Don't set PcdDebugPropertyMask for release builds, and properly set it
for debug builds based on SOURCE_DEBUG_ENABLE.
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Tianocore currently reads/writes a lot of NVRAM variables that
don't actually need to be saved. Occasionally some, specifically
related to the graphical/serial consoles, can become corrupted,
leading to a bricked device. To avoid this, temporarily restrict
the reading/writing of variables to Bootorder related ones
(starting with 'Boot') until a better solution can be found.
Test: build/boot google/eve, inject "bad" NVRAM data, observe
device boots normally instead of hanging with no display detected.
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
update compiled driver with one that doesn't hang on systems
built without CONFIG_SMMSTORE=y in coreboot.
Test: build/boot google/kahlee with and w.o SMMSTORE enabled
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Add support for Bayhub eMMC controller found on AMD
Stoneyridge Chromebooks.
Test: build/boot various google/kahlee-based devices
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Add/use System76 firmware-smmstore driver, to compact
the smmstore NVRAM variables. Helps prevent corruption
of NVRAM variables leading to boot hang.
Compiled from system76/firmware-smmstore commit 2e94590
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Make it possible to delete a variable by appending it with
size 0. Also ignore keysizes of 0 when reading variables.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
For Baytrail devices, coreboot leaves the eMMC/SD in PCI mode to enable
detection by Tianocore, so put into ACPI mode before OS boots.
Fixes booting on Baytrail devices.
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Check SMM store return code and return on error.
Fixes significant boot delay in case no SMM store is present.
This can happend quite often if the tianocore payload is build standalone
and patched into a coreboot ROM.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Add entries for Aleena, Barla, Careena, Kasumi, Liara.
Remove unused entry for Purism Librem 13v2 since not a
Google device.
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Some USB keyboards, like the Aspeed BMC HID keyboard,
require the SetIdle command to be issued before interrupt
transfers can be enabled. Add a quirk handler so any similar
devices can make use of same function by the addition of the
USB vendor/device IDs.
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
No need to check the interface protocol then conditionally setting,
just set it to BOOT_PROTOCOL and check for error.
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
The endpoint selected by the driver needs to not
only be an interrupt type, but have direction IN
as required to set up an asynchronous interrupt transfer.
Currently, the driver assumes that the first INT endpoint
will be of type IN, but that is not true of all devices,
and will silently fail on devices which have the OUT endpoint
before the IN. Adjust the endpoint selection loop to explictly
check for direction IN.
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
The endpoint selected by the driver needs to not
only be an interrupt type, but have direction IN
as required to set up an asynchronous interrupt transfer.
Currently, the driver assumes that the first INT endpoint
will be of type IN, but that is not true of all devices,
and will silently fail on devices which have the OUT endpoint
before the IN. Adjust the endpoint selection loop to explictly
check for direction IN.
Test: detachable keyboard on Google Pixel Slate now works.
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Fixes some device name strings not being copied due to
exceeding max size (but not size of buffer passed in)
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Query boot devices and obtain make/model info if
available. Prefix description with device type
for better identification.
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Copy BmBootDescription from MdeModulePkg/UefiBootManagerLib,
removing appending of serial # since it makes descriptions
unweildy.
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
- center device name; left-justify other info
- remove Language and Device Manager options
- rename 'Continue' to 'Default Boot'
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
With Boot Manager now renamed, rename BMM as well.
Also clean up and simplify menu to eliminate unused/non-
functional items.
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Unlike the InstallMultipleProtocolInterfaces() boot service, which takes
an (EFI_HANDLE*) as first parameter, the
UninstallMultipleProtocolInterfaces() boot service takes an EFI_HANDLE as
first parameter.
These are actual bugs. They must have remained hidden until now because
they are on error paths. Fix the UninstallMultipleProtocolInterfaces()
calls.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Until now, during the USB device enumeration when its PortState
USB_PORT_STAT_CONNECTION bit was not set, the stack was not informed
that the device is not present. Fix that by returning appropriate
error code.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Add support for allocating aligned pages at an alignment higher
than 4K. The new function allocated memory taking into account
the padding required and then frees up unused pages before mapping
it.
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
While allocating pages aligned at an alignment higher than
4K, allocate memory taking into consideration the padding
required for that alignment. The calls to free pages takes
care of this already.
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Fix an assertion that prevented the boot menu to show up when the coreboot
string is very long.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1621
According to Intel SDM as below, the BIT0 should be treated as
lock bit, and BIT1 should be treated as disable(1)/enable(0) bit.
"11b: AES instructions are not available until next
RESET.
Otherwise, AES instructions are available.
If the configuration is not 01b, AES
instructions can be mis-configured if a privileged agent
unintentionally writes 11b"
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Microsoft user experience specifications recommend the boot logo is drawn 38.2%
from the top of the screen. This is also where operating systems like Fedora
expect the logo to be drawn.
Signed-off-by: James Ye <jye836@gmail.com>
No reason to hardcode the image size into the
positon calculations. Keep shift to upper 2/3
of screen.
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
BMP files by tools other than MS paint can have a
variable number of padding bytes, which results in
the DataSize being less than (ImageSize - HeaderSize).
Fix the check to be less stringent.
Test: use BMP created by/saved by Photoshop
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
CorebootModulePkg version is buggy and unmaintained, switching
to MdeModulePkg version fixes channel count / drive detection
issue on some KBL Chromeboxes
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
changed: buffer size from 64k to 256k
Change-Id: I7f443b9f36612f79787e1b4b1075176a91107686
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Since board names match the device, just print manufacturer
and device name without translation.
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
From stepan:
"This enables eMMC booting when starting edk2
from depthcharge. Previously the driver would
bail out with an error while setting the eMMC
frequency, because depthcharge has already set
up the controller."
Also fixed detection on google/lars w/Core-i5
with upstream coreboot + Tianocore payload
Since the memory test is essentially instantanous,
remove unnecessry duplication of memory count and
static status bar for cleaner display with coreboot logo
Tianocore's PCI enumeration goes into an infinite loop, and
isn't necessary since coreboot has already handled it.
Copy and use DuetPkg's PciNoEnumeration package (which has
since been removed).
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Add function to allow enabling and disabling of the clock using the SCMI
interface. Add gArmScmiClock2ProtocolGuid to distinguish platforms that
support new API from those that just have the older protocol.
SCMI_CLOCK2_PROTOCOL also adds a version parameter to allow for future
changes. It is placed after the functions that are present in the
existing protocol to allow SCMI_CLOCK2_PROTOCOL to be cast to
SCMI_CLOCK_PROTOCOL so that only a single implementation of those
function are needed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Use an untyped PCD reference for PcdSerialRegisterBase, so that the
library gets built without hardcoded values, permitting modules to
override the default serial port. This allows SerialDxe to use a
different serial port from the one used for DEBUG output (which
often gets occluded due to the console driver clearing the screen).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Even though UEFI does not appear to use it, let's implement the
complete PI watchdog protocol, including handler registration,
which will be invoked before the ResetSystem() runtime service
when the watchdog timer expires.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Clean up the code, by adding missing STATIC modifiers, drop
redundant casts, and get rid of the 'success handling' anti
pattern in the entry point code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The SP805 watchdog driver doesn't implement the PI watchdog protocol
fully, but always simply resets the system if the watchdog time runs
out.
However, the hardware does support the intended usage model, as long
as the SP805 is wired up correctly. So let's implement interrupt based
mode involving a handler that is registered by the DXE core and invoked
when the watchdog runs out. In the interrupt handler, we invoke the
notify function if one was registered, before calling the ResetSystem()
runtime service (as per the UEFI spec)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Before fixing the SP805 driver, let's clean it up a bit. No
functional changes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Instead of #defining MAX_ALLOC_ADDRESS to MAX_ADDRESS as intended,
it is #defined to itself, causing all ARM builds to break.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The current ArmVirtMemoryInitPeiLib code splits the memory region passed
via PcdSystemMemoryBase/PcdSystemMemorySize in two if the region extends
beyond the MAX_ADDRESS limit. This was introduced for 32-bit ARM, which
may support more than 4 GB of physical address space, but cannot address
all of it via a 1:1 mapping, and a single region that is not mappable
in its entirety is unusable by the PEI core.
AArch64 is in a similar situation now: platforms may support more than
256 TB of physical address space, but only 256 TB is addressable by the
CPU, and so a memory region that extends from below this limit to above
it should be split.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Limit the PEI memory region so it will not extend beyond what we can
address architecturally when running with 4 KB pages.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
When creating the page tables for the 1:1 mapping, ensure that we don't
attempt to map more than what is architecturally permitted when running
with 4 KB pages, which is 48 bits of VA. This will be reflected in the
value of MAX_ALLOC_ADDRESS once we override it for AArch64, so use that
macro instead of MAX_ADDRESS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Take MAX_ALLOC_ADDRESS into account in the implementation of the
page allocation routines, so that they will only return memory
that is addressable by the CPU at boot time, even if more memory
is available in the GCD memory map.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Update the GCD memory map initialization code so it disregards
memory that is not addressable by the CPU at boot time. This
only affects the first memory descriptor that is added, other
memory descriptors are permitted that describe memory ranges
that may be accessible to the CPU itself only when executing
under the OS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
On some architectures, the maximum representable address deviates from
the virtual address range that is accessible by the firmware at boot
time. For instance, on AArch64, UEFI mandates a 4 KB page size, which
limits the address space to 48 bits, while more than that may be
populated on a particular platform, for use by the OS.
So introduce a new macro MAX_ALLOC_ADDRESS, which represent the maximum
address the firmware should take into account when allocating memory
ranges that need to be accessible by the CPU at boot time.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Ensure that we prevent the CPU from proceeding after having taken an
unhandled exception on a RELEASE build, which does not contain the
ASSERT() which ensures this on DEBUG and NOOPT builds.
Retain the code following the deadloop so that we can keep going when
running in a debugger.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The ARM linker may emit veneers, i.e., trampolines, when ordinary
direct relative branches cannot be used, e.g., for Thumb interworking
or branch targets that are out of range.
Usually, such veneers carry an absolute reference to the branch
target, which is problematic for us, since these absolute references
are not covered by annotations that are visible to GenFw in the
PE/COFF conversion, and so these absolute references are not fixed
up by the PE/COFF loader at runtime.
So switch to all ARM GNU ld toolchains to position independent veneers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The GdbDebugAgent library is unused and unmaintained, and now it
turns out it doesn't build with Clang, so let's just get rid of it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The following Pcds
- gArmTokenSpaceGuid.PcdArmLinuxSpinTable
- gArmTokenSpaceGuid.PcdArmLinuxAtagMaxOffset
- gArmTokenSpaceGuid.PcdArmLinuxFdtMaxOffset
- gArmTokenSpaceGuid.PcdArmLinuxFdtAlignment
remained defined, without actual users.
So get rid of them.
One reference to be deleted separately from edk2-platforms.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fix a bug because of b3497bad12.
Before the patch, when GenFds fail, the build continue and return success.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1405
Background as below.
Problem:
As static configuration from the PCDs, the binary PeiCore (for example
in FSP binary with dispatch mode) could not predict how many FVs,
Files or PPIs for different platforms.
Burden:
Platform developers need configure the PCDs accordingly for different
platforms.
To solve the problem and remove the burden, we can update code to
remove the using of PcdPeiCoreMaxFvSupported, PcdPeiCoreMaxPeimPerFv
and PcdPeiCoreMaxPpiSupported by extending buffer dynamically for FV,
File and PPI management.
This patch removes the using of PcdPeiCoreMaxPpiSupported in PeiCore.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1405
Background as below.
Problem:
As static configuration from the PCDs, the binary PeiCore (for example
in FSP binary with dispatch mode) could not predict how many FVs,
Files or PPIs for different platforms.
Burden:
Platform developers need configure the PCDs accordingly for different
platforms.
To solve the problem and remove the burden, we can update PeiCore to
remove the using of PcdPeiCoreMaxFvSupported, PcdPeiCoreMaxPeimPerFv
and PcdPeiCoreMaxPpiSupported by extending buffer dynamically for FV,
File and PPI management.
This patch removes the using of PcdPeiCoreMaxFvSupported in PeiCore.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1405
Background as below.
Problem:
As static configuration from the PCDs, the binary PeiCore (for example
in FSP binary with dispatch mode) could not predict how many FVs,
Files or PPIs for different platforms.
Burden:
Platform developers need configure the PCDs accordingly for different
platforms.
To solve the problem and remove the burden, we can update PeiCore to
remove the using of PcdPeiCoreMaxFvSupported, PcdPeiCoreMaxPeimPerFv
and PcdPeiCoreMaxPpiSupported by extending buffer dynamically for FV,
File and PPI management.
This patch removes the using of PcdPeiCoreMaxFvSupported in Tcg(2)Pei.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1405
Background as below.
Problem:
As static configuration from the PCDs, the binary PeiCore (for example
in FSP binary with dispatch mode) could not predict how many FVs,
Files or PPIs for different platforms.
Burden:
Platform developers need configure the PCDs accordingly for different
platforms.
To solve the problem and remove the burden, we can update code to
remove the using of PcdPeiCoreMaxFvSupported, PcdPeiCoreMaxPeimPerFv
and PcdPeiCoreMaxPpiSupported by extending buffer dynamically for FV,
File and PPI management.
This patch removes the using of PcdPeiCoreMaxPeimPerFv in PeiCore.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
current edk2\BaseTools\Conf\build_rule.template, the compile of nasm
source files does not have the $(INC) support.
The '-I' option only includes the directory of the nasm source file
(${s_path}(+)). Hence, it will be impossible for nasm files to include
files outside of the nasm source file directory.
As a comparison, the compile of both .s and .asm have $(INC) support
in their compile commands.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=1085
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1390
1. support hex number for array index
2. support Non-Dynamic Pcd for array data type
3. support {} and {CODE()} for array data type
4. Change GetStructurePcdMaxSize to be a static function since it need to
be called in another static function. And this function does not depend on
it's class instance.
5. Add unittest for RemoveCComments function and
ArrayIndex regular expression.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Philippe Mathieu-Daud? <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Commit 9a67ba261f ("ArmVirtPkg: Replace obsoleted network drivers
from platform DSC/FDF") incorrectly added the BaseCryptLib, OpensslLib
and IntrinsicLib to "ArmVirtPkg/ArmVirtQemuKernel.dsc", it's redundant
and the library instances from "ArmVirt.dsc.inc" is already sufficient.
This patch also adjust the order of network drivers in "ArmVirtPkg/
ArmVirtQemuFvMain.fdf.inc" to make it same as the DSC file.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
UEFI SCT crashed and failed in NonDiscoverablePciDeviceDxe becase
required checks were not performed. Perform parameters validation in
NonDiscoverablePciDeviceDxe.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
Our default is already armv7-a, so no need to rewrite the PLATFORM_FLAGS
for that. Also, setting -mfpu=neon is not entirely inappropriate, since
NEON is not mandatory under v7.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Commit 9a67ba261f ("ArmVirtPkg: Replace obsoleted network drivers
from platform DSC/FDF") failed to take into account that the now
unconditionally included IScsiDxe.inf from NetworkPkg requires a
resolution for TcpIoLib. Since specifying such a resolution is harmless
for platforms that have no networking enabled, let's just fix things
by dropping the conditionals around it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This patch replaces the MdeModulePkg TCP, PXE and iSCSI driver with those
ones in NetworkPkg. These 3 drivers in MdeModulePkg are not being actively
maintained and will be removed from edk2 master soon.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Drop the -mno-movt command line option override, which is no longer
needed, and actually incompatible with versions of Clang before 3.6.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PE/COFF only has a very limited id space for runtime relocations, and
so it defines only a single relocation for movw/movt instruction pairs,
which can be combined to load a 32-bit symbol reference into a register.
For this to work as expected, these instructions must always appear in
the same order and adjacently, and this is something few compilers take
into account, unless they target PE/COFF explicitly (and this is not the
case for our ELF based toolchains)
For Clang 3.6 and later, we can pass the -mno-movt option to suppress
movw/movt pairs entirely, which works around the issue. Unfortunately,
for Clang 3.5, the option is called differently (-mllvm -arm-use-movt=0)
and mutually incompatible between 3.5 and 3.6.
Since it is desirable for the CLANG35 toolchain to be usable on newer
versions of Clang as well (given that it is the only non-LTO alternative
to CLANG38), let's work around this issue in a way that permits versions
3.5 and newer of Clang to be used with the CLANG35 profile.
So pass the -mkernel flag instead (and add -Qunused-argument so Clang
does not complain about the -mno-unaligned-access in ARM_CC_XIPFLAGS).
This also inhibits movw/movt generation, along with some other changes
(e.g., long calls) which do affect code generation but not in an
undesirable manner.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
ARM uses the low order bit of a branch target address to decide in
which execution mode (ARM or Thumb) a function needs to be called.
In order for this to work across object files, ELF function symbols
will have the low bit set if they were emitted in Thumb mode and
cleared otherwise. This annotation is only emitted if the ELF symbols
are annotated as function, since taking the address of some data
symbol (e.g., a literal) should not produce a value with the low bit
set, even if it appears in an object file containing Thumb code.
This means that all functions coded in assembler must have this
function annotation, or they may end up getting called in the
wrong mode, crashing the program.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
We currently permit R_ARM_GOT_PREL relocations in the ELF32 conversion
routines, under the assumption that relative relocations are fine as
long as the section layout is the same between ELF and PE/COFF.
However, as is the case with any proxy generating relocation, it is
up to the linker to emit an entry in the GOT table and populate it
with the correct absolute address, which should also be fixed up at
PE/COFF load time. Unfortunately, the relocations covering the GOT
section are not emitted into the static relocation sections processed
by GenFw, but only in the dynamic relocation section as a R_ARM_RELATIVE
relocation, and so GenFw fails to emit the correct PE/COFF relocation
data for GOT entries.
Since GOT indirection is pointless anyway for PE/COFF modules running
in UEFI context, let's just drop the references to R_ARM_GOT_PREL from
GenFw, resulting in a build time failure rather than a runtime failure
if such relocations do occur.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The self-relocating PrePi module that is used by the ArmVirtQemuKernel
and ArmVirtXen targets runs the linker in PIE mode so that it emits
dynamic relocations into the final image in a way that permits the
module to relocate itself into place before calling into the C code.
When building these targets using the CLANG38 toolchain, we switch
from the BFD to the GOLD linker, which behaves a bit differently when
building PIE executables, and insists on emitting GOT indirected symbol
references throughout, which means a) that we end up with absolute
addresses (which need to be fixed up at load time) for no good reason,
and b) we have to add support for handling GOT entries to GenFw if we
want to convert them into PE/COFF.
So instead, let's emit a shared library. Since the ELF image only serves
as the input to GenFw, this does not lead to any loss of functionality,
although it does require the -Bsymbolic linker option to be added to
ensure that no symbol based dynamic relocations are emitted (which
would, e.g., permit lazy binding for shared libraries). So for all
other toolchains, the linker option changes are a no-op.
Then, we have to convince CLANG38/GOLD that there is no need to refer
to symbols via a GOT entry. This is done by forcing hidden visibility
for all symbols in all components that make up the PrePi SEC module:
this informs the linker that a symbol is never exported or preempted,
making it safe to refer to it directly from anywhere in the code,
rather than indirectly via a GOT entry.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Move some PCD settings outs of the [PcdsFixedAtBuild.AARCH64] block,
so that they apply to 32-bit ARM as well. Without this change, the
ARM build doesn't work.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Since 4 KB section alignment is required when mapping PE/COFF images
with strict permissions, update the default section alignment when
using GCC49 and GCC5 in RELEASE mode. Note that XIP modules such as
SEC, PEIMs or PEI core are not affected by this change, since the
override to 32 byte aligment remains in effect.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Struct packing is only necessary for data structures whose in-memory
representation is covered by the PI or UEFI specs, and may deviate
from the ordinary C rules for alignment.
So in case of FileExplorerLib, this applies to the device path struct
only, and other structures used to carry program data should not be
packed, or we may end up with alignment faults on architectures such
as ARM, which don't permit load/store double or multiple instructions
to access memory locations that are not 32-bit aligned.
E.g., the following call in FileExplorerLibConstructor()
InitializeListHead (&gFileExplorerPrivate.FsOptionMenu->Head);
which is emitted as follows for 32-bit ARM/Thumb2 by Clang-5.0
3de0: b510 push {r4, lr}
3de2: 4604 mov r4, r0
...
3de8: e9c4 4400 strd r4, r4, [r4]
3dec: bd10 pop {r4, pc}
will perform a double-word store on the first argument, passed in
register r0, assuming that the pointer type of the argument is
enough to guarantee that the value is suitably aligned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1376
Today's implementation reuses the 32bit MMIO resource requested by
all PCI devices MMIO BARs when shadowing the option ROM.
Take a simple example, a system has only one PCI device. It requires
8MB 32bit MMIO and contains a 4MB option ROM. Today's implementation
only requests 8MB (max of 4M and 8M) 32bit MMIO from
PciHostBridgeResourceAllocation protocol. Let's assume the MMIO range
[3GB, 3GB+8MB) is allocated. The 3GB base address is firstly
programmed to the option ROM BAR for option ROM shadow. Then the
option ROM decoding is turned off and 3GB base address is programmed
to the 32bit MMIO BAR.
It doesn't cause issues when the device doesn't request too much
MMIO.
But when the device contains a 64bit MMIO BAR which requests 4GB MMIO
and a 4MB option ROM. Let's assume [3GB, 3GB+8MB) 32bit MMIO range is
allocated for the option ROM. When the option ROM is being shadowed,
64bit MMIO BAR is programmed to value 0, which means [0, 4GB) MMIO is
given to the 64bit BAR.
The range overlaps with the option ROM range which may cause the
device malfunction (e.g.: option ROM cannot be read out) when the
device has two separate decoders: one for MMIO BAR, the other for
option ROM.
The patch requests dedicated MEM32 resource for Option ROMs and
moves the Option ROM shadow logic after all MMIO BARs are programmed.
The MMIO BAR setting to 0 when shadowing Option ROM is also skipped
because the MMIO BAR already contains the correct value.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
The StandaloneMM image executes in S-EL0 on reference Arm platforms
and is deployed by the trusted firmware as BL32 image. Memory for the
Standalone MM drivers is marked as RW+XN initially, allowing the
drivers to be loaded into the memory. Once loaded, the memory
attributes need to be changed to RO+XN for rodata sections and RO+X
for code sections.
Achieve this through the extra action 'UpdatePeCoffPermissions' to
request the privileged firmware in EL3 to update the permissions.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
The MMU functions needed for StandaloneMM image are now exported
through a separate library class. Make the corresponding change in the
core's entry point inf file so that it references the correct library
class for modifying the MMU attributes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Introduction of the -mstrict-align flag results in GCC attempting
to use memset to zero out the InitMmFoundationSvcArgs structure.
In the absence of this C library function, this patch explicitly
zeroes this data structure prior to use.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
On AArch64, Standalone MM during the SEC phase runs in S-EL0 with
SCTLR_EL1.A=1. This patch adds the -mstrict-align compiler flag to
ensure that the generated code is compliant with the runtime
alignment checks.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
This patch fixes the dependency PL011UartLib has on PL011UartClockLib by
including its implementation path in the StandaloneMm DSC file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
This reverts commit 82379bf660.
On AArch64, we can only use 48 address bits while running in UEFI,
while the GCD and UEFI memory maps may describe up to 52 bits of
physical address space. For this reason, MAX_ADDRESS was reduced
to 48 bits, to ensure that the firmware does not inadvertently
attempt to allocate memory that we cannot access.
However, MAX_ADDRESS is used in runtime drivers as well, and
runtime drivers may deal with kernel virtual addresses, which have
bits [63:48] set. In fact, the OS may be running with 64 KB pages
and pass addresses into the runtime services that use up to 52
bits of address space, either with the top bits set or cleared,
even if the physical address space does not extend beyond 48 bits.
In summary, changing MAX_ADDRESS is a mistake, and needs to be
reverted.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1288
This patch is one of build tool performance improvement
series patches.
This patch is going to customize the deepcopy function for
SkuClass, PcdClassObject and python dictionary.
python deepcopy copy everything of a object, but for our current
usage we just need to copy the data we care about recursively.
By implementing __deepcopy__ for SkuClass, PcdClassObject, we can customize
deepcopy function for them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: BobCF <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1288
This patch is one of build tool performance improvement
series patches.
This patch is going to use join function instead of
string += string2 statement.
Current code use string += string2 in a loop to combine
a string. while creating a string list in a loop and using
"".join(stringlist) after the loop will be much faster.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: BobCF <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1288
[V2]
Optimize this patch so that it can be easy to review.
This patch is just apply the change to original files while
not create new similar files.
[V1]
This patch is one of build tool performance improvement
series patches.
This patch is going to use python list to store the parser data
instead of using sqlite database.
The replacement solution is as below:
SQL insert: list.append()
SQL select: list comprehension. for example:
Select * from table where field = “something”
->
[ item for item in table if item[3] == “something”]
SQL update: python map function. for example:
Update table set field1=newvalue where filed2 = “something”.
-> map(lambda x: x[1] = newvalue,
[item for item in table if item[2] == “something”])
SQL delete: list comprehension.
With this change, We can save the time of interpreting SQL statement
and the time of write database to file system
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: BobCF <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
V2:
Extract the common part of new API and the original main() function
into one function.
V1:
https://bugzilla.tianocore.org/show_bug.cgi?id=1288
Currently, AutoGen and GenFds run in different python interpreters. The
parser are duplicated. This patch is going to create new API for GenFds
and have the build to call that API instead of executing GenFds.py. As
such, the GenFds and build can share the parser data.
This patch is expected to save the time of GenFds about 2~3 seconds.
More details will be logged in BZ.
This is the summary measure data generated from python cProfile for
building Ovmf.
Currently:
8379147 function calls (8135450 primitive calls) in 12.580 seconds
After applying this patch:
3428712 function calls (3418881 primitive calls) in 8.944 seconds
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Carsey Jaben <jaben.carsey@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
V2:
Fixed the issue that V1 adds new check
to the Pcds in the platform unused library INF files.
It breaks the existing platform.
V1?
The current code handle all the structure pcds
even if there is no module or library use them.
This patch is going to filter out the unused structure pcds.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add dummy RPC handler for RPCs that are not implemented as control
should be returned back to OP-TEE in case any RPC is invoked.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
1) remove an identical function and import it from Common.LongFilePathSupport
2) remove an import that is not needed/used.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by : Bob Feng <bob.c.feng@intel.com>
The macro MAX_ADDRESS represents the largest virtual address that
is valid for a certain architecture. For the BaseTools, this quantity
is irrelevant, since the same tools can be used to build for different
targets.
Since we only refer to it in a single place, which is an ASSERT() that
doesn't seem particularly useful (it ensures that memcpy() will not
be called with arguments that will make it read beyond the end of the
address space and wrap around), let's drop the ASSERT and all references
to MAX_ADDRESS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The maximum value that can be represented by the native word size
of the *target* should be irrelevant when compiling tools that
run on the build *host*. So drop the definition of MAX_UINTN, now
that we no longer use it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Parsing a string into an integer variable of the native word size
is not defined for the BaseTools, since the same tools may be used
to build firmware for different targets with different native word
sizes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Replace the default size limit of IsDevicePathValid() with a value
that does not depend on the native word size of the build host.
4 GiB seems sufficient as the upper bound of a device path handled
by UEFI.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Since we will be dropping the definition of MAX_UINTN, whose meaning
is ambiguous for the BaseTools, add a definition of MAX_UINT32 that
we can switch to.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Replace invocations of StrHexToUintn() with StrHexToUint64(), so
that we can drop the former.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Don't use the native word size string to number parsing routines,
but instead, use the 64-bit one and cast to UINTN.
Currently, the only user is in Source/C/DevicePath/DevicePathFromText.c
which takes care to use Strtoi64 () unless it assumes the value fits
in 32-bit, so this change is a no-op even on 32-bit build hosts.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In the context of the BaseTools, there is no such thing as a native word
size, given that the same set of tools may be used to build a firmware
image consisting of both 32-bit and 64-bit modules.
So update StrToIpv4Address() and StrToIpv6Address() to use UINT64
types instead of UINTN types when parsing strings.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
As Yonghong has some other focus, change him from maintainer
to reviewer, Bob will be the new maintainer.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
QEMU/mach-virt is rather unhelpful when it comes to tracking down
NULL pointer dereferences that occur while running in UEFI: since
we have NOR flash mapped at address 0x0, inadvertent reads go
unnoticed, and even most writes are silently dropped, unless you're
unlucky and the instruction in question is one that KVM cannot
emulate, in which case you end up with a QEMU crash like this:
error: kvm run failed Function not implemented
PC=000000013f7ff804 X00=000000013f7ab108 X01=0000000000000064
X02=000000013f801988 X03=00000000800003c4 X04=0000000000000000
X05=0000000096000044 X06=fffffffffffd8270 X07=000000013f7ab4a0
X08=0000000000000001 X09=000000013f803b88 X10=000000013f7e88d0
X11=0000000000000009 X12=000000013f7ab554 X13=0000000000000008
X14=0000000000000002 X15=0000000000000000 X16=0000000000000000
X17=0000000000000000 X18=0000000000000000 X19=0000000000000000
X20=000000013f81c000 X21=000000013f7ab170 X22=000000013f81c000
X23=0000000009000018 X24=000000013f407020 X25=000000013f81c000
X26=000000013f803530 X27=000000013f802000 X28=000000013f7ab270
X29=000000013f7ab0d0 X30=000000013f7fee10 SP=000000013f7a6f30
PSTATE=800003c5 N--- EL1h
and a warning in the host kernel log that load/store instruction
decoding is not supported by KVM.
Given that the first page of the flash device is not actually
used anyway, let's reduce the mappings of the peripheral space
and the flash device (both of which cover page #0) to only cover
what is actually required:
ArmVirtQemu.fdf:
> 0x00001000|0x001ff000
> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
ArmVirtQemuKernel.fdf:
> 0x00008000|0x001f8000
> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
For ArmVirtQemu, the resulting virtual mapping looks roughly like:
- [0, 4K) : flash, unmapped
- [4K, 2M) : flash, mapped as WB+X RAM
- [2M, 64M) : flash, unmapped
- [64M, 128M) : varstore flash, will be mapped by the NOR flash driver
- [128M, 256M) : peripherals, mapped as device
- [256M, 1GB) : 32-bit MMIO aperture, translated IO aperture, ECAM,
will be mapped by the PCI host bridge driver
- [1GB, ...) : RAM, mapped.
After this change, any inadvertent read or write from/to the first
physical page will trigger a translation fault inside the guest,
regardless of the nature of the instruction, without crashing QEMU.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The primary FV contains the firmware boot image, which is not
runtime updatable in our case. So exposing it to the NOR flash
driver is undesirable, since it may attempt to modify the NOR
flash contents. It is also rather pointless, since we don't
keep anything there that we care to expose. (the SEC and PEI
phase modules are not executable from DXE context, and the
contents of the embedded DXE phase FV are exposed by the DXE
core directly via the FVB2 protocol)
So let's disregard the NOR flash block that covers the primary
FV.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The ARM ArmMmuLib code currently does not take into account that
setting permissions on a region should take into account that a
region may not be mapped yet to begin with.
So when updating a section descriptor whose old value is zero,
pass in the address explicitly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
GetMemoryRegion() is used to obtain the attributes of an existing
mapping, to permit permission attribute changes to be optimized
away if the attributes don't actually change.
The current ARM code assumes that a section mapping or a page mapping
exists for any region passed into GetMemoryRegion(), but the region
may be unmapped entirely, in which case the code will crash. So check
if a section mapping exists before dereferencing it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
PcdPrePiCpuMemorySize is no longer used so drop the declarations from
the package DEC file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
PcdPrePiCpuMemorySize is no longer used so drop the PCD overrides
from all platform descriptions in ArmVirtPkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Drop the reference to gEmbeddedTokenSpaceGuid.PcdPrePiCpuMemorySize
which is never used.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Drop some PCD references that are not actually referenced from the
PlatformPei code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Derive the size of the GCD memory space map directly from the CPU's
information registers rather than from the PcdPrePiCpuMemorySize PCD,
which will be removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Derive the size of the GCD memory space map directly from the CPU's
information registers rather than from the PcdPrePiCpuMemorySize PCD,
which will be removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Derive the size of the GCD memory space map directly from the CPU's
information registers rather than from the PcdPrePiCpuMemorySize PCD,
which will be removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Derive the size of the GCD memory space map directly from the CPU's
information registers rather than from the PcdPrePiCpuMemorySize PCD,
which will be removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In preparation of dropping PcdPrePiCpuMemorySize entirely, base the
maximum size of the identity map on the capabilities of the CPU.
Since that may exceed what is architecturally permitted when using
4 KB pages, take MAX_ADDRESS into account as well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Use the new ArmLib helper to read the CPU's physical address limit
so we can drop our own homecooked one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add a helper function that returns the maximum physical address space
size as supported by the current CPU.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
AArch64 supports the use of more than 48 bits for physical and/or
virtual addressing, but only if the page size is set to 64 KB,
which is not supported by UEFI. So redefine MAX_ADDRESS to cover
only 48 address bits.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Currently, we map DRAM as EFI_MEMORY_WB, and the remainder of the
entire virtual address space is mapped with EFI_MEMORY_UC attributes,
regardless of whether any devices actually reside there.
Now that we are relaxing the address space limit to more than 40 bits,
mapping all that address space actually takes up more space in page
tables than we have so far made available as temporary RAM. So let's
get rid of the mapping rather than increasing the available RAM, given
that the mapping is not particularly useful anyway.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Up until now, we have been getting away with not declaring the ECAM
and translated I/O spaces at all in the GCD memory map, simply because
we map the entire address space with device attributes in the early PEI
code, and so the ECAM space will be mapped wherever it ends up.
Now that we are about to make changes to how ArmVirtQemu reasons
about the size of the address space, it would be better to get rid
of this mapping of the entire address space, since it can get
arbitrarily large without real benefit.
So start by mapping the ECAM and translated I/O spaces explicitly,
instead of relying on the early PEI mapping.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Drop the declaration and the implementation of CreateHoblist(),
which is not used anywhere.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Remove this module: it is unused, and should not be used as an
example going forward.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
As Star has some other focus, change Star from maintainer
to reviewer, Jian will be the first maintainer, and add
Hao as the second maintainer.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Acked-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Jian J Wang <jian.j.wang@intel.com>
This function is exposed by the MemoryAllocationLib header.
An AllocateZeroPool() function has been added to fix modules depending on
this library and this function.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1297
When the header files are not found for the used C structure, this script will
report the warning, let user know there is no header file to define C structure.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wang BinX A <binx.a.wang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In V2, change his to the, and add new maintainers follow up.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
While this isn't the only Aarch64 directory in the tree, let's
keep from adding more of them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
ArmMmuStandaloneMmLib.inf cannot be built for ARM so move it to the
[Components.AARCH64] section in ArmPkg.dsc.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The Standalone MM environment runs in S-EL0 in AArch64 on ARM Standard
Platforms. Privileged firmware e.g. ARM Trusted Firmware sets up its
architectural context including the initial translation tables for the
S-EL1/EL0 translation regime. The MM environment will still request ARM
TF to change the memory attributes of memory regions during
initialization.
The Standalone MM image is a FV that encapsulates the MM foundation
and drivers. These are PE-COFF images with data and text segments.
To initialise the MM environment, Arm Trusted Firmware has to create
translation tables with sane default attributes for the memory
occupied by the FV. This library sends SVCs to ARM Trusted Firmware
to request memory permissions change for data and text segments.
This patch adds a simple MMU library suitable for execution in S-EL0 and
requesting memory permissions change operations from Arm Trusted Firmware.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
PI v1.5 Specification Volume 4 defines Management Mode Core Interface
and defines EFI_MM_COMMUNICATION_PROTOCOL. This protocol provides a
means of communicating between drivers outside of MM and MMI
handlers inside of MM.
This patch implements the EFI_MM_COMMUNICATION_PROTOCOL DXE runtime
driver for AARCH64 platforms. It uses SMCs allocated from the standard
SMC range defined in DEN0060A_ARM_MM_Interface_Specification.pdf
to communicate with the standalone MM environment in the secure world.
This patch also adds the MM Communication driver (.inf) file to
define entry point for this driver and other compile
related information the driver needs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This patch defines PCDs to describe the base address and size of
communication buffer between normal world (uefi) and standalone MM
environment in the secure world.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
We no longer use per-instance GUIDs to identify NOR flash banks so
there is no longer a need to define them. Drop the Guid member from
the NOR_FLASH_DESCRIPTION type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Thomas Abraham <thomas.abraham@arm.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1356
Current PcdVpdBaseAddress is 32bit static Pcd. NON SPI platform needs to
configure it as Dynamic PCD. Emulator platform (such as NT32) may set its
value to 64bit address.
To meet with this usage, 64bit DynamicEx PcdVpdBaseAddress64 is introduced.
If its value is not zero, it will be used.
If its value is zero, static PcdVpdBaseAddress will be used.
When NON SPI platform enables VPD PCD, they need to set PcdVpdBaseAddress64.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
NorFlashQemuLib is one of the last remaining drivers in ArmVirtPkg
that are not based on the device tree received from QEMU.
For ArmVirtQemu, this does not really matter, given that the NOR
flash banks are always the same: the PEI code is linked to execute
in place from flash bank #0, and the fixed varstore PCDs refer to
flash bank #1 directly.
However, ArmVirtQemuKernel can execute at any offset, permitting it
to be used as an intermediary loader when running QEMU with secure
world emulation enabled, in which case NOR flash bank #0 is secure
only and contains the secure world firmware. In this case,
NorFlashQemuLib should not expose the first flash bank at all.
To prevent introducing too much internal knowledge about which flash
bank is accessible under which circumstances, let's switch to using
the DTB to decide which flash banks to expose to the NOR flash driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
DT has a [pseudo-]standardized 'status' property that can be set on
any node, and which signifies that a node should be treated as
absent unless it is set to 'ok' or 'okay'. So take this into account
when iterating over nodes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Currently, each flash bank controlled by ArmPlatformPkg/NorFlashDxe
has its own VendorHw GUID, and instances of NorFlashPlatformLib
describe each bank to the driver, along with the GUID for each.
This works ok for bare metal platforms, but it would be useful for
virtual platforms if we could obtain this information from a
device tree, which would require us to invent GUIDs on the fly,
given that the 'cfi-flash' binding does not include a GUID.
So instead, let's switch to a single GUID for all flash banks,
and update the driver's device path handling to include an index
to identify each bank uniquely.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Thomas Abraham <thomas.abraham@arm.com>
A subsequent patch will change the layout of devicepath nodes
produced by this driver. In preparation, make some tweaks to
the code to use a packed struct for the devicepath and to pass
the device index to NorFlashCreateInstance(). These are cosmetic
changes only, the resulting binaries should be identical.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Thomas Abraham <thomas.abraham@arm.com>
The last remaining users of the BdsLib.h header reside in the
edk2-platforms tree, and so it has been copied there. This
allows us to remove the original from ArmPkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Remove unused module type restriction for NULL instance.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Remove the duplicated IScsiDxe driver from FDF; Add required shell libraries; Update SYSTEM_CONFIGURATION data structure.
Test: Install and boot Windows 10.
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: David Wei <david.wei@intel.com>
Print debug messages if size of the VariableName plus DataSize exceeds
Max(Auth|Voltaile)VariableSize bytes. The messages will be useful if any
platform specific value of Max(Auth|Voltaile)VariableSize PCDs have to
be changed.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Our poor man's implementation of EnterS3WithImmediateWake () currently
sets a high TPL level to disable interrupts, and simply calls the
PEI entrypoint again after disabling the MMU.
Unfortunately, this is not sufficient: DMA capable devices such as
network controllers or USB controllers may still be enabled and
writing to memory, e.g., in response to incoming network packets.
So instead, do the full ExitBootServices() dance: allocate space and
get the memory map, call ExitBootServices(), and in case it fails, get
the memory map again and call ExitBootServices() again. This ensures
that all cleanup related to DMA capable devices is performed before
doing the warm reset.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In function UiDisplayMenu, the NewPos ptr which used to point to the
highlight menu entry. It will always point to the menu entry which
need to be highlighted or the gMenuOption menu if the highlight menu
is not found.
So we can remove the NULL ptr check for NewPos in this function.
And add the ASSERT code to avoid if any false positive reports
of NULL pointer dereference issue raised from static analysis.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BAR | std vga | vmsvga
---------------------------------
0 | Framebuffer | I/O space
1 | Reserved | Framebuffer
2 | MMIO | FIFO
- We cannot recognize VMW SVGA as BOCHS because that would confuse the
IsQxl setting in QemuVideoControllerDriverStart(),
- We cannot recognize VMW SVGA as BOCHS_MMIO because BAR2 on VMW SVGA is
not the BOCHS MMIO BAR (we can only use port IO).
Therefore the list of reasons for which we should introduce
QEMU_VIDEO_VMWARE_SVGA should name three reasons:
(1) Get framebuffer from correct PCI BAR
(2) Prevent using BAR2 for MMIO
(3) Prevent mis-recognizing VMW SVGA as QXL
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
This reverts commit 05a5379458.
The VMWare SVGA display device implemented by Qemu (-vga vmware) uses
an I/O-type BAR which is laid out such that some register offsets are
not aligned to the read/write width with which they are expected to be
accessed. However, we reverted the initialization of VMWare SVGA device,
we don't need such unaligned I/O.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
(cherry picked from commit 438ada5aa5)
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This reverts commit c137d95081.
The VMWare SVGA model now -- since commit 104bd1dc70 in QEMU --
falls back to stdvga (that is, Bochs) if we don't setup VMWare SVGA
FIFO.
To simplify QemuVideoDxe, we don't intend to implement the VMWare SVGA
FIFO setup feature. It means our current VMW SVGA driver code is
basically dead. To simplify the problem, we will replace the old
VMWare SVGA driver to Bochs interface. It should work on all QEMU
version.
The first step for using Bochs interface is to revert old driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
(cherry picked from commit 98856a724c)
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This reverts commit b2959e9f1a.
The VMWare SVGA display device implemented by Qemu (-vga vmware) uses
an I/O-type BAR which is laid out such that some register offsets are
not aligned to the read/write width with which they are expected to be
accessed. However, we will revert the initialization of VMWare SVGA
device later, we don't need such unaligned I/O.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
(cherry picked from commit e038bde267)
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Some SdMmc host controllers are run by clocks with different
frequency than it is reflected in Capabilities Register 1.
It is allowed by SDHCI specification ver. 4.2 - if BaseClkFreq
field value of the Capability Register 1 is zero, the clock
frequency must be obtained via another method.
Because the bitfield is only 8 bits wide, a maximum value
that could be obtained from hardware is 255MHz.
In case the actual frequency exceeds 255MHz, the 8-bit BaseClkFreq
member of SD_MMC_HC_SLOT_CAP structure occurs to be not sufficient
to be used for setting the clock speed in SdMmcHcClockSupply
function.
This patch adds new UINT32 array ('BaseClkFreq[]') to
SD_MMC_HC_PRIVATE_DATA structure for specifying
the input clock speed for each slot of the host controller.
All routines that are used for clock configuration are
updated accordingly.
This patch also adds new IN OUT BaseClockFreq field
in the Capability callback of the SdMmcOverride,
protocol which allows to update BaseClkFreq value.
The patch reuses original commit from edk2-platforms:
20f6f144d3a8 ("Marvell/Drivers: XenonDxe: Allow overriding base clock
frequency")
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Some SD Host Controlers need to do additional operations after clock
frequency switch.
This patch add new callback type to NotifyPhase of the SdMmcOverride
protocol. It is called after SdMmcHcClockSupply.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Some SD Host Controllers use different values in Host Control 2 Register
to select UHS Mode. This patch adds a new UhsSignaling type routine to
the NotifyPhase of the SdMmcOverride protocol.
UHS signaling configuration is moved to a common, default routine
(SdMmcHcUhsSignaling). After it is executed, the protocol producer
can override the values if needed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
In order to ensure bigger flexibility in the NotifyPhase
routine of the SdMmcOverride protocol, enable using an
optional phase-specific data. This will allow to exchange
more information between the protocol producer driver
and SdMmcPciHcDxe in the newly added callbacks.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1300
Provides PCD selection for FSP Wrapper to support Dispatch
mode. Also PcdFspmBaseAddress should support Dynamic for
recovery scenario (multiple FSP-M binary in flash)
Test: Verified on internal platform and both API and
DISPATCH modes booted successfully.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Desimone Nathaniel L <nathaniel.l.desimone@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
When setting up the stack in the startup code and jumping into C code
for the first time, ensure that the frame pointer register is cleared
so that backtraces terminate correctly. Otherwise, output like the
below is shown when encountering an exception on a DEBUG build:
Synchronous Exception at 0x0000000078A14780
PC 0x000078A14780 (0x000078A00000+0x00014780) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A10634 (0x000078A00000+0x00010634) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A11CF0 (0x000078A00000+0x00011CF0) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A11DD0 (0x000078A00000+0x00011DD0) [ 0] ArmVeNorFlashDxe.dll
PC 0x00007BC9D87C (0x00007BC98000+0x0000587C) [ 1] PartitionDxe.dll
PC 0x00007BC99B3C (0x00007BC98000+0x00001B3C) [ 1] PartitionDxe.dll
PC 0x00007F362F50 (0x00007F359000+0x00009F50) [ 2] DxeCore.dll
PC 0x00007BD63BB0 (0x00007BD5B000+0x00008BB0) [ 3] BdsDxe.dll
PC 0x00007BD6EE00 (0x00007BD5B000+0x00013E00) [ 3] BdsDxe.dll
PC 0x00007BD67C70 (0x00007BD5B000+0x0000CC70) [ 3] BdsDxe.dll
PC 0x00007F3724F0 (0x00007F359000+0x000194F0) [ 4] DxeCore.dll
PC 0x00004008FC30
PC 0x000040090130
PC 0x5800F6025800F5E1
Recursive exception occurred while dumping the CPU state
which is rather unhelpful, given that this prevent the remaining debug
output from being printed (register dump, stack dump, fault related
system registers etc)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
When setting up the stack in the startup code and jumping into C code
for the first time, ensure that the frame pointer register is cleared
so that backtraces terminate correctly. Otherwise, output like the
below is shown when encountering an exception on a DEBUG build:
Synchronous Exception at 0x0000000078A14780
PC 0x000078A14780 (0x000078A00000+0x00014780) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A10634 (0x000078A00000+0x00010634) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A11CF0 (0x000078A00000+0x00011CF0) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A11DD0 (0x000078A00000+0x00011DD0) [ 0] ArmVeNorFlashDxe.dll
PC 0x00007BC9D87C (0x00007BC98000+0x0000587C) [ 1] PartitionDxe.dll
PC 0x00007BC99B3C (0x00007BC98000+0x00001B3C) [ 1] PartitionDxe.dll
PC 0x00007F362F50 (0x00007F359000+0x00009F50) [ 2] DxeCore.dll
PC 0x00007BD63BB0 (0x00007BD5B000+0x00008BB0) [ 3] BdsDxe.dll
PC 0x00007BD6EE00 (0x00007BD5B000+0x00013E00) [ 3] BdsDxe.dll
PC 0x00007BD67C70 (0x00007BD5B000+0x0000CC70) [ 3] BdsDxe.dll
PC 0x00007F3724F0 (0x00007F359000+0x000194F0) [ 4] DxeCore.dll
PC 0x00004008FC30
PC 0x000040090130
PC 0x5800F6025800F5E1
Recursive exception occurred while dumping the CPU state
which is rather unhelpful, given that this prevent the remaining debug
output from being printed (register dump, stack dump, fault related
system registers etc)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
SdReadWrite can be called with a NULL Token for synchronous operations.
Add guard for DEBUG print to only print event pointer with Token is not
NULL.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Fix a typo in the 32-bit ARM version of the GICv3 driver, which uses
the wrong system register encoding to access ICC_IAR1, and attempted
to access ICC_IAR0 instead. This results in boot time hangs both
under QEMU emulation and on real hardware.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
BaseIoLibIntrinsicArmVirt was created to prevent LTO from merging
accesses to MMIO regions, resulting in instructions with multiple
output registers that KVM on ARM cannot emulate (since the exception
syndrome information that KVM relies on can only describe a single
output register)
However, using double word loads on ARM amounts to the same thing,
and so code that relies on doing 64-bit MMIO to regions that are
emulated under KVM (such as the GICv3 TYPER register) will still
suffer from the original issue.
So replace ldrd and strd with equivalent two instruction sequences.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1305
The patch reverts commit 1ed6498c4a
* UefiCpuPkg/CommonFeature: Skip locking when the feature is disabled
FEATURE_CONTROL.Lock bit is controlled by feature
CPU_FEATURE_LOCK_FEATURE_CONTROL_REGISTER. The commit 1ed649 fixes
a bug that when the feature is disabled, the Lock bit is cleared.
But it's a security hole if the bit is cleared when booting OS.
We can argue that platform needs to make sure the value
of PcdCpuFeaturesUserConfiguration should be set properly to make
sure feature CPU_FEATURE_LOCK_FEATURE_CONTROL_REGISTER is enabled.
But it's better to guarantee this in the generic core code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1142
The fix is similar to commit ebb6c7633b.
We found that a similar fix should be applied to the NVMe PEI driver as
well. Hence, this one is for the PEI counterpart driver.
According to the the NVM Express spec Revision 1.1, for some commands
(like Get/Set Feature Command, Figure 89 & 90 of the spec), the Memory
Buffer maybe optional although the command opcode indicates there is a
data transfer between host & controller (Get/Set Feature Command, Figure
38 of the spec).
Hence, this commit refine the checks for the 'TransferLength' and
'TransferBuffer' field of the
EDKII_PEI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET structure to address this
issue.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
This reverts commit 8cd4e734cc.
It is not a real bug fix. It should not be pushed after
Hard Feature Freeze for edk2-stable201811 tag.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Bi Dandan <dandan.bi@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1312
Text format for AcpiEx device path in UEFI Spec:
AcpiEx(HID,CID,UID,HIDSTR,CIDSTR,UIDSTR)
AcpiEx(HID|HIDSTR,(CID|CIDSTR,UID|UIDSTR))(Display Only)
When convert device path to text for AcpiEx device path,
current code check AllowShortcuts parameter to convert
the device path to DisplayOnly text format(shorter text
representation) by mistake.
It should check DisplayOnly parameter.
This commit is to fix this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In current implementation, core and package level sync uses same semaphores.
Sharing the semaphore may cause wrong execution order.
For example:
1. Feature A has CPU_FEATURE_CORE_BEFORE dependency with Feature B.
2. Feature C has CPU_FEATURE_PACKAGE_AFTER dependency with Feature B.
The expected feature initialization order is A B C:
A ---- (Core Depends) ----> B ---- (Package Depends) ----> C
For a CPU has 1 package, 2 cores and 4 threads. The feature initialization
order may like below:
Thread#1 Thread#2 Thread#3 Thread#4
[A.Init] [A.Init] [A.Init]
Release(S1, S2) Release(S1, S2) Release(S3, S4)
Wait(S1) * 2 Wait(S2) * 2 <------------------------------- Core sync
[B.Init] [B.Init]
Release (S1,S2,S3,S4)
Wait (S1) * 4 <----------------------------------------------------- Package sync
Wait(S4 * 2) <- Core sync
[B.Init]
In above case, for thread#4, when it syncs in core level, Wait(S4) * 2 isn't
blocked and [B.Init] runs. But [A.Init] hasn't run in thread#3. It's wrong!
Thread#4 should execute [B.Init] after thread#3 executes [A.Init] because B
core level depends on A.
The reason of the wrong execution order is that S4 is released in thread#1
by calling Release (S1, S2, S3, S4) and in thread #4 by calling
Release (S3, S4).
To fix this issue, core level sync and package level sync should use separate
semaphores.
In above example, the S4 released in Release (S1, S2, S3, S4) should not be the
same semaphore as that in Release (S3, S4).
Related BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1311
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
In current implementation, core and package level sync uses same semaphores.
Sharing the semaphore may cause wrong execution order.
For example:
1. Feature A has CPU_FEATURE_CORE_BEFORE dependency with Feature B.
2. Feature C has CPU_FEATURE_PACKAGE_AFTER dependency with Feature B.
The expected feature initialization order is A B C:
A ---- (Core Depends) ----> B ---- (Package Depends) ----> C
For a CPU has 1 package, 2 cores and 4 threads. The feature initialization
order may like below:
Thread#1 Thread#2 Thread#3 Thread#4
[A.Init] [A.Init] [A.Init]
Release(S1, S2) Release(S1, S2) Release(S3, S4)
Wait(S1) * 2 Wait(S2) * 2 <------------------------------- Core sync
[B.Init] [B.Init]
Release (S1,S2,S3,S4)
Wait (S1) * 4 <----------------------------------------------------- Package sync
Wait(S4 * 2) <- Core sync
[B.Init]
In above case, for thread#4, when it syncs in core level, Wait(S4) * 2 isn't
blocked and [B.Init] runs. But [A.Init] hasn't run in thread#3. It's wrong!
Thread#4 should execute [B.Init] after thread#3 executes [A.Init] because B
core level depends on A.
The reason of the wrong execution order is that S4 is released in thread#1
by calling Release (S1, S2, S3, S4) and in thread #4 by calling
Release (S3, S4).
To fix this issue, core level sync and package level sync should use separate
semaphores.
In above example, the S4 released in Release (S1, S2, S3, S4) should not be the
same semaphore as that in Release (S3, S4).
Related BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1311
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
V2 changes:
V1 change has regression which caused by change feature order.
V2 changes logic to detect dependence not only for the
neighborhood features. It need to check all features in the list.
V1 Changes:
In current code logic, only adjust feature position if current
CPU feature position not follow the request order. Just like
Feature A need to be executed before feature B, but current
feature A registers after feature B. So code will adjust the
position for feature A, move it to just before feature B. If
the position already met the requirement, code will not adjust
the position.
This logic has issue when met all below cases:
1. feature A has core or package level dependence with feature B.
2. feature A is register before feature B.
3. Also exist other features exist between feature A and B.
Root cause is driver ignores the dependence for this case, so
threads may execute not follow the dependence order.
Fix this issue by change code logic to adjust feature position
for CPU features which has dependence relationship.
Related BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1311
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
In function UiDisplayMenu, the NewPos ptr which used to point to the
highlight menu entry. It will always point to the menu entry which
need to be highlighted or the gMenuOption menu if the highlight menu
is not found.
So we can remove the NULL ptr check for NewPos in this function.
And add the ASSERT code to avoid if any false positive reports
of NULL pointer dereference issue raised from static analysis.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1303
Today's code generates assembly code as below for
InternalSyncIncrement:
__asm__ __volatile__ (
"movl $1, %%eax \n\t"
"lock \n\t"
"xadd %%eax, %1 \n\t"
"inc %%eax \n\t"
: "=a" (Result), // %0
"+m" (*Value) // %1
: // no inputs that aren't also outputs
: "memory",
"cc"
);
0: 55 pushl %ebp
1: 89 e5 movl %esp, %ebp
3: 8b 45 08 movl 8(%ebp), %eax
6: b8 01 00 00 00 movl $1, %eax
b: f0 lock
c: 0f c1 00 xaddl %eax, _InternalSyncIncrement(%eax)
f: 40 incl %eax
10: 5d popl %ebp
11: c3 retl
Line #3 and Line #6 both use EAX as destination register.
Line #c uses EAX and (EAX).
The output operand "=a" tells GCC that EAX is used for output.
But GCC only assumes that EAX will be used in the very last
instruction.
Per GCC document,
"Use the '&' constraint modifier on all output operands that must
not overlap an input. Otherwise, GCC may allocate the output
operand in the same register as an unrelated input operand, on
the assumption that the assembler code consumes its inputs before
producing outputs. This assumption may be false if the assembler
code actually consists of more than one instruction."
"=&a" should be used to tell GCC not use EAX before the assembly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: 8a94eb9283
Fixes: 17634d026f
When static paging is disabled, page table for below 4GB is created
and page table for above 4GB is created dynamically in page fault
handler.
Today's implementation only allow SMM access-out to below types of
memory address no matter static paging is enabled or not:
1. Reserved, run time and ACPI NVS type
2. MMIO
But certain platform feature like RAS may need to access other types
of memory from SMM. Today's code blocks these platforms.
This patch simplifies the policy to only block when static paging
is used so that the static paging can be disabled in these platforms
to meet their SMM access-out need.
Setting PcdCpuSmmStaticPageTable to FALSE can disable the static
paging.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Setting GICD_IROUTERn.IRM and GICD_IROUTERn.{Aff3,Aff2,Aff1,Aff0}
at the same time is nonsensical (see 8.9.13 in the GICv3 spec, which
says of GICD_IROUTERn.IRM that "When this bit is set to 1,
GICD_IROUTER<n>.{Aff3,Aff2,Aff1,Aff0} are UNKNOWN"). There is also no
guarantee that IRM is implemented (see GICD_TYPER.No1N which indicates
whether the implementation supports this or not).
Let's thus not set this bit, as we want all SPIs to be delivered to the
same CPU, and not be broadcast to all of them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <ming.huang@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1295
This issue originates from following patch which allows to enable
paging if PcdImageProtectionPolicy and PcdDxeNxMemoryProtectionPolicy
(in addition to PcdSetNxForStack) are set to enable related features.
5267926134
Due to above change, PcdImageProtectionPolicy will be set to 0 by
default in many platforms, which, in turn, cause following code in
MdeModulePkg\Core\Dxe\Misc\MemoryProtection.c fail the creation of
notify event of CpuArchProtocol.
1138: if (mImageProtectionPolicy != 0 ||
PcdGet64 (PcdDxeNxMemoryProtectionPolicy) != 0) {
1139: Status = CoreCreateEvent (
...
1142: MemoryProtectionCpuArchProtocolNotify,
...
1145: );
Then following call flow won't be done and Guard pages will not be
set as not-present in SetAllGuardPages() eventually.
MemoryProtectionCpuArchProtocolNotify()
=> HeapGuardCpuArchProtocolNotify()
=> SetAllGuardPages()
The solution is removing the if(...) statement so that the notify
event will always be created and registered. This won't cause
unnecessary code execution because, in the notify event handler,
the related PCDs like
PcdImageProtectionPolicy and
PcdDxeNxMemoryProtectionPolicy
will be checked again before doing related jobs.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
At the end of of MemoryProtectionCpuArchProtocolNotify there's cleanup
code to free resource. But at line 978, 994, 1005 the function returns
directly. This patch use "goto" to replace "return" to make sure the
resource is freed before exit.
1029: CoreCloseEvent (Event);
1030: return;
There's another memory leak after calling gBS->LocateHandleBuffer() in
the same function:
Status = gBS->LocateHandleBuffer (
ByProtocol,
&gEfiLoadedImageProtocolGuid,
NULL,
&NoHandles,
&HandleBuffer
);
HandleBuffer is allocated in above call but never freed. This patch
will also add code to free it.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1305
Today's code unconditionally sets the IA32_FEATURE_CONTROL.Lock to 1
no matter the feature is enabled or not.
The patch fixes this issue by only setting the Lock bit to 1 when
the feature is enabled.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
This reverts commit 05a5379458.
The VMWare SVGA display device implemented by Qemu (-vga vmware) uses
an I/O-type BAR which is laid out such that some register offsets are
not aligned to the read/write width with which they are expected to be
accessed. However, we reverted the initialization of VMWare SVGA device,
we don't need such unaligned I/O.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
This reverts commit c137d95081.
The VMWare SVGA model now -- since commit 104bd1dc70 in QEMU --
falls back to stdvga (that is, Bochs) if we don't setup VMWare SVGA
FIFO.
To simplify QemuVideoDxe, we don't intend to implement the VMWare SVGA
FIFO setup feature. It means our current VMW SVGA driver code is
basically dead. To simplify the problem, we will replace the old
VMWare SVGA driver to Bochs interface. It should work on all QEMU
version.
The first step for using Bochs interface is to revert old driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
This reverts commit b2959e9f1a.
The VMWare SVGA display device implemented by Qemu (-vga vmware) uses
an I/O-type BAR which is laid out such that some register offsets are
not aligned to the read/write width with which they are expected to be
accessed. However, we will revert the initialization of VMWare SVGA
device later, we don't need such unaligned I/O.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
[-c <retry count>] is to define the number of times to transmit request
packets and wait for a response. The default value is 6. But it doesn't
specify the behavior of zero value. Here, The patch is to clear that:
Set to zero also means to use the default value.
Cc: Carsey Jaben <jaben.carsey@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
This patch is to fix the invalid setting of MTFTP local port. The
issue can be reproduced by tftp shell command by using [-l port]
option.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
V2:
Add missed library instance for NetworkPkg iSCSI driver.
This patch replaces the MdeModulePkg TCP, PXE and iSCSI driver with those
ones in NetworkPkg. These 3 drivers in MdeModulePkg are not being actively
maintained and will be removed from edk2 master soon.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
V2:
Add missed library instance for NetworkPkg iSCSI driver.
This patch replaces the MdeModulePkg TCP, PXE and iSCSI driver with those
ones in NetworkPkg. These 3 drivers in MdeModulePkg are not being actively
maintained and will be removed from edk2 master soon.
Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>
This patch replaces the MdeModulePkg TCP, PXE and iSCSI driver with those
ones in NetworkPkg. These 3 drivers in MdeModulePkg are not being actively
maintained and will be removed from edk2 master soon.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This patch replaces the MdeModulePkg TCP, PXE and iSCSI driver with those
ones in NetworkPkg. These 3 drivers in MdeModulePkg are not being actively
maintained and will be removed from edk2 master soon.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
V3:
Update the patch to avoid "reduce" function fail.
V2:
Support to extract the common cc flag from a
combined cc flag string. For example
MSFT:*_*_IA32_CC_FLAGS = /D DISABLE_NEW_DEPRECATED_INTERFACES /DDEF_IA32
MSFT:*_*_X64_CC_FLAGS = /DDEF_X64 /D DISABLE_NEW_DEPRECATED_INTERFACES
V1:
Use common cc flags for building PcdValueInit. The common
cc flags include the cc flag which is under common arch and
under all build arches.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Update aslc rule to rename the temp output file from .efi to .pecoff.
This change can avoid the conflict .efi file name in output directory.
One is the driver image, another is aslc temp output file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Provide fully-qualified path to shell scripts
Section 3.6.2 of version 2.2 of the shell specification requires that
the first positional argument (i.e. arg 0) of a shell script resolves
to "the full path name of the script itself."
Ensure that the startup script and any scripts launched by the shell
meet this requirement.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Add a function to return a clean, fully-qualified version of some path.
This function handles a (possibly "dirty") input path that may or may
not include a file system reference.
If it does not include a file system reference, then if the input path
does not begin with a forward or backward slash, then the input path is
relative to the current working directory of the current file system.
Otherwise, it is an absolute path within the current file system.
If it does include a file system reference, it may be a reference to the
current or some other file system. If the file system reference is not
immediately followed by a forward or backward slash, then the input path
is relative to the current working directory of the given file system.
Otherwise, it is an absolute path within the given file system.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In some special cases, after BSP sends Init-sipi-sipi signal
AP needs more time to start the Ap procedure. In this case
BSP may think AP has finished its task but in fact AP hasn't began
yet.
Rollback former change to keep the status which only be used
when AP really finished task.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
According to PCD_DATABASE_INIT in
edk2\MdeModulePkg\Include\Guid\PcdDataBaseSignatureGuid.h,
the max size for string PCD should not exceed USHRT_MAX 65535(0xffff).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Replace the current NULL pointer dereference to retrieve Field's
offset with a call to OFFSET_OF(). This is implemented via
__builtin_offsetof for GCC and Clang, which eliminates UB caught by
Clang UndefinedBehaviorSanitizer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
GCC link script is used to discard the unused section data from ELF image.
ASLDLINK_FLAGS requires it to remove the unnecessary section data, then
GenFw can be used to retrieve the correct data section from ELF image.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
This patch is going to add a check that only if the
attribute of a EFI variable include 'NV', it will be
added into PcdNvStoreDefaultValueBuffer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The recent changes in these three source files introduce the trailing space.
This patch removes them to follow edk2 coding style.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Today's PiSmmIpl implementation initially sets SMRAM to WB to speed
up the SMM core/modules loading before SMM CPU driver runs.
When SMM CPU driver runs, PiSmmIpl resets the SMRAM to UC. It's done
in SmmIplDxeDispatchEventNotify(). COMM_BUFFER_SMM_DISPATCH_RESTART
is returned from SMM core that SMM CPU driver is just dispatched.
Since now the SMRR is widely used to control the SMRAM cache setting.
It's not needed to reset the SMRAM to UC anymore.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1275
The LookupFreeMemRegion() in RuntimeMemAllocate.c is used to look-up
free memory region for runtime resource allocation, which was designed
to support runtime authenticated variable service.
The ReqPages in this function is the required pages to be allocated,
which depends on the malloc() call in internal OpenSSL routines. The
direct offset subtractions on ReqPages may bring possible integer
overflow issue.
This patch is to add the extra parameter checks to remove this possible
overflow risk.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Long Qin <qin.long@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Build UefiCpuPkg with below configuration:
Architecture(s) = IA32
Build target = NOOPT
Toolchain = VS2015x86
Below error info shows up:
DxeRegisterCpuFeaturesLib.lib(CpuFeaturesInitialize.obj) :
error LNK2001: unresolved external symbol __allmul
Valid mDependTypeStr type only have 5 items, use UINT32 type cast
to fix this error.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1279
For function ResolveSymlink(), the below codes:
if (CompareMem ((VOID *)&PreviousFile, (VOID *)Parent,
sizeof (UDF_FILE_INFO)) != 0) {
CleanupFileInformation (&PreviousFile);
}
CopyMem ((VOID *)&PreviousFile, (VOID *)File, sizeof (UDF_FILE_INFO));
If the contents in 'PreviousFile' and 'File' are the same, call to
"CleanupFileInformation (&PreviousFile);" will free the buffers in 'File'
as well. This will lead to potential memory double free/use after free
issues.
This commit will add additional check to address the above issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1279
The content within 'File' is the output data for ResolveSymlink(). This
commit will add checks to ensure the content in 'File' is valid.
Otherwise, possible null pointer dereference issue will occur during the
subsequent usage of the data returned by ResolveSymlink().
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Index is initialized to MAX_UINT16 as default failure value, which
is what the ASSERT is supposed to test for. The ASSERT condition
however can never return FALSE for INT16 != int, as due to
Integer Promotion[1], Index is converted to int, which can never
result in -1.
Furthermore, Index is used as a for loop index variable inbetween its
initialization and the ASSERT, so the value is unconditionally
overwritten too.
Fix the ASSERT check to compare Index to its upper boundary, which it
will be equal to if the loop was not broken out of on success.
[1] ISO/IEC 9899:2011, 6.5.9.4
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Index is initialized to MAX_UINT16 as default failure value, which
is what the ASSERT is supposed to test for. The ASSERT condition
however can never return FALSE for INT16 != int, as due to
Integer Promotion[1], Index is converted to int, which can never
result in -1.
Furthermore, Index is used as a for loop index variable inbetween its
initialization and the ASSERT, so the value is unconditionally
overwritten too.
Fix the ASSERT check to compare Index to its upper boundary, which it
will be equal to if the loop was not broken out of on success.
[1] ISO/IEC 9899:2011, 6.5.9.4
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1286
This issue is introduced by bb685071c2.
The *MemorySpaceMap assigned with NULL (line 1710) value might be
accessed (line 1726/1730) without any sanity check. Although it won't
happen in practice because of line 1722, we still need to add check
against NULL to make static code analyzer happy.
1710 *MemorySpaceMap = NULL;
.... ...
1722 if (DescriptorCount == *NumberOfDescriptors) {
.... ...
1726 Descriptor = *MemorySpaceMap;
.... ...
1730 BuildMemoryDescriptor (Descriptor, Entry);
Tests:
Pass build and boot to shell.
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
When (Len < Offset) is TRUE, indicating the data to visit is beyond
the boundary, the error message is printed but the function doesn't
return NULL.
It's a typo when modifying the commit 4c034bf62.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Today's implementation doesn't check whether the length of
descriptor is valid before using it.
The patch fixes this issue by syncing the similar fix to UsbBusDxe.
70c3c2370a
*MdeModulePkg/UsbBus: Reject descriptor whose length is bad
Additionally the patch also rejects the data when length is
larger than sizeof (PeiUsbDevice->ConfigurationData).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Today's implementation reads the Type/Length field in the USB
descriptors data without checking whether the offset to read is
beyond the data boundary.
The patch fixes this issue by syncing the fix in commit
4c034bf62c
*MdeModulePkg/UsbBus: Fix out-of-bound read access to descriptors
ParsedBytes in UsbBusPei.GetExpectedDescriptor() is different from
Consumed in UsbBusDxe.UsbCreateDesc().
ParsedBytes is the offset of found descriptor while Consumed is
offset of next descriptor of found one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
The block returned from Mtftp6RemoveBlockNum is not the total received and
saved block number if it works in passive (Slave) mode.
The issue was exposed by the EMS test.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The block returned from Mtftp4RemoveBlockNum is not the total received and
saved block number if it works in passive (Slave) mode.
The issue was exposed by the EMS test.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1274
In current code, EhcMonitorAsyncRequests (timer handler) will do
unmap and map operations for AsyncIntTransfers to "Flush data from
PCI controller specific address to mapped system memory address".
EhcMonitorAsyncRequests
EhcFlushAsyncIntMap
PciIo->Unmap
IoMmu->SetAttribute
PciIo->Map
IoMmu->SetAttribute
This may impact the boot performance.
Since the data buffer for EhcMonitorAsyncRequests is internal
buffer, we can allocate common buffer by PciIo->AllocateBuffer
and map the buffer with EfiPciIoOperationBusMasterCommonBuffer,
then the unmap and map operations can be removed.
///
/// Provides both read and write access to system memory by
/// both the processor and a bus master. The buffer is coherent
/// from both the processor's and the bus master's point of view.
///
EfiPciIoOperationBusMasterCommonBuffer,
Test done:
USB KB works normally.
USB disk read/write works normally.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
V3:
Call XhcFreeUrb after XhcCreateTransferTrb fails in XhcCreateTrb.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1274
In current code, XhcMonitorAsyncRequests (timer handler) will do
unmap and map operations for AsyncIntTransfers to "Flush data from
PCI controller specific address to mapped system memory address".
XhcMonitorAsyncRequests
XhcFlushAsyncIntMap
PciIo->Unmap
IoMmu->SetAttribute
PciIo->Map
IoMmu->SetAttribute
This may impact the boot performance.
Since the data buffer for XhcMonitorAsyncRequests is internal
buffer, we can allocate common buffer by PciIo->AllocateBuffer
and map the buffer with EfiPciIoOperationBusMasterCommonBuffer,
then the unmap and map operations can be removed.
///
/// Provides both read and write access to system memory by
/// both the processor and a bus master. The buffer is coherent
/// from both the processor's and the bus master's point of view.
///
EfiPciIoOperationBusMasterCommonBuffer,
Test done:
USB KB works normally.
USB disk read/write works normally.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
V3:
Match function parameter name and description between
XhciSched.c and XhciSched.h.
V2:
Add the missing "FreePool (Data);".
Remove the unnecessary indentation change.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1274
Extract new XhciInsertAsyncIntTransfer function from
XhcAsyncInterruptTransfer.
It is code preparation for following patch,
no essential functional change.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
This reverts commit 51d17bb7b0.
commit 51d17bb7b0 adds new check
of Pcds in the platform unused library INF files.
It breaks the existing platform.
To avoid the impact, roll back this change first.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob C Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1235
When update contents in HiiDatabase, like:
1. Add/update/remove package list
2. Add/update string
3. Add/update image
We should make these operations atomic to prevent the
potential issue that the one update operation with
higher TPL may interrupt another.
This commit is to make the HiiDatabase update behaviors
atomic by adding EfiAcquireLock/EfiReleaseLock function.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1235
Function "HiiGetConfigurationSetting" may be called
when HiiDatabase contents have been updated.
And it is just to call function "HiiGetDatabaseInfo" to
get the contents in HiiDatabase and call function
"HiiGetConfigRespInfo" and get the configuration response
string form HII drivers.
So here we can remove function "HiiGetConfigurationSetting"
and make caller to call "HiiGetDatabaseInfo" and
"HiiGetConfigRespInfo" directly.
And thus it also can distinguish which code blocks are to
operate HiiDatabase contents and which code blocks are not.
Then it's easy to know which code blocks should be atomic
when updating HiiDatabase contents.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Roll back code modify by commit 9e47e6f908,
if ForceRebase not False or True, the GenFv command not need add parameter
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Current code assume only one dependence (before or after) for one
feature. Enhance code logic to support feature has two dependence
(before and after) type.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Code initialized in function can't be correctly detected by build tool.
Add code to clearly initialize the local variable before use it.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Changes include:
1. Remove extra white space at the end of line.
2. Add comments for the new add function parameter.
3. Update IN OUT tag for function parameter.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Code initialized in function can't be correctly detected by build tool.
Add code to clearly initialize the local variable before use it.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Freed-memory guard is used to detect UAF (Use-After-Free) memory issue
which is illegal access to memory which has been freed. The principle
behind is similar to pool guard feature, that is we'll turn all pool
memory allocation to page allocation and mark them to be not-present
once they are freed.
This also implies that, once a page is allocated and freed, it cannot
be re-allocated. This will bring another issue, which is that there's
risk that memory space will be used out. To address it, the memory
service add logic to put part (at most 64 pages a time) of freed pages
back into page pool, so that the memory service can still have memory
to allocate, when all memory space have been allocated once. This is
called memory promotion. The promoted pages are always from the eldest
pages which haven been freed.
This feature brings another problem is that memory map descriptors will
be increased enormously (200+ -> 2000+). One of change in this patch
is to update MergeMemoryMap() in file PropertiesTable.c to allow merge
freed pages back into the memory map. Now the number can stay at around
510.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This issue is hidden in current code but exposed by introduction
of freed-memory guard feature due to the fact that the feature
will turn all pool allocation to page allocation.
The solution is moving the memory allocation in CoreGetMemorySpaceMap()
to be out of the GCD memory map lock.
CoreDumpGcdMemorySpaceMap()
=> CoreGetMemorySpaceMap()
=> CoreAcquireGcdMemoryLock () *
AllocatePool()
=> InternalAllocatePool()
=> CoreAllocatePool()
=> CoreAllocatePoolI()
=> CoreAllocatePoolPagesI()
=> CoreAllocatePoolPages()
=> FindFreePages()
=> PromoteMemoryResource()
=> CoreAcquireGcdMemoryLock() **
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The freed-memory guard feature will cause a recursive calling
of InitializePageTablePool(). This is due to a fact that
AllocateAlignedPages() is used to allocate page table pool memory.
This function will most likely call gBS->FreePages to free unaligned
pages and then cause another round of page attributes change, like
below (freed pages will be always marked not-present if freed-memory
guard is enabled)
FreePages() <===============|
=> CpuSetMemoryAttributes() |
=> <if out of page table> |
=> InitializePageTablePool() |
=> AllocateAlignedPages() |
=> FreePages() ================|
The solution is add a global variable as a lock in page table pool
allocation function and fail any other requests if it has not been
done.
Since this issue will only happen if free-memory guard is enabled,
it won't affect CpuSetMemoryAttributes() in default build of a BIOS.
If free-memory guard is enabled, it only affect the pages
(failed to mark them as not-present) freed in AllocateAlignedPages().
Since those freed pages haven't been used yet (their addresses not
yet exposed to code outside AllocateAlignedPages), it won't compromise
the freed-memory guard feature.
This change will just fail the CpuSetMemoryAttributes() called from
FreePages() but it won't fail the FreePages(). So the error status
won't be propagated upper layer of code.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Non-stop mode was introduced / explained in commit 8f2613628a
("MdeModulePkg/MdeModulePkg.dec: add new settings for PCDs",
2018-08-30).
The macro HEAP_GUARD_NONSTOP_MODE was added to CpuDxe in commit
dcc026217f ("UefiCpuPkg/CpuDxe: implement non-stop mode for uefi",
2018-08-30).
Another instance of the macro HEAP_GUARD_NONSTOP_MODE was added to
PiSmmCpuDxeSmm -- with BIT1|BIT0 replaced with BIT3|BIT2 -- in commit
09afd9a42a ("UefiCpuPkg/PiSmmCpuDxeSmm: implement non-stop mode for
SMM", 2018-08-30)
Since the freed-memory guard is for UEFI-only. This patch only updates
HEAP_GUARD_NONSTOP_MODE in "UefiCpuPkg/CpuDxe/CpuDxe.h" (add BIT4).
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
UAF (Use-After-Free) memory issue is kind of illegal access to memory
which has been freed. It can be detected by a new freed-memory guard
enforced onto freed memory.
BIT4 of following PCD is used to enable the freed-memory guard feature.
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPropertyMask
Please note this feature is for debug purpose and should not be enabled
in product BIOS, and cannot be enabled with pool/page heap guard at the
same time. It's disabled by default.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This cleanup is meant for avoiding misuse of newly introduced BIT4
(UAF detection) of PCD PcdHeapGuardPropertyMask, because it applies
to all types of physical memory. In another words,
PcdHeapGuardPoolType and PcdHeapGuardPageType don't have effect to
the BIT4 of PcdHeapGuardPropertyMask.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Pyrite 2.0 spec has been published, update the spec link info for this file.
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
The MacroDict parameter goes around in circles through 4 functions without use.
1. GetSectionData calls into GetLeafSection, otherwise doesn?t use MacroDict
2. GetLeafSection calls into GetFileStatement, otherwise doesn?t use MacroDict
3. GetFileStatement calls into GetFilePart, otherwise doesn?t use MacroDict
4. GetFilePart calls into GetSectionData, otherwise doesn?t use MacroDict
Go to 1 and repeat forever.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Change lists and tuples used solely for "in" testing to sets.
These operations are not order dependent.
fixed some line length for PEP8 compliance on some.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
1) remove wildcard imports and use explicit imports
2) refactor to use shared variables from Common/DataType
3) rename to not shadow imports
4) don't assign a variable in a loop (just do final assignment)
5) remove spaces, parens, unused or commented out code, etc.
6) merge unnecessary parent classes into child
7) refactor to share DXE and PEI apriori GUIDs from one place
this includes changes to Build and EOT files
8) for PEP8, dont use __ for custom methods.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob C Feng <bob.c.feng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1265
FSP should not override IDT table when it is initialized
by boot loader. IDT should be re-initialized in FSP only
when it is invalid.
To mitigate temporary memory usage a PCD
PcdFspMaxInterruptSupported created for platform to decide
how many interrupts the FSP IDT table can support.
Test: Verified on internal platform and boots successfully.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Desimone Nathaniel L <nathaniel.l.desimone@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
.nasm source file may include some header files.
header file should be listed in Makefile as .nasm source file
dependency.
But now, BaseTools doesn't find them and list them in Makefile.
This is a missing, because original ASM file supports it.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
original we get the VPD PCD items from the VPDGuid.map file in the FV
output folder. but this logic doesn't work when 1) there only have
single non Default SKU, 2) there have multiple SKU with same value.
Now we change it to get the really VPD Pcd items that already display
in the PCD section of the report.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V2: remove the not used parameter i
Fix the bug for Pcd used in command line not override the Pcd used
in the [component] driver's sub-section.
Case:
DSC file:
[PcdsFixedAtBuild]
TokenSpaceGuid.PcdTest
[Components]
TestPkg/TestDriver.inf {
<PcdsFixedAtBuild>
TokenSpaceGuid.PcdTest|"b"
}
build command with --pcd TokenSpaceGuid.PcdTest="AAAABB"
Then we found the Pcd value in the AutoGen.c file is incorrect,
because of the incorrect logic that use the pcd in the [component]
section to re-override it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1260
For the PassThru() service of NVM Express Pass Through Protocol, the
current implementation (function NvmExpressPassThru()) will only use the
IO Completion/Submission queues created internally by this driver during
the controller initialization process. Any other IO queues created will
not be consumed.
So the value is little to accept external IO Completion/Submission queue
creation request. This commit will refine the behavior of function
NvmExpressPassThru(), it will only accept driver internal IO queue
creation commands and will return "EFI_UNSUPPORTED" for external ones.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1259
According to the the NVM Express spec Revision 1.1, for some commands,
command-related information will be stored in the Dword 0 of the
completion queue entry.
One case is for the Get Features Command (Section 5.9.2 of the spec),
Dword 0 of the completion queue entry may contain feature information.
Hence, this commit will always copy the content of completion queue entry
to the PassThru packet regardless of the execution result of the command.
Cc: Liangcheng Tang <liangcheng.tang@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1142
According to the the NVM Express spec Revision 1.1, for some commands
(like Get/Set Feature Command, Figure 89 & 90 of the spec), the Memory
Buffer maybe optional although the command opcode indicates there is a
data transfer between host & controller (Get/Set Feature Command, Figure
38 of the spec).
Hence, this commit refine the checks for the 'TransferLength' and
'TransferBuffer' field of the EFI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET
structure to address this issue.
Cc: Liangcheng Tang <liangcheng.tang@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1272
To have high confidence in usage for platform, add option (BIT2 of
PcdVTdPolicyPropertyMask) to force no IOMMU access attribute request
recording before DMAR table is installed.
Check PcdVTdPolicyPropertyMask BIT2 before RequestAccessAttribute()
and ProcessRequestedAccessAttribute(), then RequestAccessAttribute(),
ProcessRequestedAccessAttribute() and mAccessRequestXXX variables
could be optimized by compiler when PcdVTdPolicyPropertyMask BIT2 = 1.
Test done:
1: Created case that has IOMMU access attribute request before DMAR
table is installed, ASSERT was triggered after setting
PcdVTdPolicyPropertyMask BIT2 to 1.
2. Confirmed RequestAccessAttribute(), ProcessRequestedAccessAttribute()
and mAccessRequestXXX variables were optimized by compiler after
setting PcdVTdPolicyPropertyMask BIT2 to 1.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
PcdValueInit tool is platform scope.
It should be generated into Platform output directory.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob C Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The current code handle all the structure pcds
even if there is no module or library use them.
This patch is going to filter out the unused structure pcds.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PcdValueInit tool is Arch independent, the Arch specific
build options should be removed from PcdValueInit makefile.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob C Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
For void* type pcd in command line, if its value is string, code should
not convert the void* pcd string in command line to array, otherwise it
will make the pcd value in report not match its real raw value.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
For structure PCD in fdf file and command line,
1. use compiler time assert to check the array index, report error
if array index exceeds the array number.
2. use compiler time assert to check the array size, report error
if the user declared size in header file is smaller than the user
used in fdf file and command line.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1243
AcpiExp text device path: AcpiExp(HID,CID,UIDSTR)
And according to UEFI spec, the CID parameter is optional
and has a default value of 0. But current implementation
miss to check following cases for the AcpiExp.
FromText:when text device is AcpiExp(HID,,UIDSTR)/AcpiExp(HID,0,UIDSTR)
ToText: when the CID is 0 in the node structure
This commit is to do the enhancement.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1243
According to UEFI spec,
for the Messaging Device Path with USB Class SubType, some paras
are optional in the text device path.
Take UsbClass(VID,PID,Class,SubClass,Protocol) for example,
The VID is an integer between 0 and 65535 and is optional. The
default value is 0xFFFF.
The PID is an integer between 0 and 65535 and is optional. The
default value is 0xFFFF.
The Class is an integer between 0 and 255 and is optional. The
default value is 0xFF.
The SubClass is an integer between 0 and 255 and is optional. The
default value is 0xFF.
The Protocol is an integer between 0 and 255 and is optional. The
default value is 0xFF.
So if any the optional para is not specified in the text device,
we should set related para in the node structure to default value.
This commit is to do the enhancement for USB Class device path
when optional para is not specified
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Replace multiple, consecutive "\" characters prior to other processing
involving "\" characters. This fixes an issue where "\\..\\..",
"//..//..", and similar input paths are not cleaned properly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@Intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This is a fix for a double cluster allocation when the disk is full.
The double allocation happens because FatGrowEof calls
FatAllocateCluster without immediately marking the each returned
cluster as allocated. The fix is to move the FatSetFatEntry call
inside the loop.
I've also include some improvements to the sanity checks that I added
while tracking this down. They are optional.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Herbie Robinson <Herbie.Robinson@stratus.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1236
When "dmem" runs without additional arguments, it dumps the memory
content of EFI_SYSTEM_TABLE. But today's implementation dumps 512
bytes. It's not correct because sizeof (EFI_SYSTEM_TABLE) is less
than 512, the 512-read causes page fault exception in a heap-guard
enabled environment.
The patch changes the implementation to only dump
sizeof (EFI_SYSTEM_TABLE) bytes for gST.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jim Dailey <jim_dailey@.com>
Commit e59db6a732
* MdeModulePkg/UsbMass: Merge UsbBoot(Read|Write)Blocks(16)
introduces a bug that causes writing to USB key always fails.
When that patch is verified, only reading was verified.
The root cause is when the writing operation is performed,
the data direction EfiUsbDataIn is wrongly used. Instead, it
should be EfiUsbDataOut.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The tool now can detect the error that the content between double
quotes contains another double quotes or enter key.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Change the criteria of the checkpoint of "#ifndef" to remove the requirement of prefix '_'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1255
For function ReadFile():
If the line
Status = GetAedAdsData (
...
);
is reached multiple times during the 'for' loop, freeing the data pointed
by variable 'Data' may potentially lead to variable 'Ad' referencing the
already-freed data.
After calling function GetAllocationDescriptor(), 'Data' and 'Ad' may
point to the same memory (with some possible offset). Hence, this commit
will move the FreePool() call backwards to ensure the data will no longer
be used.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Acked-by: Star Zeng <star.zeng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1254
This commit will add an additional check within function GetPdFromLongAd()
when getting a Partition Descriptor from given a Long Allocation
Descriptor.
According to UDF 2.60 Spec, Section 2.2.13:
> The partition reference numbers used are determined by the order of the
> Partition Maps in the LVD.
(Also the picture comes before the above contents)
And a more detailed explanation of the partition reference numbers is at
https://sites.google.com/site/udfintro/ (seems not a formal documentation
though), Section 5.3.6.
Based on the above findings, the 'PartitionReferenceNumber' field in a
Long Allocation Descriptor is used as an index to access the Partition
Maps data within a Logical Volume Descriptor.
Hence, the new check focuses on the validity of this
'PartitionReferenceNumber' field in a Long Allocation Descriptor. Since
the current implementation of UdfDxe driver supports only one partition on
a Logical Volume, so the value of 'PartitionReferenceNumber' should be 0.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Acked-by: Star Zeng <star.zeng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1252
Calling the 'SetPosition' service of the EFI_FILE_PROTOCOL with 'Position'
equals to 0xFFFFFFFFFFFFFFFF for a file is to set the current position to
the end of the file. But the current implementation of function
UdfSetPosition() is to set it to the last byte (not EOF).
This commit will resolve this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Acked-by: Star Zeng <star.zeng@intel.com>
Current hard code Usb2Hc.XXXRevision may be not accurate.
This patch updates code to assign Usb2Hc.XXXRevision based on
SBRN (Serial Bus Release Number, PCI configuration space offset
0x60) although there is no code consuming them.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Because of we newly add the PcdFieldValueFromComm and
PcdFieldValueFromFdf in early parser phase, so in the report we use
the saved value in this two variables to print it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1262
Current implementation of BaseLib APIs:
AsciiStrToUnicodeStr()
AsciiStrToUnicodeStrS()
AsciiStrnToUnicodeStrS()
do not handle EASCII properly.
More specifically, if the value of ASCII character is larger than 0x7F,
then the converted Unicode character will have all '1's in the higher 8
bits.
An example:
0xC9 => 0xFFC9 (current implementations)
and it should be:
0xC9 => 0x00C9
This commit will address this issue.
Cc: Bin.Lain <bin_601@mail2000.com.tw>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V2:
Fixed 3 typo.
Use startswith(('L"',"L'")) to check if a string is Unicode string.
Use a set PcdValueTypeSet instead of a list PcdValueTypeList to save
memory.
V1:
For the same one VOID* pcd, if the default value type of one SKU is
"Unicode string", the other SKUs are "OtherVOID*"(ASCII string or
byte array),Then convert "Unicode string" to "byte array".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
V2:
Make the code of patch both compatible for Python2 and Python3.
V1:
If different PCDs refer to the same EFI variable, then do EFI variable
combination, according to the VariableOffset of different PCDS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Because MSR has scope attribute, driver has no needs to set
MSR for all APs if MSR scope is core or package type. This patch
updates code to base on the MSR scope value to add MSR to the register
table.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
V4 changes:
1. Serial console log for different threads when program register table.
2. Check the AcpiCpuData before use it to avoid potential ASSERT.
V3 changes:
1. Use global variable instead of internal function to return string for register type
and dependence type.
2. Add comments for some complicated logic.
V1 changes:
Because this driver needs to set MSRs saved in normal boot phase, sync
semaphore logic from RegisterCpuFeaturesLib code which used for normal boot phase.
Detail see below change for RegisterCpuFeaturesLib:
UefiCpuPkg/RegisterCpuFeaturesLib: Add logic to support semaphore type.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
V4 changes include:
1. Serial debug message for different threads when program the register table.
V3 changes include:
1. Use global variable instead of internal function to return string for register type
and dependence type.
2. Add comments for some complicated logic.
V2 changes include:
1. Add more description for the code part which need easy to understand.
2. Refine some code base on feedback for V1 changes.
V1 changes include:
In a system which has multiple cores, current set register value task costs huge times.
After investigation, current set MSR task costs most of the times. Current logic uses
SpinLock to let set MSR task as an single thread task for all cores. Because MSR has
scope attribute which may cause GP fault if multiple APs set MSR at the same time,
current logic use an easiest solution (use SpinLock) to avoid this issue, but it will
cost huge times.
In order to fix this performance issue, new solution will set MSRs base on their scope
attribute. After this, the SpinLock will not needed. Without SpinLock, new issue raised
which is caused by MSR dependence. For example, MSR A depends on MSR B which means MSR A
must been set after MSR B has been set. Also MSR B is package scope level and MSR A is
thread scope level. If system has multiple threads, Thread 1 needs to set the thread level
MSRs and thread 2 needs to set thread and package level MSRs. Set MSRs task for thread 1
and thread 2 like below:
Thread 1 Thread 2
MSR B N Y
MSR A Y Y
If driver don't control execute MSR order, for thread 1, it will execute MSR A first, but
at this time, MSR B not been executed yet by thread 2. system may trig exception at this
time.
In order to fix the above issue, driver introduces semaphore logic to control the MSR
execute sequence. For the above case, a semaphore will be add between MSR A and B for
all threads. Semaphore has scope info for it. The possible scope value is core or package.
For each thread, when it meets a semaphore during it set registers, it will 1) release
semaphore (+1) for each threads in this core or package(based on the scope info for this
semaphore) 2) acquire semaphore (-1) for all the threads in this core or package(based
on the scope info for this semaphore). With these two steps, driver can control MSR
sequence. Sample code logic like below:
//
// First increase semaphore count by 1 for processors in this package.
//
for (ProcessorIndex = 0; ProcessorIndex < PackageThreadsCount ; ProcessorIndex ++) {
LibReleaseSemaphore ((UINT32 *) &SemaphorePtr[PackageOffset + ProcessorIndex]);
}
//
// Second, check whether the count has reach the check number.
//
for (ProcessorIndex = 0; ProcessorIndex < ValidApCount; ProcessorIndex ++) {
LibWaitForSemaphore (&SemaphorePtr[ApOffset]);
}
Platform Requirement:
1. This change requires register MSR setting base on MSR scope info. If still register MSR
for all threads, exception may raised.
Known limitation:
1. Current CpuFeatures driver supports DXE instance and PEI instance. But semaphore logic
requires Aps execute in async mode which is not supported by PEI driver. So CpuFeature
PEI instance not works after this change. We plan to support async mode for PEI in phase
2 for this task.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
v3 changes:
1. Move CPU_FEATURE_DEPENDENCE_TYPE definition here from RegisterCpuFeaturesLib.h file.
2. Add Invalid type for REGISTER_TYPE which will be used in code.
v2 changes:
1. Add more description about why we do this change.
2. Change structure field type from pointer to EFI_PHYSICAL_ADDRESS because it will
be share between PEI and DXE.
v1 Changes:
In order to support semaphore related logic, add new definition for it.
In a system which has multiple cores, current set register value task costs huge times.
After investigation, current set MSR task costs most of the times. Current logic uses
SpinLock to let set MSR task as an single thread task for all cores. Because MSR has
scope attribute which may cause GP fault if multiple APs set MSR at the same time,
current logic use an easiest solution (use SpinLock) to avoid this issue, but it will
cost huge times.
In order to fix this performance issue, new solution will set MSRs base on their scope
attribute. After this, the SpinLock will not needed. Without SpinLock, new issue raised
which is caused by MSR dependence. For example, MSR A depends on MSR B which means MSR A
must been set after MSR B has been set. Also MSR B is package scope level and MSR A is
thread scope level. If system has multiple threads, Thread 1 needs to set the thread level
MSRs and thread 2 needs to set thread and package level MSRs. Set MSRs task for thread 1
and thread 2 like below:
Thread 1 Thread 2
MSR B N Y
MSR A Y Y
If driver don't control execute MSR order, for thread 1, it will execute MSR A first, but
at this time, MSR B not been executed yet by thread 2. system may trig exception at this
time.
In order to fix the above issue, driver introduces semaphore logic to control the MSR
execute sequence. For the above case, a semaphore will be add between MSR A and B for
all threads. Semaphore has scope info for it. The possible scope value is core or package.
For each thread, when it meets a semaphore during it set registers, it will 1) release
semaphore (+1) for each threads in this core or package(based on the scope info for this
semaphore) 2) acquire semaphore (-1) for all the threads in this core or package(based
on the scope info for this semaphore). With these two steps, driver can control MSR
sequence. Sample code logic like below:
//
// First increase semaphore count by 1 for processors in this package.
//
for (ProcessorIndex = 0; ProcessorIndex < PackageThreadsCount ; ProcessorIndex ++) {
LibReleaseSemaphore ((UINT32 *) &SemaphorePtr[PackageOffset + ProcessorIndex]);
}
//
// Second, check whether the count has reach the check number.
//
for (ProcessorIndex = 0; ProcessorIndex < ValidApCount; ProcessorIndex ++) {
LibWaitForSemaphore (&SemaphorePtr[ApOffset]);
}
Platform Requirement:
1. This change requires register MSR setting base on MSR scope info. If still register MSR
for all threads, exception may raised.
Known limitation:
1. Current CpuFeatures driver supports DXE instance and PEI instance. But semaphore logic
requires Aps execute in async mode which is not supported by PEI driver. So CpuFeature
PEI instance not works after this change. We plan to support async mode for PEI in phase
2 for this task.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1251
*v2: Correct the type of parameters in Ikev2ParseProposalData(), and refined
the corresponding description.
IpSecDxe failed to create the Child SA during parsing SA Payload, the issue
was caused by the below commit:
SHA-1: 1e0db7b119
* MdeModulePkg/NetworkPkg: Checking for NULL pointer before use.
In above commit, it changed the value of IsMatch in Ikev2ChildSaParseSaPayload()
to FALSE. That's correct but it exposed the potential bug in to match the correct
proposal Data, which will cause the issue happen.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The case is:
in the DSC file:
SKUID_IDENTIFIER = ALL
[SkuIds]
0|DEFAULT
1|A
[PcdsFixedAtBuild.common.A]
TokenSpaceGuid.Test401|{0x0F, 0x12}
TokenSpaceGuid.Test401.TEST401INT8ARRAY[0]|'B'
in the build report, Data = OverrideValues[Keys[0]], but the Keys[0]
is the keyword "DEFAULT", and in this case the "DEFAULT" SKU doesn't
save any value, then it cause the Data is empty, in the next code
when we use the code it cause crash.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The case is use Dynamic structure Pcd in the FDF file.
Current code already save the Guid, Name and Filed info for those Pcd,
but it directly use the dict key as [Name, Guid] and cause this crash
issue.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=1264
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
the bug is PcdValueFromComm is not set, but the Pcd have been override
by the command line option.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1266af5e952159 abstracted generic functions
from different modules (IntelVTdDxe, S3SaveStateDxe, PcRtc,
DpDynamicCommand and PiSmmCpuDxeSmm). Some of them (IntelVTdDxe and
PcRtc) checked Table against NULL before accessing Table->Signature,
some (S3SaveStateDxe, DpDynamicCommand and PiSmmCpuDxeSmm did not.
The ScanTableInSDT() in Acpi.c of UefiLib was mainly from
S3SaveStateDxe, so it does not check Table against NULL before
accessing Table->Signature.
This patch updates ScanTableInSDT() to check Table against NULL first
before accessing Table->Signature.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1241
Add support for both API (original mode) and DISPATCH mode:
1. Add FspMode field from reserved byte of Global
Data Structure to tell which mode is selected by boot
loader. If boot loader invoking FSP-M API this field
will remain as default 0 (API mode), otherwise platform
FSP should set this field to 1 (Dispatch mode) when
initializing Global Data Structure.
2. gFspInApiModePpiGuid will be instaled when FSP running in API
mode and modules only for API mode should have this in depex.
3. If it is DISPATCH mode, FSP will return to PEI dispatcher,
not directly return to boot loader.
4. DISPATCH mode supports DXE NotifyPhase drivers so FSP
will not wait for PEI NotifyPhase callbacks, instead it
will install gFspReadyForNotifyPhasePpiGuid PPI for
platform to complete late initialization before transferring
to DXE.
Test: Verified FSP API and DISPATCH modes on 2 internal
platforms and both boot successfully.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Desimone Nathaniel L <nathaniel.l.desimone@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
This change is to pass static analysis.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In the expression for unicode string and general string compare, it
should check whether it startswith "L'" or 'L"', but not "L".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
the case is:
in the DSC:
[PcdsFixedAtBuild.common]
TokenSpaceGuid.TestFixedPcd|0xFFEAA000
[PcdsDynamicExDefault.common.DEFAULT]
!if TokenSpaceGuid.PcdFlag == TRUE
TokenSpaceGuid.PcdTest|TokenSpaceGuid.TestFixedPcd
!endif
Then build with --pcd TokenSpaceGuid.PcdFlag=TRUE, it report failure,
but if we build without this --pcd option, it could build success.
we found when the --pcd is enabled, the fixedatbuild pcds are not be
collected into expression to calculate.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=1256
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1249
We found potential dead codes within File.c during the code coverage test.
After manual review, we think the below ones are positive reports:
A. For function GetAllocationDescriptor():
Due to the all the calling places for this function, the input parameter
'RecordingFlags' can only with value 'LongAdsSequence' or
'ShortAdsSequence'. Moreover, this is also mentioned in the function
description comments for GetAllocationDescriptor().
So the below code will never be reached:
return EFI_DEVICE_ERROR;
This commit will add "ASSERT (FALSE);" before the above line to indicate
this and thus matching the function description comments.
B. For function GetAllocationDescriptorLsn():
Due to the all the calling places for this function, the input parameter
'RecordingFlags' can only with value 'LongAdsSequence' or
'ShortAdsSequence'. Moreover, this is also mentioned in the function
description comments for GetAllocationDescriptorLsn().
So the below code will never be reached:
return EFI_UNSUPPORTED;
This commit will add "ASSERT (FALSE);" before the above line to indicate
this and thus matching the function description comments.
Cc: Paulo Alcantara <palcantara@suse.de>
Cc: Paulo Alcantara <paulo@paulo.ac>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1249
We found potential dead codes within File.c during the code coverage test.
After manual review, we think the below ones are positive reports:
A. In function UdfRead():
else if (IS_FID_DELETED_FILE (Parent->FileIdentifierDesc)) {
Status = EFI_DEVICE_ERROR;
}
A File Identifier Descriptor will be get from the UDF media only by
function ReadDirectoryEntry(). And within this function, all the File
Identifier Descriptor with 'DELETED_FILE' characteristics will be skipped
and will not be returned. Hence, the above codes in function UdfRead()
will never be hit.
This commit will add "ASSERT (FALSE);" before the above line to indicate
this.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1248
This commit will refine the ASSERTs in function GetLongAdLsn() and
GetAllocationDescriptorLsn() when the logical sector number cannot be
returned due to unrecognized media format.
Error handling logic will be used for those ASSERTs.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This commit adds ASSERTs to address false positive reports of NULL
pointer dereference issues raised from static analysis with regard to
function ReadDirectoryEntry().
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Star Zeng <star.zeng@intel.com>
(This patch is identical to the X64 half of the last one, except for the
InternalSyncCompareExchange32() -> InternalSyncCompareExchange64() and
"cmpxchgl" -> "cmpxchgq" replacements.)
The CMPXCHG instruction has the following operands:
- AX (implicit, CompareValue): input and output
- destination operand (*Value): input and output
- source operand (ExchangeValue): input
The X64 version of InternalSyncCompareExchange64() attempts to mark both
CompareValue and (*Value) as input/output, but it doesn't use the
appropriate constraints for either operand.
Fix these issues. Furthermore, prefer the short "+" constraint for I/O
operands over the <output-operand-number> constraint that can be applied
to the input instances of I/O operands.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1208
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(This patch is identical to the last one, except for the
InternalSyncCompareExchange16() -> InternalSyncCompareExchange32() and
"cmpxchgw" -> "cmpxchgl" replacements.)
The CMPXCHG instruction has the following operands:
- AX (implicit, CompareValue): input and output
- destination operand (*Value): input and output
- source operand (ExchangeValue): input
The IA32 version of InternalSyncCompareExchange32() correctly marks
CompareValue as input/output, but it marks (*Value) only as input.
The X64 version of InternalSyncCompareExchange32() attempts to mark both
CompareValue and (*Value) as input/output, but it doesn't use the
appropriate constraints for either operand.
Fix these issues. Furthermore, prefer the short "+" constraint for I/O
operands over the <output-operand-number> constraint that can be applied
to the input instances of I/O operands.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1208
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The CMPXCHG instruction has the following operands:
- AX (implicit, CompareValue): input and output
- destination operand (*Value): input and output
- source operand (ExchangeValue): input
The IA32 version of InternalSyncCompareExchange16() correctly marks
CompareValue as input/output, but it marks (*Value) only as input.
The X64 version of InternalSyncCompareExchange16() attempts to mark both
CompareValue and (*Value) as input/output, but it doesn't use the
appropriate constraints for either operand.
Fix these issues. Furthermore, prefer the short "+" constraint for I/O
operands over the <output-operand-number> constraint that can be applied
to the input instances of I/O operands.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1208
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=415
When SetVariable() to a time based auth variable with APPEND_WRITE
attribute, and if the EFI_VARIABLE_AUTHENTICATION_2.TimeStamp in
the input Data is earlier than current value, it will cause timestamp
zeroing.
This issue may bring time based auth variable downgrade problem.
For example:
A vendor released three certs at 2014, 2015, and 2016, and system
integrated the 2016 cert. User can SetVariable() with 2015 cert and
APPEND_WRITE attribute to cause timestamp zeroing first, then
SetVariable() with 2014 cert to downgrade the cert.
This patch fixes this issue.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Per USB HID spec, the buffer holding key codes should at least 3-byte
long.
Today's code assumes that the key codes buffer length is longer than
3-byte and unconditionally accesses the key codes buffer.
It's incorrect.
The patch fixes the issue by returning Device Error when the
length is less than 3-byte.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Per USB HID spec, the buffer holding key codes should at least 3-byte
long.
Today's code assumes that the key codes buffer length is longer than
3-byte and unconditionally accesses the key codes buffer.
It's incorrect.
The patch fixes the issue by returning Device Error when the
length is less than 3-byte.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Per USB HID spec, the buffer holding key codes should be 8-byte
long.
Today's code assumes that the key codes buffer length is 8-byte
long and unconditionally accesses the key codes buffer.
It's incorrect.
The patch fixes the issue by returning Device Error when the
length is less than 8-byte.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Today's implementation doesn't check whether the length of
descriptor is valid before using it.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Today's implementation reads the Type/Length field in the USB
descriptors data without checking whether the offset to read is
beyond the data boundary.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
UsbBootReadWriteBlocks() and UsbBootReadWriteBlocks16() use a UINT16
local variable to hold the value of
USB_BOOT_MAX_CARRY_SIZE (=0x10000) / BlockSize.
When BlockSize is 1, the UINT16 local variable is set to 0x10000
but the high-16 bits are truncated resulting the final value be 0.
It causes the while-loop in the two functions accesses 0 block in
each loop, resulting the loop never ends.
The patch fixes the two functions to make sure no integer overflow
happens.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The change doesn't have functionality impact.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Update the EOT tool to call the program itself instead of calling the Python API when parsing FV images.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Acked-by: Jaben Carsey <jaben.carsey@intel.com>
Original it hard code to use "VOID*", this patch extend it to both
support VOID* and valid struct name.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Relational and equality operators require both operands to be of
the same type.
Treat the string 'A' and "A" as same type, but for "A" and L"A"
are not same type since one is general string, another is unicode
string.
True:'A'<'B', "A"<"B" 'A'<"B", L'A'<L'B', L"A"<L"B", L'A'<L"B"
Error:'A'<L'B', 'A'<L"B", "A'<L'B'
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
For void* type pcd in command line, if its value is string, then
convert the string value to array format. For example,
build --pcd gUefiOvmfPkgTokenSpaceGuid.PcdTest="c",
convert the pcd value from "c" to "{0x63,0x00}".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V3:
Update the error message for array checker.
V2:
1. Add comments for each ASSERT.
2. ASSERT need to skip the case of array size of array as zero. For
example, TestArray[] in struct in header file.
V1:
For structure PCD,
1. use compiler time assert to check the array index, report error
if array index exceeds the array number.
2. use compiler time assert to check the array size, report error
if the user declared size in header file is smaller than the user
defined in DEC/DSC file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BrotliCustomDecompressLib has the definition with float type. But,
Floating-point types are not supported by EBC compiler.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Bi Dandan <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Set macro for variable arguments, and remove the hard code definition
to avoid the potential duplicated definition.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Dongao Guo <dongao.guo@intel.com>
There are five check not necessary in logic ,just for pass static
analysis. More detail please refer to comment in code.
And the rest changes are all accepted by owner, they are reasonable.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dongao Guo <dongao.guo@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add one new option --uefi to enable UefiCompress.
(re-add this patch since it be reverted in Python3 migration patches,
but this patch is not related with Python3)
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Cover the case:
1.only define the structure Pcd in DEC file, it should not have any
Flag.
2.In the DEC file and DSC file only have the PCD's default value, and
without the field value, it should have *P Flag.
(re-add this patch since it be reverted in Python3 migration patches,
but this patch is not related with Python3)
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
the PyUtility is not used, so we remove it.
(re-add this patch since it be reverted in Python3 migration patches,
but this check is not related with Python3)
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V5:
1. Add ASSERT to indicate this assumption that environment is 32 bit mode.
2. Add description in INF about this driver's expected result
in different environment.
V4:
Only disable paging when it is enabled.
V3 changes:
No need to change inf file.
V2 changes:
Only disable paging in 32 bit mode, no matter it is enable or not.
V1 changes:
PEI Stack Guard needs to enable paging. This might cause #GP if code
trying to write CR3 register with PML4 page table while the processor
is enabled with PAE paging.
Simply disabling paging before updating CR3 can solve this conflict.
It's an regression caused by change: 0a0d5296e4
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1232
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
This reverts commit 6693f359b3c213513c5096a06c6f67244a44dc52..
678f851312.
Python3 migration is the fundamental change. It requires every developer
to install Python3. Before this migration, the well communication and wide
verification must be done. But now, most people is not aware of this change,
and not try it. So, Python3 migration is reverted and be moved to edk2-staging
Python3 branch for the edk2 user evaluation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
For structure Pcd, the type defined in the DEC file is the struct name
while if this Pcd used in the DSC file, it should add VOID* keywords
when it have max size info. so this patch filter the type compare for
this case.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cover the case:
1.only define the structure Pcd in DEC file, it should not have any
Flag.
2.In the DEC file and DSC file only have the PCD's default value, and
without the field value, it should have *P Flag.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. Add Python 3 support on ECC and EOT tools
2. Add C grammar file of ANTLR4 and fix some bugs
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. increment build not skip make file when not change any file
2. report file generate abundant blank line
3. Build encounter Database is locked on some platform, using database
auto commit
4. Fv BaseAddress must have if set
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PEP 238 -- Changing the Division Operator
x/y to return a reasonable approximation of the mathematical result
of the division ("true division")
x//y to return the floor ("floor division")
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Updated Redistributor base calculation to allow for the fact that
GICv4 has 2 additional 64KB frames (for VLPI and a reserved frame).
The code now tests the VLPIS bit in the GIC Redistributor Type
Register (GICR_TYPER) and calculates the Redistributor granularity
accordingly.
The code changes are:
GICR_TYPER register fields, etc, added to the header.
Loop updated to pay attention to GICR_TYPER.Last.
Derive frame "stride" size from GICR_TYPER.VLPIS.
Note: The assumption is that the redistributors are adjacent for
all CPUs. However this may not be the case for NUMA systems.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Clock control is similar in SDHCI versions greater then version 2. Add
support for more recent versions of the controller specification.
SD card support for 1.8V is also present in controller versions 3 and
greater.
https://bugzilla.tianocore.org/show_bug.cgi?id=1233
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Add SDHCI controller defines, this is useful as the version in the
register does not explictly map to a specification version. For example
vesion 4.10 of the specification is version 0x04.
https://bugzilla.tianocore.org/show_bug.cgi?id=1233
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1229
When converting DebugPort device path from text,
current code use VENDOR_DEFINED_MESSAGING_DEVICE_PATH structure
for Debug port device node.
typedef struct {
EFI_DEVICE_PATH_PROTOCOL Header;
EFI_GUID Guid;
UINT8 VendorDefinedData[1];
} VENDOR_DEFINED_MESSAGING_DEVICE_PATH;
And Debugport Device Path is a vendor-defined messaging
device path with no data, only a GUID. So it's better to
use VENDOR_DEVICE_PATH to create the Debug port device node.
typedef struct {
EFI_DEVICE_PATH_PROTOCOL Header;
EFI_GUID Guid;
} VENDOR_DEVICE_PATH;
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
ShellPkg-Cd: Ensure all valid cd targets are handled properly
Make sure that PathCleanUpDirectories() is called on all valid targets
of the cd command.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
MdePkg-BaseLib: Fix PathCleanUpDirectories() error involving "\..\.."
The loop that removes "xxxx\..\" errs when multiple "\.." sequences are
in the path. Before this change the code would modify a path like
"FS0:\efi\tools\..\.." to "FS0:\efi\\.." and then to "FS0:\efi\", but
the correct path is "FS0:\".
You can test the effect of this change in the shell by setting the
current directory to something like FS0:\efi\boot and then executing
the command "ls ..\..". Before the change you will see the files in
the FS0:\efi directory; after the change, you will see the files in
the root directory of FS0:.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
There are three warnings reported by GCC 4.8 and the later GCC release
are workaround with them.
And all the three warnings are invalid,so I just disable warnings rather
than fix them at now.
Following is the analysis from Laszlo Ersek.
(1)
> MdeModulePkg/Universal/RegularExpressionDxe/Oniguruma/regcomp.c: In
> function 'compile_length_tree':
> MdeModulePkg/Universal/RegularExpressionDxe/Oniguruma/regcomp.c:1516:7:
> warning: 'len' may be used uninitialized in this function
> [-Wmaybe-uninitialized]
> int len;
> ^
I think this is an invalid warning; the type of the controlling expression
(node->type) is enum GimmickType, and the case labels cover all values of
the enum. An assert(0) could be added, I guess, but again, upstream
Oniguruma would be justified to reject the idea.
(2)
> MdeModulePkg/Universal/RegularExpressionDxe/Oniguruma/regparse.c: In
> function 'parse_callout_args.isra.10.constprop.30':
> MdeModulePkg/Universal/RegularExpressionDxe/Oniguruma/regparse.c:6753:25:
> warning: 'rl' may be used uninitialized in this function
> [-Wmaybe-uninitialized]
> vals[n].l = rl;
> ^
This warning is invalid, given:
6749 if (cn > 0) {
6750 long rl;
6751 r = parse_long(enc, buf, bufend, 1, LONG_MAX, &rl);
6752 if (r == ONIG_NORMAL) {
6753 vals[n].l = rl;
Because parse_long() only returns ONIG_NORMAL after it sets (*rl).
(3)
> MdeModulePkg/Universal/RegularExpressionDxe/Oniguruma/regparse.c: In
> function 'parse_callout_of_name.constprop.29':
> MdeModulePkg/Universal/RegularExpressionDxe/Oniguruma/regparse.c:6861:38:
> warning: 'tag_end' may be used uninitialized in this function
> [-Wmaybe-uninitialized]
> if (! is_allowed_callout_tag_name(enc, tag_start, tag_end))
This warning is also invalid, given:
6852 if (c == '[') {
6853 if (PEND) return ONIGERR_END_PATTERN_IN_GROUP;
6854 tag_start = p;
6855 while (! PEND) {
6856 if (PEND) return ONIGERR_END_PATTERN_IN_GROUP;
6857 tag_end = p;
6858 PFETCH_S(c);
6859 if (c == ']') break;
6860 }
6861 if (! is_allowed_callout_tag_name(enc, tag_start, tag_end))
6862 return ONIGERR_INVALID_CALLOUT_TAG_NAME;
6863
To see that, first we should note:
#define PEND (p < end ? 0 : 1)
therefore PEND doesn't change if neither "p" nor "end" change.
Second, when we reach line 6855 (the "while") for the very first time,
(!PEND) is certainly true (i.e., PEND is false), because otherwise we
would have bailed at line 6853. Therefore we reach line 6857, and assign
"tag_end". Regardless of whether we iterate zero or more *additional*
times around the loop, "tag_end" will have been set, whenever we reach
line 6861.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dongao Guo <dongao.guo@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Currently, the implementation of EFI_PCI_IO_PROTOCOL::GetLocation()
in NonDiscoverablePciDeviceDxe returns the same set of dummy values
for each instance of the NON_DISCOVERABLE_DEVICE protocol that it
attaches itself to. However, this turns out to be causing problems
in cases where software (such as the ARM Compliance Test Suite [ACS])
attempts to use these values to uniquely identify controllers, since
the collisions create ambiguity in this regard.
So let's modify GetLocation() to return an arbitrary bus/device tuple
on segment 0xff instead. This is guaranteed not to clash with other
non-discoverable PCI devices, and highly unlikely to clash with real
PCIe devices.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1228
According to UEFI spec,for ACPI Expanded Device Path
when HID=PNP0A03 or CID=PNP0A03 and HID != PNP0A08,
the device path node can be displayed as: PciRoot(UID|UIDSTR)
When HID=PNP0A08 or CID=PNP0A08, the device path node can be
displayed as: PcieRoot(UID|UIDSTR). But current code miss the
code logic.
This commit is to do the enhancement.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1226
According to UEFI Spec, for ACPI Expanded Device Path,
when HIDSTR=empty, CIDSTR=empty, UID STR!=empty,
the ACPI Expanded Device Path node can be displayed as
AcpiExp(HID,CID,UIDSTR) format.
And if UID is 0 and UIDSTR is empty, then use AcpiEx format.
This patch is to correct the condition check to follow UEFI
Spec when convert the device path node to the AcpiExp text
format.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1224
When covert IFR binary to EFI_IFR_CHECKBOX structure,
Current code has following incorrect code logic:
IfrCheckBox = (EFI_IFR_CHECKBOX *) (IfrOpHdr + 1);
The correct one should be:
IfrCheckBox = (EFI_IFR_CHECKBOX *) IfrOpHdr;
1. The bug is in function "UpdateDefaultSettingInFormPackage()"
which is to update the default setting of some HII Questions
in the IFR binary data. So it only has impact when platform
overrides default setting in HII VarStore through DynamicHii
PCD setting in Platform DSC file. If platform doesn't
override default setting, it has no impact.
2. The implementation updates the "Flags" filed in the
EFI_IFR_CHECKBOX structure to update the default
setting of checkbox.
If using "IfrCheckBox = (EFI_IFR_CHECKBOX *) (IfrOpHdr + 1);"
when wants to update the " Flags" filed in checkbox,
but in fact it will update the opcode binary
data(opcode binary length) behind checkbox binary.
And then it will cause Browser can't parse the IFR
binary data correctly. And then the possible symptom
is that some HII Question and forms may be not parsed
and then cannot be shown.
This patch is to fix this bug.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This is for conformance with the TCG "Platform Reset Attack Mitigation
Specification". Because clearing the CPU caches at boot doesn't impact
performance significantly, do it unconditionally, for simplicity's
sake.
Flush the cache on all logical processors, thanks to
EFI_PEI_MP_SERVICES_PPI and CacheMaintenanceLib.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
[lersek@redhat.com: remove bogus Message-Id line from commit msg]
Create a homefilesystem environment variable whose value is the file
system on which the executing shell is located. For example: "FS14:".
This eliminates the need for people to have to try and find the "boot"
file system in their startup script. After this change they can simply
execute %homefilesystem% to set the cwd to the root of the file system
where the shell is located.
A future enhancement could be to add "homefilesystem" to the list of
predefined, read-only variables listed in the EfiShellSetEnv function of
file ShellProtocol.c
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1194
Speculative execution is used by processor to avoid having to wait for
data to arrive from memory, or for previous operations to finish, the
processor may speculate as to what will be executed.
If the speculation is incorrect, the speculatively executed instructions
might leave hints such as which memory locations have been brought into
cache. Malicious actors can use the bounds check bypass method (code
gadgets with controlled external inputs) to infer data values that have
been used in speculative operations to reveal secrets which should not
otherwise be accessed.
It is possible for SMI handler(s) to call EFI_SMM_CPU_PROTOCOL service
ReadSaveState() and use the content in the 'CommBuffer' (controlled
external inputs) as the 'CpuIndex'. So this commit will insert AsmLfence
API to mitigate the bounds check bypass issue within SmmReadSaveState().
For SmmReadSaveState():
The 'CpuIndex' will be passed into function ReadSaveStateRegister(). And
then in to ReadSaveStateRegisterByIndex().
With the call:
ReadSaveStateRegisterByIndex (
CpuIndex,
SMM_SAVE_STATE_REGISTER_IOMISC_INDEX,
sizeof(IoMisc.Uint32),
&IoMisc.Uint32
);
The 'IoMisc' can be a cross boundary access during speculative execution.
Later, 'IoMisc' is used as the index to access buffers 'mSmmCpuIoWidth'
and 'mSmmCpuIoType'. One can observe which part of the content within
those buffers was brought into cache to possibly reveal the value of
'IoMisc'.
Hence, this commit adds a AsmLfence() after the check of 'CpuIndex'
within function SmmReadSaveState() to prevent the speculative execution.
A more detailed explanation of the purpose of commit is under the
'Bounds check bypass mitigation' section of the below link:
https://software.intel.com/security-software-guidance/insights/host-firmware-speculative-execution-side-channel-mitigation
And the document at:
https://software.intel.com/security-software-guidance/api-app/sites/default/files/337879-analyzing-potential-bounds-Check-bypass-vulnerabilities.pdf
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1194
Speculative execution is used by processor to avoid having to wait for
data to arrive from memory, or for previous operations to finish, the
processor may speculate as to what will be executed.
If the speculation is incorrect, the speculatively executed instructions
might leave hints such as which memory locations have been brought into
cache. Malicious actors can use the bounds check bypass method (code
gadgets with controlled external inputs) to infer data values that have
been used in speculative operations to reveal secrets which should not
otherwise be accessed.
This commit will focus on the SMI handler(s) registered within the
Variable\RuntimeDxe driver and insert AsmLfence API to mitigate the
bounds check bypass issue.
For SMI handler SmmVariableHandler():
Under "case SMM_VARIABLE_FUNCTION_GET_VARIABLE:",
'SmmVariableHeader->NameSize' can be a potential cross boundary access of
the 'CommBuffer' (controlled external input) during speculative execution.
This cross boundary access is later used as the index to access array
'SmmVariableHeader->Name' by code:
"SmmVariableHeader->Name[SmmVariableHeader->NameSize/sizeof (CHAR16) - 1]"
One can observe which part of the content within array was brought into
cache to possibly reveal the value of 'SmmVariableHeader->NameSize'.
Hence, this commit adds a AsmLfence() after the boundary/range checks of
'CommBuffer' to prevent the speculative execution.
And there are 2 similar cases under
"case SMM_VARIABLE_FUNCTION_SET_VARIABLE:" and
"case SMM_VARIABLE_FUNCTION_VAR_CHECK_VARIABLE_PROPERTY_GET:" as well.
This commits also handles them.
Also, under "case SMM_VARIABLE_FUNCTION_SET_VARIABLE:",
'(UINT8 *)SmmVariableHeader->Name + SmmVariableHeader->NameSize' points to
the 'CommBuffer' (with some offset) and then passed as parameter 'Data' to
function VariableServiceSetVariable().
Within function VariableServiceSetVariable(), there is a sanity check for
EFI_VARIABLE_AUTHENTICATION_2 descriptor for the data pointed by 'Data'.
If this check is speculatively bypassed, potential cross-boundary data
access for 'Data' is possible to be revealed via the below function calls
sequence during speculative execution:
AuthVariableLibProcessVariable()
ProcessVarWithPk() or ProcessVarWithKek()
Within function ProcessVarWithPk() or ProcessVarWithKek(), for the code
"PayloadSize = DataSize - AUTHINFO2_SIZE (Data);", 'AUTHINFO2_SIZE (Data)'
can be a cross boundary access during speculative execution.
Then, 'PayloadSize' is possible to be revealed by the function call
sequence:
AuthServiceInternalUpdateVariableWithTimeStamp()
mAuthVarLibContextIn->UpdateVariable()
VariableExLibUpdateVariable()
UpdateVariable()
CopyMem()
Hence, this commit adds a AsmLfence() after the sanity check for
EFI_VARIABLE_AUTHENTICATION_2 descriptor upon 'Data' within function
VariableServiceSetVariable() to prevent the speculative execution.
