BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2363
This patch is to fix a build tool regression issue which was introduced
by commit b8ac0b7f28.This issue caused map file lost the line of IMAGE=***.
For example,in Ovmf.map, there is no line of (IMAGE=<path to efi> ) under
each of modules item.
The path to the efi file generated by each module is written on this line
The purpose of this line is add the debug image full path.
there is no information about the module in the map file other than FVName,
it allows us to quickly know which module this part corresponds to.
In commit b8ac0b7f28,add a line ("self.BuildModules = []") in function,
but it's used to calculate the variable ModuleList in the following code.
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2270
Currently a PCD (e.g. FeaturePCD) cannot be used in a conditional
statement in a DSC/FDF file without a module in the build referencing
the PCD package DEC file.
An example implementation that to support this is to allow a [Packages]
section in the DSC file to list additional package dependencies for PCD
references in the package DSC/FDF files.
this patch is going to add the ability to have the [packages] section
defined in the DSC file
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Acked-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2118
When a packet is queued/completed for the asynchronous IO queue, the logic
to roll over to the front of the queue doesn't account for actual size of
the IO Submission/Completion queue.
This causes a device to hang due to doorbell being outside of visible
queue. An example would be if an NVMe drive only supported a queue size of
128 while the driver supports 256.
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Acked-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2333
During a SetVariable () invocation, UpdateVariable () is called.
UpdateVariable () contains logic to determine whether a volatile or
non-volatile UEFI variable was set so the corresponding runtime
cache can be updated to reflect the change. The current logic simply
evaluates Variable->Volatile to determine which runtime cache should
be updated.
The problem is Variable->Volatile does not always reflect whether a
volatile variable is being set. Variable->Volatile is set to TRUE
only in the case a pre-existing variable is found in the volatile
variable store. Therefore, the value is FALSE when a new volatile
variable is written.
This change updates the logic to take this into account. If a new
variable is written successfully, the Attributes will accurately
reflect whether the variable is non-volatile. If a pre-existing
variable is modified, the Volatile field will reflect the type of
variable (Attributes are not reliable; e.g. 0x0 indicates deletion).
* Observable symptom: A volatile variable that was set successfully
might return EFI_NOT_FOUND when the variable should be found.
* The issue is a regression introduced to the variable services only
when the variable runtime cache is enabled by the following PCD
being set to TRUE:
gEfiMdeModulePkgTokenSpaceGuid.PcdEnableVariableRuntimeCache
* The issue was implemented in commit aab3b9b9a1 but the PCD was not
set to TRUE by default enabling the issue until commit e07b7d024a.
Fixes: aab3b9b9a1
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1871
This is null version of RngLib which should be used with modules that
inherit an (indirect) dependency on the RngLib class, but never actually
call RngLib APIs for consuming randomness.
To be more specific, if following components or functionalities are used
in a platform, the BaseRngLibNull should *not* be used. Instead, a non-Null
version of RngLib must be used (like BaseRngLib for IA32/X64, or future
DxeRngLibRngProtocol for all ARCHs).
- HddPasswordDxe.inf
- AES, TLS (TlsDxe.inf, TlsLib.inf), RSA_OAEP, RSA_PK1
- (If BaseRngLibNull interface ASSERTed at boot time)
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2329
XD (ExecutionDisable) feature, when turned on, allows page table
entry BIT63 set to 1 indicating the memory pointed by the page table
is disallowed to execute.
DxeIpl::CreateIdentityMappingPageTables() enables the XD when CPU
supports it.
Later DxeCore modifies the page table to set the BIT63 to protect
the stack/heap to disallow code execution in stack/heap.
UefiCpuPkg/CpuCommonFeaturesLib enables/disables the XD feature
according to PcdCpuFeaturesSetting.
When XD is disabled, GP fault is generated immediately because some
page entries have BIT63 set.
To fix this issue, this patch removes the XD feature logic from
UefiCpuPkg/CpuCommonFeaturesLib so the XD feature is only taken
care of by DxeIpl.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2315
Add directory for the Mergify YML configuration files that
provides rules and actions used to process a pull request.
* Auto commit a PR from EDK II Maintainer with 'push' label
set and all CI checks pass
* Auto close a PR from any developers without 'push' label
set and all CI checks pass.
* Auto close a PR from a non EDK II Maintainer that has
the 'push' label set.
* Post a comment to a PR that has a merge conflict.
Submitter can resolved conflicts and reopen the PR.
* Post a comment to a PR that fails PatchCheck.py
Submitter can resolve PatchCheck.py issues and
reopen the PR.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2315
Add YAML file to the package directory with the
configuration of the checks to perform during a
CI build.
Use BaseCryptLibNull and TlsLibNull for package CI
builds to reduce package build times. Enabled with
CONTINUOUS_INTEGRATION in YAML files. By default
CONTINUOUS_INTEGRATION is not defined, and the
original lib mappings are preserved.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2315
Add YAML file to the package directory with the
configuration of the checks to perform during a
CI build.
Use BaseCryptLibNull for package CI builds to reduce package
build times. Enabled with CONTINUOUS_INTEGRATION in YAML
files. By default CONTINUOUS_INTEGRATION is not defined,
and the original lib mappings are preserved.
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2315
Add use of RC_PATH define that provides the path to the resource
compiler that is typically provided in a Windows SDK. The path
changes with different Windows SDK releases. This define is set
to the WINSDK_PATH_FOR_RC_EXE environment variable. This
environment variable must be set to the path to the currently
installed resource compiler (rc.exe).
Update set_vsprefix_envs.bat to set WINSDK_PATH_FOR_RC_EXE
if a Windows SDK is detected.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Remove references to the number of submodules in the tree, as well as
reword the referring to specific submodules as "former" and "previous".
This means we won't need to keep updating the surrounding text if we
add/remove submodules.
Cc: Andrew Fish <afish@apple.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2303
Whenever a PCI device is discovered, PCI bus calls the
EDKII_DEVICE_SECURITY_PROTOCOL to authenticate it.
If the function returns success, the PCI bus allocates
the resource and installs the PCI_IO for the device.
If the function returns fail, the PCI bus skips the device.
It is similar to EFI_SECURITY_ARCH_PROTOCOL, which
is used to verify an EFI image.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Yun Lou <yun.lou@intel.com>
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
When a boot loader examines the memory map, it can see that location 0
is available memory. If it chooses to use that memory, and
PcdNullPointerDetectionPropertyMask is enabled, use of memory in page 0
will cause an exception. This does occur when running the memtest86
program.
Leaving page 0 available is for legacy support purpose. Since we have
deprecated the support of legacy, the solution is just reserving it so
that it cannot be allocated for other uses.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1885
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
In order to permit the use of compilers that only implement the small
code model [which involves the use of ADRP instructions that require
4 KB segment alignment] for generating PE/COFF binaries with a small
footprint, we patch ADRP instructions into ADR instructions while doing
the ELF to PE/COFF conversion.
As it turns out, the linker may be doing the same, but for different
reasons: there is a silicon erratum #843419 for ARM Cortex-A53 which
affects ADRP instructions appearing at a certain offset in memory, and
one of the mitigations for this erratum is to patch them into ADR
instructions at link time if the symbol reference is within -/+ 1 MB.
However, the LD linker fails to update the static relocation tables, and
so we end up with an ADR instruction in the fully linked binary, but
with a relocation entry in the RELA section identifying it as an ADRP
instruction.
Since the linker has already updated the symbol reference, there is no
handling needed in GenFw for such instructions, and we can simply treat
it as an ordinary ADR. However, since it is guaranteed to be accompanied
by an add or load instruction with a LO12 relocation referencing the same
symbol, the section offset check we apply to ADR instructions is going to
take place anyway, so we can just disregard the ADR instruction entirely.
Reported-by: Eugene Cohen <eugene@hp.com>
Suggested-by: Eugene Cohen <eugene@hp.com>
Tested-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add a PCD to govern whether to use DT or ACPI in case the
variable governing this is not found or is not valid.
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
We have discussed in this thread.
https://edk2.groups.io/g/devel/topic/32205028
Before the change, TPM FW upgrade will impact TPM2 ACPI PCR value because
TPM2 ACPI HID include FW version.
This change make the measurement before TPM2 HID fixup. So, after TPM FW
upgrade, the ACPI PCR record remains the same.
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2327
RAID drivers abstract their physical drives that make up
the array into a single unit, and do not supply individual
EFI_BLOCK_IO_PROTOCOL instances for each physical drive in the array.
This breaks support for the Security Storage Command Protocol,
which currently requires an EFI_BLOCK_IO_PROTOCOL to be associated
with the same device the protocol is installed on and provide
all the same parameters.
This patch remove dependency on EFI_BLOCK_IO_PROTOCOL and
allows access to Opal drive members of a RAID array.
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Sets gEfiMdeModulePkgTokenSpaceGuid.PcdEnableVariableRuntimeCache
to FALSE in OvmfPkgIa32.dsc, OvmfPkgIa32X64.dsc, and OvmfPkgX64.dsc
so that when SMM_REQUIRE is TRUE, the SMM variable driver will not
use the runtime variable cache.
This is done for OvmfPkg because it currently depends upon a SMM
variable GetVariable ()implementation as a simple method to exercise
the SMM driver stack. This allows the following commands to be used
for variables such as Boot####, BootOrder, and BootNext to test SMM
timing and stability differences on the BSP (e.g. CPU#0) vs an
AP (e.g. CPU#1).
# taskset -c 0 efibootmgr
# taskset -c 1 efibootmgr
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2220
This change reduces SMIs for GetVariable () by maintaining a
UEFI variable cache in Runtime DXE in addition to the pre-
existing cache in SMRAM. When the Runtime Service GetVariable()
is invoked, a Runtime DXE cache is used instead of triggering an
SMI to VariableSmm. This can improve overall system performance
by servicing variable read requests without rendezvousing all
cores into SMM.
The runtime cache can be disabled with by setting the FeaturePCD
gEfiMdeModulePkgTokenSpaceGuid.PcdEnableVariableRuntimeCache
to FALSE. If the PCD is set to FALSE, the runtime cache will not be
used and an SMI will be triggered for Runtime Service
GetVariable () and GetNextVariableName () invocations.
The following are important points regarding the behavior of the
variable drivers when the variable runtime cache is enabled.
1. All of the non-volatile storage contents are loaded into the
cache upon driver load. This one time load operation from storage
is preferred as opposed to building the cache on demand. An on-
demand cache would require a fallback SMI to load data into the
cache as variables are requested.
2. SetVariable () requests will continue to always trigger an SMI.
This occurs regardless of whether the variable is volatile or
non-volatile.
3. Both volatile and non-volatile variables are cached in a runtime
buffer. As is the case in the current EDK II variable driver, they
continue to be cached in separate buffers.
4. The cache in Runtime DXE and SMM are intended to be exact copies
of one another. All SMM variable accesses only return data from the
SMM cache. The runtime caches are only updated after the variable I/O
operation is successful in SMM. The runtime caches are only updated
from SMM.
5. Synchronization mechanisms are in place to ensure the runtime cache
content integrity with the SMM cache. These may result in updates to
runtime cache that are the same in content but different in offset and
size from updates to the SMM cache.
When using SMM variables with runtime cache enabled, two caches will now
be present.
1. "Runtime Cache" - Maintained in VariableSmmRuntimeDxe. Used to service
Runtime Services GetVariable () and GetNextVariableName () callers.
2. "SMM Cache" - Maintained in VariableSmm to service SMM GetVariable ()
and GetNextVariableName () callers.
a. This cache is retained so SMM modules do not operate on data outside
SMRAM.
Because a race condition can occur if an SMI occurs during the execution
of runtime code reading from the runtime cache, a runtime cache read lock
is introduced that explicitly moves pending updates from SMM to the runtime
cache if an SMM update occurs while the runtime cache is locked. Note that
it is not expected a Runtime services call will interrupt SMM processing
since all CPU cores rendezvous in SMM.
It is possible to view UEFI variable read and write statistics by setting
the gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics FeaturePcd
to TRUE and using the VariableInfo UEFI application in MdeModulePkg to dump
variable statistics to the console. By doing so, a user can view the number
of GetVariable () hits from the Runtime DXE variable driver (Runtime Cache
hits) and the SMM variable driver (SMM Cache hits). SMM Cache hits for
GetVariable () will occur when SMM modules invoke GetVariable ().
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2220
The current VariableInfo application only checks for variable
statistics from SMM if the variable information entries are
not present in the UEFI System Configuration table as published
by the DXE UEFI variable driver (VariableRuntimeDxe).
This change first checks for variable information entries in the
UEFI System Configuration but always checks for entries in SMM
as well. If the SMM variable driver is not present, an instance of
EFI_SMM_VARIABLE_PROTOCOL will not be found and the search for
SMM variable statistics will be aborted (an SW SMI to get variable
statistics will not be triggered).
In the case variable statistics are provided by both a Runtime DXE
driver (e.g. VariableSmmRuntimeDxe) and a SMM driver (VariableSmm),
this change will clearly identify statistics from each respective
driver.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
This change moves the following functions into a dedicated file
so they may be used in other variable files as needed. These are
commonly needed for basic variable data structure parsing
operations. The functions are grouped together in VariableParsing.c
to support cohesiveness for these operations in the file.
Furthermore, it reduces the overall size of the common Variable.c
file.
* DataSizeOfVariable ()
* FindVariableEx ()
* GetEndPointer ()
* GetNextVariablePtr ()
* GetStartPointer ()
* GetVariableDataOffset ()
* GetVariableDataPtr ()
* GetVariableHeaderSize ()
* GetVariableNamePtr ()
* GetVariableStoreStatus ()
* GetVendorGuidPtr ()
* IsValidVariableHeader ()
* NameSizeOfVariable ()
* SetDataSizeOfVariable ()
* SetNameSizeOfVariable ()
* UpdateVariableInfo ()
* VariableCompareTimeStampInternal ()
* VariableServiceGetNextVariableInternal ()
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Before called by GetBufferForValue(), Value has already been called
function IsTypeInBuffer to make sure the value must be buffer type.
So GetBufferForValue can not return NULL.
This commit adds ASSERT to assume (GetBufferForValue (&Value) is not
NULL.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Upgrade openssl from 1.1.1b to 1.1.1d.
Something needs to be noticed is that, there is a bug existing in the
released 1_1_1d version(894da2fb7ed5d314ee5c2fc9fd2d9b8b74111596),
which causes build failure. So we switch the code base to a usable
version, which is 2 commits later than the stable tag.
Now we use the version c3656cc594daac8167721dde7220f0e59ae146fc.
This log is to fix the build failure.
https://bugzilla.tianocore.org/show_bug.cgi?id=2226
Besides, the absense of "DSO_NONE" in dso_conf.h causes build failure
in OvmfPkg. So update process_files.pl to generate information from
"crypto/include/internal/dso_conf.h.in".
shm.h and utsname.h are added to avoid GCC build failure.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
MpInitLib sets X2ApicEnable in two places.
1. CollectProcessorCount()
This function is called when MpInitLibInitialize() hasn't been
called before.
It sets X2ApicEnable and later in the same function it configures
all CPUs to operate in X2 APIC mode.
2. MpInitLibInitialize()
The X2ApicEnable setting happens when this function is called in
second time. But after that setting, no code consumes that flag.
With the above analysis and with the purpose of simplifying the code,
the X2ApicEnable in #1 is changed to local variable and the #2 can be
changed to remove the setting of X2ApicEnable.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Today's logic sets X2ApicEnable flag in each AP's initialization
path when InitFlag == ApInitConfig.
Since all CPUs update the same global data, a spin-lock is used
to avoid modifications from multiple CPUs happen at the same time.
The spin-lock causes two problems:
1. Potential performance downgrade.
2. Undefined behavior when improper timer lib is used.
For example we saw certain platforms used AcpiTimerLib from
PcAtChipsetPkg and that library depends on retrieving PeiServices
from idtr. But in fact AP's (idtr - 4) doesn't point to
PeiServices.
The patch simplifies the code to let BSP set the X2ApicEnable flag so
the spin-lock acquisition from AP is not needed any more.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
RequestMap is used but not Initialized.
RequestMap is called by UhciMapUserRequest, in which RequestMap(Map)
is called by IoMmuMap, and is finally called by IoMmu->Map.
We can not assume RequestMap is given an initial value at any step.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Map is used but not Initialized.
Map is called by IoMmuMap, in which Mapping(Map) is called by IoMmu->Map.
We can not assume Map is given an initial value at any step.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Foreground and background color are saved in a single byte.
Bits 0..3 are the foreground color and bits 4..6 are the background color.
If the Private->Attribute defined correctly, (Private->Attribute >> 4)
must be less than 8.
This commit uses ASSERT to assume "Attribute >> 4" is less than 8.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
IndexTable->Length is used as index in array IndexTable->Index[].
So IndexTable->Length needs to be checked, which should be less than
the array size.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The ACPI specification, version 6.3, January 2019,
defines the Named Object Encoding for ExternalOp
in section '20.2.5.2 Named Objects Encoding'.
This patch adds the definition for ExternalOp to
the list of Primary Opcode definitions.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2295
The current implementation of the FileHandleGetFileName() function
assumes that the Root directory always has the FileName '\0'.
However, the only requirement the UEFI specification defines is that
a prepended '\\' must be supported to access files and folders
relative to the Root directory.
This patch removes this assumption and supports constructing valid
paths for any value of FileName for the Root Directory.
In practice, this fixes compatibility issues with File System drivers
that report '\\' as the FileName of the Root directory, which
currently is both generating an invalid path ("\\\\") and resulting
in an EFI_NOT_FOUND result from the CurrentHandle->Open() call.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Marvin Haeuser <mhaeuser@outlook.de>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Using the inet_pton() function that we imported in the previous patches,
recognize if "HostName" is an IP address literal, and then parse it into
binary representation. Passing the latter to OpenSSL for server
certificate validation is important, per RFC-2818
<https://tools.ietf.org/html/rfc2818#section-3.1>:
> In some cases, the URI is specified as an IP address rather than a
> hostname. In this case, the iPAddress subjectAltName must be present in
> the certificate and must exactly match the IP in the URI.
Note: we cannot use X509_VERIFY_PARAM_set1_ip_asc() because in the OpenSSL
version that is currently consumed by edk2, said function depends on
sscanf() for parsing IPv4 literals. In
"CryptoPkg/Library/BaseCryptLib/SysCall/CrtWrapper.c", we only provide an
empty -- always failing -- stub for sscanf(), however.
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Sivaraman Nainar <sivaramann@amiindia.co.in>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=960
CVE: CVE-2019-14553
Suggested-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
For TianoCore BZ#1734, StdLib has been moved from the edk2 project to the
edk2-libc project, in commit 964f432b9b ("edk2: Remove AppPkg, StdLib,
StdLibPrivateInternalFiles", 2019-04-29).
We'd like to use the inet_pton() function in CryptoPkg. Resurrect the
"inet_pton.c" file from just before the StdLib removal, as follows:
$ git show \
964f432b9b0a^:StdLib/BsdSocketLib/inet_pton.c \
> CryptoPkg/Library/BaseCryptLib/SysCall/inet_pton.c
The inet_pton() function is only intended for the DXE phase at this time,
therefore only the "BaseCryptLib" instance INF file receives the new file.
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Sivaraman Nainar <sivaramann@amiindia.co.in>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=960
CVE: CVE-2019-14553
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
In a later patch in this series, we're going to resurrect "inet_pton.c"
(originally from the StdLib package). That source file has a number of
standard C and BSD socket dependencies. Provide those dependencies here:
- The header files below will simply #include <CrtLibSupport.h>:
- arpa/inet.h
- arpa/nameser.h
- netinet/in.h
- sys/param.h
- sys/socket.h
- EAFNOSUPPORT comes from "StdLib/Include/errno.h", at commit
e2d3a25f1a31; which is the commit immediately preceding the removal of
StdLib from edk2 (964f432b9b).
Note that the other error macro, which we alread #define, namely EINVAL,
has a value (22) that also matches "StdLib/Include/errno.h".
- The AF_INET and AF_INET6 address family macros come from
"StdLib/Include/sys/socket.h".
- The NS_INT16SZ, NS_INADDRSZ and NS_IN6ADDRSZ macros come from
"StdLib/Include/arpa/nameser.h".
- The "u_int" and "u_char" types come from "StdLib/Include/sys/types.h".
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Sivaraman Nainar <sivaramann@amiindia.co.in>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=960
CVE: CVE-2019-14553
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
According to the ISO C standard, strchr() is a function. We #define it as
a macro. Unfortunately, our macro evaluates the first argument ("str")
twice. If the expression passed for "str" has side effects, the behavior
may be undefined.
In a later patch in this series, we're going to resurrect "inet_pton.c"
(originally from the StdLib package), which calls strchr() just like that:
strchr((xdigits = xdigits_l), ch)
strchr((xdigits = xdigits_u), ch)
To enable this kind of function call, turn strchr() into a function.
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Sivaraman Nainar <sivaramann@amiindia.co.in>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=960
CVE: CVE-2019-14553
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
For now, PlatformRecovery doesn't work if OsIndications variable
doesn't exist, which is wrong.
According to the UEFI specification section 3.4.1 and 3.4.2, if
processing of BootOrder does not result in success, the OsRecovery
and PlatformRecovery options should still be processed regardless of
the existence of the OsIndications variable.
Therefore, update the code to check PcdPlatformRecoverySupport instead
of the value of OsIndications variable (PlatformRecovery) to fix
this issue.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Walon Li <walon.li@hpe.com>
Signed-off-by: Sunny Wang <sunnywang@hpe.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Acked-by: Jian J Wang <jian.j.wang@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2312
This patch is for fixing unexpected system hang during S3 unlock process.
FatPei driver maintained and updated internal BlockIo devices list
when there is new BlockIo PPI has installed, and it relied on BlockIo PPI
service to get data from devices. Because BlockIo Ppi leverage
NvmExpressPei Ppi to transit Nvm command to device, we should make sure
NvmePassThruPpi installed before BlockIo PPI.
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
This patch fixes a problem introduced by commit
61bb6eeb4d.
The PcdSnpCreateExitBootServicesEvent is not guaranteed to be FixedAtBuild,
so use PcdGetBool() to supports both fixed and patchable PCD.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2310
When target FV 99% used and only few bytes space left,
SplitFspBin.py may crash with below error:
File "SplitFspBin.py", line 457, in ParseFv
ffshdr = EFI_FFS_FILE_HEADER.from_buffer (self.FvData, offset)
ValueError: Buffer size too small
(40960 instead of at least 40968 bytes)
It was because the offset used by FFS_HEADER parser out of bounds.
It should stop parsing when offset equal or larger than
(buffer size - FFS_HEADER size).
This patch also fixed another crash issue when running script with
Python 3.x and no input parameter given:
File "SplitFspBin.py", line 868, in main
if args.which in ['rebase', 'split', 'genhdr', 'info']:
AttributeError: 'Namespace' object has no attribute 'which'
Test:
1. Ran script with both py2 and py3 with no input and no crash observed.
2. Compare the script result before and after the patch are identical.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1603
1. Add WIN_HOST_BUILD macro check for CLANG9 tool chain
build -p EmulatorPkg\EmulatorPkg.dsc -a IA32 -DWIN_HOST_BUILD=TRUE -t CLANG9
build -p EmulatorPkg\EmulatorPkg.dsc -a X64 -DWIN_HOST_BUILD=TRUE -t CLANG9
2. Append CLANG CC and LINK flags to generate windows HOST.
3. Fix WinHost issue to call GetProcessAffinityMask() API.
The input parameter should be UINTN pointer instead of UINT32 pointer.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1603
CLANG9 generated PE image exposes below two issues.
1. SectionSize is used to copy PE section data. It should be smaller than
section raw size.
2. The real data is required to be copied. So, copy the min size of
VirtualSize and SizeOfRawData.
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2255
Update UefiCpuPkg.dsc to guarantee all libraries and
modules are always built. Add the following components.
* UefiCpuPkg/ResetVector/Vtf0/Bin/ResetVector.inf
* UefiCpuPkg/Library/CpuCommonFeaturesLib/CpuCommonFeaturesLib.inf
ResetVector.inf is a binary INF, so no source builds are
triggered from adding this line. However, a build with
this component does verify the contents of the INF file.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Currently some tests check the value of SOURCE_DEBUG_ENABLE, and some
tests check if it's defined or not. Additionally, in UefiPayloadPkg as
well as some other trees, we define it as FALSE in the .dsc file.
This patch changes all of the Ovmf platforms to explicitly define it as
FALSE by default, and changes all of the checks to test if the value is
TRUE.
Signed-off-by: Peter Jones <pjones@redhat.com>
Message-Id: <20190920184507.909884-1-pjones@redhat.com>
[lersek@redhat.com: drop Contributed-under line, per TianoCore BZ#1373]
[lersek@redhat.com: replace "!= TRUE" with more idiomatic "== FALSE"]
Cc: Andrew Fish <afish@apple.com>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Peter Jones <pjones@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The SRAT generator uses the configuration manager protocol
to obtain the affinity information for the GICC, GIC ITS,
Memory, Generic Initiator, etc. and generates the SRAT table.
The table generator supports ACPI 6.3, SRAT table revision 3.
The ACPI and PCI device handles of the Generic Initiator
Affinity structures are represented using tokens. The
generator invokes the configuration manager protocol
interfaces and requests for objects referenced by tokens
to get the device handle information.
The Configuration Manager object definition for the GICC has
been updated to include the Proximity Domain, Clock Domain
and associated flag information. Similarly the Configuration
Manager object for the GIC ITS has been updated to include
the Proximity Domain information. These changes should not
impact any existing implementations as the new fields have
been added towards the end of the Configuration Manager
Objects.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Patch addresses Bugzilla #1974.
During ExitBootServices stage, drivers should not call any
functions known to use Memory Allocation Services. One of such
functions (as per UEFI spec) is UNDI->Shutdown().
Since UNDI drivers during ExitBootServices phase are expected
to put the adapter to such a state that it will not perform any DMA
operations, there is no need to interface UNDI by SNP driver during
that phase.
Finally, since ExitBootServices event notification function in SNP
only calls UNDI->Shutdown() and Stop() functions, there is no need
to create this event at all. Adding PCD to control creation of event
reacting to ExitBootServices() call so that systems with UNDIs relying
on SNP to call their Shutdown() and Stop() can still work.
Change-Id: Idd76f26d2e8ff7cf88b2d75e2d524c74211f2e89
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Maciej Rabeda <maciej.rabeda@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Add support for allocating aligned pages at an alignment higher
than 4K. The new function allocated memory taking into account
the padding required and then frees up unused pages before mapping
it.
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
While allocating pages aligned at an alignment higher than
4K, allocate memory taking into consideration the padding
required for that alignment. The calls to free pages takes
care of this already.
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
commit a7e2d20193 introduces the code to
get PcdTpm2AcpiTableRev in the driver entry point. This PCD is designed as
DynamicHii or DynamicHiiEx PCD. So, this PCD depends on Variable service.
To make sure PcdTpm2AcpiTableRev value be got, add Variable service as Depex.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: jiewen Yao <jiewen.yao@intel.com>
When c/h file use macro after #include, for example,
In this case, GenMake is not able to create a healthy dependency for the c
file. GenMake used to add $(FORCE_REBUILD) dependency in the c file, this
guarantee the c file is always compiled in incremental build. But, this
function is broken since 05217d210e which
enable /MP for MSVC compiler, in order to compile multiple c files in one
command multi-processing. The fix here is adding '$(FORCE_REBUILD)' back to
retain the original function.
Line number 1728 and 978 are the code pieces which handle this logic.
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
An extra 's' slipped into the 'processing' word.
Drop it to fix the typo.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
An extra 's' slipped into the FvIsBeingProcessed function
name. Drop it to fix the typo.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2266
Similar to what we now do for OVMF, we need to consider the possibility
that PlatformBootManagerWaitCallback () may be called with a
PcdPlatformBootTimeOut that was set to zero, in which case the call should
simply return.
We also change the initial timeout variable name to make the code explicit.
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20191014150311.16740-3-pete@akeo.ie>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2266
Independently of how we decide to address other aspects of the regression
introduced with commit 2de1f611be, it doesn't
make much sense to call for a progress update if PcdPlatformBootTimeOut is
zero.
PcdPlatformBootTimeOut 0, which is the cause of the bug (division by zero)
should be considered to indicate that a platform is not interested in
displaying a progress report, so we alter PlatformBootManagerWaitCallback
to behave that way.
We also change one variable name to make the code more explicit.
