec and .uni files to avoid confusion in platform configuration.
PcdSetNxForStack
PcdImageProtectionPolicy
PcdDxeNxMemoryProtectionPolicy
The main change is at the statement on how to handle the FALSE or 0
setting value in those PCDs. Current statement says the implementation
should unset or disable related features but in fact the related code
just do nothing (leave it to AS-IS). That means the result might be
disabled, or might be not. It depends on other features or platform
policy.
For example, if one don't want to enforce NX onto stack memory, he/she
needs to set PcdSetNxForStack to FALSE as well as to clear BIT4 of
PcdDxeNxMemoryProtectionPolicy.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
The following rules are specially proposed by package owner:
* Remove CommonIpf.dsc file.
* Update Common.dsc file, to remove the section with IPF key.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
The following rules are specially proposed by package owner:
* Remove whole "CryptRuntimeDxe" folder which was designed for IPF.
* Remove whole "Include/Protocol" folder
* Update .Dec and .Dsc file accordingly.
Cc: Qin Long <qin.long@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Remove PalLib in dsc which was missed at 64bbf1d.
The PalLib is IPFspecific and will be removed from MdePkg.
So this patch removes PalLib in IntelFrameworkModulePkg.dsc
which was missed at 64bbf1dee2.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1197
Today's InterlockedIncrement()/InterlockedDecrement() guarantees to
perform atomic increment/decrement but doesn't guarantee the return
value equals to the new value.
The patch fixes the behavior to use "XADD" instruction to guarantee
the return value equals to the new value.
The patch calls intrinsic functions for MSVC tool chain, calls the
NASM implementation for INTEL tool chain and calls GCC inline
assembly implementation (GccInline.c) for GCC tool chain.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
For structure Pcd, the latter full assign value in commandLine should
override the former field assign value. For example in commandLine,
build --pcd Token.pcd.field="haha" --pcd Token.pcd=H"{0x01,0x02}",
the former field value "haha" will be ignored and overwrite by the latter
full value "{0x01,0x02}".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1191
Before commit e21e355e2c, jmp _SmiHandler
is commented. And below code, ASM_PFX(CpuSmmDebugEntry) is moved into rax,
then call it. But, this code doesn't work in XCODE5 tool chain. Because XCODE5
doesn't generated the absolute address in the EFI image. So, rax stores the
relative address. Once this logic is moved to another place, it will not work.
; jmp _SmiHandler ; instruction is not needed
...
mov rax, ASM_PFX(CpuSmmDebugEntry)
call rax
Commit e21e355e2c is to support XCODE5.
One tricky way is selected to fix it. Although SmiEntry logic is copied to
another place and run, but here jmp _SmiHandler is enabled to jmp the original
code place, then call ASM_PFX(CpuSmmDebugEntry) with the relative address.
mov rax, strict qword 0 ; mov rax, _SmiHandler
_SmiHandlerAbsAddr:
jmp rax
...
call ASM_PFX(CpuSmmDebugEntry)
Now, BZ 1191 raises the issue that SmiHandler should run in the copied address,
can't run in the common address. So, jmp _SmiHandler is required to be removed,
the code is kept to run in copied address. And, the relative address is
requried to be fixed up to the absolute address. The necessary changes should
not affect the behavior of platforms that already consume PiSmmCpuDxeSmm.
OVMF SMM boot to shell with VS2017, GCC5 and XCODE5 tool chain has been verified.
...
mov rax, strict qword 0 ; call ASM_PFX(CpuSmmDebugEntry)
CpuSmmDebugEntryAbsAddr:
call rax
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
After admin password reach the TryLimit value, code logic will direct return
error password result no matter which password been inputted. So even correct
user password will return TryLimit error.
Now update code logic to also check user password. Only when both user/admin
password reach the TryLimit count, code will return exceed TryLimit error.
Change-Id: I17fbd1425b77150eb933a5002a1f87a0f0032e9b
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1182
Some devices can be non removable (such as eMMC) and checking
Present State Register on host controller may falsely return
an information that device is not present. Execute this
check conditionally on the SloType field value.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1185
SdMmcHcReset used to set all bits of Software Reset Register to 1
including reserved ones, which on some controllers may result in
timeout.
Now only first bit is set, which means "Software Reset for All".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
FlexibleFieldName was never used not set.
DefinitionPosition (file and line number) are recalculated
and never used outside the function. remove the saving of the
data.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
1) use namedtuple instead of custom class when apropriate
2) rename collections.OrderedDict to OrderedDict since we import it already
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
1) use decorators
2) also change some private functions to public when all callers are
external
3) change external callers to use functions instead of directly
accessing private data.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1152
v2: Sync the same logic to Ipv6 and update code comments.
The PXE driver installs a SNP and open this SNP with attribute BY_DRIVER
to avoid it being opened by MNP driver, this SNP is also expected not to
be opened by other drivers with EXCLUSIVE attribute. In some cases, other
drivers may happen to do this by error, and thus cause a system crash.
This patch adds EXCLUSIVE attribute when opening SNP in PXE driver, and
will reject all OpenProtocol requests by EXCLUSIVE.
Cc: Subramanian, Sriram <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1169
PCI spec:
They are also required to always implement function 0 in the device.
Implementing other functions is optional and may be assigned in any
order (i.e., a two-function device must respond to function 0 but
can choose any of the other possible function numbers (1-7) for the
second function).
This patch updates ScanPciBus() to not scan other functions if
function 0 is not implemented.
Test done:
Added debug code below in the second loop of ScanPciBus(),
compared the debug logs with and without this patch, many
non-0 unimplemented functions are skipped correctly.