Also, please note that the change made within function
VariableServiceSetVariable() will affect DXE as well. However, since we
only focuses on the SMM codes, the commit will introduce a new module
internal function called VariableLoadFence() to handle this. This internal
function will have 2 implementations (1 for SMM, 1 for DXE). For the SMM
implementation, it is a wrapper to call the AsmLfence() API; for the DXE
implementation, it is empty.
A more detailed explanation of the purpose of commit is under the
'Bounds check bypass mitigation' section of the below link:
https://software.intel.com/security-software-guidance/insights/host-firmware-speculative-execution-side-channel-mitigation
And the document at:
https://software.intel.com/security-software-guidance/api-app/sites/default/files/337879-analyzing-potential-bounds-Check-bypass-vulnerabilities.pdf
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1194
Speculative execution is used by processor to avoid having to wait for
data to arrive from memory, or for previous operations to finish, the
processor may speculate as to what will be executed.
If the speculation is incorrect, the speculatively executed instructions
might leave hints such as which memory locations have been brought into
cache. Malicious actors can use the bounds check bypass method (code
gadgets with controlled external inputs) to infer data values that have
been used in speculative operations to reveal secrets which should not
otherwise be accessed.
This commit will focus on the SMI handler(s) registered within the
SmmLockBox driver and insert AsmLfence API to mitigate the
bounds check bypass issue.
For SMI handler SmmLockBoxHandler():
Under "case EFI_SMM_LOCK_BOX_COMMAND_SAVE:", the 'CommBuffer' (controlled
external inputs) is passed to function SmmLockBoxSave().
'TempLockBoxParameterSave.Length' can be a potential cross boundary access
of the 'CommBuffer' during speculative execution. This cross boundary
access is later passed as parameter 'Length' into function SaveLockBox().
Within function SaveLockBox(), the value of 'Length' can be inferred by
code:
"CopyMem ((VOID *)(UINTN)SmramBuffer, (VOID *)(UINTN)Buffer, Length);".
One can observe which part of the content within 'Buffer' was brought into
cache to possibly reveal the value of 'Length'.
Hence, this commit adds a AsmLfence() after the boundary/range checks of
'CommBuffer' to prevent the speculative execution.
And there is a similar case under "case EFI_SMM_LOCK_BOX_COMMAND_UPDATE:"
function SmmLockBoxUpdate() as well. This commits also handles it.
A more detailed explanation of the purpose of commit is under the
'Bounds check bypass mitigation' section of the below link:
https://software.intel.com/security-software-guidance/insights/host-firmware-speculative-execution-side-channel-mitigation
And the document at:
https://software.intel.com/security-software-guidance/api-app/sites/default/files/337879-analyzing-potential-bounds-Check-bypass-vulnerabilities.pdf
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1194
Speculative execution is used by processor to avoid having to wait for
data to arrive from memory, or for previous operations to finish, the
processor may speculate as to what will be executed.
If the speculation is incorrect, the speculatively executed instructions
might leave hints such as which memory locations have been brought into
cache. Malicious actors can use the bounds check bypass method (code
gadgets with controlled external inputs) to infer data values that have
been used in speculative operations to reveal secrets which should not
otherwise be accessed.
This commit will focus on the SMI handler(s) registered within the
FaultTolerantWriteDxe driver and insert AsmLfence API to mitigate the
bounds check bypass issue.
For SMI handler SmmFaultTolerantWriteHandler():
Under "case FTW_FUNCTION_WRITE:", 'SmmFtwWriteHeader->Length' can be a
potential cross boundary access of the 'CommBuffer' (controlled external
inputs) during speculative execution. This cross boundary access is later
passed as parameter 'Length' into function FtwWrite().
Within function FtwWrite(), the value of 'Length' can be inferred by code:
"CopyMem (MyBuffer + Offset, Buffer, Length);". One can observe which part
of the content within 'Buffer' was brought into cache to possibly reveal
the value of 'Length'.
Hence, this commit adds a AsmLfence() after the boundary/range checks of
'CommBuffer' to prevent the speculative execution.
A more detailed explanation of the purpose of commit is under the
'Bounds check bypass mitigation' section of the below link:
https://software.intel.com/security-software-guidance/insights/host-firmware-speculative-execution-side-channel-mitigation
And the document at:
https://software.intel.com/security-software-guidance/api-app/sites/default/files/337879-analyzing-potential-bounds-Check-bypass-vulnerabilities.pdf
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
The PCDs below are unused, so they have been removed from inf.
gEfiShellPkgTokenSpaceGuid.PcdShellFileOperationSize
gEfiMdePkgTokenSpaceGuid.PcdMaximumUnicodeStringLength
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The PCDs below are unused, so they have been removed from inf.
gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize in DpApp.inf
gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize in
DpDynamicCommand.inf
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The PCDs below are unused, so they have been removed from inf.
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleMax
gEfiMdeModulePkgTokenSpaceGuid.PcdSystemRebootAfterCapsuleProcessFlag
gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeSubClassCapsule
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeProcessCapsulesBegin
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeProcessCapsulesEnd
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdatingFirmware
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdateFirmwareSuccess
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdateFirmwareFailed
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeResettingSystem
The library Pcdlib is not linked， so "#include <Library/PcdLib.h>"
is deleted.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The PCD below is unused, so it has been removed from inf.
gUefiCpuPkgTokenSpaceGuid.PcdCpuFeaturesSupport
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The input param String of AsciiStrStr() requires a pointer to
Null-terminated string, however in HttpUtilitiesParse(),
the Buffersize before AllocateZeroPool() is equal to the size
of TCP header, after the CopyMem(), it might not end with
Null-terminator. It might cause memory access overflow.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1204
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Songpeng Li <songpeng.li@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The input param String of AsciiStrStr() requires a pointer to
Null-terminated string, however in HttpTcpReceiveHeader(),
the Buffersize before AllocateZeroPool() is equal to the size
of TCP header, after the CopyMem(), it might not end with
Null-terminator. It might cause memory access overflow.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1204
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Songpeng Li <songpeng.li@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1212
UPD header files generated by GenCfgOpt.py may have
tailing white space from some of the UPD description in DSC,
especially when python script automatically switching lines
for long description string. This patch will always remove
tailing white space for UPD header files.
Test: Verified the patch can remove tailing space in
output header files when UPD DSC contains intentional
tailing white space.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Gao Liming <liming.gao@intel.com>
Cc: Zhu Yonghong <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1211
For reducing maintenance effort, the UPD offset can be
automatic assigned by GenCfgOpt.py following by alignment
requirements.
The usage model as below:
. If UPD offset in DSC file are all '*', GenCfgOpt.py will
assign offset for all UPD automatically. In this case no
need to manually hardcode offset to all UPD in DSC.
. If UPD offset in DSC file are all not '*', GenCfgOpt.py
will use hardcoded offset directly (original usage model)
. Tool does not support mixing scenario so UPD offset in DSC
should be all '*' or all hardcoded but not mixed.
In auto mode UPD offset will be assigned following natural
alignment (size aligned) rule and the whole structure size
will align to either 32bits or 64bits depends on maximal UPD
size in the structure.
Test: Verified by both UPD offset hardcoded or '*' in DSC and
generated UPD header files are correct.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Gao Liming <liming.gao@intel.com>
Cc: Zhu Yonghong <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1214
This patch only updates comment and function description, so has
no functionality impact.
This patch fixes comment typo 'end' to 'start' in GetStartPointer.
GetStartPointer for PEI and DXE has aligned function description,
but GetEndPointer does not.
This patch also aligns GetEndPointer's function description for
PEI and DXE.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The PCDs below are unused, so they have been removed from inf.
gIntelFsp2PkgTokenSpaceGuid.PcdTemporaryRamBase
gIntelFsp2PkgTokenSpaceGuid.PcdTemporaryRamSize
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
The PCDs below are unused, so they have been removed from inf.
gIntelFsp2PkgTokenSpaceGuid.PcdFspMaxPatchEntry
gIntelFsp2PkgTokenSpaceGuid.PcdFspMaxPerfEntry
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
The PCDs below are unused, so they have been removed from inf.
gIntelFsp2PkgTokenSpaceGuid.PcdFspMaxPatchEntry
gIntelFsp2PkgTokenSpaceGuid.PcdFspMaxPerfEntry
gIntelFsp2PkgTokenSpaceGuid.PcdTemporaryRamBase
gIntelFsp2PkgTokenSpaceGuid.PcdTemporaryRamSize
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Commit formats had issues so reverted 9 commits
from IntelFsp2Pkg and IntelFsp2WrapperPkg.
Will re-submit them with correct formats.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1215
This issue is caused by commit 5267926134.
The reason is this commit changed the condition of building page table
in DxeIpl. The code before it will only build page table for the sake
of PcdSetNxForStack. This commit added PcdImageProtectionPolicy and
PcdDxeNxMemoryProtectionPolicy into the logic. But the default value of
PcdImageProtectionPolicy is 02, which means the DxeIpl should build page
table. Due to the fact that EmulatorPkg doesn't support page table at all,
this will cause exception on Windows OS.
This patch solves this issue by setting PcdImageProtectionPolicy to 0
explicitly in EmulatorPkg.dsc.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1215
This issue is caused by commit 5267926134.
The reason is this commit changed the condition of building page table
in DxeIpl. The code before it will only build page table for the sake
of PcdSetNxForStack. This commit added PcdImageProtectionPolicy and
PcdDxeNxMemoryProtectionPolicy into the logic. But the default value of
PcdImageProtectionPolicy is 02, which means the DxeIpl should build page
table. Due to the fact that Nt32Pkg doesn't support page table at all,
this will cause exception on Windows OS.
This patch solves this issue by setting PcdImageProtectionPolicy to 0
explicitly in Nt32Pkg.dsc.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1212
UPD header files generated by GenCfgOpt.py may have
tailing white space from some of the UPD description in DSC,
especially when python script automatically switching lines
for long description string. This patch will always remove
tailing white space for UPD header files.
Test: Verified the patch can remove tailing space in
output header files when UPD DSC contains intentional
tailing white space.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Gao Liming <liming.gao@intel.com>
Cc: Zhu Yonghong <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1211
For reducing maintenance effort, the UPD offset can be
automatic assigned by GenCfgOpt.py following by alignment
requirements.
The usage model as below:
. If UPD offset in DSC file are all '*', GenCfgOpt.py will
assign offset for all UPD automatically. In this case no
need to manually hardcode offset to all UPD in DSC.
. If UPD offset in DSC file are all not '*', GenCfgOpt.py
will use hardcoded offset directly (original usage model)
. Tool does not support mixing scenario so UPD offset in DSC
should be all '*' or all hardcoded but not mixed.
In auto mode UPD offset will be assigned following natural
alignment (size aligned) rule and the whole structure size
will align to either 32bits or 64bits depends on maximal UPD
size in the structure.
Test: Verified by both UPD offset hardcoded or '*' in DSC and
generated UPD header files are correct.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Gao Liming <liming.gao@intel.com>
Cc: Zhu Yonghong <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1210
FixedAtBuild PCD is suggested to be used instead
of FeatureFlag PCD so extend this tool to support.
Also skipped PCDs which commented out by '#'.
Test: Verified with FixedAtBuild PCD for including or
excluding lines in generated UPD header files successfully.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Gao Liming <liming.gao@intel.com>
Cc: Zhu Yonghong <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Remove PCDs
The PCDs below are unused, so they have been removed from inf.
gIntelFsp2PkgTokenSpaceGuid.PcdTemporaryRamBase
gIntelFsp2PkgTokenSpaceGuid.PcdTemporaryRamSize
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
PCDs
The PCDs below are unused, so they have been removed from inf.
gIntelFsp2PkgTokenSpaceGuid.PcdFspMaxPatchEntry
gIntelFsp2PkgTokenSpaceGuid.PcdFspMaxPerfEntry
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
The PCDs below are unused, so they have been removed from inf.
gIntelFsp2PkgTokenSpaceGuid.PcdFspMaxPatchEntry
gIntelFsp2PkgTokenSpaceGuid.PcdFspMaxPerfEntry
gIntelFsp2PkgTokenSpaceGuid.PcdTemporaryRamBase
gIntelFsp2PkgTokenSpaceGuid.PcdTemporaryRamSize
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=967
Request to add a library function for GetAcpiTable() in order
to get ACPI table using signature as input.
After evaluation, we found there are many duplicated code to
find ACPI table by signature in different modules.
This patch adds new EfiLocateXXXAcpiTable() APIs in UefiLib
for the request and also the following patch to remove the
duplicated code.
V2:
ASSERT(FALSE) and return NULL instead of real implementation for the
new APIs as the IntelFrameworkPkg is a to-be-deprecated packages.
Cc: Younas khan <pmdyounaskhan786@gmail.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=886
This patch is to support the TFTP windowsize option described in RFC 7440.
The feature allows the client and server to negotiate a window size of
consecutive blocks to send as an alternative for replacing the single-block
lockstep schema.
Currently, the windowsize for write request operation is not supported since
there is no real use cases.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Shao Ming <ming.shao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=886
This patch is to support the TFTP windowsize option described in RFC 7440.
The feature allows the client and server to negotiate a window size of
consecutive blocks to send as an alternative for replacing the single-block
lockstep schema.
Currently, the windowsize for write request operation is not supported since
there is no real use cases.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Shao Ming <ming.shao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
If Structure PCD and Normal Pcd refer to the
same EFI variable, do EFI variable merge, otherwise, do
EFI variable combination.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Replace dict with OrderedDict for PCD so that
the pcd list has same order.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Currently, "gcc-4.8.5-28.el7_5.1.x86_64" generates the following code for
me, from the XADD inline assembly added to "X64/GccInline.c" in commit
17634d026f:
> 0000000000004383 <InternalSyncIncrement>:
> UINT32
> EFIAPI
> InternalSyncIncrement (
> IN volatile UINT32 *Value
> )
> {
> 4383: 55 push %rbp
> 4384: 48 89 e5 mov %rsp,%rbp
> 4387: 48 83 ec 10 sub $0x10,%rsp
> 438b: 48 89 4d 10 mov %rcx,0x10(%rbp)
> UINT32 Result;
>
> __asm__ __volatile__ (
> 438f: 48 8b 55 10 mov 0x10(%rbp),%rdx
> 4393: 48 8b 45 10 mov 0x10(%rbp),%rax
> 4397: b8 01 00 00 00 mov $0x1,%eax
> 439c: f0 0f c1 00 lock xadd %eax,(%rax)
> 43a0: ff c0 inc %eax
> 43a2: 89 45 fc mov %eax,-0x4(%rbp)
> : "m" (*Value) // %2
> : "memory",
> "cc"
> );
>
> return Result;
> 43a5: 8b 45 fc mov -0x4(%rbp),%eax
> }
> 43a8: c9 leaveq
> 43a9: c3 retq
>
The MOV $0X1,%EAX instruction corrupts the address of Value in %RAX before
we reach the XADD instruction. In fact, it makes no sense for XADD to use
%EAX as source operand and (%RAX) as destination operand at the same time.
The XADD instruction's destination operand is a read-write operand. The
GCC documentation states:
> The ordinary output operands must be write-only; GCC will assume that
> the values in these operands before the instruction are dead and need
> not be generated. Extended asm supports input-output or read-write
> operands. Use the constraint character `+' to indicate such an operand
> and list it with the output operands. You should only use read-write
> operands when the constraints for the operand (or the operand in which
> only some of the bits are to be changed) allow a register.
(The above is intentionally quoted from the oldest GCC release that edk2
supports, namely gcc-4.4:
<https://gcc.gnu.org/onlinedocs/gcc-4.4.7/gcc/Extended-Asm.html>.)
Fix the operand list accordingly.
With the patch applied, I get:
> 0000000000004383 <InternalSyncIncrement>:
> UINT32
> EFIAPI
> InternalSyncIncrement (
> IN volatile UINT32 *Value
> )
> {
> 4383: 55 push %rbp
> 4384: 48 89 e5 mov %rsp,%rbp
> 4387: 48 83 ec 10 sub $0x10,%rsp
> 438b: 48 89 4d 10 mov %rcx,0x10(%rbp)
> UINT32 Result;
>
> __asm__ __volatile__ (
> 438f: 48 8b 55 10 mov 0x10(%rbp),%rdx
> 4393: 48 8b 45 10 mov 0x10(%rbp),%rax
> 4397: b8 01 00 00 00 mov $0x1,%eax
> 439c: f0 0f c1 02 lock xadd %eax,(%rdx)
> 43a0: ff c0 inc %eax
> 43a2: 89 45 fc mov %eax,-0x4(%rbp)
> : // no inputs that aren't also outputs
> : "memory",
> "cc"
> );
>
> return Result;
> 43a5: 8b 45 fc mov -0x4(%rbp),%eax
> }
> 43a8: c9 leaveq
> 43a9: c3 retq
Note that some other bugs remain in
"BaseSynchronizationLib/*/GccInline.c"; those should be addressed later,
under <https://bugzilla.tianocore.org/show_bug.cgi?id=1208>.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1207
Fixes: 17634d026f
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
V3 changes include:
1. Keep the ReservedX not change if bit info not changed for this field.
V2 changes include:
1. Use X in ReservedX fields from totally new value if MSR structure definition changed.
For example, if in current structure, the max reserved variable is Reserved2, in new
definition, reserved variable is begin with Reserved3.
V1 Changes:
Changes includes:
1. Update MSR structure definition, change some reserved fields to useful fields:
1. MSR_XEON_PHI_PKG_CST_CONFIG_CONTROL_REGISTER
2. MSR_XEON_PHI_SMM_MCA_CAP_REGISTER
2. For MSR_XEON_PHI_PMG_IO_CAPTURE_BASE_REGISTER structure, it expand the field range.
Old definition like below:
typedef union {
///
/// Individual bit fields
///
struct {
///
/// [Bits 15:0] LVL_2 Base Address (R/W).
///
UINT32 Lvl2Base:16;
///
/// [Bits 18:16] C-state Range (R/W) Specifies the encoding value of the
/// maximum C-State code name to be included when IO read to MWAIT
/// redirection is enabled by MSR_PKG_CST_CONFIG_CONTROL[bit10]: 100b - C4
/// is the max C-State to include 110b - C6 is the max C-State to include.
///
UINT32 CStateRange:3;
UINT32 Reserved1:13;
UINT32 Reserved2:32;
} Bits;
///
/// All bit fields as a 32-bit value
///
UINT32 Uint32;
///
/// All bit fields as a 64-bit value
///
UINT64 Uint64;
} MSR_XEON_PHI_PMG_IO_CAPTURE_BASE_REGISTER;
This patch make below changes for this data structure, it expand "CStateRange" field width.
old one:
UINT32 CStateRange:3;
UINT32 Reserved1:13;
new one:
UINT32 CStateRange:7;
UINT32 Reserved1:9;
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
V3 changes include:
1. Keep ReservedX not change if bit info not changed for this field.
V2 changes include:
1. Use X in ReservedX fields from totally new value if MSR structure definition changed.
For example, if in current structure, the max reserved variable is Reserved2, in new
definition, reserved variable is begin with Reserved3.
V1 Changes includes:
1. Change fields which is reserved in old version: MSR_IA32_RTIT_CTL_REGISTER
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Latest SDM has moved MSR related content from volume 3 chapter 35 to volume 4
chapter 2. Current MSR's comments need to be updated to reference the new
chapter info.
Changes includes:
1. Update referenced chapter info from some MSRs.
2. Update referenced SDM version info.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1187
The patch reverts 9c8c4478cf
"UefiCpuPkg/MtrrLib: Skip Base MSR access when the pair is invalid".
Microsoft Windows will report an error in event manager if MTRR
usage is different across hibernate even when the difference is
in an non valid MTRR pair. This seems like a bug in Windows but
for compatibility and servicing reasons we think a change in UEFI
would wise.
A Windows change has already been submitted for the next iteration
(2019 time frame).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
The change doesn't have functionality impact.
It just renames the mIoMmuProtocol to mIoMmu and moves the
declaration from PciRootBridgeIo.c to PciHostBridge.h.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Suggested-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1196
RootBridgeIoCheckParameter() verifies that the requested MMIO access
can fit in any of the MEM/PMEM 32/64 ranges. But today's logic
somehow only checks the requested access against MEM 32/64 ranges.
It should also check the requested access against PMEM 32/64 ranges.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Garrett Kirkendall <garrett.kirkendall@amd.com>
BZ#1116: https://bugzilla.tianocore.org/show_bug.cgi?id=1116
The usage of following PCDs described in MdeModulePkg.dec don't match
the implementation exactly. This patch updates related description in
both .dec and .uni files to avoid confusion in platform configuration.
PcdSetNxForStack
PcdImageProtectionPolicy
PcdDxeNxMemoryProtectionPolicy
The main change is at the statement on how to handle the FALSE or 0
setting value in those PCDs. Current statement says the implementation
should unset or disable related features but in fact the related code
just do nothing (leave it to AS-IS). That means the result might be
disabled, or might be not. It depends on other features or platform
policy.
For example, if one don't want to enforce NX onto stack memory, he/she
needs to set PcdSetNxForStack to FALSE as well as to clear BIT4 of
PcdDxeNxMemoryProtectionPolicy.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
The following rules are specially proposed by package owner:
* Remove CommonIpf.dsc file.
* Update Common.dsc file, to remove the section with IPF key.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
The following rules are specially proposed by package owner:
* Remove whole "CryptRuntimeDxe" folder which was designed for IPF.
* Remove whole "Include/Protocol" folder
* Update .Dec and .Dsc file accordingly.
Cc: Qin Long <qin.long@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Remove PalLib in dsc which was missed at 64bbf1d.
The PalLib is IPFspecific and will be removed from MdePkg.
So this patch removes PalLib in IntelFrameworkModulePkg.dsc
which was missed at 64bbf1dee2.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1197
Today's InterlockedIncrement()/InterlockedDecrement() guarantees to
perform atomic increment/decrement but doesn't guarantee the return
value equals to the new value.
The patch fixes the behavior to use "XADD" instruction to guarantee
the return value equals to the new value.
The patch calls intrinsic functions for MSVC tool chain, calls the
NASM implementation for INTEL tool chain and calls GCC inline
assembly implementation (GccInline.c) for GCC tool chain.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
For structure Pcd, the latter full assign value in commandLine should
override the former field assign value. For example in commandLine,
build --pcd Token.pcd.field="haha" --pcd Token.pcd=H"{0x01,0x02}",
the former field value "haha" will be ignored and overwrite by the latter
full value "{0x01,0x02}".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1191
Before commit e21e355e2c, jmp _SmiHandler
is commented. And below code, ASM_PFX(CpuSmmDebugEntry) is moved into rax,
then call it. But, this code doesn't work in XCODE5 tool chain. Because XCODE5
doesn't generated the absolute address in the EFI image. So, rax stores the
relative address. Once this logic is moved to another place, it will not work.
; jmp _SmiHandler ; instruction is not needed
...
mov rax, ASM_PFX(CpuSmmDebugEntry)
call rax
Commit e21e355e2c is to support XCODE5.
One tricky way is selected to fix it. Although SmiEntry logic is copied to
another place and run, but here jmp _SmiHandler is enabled to jmp the original
code place, then call ASM_PFX(CpuSmmDebugEntry) with the relative address.
mov rax, strict qword 0 ; mov rax, _SmiHandler
_SmiHandlerAbsAddr:
jmp rax
...
call ASM_PFX(CpuSmmDebugEntry)
Now, BZ 1191 raises the issue that SmiHandler should run in the copied address,
can't run in the common address. So, jmp _SmiHandler is required to be removed,
the code is kept to run in copied address. And, the relative address is
requried to be fixed up to the absolute address. The necessary changes should
not affect the behavior of platforms that already consume PiSmmCpuDxeSmm.
OVMF SMM boot to shell with VS2017, GCC5 and XCODE5 tool chain has been verified.
...
mov rax, strict qword 0 ; call ASM_PFX(CpuSmmDebugEntry)
CpuSmmDebugEntryAbsAddr:
call rax
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
After admin password reach the TryLimit value, code logic will direct return
error password result no matter which password been inputted. So even correct
user password will return TryLimit error.
Now update code logic to also check user password. Only when both user/admin
password reach the TryLimit count, code will return exceed TryLimit error.
Change-Id: I17fbd1425b77150eb933a5002a1f87a0f0032e9b
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1182
Some devices can be non removable (such as eMMC) and checking
Present State Register on host controller may falsely return
an information that device is not present. Execute this
check conditionally on the SloType field value.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1185
SdMmcHcReset used to set all bits of Software Reset Register to 1
including reserved ones, which on some controllers may result in
timeout.
Now only first bit is set, which means "Software Reset for All".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
FlexibleFieldName was never used not set.
DefinitionPosition (file and line number) are recalculated
and never used outside the function. remove the saving of the
data.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
1) use namedtuple instead of custom class when apropriate
2) rename collections.OrderedDict to OrderedDict since we import it already
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
1) use decorators
2) also change some private functions to public when all callers are
external
3) change external callers to use functions instead of directly
accessing private data.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1152
v2: Sync the same logic to Ipv6 and update code comments.
The PXE driver installs a SNP and open this SNP with attribute BY_DRIVER
to avoid it being opened by MNP driver, this SNP is also expected not to
be opened by other drivers with EXCLUSIVE attribute. In some cases, other
drivers may happen to do this by error, and thus cause a system crash.
This patch adds EXCLUSIVE attribute when opening SNP in PXE driver, and
will reject all OpenProtocol requests by EXCLUSIVE.
Cc: Subramanian, Sriram <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1169
PCI spec:
They are also required to always implement function 0 in the device.
Implementing other functions is optional and may be assigned in any
order (i.e., a two-function device must respond to function 0 but
can choose any of the other possible function numbers (1-7) for the
second function).
This patch updates ScanPciBus() to not scan other functions if
function 0 is not implemented.
Test done:
Added debug code below in the second loop of ScanPciBus(),
compared the debug logs with and without this patch, many
non-0 unimplemented functions are skipped correctly.
DEBUG ((
DEBUG_INFO,
"%a() B%02xD%02xF%02x VendorId: %04x DeviceId: %04x\n",
__FUNCTION__,
Bus,
Device,
Function,
VendorID,
DeviceID
));
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
Cc: Tomson Chang <tomson.chang@intel.com>
Cc: Jenny Huang <jenny.huang@intel.com>
Cc: Amy Chan <amy.chan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=996
Issue:
In current code logic, when a key is pressed, it will search
the whole NotifyList to find whether a notification has been
registered with the keystroke. if yes, it will en-queue the
key for notification execution later. And now if different
notification functions have been registered with the same key,
then the key will be en-queued more than once. Then it will
cause the notification executed more than once.
This patch is to enhance the code logic to fix this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=996
Issue:
In current code logic, when a key is pressed, it will search
the whole NotifyList to find whether a notification has been
registered with the keystroke. if yes, it will en-queue the
key for notification execution later. And now if different
notification functions have been registered with the same key,
then the key will be en-queued more than once. Then it will
cause the notification executed more than once.
This patch is to enhance the code logic to fix this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=996
Issue:
In current code logic, when a key is pressed, it will search
the whole NotifyList to find whether a notification has been
registered with the keystroke. if yes, it will en-queue the
key for notification execution later. And now if different
notification functions have been registered with the same key,
then the key will be en-queued more than once. Then it will
cause the notification executed more than once.
This patch is to enhance the code logic to fix this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: <Jiewen.yao@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: <Jiewen.yao@intel.com>
This patch align the boolean type PCD value's display in the build
report. Original it may display 0x0, also may use 0 for the same PCD.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Add NmakeSubdirs.py to replace NmakeSubdirs.bat in VS Makefile. This script will
invoke nmake in multi thread mode. It can save more than half time of BaseTools
C clean build.
GCC make supports multiple thread in make phase. So, GNUmakefile doesn't need apply
this script.
single task or job=1:
just single thread and invoke subprocess,subprocess will use
system.stdout to print output.
multi task:
thread number is logic cpu count.All subprocess output will pass to
python script by PIPE and then script print it to system.stdout.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dongao Guo<dongao.guo@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Test-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1167
When the HSEE in the USBCMD bit is a ‘1’ and the HSE bit in the
USBSTS register is a ‘1’, the xHC shall assert out-of-band error
signaling to the host and assert the SERR# pin.
To prevent masking any potential issues with SERR, this patch is
to set USBCMD Host System Error Enable(HSEE) Bit if PCICMD SERR#
Enable Bit is set.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Fei1 Wang <fei1.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Build tool should report warning if a platform
defines [DefaultStores] but forgets to defined
PcdNvStoreDefaultValueBuffer as PcdsDynamicExVpd in dsc file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch is going to fix the issue that
The Pcd field value is override incorrectly when there
is no Pcd overall value assignment in Dsc file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The case is user use 0x1} as a hex value for Pcd, it directly cause
tool report traceback info. This patch add more error info.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Today's implementation does an exact device path match to check
whether the device path of a console is in ConIn/ConOut/ErrOut.
But that doesn't work for the USB keyboard.
Because when a platform have multiple USB port, ConIn needs to
carry all device paths corresponding to each port.
Even worse, today's BDS core logic removes the device path from
ConIn/ConOut/ErrOut when the connection to that device path fails.
So if user switches the USB keyboard from one port to another across
boot, the USB keyboard doesn't work in the second boot.
ConPlatform driver solved this problem by adding the
IsHotPlugDevice() function. So that for USB keyboard, ConPlatform
doesn't care whether its device path is in ConIn or not.
But the rule is too loose, and now causes platform BDS cannot control
whether to enable USB keyboard as an active console.
The patch changes ConPlatform to support USB short-form device path
when checking whether the device path of a console is in
ConIn/ConOut/ErrOut.
The logic to always accept USB/PCCARD device as active console is
removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When build with WinSDK <= Win10 TH2, the terminal over CMD.exe
doesn't work. Because Win10 later than TH2 starts to support VT
terminal.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Since the emulator under Windows is enabled, the patch changes
README to include the information of emulator under Windows.
It also changes README to Readme.md for better looking.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
This feature is the same as Stack Guard enabled in driver CpuDxe but
applies to PEI phase. Due to the specialty in PEI module dispatching,
this driver is changed to do the actual initialization in notify
callback of event gEfiPeiMemoryDiscoveredPpiGuid. This can let the
stack guard apply to as most PEI drivers as possible.
To let Stack Guard work, some simple page table management code are
introduced to setup Guard page at base of stack for each processor.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: "Ware, Ryan R" <ryan.r.ware@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Stack Guard needs to setup stack switch capability to allow exception
handler to be called with good stack if stack overflow is detected.
This patch update InitializeCpuExceptionHandlersEx() to allow pass
extra initialization data used to setup exception stack switch for
specified exceptions.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: "Ware, Ryan R" <ryan.r.ware@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
PEI Stack Guard needs to enable paging before DxeIpl. This might cause
#GP in the transition from 32-bit PEI to 64-bit DXE due to the code
trying to write CR3 register with PML4 page table while the processor
is enabled with PAE paging.
Simply disabling paging before updating CR3 can solve this conflict.
There's no such issue for 64-bit PEI so this change applies only to
32-bit code.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: "Ware, Ryan R" <ryan.r.ware@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
In V2, Remove GetImageReadFunction(), directly use PeiImageRead().
The copy PeiImageReadForShadow function doesn't improve the boot performance.
This patch removes this copy logic to simplify the code logic.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
UEFI Sct validates Dma mapping. For CoherentDmaLib it always failed
because there were no required checks present in DmaMap.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The only valid memory types for DmaAlignedBuffer should be
EfiBootServicesData and EfiRuntimeServicesData. However due to the typo,
there is no way to allocate runtime pages, and INVALID_PARAMETER is
always returned. Fix the typo.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The EhcReset(), EhcGetRootHubPortStatus() and EhcDriverBindingStart()
functions need to see whether the host controller (or a specific port on
the host controller) can be accessed, dependent on the controller having
(or the specific port being) an in-use debug port. Because the condition
isn't simple, extract it to a separate function.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Suggested-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Some local variables are initialized but never used.
GCC complains about that. The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1145
Currently run PatchCheck.py with Python3 will meet
following error:
.....
File "PatchCheck.py", line 554, in run_git
return Result[0].decode('utf-8', 'ignore') if Result[0] and
Result[0].find("fatal")!=0 else None
TypeError: a bytes-like object is required, not 'str'
This issue was introduce by commit:5ac4548cdf654.
This patch is to convert the str object of "fatal" to
byte object to fix this failure.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Defined a pcd in Ovmf.dec and used that pcd in AcpiPlatformDxe.inf,
then assign a value to that pcd from DSC, then build Ovmf platform
successfully. But this Pcd was wrongly listed into not used section
in the report.txt file.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Fix trailing white spaces and invalid line ending issue.
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Commit 09943f5ecc ("MdeModulePkg: Skip to manage usb debug port in EDKII
EHCI driver if it's used by usb debug port driver", 2012-04-28) made the
host controller reset in EhcDriverBindingStart() conditional. The intent
was to avoid the reset when
- one of the USB ports on the host controller was a Debug Port, AND
- the Debug Port was in use.
This translates to the following positive condition: reset the controller
only if:
- no USB port on the host controller is a Debug Port, OR
- the Debug Port is not in use.
Commit 09943f5ecc failed to implement the first subcondition, and thus
the result is too strict now (for resetting the host controller). Relax it
to the correct condition.
This issue was found by Steven Shi on QEMU. QEMU's EHCI device model does
not have a Debug Port. In repeated disconnect / connect cycles, the
controller is never reset in EhcDriverBindingStart(), therefore the
devices on the controller are never re-enumerated after a disconnect.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reported-by: Steven Shi <steven.shi@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1129
Fixes: 09943f5ecc
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Tested-by: Steven Shi <steven.shi@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1115
When the type of HiiValue is EFI_IFR_TYPE_BUFFER,
its question type is EFI_IFR_ORDERED_LIST_OP.
And the buffer size allocated for Statement->BufferValue
of orderedList is "Statement->StorageWidth"
in IfrParse.c.
So here when backup the buffer value and copy the size of
"Statement->StorageWidth + sizeof(CHAR16)" is incorrect.
This patch is to fix this issue.
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
When an exception happens in AP, system hangs at
GetPeiServicesTablePointer(), complaining the PeiServices retrieved
from memory before IDT is NULL.
Due to the following commit:
c563077a38
* UefiCpuPkg/MpInitLib: Avoid calling PEI services from AP
the IDT used by AP no longer preserve PeiServices pointer in the
very beginning.
But the implementation of PeiExceptionHandlerLib still assumes
the PeiServices pointer is there, so the assertion happens.
The patch fixes the exception handler library to not call
PEI services from AP.
The patch duplicates the #0 exception stub header in an allocated
pool but with extra 4-byte/8-byte to store the exception handler
data which was originally stored in HOB.
When AP exception happens, the code gets the exception handler data
from the exception handler for #0.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Fan Jeff <vanjeff_919@hotmail.com>
Today's implementation of handling HOOK_BEFORE and HOOK_AFTER is
a bit complex. More comments is better.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Fan Jeff <vanjeff_919@hotmail.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
1. Not append trailing zero for PcdValue
2. make sure the point to Variable Name in PCD
DataBase 2 bytes aligned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Fixed the pcd value override issue when Dynamic Pcd is from
command line but is not list in Dsc file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch updates IP4 stack to support 32bit subnet mask in PXE boot process.
When 32bit subnet mask is used, the IP4 driver couldn't use the subnet mask to determine
whether destination IP address is on-link or not, so it will always try to send all the
packets to the destination IP address directly first, if failed it will continue
to try the default gateway.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1121
To produce a EFI_BLOCK_IO_PROTOCOL instance in Emulator platform,
EmulatorPkg defines the EMU_IO_THUNK_PROTOCOL. OS dependent layer
needs to produce this protocol implementation and a generic OS
independent layer consumes this protocol to produce
EFI_BLOCK_IO_PROTOCOL.
EMU_IO_THUNK_PROTOCOL can also be used to abstract the OS dependent
IO operation for other UEFI protocols, e.g.: GOP, SimpleFileSystem
and etc.
It contains two interfaces Open() and Close(). Open() creates the
specific IO instances, e.g. for Block IO access, File System access,
Screen access, etc. Close() destroys the specific IO instances.
Later on the Emulator generic module (e.g.: EmuBlockIoDxe) calls
Open() to create the IO instance in DriverBindingStart() and calls
Close() in DriverBindingStop().
But today's implementation of DriverBindingStop() contains a bug
that it calls Close() before uninstalling the EFI_BLOCK_IO_PROTOCOL.
It's a mistake in code. Take EFI_BLOCK_IO for example,
the uninstallation may cause the upper layer driver that consumes
EFI_BLOCK_IO call BlockIo.Reset(), which consequently calls
EmuBlockIo.Reset(). But the EmuBlockIo instance is already destroyed
by Close() that happens before uninstallation.
So a proper implementation is to call Close() after uninstallation
succeeds.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1121
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Andrew Fish <afish@apple.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1120
Logo is enabled by adding a separate core driver LogoDxe.
UiApp and BootManagerMenuApp are added to provide two UIs.
LoadFileOnFv2 is added to auto-install LoadFile protocol for
applications in FV so the boot options for applications can be
auto-created from LoadFile.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
Developer can build the Win Host in VS2017 and launch to debug it.
Platform 'x64' is to build 64bit EmulatorWin.
Platform 'Win32' is to build 32bit EmulatorWin.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1119
Today's implementation reports CPU address size as 36 through CPU
HOB. But when WinHost is running at 64bit, the system memory might
be allocated above 2^36.
It causes system asserts when DxeCore code tries to find the
corresponding GCD entry for a given valid address.
The patch uses 57 as the CPU address size which is maximum linear
address size when 5-level paging is enabled in host OS.
Using 64 seems more proper and a one-time change even 6-level
paging might be invented. But it causes CoreInitializeGcdServices()
assertion on following code:
Entry->EndAddress = LShiftU64 (1, SizeOfMemorySpace) - 1;
Because LShiftU64 expects SizeOfMemorySpace < 64.
So to be practical, I didn't report 64 and change
CoreInitializeGcdServices().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
IsSupportedArch and IsBinaryModule return the same value under the same
curcimstances. Remove newer one with fewer callers and send them to the
other function.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1099
Update SmbiosView to parse the new definitions which
are introduced in SMBIOS3.2.0
V2:
1. Add structure length check before dump the fileds in
Type 9 and Type 17 in case some fileds are not organized
and reported by drivers.
2. Dump the InterfaceTypeSpecificData in Type 42.
V3:
1. Correct the structure length in Type17.
2. Remove the redundant check "if (PeerGroupCount > 0)" in Type 9.
3. Use the Uint16 filed instead of Bits field in union
MEMORY_DEVICE_OPERATING_MODE_CAPABILITY to dump data.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The patch is the result of running
"BaseTools/Scripts/FormatDosFiles.py EmulatorPkg/"
No functionality impact.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
BZ#1127: https://bugzilla.tianocore.org/show_bug.cgi?id=1127
It's reported the debug message in CpuDxe driver is quite annoying in
boot and shell, and slow down the boot process. To solve this issue,
this patch changes the DEBUG_INFO to DEBUG_VERBOSE. On a typical Intel
real platform, at least 16s boot time can be saved.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Since SMM profile feature has already implemented non-stop mode if #PF
occurred, this patch just makes use of the existing implementation to
accommodate heap guard and NULL pointer detection feature.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Same as SMM profile feature, a special #PF is used to set page attribute
to 'present' and a special #DB handler to reset it back to 'not-present',
right after the instruction causing #PF got executed.
Since the new #PF handler won't enter into dead-loop, the instruction
which caused the #PF will get chance to re-execute with accessible pages.
The exception message will still be printed out on debug console so that
the developer/QA can find that there's potential heap overflow or null
pointer access occurred.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Once the #PF handler has set the page to be 'present', there should
be a way to reset it to 'not-present'. 'TF' bit in EFLAGS can be used
for this purpose. 'TF' bit will be set in interrupted function context
so that it can be triggered once the cpu control returns back to the
instruction causing #PF and re-execute it.
This is an necessary step to implement non-stop mode for Heap Guard
and NULL Pointer Detection feature.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
The change is part of requirement tracked by #BZ1095
https://bugzilla.tianocore.org/show_bug.cgi?id=1095
Background:
Heap Guard and NULL Pointer Detection are very useful features to detect
code flaw in EDK II. If an issue is detected, #PF exception will be
triggered and the BIOS will enter into dead loop, which is the default
behavior of exception handling. From QA perspective, this default behavior
will block them to collect all tests result in reasonable time.
The solution is to introduce non-stop mode to Heap Guard and NULL Pointer
Detection features. This needs to update CpuDxe, PiSmmCpuDxeSmm and
CpuExceptionHandlerLib to allow the code to continue execution after #PF.
The mechanism behind it is the same as SMM Profile feature, in which a
special #PF handler is registered to set the page causing #PF to be
'present' and setup single steop trap, then return the control back to
the instruction accessing that page. Once the instruction is re-executed,
a #DB is triggered and a special handler for it will be called to reset
the page back to 'not-present'.
The non-stop mode is controlled by BIT6 of following PCDs
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPropertyMask
gEfiMdeModulePkgTokenSpaceGuid.PcdNullPointerDetectionPropertyMask
BIT6 of PcdHeapGuardPropertyMask is used to enable/disable non-stop mode
of Heap Guard feature. It applies to both UEFI and SMM heap guard, if
any of them is enabled.
BIT6 of PcdNullPointerDetectionPropertyMask is used to enable/disable
non-stop mode of NULL Pointer Detection feature. It applies to both
UEFI and SMM NULL Pointer Detection, if any of them is enabled.
The default setting is 'disable', meaning the boot will stop at #PF
exception.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
current use (0x41>=~0x0&0x41|0x0) as Pcd value cause build failure
because the ~ is not correctly recognized.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add check for the datum type keyword "VOID*", only the VOID* type
Pcd need the additional maxsize info.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Call BS.AllocatePages in DXE driver and call SMM FreePages with the address of the buffer allocated in the DXE driver. SMM FreePages success and add a non-SMRAM range into SMM heap list. This is not an expected behavior. SMM FreePages should return error for this case and not free the pages.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1098
Change-Id: Ie5ffa1ac62c558aa418a8a3d7d0e8158b846e13b
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1099
Add SMBIOS 3.2.0 definitions according to
www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.2.0.pdf.
Processor Information (Type 4):
- SMBIOSCR00163: add socket LGA2066
- SMBIOSCR00173: add Intel Core i9
- SMBIOSCR00176: add new processor sockets
Port Connector Information (Type 8):
- SMBIOSCR00168: add USB Type-C
System Slots (Type 9):
- SMBIOSCR00164: add "unavailable" to current usage field
- SMBIOSCR00167: add support for PCIe bifurcation
Memory Device (Type 17):
- SMBIOSCR00162: add support for NVDIMMs
- SMBIOSCR00166: extend support for NVDIMMs and add support for logical memory type
- SMBIOSCR00172: rename "Configured Memory Clock Speed" to "Configured Memory Speed"
- SMBIOSCR00174: add new memory technology value (Intel Persistent Memory, 3D XPoint)
IPMI Device Information (Type 38):
- SMBIOSCR00171: add SSIF
Management Controller Host Interface (Type 42)
- SMBIOSCR00175: fix structure data parsing issue
V2: Add missing update to MISC_PORT_TYPE and SMBIOS_TABLE_TYPE9.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The EDK Shell is end of line so the FS mapping to old EDK
Shell bin directory is better to be removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1117
The root cause is when a file is opened through File.Open(), the
private data for the File is not allocated, so when later
when File.Close() is called, the signature check in CR() causes
the assertion.
The private data for the File is allocated properly when the file
is opened from FS.OpenVolume().
The patch also fixes a minor issue that wrongly assigns
revision number to File.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1079
Without signal of EndOfDxe, the 3rd party code (.efi from non-flash
storage) cannot run. It's forbidden by
8be37a5cee
*MdeModulePkg/SecurityStubDxe: Defer 3rd party image before EndOfDxe
The patch enables running of SCT from internal shell.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
Now firmware can display the time correctly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
Now the firmware can boot to Shell and count down 5 seconds to
command prompt.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
The patch adds GOP and SimpleTextIn[Ex] support.
Now firmware can boot to UI and Shell but timer doesn't work.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Andrew Fish <afish@apple.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The patch implements Stdin/Stdout/Stderr access so that
the native OS console (cmd.exe) can be used as the firmware
console and debug message can also be routed to it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
This is the initial patch to make it boot to early DXE
phase without display (only debug message).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
VS compiler complains converting UINTN to UINT16 causes data lost.
Add typecast to fix the build failure.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Andrdw Fish <afish@apple.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1109
Today's restriction of VGA device is to have only one VGA device
enabled per PCI segment. It's not correct because several segments
may share one IO / MMIO address space.
We should restrict to have one VGA per Host Bridge because each
Host Bridge has its only IO / MMIO address space.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1109
The patch doesn't change any behavior of this function.
It just renames the function to LocateVgaDevice() and renames
some parameters and local variables.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Since hotkey 'f' is used to start AndroidFastbootApp. If user
press 'f' key too long, it may be recognized pressing 'f' key
multiple times. Then AndroidFastbootApp exists since it delcares
any key press could make it exit.
So only use ENTER or SPACE key to exit AndroidFastbootApp.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The redundant functions which are never called have been removed.
They are AtaNonDataCommandInExt,IDEBusDriverConfigurationSetOptions,
GetResponse,IDEBusDriverConfigurationOptionsValid and
IDEBusDriverConfigurationForceDefaults.
https://bugzilla.tianocore.org/show_bug.cgi?id=1063
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
V2: Add --target-name to specify the file name to create
Because Ecc.py was renamed to EccMain.py
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In commit 81502cee20 ("BaseTools/Source/C: take EXTRA_LDFLAGS from the
caller", 2018-08-16), I missed that "VfrCompile/GNUmakefile" does not use
BUILD_LFLAGS in the APPLICATION linking rule, unlike "app.makefile" does.
Instead, "VfrCompile/GNUmakefile" uses the (undefined) LFLAGS macro.
Therefore commit 81502cee20 did not cover the linking step of
VfrCompile.
Thankfully, the structure of the linking rules is the same, between
"app.makefile" and "VfrCompile/GNUmakefile". Rename the undefined LFLAGS
macro in "VfrCompile/GNUmakefile" to VFR_LFLAGS (for consistency with
VFR_CXXFLAGS), and set it to EXTRA_LDFLAGS.
As a result, we have:
| compilation | linking
-----------+--------------------------------+----------------------
VfrCompile | VFR_CXXFLAGS = | VFR_LFLAGS =
| BUILD_OPTFLAGS = | EXTRA_LDFLAGS
| '-O2' + EXTRA_OPTFLAGS |
-----------+--------------------------------+----------------------
other apps | BUILD_CFLAGS/BUILD_CXXFLAGS = | BUILD_LFLAGS =
| [...] + BUILD_OPTFLAGS = | [...] + EXTRA_LDFLAGS
| [...] + '-O2' + EXTRA_OPTFLAGS |
This table shows
- that the VfrCompile compilation and linking flags are always a subset of
the corresponding flags used by the other apps,
- and that the EXTRA flags are always at the end.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1540244
Fixes: 81502cee20
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
While reviewing the patch that would land as 768b611136
("MdePkg/UefiLib: introduce EfiOpenFileByDevicePath()", 2018-08-16), Ray
pointed out that distinguishing EFI_FILE_MODE_CREATE was wasteful. Per
spec, if the file to create exists, then EFI_FILE_MODE_CREATE is ignored
by EFI_FILE_PROTOCOL.Open(), and the existent file is opened.
Therefore we don't need an attempt to "open-but-not-create" first, and a
fallback to "open-and-create-too" second -- that behavior is internal to
EFI_FILE_PROTOCOL.Open(). Remove the special-casing of
EFI_FILE_MODE_CREATE.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Suggested-by: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1074
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1.After the cleanup at "MdeModulePkg UiApp: Remove redundant functions",
the function "IsResetReminderFeatureEnable()" and the variable
"mFeaturerSwitch" become redundant so they have been removed.
2.Therefore, the "IF" expression has also been removed, whose judgment condition
is "IsResetReminderFeatureEnable()".
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The functions that are never called have been removed.
They are IsImageInsideSmram,FindImageRecord,SmmRemoveImageRecord,
SmmMemoryAttributesTableConsistencyCheck,DumpSmmMemoryMapEntry,
SmmMemoryMapConsistencyCheckRange,SmmMemoryMapConsistencyCheck,
DumpSmmMemoryMap,ClearGuardMapBit,SetGuardMapBit,AdjustMemoryA,
AdjustMemoryS,IsHeadGuard and IsTailGuard.
FindImageRecord() is called by SmmRemoveImageRecord(); however,
nothing calls SmmRemoveImageRecord().
SmmMemoryMapConsistencyCheckRange() is called by
SmmMemoryMapConsistencyCheck(); however, nothing calls
SmmMemoryMapConsistencyCheck().
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
v2:append the following to the commit message.
- FindImageRecord() is called by SmmRemoveImageRecord(); however,
nothing calls SmmRemoveImageRecord().
- SmmMemoryMapConsistencyCheckRange() is called by
SmmMemoryMapConsistencyCheck(); however, nothing calls
SmmMemoryMapConsistencyCheck().
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The functions that are never called have been removed.
They are UfsPeimUnlinkMemBlock,UfsPeimRequestSense,
UfsPeimInquiry,UfsRwAttributes,UfsClearFlag,UfsReadFlag
and UfsFindAvailableSlotInTmrl.
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
v2: Remove the comment that mentioned 'UfsPeimUnlinkMemBlock'
within function UfsPeimFreeMemPool().
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1093
Return Stack Buffer (RSB) is used to predict the target of RET
instructions. When the RSB underflows, some processors may fall back to
using branch predictors. This might impact software using the retpoline
mitigation strategy on those processors.
This commit will add RSB stuffing logic before returning from SMM (the RSM
instruction) to avoid interfering with non-SMM usage of the retpoline
technique.
After the stuffing, RSB entries will contain a trap like:
@SpecTrap:
pause
lfence
jmp @SpecTrap
A more detailed explanation of the purpose of commit is under the
'Branch target injection mitigation' section of the below link:
https://software.intel.com/security-software-guidance/insights/host-firmware-speculative-execution-side-channel-mitigation
Please note that this commit requires further actions (BZ 1091) to remove
the duplicated 'StuffRsb.inc' files and merge them into one under a
UefiCpuPkg package-level directory (such as UefiCpuPkg/Include/).
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1091
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1093
Return Stack Buffer (RSB) is used to predict the target of RET
instructions. When the RSB underflows, some processors may fall back to
using branch predictors. This might impact software using the retpoline
mitigation strategy on those processors.
This commit will add RSB stuffing logic before returning from SMM (the RSM
instruction) to avoid interfering with non-SMM usage of the retpoline
technique.
After the stuffing, RSB entries will contain a trap like:
@SpecTrap:
pause
lfence
jmp @SpecTrap
A more detailed explanation of the purpose of commit is under the
'Branch target injection mitigation' section of the below link:
https://software.intel.com/security-software-guidance/insights/host-firmware-speculative-execution-side-channel-mitigation
Please note that this commit requires further actions (BZ 1091) to remove
the duplicated 'StuffRsb.inc' files and merge them into one under a
UefiCpuPkg package-level directory (such as UefiCpuPkg/Include/).
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1091
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The issue was found when heap guard is turned on.
PrintLib somehow receives a non-null terminated string in var-arg.
When the PrintLib implementation reads the string it keeps
reading because no null-terminator is met, which triggers the page
fault set by the heap guard.
The issue is caused by a bug in FileBufferPrintLine().
When "edit" opens a binary file, in FileBufferPrintLine(),
the Line->Buffer may start with \x00 \x00, but the Line->Size is
larger than MainEditor.ScreenSize.Column, it causes the PrintLine is
set to an empty string by below call:
StrnCpyS (
PrintLine, BufLen/sizeof(CHAR16), Buffer,
MIN(Limit, MainEditor.ScreenSize.Column)
);
But since Limit (equals to Line->Size) is larger than
MainEditor.ScreenSize.Column, below for-loop doesn't successfully
set the whole PrintLine to all-empty-space.
for (; Limit < MainEditor.ScreenSize.Column; Limit++) {
PrintLine[Limit] = L' ';
}
So after the for-loop, PrintLine is still an empty string.
Later in below call, the PrintLine2 is created based on PrintLine.
ShellCopySearchAndReplace (
PrintLine, PrintLine2,
BufLen * 2, L"%", L"^%", FALSE, FALSE
);
But due to the implementation of ShellCopySearchAndReplace(),
PrintLine2 is untouched and INVALID_PARAMETER is returned.
Finally an uninitialized string is passed to ShellPrintEx()
which causes the #PF exception.
The fix is to reset Limit to StrLen(PrintLine) before for-loop.
So that PrintLine can be converted from an empty string to a
string containing all spaces.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jian Wang <jian.j.wang@intel.com>
Don't iterate over new dictionaries with one item
Create the data and then add to dictionary.
Note: if you diff ignoring whitespace changes you
can more easily see the relevant changes.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
MakeFile generation is once per module, so mark it as such.
also move the time stamp creation function inside as it's
only called from one place.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
1) Add a new file Common/caching.py
a. Allows for automated caching of repeated class functions, class
properties, and non-class functions
b. When called the first time the value is cached and if called a
second time, the cached result is called, not the function.
c. When used, this saves lots of memory since the actual function
pointers are replaced with smaller data elements.
d. note that not all features are used yet.
2) Fix AutoGen/GenMake and AutoGen/GetC to not call into private member
variables of ModuleAutoGen class
a. use the existing accessor properties for the data
3) Change AutoGen classes to remove a exception for duplicate members in
__new__ and use ?in? testing to speed up
4) Work on ModuleAutoGen class
a. Change all properties that use caching to use @caching_property
(see #1 above)
b. Change all properties that do not use caching to use standard python
decorator "@property"
c. Change all cases where a dictionary/set/list/object was created
and then immediately updated to use constructor parameters
d. Refactor each property function to remove the internal variable
that is no longer needed (this helps find items like #2 above)
e. Refactor _ApplyBuildRule with optional parameter to work around
circular dependency with BinaryFileList.
Note that 4e was almost certainly unintended as the functions were acting on
incomplete information since they were directly accessing private instance
variables at the same time another function on the stack was creating the same
private isntance data.
This overall changes behavior slightly, but makes the codebase smaller and
easier to read.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Per spec VOID* PCD max size should be a UINT16 value. so this patch
add the value check whether it is in range 0x0 .. 0xFFFF.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Allow the caller of the top-level makefile either to set EXTRA_LDFLAGS in
the environment or to pass EXTRA_LDFLAGS as a macro definition on the
command line. EXTRA_LDFLAGS extends (and potentially overrides) default
link-editing flags set in the makefiles.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1540244
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Allow the caller of the top-level makefile either to set EXTRA_OPTFLAGS in
the environment or to pass EXTRA_OPTFLAGS as a macro definition on the
command line. EXTRA_OPTFLAGS extends (and potentially overrides) default C
compilation flags set in the makefiles.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1540244
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The option "-O2" is not a preprocessor flag, but a code generation
(compilation) flag. Move it from BUILD_CPPFLAGS to BUILD_CFLAGS and
BUILD_CXXFLAGS.
Because "VfrCompile/GNUmakefile" uses "-O2" through BUILD_CPPFLAGS, and
because it doesn't use BUILD_CXXFLAGS, we have to introduce BUILD_OPTFLAGS
separately, so that "VfrCompile/GNUmakefile" can continue using just this
flag.
This patch doesn't change behavior.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1540244
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Option "-c" is a mode selection flag (choosing between compiling and
linking); it should not be in BUILD_CFLAGS, which applies only to
compiling anyway. The compilation rule for C source files, in
"footer.makefile", already includes "-c" -- currently we have double "-c"
options.
This patch doesn't change behavior.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1540244
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Replace the "old shell method" implementation in
ShellOpenFileByDevicePath() with EfiOpenFileByDevicePath() from UefiLib,
correcting the following issues:
- code duplication between this module and other modules,
- local variable name "EfiSimpleFileSystemProtocol" starting with "Efi"
prefix,
- bogus "FileHandle = NULL" assignments,
- leaking "Handle1" when the device path type/subtype check or the
realignment-motivated AllocateCopyPool() fails in the loop.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1008
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The ShellOpenFileByDevicePath() API promises to set the DeviceHandle
output parameter to the handle of the filesystem identified by the
FilePath input parameter. However, this doesn't actually happen when the
UEFI Shell 2.0 method is used (which is basically "always" nowadays).
Accordingly, the only caller of ShellOpenFileByDevicePath(), namely
ShellOpenFileByName(), defines a (dummy) local DeviceHandle variable just
so it can call ShellOpenFileByDevicePath().
Remove the useless output parameter.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1008
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Replace the OpenFileByDevicePath() function with EfiOpenFileByDevicePath()
from UefiLib, correcting the following issues:
- imprecise comments on OpenFileByDevicePath(),
- code duplication between this module and other modules,
- local variable name "EfiSimpleFileSystemProtocol" starting with "Efi"
prefix,
- bogus "FileHandle = NULL" assignments,
- leaking "Handle1" when the device path type/subtype check or the
realignment-motivated AllocateCopyPool() fails in the loop,
- stale SHELL_FILE_HANDLE reference in a comment.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Roman Bacik <roman.bacik@broadcom.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1008
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Replace the OpenFileByDevicePath() function with EfiOpenFileByDevicePath()
from UefiLib, correcting the following issues:
- imprecise comments on OpenFileByDevicePath(),
- code duplication between this module and other modules,
- local variable name "EfiSimpleFileSystemProtocol" starting with "Efi"
prefix,
- bogus "FileHandle = NULL" assignments,
- passing a potentially unaligned "FILEPATH_DEVICE_PATH.PathName" field to
a protocol member function (forbidden by the UEFI spec),
- leaking "Handle1" when the device path type/subtype check fails in the
loop,
- stale SHELL_FILE_HANDLE reference in a comment.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1008
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Replace the OpenFileByDevicePath() function with EfiOpenFileByDevicePath()
from UefiLib, correcting the following issues:
- imprecise comments on OpenFileByDevicePath(),
- code duplication between this module and other modules,
- local variable name "EfiSimpleFileSystemProtocol" starting with "Efi"
prefix,
- bogus "FileHandle = NULL" assignments,
- passing a potentially unaligned "FILEPATH_DEVICE_PATH.PathName" field to
a protocol member function (forbidden by the UEFI spec),
- leaking "Handle1" when the device path type/subtype check fails in the
loop,
- stale SHELL_FILE_HANDLE reference in a comment.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1008
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1080
Per Shell spec 2.2 chapter 3.4.4.2, Unicode file tag should be
inserted in the output from the input redirected variable, to ensure
it looks like a UCS-2 encode file.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
When "<a" is used to redirect ASCII file to an application, Shell
core reads the ASCII file and converts the ASCII to Unicode as the
input source of the application.
But per Shell spec, the input source should have \xFEFF to indicate
it's a Unicode stream.
The patch adds the missing \xFEFF.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
1) currently a couple classes use m instead of self (including some mixed
functions that should have previously failed).
2) deleted some blank lines.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
We met a case on GCC toolchain for increment build. the case is user
build Helloworld first, then rename the source file Helloworld.c to
Helloworld_new.c and also update the file name to Helloworld_new.c in
.inf file's [sources] section. finally, he rebuild it again.
It cause build failure due to multiple definition of `UefiMain' because
in the .lib file it both have Helloworld.obj and Helloworld_new.obj.
current we use the option 'cr' to create the .lib file while the 'r'
cmd means replace existing or insert new files into the archive. so
in this patch before we create the .lib file, we delete it first.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V2: Add back "from Common.DataType import *"
1. Remove some import statement that are not used.
2. Remove the Type value in the LibraryClassObject because we don't
actually use it.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Commit b22a62be5c
* IntelFrameworkModule/LegacyBios:Use reserved memory for legacy data
allocates reserved memory for holding legacy code/data.
But with PcdDxeNxMemoryProtectionPolicy set to certain value to
forbid execution when code is in certain type of memory, it's
possible that a platform forbids execution when code is in reserved
memory. The patch calls GCD service to allow such case otherwise
CPU exception may occur.
Code execution in BSCode area should be enabled by platform by
default.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jian Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=777
Per Shell spec, the environment variable has a case-sensitive name.
But today's implementation of EfiShellSetEnv() compares the
environment variable name case insensitively, which causes variable
like "CWD" cannot be set due to "cwd" is pre-defined variable.
The patch fixes this issue.
The EfiShellGetEnv() doesn't have such issue because it will
call into ShellFindEnvVarInList() which uses StrCmp().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jim Dailey <jim_dailey@dell.com>
1. Complete the full path for import statement. Use "EccMain" to
replace "Ecc" for the absolute path support.
2. Fix some issues on configuration file.
3. Fix an issue of RaiseError not working in EdkLogger.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
after analysis the BuildOptionValue function, we found the if statement
IsFieldValueAnArray is redundant because ValueExpressionEx will handle
it.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1082
Current code only returns actual data length in case of return status
buffer too small.
