The lemp10 unit that QA has uses the O2 Micro card reader, so just
enable the driver on everything. Fixes lemp10 not going deeper than C2
when idle.
Change-Id: I564f3f483b3e47de746b5541540c9c132d42af26
Signed-off-by: Tim Crawford <tcrawford@system76.com>
The 3060 variant of the galp5 uses the OZ711LV2. Enable the driver to
fix LTR programming, as was done for other models in commit 3d7a5bdf58
("mb/system76: Enable DRIVERS_GENERIC_BAYHUB_LV2 to fix LTR issue").
Tested on system76/galp5 with a 3060: CPU reaches C-states deeper than
C2 when idle.
Ref: 58be66945f ("mb/system76/adl,rpl,tgl-h: Enable DRIVERS_GENERIC_BAYHUB_LV2 to fix LTR issue")
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Change-Id: Ibe53db7a0744eb5bc69d563652faba8e50bd86ba
For some reason, the APM SCI to install the SMMSTORE comm buffer
regularly, but not always, fails with 0x4ed on ADL. In this case, a
second attempt seems to always complete successfully.
Tested on system76/darp8 and system76/galp6.
Change-Id: I843116113b8c24f1aee42f9d9042cdc0471a1b43
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Report CPU C10 state over eSPI so that the EC can use Virtual Wires to
detect if PECI can be used.
Change-Id: If3410cc15b0e41ca98e3cfce324e9bcb315116d9
When lemp9 was converted to a variant in CB:64528, the Makefile was not
updated to handle the variant-specific `romstage.c`. This, as would be
expected, caused memory init errors and broke boot on CML-U boards.
Tested lemp9 boots to payload again.
Fixes: 5b7b04c938 ("mb/system76/cml-u: Convert lemp9 to a variant")
Change-Id: I2c9d26ebe4e36f75a97d40fcccb49f9564555beb
Signed-off-by: Tim Crawford <tcrawford@system76.com>
According to the schematics, the components/pins for RTD3 support are
not connected. The enable GPIO for components is tied directly to power
and the reset GPIO is tied to `BUF_PLT_RST#`.
Change-Id: I6b7ab26e067135954c60bd2e2de3715c95ad5d4d
Signed-off-by: Tim Crawford <tcrawford@system76.com>
After switching to S3, the use of RTD3 on the SATA port breaks drives
exiting D3cold.
Change-Id: I86b1c1e5081df9c462b22a724cf155d2a5507522
Signed-off-by: Tim Crawford <tcrawford@system76.com>
`chipset.cb` is not used when PCH-S is selected, as is the case for
RPL-HX. Fix setting power limits by putting the definitions in the
correct file.
Change-Id: Ia823ab82afdc76c3eb6f15cd2617b0780c84e8c4
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Multiple users have requested to have the sysfs value `product_uuid` be
filled, and at least one wants DMI to report the serial number. Add the
drivers so that we can fill them in when flashing firmware.
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Change-Id: Ic0a8dd36839df2c3f9afe54251c7d3487648f42a
Per TPM spec and edk2 reference, perform a TPM restart in the case that
a TPM resume fails.
Change-Id: I444ab3cb12acbff740b5b8d2a9f7bed06392e9ec
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Prevents the Infineon chip from failing to stop/resume on S3.
Change-Id: Ie1f4d3859ea7204b7510ea9756a697b12e4e01da
Signed-off-by: Tim Crawford <tcrawford@system76.com>
The EC now detects if the keyboard is white or RGB backlit via
`RGBKB-DET#`. Remove the Kconfig for the selection and update the ACPI
methods for the new functionality.
Change-Id: I263ede51a4184769659082a2c60d9556b5328670
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Resetting the device will cause the keyboard backlight and airplane LED
to lose their state.
Change-Id: Ib0fc9e95b5eb430b0eb4fbe46980fe6b663f7b20
Signed-off-by: Tim Crawford <tcrawford@system76.com>
System76 EC sets PL4 values through PECI based on AC state [1]. Remove
the static PL4 values from coreboot since they won't be used. This will
result in sysfs reporting the package default for PL4.
[1]: https://github.com/system76/ec/pull/353
Change-Id: If33eb38a20febaf8c71615f0d1a640d3991f42ff
Signed-off-by: Tim Crawford <tcrawford@system76.com>
DDR5 uses a Serial Presence Detect EEPROM with hub function
(SPD5 hub device) to store the spd data.
This CL adds support to read the spd5 hub device via smbus.
BUG=b:180458099
TEST=Boot adlrvp DDR5 board to kernel
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: Ic5e6c58f255bef86b68ce90a4f853bf4e7c7ccfe
Prevents current overdraw leading to power off.
Change-Id: I5661594f40719b3248964e2fc0ab1c85362bfaff
Signed-off-by: Tim Crawford <tcrawford@system76.com>