DEBUG ((
DEBUG_INFO,
"%a() B%02xD%02xF%02x VendorId: %04x DeviceId: %04x\n",
__FUNCTION__,
Bus,
Device,
Function,
VendorID,
DeviceID
));
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
Cc: Tomson Chang <tomson.chang@intel.com>
Cc: Jenny Huang <jenny.huang@intel.com>
Cc: Amy Chan <amy.chan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=996
Issue:
In current code logic, when a key is pressed, it will search
the whole NotifyList to find whether a notification has been
registered with the keystroke. if yes, it will en-queue the
key for notification execution later. And now if different
notification functions have been registered with the same key,
then the key will be en-queued more than once. Then it will
cause the notification executed more than once.
This patch is to enhance the code logic to fix this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=996
Issue:
In current code logic, when a key is pressed, it will search
the whole NotifyList to find whether a notification has been
registered with the keystroke. if yes, it will en-queue the
key for notification execution later. And now if different
notification functions have been registered with the same key,
then the key will be en-queued more than once. Then it will
cause the notification executed more than once.
This patch is to enhance the code logic to fix this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=996
Issue:
In current code logic, when a key is pressed, it will search
the whole NotifyList to find whether a notification has been
registered with the keystroke. if yes, it will en-queue the
key for notification execution later. And now if different
notification functions have been registered with the same key,
then the key will be en-queued more than once. Then it will
cause the notification executed more than once.
This patch is to enhance the code logic to fix this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: <Jiewen.yao@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: <Jiewen.yao@intel.com>
This patch align the boolean type PCD value's display in the build
report. Original it may display 0x0, also may use 0 for the same PCD.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Add NmakeSubdirs.py to replace NmakeSubdirs.bat in VS Makefile. This script will
invoke nmake in multi thread mode. It can save more than half time of BaseTools
C clean build.
GCC make supports multiple thread in make phase. So, GNUmakefile doesn't need apply
this script.
single task or job=1:
just single thread and invoke subprocess,subprocess will use
system.stdout to print output.
multi task:
thread number is logic cpu count.All subprocess output will pass to
python script by PIPE and then script print it to system.stdout.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dongao Guo<dongao.guo@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Test-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1167
When the HSEE in the USBCMD bit is a ‘1’ and the HSE bit in the
USBSTS register is a ‘1’, the xHC shall assert out-of-band error
signaling to the host and assert the SERR# pin.
To prevent masking any potential issues with SERR, this patch is
to set USBCMD Host System Error Enable(HSEE) Bit if PCICMD SERR#
Enable Bit is set.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Fei1 Wang <fei1.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Build tool should report warning if a platform
defines [DefaultStores] but forgets to defined
PcdNvStoreDefaultValueBuffer as PcdsDynamicExVpd in dsc file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch is going to fix the issue that
The Pcd field value is override incorrectly when there
is no Pcd overall value assignment in Dsc file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The case is user use 0x1} as a hex value for Pcd, it directly cause
tool report traceback info. This patch add more error info.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Today's implementation does an exact device path match to check
whether the device path of a console is in ConIn/ConOut/ErrOut.
But that doesn't work for the USB keyboard.
Because when a platform have multiple USB port, ConIn needs to
carry all device paths corresponding to each port.
Even worse, today's BDS core logic removes the device path from
ConIn/ConOut/ErrOut when the connection to that device path fails.
So if user switches the USB keyboard from one port to another across
boot, the USB keyboard doesn't work in the second boot.
ConPlatform driver solved this problem by adding the
IsHotPlugDevice() function. So that for USB keyboard, ConPlatform
doesn't care whether its device path is in ConIn or not.
But the rule is too loose, and now causes platform BDS cannot control
whether to enable USB keyboard as an active console.
The patch changes ConPlatform to support USB short-form device path
when checking whether the device path of a console is in
ConIn/ConOut/ErrOut.
The logic to always accept USB/PCCARD device as active console is
removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When build with WinSDK <= Win10 TH2, the terminal over CMD.exe
doesn't work. Because Win10 later than TH2 starts to support VT
terminal.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Since the emulator under Windows is enabled, the patch changes
README to include the information of emulator under Windows.
It also changes README to Readme.md for better looking.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
This feature is the same as Stack Guard enabled in driver CpuDxe but
applies to PEI phase. Due to the specialty in PEI module dispatching,
this driver is changed to do the actual initialization in notify
callback of event gEfiPeiMemoryDiscoveredPpiGuid. This can let the
stack guard apply to as most PEI drivers as possible.
To let Stack Guard work, some simple page table management code are
introduced to setup Guard page at base of stack for each processor.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: "Ware, Ryan R" <ryan.r.ware@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Stack Guard needs to setup stack switch capability to allow exception
handler to be called with good stack if stack overflow is detected.
This patch update InitializeCpuExceptionHandlersEx() to allow pass
extra initialization data used to setup exception stack switch for
specified exceptions.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: "Ware, Ryan R" <ryan.r.ware@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
PEI Stack Guard needs to enable paging before DxeIpl. This might cause
#GP in the transition from 32-bit PEI to 64-bit DXE due to the code
trying to write CR3 register with PML4 page table while the processor
is enabled with PAE paging.
Simply disabling paging before updating CR3 can solve this conflict.
There's no such issue for 64-bit PEI so this change applies only to
32-bit code.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: "Ware, Ryan R" <ryan.r.ware@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
In V2, Remove GetImageReadFunction(), directly use PeiImageRead().
The copy PeiImageReadForShadow function doesn't improve the boot performance.
This patch removes this copy logic to simplify the code logic.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
UEFI Sct validates Dma mapping. For CoherentDmaLib it always failed
because there were no required checks present in DmaMap.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The only valid memory types for DmaAlignedBuffer should be
EfiBootServicesData and EfiRuntimeServicesData. However due to the typo,
there is no way to allocate runtime pages, and INVALID_PARAMETER is
always returned. Fix the typo.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The EhcReset(), EhcGetRootHubPortStatus() and EhcDriverBindingStart()
functions need to see whether the host controller (or a specific port on
the host controller) can be accessed, dependent on the controller having
(or the specific port being) an in-use debug port. Because the condition
isn't simple, extract it to a separate function.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Suggested-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Some local variables are initialized but never used.