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20191014150311.16740-2-pete@akeo.ie>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2266
Commit 2de1f611be introduced a regression
whereas platforms that did set PcdPlatformBootTimeOut to 0 are now getting
an unexpected call to PlatformBootManagerWaitCallback().
This patch also ensures that, if PcdPlatformBootTimeOut is 0xFFFF we don't
call PlatformBootManagerWaitCallback() with a zero argument as doing so
would produce an unwarranted jump to full progress completion which is
likely to throw off users.
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Liming Gao <liming.gao@intel.com>
- If a platform boots such that the boot CPU count is smaller than
PcdCpuMaxLogicalProcessorNumber, then the platform cannot use the "fast
AP detection" logic added in commit 6e1987f19a. (Which has been
documented as a subset of use case (2) in the previous patch.)
Said logic depends on the boot CPU count being equal to
PcdCpuMaxLogicalProcessorNumber. If the equality does not hold, the
platform either has to wait too long, or risk missing APs due to an
early timeout.
- The platform may not be able to use the variant added in commit
0594ec417c either. (Which has been documented as use case (1) in the
previous patch.)
See commit 861218740d. When OVMF runs on QEMU/KVM, APs may check in
with the BSP in arbitrary order, plus the individual AP may take
arbitrarily long to check-in. If "NumApsExecuting" falls to zero
mid-enumeration, APs will be missed.
Allow platforms to specify the exact boot CPU count, independently of
PcdCpuMaxLogicalProcessorNumber. In this mode, the BSP waits for all APs
to check-in regardless of timeout. If at least one AP fails to check-in,
then the AP enumeration hangs forever. That is the desired behavior when
the exact boot CPU count is known in advance. (A hung boot is better than
an AP checking-in after timeout, and executing code from released
storage.)
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1515
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The last parameter of ReserveResourceInGcd() is "ImageHandle", forwarded
in turn to gDS->AllocateMemorySpace() or gDS->AllocateIoSpace() as "owner"
image handle.
But BlDxeEntryPoint() passes "SystemTable" as "ImageHandle".
Compilers have not flagged it because EFI_HANDLE (the type of
"ImageHandle") is unfortunately specified as (VOID*), and
(EFI_SYSTEM_TABLE*) converts to (VOID*) silently.
Hand the entry point function's "ImageHandle" parameter to
ReserveResourceInGcd(). This fixes an actual bug.
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
(This patch is unrelated to the rest of this series; its purpose is to
enable building the UefiPayloadPkg DSC files with GCC.)
When building "UefiPayloadPkg/UefiPayloadPkgIa32.dsc" with GCC48 for the
DEBUG target, the compiler reports that "Entry32" may be used
uninitialized in ParseAcpiInfo(), in the XSDT branch.
Code inspection proves the compiler right. In the XSDT branch, the code
from the RSDT branch must have been duplicated, and "Entry32" references
were replaced with "Entry64" -- except where "MmCfgHdr" is assigned.
Fix this bug by introducing a helper variable called "Signature", so that
we have to refer to "Entry32" or "Entry64" only once per loop body.
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The FvHasBeenProcessed() and FvIsBeingProcesssed() functions make sure
that every firmware volume is processed only once (every driver in every
firmware volume should be discovered only once). For this, the functions
use a linked list.
In MdeModulePkg's DXE Core and SMM Core, the key used for identifying
those firmware volumes that have been processed is the EFI_HANDLE on which
the DXE or SMM firmware volume protocol is installed. In the
StandaloneMmPkg core however, the key is the address of the firmware
volume header; that is, it has type (EFI_FIRMWARE_VOLUME_HEADER*).
(EFI_FIRMWARE_VOLUME_HEADER*) has nothing to do with EFI_HANDLE.
EFI_HANDLE just happens to be specified as (VOID*), and therefore the
conversion between (EFI_FIRMWARE_VOLUME_HEADER*) and EFI_HANDLE is silent.
(The FvHasBeenProcessed() and FvIsBeingProcesssed() functions were likely
copied verbatim from MdeModulePkg's DXE Core and/or the SMM Core, and not
flagged by the compiler in StandaloneMmPkg due to UEFI regrettably
specifying EFI_HANDLE as (VOID*), thereby enabling the above implicit
conversion.)
We should not exploit this circumstance. Represent the key type faithfully
instead.
This is a semantic fix; there is no change in operation.
Cc: Achin Gupta <achin.gupta@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
The EDK 1 Shell (available at <https://github.com/tianocore/edk-Shell>)
has a bug in its EFI_SHELL_ENVIRONMENT2.Execute() implementation that
edk2's UefiShellLib has no choice but to work around.
Improve the explanation in the code. Also, document the implicit
EFI_HANDLE -> (EFI_HANDLE*) conversion, which happens implicitly after
dereferencing ParentHandle, with an explicit cast.
In practice, this patch is a no-op.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
In the FileBufferSave() function, we invoke ShellCloseFile() if "Directory
Can Not Be Saved".
The ShellCloseFile() function takes a (SHELL_FILE_HANDLE*) parameter
called "FileHandle", and correctly passes the de-referenced (*FileHandle)
to EFI_SHELL_CLOSE_FILE, which takes a SHELL_FILE_HANDLE.
However, FileBufferSave() passes SHELL_FILE_HANDLE to ShellCloseFile(),
not the expected (SHELL_FILE_HANDLE*). Correct it.
This fixes an actual bug that has remained hidden for two reasons:
- pointer-to-VOID converts from/to any pointer-to-object type silently,
- the bug is on an error path which has likely never fired in practice.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The TouchFileByHandle() and IsDirectoryEmpty() functions are passed
SHELL_FILE_HANDLE parameters, and they use those parameters correctly.
However, their parameter lists say EFI_HANDLE.
Spell out the right type in the parameter lists.
In practice, this change is a no-op (because, quite regrettably, both
EFI_HANDLE and SHELL_FILE_HANDLE are specified to be typedefs of (VOID*)).
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The UefiShell*CommandsLib instances have constructor functions that do
something like:
gHiiHandle = HiiAddPackages (...);
...
ShellCommandRegisterCommandName (..., gHiiHandle, ...);
and destructor functions that implement the following pattern:
HiiRemovePackages (gHiiHandle);
The -- semantic, not functional -- problem is that "gHiiHandle" is
declared with type EFI_HANDLE, and not EFI_HII_HANDLE, in all of these
library instances, even though HiiAddPackages() correctly returns
EFI_HII_HANDLE, and HiiRemovePackages() takes EFI_HII_HANDLE.
Once we fix the type of "gHiiHandle", it causes sort of a butterfly
effect, because it is passed around widely. Track down and update all of
those locations.
The DynamicCommand lib instances use a similar pattern, so they are
affected too.
NOTE: in practice, this patch is a no-op, as both EFI_HII_HANDLE and
EFI_HANDLE are typedefs to (VOID*). However, we shouldn't use EFI_HANDLE
where semantically EFI_HII_HANDLE is passed around.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The ShellCommandRunConnect() function passes EFI_HANDLE -- (VOID*) --
objects to ConvertAndConnectControllers(), and
ConvertAndConnectControllers() passes those to gBS->OpenProtocol().
Accordingly, ConvertAndConnectControllers() should specify EFI_HANDLE
parameter types, not (EFI_HANDLE*) -- (VOID**) -- types.
This typo is masked because (VOID*) converts to and from any
pointer-to-object type silently.
Note that functionally speaking there is no problem, so this patch does
not change beavior, only cleans up the code.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
EfiCreateProtocolNotifyEvent() takes a (VOID**) for "Registration",
similarly to gBS->RegisterProtocolNotify(). We should pass the address of
an actual pointer-to-VOID, and not the address of an EFI_EVENT. EFI_EVENT
just happens to be specified as (VOID*), and has nothing to do with the
registration.
This change is a no-op in practice; it's a semantic improvement.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jian Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Unlike the InstallMultipleProtocolInterfaces() boot service, which takes
an (EFI_HANDLE*) as first parameter, the
UninstallMultipleProtocolInterfaces() boot service takes an EFI_HANDLE as
first parameter.
These are actual bugs. They must have remained hidden until now because
they are all in Unload() functions, which are probably exercised
infrequently. Fix the UninstallMultipleProtocolInterfaces() calls.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jian Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
In the following call tree:
PlatformInit ()
mInstalledPackages = HiiAddPackages ()
GopInstalled ()
PopulateForm (PackageList = mInstalledPackages)
CreateResolutionOptions (PackageList)
HiiSetString (PackageList
HiiUpdateForm (PackageList)
PlatformDxe passes around an EFI_HII_HANDLE that (a) originates from
HiiAddPackages() and (b) is ultimately passed to HiiSetString() and
HiiUpdateForm(). The intermediate functions PopulateForm() and
CreateResolutionOptions() however take that parameter as an
(EFI_HII_HANDLE*).
There is no bug in practice (because the affected functions never try to
de-reference the "PackageList" parameter, they just pass it on), but the
function prototypes are semantically wrong. Fix that.
This could remain hidden so long because pointer-to-VOID silently converts
to/from any pointer-to-object type, and the UEFI spec mandates that
EFI_HII_HANDLE be a typedef to (VOID*).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The SignalEvent() boot service takes an EFI_EVENT, not an (EFI_EVENT*).
Fix the call in the notification function of
"EFI_SIMPLE_NETWORK_PROTOCOL.WaitForPacket".
This is an actual bug. The reason it's never been triggered is likely that
the "SNP.WaitForPacket" event is rarely waited for by applications -- edk2
itself has zero instances of that, for example.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Unlike the InstallMultipleProtocolInterfaces() boot service, which takes
an (EFI_HANDLE*) as first parameter, the
UninstallMultipleProtocolInterfaces() boot service takes an EFI_HANDLE as
first parameter.
This is an actual bug. It must have remained hidden until now because it's
on an error path. Fix the UninstallMultipleProtocolInterfaces() call.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The SockFreeFoo() callback function for NetbufFromExt() has to match the
NET_VECTOR_EXT_FREE prototype, which takes a (VOID*) as callback argument
(Arg). EFI_EVENT has nothing to do with NET_VECTOR_EXT_FREE. Fix the
SockFreeFoo() parameter list.
This change is a no-op in practice.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Both NetLibDestroyServiceChild() and EFI_SERVICE_BINDING_DESTROY_CHILD
take an EFI_HANDLE for the "ChildHandle" parameter, not an (EFI_HANDLE*).
This patch fixes a real bug.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Both the "ControllerHandle" parameter of CloseProtocol() and the "Handle"
parameter of UninstallMultipleProtocolInterfaces() have type EFI_HANDLE,
not (EFI_HANDLE*).
This patch fixes actual bugs. The issues have been dormant likely because
they are on error paths. (Or, in case of TlsAuthConfigDxe, because the
driver is unloaded likely very infrequently.)
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
NetLibGetSnpHandle() returns an EFI_HANDLE, not an (EFI_HANDLE*).
NetLibGetMacAddress() only uses the return value ("SnpHandle") for a
NULL-check. Fix the type of "SnpHandle".
This patch is a no-op.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
The HandleProtocol() boot service takes an EFI_HANDLE, not an
(EFI_HANDLE*). Remove the bogus cast in the
InternalImageHandleToFvHandle() function.
This is a semantic cleanup; there is no change in behavior.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The BootScriptInsert() and BootScriptLabel() functions take the in/out
parameter "Position" as (EFI_S3_BOOT_SCRIPT_POSITION*), and pass it to
S3BootScriptMoveLastOpcode() and S3BootScriptLabel(), respectively.
The callees take the in/out parameter "Position" as (VOID**). Add explicit
casts for clarity.
There is no change in functionality.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The SmiHandlerRegister() function explicitly casts "SmiHandler" (of type
(SMI_HANDLER*)) to EFI_HANDLE, when outputting "DispatchHandle".
Apply the same cast in the counterpart function SmiHandlerUnRegister(),
which compares multiple "SmiHandler"s against the input "DispatchHandle".
This is a semantic cleanup; there is no functional change.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Unlike the InstallMultipleProtocolInterfaces() boot service, which takes
an (EFI_HANDLE*) as first parameter, the
UninstallMultipleProtocolInterfaces() boot service takes an EFI_HANDLE as
first parameter.
These are actual bugs. They must have remained hidden until now because
they are on error paths. Fix the UninstallMultipleProtocolInterfaces()
calls.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Clean up two issues around FindFileEx():
- The "AprioriFile" parameter's type differs between the function
declaration and the function definition. The correct type is
(EFI_PEI_FILE_HANDLE*).
- "FfsFileHeader" has type (EFI_FFS_FILE_HEADER*); for clarity, we should
cast it explicitly to EFI_PEI_FILE_HANDLE when assigning it to
(*AprioriFile).
This is a semantic cleanup, there is no functional change.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The PI spec (v1.7) correctly specifies "EFI_RUNTIME_EVENT_ENTRY.Event" in
natural language, but the field type in the structure definition itself is
wrong -- it should be EFI_EVENT, not (EFI_EVENT*).
This spec bug is likely unfixable for compatibility reasons, and so edk2
works it around already. We should clearly document the workaround.
Functionally, this patch is a no-op.
(I've also requested a non-normative (informative) clarification for the
PI spec: <https://mantis.uefi.org/mantis/view.php?id=2017>.)
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The HiiConstructConfigHdr() function takes the "DriverHandle" parameter in
order to fetch the device path from it, and then turn the device path into
PATH routing information.
The HiiConstructConfigHdr() function is called from
VariableCleanupHiiExtractConfig(), which is only installed when "Type" is
"VarCleanupManually" in PlatformVarCleanup().
In that case, we create "Private->DriverHandle" as a new handle, and
install "mVarCleanupHiiVendorDevicePath" on it. Then we pass
"Private->DriverHandle" to HiiAddPackages(), which consumes the device
path for routing purposes.
It follows that the "DriverHandle" argument passed to
HiiConstructConfigHdr() should be the same driver handle, for matching
routing.
Currently we pass "Private->HiiHandle", which is clearly a typo, because
it is the return value of HiiAddPackages(), and stands for the published
HII package list.
Therefore this patch addresses an actual bug.
The typo has not been flagged by compilers because the UEFI spec
regrettably defines both EFI_HANDLE and EFI_HII_HANDLE as (VOID*).
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
EfiCreateProtocolNotifyEvent() takes a (VOID**) for "Registration",
similarly to gBS->RegisterProtocolNotify(). We should pass the address of
an actual pointer-to-VOID, and not the address of an EFI_EVENT. EFI_EVENT
just happens to be specified as (VOID*), and has nothing to do with the
registration.
The same applies to gMmst->MmRegisterProtocolNotify().
"mFtwRegistration", "mFvRegistration", and "mFvbRegistration" are used for
nothing else.
This change is a no-op in practice; it's a semantic improvement.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
GetModuleInfoFromHandle() takes an EFI_HANDLE -- (VOID*) -- as first
parameter, but InsertFpdtRecord() passes (EFI_HANDLE*) -- (VOID**).
(VOID**) converts silently to (VOID*), which is why the wrong cast is
masked.
Note that the *value* that is passed is alright -- therefore this patch
does not change behavior --, it's just semantically wrong to pass an
(EFI_HANDLE*) where an EFI_HANDLE is expected.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
EFI_REGISTER_KEYSTROKE_NOTIFY and EFI_UNREGISTER_KEYSTROKE_NOTIFY require
the notification handle to have type (VOID*). The notification handle has
nothing to do with the EFI_HANDLE type.
This change is a semantic fix; functionally, it's a no-op.
Cc: Andrew Fish <afish@apple.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The 3rd and 4th parameters of the CloseProtocol() call are wrong.
Given that we're not dissociating a child controller from a parent
controller (= closing a BY_CHILD_CONTROLLER open), but closing a BY_DRIVER
open, the 4th parameter (ControllerHandle) should equal the 1st parameter
(Handle).
It's unclear why this code hasn't crashed before.
Note that the patch doesn't fix the underlying driver model bug. I don't
understand what the loop in MmcDriverBindingStop() attempts to do. Is this
driver supposed to be a bus driver? It seems to create new handles, and to
append device path nodes. But it doesn't set up proper parent/child
protocol opens, and it doesn't close them.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
- The 2nd parameter of EFI_SERVICE_BINDING_CREATE_CHILD is:
IN OUT EFI_HANDLE *ChildHandle
- The 2nd parameter of EFI_SERVICE_BINDING_DESTROY_CHILD is:
IN EFI_HANDLE ChildHandle
Fix the DestroyChild() call in TcpFastbootTransportStop().
This is an actual bugfix; I don't know why the current code doesn't crash.
Perhaps the function is never reached in practice? (It could be tied to an
error path.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This patch is unrelated to the rest of the series; it just makes sure that
"EmbeddedPkg/EmbeddedPkg.dsc" builds for all platforms advertised in
SUPPORTED_ARCHITECTURES (in particular, X64).
No functional changes.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The existing loop is set to call PlatformBootManagerWaitCallback every
second except the last one. We believe this is a mistake as it prevents
the called code from performing timeout expiration tasks such as, for
instance, ensuring that the last segment of a progress bar is displayed
before continuing (which is a current issue for the RPi3 platform).
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
While looking at encoding and line ending errors, I found this file
in fact simply points to a sourceforge page which no longer exists.
Since there is nothing more to say than "this is an import of
libfdt", let's just delete it.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2232
Commit 0075ab2cec introduced an issue that causes an exception
when multiple workspace packages paths are specified. For example,
if edk2-platforms is used, the root directory will contain an edk
and edk2-platforms directory representing the respective
repositories.
In GenMake, the path to the package DEC file for a module is
discovered by getting the relative path of the INF to the
workspace root directory. Each directory in the relative path
is incrementally joined to the WORKSPACE directory. The file
list in the joined path is searched for a DEC file.
As an example, if the build command is used on a package outside
the edk2 repository, the INF file path is relative to the
edk2-platforms directory not edk2. This causes directory paths
to be built that do not exist. Commit 0075ab2cec replaced the
os.path.exists() call with a try except block that always fails
when os.listdir() is invoked to enumerate the list of files in
the built directory path on packages outside edk2.
This commit restores the original conditional statement which
avoids calling os.listdir() with an invalid directory path.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2216
This patch is going to fix the lib order in static_library_files.lst.
This issue is introduced by commit 673d09a2dd.
Before 673d09a2dd, build tool apply build rule for the module's library
firstly and then apply build rule for module itself. Now, build tool
apply build rule for module self and then for its library. That behavior
impact the lib order in static_library_files.lst.
This patch is to call module's LibraryAutoGenList function
explicitly, where the applying build rule action for
library is triggered.
Cc: Liming Gao <liming.gao@intel.com>
Cc: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Tested-by: dann frazier <dann.frazier@canonical.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2218
There is a bug in current driver code that makes
it impossible for it to work with devices that
only work in legacy speed mode since the function
EmmcSwitchToHighSpeed will return with EFI_INVALID_PARAMETER
for such bus mode. Since the logic in that function will
work well for SdMmcMmcLegacy this patch just allows
to call this function with SdMmcMmcLegacy bus mode.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2218
SD specification recommends switching card bus timing before
switching bus timing in controller. Emmc driver used to do
this switch other way around. This commit adds controller
timing switch in EmmcSwitchBusTiming function to enforce this
order and removes all controller timing programming from
EmmcSwitchToXXX functions.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2218
Stopping the SD clock before switching host controller
bus timing is only necessary if preset value enable is
set in host controller. Code that performs switch to
HS200 doesn't check this condition right now and we also
don't do the SD clock stop before any other bus timing switch
in host controller. Since the driver is generally not ready to support
host controller with preset value enable set we removed this
code.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1039
Current implementation not checks system mode before using
PAGE_TABLE_LIB_PAGING_CONTEXT.ContextData.X64 or
PAGE_TABLE_LIB_PAGING_CONTEXT.ContextData.Ia32. This patch check the
mode before using the correct one.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
EBC compiler doesn't support C11 static_assert macro.
So, define STATIC_ASSERT as empty to pass EBC arch build.
STATIC_ASSERT macro is introduced @204ae9da230ecbf0910c21acac7aa5d5e8cbb8d0
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
There is no sourceX offset in case when
Configure->PixelFormat == PixelBlueGreenRedReserved8BitPerColor.
We are copying most left pixels instead of copying required rectangle.
Signed-off-by: Gris87 <Gris87@yandex.ru>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
For the LoadImage() boot service, with EFI_SECURITY_VIOLATION retval,
the Image was loaded and an ImageHandle was created with a valid
EFI_LOADED_IMAGE_PROTOCOL, but the image can not be started right now.
This follows UEFI Spec.
But if the caller of LoadImage() doesn't have the option to defer
the execution of an image, we can not treat EFI_SECURITY_VIOLATION
like any other LoadImage() error, we should unload image for the
EFI_SECURITY_VIOLATION to avoid resource leak.
This patch is to do error handling for EFI_SECURITY_VIOLATION explicitly
for the callers in ShellPkg which don't have the policy to defer the
execution of the image.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1992
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
For the LoadImage() boot service, with EFI_SECURITY_VIOLATION retval,
the Image was loaded and an ImageHandle was created with a valid
EFI_LOADED_IMAGE_PROTOCOL, but the image can not be started right now.
This follows UEFI Spec.
But if the caller of LoadImage() doesn't have the option to defer
the execution of an image, we can not treat EFI_SECURITY_VIOLATION
like any other LoadImage() error, we should unload image for the
EFI_SECURITY_VIOLATION to avoid resource leak.
This patch is to do error handling for EFI_SECURITY_VIOLATION explicitly
for the caller in PlatformDriOverrideDxe which don't have the policy to
defer the execution of the image.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1992
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
For the LoadImage() boot service, with EFI_SECURITY_VIOLATION retval,
the Image was loaded and an ImageHandle was created with a valid
EFI_LOADED_IMAGE_PROTOCOL, but the image can not be started right now.
This follows UEFI Spec.
But if the caller of LoadImage() doesn't have the option to defer
the execution of an image, we can not treat EFI_SECURITY_VIOLATION
like any other LoadImage() error, we should unload image for the
EFI_SECURITY_VIOLATION to avoid resource leak.
This patch is to do error handling for EFI_SECURITY_VIOLATION explicitly
for the callers in UefiBootManagerLib which don't have the policy to defer
the execution of the image.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1992
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
For the LoadImage() boot service, with EFI_SECURITY_VIOLATION retval,
the Image was loaded and an ImageHandle was created with a valid
EFI_LOADED_IMAGE_PROTOCOL, but the image can not be started right now.
This follows UEFI Spec.
But if the caller of LoadImage() doesn't have the option to defer
the execution of an image, we can not treat EFI_SECURITY_VIOLATION
like any other LoadImage() error, we should unload image for the
EFI_SECURITY_VIOLATION to avoid resource leak.
This patch is to do error handling for EFI_SECURITY_VIOLATION explicitly
for the callers in DxeCapsuleLibFmp which don't have the policy to defer
the execution of the image.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1992
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
For the LoadImage() boot service, with EFI_SECURITY_VIOLATION retval,
the Image was loaded and an ImageHandle was created with a valid
EFI_LOADED_IMAGE_PROTOCOL, but the image can not be started right now.
This follows UEFI Spec.
But if the caller of LoadImage() doesn't have the option to defer
the execution of an image, we can not treat EFI_SECURITY_VIOLATION
like any other LoadImage() error, we should unload image for the
EFI_SECURITY_VIOLATION to avoid resource leak.
This patch is to do error handling for EFI_SECURITY_VIOLATION explicitly
for the callers in EmbeddedPkg which don't have the policy to defer the
execution of the image.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1992
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2182
Inorder to support VS2019, we add VS2019 config process
in Setup Batch Files,
Because VS2019 and VS2017 could using same vswhere.exe
to detect the InstallationPath,
So we add the -version as the parameter of vswhere
to get the correct VS2017/VS2019's InstallationPath
v3: In BaseTools\set_vsprefix_envs.bat,
move WINSDK10_PREFIX setting into VCToolsInstallDir check condition.
Cc: Amy Chan <amy.chan@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Ching JenX Cheng <ching.jenx.cheng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Pete Batard <pete@akeo.ie>
This reverts commit bc9e4194cf.
This change causes the dependent header files are missing in Makefile.
It makes the incremental build not work. So, revert this change.
Cc: Bob Feng<bob.c.feng@Intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng<bob.c.feng@Intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2150
v4:
The v3 posting didn't do what it promised to do, so do it now for real.
V3 changes:
change to mov instruction (non locking instuction) instead
of xchg to simplify design.
V2 changes:
Add xchg 16 bit instructions to handle sgdt and sidt base
63:48 bits and 47:32 bits.
Add comment to explain why xchg 64bit isnt being used
Split lock happens when a locking instruction is used on mis-aligned data
that crosses two cachelines. If close source platform enables Alignment
Check Exception(#AC), They can hit a double fault due to split lock being
in CpuExceptionHandlerLib.
sigt and sgdt saves 10 bytes to memory, 8 bytes is base and 2 bytes is limit.
The data is mis-aligned, can cross two cacheline, and a xchg
instruction(locking instuction) is being utilize.
Signed-off-by: John E Lofgren <john.e.lofgren@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Due to needs a tackling the deficiency of the AP API, it's necessary to
ensure that in non-blocking mode previous AP executed command is
finished before starting new one.
To remedy above:
1) execute AcquireSpinLock instead AcquireSpinLockOrFail - this will
ensure time "window" to eliminate potential race condition between
BSP and AP spinLock release in non-blocking mode.
This also will eliminate possibility to start executing new AP
function before last is finished.
2) remove returns EFI_STATUS - EFI_NOT_READY - in new scenario returned
status is not necessary to caller.
Signed-off-by: Damian Nikodem <damian.nikodem@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Krzysztof Rusocki <krzysztof.rusocki@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2201
An error occurs using special VpdPcd that is not used in the Inf file
In dsc:
[PcdsDynamicExVpd.common.DEFAULT]
gBoardModuleTokenSpaceGuid.test1|*|{CODE({
{0x0} // terminator
})}
In dec:
[PcdsDynamicEx]
# Vpd GPIO table
gBoardModuleTokenSpaceGuid.test1|{0}|GPIO_INIT_CONFIG[]|0x50000018 {
<HeaderFiles>
Library/GpioLib.h
<Packages>
MdePkg/MdePkg.dec
}
ValueError: invalid literal for int() with base 0: '*'
This Patch is going to fix issue
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The StandaloneMmPkg .DSC file went out of sync with the changes
applied to the package when I enabled this code on the Synquacer
platform in edk2-platforms. So apply the necessary changes to make
this package build in isolation.
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Build-tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2188
build -p MdeModulePkg\MdeModulePkg.dsc -a IA32 -m
MdeModulePkg\Universal\PCD\Pei\Pcd.inf
Error:
AttributeError: 'PlatformInfo' object has no attribute
'DynamicPcdList'
The DSC data object used to build a separate module today
is PlatformInfo rather than PlatformAutoGen
'PlatformAutoGen' object has attribute 'DynamicPcdList'
This patch is going to fixed this issue
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The header files are used but missing in INF, which causes
warning message when building them.
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
After upgrading the CI system we use for building the ArmVirtPkg
targets, we started seeing failures due to the NOOPT build running
out of space when using the CLANG38 toolchain definition combined
with clang 7.
We really don't want to increase the FD/FV sizes in general to
accommodate this, so parameterize the relevant quantities and
increase them by 50% for NOOPT builds.
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Today's behavior is to enable 5l paging when CPU supports it
(CPUID[7,0].ECX.BIT[16] is set).
The patch changes the behavior to enable 5l paging when two
conditions are both met:
1. CPU supports it;
2. The max physical address bits is bigger than 48.
Because 4-level paging can support to address physical address up to
2^48 - 1, there is no need to enable 5-level paging with max
physical address bits <= 48.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
When building BaseTools, GNUmakefile builds create directory
BaseTools/Source/C/libs/. On the other hand, Makefile builds use libs
as an nmake pseudo target, so it either must NOT exist as a file or
directory, OR it must phony dependency like .PHONY. The latter
solution conflicts with NmakeSubdirs.py. Therefore, I make it go away
in the cleanall target. I could also add it to the clean target, but
it strikes me that cleanall should be more forceful.
Signed-off-by: Burt Silverman <burtms@gmail.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2157
Hii Pcd links to a efi variable. The Variable
default value is evaluated by related Hii Pcds
setting. If multiple Hii Pcds links to one variable,
and the offset overlap, the later Hii Pcds setting
should be effective. There is a tool bug that is if
the Pcds are in different dsc file which are included
into the platform dsc file, build tool does not get
the Pcds relative position correctly. That means
build tool does not know which Pcd is the later one. As
the result, the variable default value will be incorrect.
This patch is to fix this bug.