If caller provided a buffer that's large enough to restore data from
lock box, actual data length is not returned. It needs to be updated
in case of return status as success as well.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Anbazhagan Baraneedharan <anbazhagan@hp.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
V1 changes:
> Current code logic can't confirm CpuS3DataDxe driver start before
> CpuFeaturesDxe driver. So the assumption in CpuFeaturesDxe not valid.
> Add implementation for AllocateAcpiCpuData function to remove this
> assumption.
V2 changes:
> Because CpuS3Data memory will be copy to smram at SmmReadToLock point,
> so the memory type no need to be ACPI NVS type, also the address not
> limit to below 4G.
> This change remove the limit of ACPI NVS memory type and below 4G.
V3 changes:
> Remove function definition in header file.
> Add STATIC in function implementation.
Pass OS boot and resume from S3 test.
Bugz: https://bugzilla.tianocore.org/show_bug.cgi?id=959
Reported-by: Marvin Häuser <Marvin.Haeuser@outlook.com>
Suggested-by: Fan Jeff <vanjeff_919@hotmail.com>
Cc: Marvin Häuser <Marvin.Haeuser@outlook.com>
Cc: Fan Jeff <vanjeff_919@hotmail.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Because PrepareApStartupVector() stores StackAddress to
"mExchangeInfo->StackStart" (which has type (VOID*)), and because
"UefiCpuPkg/PiSmmCpuDxeSmm/X64/MpFuncs.nasm" reads the latter with:
add edi, StackStartAddressLocation
add rax, qword [edi]
mov rsp, rax
mov qword [edi], rax
in long-mode code. So code can remove below 4G limitation.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Because CpuS3Data memory will be copy to smram at SmmReadyToLock point,
the memory type no need to be ACPI NVS type, also the address not
limit to below 4G.
This change remove the limit of ACPI NVS memory type and below 4G.
Pass OS boot and resume from S3 test.
Cc: Marvin Häuser <Marvin.Haeuser@outlook.com>
Cc: Fan Jeff <vanjeff_919@hotmail.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
ACPI_CPU_DATA structure first introduced to save data in
normal boot phase. Also this data will be used in S3 phase
by one PEI driver. So in first phase, this data is been
defined to use ACPI NVS memory type and must below 4G.
Later in order to fix potential security issue,
PiSmmCpuDxeSmm driver added logic to copy ACPI_CPU_DATA
(except ResetVector and Stack buffer) to smram at smm
ready to lock point. ResetVector must below 1M and Stack
buffer is write only in S3 phase, so these two fields not
copy to smram. Also PiSmmCpuDxeSmm driver owned the task
to restore the CPU setting and it's a SMM driver.
After above change, the acpi nvs memory type and below 4G
limitation is no longer needed.
This change remove the limitation in the comments for
ACPI_CPU_DATA definition.
Cc: Marvin Häuser <Marvin.Haeuser@outlook.com>
Cc: Fan Jeff <vanjeff_919@hotmail.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Current implementation will copy GDT/IDT at SmmReadyToLock point
from ACPI NVS memory to Smram. Later at S3 resume phase, it restore
the memory saved in Smram to ACPI NVS. It can directly use GDT/IDT
saved in Smram instead of restore the original ACPI NVS memory.
This patch do this change.
Test Done:
Do the OS boot and S3 resume test.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
the call statement of _CheckDuplicateInFV() was commented out
in 2014. There is no call statement of _CheckDuplicateInFV(),
so remove it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When packing HiiPcd into PcdNvStoreDefaultValueBuffer,
The boolean type pcd value packing incorrect.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Kelly Steele <kelly.steele@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Kelly Steele <kelly.steele@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Kelly Steele <kelly.steele@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Kelly Steele <kelly.steele@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Prince Agyeman <prince.agyeman@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Ma, Maurice <maurice.ma@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Prince Agyeman <prince.agyeman@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Ma, Maurice <maurice.ma@intel.com>
Merge [Sources.Ia32, Sources.X64] to [Sources] after removing IPF. Also
change other similar parts in this file.
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Use GenerateCapsule to generate capsules for MinnowMax
debug and release builds and sample devices.
Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Guo Mang <mang.guo@intel.com>
This patch adds maintainers for the FmpDevicePkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Current code locks variables in PcdFmpDeviceLockEventGuid callback by
VariableLock protocol whose interface will be closed at EndOfDxe.
So the PcdFmpDeviceLockEventGuid callback needs be executed before
the EndOfDxe callback in Variable driver.
When PcdFmpDeviceLockEventGuid = gEfiEndOfDxeEventGroupGuid, the
callback's execution sequence depends on the callback's TPL and
registration sequence.
When PcdFmpDeviceLockEventGuid = gEfiEventReadyToBootGuid, the
PcdFmpDeviceLockEventGuid callback will be executed after the
EndOfDxe callback in Variable driver, the locking will fail.
The patch moves the variables locking logic to entrypoint.
The patch also moves the IsLockFmpDeviceAtLockEventGuidRequired ()
checking to entrypoint.
The entrypoint's final return status should be better to depend on
the return status of RegisterFmpInstaller/InstallFmpInstance, but not
gBS->CreateEventEx.
So the patch also moves the RegisterFmpInstaller/InstallFmpInstance
calling to the end of entrypoint.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Current code just creates ESRT entry in FMP notification
and installs ESRT configuration table in ReadyToBoot event.
The LastAttemptVersion and LastAttemptStatus in ESRT will
be out of date after system continues to boot without reset
after capsule update (reset is not required or capsule update
is failed).
This patches updates the code to create ESRT based on all
FMP instances in ReadyToBoot event.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
No need repopulate if SetImage is not called.
But need repopulate after SetImage is called to update
LastAttemptVersion and LastAttemptStatus
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
For non-root folder, such as "X:\test", the EDK_TOOLS_PATH will
resolve to "X:\test\edk2\BaseTools". This is OK.
But if WORKSPACE is at a root folder, such as "X:\", the EDK_TOOLS_PATH
will look like "X:\\BaseTools". The *double backslash* can fail the command
like "del" and thus affect the %ERRORLEVEL% variable, which may break
subsequent build processing.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The DXE Core is one of those modules that call
ProcessLibraryConstructorList() manually.
Before DxeMain() [MdeModulePkg/Core/Dxe/DxeMain/DxeMain.c] calls
ProcessLibraryConstructorList(), and through it, our
PlatformDebugLibIoPortConstructor() function, DxeMain() invokes the
DEBUG() macro multiple times. That macro lands in our
PlatformDebugLibIoPortFound() function -- which currently relies on the
"mDebugIoPortFound" global variable that has (not yet) been set by the
constructor. As a result, early debug messages from the DXE Core are lost.
Move the device detection into PlatformDebugLibIoPortFound(), also caching
the fact (not just the result) of the device detection.
(We could introduce a separate DebugLib instance just for the DXE Core,
but the above approach works for all modules that currently consume the
PlatformDebugLibIoPort instance (which means "everything but SEC").)
This restores messages such as:
> CoreInitializeMemoryServices:
> BaseAddress - 0x7AF21000 Length - 0x3CDE000 MinimalMemorySizeNeeded - 0x10F4000
Keep the empty constructor function -- OVMF's DebugLib instances have
always had constructors; we had better not upset constructor dependency
ordering by making our instance(s) constructor-less.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: c09d957130
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: sanitize blank lines around "mDebugIoPortChecked"]
DxeSmmPerformanceLib previously is used by DP tool.
But in new pweformance infrastructure, we have updated
Dp tool to get the performance data from firmware
performance data table in ACPI.
Now the DxeSmmPerformanceLib is not used by
any module. So remove it from edk2 code base to
avoid being used by mistake.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
DxeSmmPerformanceLib previously is used by DP tool.
But in new pweformance infrastructure, we have updated
Dp tool to get the performance data from firmware
performance data table in ACPI.
So remove the usage of DxeSmmPerformanceLib here.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
DxeSmmPerformanceLib previously is used by DP tool.
But in new pweformance infrastructure, we have updated
Dp tool to get the performance data from firmware
performance data table in ACPI.
So remove the usage of DxeSmmPerformanceLib here.
Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>
DxeSmmPerformanceLib previously is used by DP tool.
But in new pweformance infrastructure, we have updated
Dp tool to get the performance data from firmware
performance data table in ACPI.
So remove the usage of DxeSmmPerformanceLib here.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Kelly Steele <kelly.steele@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This commit adds an addtional check in AsciiStriCmp. It
explicitly checks the end of the sting pointed by 'SecondString' to make
the code logic easier for reading and to prevent possible mis-reports by
static code checkers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <Hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1073
Add PCD statement include files for the PKCS7 test key.
* gEfiSecurityPkgTokenSpaceGuid.PcdPkcs7CertBuffer
* gFmpDevicePkgTokenSpaceGuid.PcdFmpDevicePkcs7CertBufferXdr
These include files can be used in !include statements in PCD
sections of a platform DSC file to assign these PCDs to the
test key certificate values.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
According to the SBSA specification the Watchdog Compare
Register is split into two separate 32bit registers.
EDK2 code uses a single 64bit transaction to update
them, which can be problematic, depending on the SoC
implementation and could result in unpredictable behavior.
Fix this by modifying WatchdogWriteCompareRegister routine to
use two consecutive 32bit writes to the Watchdog Compare Register
Low and High, using new dedicated macros.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In DSC, we can define the driver with the different FILE GUID. So this
driver name and its FILE GUID should also be listed in Build output
Guid.xref. But now, Guid.xref still lists the driver MODULE_GUID.
The case in Platform.dsc:
MdeModulePkg/Universal/DriverSampleDxe/DriverSampleDxe.inf {
<Defines>
FILE_GUID = 3A4A354F-6935-40fa-B19C-500EEEBF0BC2
<LibraryClasses>
PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
}
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
*v2: Optimize the patch by calculating AsciiStrSize() only once.
In URI, the colon (:) is used to terminate the HostName path before
a port number. However, if HostName is expressed as IPv6 format, colon
characters in IPv6 addresses will conflict with the colon before port
number. To alleviate this conflict in URI, the IPv6 expressed HostName
are enclosed in square brackets ([]). To record the real IPv6 HostName,
square brackets should be stripped.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Some static tool reports "the condition in 'if' statement is constant".
This patch updates the code to use local variable to store test key
digest size. It can pass the static tool's check.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Some static tool reports "DeviceLibLowestSupportedVersion" is used,
but is uninitialized. It is false positive reporting based because
DeviceLibLowestSupportedVersion will have assigned value after
FmpDeviceGetLowestSupportedVersion() returns SUCCESS.
This patch updates the code to initialize
DeviceLibLowestSupportedVersion
to DEFAULT_LOWESTSUPPORTEDVERSION before calling
FmpDeviceGetLowestSupportedVersion().
It can pass the static tool's check.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Instead of EFI_ACCESS_DENIED which is not defined in retval by
UEFI spec, return UNSUPPORTED if device has been locked in
SetTheImage().
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
It does not make sense to check the Image/ImageSize if ImageIndex
has been invalid.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
FmpDxe does not consume DisplayUpdateProgressLib, so remove the
mapping in FmpDevicePkg.dsc.
Also rename the ESRT GUIDs.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Add DISABLE_NEW_DEPRECATED_INTERFACES build options to make sure
no deprecated interface used in this package.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Current code return 1 when LSV check is not required,
but 1 LSV will make 0 Version capsule image update failed.
0 LSV is valid, this patch updates the code to return 0 when
LSV check is not required
We can see even the DEFAULT_LOWESTSUPPORTEDVERSION is 0.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=922
Based on content from the following branch:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport/MsCapsuleUpdatePkg
The FmpDxe directory contains 2 INF files. FmpDxe.inf
is a DXE driver that is used in a platform to add a
Firmware Management Protocol for firmware device that
supports firmware updates.
FmpDxeLib.inf is a NULL library instance with the exact
same functionality as FmpDxe.inf, but allows the the
Firmware Management Protocol feature to be added to
an existing device driver.
The FmpDxe component is intended to be used "as is"
with no need for any device specific or platform specific
changes.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=922
Based on content from the following branch:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport/MsCapsuleUpdatePkg
Add library instances for FmpDeviceLib, CapsuleUpdatePolicyLib,
and FmpPayloadHeaderLib.
Library Classes
===============
* FmpDeviceLibNull - Non-functional template of the FmpDeviceLib
that can be used as a starting point for an FmpDeviceLib for
a specific firmware storage device.
* CapsuleUpdatePolicyLibNull - Functional template of the
CapsuleUpdatePolicyLib that can be used as a starting point
of a platform specific implementation.
* FmpPayloadHeaderLibV1 - Version 1 of the FmpPayloadHeaderLib.
This library is indented to be used "as is" with no need for
any device specific or platform specific changes.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=922
Based on content from the following branch:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport/MsCapsuleUpdatePkg
Create FmpDevicePkg with library classes and PCDs used to
customize the behavior of a Firmware Management Protocol
instance.
Library Classes
===============
* FmpDeviceLib - Provides firmware device specific services
to support updates of a firmware image stored in a firmware
device.
* CapsuleUpdatePolicyLib - Provides platform policy services
used during a capsule update.
* FmpPayloadHeaderLib - Provides services to retrieve values
from a capsule's FMP Payload Header. The structure is not
included in the library class. Instead, services are
provided to retrieve information from the FMP Payload Header.
If information is added to the FMP Payload Header, then new
services may be added to this library class to retrieve the
new information.
PCDs set per module
====================
* PcdFmpDeviceSystemResetRequired - Indicates if a full
system reset is required before a firmware update to a
firmware devices takes effect
* PcdFmpDeviceTestKeySha256Digest - The SHA-256 hash of a
PKCS7 test key that is used to detect if a test key is
being used to authenticate capsules. Test key detection
is disabled by setting the value to {0}.
* PcdFmpDeviceProgressColor - The color of the progress bar
during a firmware update.
* PcdFmpDeviceImageIdName - The Null-terminated Unicode
string used to fill in the ImageIdName field of the
EFI_FIRMWARE_IMAGE_DESCRIPTOR structure that is returned
by the GetImageInfo() service of the Firmware Management
Protocol for the firmware device.
* PcdFmpDeviceBuildTimeLowestSupportedVersion - The build
time value used to fill in the LowestSupportedVersion field
of the EFI_FIRMWARE_IMAGE_DESCRIPTOR structure that is
returned by the GetImageInfo() service of the Firmware
Management Protocol.
* PcdFmpDeviceProgressWatchdogTimeInSeconds - The time in
seconds to arm a watchdog timer during the update of a
firmware device.
PCDs set per module or for entire platform
==========================================
* PcdFmpDevicePkcs7CertBufferXdr - One or more PKCS7
certificates used to verify a firmware device capsule
update image.
* PcdFmpDeviceLockEventGuid - An event GUID that locks
the firmware device when the event is signaled.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=945
Based on content from the following branch
https://github.com/Microsoft/MS_UEFI/tree/share/beta/CapsuleTools
* Convert C tools to Python
* Add common python modules to:
BaseTools/Source/Python/Common/Uefi/Capsule
BaseTools/Source/Python/Common/Edk2/Capsule
* Add GenerateCapsule.py to BaseTools/Source/Python/Capsule
* Add Windows and Posix wrappers for GenerateCapsule.py
usage: GenerateCapsule [-h] [-o OUTPUTFILE] (-e | -d | --dump-info)
[--capflag {PersistAcrossReset,PopulateSystemTable,InitiateReset}]
[--capoemflag CAPSULEOEMFLAG] [--guid GUID]
[--hardware-instance HARDWAREINSTANCE]
[--monotonic-count MONOTONICCOUNT]
[--fw-version FWVERSION] [--lsv LOWESTSUPPORTEDVERSION]
[--pfx-file SIGNTOOLPFXFILE]
[--signer-private-cert OPENSSLSIGNERPRIVATECERTFILE]
[--other-public-cert OPENSSLOTHERPUBLICCERTFILE]
[--trusted-public-cert OPENSSLTRUSTEDPUBLICCERTFILE]
[--signing-tool-path SIGNINGTOOLPATH] [--version] [-v]
[-q] [--debug [0-9]]
InputFile
Generate a capsule. Copyright (c) 2018, Intel Corporation. All rights
reserved.
positional arguments:
InputFile Input binary payload filename.
optional arguments:
-h, --help show this help message and exit
-o OUTPUTFILE, --output OUTPUTFILE
Output filename.
-e, --encode Encode file
-d, --decode Decode file
--dump-info Display FMP Payload Header information
--capflag {PersistAcrossReset,PopulateSystemTable,InitiateReset}
Capsule flag can be PersistAcrossReset, or
PopulateSystemTable or InitiateReset or not set
--capoemflag CAPSULEOEMFLAG
Capsule OEM Flag is an integer between 0x0000 and
0xffff.
--guid GUID The FMP/ESRT GUID in registry format. Required for
encode operations.
--hardware-instance HARDWAREINSTANCE
The 64-bit hardware instance. The default is
0x0000000000000000
--monotonic-count MONOTONICCOUNT
64-bit monotonic count value in header. Default is
0x0000000000000000.
--fw-version FWVERSION
The 32-bit version of the binary payload (e.g.
0x11223344 or 5678).
--lsv LOWESTSUPPORTEDVERSION
The 32-bit lowest supported version of the binary
payload (e.g. 0x11223344 or 5678).
--pfx-file SIGNTOOLPFXFILE
signtool PFX certificate filename.
--signer-private-cert OPENSSLSIGNERPRIVATECERTFILE
OpenSSL signer private certificate filename.
--other-public-cert OPENSSLOTHERPUBLICCERTFILE
OpenSSL other public certificate filename.
--trusted-public-cert OPENSSLTRUSTEDPUBLICCERTFILE
OpenSSL trusted public certificate filename.
--signing-tool-path SIGNINGTOOLPATH
Path to signtool or OpenSSL tool. Optional if path to
tools are already in PATH.
--version show program's version number and exit
-v, --verbose Turn on verbose output with informational messages
printed, including capsule headers and warning
messages.
-q, --quiet Disable all messages except fatal errors.
--debug [0-9] Set debug level
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
This is initial version of OP-TEE library that provides api's to
communicate with OP-TEE OS (Trusted OS based on ARM TrustZone) via
secure monitor calls. Currently it provides basic api to detect OP-TEE
presence via UID matching.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Current DxeCapsuleLibFmp always do reset for FMP capsule.
Actually, the code should use Attributes from FMP descriptor to know
whether reset is required or not.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Within function GetUefiMemoryAttributesTable(), add a check to avoid
possible null pointer dereference.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Within function SmmMemLibInternalGetUefiMemoryAttributesTable(), add a
check to avoid possible null pointer dereference.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Error is caused by SHA384/SHA512 hash lib change in.
Cc: Bi Dandan <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhang, Chao B <chao.b.zhang@intel.com>
Reviewed-by: Bi Dandan <dandan.bi@intel.com>
Add SHA384, 512 Hash lib support. Now only CryptoPkg support PEI/DXE
version.
Cc: Long Qin <qin.long@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhang Chao B <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
The build failure is like below.
xxx\CapsuleApp.c(868) : error C2275: 'EFI_GUID' :
illegal use of this type as an expression
xxx/UefiBaseType.h(29) : see declaration of 'EFI_GUID'
xxx\CapsuleApp.c(868) : error C2146: syntax error :
missing ';' before identifier 'ImageTypeId'
xxx\CapsuleApp.c(868) : error C2065: 'ImageTypeId' : undeclared identifier
xxx\CapsuleApp.c(869) : error C2275: 'UINTN' :
illegal use of this type as an expression
xxx\ProcessorBind.h(224) : see declaration of 'UINTN'
xxx\CapsuleApp.c(869) : error C2146: syntax error :
missing ';' before identifier 'ImageIndex'
xxx\CapsuleApp.c(869) : error C2065: 'ImageIndex' : undeclared identifier
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
The code to check FmpImageSize again OFFSET_OF
(EFI_FIRMWARE_MANAGEMENT_CAPSULE_IMAGE_HEADER, UpdateHardwareInstance)
can be refined to check against FmpImageHeaderSize.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Commit d1de487dd2
"MdeModulePkg/BdsDxe: fall back to a Boot Manager Menu loop before
hanging"
changed BDS core to fall back to UI loop when no bootable option
can be launched.
Now since PlatformBootManagerUnableToBoot() is added, the commit
can be reverted.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The patch adds a new API PlatformBootManagerUnableToBoot()
to PlatformBootManagerLib.
The new API is provided by platform bds library and is called when
no boot option could be launched.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
When cleaning the PciIoDevice, also free the BusNumberRange
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
FvSimpleFileSystem on read always allocates a FileBuffer, and never frees
it. This causes memory leaks. It is especially bad for reading scripts
line-by-line. In some cases memory leak can exceed 1GB.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Vladimir Olovyannikiov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
We want to provide precise info in MemAttribTable
to both OS and SMM, and SMM only gets the info at EndOfDxe.
So we do not update RtCode entry in EndOfDxe.
The impact is that if 3rd part OPROM is runtime, it cannot be executed
at UEFI runtime phase.
Currently, we do not see compatibility issue, because the only runtime
OPROM we found before in UNDI, and UEFI OS will not use UNDI interface
in OS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
It treats the UEFI runtime page with EFI_MEMORY_RO attribute as
invalid SMM communication buffer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
It treats the UEFI runtime page with EFI_MEMORY_RO attribute as
invalid SMM communication buffer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
So that the SMM can consume it to set page protection for
the UEFI runtime page with EFI_MEMORY_RO attribute.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
It treats GCD untested memory as invalid SMM
communication buffer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
It treats GCD untested memory as invalid SMM
communication buffer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Base on UEFI spec requirement, StartAllAPs function should not use the APs which has been disabled before. This patch just change current code to follow this rule.
V3 changes:
Only called by StartUpAllAps, WakeUpAp will not wake up the disabled APs, in other cases also need to include the disabled APs, such as CpuDxe driver start up and ChangeApLoopCallback function.
WakeUpAP() is called with (Broadcast && WakeUpDisabledAps) from MpInitLibInitialize(), CollectProcessorCount() and MpInitChangeApLoopCallback() only. The first two run before the PPI or Protocol user has a chance to disable any APs. The last one runs in response to the ExitBootServices and LegacyBoot events, after which the MP protocol is unusable. For this reason, it doesn't matter that an originally disabled AP's state is not restored to Disabled, when
WakeUpAP() is called with (Broadcast && WakeUpDisabledAps).
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
The patch includes below changes:
(1) It removes "volatile" from RunningCount, because only the BSP modifies it.
(2) When we detect a timeout in CheckAllAPs(), and collect the list of failed CPUs, the size of the list is derived from the following difference, before the patch:
StartCount - FinishedCount
where "StartCount" is set by the BSP at startup, and FinishedCount is incremented by the APs themselves.
Here the patch replaces this difference with
StartCount - RunningCount
that is, the difference is no more calculated from the BSP's startup counter and the AP's shared finish counter, but from the RunningCount measurement that the BSP does itself, in CheckAllAPs().
(3) Finally, the patch changes the meaning of RunningCount. Before the patch, we have:
- StartCount: the number of APs the BSP stars up,
- RunningCount: the number of finished APs that the BSP collected
After the patch, StartCount is removed, and RunningCount is *redefined* as the following difference:
OLD_StartCount - OLD_RunningCount
Giving the number of APs that the BSP started up but hasn't collected yet.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Current CPU state definition include CpuStateIdle and CpuStateFinished.
After investigation, current code can use CpuStateIdle to replace the
CpuStateFinished. It will reduce the state number and easy for maintenance.
> Before this patch, the state transitions for an AP are:
>
> Idle ----> Ready ----> Busy ----> Finished ----> Idle
> [BSP] [AP] [AP] [BSP]
>
> After the patch, the state transitions for an AP are:
>
> Idle ----> Ready ----> Busy ----> Idle
> [BSP] [AP] [AP]
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Currently DP tool will cumulate the performance data for
Driver Binding Support/Start, will count the number they
appears, and record the maximum/minimum time value...
Now add Driver Binding Stop performance data to the
cumulative data to keep consistency.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
1. Add a checkpoint to check NO TABs.
2. Add a checkpoint to check line ending with CRLF.
3. Add a checkpoint to check no trailing spaces.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
This patch adds UefiShellAcpiViewCommandLib INF file into
[Components] section of ShellPkg.dsc so this library can be built
in ShellPkg level build.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Here is this script usage.
1. Build one platform.
2. Use FCE tool to read HII config from the generated FD image.
FCE read -i Platform.fd > Config.txt
3. Call the script to generate StructurePcd setting.
ConvertFceToStructurePcd.py -p Build\PlatformPkg\DEBUG_VS2015x86 \
-c Config.txt -o OutputDir
OutputDir directory has StructurePcd.dec, StructurePcd.dsc, StructurePcd.inf.
4. Refer to wiki https://github.com/lgao4/edk2/wiki/StructurePcd-Enable-Steps
to enable structure pcd in this platform.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
This variable is only used in one function, make it local there.
Also when iterating on the variable, use dict.items() to get value
instead of re-looking up the value multiple times.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
The class name for the "PeiResourcePublicationLib" instance is just
"ResourcePublicationLib", not "PeiResourcePublicationLib". However, no
module included in the ArmVirtPkg platforms depends on this lib class;
remove its resolution.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
ResourcePublicationLib class name is ResourcePublicationLib.
INF and DSC files are updated to use the correct one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Dongao Guo <dongao.guo@intel.com>
[lersek@redhat.com: insert empty line between commit msg body and tags]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
If the different token with the same PCD names are used in the driver,
build can pass. If the different token with the same PCD name are used
in the different library, then the driver build will fail. The reason
is that the driver autogen.c is not generated correctly for the second
case. BaseTools should check the duplicated PCD name is the driver and
its linked libraries.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
current if user use PatchPcdSetPtr in library, it will report the
_PCD_PATCHABLE_TokenName_SIZE is not defined.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Currently, the SecPlatformInformation2 PPI is installed when either
there is none present or the present one doesn't lack data.
Update the logic to only install the SecPlatformInformation2 PPI when
it's not already installed so that an up-to-date PPI remains the only
one and unchanged.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
This patch corrects the Module Type Header file for Management Mode(MM)
as specified in PI v1.6 Specification. Also, it updates parameter for
auto generated template functions from EFI_SMM_SYSTEM_TABLE2 to
EFI_MM_SYSTEM_TABLE.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
According to UEFI spec, only bits 0-15 of CapsuleFlags are
meaningful and CapsuleGuid specific, CAPSULE_FLAGS_PERSIST_ACROSS_RESET
CAPSULE_FLAGS_POPULATE_SYSTEM_TABLE/CAPSULE_FLAGS_INITIATE_RESET
defined in UEFI spec are in bits 16-31, they should not be parsed in
CapsuleFlags of ESRT.
CapsuleFlags
The capsule flags field contains the CapsuleGuid flags (bits 0-15)
as defined in the EFI_CAPSULE_HEADER that will be set in the capsule
header.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
V3: Add some invalid type and datum check
V2: limit the PCD used in the [Depex] section should be used in the module
The PCD item used in INF [Depex] section must be defined as FixedAtBuild
type and VOID* datum type, and the size of the PCD must be 16 bytes.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=443
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
This patch adds a simple CPU driver that exports the
EFI_MM_CONFIGURATION_PROTOCOL to allow registration of the Standalone
MM Foundation entry point. It preserves the existing notification
mechanism for the configuration protocol.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
The Standalone MM environment runs in S-EL0 in AArch64 on ARM Standard
Platforms and is initialised during the SEC phase. ARM Trusted firmware
in EL3 is responsible for initialising the architectural context for
S-EL0 and loading the Standalone MM image. The memory allocated to this
image is marked as RO+X. Heap memory is marked as RW+XN.
Certain actions have to be completed prior to executing the generic code
in the Standalone MM Core module. These are:
1. Memory permission attributes for each section of the Standalone MM
Core module need to be changed prior to accessing any RW data.
2. A Hob list has to be created with information that allows the MM
environment to initialise and dispatch drivers.
Furthermore, this module is responsible for handing over runtime MM
events to the Standalone MM CPU driver and returning control to ARM
Trusted Firmware upon event completion. Hence it needs to know the CPU
driver entry point.
This patch implements an entry point module that ARM Trusted Firmware
jumps to in S-EL0. It then performs the above actions before calling the
Standalone MM Foundation entry point and handling subsequent MM events.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Management Mode (MM) is a generic term used to describe a secure
execution environment provided by the CPU and related silicon that is
entered when the CPU detects a MMI. For x86 systems, this can be
implemented with System Management Mode (SMM). For ARM systems, this can
be implemented with TrustZone (TZ).
A MMI can be a CPU instruction or interrupt. Upon detection of a MMI, a
CPU will jump to the MM Entry Point and save some portion of its state
(the "save state") such that execution can be resumed.
The MMI can be generated synchronously by software or asynchronously by
a hardware event. Each MMI source can be detected, cleared and disabled.
Some systems provide for special memory (Management Mode RAM or MMRAM)
which is set aside for software running in MM. Usually the MMRAM is
hidden during normal CPU execution, but this is not required. Usually,
after MMRAM is hidden it cannot be exposed until the next system reset.
The MM Core Interface Specification describes three pieces of the PI
Management Mode architecture:
1. MM Dispatch
During DXE, the DXE Foundation works with the MM Foundation to
schedule MM drivers for execution in the discovered firmware volumes.
2. MM Initialization
MM related code opens MMRAM, creates the MMRAM memory map, and
launches the MM Foundation, which provides the necessary services to
launch MM-related drivers. Then, sometime before boot, MMRAM is
closed and locked. This piece may be completed during the
SEC, PEI or DXE phases.
3. MMI Management
When an MMI generated, the MM environment is created and then the MMI
sources are detected and MMI handlers called.
This patch implements the MM Core.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The Standalone MM environment is initialized during the SEC phase on ARM
Standard Platforms. The MM Core driver implements an entry point module
which is architecture specific and runs prior to the generic core driver
code. The former creates a Hob list that the latter consumes. This
happens in the same phase.
This patch implements a Hob library that can be used by the entry point
module to produce a Hob list and by the core driver code to consume it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
MM memory check library library implementation. This library consumes
MM_ACCESS_PROTOCOL to get MMRAM information. In order to use this
library instance, the platform should produce all MMRAM range via
MM_ACCESS_PROTOCOL, including the range for firmware (like MM Core
and MM driver) and/or specific dedicated hardware.
This patch provides services for MM Memory Operation.
The management mode Mem Library provides function for checking if buffer
is outside MMRAM and valid. It also provides functions for copy data
from MMRAM to non-MMRAM, from non-MMRAM to MMRAM,
from non-MMRAM to non-MMRAM, or set data in non-MMRAM.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
This patch implements a firmware volume library that can be used by the
Standalone management mode core module to parse the firmware volume.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
This patch deletes "StandaloneMmPkg" which was created as a file
intially. This patch enables creation of "StandaloneMmPkg" as a folder.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Current IsInSmm() method makes use of gEfiSmmBase2ProtocolGuid.InSmm() to
check if current processor is in SMM mode or not. But this is not correct
because gEfiSmmBase2ProtocolGuid.InSmm() can only detect if the caller is
running in SMRAM or from SMM driver. It cannot guarantee if the caller is
running in SMM mode. Because SMM mode will load its own page table, adding
an extra check of saved DXE page table base address against current CR3
register value can help to get the correct answer for sure (in SMM mode or
not in SMM mode).
There's indiscriminate uses of Context.X64 and Context.Ia32 in code which
is not a good coding practice and will cause potential issue. In addition,
the related structure type definition is not packed and has also potential
issue. This will not be covered by this patch but be tracked by a bug below.
https://bugzilla.tianocore.org/show_bug.cgi?id=1039
This is an issue caused by check-in at
2a1408d1d7
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Current function has low performance because it calls GetApicId
in the loop, so it maybe called more than once.
New logic call GetApicId once and base on this value to search
the processor.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jeff Fan <vanjeff_919@hotmail.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
None of the source files referenced by "AcpiPlatformDxe.inf" #include
"MdePkg/Include/Library/DxeServicesLib.h" or use interfaces declared
therein, so drop DxeServicesLib from [LibraryClasses].
"AcpiPlatformDxe.inf" references "AcpiPlatform.c", which installs ACPI
tables built into the firmware image from under "OvmfPkg/AcpiTables/", in
case dynamically generated ACPI tables are not available from Xen or QEMU.
For this, the driver consumes gEfiFirmwareVolume2ProtocolGuid. Account for
that in [Protocols].
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reported-by: Steven Shi <steven.shi@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1014
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
When resume from S3 and CPU loop mode is MWait mode,
if driver calls APs to do task at EndOfPei point, the
APs can't been wake up and bios hang at that point.
The root cause is PiSmmCpuDxeSmm driver wakes up APs
with HLT mode during S3 resume phase to do SMM relocation.
After this task, PiSmmCpuDxeSmm driver not restore APs
context which make CpuMpPei driver saved wake up buffer
not works.
The solution for this issue is let CpuMpPei driver hook
S3SmmInitDone ppi notification. In this notify function,
it check whether Cpu Loop mode is not HLT mode. If yes,
CpuMpPei driver will set a flag to force BSP use INIT-SIPI
-SIPI command to wake up the APs.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Search uCode costs much time, if AP has same processor type
with BSP, AP can use BSP saved uCode info to get better performance.
This change enables this solution.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Read uCode from memory has better performance than from flash.
But it needs extra effort to let BSP copy uCode from flash to
memory. Also BSP already enable cache in SEC phase, so it use
less time to relocate uCode from flash to memory. After
verification, if system has more than one processor, it will
reduce some time if load uCode from memory.
This change enable this optimization.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The case is the Pcd item both used in 1 module inf and 1 lib inf, and
in the DSC component section, it override the Pcd value.
In the module, the pcd value is the override value, but in the lib inf
the pcd value is the value that in the DSC PCD section's value, then it
cause the Pcd value is different in the module and lib. but actually we
only need use the Pcd value in the module to decide whether it use the
same value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Since Ecc.py import modules from its own directory, add "-m" to the
python parameters so that they can import its own modules after adopting
absolute import.
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Since BPDG.py import modules from its own directory, add "-m" to the
python parameters so that they can import its own modules after adopting
absolute import.
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Move "ImageBinDict" from GenFds.py to GenFdsGlobalVariable.py so that we
can remove the requirement to import GenFds.GenFds in Capsule.py, Fd.py and
Fv.py. This breaks the following circular imports:
* GenFds.FdfParser => GenFds.Capsule => GenFds.GenFds => GenFds.FdfParser
* GenFds.FdfParser => GenFds.Fd => GenFds.GenFds => GenFds.FdfParser
* GenFds.FdfParser => GenFds.Fd => GenFds.Fv => GenFds.GenFds =>
GenFds.FdfParser
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Since GenFds.py import modules from its own directory, add "-m" to the
python parameters so that they can import its own modules after adopting
absolute import.
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Add the IPv6 stack to ArmVirtQemu with a cumulative port of the following
OvmfPkg commits:
* 36c6413f76 "OvmfPkg: enable the IPv6 support", 2014-12-19
* 96302b80d9 "OvmfPkg: Enable Network2 Shell Commands for IPv6",
2016-03-08
* 6d0f8941bd "OvmfPkg: always resolve OpenSslLib, IntrinsicLib and
BaseCryptLib", 2017-01-17
* 32e22f20c9 "OvmfPkg: correct the IScsiDxe module included for the IPv6
stack", 2017-01-17
The IPv6-enabled IScsiDxe driver depends on BaseCryptLib, and the
"CryptoPkg/Library/BaseCryptLib/BaseCryptLib.inf" instance depends on
IntrinsicLib and OpensslLib. This is why commit 6d0f8941bd is relevant.
However, unlike in OvmfPkg, in ArmVirtPkg we'll precisely track the
firmware features that require these library classes. (The OvmfPkg
discussion was quite complex, and the OvmfPkg solution was a compromise:
<http://mid.mail-archive.com/1484569332-13440-1-git-send-email-jiaxin.wu@intel.com>.)
The ArmVirtXen platform is not extended with the relevant drivers because
currently it doesn't include any networking support.
Cc: Julien Grall <julien.grall@linaro.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1007
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This patch is to fix the incorrect cache key of
skip ModuleAutoGen cache.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Today's MpInitLib PEI implementation directly calls
PeiServices->GetHobList() from AP which may cause racing issue.
This patch fixes this issue by duplicating IDT for APs.
Because CpuMpData structure is stored just after IDT, the CpuMPData
address equals to IDTR.BASE + IDTR.LIMIT + 1.
v2:
1. Add ALIGN_VALUE() on BufferSize.
2. Add ASSERT() to make sure no memory usage outside of the allocated buffer.
3. Add more comments in InitConfig path when restoring CpuData[0].VolatileRegisters.
Cc: Jeff Fan <vanjeff_919@hotmail.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Fish Andrew <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
*v2: Resolve the conflict commit.
*v3: Fixed the failure if BodyLength in HTTP token is less than the received
size of HTTPS message.
HttpBodyParserCallback function is to parse the HTTP(S) message body so as to
confirm whether there is the next message header. But it doesn't record the
parsing message data/length correctly.
This patch is refine the parsing logic so as to fix the potential failure.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Gary Lin <glin@suse.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Tested-by: Gary Lin <glin@suse.com>
Adds support for the following X64 ELF relocations to GenFw
R_X86_64_GOTPCREL
R_X86_64_GOTPCRELX
R_X86_64_REX_GOTPCRELX
Background:
The GCC49 and GCC5 toolchains use the small pie model for X64. In the
small pie model, gcc emits a GOTPCREL relocation whenever C code takes
the address of a global function. The emission of GOTPCREL is mitigated
by several factors
1. In GCC49, all global symbols are declared hidden thereby eliminating
the emission of GOTPCREL.
2. In GCC5, LTO is used. In LTO, the complier first creates intermediate
representation (IR) files. During the static link stage, the LTO compiler
combines all IR files as a single compilation unit, using linker symbol
assistance to generate code. Any global symbols defined in the IR that
are not referenced from outside the IR are converted to local symbols -
thereby eliminating the emission of GOTPCREL for them.
3. The linker (binutils ld) further transforms any GOTPCREL used with
the movq opcode to a direct rip-relative relocation used with the leaq
opcode. This linker optimization can be disabled with the option
-Wl,--no-relax. Furthermore, gcc is able to emit GOTPCREL with other
opcodes
- pushq opcode for passing arguments to functions.
- addq/subq opcodes for pointer arithmetic.
These other opcode uses are not transformed by the linker.
Ultimately, in GCC5 there are some emissions of GOTPCREL that survive
all these mitigations - if C code takes the address of a global function
defined in assembly code - and performs pointer arithmetic on the
address - then the GOTPCREL remains in the final linker product.
A GOTPCREL relocation today causes the build to stop since GenFw does
not handle them. It is possible to eliminate any remaining GOTPCREL
emissions by manually declaring the global symbols causing them to have
hidden visibility. This patch is offered instead to allow GenFw to
handle any residual GOTPCREL.
Cc: Shi Steven <steven.shi@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zenith432 <zenith432@users.sourceforge.net>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When user input error password exceed the max allowed times, opal device
will return Invalid type error code even user input the correct password.
In this case, opal driver needs to force user shutdown the system before
let user input new password.
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Caller need to known this error to handle specially, but current
error status not has specified value for this type. In order to
keep compatibility, here use TcgResultFailureInvalidType as an
replacement.
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
The case is a PCD used in one library only, and in DSC component
section the PCD value is override in one of module inf. Then it cause
the bug the PCD size in the Lib autogen use the PCD value in the DSC
PCD section, but not use the override value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Hopefully this should tidy the conversion warnings.
----
Add 32-bit and 64-bit functions that count number of set bits in a bitfield
using a divide-and-count method.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Tomas Pilar <tpilar@solarflare.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Add a cache for the value of skip ModuleAutoGen
process flag. This cache can improve build performance.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Per PEP237(*), 'long' is unified with 'int' and removed from python3.
* To make the script compatible with both python2 and python3,
'type(0L)' is replaced with 'type(sys.maxsize + 1)'. In python2,
the number is 'long', while it's 'int' in python3. We can remove
the workaround after moving to python3 completely.
* long() is replaced with int() since int() returns a long when need.
(*) https://www.python.org/dev/peps/pep-0237/
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
The flash memory range is an IO address and should be presented as Memory
Mapped IO in EFI Runtime mapping. This information can be used by OS
when mapping the flash memory range.
It is especially helpful in SEV guest case, in which IO addresses should
be mapped as unencrypted. If memory region is not marked as MMIO then OS
maps the range as encrypted.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Justen Jordan L <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
After calling RegisterHotKey, the allocated memory in NewString should
be freed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
After calling SetVariable, the allocated memory in Variable should be
freed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Set the EFI_MEMORY_RUNTIME attribute in FtwNotificationEvent() only if
the attribute is not already present. This will ensure that the attributes
set by the platform drivers (e.g Ovmf pflash) is not lost.
Cc: Dong Eric <eric.dong@intel.com>
Cc: Justen Jordan L <jordan.l.justen@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reviewed-by: Star Zeng <star.zeng@intel.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
In mSmmBootPerformanceTable there are two parts,
one is the FPDT table header and the other is FPDT records.
Currently:
mPerformanceLength: The length of existing FPDT records.
mMaxPerformanceLength: The maximum length allocated for
mSmmBootPerformanceTable(including FPDT table header length
and existing FPDT records length)
But when compare mPerformanceLength with mMaxPerformanceLength
to check whether need to allocate new buffer for new FPDT
record, we miss to add mPerformanceLength with header length,
which will cause pool allocation behavior is not correct.
Now update the mPerformanceLength to fix this issue:
updated mPerformanceLength = FPDT table header length
+ existing FPDT records length.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When using Linaro GCC5+ arm-eabi toolchain on Windows, the generated
DSDT.iii contains a canonicalized ("\.\" removed and lower case)
filepath for the preprocessed DSDT.i file in the first line.
Trim.exe is called on DSDT.iii to generate DSDT.iiii, which does a
line for line comparison of filepaths encountered to the preprocessed
DSDT.i filepath found in the first line to determine what lines to
place in DSDT.iiii. Since the DSDT.i filepath is canonicalized and
all later filepaths in DSDT.iii are not canonicalized, all comparisons
fail and the result is in an empty DSDT.iiii.
Issue was first reported to Linaro here:
https://bugs.linaro.org/show_bug.cgi?id=2909
where the recommendation was to address the issue in Trim.exe.
This patch normalizes the case and pathname of all filepaths
encountered during Trim.exe execution on preprocessed files. This
fixes comparisons of filepaths that contain mismatching case on
case-insensitive filesystems, redundant separators, and uplevel
references.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Christopher Co <christopher.co@microsoft.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
RESET_UTILITY_GUID_SPECIFIC_RESET_DATA structure should be declared
as pack(1).
The patch adds the missing pack(1) pragma.
(GUID *)((UINT8 *)&ResetData +
OFFSET_OF (RESET_UTILITY_GUID_SPECIFIC_RESET_DATA, ResetSubtype))
is used to replace &ResetData.ResetSubType to resolve C4366 VS
compiler warning.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The patch adds check logic to make sure that for a input BMP file,
the width or height is not 0; for a input GOP blt buffer, the width
or height is not 0. Otherwise, UNSUPPORTED status is returned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Current code calculates ChannelCount based on CAP(NP) value.
It only works when the ports implemented number are <= CAP(NP),
for example, platform has CAP(NP) = 5 (means 6 ports) and ports
implemented are 0, 1, 2, 3, 4 and 5.
But we have some platform that has CAP(NP) = 1 (means 2 ports) and
ports implemented are 1 and 2, and has no port 0 implemented, then
current code does not work.
This patch updates the code to calculate ChannelCount based on PI value.
Cc: Amy Chan <amy.chan@intel.com>
Cc: Hong-chihX Hsueh <hong-chihx.hsueh@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Tested-by: Hong-chihX Hsueh <hong-chihx.hsueh@intel.com>
Current code assumes PpiDescriptor and Ppi are in same range
(heap/stack/hole).
This patch removes the assumption.
Descriptor needs to be converted first. It is also handled by this patch.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Qing Huang <qing.huang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
VariableHob may be built in PcdPeim (by PcdNvStoreDefaultValueBuffer)
or some platform module (by some tool).
The two solutions should not be co-exist.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
1) add a property so others can access needed data
2) change GenMake to use property
3) add local variable in GenMake to speed up access
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Two drivers include the same PCD file, the PCD value in the first
driver is correct, but it in the second driver is incorrect.
DSC:
[Components]
Testpkg/Testdriver1.inf {
<PcdsFixedAtBuild>
!include Test.txt
}
Testpkg/Testdriver2.inf {
<PcdsFixedAtBuild>
!include Test.txt
}
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
New added checkers includes:
1. Too many invalid parameters
2. Too few parameter
3. Invalid number parameter for -n and -t flag
4. Conflict parameter of -A and -R.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The perf measurement entry in SmmEntryPoint function
doesn't have significant meaning. So remove it now.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Replace StringIO.StringIO with io.BytesIO to be compatible with python3.
This commit also removes "import StringIO" from those python scripts
that don't really use it.
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Based on "futurize -f lib2to3.fixes.fix_idioms"
* Change some type comparisons to isinstance() calls:
type(x) == T -> isinstance(x, T)
type(x) is T -> isinstance(x, T)
type(x) != T -> not isinstance(x, T)
type(x) is not T -> not isinstance(x, T)
* Change "while 1:" into "while True:".
* Change both
v = list(EXPR)
v.sort()
foo(v)
and the more general
v = EXPR
v.sort()
foo(v)
into
v = sorted(EXPR)
foo(v)
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
"types.TypeType" is now an alias of the built-in "type" and is not
compatible with python 3.
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Replace "has_key()" with "in" to be compatible with python3.
Based on "futurize -f lib2to3.fixes.fix_has_key"
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Refactor print statements to be compatible with python 3.
Based on "futurize -f libfuturize.fixes.fix_print_with_import"
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Convert "except ... ," to "except ... as" to be compatible with python3.
Based on "futurize -f lib2to3.fixes.fix_except"
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=973
Bug 973 just mentions UsbBusDxe, but UsbBusPei has similar issue.
HUB descriptor has variable length.
But the code uses stack (HubDescriptor in PeiDoHubConfig) with fixed
length sizeof(EFI_USB_HUB_DESCRIPTOR) to hold HUB descriptor data.
It uses hard code length value (12) for SuperSpeed path.
And it uses HubDesc->Length for none SuperSpeed path, then there will
be stack overflow when HubDesc->Length is greater than
sizeof(EFI_USB_HUB_DESCRIPTOR).
The patch updates the code to use a big enough buffer to hold the
descriptor data.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=973
HUB descriptor has variable length.
But the code uses stack (HubDesc in UsbHubInit) with fixed length
sizeof(EFI_USB_HUB_DESCRIPTOR) to hold HUB descriptor data.
It uses hard code length value (32 that is greater than
sizeof(EFI_USB_HUB_DESCRIPTOR)) for SuperSpeed path, then there will
be stack overflow when IOMMU is enabled because the Unmap operation
will copy the data from device buffer to host buffer.
And it uses HubDesc->Length for none SuperSpeed path, then there will
be stack overflow when HubDesc->Length is greater than
sizeof(EFI_USB_HUB_DESCRIPTOR).
The patch updates the code to use a big enough buffer to hold the
descriptor data.
The definition EFI_USB_SUPER_SPEED_HUB_DESCRIPTOR is wrong (HubDelay
field should be UINT16 type) and no code is using it, the patch
removes it.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Add CapCRBIdleBypass definition to interface ID register. It complies with
existing register
Cc: Long Qin <qin.long@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
A single byte was allocate for a CHAR16 NUL terminator when instead
two bytes should have been used.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Since performance library instances have been updated
to create new FPDT records for new Perf macros.
So enhance dp tool to parse the new FPDT records.
Enhancement mainly includes:
1. parse the single records for PERF_EVENT macro
2. Parse the new added FPDT_DUAL_GUID_STRING_EVENT_RECORD
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Update the performance library instances in MdeModulePkg
to implement the APIs used for new added Perf macros.
V2:
Share the common logics of creating FPDT record for
new added Perf macros and existing Perf macros.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Remove the definitions of performance identifier since they
have been added into PerformanceLib.h.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Constructor is too early that ConnectAll() may not do. Move refresh boot
option in form open.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Xu WeiX <weix.xu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
BdsEntry marks the read-only variables if the Variable Lock protocol exists.
So, this protocol usage is updated from CONSUMES to SOMETIMES_CONSUMES.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
VS2017 reports warning LNK4281: undesirable base address 0x0 for x64 image;
set base address above 4GB for best ASLR optimization.
edk2 build always sets baes address to zero as default. So, ignore this link
warning.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Pete Batard <pete@akeo.ie>
The driver now can recognize the BlockIo2 PPI for NVM Express devices.
And support identifying the recovery capsule on those devices.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Introduces the below PPI:
struct EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI {
EDKII_NVM_EXPRESS_HC_GET_MMIO_BAR GetNvmeHcMmioBar;
EDKII_NVM_EXPRESS_HC_GET_DEVICE_PATH GetNvmeHcDevicePath;
};
The GetNvmeHcMmioBar service will provide the caller with the MMIO BAR
address of each NVMe HC within the system;
The GetNvmeHcDevicePath service will provide the caller with the device
path information of each NVMe HC.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
FSP binary potentially can include X64 drivers to
simplify implementation or support new features so
update SplitFspBin.py to support x64 image headers.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Stack overflows were observed at the default SMM stack
size of 8 KB. Increase stack size to 16 KB to prevent
SMM stack overflows.
Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>
Dynamically allocate the buffer to receive the SCMI protocol list.
This makes MAX_PROTOCOLS redundant, so it is removed.
It also fixes one minor code alignment issue and removes an unused
macro PROTOCOL_MASK.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This change fixes a bug in the SCMI DXE which is observed with the
upcoming release of the SCP firmware.
The PROTOCOL_ID_MASK (0xF) which is used to generate an index in
the ProtocolInitFxns is wrong because protocol ids can be
anywhere in 0x10 - 15 or 0x80 - FF range. This mask generates
the same index for two different protocols e.g. for protocol ids
0x10 and 0x90, which causes duplicate initialization of a protocol
resulting in a failure.
This change removes the use of PROTOCOL_ID_MASK and instead
uses a list of protocol ids and their initialization functions
to identify a supported protocol and initialize it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The DSC and FDF file can use `!error` statement. The argument of this
statement is an error message, it causes build tool to stop at the
location where the statement is encountered and error message following
the `!error` statement is output as a message.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=701
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Do a clean up to remove the unneeded code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Mva address calculation should use the left-shifted current
section index instead of the left-shifted table base address.
Using the table base address here has the side-effect of potentially
causing an access violation depending on the base address value.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Christopher Co <christopher.co@microsoft.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Given that these days, our ARM port only supports ARMv7 and later, we
can assume that the page table walker's memory accesses are cache
coherent, and so there is no need to perform cache maintenance. It
does require the page tables themselves to reside in memory mapped as
writeback cacheable so ASSERT() that this is the case.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Peculiarly enough, the current page table manipulation code takes it
upon itself to write back and invalidate the memory contents covered
by page and section mappings when their memory attributes change. It
is not generally the case that data must be written back when such a
change occurs, even when switching from cacheable to non-cacheable
attributes, and in some cases, it is actually causing problems. (The
cache maintenance is also performed on the PCIe MMIO regions as they
get mapped by the PCI bus driver, and under virtualization, each
cache maintenance operation on an emulated MMIO region triggers a
round trip to the host and back)
So let's just drop this code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Today's implementation returns 0 even when compared files are
different.
The patch returns 27 (SHELL_NOT_QUAL) in such case to follow
the shell spec.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The SATA controller driver crashes while accessing the
PCI memory [AHCI Base Registers (ABAR)], as the PCI memory
space is not enabled.
Enable the PCI memory space access to prevent the SATA
Controller driver from crashing.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
CpuDxe driver is updated to be able to access DXE page table in SMM mode,
which means Heap Guard can get correct memory paging attributes in what
environment. It's not necessary to exclude SMM from detecting Heap Guard
feature support.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The MdePkg/Library/SmmMemoryAllocationLib, used only by DXE_SMM_DRIVER,
allows to free memory allocated in DXE (before EndOfDxe). This is done
by checking the memory range and calling gBS services to do real
operation if the memory to free is out of SMRAM. If some memory related
features, like Heap Guard, are enabled, gBS interface will turn to
EFI_CPU_ARCH_PROTOCOL.SetMemoryAttributes(), provided by
DXE driver UefiCpuPkg/CpuDxe, to change memory paging attributes. This
means we have part of DXE code running in SMM mode in certain
circumstances.
Because page table in SMM mode is different from DXE mode and CpuDxe
always uses current registers (CR0, CR3, etc.) to get memory paging
attributes, it cannot get the correct attributes of DXE memory in SMM
mode from SMM page table. This will cause incorrect memory manipulations,
like fail the releasing of Guard pages if Heap Guard is enabled.
The solution in this patch is to store the DXE page table information
(e.g. value of CR0, CR3 registers, etc.) in a global variable of CpuDxe
driver. If CpuDxe detects it's in SMM mode, it will use this global
variable to access page table instead of current processor registers.
This can avoid retrieving wrong DXE memory paging attributes and changing
SMM page table attributes unexpectedly.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
On AMD processors the second SendIpi in the SendInitSipiSipi and
SendInitSipiSipiAllExcludingSelf routines is not required, and may cause
undesired side-effects during MP initialization.
This patch leverages the StandardSignatureIsAuthenticAMD check to exclude
the second SendIpi and its associated MicroSecondDelay (200).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leo Duran <leo.duran@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This commit enhances the bitmap fields defined in the IPMI header files,
union types will be used to provide the users with both the individual
bitmap access and the whole byte/word access.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The patch doesn't have functionality impact. It is just to make
VS2010/VS2012 happy.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Currently, DebugCommunicationLibUsb uses the hardcoded endpoints 0x82
and 0x01 to communicate with the EHCI Debug Device. These, however,
are not standardized and may vary across different hardware.
To solve this problem, the endpoints are retrieved from the
USB Device Descriptor directly.
V2:
- Store endpoint data in the USB Debug Port handle structure.
V3:
- Remove the static endpoint PCDs as requested.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Clang complains about left shifting a negative value being undefined.
EmbeddedPkg/Library/GdbSerialLib/GdbSerialLib.c:151:30:
error: shifting a negative signed value is undefined [-Werror,-Wshift-negative-value]
OutputData = (UINT8)((~DLAB<<7)|((BreakSet<<6)|((Parity<<3)|((StopBits<<2)| Data))));
Redefine all bit pattern constants as unsigned to work around this.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Align the prototype of ArmMtlLib's MtlWaitUntilChannelFree () with the
one in the ArmMtlNullLib implementation (rather than the other way around,
since edk2-platforms has a conflicting implementation as well)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Create the missing NOOPT target for CLANG35 (which is ARM and AARCH64
only), and align it with the other toolchains: NOOPT has optimizations
disabled entirely (for source level debugging), and DEBUG is changed
from -O0 to -O1, as is the case for CLANG38 as well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Enable to NOOPT build target so we can build this package with
optimizations disabled.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Enable to NOOPT build target so we can build this package with
optimizations disabled.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
As reported by Liming, GCC 4.9.2 does not support the -no-pie
linker option that we added to the GCC49 and GCC5 toolchain
profiles in commit c25d390552 ("BaseTools/tools_def IA32:
disable PIE code generation explicitly") to work around issues
with recent distro toolchains that enable PIE code generation
by default.
So rollback the changes for GCC49 but preserve them for GCC5
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Implement ResetSystemLib's EnterS3WithImmediateWake() routine using
a jump back to the PEI entry point with interrupts and MMU+caches
disabled. This is only possible at boot time, when we are sure that
the current CPU is the only one up and running. Also, it depends on
the platform whether the PEI code is preserved in memory (it may be
copied to DRAM rather than execute in place), so also add a feature
PCD to selectively enable this feature.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
ARM platforms have no restriction on when a system firmware update
capsule can be applied, and so it is not necessary to call
ProcessCapsules() twice. So let's drop the first invocation that
occurs before EndOfDxe, and rewrite the second call so that all
capsule updates will be applied when the console is up and able to
provide progress feedback.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
If the first call to UpdateImageProgress() fails, there is no point
in passing a pointer to it to Fmp->SetImage(), since it is highly
unlikely to succeed on any subsequent calls.
This permits the FMP implementation to fall back to an alternate means
of providing feedback to the user, e.g., via the console.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When capsule updates are staged for processing after a warm reboot,
they are copied into memory with the MMU and caches enabled. When
the capsule PEI gets around to coalescing the capsule, the MMU and
caches may still be disabled, and so on architectures where uncached
accesses are incoherent with the caches (such as ARM and AARCH64),
we need to ensure that the data passed into UpdateCapsule() is
written back to main memory before performing the warm reboot.
Unfortunately, on ARM, the only type of cache maintenance instructions
that are suitable for this purpose operate on virtual addresses only,
and given that the UpdateCapsule() prototype includes the physical
address of a linked list of scatter/gather data structures that are
mapped at an address that is unknown to the firmware (and may not even
be mapped at all when UpdateCapsule() is invoked), we can only perform
this cache maintenance at boot time. Fortunately, both Windows and Linux
only invoke UpdateCapsule() before calling ExitBootServices(), so this
is not a problem in practice.
In the future, we may propose adding a secure firmware service that
permits performing the cache maintenance at OS runtime, in which case
this code may be enhanced to call that service if available. For now,
we just fail any UpdateCapsule() calls performed at OS runtime on ARM.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Check the return value of HiiGetBrowserData() before calling HiiSetBrowserData().
HiiGetBrowserData() failed to retrieve NV data during action EFI_BROWSER_ACTION_RETRIEVE.
If NV data is invalid, stop sending it to form browser.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Nickle Wang <nickle.wang@hpe.com>
Signed-off-by: cinnamon shia <cinnamon.shia@hpe.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Add QemuRamfbDxe device path to the list of platform console devices,
so ConSplitter will pick up the device even though it isn't a PCI GPU.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Per PI spec, the Length value is the length of the ACPI descriptor
in bytes, excluding the first two fields.
The patch fixes the code to report the correct descriptor length
by excluding 3-byte first two fields.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Some platform support dynamic clocking, which is controlled by some
jumper setting or hardware registers. Result of that is that PCD
PL011UartClkInHz would need to be updated for frequency change.
This patch implements support for dynamic frequency for PL011 uart.
This patch implements default lib, which is using Pcd. Platform which
needs dynamic clocking needs implement PL011UartClockLib
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Udit Kumar <udit.kumar@nxp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
V3:
support exclude dir and file by name while traversing the directory.
remove close in with statement.
V2:
add version,description,copyright.
add flag -v,-q,--append-extensions,--override-extensions,--debug.
-q will omit default output,-v and --debug are not implemented.
add default file extensions.
support input of file path.
support muliple input path.
simplify comment.
change 'pattern'.encode() to b'pattern',I think this will be better.
change naming of variable and function to keep the same with BinToPcd.py
V1:
FormatDosFiles.py is added to clean up dos source files. It bases on
the rules defined in EDKII C Coding Standards Specification.
5.1.2 Do not use tab characters
5.1.6 Only use CRLF (Carriage Return Line Feed) line endings.
5.1.7 All files must end with CRLF
No trailing white space in one line. (To be added in spec)
The source files in edk2 project with the below postfix are dos format.
.h .c .nasm .nasmb .asm .S .inf .dec .dsc .fdf .uni .asl .aslc .vfr .idf
.txt .bat .py
The package maintainer can use this script to clean up all files in his
package. The prefer way is to create one patch per one package.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Dongao Guo <dongao.guo@intel.com>
The case is DSC file include file1, file1 include file2, after parse
file2 finished, DSC parser get the wrong section type, then it would
report invalid error.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
Currently in DP, the Trace mode is enabled by default.
And the profile mode is not implemented. but the help info
of DP tool doesn't match current implementation. Which will
make user confused. So now remove the unused source code
related to the profile mode and update the help information
of DP tool.
V2: Remove the unused code related to profile mode.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Issue:
When run "dp -s" or ("dp -v") command in shell several times,
the summary reuslts are different each time.
The root cause is that the previous global data "SummaryData"
is not cleaned when the dp command is callled next time.
This patch initializes the global data "SummaryData"
when the dp dymanic command is called.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Run dp command now:
Firstly it will get performance records from FPDT and then
parse the DP command. And if encounter invalid parameters,
it will exit directly. Thus the performance records got before
are invalid. And what's worse is that the memory allocated in
getting performance records phase is not freed.
This patch update the code to parse the command firstly and
then get the performance records. And make sure that all the
clean work has been done before exiting.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
As a security measure, some distros now build their GCC toolchains with
PIE code generation enabled by default, because it is a prerequisite
for ASLR to be enabled when running the executable.
This typically results in slightly larger code, but it also generates
ELF relocations that our tooling cannot deal with, so let's disable it
explicitly when using GCC49 or later for IA32. (Note that this does not
apply to X64: it uses PIE code deliberately in some cases, and our
tooling does deal with the resuling relocations)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Commit 180ac200da changes the input parameter
from BOOLEAN to UINTN. Its comparison logic should be updated.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Commit cb96e7d4f7 changes the input parameter
from BOOLEAN to UINTN. Its comparison logic should be updated.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Commit d2aafe1e41 changes the input parameter
from BOOLEAN to UINTN. Its comparison logic should be updated.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Switch to the new IoLib implementation that will only use KVM
safe instructions to perform MMIO memory accesses.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
KVM on ARM refuses to decode load/store instructions used to perform
I/O to emulated devices, and instead relies on the exception syndrome
information to describe the operand register, access size, etc.