GCC complains about that. The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1145
Currently run PatchCheck.py with Python3 will meet
following error:
.....
File "PatchCheck.py", line 554, in run_git
return Result[0].decode('utf-8', 'ignore') if Result[0] and
Result[0].find("fatal")!=0 else None
TypeError: a bytes-like object is required, not 'str'
This issue was introduce by commit:5ac4548cdf654.
This patch is to convert the str object of "fatal" to
byte object to fix this failure.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Defined a pcd in Ovmf.dec and used that pcd in AcpiPlatformDxe.inf,
then assign a value to that pcd from DSC, then build Ovmf platform
successfully. But this Pcd was wrongly listed into not used section
in the report.txt file.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Fix trailing white spaces and invalid line ending issue.
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Commit 09943f5ecc ("MdeModulePkg: Skip to manage usb debug port in EDKII
EHCI driver if it's used by usb debug port driver", 2012-04-28) made the
host controller reset in EhcDriverBindingStart() conditional. The intent
was to avoid the reset when
- one of the USB ports on the host controller was a Debug Port, AND
- the Debug Port was in use.
This translates to the following positive condition: reset the controller
only if:
- no USB port on the host controller is a Debug Port, OR
- the Debug Port is not in use.
Commit 09943f5ecc failed to implement the first subcondition, and thus
the result is too strict now (for resetting the host controller). Relax it
to the correct condition.
This issue was found by Steven Shi on QEMU. QEMU's EHCI device model does
not have a Debug Port. In repeated disconnect / connect cycles, the
controller is never reset in EhcDriverBindingStart(), therefore the
devices on the controller are never re-enumerated after a disconnect.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reported-by: Steven Shi <steven.shi@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1129
Fixes: 09943f5ecc
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Tested-by: Steven Shi <steven.shi@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1115
When the type of HiiValue is EFI_IFR_TYPE_BUFFER,
its question type is EFI_IFR_ORDERED_LIST_OP.
And the buffer size allocated for Statement->BufferValue
of orderedList is "Statement->StorageWidth"
in IfrParse.c.
So here when backup the buffer value and copy the size of
"Statement->StorageWidth + sizeof(CHAR16)" is incorrect.
This patch is to fix this issue.
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
When an exception happens in AP, system hangs at
GetPeiServicesTablePointer(), complaining the PeiServices retrieved
from memory before IDT is NULL.
Due to the following commit:
c563077a38
* UefiCpuPkg/MpInitLib: Avoid calling PEI services from AP
the IDT used by AP no longer preserve PeiServices pointer in the
very beginning.
But the implementation of PeiExceptionHandlerLib still assumes
the PeiServices pointer is there, so the assertion happens.
The patch fixes the exception handler library to not call
PEI services from AP.
The patch duplicates the #0 exception stub header in an allocated
pool but with extra 4-byte/8-byte to store the exception handler
data which was originally stored in HOB.
When AP exception happens, the code gets the exception handler data
from the exception handler for #0.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Fan Jeff <vanjeff_919@hotmail.com>
Today's implementation of handling HOOK_BEFORE and HOOK_AFTER is
a bit complex. More comments is better.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Fan Jeff <vanjeff_919@hotmail.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
1. Not append trailing zero for PcdValue
2. make sure the point to Variable Name in PCD
DataBase 2 bytes aligned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Fixed the pcd value override issue when Dynamic Pcd is from
command line but is not list in Dsc file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch updates IP4 stack to support 32bit subnet mask in PXE boot process.
When 32bit subnet mask is used, the IP4 driver couldn't use the subnet mask to determine
whether destination IP address is on-link or not, so it will always try to send all the
packets to the destination IP address directly first, if failed it will continue
to try the default gateway.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1121
To produce a EFI_BLOCK_IO_PROTOCOL instance in Emulator platform,
EmulatorPkg defines the EMU_IO_THUNK_PROTOCOL. OS dependent layer
needs to produce this protocol implementation and a generic OS
independent layer consumes this protocol to produce
EFI_BLOCK_IO_PROTOCOL.
EMU_IO_THUNK_PROTOCOL can also be used to abstract the OS dependent
IO operation for other UEFI protocols, e.g.: GOP, SimpleFileSystem
and etc.
It contains two interfaces Open() and Close(). Open() creates the
specific IO instances, e.g. for Block IO access, File System access,
Screen access, etc. Close() destroys the specific IO instances.
Later on the Emulator generic module (e.g.: EmuBlockIoDxe) calls
Open() to create the IO instance in DriverBindingStart() and calls
Close() in DriverBindingStop().
But today's implementation of DriverBindingStop() contains a bug
that it calls Close() before uninstalling the EFI_BLOCK_IO_PROTOCOL.
It's a mistake in code. Take EFI_BLOCK_IO for example,
the uninstallation may cause the upper layer driver that consumes
EFI_BLOCK_IO call BlockIo.Reset(), which consequently calls
EmuBlockIo.Reset(). But the EmuBlockIo instance is already destroyed
by Close() that happens before uninstallation.
So a proper implementation is to call Close() after uninstallation
succeeds.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1121
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Andrew Fish <afish@apple.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1120
Logo is enabled by adding a separate core driver LogoDxe.
UiApp and BootManagerMenuApp are added to provide two UIs.
LoadFileOnFv2 is added to auto-install LoadFile protocol for
applications in FV so the boot options for applications can be
auto-created from LoadFile.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
Developer can build the Win Host in VS2017 and launch to debug it.
Platform 'x64' is to build 64bit EmulatorWin.