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
To support auto-connection, EFI_BLUETOOTH_LE_SMP_DATA_TYPE needs to
add a new data type EfiBluetoothSmpPeerAddressList which associates
with a list of Bluetooth per address connected before.
This new data type was added in UEFI spec 2.7b.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1778
We are going to add keyword (lower case) 'static' for functions and global
variables which are not referenced outside their current C file.
However, the ECC tool only recognizes upper case 'STATIC' at this moment.
This will lead to issue reports for new codes that follow the above coding
style.
This patch is going to handle lower case 'static'
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The LoadImage() boot service is a bit unusual in that it allocates
resources in a particular failure case; namely, it produces a valid
"ImageHandle" when it returns EFI_SECURITY_VIOLATION. This is supposed to
happen e.g. when Secure Boot verification fails for the image, but the
platform policy for the particular image origin (such as "fixed media" or
"removable media") is DEFER_EXECUTE_ON_SECURITY_VIOLATION. The return code
allows platform logic to selectively override the verification failure,
and launch the image nonetheless.
ArmVirtPkg/PlatformBootManagerLib does not override EFI_SECURITY_VIOLATION
for the kernel image loaded from fw_cfg -- any LoadImage() error is
considered fatal. When we simply treat EFI_SECURITY_VIOLATION like any
other LoadImage() error, we leak the resources associated with
"KernelImageHandle". From a resource usage perspective,
EFI_SECURITY_VIOLATION must be considered "success", and rolled back.
Implement this rollback, without breaking the proper "nesting" of error
handling jumps and labels.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1992
Fixes: 23d04b58e2
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Incorporate the stack protector library into the AARCH64 build of
the Shell binaries as a NULL library resolution, to avoid build
errors when the compiler injects stack integrity checks.
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In some cases, the CLANG38 toolchain profile in LTO mode emits GOT
based relocations in spite of our attempts to avoid this, by using
hidden visibility, -Bsymbolic etc.
On AARCH64, we managed to work around this by processing the GOT
based relocations in GenFw. As it turns out, the same issue exists
on 32-bit ARM, but unfortunately, we cannot use a similar trick to
get rid of the GOT entry, and the relocation metadata is insufficient
to locate the GOT entry in the binary.
Note that in this particular case, we are interested in PIE linking
only (i.e., producing a .rela section containing dynamic relocations
that the startup code can process directly), and not in position
independent code generation, and by passing the -pie option to the
linker directly using -Wl,-pie (and dropping -shared), we can coerce
the GOLD linker into doing only the former rather than both when it
performs its LTO code generation.
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2153
Current logic will skip searching EFI_PEI_CORE_FV_LOCATION_PPI when the
PPI in PpiList having EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST flag,
but platform may pass single PPI in PpiList that should be supported.
Changed the logic to verify PpiList first before checking
EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST flag.
Test: Verified both single EFI_PEI_CORE_FV_LOCATION_PPI and multiple
PPIs in PpiList cases and both can boot with the PeiCore
specified by EFI_PEI_CORE_FV_LOCATION_PPI.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
We take great care to avoid GOT based relocations in EDK2 executables,
primarily because they are pointless - we don't care about things like
the CoW footprint or relocations that target read-only sections, and so
GOT entries only bloat the binary.
However, in some cases (e.g., when building the relocatable PrePi SEC
module in ArmVirtPkg with the CLANG38 toolchain), we may end up with
some GOT based relocations nonetheless, which break the build since
GenFw does not know how to deal with them.
The relocations emitted in this case are ADRP/LDR instruction pairs
that are annotated as GOT based, which means that it is the linker's
job to emit the GOT entry and tag it with an appropriate dynamic
relocation that ensures that the correct absolute value is stored into
the GOT entry when the executable is loaded. This dynamic relocation is
not visible to GenFw, and so populating the PE/COFF relocation section
for these entries is non-trivial.
Since each ADRP/LDR pair refers to a single symbol that is local to the
binary (given that shared libraries are not supported), we can actually
convert the ADRP/LDR pair into an ADRP/ADD pair that produces the symbol
address directly rather than loading it from memory. This leaves the
GOT entry in the binary, but since it is now unused, it is no longer
necessary to emit a PE/COFF relocation entry for it.
Acked-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1955
Refer to PCI express base specification Reversion 5.0, Version
1.0, Table 7-33, Supported Link Speeds Vector bit 3 indicate
the speed 16 GT/s and bit 4 indicate the speed 32 GT/s.
Add the support to shell command 'pci ...'.
Change the MaxLinkSpeed other values' result from 'Unknown'
to 'Reserved' to make the result align.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Oleksiy <oleksiyy@ami.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
PcdRealTimeClockUpdateTimeout is now defined in MdeModulePkg.dec.
This is the only reason that causes PcAtChipsetPkg depends on
MdeModulePkg.
Move the PCD from MdeModulePkg.dec to PcAtChipsetPkg.dec removes
such dependency.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
There are three PCDs that may impact the behavior of each other in
SMM environment:
PcdCpuSmmProfileEnable
PcdHeapGuardPropertyMask in MdeModulePkg
PcdCpuSmmRestrictedMemoryAccess
The patch updates the comments in DEC file to document it.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Today's behavior is to always restrict access to non-SMRAM regardless
the value of PcdCpuSmmRestrictedMemoryAccess.
Because RAS components require to access all non-SMRAM memory, the
patch changes the code logic to honor PcdCpuSmmRestrictedMemoryAccess
so that only when the PCD is true, the restriction takes affect and
page table memory is also protected.
Because IA32 build doesn't reference this PCD, such restriction
always takes affect in IA32 build.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The patch changes PiSmmCpu driver to consume PCD
PcdCpuSmmRestrictedMemoryAccess.
Because the behavior controlled by PcdCpuSmmStaticPageTable in
original code is not changed after switching to
PcdCpuSmmRestrictedMemoryAccess.
The functionality is not impacted by this patch.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The patch adds a new X64 only PCD PcdCpuSmmRestrictedMemoryAccess.
The PCD indicates access to non-SMRAM memory is restricted to
reserved, runtime and ACPI NVS type after SmmReadyToLock.
MMIO access is always allowed regardless of the value of this PCD.
Loose of such restriction is only required by RAS components in X64
platforms.
The PCD value is considered as constantly TRUE in IA32 platforms.
When the PCD value is TRUE, page table is initialized to cover all
memory spaces and the memory occupied by page table is protected by
page table itself as read-only.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Since TianoCore EDK2 commit d65f2cea36 ("ShellPkg/CommandLib: Locate
proper UnicodeCollation instance") in edk2 the UEFI Shell crashes if EFI
variable PlatformLang is not defined due to dereferencing gUnicodeCollation
gUnicodeCollation (= NULL) in ShellCommandRegisterCommandName().
Furthermore CommandInit() is leaking PlatformLang if
gUnicodeCollation != NULL.
Close the memory leak and use the first UnicodeCollation instance if
PlatfomLang is not defined.
Fixes: d65f2cea36 ("ShellPkg/CommandLib: Locate proper UnicodeCollation
instance")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2138
Added checks for return parameters of GetSupportedTypes
function calls in InternalHstiFindAip to improve error handling.
An issue was observed on Dell Poweredge R740, where the Dell
PERC H740P controller UEFI driver returned InfoTypesBuffer = NULL,
InfoTypesBufferCount = 0 and caused an FreePool assert.
Signed-off-by: Jayanth Raghuram <Jayanth.Raghuram@Dell.com>
Cc: Wei G Liu <Wei_G_Liu@Dell.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2136
SecPlatformMain is a platform hook function which let platform does
some update. Some platform may adjust SecCoreData->PeiTemporaryRamBase
which caused former saved AllSecPpiList variable invalid.
This patch update the logic to get AllSecPpiList after SecPlatformMain.
If SecPlatformMain() returns no platform-specific PPI list, then there
is nothing to merge, so we don't need "AllSecPpiList" at all.
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2104
When UEFI Applications or UEFI Drivers are unloaded,
the PeCoffLoaderUnloadImageExtraAction() needs to unload
the image using FreeLibrary() if the image was successfully
loaded using LoadLibrrayEx().
This is a regression from the Nt32Pkg that supported
unloading applications and drivers as well as loading
the same application or driver multiple times.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Andrew Fish <afish@apple.com>
Tested-by: Tim Lewis <tim.lewis@insyde.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2103
Current CopyFileOnChange() and SaveFileOnChange() in
BaseTools\Source\Python\Common\Misc.py don't use the dedicated
long file path API to handle the file path strings and cannot
support the long file path copy and save in windows. This patch
enhances them to support the long file path copy and save
correctly.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Steven Shi <steven.shi@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Introduce PcdXenGrantFrames to replace a define in XenBusDxe and allow
the same value to be used in a different module.
The reason for the number of page to be 4 doesn't exist anymore, so
simply remove the comment.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-33-anthony.perard@citrix.com>
On a Xen PVH guest, none of the existing serial or console interface
works, so we add a new one, based on XenConsoleSerialPortLib, and
implemented via SerialDxe.
That is a simple console implementation that can work on both PVH
guest and HVM guests, even if it is rarely going to be used on HVM.
Have PlatformBootManagerLib look for the new console, when running as a
Xen guest.
Since we use VENDOR_UART_DEVICE_PATH, fix its description and coding
style.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-32-anthony.perard@citrix.com>
When running as a Xen PVH guest, there is no CMOS to read the memory
size from. Rework GetSystemMemorySize(Below|Above)4gb() so they can
work without CMOS by reading the e820 table.
Rework XenPublishRamRegions to also care for the reserved and ACPI
entry in the e820 table. The region that was added by InitializeXen()
isn't needed as that same entry is in the e820 table provided by
hvmloader.
MTRR settings aren't modified anymore, on HVM it's already done by
hvmloader, on PVH it is supposed to have sane default. MTRR will need
to be done properly but keeping what's already been done by programs
that have run before OVMF will do for now.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-24-anthony.perard@citrix.com>
The ACPI Timer isn't present in a PVH guest, but local APIC works on
both PVH and HVM.
Note that the use of SecPeiDxeTimerLibCpu might be an issue with a
driver of type DXE_RUNTIME_DRIVER. I've attempted to find out which of
the DXE_RUNTIME_DRIVER uses the TimerLib at runtime. I've done that by
replacing the TimerLib evaluation in
[LibraryClasses.common.DXE_RUNTIME_DRIVER] by a different one and
checking every module that uses it (with the --report-file=report
build option).
ResetSystemRuntimeDxe is calling the TimerLib API at runtime to do the
operation "EfiResetCold", so this may never complete if the OS have
disabled the Local APIC Timer.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-10-anthony.perard@citrix.com>
This patch allows the ResetVector to be run indenpendently from build
time addresses.
The goal of the patch is to avoid having to create RAM just below 4G
when creating a Xen PVH guest while being compatible with the way
hvmloader currently load OVMF, just below 4G.
Only the new PVH entry point will do the calculation.
The ResetVector will figure out its current running address by creating
a temporary stack, make a call and calculate the difference between the
build time address and the address at run time.
This patch copies and make the necessary modification to some other asm
files:
- copy of UefiCpuPkg/.../Flat32ToFlat64.asm:
Allow Transition32FlatTo64Flat to be run from anywhere in memory
- copy of UefiCpuPkg/../SearchForBfvBase.asm:
Add a extra parameter to indicate where to start the search for the
boot firmware volume.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-9-anthony.perard@citrix.com>
This patch changes the flash device image of OvmfXen to make it look
like it's an ELF. For this, we replace the empty embedded variable store
by a binary array, which is a ELF file header.
The ELF header explain to a loader to load the binary at the address
1MB, then jump to the PVH entry point which will be created in a later
patch. The header also includes a Xen ELF note that is part of the
PVH ABI.
That patch include OvmfXenElfHeaderGenerator.c which can be use to
regenerate the ELF header, but this will be a manual step.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-6-anthony.perard@citrix.com>
Introduce XenPlatformPei, a copy of OvmfPkg/PlatformPei without some
of QEMU specific initialization, Xen does not support QemuFwCfg.
This new module will be adjusted to accommodate Xen PVH.
fw_cfg dependents that have been removed, which are dynamically skipped
when running PlatformPei on Xen:
- GetFirstNonAddress(): controlling the 64-bit PCI MMIO aperture via the
(experimental) "opt/ovmf/X-PciMmio64Mb" file
- GetFirstNonAddress(): honoring the hotplug DIMM area
("etc/reserved-memory-end") in the placement of the 64-bit PCI MMIO
aperture
- NoexecDxeInitialization() is removed, so PcdPropertiesTableEnable and
PcdSetNxForStack are left constant FALSE (not set dynamically from
fw_cfg "opt/ovmf/PcdXxxx")
- MaxCpuCountInitialization(), PublishPeiMemory(): the max CPU count is
not taken from the QemuFwCfgItemSmpCpuCount fw_cfg key;
PcdCpuMaxLogicalProcessorNumber is used intact and
PcdCpuApInitTimeOutInMicroSeconds is never changed or used.
- InitializeXenPlatform(), S3Verification(): S3 is assumed disabled (not
consulting "etc/system-states" via QemuFwCfgS3Enabled()).
- InstallFeatureControlCallback(): the feature control MSR is not set
from "etc/msr_feature_control"
(also removed FeatureControl.c as there is nothing been executed)
Also removed:
- SMRAM/TSEG-related low mem size adjusting (PcdSmmSmramRequire is
assumed FALSE) in PublishPeiMemory(),
- QemuInitializeRam() entirely,
Xen related changes:
- Have removed the module variable mXen, as it should be always true.
- Have the platform PEI initialization fails if Xen has not been
detected.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-5-anthony.perard@citrix.com>
Introduce XenResetVector, a copy of OvmfPkg/ResetVector, with one
changes:
- SEC_DEFAULT_CR0: enable cache (bit 30 or CD set to 0)
Xen copies the OVMF code to RAM, there is no need to disable cache.
This new module will later be modified to add a new entry point, more
detail in a following commit "OvmfPkg/XenResetVector: Add new entry point
for Xen PVH"
Value FILE_GUID of XenResetVector have not changed compare to ResetVector
because it is a special value (gEfiFirmwareVolumeTopFileGuid).
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-4-anthony.perard@citrix.com>
OvmfXen is a copy of OvmfX64, removing VirtIO and some SMM.
This new platform will be changed to make it works on two types of Xen
guest: HVM and PVH.
Compare to OvmfX64, this patch:
- changed: PLATFORM_GUID, OUTPUT_DIRECTORY, FLASH_DEFINITION
- removed: VirtioLib class resolution
- removed: all UEFI_DRIVER modules for virtio devices
- removed: DXE_SMM_DRIVER and SMM_CORE lib class resolutions
- removed: DXE_SMM_DRIVER and SMM_CORE FDF rules
- removed: Everything related to SMM_REQUIRE==true
- removed: Everything related to SECURE_BOOT_ENABLE==true
- removed: Everything related to TPM2_ENABLE==true
- changed: PcdPciDisableBusEnumeration dynamic default flipped to TRUE
- changed: default FD_SIZE_IN_KB to 2M.
- reverted d272449d9e, "OvmfPkg: raise DXEFV size to 11 MB"
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-3-anthony.perard@citrix.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2040
Below code is current implementation:
if (MsrRegister[ProcessorNumber].Bits.Lock == 0) {
CPU_REGISTER_TABLE_WRITE_FIELD (
ProcessorNumber,
Msr,
MSR_IA32_FEATURE_CONTROL,
MSR_IA32_FEATURE_CONTROL_REGISTER,
Bits.Lock,
1
);
}
1. In first normal boot, the Bits.Lock is 0, 1 will be added
into the register table and then will set to the MSR.
2. Trig warm reboot, MSR value preserves. After normal boot phase,
the Bits.Lock is 1, so it will not be added into the register
table during the warm reboot phase.
3. Trig S3 then resume, the Bits.Lock change to 0 and Bits.Lock is
not added in register table, so it's still 0 after resume. This
is not an expect behavior. The expect value is the value should
always 1 after booting or resuming from S3.
The root cause for this issue is
1. driver bases on current value to insert the "set value action" to
the register table.
2. Some MSRs may reserve their value during warm reboot.
The solution for this issue is using new added macros for the MSRs which
preserve value during warm reboot.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2040
Add below new micros which test the current value before write the new
value. Only write new value when current value not same as new value.
CPU_REGISTER_TABLE_TEST_THEN_WRITE32
CPU_REGISTER_TABLE_TEST_THEN_WRITE64
CPU_REGISTER_TABLE_TEST_THEN_WRITE_FIELD
Also add below API:
CpuRegisterTableTestThenWrite
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Reclaim may free page table pages that are required to handle current page
fault. This causes a page leak, and, after sufficent number of specific
page fault+reclaim pairs, we run out of reclaimable pages and hit:
ASSERT (MinAcc != (UINT64)-1);
To remedy, prevent pages essential to handling current page fault:
(1) from being considered as reclaim candidates (first reclaim phase)
(2) from being freed as part of "branch cleanup" (second reclaim phase)
Signed-off-by: Damian Nikodem <damian.nikodem@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Krzysztof Rusocki <krzysztof.rusocki@intel.com>
The Fpdt driver (FirmwarePerformanceDxe) saves a memory address across
reboots, and then does an AllocatePage for that memory address.
If, on this boot, that memory comes from a Runtime memory bucket,
the MAT table is not updated. This causes Windows to boot into Recovery.
This patch blocks the memory manager from changing the page
from a special bucket to a different memory type. Once the buckets are
allocated, we freeze the memory ranges for the OS, and fragmenting
the special buckets will cause errors resuming from hibernate (S4).
The references to S4 here are the use case that fails. This
failure is root caused to an inconsistent behavior of the
core memory services themselves when type AllocateAddress is used.
The main issue is apparently with the UEFI memory map -- the UEFI memory
map reflects the pre-allocated bins, but the actual allocations at fixed
addresses may go out of sync with that. Everything else, such as:
- EFI_MEMORY_ATTRIBUTES_TABLE (page protections) being out of sync,
- S4 failing
are just symptoms / consequences.
This patch is cherry pick from Project Mu:
a9be767d9b
With the minor change,
1. Update commit message format to keep the message in 80 characters one line.
2. Remove // MU_CHANGE comments in source code.
3. Update comments style to follow edk2 style.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2079
The Basetool CopyFileOnChange() and SaveFileOnChange()
functions might raise the IOError occasionally when build
in Windows with multi-process and build cache enabled.
The CopyFileOnChange() and SaveFileOnChange() might be invoked
in multiple sub-processes simultaneously, and this patch adds
global locks to sync these functions invoking which can
harden their reliability.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Steven Shi <steven.shi@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1951
Current build cache use the module's [self.Arch][self.Name]
info as the ModuleAutoGen object key in hash list and dictionary.
The [self.Arch][self.Name] is not safe as the module key because
there could be two modules with same module name and arch name in
one platform. E.g. A platform can override a module or library
instance in another different path, the overriding module can has
the same module name and arch name as the original one.
Directly use the ModuleAutoGen obj self as the key, because
the obj __hash__ and __repr__ attributes already contain the
full path and arch name.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Steven Shi <steven.shi@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1927
Current cache hash algorithm does not parse and generate
the makefile to get the accurate dependency files for a
module. It instead use the platform and package meta files
to get the module depenedency in a quick but over approximate
way. These meta files are monolithic and involve many redundant
dependency for the module, which cause the module build
cache miss easily.
This patch introduces one more cache checkpoint and a new
hash algorithm besides the current quick one. The new hash
algorithm leverages the module makefile to achieve more
accurate and precise dependency info for a module. When
the build cache miss with the first quick hash, the
Basetool will caculate new one after makefile is generated
and then check again.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Steven Shi <steven.shi@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1941
The two CHAR16 array ChildCountStr and DeviceCountStr is
defined to hold the decimal string data of UINTN. The max
of UINTN is 18446744073709551615 and it contain 20 characters.
So make their size to 21 CHAR16s to hold the string data with
a null-terminate.
UnicodeValueToStringS regard the value input as INT64, and
21 CHARs is enough to hold the lowest value with minus '-'.
Although the value shouldn't be such big.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Oleksiy <oleksiyy@ami.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Linson Augustine <Linson.augustine@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The local variable PpiArray[10] is declared in the middle
of the SEC module _ModuleEntryPoint() with its own scope.
However, PpiArray has a dangling reference to its location
on the stack after the scope is closed. This causes issues
with some compilers (e.g. XCODE5).
The fix is to move the declaration of PpiArray[10] to
the beginning of the function, so it is scoped correctly
for all references to this local variable and references
to its location.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Andrew Fish <afish@apple.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Andrew Fish <afish@apple.com>
Disable TftpDynamicCommand for XCODE5 because this command
places HII content in an PE/COFF resource section that is not
supported by the XCODE5 tool chain, and the missing HII
content causes the load of this command to ASSERT().
Disable the LogoDxe module that places the logo bitmap in
a PE/COFF resource section that is not supported by the
XCODE5 tool chain, and the missing HII content causes
the load of this module to ASSERT().
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Andrew Fish <afish@apple.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Andrew Fish <afish@apple.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2056
The IA32 build of the EmulatorPkg for VS20xx does not boot
because the default value of PCD PcdPeiServicesTablePage
rarely succeeds to be mapped on IA32 Windows Host Environments.
Change the DEC default value for this PCD to a value that
is compatible with Windows and POSIX host environments for
IA32 and X64. For IA32 builds, this 64-bit PCD is truncated
to a 32-bit value.
PcdPeiServicesTablePage is changed from 0x1003000000 to
0x1013000000. With this new value, no boot failures are
observed. However, the use of this hard coded value can
potentially cause a boot failure if this address specified
by the PCD is already allocated in the user process.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Andrew Fish <afish@apple.com>
Initialize PageMapLevel5Entry at the beginning of the function.
This commit will fix a GCC 4.8.5 build failure introduced by commit
b3527dedc3.
OvmfPkg build failure wtih gcc 4.8.5 still exists at latest edk2 version.
The commit 46f8a68916 seems not to fix
the build failure completely.
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1837
The tool is designed to generate Windows Firmware Update Drivers,
the input is one drivername.cap with related parameters, the output
Windows Driver package are composed by drivername.cap, drivername.inf
and drivername.cat to update the single payload in device.
usage:
GenerateWindowsDriver [-h] [--output-folder OUTPUTFOLDER]
[--product-fmp-guid PRODUCTFMPGUID]
[--capsuleversion-dotstring CAPSULEVERSION_DOTSTRING]
[--capsuleversion-hexstring CAPSULEVERSION_HEXSTRING]
[--product-fw-provider PRODUCTFWPROVIDER]
[--product-fw-mfg-name PRODUCTFWMFGNAME]
[--product-fw-desc PRODUCTFWDESC]
[--capsule-file-name CAPSULEFILENAME]
[--pfx-file PFXFILE] [--arch ARCH]
[--operating-system-string OPERATINGSYSTEMSTRING]
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Kinney Michael D <michael.d.kinney@intel.com>
Signed-off-by: Eric Jin <eric.jin@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1525
Add PCD PcdFmpDeviceStorageAccessEnable. If this PCD is
TRUE, then the Firmware Management Protocol supports access
to the firmware storage device. This is the default setting.
If FALSE, then Firmware Management Protocol services that
access the firmware storage device return EFI_UNSUPPORTED
except GetImageInfo(). Setting this value to FALSE produces
the smallest possible FmpDxe driver that still advertises the
updatable firmware component in the ESRT.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Eric Jin <eric.jin@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1525
* Add Capsule Update Policy Protocol to FmpDevicePkg
* Add CapsuleUpdatePolicyLib instance that uses the services
of the Capsule Update Policy Protocol
* Add module that produces the Capsule Update Policy
Protocol using the services of the CapsuleUpdatePolicyLib
class.
* Update FmpDevicePkg DSC to build the new library instance
and the new module and update builds of FmpDxe modules
to demonstrate the use of the different CapsuleUpdatePolicyLib
instances.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Eric Jin <eric.jin@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
buildoptions is used by build.py and TargetTxtClassObj.py
Move buildoptions.py to Common folder so that
build tool and ECC tool work fine.
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This commit will fix a GCC 4.8.5 build failure introduced by commit
b3527dedc3.
PageMapLevel5Entry may be uninitialized in original code, which means
uninitialized pointer will be modified at some circumstance.
So relocate the operation of PageMapLevel5Entry++ in order to make sure
the pointer could be modified only when it is initialized.
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1343
This commit adds EDKII_UFS_HC_PLATFORM_PROTOCOL implementation
in UfsPassThruDxe driver in version 1. Driver assumes that at
most one instance of the protocol exists in the system. Presence
of the protocol is not mandatory.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1343
Private data has been refactored to use EDKII_UFS_HC_INFO structure
to store host controller capabilities and version
information. Getting host controller data has been moved
into single place and is done before host controller enable.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1343
EDKII_UFS_HC_PLATFORM_PROTOCOL will allow the platform to inject
platform specific logic into standard UFS flows. Right now we
support callbacks pre and post host controller enable and pre
and post link startup. Provided callbacks allow the platform
driver to inject UIC programming after HCE is set which is
a standard initialization step covered by UFS specification as
well as cover some additional use cases during other callbacks.
For instance platform driver may switch to fast mode after link
startup.
We also allow the platform to override host controller capabilities
and version which might be useful to manage silicon bugs or
allow testing experimental features from new versions of the
specification.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2049
ShellPkg\Library\UefiShellLevel2CommandsLib\Cp.c line 104 and
ShellPkg\Library\UefiShellLevel2CommandsLib\Mv.c line 640, the
pointer variable Response may be a NULL pointer. So we should
make sure that it isn't NULL before dereference it.
If Response is NULL that indicates a EFI_OUT_OF_RESOURCES
error, directly return SHELL_ABORTED.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Modify the SRAT parsing logic to prevent reading past the table buffer
length provided.
Check if the Static Resource Allocation Structure's buffer fits in the
SRAT table buffer before its contents are dumped.
Prevent buffer overruns when reading the Static Resource Allocation
Structure's header.
References:
- ACPI 6.3, January 2019, Section 5.2.16
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@inte.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Modify the PPTT table parsing logic to prevent reading past the ACPI
buffer lengths provided.
Check if the Number of Private Resources specified in the Processor
Hierarchy Node (Type 0) is possible given the Type 0 Structure's buffer
length.
Make sure that the processor topology structure's buffer fits in the
PPTT table buffer before its contents are dumped.
Prevent buffer overruns when reading the processor topology structure's
header.
References:
- ACPI 6.3, January 2019, Section 5.2.29
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@inte.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Modify the parsing logic to prevent reading past the MADT table buffer
length provided when parsing the Interrupt Controller Structure header.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@inte.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Modify the IORT table parsing logic to prevent reading past the buffer
lengths provided.
Change DumpIortNodeIdMappings() function's signature and implementation
to simplify buffer overrun prevention. Update all calls to this
function accordingly.
Modify the parser for each type of IORT node such that the offset from
the start of the node's buffer is tracked as the parsing function is
executed. Again, this change helps prevent buffer overruns.
Test that the IORT node buffer fits in the table buffer before the
node's buffer contents are dumped.
References:
- IO Remapping Table (Issue D), Platform Design Document, March 2018
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@inte.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Modify the GTDT table parsing logic to prevent reading past the ACPI
buffer lengths provided and to make it consistent with other table
parsers. This includes converting the do-while loop in ParseAcpiGtdt()
into a while loop.
Remove a check which ensures that the entire Platform GT Block
Structure buffer has been parsed. The ACPI specification does not ban
from defining buffers which are larger than the size indicated by the
count and sizes of substructures which constitute it.
Change the data type of the Length parameter to the DumpGTBlock()
function to reflect the width of the respective ACPI structure's
field.
References:
- ACPI 6.3, January 2019, Table 5-124
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@inte.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Modify the DBG2 table parsing logic to prevent reading past the ACPI
buffer lengths provided.
Modify the signature of the DumpDbgDeviceInfo() function to make it
consistent with the ACPI structure processing functions in other
acpiview parsers. Now, the length of the Debug Device Information
Structure is read before the entire structure is dumped.
This refactoring change makes it easier to stop reading beyond the
DBG2 table buffer if the Debug Device Information Structure Buffer
does not fit in the DBG2 buffer.
For processing the first two fields of the Debug Device Information
Structure (to get the length) a new ACPI_PARSER array is defined.
References:
- Microsoft Debug Port Table 2 (DBG2), December 10, 2015
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@inte.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2051
Original code GetConfigTable for AddrPtr first, if failed,
InstalConfigTable with allocated AddrPtr. So the AddrPtr
should not be NULL and the NULL pointer dereference case
should be false positive. This patch is just to address
the case raised from static analysis.