This is only possible for instructions that have a single input/output
register (as opposed to ones that increment the offset register, or
load/store pair instructions, etc). Otherwise, QEMU crashes with the
following error
error: kvm run failed Function not implemented
R00=01010101 R01=00000008 R02=00000048 R03=08000820
R04=00000120 R05=7faaa0e0 R06=7faaa0dc R07=7faaa0e8
R08=7faaa0ec R09=7faaa088 R10=000000ff R11=00000080
R12=ff000000 R13=7fccfe08 R14=7faa835f R15=7faa887c
PSR=800001f3 N--- T svc32
QEMU: Terminated
and KVM produces a warning such as the following in the kernel log
kvm [17646]: load/store instruction decoding not implemented
The IoLib implementation provided by MdePkg/Library/BaseIoLibIntrinsic
is based on C code, and when LTO is in effect, the MMIO accesses could
be merged with, e.g., manipulations of the loop counter, producing
opcodes that KVM does not support for emulated MMIO.
So let's add a special ArmVirt flavor of this library that implements
that actual load/store operations in assembler, ensuring that the
instructions involved can be emulated by KVM.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The dsc nested include checking make unexpected build error when
building project A and switch to project B.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
This was the warning (shown for __aeabi_memcpy, __aeabi_memcpy4 and
__aeabi_memcpy8):
ArmPkg/Library/CompilerIntrinsicsLib/memcpy.c:42:6:
error: '__aeabi_memcpy8' alias between functions of incompatible types
'void(void*, const void *, size_t)'
{aka 'void(void *, const void *, unsigned int)'}
and 'void *(void *, const void *, size_t)'
{aka 'void *(void *, const void *, unsigned int)'} [-Werror=attribute-alias]
void __aeabi_memcpy8(void *dest, const void *src, size_t n);
ArmPkg/Library/CompilerIntrinsicsLib/memcpy.c:19:7: note: aliased declaration here
void *__memcpy(void *dest, const void *src, size_t n)
The problem is the different return type (void vs void*). So reshuffle
the code so the prototypes match between the aliases.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
[ardb: change prototype of internal __memcpy() and drop extra wrapper]
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Lower the priority of the DEBUG print in EmmcReadWrite(), which
is emitted for each read or write operation to the eMMC device,
which clutters up the log output of builds created with DEBUG_INFO
enabled.
Suggested-by: Pipat Methavanitpong <methavanitpong.pipat@socionext.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Current implemenation sets PM1_CNT.SCI_EN bit at ReadyToBoot event.
However, this should not be done because this causes OS to skip triggering
FADT.SMI_CMD, which leads to the functions implemented in the SMI
handler being omitted.
This issue was identified by Matt Delco <delco@google.com>.
The fix does the following:
- The SCI_EN bit setting is removed from CbSupportDxe driver.
- Some additional checks are added in CbParseFadtInfo() in CbParseLib.c to
output some error message and ASSERT (FALSE) if ALL of the following
conditions are met:
1) HARDWARE_REDUCED_ACPI is not set;
2) SMI_CMD field is zero;
3) SCI_EN bit is zero;
which indicates the ACPI enabling status is inconsistent: SCI is not
enabled but the ACPI table does not provide a means to enable it through
FADT->SMI_CMD. This may cause issues in OS.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Prince Agyeman <prince.agyeman@intel.com>
Cc: Matt Delco <delco@google.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Matt Delco <delco@google.com>
The patch 5a57246eab Rename String to StringUtils, but it didn't
update the UPT Tool for the import statement which cause UPT tool
break.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Put the UART in FIFO Polled Mode by clearing IER after setting FCR.
Also, add comments to show DLAB state for registers 0 and 1.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leo Duran <leo.duran@amd.com>
Cc: Star Zeng <star.zeng@intel.com>
CC: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=801
Based on content from the following branch/commits:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport
* Change Update_Image_Progress() to UpdateImageProcess()
* Call DisplayUpdateProgressLib from UpdateImageProgress().
* Split out a boot service and runtime version of
UpdateImageProgress() so the DisplayUpdateProgressLib is
not used at runtime.
* If gEdkiiFirmwareManagementProgressProtocolGuid is present,
then use its progress bar color and watchdog timer value.
* If gEdkiiFirmwareManagementProgressProtocolGuid is not present,
then use default progress bar color and 5 min watchdog timer.
* Remove Print() calls during capsule processing. Instead,
the DisplayUpdateProgressLib is used to inform the user
of progress during a capsule update.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The patch adds AtaAtapiPolicy protocol which is produced by platform
and consumed by AtaAtapiPassThruDxe driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The patch adds support to certain devices that support PUIS (Power
up in Standby).
For those devices that supports SET_FEATURE spin up, SW needs to
send SET_FEATURE subcommand to spin up the devices.
For those devices that doesn't support SET_FEATURE spin up, SW needs
to send read sectors command to spin up the devices.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
NASM has replaced ASM and S files.
1. Remove ASM from all modules expect for the ones in ResetVector directory.
The ones in ResetVector directory are included by Vtf0.nasmb. They are
also nasm style.
2. Remove S files from the drivers only.
3. https://bugzilla.tianocore.org/show_bug.cgi?id=881
After NASM is updated, S files can be removed from Library.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
NASM has replaced ASM and S files.
1. Remove ASM from all modules.
2. Remove S files from the drivers only.
3. https://bugzilla.tianocore.org/show_bug.cgi?id=881
After NASM is updated, S files can be removed from Library.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
NASM has replaced ASM and S files.
1. Remove ASM from all modules.
2. Remove S files from the drivers only.
3. https://bugzilla.tianocore.org/show_bug.cgi?id=881
After NASM is updated, S files can be removed from Library.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
GCC8 reported it with the following warning:
ArmPkg/Library/ArmDisassemblerLib/ArmDisassembler.c: In function 'DisassembleArmInstruction':
ArmPkg/Library/ArmDisassemblerLib/ArmDisassembler.c:397:30: error: bitwise
comparison always evaluates to false [-Werror=tautological-compare]
if ((OpCode & 0x0db00000) == 0x03200000) {
This condition tries to be true for both the immediate and the register
version of the MSR instruction. They get identified inside the if-block
using the variable I, which contains the value of bit 25.
The problem with the comparison reported by GCC is that the
bitmask excludes bit 25, while the value requires it to be set to one:
0x0db00000: 0000 11011 0 11 00 00 0000 000000000000
0x03200000: 0000 00110 0 10 00 00 0000 000000000000
^
So the solution is to just don't require that bit to be set, because
it gets checked later using 'I', which results in the following value:
0x01200000: 0000 00010 0 10 00 00 0000 000000000000
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add support for the following types to VolInfo:
EFI_FV_FILETYPE_MM_STANDALONE
EFI_FV_FILETYPE_MM_CORE_STANDALONE
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ezra Godfrey <egodfrey.qdt@qualcommdatacenter.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
If the PCD's datum type is UINT8, UINT16, UINT32 or UINT64, then in
the report will display both hexadecimal format and integer format
of PCD value.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
According to VTd spec, Software writes the value read from this
field (F) to Clear it. But current code is using 0 to clear the
field, that is incorrect.
And R_FSTS_REG register value clearing should be not in the for loop.
Without this patch, we will see same VTd error message appears again
and again after it occurs first time.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This patch add function EfiTimeToWday() which returns
day of the week.
It is needed by our upcoming patches in edk2-platforms.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
BootLogo protocol is not always required. If it not is installed,
BootManagerMenuApp can work.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Because the DxeResetSystemLib calls gRT->ResetSystem(), make sure
the gRT->ResetSystem() implementation doesn't call into
DxeResetSystemLib to avoid chicken-egg issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Current DxeResetSystemLib depends on UefiRuntimeLib because it calls
EfiResetSystem() API exposed by UefiRuntimeLib.
Due to the commit:
"MdePkg/UefiRuntimeLib: Do not allow to be linked by DXE driver"
which reverts UefiRuntimeLib to only support DXE_RUNTIME_DRIVER,
removing UefiRuntimeLib dependency makes the DxeResetSystemLib
can be used by DXE drivers.
The patch also disallows the DxeResetSystemLib to be linked by
runtime driver, SMM drivers.
Runtime driver cannot link to this library because the gRT is not
converted when entering to RT.
SMM driver cannot link to this library because calling RT services
from SMM after EndOfDxe violates security guideline.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
When UefiRuntimeLib links to a DXE driver, its constructor
still registers a Virtual Address Change event. The event callback
will get called when RT.SetVirtualAddressMap() is called from OS.
But when the driver is a DXE driver, the memory occupied by the
callback function might be zeroed or used by OS since the BS type
memory is free memory when entering to RT phase.
The patch reverts commit 97511979b4
"MdePkg/UefiRuntimeLib: Support more module types."
It makes sure that DXE driver cannot link to this library.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
BZ#: https://bugzilla.tianocore.org/show_bug.cgi?id=923
X509_NAME_get_text_by_NID() used in X509GetCommonName() implementation
is one legacy function which have various limitations. The returned
data may be not usable when the target cert contains multicharacter
string type like a BMPString or a UTF8String.
This patch replaced the legacy function usage with more general
X509_NAME_get_index_by_NID() / X509_NAME_get_entry() APIs for X509
CommonName retrieving.
Tests: Validated the commonName retrieving with test certificates
containing PrintableString or BMPString data.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Long Qin <qin.long@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Until now the possible errors returned from processing
boot firmware volume were not checked, which could cause
misbehavior in further booting stages. Add relevant assert.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Add a PCD that holds the lowest supported version number, so that we
can allow the platform to configure this at build time.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Replace the call to and implementation of the function
FpdtAllocateReservedMemoryBelow4G() with a call to
AllocatePeiAccessiblePages, which boils down to the same on X64,
but does not crash non-X64 systems that lack memory below 4 GB.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Replace the call to and implementation of the function
FpdtAllocateReservedMemoryBelow4G() with a call to
AllocatePeiAccessiblePages, which boils down to the same on X64,
but does not crash non-X64 systems that lack memory below 4 GB.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Add a routine to DxeServicesLib that abstracts the allocation of memory
that should be accessible by PEI after resuming from S3. We will use it
to replace open coded implementations that limit the address to < 4 GB,
which may not be possible on non-Intel systems that have no 32-bit
addressable memory at all.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Consumers of status code reports may rely on a status code to be
reported when the ReadyToBoot event is signalled. For instance,
FirmwarePerformanceDxe will fail to install the FPDT ACPI table
in this case. So add the missing call.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Consumers of status code reports may rely on a status code to be
reported when the ReadyToBoot event is signalled. For instance,
FirmwarePerformanceDxe will fail to install the FPDT ACPI table
in this case. So add the missing call.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Almost exactly two years after commit 2f7b34b208, we've grown out the
10MB DXEFV:
> build -a IA32 -a X64 -p OvmfPkg/OvmfPkgIa32X64.dsc -b NOOPT -t GCC48 \
> -D SMM_REQUIRE -D SECURE_BOOT_ENABLE -D TLS_ENABLE -D E1000_ENABLE \
> -D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE
>
> [...]
>
> GenFv: ERROR 3000: Invalid
> the required fv image size 0xa28d48 exceeds the set fv image size
> 0xa00000
Raise the DXEFV size to 11MB.
(For builds that don't need this DXEFV bump, I've checked the
FVMAIN_COMPACT increase stemming from the additional 1MB padding, using
NOOPT + GCC48 + FD_SIZE_2MB, and no other "-D" flags. In the IA32 build,
FVMAIN_COMPACT grows by 232 bytes. In the IA32X64 build, FVMAIN_COMPACT
shrinks by 64 bytes. In the X64 build, FVMAIN_COMPACT shrinks by 376
bytes.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Gary Lin <glin@suse.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=801
Add a new API to the PlatformFlashAccessLib that passes
in an optional Progress() function along with a start and
end percentage to call the Progress() function with.
If the Progress() function is not NULL, then it is the
Progress() function that was passed into the Firmware
Management Protocol SetImage() services and is used
to update the user on the progress as a firmware device
is updated with a firmware image.
Implementations of the PlatformFlashAccessLib are
recommended to call the Progress() function as work
is performed to update to contents of a firmware
storage device.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=801
Based on content from the following branch/commits:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport
Add the DisplayUpdateProgressLib class that is used
to inform the user of progress during updates of
firmware images in firmware devices. A platform
specific instance of this library can be used to
customize how the user is informed of progress.
Add the EDK II Firmware Management Progress Protocol.
This is an optional protocol that must be installed
onto the same handle as a Firmware Management Protocol.
This new protocol provides the color of a progress
bar that allows different firmware devices to use
different colors during a firmware update. It also
provides a watchdog timer value in seconds that is
armed each time the Progress() service passed
into Firmware Management Protocol SetImage()
is called.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Per PCIE spec, Memory Write and Invalidate is hardwired to 0b so
PciBus driver shouldn't write 1b to it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
CreatePciIoDevice() detects whether the PCI device is a PCI Express
device and remembers the device type in PciIoDevice->IsPciExp.
RegisterPciDevice() detects the device type again which is
unnecessary. The detection logic can be removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
According to IA manual:
"Before setting this bit (MSR_IA32_MISC_ENABLE[22]) , BIOS must
execute the CPUID.0H and examine the maximum value returned in
EAX[7:0]. If the maximum value is greater than 2, this bit is
supported."
We need to fix our current detection logic to compare against 2.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Ming Shao <ming.shao@intel.com>
In certain HW implementation, the BIT7 of RTC Index register(0x70) is
for NMI sources enable/disable but the BIT7 of 0x70 cannot be read
before writing. Software which doesn't want to change the NMI sources
enable/disable setting can write to the alias register 0x74, through
which only BIT0 ~ BIT6 of 0x70 is modified.
So two new PCDs are added so that platform can have the flexibility
to change the default RTC register addresses from 0x70/0x71 to
0x74/0x75.
With the new PCDs added, it can also support special HW that provides
RTC storage in a different register pairs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
For case-insensitive file systems, edk2 String.py collides with the
Python string.py, which results in build errors. This,for example,
applies to building via the Windows Subsystem for Linux from a
DriveFS file system. This patch renames String to StringUtils to
prevent conflicts for case-insensitive file systems.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
MmSwDispatch.h current refers to the deprecated SmmSw2Dispatch
protocol. Replace those references with the new MmSwDispatch name.
V2:
- Do not change the copyright date as requested.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch adds the HPET Event Timer Block ID definition that can be
found in the IA-PC HPET Specification, section 3.2.4.
V2:
- Do not change the copyright date as requested.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The EvaluateConditional function should not call GetRealFileLine
because this is already done in Warning init and only needs to be
calculated in the event of a parsing failure. This fix stops
InsertedLines from being subtracted twice during error handling.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zurcher, Christopher J <christopher.j.zurcher@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Current code assumes the max bus(0xFF) is under this P2P bridge and
temporarily set it as subordinate bus.
It may cause silicon hangs during PCI enumeration in some specific
case.
Instead, it should get the max bus number from the bus number
resources returned from
PCI_HOST_BRIDGE_RESOURCE_ALLOCATION.StartBusEnumeration() and set it
as subordinate bus.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Currently, SmbiosLib declares the PcdLib library class. Update the
declaration to declare SmbiosLib.
V2:
- Do not change the copyright date as requested.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Replace the manual capability list parsing in OvmfPkg/Virtio10Dxe with
PciCapLib and PciCapPciIoLib API calls.
The VIRTIO_PCI_CAP_LINK structure type is now superfluous. (Well, it
always has been; we should have used EFI_PCI_CAPABILITY_HDR.)
Also, EFI_PCI_CAPABILITY_VENDOR_HDR is now included at the front of
VIRTIO_PCI_CAP. No driver other than Virtio10Dxe relies on VIRTIO_PCI_CAP.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Replace the manual capability list parsing in OvmfPkg/PciHotPlugInitDxe
with PciCapLib and PciCapPciSegmentLib API calls.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Resolve the PciCapLib, PciCapPciSegmentLib, and PciCapPciIoLib classes to
their single respective instances under OvmfPkg. Later patches will use
those lib classes in OvmfPkg drivers, some of which are included in
ArmVirt platforms.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Resolve the PciCapLib, PciCapPciSegmentLib, and PciCapPciIoLib classes to
their single respective instances. Later patches will use these lib
classes in OvmfPkg drivers.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add a library class, and a UEFI_DRIVER lib instance, that are layered on
top of PciCapLib, and allow clients to plug an EFI_PCI_IO_PROTOCOL backend
into PciCapLib, for config space access.
(Side note:
Although the UEFI spec says that EFI_PCI_IO_PROTOCOL_CONFIG() returns
EFI_UNSUPPORTED if "[t]he address range specified by Offset, Width, and
Count is not valid for the PCI configuration header of the PCI
controller", this patch doesn't directly document the EFI_UNSUPPORTED
error code, for ProtoDevTransferConfig() and its callers
ProtoDevReadConfig() and ProtoDevWriteConfig(). Instead, the patch refers
to "unspecified error codes". The reason is that in edk2, the
PciIoConfigRead() and PciIoConfigWrite() functions [1] can also return
EFI_INVALID_PARAMETER for the above situation.
Namely, PciIoConfigRead() and PciIoConfigWrite() first call
PciIoVerifyConfigAccess(), which indeed produces the standard
EFI_UNSUPPORTED error code, if the device's config space is exceeded.
However, if PciIoVerifyConfigAccess() passes, and we reach
RootBridgeIoPciRead() and RootBridgeIoPciWrite() [2], then
RootBridgeIoCheckParameter() can still fail, e.g. if the root bridge
doesn't support extended config space (see commit 014b472053).
For all kinds of Limit violations in IO, MMIO, and config space,
RootBridgeIoCheckParameter() returns EFI_INVALID_PARAMETER, not
EFI_UNSUPPORTED. That error code is then propagated up to, and out of,
PciIoConfigRead() and PciIoConfigWrite().
[1] MdeModulePkg/Bus/Pci/PciBusDxe/PciIo.c
[2] MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c
)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add a library class, and a BASE lib instance, that are layered on top of
PciCapLib, and allow clients to plug a PciSegmentLib backend into
PciCapLib, for config space access.
(Side note:
The "MaxDomain" parameter is provided because, in practice, platforms
exist where a PCI Express device may show up on a root bridge such that
the root bridge doesn't support access to extended config space. Earlier
the same issue was handled for MdeModulePkg/PciHostBridgeDxe in commit
014b472053. However, that solution does not apply to the PciSegmentLib
class, because:
(1) The config space accessor functions of the PciSegmentLib class, such
as PciSegmentReadBuffer(), have no way of informing the caller whether
access to extended config space actually succeeds.
(For example, in the UefiPciSegmentLibPciRootBridgeIo instace, which
could in theory benefit from commit 014b472053, the
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.Pci.Read() status code is explicitly
ignored, because there's no way for the lib instance to propagate it
to the PciSegmentLib caller. If the
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.Pci.Read() call fails, then
DxePciSegmentLibPciRootBridgeIoReadWorker() returns Data with
indeterminate value.)
(2) There is no *general* way for any firmware platform to provide, or
use, a PciSegmentLib instance in which access to extended config space
always succeeds.
In brief, on a platform where config space may be limited to 256 bytes,
access to extended config space through PciSegmentLib may invoke undefined
behavior; therefore PciCapPciSegmentLib must give platforms a way to
prevent such access.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add a library class, and a BASE lib instance, to work more easily with PCI
capabilities in PCI config space. Functions are provided to parse
capabilities lists, and to locate, describe, read and write capabilities.
PCI config space access is abstracted away.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Commit 88252a90d1 changed ValueChain
from a dict to a set, but also changed the (former) key type from a
touple to two separate values, which was probably unintended and also
breaks build for packages involving Structured PCDs, because add()
only takes one argument.
This commit changes the values back to touples.
V2:
- Removed a whitespace change.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Call Tcg2PhysicalPresenceLibProcessRequest() to process pending PPI
requests from PlatformBootManagerAfterConsole().
Laszlo understanding of edk2 is that the PPI operation processing was
meant to occur *entirely* before End-Of-Dxe, so that 3rd party UEFI
drivers couldn't interfere with PPI opcode processing *at all*.
He suggested that we should *not* call
Tcg2PhysicalPresenceLibProcessRequest() from BeforeConsole(). Because,
an "auth" console, i.e. one that does not depend on a 3rd party
driver, is *in general* impossible to guarantee. Instead we could opt
to trust 3rd party drivers, and use the "normal" console(s) in
AfterConsole(), in order to let the user confirm the PPI requests. It
will depend on the user to enable Secure Boot, so that the
trustworthiness of those 3rd party drivers is ensured. If an attacker
roots the guest OS from within, queues some TPM2 PPI requests, and
also modifies drivers on the EFI system partition and/or in GPU option
ROMs (?), then those drivers will not load after guest reboot, and
thus the dependent console(s) won't be used for confirming the PPI
requests.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cloned "SecurityPkg/Library/DxeTcg2PhysicalPresenceLib" and:
- removed all the functions that are unreachable from
Tcg2PhysicalPresenceLibProcessRequest() [called from platform BDS],
or SubmitRequestToPreOSFunction() and
ReturnOperationResponseToOsFunction() [called from Tcg2Dxe].
- replaced everything that's related to the
TCG2_PHYSICAL_PRESENCE*_VARIABLE variables, with direct access to
the QEMU structures.
This commit is based on initial experimental work from Stefan Berger.
In particular, he wrote most of QEMU PPI support, and designed the
qemu/firmware interaction. Initially, Stefan tried to reuse the
existing SecurityPkg code, but we eventually decided to get rid of the
variables and simplify the ovmf/qemu version.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[lersek@redhat.com: clean up non-idiomatic coding style]
[lersek@redhat.com: null mPpi on invalid PPI address]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add some common macros and type definitions corresponding to the QEMU
TPM interface.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
This NULL library will let us call
Tcg2PhysicalPresenceLibProcessRequest() unconditionally from
BdsPlatform when building without TPM2_ENABLE.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[lersek@redhat.com: replace MdeModulePkg.dec w/ MdePkg.dec]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Error message is not clear when PCD type defined in driver's Library
is different with PCD type defined in DSC components or PCD type
defined in DSC PCD section.
Case as below:
DSC:
[PcdsFixedAtBuild]
PcdToken.PcdCName | "A"
[Components]
TestPkg/TestDriver.inf {
<PcdsPatchableInModule>
PcdToken.PcdCName | "B"
}
Library:
[Pcd]
PcdToken.PcdCName
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Per DSC spec 3.11 [Components] Sections:
The PCD access methods (and storage methods) are selected on a platform
basis - it is not permitted to have a PCD listed in one of the Pcd
sections and use it differently in an individual module. For example,
if a PCD is listed in a [PcdsFixedAtBuild] section, it is not permitted
to list it in a <PcdsPatchableInModule> sub-section of an INF file.
but current code doesn't report error for this case.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=951
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Update package format info in _PRS to TcgNvs after memory is allocated.
Change-Id: Icfadb350e60d3ed2df332e92c257ce13309c0018
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Yao Jiewen <jiewen.yao@intel.com>
Cc: Long Qin <qin.long@intel.com>
Signed-off-by: Zhang, Chao B <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
The crossing GCC compiler may use the different path for make and gcc tool.
So, GCC_HOST_BIN is introduced for make path. GCC5_BIN is still kept for
gcc path. User needs to set GCC_HOST_BIN besides set GCC5_BIN env if
the default make is not used. Normally, make is in the default system path.
GCC_HOST_BIN is not required to be set.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
In commit b6d5def2fa
when adding 'OUT' decorator for the parameter in AddUnicodeString(),
it delete the function name by mistake. This patch is to fix this
issue.
CC: Marvin Haeuser <Marvin.Haeuser@outlook.com>
CC: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The PeriodicSmiDispatchFunction() in SmmPeriodicSmiLib may assert
with "Bad CR signature".
Currently, the SetActivePeriodicSmiLibraryHandler() function
(invoked at the beginning of the PeriodicSmiDispatchFunction()
function) attempts to locate the PERIODIC_SMI_LIBRARY_HANDLER_CONTEXT
structure pointer for the current periodic SMI from a given
EFI_SMM_PERIODIC_TIMER_REGISTER_CONTEXT (RegiserContext) structure
pointer (using the CR macro).
The RegisterContext structure pointer passed to the
PeriodicSmiDispatchFunction() is assumed to point to the same
RegisterContext structure address given to the
SmmPeriodicTimerDispatch2 protocol Register() API in
PeriodicSmiEnable().
However, certain SmmPeriodicTimerDispatch2 implementation may copy
the RegisterContext to a local buffer and pass that address as the
context to PeriodicSmiDispatchFunction() in which case usage of the
CR macro to find the parent structure base fails.
The patch uses the LookupPeriodicSmiLibraryHandler() function to
find the PERIODIC_SMI_LIBRARY_HANDLER_CONTEXT structure pointer.
This works even in this scenario since the DispatchHandle returned
from the SmmPeriodicTimerDispatch2 Register() function uniquely
identifies that registration.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Virtio RNG devices are never boot devices, so in commit 245c643cc8 we
stopped connecting them. This is a problem because an OS boot loader may
depend on EFI_RNG_PROTOCOL to seed the OS's RNG.
Connect Virtio RNG devices again. And, while commit 245c643cc8 removed
that from PlatformBootManagerAfterConsole(), reintroduce it now to
PlatformBootManagerBeforeConsole() -- this way Driver#### options launched
between both functions may access EFI_RNG_PROTOCOL too.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: 245c643cc8
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1579518
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Virtio RNG devices are never boot devices, so in commit ff1d0fbfba we
stopped connecting them. This is a problem because an OS boot loader may
depend on EFI_RNG_PROTOCOL to seed the OS's RNG.
Connect Virtio RNG devices again. And, while commit ff1d0fbfba removed
that from PlatformBootManagerAfterConsole(), reintroduce it now to
PlatformBootManagerBeforeConsole() -- this way Driver#### options launched
between both functions may access EFI_RNG_PROTOCOL too.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: ff1d0fbfba
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1579518
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Then check for PCI_CLASS_DISPLAY_VGA using the new field.
This allows to enable/disable non-vga display classes per
card entry.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The PEIM in all cached FV image may be in registered for shadow status.
Current logic CurrentPeimFvCount is not enough.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The functions AddUnicodeString() and AddUnicodeString2() might return
a new value into their parameter UnicodeStringTable, hence add the
appropiate 'OUT' decorator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The functions AddUnicodeString() and AddUnicodeString2() might return
a new value into their parameter UnicodeStringTable, hence add the
appropiate 'OUT' decorator.
V2: Update FrameworkUefiLib as well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The UEFI PI specification defines PpiDescriptor to be OPTIONAL for
the LocatePpi PEI Service. This patch reflects this in the function
declaration and definition of the corresponding PeiServices library
function.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add link and version info for the referenced spec.
Cc: Jiewen yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Add link and version info for the referenced spec.
Cc: Jiewen yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
The order of List enumeration is arbitrary.
Need to be sorted while calculating Package/Module hash, otherwise it
generate different hash value even nothing changes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
For no warning message when do the PSID revert action, the
message in the popup dialog is not enough. The error use
of NULL for CreatePopUp function caused this regression.
This change fixed it.
Passed Unit Test:
1. Check PSID revert with/without warning message cases.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Function definition different with function implementation
caused this build failure. Change code to make them
consistent to pass the build.
Done Unit Test:
1. Pass GCC build.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
If both ConIn and ConOut exist, but ConIn references none of the PS/2
keyboard, the USB wild-card keyboard, and any serial ports, then
PlatformInitializeConsole() currently allows the boot to proceed without
any input devices at all. This makes for a bad user experience -- the
firmware menu could only be entered through OsIndications, set by a guest
OS.
Do what ArmVirtQemu does already, namely connect the consoles, and add
them to ConIn / ConOut / ErrOut, unconditionally. (The underlying
EfiBootManagerUpdateConsoleVariable() function checks for duplicates.)
The issue used to be masked by the EfiBootManagerConnectAll() call that
got conditionalized in commit 245c643cc8.
This patch is best viewed with "git show -b -W".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: 245c643cc8
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1577546
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
If Fvb is a NULL, return EFI_UNSUPPORTED.
If the remaining size is not enough, return EFI_OUT_OF_RESOURCES.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: cinnamon shia <cinnamon.shia@hpe.com>
Signed-off-by: Ansen Huang <ansen.huang@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Fix the issue that failed to update or add a UEFI variable if the remaining size is equal to the data size
of the variable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: cinnamon shia <cinnamon.shia@hpe.com>
Signed-off-by: Ansen Huang <ansen.huang@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When self.Alignment is None, it ran into python error since there is no
strip() in None.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
the ArraySize and Array already be got in line 1093, so this code are
redundant.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
V2:
Add function _INIT_OPHDR_COND () for variable initialization.
Make code logic more clean.
Previously _CLEAR_SAVED_OPHDR () is used for variable
initialization, and we updated it to clean memory.
But _CLEAR_SAVED_OPHDR () is still called for variable
initialization. This will cause uninitialized pointer
will be checked to free and cause unexpected issue.
This patch is to add new function for variable initialization
and keep _CLEAR_SAVED_OPHDR () to clean memory which is
aligned with its function name.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Gary Lin <glin@suse.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
RootBridgeIo.PollMem()/PollIo() originally don't count the IO/MMIO
access overhead when delaying.
The patch changes the implementation to count the access overhead
so that the actually delay equals to user required delay.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Certain Legacy USB implementation needs to access legacy data (BDA,
etc.) from SMM environment. While currently it's not allowed to
access BS memory from SMM after EndofDxe, change the legacy data
to use reserved memory type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The function SecStartup() is not supposed to return. Hence, add the
NORETURN decorator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The Fedora distro ships a modified OpenSSL 1.1.0 package stream. One of
their patches calls the secure_getenv() C library function. We already
have a stub for getenv(); it applies trivially to secure_getenv() as well.
Add the secure_getenv() stub so that edk2 can be built with Fedora's
OpenSSL 1.1.0 sources.
Cc: Qin Long <qin.long@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Long Qin <qin.long@intel.com>
AcpiPlatformDxe solely performs one-time tasks and does not expose
any services or create any events. Hence it can safely be unloaded
after the Entry Point execution by returning an error code.
V2: Return EFI_REQUEST_UNLOAD_IMAGE.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
If the capsule from command line is not present,
Buffer will be random value when freeing it in DumpCapsule(),
then ASSERT will happen or other memory pool may be freed.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
the commit bff74750 introduce a undefined variable name 'scope' cause build
failure, it should use 'Scope'.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
/D and -D flags have been added. So, /U and -U flags should be added.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
This patch is to add the instance of library class [SafeIntLib] to fix the
NetworkPkg build error, which is caused by the commit of 2167c7f7 that the
TlsLib will always consume SafeIntLib.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Long Qin <qin.long@intel.com>
Cc: Bi Dandan <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
This option, which is used in VS2015 and earlier toolchains, was missing
for VS2017. Applying it greatly reduces the size of generated binaries.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Commit eece4292ac changed a variable name, which was tied directly to
a config file entry. This seperates the internal variable names from
the config file entries by having the internal dict accessed through a
translation of key words.
added a test when this is run straight from command line.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
this class has a fucntion to share between Exception and RangeExpression
change both classes to call this function init in their init
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
currently GUID packing and pack size determination is spread
throughout the code. This introduces a shared function and dict and
routes all code paths through them.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
the function is only used in one other function.
just move it there.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
change methods which do not use self to @staticmethod
change their calls to use class name instead of instance
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
this serves no purpose since we dont change the global or assign to it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
add the API root in one class file.
delete the static API out of both classes.
share it in the single location.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
change methods which do not use self to @staticmethod
change their calls to use class name instead of instance
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
make this function @staticmethod since self parameter is not used.
change valuelist to valuedict since it is a dictionary.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
PCD size by type is shared so this change both removes duplication
and makes the function work for all numeric PCD types.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
According to UEFI spec, the RouteConfig protocol function should populate
the Progress pointer with an address inside Configuration. This patch
ensures that these functions are compliant when EFI_NOT_FOUND is returned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
According to UEFI spec, the RouteConfig protocol function should populate
the Progress pointer with an address inside Configuration. This patch
ensures that these functions are compliant when EFI_NOT_FOUND is returned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
According to UEFI spec, the RouteConfig protocol function should populate
the Progress pointer with an address inside Configuration. This patch
ensures that these functions are compliant when EFI_NOT_FOUND is returned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
According to UEFI spec, the RouteConfig protocol function should populate
the Progress pointer with an address inside Configuration. This patch
ensures that these functions are compliant when EFI_NOT_FOUND is returned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
According to UEFI spec, the RouteConfig protocol function should populate
the Progress pointer with an address inside Configuration. This patch
ensures that these functions are compliant when EFI_NOT_FOUND is returned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
According to UEFI spec, the RouteConfig protocol function should populate
the Progress pointer with an address inside Configuration. This patch
ensures that these functions are compliant when EFI_NOT_FOUND is returned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
According to UEFI spec, the RouteConfig protocol function should populate
the Progress pointer with an address inside Configuration. This patch
ensures that these functions are compliant when EFI_NOT_FOUND is returned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
According to UEFI spec, the RouteConfig protocol function should populate
the Progress pointer with an address inside Configuration. This patch
ensures that these functions are compliant when EFI_NOT_FOUND is returned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
inherently python will check string and list for None and having data
if <x> in [None, ''] and similar are superflous.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
BINARY_FILE_TYPE_FW was 'FW'
BINARY_FILE_TYPE_GUID was 'GUID'
BINARY_FILE_TYPE_PREEFORM was 'PREEFORM'
BINARY_FILE_TYPE_UEFI_APP was 'UEFI_APP'
BINARY_FILE_TYPE_UNI_UI was 'UNI_UI'
BINARY_FILE_TYPE_UNI_VER was 'UNI_VER'
BINARY_FILE_TYPE_LIB was 'LIB'
BINARY_FILE_TYPE_PE32 was 'PE32'
BINARY_FILE_TYPE_PIC was 'PIC'
BINARY_FILE_TYPE_PEI_DEPEX was 'PEI_DEPEX'
BINARY_FILE_TYPE_DXE_DEPEX was 'DXE_DEPEX'
BINARY_FILE_TYPE_SMM_DEPEX was 'SMM_DEPEX'
BINARY_FILE_TYPE_TE was 'TE'
BINARY_FILE_TYPE_VER was 'VER'
BINARY_FILE_TYPE_UI was 'UI'
BINARY_FILE_TYPE_BIN was 'BIN'
BINARY_FILE_TYPE_FV was 'FV'
v2 - split apart FV and GUID types with different meanings.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
EDK_COMPONENT_TYPE_LIBRARY was 'LIBRARY'
EDK_COMPONENT_TYPE_SECURITY_CORE was 'SECURITY_CORE'
EDK_COMPONENT_TYPE_COMBINED_PEIM_DRIVER was 'COMBINED_PEIM_DRIVER'
EDK_COMPONENT_TYPE_PIC_PEIM was 'PIC_PEIM'
EDK_COMPONENT_TYPE_RELOCATABLE_PEIM was 'RELOCATABLE_PEIM'
EDK_COMPONENT_TYPE_BS_DRIVER was 'BS_DRIVER'
EDK_COMPONENT_TYPE_RT_DRIVER was 'RT_DRIVER'
EDK_COMPONENT_TYPE_SAL_RT_DRIVER was 'SAL_RT_DRIVER'
EDK_COMPONENT_TYPE_APPLICATION was 'APPLICATION'
v2 - revert 2 files. will update later in own patches.
v3 - fix v2
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
replace raw strings in the code (note: except UPT) with constants.
SUP_MODULE_BASE was 'BASE'
SUP_MODULE_SEC was 'SEC'
SUP_MODULE_PEI_CORE was 'PEI_CORE'
SUP_MODULE_PEIM was 'PEIM'
SUP_MODULE_DXE_CORE was 'DXE_CORE'
SUP_MODULE_DXE_DRIVER was 'DXE_DRIVER'
SUP_MODULE_DXE_RUNTIME_DRIVER was 'DXE_RUNTIME_DRIVER'
SUP_MODULE_DXE_SAL_DRIVER was 'DXE_SAL_DRIVER'
SUP_MODULE_DXE_SMM_DRIVER was 'DXE_SMM_DRIVER'
SUP_MODULE_UEFI_DRIVER was 'UEFI_DRIVER'
SUP_MODULE_UEFI_APPLICATION was 'UEFI_APPLICATION'
SUP_MODULE_USER_DEFINED was 'USER_DEFINED'
SUP_MODULE_SMM_CORE was 'SMM_CORE'
SUP_MODULE_MM_STANDALONE was 'MM_STANDALONE'
SUP_MODULE_MM_CORE_STANDALONE was 'MM_CORE_STANDALONE'
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
make defaultdict to avoid initialize inner items
to empty the dict, call clear instead of making a new object
v2 - to empty the dict, dont re-run constructor, just call .clear()
in post process API also.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
This driver is used to simulate a keyboard. For example, user
could read GPIO setting or data from RAM address. If the value
matches the expected pattern, it could trigger a key pressed
event.
User needs to implement hooks of PLATFORM_VIRTUAL_KBD_PROTOCOL.
There're 4 hooks in this protocol.
Register(): Quote the interface that user needs. For example, user
needs to locate GPIO protocol if he wants to simulate a GPIO value
as a key.
Reset(): Do the initialization before reading value.
Query(): Read value. If the value matches the expected pattern,
trigger a key pressed event.
Clear(): Clean the value if necessary.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.c, the following
functions:
WatchdogWriteOffsetRegister()
WatchdogWriteCompareRegister()
WatchdogEnable()
WatchdogDisable()
provide write access to ARM Generic Watchdog registers and use the values
returned by MmioWrite32() and MmioWrite64() as EFI_STATUS return codes.
Because MmioWriteXY() return the value passed as its write parameter,
Generic Watchdog access functions can spuriously return error codes which
are different from EFI_SUCCESS, e.g. the following call
Status = WatchdogWriteOffsetRegister (MAX_UINT32);
if (EFI_ERROR (Status)) {
return Status;
}
will return MAX_UINT32 defined in MdePkg/Include/Base.h as
#define MAX_UINT32 ((UINT32)0xFFFFFFFF)
This commit declares all the functions listed above as VOID
and removes the code for checking their return values.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Alexei Fedorov <alexei.fedorov@arm.com>
Reviewed-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Port OvmfPkg commit 5c3481b0b6 to ArmVirtPkg. Some explanation should
be in order (because 5c3481b0b6 doesn't offer any):
- The UefiDevicePathLibDevicePathProtocol instance uses the Device Path
Utilities Protocol, produced by DevicePathDxe, for formatting and
parsing the textual device path representation. This allows for a
lighter weight lib instance that gets linked into several DXE modules.
In comparison, the more standalone UefiDevicePathLib instance includes
the formatting and parsing routines in every client module.
- The DXE core needs DevicePathLib before it dispatches DevicePathDxe, so
it needs to stick with the standalone instance.
- DevicePathDxe itself also needs the standalone instance, for
implementing the protocol.
- The DXE-phase PCD driver, "MdeModulePkg/Universal/PCD/Dxe/Pcd.inf",
depends on DevicePathLib via UefiLib and DxeServicesLib at the least; so
with this update, it inherits a dependency on the protocol. In reverse,
DevicePathDxe depends on the PCD Protocol, via PcdLib. The cycle is
broken by using BasePcdLibNull in DevicePathDxe. That restricts it to
FixedAtBuild, Patch, and FeatureFlag PCDs, but that's fine.
Example space savings (using ArmVirtQemu and the GCC5 toolchain):
- NOOPT: 187KB in FVMAIN, 12KB in FVMAIN_COMPACT
- DEBUG: 147KB in FVMAIN, 20KB in FVMAIN_COMPACT
- RELEASE: 123KB in FVMAIN, 17KB in FVMAIN_COMPACT
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=940
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Guests do the same, because the framebuffer is mapped somewhere, which
obviously works with page granularity only.
When not rounding up to full page size we get messages like this one
(linux kernel):
efifb: framebuffer at 0x80000000, using 1876k, total 1875k
^^^^^ ^^^^^
Also sysfb is confused and throws an error:
sysfb: VRAM smaller than advertised
Cc: Phil Dennis-Jordan <phil@philjordan.eu>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: fix coding style]
Remove any concrete OpenSSL version numbers from "OpenSSL-HOWTO.txt". That
information is out of date and there's no reason for us to refresh it:
We now track stable OpenSSL releases via a git submodule. CryptoPkg
maintainers push such submodule updates to edk2 that identify the correct
stable releases of OpenSSL. "OpenSSL-HOWTO.txt" already provides
instructions to users for updating their local submodules.
Cc: Qin Long <qin.long@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Long Qin <qin.long@intel.com>
the function doesn't use self and can be static
defaultdict replaces dict and removes the dict initialization code
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Commit 411a373ed6 ("ArmPkg/TimerDxe: remove workaround for KVM timer
handling") removed the virtual timer handling quirk that cleared the
mask bit in the control register when enabling the timer, under the
assumption that only ancient KVM host implementations required it.
However, Julien reports that Xen also masks the timer interrupt in the
guest view of the timer control register, and therefore needs the same
quirk.
So let's reinstate it, but using a Xen specific implementation of the
timer support library, so that other virt platforms remain unchanged.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Acked-by: Julien Grall <julien.grall@arm.com>
In preparation of selectively reinstating the timer enable quirk for Xen
that we removed in commit 411a373ed6 ("ArmPkg/TimerDxe: remove workaround
for KVM timer handling"), add a ArmGenericTimerReenableTimer() library
function to ArmGenericTimerCounterLib that we will populate for Xen only.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Acked-by: Julien Grall <julien.grall@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=937
In NvmeExpressPassthru.c near line 659:
Prp = NvmeCreatePrpList (
PciIo,
PhyAddr,
EFI_SIZE_TO_PAGES(Offset + Bytes) - 1,
&PrpListHost,
&PrpListNo,
&MapPrpList
);
if (Prp == NULL) {
goto EXIT;
}
Status is not set to an error code - Status is initialized to
EFI_SUCCESS, or set by a PciIo->Map to EFI_SUCCESS above this
code. This error path should set Status to an error code before
goto EXIT.
Change-Id: I8a5cdf981aa609534c205d3676395805ac60a003
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=933
We see UEFI spec is saying to use EfiBootServicesData for ESRT table.
UEFI 2.7 chapter 23.3:
The ESRT shall be stored in memory of type EfiBootServicesData.
And we see EsrtDxe is using AllocatePool for ESRT table, but
EsrtFmpDxe is using AllocateRuntimeZeroPool for ESRT table.
This patch updates code to use EfiBootServicesData for ESRT table
in EsrtFmpDxe.
Change-Id: I72a73e0cc0a37e429cc262d68eb284fb268cb5ef
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Add the new section for HTTPS Boot.
Changes in v2:
- Fixed the typos
- Added the command for p11-kit based on Laszlo's suggestion
- Also added the efisiglist command
- Elaborated how to create the customized cipher suite list
- Mentioned the changes in QEMU in the future based on Laszlo's
suggestion
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: trivial typo fixes; update-crypto-policies URL fix]
This change introduces a new SCMI protocol driver for
Arm systems. The driver currently supports only clock
and performance management protocols. Other protocols
will be added as and when needed.
Clock management protocol is used to configure various clocks
available on the platform e.g. HDLCD clock on the Juno platforms.
Whereas performance management protocol allows adjustment
of various performance domains. Currently this is used to evaluate
performance of the Juno platform.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Upcoming new component ArmPkg/Drivers/ArmScmiDxe is dependent on
platform specific ArmMtlLib library implementation, however in order
to be able to build the ArmScmiDxe component outside of the context of a
particular platform, this change adds Null implementation of the
ArmMtlLib along with ARM MTL library header.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This change adds support for the ARM Mali DP500/DP500/DP650 display
processors using the GOP protocol. It has been tested on FVP base
models + DP550 support. This change adds platform independant LcdHwLib
library. A corresponding platform specific library will be submitted
to edk-platforms/Platform/ARM/VExpressPkg.
This change does not modify functionality provided by PL111 or
HDLCD. This LcdHwLib implementation should be suitable for those
platforms that implement ARM Mali DP500/DP550/DP650 replacing
PL111/HDLCD.
Only graphics layer of the ARM Mali DP is configured for rendering
the RGB/BGR format frame buffer to satisfy the UEFI GOP requirements
Other layers e.g. video layers are not configured.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Currently framebuffer memory is either reserved in special VRAM or
dynamically allocated using boot services memory allocation functions.
When allocated using boot services calls the memory has to be allocated
as EfiBootServicesData. Unfortunately failures have been seen with this
case. There is also an unfortunate lack of control on the placement of
the framebuffer.
This change introduces two PCDs, PcdArmLcdFrameBufferBase and
PcdArmLcdFrameBufferSize which enable build time reservation of the
framebuffer, avoiding the need to allocate dynamically. This allows
the framebuffer to appear as "I/O memory" outside of the normal RAM
map, which is similar to the "VRAM" case.
This change has no impact on current code, only enables the option
of build time reservation of framebuffers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Add definitions for new display modes such as HD 720.
This has no effect on existing display drivers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This change adds a new PCD PcdArmHdlcdSwapBlueRedSelect
to swap values for HDLCD RED_SELECT and BLUE_SELECT registers
on platforms where blue and red hardware lines are swapped.
If set to TRUE in the platform dsc, HDLCD library will swap the values
while setting RED_SELECT and BLUE_SELECT registers. The default
value of the PCD is FALSE.
NOTE: The motive for this is that a discrepancy in the Red/Blue lines
exists between some VersatileExpress platforms. Rather than have
divergent code, this build switch allows a simple, pragmatic solution.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Current HDLCD and PL111 platform libraries do not support display modes
with PixelBlueGreenRedReserved8BitPerColor format, i.e. because of
historical confusion, they do not support the UEFI default
PixelBlueGreenRedReserved8BitPerColor format
In LcdPlatformLib for PL111, LcdPlatformQueryMode returns the pixel
format as PixelRedGreenBlueReserved8BitPerColor which is wrong, because
that does not match the display controller's pixel format which is set
to BGR in PL111Lcd LcdHwLib.
Also it is not possible to configure pixel format as RGB/BGR for the
display modes for a platform at build time.
This change adds PcdGopPixelFormat to configure pixel format as
PixelRedGreenBlueReserved8BitPerColor or
PixelBlueGreenRedReserved8BitPerColor or
PixelBitMask.
With this change, pixel format can be selected in the platform specific
.dsc file for all supported display modes.
Support for PixelBitMask is not implemented in PL111 or HDLCD LcdHwLib
libraries, hence HDLCD and PL111 platform libraries will return error
EFI_UNSUPPORTED if PcdGopPixelFormat is set to PixelBitMask. Indeed,
it is not clear what selecting PixelBitMask might mean, but the option
is allowed as it might suit a custom platform.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The LcdPlatformGetTimings interface function takes similar sets of
multiple parameters for horizontal and vertical timings which can be
aggregated in a common data type. This change defines a structure
SCAN_TIMINGS for this which can be used to describe both horizontal and
vertical scan timings, and accordingly redefines the
LcdPlatformGetTiming interface, greatly reducing the amount of data
passed about.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
LcdIdentify function does not currently check presence of HDLCD
controller.
Implement this functionality by reading HDLCD_REG_VERSION and checking
against the PRODUCT_ID field to detect presence of HDLCD controller.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Currenty bit LcdPwr of the LCDControl register is enabled immediately
after setting other bits of the LCDControl register. This two write
sequence is unnecessary. This change removes this extra write by setting
LcdPwr bit along with other bits of the LcdControl register.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
There is no functional modification in this change
some comments are modified and a few new comments are added.
This is to prevent mixing formatting changes with functional
changes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
There is no functional modification in this change
As preparation for further work, the formatting is corrected to meet
the EDKII coding standard.
Of specific note, some invalid include guards were fixed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This fix changes line endings of LcdPlatformNullLib.c to DOS
style line endings from UNIX style line endings to meet the EDK2
coding standard.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This fix changes line endings of LcdHwNullLib.c to DOS
style line endings from UNIX style line endings to meet the
EDK2 coding standard. Note it also fixes an end of line
whitespace.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This program is provided to allow examination of ACPI table contents
from the UEFI Shell. This can help with investigations, especially at
that stage where the tables are not enabling an OS to boot.
The program is not exhaustive, and only encapsulates detailed knowledge
of a limited number of table types.
Default behaviour is to display the content of all tables installed.
'Known' table types will be parsed and displayed with descriptions and
field values. Where appropriate a degree of consistency checking is
done and errors may be reported in the output.
Other table types will be displayed as an array of Hexadecimal bytes.
To facilitate debugging, the -s and -d options can be used to generate a
binary file image of a table that can be copied elsewhere for
investigation using tools such as those provided by acpica.org. This is
especially relevant for AML type tables like DSDT and SSDT.
The inspiration for this is the existing smbiosview Debug1 Shell
command.
Many tables are not explicitly handled, in part because no examples are
available for our testing.
The program is designed to be extended to new tables with minimal
effort, and contributions are invited.
Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Clean up the leading comment and the prototype of
EfiBootManagerAddLoadOptionVariable():
- the function may modify Option on output, annotate the parameter with
OUT and update the documentation;
- "@retval EFI_STATUS" and "@retval Others" are not idiomatic
documentation, use @return instead;
- sync comment and prototype between lib instance and lib class header.
Change-Id: I8a609d6502b6f8929b2f568acaa147065003b6f4
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
PcdRsa2048Sha256PublicKeyBuffer is referenced but not used in the
library, that makes me a little confusing.
Actually, the PublicKeyData should be from the caller of
AuthenticateFmpImage() as input parameter, for example
EdkiiSystemCapsuleLib.
This patch is to remove the PCD reference in this library instance
to be aligned with FmpAuthenticationLibPkcs7 that does not reference
PcdPkcs7CertBuffer.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Today's implementation only return key state when there is key.
But when user doesn't press any key, the key state cannot be
returned.
The patch changes the ReadKeyStrokeEx() to always return the
key state even there is no key pressed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When we first ported EDK2 to KVM/arm, we implemented a workaround for
the quirky timer handling on the KVM side. This has been fixed in
Linux commit f120cd6533d2 ("KVM: arm/arm64: timer: Allow the timer to
control the active state") dated 23 June 2014, which was incorporated
into Linux release 4.3.
So almost 4 years later, it should be safe to drop this workaround on
the EDK2 side.
This reverts commit b1a633434d.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Within function FatQueueTask(), the traverse of FAT subtasks for
executing the disk read/write is not delete-safe.
For the below case:
FatDiskIo(): When non-blocking access, creates subtasks and creates
event (FatOnAccessComplete, NOTIFY level) when subtasks finish.
FatQueueTask(): Traverses the subtasks and submits them one by one at
Tpl lower than NOTIFY.
Disk R/W completes really quick.
FatOnAccessComplete(): Removes the finished subtask, causing the
traverse in FatQueueTask() broken.
This commits will refine the subtask traverse in FatQueueTask() to be
delete-safe.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
To align the way in MdeModulePkg SerialPortLib and PciSioSerialDxe driver,
Divisor is added by one when the reminder is more than half (16 * BaudRate).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
when comparing a list/string against None and empty, just compare the object.
when comparing against None, dont use !=, ==, <>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
PlatformInitializeConsole() (called by PlatformBootManagerBeforeConsole())
adds elements of "gPlatformConsole" to ConIn / ConOut / ErrOut (as
requested per element) if at boot at least one of ConIn and ConOut doesn't
exist. This typically applies to new VMs, and VMs with freshly recreated
varstores.
Add a USB keyboard wildcard to ConIn via "gPlatformConsole", so that we
not only bind the PS/2 keyboard. (The PS/2 keyboard is added in
PrepareLpcBridgeDevicePath()). Explicitly connecting the USB keyboard is
necessary after commit 245c643cc8.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
We have updated performance infrastructure in previous commits:
between
73fef64f14
and
115eae650b
Update FPDT drivers to collect the performance data reported by
gEdkiiFpdtExtendedFirmwarePerformanceGuid.
The old implementation which collected performance data through
gEfiFirmwarePerformanceGuid is not supported now.
We should add error message to remind user for this unsupported
case in case anyone use it by mistake.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
d69d9227d0 caused system firmware update
failure. It is because FindMatchingFmpHandles() is expected to return
handles matched, but the function returns all handles found.
This patch is to fix the issue.
This patch also assigns mSystemFmpPrivate->Handle for "case 1:" path
in case the Handle is needed by other place in future.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
(https://bugzilla.tianocore.org/show_bug.cgi?id=927)
(V2 Update:
Removing the wrong "--remote" option from git submodule update
command in this commit message. Thanks Laszlo's clarification
to correct this)
Update OpenSSL version to 1.1.0h release (27-Mar-2018) to include the
fix for CVE-2018-0739 issue (Handling of crafted recursive ASN.1
structures can cause a stack overflow and resulting denial of service,
Refer to https://www.openssl.org/news/secadv/20180327.txt for more
information).
Please note "git pull" will not update the submodule repository.
use the following commend to make your existing submodule track this
update:
$ git submodule update --recursive
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Long Qin <qin.long@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
This patch is to drop "--remote" option from the original suggested
submodule update command ("$ git submodule update --recursive
--remote") in HOWTO document.
"--remote" option will integrate changes from the upstream subproject
with the submodules's "current HEAD", instead of using the edk2
superproject's "recorded SHA-1".
It is important here for the edk2 consumers to updating the working
tree of the submodules to match the commit / release tag that the
superproject expects. So removing "--remote" option to fix this
documentation issue here.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Long Qin <qin.long@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Rewrite the TlsSetCipherList() function in order to fix the following
issues:
- Any cipher identifier in CipherId that is not recognized by
TlsGetCipherMapping() will cause the function to return EFI_UNSUPPORTED.
This is a problem because CipherId is an ordered preference list, and a
caller should not get EFI_UNSUPPORTED just because it has an elaborate
CipherId preference list. Instead, we can filter out cipher identifiers
that we don't recognize, as long as we keep the relative order intact.
- CipherString is allocated on the stack, with 500 bytes.
While processing a large CipherId preference list, this room may not be
enough. Although no buffer overflow is possible, CipherString exhaustion
can lead to a failed TLS connection, because any cipher names that don't
fit on CipherString cannot be negotiated.
Compute CipherStringSize first, and allocate CipherString dynamically.
- Finally, the "@STRENGTH" pseudo cipher name is appended to CipherString.
(Assuming there is enough room left in CipherString.) This causes
OpenSSL to sort the cipher list "in order of encryption algorithm key
length".
This is a bad idea. The caller specifically passes an ordered preference
list in CipherId. Therefore TlsSetCipherList() must not ask OpenSSL to
reorder the list, for any reason. Drop "@STRENGTH".
While at it, fix and unify the documentation of the CipherId parameter.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Qin Long <qin.long@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=915
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
"InternalTlsLib.h" includes "BaseCryptLib.h", but the lib class is not
listed in the INF file.
The INF file lists a good number of lib classes, but none of the lib class
headers are included by "InternalTlsLib.h".
Synchronize & sort both lists, while removing those library classes that
aren't actually needed. (IntrinsicLib and OpensslLib have no edk2 class
headers.)
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Qin Long <qin.long@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=915
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
In the next patches, we'll need the lengths of the
TLS_CIPHER_MAPPING.OpensslCipher string fields. These lengths can be
computed at build time; add the new field "OpensslCipherLength", and
introduce the MAP() macro for populating it.
While at it, add some horizontal whitespace to "TlsCipherMappingTable",
and add a comma after the last element. This will come handy in a later
patch.
(The patch does not change the first two columns of
"TlsCipherMappingTable", which can be easily verified with "git show
--word-diff".)
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Qin Long <qin.long@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=915
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
In the following patches it will be useful if the IANA CipherId lookup
returns a pointer to the whole matching IANA-to-OpenSSL mapping structure,
not just the OpenSSL cipher suite name. Rename TLS_CIPHER_PAIR and
TlsGetCipherString() to TLS_CIPHER_MAPPING and TlsGetCipherMapping()
respectively, and make the function return a pointer to
TLS_CIPHER_MAPPING.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Qin Long <qin.long@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=915
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Fix the following style issues:
- "Data" is accessed through a pointer to UINT16 rather than to a pointer
to EFI_TLS_CIPHER. While technically correct, UINT16 is harder to
interpret against the UEFI spec.
- Array subscripting is written with weird *(Pointer + Offset)
expressions, rather than with Pointer[Offset].
- The byte order is converted with HTONS(), while it should be NTOHS().
Either way, use the Data1 and Data2 fields of EFI_TLS_CIPHER instead.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=915
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
TlsSetSessionData() shouldn't just ignore an incomplete EFI_TLS_CIPHER
element at the end of "Data":
- Generally speaking, malformed input for a security API is best rejected
explicitly.
- Specifically speaking, the size of EFI_TLS_CIPHER is 2 bytes. If
DataSize is 1 on input, then the initial check for (DataSize == 0) will
fail, but then TlsSetCipherList() will be called with CipherNum=0.
Return EFI_INVALID_PARAMETER from TlsSetSessionData() if "Data" doesn't
contain a whole number of EFI_TLS_CIPHER elements. While at it, introduce
the dedicated variable CipherCount.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=915
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Read the list of trusted cipher suites from fw_cfg and to store it to
EDKII_HTTP_TLS_CIPHER_LIST_VARIABLE.
The fw_cfg file will be formatted by the "update-crypto-policies" utility
on the host side, so that the host settings take effect in guest HTTPS
boot as well. QEMU forwards the file intact to the firmware. The contents
are forwarded by NetworkPkg/HttpDxe (in TlsConfigCipherList()) to
NetworkPkg/TlsDxe (TlsSetSessionData()) and TlsLib (TlsSetCipherList()).
Note: the development of the "update-crypto-policies" feature is underway
at this time. Meanwhile the following script can be used to generate the
binary file for fw_cfg:
export LC_ALL=C
openssl ciphers -V \
| sed -r -n \
-e 's/^ *0x([0-9A-F]{2}),0x([0-9A-F]{2}) - .*$/\\\\x\1 \\\\x\2/p' \
| xargs -r -- printf -- '%b' > ciphers.bin
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
[lersek@redhat.com: update commit msg and add script as requested by Gary]
[lersek@redhat.com: update commit msg as requested by Jiaxin]
This patch fixes an issue introduced by commit
5b91bf82c6
and
0c9f2cb10b
This issue will only happen if PcdDxeNxMemoryProtectionPolicy is
enabled for reserved memory, which will mark SMM RAM as NX (non-
executable) during DXE core initialization. SMM IPL driver will
unset the NX attribute for SMM RAM to allow loading and running
SMM core/drivers.
But above commit will fail the unset operation of the NX attribute
due to a fact that SMM RAM has zero cache attribute (MRC code always
sets 0 attribute to reserved memory), which will cause GCD internal
method ConverToCpuArchAttributes() to return 0 attribute, which is
taken as invalid CPU paging attribute and skip the calling of
gCpu->SetMemoryAttributes().
The solution is to make use of existing functionality in PiSmmIpl
to make sure one cache attribute is set for SMM RAM. For performance
consideration, PiSmmIpl will always try to set SMM RAM to write-back.
But there's a hole in the code which will fail the setting write-back
attribute because of no corresponding cache capabilities. This patch
will add necessary cache capabilities before setting corresponding
attributes.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Heap Guard feature needs enough memory and paging to work. Otherwise
calling SetMemoryAttributes to change page attribute will fail. This
patch add necessary check of result of calling SetMemoryAttributes.
This can help users to debug their problem in enabling this feature.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Heap Guard feature needs enough memory and paging to work. Otherwise
calling SetMemoryAttributes to change page attribute will fail. This
patch add necessary check of result of calling SetMemoryAttributes.
This can help users to debug their problem in enabling this feature.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This debug message should be info instead of error. This patch is to
change the debug level to DEBUG_INFO.
DEBUG((DEBUG_ERROR, "checking FV....0x%08x - 0x%x\n",
FvHeader, FvHeader->FvLength)); // "Mark"
This comment is inaccurate. This patch is to remove it.
//
// Check section
//
This debug message should be removed as FvHeader may have been out of
range FdStart and FdSize, and the loop will go to "Mark" above again if
FvHeader is not out of range FdStart and FdSize, and then that debug
message will be shown. This patch is to remove this debug message.