Platform 'Win32' is to build 32bit EmulatorWin.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1119
Today's implementation reports CPU address size as 36 through CPU
HOB. But when WinHost is running at 64bit, the system memory might
be allocated above 2^36.
It causes system asserts when DxeCore code tries to find the
corresponding GCD entry for a given valid address.
The patch uses 57 as the CPU address size which is maximum linear
address size when 5-level paging is enabled in host OS.
Using 64 seems more proper and a one-time change even 6-level
paging might be invented. But it causes CoreInitializeGcdServices()
assertion on following code:
Entry->EndAddress = LShiftU64 (1, SizeOfMemorySpace) - 1;
Because LShiftU64 expects SizeOfMemorySpace < 64.
So to be practical, I didn't report 64 and change
CoreInitializeGcdServices().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
IsSupportedArch and IsBinaryModule return the same value under the same
curcimstances. Remove newer one with fewer callers and send them to the
other function.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1099
Update SmbiosView to parse the new definitions which
are introduced in SMBIOS3.2.0
V2:
1. Add structure length check before dump the fileds in
Type 9 and Type 17 in case some fileds are not organized
and reported by drivers.
2. Dump the InterfaceTypeSpecificData in Type 42.
V3:
1. Correct the structure length in Type17.
2. Remove the redundant check "if (PeerGroupCount > 0)" in Type 9.
3. Use the Uint16 filed instead of Bits field in union
MEMORY_DEVICE_OPERATING_MODE_CAPABILITY to dump data.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The patch is the result of running
"BaseTools/Scripts/FormatDosFiles.py EmulatorPkg/"
No functionality impact.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
BZ#1127: https://bugzilla.tianocore.org/show_bug.cgi?id=1127
It's reported the debug message in CpuDxe driver is quite annoying in
boot and shell, and slow down the boot process. To solve this issue,
this patch changes the DEBUG_INFO to DEBUG_VERBOSE. On a typical Intel
real platform, at least 16s boot time can be saved.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Since SMM profile feature has already implemented non-stop mode if #PF
occurred, this patch just makes use of the existing implementation to
accommodate heap guard and NULL pointer detection feature.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Same as SMM profile feature, a special #PF is used to set page attribute
to 'present' and a special #DB handler to reset it back to 'not-present',
right after the instruction causing #PF got executed.
Since the new #PF handler won't enter into dead-loop, the instruction
which caused the #PF will get chance to re-execute with accessible pages.
The exception message will still be printed out on debug console so that
the developer/QA can find that there's potential heap overflow or null
pointer access occurred.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Once the #PF handler has set the page to be 'present', there should
be a way to reset it to 'not-present'. 'TF' bit in EFLAGS can be used
for this purpose. 'TF' bit will be set in interrupted function context
so that it can be triggered once the cpu control returns back to the
instruction causing #PF and re-execute it.
This is an necessary step to implement non-stop mode for Heap Guard
and NULL Pointer Detection feature.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
The change is part of requirement tracked by #BZ1095
https://bugzilla.tianocore.org/show_bug.cgi?id=1095
Background:
Heap Guard and NULL Pointer Detection are very useful features to detect
code flaw in EDK II. If an issue is detected, #PF exception will be
triggered and the BIOS will enter into dead loop, which is the default
behavior of exception handling. From QA perspective, this default behavior
will block them to collect all tests result in reasonable time.
The solution is to introduce non-stop mode to Heap Guard and NULL Pointer
Detection features. This needs to update CpuDxe, PiSmmCpuDxeSmm and
CpuExceptionHandlerLib to allow the code to continue execution after #PF.
The mechanism behind it is the same as SMM Profile feature, in which a
special #PF handler is registered to set the page causing #PF to be
'present' and setup single steop trap, then return the control back to
the instruction accessing that page. Once the instruction is re-executed,
a #DB is triggered and a special handler for it will be called to reset
the page back to 'not-present'.
The non-stop mode is controlled by BIT6 of following PCDs
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPropertyMask
gEfiMdeModulePkgTokenSpaceGuid.PcdNullPointerDetectionPropertyMask
BIT6 of PcdHeapGuardPropertyMask is used to enable/disable non-stop mode
of Heap Guard feature. It applies to both UEFI and SMM heap guard, if
any of them is enabled.
BIT6 of PcdNullPointerDetectionPropertyMask is used to enable/disable
non-stop mode of NULL Pointer Detection feature. It applies to both
UEFI and SMM NULL Pointer Detection, if any of them is enabled.
The default setting is 'disable', meaning the boot will stop at #PF
exception.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
current use (0x41>=~0x0&0x41|0x0) as Pcd value cause build failure
because the ~ is not correctly recognized.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add check for the datum type keyword "VOID*", only the VOID* type
Pcd need the additional maxsize info.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Call BS.AllocatePages in DXE driver and call SMM FreePages with the address of the buffer allocated in the DXE driver. SMM FreePages success and add a non-SMRAM range into SMM heap list. This is not an expected behavior. SMM FreePages should return error for this case and not free the pages.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1098
Change-Id: Ie5ffa1ac62c558aa418a8a3d7d0e8158b846e13b
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1099
Add SMBIOS 3.2.0 definitions according to
www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.2.0.pdf.