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1875
1. Separate the AutoGen.py into 3 small py files.
One is for AutoGen base class, one is for WorkspaceAutoGen class
and PlatformAutoGen class, and the one for ModuleAutoGen class.
2. Create a new class DataPipe to store the Platform scope settings.
Create a new class PlatformInfo to provide the same interface
as PlatformAutoGen. PlatformInfo class is initialized by
DataPipe instance.
Create a new class WorkspaceInfo to provide the same interface
as WorkspaceAutoGen. WorkspaceInfo class is initialized by
DataPipe instance.
3. Change ModuleAutoGen to depends on DataPipe, PlatformInfo and
WorkspaceInfo. Remove the dependency of ModuleAutoGen to PlatformAutoGen.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1928
1. Implement OpenSSL HKDF wrapped function in CryptHkdf.c file.
2. Implement stub implementation function in CryptHkdfNull.c file.
3. Add wrapped HKDF function declaration to BaseCryptLib.h file.
4. Add CryptHkdf.c to module information BaseCryptLib.inf file.
5. Add CryptHkdfNull.c to module information PeiCryptLib.inf,
RuntimeCryptLib.inf and SmmCryptLib.inf
Signed-off-by: Gary West <Gary.West@intel.com>
Cc: Jian Wang <jian.j.wang@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Reviewed-by: Jian Wang <jian.j.wang@intel.com>
The patch moves all files under UefiCpuPkg/Include/Register/ to
MdePkg/Include/Register using following detailed approaches:
1. Move UefiCpuPkg/Include/Register/Amd/ to
MdePkg/Include/Register/Amd folder.
2. Move remaining in UefiCpuPkg/Include/Register/ to
MdePkg/Include/Register/Intel folder.
3. Create wrapper header files under UefiCpuPkg/Include/Register/
to include the accordingly files in MdePkg/Include/Register/Intel.
This is to avoid build break because code in other repos like
edk2-platform includes the file from UefiCpuPkg.
The wrapper header files will be removed after all consumers code
is updated.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2008
DxeIpl is responsible to create page table for DXE phase running
either in long mode or in 32bit mode with certain protection
mechanism enabled (refer to ToBuildPageTable()).
The patch updates DxeIpl to create 5-level page table for DXE phase
running in long mode when PcdUse5LevelPageTable is TRUE and CPU
supports 5-level page table.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Today's code defines macros like CR0_PG, CR0_WP, CR4_PSE, CR4_PAE
when checking whether individual bits are set in CR0 or CR4 register.
The patch changes the code to use IA32_CR0 and IA32_CR4 structure
defined in MdePkg/Include/Library/BaseLib.h so that the module
local macros can be removed.
There is no functionality impact to this change.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2008
MpInitLib is the library that's responsible to wake up APs to provide
MP PPI and Protocol services.
The patch synchronizes BSP's CR4.LA57 to each AP's CR4.LA57.
Without this change, AP may enter to GP fault when BSP's 5-level page
table is set to AP during AP wakes up.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1525
The patch is to merge multiple FMP instances into single ESRT entry
when they have the same GUID.
The policy to LastAttemptStatus/LastAttemptVersion of ESRT entry is:
If all the LastAttemptStatus are LAST_ATTEMPT_STATUS_SUCCESS, then
LastAttemptVersion should be the smallest of LastAttemptVersion. If
any of the LastAttemptStatus is not LAST_ATTEMPT_STATUS_SUCCESS,
then the LastAttemptVersion/LastAttemptStatus should be the values
of the first FMP instance whose LastAttemptStatus is not
LAST_ATTEMPT_STATUS_SUCCESS.
To detect possible duplicated GUID/HardwareInstance, a table of
GUID/HardwareInstance pairs from all the EFI_FIRMWARE_IMAGE_DESCRIPTORs
from all FMP instances is built. If a duplicate is found, then generate
a DEBUG_ERROR message, generate an ASSERT(), and ignore the duplicate
EFI_FIRMWARE_IMAGE_DESCRIPTOR.
Add an internal worker function called FmpGetFirmwareImageDescriptor()
that retrieves the list of EFI_FIRMWARE_IMAGE_DESCRIPTORs from a single
FMP instance and returns the descriptors in an allocated buffer. This
function is used to get the descriptors used to build the table of
unique GUID/HardwareInstance pairs. It is then used again to generate
the ESRT Table from all the EFI_FIRMWARE_IMAGE_DESCRIPTORs from all the
FMP instances. 2 passes are performed so the total number of
descriptors is known. This allows the correct sized buffers to always
be allocated.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Eric Jin <eric.jin@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2046
Make sure all libs that should be dynamically linked
are dynamically linked when XCODE5 compiler is used.
A previous change introduced the following pragma:
#pragma GCC visibility push (hidden)
When the EmulatorPkg is built using XCODE5 toolchain
for X64, this pragma is included and it generates a
linker error when building the Unix Host module. This
change uses !defined(__APPLE__) to prevent the use of
this pragma when building EmulatorPkg/Unix/Host.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2046
* Clean up XCODE5 IA32 [BuildOptions] and fix IA32
X11 include path.
* Add -DEFIAPI=__attribute__((ms_abi)) to X64 XCODE5
[BuildOptions]
* Use -target x86_64-apple-darwin for X64 XCODE5
[BuildOptions]
* Add Wl,-no_pie to X64 XCODE5 [BuildOptions]
* Address function type mismatch reported by XCODE5
in reverse gasket callback between UEFI ABI and
MacOS ABI. Use a UINTN to pass function address
to assembly code.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This debug message may be called by BSP and APs. It may
caused ASSERT when APs call this debug code.
In order to avoid system boot assert, Remove this debug
message.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
This debug message may be called by BSP and APs. It may
caused ASSERT when APs call this debug code.
In order to avoid system boot assert, Remove this debug
message.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
1.Remove "out" attribute for " Buffer" parameter in function header.
2.Add "out" attribute for " Token" parameter in function header.
3.Update ProcedureArgument to ProcedureArguments.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
For all other bcfg commands the "#" (option number) argument(s) are
treated as hexedecimal values regardless of whether or not they are
prefixed by "0x". This change fixes '-opt' to handle its "#"
(option number) argument consistently with the other commands.
Making this change removes a potential footgun whereby a user that
has been using a number without a "0x" prefix with other bcfg
commands finds that, on using that exact same number with '-opt', it
has this time unexpectedly been interpreted as a decimal number and
they have modified (corrupted) an unrelated load option. For
example, a user may have been specifying "10" to other commands to
have them act on the 16th option (because simply "10", without any
prefix, is how 'bcfg boot dump' displayed the option number for the
16th option). Unfortunately for them, if they also use '-opt' with
"10" it would unexpectedly and inconsistently act on the 10th option.
CC: Jaben Carsey <jaben.carsey@intel.com>
CC: Ray Ni <ray.ni@intel.com>
Signed-off-by: Jonathan Watt <jwatt@jwatt.org>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bi Dandan <dandan.bi@intel.com>
Until now, during the USB device enumeration when its PortState
USB_PORT_STAT_CONNECTION bit was not set, the stack was not informed
that the device is not present. Fix that by returning appropriate
error code.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1982
MpInitLibInitialize in MpLib.c will be invoked on both PEI and DXE
CPU code, MicrocodeDetect would be performed twice and copy
Microcode from flash to memory twice as well, which consider as
duplicate work to lead longer boot time.
This patch just use microcode memory copied in PEI phase if exist.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Move Performance Monitoring Counter Group (PMCG) node ID mapping count
validation from the core IORT acpiview parser logic to a dedicated
function. Now, the pointer to the validation function is passed to the
IortNodePmcgParser[] ACPI_PARSER array.
This check does not affect the flow of IORT parsing and is limited to
a single table field in scope, therefore, it is better to keep it away
from the code responsible for traversing the table.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Split the Interrupt Controller Structure length validation in the
acpiview UEFI shell tool into two logical parts:
1. Ensuring MADT table parser forward progress.
2. Preventing MADT table buffer overruns.
Also, make the condition for infinite loop detection applicable to
all types of Interrupt Controller Structures (for all interrupt models
which can be represented in MADT). Check if the controller length
specified is shorter than the byte size of the first two fields
('Type' and 'Length') present in every valid Interrupt Controller
Structure.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
List ParseAcpi() function arguments one per line in order to make this
function call consistent with ParseAcpi() calls in other ACPI table
parsers.
Also, notify the user that XsdtAddress value of 0 results in RSDP
parsing being terminated and that the XSDT table will not be processed.
This effectively means that no more ACPI tables will be parsed because
of this RSDP table content error.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Remove a call to ParseAcpi() responsible for getting the XSDT table
length. This call is not needed because the ACPI table buffer length is
provided as an input argument to the ParseAcpiXsdt() function.
Modify remaining code to use the AcpiTableLength argument of the
ParseAcpiXsdt() function instead of a global static variable.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Modify the signature of the DumpGasStruct() function to include the
buffer length parameter and to return the number of bytes parsed by
the function.
This way it becomes possible to prevent buffer overruns when dumping
Generic Address Structure's (GAS) fields in the acpiview table
parsers.
Update all existing DumpGasStruct() calls in acpiview to add the
length argument.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2007
The following two PCI Capability Structure registers are updated as per
the PCI Base Specification Revision 4:-
(1) The PCI Device capability register 2(PCI_REG_PCIE_DEVICE_CAPABILITY2)
needs to be upgraded for the PCI features like -
LN system CLS (LnSystemCLS),
10b Tag completer/requester register fields
(TenBitTagCompleterSupported, TenBitTagRequesterSupported),
Emergency power reduction support and initialization requirement
(EmergencyPowerReductionSupported,
EmergencyPowerReductionInitializationRequired),
and FRS support (FrsSupported ).
(2) The PCI Device Control register 2(PCI_REG_PCIE_DEVICE_CONTROL2) needs
to be upgraded for the -
Emergency power reduction request enabling
(EmergencyPowerReductionRequest), and also the 10b Extended Tag
enabling (TenBitTagRequesterEnable).
The following two are defined as per the PCI Express Base Specification
Revision 2.1:-
(1) Defined macro definitions for all the ranges of Maximum Payload Sizes
and Maximum Read Request Sizes register fields
(2) Defined macro definitions for all the ranges of Completion Timeout
value.
Signed-off-by: Ashraf Javeed <ashraf.javeed@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In commit 1fce963d89 we reduced the level of information printed
by PeCoffLoaderRelocateImageExtraAction() but we did not update the
similar PeCoffLoaderUnloadImageExtraAction() function.
PeCoffLoaderUnloadImageExtraAction() prints helpful debugger commands
for source level debugging. These messages should not be printed on the
EFI_D_ERROR level; they don't report errors. Change the debug level
(bitmask, actually) to DEBUG_LOAD | DEBUG_INFO, because the messages are
printed in relation to image loading, and they are informative.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reported-by: Andrew Jones <drjones@redhat.com>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Specify the firmware to use via the newer '-drive if=pflash' syntax
which allows specifying the raw format parameter. This
avoids warnings with newer version of QEMU.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
$ADD_QEMU_HDA was added because QEMU used to refuse to run without a
disk. Since newer versions run without any disks, remove it.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
This reverts commit 30f6148546.
Commit 30f6148546 causes a build failure, when building for IA32:
> UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.c: In function
> 'PerformRemainingTasks':
> UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.c:1440:9: error:
> 'mCpuSmmStaticPageTable' undeclared (first use in this function)
> if (mCpuSmmStaticPageTable) {
"mCpuSmmStaticPageTable" is an X64-only variable. It is defined in
"X64/PageTbl.c", which is not linked into the IA32 binary. We must not
reference the variable in such code that is linked into both IA32 and X64
builds, such as "PiSmmCpuDxeSmm.c".
We have encountered the same challenge at least once in the past:
- https://bugzilla.tianocore.org/show_bug.cgi?id=1593
- commit 37f9fea5b8 ("UefiCpuPkg\CpuSmm: Save & restore CR2 on-demand
paging in SMM", 2019-04-04)
The right approach is to declare a new function in "PiSmmCpuDxeSmm.h", and
to provide two definitions for the function, one in "Ia32/PageTbl.c", and
another in "X64/PageTbl.c". The IA32 implementation should return a
constant value. The X64 implementation should return
"mCpuSmmStaticPageTable". (In the example named above, the functions were
SaveCr2() and RestoreCr2().)
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: push revert immediately, due to build breakage that
would have been easy to catch before submitting the patch]
Commit c60d36b4d1
* UefiCpuPkg/SmmCpu: Block access-out only when static paging is used
updated page fault handler to treat SMM access-out as allowed
address when static paging is not used.
But that commit is not complete because the page table is still
updated in SetUefiMemMapAttributes() for non-SMRAM memory. When SMM
code accesses non-SMRAM memory, page fault is still generated.
This patch skips to update page table for non-SMRAM memory and
page table itself.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2018
Current FSP SEC_IDT_TABLE structure is not natural aligned:
typedef struct _SEC_IDT_TABLE {
EFI_PEI_SERVICES *PeiService;
UINT64 IdtTable[];
} SEC_IDT_TABLE;
Compiler will insert DWORD padding between 2 elements and
GetPeiServicesTablePointer() in early phase then always
returns padding data from stack, which was not reset to 0
in SecMain.
Solution is to align FSP SEC_IDT_TABLE structure to UefiCpuPkg
to have UINT64 as PeiService field and reset it to 0.
Test: Verified on internal platform and booting successfully
with FSP API mode.
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Enable multithreaded builds by default when building OvmfPkg
using build.sh.
This can drastically reduce build times. For example, on a
modern ThreadRipper system the time required to build decreases
from 3 minutes to 1 minute.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This is a (very minor) optimization: `pwd` runs the command (even as a
built-in), whereas $PWD simply evaluates the value of the variable.
ALso, modern scripts should generally use $(...) to run commands,
instead of `...`.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Message-Id: <20190716165538.57960-1-rebecca@bsdio.com>
The BaseTools build feature introduced for TianoCore#1804 / in commit
1fa6699e6c ("BaseTools: Add a checking for Sources section in INF file",
2019-06-10) logs some (non-fatal) warnings about unlisted internal header
files. List those files explicitly.
Note: header files are added in lexicographical order only if the
underlying INF file already keeps the [Sources] and [LibraryClasses]
sections in lexicographical order. Otherwise, header files are added in
rough "logical" order.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The BaseTools build feature introduced for TianoCore#1804 / in commit
1fa6699e6c ("BaseTools: Add a checking for Sources section in INF file",
2019-06-10) logs some (non-fatal) warnings about unlisted internal header
files. List those files explicitly.
Note: header files are added in lexicographical order only if the
underlying INF file already keeps the [Sources] and [LibraryClasses]
sections in lexicographical order. Otherwise, header files are added in
rough "logical" order.
Cc: Jian Wang <jian.j.wang@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
The BaseTools build feature introduced for TianoCore#1804 / in commit
1fa6699e6c ("BaseTools: Add a checking for Sources section in INF file",
2019-06-10) logs some (non-fatal) warnings about unlisted internal header
files. List those files explicitly.
Note: header files are added in lexicographical order only if the
underlying INF file already keeps the [Sources] and [LibraryClasses]
sections in lexicographical order. Otherwise, header files are added in
rough "logical" order.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The BaseTools build feature introduced for TianoCore#1804 / in commit
1fa6699e6c ("BaseTools: Add a checking for Sources section in INF file",
2019-06-10) logs some (non-fatal) warnings about unlisted internal header
files. List those files explicitly.
Note: header files are added in lexicographical order only if the
underlying INF file already keeps the [Sources] and [LibraryClasses]
sections in lexicographical order. Otherwise, header files are added in
rough "logical" order.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2003
lstrip(parameter) do the match based on the char
in parameter but not only the whole parameter string.
In GenMake line 1082,
CmdSign.lstrip('/Fo') will strip the '/' or
'F' or 'o' on the left of CmdSign. This is not expected.
This patch is going to fix such issue.
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Remove redundant forward function declarations by repositioning
blocks of code. This way the code structure is consistent across
ACPI table parsers and the code becomes more concise.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Remove redundant forward function declarations by repositioning
blocks of code. This way the code structure is consistent across
ACPI table parsers and the code becomes more concise.
Replace multple use of literal values for GT Block Timer Frame
count/number validation with a macro definition.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Remove redundant forward function declarations by repositioning
blocks of code. This way the code structure is consistent across
ACPI table parsers and the code becomes more concise.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Remove redundant forward function declarations by repositioning
blocks of code. This way the code structure is consistent across
ACPI table parsers and the code becomes more concise.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Remove redundant forward function declarations by repositioning
blocks of code. This way the code structure is consistent across
ACPI table parsers and the code becomes more concise.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Remove redundant forward function declarations by repositioning
blocks of code. This way the code structure is consistent across
ACPI table parsers and the code becomes more concise.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Remove redundant forward function declarations by repositioning
blocks of code. This way the code structure is consistent across
ACPI table parsers and the code becomes more concise.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Add comment describing new F: and X: tags for associating maintainership
sections with specific filesystem paths, including wildcards.
Add global section associating *all* code with devel@edk2.groups.io,
with a default '*' F: tag directing all modifications that do not hit a
rule to the stewards.
Also tag all files in top directory as maintained by the stewards.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1972
AP calls CollectProcessorData() to collect processor info.
CollectProcessorData function finally calls PcdGetSize function to
get DynamicPCD PcdCpuFeaturesSetting value. PcdGetSize will use
PeiServices table which caused below assert info:
Processor Info: Package: 1, MaxCore : 4, MaxThread: 1
Package: 0, Valid Core : 4
ASSERT [CpuFeaturesPei] c:\projects\jsl\jsl_v1193\Edk2\MdePkg\Library
\PeiServicesTablePointerLibIdt\PeiServicesTablePointer.c(48):
PeiServices != ((void *) 0)
This change uses saved global pcd size instead of calls PcdGetSize to
fix this issue.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1968
The new VS2012 build failure is caused by 7a0df26.
xxx\registercpufeatureslib\dxeregistercpufeatureslib.c(258) :
warning C4701: potentially uninitialized local variable 'MpEvent' used
It is a false positive alarm.
MpEvent is assigned at line 238 and will be used at line 258, both
lines are controlled by "if (CpuFeaturesData->NumberOfCpus > 1)".
This patch initializes MpEvent to suppress incorrect compiler/analyzer
warnings.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The EDK II C Coding Standards Specification (v2.20) strongly discourages
variable declarations in nested block scope:
5 Source Files
5.4 Code File Structure
5.4.1 Scoping Rules
5.4.1.1 Scope
> Block (local) Scope
>
> [...]
>
> Data declarations may follow the opening brace of a compound statement,
> regardless of nesting depth, and before any code generating statements
> have been entered. Other than at the outermost block of a function body,
> this type of declaration is strongly discouraged.
Hoist such variable declarations in Base64Decode() to the outermost
function scope.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Fixes: 35e242b698
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1980
Reported-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1937
EFI MM MP Protocol is defined in the PI 1.5 specification.
The MM MP protocol provides a set of functions to allow execution of
procedures on processors that have entered MM. This protocol has the
following properties:
1. The caller can invoke execution of a procedure on a processor, other
than the caller, that has also entered MM. Supports blocking and
non-blocking modes of operation.
2. The caller can invoke a procedure on multiple processors. Supports
blocking and non-blocking modes of operation.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Building with python3.8 shows a warning like:
SyntaxWarning: invalid escape sequence \(
GuidName = re.compile("\(GUID=[-a-fA-F0-9]+")
It seems harmless, but it's easy enough to fix: mark the string as
raw with the 'r' prefix like is used elsewhere in the file
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Fixes and assert seen when running ls under the shell. It appears the
assert was added in:
commit 99849a906e
ShellPkg/ls: Display the file time in local time.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
ToolDefinitionFile is generated by PlatformAutoGen.ToolDefinition()
Code assume ToolDefinition is always called before using
ToolDefinitionFile, but in some cases, it's not true.
This patch is to fix this issue.
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The PL031 interrupt mask register (IMSC) is not very clearly documented
in the PL031 specification. However, bit 0 (RTCIMSC) indicates whether
interrupts are enabled, not disabled.
So before this commit, we were actually *enabling* interrupts for the RTC.
This patch changes the logic to instead disable interrupts when they
are not disabled already.
Signed-off-by: Alexander Graf <graf@amazon.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Per SDM, for IA-32e 4-KByte paging, there are four layers in the page
table structure:
1. PML4
2. Page-Directory-Pointer Table (PDPT)
3. Page-Directory (PD)
4. Page Table (PT)
The patch changes the local variable names and comments to use
"PML4", "PDPT", "PD", "PT" to better align to terms used in SDM.
There is no functionality impact for this change.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
This issue happens when using Structured PCD.
Build tool use set to store the cflags for compile PcdValueInit.c,
that is the order of cflags is disorder.
This patch make -U, /U flags appear before -D, /D
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Commit 3c59d94637 ("BaseTools/FCE: Add a tool FCE") added a new tool
that is always built. Pre-existing tools locate the makefile includes
with relative paths, but FCE uses EDK_TOOLS_PATH, adding a new dependency
on having sourced edksetup.sh before building BaseTools.
Change FCE GNUmakefile to match other tools.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(a) OvmfPkg first had to resolve the TpmMeasurementLib class -- for
SECURE_BOOT_ENABLE only -- when the DxeImageVerificationLib instance
became dependent on TpmMeasurementLib. For details, refer to commit
0d28d286bf ("OvmfPkg: resolve TpmMeasurementLib dependency
introduced in r14687", 2013-09-21).
(b) At the time, only one instance of TpmMeasurementLib existed, namely
DxeTpmMeasurementLib. This lib instance didn't do anything -- like it
was desirable for OVMF --, because OVMF didn't include any Tcg / TrEE
protocol implementations.
(c) In commit 308521b133 ("MdeModulePkg: Move TpmMeasurementLib
LibraryClass from SecurityPkg", 2015-07-01), TpmMeasurementLibNull was
introduced.
(d) In commit 285542ebbb ("OvmfPkg: Link AuthVariableLib for following
merged variable driver deploy", 2015-07-01), a TpmMeasurementLib
resolution became necessary regardless of SECURE_BOOT_ENABLE. And so
TpmMeasurementLib was resolved to TpmMeasurementLibNull in OVMF, but
only in the non-SECURE_BOOT_ENABLE case. This step -- possibly, the
larger series containing commit 285542ebbb -- missed an opportunity
for simplification: given (b), the DxeTpmMeasurementLib instance
should have been simply replaced with the TpmMeasurementLibNull
instance, regardless of SECURE_BOOT_ENABLE.
(e) In commit 1abfa4ce48 ("Add TPM2 support defined in trusted computing
group.", 2015-08-13), the TrEE dependency was replaced with a Tcg2
dependency in DxeTpmMeasurementLib.
(f) Starting with commit 0c0a50d6b3 ("OvmfPkg: include Tcg2Dxe module",
2018-03-09), OVMF would include a Tcg2 protocol implementation,
thereby satisfying DxeTpmMeasurementLib's dependency. With
TPM2_ENABLE, it would actually make sense to consume
DxeTpmMeasurementLib -- however, DxeTpmMeasurementLib would never be
used without SECURE_BOOT_ENABLE.
Therefore, we have the following four scenarios:
- TPM2_ENABLE + SECURE_BOOT_ENABLE: works as expected.
- Neither enabled: works as expected.
- Only TPM2_ENABLE: this build is currently incorrect, because
Variable/RuntimeDxe consumes TpmMeasurementLib directly, but
TpmMeasureAndLogData() will never reach the TPM because we link
TpmMeasurementLibNull into the variable driver. This is a problem from
the larger series containing (f).
- Only SECURE_BOOT_ENABLE: this build works as expected, but it is
wasteful -- given that the protocol database will never contain Tcg2
without TPM2_ENABLE, we should simply use TpmMeasurementLibNull. This is
a problem from (d).
Resolving TpmMeasurementLib to DxeTpmMeasurementLib as a function of
*only* TPM2_ENABLE, we can fix / optimize the last two cases.
v2:
- Amend the title and description suggested by Laszlo
- Move TpmMeasurementLib to the existed TPM2_ENABLE block
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Message-Id: <20190704040731.5303-1-glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
ArmVirtPkg was created before we introduced the Package Reviewer (R:)
role in Maintainers.txt. However, we have always had an informal
agreement that if Ard or Laszlo is absent, I can review patches by
the still present one for going into ArmVirtPkg.
Plus, as one of the ArmPkg maintainers, it makes sense for me to have
better visibility of goings-on in ArmVirtPkg.
So let's formalise that, and add myself as a Package Reviewer, to be
CC:d on patches (while not taking up full maintainer responsibilities).
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Make the -h command line option a binary flag. Now, colour
highlighting is enabled whenever this flag is set (stateless),
instead of being dependent on previous acpiview command
invocations.
By removing the parameter required with the -h flag the command
line parsing logic becomes simpler.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Remove redundant whitespace characters at the beginning of the strings
describing IORT table field names.
When dumping ACPI table contents, the indentation level for printing
field names is controled using the 'Indent' argument to the 'ParseAcpi'
function. In the IORT acpiview parser, both 'Indent' and extra
whitespace characters are used for indentation, which results in
excess indentation.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
According to the acpiview documentation, the -v flag enables verbose
output and it is set on default.
Moreover, the acpiview UEFI shell tool dumps the same output with
and without this flag set.
Therefore this patch removes the superfluous -v flag from allowed
command line parameters.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The current documentation for the acpiview UEFI shell tool states
that the '-c' flag enables consistency checks on ACPI table data.
However, these checks are enabled anyway by default.
This patch keeps ACPI table validation as a default option, but it
makes it possible to turn ACPI table validation off by setting the
newly-introduced '-q' flag. Consequently, the '-c' flag is removed.
The remaining code changes in this patch make a number of consistency
checks optional (but enabled by default):
1. ACPI table field offset mismatch.
2. ACPI table field validation functions provided in the ACPI_PARSER
arrays.
3. Table checksum computation.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Print an extra newline character at the end DBG2 table parsing in order
to make the output resemble the one for other ACPI table parsers.
With this change, there is now a blank line between the DBG2 table dump
and the 'Table Statistics' section.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Move printing double newline character ('\n\n') from the beginning of
ACPI table checksum validation message to the end of the raw binary
data dump.
This way acpiview table dump looks similar regardless of whether Table
Checksum is validated or not.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acpiview currently allows displaying help info by specifying both
-? and /? flags. This patch removes /? from valid command line
flags that can be passed to the acpiview tool, as this
flag is not used for such purpose in other UEFI shell commands.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Calling DisconnectController() on children isn't part of the job of
EFI_DRIVER_BINDING_PROTOCOL.Stop() as it only needs to deallocate
resources allocated in Start(). The disconnection will happen when
both DevicePath and XenBus protocols gets uninstalled.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20190701111403.7007-1-anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In XenBusDxe, the XenBusAddDevice() opens the gXenIoProtocolGuid on
behalf of child controllers. It is never closed and prevents us from
uninstalling the protocol.
Close it where we stop all the children in XenBusDxe->Stop().
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190701105012.25758-1-anthony.perard@citrix.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1678
Use the PcdPlatformRecoverySupport to control the function
of platform recovery in BDS.
First, set the variable's ("OsIndicationsSupported")
EFI_OS_INDICATIONS_START_PLATFORM_RECOVERY bit base on the pcd.
It would affect the variable "OsIndications".
While the platform does not support the platform recovery,
it is inappropriate to set a PlatformRecovery#### variable. So
skip setting the variable. But it should remain the behavior of
booting from a default file path (such as \EFI\BOOT\BOOTX64.EFI)
to be compatible with the previous version UEFI spec.
Add memory check before build platform default boot option. If
fail to allocate memory for the defualt boot file path, put the
system into dead loop to indicate it is unable to boot.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1882
Implement support for GetOperatingParamters notify phase
in SdMmcHcDxe driver. GetOperatingParameters notify phase
is signaled before we start card detection and initialization.
Code has been updated for both eMMC and SD card controllers to
take into consideration those new parameters. Initialization process
has been divided into 2 steps. In the first step we bring the link
up to the point where we can get card identification data(Extended
CSD in eMMC case and SWITCH command response in SD card case). This
data is later used along with controller capabilities and operating
parameters passed in GetOperatingParameters phase to choose preferred
bus settings in GetTargetBusSettings function. Those settings are later
on to start bus training to high speeds. If user passes incompatible
setting with selected bus timing driver will assume it's standard behavior
with respect to that setting. For instance if HS400 has been selected as a
target bus timing due to card and controller support bus width setting of
4 and 1 bit won't be respected and 8 bit setting will be chosen instead.