DEBUG((DEBUG_ERROR, "Next FV....0x%08x - 0x%x\n",
FvHeader, FvHeader->FvLength));
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Amy Chan <amy.chan@intel.com>
Cc: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In spite of both ArmVirtQemu and ArmVirtQemuKernel formatting the variable
store template at build time, link NvVarStoreFormattedLib into
VariableRuntimeDxe via NULL class resolution on both platforms. This lets
us test the depexes implemented in the previous patches.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
PlatformHasAcpiDtDxe consumes the DynamicHii PCD called
"gArmVirtTokenSpaceGuid.PcdForceNoAcpi". The PcdGetBool() library call
terminates in gRT->GetVariable(), in the MdeModulePkg/Universal/PCD/Dxe
driver. Put "gEfiVariableArchProtocolGuid" on PlatformHasAcpiDtDxe's DEPEX
so that we not attempt the call before the PCD driver can successfully
read non-volatile variables.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The RealTimeClockLib class is declared under EmbeddedPkg, so that
platforms can provide the internals for the
EmbeddedPkg/RealTimeClockRuntimeDxe driver. In turn the driver produces
the Real Time Clock Arch Protocol, without which UEFI drivers cannot be
dispatched.
The PL031RealTimeClockLib instance calls gDS->SetMemorySpaceAttributes()
in the LibRtcInitialize() public function. This DXE service depends on the
CPU Arch Protocol. Add it to the depex.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
NorFlashFvbInitialize() calls gDS->SetMemorySpaceAttributes() to mark the
varstore flash region as uncached. This DXE service depends on the CPU
Architectural protocol, and the DXE core is allowed to return
EFI_NOT_AVAILABLE_YET if it hasn't dispatched ArmPkg/Drivers/CpuDxe
earlier. Make the dependency explicit.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The BEFORE depex opcode that we currently use to force ourselves in front
of the variable driver cannot be combined with other depex opcodes.
Replace the depex with TRUE, and signal NvVarStoreFormattedLib through the
installation of "gEdkiiNvVarStoreFormattedGuid".
Platforms that rely on NorFlashDxe to format the variable store (as
opposed to formatting a variable store template through an FDF file, as
part of the build) should hook NvVarStoreFormattedLib into the variable
drivers they use, so that the latter await our cue.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The lazy initialization of the varstore FVB makes no longer sense at this
point:
- "mNorFlashInstanceTemplate.Initialize" is NULL;
- in NorFlashCreateInstance(), we only set Instance->Initialize to
non-NULL -- namely NorFlashFvbInitialize() -- if the FVB stands for the
variable store (see "ContainVariableStorage" / "SupportFvb");
- we call Instance->Initialize() from three places:
- from NorFlashWriteSingleBlock(), which is too late for the variable
read service ("variable write" depends on "variable read");
- from InitializeFvAndVariableStoreHeaders(), but that is only reachable
from NorFlashFvbInitialize(), i.e. recursively from
Instance->Initialize() itself;
- and from FvbRead(), which is never called by the variable driver, only
by the FTW driver. However, the variable driver may read (not write)
the memory-mapped varstore flash chip before the FTW driver is
dispatched.
Therefore the lazy initialization is both superfluous and insufficient.
Initialize the varstore headers eagerly, before we install the FVB
protocol interface.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Some platforms don't format a variable store template at build time;
instead they format the non-volatile varstore flash chip during boot,
dynamically. Introduce NvVarStoreFormattedLib to enable such platforms to
delay the "variable read" service drivers until the platform specific
module(s) report that the variable store has been formatted.
The platform-specific module that performs the formatting during startup
is usually an FVB or MM FVB driver. Under the proposed scheme, it becomes
responsible for installing gEdkiiNvVarStoreFormattedGuid with a NULL
interface in the protocol database. In turn, the platform DSC will hook
NvVarStoreFormattedLib into the variable service driver, to make the
latter wait for the FVB driver. Platforms that need not delay the variable
service driver like this may still use the same FVB driver;
gEdkiiNvVarStoreFormattedGuid will simply be ignored.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Commit 61a7b0ec63 ("ArmPkg/Gic: force GIC driver to run before CPU arch
protocol driver", 2018-02-06) explains why CpuDxe should be dispatched
after ArmGicDxe.
To implement the ordering, we should use a regular protocol depex rather
than the less flexible AFTER opcode. ArmGicDxe installs
gHardwareInterruptProtocolGuid and gHardwareInterrupt2ProtocolGuid as one
of the last actions on its entry point stack; either of those is OK for
CpuDxe to wait for.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
"ArmGicDxe.inf" currently does not document how the protocols in the
[Protocols] section are used. Such comments help us analyze behavior, so
let's add them now.
- gHardwareInterruptProtocolGuid and gHardwareInterrupt2ProtocolGuid are
always produced on the InterruptDxeInitialize() -> (GicV2DxeInitialize()
| GicV3DxeInitialize()) -> InstallAndRegisterInterruptService() call
path.
- gEfiCpuArchProtocolGuid is consumed in the CpuArchEventProtocolNotify()
protocol notify callback. (Technically this is "conditional"; however
the firmware cannot work without architectural protocols, so we can call
it unconditional.)
While at it, drop the gArmGicDxeFileGuid comment from FILE_GUID; we're
going to make that GUID uninteresting soon.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In a later patch, we'll modify the depex of
"ArmPkg/Drivers/CpuDxe/CpuDxe.inf" (currently "AFTER gArmGicDxeFileGuid")
to "gHardwareInterruptProtocolGuid OR gHardwareInterrupt2ProtocolGuid".
Considering platforms that include "ArmPkg/Drivers/CpuDxe/CpuDxe.inf",
there are two classes:
(1) The platform gets its gHardwareInterruptProtocolGuid or
gHardwareInterrupt2ProtocolGuid instance from
"ArmPkg/Drivers/ArmGic/ArmGicDxe.inf". For such platforms, the
upcoming CpuDxe change is not a problem, because commit 61a7b0ec63
made ArmGicDxe wait for the CPU Arch Protocol with a protocol notify.
(2) The platform gets its hardware interrupt protocol(s) from a different
driver that has a hard depex on the CPU Arch Protocol. The upcoming
CpuDxe change would lead to a loop in the DXE dispatch order.
In the edk2 tree, only "BeagleBoardPkg/BeagleBoardPkg.dsc" falls in class
(2), and the driver in question is "Omap35xxPkg/InterruptDxe". Port (most
of) commit 61a7b0ec63 to it.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
https://bugzilla.tianocore.org/show_bug.cgi?id=928
Uninstall all System FMP Protocols for the current FW device.
If an FMP Protocol for the current FW device is already present,
then install the new System FMP protocol onto the same handle as
the FMP Protocol. Otherwise, install the FMP protocol onto a
new handle.
This supports use cases where multiple capsules for the
same system firmware device are processed on the same
boot of the platform. It guarantees there is at most one
FMP protocol for each system firmware device.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
1. when inf file is binary module, not generate makefile,
so need generate ffs with previous method.
2. generate Ui section maybe override and the string is not
$(MODULE_NAME)
like as:
INF RuleOverride = UI MdeModulePkg/Application/UiApp/UiApp.inf
3. Trim generate incorrect Offset.raw when some vfr not generate .lst
file in Debug directory, Trim get the VFR name with the .c files
replacement.
4. fix some depex file not generate issue
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Issue:
genfds-multi-thread create makefile before section file generation,
so it get alignment is zero from empty file. It is incorrect.
solution:
GenSec get section alignment from input file when the input alignment
is zero.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Roll back the fixed at build pcd collection to include the pcd in
Module and Library.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BLOCK_MMIO_PROTOCOL and BlockMmioToBlockIoDxe were introduced to OvmfPkg
in March 2010, in adjacent commits b0f5144676 and efd82c5794. In the
past eight years, no driver or application seems to have materialized that
produced BLOCK_MMIO_PROTOCOL instances. Meanwhile the UEFI spec has
developed the EFI_RAM_DISK_PROTOCOL, which edk2 implements (and OVMF
includes) as RamDiskDxe.
Rather than fixing issues in the unused BlockMmioToBlockIoDxe driver,
remove the driver, together with the BLOCK_MMIO_PROTOCOL definition that
now becomes unused too.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=926
Reported-by: Steven Shi <steven.shi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
1. use CName format in components section:
[Components]
TestPkg/TestDriver.inf {
<PcdsFixedAtBuild>
PcdToken.PcdName |{GUID(TestGuid)}|VOID*|16
}
2. Use Guid CName format in INF and the Guid is defined in the DEC
file but not write in driver's [Guids] section.
PcdToken.PcdName | {GUID(TestGuid)}
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When the Pcd defined in components section, its value's size is larger
than the value's size in [pcd] section, it cause build error, because
original code use the size get in [pcd] section as max size.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
when multiple driver link same library, and the drivers override the pcd
to different value in the DSC component section, it cause the pcd size
incorrect.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
when driver link library and there have pcd override in DSC component
section, in the library autogen file, the pcd's size is incorrect, the
size value is from DSC [pcd] section, but not from the override pcd
value that in the [component] section.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The case is a FixedAtBuild VOID* PCD is used from a lib, but is set to a
different sized value in a module INF scope <PcdsFixedAtBuild> section.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
FDF format as below:
FILE APPLICATION = PCD(PcdToken.PcdCName) {
}
when parse PCD, need get all PCDs from Platform and Packages,
use self.BuildObject[self.Platform, Arch] get some modules is wrong.
so use self.BuildObject[self.Platform, Arch, TargetName, ToolChainTag]
get all modules.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
switch list to set:
1)we dont care about order
2)we only check for membership.
then remove ".keys()" from dict looping:
allow generators opportunity to optimize
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
The Pcd used in [Components] section, the PCD value is displayed
incorrect in the build report because the PCD default value was not
override.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Pcds in Conditional Directives and Pcds not used are Platform Level
info, it should not display in Module PCD Section.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
by changing from list to set(), we can skip all the preprocessing
to prevent duplication and we dont need to convert to a set() later
on for each use
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
we initialize this dict and then check it's contents, but never add items.
we can remove it without any effect.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
This patch fixes an issue with VlvTbltDevicePkg introduced
by commit 5b91bf82c6.
The history is as below.
To support heap guard feature, 14dde9e903
added support for SetMemorySpaceAttributes() to handle page attributes,
but after that, a combination of CPU arch attributes and other attributes
was not allowed anymore, for example, UC + RUNTIME. It is a regression.
Then 5b91bf82c6 was to fix the regression,
and we thought 0 CPU arch attributes may be used to clear CPU arch
attributes, so 0 CPU arch attributes was allowed to be sent to
gCpu->SetMemoryAttributes().
But some implementation of CPU driver may return error for 0 CPU arch
attributes. That fails the case that caller just calls
SetMemorySpaceAttributes() with none CPU arch attributes (for example,
RUNTIME), and the purpose of the case is not to clear CPU arch attributes.
This patch filters the call to gCpu->SetMemoryAttributes()
if the requested attributes is 0. It also removes the #define
INVALID_CPU_ARCH_ATTRIBUTES that is no longer used.
Cc: Heyi Guo <heyi.guo@linaro.org>
Cc: Yi Li <phoenix.liyi@huawei.com>
Cc: Renhao Liang <liangrenhao@huawei.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
NASM introduced FXSAVE / FXRSTOR support in commit 900fa5b26b8f ("NASM
0.98p3-hpa", 2002-04-30), which commit stands for the nasm-0.98p3-hpa
release.
NASM introduced FXSAVE64 / FXRSTOR64 support in commit 3a014348ca15
("insns: add FXSAVE64/FXRSTOR64, drop np prefix", 2010-07-07), which was
part of the "nasm-2.09" release.
Edk2 requires nasm-2.10 or later for use with the GCC toolchain family,
and nasm-2.12.01 or later for use with all other toolchain families.
Replace the binary encoding of the FXSAVE(64)/FXRSTOR(64) instructions
with mnemonics.
I verified that the "Ia32/SmiException.obj", "X64/SmiEntry.obj" and
"X64/SmiException.obj" files are rebuilt after this patch, without any
change in content.
This patch removes the last instructions encoded with DBs from
PiSmmCpuDxeSmm.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(1) SmmRelocationSemaphoreComplete32() runs in 32-bit mode, so wrap it in
a (BITS 32 ... BITS 64) bracket.
(2) SmmRelocationSemaphoreComplete32() currently compiles to:
> 000002AE C6050000000001 mov byte [dword 0x0],0x1
> 000002B5 FF2500000000 jmp dword [dword 0x0]
where the first instruction is patched with the contents of
"mRebasedFlag" (so that (*mRebasedFlag) is set to 1), and the second
instruction is patched with the address of
"mSmmRelocationOriginalAddress" (so that we jump to
"mSmmRelocationOriginalAddress").
In its current form the first instruction could not be patched with
PatchInstructionX86(), given that the operand to patch is not encoded
in the trailing bytes of the instruction. Therefore, adopt an
EAX-based version, inspired by both the IA32 and X64 variants of
SmmRelocationSemaphoreComplete():
> 000002AE 50 push eax
> 000002AF B800000000 mov eax,0x0
> 000002B4 C60001 mov byte [eax],0x1
> 000002B7 58 pop eax
> 000002B8 FF2500000000 jmp dword [dword 0x0]
Here both instructions can be patched with PatchInstructionX86(), and
the DBs can be replaced with native NASM syntax.
(3) Turn the "mRebasedFlagAddr32" and "mSmmRelocationOriginalAddressPtr32"
variables into markers that suit PatchInstructionX86().
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Rename the variable to "gPatchSmmInitStack" so that its association with
PatchInstructionX86() is clear from the declaration, change its type to
X86_ASSEMBLY_PATCH_LABEL, and patch it with PatchInstructionX86(). This
lets us remove the binary (DB) encoding of some instructions in
"SmmInit.nasm".
The size of the patched source operand is (sizeof (UINTN)).
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The IA32 version of "SmmInit.nasm" does not need "gSmmJmpAddr" at all (its
PiSmmCpuSmmInitFixupAddress() variant doesn't do anything either). We can
simply use the NASM syntax for the following Mixed-Size Jump:
> jmp PROTECT_MODE_CS : dword @32bit
The generated object code for the instruction is unchanged:
> 00000182 66EA5A0000000800 jmp dword 0x8:0x5a
(The NASM manual explains that putting the DWORD prefix after the colon
":" reflects the intent better, since it is the offset that is a DWORD.
Thus, that's what I used. However, both syntaxes are interchangeable,
hence the ndisasm output.)
The X64 version of "SmmInit.nasm" appears to require "gSmmJmpAddr";
however that's accidental, not inherent:
- Bring LONG_MODE_CODE_SEGMENT from
"UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h" to "SmmInit.nasm" as
LONG_MODE_CS, same as PROTECT_MODE_CODE_SEGMENT was brought to the IA32
version as PROTECT_MODE_CS earlier.
- Apply the NASM-native Mixed-Size Jump syntax again, but jump to the
fixed zero offset in LONG_MODE_CS. This will produce no relocation
record at all. Add a label after the instruction.
- Modify PiSmmCpuSmmInitFixupAddress() to patch the jump target backwards
from the label. Because we modify the DWORD offset with a DWORD access,
the segment selector is unharmed in the instruction, and we need not set
it from PiCpuSmmEntry().
According to "objdump --reloc", the X64 version undergoes only the
following relocations, after this patch:
> RELOCATION RECORDS FOR [.text]:
> OFFSET TYPE VALUE
> 0000000000000095 R_X86_64_PC32 SmmInitHandler-0x0000000000000004
> 00000000000000e0 R_X86_64_PC32 mRebasedFlag-0x0000000000000004
> 00000000000000ea R_X86_64_PC32 mSmmRelocationOriginalAddress-0x0000000000000004
Therefore the patch does not regress
<https://bugzilla.tianocore.org/show_bug.cgi?id=849> ("Enable XCODE5 tool
chain for UefiCpuPkg with nasm source code").
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Like "gSmmCr4" in the previous patch, "gSmmCr0" is not only used for
machine code patching, but also as a means to communicate the initial CR0
value from SmmRelocateBases() to InitSmmS3ResumeState(). In other words,
the last four bytes of the "mov eax, Cr0Value" instruction's binary
representation are utilized as normal data too.
In order to get rid of the DB for "mov eax, Cr0Value", we have to split
both roles, patching and data flow. Introduce the "mSmmCr0" global (SMRAM)
variable for the data flow purpose. Rename the "gSmmCr0" variable to
"gPatchSmmCr0" so that its association with PatchInstructionX86() is clear
from the declaration, change its type to X86_ASSEMBLY_PATCH_LABEL, and
patch it with PatchInstructionX86(), to the value now contained in
"mSmmCr0".
This lets us remove the binary (DB) encoding of "mov eax, Cr0Value" in
"SmmInit.nasm".
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Unlike "gSmmCr3" in the previous patch, "gSmmCr4" is not only used for
machine code patching, but also as a means to communicate the initial CR4
value from SmmRelocateBases() to InitSmmS3ResumeState(). In other words,
the last four bytes of the "mov eax, Cr4Value" instruction's binary
representation are utilized as normal data too.
In order to get rid of the DB for "mov eax, Cr4Value", we have to split
both roles, patching and data flow. Introduce the "mSmmCr4" global (SMRAM)
variable for the data flow purpose. Rename the "gSmmCr4" variable to
"gPatchSmmCr4" so that its association with PatchInstructionX86() is clear
from the declaration, change its type to X86_ASSEMBLY_PATCH_LABEL, and
patch it with PatchInstructionX86(), to the value now contained in
"mSmmCr4".
This lets us remove the binary (DB) encoding of "mov eax, Cr4Value" in
"SmmInit.nasm".
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Rename the variable to "gPatchSmmCr3" so that its association with
PatchInstructionX86() is clear from the declaration, change its type to
X86_ASSEMBLY_PATCH_LABEL, and patch it with PatchInstructionX86(). This
lets us remove the binary (DB) encoding of some instructions in
"SmmInit.nasm".
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(This patch is the 64-bit variant of commit e75ee97224,
"UefiCpuPkg/PiSmmCpuDxeSmm: remove unneeded DBs from IA32 SmmStartup()",
2018-01-31.)
The SmmStartup() function executes in SMM, which is very similar to real
mode. Add "BITS 16" before it and "BITS 64" after it (just before the
@LongMode label).
Remove the manual 0x66 operand-size override prefixes, for selecting
32-bit operands -- the sizes of our operands trigger NASM to insert the
prefixes automatically in almost every spot. The one place where we have
to add it back manually is the LGDT instruction. In the LGDT instruction
we also replace the binary 0x2E prefix with the normal NASM syntax for CS
segment override.
The stores to the Control Registers were always 32-bit wide; the source
code only used RAX as source operand because it generated the expected
object code (with NASM compiling the source as if in BITS 64). With BITS
16 added, we can use the actual register width in the source operands
(EAX).
This patch causes NASM to generate byte-identical object code (determined
by disassembling both the pre-patch and post-patch versions, and comparing
the listings), except:
> @@ -231,7 +231,7 @@
> 000001D2 6689D3 mov ebx,edx
> 000001D5 66B800000000 mov eax,0x0
> 000001DB 0F22D8 mov cr3,eax
> -000001DE 662E670F0155F6 o32 lgdt [cs:ebp-0xa]
> +000001DE 2E66670F0155F6 o32 lgdt [cs:ebp-0xa]
> 000001E5 66B800000000 mov eax,0x0
> 000001EB 80CC02 or ah,0x2
> 000001EE 0F22E0 mov cr4,eax
The only difference is the prefix list order, it changes from:
- 0x66, 0x2E, 0x67
to
- 0x2E, 0x66, 0x67
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
"mXdSupported" is a global BOOLEAN variable, initialized to TRUE. The
CheckFeatureSupported() function is executed on all processors (not
concurrently though), called from SmmInitHandler(). If XD support is found
to be missing on any CPU, then "mXdSupported" is set to FALSE, and further
processors omit the check. Afterwards, "mXdSupported" is read by several
assembly and C code locations.
The tricky part is *where* "mXdSupported" is allocated (defined):
- Before commit 717fb60443 ("UefiCpuPkg/PiSmmCpuDxeSmm: Add paging
protection.", 2016-11-17), it used to be a normal global variable,
defined (allocated) in "SmmProfile.c".
- With said commit, we moved the definition (allocation) of "mXdSupported"
into "SmiEntry.nasm". The variable was defined over the last byte of a
"mov al, 1" instruction, so that setting it to FALSE in
CheckFeatureSupported() would patch the instruction to "mov al, 0". The
subsequent conditional jump would change behavior, plus all further read
references to "mXdSupported" (in C and assembly code) would read back
the source (imm8) operand of the patched MOV instruction as data.
This trick required that the MOV instruction be encoded with DB.
In order to get rid of the DB, we have to split both roles: we need a
label for the code patching, and "mXdSupported" has to be defined
(allocated) independently of the code patching. Of course, their values
must always remain in sync.
(1) Reinstate the "mXdSupported" definition and initialization in
"SmmProfile.c" from before commit 717fb60443. Change the assembly
language definition ("global") to a declaration ("extern").
(2) Define the "gPatchXdSupported" label (type X86_ASSEMBLY_PATCH_LABEL)
in "SmiEntry.nasm", and add the C-language declaration to
"SmmProfileInternal.h". Replace the DB with the MOV mnemonic (keeping
the imm8 source operand with value 1).
(3) In CheckFeatureSupported(), whenever "mXdSupported" is set to FALSE,
patch the assembly code in sync, with PatchInstructionX86().
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Rename the variable to "gPatchSmiCr3" so that its association with
PatchInstructionX86() is clear from the declaration, change its type to
X86_ASSEMBLY_PATCH_LABEL, and patch it with PatchInstructionX86(). This
lets us remove the binary (DB) encoding of some instructions in
"SmiEntry.nasm".
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Rename the variable to "gPatchSmiStack" so that its association with
PatchInstructionX86() is clear from the declaration. Also change its type
to X86_ASSEMBLY_PATCH_LABEL.
Unlike "gSmbase" in the previous patch, "gSmiStack"'s patched value is
also de-referenced by C code (in other words, it is read back after
patching): the InstallSmiHandler() function stores "CpuIndex" to the given
CPU's SMI stack through "gSmiStack". Introduce the local variable
"CpuSmiStack" in InstallSmiHandler() for calculating the stack location
separately, then use this variable for both patching into the assembly
code, and for storing "CpuIndex" through it.
It's assumed that "volatile" stood in the declaration of "gSmiStack"
because we used to read "gSmiStack" back for de-referencing; with that use
gone, we can remove "volatile" too. (Note that the *target* of the pointer
was never volatile-qualified.)
Finally, replace the binary (DB) encoding of "mov esp, imm32" in
"SmiEntry.nasm".
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Rename the variable to "gPatchSmbase" so that its association with
PatchInstructionX86() is clear from the declaration, change its type to
X86_ASSEMBLY_PATCH_LABEL, and patch it with PatchInstructionX86(). This
lets us remove the binary (DB) encoding of some instructions in
"SmiEntry.nasm".
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
"#endif" preprocessing directives near the top of "BaseLib.h" helpfully
repeat the preprocessing conditions from their matching "#if", "#ifdef",
and "#ifndef" directives. This practice has been less followed recently;
supplement the missing comments.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. Fix some "support" to "supported".
2. Fix some "set" to "clear" in ClearMemoryAttributes interface.
3. Remove redundant comments for GetMemoryAttributes interface.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
For gDS->SetMemorySpaceAttributes(), when user passes a combined
memory attribute including CPU arch attribute and other attributes,
like EFI_MEMORY_RUNTIME, ConverToCpuArchAttributes() will return
INVALID_CPU_ARCH_ATTRIBUTES and skip setting page/cache attribute for
the specified memory space.
We don't see any reason to forbid combining CPU arch attributes and
non-CPU-arch attributes when calling gDS->SetMemorySpaceAttributes(),
so we remove the check code in ConverToCpuArchAttributes(); the
remaining code is enough to grab the interested bits for
Cpu->SetMemoryAttributes().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Yi Li <phoenix.liyi@huawei.com>
Signed-off-by: Renhao Liang <liangrenhao@huawei.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Introduce TlsAuthConfigLib to read the list of trusted CA certificates
from fw_cfg and to store it to EFI_TLS_CA_CERTIFICATE_VARIABLE.
The fw_cfg file is formatted by the "p11-kit" and "update-ca-trust"
utilities on the host side, so that the host settings take effect in guest
HTTPS boot as well. QEMU forwards the file intact to the firmware. The
contents are sanity-checked by NetworkPkg/HttpDxe code that was added in
commit 0fd13678a6.
Link TlsAuthConfigLib via NULL resolution into TlsAuthConfigDxe. This sets
EFI_TLS_CA_CERTIFICATE_VARIABLE in time for both
NetworkPkg/TlsAuthConfigDxe (for possible HII interaction with the user)
and for NetworkPkg/HttpDxe (for the effective TLS configuration).
The file formatted by "p11-kit" can be large. On a RHEL-7 host, the the
Mozilla CA root certificate bundle -- installed with the "ca-certificates"
package -- is processed into a 182KB file. Thus, create
EFI_TLS_CA_CERTIFICATE_VARIABLE as a volatile & boot-time only variable.
Also, in TLS_ENABLE builds, set the cumulative limit for volatile
variables (PcdVariableStoreSize) to 512KB, and the individual limit for
the same (PcdMaxVolatileVariableSize) to 256KB.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In commit 62f43f7c19, we set PcdVariableStoreSize to the same value as
PcdFlashNvStorageVariableSize (which in turn comes from VARS_LIVE_SIZE in
"OvmfPkg.fdf.inc").
This equality between both PCDs is a false requirement from
EmuVariableFvbRuntimeDxe. FVB drivers should use
PcdFlashNvStorageVariableSize for supporting non-volatile variables (even
if they happen to be kept in RAM only), along the other PcdFlashNvStorage*
PCDs. Whereas PcdVariableStoreSize is for variables that are volatile at
the gRT->SetVariable() / gRT->GetVariable() API level.
(PlatformPei too bases the preallocation for EmuVariableFvbRuntimeDxe on
PcdFlashNvStorageFtwSpareSize.)
Replace PcdVariableStoreSize in EmuVariableFvbRuntimeDxe with the
same-value PcdFlashNvStorageVariableSize. This means no change in
behavior, and it allows us to increase PcdVariableStoreSize in a later
patch without disturbing EmuVariableFvbRuntimeDxe (or PlatformPei).
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The variable driver doesn't distinguish "non-volatile non-authenticated"
variables from "volatile non-authenticated" variables, when checking
individual variable sizes against the permitted maximum.
PcdMaxVariableSize covers both kinds.
This prevents volatile non-authenticated variables from carrying large
data between UEFI drivers, despite having no flash impact. One example is
EFI_TLS_CA_CERTIFICATE_VARIABLE, which platforms might want to create as
volatile on every boot: the certificate list can be several hundred KB in
size.
Introduce PcdMaxVolatileVariableSize to represent the limit on individual
volatile non-authenticated variables. The default value is zero, which
makes Variable/RuntimeDxe fall back to PcdMaxVariableSize (i.e. the
current behavior). This is similar to the PcdMaxAuthVariableSize fallback.
Whenever the size limit is enforced, consult MaxVolatileVariableSize as
the last option, after checking
- MaxAuthVariableSize for VARIABLE_ATTRIBUTE_AT_AW,
- and MaxVariableSize for EFI_VARIABLE_NON_VOLATILE.
EFI_VARIABLE_HARDWARE_ERROR_RECORD is always handled separately; it always
takes priority over the three cases listed above.
Introduce the GetMaxVariableSize() helper to consider
PcdMaxVolatileVariableSize, in addition to
GetNonVolatileMaxVariableSize(). GetNonVolatileMaxVariableSize() is
currently called at three sites, and two of those need to start using
GetMaxVariableSize() instead:
- VariableServiceInitialize() [VariableSmm.c]: the SMM comms buffer must
accommodate all kinds of variables,
- VariableCommonInitialize() [Variable.c]: the preallocated scratch space
must also accommodate all kinds of variables,
- InitNonVolatileVariableStore() [Variable.c] can continue using
GetNonVolatileMaxVariableSize().
Don't modify the ReclaimForOS() function as it is specific to non-volatile
variables and should ignore PcdMaxVolatileVariableSize.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
Tested-by: Gary Lin <glin@suse.com>
[lersek@redhat.com: set MaxVolatileVariableSize where Star suggested]
Reviewed-by: Star Zeng <star.zeng@intel.com>
VariableRuntimeDxe will have OnEndOfDxe() callback function at
TPL_NOTIFY level on EndOfDxe event when DXE variable solution is
used.
Status = gBS->CreateEventEx (
EVT_NOTIFY_SIGNAL,
TPL_NOTIFY,
OnEndOfDxe,
NULL,
&gEfiEndOfDxeEventGroupGuid,
&EndOfDxeEvent
);
VariableSmm will have SmmEndOfDxeCallback() callback function at
TPL_CALLBACK level on SmmEndOfDxe event when SMM variable solution
is used.
SmmIplGuidedEventNotify() - PiSmmIpl.c TPL_CALLBACK on EndOfDxe
->
SmmEndOfDxeHandler() - PiSmmCore.c install SmmEndOfDxe protocol
->
SmmEndOfDxeCallback() - VariableSmm.c
The TPL level for (Smm)EndOfDxe callback between VariableRuntimeDxe
and VariableSmm is inconsistent, it will make the unified platform
code could not make sure its TPL_NOTIFY EndOfDxe callback function
(to use variable lock/check) executed before (Smm)EndOfDxe callback
function in variable driver. The variable lock/check will start to
protect after (Smm)EndOfDxe callback function in variable driver is
executed.
This patch is to algin the TPL level to TPL_CALLBACK for (Smm)EndOfDxe
callback between VariableRuntimeDxe and VariableSmm.
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
build report error when the same Guid value in FDF file use lowercase,
in tools_def.txt file use uppercase.
The guid value's compare should not case-sensitive.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bin Wang <binx.a.wang@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Add the partition type GUID for every partition to the installed handle,
this is required per the UEFI specification.
"The firmware must add the PartitionTypeGuid to the handle of every
active GPT partition using EFI_BOOT_SERVICES.InstallProtocolInterface()."
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen.qdt@qualcommdatacenter.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
move hex character info from GUID expressions into seperate variable to
facilitate reuse.
I had a type with insufficient {} in the first version.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=890
There are use cases where a VOID * PCD needs to be generated from multiple
binary input files. This can be in the form of an array of fixed size
elements or a set of variable sized elements.
Update BinToPcd to support multiple one or more -i INPUTFILE arguments.
By default, the contents of each binary input file are concatenated in
the order provided. This supports generating a PCD that is an array of
fixed size elements
Add -x, --xdr flags to BinToPcd to encodes the PCD using the
Variable-Length Opaque Data of RFC 4506 External Data Representation
Standard (XDR).
https://tools.ietf.org/html/rfc4506https://tools.ietf.org/html/rfc4506#section-4.10
The data format from RFC 4506 meets the requirements for a PCD that is a
set of variable sized elements in the Variable-Length Opaque Data format.
The overhead of this format is a 32-bit length and 0 to 3 bytes of padding
to align the next element at a 32-bit boundary.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
If the platform creates the "TlsCaCertificate" variable as volatile, then
EnrollX509toVariable() shouldn't fail to extend it just because
TLS_AUTH_CONFIG_VAR_BASE_ATTR contains the EFI_VARIABLE_NON_VOLATILE
attribute.
Thus, if the variable exists, add the EFI_VARIABLE_APPEND_WRITE attribute
to the variable's current attributes. This is what DeleteCert() does
already.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
In TlsConfigCertificate(), make sure that the set of EFI_SIGNATURE_LIST
objects that the platform stored to "TlsCaCertificate" is well-formed.
In addition, because HttpInstance->TlsConfiguration->SetData() expects
X509 certificates only, ensure that the EFI_SIGNATURE_LIST objects only
report X509 certificates, as described under EFI_CERT_X509_GUID in the
UEFI-2.7 spec.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=909
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
For TlsConfigureSession(), it makes sense to exempt EFI_NOT_FOUND from
TlsConfigCipherList() / gRT->GetVariable(), because there is a default
cipher list (SSL_DEFAULT_CIPHER_LIST) we can fall back to.
The same is not true of TlsConfigCertificate(), because there is no
default CA cert list. The platform (or the user of the Setup utility) is
required to configure a CA cert list first.
Remove the misleading comment and status code mapping in
TlsConfigCertificate().
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Introduce a FreeCACert label near the end of the function, so that we can
keep the FreePool(CACert) statement centralized for error and success
exits.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
The string "HTTPClient" has 10 non-NUL characters; the value 9 is a
copy-paste leftover from "PXEClient". Check for all 10 characters in the
vendor-class-identifier option when determining whether the DHCP offer is
an HTTP offer.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Initialize local variable to suppress warning C4701/C4703:
potentially uninitialized local variable/pointer variable.
1.In VirtualMemory.c:
Read of "PageMapLevel4Entry" in SetMemoryEncDe() is only
reached when "PageMapLevel4Entry" is got correctly.
2.In VirtioBlk.c:
Reads (dereferences) of "BufferMapping" and "BufferDeviceAddress"
in SynchronousRequest() are only reached if "BufferSize > 0" *and*
we map the data buffer successfully.
3.In VirtioScsi.c:
Reads (dereferences) of "InDataMapping" and "InDataDeviceAddress",
in VirtioScsiPassThru() are only reached if
"Packet->InTransferLength > 0" on input, *and* we map the
input buffer successfully. The similar reason for "OutDataMapping"
and "OutDataDeviceAddress".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
sha256 is not the standard option. It should be replaced by sha -sha256.
Otherwise, it doesn't work in MAC OS.
In V2, update the option to sha1 -sha256.
In late openssl version >= 1.1, there is no sha option, but has sha1,sha256.
In previous openssl version < 1.1, there is no sha256, but has sha,sha1.
To work with all openssl version, use sha1 -sha256 for it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liao Jui-peng <jui-pengx.liao@intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Add a new exception support for the checkPoint of no use C type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Booting from USB may fail while the macro USB_BOOT_IO_BLOCKS
set to 128 because the block size of some USB devices are exceeded
512, like some virtual CD-ROM from BMC, the block size is 2048.
So,the count blocks to transfer should be calculated by block
size of the USB devices.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <ming.huang@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Commit 5563281fa2
* ShellPkg/[hex]edit: use SimpleTextInEx to read console
changes shell edit and hexedit to read input through SimpleTextInEx.
It exposes a issue in UsbKeyboard driver:
Per UEFI Spec,
When interpreting the data from this function (ReadKeyStrokeEx), it
should be noted that if a class of printable characters that are
normally adjusted by shift modifiers (e.g. Shift Key + "f" key) would
be presented solely as a KeyData.Key.UnicodeChar without the
associated shift state. So in the previous example of a Shift Key +
"f" key being pressed, the only pertinent data returned would be
KeyData.Key.UnicodeChar with the value of "F".
UsbKeyboard driver does convert Shift Key + "f" to "F" without the
shift state. But it doesn't do the conversion for all printable
characters, e.g.: Shift Key + "1" --> "!".
The root cause is today's logic to check whether a character is
printable or not is as below:
if ((KeyDescriptor->AffectedAttribute & EFI_AFFECTED_BY_CAPS_LOCK)
!= 0) {
So it only converts Shift + "a"-"z", but doesn't for Shift + "0"-"9",
and Shift + "["...
The patch updates the check logic as below to fix the issue:
if ((KeyDescriptor->Unicode != CHAR_NULL) &&
(KeyDescriptor->ShiftedUnicode != CHAR_NULL) &&
(KeyDescriptor->Unicode != KeyDescriptor->ShiftedUnicode)) {
The above check is TRUE when the character is printable and
it's *really* affected by Shift key.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
If there is no dynamic pcds, there should be DB header
in the Pcd DataBase.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
After completed a DHCP D.O.R.A process and got the new address, the ARP Instance
and RouteTable should be configured so as to avoid the later Pxe.Arp failure.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Utilities written in Python may depend on external (preinstalled) Python
packages; for example, Ecc depends on "antlr_python_runtime-3.0.1". Such
packages need not be installed system-wide, as long as they are reachable
through PYTHONPATH. Therefore we shouldn't overwrite the user's PYTHONPATH
with "BaseTools/Source/Python"; instead, we should prepend the latter to
the former.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=896
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
TPM2.0 command lib always assumes TPM device and transmission channel can
respond correctly. But it is not true when communication channel is exploited
and wrong data is spoofed. Add more logic to prohibit memory overflow attack.
Cc: Long Qin <qin.long@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
use ''.format instead of eval() and use some list comprehension for making list
delete some unused variables
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
remove COMPATIBLE_STRING_TOKEN as it is the same as STRING_TOKEN
remove if statement that used one or the other (identical) re
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Current code will generate maxsize for HII type PCD when parser DSC
file, while this HII type PCD value maybe override in build command
per --pcd option, so the max size need re-calculate.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch adds maintainers, reviewer and directory for the
StandaloneMmPkg. This package will host an implementation of Standalone
Management Mode as specified in the Platform Initialization (PI)
Specification, Volume 4: Management Mode Core Interface.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Reviewed-by: Jiewen.yao@intel.com
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
When source level debug is enabled, but debug cable is not connected,
XhcResetHC() in XhciReg.c will reset the host controller, the debug
capability registers will be also reset. After the code in
InitializeUsbDebugHardware() sets DCE bit and LSE bit to "1" in DCCTRL,
there will be DMA on 0 (the value of some debug capability registers
for data transfer is 0) address buffer, fault info like below will
appear when IOMMU based on VTd is enabled.
VER_REG - 0x00000010
CAP_REG - 0x00D2008C40660462
ECAP_REG - 0x0000000000F050DA
GSTS_REG - 0xC0000000
RTADDR_REG - 0x0000000086512000
CCMD_REG - 0x2800000000000000
FSTS_REG - 0x00000002
FECTL_REG - 0xC0000000
FEDATA_REG - 0x00000000
FEADDR_REG - 0x00000000
FEUADDR_REG - 0x00000000
FRCD_REG[0] - 0xC0000006000000A0 0000000000000000
Fault Info - 0x0000000000000000
Source - B00 D14 F00
Type - 1 (read)
Reason - 6
IVA_REG - 0x0000000000000000
IOTLB_REG - 0x1200000000000000
This patch is to return error for the case.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
when VOID* type non-structure pcd used in --pcd, and its max size is not
specified in DSC or its value is hex value, build break due to the code
int(Pcd.MaxDatumSize,10).
Now this patch remove this code, because tool will calculate the size
info in later phase.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
when only define the PCD in the DEC file, and use --pcd feature,
we also need cover this case for Feature Flag Type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Within function CoreExitBootServices(), this commit will move the call
of:
MemoryProtectionExitBootServicesCallback();
before:
SaveAndSetDebugTimerInterrupt (FALSE);
and
gCpu->DisableInterrupt (gCpu);
The reason is that, within MemoryProtectionExitBootServicesCallback(),
APIs like RaiseTpl and RestoreTpl maybe called. An example will be:
DebugLib (using PeiDxeDebugLibReportStatusCode instance)
|
v
ReportStatusCodeLib (using DxeReportStatusCodeLib instance)
|
v
Raise/RestoreTpl
The call of Raise/RestoreTpl APIs will re-enable BSP interrupts. Hence,
this commit refine the calling sequence to ensure BSP interrupts before
leaving CoreExitBootServices().
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Within function ApWakeupFunction():
When source level debugger is enabled, AP interrupts will be enabled by
EnableDebugAgent(). Then the AP function will be executed by:
Procedure (Parameter);
After the AP function returns, AP interrupts will be disabled when the
APs are placed in loop mode (both HltLoop and MwaiLoop).
However, at ExitBootServices, ApWakeupFunction() is called with
'Procedure' equals to RelocateApLoop().
(ExitBootServices callback registered within InitMpGlobalData())
RelocateApLoop() never returns, so it has to disable the AP interrupts by
itself. However, we find that interrupts are only disabled for the
HltLoop case, but not for the MwaitLoop case (within file MpFuncs.nasm).
This commit adds the missing disabling of AP interrupts for MwaitLoop.
Also, for X64, this commit will disable the interrupts before switching to
32-bit mode.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Build options for ARM64 are the same as for ARM, except for /BASE:0
which is removed from DLINK flags to avoid LNK1355 error:
invalid base address 0x0; ARM64 image cannot have base address below 4GB
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Liming Gao <liming.gao@intel.com>
We need to explicitly call the built-in __va_start() for ARM64, otherwise
the variable parameters are not properly enqueued for the next function
calls.
Also do the same for ARM, as as it doesn't harm us.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Liming Gao <liming.gao@intel.com>
We disable the exact same warnings as IA32 and X64.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Liming Gao <liming.gao@intel.com>
since the first character of the string cannot be found by multiple if
statements, use elif to optomize the behavior.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Option --hash --binary-destination generate Binaries section in
the inf file, but the path of ASL file is begin with
Output directory, so need replace Output directory with '',
will get the file name RamDisk.aml
Incorrect AML file path in inf file on linux:
[Binaries.X64]
PE32|RamDiskDxe.efi
ASL|home/tiano/Desktop/hash/edk2/Build/OvmfX64/RELEASE_GCC5/X64
/MdeModulePkg/Universal/Disk/RamDiskDxe/RamDiskDxe/OUTPUT/RamDisk.aml
DXE_DEPEX|RamDiskDxe.depex
BIN|RamDiskDxeOffset.bin
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Current code uses string length as BufferSize input to UnicodeSPrint,
it is wrong and makes the pop up string trimmed. The BufferSize input
to UnicodeSPrint should be the size, in bytes, of the output buffer.
This is to use sizeof (mPopUpString) as the BufferSize input to
UnicodeSPrint, it also updates array size of mPopUpString from 256 to
100 that is enough, otherwise the pop up string may be too long.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This improves the UEFI boot time for VMs that have "-kernel", many disks
or NICs, and no "bootindex" properties.
(Unlike in ArmVirt commit 23d04b58e2, in OvmfPkg commit 52fba28994 we
introduced TryRunningQemuKernel() right from the start *after*
BdsLibConnectAll(). Therefore, unlike in patch
'ArmVirtPkg/PlatformBootManagerLib: return to "-kernel before boot
devices"', we adopt the logic as new in this patch.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Gabriel Somlo <gsomlo@gmail.com>
PlatformBootManagerAfterConsole()
<--------------------------------+
PlatformBdsConnectSequence() |
ConnectDevicesFromQemu() / EfiBootManagerConnectAll() |
PciAcpiInitialization() ---------------------------------+
TryRunningQemuKernel()
Functionally this is a no-op:
- PciAcpiInitialization() iterates over PciIo protocol instances, which
are available just the same at the new call site.
- The PCI interrupt line register exists only to inform system software
(it doesn't affect hardware) and UEFI drivers don't use PCI interrupts
anyway.
(More background in commits 2e70cf8ade and 5218c27950c4.)
This change will let us move TryRunningQemuKernel() between
PciAcpiInitialization() and PlatformBdsConnectSequence() in the next
patch.
Cc: "Gabriel L. Somlo" <gsomlo@gmail.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gabriel Somlo <gsomlo@gmail.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Gabriel Somlo <gsomlo@gmail.com>
The old-style "Routine Description: ..." comments use the leftmost column
and are placed between the parameter list and the function body. Therefore
they cause git-diff to produce bogus hunk headers that fail to name the
function being patched.
Convert these comment blocks to the current edk2 style. While at it, clean
them up too.
For PlatformBootManagerBeforeConsole() and
PlatformBootManagerAfterConsole(), copy the descriptions from the call
sites in "MdeModulePkg/Universal/BdsDxe/BdsEntry.c". They are more
detailed than the comments in the lib class header
"MdeModulePkg/Include/Library/PlatformBootManagerLib.h"; ArmVirtPkg
already uses these comments.
No functional changes.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Gabriel Somlo <gsomlo@gmail.com>
Move the TryRunningQemuKernel() call back to its original place. This
improves the UEFI boot time for VMs that have "-kernel", many disks or
NICs, and no "bootindex" properties. A well-known example is
guestfish/libguestfs.
For more info on the TryRunningQemuKernel() location, see the following
commits: 23d04b58e2, a78c4836ea, 158990b941.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Xiang Zheng <xiang.zheng@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
SMM core will add a HEADER before each allocated pool memory and clean
up this header once it's freed. If a block of allocated pool is marked
as read-only after allocation (EfiRuntimeServicesCode type of pool in
SMM will always be marked as read-only), #PF exception will be triggered
during memory pool freeing.
Normally EfiRuntimeServicesCode type of pool should not be freed in the
real world. But some test suites will actually do memory free for all
types of memory for the purpose of functionality and conformance test.
So this issue should be fixed anyway.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
If given address is on 64K boundary and the requested bit number is 64,
all SetBits(), ClearBits() and GetBits() will encounter ASSERT problem
in trying to do a 64 bits of shift, which is not allowed by LShift() and
RShift(). This patch tries to fix this issue by turning bits operation
into whole integer operation in such situation.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
If given address is on 64K boundary and the requested bit number is 64,
all SetBits(), ClearBits() and GetBits() will encounter ASSERT problem
in trying to do a 64 bits of shift, which is not allowed by LShift() and
RShift(). This patch tries to fix this issue by turning bits operation
into whole integer operation in such situation.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Due to the fact that HeapGuard needs CpuArchProtocol to update page
attributes, the feature is normally enabled after CpuArchProtocol is
installed. Since there're some drivers are loaded before CpuArchProtocl,
they cannot make use HeapGuard feature to detect potential issues.
This patch fixes above situation by updating the DXE core to skip the
NULL check against global gCpu in the IsMemoryTypeToGuard(), and adding
NULL check against gCpu in SetGuardPage() and UnsetGuardPage() to make
sure that they can be called but do nothing. This will allow HeapGuard to
record all guarded memory without setting the related Guard pages to not-
present.
Once the CpuArchProtocol is installed, a protocol notify will be called
to complete the work of setting Guard pages to not-present.
Please note that above changes will cause a #PF in GCD code during cleanup
of map entries, which is initiated by CpuDxe driver to update real mtrr
and paging attributes back to GCD. During that time, CpuDxe doesn't allow
GCD to update memory attributes and then any Guard page cannot be unset.
As a result, this will prevent Guarded memory from freeing during memory
map cleanup.
The solution is to avoid allocating guarded memory as memory map entries
in GCD code. It's done by setting global mOnGuarding to TRUE before memory
allocation and setting it back to FALSE afterwards in GCD function
CoreAllocateGcdMapEntry().
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This change is to avoid the function conflict.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
According to UEFI spec 2.7, PciIo->GetBarAttributes should return host
address (CPU view ddress) rather than device address (PCI view
address), and
device address = host address + address translation offset,
so we subtract translation from device address before returning.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Yi Li <phoenix.liyi@huawei.com>
Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to UEFI spec 2.7, PciRootBridgeIo->Configuration() should
return host address (CPU view ddress) rather than device address
(PCI view address), so in function GetMmioAddressTranslationOffset we
need to convert the range to device address before comparing.
And device address = host address + translation offset.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Yi Li <phoenix.liyi@huawei.com>
Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
PCI address translation is necessary for some non-x86 platforms. On
such platforms, address value (denoted as "device address" or "address
in PCI view") set to PCI BAR registers in configuration space might be
different from the address which is used by CPU to access the
registers in memory BAR or IO BAR spaces (denoted as "host address" or
"address in CPU view"). The difference between the two addresses is
called "Address Translation Offset" or simply "translation", and can
be represented by "Address Translation Offset" in ACPI QWORD Address
Space Descriptor (Offset 0x1E). However UEFI and ACPI differs on the
definitions of QWORD Address Space Descriptor, and we will follow UEFI
definition on UEFI protocols, such as PCI root bridge IO protocol and
PCI IO protocol. In UEFI 2.7, "Address Translation Offset" is "Offset
to apply to the Starting address to convert it to a PCI address". This
means:
1. Translation = device address - host address.
2. PciRootBridgeIo->Configuration should return CPU view address, as
well as PciIo->GetBarAttributes.
Summary of addresses used in protocol interfaces and internal
implementations:
1. *Only* the following protocol interfaces assume Address is Device
Address:
(1). PciHostBridgeResourceAllocation.GetProposedResources()
Otherwise PCI bus driver cannot set correct address into PCI
BARs.
(2). PciRootBridgeIo.Mem.Read() and PciRootBridgeIo.Mem.Write()
(3). PciRootBridgeIo.CopyMem()
UEFI and PI spec have clear statements for all other protocol
interfaces about the address type.
2. Library interfaces and internal implementation:
(1). Base and Limit in PCI_ROOT_BRIDGE_APERTURE are device address.
It is easy to check whether the address is below 4G or above 4G.
(2). Addresses in PCI_ROOT_BRIDGE_INSTANCE.ResAllocNode are host
address, for they are allocated from GCD.
(3). Address passed to PciHostBridgeResourceConflict is host address,
for it comes from PCI_ROOT_BRIDGE_INSTANCE.ResAllocNode.
RESTRICTION: to simplify the situation, we require the alignment of
Translation must be larger than any BAR alignment in the same root
bridge, so that resource allocation alignment can be applied to both
device address and host address.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Yi Li <phoenix.liyi@huawei.com>
Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add Translation field to PCI_ROOT_BRIDGE_APERTURE. Translation is used
to represent the difference between device address and host address,
if they are not the same on some platforms.
In UEFI 2.7, "Address Translation Offset" is "Offset to apply to the
Starting address to convert it to a PCI address". This means:
Translation = device address - host address
So we also use the above calculation for this Translation field to
keep consistent.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Yi Li <phoenix.liyi@huawei.com>
Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Use ZeroMem() to initialize (or re-initialize) all fields in temporary
PCI_ROOT_BRIDGE_APERTURE variables to zero. This is not mandatory but
is helpful for future extension: when we add new fields to
PCI_ROOT_BRIDGE_APERTURE and the default value of these fields can
safely be zero, this code will not suffer from an additional
change.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Yi Li <phoenix.liyi@huawei.com>
Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Use ZeroMem() to initialize (or re-initialize) all fields in temporary
PCI_ROOT_BRIDGE_APERTURE variables to zero. This is not mandatory but
helpful for future extension: when we add new fields to
PCI_ROOT_BRIDGE_APERTURE and the default value of these fields can
safely be zero, this code will not suffer from an additional change.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Yi Li <phoenix.liyi@huawei.com>
Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
If timer interrupt is level sensitive, reloading timer compare
register has a side effect of clearing GIC pending status, so a "ISB"
is needed to make sure this instruction is executed before enabling
CPU IRQ, or else we may get spurious timer interrupts.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
de8373fa07 could not handle two cases.
1. For the case that the USB3 debug port instance and DMA buffers are
from PEI HOB with IOMMU enabled, it was to reallocate the DMA buffers
by AllocateAddress with the memory type accessible by SMM environment.
But reallocating the DMA buffers by AllocateAddress may fail.
2. At S3 resume, after the code is transferred to PiSmmCpuDxeSmm from
S3Resume2Pei, HOB is still needed to be used for DMA operation, but
PiSmmCpuDxeSmm has no way to get the HOB at S3 resume.
The patch is to re-support IOMMU.
For PEI, allocate granted DMA buffer from IOMMU PPI, register IOMMU PPI
notification to reinitialize hardware with granted DMA buffer if IOMMU
PPI is not present yet.
For DXE, map DMA buffer by PciIo in PciIo notification for early DXE,
and register DxeSmmReadyToLock notification to reinitialize hardware
with granted DXE DMA buffer accessible by SMM environment for late DXE.
DebugAgentLib has been managing the instance as Handle in
HOB/SystemTable. The Handle(instance) from DebugAgentLib can be used
directly in DebugCommunicationLibUsb3. Then DebugCommunicationLibUsb3
could get consistent Handle(instance) from DebugAgentLib.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Fix GCC build failures below.
variable 'EvtTrb' set but not used [-Werror=unused-but-set-variable]
variable 'Index' set but not used [-Werror=unused-but-set-variable]
The build failure could only be caught with -D SOURCE_DEBUG_USE_USB3
build flag.
ad6040ec9b needs to be also reverted
when reverting IOMMU support patches, otherwise there will be conflict.
This patch is to re-do ad6040ec9b.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
QemuBootOrderLib expects PlatformBootManagerLib to call the following
triplet:
(1) EfiBootManagerConnectAll(),
(2) EfiBootManagerRefreshAllBootOption(),
(3) SetBootOrderFromQemu().
This leads to bad performance, when many devices exist such that the
firmware can drive them, but they aren't marked for booting in the
"bootorder" fw_cfg file. Namely,
(1) EfiBootManagerConnectAll() talks to all hardware, which takes long.
Plus some DriverBindingStart() functions write NV variables, which is
also slow. (For example, the IP config policy for each NIC is stored
in an NV var that is named after the MAC).
(2) EfiBootManagerRefreshAllBootOption() generates boot options from the
protocol instances produced by (1). Writing boot options is slow.
(3) Under the above circumstances, SetBootOrderFromQemu() removes most of
the boot options produced by (2). Erasing boot options is slow.
Introduce ConnectDevicesFromQemu() as a replacement for (1): only connect
devices that the QEMU user actually wants to boot off of.
(There's a slight loss of compatibility when a platform switches from
EfiBootManagerConnectAll() to ConnectDevicesFromQemu().
EfiBootManagerConnectAll() may produce UEFI device paths that are unknown
to QemuBootOrderLib (that is, for neither PCI- nor virtio-mmio-based
devices). The BootOrderComplete() function lets such unmatched boot
options survive at the end of the boot order. With
ConnectDevicesFromQemu(), these options will not be auto-generated in the
first place. They may still be produced by other means.
SetBootOrderFromQemu() is not modified in any way; reordering+filtering
boot options remains a separate task.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: Xiang Zheng <xiang.zheng@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # ArmVirtQemu
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Xiang Zheng <xiang.zheng@linaro.org>
The "/MAC(" suffix of the translated UEFI devpath prefix is unnecessary
for matching, because the virtio-mmio base address in VenHwString is
unique anyway. Furthermore, the partial string "MAC(" cannot be processed
by ConvertTextToDevicePath(), which will become relevant later in this
series. Remove "/MAC(".
While at it, remove a bogus comment on PCI.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: Xiang Zheng <xiang.zheng@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # ArmVirtQemu
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Xiang Zheng <xiang.zheng@linaro.org>
There're two ASSERT issues which will be triggered by boot loader of
Windows 10.
The first is caused by allocating memory in heap guard during another
memory allocation, which is not allowed in DXE core. Avoiding reentry
of memory allocation has been considered in heap guard feature. But
there's a hole in the code of function FindGuardedMemoryMap(). The fix
is adding AllocMapUnit parameter in the condition of while(), which
will prevent memory allocation from happenning during Guard page
check operation.
The second is caused by the core trying to allocate page 0 with Guard
page, which will cause the start address rolling back to the end of
supported system address. According to the requirement of heap guard,
the fix is just simply skipping the free memory at page 0 and let
the core continue searching free memory after it.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In edit or hexedit, the mouse cursor doesn't move when moving
the mouse.
The root cause is 5563281fa2
* ShellPkg/[hex]edit: use SimpleTextInEx to read console
wrongly uses WaitForEvent() to listen keyboard input.
It blocks the code execution when there is no keyboard input.
While the same function also polls the mouse move status,
the mouse movement cannot be reflected to the screen when
there is no keyboard input.
The patch fixes the issue by use CheckEvent() instead of
WaitForEvent().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Today's implementation forgot to clear the screen to black in
SetMode(). It causes SCT SetMode() test fails.
The patch adds the clear screen operation in SetMode() to fix
the SCT failure.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Among other things, the header file declares the AllocateAcpiNvsPool()
function. This function is called from the "LockBoxLib.c" source file (in
the implementation of the SaveLockBox() library API), which is built into
both library instances. AllocateAcpiNvsPool() is implemented separately
per library instance, in "LockBoxBase.c" and "LockBoxDxe.c", respectively.
(In the LockBoxBaseLib instance, the AllocateAcpiNvsPool() function is
never expected to be called -- the public SaveLockBox() API should never
be called before the DXE phase --, we just have to provide a stub for
linking purposes.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
We added initial support for QEMU's ACPI linker/loader in commit
a618eaa1f4 ("OvmfPkg: AcpiPlatformDxe: don't rely on unstable QEMU
interface", 2014-06-19). This commit defined the command structures in the
new file "QemuLoader.h", and #included the header in the preexistent
"Qemu.c" file, where the initial command script processing loop was being
implemented.
In commit 14b0faadfc ("OvmfPkg/AcpiPlatformDxe: Split QEMU fw-cfg into a
new file", 2015-02-02), we extracted the -- by then, more advanced --
linker/loader script processing from "Qemu.c" to "QemuFwCfgAcpi.c".
"Qemu.c" was going to need "QemuLoader.h" no longer, but we forgot to make
the #include directive unique to the new "QemuFwCfgAcpi.c" file. Do it
now.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Phil Dennis-Jordan <phil@philjordan.eu>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The ISCSI connection will fail for the first time if the target info is
retrieved from DHCP and expressed as URI format. The issue is caused by
the missing DNS protocol dependency check during the driver support
function.
This patch is to fix the above issue.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The incorrect return status was caused by the commit of 39b0867d, which
was to resolve the token status error that does not compliance with spec
definition, but it results the protocol status not compliance with spec
definition.
This patch is to resolve above issue.
Cc: Wang Fan <fan.wang@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wang, Fan <fan.wang@intel.com>
PcdDb optimization has handled PCD DB for each SKU, not for single PCD.
So, this PCD attribute is not used any more.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
It is regression bug that missing the Pcd DatumType info from DEC file
for --pcd .
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
TcgPei doesn't actually use the PEI-phase read-only variable service, so
drop that from the Depex.
This patch was inspired by commit ab9e11da66 ("SecurityPkg/Tcg2Pei: drop
PeiReadOnlyVariable from Depex", 2018-03-09).
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Suggested-by: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
- the @file comment block should match between INF and main C file
- rewrap / refill columns to 79 characters
- insert space before opening paren
- prefix and suffix //-style comment block with empty // lines
- fix indentation of arguments in multi-line function call
- general tab spacing (indent step) is 2 in edk2, unlike QEMU's 4
No functional changes.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Commit:24e4ad7 (OvmfPkg: Add AmdSevDxe driver) added a driver which runs
early in DXE phase and clears the C-bit from NonExistent entry -- which
is later split and accommodate the flash MMIO. When SMM is enabled, we
build two sets of page tables; first page table is used when executing
code in non SMM mode (SMM-less-pgtable) and second page table is used
when we are executing code in SMM mode (SMM-pgtable).
During boot time, AmdSevDxe driver clears the C-bit from the
SMM-less-pgtable. But when SMM is enabled, Qemu Flash services are used
from SMM mode.
In this patch we explicitly clear the C-bit from Qemu flash MMIO range
before we probe the flash. When OVMF is built with SMM_REQUIRE then
call to initialize the flash services happen after the SMM-pgtable is
created and processor has served the first SMI. At this time we will
have access to the SMM-pgtable.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: trivial coding style improvements]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The library registers a security management handler, to measure images
that are not measure in PEI phase. For example with the qemu PXE rom:
Loading driver at 0x0003E6C2000 EntryPoint=0x0003E6C9076 8086100e.efi
And the following binary_bios_measurements log entry seems to be
added:
PCR: 2 type: EV_EFI_BOOT_SERVICES_DRIVER size: 0x4e digest: 70a22475e9f18806d2ed9193b48d80d26779d9a4
The following order of operations ensures that 3rd party UEFI modules,
such as PCI option ROMs and other modules possibly loaded from outside
of firmware volumes, are measured into the TPM:
(1) Tcg2Dxe is included in DXEFV, therefore it produces the TCG2
protocol sometime in the DXE phase (assuming a TPM2 chip is present,
reported via PcdTpmInstanceGuid).
(2) The DXE core finds that no more drivers are left to dispatch from
DXEFV, and we enter the BDS phase.
(3) OVMF's PlatformBootManagerLib connects all PCI root bridges
non-recursively, producing PciIo instances and discovering PCI
oproms.
(4) The dispatching of images that don't originate from FVs is deferred
at this point, by
"MdeModulePkg/Universal/SecurityStubDxe/Defer3rdPartyImageLoad.c".
(5) OVMF's PlatformBootManagerLib signals EndOfDxe.
(6) OVMF's PlatformBootManagerLib calls
EfiBootManagerDispatchDeferredImages() -- the images deferred in
step (4) are now dispatched.
(7) Image dispatch invokes the Security / Security2 Arch protocols
(produced by SecurityStubDxe). In this patch, we hook
DxeTpm2MeasureBootLib into SecurityStubDxe, therefore image dispatch
will try to locate the TCG2 protocol, and measure the image into the
TPM2 chip with the protocol. Because of step (1), the TCG2 protocol
will always be found and used (assuming a TPM2 chip is present).
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This module measures and log the boot environment. It also produces
the Tcg2 protocol, which allows for example to read the log from OS.