Processor Information (Type 4):
- SMBIOSCR00163: add socket LGA2066
- SMBIOSCR00173: add Intel Core i9
- SMBIOSCR00176: add new processor sockets
Port Connector Information (Type 8):
- SMBIOSCR00168: add USB Type-C
System Slots (Type 9):
- SMBIOSCR00164: add "unavailable" to current usage field
- SMBIOSCR00167: add support for PCIe bifurcation
Memory Device (Type 17):
- SMBIOSCR00162: add support for NVDIMMs
- SMBIOSCR00166: extend support for NVDIMMs and add support for logical memory type
- SMBIOSCR00172: rename "Configured Memory Clock Speed" to "Configured Memory Speed"
- SMBIOSCR00174: add new memory technology value (Intel Persistent Memory, 3D XPoint)
IPMI Device Information (Type 38):
- SMBIOSCR00171: add SSIF
Management Controller Host Interface (Type 42)
- SMBIOSCR00175: fix structure data parsing issue
V2: Add missing update to MISC_PORT_TYPE and SMBIOS_TABLE_TYPE9.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The EDK Shell is end of line so the FS mapping to old EDK
Shell bin directory is better to be removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1117
The root cause is when a file is opened through File.Open(), the
private data for the File is not allocated, so when later
when File.Close() is called, the signature check in CR() causes
the assertion.
The private data for the File is allocated properly when the file
is opened from FS.OpenVolume().
The patch also fixes a minor issue that wrongly assigns
revision number to File.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1079
Without signal of EndOfDxe, the 3rd party code (.efi from non-flash
storage) cannot run. It's forbidden by
8be37a5cee
*MdeModulePkg/SecurityStubDxe: Defer 3rd party image before EndOfDxe
The patch enables running of SCT from internal shell.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
Now firmware can display the time correctly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
Now the firmware can boot to Shell and count down 5 seconds to
command prompt.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
The patch adds GOP and SimpleTextIn[Ex] support.
Now firmware can boot to UI and Shell but timer doesn't work.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Andrew Fish <afish@apple.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The patch implements Stdin/Stdout/Stderr access so that
the native OS console (cmd.exe) can be used as the firmware
console and debug message can also be routed to it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
This is the initial patch to make it boot to early DXE
phase without display (only debug message).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
VS compiler complains converting UINTN to UINT16 causes data lost.
Add typecast to fix the build failure.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Andrdw Fish <afish@apple.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1109
Today's restriction of VGA device is to have only one VGA device
enabled per PCI segment. It's not correct because several segments
may share one IO / MMIO address space.
We should restrict to have one VGA per Host Bridge because each
Host Bridge has its only IO / MMIO address space.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1109
The patch doesn't change any behavior of this function.
It just renames the function to LocateVgaDevice() and renames
some parameters and local variables.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Since hotkey 'f' is used to start AndroidFastbootApp. If user
press 'f' key too long, it may be recognized pressing 'f' key
multiple times. Then AndroidFastbootApp exists since it delcares
any key press could make it exit.
So only use ENTER or SPACE key to exit AndroidFastbootApp.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The redundant functions which are never called have been removed.
They are AtaNonDataCommandInExt,IDEBusDriverConfigurationSetOptions,
GetResponse,IDEBusDriverConfigurationOptionsValid and
IDEBusDriverConfigurationForceDefaults.
https://bugzilla.tianocore.org/show_bug.cgi?id=1063
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
V2: Add --target-name to specify the file name to create
Because Ecc.py was renamed to EccMain.py
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In commit 81502cee20 ("BaseTools/Source/C: take EXTRA_LDFLAGS from the
caller", 2018-08-16), I missed that "VfrCompile/GNUmakefile" does not use
BUILD_LFLAGS in the APPLICATION linking rule, unlike "app.makefile" does.
Instead, "VfrCompile/GNUmakefile" uses the (undefined) LFLAGS macro.
Therefore commit 81502cee20 did not cover the linking step of
VfrCompile.
Thankfully, the structure of the linking rules is the same, between
"app.makefile" and "VfrCompile/GNUmakefile". Rename the undefined LFLAGS
macro in "VfrCompile/GNUmakefile" to VFR_LFLAGS (for consistency with
VFR_CXXFLAGS), and set it to EXTRA_LDFLAGS.
As a result, we have:
| compilation | linking
-----------+--------------------------------+----------------------
VfrCompile | VFR_CXXFLAGS = | VFR_LFLAGS =
| BUILD_OPTFLAGS = | EXTRA_LDFLAGS
| '-O2' + EXTRA_OPTFLAGS |
-----------+--------------------------------+----------------------
other apps | BUILD_CFLAGS/BUILD_CXXFLAGS = | BUILD_LFLAGS =
| [...] + BUILD_OPTFLAGS = | [...] + EXTRA_LDFLAGS
| [...] + '-O2' + EXTRA_OPTFLAGS |
This table shows
- that the VfrCompile compilation and linking flags are always a subset of
the corresponding flags used by the other apps,
- and that the EXTRA flags are always at the end.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1540244
Fixes: 81502cee20
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
While reviewing the patch that would land as 768b611136
("MdePkg/UefiLib: introduce EfiOpenFileByDevicePath()", 2018-08-16), Ray
pointed out that distinguishing EFI_FILE_MODE_CREATE was wasteful. Per
spec, if the file to create exists, then EFI_FILE_MODE_CREATE is ignored
by EFI_FILE_PROTOCOL.Open(), and the existent file is opened.
Therefore we don't need an attempt to "open-but-not-create" first, and a
fallback to "open-and-create-too" second -- that behavior is internal to
EFI_FILE_PROTOCOL.Open(). Remove the special-casing of
EFI_FILE_MODE_CREATE.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Suggested-by: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1074
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1.After the cleanup at "MdeModulePkg UiApp: Remove redundant functions",
the function "IsResetReminderFeatureEnable()" and the variable
"mFeaturerSwitch" become redundant so they have been removed.
2.Therefore, the "IF" expression has also been removed, whose judgment condition
is "IsResetReminderFeatureEnable()".
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The functions that are never called have been removed.
They are IsImageInsideSmram,FindImageRecord,SmmRemoveImageRecord,
SmmMemoryAttributesTableConsistencyCheck,DumpSmmMemoryMapEntry,
SmmMemoryMapConsistencyCheckRange,SmmMemoryMapConsistencyCheck,
DumpSmmMemoryMap,ClearGuardMapBit,SetGuardMapBit,AdjustMemoryA,
AdjustMemoryS,IsHeadGuard and IsTailGuard.