Tests on Marvell boards were also performed by Marcin Wojtas
<mw@semihalf.com>:
https://edk2.groups.io/g/devel/message/42999
Board 1 (out of tree): SD - OK, MMC - OK
Board 2: (Armada80x0McBin): SD - OK, MMC - OK
Board 3: (Armada70x0Db): SD - problems, MMC - OK
Please note that the problem on Armada70x0Db SD devices are introduced by
adding new types of SD bus modes, a subsequent patch within edk2-platforms
repository will be proposed to address it.
(More details can be referred from the above link.)
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Regression-tested-by: Sumit Garg <sumit.garg@linaro.org>
https://bugzilla.tianocore.org/show_bug.cgi?id=1882
The new notify phase allows platform to configure additional
bus parameters in addition to parameters that can already be configured
with capability override. Specifically we allow to configure bus width,
clock frequency and driver strength. If platform doesn't wish to configure
some of the parameters it can left it on default values and driver will
assume it's standard behavior with respect to those parameters.
The definition of the SD_MMC_BUS_MODE has been extended to
incorporate SD card default speed and high speed.
Tests on Marvell boards were also performed by Marcin Wojtas
<mw@semihalf.com>:
https://edk2.groups.io/g/devel/message/42999
Board 1 (out of tree): SD - OK, MMC - OK
Board 2: (Armada80x0McBin): SD - OK, MMC - OK
Board 3: (Armada70x0Db): SD - problems, MMC - OK
Please note that the problem on Armada70x0Db SD devices are introduced by
adding new types of SD bus modes, a subsequent patch within edk2-platforms
repository will be proposed to address it.
(More details can be referred from the above link.)
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Regression-tested-by: Sumit Garg <sumit.garg@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1341
Since UFS specification requires the data buffer specified
in PRDT to be DWORD aligned in size we had a code in
UfsInitUtpPrdt that aligned the data buffer by rounding down
the buffer size to DWORD boundary. This meant that for SCSI
commands that wanted to perform unaligned data transfer(such as
SENSE command) we specified to small buffer for the data to fit
and transfer was aborted. This change introduces code that allocates
auxiliary DWORD aligned data buffer for unaligned transfer. Device
transfers data to aligned buffer and when data transfer is over driver
copies data from aligned buffer to data buffer passed by user.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Port the [LibraryClasses], [PcdsFixedAtBuild] and [Components] settings
that are related to NETWORK_TLS_ENABLE from OvmfPkg to ArmVirtPkg.
ArmVirtXen is not modified because it doesn't include the edk2 network
stack.
(This change is now simpler than it would have been when TianoCore#1009
was originally filed, due to ArmVirtPkg consuming the NetworkPkg include
fragments meanwhile, from TianoCore#1293 / commit 157a3b1aa50f.)
The usage hints from "OvmfPkg/README", section "HTTPS Boot", apply.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Lin <glin@suse.com>
Cc: Guillaume GARDET <guillaume.gardet@arm.com>
Cc: Julien Grall <julien.grall@arm.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1009
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Guillaume Gardet <guillaume.gardet@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Tested-by: Gary Lin <glin@suse.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1834
1)Add arguments "--embedded-driver" to support embedded driver
in command line.
2)Add arguments "--update-image-index" to identify ImageIndex
within the device in command line.
3)Add arguments "-j JSONFILE" to support multiple payloads and
embedded drivers with JSON file.
The update is in a backwards compatible manner, so all command
line options to support single payload are still supported. But
all the options associated with multiple payloads should be
provided in a JSON file.
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Eric Jin <eric.jin@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1934
0x0 MicrocodeBegin MicrocodeEntry MicrocodeEnd 0xffffffff
|--------------|---------------|---------------|---------------|
valid TotalSize
TotalSize is only valid between 0 and (MicrocodeEnd - MicrocodeEntry).
So add '(UINTN)MicrocodeEntryPoint > (MAX_ADDRESS - TotalSize)' before
'((UINTN)MicrocodeEntryPoint + TotalSize) > MicrocodeEnd' to make sure
((UINTN)MicrocodeEntryPoint + TotalSize) wouldn't overflow.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
In current implementation we are checking for device presence every
time we execute UIC command. To make UfsExecUicCommands more generic
checking device presence has been moved to UfsDeviceDetection.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1844
The commit will remove the below modules from PcAtChipsetPkg:
* PcAtChipsetPkg/8259InterruptControllerDxe/8259.inf
* PcAtChipsetPkg/8254TimerDxe/8254Timer.inf
* PcAtChipsetPkg/IsaAcpiDxe/IsaAcpi.inf
They are considered legacy framework components and will no longer be used
after the removal of IntelFramework[Module]Pkg.
Also, the unused (after the modules being removed) PCDs will be deleted in
package level DEC/UNI files.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1617
This driver implements a common checker, verifier and reporter which is
independent of hardware based root-of-trust.
Usually the hardware based root-of-trust will not verify all BIOS but
part of it. For example, Boot Guard will only verify IBB segment. The IBB
needs to verify other part of BIOS, i.e. other FVs to transfer control to
from IBB. This driver plays the role in IBB to verify FVs not covered by
hardware root-of-trust to make sure integrity of the chain of trust.
To be hardware/platform independent, PPI
gEdkiiPeiFirmwareVolumeInfoStoredHashFvPpiGuid
is introduced for platform to pass digest information to this driver.
This PPI should include all information needed to verify required FVs in
required boot mode.
struct _EDKII_PEI_FIRMWARE_VOLUME_INFO_STORED_HASH_FV_PPI {
FV_HASH_INFO HashInfo;
UINTN FvNumber;
HASHED_FV_INFO FvInfo[1];
};
To avoid TOCTOU issue, all FVs to be verified will be copied to memory
before hash calculation. That also means this driver has to be run after
permanent memory has been discovered.
For a measured boot, this driver will install
gEdkiiPeiFirmwareVolumeInfoPrehashedFvPpiGuid
to report digest of each FV to TCG driver.
For a verified boot, this driver will verify the final hash value
(calculated from the concatenation of each FV's hash) for indicated
FVs against the hash got from platform/hardware.
If pass, it will build EFI_HOB_TYPE_FV (consumed by DXE core) and/or
install gEfiPeiFirmwareVolumeInfoPpiGuid (consumed by PEI core), and
then report status code PcdStatusCodeFvVerificationPass.
If fail, it just report status code PcdStatusCodeFvVerificationFail
and go to dead loop if status report returns.
The platform can register customized handler to process pass and fail
cases differently.
Currently, this driver only supports hash (sha256/384/512) verification
for the performance consideration.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: "Hernandez Beltran, Jorge" <jorge.hernandez.beltran@intel.com>
Cc: Harry Han <harry.han@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1617
gEdkiiPeiFirmwareVolumeInfoStoredHashFvPpiGuid should be installed by
platform to pass FV hash information to the common FV verify/report
driver, in which the hash value will be calculated again based on the
information fed in and then verified.
The information passed in this PPI include:
- FVs location in flash and length
- Hash values for different boot mode
The hash value must be calculated in following way (if 3 FVs to calc):
FV1 -> Hash1
FV2 -> Hash2
FV3 -> Hash3
Hash1 + Hash2 + Hash3 -> HashAll
Only HashAll is stored in this PPI. The purposes for this algorithm
are two:
1. To report each FV's hash to TCG driver and verify HashAll at the
same time without the burden to calculate the hash twice;
2. To save hash value storage due to potential hardware limitation
Different boot mode may have its own hash value so that each mode can
decide which FV will be verified. For example, for the sake of performance,
S3 may choose to skip some FVs verification and normal boot will verify
all FVs it concerns.
So in this PPI, each FV information has flag to indicate which boot mode
it will be taken into hash calculation.
And if multiple hash values passed in this PPI, each has a flag to indicate
which boot mode it's used for. Note one hash value supports more than one
boot modes if they're just the same.
PcdStatusCodeFvVerificationPass and PcdStatusCodeFvVerificationFail are
introduced to report status back to platform, and platform can choose how
to act upon verification success and failure.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: "Hernandez Beltran, Jorge" <jorge.hernandez.beltran@intel.com>
Cc: Harry Han <harry.han@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Mostly, this is only necessary for devices that the CSM might have
native support for, such as VirtIO and NVMe; PciBusDxe will already
degrade devices to 32-bit if they have an OpROM.
However, there doesn't seem to be a generic way of requesting PciBusDxe
to downgrade specific devices.
There's IncompatiblePciDeviceSupportProtocol but that doesn't provide
the PCI class information or a handle to the device itself, so there's
no simple way to just match on all NVMe devices, for example.
Just leave gUefiOvmfPkgTokenSpaceGuid.PcdPciMmio64Size set to zero for
CSM builds, until/unless that can be fixed.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190626113742.819933-5-dwmw2@infradead.org>
QemuVideoDxe installs its own legacy INT 10h handler for the benefit of
systems like Windows 2008r2 which attempt to use INT 10h even when booted
via EFI.
This interacts extremely badly with a CSM actually attempting to install
a real video BIOS.
The last thing done before invoking a legacy OpROM is to call INT 10h to
set a plain text mode. In the case where it's the video BIOS OpROM being
loaded, INT 10h will normally point to an iret stub in the CSM itself.
Unless QemuVideoDxe has changed INT10h to point to a location in the
0xC0000 segment that it didn't allocate properly, so the real OpROM has
been shadowed over them top of it, and the INT 10h vector now points to
some random place in the middle of the newly-shadowed OpROM.
Don't Do That Then. QemuVideoDxe doesn't do any acceleration and just
sets up a linear framebuffer, so we don't lose much by just
unconditionally using BiosVideoDxe instead when CSM is present.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190626113742.819933-4-dwmw2@infradead.org>
Iterate over the available block devices in much the same way as
BdsLibEnumerateAllBootOption() does, but limiting to those devices
which are PCI-backed, which can be represented in the BbsTable.
One day we might need to extend the BbsTable to allow us to distinguish
between different NVMe namespaces on a device.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190626113742.819933-3-dwmw2@infradead.org>
REF: https://github.com/tianocore/tianocore.github.io/wiki/
UEFI-Capsule-on-Disk-Introducation
CoDCheckCapsuleOnDiskFlag() is to check if CapsuleOnDisk flag in
"OsIndications" Variable is enabled. It is used to indicate whether
capsule on disk is provisioned in normal boot path.
CoDClearCapsuleOnDiskFlag() is to to clear CapsuleOnDisk flags,
including "OsIndications" and "BootNext" variable.
CoDRelocateCapsule() is to relocate the capsules from EFI system
partition. Depends on PcdCapsuleInRamSupport, there are two solutions
to relocate the capsule on disk images:
When Capsule In Ram is supported, the Capsule On Disk images are
relocated into memory, and call UpdateCapsule() service to deliver
the capsules.
When Capsule In Ram is not supported, the Capsule On Disk images are
relocated into a temp file which will be stored in root directory on
a platform specific storage device. CapsuleOnDiskLoadPei PEIM will
retrieve the capsules from the relocation temp file and report
capsule hobs for them.
CoDRemoveTempFile() is to remove the relocation temp file in the next
boot after capsules are processed.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://github.com/tianocore/tianocore.github.io/wiki/
UEFI-Capsule-on-Disk-Introducation
This patch will add Capsule On Disk related definition, including
GUID, PPI and PCDs:
The Capsule On Disk Name GUID indicates the capsule is to store
Capsule On Disk file names.
The Pei Capsule On Disk PPI provides service to retrieve capsules
from Capsule On Disk temp relocation file on mass storage devices
and create capsule hob for these capsules.
Pei Boot In CapsuleOnDisk Mode Ppi indicates current boot mode is
capsule on disk mode.
PcdCapsuleOnDiskSupport is used to enable/disable Capsule On Disk.
PcdCapsuleInRamSupport is used to enable/disable Capsule In Ram.
PcdCoDRelocationFileName specifies the Capsule On Disk temp
relocation file name.
PcdCodRelocationDevPath specifies platform specific device to store
Capsule On Disk temp relocation file.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1840
1. Introduce an internal header file to put definitions in it.
2. Add missing '\n' in usage.
3. Fix the dead loop of CapsuleApp -L.
4. Fix the bug that CapsuleApp -OD cannot perform capsules in sub-
folder.
5. Optimize the handling for option -NR and -OD to support both
'CapsuleApp <Capsule> -OD -NR' and 'CapsuleApp <Capsule> -NR -OD'.
6. Check if Capsule-On-Disk is supported by "OsIndicationsSupported"
variable firstly before processing capsules. If not supported, prompt
an error message and quit the process.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1879
This commit will add the definitions of Nvm Express PassThru PPI.
This PPI will provide services that allow NVM commands to be sent
to NVM Express devices during PEI phase.
More specifically, the PPI will provide services to:
* Sends an NVM Express Command Packet to an NVM Express controller
or namespace (by service 'PassThru');
* Get the list of the attached namespaces on a controller
(by services 'GetNextNameSpace');
* Get the identification information (DevicePath) of the underlying
NVM Express host controller (by service 'GetDevicePath').
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Re-run process_files.py to generate OpensslLib[Crypto].inf.
CryptoPkg/Library/Include/openssl/opensslconf.h is coped from OpenSSL,
So keep the CR/LF style like OpenSSL source file.
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Xiaoyu Lu <xiaoyux.lu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
https://github.com/tianocore/tianocore.github.io/wiki/UEFI-Capsule-
on-Disk-Introducation
CoDCheckCapsuleOnDiskFlag() is to check if CapsuleOnDisk flag in
"OsIndications" Variable is enabled. It is used to indicate whether
capsule on disk is provisioned in normal boot path.
CoDClearCapsuleOnDiskFlag() is to to clear CapsuleOnDisk flags,
including "OsIndications" and "BootNext" variable.
CoDRelocateCapsule() is to relocate the capsules from EFI system
partition. Depends on PcdCapsuleInRamSupport, there are two solutions
to relocate the capsule on disk images:
When Capsule In Ram is supported, the Capsule On Disk images are
relocated into memory, and call UpdateCapsule() service to deliver
the capsules.
When Capsule In Ram is not supported, the Capsule On Disk images are
relocated into a temp file which will be stored in root directory on
a platform specific storage device. CapsuleOnDiskLoadPei PEIM will
retrieve the capsules from the relocation temp file and report
capsule hobs for them.
CoDRemoveTempFile() is to remove the relocation temp file in the next
boot after capsules are processed.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1840
1. Add missing '\n' in usage.
2. Fix the dead loop of CapsuleApp -L.
3. Fix the bug that CapsuleApp -OD cannot perform capsules in sub-
folder.
4. Optimize the handling for option -NR and -OD to support both
'CapsuleApp <Capsule> -OD -NR' and 'CapsuleApp <Capsule> -NR -OD'.
5. Check if Capsule-On-Disk is supported by "OsIndicationsSupported"
variable firstly before processing capsules. If not supported, prompt
an error message and quit the process.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
https://github.com/tianocore/tianocore.github.io/wiki/UEFI-Capsule-
on-Disk-Introducation
This patch will add Capsule On Disk related definition, including
GUID, PPI and PCDs:
The Capsule On Disk Name GUID indicates the capsule is to store
Capsule On Disk file names.
The Pei Capsule On Disk PPI provides service to retrieve capsules
from Capsule On Disk temp relocation file on mass storage devices
and create capsule hob for these capsules.
Pei Boot In CapsuleOnDisk Mode Ppi indicates current boot mode is
capsule on disk mode.
PcdCapsuleOnDiskSupport is used to enable/disable Capsule On Disk.
PcdCapsuleInRamSupport is used to enable/disable Capsule In Ram.
PcdCoDRelocationFileName specifies the Capsule On Disk temp
relocation file name.
PcdCodRelocationDevPath specifies platform specific device to store
Capsule On Disk temp relocation file.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
The ACPI 6.3 specification introduces a 'SPE overflow
Interrupt' field as part of the GICC structure.
Update the MADT parser to decode this field and validate
the interrupt ID used.
References:
- ACPI 6.3 Specification - January 2019
- Arm Generic Interrupt Controller Architecture Specification,
GIC architecture version 3 and version 4, issue E
- Arm Server Base System Architecture 5.0
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The comments describes the device as being 32-bit:
"the maximum time span is just over 136 years"
then uses a UINTN to hold the value.
Change to UINT32 so we don't get different behaviour for different architectures.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1894
Basetool need a CopyFileOnChange() function to avoid cache
file writing race in multi-thread build. Some platforms
build fail with file IO writing race issue when the
build cache is enabled to store cache files in multi-threads.
This is because common same library cache files (e.g. some
libs in MdePkg) can be stored by many different driver modules'
build threads at same time. Current build cache need a function
to check whether the same cache file already exist, and only
copy source file if it is different from the destination file.
This patch introduces an atomic copy function to avoid duplicated
cache files copy.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Christian Rodriguez <christian.rodriguez@intel.com>
Signed-off-by: Steven Shi <steven.shi@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1895
Build cache cannot store cache for the same library modules
in different arch together. E.g. Both the below IA32 and X64
arch BaseLib caches should exist after build Ovmf3264, but now
only the one in X64 arch exist.
The reason is the current Basetool use a set() to same all
library AutoGen objects, but the different arch lib AutoGen
objects have same __hash_ value which comes from the lib
MetaFile(The path of module file):
def __hash__(self):
return hash(self.MetaFile)
So the different arch lib AutoGen objects are duplicated one
to the set() and only one can exist. This is why the Basetool
can only store one arch cache for library.
This patch adds the arch string into the PlatformAutoGen and
ModuleAutoGen __hash_ definitions and ensure the different
platform and module AutoGen objects have different __hash_ values.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Christian Rodriguez <christian.rodriguez@intel.com>
Signed-off-by: Steven Shi <steven.shi@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1867
Current build cache cannot store the cache for library package.
build -p MdePkg\MdePkg.dsc -a IA32 -b DEBUG -t VS2015x86 --hash
--binary-destination=BinCache
After build, the expected result is the BinCache folder is generated
and the MdePkg build cache files (e.g. .hash and .lib) are stored in
the BinCache folder. But the BinCache folder is not generated at all.
This patch is going to fix that issue.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Zhiju.Fan <zhijux.fan@intel.com>
Signed-off-by: Steven Shi <steven.shi@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
SERIAL_DXE_FILE_GUID is now defined in MdeModulePkg as
EDKII_SERIAL_PORT_LIB_VENDOR_GUID, simply use it.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20190606131459.1464-3-anthony.perard@citrix.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[lersek@redhat.com: drop "from MdeModulePkg" from the subject]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
The DX register is supposed to contain the required alignment for the
allocation. It was zero, and SeaBIOS doesn't (well, didn't) cope well
with that. Set it appropriately.
Also set BX to indicate the regions it's OK to allocate in too. That
wasn't being initialised and was just using whatever the previous user
of the structure had left there.
Finally, actually return an error if the allocation fails. Instead of
going all the way through into the CSM and just letting it have a bogus
pointer to the E820 data.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1811
This commit will update the driver's INF file to:
A) Assign a new file GUID;
B) Consume the PCDs duplicated in OvmfPkg DEC file;
C) Remove the IntelFramework[Module]Pkg DEC file dependency.
Please note that a subsequent commit (final patch of the series) will:
Replace the use of LegacyBiosDxe in IntelFrameworkModulePkg with the one
copied in OvmfPkg within DSC/FDF files.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1811
This commit will update the driver's INF file to:
A) Assign a new file GUID;
B) Consume the PCDs duplicated in OvmfPkg DEC file;
C) Remove the IntelFramework[Module]Pkg DEC file dependency.
Please note that a subsequent commit (final patch of the series) will:
Replace the use of VideoDxe in IntelFrameworkModulePkg with the one copied
in OvmfPkg within DSC/FDF files.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1811
This commit will add the PCD definitions consumed by the duplicated
drivers:
* VideoDxe
* LegacyBiosDxe
into the OvmfPkg DEC file.
Please note that, instead of adding these PCDs under section:
[PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx, PcdsPatchableInModule]
as in IntelFrameworkModulePkg.dec file, they are added in section:
[PcdsFixedAtBuild]
in OvmfPkg.dec instead.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1412
Original logic:
Connect the graphics device -> connect it as graphics consoles
and initialize its parameters(Mode = -1, invalid) -> connect it
as console spliter and add the device to the list(use SetMode to
set mode to the user defined mode or the best mode the devices
supported if the mode is invalid. *clear the screen at this phase*)
Changed logic:
Connect the graphics device -> connect it as graphics consoles
and initialize its parameters(initialize the mode to the user
defined mode or the best mode. *directly set the mode value without
using SetMode, that would not clear the screen) -> connect it as
console spliter and add the device to the list(use SetMode to set
mode to the user defined mode or the best mode the devices supported
if the mode is invalid. *now the mode is already set, so it would
not clear the screen*).
Also remove the section of SetMode for debug version.
Impact: as the text mode may not be an invalid value, the SetMode
may have no chance to be called during reconnect the graphics device.
That means the screen may not be cleaned after finishing reconnect
operation. There is one common condition: shell command "recoonect -r".
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Before adding the git environment initialization script, add the
following files that will be pointed to after running said script:
- BaseTools/Conf/diff.order
- BaseTools/Conf/gitattributes
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
When assigning a physical PCIe device to a QEMU/KVM guest, PciBusDxe may
find that the extended config space is not (fully) implemented. In
LocatePciExpressCapabilityRegBlock(), "CapabilityEntry" may be read as
0xFFFF_FFFF at a given config space offset, after which the loop gets
stuck spinning on offset 0xFFC (the read at offset 0xFFC returns
0xFFFF_FFFF most likely as well).
Another scenario (not related to virtualization) for triggering the above
is when a Conventional PCI bus -- exposed by a PCIe-to-PCI bridge in the
topology -- intervenes between a PCI Express Root Port and a PCI Express
Endpoint. The Conventional PCI bus limits the accessible config space of
the PCI Express Endpoint, even though the endpoint advertizes the PCI
Express capability. Here's a diagram, courtesy of Alex Williamson:
[PCIe Root Port]--[PCIe-to-PCI]--[PCI-to-PCIe]--[PCIe EP]
->| |<- Conventional PCI bus
Catch reads of 0xFFFF_FFFF in LocatePciExpressCapabilityRegBlock(), and
break out of the scan with a warning message. The function will return
EFI_NOT_FOUND.
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Changed the line endings to DOS line endings for
DynamicTablesPkg/DynamicTablesPkg.dsc
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The ACPI 6.3 specification adds support for describing
ARMv8.1 EL2 virtual timers. Update GTDT Generator
to extend this support.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The PPTT generator uses the configuration manager protocol to
obtain information about platform's processor topology and caches.
This data is then used to generate the PPTT table.
The table generator supports ACPI 6.3, PPTT table revision 2.
The dynamic PPTT generator also carries out extensive input
validation which includes cycle detection and MADT-PPTT
cross-validation. A number of architectural compliance checks
are also performed.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1842
According to the discussion at:
https://edk2.groups.io/g/devel/topic/30918343#38093
For OVMF, we keep both ISA stacks:
* The legacy one in PcAtChipsetPkg/IntelFrameworkModulePkg
* The Sio bus based OVMF-specified one introduced by commit a5cc178aeb
for a period of time (includes 1 stable tag: edk2-stable201905). And we
also keep the Sio bus based OVMF-specified stack as the default one (via a
build option 'USE_LEGACY_ISA_STACK') to validate its stability.
This commit will propose to drop the legacy ISA stack from OVMF and remove
the usage of the build flag 'USE_LEGACY_ISA_STACK' at the same time. This
is considered as a preparation for the removal of
PcAtChipsetPkg/IsaAcpiDxe & IntelFrameworkModulePkg.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The Dynamic Tables Framework now supports generating Multiple APIC
Description Table (MADT) revision 5 for ARM platforms while maintaining
backward-compatibility with ACPI 6.2.
The relevant change is the enablement of the Statistical Profiling
Extension (SPE).
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Check for duplicate frame numbers when populating the GT Block Timer
Frames inside the GTDT table generator.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Check for duplicate ACPI Processor UIDs when populating the GIC CPU
(GICC) Interface structures inside the MADT table generator.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Added generic function for detecting duplicate values in an array.
Also defined a function prototype to test if two objects are equal.
The prototype is used as an argument to the 'FindDuplicateValues'
function.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Added code to check if the Generic Timer Block Structure's frame number
provided by the platform repository is within the allowed range (0-7).
References:
- ACPI 6.2 Errata A, Table 5-122, September 2017
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The ACPI 6.3 specification introduces support to describe
the ARMv8.1 virtual EL2 timers. This patch updates the GTDT parser
of acpiview to decode the EL2 virtual timer fields.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1765
If RAW FFS File Rule has no section for its data.For RAW FFS File,
directly call GenFfs tool to generate FFS file.
Ffs Rule:
[Rule.Common.USER_DEFINED.MicroCode]
FILE RAW = $(NAMED_GUID) {
$(INF_OUTPUT)/$(MODULE_NAME).bin
}
[Rule.Common.USER_DEFINED.LOGO]
FILE RAW = $(NAMED_GUID) {
|.bmp
}
As shown in the rule above,if SectionType and FileType not defined,
FFS files are generated directly, and no other type of file is
generated.
The patch is to make the BaseTools support these two rules
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The patch fixes the bug that the memory under 1MB is modified by
firmware in S3 boot.
Root cause is a racing condition in MpInitLib:
1. BSP: WakeUpByInitSipiSipi is set by NotifyOnS3SmmInitDonePpi()
2. BSP: WakeUpAP() wakes all APs to run certain procedure.
2.1. AllocateResetVector() uses <1MB memory for wake up vector.
2.1. FillExchangeInfoData() resets NumApsExecuting to 0.
2.2. WaitApWakeup() waits AP to clear WAKEUP_AP_SIGNAL.
3. AP: ApWakeupFunction() clears WAKEUP_AP_SIGNAL to inform BSP.
5. BSP: FreeResetVector() restores the <1MB memory
4. AP: ApWakeupFunction() calls the certain procedure.
4.1. NumApsExecuting is decreased.
#4.1 happens after the 1MB memory is restored so the result is
memory below 1MB is changed by #4.1
It happens only when the AP executes procedure a bit longer.
AP returns back to ApWakeupFunction() from procedure after
BSP restores the <1MB memory.
Since NumApsExecuting is only used when InitFlag == ApInitConfig
for counting the processor count.
The patch moves the NumApsExecuting decrease to the path when
InitFlag == ApInitConfig.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Nandagopal Sathyanarayanan <nandagopal.sathyanarayanan@intel.com>
NumApsExecuting is only used when InitFlag == ApInitConfig for
counting the processor count.
The patch changes Ia32 version of waking up vector assembly code
to align to x64 version of waking up vector assembly code.
After the change both versions of waking up vector increase
NumApsExecuting when InitFlag == ApInitConfig.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1810
This patch covers two problems.
1. Current code gets CPUID_THERMAL_POWER_MANAGEMENT in
ClockModulationInitialize() and uses its ECMD bit for all processors.
But ClockModulationInitialize() is only executed by BSP, that means
the bit is just for BSP.
It may have no functionality issue as all processors may have same
bit value in a great possibility. But for good practice, the code
should get CPUID_THERMAL_POWER_MANAGEMENT in ClockModulationSupport
(executed by all processors), and then use them in
ClockModulationInitialize() for all processors.
We can see that Aesni.c (and others) have used this good practice.
2. Current code uses 3 CPU_REGISTER_TABLE_WRITE_FIELD for
MSR_IA32_CLOCK_MODULATION in ClockModulationInitialize(), they can
be reduced to 1 CPU_REGISTER_TABLE_WRITE64 by getting
MSR_IA32_CLOCK_MODULATION for all processors in
ClockModulationSupport() and then update fields for register table
write in ClockModulationInitialize().
We may argue that there may be more times of MSR_IA32_CLOCK_MODULATION
getting. But actually the times of MSR_IA32_CLOCK_MODULATION getting
could be also reduced.
The reason is in ProgramProcessorRegister() of CpuFeaturesInitialize.c,
AsmMsrBitFieldWrite64 (AsmReadMsr64 + AsmWriteMsr64) will be used for
CPU_REGISTER_TABLE_WRITE_FIELD, and AsmWriteMsr64 will be used for
CPU_REGISTER_TABLE_WRITE64.
The times of MSR accessing could be reduced with this patch.