The linux kernel doesn't yet read the EFI_TCG2_EVENT_LOG_FORMAT_TCG_2,
which is required for crypto-agile log. In fact, only upcoming 4.16
adds support EFI_TCG2_EVENT_LOG_FORMAT_TCG_1_2:
[ 0.000000] efi: EFI v2.70 by EDK II
[ 0.000000] efi: SMBIOS=0x3fa1f000 ACPI=0x3fbb6000 ACPI 2.0=0x3fbb6014 MEMATTR=0x3e7d4318 TPMEventLog=0x3db21018
$ python chipsec_util.py tpm parse_log binary_bios_measurements
[CHIPSEC] Version 1.3.5.dev2
[CHIPSEC] API mode: using OS native API (not using CHIPSEC kernel module)
[CHIPSEC] Executing command 'tpm' with args ['parse_log', '/tmp/binary_bios_measurements']
PCR: 0 type: EV_S_CRTM_VERSION size: 0x2 digest: 1489f923c4dca729178b3e3233458550d8dddf29
+ version:
PCR: 0 type: EV_EFI_PLATFORM_FIRMWARE_BLOB size: 0x10 digest: fd39ced7c0d2a61f6830c78c7625f94826b05bcc
+ base: 0x820000 length: 0xe0000
PCR: 0 type: EV_EFI_PLATFORM_FIRMWARE_BLOB size: 0x10 digest: 39ebc6783b72bc1e73c7d5bcfeb5f54a3f105d4c
+ base: 0x900000 length: 0xa00000
PCR: 7 type: EV_EFI_VARIABLE_DRIVER_CONFIG size: 0x35 digest: 57cd4dc19442475aa82743484f3b1caa88e142b8
PCR: 7 type: EV_EFI_VARIABLE_DRIVER_CONFIG size: 0x24 digest: 9b1387306ebb7ff8e795e7be77563666bbf4516e
PCR: 7 type: EV_EFI_VARIABLE_DRIVER_CONFIG size: 0x26 digest: 9afa86c507419b8570c62167cb9486d9fc809758
PCR: 7 type: EV_EFI_VARIABLE_DRIVER_CONFIG size: 0x24 digest: 5bf8faa078d40ffbd03317c93398b01229a0e1e0
PCR: 7 type: EV_EFI_VARIABLE_DRIVER_CONFIG size: 0x26 digest: 734424c9fe8fc71716c42096f4b74c88733b175e
PCR: 7 type: EV_SEPARATOR size: 0x4 digest: 9069ca78e7450a285173431b3e52c5c25299e473
PCR: 1 type: EV_EFI_VARIABLE_BOOT size: 0x3e digest: 252f8ebb85340290b64f4b06a001742be8e5cab6
PCR: 1 type: EV_EFI_VARIABLE_BOOT size: 0x6e digest: 22a4f6ee9af6dba01d3528deb64b74b582fc182b
PCR: 1 type: EV_EFI_VARIABLE_BOOT size: 0x80 digest: b7811d5bf30a7efd4e385c6179fe10d9290bb9e8
PCR: 1 type: EV_EFI_VARIABLE_BOOT size: 0x84 digest: 425e502c24fc924e231e0a62327b6b7d1f704573
PCR: 1 type: EV_EFI_VARIABLE_BOOT size: 0x9a digest: 0b5d2c98ac5de6148a4a1490ff9d5df69039f04e
PCR: 1 type: EV_EFI_VARIABLE_BOOT size: 0xbd digest: 20bd5f402271d57a88ea314fe35c1705956b1f74
PCR: 1 type: EV_EFI_VARIABLE_BOOT size: 0x88 digest: df5d6605cb8f4366d745a8464cfb26c1efdc305c
PCR: 4 type: EV_EFI_ACTION size: 0x28 digest: cd0fdb4531a6ec41be2753ba042637d6e5f7f256
PCR: 0 type: EV_SEPARATOR size: 0x4 digest: 9069ca78e7450a285173431b3e52c5c25299e473
PCR: 1 type: EV_SEPARATOR size: 0x4 digest: 9069ca78e7450a285173431b3e52c5c25299e473
PCR: 2 type: EV_SEPARATOR size: 0x4 digest: 9069ca78e7450a285173431b3e52c5c25299e473
PCR: 3 type: EV_SEPARATOR size: 0x4 digest: 9069ca78e7450a285173431b3e52c5c25299e473
PCR: 4 type: EV_SEPARATOR size: 0x4 digest: 9069ca78e7450a285173431b3e52c5c25299e473
PCR: 5 type: EV_SEPARATOR size: 0x4 digest: 9069ca78e7450a285173431b3e52c5c25299e473
$ tpm2_pcrlist
sha1 :
0 : 35bd1786b6909daad610d7598b1d620352d33b8a
1 : ec0511e860206e0af13c31da2f9e943fb6ca353d
2 : b2a83b0ebf2f8374299a5b2bdfc31ea955ad7236
3 : b2a83b0ebf2f8374299a5b2bdfc31ea955ad7236
4 : 45a323382bd933f08e7f0e256bc8249e4095b1ec
5 : d16d7e629fd8d08ca256f9ad3a3a1587c9e6cc1b
6 : b2a83b0ebf2f8374299a5b2bdfc31ea955ad7236
7 : 518bd167271fbb64589c61e43d8c0165861431d8
8 : 0000000000000000000000000000000000000000
9 : 0000000000000000000000000000000000000000
10 : 0000000000000000000000000000000000000000
11 : 0000000000000000000000000000000000000000
12 : 0000000000000000000000000000000000000000
13 : 0000000000000000000000000000000000000000
14 : 0000000000000000000000000000000000000000
15 : 0000000000000000000000000000000000000000
16 : 0000000000000000000000000000000000000000
17 : ffffffffffffffffffffffffffffffffffffffff
18 : ffffffffffffffffffffffffffffffffffffffff
19 : ffffffffffffffffffffffffffffffffffffffff
20 : ffffffffffffffffffffffffffffffffffffffff
21 : ffffffffffffffffffffffffffffffffffffffff
22 : ffffffffffffffffffffffffffffffffffffffff
23 : 0000000000000000000000000000000000000000
sha256 :
0 : 9ae903dbae3357ac00d223660bac19ea5c021499a56201104332ab966631ce2c
1 : acc611d90245cf04e77b0ca94901f90e7fa54770f0426f53c3049b532243d1b8
2 : 3d458cfe55cc03ea1f443f1562beec8df51c75e14a9fcf9a7234a13f198e7969
3 : 3d458cfe55cc03ea1f443f1562beec8df51c75e14a9fcf9a7234a13f198e7969
4 : 7a94ffe8a7729a566d3d3c577fcb4b6b1e671f31540375f80eae6382ab785e35
5 : a5ceb755d043f32431d63e39f5161464620a3437280494b5850dc1b47cc074e0
6 : 3d458cfe55cc03ea1f443f1562beec8df51c75e14a9fcf9a7234a13f198e7969
7 : 65caf8dd1e0ea7a6347b635d2b379c93b9a1351edc2afc3ecda700e534eb3068
8 : 0000000000000000000000000000000000000000000000000000000000000000
9 : 0000000000000000000000000000000000000000000000000000000000000000
10 : 0000000000000000000000000000000000000000000000000000000000000000
11 : 0000000000000000000000000000000000000000000000000000000000000000
12 : 0000000000000000000000000000000000000000000000000000000000000000
13 : 0000000000000000000000000000000000000000000000000000000000000000
14 : 0000000000000000000000000000000000000000000000000000000000000000
15 : 0000000000000000000000000000000000000000000000000000000000000000
16 : 0000000000000000000000000000000000000000000000000000000000000000
17 : ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
18 : ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
19 : ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
20 : ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
21 : ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
22 : ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
23 : 0000000000000000000000000000000000000000000000000000000000000000
sha384 :
The PhysicalPresenceLib is required, it sets some variables, but the
firmware doesn't act on it yet.
Laszlo Ersek explained on the list why Tpm2DeviceLib has to be
resolved differently for DXE_DRIVER modules in general and for
"Tcg2Dxe.inf" specifically:
* We have a library class called Tpm2DeviceLib -- this is basically the
set of APIs declared in "SecurityPkg/Include/Library/Tpm2DeviceLib.h".
Its leading comment says "This library abstract how to access TPM2
hardware device".
There are two *sets* of APIs in "Tpm2DeviceLib.h":
(a) functions that deal with the TPM2 device:
- Tpm2RequestUseTpm(),
- Tpm2SubmitCommand()
This set of APIs is supposed to be used by clients that *consume*
the TPM2 device abstraction.
(b) the function Tpm2RegisterTpm2DeviceLib(), which is supposed to be
used by *providers* of various TPM2 device abstractions.
* Then, we have two implementations (instances) of the Tpm2DeviceLib class:
(1) SecurityPkg/Library/Tpm2DeviceLibTcg2/Tpm2DeviceLibTcg2.inf
(2) SecurityPkg/Library/Tpm2DeviceLibRouter/Tpm2DeviceLibRouterDxe.inf
(1) The first library instance ("Tpm2DeviceLibTcg2.inf") implements the
APIs listed under (a), and it does not implement (b) -- see
EFI_UNSUPPORTED. In other words, this lib instance is strictly meant for
drivers that *consume* the TPM2 device abstraction. And, the (a) group
of APIs is implemented by forwarding the requests to the TCG2 protocol.
The idea here is that all the drivers that consume the TPM2 abstraction
do not have to be statically linked with a large TPM2 device library
instance; instead they are only linked (statically) with this "thin"
library instance, and all the actual work is delegated to whichever
driver that provides the singleton TCG2 protocol.
(2) The second library instance ("Tpm2DeviceLibRouterDxe.inf") is meant
for the driver that offers (produces) the TCG2 protocol. This lib
instance implements both (a) and (b) API groups.
* Here's how things fit together:
(i) The "SecurityPkg/Library/Tpm2DeviceLibDTpm/Tpm2InstanceLibDTpm.inf"
library instance (which has no lib class) is linked into "Tcg2Dxe.inf"
via NULL class resolution. This simply means that before the
"Tcg2Dxe.inf" entry point function is entered, the constructor function
of "Tpm2InstanceLibDTpm.inf" will be called.
(ii) This Tpm2InstanceLibDTpmConstructor() function calls API (b), and
registers its own actual TPM2 command implementation with the
"Tpm2DeviceLibRouter" library instance (also linked into the Tcg2Dxe
driver). This provides the back-end for the API set (a).
TCG2 protocol provider (Tcg2Dxe.inf driver) launches
|
v
NULL class: Tpm2InstanceLibDTpm instance construction
|
v
Tpm2DeviceLib class: Tpm2DeviceLibRouter instance
backend registration for API set (a)
(iii) The Tcg2Dxe driver exposes the TCG2 protocol.
(iv) A TPM2 consumer calls API set (a) via lib instance (1). Such calls
land in Tcg2Dxe, via the protocol.
(v) Tcg2Dxe serves the protocol request by forwarding it to API set (a)
from lib instance (2).
(vi) Those functions call the "backend" functions registered by
Tpm2DeviceLibDTpm in step (ii).
TPM 2 consumer driver
|
v
Tpm2DeviceLib class: Tpm2DeviceLibTcg2 instance
|
v
TCG2 protocol interface
|
v
TCG2 protocol provider: Tcg2Dxe.inf driver
|
v
Tpm2DeviceLib class: Tpm2DeviceLibRouter instance
|
v
NULL class: Tpm2InstanceLibDTpm instance
(via earlier registration)
|
v
TPM2 chip (actual hardware)
* So that is the "router" pattern in edk2. Namely,
- Consumers of an abstraction use a thin library instance.
- The thin library instance calls a firmware-global (singleton) service,
i.e. a PPI (in the PEI phase) or protocol (in the DXE phase).
- The PEIM providing the PPI, or the DXE driver providing the protocol,
don't themselves implement the actual service either. Instead they
offer a "registration" service too, and they only connect the incoming
"consumer" calls to the earlier registered back-end(s).
- The "registration service", for back-ends to use, may take various
forms.
It can be exposed globally to the rest of the firmware, as
another member function of the PPI / protocol structure. Then backends
can be provided by separate PEIMs / DXE drivers.
Or else, the registration service can be exposed as just another
library API. In this case, the backends are provided as NULL class
library instances, and a platform DSC file links them into the PEIM /
DXE driver via NULL class resolutions. The backend lib instances call
the registration service in their own respective constructor
functions.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This module will initialize TPM device, measure reported FVs and BIOS
version. We keep both SHA-1 and SHA-256 for the TCG 1.2 log format
compatibility, but the SHA-256 measurements and TCG 2 log format are
now recommended.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The Tcg2ConfigPei module informs the firmware globally about the TPM
device type, by setting the PcdTpmInstanceGuid PCD to the appropriate
GUID value. The original module under SecurityPkg can perform device
detection, or read a cached value from a non-volatile UEFI variable.
OvmfPkg's clone of the module only performs the TPM2 hardware detection.
This is what the module does:
- Check the QEMU hardware for TPM2 availability only
- If found, set the dynamic PCD "PcdTpmInstanceGuid" to
&gEfiTpmDeviceInstanceTpm20DtpmGuid. This is what informs the rest of
the firmware about the TPM type.
- Install the gEfiTpmDeviceSelectedGuid PPI. This action permits the
PEI_CORE to dispatch the Tcg2Pei module, which consumes the above PCD.
In effect, the gEfiTpmDeviceSelectedGuid PPI serializes the setting
and the consumption of the "TPM type" PCD.
- If no TPM2 was found, install gPeiTpmInitializationDonePpiGuid.
(Normally this is performed by Tcg2Pei, but Tcg2Pei doesn't do it if
no TPM2 is available. So in that case our Tcg2ConfigPei must do it.)
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Move the GlobalData.BuildOptionPcd before FdfParser() function and add
type check for Pcd item.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This information is to record which device requested which DMA buffer.
It can be used for DMA buffer analysis.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
After IOMMU is enabled in S3, original solution with SMM device
code (OpalPasswordSmm) to unlock OPAL device for S3 will not work
as the DMA operation will be aborted without granted DMA buffer.
Instead, this solution is to add OpalPasswordPei to eliminate
SMM device code, and OPAL setup UI produced by OpalPasswordDxe
will be updated to send requests (set password, update password,
and etc), and then the requests will be processed in next boot
before SmmReadyToLock, password and device info will be saved to
lock box used by OpalPasswordPei to unlock OPAL device for S3.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
With this flag, the LockBox can be restored in S3 resume only.
The LockBox can not be restored after SmmReadyToLock in normal boot
and after EndOfS3Resume in S3 resume.
It can not be set together with LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
if PcdDxeNxMemoryProtectionPolicy is enabled for EfiReservedMemoryType
of memory, #PF will be triggered for each APs after ExitBootServices
in SCRT test. The root cause is that AP wakeup code executed at that
time is stored in memory of type EfiReservedMemoryType (referenced by
global mReservedApLoopFunc), which is marked as non-executable.
This patch fixes this issue by setting memory of mReservedApLoopFunc to
be executable immediately after allocation.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The root cause is an unnecessary check to Size parameter in function
AdjustMemoryS(). It will cause one standalone free page (happen to have
Guard page around) in the free memory list cannot be allocated, even if
the requested memory size is less than a page.
//
// At least one more page needed for Guard page.
//
if (Size < (SizeRequested + EFI_PAGES_TO_SIZE (1))) {
return 0;
}
The following code in the same function actually covers above check
implicitly. So the fix is simply removing above check.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Boolean values do not need to use explicit comparisons
to TRUE or FALSE.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by:Chao Zhang <chao.b.zhang@intel.com>
I recently added the gcc-8 specific "-Wno-stringop-truncation" and
"-Wno-restrict" options to BUILD_CFLAGS, both for "Darwin" (XCODE5 /
clang, OSX) and otherwise (gcc, Linux / Cygwin).
I also regression-tested the change with gcc-4.8 on Linux -- gcc-4.8 does
not know either of the (gcc-8 specific) "-Wno-stringop-truncation" and
"-Wno-restrict" options, yet the build completed fine (by GCC design).
Regarding OSX, my expectation was that
- XCODE5 / clang would either recognize these warnings options (because
clang does recognize most -W options of gcc),
- or, similarly to gcc, clang would simply ignore the "-Wno-xxx" flags
that it didn't recognize.
Neither is the case; the new flags have broken the BaseTools build on OSX.
Revert them (for OSX only).
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reported-by: Liming Gao <liming.gao@intel.com>
Fixes: 1d212a83df
Fixes: 9222154ae7
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
If enabled, NX memory protection feature will mark some types of active
memory as NX (non-executable), which includes the first page of the stack.
This will overwrite the attributes of the first page of the stack if the
stack guard feature is also enabled.
The solution is to override the attributes setting to the first page of
the stack by adding back the 'EFI_MEMORY_RP' attribute when the stack
guard feature is enabled.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The commit rewrites the logic in function
InitializeDxeNxMemoryProtectionPolicy() for handling the first page
(page 0) when NULL pointer detection feature is enabled.
Instead of skip setting the page 0, the codes will now override the
attribute setting of page 0 by adding the 'EFI_MEMORY_RP' attribute.
The purpose is to make it easy for other special handling of pages
(e.g. the first page of the stack when stack guard feature is enabled).
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Function BmRepairAllControllers may recursively call itself if some
driver health protocol returns EfiDriverHealthStatusReconnectRequired.
However, driver health protocol of some buggy third party driver may
always return such status even after one and another reconnect. The
endless iteration will cause stack overflow and then system exception,
and it may be not easy to find that the exception is actually caused
by stack overflow.
So we limit the number of reconnect retry to 10 to improve code
robustness, and DEBUG_CODE is moved ahead before recursive repair to
track the repair result.
We also remove a duplicated declaration of BmRepairAllControllers() in
InternalBm.h in this patch, for it is only a trivial change.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
CompatibleRangeTest() contains two bugs:
1. It doesn't reject the memory above 16MB
2. it cannot handle the case when the partial or whole range of
requested memory is already tested.
The patch fixes the two bugs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The generic timer driver only EOIs the timer interrupt if
the ISTATUS bit is set. This is completely fine if you pretend
that spurious interrupts do not exist. But as a matter of fact,
they do, and the first one will leave the interrupt activated
at the GIC level, making sure that no other interrupt can make
it anymore.
Making sure that each interrupt Ack is paired with an EOI is the
way to go. Oh, and enabling the interrupt each time it is taken
is completely pointless. We entered this function for a good
reason...
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add PcdVTdPeiDmaBufferSize(S3) to replace the hard coded value
TOTAL_DMA_BUFFER_SIZE and TOTAL_DMA_BUFFER_SIZE_S3 in IntelVTdPmrPei.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
NULL is returned to Mapping when Operation is BusMasterCommonBuffer or
BusMasterCommonBuffer64 in PeiIoMmuMap().
So Mapping == NULL is valid when calling PeiIoMmuUnmap().
940dbd071e wrongly changed EFI_SUCCESS
to EFI_INVALID_PARAMETER when Mapping == NULL in PeiIoMmuUnmap().
This patch is to correct it.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Based on the following patch from Brijesh Singh <brijesh.singh@amd.com>:
[PATCH v2 1/2] OvmfPkg/AmdSevDxe: Clear the C-bit from SMM Saved State
http://mid.mail-archive.com/20180228161415.28723-2-brijesh.singh@amd.comhttps://lists.01.org/pipermail/edk2-devel/2018-February/022016.html
Original commit message from Brijesh:
> When OVMF is built with SMM, SMMSaved State area (SMM_DEFAULT_SMBASE +
> SMRAM_SAVE_STATE_MAP_OFFSET) contains data which need to be accessed by
> both guest and hypervisor. Since the data need to be accessed by both
> hence we must map the SMMSaved State area as unencrypted (i.e C-bit
> cleared).
>
> This patch clears the SavedStateArea address before SMBASE relocation.
> Currently, we do not clear the SavedStateArea address after SMBASE is
> relocated due to the following reasons:
>
> 1) Guest BIOS never access the relocated SavedStateArea.
>
> 2) The C-bit works on page-aligned address, but the SavedStateArea
> address is not a page-aligned. Theoretically, we could roundup the
> address and clear the C-bit of aligned address but looking carefully we
> found that some portion of the page contains code -- which will causes a
> bigger issue for the SEV guest. When SEV is enabled, all the code must
> be encrypted otherwise hardware will cause trap.
Changes by Laszlo:
- separate AmdSevDxe bits from SmmCpuFeaturesLib bits;
- spell out PcdLib dependency with #include and in LibraryClasses;
- replace (SMM_DEFAULT_SMBASE + SMRAM_SAVE_STATE_MAP_OFFSET) calculation
with call to new MemEncryptSevLocateInitialSmramSaveStateMapPages()
function;
- consequently, pass page-aligned BaseAddress to
MemEncryptSevClearPageEncMask();
- zero the pages before clearing the C-bit;
- pass Flush=TRUE to MemEncryptSevClearPageEncMask();
- harden the treatment of MemEncryptSevClearPageEncMask() failure.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Based on the following patch from Brijesh Singh <brijesh.singh@amd.com>:
[PATCH v2 1/2] OvmfPkg/AmdSevDxe: Clear the C-bit from SMM Saved State
http://mid.mail-archive.com/20180228161415.28723-2-brijesh.singh@amd.comhttps://lists.01.org/pipermail/edk2-devel/2018-February/022016.html
Once PiSmmCpuDxeSmm relocates SMBASE for all VCPUs, the pages of the
initial SMRAM save state map can be re-encrypted (including zeroing them
out after setting the C-bit on them), and they can be released to DXE for
general use (undoing the allocation that we did in PlatformPei's
AmdSevInitialize() function).
The decryption of the same pages (which will occur chronologically
earlier) is implemented in the next patch; hence the "re-encryption" part
of this patch is currently a no-op. The series is structured like this in
order to be bisection-friendly. If the decryption patch preceded this
patch, then an info leak would be created while standing between the
patches.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
In the next two patches, we'll temporarily decrypt the pages containing
the initial SMRAM save state map, for SMBASE relocation. (Unlike the
separate, relocated SMRAM save state map of each VCPU, the original,
shared map behaves similarly to a "common buffer" between guest and host.)
The decryption will occur near the beginning of the DXE phase, in
AmdSevDxe, and the re-encryption will occur in PiSmmCpuDxeSmm, via OVMF's
SmmCpuFeaturesLib instance.
There is a non-trivial time gap between these two points, and the DXE
phase might use the pages overlapping the initial SMRAM save state map for
arbitrary purposes meanwhile. In order to prevent any information leak
towards the hypervisor, make sure the DXE phase puts nothing in those
pages until re-encryption is done.
Creating a memalloc HOB for the area in question is safe:
- the temporary SEC/PEI RAM (stack and heap) is based at
PcdOvmfSecPeiTempRamBase, which is above 8MB,
- the permanent PEI RAM (installed in PlatformPei's PublishPeiMemory()
function) never starts below PcdOvmfDxeMemFvBase, which is also above
8MB.
The allocated pages can be released to the DXE phase after SMBASE
relocation and re-encryption are complete.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
In the next three patches, we're going to modify three modules under
OvmfPkg. When OVMF is built with -D SMM_REQUIRE and runs in an SEV guest,
each affected module will have to know the page range that covers the
initial (pre-SMBASE relocation) SMRAM save state map. Add a helper
function to MemEncryptSevLib that calculates the "base address" and
"number of pages" constants for this page range.
(In a RELEASE build -- i.e., with assertions disabled and optimization
enabled --, the helper function can be compiled to store two constants
determined at compile time.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Document the
"Cr3BaseAddress" parameter, and correct several parameter references.
Replace a "clear" reference to the C-bit with a "set" reference.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Document the
"Cr3BaseAddress" parameter, and correct several parameter references.
Replace a "set" reference to the C-bit with a "clear" reference.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Replace any
leftover "clear" references to the C-bit with "set" references. Also
remove any excess space in the comment block, and unindent the trailing
"**/" if necessary. Correct several parameter references.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Also remove
any excess space in the comment block, and unindent the trailing "**/" if
necessary. Correct several parameter references.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Also remove
any excess space in the comment block, and unindent the trailing "**/" if
necessary.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Because terminal doesn't support shift and toggle key state,
ReadKeyStrokeEx just sets the two states to 0.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
gcc-8 (which is part of Fedora 28) enables the new warning
"-Wstringop-overflow" in "-Wall". This warning is documented in detail at
<https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html>; the
introduction says
> Warn for calls to string manipulation functions such as memcpy and
> strcpy that are determined to overflow the destination buffer.
It breaks the BaseTools build with:
> GenVtf.c: In function 'ConvertVersionInfo':
> GenVtf.c:132:7: error: 'strncpy' specified bound depends on the length
> of the source argument [-Werror=stringop-overflow=]
> strncpy (TemStr + 4 - Length, Str, Length);
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> GenVtf.c:130:14: note: length computed here
> Length = strlen(Str);
> ^~~~~~~~~~~
It is a false positive because, while the bound equals the length of the
source argument, the destination pointer is moved back towards the
beginning of the destination buffer by the same amount (and this amount is
range-checked first, so we can't precede the start of the dest buffer).
Replace both strncpy() calls with memcpy().
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Cole Robinson <crobinso@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reported-by: Cole Robinson <crobinso@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
gcc-8 (which is part of Fedora 28) enables the new warning
"-Wrestrict" in "-Wall". This warning is documented in detail
at <https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html>; the
introduction says
> Warn when an object referenced by a restrict-qualified parameter (or, in
> C++, a __restrict-qualified parameter) is aliased by another argument,
> or when copies between such objects overlap.
It breaks the BaseTools build (in the Brotli compression library) with:
> In function 'ProcessCommandsInternal',
> inlined from 'ProcessCommands' at dec/decode.c:1828:10:
> dec/decode.c:1781:9: error: 'memcpy' accessing between 17 and 2147483631
> bytes at offsets 16 and 16 overlaps between 17 and 2147483631 bytes at
> offset 16 [-Werror=restrict]
> memcpy(copy_dst + 16, copy_src + 16, (size_t)(i - 16));
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> In function 'ProcessCommandsInternal',
> inlined from 'SafeProcessCommands' at dec/decode.c:1833:10:
> dec/decode.c:1781:9: error: 'memcpy' accessing between 17 and 2147483631
> bytes at offsets 16 and 16 overlaps between 17 and 2147483631 bytes at
> offset 16 [-Werror=restrict]
> memcpy(copy_dst + 16, copy_src + 16, (size_t)(i - 16));
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Paolo Bonzini <pbonzini@redhat.com> analyzed the Brotli source in detail,
and concluded that the warning is a false positive:
> This seems safe to me, because it's preceded by:
>
> uint8_t* copy_dst = &s->ringbuffer[pos];
> uint8_t* copy_src = &s->ringbuffer[src_start];
> int dst_end = pos + i;
> int src_end = src_start + i;
> if (src_end > pos && dst_end > src_start) {
> /* Regions intersect. */
> goto CommandPostWrapCopy;
> }
>
> If [src_start, src_start + i) and [pos, pos + i) don't intersect, then
> neither do [src_start + 16, src_start + i) and [pos + 16, pos + i).
>
> The if seems okay:
>
> (src_start + i > pos && pos + i > src_start)
>
> which can be rewritten to:
>
> (pos < src_start + i && src_start < pos + i)
>
> Then the numbers are in one of these two orders:
>
> pos <= src_start < pos + i <= src_start + i
> src_start <= pos < src_start + i <= pos + i
>
> These two would be allowed by the "if", but they can only happen if pos
> == src_start so they degenerate to the same two orders above:
>
> pos <= src_start < src_start + i <= pos + i
> src_start <= pos < pos + i <= src_start + i
>
> So it is a false positive in GCC.
Disable the warning for now.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Cole Robinson <crobinso@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reported-by: Cole Robinson <crobinso@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
gcc-8 (which is part of Fedora 28) enables the new warning
"-Wstringop-truncation" in "-Wall". This warning is documented in detail
at <https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html>; the
introduction says
> Warn for calls to bounded string manipulation functions such as strncat,
> strncpy, and stpncpy that may either truncate the copied string or leave
> the destination unchanged.
It breaks the BaseTools build with:
> EfiUtilityMsgs.c: In function 'PrintMessage':
> EfiUtilityMsgs.c:484:9: error: 'strncat' output may be truncated copying
> between 0 and 511 bytes from a string of length 511
> [-Werror=stringop-truncation]
> strncat (Line, Line2, MAX_LINE_LEN - strlen (Line) - 1);
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> EfiUtilityMsgs.c:469:9: error: 'strncat' output may be truncated copying
> between 0 and 511 bytes from a string of length 511
> [-Werror=stringop-truncation]
> strncat (Line, Line2, MAX_LINE_LEN - strlen (Line) - 1);
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> EfiUtilityMsgs.c:511:5: error: 'strncat' output may be truncated copying
> between 0 and 511 bytes from a string of length 511
> [-Werror=stringop-truncation]
> strncat (Line, Line2, MAX_LINE_LEN - strlen (Line) - 1);
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The right way to fix the warning would be to implement string concat with
snprintf(). However, Microsoft does not appear to support snprintf()
before VS2015
<https://stackoverflow.com/questions/2915672/snprintf-and-visual-studio-2010>,
so we just have to shut up the warning. The strncat() calls flagged above
are valid BTW.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Cole Robinson <crobinso@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Current BLOCK IO API code is using TPL_CALLBACK,
but comment is saying TPL_NOTIFY.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Within function UpdateDisplayFromHistory():
When getting a character with different attribute with the current one,
the statement to compare the character with a 'NULL' char should be:
*StringSegmentEnd != CHAR_NULL
rather than:
StringSegmentEnd != CHAR_NULL
This commit resolves this typo.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
When a USB device reports failure for a CMD and REQUEST SENSE returns
Media Changed key, UsbBootExecCmdWithRetry() stops to retry CMD and
returns EFI_MEDIA_CHANGED to caller.
For this case, the CMD should be retried until success, getting
NoMedia sense key or timeout.
The patch updates UsbBootExecCmdWithRetry() to follow the above
rule so EFI_MEDIA_CHANGED is no longer returned.
UsbBootDetectMedia() is updated accordingly.
Because UsbBootGetParams() is called for new plugged USB storage,
and some USB storage devices may report Media Changed key,
UsbBootGetParams() is updated to treat it as a Success.
This change could fix the issue that some USB storage devices
cannot be detected.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This reverts commit a662afb5b0.
* MdeModulePkg/UsbStorage: Fix "map -r" cannot detect media change
The above commit fixed the following issue:
When system boots to Shell without CDROM inside USB CDROM drive,
and then user inserts the CDROM with Eltorito file system,
"map -r" cannot show the new ELtorito file system.
The commit caused EFI_MEDIA_CHANGED status returned from
UsbBootDetectMedia().
But that fix exposes another issue:
When issuing ReadCapacity command to certain USB key
(Kingston DataTraveler G3 8GB) after it's hot-plugged, USB device
returns STALL error and RequestSense command returns media changed
sense data. (Most of the USB keys return SUCCESS for ReadCapacity
command after hot-plug.)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This reverts commit 6461344c31.
* MdeModulePkg/UsbMass: Fix hot-plug USB CDROM can't be recognized
UsbBootExecCmd() only calls UsbBootRequestSense() to get sense key
when CMD fails.
When POWER ON (29h) ASC returns from REQUEST SENSE, implementation
should retry the CMD, instead of treating this as a SUCCESS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Per UEFI spec, FibreEx.WWN, FibreEx.Lun, SasEx.Address, SasEx.Lun
and iSCSI.Lun are all 8-byte array with byte #0 in the left.
It means "0102030405060708" should be converted to:
UINT8[8] = {01, 02, 03, 04, 05, 06, 07, 08}
or UINT64 = {0807060504030201}
Today's implementation wrongly uses the reversed order.
The patch fixes this issue by using StrHexToBytes().
Copy this solution from MdePkg Hash version d0196be.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
If protocol string is not specified, default TCP(0) should be used.
Today's implementation wrongly sets to 1 for this case.
Copy the fix solution from MdePkg Hash version e6c80aea.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Per UEFI spec, iSCSI.Lun is a 8-byte array with byte #0 in the left.
It means "0102030405060708" should be converted to:
UINT8[8] = {01, 02, 03, 04, 05, 06, 07, 08}
or UINT64 = {0807060504030201}
Today's implementation wrongly uses the reversed order.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jie Lin <jie.lin@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
If protocol string is not specified, default TCP(0) should be used.
Today's implementation wrongly sets to 1 for this case.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add gEdkiiS3SmmInitDoneGuid, after S3 SMM initialization is done and
before S3 boot script is executed, this GUID is installed as PPI in
PEI and protocol in SMM environment. It allows for PEIMs or SMM
drivers to hook this point and do the required tasks.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
when the SECTION FV_IMAGE = $(XX)/XX.Fv, the Fv file should relative to
WORKSPACE, so when we search the XX.Fv.txt file, we should search the
path relative to workspace first.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
For the case that the structure PCD has no value assignment in DSC,
but has value assignment in command line.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Case 1. A Pcd has no default sku setting in DSC.
Case 2. Build as Single SKU.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. Handle the Pcd maxsize issue for the case
that the length of Pcd value from CommandLine
bigger that its maxsize
2. The Pcd value override in commandline.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
DSC Components section support flexible PCD, and for binary driver, we
need patch this value. Update the split char ',' not ', ' because some
value may have space, while others may not have this space.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
v3: LaneEqualizationControl is changed to be an array.
v2: The structure is updated to include all the fields defined
in the PCI-E specification.
The header includes Physical Layer PCI Express Extended Capability definitions
described in section 7.7.5 of PCI Express Base Specification rev. 4.0.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Felix Polyudov <felixp@ami.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The default value of PcdExtFpdtBootRecordPadSize is 0x20000
But the following commit in master update it to 0 by mistake.
SHA-1: 052c98ce24
Subject: MdeModulePkg: Add ResetSystemPei PEIM
This patch is to restore the value.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Currently DxeCorePerformanceLib will get SMM performance data based
on SMM communication handler. If SMM communication handler returns error,
the library will ASSERT. In fact, if SMM perf data is not found.
DXE perf data can still be dumped. So using status check instead of
ASSERT is better.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The previous commit 137ed15511
* MdeModulePkg/DebugLib: Print partial when format string is too long
copies partial format string to DEBUG_INFO buffer but when parsing
the format modifier, the original format string is still used.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The issue was enrolled by the commit of ceec3638. One of the change in the commit
was to return the status from NetMapIterate in Udp6Groups function. But it should
not return EFI_ABORTED directly in case McastIp is not NULL, which means to terminate
the iteration and leave the McastIp successfully.
Cc: Wang Fan <fan.wang@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
For IPv6 case, if one invalid URL returned from DHCP server, HttpBootDxe
driver could not retrieve the URL host address from DNS server. In such a
case, the error message should be printed as:
Error: Could not retrieve the host address from DNS server.
Instead of:
Error: Could not discover the boot information for DHCP server.
Then, we can still output as following:
Error: Could not retrieve NBP file size from HTTP server.
Besides, currently implementation in HttpBootLoadFile will always output
error message even the HTTP process is correct.
This patch is to fix above issue.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The root cause is the byte array value in the driver Pcd, some bytes
have additional space character, while the value in DSC file doesn't
have this space, it cause the string compare return false, so we remove
the extra space.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When run GenFds, GlobalData.gConfDirectory is None, On Linux
self._ToolChainFamily default Value is "MSFT", and then
generate the wrong PcdValueInit Makefile
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Neither the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL nor the EFI_CPU_IO2_PROTOCOL
impose any restrictions when it comes to the range of valid I/O
addresses. Even so, the 'mm' command in -IO mode refuses to perform
accesses to addresses >= 0xffff.
It is not up to 'mm' to impose this restriction, so remove it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
When generate build report, Tool will get the info like size, Fv Name,
etc from the xx.Fv.txt file and add these info into the build report.
This patch support the xx.Fv.txt to use absolute file path format since
user may provide specified FV path.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Instead of completely removing the memory occupied by the primary PrePi
FV from the memory map, thereby making it inaccessible to the OS, mark
it as boot services data. This will ensure that the memory is left
untouched by the firmware, but will release it to the OS when it calls
ExitBootServices().
Note that for reasons that are not entirely clear, this only works as
desired if the memory allocation HOB and the resource descriptor HOB
that describe the region are identical in offset and size, and so we
still need to iterate over the descriptors and split them up.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Commit 8ae5fc1829 ("ArmPlatformPkg/MemoryInitPeiLib: don't reserve
primary FV in memory") deleted the code that removes the memory covering
the primary firmware volume from the memory map. The assumption was that
this is no longer necessary now that we no longer expose compression and
PE/COFF loader library code from the PrePi module to DXE core.
However, the FV is still declared, and so code may attempt to access it
anyway, which may cause unexpected results depending on whether the
memory has been reused for other purposes in the mean time. So revert
this change in preparation of dealing with this in a better way.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Optimized the PcdValueInit.c size by abstract the common logic in the funciton.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
If Structure PCD field is assigned as GUID format, its data type should be
the fixed GUID structure. No flexible check is required.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add cache for building PcdValueInit.c. If PcdValueInit.c is not changed,
it will not be regenerated.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. the issue in the overriding value from command line.
2. dec fully value < dec field assign value <
dsc fully value < dsc field assign value
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Clang's preprocessor behaves differently from GCC's, and produces
intermediate device tree source that still contains #pragma pack()
and other directives that the device tree compiler chokes on.
For assembling device tree sources, it matters very little which
preprocessor is being used, so let's just use GNU CPP explicitly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This issue is introduced at following commit, which tried to add stack
switch support on behalf of Stack Guard feature.
0ff5aa9cae
The field KnownGoodStackTop in CPU_EXCEPTION_INIT_DATA is initialized to
the start address of array mNewStack. This is wrong. It must be the end
of mNewStack. This patch fixes this mistake.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The case is: define a VOID* pcd in DEC file, eg: Value is {0x1}.
then override this PCD on DSC component section, eg: Value is
{0x1, 0x2, 0x3}, the max size of this PCD is calculate wrong
which cause build error.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
v2: Add [LibraryClasses] section in INF file and refine coding style.
There are VS2015 NOOPT IA32 build failure like below in BaseSafeIntLib.
XXX.lib(XXX.obj): error LNK2001: unresolved external symbol __allmul
XXX.lib(XXX.obj): error LNK2001: unresolved external symbol __allshl
XXX.lib(XXX.obj): error LNK2001: unresolved external symbol __aullshr
This patch replaces direct shift/multiplication of 64-bit integer
with related function call to fix these failure.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
1.The " and ' inside the string, must use escape character format
(\", \')
2.'string' and L'string' format in --pcd, it must be double quoted
first.
Some examples that to match --pcd format and DSC format
--pcd DSC format
L"ABC" L"ABC"
"AB\\\"C" "AB\"C"
"AB\\\'C" "AB\'C"
L"\'AB\\\"C\'" L'AB\"C'
"\'AB\\\'C\'" 'AB\'C'
H"{0, L\"AB\\\"B\", \'ab\\\"c\'}" {0, L"AB\"B", 'ab\"c'}
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
DebugEntry FileOffset is required to be updated to the virtual address if
the input image is converted to XIP image.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
For structure PCD, its field name is wrong and cause build failure. Its
build error message will output to let user aware what's wrong.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Feng Bob C <bob.c.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
New GUID definition is conflicted with GUID in Windows Kits guiddef.h.
GUID definition will be defined when it is undefined.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
CR3 has been used as structure field name in BaseLib IA32_TASK_STATE_SEGMENT.
Undefine CR3 to make sure there is no conflict to it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The issue that *_*_*_MAKE_FLAGS doesn't work in DSC [BuildOptions]
section. It means MAKE flags can't be set in platform DSC file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=650
Today's implementation converts the untested more reliable memory
from reserved GCD type to system memory GCD type.
Though it doesn't impact the return result of gBS->GetMemoryMap().
But it impacts the return result of gDS->GetMemorySpaceDescriptor().
The patch fixes the bug to convert the untested more reliable memory
from reserved GCD type to more reliable memory GCD type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=650
Today's implementation converts the untested more reliable memory
from reserved GCD type to system memory GCD type.
Though it doesn't impact the return result of gBS->GetMemoryMap().
But it impacts the return result of gDS->GetMemorySpaceDescriptor().
The patch fixes the bug to convert the untested more reliable memory
from reserved GCD type to more reliable memory GCD type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The updated Length value should be returned
for EFI_BUFFER_TOO_SMALL case.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
If PEIM image address doesn't meet with its section alignment, it will
load fail. PeiCore adds more debug message to report it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The commit places the check for MediaId at the beginning of Block IO
services:
RamDiskBlkIoReadBlocks and
RamDiskBlkIoWriteBlocks
This aligns with the Block IO protocol implementations for other
devices.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
For structure PCD, the field value may override in the command line,
so in the report when we print the field info we add *B Flag for those
field.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Use 2 passes when evaluating PCD values to discover
all the LABEL() operators and compute the byte offset
of each LABEL(). The 2nd pass then has the information
to replace the OFFSET_OF() operator with the computed
byte offset. The 2 passes allows OFFSET_OF() to be used
before a LABEL() is declared.
fixes:https://bugzilla.tianocore.org/show_bug.cgi?id=880
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Switch all users of ArmVirt.dsc.inc to the new DebugLib implementation
that was created especially for DXE_RUNTIME_DRIVER modules, ensuring
that DEBUG() calls do not touch the UART at runtime.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Introduce a variant of BaseDebugLibSerialPort that behaves correctly with
regards to the use of the serial port after ExitBootServices(). At boot
time, all DEBUG() prints and ASSERT() invocations are executed normally.
At runtime, DEBUG() prints are dropped entirely, and ASSERT()s omit the
serial output as well, and only perform the configured post-ASSERT()
action, i.e., issue a CPU breakpoint or enter a deadloop.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Turns out all .vfr files in the tree interacting with DynamicPcds
manually copy the same set of EFI_VARIABLE_* definitions, since the rest
of UefiMultiPhase.h is incompatible with VfrCompile.
For now, reshuffle these definitions to the start of the file, and put
the rest of the file behind #ifndef VFRCOMPILE to permit direct
inclusion in .vfr source files.
https://bugzilla.tianocore.org/show_bug.cgi?id=878 has been raised to
request VfrCompile is extended to support the original format.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Issue:
Reply for first ping packet was getting dropped.
Cause:
Sometimes reply message comes even before trasmit
function returns, hence missing 1st reply
Fix:
Prepare the TxList before calling Transmit function.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
when defined SKUID_IDENTIFIER = DEFAULT|TEST in DSC [Defines] section,
per spec it means current SKUID is single, the bug is build report print
both DEFAULT and TEST info, it should only print TEST.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Per FDF spec, INF statement must use a .inf file, we add this error
check.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Original BaseTools source build append WindowsLike path to PATH Env,
while WINDDK installation has a "build.exe", if user place WINDDK
folder to PATH either during WINDDK installation or manually, it will
block the BaseTools' build.bat.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
If we have to negate UnsignedResult (due to exactly one of Multiplicand
and Multiplier being negative), and UnsignedResult is exactly
MIN_INT64_MAGNITUDE (value 2^63), then the statement
*Result = - ((INT64)UnsignedResult);
invokes both implementation-defined behavior and undefined behavior.
First, MIN_INT64_MAGNITUDE is not representable as INT64, therefore the
result of the (inner) conversion
(INT64)MIN_INT64_MAGNITUDE
is implementation-defined, or an implementation-defined signal is raised,
according to ISO C99 6.3.1.3p3.
Second, if we assume that the C language implementation defines the
conversion to INT64 simply as reinterpreting the bit pattern
0x8000_0000_0000_0000 as a signed integer in two's complement
representation, then the conversion immediately produces the negative
value MIN_INT64 (value -(2^63)). In turn, the (outer) negation
-(MIN_INT64)
invokes undefined behavior, because the mathematical result of the
negation, namely 2^63, cannot be represented in an INT64 object. (Not even
mentioning the fact that the mathematical result would be incorrect.) In
practice, the undefined negation of MIN_INT64 happens to produce an
unchanged, valid-looking result on x86, i.e. (-(MIN_INT64)) == MIN_INT64.
We can summarize this as the undefined -- effectless -- negation canceling
out the botched -- auto-negating -- implementation-defined conversion.
Instead of relying on such behavior, dedicate a branch to this situation:
assign MIN_INT64 directly. The branch can be triggered e.g. by multiplying
(2^62) by (-2).
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
The definition of the MIN_INT64_MAGNITUDE macro is correct, but it's
harder to read than necessary: the sub-expression
(( (UINT64) - (MIN_INT64 + 1) ))
is doubly parenthesized. Reusing one pair of the outer parens, rewrite the
sub-expression (without change in meaning) so that the minus sign cannot
be mistaken for subtraction:
( (UINT64)(- (MIN_INT64 + 1)) )
The resultant macro definition matches the following expressions in
SafeInt64Mult():
> //
> // Avoid negating the most negative number.
> //
> UnsignedMultiplicand = ((UINT64)(- (Multiplicand + 1))) + 1;
and
> //
> // Avoid negating the most negative number.
> //
> UnsignedMultiplier = ((UINT64)(- (Multiplier + 1))) + 1;
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
The addition in the assignment
SignedResult = Augend + Addend;
is performed with unchecked INT64 operands. According to ISO C, if the
mathematical result of signed integer addition cannot be represented in
the result type, the behavior is undefined. (Refer to ISO C99 6.5p5.
6.2.5p9 only exempts unsigned integers, and 6.3.1.3p3 does not apply
because it treats the conversion of integers that have been successfully
evaluated first.)
Replace the after-the-fact result checking with checks on the operands,
and only perform the addition if it is safe.
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
The subtraction in the assignment
SignedResult = Minuend - Subtrahend;
is performed with unchecked INT64 operands. According to ISO C, if the
mathematical result of signed integer subtraction cannot be represented in
the result type, the behavior is undefined. (Refer to ISO C99 6.5p5.
6.2.5p9 only exempts unsigned integers, and 6.3.1.3p3 does not apply
because it treats the conversion of integers that have been successfully
evaluated first.)
Replace the after-the-fact result checking with checks on the operands,
and only perform the subtraction if it is safe.
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
Commit a099239015 ("EmbeddedPkg/FdtLib: Update FdtLib to v1.4.5")
updated our FdtLib implementation to a more recent upstream version,
but omitted fdt_overlay.c due to its ambiguous licensing situation.
This has been resolved now, so take the latest upstream version of
the file (which received no other modifications in the mean time)
and add it to FdtLib.
Note that fdt_overlay.c has a dependency on strtoul() which EDK does
not provide natively, so add a private implementation that wraps the
BaseLib routines that do roughly the same.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In below calling stack:
UsbBootIsUnitReady()
UsbBootExecCmdWithRetry()
UsbBootExecCmd()
UsbBootRequestSense()
When USB CDROM is hot-plugged, UsbBootRequestSense() retrieves sense
key (6 = UnitAttention), additional sense code (29h = Power ON).
But it wrongly maps such sense data to Device Error status.
It causes UsbBootExecCmd() executed again.
In the second time call to UsbBootExecCmd(), UsbBootRequestSense()
retrieves sense key (6 = UnitAttention), additional sense code
(28h = media changed).
The above analysis explains why hot-plug USB CDROM cannot be
recognized after below commit:
SHA1 a662afb5b0
* MdeModulePkg/UsbStorage: Fix "map -r" cannot detect media change,
which removes the media changed status check in UsbBootDetectMedia().
The proper fix to this problem is to map the ASC (additional sense
code 29h) properly to success status so that no second call to
UsbBootExecCmd() is made.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
After commit 20ddbc133f
* MdeModulePkg/ConSplitter: ReadKeyStrokeEx always return key state
When one physical console supports to report the shift key state,
the key data returned from ConSplitter driver at least carries
the shift key valid bit.
The patch fixes the edit/hexedit to accept Unicode (1) when
the no shift key is pressed or reported.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Since the pointer subtraction here is not performed by pointers to
elements of the same array object. This might lead to potential issues,
such behavior is undefined according to C11 standard.
Refine the pointer subtraction expressions by casting each pointer to
UINTN first and then perform the subtraction.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
v2:
* Refine the error handling returned from GetVariable.
This patch is to read the HttpTlsCipherList variable and configure it for the
later HTTPS session.
If the variable is not set by any platform, EFI_NOT_FOUND will be returned
from GetVariable service. In such a case, the default CipherList created in
TlsDxe driver will be used.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Kinney Michael D <michael.d.kinney@intel.com>
Cc: Zimmer Vincent <vincent.zimmer@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
v2:
* Rename the file/variable name.
This variable (HttpTlsCipherList) can be set by any platform that want to
control its own preferred Tls CipherList for the later HTTPS session.
The valid contents of variable must follow the TLS CipherList format defined
in RFC 5246. The valid length of variable must be an integral multiple of 2.
For example, if below cipher suites are preferred:
CipherSuite TLS_RSA_WITH_AES_128_CBC_SHA256 = {0x00,0x3C}
CipherSuite TLS_RSA_WITH_AES_256_CBC_SHA256 = {0x00,0x3D}
Then, the contents of variable should be:
{0x00,0x3C,0x00,0x3D}
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Kinney Michael D <michael.d.kinney@intel.com>
Cc: Zimmer Vincent <vincent.zimmer@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
TimerLib had to be resolved in commit 5ab97a64b5 ("ShellPkg/bcfg: Add
Shell Spec 2.2 modification functionality", 2017-03-01) because:
- the BCFG command started making calls to UefiBootManagerLib
(EfiBootManagerVariableToLoadOption(),
EfiBootManagerLoadOptionToVariable(), EfiBootManagerFreeLoadOption()),
- and "MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf"
depended on TimerLib.
Because TimerLib is platform-specific, but "ShellPkg/ShellPkg.dsc" is
meant to produce a UEFI shell binary that is platform-independent (see
"ShellBinPkg/ReadMe.txt"), we resolved TimerLib to
"BaseTimerLibNullTemplate.inf". (TimerLib functionality was never actually
needed on UefiBootManagerLib code paths that were exercised by the shell /
BCFG.)
Thanks to the last patch, UefiBootManagerLib no longer depends on
TimerLib, thus we can drop the TimerLib resolution entirely.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
In commit 3a039a567a ("MdeModulePkg/UefiBootManagerLib: Remove the
useless perf codes", 2018-02-12), the BmWriteBootToOsPerformanceData()
function was removed. No TimerLib API calls are left, thus remove the
TimerLib class dependency from "InternalBm.h" and "UefiBootManagerLib.inf"
as well.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
These are listed under "ShellPkg/Application/Shell/Shell.inf", but they
have been commented out ever since commit 345a0c8fce ("OvmfPkg: Add
support for UEFI shell", 2011-06-26). No such lib classes exist in edk2.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=682
Edit and HexEdit commands assume that SimpleTxtIn translates
Ctrl+<Alpha-Key> key combinations into Unicode control characters
(0x1-0x1A).
Such translation does not seem to be required by the UEFI spec.
Shell should not rely on implementation specific behavior.
It should instead use SimpleTextInEx to read Ctrl+<Alpha-Key> key
combinations.
The patch changes edit and hexedit to only consumes SimpleTextInEx
so that the implementation specific behavior dependency is removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reported-by: Felix <felixp@mail.ru>
Cc: Felix <felixp@mail.ru>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Shell core was enhanced to find the manual string in PE resource
section. But the finding algorithm is too strict: If the manual is
written beginning with:
.TH command 0 "descripton of command"
but user types "COMMAND.efi -?". The finding algorithm uses
case-sensitive compare between "command" and "COMMAND" resulting
in the manual cannot be found.
The patch fixes this issue by using existing ManFileFindTitleSection
and ManFileFindSections which compare command case-insensitive.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Our new performance infrastructure (edk2 trunk commit hash value:
SHA-1: 73fef64f14 ~
SHA-1: 115eae650b) can support to
dump performance date form ACPI table in OS. So we can remove
the old perf code to write performance data to OS.
Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: zwei4 <david.wei@intel.com>
Our new performance infrastructure (edk2 trunk commit hash value:
SHA-1: 73fef64f14 ~
SHA-1: 115eae650b) can support to
dump performance date form ACPI table in OS. So we can remove
the old perf code to write performance data to OS.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Our new performance infrastructure (edk2 trunk commit hash value:
SHA-1: 73fef64f14 ~
SHA-1: 115eae650b) can support to
dump performance date form ACPI table in OS. So we can remove
the old perf code to write performance data to OS.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
V2: Just update the commit message to reference the hash value of
new performance infrastructure.
Our new performance infrastructure (edk2 trunk commit hash value:
SHA-1: 73fef64f14 ~
SHA-1: 115eae650b) can support to
dump performance date form ACPI table in OS. So we can remove
the old perf code to write performance data to OS.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
V2: Just update the commit message to reference the hash value of
new performance infrastructure.
Our new performance infrastructure (edk2 trunk commit hash value:
SHA-1: 73fef64f14 ~
SHA-1: 115eae650b) can support to
dump performance date form ACPI table in OS. So we can remove
the old perf code to write performance data to OS.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
V2: Just update the commit message to reference the hash value of
new performance infrastructure.
Our new performance infrastructure (edk2 trunk commit hash value:
SHA-1: 73fef64f14 ~
SHA-1: 115eae650b)can support to
dump performance date form ACPI table in OS. So we can remove
the old perf code to write performance data to OS.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=800
Based on content from the following branch/commits:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport33bab4031aca516b1a612b9f111f2e
Use BmpSupportLib to convert a GOP BLT Buffer to the BMP graphics
image that is published in an ACPI BGRT table.
* Remove use of IndustryStandard/Bmp.h include file
* Remove mBmpImageHeaderTemplate. This is handled by BmpSupportLib
* Clean up code style with function prototypes at top
and all module global variables together
* Update SetBootLogo() to use SafeIntLib to check input parameters
for overflows.
* Remove internal function BgrtAcpiTableChecksum(). Use
CalculateCheckSum8() directly from BgrtReadyToBootEventNotify()
* Remove InstallBootGraphicsResourceTable(). Move all the code into
BgrtReadyToBootEventNotify() that is signaled at ready to boot.
* Remove all logic that converts a GOP BLT buffer to a BMP graphics image
and use BmpSupportLib function TranslateGopBltToBmp() instead.
* Use AllocatePool() instead of AllocatePages() to allocate copy of
BMP image that is provided by BGRT. This is required to be compatible
with BmpSupportLib function TranslateGopBltToBmp() that uses
AllocatePool().
* Zero OemId in BGRT header before filling in value from PCD.
* Get size of PcdAcpiDefaultOemId and only copy the the size of the PCD
if it is smaller than the size of the OemId field in the BGRT header.
* Use WriteUnaligned24() instead of CopyMem() for the OemTableId field
of the BGRT header.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
Commit e537d878 meant to, but failed to, remove PcdCacheEnable.
Address this, and get rid of this obsolete flag.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Commit f72df138 got rid of the use of PcdCacheEnabled, but failed to
actually drop it as a dependency for BeagleBoardLib.
Get rid of it, so the module will still build when the Pcd is _really_
removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
V2: Just update the commit message.
Add more perf entry to hook BootScriptDonePpi/EndOfPeiPpi/
EndOfS3Resume.
Add the new perf entry with Identifier
PERF_INMODULE_START_ID/PERF_INMODULE_END_ID which are defined
in new performance infrastructure (edk2 trunk commit hash value:
SHA-1: 73fef64f14 ~
SHA-1: 115eae650b).
PERF_INMODULE_START_ID/PERF_INMODULE_END_ID are general Identifier
which are used within a module.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
For a structure with a series of bit fields and used as a storage
in vfr file, and if the bit fields do not add up to the size of
the defined type.In the C code use sizeof() to get size of the
structure, the results may vary form the compiler(VS,GCC...).
But the size of the storage calculated by VfrCompiler is fixed
(calculate with alignment).To avoid the issue cased by above case,
we need to make the total width of the bit fields in the structure
aligned with the size of the defined type for these bit fields.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The Reset Notification protocol is added in UEFI spec to support
reset notification mechanism in the DXE phase.
This patch adds similar EDKII specific Reset Notification PPI to PEI
phase to provide the same support.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Because DxeResetSystemLib links to this library to provide
reset system services, change UefiRuntimeLib to support
the same set of module types as what DxeResetSystemLib does.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
The library class that provides services to generate a GUID specific
reset, parse the GUID from a GUID specific reset, and build the
ResetData buffer for any type of reset that requires extra data.
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Add a PEI instance of ResetSystemLib that calls the ResetSystem2()
service in the PEI Services Table.
Add a DXE instance of ResetSystemLib that calls the ResetSystem()
service in the UEFI Runtime Services Table.
These 2 library instances should be the default ResetSystemLib
mapping for most PEIMs and DXE drivers so all reset system requests
go through the core service.
Only the implementation of the core servies should use the
platform specific instance of the ResetSystemLib that actually
performs the hardware actions to reset the platform.
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
The patch adds more debug message in ResetSystem().
It also removes unnecessary check of mResetNotifyDepth.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Add support for platform specific reset filters and platform
specific reset handlers to ResetSystem(). A filter may modify
the reset type and reset data and call ResetSystem() with the
modified parameters. A handler performs the reset action.
The support for platform specific filters and platform specific
handlers is based on the Reset Notification feature added to the
UEFI 2.7 Specification.
Platform specific reset filters are processed first so the final
reset type and reset data can be determined. In the DXE Phase
The UEFI Reset Notifications are processed second so all UEFI
Drivers that have registered for a Reset Notification can perform
any required clean up actions. The platform specific reset
handlers are processed third. If there are no registered
platform specific reset handlers or none of them reset the
platform, then the default reset action based on the
ResetSystemLib is performed.
In the PEI Phase, filters and handlers are registered through
the following 2 PPIs that are based on
EFI_RESET_NOTIFICATION_PROTOCOL.
* gEdkiiPlatformSpecificResetFilterPpiGuid
* gEdkiiPlatformSpecificResetHandlerPpiGuid
In the DXE Phase, filters and handlers are registered through
the following 2 Protocols that are based on
EFI_RESET_NOTIFICATION_PROTOCOL.
* gEdkiiPlatformSpecificResetFilterProtocolGuid
* gEdkiiPlatformSpecificResetHandlerProtocolGuid
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Add the PeiServicesResetSytstem2() function to the PeiServiesLib
to call the ResetSystem2() services in the PEI Services Table.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
As per PI specification v1.6,
As per section 2.1.4.1,
The following file types exist:
Table 3. Defined File Types
Name Value
EFI_FV_FILETYPE_RAW 0x01
EFI_FV_FILETYPE_FREEFORM 0x02
EFI_FV_FILETYPE_SECURITY_CORE 0x03
EFI_FV_FILETYPE_PEI_CORE 0x04
EFI_FV_FILETYPE_DXE_CORE 0x05
EFI_FV_FILETYPE_PEIM 0x06
EFI_FV_FILETYPE_DRIVER 0x07
EFI_FV_FILETYPE_COMBINED_PEIM_DRIVER 0x08
EFI_FV_FILETYPE_APPLICATION 0x09
EFI_FV_FILETYPE_MM 0x0A
EFI_FV_FILETYPE_FIRMWARE_VOLUME_IMAGE 0x0B
EFI_FV_FILETYPE_COMBINED_MM_DXE 0x0C
EFI_FV_FILETYPE_MM_CORE 0x0D
EFI_FV_FILETYPE_MM_STANDALONE 0x0E
EFI_FV_FILETYPE_MM_CORE_STANDALONE 0x0F
The following new section type is added:
EFI_SECTION_MM_DEPEX
This patch adds the management mode FV file type and depex.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Today's McaInitialize() doesn't check State value before initialize
MCi_CTL and MCi_STATUS.
The patch fixes this issue by only initializing the two kinds of
MSRs when State is enabled.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
An ordinary empty directory should contain "." and ".." entries.
When an empty directory even doesn't contain "." or ".." entry,
FileHandleFindFirstFile() may return error status and a NULL
FileInfo.
IsDirectoryEmpty() implementation in Rm.c doesn't consider this
case and the deference of FileInfo->FileName causes page fault
exception because FileInfo is NULL.
The patch checks the return status of FileHandleFindFirstFile()
to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
HDiskImageSetDiskNameOffsetSize() and HFileImageSetFileName()
may be called using the current disk name or file name.
When this happens, today's implementation firstly frees the memory
and then accesses the just-freed memory.
The patch fixes this issue by doing nothing when the disk or file
name is the current one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Fix GCC build failures below.
variable 'EvtTrb' set but not used [-Werror=unused-but-set-variable]
variable 'Index' set but not used [-Werror=unused-but-set-variable]
The build failure could only be caught with -D SOURCE_DEBUG_USE_USB3
build flag.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
"Platform.h" declares the AmdSevInitialize() function without EFIAPI, but
the definition in "AmdSev.c" includes EFIAPI.
GCC toolchains without LTO do not catch this error because "AmdSev.c" does
not include "Platform.h"; i.e. the declaration used by callers such as
"Platform.c" is not actually matched against the function definition at
build time.
With LTO enabled, the mismatch is found -- however, as a warning only, due
to commit f8d0b96629 ("BaseTools GCC5: disable warnings-as-errors for
now", 2016-08-03).
Include the header in the C file (which turns the issue into a hard build
error on all GCC toolchains), plus sync the declaration from the header
file to the C file.
There's been no functional breakage because AmdSevInitialize() takes no
parameters.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: 13b5d743c8
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
"Compress.h" declares the Compress() function as EFIAPI, but the
definition in "Compress.c" lacks EFIAPI.
GCC toolchains without LTO do not catch this error because "Compress.c"
does not include "Compress.h"; i.e. the declaration used by callers such
as "EfiCompress.c" is not actually matched against the function definition
at build time.
With LTO enabled, the mismatch is found -- however, as a warning only, due
to commit f8d0b96629 ("BaseTools GCC5: disable warnings-as-errors for
now", 2016-08-03).