FindImageRecord() is called by SmmRemoveImageRecord(); however,
nothing calls SmmRemoveImageRecord().
SmmMemoryMapConsistencyCheckRange() is called by
SmmMemoryMapConsistencyCheck(); however, nothing calls
SmmMemoryMapConsistencyCheck().
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
v2:append the following to the commit message.
- FindImageRecord() is called by SmmRemoveImageRecord(); however,
nothing calls SmmRemoveImageRecord().
- SmmMemoryMapConsistencyCheckRange() is called by
SmmMemoryMapConsistencyCheck(); however, nothing calls
SmmMemoryMapConsistencyCheck().
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The functions that are never called have been removed.
They are UfsPeimUnlinkMemBlock,UfsPeimRequestSense,
UfsPeimInquiry,UfsRwAttributes,UfsClearFlag,UfsReadFlag
and UfsFindAvailableSlotInTmrl.
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
v2: Remove the comment that mentioned 'UfsPeimUnlinkMemBlock'
within function UfsPeimFreeMemPool().
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1093
Return Stack Buffer (RSB) is used to predict the target of RET
instructions. When the RSB underflows, some processors may fall back to
using branch predictors. This might impact software using the retpoline
mitigation strategy on those processors.
This commit will add RSB stuffing logic before returning from SMM (the RSM
instruction) to avoid interfering with non-SMM usage of the retpoline
technique.
After the stuffing, RSB entries will contain a trap like:
@SpecTrap:
pause
lfence
jmp @SpecTrap
A more detailed explanation of the purpose of commit is under the
'Branch target injection mitigation' section of the below link:
https://software.intel.com/security-software-guidance/insights/host-firmware-speculative-execution-side-channel-mitigation
Please note that this commit requires further actions (BZ 1091) to remove
the duplicated 'StuffRsb.inc' files and merge them into one under a
UefiCpuPkg package-level directory (such as UefiCpuPkg/Include/).
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1091
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1093
Return Stack Buffer (RSB) is used to predict the target of RET
instructions. When the RSB underflows, some processors may fall back to
using branch predictors. This might impact software using the retpoline
mitigation strategy on those processors.
This commit will add RSB stuffing logic before returning from SMM (the RSM
instruction) to avoid interfering with non-SMM usage of the retpoline
technique.
After the stuffing, RSB entries will contain a trap like:
@SpecTrap:
pause
lfence
jmp @SpecTrap
A more detailed explanation of the purpose of commit is under the
'Branch target injection mitigation' section of the below link:
https://software.intel.com/security-software-guidance/insights/host-firmware-speculative-execution-side-channel-mitigation
Please note that this commit requires further actions (BZ 1091) to remove
the duplicated 'StuffRsb.inc' files and merge them into one under a
UefiCpuPkg package-level directory (such as UefiCpuPkg/Include/).
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1091
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The issue was found when heap guard is turned on.
PrintLib somehow receives a non-null terminated string in var-arg.
When the PrintLib implementation reads the string it keeps
reading because no null-terminator is met, which triggers the page
fault set by the heap guard.
The issue is caused by a bug in FileBufferPrintLine().
When "edit" opens a binary file, in FileBufferPrintLine(),
the Line->Buffer may start with \x00 \x00, but the Line->Size is
larger than MainEditor.ScreenSize.Column, it causes the PrintLine is
set to an empty string by below call:
StrnCpyS (
PrintLine, BufLen/sizeof(CHAR16), Buffer,
MIN(Limit, MainEditor.ScreenSize.Column)
);
But since Limit (equals to Line->Size) is larger than
MainEditor.ScreenSize.Column, below for-loop doesn't successfully
set the whole PrintLine to all-empty-space.
for (; Limit < MainEditor.ScreenSize.Column; Limit++) {
PrintLine[Limit] = L' ';
}
So after the for-loop, PrintLine is still an empty string.
Later in below call, the PrintLine2 is created based on PrintLine.
ShellCopySearchAndReplace (
PrintLine, PrintLine2,
BufLen * 2, L"%", L"^%", FALSE, FALSE
);
But due to the implementation of ShellCopySearchAndReplace(),
PrintLine2 is untouched and INVALID_PARAMETER is returned.
Finally an uninitialized string is passed to ShellPrintEx()
which causes the #PF exception.
The fix is to reset Limit to StrLen(PrintLine) before for-loop.
So that PrintLine can be converted from an empty string to a
string containing all spaces.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jian Wang <jian.j.wang@intel.com>
Don't iterate over new dictionaries with one item
Create the data and then add to dictionary.
Note: if you diff ignoring whitespace changes you
can more easily see the relevant changes.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
MakeFile generation is once per module, so mark it as such.
also move the time stamp creation function inside as it's
only called from one place.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
1) Add a new file Common/caching.py
a. Allows for automated caching of repeated class functions, class
properties, and non-class functions
b. When called the first time the value is cached and if called a
second time, the cached result is called, not the function.
c. When used, this saves lots of memory since the actual function
pointers are replaced with smaller data elements.
d. note that not all features are used yet.
2) Fix AutoGen/GenMake and AutoGen/GetC to not call into private member
variables of ModuleAutoGen class
a. use the existing accessor properties for the data
3) Change AutoGen classes to remove a exception for duplicate members in
__new__ and use ?in? testing to speed up
4) Work on ModuleAutoGen class
a. Change all properties that use caching to use @caching_property
(see #1 above)
b. Change all properties that do not use caching to use standard python
decorator "@property"
c. Change all cases where a dictionary/set/list/object was created
and then immediately updated to use constructor parameters
d. Refactor each property function to remove the internal variable
that is no longer needed (this helps find items like #2 above)
e. Refactor _ApplyBuildRule with optional parameter to work around
circular dependency with BinaryFileList.