Without the patch:
3 CPU_REGISTER_TABLE_WRITE_FIELD (in ClockModulationInitialize)
==> 3 AsmMsrBitFieldWrite64
==> 3 AsmReadMsr64 + 3 AsmWriteMsr64
With the patch:
1 AsmReadMsr64 (in ClockModulationSupport) +
1 CPU_REGISTER_TABLE_WRITE64 (in ClockModulationInitialize)
==> 1 AsmWriteMsr64
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Cc: Kevin Li <kevin.y.li@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1829
There will be ASSERT if LMCE is supported as below.
DXE_ASSERT!: [CpuFeaturesDxe]
XXX\UefiCpuPkg\Library\CpuCommonFeaturesLib\MachineCheck.c (342):
ConfigData != ((void *) 0)
The code should get Config Data and FeatureControlGetConfigData
could be used.
This issue is there since the code was added at the commit below.
Revision: 3d6275c113
Date: 2017/8/4 8:46:41
UefiCpuPkg CpuCommonFeaturesLib: Enable LMCE feature.
The commits below are also related to move the code.
Revision: 0233871442
Date: 2017/9/1 10:12:38
UefiCpuPkg/Lmce.c Remove useless file.
Revision: 306a5bcc6b
Date: 2017/8/17 11:40:38
UefiCpuPkg/CpuCommonFeaturesLib: Merge machine check code to same file.
So, the code may not be tested at all on a platform
that supports LMCE.
BTW: A typo in LmceInitialize is also fixed.
The typo is introduced by the commit below.
Revision: d28daaddb3
Date: 2018/10/17 9:24:05
UefiCpuPkg/CpuCommonFeaturesLib: Register MSR base on scope Info.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Cc: Kevin Li <kevin.y.li@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1808
In current code, the values of TopaEntryPtr->Uint64 for TopaTable
and the values of OutputBaseReg.Uint64 and OutputMaskPtrsReg.Uint64
to register table write for RTIT_OUTPUT_BASE and RTIT_OUTPUT_MASK_PTRS
are not been initialized in whole. For example, the reserved bits in
OutputBaseReg.Uint64 are random that will cause GP fault like below
when SetProcessorRegister (in CpuFeaturesInitialize.c) sets register
based on register table.
!!!! X64 Exception Type - 0D(#GP - General Protection)
CPU Apic ID - 00000000 !!!!
ExceptionData - 0000000000000000
RIP -0000000064D69576, CS -0000000000000038, RFLAGS -0000000000010246
RAX -000000006B9F1001, RCX -0000000000000560, RDX -0000000000000000
RBX -0000000064EECA18, RSP -000000006CB82BA0, RBP -0000000000000008
RSI -0000000080000000, RDI -0000000000000011
R8 -000000006B9493D0, R9 -0000000000000010, R10 -00000000000000FF
R11 -000000006CB82A50, R12 -0000000064D70F50, R13 -0000000066547050
R14 -0000000064E3E198, R15 -0000000000000000
DS -0000000000000030, ES -0000000000000030, FS -0000000000000030
GS -0000000000000030, SS -0000000000000030
CR0 -0000000080010013, CR2 -0000000000000000, CR3 -000000006C601000
CR4 -0000000000000628, CR8 -0000000000000000
DR0 -0000000000000000, DR1 -0000000000000000, DR2 -0000000000000000
DR3 -0000000000000000, DR6 -00000000FFFF0FF0, DR7 -0000000000000400
GDTR -000000006B8CCF18 0000000000000047, LDTR -0000000000000000
IDTR -000000006687E018 0000000000000FFF, TR -0000000000000000
FXSAVE_STATE -000000006CB82800
And current code gets MSR_IA32_RTIT_CTL, MSR_IA32_RTIT_OUTPUT_BASE and
MSR_IA32_RTIT_OUTPUT_MASK_PTRS in ProcTraceInitialize() and uses their
values for all processors. But ProcTraceInitialize() is only executed
by BSP, that means the values just for BSP. For good practice, the code
should get MSR_IA32_RTIT_CTL, MSR_IA32_RTIT_OUTPUT_BASE and
MSR_IA32_RTIT_OUTPUT_MASK_PTRS in ProcTraceSupport (executed by all
processors), and then use them in ProcTraceInitialize() for all
processors. This can also resolve the issue that the values of
OutputBaseReg.Uint64 and OutputMaskPtrsReg.Uint64 are not been
initialized in whole.
For TopaEntryPtr->Uint64, this patch updates code to initialize it
in whole explicitly by TopaEntryPtr->Uint64 = 0 before updating its
fields.
At the same time, this patch also eliminates the ProcTraceSupported
field in PROC_TRACE_PROCESSOR_DATA and the TopaMemArrayCount field in
PROC_TRACE_DATA.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Cc: Kevin Li <kevin.y.li@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The status code reporting functionality in PrePiLib is never invoked
so let's just remove it.
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Query the supported attributes firstly, then bitwise AND (&) both VGA_IO
and VGA_IO_16. Since the supported attributes should only have one of
VGA_IO or VGA_IO_16 set, the result of bitwise AND (&) is either VGA_IO
or IO_16. Then the result can be passed to PciIo->Attributes() to set the
attributes.
Device driver should consider both since the mReserveVgaAliases in
PciBusDxe driver is default FALSE(implies that device driver can only set
VGA_IO_16 to PCI_ROOT_BRIDGE), and Platform code may not return
EFI_RESERVE_VGA_IO_ALIAS in GetPlatformPolicy of PciPlatformProtocol to
make mReserveVgaAliases become TRUE(implies that device driver can only
set VGA_IO to PCI_ROOT_BRIDGE), Currently OvmfPkg doesn't have problem
due to it has hard code value for PCI_ROOT_BRIDGE's attributes field, so
an IO access by PciIoProtocol will be successed due to
RootBridgeIoCheckParameter of PciRootBridgeIo.c will always get pass
result for legacy IO access.
Usually the attributes field of PCI_ROOT_BRIDGE should be 0, in that case
it will have issue since the VGA_IO may not be able to be enabled, then
IO access by PciIoProtocol will be failed, hence the QemuVideoDxe driver
will not work fine.
Signed-off-by: Marc Chen <marc.w.chen@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@arm.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Stefan Berger <stefanb@linux.ibm.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1880
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190606074237.81492-1-marc.w.chen@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
CryptoPkg\Library\Include\CrtLibSupport.h maps strxxxx interfaces to
edk2 PrintLib interfaces but related module inf file don't claim the
use of it. This will cause unresolved symbol issue with VS2017 build
which has enabled strict symbol check. This patch resolves the problem
by adding PrintLib to inf files.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When use clang-3.8 to build the NetworkPkg, compiler optimization
may use memcpy for memory copy. For example:
CryptoPkg/Library/OpensslLib/openssl/ssl/ssl_rsa.c:918: undefined
reference to `memcpy'`
Compiler optimization is sophisticated, but we can work around it
use __attribute__((__used__)) to informs the compiler that symbol
should be retained in the object file, even if it may be
unreferenced.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Xiaoyu Lu <xiaoyux.lu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Update the list of additional licenses in Readme.md. For additional
licenses from a git submodule, provide a link to the license file
in the remote git repository. This makes the links in Readme.md
when viewed from the edk2 repository GitHub landing page
https://github.com/tianocore/edk2/ functional from a web browser.
* Remove references EdkCompatibilityPkg
* Update link to OpenSSL to license file in the git submodule link
to https://github.com/openssl/openssl
* Add link to license file in the git submodule like to
https://github.com/ucb-bar/berkeley-softfloat-3 for
ArmSoftFloatLib
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1878
This issue is specific to VS2017 which tries to resolve symbol referenced
by a symbol not really referenced eventually.
ossl_init_load_crypto_strings
-> err_load_crypto_strings_int (not really referenced)
-> ERR_load_OSSL_STORE_strings
Because OPENSSL_NO_ERR and OPENSSL_NO_AUTOERRINIT are not defined by
default, err_load_crypto_strings_int() will not be actually referenced
by ossl_init_load_crypto_strings().
Since err_load_crypto_strings_int() is not actually referenced at all,
the fix can be done simply by removing crypto/err/err_all.c from build.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1089
When building CryptoPkg with XCODE, blow error may result
* usr/lib/clang/9.0.0/include/stdatomic.h:105:17:
error: unknown type name 'wchar_t'
Since the C native atomics are C11 feature we can explicitly
use C99 to work around it.
add -std=c99 to avoid it
* openssl/crypto/conf/conf_sap.c:71:12: error: variable 'ret' is
uninitialized
when used here [-Werror,-Wuninitialized]
Suppress warnings in OpenSSL so we don't break the build with -Werror.
add -Wno-error=uninitialized to disalbe this warning
Cc: Jian Wang <jian.j.wang@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Signed-off-by: Xiaoyu Lu <xiaoyux.lu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
(This is a replacement for commit 39b9a5ffe6 ("OvmfPkg/PlatformPei: fix
MTRR for low-RAM sizes that have many bits clear", 2019-05-16).)
Reintroduce the same logic as seen in commit 39b9a5ffe6 for the pc
(i440fx) board type.
For q35, the same approach doesn't work any longer, given that (a) we'd
like to keep the PCIEXBAR in the platform DSC a fixed-at-build PCD, and
(b) QEMU expects the PCIEXBAR to reside at a lower address than the 32-bit
PCI MMIO aperture.
Therefore, introduce a helper function for determining the 32-bit
"uncacheable" (MMIO) area base address:
- On q35, this function behaves statically. Furthermore, the MTRR setup
exploits that the range [0xB000_0000, 0xFFFF_FFFF] can be marked UC with
just two variable MTRRs (one at 0xB000_0000 (size 256MB), another at
0xC000_0000 (size 1GB)).
- On pc (i440fx), the function behaves dynamically, implementing the same
logic as commit 39b9a5ffe6 did. The PciBase value is adjusted to the
value calculated, similarly to commit 39b9a5ffe6. A further
simplification is that we show that the UC32 area size truncation to a
whole power of two automatically guarantees a >=2GB base address.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1859
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
(This is a replacement for commit 75136b2954, "OvmfPkg/PlatformPei:
reorder the 32-bit PCI window vs. the PCIEXBAR on q35", 2019-05-16).
Commit 7b8fe63561 ("OvmfPkg: PlatformPei: enable PCIEXBAR (aka MMCONFIG
/ ECAM) on Q35", 2016-03-10) claimed that,
On Q35 machine types that QEMU intends to support in the long term, QEMU
never lets the RAM below 4 GB exceed 2 GB.
Alas, this statement came from a misunderstanding that occurred while we
worked out the interface contract. In fact QEMU does allow the 32-bit RAM
extend up to 0xB000_0000 (exclusive), in case the RAM size falls in the
range (0x8000_0000, 0xB000_0000) (i.e., the RAM size is greater than
2048MB and smaller than 2816MB).
In turn, such a RAM size (justifiedly) triggers
ASSERT (TopOfLowRam <= PciExBarBase);
in MemMapInitialization(), because we placed the 256MB PCIEXBAR at
0x8000_0000 (2GB) exactly, relying on the interface contract. (And, the
32-bit PCI window would follow the PCIEXBAR, covering the [0x9000_0000,
0xFC00_0000) range.)
In order to fix this, place the PCIEXBAR at 2816MB (0xB000_0000), and
start the 32-bit PCI window at 3 GB (0xC000_0000). This shrinks the 32-bit
PCI window to
0xFC00_0000 - 0xC000_0000 = 0x3C00_0000 = 960 MB.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1859
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This reverts commit 60e95bf509.
The original fix for <https://bugzilla.tianocore.org/show_bug.cgi?id=1814>
triggered a bug / incorrect assumption in QEMU.
QEMU assumes that the PCIEXBAR is below the 32-bit PCI window, not above
it. When the firmware doesn't satisfy this assumption, QEMU generates an
\_SB.PCI0._CRS object in the ACPI DSDT that does not reflect the
firmware's 32-bit MMIO BAR assignments. This causes OSes to re-assign
32-bit MMIO BARs.
Working around the problem in the firmware looks less problematic than
fixing QEMU. Revert the original changes first, before implementing an
alternative fix.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1859
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
This reverts commit 9a2e8d7c65.
The original fix for <https://bugzilla.tianocore.org/show_bug.cgi?id=1814>
triggered a bug / incorrect assumption in QEMU.
QEMU assumes that the PCIEXBAR is below the 32-bit PCI window, not above
it. When the firmware doesn't satisfy this assumption, QEMU generates an
\_SB.PCI0._CRS object in the ACPI DSDT that does not reflect the
firmware's 32-bit MMIO BAR assignments. This causes OSes to re-assign
32-bit MMIO BARs.
Working around the problem in the firmware looks less problematic than
fixing QEMU. Revert the original changes first, before implementing an
alternative fix.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1859
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This reverts commit 75136b2954.
The original fix for <https://bugzilla.tianocore.org/show_bug.cgi?id=1814>
triggered a bug / incorrect assumption in QEMU.
QEMU assumes that the PCIEXBAR is below the 32-bit PCI window, not above
it. When the firmware doesn't satisfy this assumption, QEMU generates an
\_SB.PCI0._CRS object in the ACPI DSDT that does not reflect the
firmware's 32-bit MMIO BAR assignments. This causes OSes to re-assign
32-bit MMIO BARs.
Working around the problem in the firmware looks less problematic than
fixing QEMU. Revert the original changes first, before implementing an
alternative fix.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1859
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This reverts commit 39b9a5ffe6.
The original fix for <https://bugzilla.tianocore.org/show_bug.cgi?id=1814>
triggered a bug / incorrect assumption in QEMU.
QEMU assumes that the PCIEXBAR is below the 32-bit PCI window, not above
it. When the firmware doesn't satisfy this assumption, QEMU generates an
\_SB.PCI0._CRS object in the ACPI DSDT that does not reflect the
firmware's 32-bit MMIO BAR assignments. This causes OSes to re-assign
32-bit MMIO BARs.
Working around the problem in the firmware looks less problematic than
fixing QEMU. Revert the original changes first, before implementing an
alternative fix.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1859
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Commit c51f8bae7c ("CryptoPkg: Fix possible build problem with
Clang") added -std=c99 to the CLANG38 compiler command line of
packages that incorporate parts of OpenSSL, to ensure that the new
C atomics code used by OpenSSL for refcounting (which we don't care
about) does not pull in system C library headers, which we cannot
rely on when (cross)building EDK2 code.
Unsurprisingly, CLANG35 (which is only defined for ARM and AARCH64)
suffers from the exact same issue, so let's add the same flags
there as well.
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1089
* Update OpenSSL submodule to OpenSSL_1_1_1b
OpenSSL_1_1_1b(50eaac9f3337667259de725451f201e784599687)
* Run process_files.pl script to regenerate OpensslLib[Crypto].inf
and opensslconf.h
* Remove -DNO_SYSLOG from OPENSSL_FLAGS in OpensslLib[Crypto].inf,
due to upstream OpenSSL commit cff55b90e95e("Cleaning UEFI
Build with additional OPENSSL_SYS_UEFI flags", 2017-03-29),
which was first released as part of OpenSSL_1_1_1.
* Starting with OpenSSL commit 8a8d9e1905(first release in
OpenSSL_1_1_1), the OpenSSL_version() function can no longer
return a pointer to the string literal "compiler: information
not available", in the case CFLAGS macro is not defined.
Instead, the function now has a hard dependency on the global
variable 'compiler_flags'. This variable is normally placed
by "util/mkbuildinf.pl" into "buildinf.h". In edk2 we don't
run that script whenever we build OpenSSL, therefore we
must provide our own dummy 'compiler_flags'.
* BUFSIZ is used by crypto/evp/evp_key.c(OpenSSL_1_1_1b)
And it is declared in stdio.h. So add it to CrtLibSupport.h.
Here's a discussion about this.
Ref: https://github.com/openssl/openssl/issues/8904
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Signed-off-by: Xiaoyu Lu <xiaoyux.lu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1089
* From OpenSSL_1_1_0i(97c0959f27b294fe1eb10b547145ebef2524b896) to
OpenSSL_1_1_1b(50eaac9f3337667259de725451f201e784599687), OpenSSL
updated DRBG / RAND to request nonce and additional low entropy
randomness from system(line 229 openssl/CHANGES).
Since OpenSSL_1_1_1b doesn't fully implement rand pool functions
for UEFI. We must provide a method to implenet these method.
TSC is used as first entropy source if it's availabe otherwise
fallback to TimerLib. But we are not sure the amount of randomness
they provide. If you really care about the security, one choice is
overrided it with hardware generator.
Add rand_pool.c to implement these functions required by OpenSSL
rand_pool_acquire_entropy
rand_pool_add_nonce_data
rand_pool_add_additional_data
rand_pool_init
rand_pool_cleanup
rand_pool_keep_random_devices_open
And add rand_pool_noise.* for getting entropy noise from different
architecture.
* We don't need ossl_store functions. We exclude relative files
through process_files.pl. And ossl_store_cleanup_int was first
added in crypto/init.c OpenSSL_1_1_1(71a5516d).
So add a new file(ossl_store.c) to implement ossl_store_cleanup_int
function.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Signed-off-by: Xiaoyu Lu <xiaoyux.lu@intel.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1089
When building CryptoPkg with Clang, blow error may result
* /usr/lib/llvm-3.8/lib/clang/3.8.0/include/stdatomic.h:105:17: error:
unknown type name 'wchar_t'
Since the C native atomics are C11 feature we can explicitly
use C99 to work around it.
add -std=c99 to avoid it
* openssl/crypto/conf/conf_sap.c:71:12: error: variable 'ret' is
uninitialized
when used here [-Werror,-Wuninitialized]
Suppress warnings in OpenSSL so we don't break the build with -Werror.
add -Wno-error=uninitialized to disalbe this warning
Cc: Ting Ye <ting.ye@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Xiaoyu Lu <xiaoyux.lu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1089
Disable warning for building OpenSSL_1_1_1b
add /wd4132 /wd4700 /wd4310 for Visual Studio in OpensslLib[Crypto].inf
add -Wno-error=unused-but-set-variable for GCC in OpensslLib[Crypto].inf
Although this option is set in some build environments by default.
But this is only for OpenSSL compilation, no matter how the
default options change.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Signed-off-by: Xiaoyu Lu <xiaoyux.lu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1089
When running process_files.py to configure OpenSSL, we can exclude
some unnecessary files. This can reduce porting time, compiling
time and library size.
Upstream OpenSSL commit 71a5516dcc8a which was as part of
OpenSSL_1_1_1b, Add the STORE module(crypto/store/*).
But UEFI don't use them. So exclude these files.
Functions in crypto/rand/randfile.c OpenSSL and edk2 don't
call them. And it requires more crt runtime support.
So exclude it.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Signed-off-by: Xiaoyu Lu <xiaoyux.lu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1089
OpenSSL configure mechanism use --with-rand-seed=xxx option to configure
random number generation.
OpenSSL_1_1_0j(74f2d9c1ec5f5510e1d3da5a9f03c28df0977762)
we use default --with-rand-seed=os option to for building it.
But OpenSSL_1_1_1b(50eaac9f3337667259de725451f201e784599687)
only support seeding NONE for UEFI(rand_unix.c line 93).
This OpenSSL change was introduced in commit
8389ec4b4950 ("Add --with-rand-seed", 2017-07-22).
So add --with-rand-seed=none to process_files.pl.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Signed-off-by: Xiaoyu Lu <xiaoyux.lu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
The upstream SoftFloat code that was recently incorporated into
ArmSoftFloatLib uses some parameterization to tweak the inlining
and optimization behavior for different compilers.
The custom platform.h file that sets these parameters is based on
the upstream version for Linux/ARM, but was updated to include the
'always_inline' GCC attribute into the INLINE macro, to ensure that
all definitions that are marked as inline are not only inlined into
their callers, but also to ensure that no version of the function is
ever emitted into the object file.
This works fine on recent GCC and Clang, but the latter part turns
out to break on GCC 4.x, resulting duplicate definition linker errors.
Fortunately, the synticatically more appriopriate 'static inline'
works fine on both the recent and the older compilers, so let's switch
to that instead.
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Clang 7 complains about the vmsr instruction in ArmV7Support.S,
which is only available on cores that implement some flavour of
VFP. So set the .fpu to NEON like we do in some other places.
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Update the INF description and the top level .c files in order to
switch to the new version of the SoftFloat library imported as a
Git submodule in the previous patch.
Note that we no longer use the code that travelled a long way from
the 2002 version of the softfloat library via NetBsd and the StdLib
package. Instead, we are using the upstream version unmodified, with
the glue .c file adopted from the OP-TEE project. This approach is
much cleaner and much more maintainable.
Note that support for the RVCT toolchains is being dropped at the same
time. RVCT is mostly untested, and planned to be removed, and so it
makes little sense to go to the trouble of upgrading this library for
RVCT as well.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1845
Acked-by: Jian J Wang <jian.j.wang@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1862
Current implementation of function AhciModeInitialization() has an
incorrect assumption that the value in the CAP (offset 00h) register will
always be greater than the highest bit set for the value in the PI (offset
0Ch) register.
This will lead to an issue that hard disk devices may not be found in the
non-S3 boot path for some AHCI controller capabilities.
More specifically, variable 'PortInitializeBitMap' will have the value
from 'Private->PortBitMap', which will be 0xFFFFFFFF in non-S3 boot path.
When the CAP register is of value 0x1 and PI register with value 0x4
(meaning port 2 is available), the current logic will only enumerate port
0. And the device attached behind port 2 will not be enumerated.
To address this issue, variable 'PortInitializeBitMap' will now take the
bitwise and result between 'Private->PortBitMap' and the value read from
the PI register.
Please note that there will be no function impact for S3 path, since in
this case, the bits being set in 'Private->PortBitMap' will be a subset
of the bits being set in the PI register. Their bitwise and operation will
still be the value of 'Private->PortBitMap'.
Cc: Maggie Chu <maggie.chu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Remove CorebootModulePkg and CorebootPayloadPkg, and add
UefiPayloadPkg to reflect recently change in UEFI payload.
wiki link for UefiPayloadPkg would be available soon.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
The devel mailing list has moved from 01.org to groups.io - update
the mailing list information to reflect this.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1806
Current Binary Cache use the PlatformInfo.Name to distinguish
the different platform cache paths in the database folder.
But the different platforms might use the same PLATFORM_NAME
in the DSC files. Different platform caches might overlay each
other inside Binary Cache database if they use same platform name
Use the PlatformInfo.Platform.OutputDirectory instead of the
PlatformInfo.Name can solve the problem.
This patch is going to fix that issue.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Network related modules have been included in NetworkPkg.dsc.
They can be removed from MdeModulePkg.dsc.
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1788
In V3: Must generate hashes before attempting to copy from cache for
hash verifcation
In V2: Build failure caused by passing incorrect boolean parameter to
SaveFileOnChange(). Fixed for patch instances.
Library hashing is now supported by the --hash feature. The --hash
feature implementation assumed that the hashing could be done in
place once per module, but that isn't true for libraries due to the
fact that they are built as dependencies. So on a clean build, we now
generate the .hash after the library dependencies are complete.
Added early escape as optimization, if hash already exists in memory.
Signed-off-by: Christian Rodriguez <christian.rodriguez@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1648
When a module in a DSC file uses a FILE_GUID override in the
module scoped <Defines> section, a copy of the modified INF file
is placed in the Conf/.cache directory. The check for private
includes uses the INF path to determine if the module is allowed
to use the private includes. Since the INF path in this case is
not in any package, this check always fails, and no private
include paths are possible.
The fix is to keep both the OriginalPath and the new Path in
the PathClass object, and always use the OriginalPath to see if
the module INF is in the package with private includes.
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The ID Type Structure (Type 2) inside the Processor Properties
Topology Table (PPTT) has a VENDOR_ID field which identifies the
node vendor. The approved values are listed in the ACPI ID Registry
and they are meant to be interpreted as arrays of ASCII characters.
This change to the acpiview parser for PPTT aims to reflect that.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Removed conditional pre-compiling for ARM CPUs because function
ValidateCacheAttributes(..) is based on ACPI PPTT specification.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reported-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Bi Dandan <dandan.bi@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The ACPI 6.2 specification mandates that the Generic Timer (GT) Block
Timer Structures must have a frame number in the range 0-7.
Update the GTDT parser to warn if this condition is violated.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Assume that we boot OVMF in a QEMU guest with 1025 MB of RAM. The
following assertion will fire:
> ASSERT_EFI_ERROR (Status = Out of Resources)
> ASSERT OvmfPkg/PlatformPei/MemDetect.c(696): !EFI_ERROR (Status)
That's because the range [1025 MB, 4 GB) that we try to mark as
uncacheable with MTRRs has size 3071 MB:
0x1_0000_0000
-0x0_4010_0000
--------------
0x0_BFF0_0000
The integer that stands for the uncacheable area size has 11 (eleven) bits
set to 1. As a result, covering this size requires 11 variable MTRRs (each
MTRR must cover a naturally aligned, power-of-two sized area). But, if we
need more variable MTRRs than the CPU can muster (such as 8), then
MtrrSetMemoryAttribute() fails, and we refuse to continue booting (which
is justified, in itself).
Unfortunately, this is not difficult to trigger, and the error message is
well-hidden from end-users, in the OVMF debug log. The following
mitigation is inspired by SeaBIOS:
Truncate the uncacheable area size to a power-of-two, while keeping the
end fixed at 4 GB. Such an interval can be covered by just one variable
MTRR.
This may leave such an MMIO gap, between the end of low-RAM and the start
of the uncacheable area, that is marked as WB (through the MTRR default).
Raise the base of the 32-bit PCI MMIO aperture accordingly -- the gap will
not be used for anything.
On Q35, the minimal 32-bit PCI MMIO aperture (triggered by RAM size 2815
MB) shrinks from
0xE000_0000 - 0xAFF0_0000 = 769 MB
to
0xE000_0000 - 0xC000_0000 = 512 MB
On i440fx, the minimal 32-bit PCI MMIO aperture (triggered by RAM size
3583 MB) shrinks from
0xFC00_0000 - 0xDFF0_0000 = 449 MB
to
0xFC00_0000 - 0xE000_0000 = 448 MB
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1814
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1666941
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1701710
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Commit 7b8fe63561 ("OvmfPkg: PlatformPei: enable PCIEXBAR (aka MMCONFIG
/ ECAM) on Q35", 2016-03-10) claimed that,
On Q35 machine types that QEMU intends to support in the long term, QEMU
never lets the RAM below 4 GB exceed 2 GB.
Alas, this statement came from a misunderstanding that occurred while we
worked out the interface contract. In fact QEMU does allow the 32-bit RAM
extend up to 0xB000_0000 (exclusive), in case the RAM size falls in the
range (0x8000_0000, 0xB000_0000) (i.e., the RAM size is greater than
2048MB and smaller than 2816MB).
In turn, such a RAM size (justifiedly) triggers
ASSERT (TopOfLowRam <= PciExBarBase);
in MemMapInitialization(), because we placed the 256MB PCIEXBAR at
0x8000_0000 (2GB) exactly, relying on the interface contract. (And, the
32-bit PCI window would follow the PCIEXBAR, covering the [0x9000_0000,
0xFC00_0000) range.)
In order to fix this, reorder the 32-bit PCI window against the PCIEXBAR,
as follows:
- start the 32-bit PCI window where it starts on i440fx as well, that is,
at 2GB or TopOfLowRam, whichever is higher;
- unlike on i440fx, where the 32-bit PCI window extends up to 0xFC00_0000,
stop it at 0xE000_0000 on q35,
- place the PCIEXBAR at 0xE000_0000.
(We cannot place the PCIEXBAR at 0xF000_0000 because the 256MB MMIO area
that starts there is not entirely free.)
Before this patch, the 32-bit PCI window used to only *end* at the same
spot (namely, 0xFC00_0000) between i440fx and q35; now it will only
*start* at the same spot (namely, 2GB or TopOfLowRam, whichever is higher)
between both boards.
On q35, the maximal window shrinks from
0xFC00_0000 - 0x9000_0000 = 0x6C00_0000 == 1728 MB
to
0xE000_0000 - 0x8000_0000 == 1536 MB.
We lose 192 MB of the aperture; however, the aperture is now aligned at
1GB, rather than 256 MB, and so it could fit a 1GB BAR even.
Regarding the minimal window (triggered by RAM size 2815MB), its size is
0xE000_0000 - 0xAFF0_0000 = 769 MB
which is not great, but probably better than a failed ASSERT.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1814
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1666941
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1701710
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
This patch updates the platform DSC/FDF files to use the include fragment
files provided by NetworkPkg.