Include the header in the C file (which turns the issue into a hard build
error on all GCC toolchains), plus sync the declaration from the header
file to the C file. Finally, remove EFIAPI from both declaration and
definition -- this was the original intent of commit c4e74e9b81
("ShellPkg/UefiShellDebug1CommandsLib: Remove unnecessary EFIAPI",
2016-10-09), but it missed the header file.
(Gary meant to address that omission in Oct 2017:
[edk2] [PATCH] ShellPkg/UefiShellDebug1CommandsLib: Remove EFIAPI from
Compress()
http://mid.mail-archive.com/20171026065329.32311-1-glin@suse.com
and Ray reviewed the patch, but then the patch was never committed.)
So do the sync and drop EFIAPI now.
This happens to fix the EFICOMPRESS shell command, when built with GCC for
X64.
Cc: Gary Lin <glin@suse.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Fixes: c4e74e9b81
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Case1: Cover the Tool PATH is not exist, eg: build MdeModule under GCC5
toolchain and IPF arch.
Case2: Cover the Tool FLAGS is not exist, eg: build OvmfPkg under
CLANG35 toolchain and X64 arch.
fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=595
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Pointer subtraction is not performed by pointers to elements of the same
array object. Such behavior is undefined by C11 standard and might lead to
potential issues, Refine pointer subtraction by first casting each pointer
to UINTN.
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Today's implementation only assumes SandyBridge CPU supports
Extended On-Demand Clock Modulation Duty Cycle.
Actually it is supported when CPUID.06h.EAX[5] == 1.
When platform requests 50% throttling, it causes value 1000b
set to the low-4 bits of IA32_CLOCK_MODULATION.
But the wrong code sets 1000b to bits[1-3] which causes assertion.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jeff Fan <vanjeff_919@hotmail.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
V3:
a. Remove unused definitions
b. Get records size form the records buffer when getting size action
is triggered.
V2:
Update FirmwarePerformanceSmm to receive the address
of performance records instead of records content.
Receive buffer address of Boot performance records
which are reported by SmmCorePerformanceLib.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V4:
Update the GUID for status code in DxeCorePerformanceLib and
FirmwarePerformanceDxe.
V3:Add handling for the case when performance feature is not enabled.
V2:
Update FirmwarePerformanceDxe to receive the address
of performance records instead of records content.
1. Remove the macro EXTENSION_RECORD_SIZE, since the extension
size can be got through PcdExtFpdtBootRecordPadSize.
2. Hook EFI_SW_DXE_BS_PC_READY_TO_BOOT_EVENT to install ACPI table
3. Copy SMM record accord to the allocated size
4. Receive Boot performance table address instead of
contents which are reported DxeCorePerformanceLib.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V3:
a. Handle the case when string is empty in String Record.
b. Use gEdkiiFpdtExtendedFirmwarePerformanceGuid to report status
code.
c. Refine the code logic.
V2:
Update SmmCorePerformanceLib to report the buffer address of
boot performance records instead of records contents.
Updated to convert Pref entry to FPDT record in SMM phase and then
export records to FPDT table.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V4:
a.Update the GUID for status code in DxeCorePerformanceLib and
FirmwarePerformanceDxe.
b. Add check for Insert FPDT record in DxeCorePerformanceLib
to avoid re-entry case.
V3:
a. Handle the case when string is empty in String Record.
b. refine the code logic.
V2:
Update DxecorePerformanceLib to report the boot performance table
address instead of records contents.
Updated to convert Pref entry to FPDT record in DXE phase and then
allocate boot performance table to save the record and report
the address of boot performance table to FirmwarePerformanceDxe.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V3:Handle the case when string is empty in String Record.
Updated to convert Pref entry to FPDT record in PEI phase and then
report the records to DxeCorePerfLib through GUID hob.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
> v2:
> Reduce the number of page to update/restore from 3 to 2 because DF
> has no effect in this issue.
The infinite loop is caused by the memory instruction, such as
"rep mov", operating on memory block crossing boundary of NON-PRESENT
pages. Because the address triggering page fault set in CR2 will be in
the first page, SmmProfilePFHandler() will only change the first page
into PRESENT. The page following will be still in NON-PRESENT status.
Since SmmProfilePFHandler() will setup single-step trap for the
instruction causing #PF, when the handler returns back to the
instruction and re-execute it, both #DB and #PF will be triggered
because the instruction wants to access both first and second page
but only first page is PRESENT.
Normally #DB exception will be handled first and its handler will
change first page back to NON-PRESENT status. Then #PF is handled
and its handler will change first page to PRESENT status again and
setup another single-step for the instruction triggering #PF. Then
the whole system falls into an infinite loop and the memory operation
will never move on.
This patch fix above situation by always changing 2 pages to PRESENT
status instead of just 1 page. Those 2 pages include the page causing
#PF and the page after it.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The Heap Guard feature wrapped SmmInternalFreePagesEx with
SmmInternalFreePagesExWithGuard but didn't add necessary
parameter check. This patch fixes this situation.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Initialize local variable to suppress warning C4703:
potentially uninitialized local pointer variable.
Both reads (dereferences) of "PciRootBridgeIo" in
PciBusDriverBindingStart() are only reached if
"gFullEnumeration" is TRUE on entry *and* we successfully
open the EfiPciRootBridgeIoProtocol interface.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
When structurePCD only has overall value assigned
in Dsc under different SKU, the value under default sku is used.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
If the PCD is not used in DSC file and user set
that PCD value from Command line, build will fail.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. Check variable offset when merging Hii Pcds
2. Fixed the issue of Hii value inherit with default store.
3. Error handling for incorrect structure pcd declare.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Currently, the FV image size is not enough for the modules after
we enable some flags defined in Nt32Pkg.dsc, e.g:
DEFINE SECURE_BOOT_ENABLE = TRUE
DEFINE TLS_ENABLE = TRUE
DEFINE NETWORK_IP6_ENABLE = TRUE
This patch is to increase the size of FLASH Device to meet the requirement.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Install IOMMU PPI for pre-memory phase and return
EFI_NOT_AVAILABLE_YET to indicate that DMA protection has been enabled,
but DMA buffer are not available to be allocated yet.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Install IOMMU PPI for pre-memory phase and return
EFI_NOT_AVAILABLE_YET to indicate that DMA protection has been enabled,
but DMA buffer are not available to be allocated yet.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Then the consumer of IoMmu PPI has opportunity to get granted DMA
buffer (by callback) to replace old buffer before it is forbidden
by enabling PMR.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
We duplicate the Assembly-Code-File section from build_rule.template
because --convert-hex cannot be used with the MSFT ARM assembler.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Liming Gao <liming.gao@intel.com>
VA_START, VA_END and VA_COPY are the same as the generic macros.
VA_ARG was reverse engineered from MS ARM assembly output.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Introduce CRT assembly replacements for __rt_sdiv, __rt_udiv,
__rt_udiv64, __rt_sdiv64, __rt_srsh (by reusing the RVCT code)
as well as memcpy and memset.
For MSFT compatibility, some of the code needs to be explicitly
forced to ARM, and the /oldit assembly flag needs to be added.
Also, while RVCT_ASM_EXPORT macro invocations have been removed,
the replacement code is designed to be as close as possible to
the one that would have been generated if using the macros.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Most of the RVCT assembly can be reused as is for MSFT except
for CpuBreakpoint.asm, which we need to force to Arm mode.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Liming Gao <liming.gao@intel.com>
We disable the exact same warnings as IA32 and X64.
Also create a dummy macro for PRESERVE8, as this is not supported by
the Microsoft ARM assembler.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When the format of DEVICE_PATH have string, like as:
{DEVICE_PATH("BBS(1,"AB",0)")} have string "AB", will
get the wrong value.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
EBC build failure is caused by d7a09cb86a.
It changes MAX_UINTN and MAX_ADDRESS definition as below. VarCheckUefiLib
and DxeCore uses MAX_UINTN and MAX_ADDRESS in the global data initialization.
New style has >> operator, and not supported by EBC compiler.
The fix is not to build VarCheckUefiLib and DxeCore for EBC arch.
#define MAX_UINTN ((UINTN) ~0)
==>
#define MAX_UINTN ((UINTN)(~0ULL >> (64 - sizeof (INTN) * 8)))
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
EBC build failure is caused by d7a09cb86a.
It changes MAX_UINTN definition as below. AuthVariableLib uses MAX_UINTN
in the global data initialization. New style has >> operator, and not
supported by EBC compiler. The fix is not to build AuthVariableLib for EBC.
#define MAX_UINTN ((UINTN) ~0)
==>
#define MAX_UINTN ((UINTN)(~0ULL >> (64 - sizeof (INTN) * 8)))
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Currently, the GIC driver has a static dependency on the CPU arch protocol
driver, so it can register its IRQ handler at init time. This means there
is a window between dispatch of the CPU driver and dispatch of the GIC
driver where any unexpected GIC state may trigger an interrupt which we
are not set up to handle yet. Note that this is even the case if we enter
UEFI with interrupts disabled at the CPU, given that any TPL manipulation
involving TPL_HIGH_LEVEL will unconditionally enable IRQs at the CPU side
regardless of whether they were enabled to begin with (but only as soon as
the CPU arch protocol is actually installed)
So let's reorder the GIC driver with the CPU driver, and let it run its
initialization that puts the GIC into a known state before enabling
interrupts. Move its installation of its IRQ handler to a protocol notify
callback on the CPU arch protocol so that it runs as soon as it becomes
available.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Delete a bunch of Pcds, a guid, and a related header file - probably Ebl
related.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
HalRuntimeServicesExampleLib contains no .inf and none of its contents
are included elsewhere - so get rid of it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
A bunch of Ebl-related Pcds are still referenced in package
Pcd. Drop them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
gEfiDebugSupportPeriodicCallbackProtocolGuid and
PcdCpuDxeProduceDebugSupport are referred to from CpuDxe.
Delete references from .inf and .h.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Drop a bunch of unused EmbeddedPkg Pcds, including one used
in local code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
ArmVirt.dsc.inc sets gEmbeddedTokenSpaceGuid.PcdCacheEnable,
which is unused and about to be deleted. Drop it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
By default, the device tree compiler emits phandle properties twice:
once called 'phandle' and again called 'linux,phandle'. Given that
Linux was updated in early 2010 [0] to accept the former (which is
what is specified in the ePAPR and device tree specifications), there
is no point in emitting both when compiling device trees for UEFI
platforms.
[0] 04b954a673dd02f585a2769c4945a43880faa989
"of/flattree: Make the kernel accept ePAPR style phandle information"
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The below code reads additional one CHAR16 when copying
content from Specific to NewSpecific.
NewSpecific = AllocateCopyPool(
StrSize(Specific) + sizeof(CHAR16), Specific
);
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Today's implementation of [Ascii]StrnCpyS/[Ascii]StrnCatS calls
StrnLenS () to get the length of source string but supplies the
destination buffer size as max size.
It's a bug that may cause out-of-bound memory access.
For example:
StrnCpyS (Dest[10], 10, "hello", 6)
-> StrnLenS ("hello", 10) //< cause out-of bound memory access
In a pool guard enabled environment, when using shell to edit an
existing file which contains empty line, the page fault is met.
The patch fixes the four library functions to avoid such
out-of-bound memory access.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
When "FOR %a %a IN A B C" is executed,
CurrentScriptFile->CurrentCommand->Data is NULL.
But the code assumes it's not NULL and tries to
deference it.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Add a check for DatumType format, eg: VOID *, original Tool will crash
but no detail error message which cause confusion to user.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
HOST_ARCH has been moved into the common header.makefile
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
With this change, enter single tool directory, make can pass.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
In V2:
1) Update PeiAcpiTimerLib base name to PeiAcpiTimerLib
2) Update PeiAcpiTimerLib to add the missing constructor to enable ACPI IO space
3) Update DxeAcpiTimerLib to cache frequency in constructor.
PeiAcpiTimerLib caches PerformanceCounterFrequency in HOB, then Pei and Dxe
AcpiTimerLib can share the same PerformanceCounterFrequency.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
According to UEFI Spec, EFI_GRAPHICS_OUTPUT_PROTOCOL.Mode->Info->
PixelsPerScanLine may contain padding pixel elements outside the area
covered by HorizontalResolution for performance reasons or due to hardware
restrictions. CorebootPayloadPkg's FbGop driver doesn't follow this
requirement, and produces PixelsPerScanLine simply as
HorizontalResolution. This needs to be fixed to reflect the real length
of a framebuffer scanline.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Current PXE driver uses zero GUID if failed to get the system GUID from smbios
table, and some OS PXE boot may fail in such case. This patch is to add a warning
message to inform user that smbios table is missed on the platform.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Current PXE driver uses zero GUID if failed to get the system GUID from smbios
table, and some OS PXE boot may fail in such case. This patch is to add a warning
message to inform user that smbios table is missed on the platform.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Original VOID* type support L"string" and "string" format, now we also
add support for single quote string that without null terminator.
Type VOID* support L'a' and 'a', the value transfer to c style value.
L'a' --> {0x61, 0x00}
L'ab' --> {0x61, 0x00, 0x62, 0x00}
'a' --> {0x61}
'ab' --> {0x61, 0x62}
when the value is L'' or '' that not include any character, tool will
report error.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
SmiHandlerUnRegister() validates the DispatchHandle by checking
whether the first 32bit matches to a certain signature
(SMI_HANDLER_SIGNATURE).
But if a caller calls *UnRegister() twice and the memory freed by
first call still contains the signature, the second call may hang.
The patch fixes this issue by locating the DispatchHandle
in all SMI handlers, instead of checking the signature.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Refine the debug messages during the verification of microcode to make
them more clear.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Considering following scenario (both NX memory protection and heap guard
are enabled):
1. Allocate 3 pages. The attributes of adjacent memory pages will be
|NOT-PRESENT| present | present | present |NOT-PRESENT|
2. Free the middle page. The attributes of adjacent memory pages should be
|NOT-PRESENT| present |NOT-PRESENT| present |NOT-PRESENT|
But the NX feature will overwrite the attributes of middle page. So it
looks still like below, which is wrong.
|NOT-PRESENT| present | PRESENT | present |NOT-PRESENT|
The solution is checking the first and/or last page of a memory block to be
marked as NX, and skipping them if they are Guard pages.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
If enabled, NX memory protection feature will mark all free memory as
NX (non-executable), including page 0. This will overwrite the attributes
of page 0 if NULL pointer detection feature is also enabled and then
compromise the functionality of it. The solution is skipping the NX
attributes setting to page 0 if NULL pointer detection feature is enabled.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This issue is a regression one caused by a patch at
425d25699b
That fix didn't take the 0 page to free into account, which still
needs to call UnsetGuardPage() even no memory needs to free.
The fix is just moving the calling of UnsetGuardPage() to the place
right after calling AdjustMemoryF().
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Today's implementation only return key state when there is a key.
But when user doesn't press any key, the key state cannot be
returned.
The patch changes the ReadKeyStrokeEx() to always return the
key state even there is no key pressed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Today's implementation only return key state when there is a key.
But when user doesn't press any key, the key state cannot be
returned.
The patch changes the ReadKeyStrokeEx() to always return the
key state even there is no key pressed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Today's implementation only return key state when there is key.
But when user doesn't press any key, the key state cannot be
returned.
The patch changes the ReadKeyStrokeEx() to always return the
key state even there is no key pressed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Today's implementation only return key state when there is key.
But when user doesn't press any key, the key state cannot be
returned.
The patch changes the ReadKeyStrokeEx() to always return the
key state even there is no key pressed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Today's implementation only return key state when there is key.
But when user doesn't press any key, the key state cannot be
returned.
The patch changes the ReadKeyStrokeEx() to always return the
key state even there is no key pressed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
In SafeUintnToChar8(), update its output parameter name.
Update pui8Result --> Result to match its library implementation
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
SMM emulation under both KVM and QEMU (TCG) crashes the guest when the
"jz" branch, added in commit d4d87596c1 ("UefiCpuPkg/PiSmmCpuDxeSmm:
Enable NXE if it's supported", 2018-01-18), is taken.
Rework the propagation of CPUID.80000001H:EDX.NX [bit 20] to IA32_EFER.NXE
[bit 11] so that no code is executed conditionally.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: http://mid.mail-archive.com/d6fff558-6c4f-9ca6-74a7-e7cd9d007276@redhat.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
[lersek@redhat.com: XD -> NX code comment updates from Ray]
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
[lersek@redhat.com: mark QEMU/TCG as well in the commit message]
The SmmStartup() executes in SMM, which is very similar to real mode. Add
"BITS 16" before it and "BITS 32" after it (just before the @32bit label).
Remove the manual 0x66 operand-size override prefixes, for selecting
32-bit operands -- the sizes of our operands trigger NASM to insert the
prefixes automatically in almost every spot. The one place where we have
to add it back manually is the LGDT instruction. (The 0x67 address-size
override prefix is also auto-generated.)
This patch causes NASM to generate byte-identical object code (determined
by disassembling both the pre-patch and post-patch versions, and comparing
the listings), except:
> @@ -158,7 +158,7 @@
> 00000142 6689D3 mov ebx,edx
> 00000145 66B800000000 mov eax,0x0
> 0000014B 0F22D8 mov cr3,eax
> -0000014E 67662E0F0155F6 o32 lgdt [cs:ebp-0xa]
> +0000014E 2E66670F0155F6 o32 lgdt [cs:ebp-0xa]
> 00000155 66B800000000 mov eax,0x0
> 0000015B 0F22E0 mov cr4,eax
> 0000015E 66B9800000C0 mov ecx,0xc0000080
The only difference is the prefix list order, it changes from:
- 0x67, 0x66, 0x2E
to
- 0x2E, 0x66, 0x67
(0x2E is "CS segment override").
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The gSmmCr3, gSmmCr4, gSmmCr0 and gSmmJmpAddr global variables are used
for patching assembly instructions, thus we can't yet remove the DB
encodings for those instructions. At least we should add the intended
meanings in comments.
This patch only changes comments.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
[lersek@redhat.com: adapt commit msg to ongoing PatchAssembly discussion]
Current Pcd value support flexible format, this patch add support for
BPDG Tool to support L'' and '' format.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Spec required for VOID* VPD Pcd, Ascii string use byte alignment, byte
array use 8-byte alignment, unicode string use 2-byte alignment.
while when the VPD pcd offset use *, the offset generated in the .map
file not follow this rule.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
"Entry->Link.ForwardLink = NULL;" is present in RemoveMemoryMapEntry()
for DxeCore, that is correct.
"Entry->Link.ForwardLink = NULL;" is absent in RemoveOldEntry()
for PiSmmCore, that is incorrect.
Without this fix, when FromStack in Entry is TRUE,
the "InsertTailList (&mMapStack[mMapDepth].Link, &Entry->Link);" in
following calling to CoreFreeMemoryMapStack() will fail as the entry
at mMapStack[mMapDepth] actually has been removed from the list.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The Type field of EFI_ACPI_6_2_PPTT_STRUCTURE_PROCESSOR should
be UINT8 as ACPI version 6.2 specification.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <huangming23@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Invoke the newly introduced SD/MMC override protocol to override
the capabilities register after reading it from the device registers,
and to call the pre/post host init and reset hooks at the appropriate
times.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Many ARM based SoCs have integrated SDHCI controllers, and often,
these implementations deviate in subtle ways from the pertinent
specifications. On the one hand, these deviations are quite easy
to work around, but on the other hand, having a collection of SoC
specific workarounds in the generic driver stack is undesirable.
So let's introduce an optional SD/MMC override protocol that we
can invoke at the appropriate moments in the device initialization.
That way, the workaround itself remains platform specific, but we
can still use the generic driver stack on such platforms.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Fetch BytesPerScanLine from coreboot table to reflect how the actual
framebuffer is set up instead of guessing it from the horizontal
resolution.
This fixes a garbled display when HorizontalResolution * (BitsPerPixel
/ 8) and pFbInfo->BytesPerScanLine don't match.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
1. Expose _CRS, _SRS, _PRS control method to support TPM interrupt
2. Provide 2 PCDs to configure _CRS and _PRS returned data
Cc: Yao Jiewen <jiewen.yao@intel.com>
Cc: Ronald Aigner <Ronald.Aigner@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Original code locates the first UnicodeCollation instance in
DXE Core protocol database.
It's not correct considering multiple UnicodeCollation instances
exist in system.
The patch changes logic to find the one that matches the current
system language.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com.
The reason doing this is that we found that calling StartupAllAps() to
flush TLB for all APs in CpuDxe driver after changing page attributes
will spend a lot of time to complete. If there are many page attributes
update requests, the whole system performance will be slowed down
explicitly, including any shell command and UI operation.
The solution is removing the flush operation for AP in CpuDxe driver
and let AP flush TLB after woken up.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The reason doing this is that we found that calling StartupAllAps() to
flush TLB for all APs in CpuDxe driver after changing page attributes
will spend a lot of time to complete. If there are many page attributes
update requests, the whole system performance will be slowed down
explicitly, including any shell command and UI operation.
The solution is removing the flush operation for AP in CpuDxe driver.
Since TLB is always flushed in HLT loop mode, we just need to enforce
a TLB flush for mwait loop mode.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This issue is introduced by a patch at
f32bfe6d06
The above patch miss the case of 64-bit PEI, which will link
X64/MpFuncs.nasm instead of Ia32/MpFuncs.nasm. For X64/MpFuncs.nasm,
ExchangeInfo->ModeHighMemory should be always initialized no matter
if separate wakeup buffer is allocated or not. Ia32/MpFuncs.nasm will
not need ModeHighMemory during AP init. So the changes made in this
patch should not affect the functionality of it.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Commit f9669f09fb ("ArmPlatformPkg: retire obsolete PCDs") got rid of
the unfortunate ARM-specific variant of PcdFirmwareVendor.
However, BeagleBoard was still using it, so the change broke the build.
Fix this by moving BeagleBoard to use the MdeModulePkg one instead.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Every processor's StartupApSignal is initialized in
MpInitLibInitialize() before calling CollectProcessorCount().
When SortApicId() is called from CollectProcessorCount(), AP Index
is re-assigned by APIC ID. But SortApicId() forgets to set the
correct StartupApSignal when sorting the AP.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
The call in ProbeMediaStatusEx() to the ReadDisk() function of the
EFI_DISK_IO_PROTOCOL interface implemented in DiskIoDxe/DiskIo.c
crashed in DiskIo2ReadWriteDisk() because of the NULL value of
the destination buffer pointer.
Pass the address of a buffer in the stack instead of a NULL
pointer.
The similar fix was applied to ProbeMediaStatus in commit
df473cc1fc
* MdeModulePkg/PartitionDxe: Fix media probe
Somehow ProbeMediaStatusEx() wasn't changed together.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Tested-by: Jian J Wang <jian.j.wang@intel.com>
TotalSize must be multiples of 1024 bytes (1 KBytes) according to SDM.
Also enhance the debug message for DataSize that must be
multiples of DWORDs.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=798
SafeIntLib provides helper functions to prevent integer overflow
during type conversion, addition, subtraction, and multiplication.
Conversion Functions
====================
* Converting from a signed type to an unsigned type of the same
size, or vice-versa.
* Converting to a smaller type that could possibly overflow.
* Converting from a signed type to a larger unsigned type.
Unsigned Addition, Subtraction, Multiplication
===============================================
* Unsigned integer math functions protect from overflow and
underflow (in case of subtraction).
Signed Addition, Subtraction, Multiplication
============================================
* Strongly consider using unsigned numbers.
* Signed numbers are often used where unsigned numbers should
be used. For example file sizes and array indices should always
be unsigned. Subtracting a larger positive signed number from a
smaller positive signed number with SafeInt32Sub() will succeed,
producing a negative number, that then must not be used as an
array index (but can occasionally be used as a pointer index.)
Similarly for adding a larger magnitude negative number to a
smaller magnitude positive number.
* SafeIntLib does not protect you from such errors. It tells you
if your integer operations overflowed, not if you are doing the
right thing with your non-overflowed integers.
* Likewise you can overflow a buffer with a non-overflowed
unsigned index.
Based on content from the following branch/commits:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport21ef3a321cca516b1a6133bab4031a
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The VPD size is incorrect if that VPD is not used in Module.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Feng Bob C <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
If user not set Structure overall value in Dsc,
Structure Pcd value would be incorrect.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. The structure pcd default value should use the default value under sku.
2. Incorrect VpdOffset value for those un-used in module Vpd
3. Add a checkpoint for Structure Pcd Name
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
A pcd is initialized under one SKU but is uninitialized under another SKU.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When giving an invalid URI in Boot URI field within HTTP Boot
configuration page, the AsciiPrint will corrupt the setup screen.
This patch is to resolve the issue.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Karunakar P <karunakarp@amiindia.co.in>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
After HTTP boot successfully in home mode, the HTTP device path will be
updated accordingly. So, the new device path may be appended with a DNS
device path node. When executing home mode boot again, the original HTTP
device path will mismatch with the new updated one, which will cause the
HTTP boot failure. So, we need update the current match algorithm to match
the correct FilePath. Since the DNS device path is an optional, we can skip
it check.
This patch is to fix above issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
To fix an issue in which enabling NX feature will mark the AP wakeup
buffer as non-executable and fail the AP init, the buffer was split
into two part: the lower part in memory within 1MB and the higher part
within allocated executable memory (EfiBootServicesCode). But the
address of higher part memory was stored in lower part memory, which
is actually shared with legacy components and will be overwritten by
LegacyBiosDxe driver if CSM is enabled.
This patch fixes this issue by storing the address of higher part
memory in CpuMpData instead of ExchangeInfo.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In the for-loop condition of original code, the expression
*CurrentCommand != CHAR_NULL
is put before expression
CurrentCommand < SortedCommandList + SortedCommandListSize/sizeof(CHAR16)
When CurrentCommand walks to the end of string buffer, one more character
over the end of string buffer will be read and then stop.
To fix this issue, just move the last expression to the first one. Because
of short-circuit evaludation of and-expression, the following one
*CurrentCommand != CHAR_NULL
will not be evaluated if the expression before it is evaludated as FALSE.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The patch fixes flush cache issue in
CreateSecondLevelPagingEntryTable().
We found some video cards still not work even they have
been added to the exception list.
In CreateSecondLevelPagingEntryTable(), the check
"(BaseAddress >= MemoryLimit)" may be TRUE and "goto Done"
will be executed, then the FlushPageTableMemory operations
at the end of the function will be skipped.
Instead of "goto Done", this patch uses "break" to break
the for loops, then the FlushPageTableMemory operations
at the end of the function could have opportunity to be
executed.
The patch also fixes a miscalculation for Lvl3End.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Within function NvmExpressPassThru():
The data buffer for the below 2 Admin command:
Create I/O Completion Queue command (Opcode 01h)
Create I/O Submission Queue command (Opcode 05h)
are not mapped to the PCI controller specific addresses.
But the current code logic also prevents the below NVM command:
Write (Opcode 01h)
from mapping its data buffer.
Hence, this commit refine the logic to resolve this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
I was getting `HOST_ARCH` set using the linux arch name ("x86_64"), which
is different from the MS one ("X64").
It is not clear anyway we can proceed without valid build variables
(`ARCH_INCLUDE`, `BIN_PATH`, `LIB_PATH`, `SYS_BIN_PATH`, and
`SYS_LIB_PATH`).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chema Gonzalez <chemag@gmail.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Per PI spec, the PciEnumerationComplete protocol installation
should be after PciIo installation.
Today's implementation installs the PciEnumerationComplete
after hardware enumeration is completed, but before PciIo
installation.
The change corrects the spec/implementation gap.
The change also benefits certain implementation that depends on
the PciIo handle in PciEnumerationComplete callback.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The patch is just a code cleanup with no functionality impact.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
MtrrSetMemoryAttributesInMtrrSettings() is a batch-set API.
When setting multiple ranges of memory attributes, the single-set
API (MtrrSetMemoryAttributeInMtrrSettings and MtrrSetMemoryAttribute)
may fail, but batch-set API may succeed.
Add comments to recommend caller to use batch-set API when setting
multiple ranges.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Ming Shao <ming.shao@intel.com>
GetWakeupBuffer() tries to find a below-1M free memory, it checks
whether the memory is allocated already in
CheckOverlapWithAllocatedBuffer(). When there is a memory allocation
hob (base = 0xff_00000000, size = 0x10000000),
CheckOverlapWithAllocateBuffer() truncates the base to 0 which causes
it always returns TRUE so GetWakeupBuffer() fails to find a below-1MB
memory.
The patch fixes this issue by using UINT64 type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Edk2Setup.bat is out of maintain. It is a draft version batch file, and not
implement all features listed in its header file. To avoid the confuse,
drop it from edk2 project, and keep edksetup.bat only.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This patch add DefaultStore section format Check and it use same logic
with SKUID section.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch updated Skuid value to support both integer and hex value.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Previous build tool will display "processing meta-data ..." to let user
know the progress. this Patch add this string back.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Update package version of CryptoPkg to 0.98.
Cc: Ting Ye <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Ting Ye <ting.ye@intel.com>
Ironically, disabling warnings in the OpensslLib library build is
causing breakage when using the CLANG35 toolchain to build for ARM:
error: unknown warning option '-Werror=maybe-uninitialized'; did you mean '-Werror=uninitialized'? [-Werror,-Wunknown-warning-option]
So let's add -Wno-unknown-warning-option to the list of warnings to
ignore when using Clang 3.5, and move the same option from the x86
specific list to the shared list for Clang 3.8.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
UEFI2.7/PI1.6 have been added in MdePkg. Update DEC and DSC version to
reflect those changes in MdePkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
In time() wrapper implementation, the gRT->GetTime() call may be not
available. This patch adds the extra error handling to avoid the
potential dead loop.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When system boots to Shell without CDROM in the USB CDROM drive,
and then user inserts one CDROM with Eltorito file system,
"map -r" cannot show the the new Eltorito file system.
The root cause is when "map" command probes the media change
by calling dummy ReadBlockIo(), UsbMassStorage ReadBlockIo()
contains a bug that ignores the media change status:
UsbBootDetectMedia() ignores the EFI_MEDIA_CHANGED status
returned from UsbBootIsUnitReady(), in consequence, the
BlockIo protocol re-installation logic doesn't run.
By checking the code change history, below commit
SHA-1: 19bc852765
* remove unnecessary retry logic from usb mass storage driver.
adds the code to skip EFI_MEDIA_CHANGED status.
Talking with the original committer Tian Feng, he said the
change was just a code cleanup, not for a special bug fix.
So I revert part of the patch, only keep the change that
removes unnecessary retry logic. It can fix this bug.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
DscDefaultValue from Dsc file has been parsed by ValueExpressionEx
when Dsc file parse, so only DscDefaultValue from FDF file need
ValueExpressionEx parse
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
If features like memory profile, protection and heap guard are enabled,
a lot of more memory page attributes update actions will happen than
usual. An unnecessary sync of CR0.WP setting among APs will then cause
worse performance in memory allocation action. Removing the calling of
SyncMemoryPageAttributesAp() in function DisableReadOnlyPageWriteProtect
and EnableReadOnlyPageWriteProtect can fix this problem. In DEBUG build
case, the boot performance can be boosted from 11 minute to 6 minute.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
This hole will cause page fault randomly. The root cause is that Guard
page, which is just freed back to page pool but not yet cleared not-
present attribute, will be allocated right away by internal function
CoreFreeMemoryMapStack(). The solution to this issue is to clear the
not-present attribute for freed Guard page before doing any free
operation, instead of after those operation.
The reason we didn't do this before is due to the fact that manipulating
page attributes might cause memory allocation action which would cause a
dead lock inside a memory allocation/free operation. So we always set or
unset Guard page outside the memory lock. After a thorough analysis, we
believe clearing a Guard page will not cause memory allocation because
memory we're to manipulate was already manipulated before for sure.
Therefore there should be no memory allocation occurring in this
situation.
Since we cleared Guard page not-present attribute before freeing instead
of after freeing, the debug code to clear freed memory can now be restored
to its original way (aka no checking and bypassing Guard page).
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Section data alignment should be made in the build generation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Section data alignment should be made in the build generation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Section data alignment should be made in the build generation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
If PcdDxeNxMemoryProtectionPolicy is set to enable protection for memory
of EfiReservedMemoryType, the BIOS will hang at a page fault exception
triggered by BootScriptExecutorDxe.
The root cause is that this driver will allocate memory of
EfiReservedMemoryType and relocate itself into this new memory. Since
EfiReservedMemoryType of memory is marked non-executable, re-start this
driver after relocation will cause exception. The fix is removing the NX
attribute after memory allocation.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
If PcdDxeNxMemoryProtectionPolicy is set to enable protection for memory
of EfiReservedMemoryType, the BIOS will hang at a page fault exception
during starting SMM driver.
The root cause is that SMM RAM is type of EfiReservedMemoryType and
marked as non-executable. The fix is simply removing NX attribute for
those memory.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
If PcdDxeNxMemoryProtectionPolicy is set to enable protection for memory
of EfiBootServicesCode, EfiConventionalMemory, the BIOS will hang at a page
fault exception triggered by PiSmmCpuDxeSmm.
The root cause is that PiSmmCpuDxeSmm will access default SMM RAM starting
at 0x30000 which is marked as non-executable, but NX feature was not
enabled during SMM initialization. Accessing memory which has invalid
attributes set will cause page fault exception. This patch fixes it by
checking NX capability in cpuid and enable NXE in EFER MSR if it's
available.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
If PcdDxeNxMemoryProtectionPolicy is set to enable protection for memory
of EfiBootServicesCode, EfiConventionalMemory and EfiReservedMemoryType,
the BIOS will hang at a page fault exception randomly.
The root cause is that the memory allocation for driver images (actually
a memory type conversion from free memory, type of EfiConventionalMemory,
to code memory, type of EfiBootServicesCode/EfiRuntimeServicesCode)
will get memory with NX set, because the CpuDxe driver will keep the NX
attribute (with free memory) in page directory during page table splitting
and then override the NX attribute of all its entries.
This patch fixes this issue by not inheriting NX attribute when turning
a page entry into a page directory during page granularity split.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
If PcdDxeNxMemoryProtectionPolicy is set to enable protection for memory
of EfiBootServicesData, EfiConventionalMemory, the BIOS will reset after
timer initialized and started.
The root cause is that the memory used to hold the exception and interrupt
handler is allocated with type of EfiBootServicesData and marked as
non-executable due to NX feature enabled. This patch fixes it by allocating
EfiBootServicesCode type of memory for those handlers instead.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
If PcdDxeNxMemoryProtectionPolicy is set to enable protection for memory
of EfiBootServicesCode, EfiConventionalMemory, the BIOS will hang at a page
fault exception during MP initialization.
The root cause is that the AP wake up buffer, which is below 1MB and used
to hold both AP init code and data, is type of EfiConventionalMemory (not
really allocated because of potential conflict with legacy code), and is
marked as non-executable. During the transition from real address mode
to long mode, the AP init code has to enable paging which will then cause
itself a page fault exception because it's just running in non-executable
memory.
The solution is splitting AP wake up buffer into two part: lower part is
still below 1MB and shared with legacy system, higher part is really
allocated memory of BootServicesCode type. The init code in the memory
below 1MB will not enable paging but just switch to protected mode and
jump to higher memory, in which the init code will enable paging and
switch to long mode.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
In 32-bit mode, the BIOS will not create page table for memory beyond
4GB and therefore it cannot handle the attributes change request for
those memory. But current CpuDxe doesn't check this situation and still
try to complete the request, which will cause attributes of incorrect
memory address to be changed due to type cast from 64-bit to 32-bit.
This patch fixes this issue by checking the end address of input
memory block and returning EFI_UNSUPPORTED if it's out of range.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
We also got maybe-uninitialized warning when building OpensslLib.inf
with GCC48 for ARM and AARCH64, so add -Wno-error=maybe-uninitialized
build option just as other platforms.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Cc: Qin Long <qin.long@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Qin Long <qin.long@intel.com>
XCODE5 doesn't support absolute addressing in the assembly code.
This change uses lea instruction to get the address.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
A submodule allows to keep another Git repository in a subdirectory
of main repository. The submodule repository has its own history, which
does not interfere with the history of the current repository. This can
be used to have external dependencies such as third party libraries.
After the extra patch for EDKII-OpenSSL build was removed, OpenSSL can
be one typical submodule use case in EDKII project. This patch adds the
openssl git repository into EDKII project as one submodule.
One .gitmodules file will be generated with the submodule info:
[submodule "CryptoPkg/Library/OpensslLib/openssl"]
path = CryptoPkg/Library/OpensslLib/openssl
url = https://github.com/openssl/openssl
The user can use the following command to clone both main EDKII repo and
openssl submodule:
1) Add the "--recursive" flag to their git clone command:
$ git clone --recursive https://github.com/tianocore/edk2
or 2) Manually initialize and the submodules after the clone operation:
$ git clone https://github.com/tianocore/edk2
$ git submodule update -–init -–recursive
For Pull operations, "git pull" will not update the submodule repository.
So the following combined commands can be used to pull the remote submodule
updates (e.g. Updating to new supported OpenSSL release)
$ git pull –-recurse-submodules && \
git submodule update -–recursive --remote
Cc: Ye Ting <ting.ye@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Fix DMA does not work issue when system memory is not
greater than 4G.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Commits a2ea6894e6
* UefiCpuPkg/MpInitLib: Fix a bug that AP enters timer INT handler
masked the interrupts in AP.
But it didn't unmask the interrupt in new BSP when Switch BSP
happens.
The patch fixed this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Cc: Eric Dong <eric.dong@intel.com>
Get high top by host address width instead of resource HOB.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
mVtdHostAddressWidthMask is not been used at all,
its definition and related code could be removed.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
According to VTd spec, HostAddressWidth + 1 should be used as the real
host address width value.
Host Address Width:
This field indicates the maximum DMA physical
addressability supported by this platform. The
system address map reported by the BIOS
indicates what portions of this addresses are
populated.
The Host Address Width (HAW) of the platform is
computed as (N+1), where N is the value
reported in this field. For example, for a platform
supporting 40 bits of physical addressability, the
value of 100111b is reported in this field.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
According to VTd spec, the real hardware decoded limit should be
PHMR/PLMR.Limit value + alignment value.
"Bits N:0 of the limit register are
decoded by hardware as all 1s."
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
* In DxeIpIo, an ASSERT check is incorrectly used in IpIoAddIp(), which result
debug image hang when this API is called, this patch is to fix this issue.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Ovmf appended option -mno-mmx -mno-sse, but these two options were enabled
in Openssl. The compiler option becomes -mmmx ?msse -mno-mmx -mno-sse. It
trig mac clang compiler hang when compile one source file in openssl.
This issue is found when SECURE_BOOT_ENABLE is TRUE. This may be the compiler
issue. To work around it, don't add these two options for XCODE5 tool chain.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=849
In V2, use "mov rax, strict qword 0" to replace the hard code db.
1. Use lea instruction to get the address instead of mov instruction.
2. Use the dummy address as jmp destination, and add the logic to fix up
the address to the absolute address at boot time.
3. On MpFuncs.nasm, use ExchangeInfo to record InitializeFloatingPointUnits.
This way is same to MpInitLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
XCODE5 doesn't support absolute addressing in the assembly code.
This change uses lea instruction to get the address.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The Graphics Output Protocol's mode information specifies the
PixelsPerScanLine property. Most of the time this is identical to
HorizontalResolution. However, due to alignment requirements etc. it
may be slightly larger. I.e. each scan line will have some "pixels"
that are not visible on the screen but consume space in the frame
buffer.
If the graphics output protocol correctly initializes
HorizontalResolution to 1366 and PixelsPerScanLine to 1376. As a
result the graphics output is broken.
If setting HorizontalResolution to 1376 instead, the output is fine
(except for 10 invisible pixels on the right of the screen).
The patch fixes this bug by using PixelsPerScanLine when calculating
the line width.
Contributed-under: TianoCore Contribution Agreement 1.1
Reported-by: Christian Ehrhardt <ehrhardt@genua.de>
Signed-off-by: Christian Ehrhardt <ehrhardt@genua.de>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Christian Ehrhardt <ehrhardt@genua.de>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Tested-by: Christian Ehrhardt <ehrhardt@genua.de>
* In DxeIpIo, there are several places use ASSERT() to check input
parameters without and descriptions or error handling. This patch
fixed this issue.
* Fixed some incorrect descriptions in code commence.
* Remove unneeded Exit tag in function IpIoOpen and IpIoConfigIp.
* Add EFIAPI tag for function IpIoRefreshNeighbor.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
* When the packet is not normal packet or icmp error packet, the code
does not recycle it by signal RecycleSignal event, and this will
result some memory leak. This patch is to fix this issue.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
It didn't cause big issues when VT-d was disabled.
But in VT-d enabled platform, lack of EhcFreeUrb call caused
the DMA data was not moved back to user's buffer.
It caused the correct data cannot be got through sync interrupt
transfer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The implementation of MdeModulePkg\Universal\Acpi\AcpiTableDxe reserves
first entry of RSDT/XSDT to FADT, the first entry value is 0 when FADT
is not installed. So the RSDT/XSDT parsing code should check the entry
value first before checking the table signature.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Commit 2ac1730bf2 (MdeModulePkg/DxeIpl: Mark page table as read-only)
sets the memory pages used for page table as read-only after paging is
setup and sets CR0.WP to protect CPU modifying the read-only pages.
The commit causes #PF when MemEncryptSevClearPageEncMask() or
MemEncryptSevSetPageEncMask() tries to change the page-table attributes.
This patch takes the similar approach as Commit 147fd35c3e
(UefiCpuPkg/CpuDxe: Enable protection for newly added page table).
When page table protection is enabled, we disable it temporarily before
changing the page table attributes.
This patch makes use of the same approach as Commit 2ac1730bf2
(MdeModulePkg/DxeIpl: Mark page table as read-only)) for allocating
page table memory from reserved memory pool, which helps to reduce a
potential "split" operation.
The patch duplicates code from commit 147fd35c3e. The code duplication
will be removed after we implement page table manipulation library. See
bugzilla https://bugzilla.tianocore.org/show_bug.cgi?id=847.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
We're currently building everything except for this file.
Since 'fdt_create_empty_tree' can be useful for some
platforms, compile this one too.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This currently isn't needed by anything in the edk2 tree but
it's useful for externally maintained platforms which have
to set this register e.g. to disable alignment aborts.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Today's implementation prints nothing when the format string cannot
fit in the report status extended data buffer.
It confuses user.
The patch changes to print partial message by truncating the format
string when it's too long.
The missing enhancement is the extended data buffer only reserves 96
bytes for the var-args. When the format string is not very long but
contains 13 %lx or %p, the var-args buffer is too small. Today's
implementation prints nothing for this case.
This patch doesn't change such behavior.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
According to UEFI spec, the PXE.Mtftp() should return invalid parameter if the
BufferPtr parameter was NULL and the DontUseBuffer parameter was FALSE.
The DontUseBuffer is only used when perform MTFTP/TFTP read operation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
According to TCG PP1.3 spec, error PCR bank allocation input should be
rejected by Physical Presence. Firmware has to ensure that at least one
PCR banks is active.
Cc: Long Qin <qin.long@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Type definition in UEFI & OpeenSSL is different. Sometime it could cause
write overflow. Should use same data type when accessing the same region
Cc: Long Qin <qin.long@intel.com>
Cc: Chen Chen <chen.a.chen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
AllocateCodePages() is used to allocate buffer for IDT range,
the code pages will be set to RO in SetMemMapAttributes(),
then the code to set IDT range to RO in PatchGdtIdtMap() is
redundant and could be removed.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
When StackGuard is enabled on IA32, the #double fault exception
is reported instead of #page fault.
This issue does not exist on X64, or IA32 without StackGuard.
The fix at e4435f710c was incomplete.
It is because AllocateCodePages() is used to allocate buffer for
GDT and TSS, the code pages will be set to RO in SetMemMapAttributes().
But IA32 Stack Guard need use task switch to switch stack that need
write GDT and TSS, so AllocateCodePages() could not be used.
This patch uses AllocatePages() instead of AllocateCodePages() to
allocate buffer for GDT and TSS if StackGuard is enabled on IA32.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
* Since wireless network can switch at very short time, the time interval
of reconfig event checking is too long for this case. To achieve better
performance and scalability, separate this task from Ip4 tick timer.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
* The library API use array elements without any index range check, this
patch is to fix this issue to avoid null pointer reference.
V2
* Added an ASSERT check for the case PrefixLength equals to IP6_PREFIX_MAX.
* Synced some code descriptions to head file.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
In UDP6Dxe, there are several places that may be enhanced
to check input parameters and returned status. This patch
is to fix these issues.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
In UDP6Dxe Udp6Groups(), the code return directly without free the
buffer allocated for McastIp when JoinFlag is TRUE. It is a memory
leak issue that needs to be fixed. This patch is to fix this issue.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
In Udp6Dxe, there are several places use ASSERT to check returned
value. But these errors should be handled if they occur, this patch
is to fix this issue.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
0 40 f0 100
+---WT--+--UC--+--WT--+-----WB----+----UC----+
When calculating the shortest path from 0 to 100, the
MtrrLibCalculateLeastMtrrs() is called to update the
Vertices.Previous.
When calculating the shortest path from 0 to 40,
MtrrLibCalculateLeastMtrrs() is called recursively to update the
Vertices.Previous.
The second call corrupt the Previous value that will be used
later.
The patch removes the code that corrupts Previous.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
80 A8 B0 B8 C0
+----------WB--------+-UC-+-WT-+-WB-+
For above memory settings, current code caused the final MTRR
settings miss [A8, B0, UC] when default memory type is UC.
The root cause is the code only checks the mandatory weight
between A8 to B0, but skips to check the optional weight.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
* When build a DHCP message in function DhcpSendMessage() or DhcpRetransmit(),
a new NET_BUF is created by the library of NetbufFromExt, but it's not freed
after it is sent out. This patch is to fix this memory leak issue.
V2:
* Since packet has already been referred by DhcpSb->LastPacket, and will be
freed when sending another packet or clean up, there is no need to add an
extra free function in NetbufFromExt.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
In some case the ArrayIndex with UINT16 may be not large enough to
hold the multiplication result of HiiQuestion->VarOffset * 8;
So this patch update the data type to fix this potential issue.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When compiling with any ARM toolchain and Os, registers can get
trashed when returning for the second time from SetJump because GCC
only handles this correctly when using standard names like 'setjmp' or
'getcontext'. When different names are used you have to use the
attribute 'returns_twice' to tell gcc to be extra careful.
example:
extern int FN_NAME(void*);
void jmp_buf_set(void *jmpb, void (*f)(void))
{
if (!FN_NAME(jmpb))
f();
}
this code produces this wrong code with Os:
00000000 <jmp_buf_set>:
0: e92d4010 push {r4, lr}
4: e1a04001 mov r4, r1
8: ebfffffe bl 0 <nonstandard_setjmp>
c: e3500000 cmp r0, #0
10: 01a03004 moveq r3, r4
14: 08bd4010 popeq {r4, lr}
18: 012fff13 bxeq r3
1c: e8bd4010 pop {r4, lr}
20: e12fff1e bx lr
The generated code pushes backups of r4 and lr to the stack and then
saves all registers using nonstandard_setjmp.
Then it pops the stack and jumps to the function in r3 which is the
main problem because now the function can overwrite our register
backups on the stack.
When we return a second time from the call to nonstandard_setjmp, the
stack pointer has it's original(pushed) position and when the code
pops r4 and lr from the stack the values are not guaranteed to be the
same.
When using a standard name like setjmp or getcontext or adding
'__attribute__((returns_twice))' to nonstandard_setjmp's declaration
the code looks different:
00000000 <jmp_buf_set>:
0: e92d4007 push {r0, r1, r2, lr}
4: e58d1004 str r1, [sp, #4]
8: ebfffffe bl 0 <setjmp>
c: e3500000 cmp r0, #0
10: 059d3004 ldreq r3, [sp, #4]
14: 01a0e00f moveq lr, pc
18: 012fff13 bxeq r3
1c: e28dd00c add sp, sp, #12
20: e49de004 pop {lr} ; (ldr lr, [sp], #4)
24: e12fff1e bx lr
Here the problem is being solved by restoring r3 from the stack
without popping it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
EBC compiler doesn't treat EFI_xxx as constant due to these macros
are UINT64 type in 64bit env and UINT32 type in 32bit env.
So it reports error when "case EFI_xxx" is used.
The patch changes to use if-else to fix EBC build failure.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The patch only change the comments and variable name so
doesn't impact the functionality.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
*SetMemoryAttribute*() API cannot handle the setting request that
looks like <0, MAX_ADDRESS, Type>. The buggy parameter checking
logic returns Unsupported for this case.
The patch fixes the checking logic to handle such case.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Code forgot to initialize the optional weight between adjacent
vertices. It caused wrong MTRR result was calculated for some
memory settings.
The logic was incorrectly removed when converting from POC
code. The patch adds back the initialization.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
MtrrSetMemoryAttributesInMtrrSettings() missed the debug messages
of memory attribute request and status. The patch moves all debug
messages from MtrrSetMemoryAttributeInMtrrSettings() to
MtrrSetMemoryAttributesInMtrrSettings() and refines the debug message
to carry more information.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
v2:
* Refine the commit log.
There are two place to close the ISCSI ExitBootServiceEvent:
#1.IScsiOnExitBootService(), which is the callback function of
ExitBootServiceEvent.
#2.IScsiCleanDriverData(), which will be invoked by ISCSI driver
binding stop().
So, the ExitBootServiceEvent will be closed and freed when exit boot
server is triggered. But it may be closed and freed again in ISCSI driver
binding stop(), which will result in the issue recorded at
https://bugzilla.tianocore.org/show_bug.cgi?id=742.
This patch is to resolve the issue.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
v2:
* Refine the commit log.
There are two place to close the ISCSI ExitBootServiceEvent:
#1.IScsiOnExitBootService(), which is the callback function of
ExitBootServiceEvent.
#2.IScsiCleanDriverData(), which will be invoked by ISCSI driver
binding stop().
So, the ExitBootServiceEvent will be closed and freed when exit boot
server is triggered. But it may be closed and freed again in ISCSI driver
binding stop(), which will result in the issue recorded at
https://bugzilla.tianocore.org/show_bug.cgi?id=742.
This patch is to resolve the issue.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
This patch is to fix the compiler warning error: C4245. The issue will happen
if the below build option is enabled:
*_*_*_CC_FLAGS = -J.
That's because the value of ('A' - 'a') is a negative value, which will
be converted to an unsigned type if CHAR8 is treated as unsigned:
Src -= ('A' - 'a');
The above issue is also recorded at:
https://bugzilla.tianocore.org/show_bug.cgi?id=815.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
* In function Mtftp4WrqSendBlock(), when packet is not needed, function
returns EFI_ABORTED but not freed the packet buffer. It results some
memory leak and this patch is to fix this issue.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
* This function sets returned status as token status and signal token
when error occurs, and it results token status not compliance with
spec definition. This patch fixed this issue.
* This function restore Tpl twice when Mtftp4WrqStart() returns an
error, this patch fixed this issue.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
The reason is that DXE part initialization will reuse the stack allocated
at PEI phase, if MP was initialized before. Some code added to check this
situation and use stack base address saved in HOB passed from PEI.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
As the name suggests, CpuMpData->CpuInfoInHob[0].ApTopOfStack must be init
to the top of stack. But the MpInitLibInitialize() passed the base address
of stack to InitializeApData(), which is not correct. Although this stack
is not used for BSP, it's should be fixed in case of misunderstanding and
future possible code changes.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The version cc71d8's fix was washed out by structure pcd report patch.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
when it is only single SKUID, we don't need to print the SKUID info for
every PCD since in the Global section there already have this info.
For DefaultStore, we use same rule.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When SourceLevelDebug is enabled, AP randomly executes the DXECORE
timer handler logic. The root cause is the interrupts are not
masked in AP wake up procedure.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
PCI_ECAM_ADDRESS() macro is defined in PciExpress21.h so
always include PciExpress21.h in the library header file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
* Added some ASSERT descriptions for library APIs.
* Added "Optional" option for Context parameter in UdpIoCancelDgrams().
* Added function return status check for UdpIoFreeIo().
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
UefiShellLevel2CommandsLib (somewhat questionably) calls the
BaseLib-internal function InternalCharToUpper().
This function is declared in "MdePkg/Library/BaseLib/BaseLibInternals.h",
which is not a public library class header. UefiShellLevel2CommandsLib
therefore duplicates the function declaration, but a mistake was made: the
EFIAPI calling convention is not spelled out on the duplicated
declaration. Therefore calls made from UefiShellLevel2CommandsLib will not
match the actual function definition in "MdePkg/Library/BaseLib/String.c",
when GCC/X64 toolchains are used.
One consequence of this is that cross-filesystem copies don't work in the
UEFI shell (see the StrniCmp() function in
"UefiShellLevel2CommandsLib.c"). From the original report:
> FS0:\efi\ubuntu\> cp grubx64.efi fs1:\
>
> cp: The source and destination are the same.
Copy the declaration from "BaseLibInternals.h" to
"UefiShellLevel2CommandsLib.c" verbatim.
Reported-by: Rebecca Cran <rebecca@bluestop.org>
Analyzed-by: Thomas Palmer <thomas.palmer@hpe.com>
Analyzed-by: Liming Gao <liming.gao@intel.com>
Ref: http://mid.mail-archive.com/47cd17d8-f022-6ca5-2f52-06a8250f8d14@cran.org.uk
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Rebecca Cran <rebecca@bluestop.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Thomas Palmer <thomas.palmer@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The final Pcd value should only be override by its parents.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Feng Bob C <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Pcd default value in DEC should only be assigned once.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
DynamicHiiPcd may be used by PEIM or DXE driver.
All used DynamicHiiPcd value should be collected and placed into
the default setting PCD PcdNvStoreDefaultValueBuffer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Support early SetAttributes() before DMAR table is installed.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signal AcpiNotificationFunc() initially for the case that
DMAR table has been installed when creating event.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
* In old implementation, the operation len-- assumes AsciiSPrint()
has counted NULL terminator, and it's not correct. This patch is
to fix this issue.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
* Library API should check the input parameters before use, or
ASSERT to tell it has to meet some requirements. But in DxeNetLib,
not all functions follows this rule.
* ASSERT shouldn't be used as error handling, add some handling code
for errors.
* Add some ASSERT commence in function notes.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
The NIC_ITEM_CONFIG_SIZE macro in DxeNetLib is defined as:
sizeof (NIC_IP4_CONFIG_INFO) + sizeof (EFI_IP4_ROUTE_TABLE) *
MAX_IP4_CONFIG_IN_VARIABLE. This macro should be surrounded
with parenthesis to avoid being incorrectly used.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
This patch is to fix the issue that dereferencing of "This" (EFI_LOAD_FILE_PROTOCOL)
in EfiPxeLoadFile() is happening before the NULL check.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
The PxeBcDhcp4CallBack() is provided for DHCP driver to invoke packet check
during DHCP process, the DHCP driver should make sure Packet and NewPacket
has meaningful value. This patch adds assert for this.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
PXE need to use extended DHCP options and check received offers in callback
function, so there is no need to continue the PXE process if DHCP driver has
been started by other instance but not PXE driver itself.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
VS2010 also defined RSIZE_MAX, so we undef it first.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Currently "BaseTools/Source/C/DevicePath/DevicePath.c" fails to build with
GCC48:
> DevicePath.c: In function 'print_mem':
> DevicePath.c:109:5: error: 'for' loop initial declarations are only
> allowed in C99 mode
> for (size_t i=0; i<n; i++) {
> ^
> DevicePath.c:109:5: note: use option -std=c99 or -std=gnu99 to compile
> your code
In addition, the print_mem() function does not conform to the edk2 coding
style:
- we use CamelCase and no underscores in identifiers,
- the types and type qualifiers should follow the edk2 style,
- initialization as part of definition is forbidden for local variables.
Clean these up.
While updating the print_mem()/PrintMem() call sites, also remove the
superfluous parentheses around the second argument.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Fixes: 7dbc50bd24
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
UINT64 is defined as the different type for the different ARCHs. To
let it work for all archs and compilers, add (unsigned long long) for
the input value together with %llx.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
The Dhcp4.TransmitReceive() API should be able to use at any time according
to UEFI spec. While in classless addressing network, the netmask must be
explicitly provided together with the station address.
But if the DHCP instance haven't be configured with a valid netmask, we need
compute it according to the classful addressing rule. In such case, if the
user configures with class E IP address, ASSERT will happen, we need to handle
this case and return error status code.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
in version a74398 we use guid value and Fv name as ffs dir for FILE
statement, this patch apply this rule on subFv image.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
clang generates many warnings
warning: field 'XXX' is uninitialized when used here [-Wuninitialized]
for VfrFormPkg.h.
VfrFormPkg.h defines many classes derived from CIfrObj (along with other
base classes.)
Each of these derived classes defines a non-static member field that serves
as a duplicate pointer to an original pointer defined in the CIfrObj base
class, but cast to a different pointer type.
The derived class constructor passes the duplicate pointer to base class
constructors:
1) Once passes the address of the duplicate pointer to the CIfrObj
constructor to have it initialized.
2) Then passes the duplicate pointer to one or more subsequent base class
constructors to be used.
Both 1) and 2) constitute undefined behavior in C++. C++ prescribes that
base classes are initialized before non-static members when initializing a
derived class. So when base class constructors are executing, it is not
permitted to assume any non-static members of the derived class exist (even
to the stage of having their storage allocated.)
clang does not issue warnings for 1), but issues warnings -Wuninitialized
for 2).
This coding methodology is resolved as follows:
a) The CIfrObj object accessor method for retrieving the original pointer
is revised to a template member function that returns the original
pointer cast to a desired target type.
b) The call to CIfrObj constructor is no longer used to initialize the
duplicate pointer in the derived class.
c) Any subsequent calls to a base class constructor that need to use the
pointer, retrieve it from the CIfrObj base class using the template
accessor method.
d) If the derived class makes no further use of the pointer, then the
duplicate pointer defined in it is eliminated.
e) If the derived class needs the duplicate pointer for other use, the
duplicate pointer remains in the derived class and is initialized in
proper order from the original pointer in CIfrObj.
f) Existing source code that previously used the CIfrObj pointer accessor
method is revised to use the template method.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zenith432 <zenith432@users.sourceforge.net>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Some code generated by antlr causes clang to emit warning
warning: equality comparison with extraneous parentheses
[-Wparentheses-equality]
The warning is suppressed specifically for clang without affecting other
compilers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zenith432 <zenith432@users.sourceforge.net>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The member function CVfrDLGLexer::errstd is intended as an override virtual
function of DLGLexerBase::errstd, but due to mismatched prototype, it
didn't override, and never got called.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zenith432 <zenith432@users.sourceforge.net>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This is caused by a previous patch which tried to fix string over-read.
It's found that that patch for PrintLib in MdePkg will cause premature
terminating of loop used to traversing format string and cause incomplete
string output. Because this library uses similar code to do the same
job, it has the same issue too. So the fix is also the same.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This is caused by previous patch which tried to fix string over-read,
which breaks UEFI menu rendering: the following
/------------------------------------------------------------------------------\
| Device Manager |
\------------------------------------------------------------------------------/
is rendered as
/\
| Device Manager |
\/.0 2.00 GHz
(the spurious digits are SMBIOS data from the home screen)
The problem appears to be that the CHAR16 value of BOXDRAW_HORIZONTAL
equals 0x2500, which means that testing ArgumentString[] != '\0'
(which tests the low byte only) will yield FALSE and terminate the
loop prematurely.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
According to UEFI/PI spec, the AllocateXXXPool() interfaces should
return eight-byte aligned buffer that satisfies the required
HEADER_ALIGNMENT which is 4.
This patch adds ASSERT to make sure the bin at required alignment,
that can help catch the issue earlier about incorrect aligned buffer
returned from AllocateXXXPool().
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
According to UEFI/PI spec, the AllocateXXXPool() interfaces should
return eight-byte aligned buffer that satisfies the required
HEADER_ALIGNMENT which is 4.
This patch adds ASSERT to make sure the bin at required alignment,
that can help catch the issue earlier about incorrect aligned buffer
returned from AllocateXXXPool().
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Enhance DumpModuleImageInfo() for page fault with I/D set.
If it is page fault with I/D set, the (E/R)IP in SystemContext
could not be used for DumpModuleImageInfo(), instead of, the next
IP of the IP triggering this page fault could be found from stack
by (E/R)SP in SystemContext.
IA32 SDM:
— I/D flag (bit 4).
This flag is 1 if the access causing the page-fault exception was
an instruction fetch. This flag describes the access causing the
page-fault exception, not the access rights specified by paging.
The idea comes from SmiPFHandler () in
UefiCpuPkg/PiSmmCpuDxeSmm/Ia32/PageTbl.c and
UefiCpuPkg/PiSmmCpuDxeSmm/X64/PageTbl.c.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
CpuDeadLoop();// may return if executing under a debugger
// Clear the error registers that we have already displayed incase some one wants to keep going
// Clear the error registers that we have already displayed incase some one wants to keep going
SystemContext.SystemContextArm->DFSR=0;
SystemContext.SystemContextArm->DFSR=0;
SystemContext.SystemContextArm->IFSR=0;
SystemContext.SystemContextArm->IFSR=0;
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