Note that 4e was almost certainly unintended as the functions were acting on
incomplete information since they were directly accessing private instance
variables at the same time another function on the stack was creating the same
private isntance data.
This overall changes behavior slightly, but makes the codebase smaller and
easier to read.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Per spec VOID* PCD max size should be a UINT16 value. so this patch
add the value check whether it is in range 0x0 .. 0xFFFF.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Allow the caller of the top-level makefile either to set EXTRA_LDFLAGS in
the environment or to pass EXTRA_LDFLAGS as a macro definition on the
command line. EXTRA_LDFLAGS extends (and potentially overrides) default
link-editing flags set in the makefiles.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1540244
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Allow the caller of the top-level makefile either to set EXTRA_OPTFLAGS in
the environment or to pass EXTRA_OPTFLAGS as a macro definition on the
command line. EXTRA_OPTFLAGS extends (and potentially overrides) default C
compilation flags set in the makefiles.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1540244
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The option "-O2" is not a preprocessor flag, but a code generation
(compilation) flag. Move it from BUILD_CPPFLAGS to BUILD_CFLAGS and
BUILD_CXXFLAGS.
Because "VfrCompile/GNUmakefile" uses "-O2" through BUILD_CPPFLAGS, and
because it doesn't use BUILD_CXXFLAGS, we have to introduce BUILD_OPTFLAGS
separately, so that "VfrCompile/GNUmakefile" can continue using just this
flag.
This patch doesn't change behavior.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1540244
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Option "-c" is a mode selection flag (choosing between compiling and
linking); it should not be in BUILD_CFLAGS, which applies only to
compiling anyway. The compilation rule for C source files, in
"footer.makefile", already includes "-c" -- currently we have double "-c"
options.
This patch doesn't change behavior.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1540244
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Replace the "old shell method" implementation in
ShellOpenFileByDevicePath() with EfiOpenFileByDevicePath() from UefiLib,
correcting the following issues:
- code duplication between this module and other modules,
- local variable name "EfiSimpleFileSystemProtocol" starting with "Efi"
prefix,
- bogus "FileHandle = NULL" assignments,
- leaking "Handle1" when the device path type/subtype check or the
realignment-motivated AllocateCopyPool() fails in the loop.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1008
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The ShellOpenFileByDevicePath() API promises to set the DeviceHandle
output parameter to the handle of the filesystem identified by the
FilePath input parameter. However, this doesn't actually happen when the
UEFI Shell 2.0 method is used (which is basically "always" nowadays).
Accordingly, the only caller of ShellOpenFileByDevicePath(), namely
ShellOpenFileByName(), defines a (dummy) local DeviceHandle variable just
so it can call ShellOpenFileByDevicePath().
Remove the useless output parameter.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1008
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Replace the OpenFileByDevicePath() function with EfiOpenFileByDevicePath()
from UefiLib, correcting the following issues:
- imprecise comments on OpenFileByDevicePath(),
- code duplication between this module and other modules,
- local variable name "EfiSimpleFileSystemProtocol" starting with "Efi"
prefix,
- bogus "FileHandle = NULL" assignments,
- leaking "Handle1" when the device path type/subtype check or the
realignment-motivated AllocateCopyPool() fails in the loop,
- stale SHELL_FILE_HANDLE reference in a comment.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Roman Bacik <roman.bacik@broadcom.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1008
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Replace the OpenFileByDevicePath() function with EfiOpenFileByDevicePath()
from UefiLib, correcting the following issues:
- imprecise comments on OpenFileByDevicePath(),
- code duplication between this module and other modules,
- local variable name "EfiSimpleFileSystemProtocol" starting with "Efi"
prefix,
- bogus "FileHandle = NULL" assignments,
- passing a potentially unaligned "FILEPATH_DEVICE_PATH.PathName" field to
a protocol member function (forbidden by the UEFI spec),
- leaking "Handle1" when the device path type/subtype check fails in the
loop,
- stale SHELL_FILE_HANDLE reference in a comment.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1008
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Replace the OpenFileByDevicePath() function with EfiOpenFileByDevicePath()
from UefiLib, correcting the following issues:
- imprecise comments on OpenFileByDevicePath(),
- code duplication between this module and other modules,
- local variable name "EfiSimpleFileSystemProtocol" starting with "Efi"
prefix,
- bogus "FileHandle = NULL" assignments,
- passing a potentially unaligned "FILEPATH_DEVICE_PATH.PathName" field to
a protocol member function (forbidden by the UEFI spec),
- leaking "Handle1" when the device path type/subtype check fails in the
loop,
- stale SHELL_FILE_HANDLE reference in a comment.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1008
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1080
Per Shell spec 2.2 chapter 3.4.4.2, Unicode file tag should be
inserted in the output from the input redirected variable, to ensure
it looks like a UCS-2 encode file.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
When "<a" is used to redirect ASCII file to an application, Shell
core reads the ASCII file and converts the ASCII to Unicode as the
input source of the application.
But per Shell spec, the input source should have \xFEFF to indicate
it's a Unicode stream.
The patch adds the missing \xFEFF.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
1) currently a couple classes use m instead of self (including some mixed
functions that should have previously failed).
2) deleted some blank lines.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
We met a case on GCC toolchain for increment build. the case is user
build Helloworld first, then rename the source file Helloworld.c to
Helloworld_new.c and also update the file name to Helloworld_new.c in
.inf file's [sources] section. finally, he rebuild it again.
It cause build failure due to multiple definition of `UefiMain' because
in the .lib file it both have Helloworld.obj and Helloworld_new.obj.
current we use the option 'cr' to create the .lib file while the 'r'
cmd means replace existing or insert new files into the archive. so
in this patch before we create the .lib file, we delete it first.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V2: Add back "from Common.DataType import *"
1. Remove some import statement that are not used.
2. Remove the Type value in the LibraryClassObject because we don't
actually use it.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Commit b22a62be5c
* IntelFrameworkModule/LegacyBios:Use reserved memory for legacy data
allocates reserved memory for holding legacy code/data.