The feature enabling flags in [Defines] section have been updated to use
the NetworkPkg's terms, and the value has been overridden with the original
default value on this platform.
v2:Add check for NETWORK_SNP_ENABLE and NETWORK_TLS_ENABLE.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Message-Id: <20190516081810.27840-4-shenglei.zhang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1293
[lersek@redhat.com: add TianoCore Bugzilla reference]
[lersek@redhat.com: undo spurious whitespace changes]
[lersek@redhat.com: clarify SNP and TLS rejection messages]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
For QA test and development, we may need to test Secure Boot with a
devel key instead of UEFI CA.
This commit adds an argument, "--no-default", to EnrollDefaultKeys.efi.
With the argument, the key from SMBIOS Type 11 will also be enrolled
into db. Besides, the keys in AuthData.c, i.e. Microsoft KEK CA,
Microsoft PCA, and Microsoft UEFI CA will be excluded, so the developer
can easily create a varstore template for a specific key.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Gary Lin <glin@suse.com>
Message-Id: <20190516030834.12203-1-glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1722
We plan to merge the BaseUefiTianoCustomDecompressLib
in MdeModulePkg into the BaseUefDecompressLib in MdePkg.
In order to reduce the duplicated codes and maintain
easily.
This patch adds a new fdf file in BaseUefDecompressLib
(BaseUefiTianoCustomDecompressLib.inf) to keep the same
functionality and usage model with the one in MdeModulePkg,
and then update consumer to use this new one one and
remove the one in MdeModulePkg finally.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1136
CVE: CVE-2018-12182
Customer met system hang-up during serial port loopback test in OS.
It is a corner case happened with one CPU core doing "out dx,al" and
another CPU core(s) doing "rep outs dx,byte ptr [rsi]".
Detailed code flow is as below.
1. Serial port loopback test in OS.
One CPU core: "out dx,al" -> Writing B2h, SMI will happen.
Another CPU core(s): "rep outs dx,byte ptr [rsi]".
2. SMI happens to enter SMM.
"out dx" (SMM_IO_TYPE_OUT_DX) is saved as I/O instruction type in
SMRAM save state for CPU doing "out dx,al".
"rep outs dx" (SMM_IO_TYPE_REP_OUTS) is saved as I/O instruction
type and rsi is save as I/O Memory Address in SMRAM save state for
CPU doing "rep outs dx, byte ptr [rsi]".
NOTE: I/O Memory Address (rsi) is a virtual address mapped by
OS/Virtual Machine.
3. Some SMM code calls EFI_SMM_CPU_PROTOCOL.ReadSaveState() with
EFI_SMM_SAVE_STATE_REGISTER_IO and parse data returned.
For example:
https://github.com/tianocore/edk2/blob/master/QuarkSocPkg/
QuarkNorthCluster/Smm/DxeSmm/QncSmmDispatcher/QNC/QNCSmmSw.c#L76
4. SmmReadSaveState() is executed to read save state for
EFI_SMM_SAVE_STATE_REGISTER_IO.
- The SmmReadSaveState() function in
"UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.c" calls the
SmmCpuFeaturesReadSaveStateRegister() function, from the platform's
SmmCpuFeaturesLib instance.
- If that platform-specific function returns EFI_UNSUPPORTED, then
PiSmmCpuDxeSmm falls back to the common function
ReadSaveStateRegister(), defined in file
"UefiCpuPkg/PiSmmCpuDxeSmm/SmramSaveState.c".
Current ReadSaveStateRegister() in
UefiCpuPkg/PiSmmCpuDxeSmm/SmramSaveState.c is trying to copy data
from I/O Memory Address for EFI_SMM_SAVE_STATE_IO_TYPE_REP_PREFIX,
PF will happen as SMM page table does not know and cover this
OS/Virtual Machine virtual address.
Same case is for SmmCpuFeaturesReadSaveStateRegister() in platform-
specific SmmCpuFeaturesLib instance if it has similar implementation
to read save state for EFI_SMM_SAVE_STATE_REGISTER_IO with
EFI_SMM_SAVE_STATE_IO_TYPE_REP_PREFIX.
Same case is for "ins", 'outs' and 'rep ins'.
So to fix the problem, this patch updates the code to only support
IN/OUT, but not INS/OUTS/REP INS/REP OUTS for SmmReadSaveState().
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
None of the .c/.h in Arm/ are used any more => remove them.
Also merge the CC flags for MSFT ARM and ARM64, since these are the
only archs we support for this package.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
These files have \r\n line endings, but a few lines use \r\r\n which
is not a valid line ending. These lines were causing problems for git
and other tools.
Signed-off-by: Joe Richey <joerichey@google.com>
Review-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1752
This patch is to fix the code bug in StructurePcd overall
value assignment logic. If a Pcd Array size is fixed but the
size of actual value in Dsc or Dec is bigger than the Pcd
array size, the tool will report error about such setting and
stop build.
The patch is tested minplatform, Ovmf, structure pcd regression test
These tests are build pass. The patch also tested the following cases.
Our cases focused on PcdArraySize. 1.flexiable PcdArraySize.
2.Fixed PcdArraySize, Pcd overall value exceeds the size of PcdArray.
3.Fixed PcdArraySize, Pcd overall value Not exceeds the size of PcdArray.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Update the QemuVideoDxe driver to not depend on the
OptionRomPkg to support moving OptionRomPkg to the
edk2-platforms repository.
The only dependency on the OptionRomPkg is the use of
PcdDriverSupportedEfiVersion to set the version value in the
EFI Driver Supported EFI Version Protocol.
Quoting the UEFI-2.8 spec, "This protocol is required for EFI
drivers that are *on* PCI and other plug in cards" (emphasis ours).
However, QemuVideoDxe is always part of the OVMF platform firmware,
and is never read by PciBusDxe from the PCI ROM BAR of QEMU's
emulated graphics cards.
Since this protocol does not apply to QEMU environment, remove
both the PCD and the installation of the EFI Driver Supported EFI
Version Protocol.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add batch scripts to generate the LVFS compatible capsule
update driver.
Add DSC/FDF files to build capsules and invoke post build
shell scripts for Linux build environments.
Make versions consistent.
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Zailiang Sun <zailiang.sun@intel.com>
Reviewed-by: Yi Qian <yi.qian@intel.com>
In preparation for moving Vlv2TbltDevicePkg to the
edk2-platforms repository, the batch scripts used to build
this platform are updated to not make any assumptions about
the directory location of Vlv2TbltDevicePkg.
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Zailiang Sun <zailiang.sun@intel.com>
Reviewed-by: Yi Qian <yi.qian@intel.com>
Update the binary file that contains the default configuration
settings. This file is generated using FCE.exe during a
Windows build and this binary file needs to be updated when
there are changes to the configuration setting layout or
configuration setting default values.
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Zailiang Sun <zailiang.sun@intel.com>
Reviewed-by: Yi Qian <yi.qian@intel.com>
Add the PcdInitSmm module that should not have been
removed. This module performs actions at Exit Boot
Services to place devices in an OS compatible state.
Without this module, some versions of Linux can not
boot.
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Zailiang Sun <zailiang.sun@intel.com>
Reviewed-by: Yi Qian <yi.qian@intel.com>
The NumberOfEnabledProcessors parameter to the MP Services
Protocol service GetNumberOfProcessors() is not optional and is
not allowed to be NULL. Add the CpuEnabledCount local variable
and pass it into GetNumberOfProcessors().
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Zailiang Sun <zailiang.sun@intel.com>
Reviewed-by: Yi Qian <yi.qian@intel.com>
Add the arch protocols gEfiVariableArchProtocolGuid and
gEfiVariableWriteArchProtocolGuid to the dependency expression
for the AcpiPlatform module to guarantee that the variables
that AcpiPlatform depends upon are set before they are used by
this module.
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Zailiang Sun <zailiang.sun@intel.com>
Reviewed-by: Yi Qian <yi.qian@intel.com>
Change the type of the local variable Size in the function
AcpiPlatformEntryPoint() from UINT32 to UINTN. This local
variable is passed into the function ReadSection() that returns
a value of type UINTN. Using type UINT32 can potentially
corrupt an adjacent local on the stack.
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Zailiang Sun <zailiang.sun@intel.com>
Reviewed-by: Yi Qian <yi.qian@intel.com>
If the FLASH device cannot be erased or written, then the
flag FlashError is set to TRUE.
Add the missing logic to return an error if FlashError
is TRUE. The missing logic was found from a GCC build that
noticed a local variable was declared and assigned, but was
not being used.
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Zailiang Sun <zailiang.sun@intel.com>
Reviewed-by: Yi Qian <yi.qian@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1721
Remove two inf files form EmulatorPkg.
About IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf,
this inf file is not included in the EmulaotrPkg.fdf,
which means the StatusCodePei.inf does't work at all,
so it is ok to remove it from EmulatorPkg.
About IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf,
in the inf file, we can see it consumes gEfiIdeControllerInitProtocolGuid.
there are only two inf files in the edk project that produce this Protocol,
as belows:
PcAtChipsetPkg\Bus\Pci\IdeControllerDxe\IdeControllerDxe.inf
MdeModulePkg\Bus\Pci\SataControllerDxe\SataControllerDxe.inf
However, neither of them is included in the EmulatorPkg.dsc.
It means the IdeBusDxe.inf can't work at all,
so it is ok to remove it from EmulatorPkg.
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
DEPEX from PEI storage stack.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1777
BootInRecoveryMode Ppi dependency should be removed from PEI storage stack
drivers. Besides recovery, more features are using the storage stack.
Platform can apply Ppi dependency in Recovery FV which contains full
storage driver stack. Platform storage stack modules, such as host
controller init PEI module, should also remove this dependency.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1777
BootInRecoveryMode Ppi dependency should be removed from PEI storage stack
drivers. Besides recovery, more features are using the storage stack.
Platform can apply Ppi dependency in Recovery FV which contains full
storage driver stack. Platform storage stack modules, such as host
controller init PEI module, should also remove this dependency.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
This reverts commit df7c81b5b2.
In commint df7c81b5b219c9,used a function to test python module
But the Boolean value of the return value of this function is the
opposite of the Correct result, resulting in an unexpected result
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1782
After change behavior to send BlockSid command at EndOfDxe point,
check device ownership command will return un-authority error, it
finally caused opal driver can't show "Enable Feature" menu.
Update the code logic to send detect device ownership command
before send BlockSID command.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
This patch provides a set of include segment files for platform owner to
easily enable/disable network stack support on their platform.
For DSC, there are:
- a "NetworkDefines.dsc.inc" for the [Defines] section(s),
- a "NetworkLibs.dsc.inc" for the [LibraryClasses*] section(s),
- a "NetworkPcds.dsc.inc" for the [Pcds*] section(s),
- a "NetworkComponents.dsc.inc" for the [Components*] section(s).
For FDF, there is:
- a "Network.fdf.inc" for the [Fv*] section(s).
These files can be added to the platform DSC/FDF file by using
!include NetworkPkg/xxx
where "xxx" is the *.inc file name.
A platform DSC file can diverge from the defaults in
"NetworkDefines.dsc.inc" by setting the individual DEFINEs before
including "NetworkDefines.dsc.inc".
And, build command line ("-D FLAG=VALUE") can be used to enable or
disable related feature set, please check "NetworkDefines.dsc.inc"
for a detail description of each flag.
The default value of these flags are:
DEFINE NETWORK_ENABLE = TRUE
DEFINE NETWORK_SNP_ENABLE = TRUE
DEFINE NETWORK_IP4_ENABLE = TRUE
DEFINE NETWORK_IP6_ENABLE = TRUE
DEFINE NETWORK_TLS_ENABLE = TRUE
DEFINE NETWORK_HTTP_BOOT_ENABLE = TRUE
DEFINE NETWORK_ALLOW_HTTP_CONNECTIONS = FALSE
DEFINE NETWORK_ISCSI_ENABLE = TRUE
DEFINE NETWORK_VLAN_ENABLE = TRUE
Related BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1293
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
This is a shell application to dump dynamic PCD settings.
Type DumpDynPcd -?/h/H to get help information.
Type DumpDynPcd -v/V to get version information.
Type DumpDynPcd [PcdName] to get Pcd information.
https://bugzilla.tianocore.org/show_bug.cgi?id=1541
v2:1.Add static for global variables.
2.Change the parameter amount of InternalStrnCatGrow in DumpDynPcd.c.
3.Add open brace according to EDK II C Coding Standards Specification.
4.Remove the dependency on ShellPkg.dec in DumpDynPcd.inf.
v3:Add static for all global variables and internal functions.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Some systems such as FreeBSD identify the platform as 'arm64'
and not 'aarch64' as Linux does.
Signed-off-by: Rebecca Cran <rebecca@bluestop.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: fix up DKIM damage in the "From:" address]
When building OvmfPkg/EnrollDefaultKeys for IA32 with gcc-4.8 for the
DEBUG target (and possibly under other build configurations too), the
compiler incorrectly reports,
> OvmfPkg/EnrollDefaultKeys/EnrollDefaultKeys.c: In function
> 'ShellAppMain':
> OvmfPkg/EnrollDefaultKeys/EnrollDefaultKeys.c:631:10: error:
> 'SizeOfPkKek1' may be used uninitialized in this function
> [-Werror=maybe-uninitialized]
> Status = EnrollListOfCerts (
> ^
> OvmfPkg/EnrollDefaultKeys/EnrollDefaultKeys.c:703:12: error: 'PkKek1'
> may be used uninitialized in this function [-Werror=maybe-uninitialized]
> FreePool (PkKek1);
> ^
> cc1: all warnings being treated as errors
Suppress this warning, in the style suggested under
<https://bugzilla.tianocore.org/show_bug.cgi?id=607>.
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: be9470b3c9
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1764
Some compiler flags restrict the compiler from making
arbitrary decisions while handling undefined C/C++ behaviors.
Therefore they can be used to fix some issues caused by undefined behavior.
For example, for GCC, the following flags are available:
-fno-delete-null-pointer-checks tells
the compiler NOT to assume that null pointer deference does not exist.
-fwrapv tells the compiler that signed overflow always wraps.
This patch is going to add these 2 build options to
BaseTool GCC build option.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The following commit removed the unconditional UC setting
just prior to closing the SMRAM region. This is a correct
change for most platforms.
bfc87aa78e
The Quark platforms still require this UC setting, so move
the UC setting into the Quark specific SMM Access Protocol
when the Close() service is called.
Cc: Kelly Steele <kelly.steele@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Kelly Steele <kelly.steele@intel.com>
The CpuMpPei module uses a services from the CpuLib class,
but the CpuLib class is missing from the INF file. This
update is required to use the new MpInitLibUp instance that
does not use the CpuLib class.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Add a new instance of the MpInitLib that is designed for
uniprocessor platforms that require the use of modules
that depend on the MP_SERVICES_PROTOCOL for dispatch
or to retrieve information about the boot processor.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Set PcdSpeculationBarrierType to use CPUID instead of the
default LFENCE in the BaseLib function SpeculationBarrier().
LFENCE requires SSE2, and Quark platforms do not support
SSE2.
Cc: Kelly Steele <kelly.steele@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kubacki <michael.a.kubacki@intel.com>
Use PcdSpeculationBarrierType in the x86 implementation
of SpeculationBarrier() to select between AsmLfence(),
AsmCpuid(), and no operation.
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brian J. Johnson <brian.johnson@hpe.com>
Add gEfiMdePkgTokenSpaceGuid.PcdSpeculationBarrierType that
uses the PCD type FixedAtBuild. This performs a build time
selection for the type of speculation barrier to use in the
BaseLib function SpeculationBarrier(). The recommended
speculation barrier for x86 is LFENCE and this is the default
value for this PCD. x86 CPUs that do not support LFENCE must
select one of the other supported values which includes CPUID
and nothing.
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brian J. Johnson <brian.johnson@hpe.com>
On Xen, hvmloader firmware leaves address decoding enabled for
enumerated PCI device before jumping into OVMF. OVMF seems to
expect it to be disabled and tries to size PCI BARs in several places
without disabling it which causes BAR64, for example, being
incorrectly placed by QEMU.
Fix it by disabling PCI address decoding explicitly before the
first attempt to size BARs on Xen.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
In case BAR64 is placed below 4G choose the correct aperture.
This fixes a failed assertion down the code path.
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
This aperture doesn't exist in QEMU-XEN and hvmloader places BARs
in arbitrary order disregarding prefetchable bit. This makes
prefetchable and non-prefetchable BARs to follow each other that's
quite likely with PCI passthrough devices. In that case, the existing
code, that tries to work out aperture boundaries by reading hvmloader
BAR placement, will report a bogus prefetchable aperture which overlaps
with the regular one. It will eventually trigger an assertion in
DXE PCI initialization code.
Do the same thing as OVMF on QEMU-KVM and pass a non-existing aperture
there. It's not necessary to pass additional allocation flags as we set
ResourceAssigned flag on the root bridge which means they will be ignored.
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Disconnect the certificate that is enrolled as both Platform Key and first
Key Exchange Key from Red Hat: expect the hypervisor to specify it, as
part of SMBIOS.
Example usage with QEMU:
* Generate self-signed X509 certificate:
openssl req \
-x509 \
-newkey rsa:2048 \
-outform PEM \
-keyout PkKek1.private.key \
-out PkKek1.pem
(where "PEM" simply means "DER + base64 + header + footer").
* Strip the header, footer, and newline characters; prepend the
application prefix:
sed \
-e 's/^-----BEGIN CERTIFICATE-----$/4e32566d-8e9e-4f52-81d3-5bb9715f9727:/' \
-e '/^-----END CERTIFICATE-----$/d' \
PkKek1.pem \
| tr -d '\n' \
> PkKek1.oemstr
* Pass the certificate to EnrollDefaultKeys with the following QEMU
option:
-smbios type=11,value="$(< PkKek1.oemstr)"
(Note: for the above option to work correctly, a QEMU version is needed
that includes commit 950c4e6c94b1 ("opts: don't silently truncate long
option values", 2018-05-09). The first upstream release with that commit
was v3.0.0.
Once <https://bugs.launchpad.net/qemu/+bug/1826200> is fixed, QEMU will
learn to read the file directly; passing the blob on the command will be
necessary no more.)
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1747
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Gary Lin <glin@suse.com>
According to the edk2 coding standards, "[w]hen all letters in an acronym
are capitalized, it makes the prior and subsequent words visually
difficult to distinguish".
Fix the spellings of three acronyms, accordingly:
- "KEK" (Key Exchange Key) should be written as "Kek", in "mMicrosoftKEK",
- "CA" (Certificate Authority) should be written as "Ca", in
"mMicrosoftUefiCA",
- "PCA" (Production Certificate Authority) should be written as "Pca", in
"mMicrosoftPCA".
Generate the changes with:
sed --regexp-extended --in-place \
--expression='s,\<mMicrosoftKEK\>,mMicrosoftKek,g' \
--expression='s,\<mMicrosoftUefiCA\>,mMicrosoftUefiCa,g' \
--expression='s,\<mMicrosoftPCA\>,mMicrosoftPca,g' \
OvmfPkg/EnrollDefaultKeys/EnrollDefaultKeys.c
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1747
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Gary Lin <glin@suse.com>
Having removed VALID_ARCHITECTURES from
"OvmfPkg/EnrollDefaultKeys/EnrollDefaultKeys.inf", it now makes sense to
reflect the related platform DSC bits from OvmfPkg to ArmVirtPkg.
Build "EnrollDefaultKeys.efi" as part of ArmVirtQemu and ArmVirtQemuKernel
(which are the ArmVirtPkg platforms that include SecureBootConfigDxe too).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1747
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Gary Lin <glin@suse.com>
Latest change allowed to add dependency on NvVarStoreFormattedLib
for the DXE_DRIVER modules. Although effectively it is hooked
using the 'NULL' class, extend the LIBRARY_CLASS with according
type for consistency sake.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zailiang Sun <zailiang.sun@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Microsoft ASL is not verified now.
So remove tool chain with ASL tool. They are: VS2008xASL,
VS2008x86xASL, VS2010xASL, VS2010x86xASL, VS2012xASL, VS2012x86xASL,
VS2013xASL, VS2013x86xASL, VS2015xASL, VS2015x86xASL and CYGGCCxASL.
https://bugzilla.tianocore.org/show_bug.cgi?id=1667
v2:Remove definitions of WIN_ASL_BIN, MS_ASL_OUTFLAGS and MS_ASL_FLAGS.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1597
Currently RTData are allocated at/after ReadyToBoot to store the
contents in HiiDatabase and the HII configurations for OS runtime
utilization.
Some platforms may meet S4 resume issue since the allocation after
ReadyToBoot cause memory map change.
Now this patch is to do some overallocation to minimize the number
of memory allocations after ReadyToBoot and also add warning
message when do allocation after ReadyToBoot.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
After commit 57df17fe26, some static check reports suspicious NULL pointer
deference at line:
Entry->MachineType = Entry->Emulator->MachineType;
^^^^^^^^^^^^^^^
within function PeCoffEmuProtocolNotify().
However, 'Entry->Emulator' is guaranteed to have a non-NULL value when
previous call to the CoreHandleProtocol() returns EFI_SUCCESS.
This commit will re-write the return status check for CoreHandleProtocol()
to add explicit NULL pointer check for protocol instance pointer.
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Some modules (such as FaultTolerantWriteDxe) use the FlashNvStorage
PCDs (PcdFlashNvStorageFtw*). In case the flash contents are not
mapped in memory, the module loading order of the FVB driver
may become important.
To handle above, this patch allows to hook the dependency of
desired DXE_DRIVER type module in the .DSC file via
NvVarStoreFormattedLib NULL resolution.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
When building OpenSSL, the OpenBSD/FreeBSD/DFBSD code in crypto/uid.c
calls issetugid(). Add the declaration of this function to
CrtLibSupport.h to avoid the need to patch the openssl code on these
platforms.
Signed-off-by: Rebecca Cran <rebecca@bluestop.org>
Reviewed-by: Jian Wang <jian.j.wang@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1483
This commit will add the PEI BlockIO (2) PPIs support for AHCI mode ATA
devices.
More specifically, the driver will consume the ATA AHCI host controller
PPI for ATA controllers working under AHCI code within the system. And
then produces the below additional PPIs for each controller:
EFI PEI Recovery Block IO PPI
EFI PEI Recovery Block IO2 PPI
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1483
Due to the limited resource on the VTd DMA buffer size in the PEI phase,
the driver will limit the maximum transfer block number for 48-bit
addressing.
According to PCDs:
gIntelSiliconPkgTokenSpaceGuid.PcdVTdPeiDmaBufferSize|0x00400000
gIntelSiliconPkgTokenSpaceGuid.PcdVTdPeiDmaBufferSizeS3|0x00200000
The default buffer size allocated for IOMMU mapping is:
* 4M bytes for non-S3 cases;
* 2M bytes for S3
For ATA devices in 48-bit address mode, the maximum block number is
currently set to 0xFFFF. For a device with block size equal to 512 bytes,
the maximum buffer allowed for mapping within AhciPei driver will be close
to 32M bytes. Thus, this commit will limit the 48-bit mode maximum block
number to 0x800, which means 1M-byte maximum buffer for mapping when the
block size of a device is 512 bytes. By doing so, potential failure on
calls to the IOMMU 'Map' service can be avoided.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The DxeCapsuleLibFmp code accesses the ESRT table to decide whether
a certain capsule is an FMP capsule. Since the UEFI spec mandates
that the ESRT resides in EfiBootServicesData memory, this results
in problems at OS runtime, since the firmware implementation itself
cannot access memory that has not been virtually remapped.
So let's take a private copy of the ESRT at ReadyToBoot, and store
it in EfiRuntimeServicesData memory. The ESRT's size is order 10s
of bytes so the memory footprint is going to be negligigble.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Removed Gang Wei from reviewer as he already left.
Updated Wang Jian to Maintainer of CryptoPkg and Ye Ting to reviewer of CryptoPkg.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ting Ye <ting.ye@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1729
On some build environment, build fails but on the other build machines,
build success. This is the regression issue introduced by commit
05217d210e
As Dict is unordered, an error occurs when extract the index of the Dict
in the order of the keys after the creation of a new item.
Keys are indexed inconsistently before and after adding a new item.
The logic of the program is to store the key's corresponding index as
reference data in the MakeFile and use it as part of the macro.
The data model is: $(LIST_%d) % Dict.keys().index(Key)
So for now, use OrdereDict instead of Dict.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1695
Setup need provide an item for user to control IPV46 PXE boot.
Origin UefiPxeBcDxe driver doesn't have such interface.
This change added two PCD to control IPV4/6 PXE in PxeBcSupported().
Platform code should override this two PCD according to Setup value.
code change no side effect on current PXE function with default PCD.
Signed-off-by: Xue ShengfengX <shengfengx.xue@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
The real mode interrupt vector table, which we modify for the sake of
Windows 7, starts at address 0, which happens to be the representation of
null pointers on all edk2 architectures. A null pointer may never undergo
pointer arithmetic, and RH covscan justifiedly reports:
> Error: CPPCHECK_WARNING (CWE-682):
> edk2-89910a39dcfd/OvmfPkg/QemuVideoDxe/VbeShim.c:105:
> error[nullPointerArithmetic]: Pointer addition with NULL pointer.
> # 103| //
> # 104| Segment0Pages = 1;
> # 105|-> Int0x10 = (IVT_ENTRY *)(UINTN)Segment0 + 0x10;
> # 106| Segment0AllocationStatus = gBS->AllocatePages (
> # 107| AllocateAddress,
Fix this by calculating the EFI_PHYSICAL_ADDRESS of IVT entry 0x10 first,
and by casting the address to the right type second.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1710
Issue: scan-1002.txt
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Use HpetTimerDxe instead of SmartTimer protocol. Retire 8259 as well.
Tested boot to Win10x64 successfully.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zailiang Sun <zailiang.sun@intel.com>
Cc: David Wei <david.wei@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Reviewed-by: Yi Qian <yi.qian@intel.com>
Use MdeModulePkg declaration of ResetSystem function, comment the one
in platform source code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zailiang Sun <zailiang.sun@intel.com>
Cc: David Wei <david.wei@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Reviewed-by: Yi Qian <yi.qian@intel.com>
As reported by Gary, the recent LoadImage/StartImage changes to
accommodate dispatching PE/COFF images built for foreign architectures
may result in a crash when loading an IA32 option ROM into a X64 VM
running OVMF:
Loading driver at 0x0007E537000 EntryPoint=0x0007E53C06D 8086100e.efi
InstallProtocolInterface: BC62157E-3E33-4FEC-9920-2D3B36D750DF 7F003B98
ProtectUefiImageCommon - 0x7F002BC0
- 0x000000007E537000 - 0x000000000009F900
Image type IA32 can't be started on X64 UEFI system.
ASSERT MdeModulePkg/Core/Dxe/Mem/Pool.c(698): Head->Signature == ((('p') |
('h' << 8)) | ((('d') | ('0' << 8)) << 16)) || Head->Signature
== ((('p') | ('h' << 8)) | ((('d') | ('1' << 8)) << 16))
This turns out to be caused by the deferred image loading code in BDS,
which ends up trying to free an uninitialized 'ExitData' pointer.
Given that ExitData is never actually used, let's just get rid of it
entirely. While we're at it, drop the pointless assignment of Status
as well.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
GenerateCapsule: error: can not encode FMP Auth Header
The system cannot find the file specified.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1716
In API mode FSP wrapper will perform some post
FSP-S process but such process was skipped in Dispatch
mode which may impact some of the boot loaders.
To align behavior between API and Dispatch, an
End-of-Pei callback is introduced to perform same process
in Dispatch mode.
Note: If boot loader implemented its own
PostFspsHobProcess (), it has to check
PcdFspModeSelection and support each mode
properly.
Test: Verified on internal platform and both
FSP API and Dispatch modes booted successfully.
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
CorebootModulePkg and CorebootPayloadPkg originally supports coreboot only.
In order to support other bootloaders, such as Slim Bootloader, they need
be updated to be more generic.