But with PcdDxeNxMemoryProtectionPolicy set to certain value to
forbid execution when code is in certain type of memory, it's
possible that a platform forbids execution when code is in reserved
memory. The patch calls GCD service to allow such case otherwise
CPU exception may occur.
Code execution in BSCode area should be enabled by platform by
default.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jian Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=777
Per Shell spec, the environment variable has a case-sensitive name.
But today's implementation of EfiShellSetEnv() compares the
environment variable name case insensitively, which causes variable
like "CWD" cannot be set due to "cwd" is pre-defined variable.
The patch fixes this issue.
The EfiShellGetEnv() doesn't have such issue because it will
call into ShellFindEnvVarInList() which uses StrCmp().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jim Dailey <jim_dailey@dell.com>
1. Complete the full path for import statement. Use "EccMain" to
replace "Ecc" for the absolute path support.
2. Fix some issues on configuration file.
3. Fix an issue of RaiseError not working in EdkLogger.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
after analysis the BuildOptionValue function, we found the if statement
IsFieldValueAnArray is redundant because ValueExpressionEx will handle
it.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1082
Current code only returns actual data length in case of return status
buffer too small.
If caller provided a buffer that's large enough to restore data from
lock box, actual data length is not returned. It needs to be updated
in case of return status as success as well.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Anbazhagan Baraneedharan <anbazhagan@hp.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
V1 changes:
> Current code logic can't confirm CpuS3DataDxe driver start before
> CpuFeaturesDxe driver. So the assumption in CpuFeaturesDxe not valid.
> Add implementation for AllocateAcpiCpuData function to remove this
> assumption.
V2 changes:
> Because CpuS3Data memory will be copy to smram at SmmReadToLock point,
> so the memory type no need to be ACPI NVS type, also the address not
> limit to below 4G.
> This change remove the limit of ACPI NVS memory type and below 4G.
V3 changes:
> Remove function definition in header file.
> Add STATIC in function implementation.
Pass OS boot and resume from S3 test.
Bugz: https://bugzilla.tianocore.org/show_bug.cgi?id=959
Reported-by: Marvin Häuser <Marvin.Haeuser@outlook.com>
Suggested-by: Fan Jeff <vanjeff_919@hotmail.com>
Cc: Marvin Häuser <Marvin.Haeuser@outlook.com>
Cc: Fan Jeff <vanjeff_919@hotmail.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Because PrepareApStartupVector() stores StackAddress to
"mExchangeInfo->StackStart" (which has type (VOID*)), and because
"UefiCpuPkg/PiSmmCpuDxeSmm/X64/MpFuncs.nasm" reads the latter with:
add edi, StackStartAddressLocation
add rax, qword [edi]
mov rsp, rax
mov qword [edi], rax
in long-mode code. So code can remove below 4G limitation.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Because CpuS3Data memory will be copy to smram at SmmReadyToLock point,
the memory type no need to be ACPI NVS type, also the address not
limit to below 4G.
This change remove the limit of ACPI NVS memory type and below 4G.
Pass OS boot and resume from S3 test.
Cc: Marvin Häuser <Marvin.Haeuser@outlook.com>
Cc: Fan Jeff <vanjeff_919@hotmail.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
ACPI_CPU_DATA structure first introduced to save data in
normal boot phase. Also this data will be used in S3 phase
by one PEI driver. So in first phase, this data is been
defined to use ACPI NVS memory type and must below 4G.
Later in order to fix potential security issue,
PiSmmCpuDxeSmm driver added logic to copy ACPI_CPU_DATA
(except ResetVector and Stack buffer) to smram at smm
ready to lock point. ResetVector must below 1M and Stack
buffer is write only in S3 phase, so these two fields not
copy to smram. Also PiSmmCpuDxeSmm driver owned the task
to restore the CPU setting and it's a SMM driver.
After above change, the acpi nvs memory type and below 4G
limitation is no longer needed.
This change remove the limitation in the comments for
ACPI_CPU_DATA definition.
Cc: Marvin Häuser <Marvin.Haeuser@outlook.com>
Cc: Fan Jeff <vanjeff_919@hotmail.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Current implementation will copy GDT/IDT at SmmReadyToLock point
from ACPI NVS memory to Smram. Later at S3 resume phase, it restore
the memory saved in Smram to ACPI NVS. It can directly use GDT/IDT
saved in Smram instead of restore the original ACPI NVS memory.
This patch do this change.
Test Done:
Do the OS boot and S3 resume test.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
the call statement of _CheckDuplicateInFV() was commented out
in 2014. There is no call statement of _CheckDuplicateInFV(),
so remove it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When packing HiiPcd into PcdNvStoreDefaultValueBuffer,
The boolean type pcd value packing incorrect.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
2018-08-16 08:32:57 +08:00
2727 changed files with 199079 additions and 297819 deletions
CharCount=AsciiSPrint(Buffer,sizeof(Buffer),"\nRecursive exception occurred while dumping the CPU state\n");
SerialPortWrite((UINT8*)Buffer,CharCount);
STATICCHAR8CONSTMessage[]="\nRecursive exception occurred while dumping the CPU state\n";
SerialPortWrite((UINT8*)Message,sizeofMessage-1);
if(gST->ConOut!=NULL){
AsciiPrint(Message);
}
CpuDeadLoop();
}
mRecursiveException=TRUE;
CharCount=AsciiSPrint(Buffer,sizeof(Buffer),"\n\n%a Exception at 0x%016lx\n",gExceptionTypeString[ExceptionType],SystemContext.SystemContextAArch64->ELR);
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