UEFI Payload (UefiPayloadPkg) a converged package from CorebootModulePkg
and CorebootPayloadPkg with following updates:
a. Support both coreboot and Slim Bootloader
b. Removed SataControllerDxe and BaseSerialPortLib16550 to use EDK2 modules
c. Support passing bootloader parameter to UEFI payload, e.g. coreboot
table from coreboot or HOB list from Slim Bootloader
d. Using GraphicsOutputDxe from EDK2 with minor change instead of FbGop
e. Remove the dependency to IntelFrameworkPkg and IntelFrameworkModulePkg
and QuarkSocPkg
f. Use BaseDebugLibSerialPort library as DebugLib
g. Use HPET timer, drop legacy 8254 timer support
h. Use BaseXApicX2ApicLib instead of BaseXApicLib
i. Remove HOB gUefiFrameBufferInfoGuid to use EDK2 graphics HOBs.
j. Other clean ups
On how UefiPayloadPkg could work with coreboot/Slim Bootloader, please
refer UefiPayloadPkg/BuildAndIntegrationInstructions.txt
Once UefiPayloadPkg is checked-in, CorebootModulePkg and CorebootPayloadPkg
could be retired.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Now that the EBC machine type is no longer classified as a
natively supported machine type on the architectures that can
support it via the EBC interpreter, the EBC specific handling
in DXE core is no longer used and can be removed.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Instead of classifying EBC as a supported machine type and have special
handling in DXE core for loading EBC images, make it a foreign type and
rely on the EDK2 PE/COFF image emulator protocol to claim the image when
the DXE core finds that it cannot be supported natively.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Implement the new EDK2 PE/COFF image emulator protocol so that we can
remove the EBC specific handling in the DXE core and other places in
the core code.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Allow PE/COFF images that must execute under emulation for Driver####
options, by removing the redundant machine type check from the BDS code.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Delete the explicit machine type check for option ROM images, and instead,
rely on the LoadImage() boot service to decide whether an option ROM can
be dispatched or not. This permits platforms to ship with emulators to
execute option ROMs that are not native to the processor architecture.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
When encountering PE/COFF images that cannot be supported natively,
attempt to locate an instance of the PE/COFF image emulator protocol,
and if it supports the image, proceed with loading it and register it
with the emulator.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Introduce a protocol that can be invoked by the image loading services
to execute foreign architecture PE/COFF images via an emulator.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1153
The '-s' option of 'acpiview' do not support multiply invcation options.
So clarify it for users.
Modify the help decription for UefiShellAcpiViewCommandLib which the
description is equal or over 80 column. If the line include equal or over
80 characters. The display engine would display a blank line for those
equal 80 characters or a extra line with few words for those over 80
character. So it is better to keep each line less than 80 characters.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1496
This commit will remove the IntelFrameworkPkg DEC file dependency in the
driver INF file.
A new GUID has been updated for the INF file.
Corresponding changes have been made in OVMF DSC files as well in order to
verify the build.
Please note that a subsequent commit (final patch of the series) will:
A) Add OvmfPkg/8254TimerDxe driver in OVMF FDF files;
B) Remove the consumption of PcAtChipsetPkg/8254TimerDxe driver in OVMF
DSC/FDF files.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1496
Several updates have been made to the
OvmfPkg/8259InterruptControllerDxe driver to make it build under OvmfPkg:
A) Update the driver INF file to consume PCDs defined within OvmfPkg;
B) Remove the unnecessary dependency on the IntelFrameworkPkg header file
'FrameworkDxe.h';
C) Remove the IntelFrameworkPkg & PcAtChipsetPkg DEC files dependency in
the driver INF file.
A new GUID has been updated for the INF file.
Corresponding changes have been made in OVMF DSC files as well in order to
verify the build.
Please note that a subsequent commit (final patch of the series) will:
A) Add OvmfPkg/8259InterruptControllerDxe driver in OVMF FDF files;
B) Remove the consumption of PcAtChipsetPkg/8259InterruptControllerDxe
driver in OVMF DSC/FDF files;
C) Remove the consumption of
gPcAtChipsetPkgTokenSpaceGuid.Pcd8259LegacyModeEdgeLevel in OVMF DSC
files.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Fix a few typos in LegacyBiosBuildE820, and improve the debug output of
the E820 table to pad with zeros instead of spaces, remove extra hyphens
and display the memory type in decimal.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Rebecca Cran <rebecca@bluestop.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1683
BaseUefiDecompressLib in MdePkg is the
base UEFI decompress Library.
BaseUefiTianoCustomDecompressLib in IntelFrameworkModulePkg
implements the base UEFI decompress functionality and Tiano
decompress functionality.
Platform doesn't use the TianoCompress, so do
not have to use BaseUefiTianoCustomDecompressLib,
can use the BaseUefiDecompressLib in MdePkg directly.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1683
V2: Add a single UefiDecompressLib resolution to the
common section and drop all the others.
BaseUefiDecompressLib in MdePkg is the
base UEFI decompress Library.
BaseUefiTianoCustomDecompressLib in IntelFrameworkModulePkg
implements the base UEFI decompress functionality and
Tiano decompress functionality.
1. TIANOCOMPRESSED rule in BeagleBoardPkg.fdf
is not used, so remove it.
2. Platform doesn't use the TianoCompress, so do
not have to use BaseUefiTianoCustomDecompressLib,
can use the BaseUefiDecompressLib in MdePkg directly.
3. A single UefiDecompressLib common resolution can
apply to all module types now. So add the single
UefiDecompressLib in MdePkg in [LibraryClasses.common]
section and remove all others.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1683
V2: Use the common UefiDecompressLib resolution in
[LibraryClasses.common] section and drop all the others.
BaseUefiDecompressLib in MdePkg is the
base UEFI decompress Library.
BaseUefiTianoCustomDecompressLib in IntelFrameworkModulePkg
implements the base UEFI decompress functionality and
Tiano decompress functionality.
1. TIANOCOMPRESSED rule in ArmVirtRules.fdf.inc
is not used, so remove it.
2. Platform doesn't use the TianoCompress, so do
not have to use BaseUefiTianoCustomDecompressLib,
can use the BaseUefiDecompressLib in MdePkg directly.
3. UefiDecompressLib common resolution now can apply to
all module types. So keep the UefiDecompressLib resolution
in [LibraryClasses.common] section and remove all others.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1450
In the Multiple thread Genfds feature, build tool generates
GenSec, GenFFS command in Makefile.
The Non-Hii Driver does not generate .offset file for uni string offset,
but the build tool has not knowledge about this in autogen phase. So
in this patch, I add a check in Makefile for GenSec command. If the GenSec
input file does not exist, the GenSec will not be called. And if GenSec
command is not called, its output file, which is also the input file of
GenFfs command, will also not exist.So for GenFfs command,
I add a new command parameter -oi which means
the input file is an optional input file which would not exist. so
that I can generate GenFfs command with "-oi" parameter in Makefile.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1628
Current FbGop driver might bind to the wrong PCI device
if a system has multiple PCI display devices. The original
idea was to reuse the generic GraphicsOutputDxe to address
this issue. However, after exploring different approaches
discussed in the bugzilla, it turned out that the best
approach is to enhance the current FbGop driver to match
the PCI device BAR value with the framebuffer base address.
This patch implemented this enhancement by selecting the
PCI device with matched framebuffer base in its PCI BAR.
This has been tested with coreboot on QEMU and Apollo Lake
platform.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
Reserved6 is changed to Reserved7 because the bit width is changed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
GetProcessorLocation2ByApicId() extracts the
package/die/tile/module/core/thread ID from the initial APIC ID.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Zhiqiang Qin <zhiqiang.qin@intel.com>
Leaf 1FH is very similar to leaf 0BH. Both return the CPU topology
information.
Leaf 0BH returns 3-level (Package/Core/Thread) CPU topology info.
Leaf 1FH returns 6-level (Package/Die/Tile/Module/Core/Thread) CPU
topology info.
The logic to enumerate the topology info is the same.
But today's logic to handle 1FH is completely wrong.
The patch combines them together to fix the 1FH issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Zhiqiang Qin <zhiqiang.qin@intel.com>
Per SDM CPUID.0BH and CPUID.1FH outputs the same format of data in
EAX/EBX/ECX/EDX except CPUID.1FH reports more level types such as
module, tile, die.
The patch removes the unnecessary duplicated structure definitions
for CPUID.1FH because when the structure definitions for CPUID.0BH
can be used for CPUID.1FH.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Zhiqiang Qin <zhiqiang.qin@intel.com>
PcdCpuFeaturesSupport used to specify the platform policy about
what CPU features this platform supports. This PCD will be used
in IsCpuFeatureSupported only.
Now RegisterCpuFeaturesLib use this PCD as an template to Get the
pcd size. Update the code logic to replace it with
PcdCpuFeaturesSetting.
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1375
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
PcdCpuFeaturesUserConfiguration.
Merge PcdCpuFeaturesUserConfiguration into PcdCpuFeaturesSetting.
Use PcdCpuFeaturesSetting as input for the user input feature setting
Use PcdCpuFeaturesSetting as output for the final CPU feature setting
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1375
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
V2 changes:
Update the commit message and comments in the code.
When waking vector buffer allocated by CpuDxe is tested by MemTest86
in MP mode, an error is reported because the same range of memory is
modified by both CpuDxe driver and MemTest86.
The waking vector buffer is not expected to be tested by MemTest86 if
it is allocated out because MemTest86 only tests free memory. But
current CpuDxe driver "borrows" buffer instead of allocate buffer for
waking vector buffer (through allocate & free to get the buffer
pointer, backup the buffer data before using it and restore it after
using). With this implementation, if the buffer borrowed is not used
by any other drivers, MemTest86 tool will treat it as free memory
and test it.
In order to fix the above issue, CpuDxe changes to allocate the
buffer below 1M instead of borrowing it. But directly allocating
memory below 1MB causes LegacyBios driver fails to start. LegacyBios
driver allocates memory range from
"0xA0000 - PcdEbdaReservedMemorySize" to 0xA0000 as Ebda Reserved
Memory. The minimum value for "0xA0000 - PcdEbdaReservedMemorySize"
is 0x88000. If LegacyBios driver allocate this range failed, it
asserts.
LegacyBios also reserves range from 0x60000 to
"0x60000 + PcdOpromReservedMemorySize", it will be used as Oprom
Reserve Memory. The maximum value for "0x60000 +
PcdOpromReservedMemorySize" is 0x88000. LegacyBios driver tries to
allocate these range page(4K size) by page. It just reports warning
message if some pages are already allocated by others.
Base on above investigation, one page in range 0x60000 ~ 0x88000 can
be used as the waking vector buffer.
LegacyBios driver only reports warning when page allocation in range
[0x60000, 0x88000) fails. This library is consumed by CpuDxe driver
to produce CPU Arch protocol. LagacyBios driver depends on CPU Arch
protocol which guarantees below allocation runs earlier than
LegacyBios driver.
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
AsmFuncs.S is removed at c7d22535f7.
And also it should be removed in SecPeiDebugAgentLib.inf and
SmmDebugAgentLib.inf.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1462
Original logic is that checking the CapsuleUpdate variable
and do the EnterS3WithImmediateWake if the system require a
capsule update. The EnterS3WithImmediateWake is usually
implemented in Platform ResetSystemLib instance and it may
do some operation for capsule update. For now, thess preparations
of capsule are platform reset notify functions' duty. Most
platforms need flush cache to memory before warm reset during
capsule update and this operation is added to capsule flow.
So it is safe to remove it and do not affect the capsule update
function.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PACKAGES_PATH is supposed to set manually by users. Remove the
assignment statement for PACKAGES_PATH from batch file in this commit.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zailiang Sun <zailiang.sun@intel.com>
Cc: David Wei <david.wei@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1495
This commit will add a static build flag 'USE_LEGACY_ISA_STACK' to select
the ISA driver stack.
If the flag is set to TRUE, the below driver stack will be used:
PcAtChipsetPkg/IsaAcpiDxe/IsaAcpi.inf
IntelFrameworkModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.inf
IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/IsaSerialDxe.inf
IntelFrameworkModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2keyboardDxe.inf
If the flag is set to FALSE, the below driver stack will be used:
OvmfPkg/SioBusDxe/SioBusDxe.inf
MdeModulePkg/Bus/Pci/PciSioSerialDxe/PciSioSerialDxe.inf
MdeModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2KeyboardDxe.inf
The default value is set to FALSE in OVMF DSC files.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Anthony PERARD <anthony.perard@citrix.com>
EdkCompatibilityPkg will be removed from edk2/master.
The dependency about EdkCompatibilityPkg in Nt32Pkg.dsc should
also be removed.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Commit 05fd2a9268
("MdeModulePkg/NvmExpressPei: Consume S3StorageDeviceInitList LockBox")
added a dependency on LockBoxLib to NvmExpressPei, causing builds using
MdeModulePkg.dsc to fail on architectures other than IA32/X64 with
missing reference to
gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode.
Add a resolution for LockBoxNullLib for ARM/AARCH64 to restore builds.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
The system environment: virtual-CDROM(USB interface) via BMC, insert a
iso file to CDROM, like ubuntu-18.04.1-server-arm64.iso, change CDROM
to first boot option.
With release version bios, disconnecting CDROM when boot to
"1 seconds left, Press Esc or F2 to enter Setup"
then system will get a exception.
The root cause is the EFI_BLOCK_IO_PROTOCOL for UsbMass will be uninstalled
in this situation after print some transfer error. The status will be
invalid parameter. This line will get a exception for BlockIo not point
to right address:
AllocatePool (BlockIo->Media->BlockSize)
So, here need to judge the status after ASSERT_EFI_ERROR.
The Bugzilla tracker for this:
https://bugzilla.tianocore.org/show_bug.cgi?id=1631
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <ming.huang@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
This patch was originally merged in edk2 master at
07f4e26eb6. However, this was
later reverted at 4c20a79133
as it was merged during the Soft Feature Freeze for
edk2-stable201903.
Resubmitting this patch as the edk2 merge window is now open.
Minor updates to comments and typo fixes. Also removed
unused structure CM_ARM_CPU_INFO_LIST.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This patch was originally merged in edk2 master at
d3a15f435f. However, this was
later reverted at 82c4426a17
as it was merged during the Soft Feature Freeze for
edk2-stable201903.
Resubmitting this patch as the edk2 merge window is now open.
According to ACPI 6.2 Specification - Errata A, 'One,
and only one, GIC distributor structure must be present
in the MADT for an ARM based system'. Therefore,
the GIC Distributor ID field in the ACPI MADT GICD
substructure can be set to zero and there is no need
for the Configuration Manager to provide this information.
Update the CM_ARM_GICD_INFO structure to remove the GicId
field. Similarly update the MADT Generator to set the GicId
field in the GICD substructure to zero.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This patch was originally merged in edk2 master at
6814256083. However, this was
later reverted at db8382ef5e
as it was merged during the Soft Feature Freeze for
edk2-stable201903.
Resubmitting this patch as the edk2 merge window is now open.
The DBG2_DEBUG_PORT_DDI() macro supports adding only one
Generic Base Address Register. Therefore, removed the
superfluous parameter NumReg and updated the macro to
use DBG2_NUMBER_OF_GENERIC_ADDRESS_REGISTERS which has
a value 1.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This patch originally merged in edk2 master at
c788bdaba4. However, this was
later reverted at bdbbedea94
as it was merged during the Soft Feature Freeze for
edk2-stable201903.
Resubmitting this patch as the edk2 merge window is now open.
Added option for OEMs to provide OEM Table ID and
OEM Revision for ACPI tables.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This patch was originally merged in edk2 master at
1d49a75367. However, this was
later reverted at 334111b0da
as it was merged during the Soft Feature Freeze for
edk2-stable201903.
Resubmitting this patch as the edk2 merge window is now open.
Renamed the enum EArmObjIdMapping to EArmObjIdMappingArray
and updated the IORT generator accordingly.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This patch was originally merged in edk2 master at
bde673b2dc. However, this was
later reverted at 7d180efeaa
as it was merged during the Soft Feature Freeze for
edk2-stable201903.
Resubmitting this patch as the edk2 merge window is now open.
Updated the Protocols section to reflect the protocols
that are produced or consumed.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
Added conditional choice for Logo.inf in PlatformPkg.fdf, based on the build
ARCH information. And Changed the location of binary object files to align
with previous releases (%WORKSPACE%\silicon).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: David Wei <david.wei@intel.com>
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Moved stuff in the three old packages IA32FamilyCpuPkg, Vlv2BinaryPkg and
Vlv2MiscBinariesPkg into a new package Vlv2SocBinPkg. Updated the build scripts
and added build instructions in Readme.md.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: David Wei <david.wei@intel.com>
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Remove modules of EdkCompatibilityPkg from DSC/FDF of Vlv2TbltDevicePkg to make
this platform ECP free.
Test: Boot to 64-bit Windows 10.
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: David Wei <david.wei@intel.com>
Having a top-level .dsc makes it easier to perform standalone build
tests of the core code, so add one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch changes the stated dependency in AcpiDbg2LibArm.inf from
currently listed SerialPortLib to actually required PL011UartLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1621
According to Intel SDM as below, the BIT0 should be treated as
lock bit, and BIT1 should be treated as disable(1)/enable(0) bit.
"11b: AES instructions are not available until next
RESET.
Otherwise, AES instructions are available.
If the configuration is not 01b, AES
instructions can be mis-configured if a privileged agent
unintentionally writes 11b"
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
If SD doesn't support SD_HIGH_SPEED, function should still continue to
setup SD to go into 4 bits more if it is supported. Currently, the code
inadvertently exits early, but with a EFI_SUCCESS return code, and so
execution proceeds without ever attempting to enable 4-bit mode.
Since not having SD_HIGH_SPEED support is not an error, downgrade the
message that reports this to DEBUG_INFO.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Loh Tien Hock <tien.hock.loh@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Rework some file open().readlines to open, readlines, close.
This prevents excessive file handles being open at the same time,
which may be a problem with alternative python environments.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Johnson <michael.johnson@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1620
This option is added to disable the include path check
for outside of package.
The original purpose of thie check is to make sure EDK II
modules must not reference header files outside of the packages
they depend on or within the module's directory tree.
However, we do see the usage to build EDKII as executable running
in the operating system which requires include path to outside.
For example, EmulatorPkg. The current solution (soft link) is
weird hack - EmulatorPkg\Unix\Host\X11IncludeHack.
With this solution, this can be supported easily.
The patch is validated with and without --disable-include-path-check.
If user does not use --disable-include-path-check, the build will fail
with outside path in the include path.
If user uses --disable-include-path-check, the build will pass
with outside path in the include path.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1499
Compiler cache can greatly improve the build performance and
guarantee the build result safe. In our testing, the compiler
cache can improve the overall clean build time usually by 30+%
in linux and 10+% in windows. The compiler cache are very fit
to improve the Continuous Integration (CI) build performance.
For linux compiler cache (ccache) enabling, there is no need
to update edk2 code.
Below link has the ccache enabling referencd steps:
https://github.com/shijunjing/edk2/wiki/
Edk2-compiler-cache-enabling-steps-on-Linux
For windows compiler cache (clcache) enabling, we need update
the .PDB debugging file producing option from /Zi to /Z7,
which is to let the C object file contain its full symbolic
debugging information rather than produces a separated PDB file
for all obj files per folder. "PDB files are generated by a different
process (mspdbsrv). They arrive or are updated on disk after
cl completes a compilation or linking operation. One huge problem
with caching them is that the pdb files are input files as well as
outputs. mspdbsrv updates the file with new debug information if
the file exists beforehand. If there are several compilations going
on at once targetting the same pdb then the order the pdb gets
updated is unpredictable. All this makes caching very hard."
The /Zi issue more detail disccusion can be found:
https://github.com/frerich/clcache/issues/30
Please be aware that this change has no any impact to edk2 module
level PDB file generation, and we still can get the PDB debug file
for a .efi module. The /Z7 only impact intermediate obj files level
PDB file, which is current one PDB file (vc140.pdb) per obj folder.
Below link has the clcache enabling referencd steps:
https://github.com/shijunjing/edk2/wiki/
Edk2-compiler-cache-enabling-steps-on-Windows
Have tested below tools which consume the .PDB file:
*Edk2 source code debugger
*Various hardware and software debuggers
*Uefi code coverage tools
Only update and test below most commonly used four msvc toolchains:
VS2012x86 VS2013x86 VS2015x86 VS2017
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Steven Shi <steven.shi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The PCD PcdStandaloneMmEnable is unused, and shouldn't exist in the
first place since the value is implied by the context (it is never
valid to set it to FALSE for standalone MM or TRUE for traditional
MM). So drop it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Remove the support that permits calls into the MM context to dispatch
firmware volumes that are not part of the initial standalone MM firmware
volume.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Instead of deferring dispatch of the remaining MM drivers once the
CPU driver has been dispatched, proceed and dispatch all drivers.
This makes sense for standalone MM, since all dispatchable drivers
should be present in the initial firmware volume anyway: dispatch
of additional FVs originating in the non-secure side is not supported.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Standalone MM requires 4 KB section alignment for all images, so that
strict permissions can be applied. Unfortunately, this results in a
lot of wasted space, which is usually costly in the secure world
environment that standalone MM is expected to operate in.
So let's permit the standalone MM drivers (but not the core) to be
delivered in a compressed firmware volume.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Sending DEBUG output to the serial port should only be done via
DebugLib calls, which is in charge of initializing the serial
port when appropriate. So drop the explicit SerialPortInitialize ()
invocation, and rely on normal constructor ordering to get the
serial port into the appropriate state at the right time.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Building StandaloneMmPkg from its .DSC is mainly intended for build
coverage, and so platform specific configuration such as UART addresses
don't belong here.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
gEfiMmConfigurationProtocolGuid is already defined in MdePkg, so drop
the duplicate definition from StandaloneMmPkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by "Yao, Jiewen" <jiewen.yao@intel.com>
In a system implementing the variable store in MM, there are no variable
arch protocol and variable write arch protocol installed into the
DXE_SMM protocol database. On such systems, it is not required to
locate these protocols by the DXE runtime variable drivers because
it can be assumed that these protocols are already installed in the
MM context. But then such an implementation will deviate from the
existing traditional MM based variable driver implementation.
So in order to maintain consistency with the traditional MM variable
driver implementation, allow platforms to install these protocols into
the DXE protocol database but these protocol will not be consumed
by non-secure variable service runtime driver.
The Platform which uses StandaloneMM based secure variable storage
have to include this library
Example
In edk2-platforms/Platform/ARM/SgiPkg/SgiPlatform.dsc
ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.inf {
<LibraryClasses>
NULL|StandaloneMmPkg/Library/VariableMmDependency/VariableMmDependency.inf
}
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jagadeesh Ujja <jagadeesh.ujja@arm.com>
Acked-by "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Driver was supporting only 32b DMA support for V3 controllers. Add
support for 64b DMA as well for completeness.
For V4.0 64b support, driver was looking at incorrect capability
register bit. Fix for that is present as well.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1583
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Tested-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
The current servers listed appear to be unusable. I suspect most
people will get correct DNS servers via DHCP, but the defaults
should work for anyone.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Rebecca Cran <rebecca@bluestop.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1135
For 4bit BMP, there are only 2^4 = 16 colors in the palette.
But when a corrupted BMP contains more than 16 colors in the palette,
today's implementation wrongly copies all colors to the local
PaletteValue[16] array which causes stack overflow.
The similar issue also exists in the logic to handle 8bit BMP.
The patch fixes the issue by only copies the first 16 or 256 colors
in the palette depending on the BMP type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1020
The Microcode region indicated by MicrocodePatchAddress PCD may contain
more than one Microcode entry. We should save InCompleteCheckSum32 value
for each payload. Move the logic for calculate InCompleteCheckSum32 from
the outsize of the do-while loop to the inside.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1576
The root cause of this issue is that non-stop mode of Heap Guard and
NULL Detection set TF bit (single-step) in EFLAG unconditionally in
the common handler in CpuExceptionLib.
If PcdCpuSmmStaticPageTable is FALSE, the SMM will only create page
table for memory below 4G. If SMM tries to access memory beyond 4G,
a page fault exception will be triggered and the memory to access
will be added to page table so that SMM code can continue the access.
Because of above issue, the TF bit is set after the page fault is
handled and then fall into another DEBUG exception. Since non-stop
mode of Heap Guard and NULL Detection are not enabled, no special
DEBUG exception handler is registered. The default handler just
prints exception context and go into dead loop.
Actually EFLAGS can be changed in any standard exception handler.
There's no need to do single-step setup in assembly code. So the fix
is to move the logic to C code part of page fault exception handler
so that we can fully validate the configuration and prevent TF bit
from being set unexpectedly.
Fixes: dcc026217f16b918bbaf
Test:
- Pass special test of accessing memory beyond 4G in SMM mode
- Boot to OS with Qemu emulator platform (Fedora27, Ubuntu18.04,
Windows7, Windows10)
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
* REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1577
In WiFi Connection Manager scan process, the result received
from WiFi device driver will be freed twice, and will cause
unexpected errors, and even system crash.
This issue also exists in some other places potentially, this
patch is to fix these issues and also add Timer Cancelling
before Close to avoid potential NULL reference.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=864
REF: CVE-2018-3630
To follow PI spec, ensure FfsFileHeader 8 bytes aligned.
For the integrity of FV(especially non-MemoryMapped FV) layout,
let CachedFv point to FV beginning, but not (FV + FV header).
And current code only handles (FwVolHeader->ExtHeaderOffset != 0) path,
update code to also handle (FwVolHeader->ExtHeaderOffset == 0) path.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
This reverts commit 838bc257ba.
After further evaluation, there are the unclear behavior in for the
driver combination feature. To not impact Q1 stable tag, remove it first.
1. If the drivers to be combined have the different PCD or library instance
setting, build should not combine them and report build break. But this
commit doesn't consider this case.
2. When start the sub driver fail, continue to start other sub driver. This
behavior is required to be clarifed in build spec.
3. Unload the sub driver when the combined driver start fail. This case need
to call the sub driver unload function for the driver start fail only.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
* V2
* Remove Arch dependency in Inf file
* Add a global guid for WiFi formset and set other guids to module levels
* Open supplicant and EapConfig by BY_DRIVER
* Remove token free function to avoid potential NULL reference
* Update WifiMgrUpdateConnectMessage() to only display message for Current Nic
* Fix the potential NULL reference in AIP call
* REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1492
Add WiFi Connection Manager in NetworkPkg to provide UI for users to scan
networks, connect or disconnect to networks.
This connection manager won't include the UNDI driver, supplicant driver,
or other device specific drivers and is therefor not a complete solution
stack for UEFI Wi-Fi, users can seek help for Wireless card vendors.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1521
We scan the SMM code with ROPgadget.
http://shell-storm.org/project/ROPgadget/https://github.com/JonathanSalwan/ROPgadget/tree/master
This tool reports the gadget in SMM driver.
This patch enabled CET ShadowStack for X86 SMM.
If CET is supported, SMM will enable CET ShadowStack.
SMM CET will save the OS CET context at SmmEntry and
restore OS CET context at SmmExit.
Test:
1) test Intel internal platform (x64 only, CET enabled/disabled)
Boot test:
CET supported or not supported CPU
on CET supported platform
CET enabled/disabled
PcdCpuSmmCetEnable enabled/disabled
Single core/Multiple core
PcdCpuSmmStackGuard enabled/disabled
PcdCpuSmmProfileEnable enabled/disabled
PcdCpuSmmStaticPageTable enabled/disabled
CET exception test:
#CF generated with PcdCpuSmmStackGuard enabled/disabled.
Other exception test:
#PF for normal stack overflow
#PF for NX protection
#PF for RO protection
CET env test:
Launch SMM in CET enabled/disabled environment (DXE) - no impact to DXE
The test case can be found at
https://github.com/jyao1/SecurityEx/tree/master/ControlFlowPkg
2) test ovmf (both IA32 and X64 SMM, CET disabled only)
test OvmfIa32/Ovmf3264, with -D SMM_REQUIRE.
qemu-system-x86_64.exe -machine q35,smm=on -smp 4
-serial file:serial.log
-drive if=pflash,format=raw,unit=0,file=OVMF_CODE.fd,readonly=on
-drive if=pflash,format=raw,unit=1,file=OVMF_VARS.fd
QEMU emulator version 3.1.0 (v3.1.0-11736-g7a30e7adb0-dirty)
3) not tested
IA32 CET enabled platform
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Fix CVE-2018-12178
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=809
The DNS driver only checks the received packet size against the
minimum DNS header size in DnsOnPacketReceived(), later it accesses
the QueryName and QuerySection beyond the header scope, which might
cause the pointer within DNS driver points to an invalid entry or
modifies the memory content beyond the header scope.
This patch is to fix above problem.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wang Fan <fan.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1134
Originally, the block size of created Ram disks is hard-coded to 512
bytes. However, if the total size of the Ram disk is not a multiple of 512
bytes, there will be potential memory access issues when dealing with the
last block of the Ram disk.
This commit will adjust the block size of the Ram disks to ensure that the
total size is a multiple of the block size.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
According to ARM Generic Interrupt Controller Architecture
Specification, GIC architecture version 3.0 and version 4.0,
GICD_IROUTER<n> is a 64-bit register.
Fixed code to use 64 bit MMIO write operations so that the
Aff3 value (bits [39:32]) is written to GICD_IROUTER<n>.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reported-by: Carl van Schaik <carl@cog.systems>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
LibGetTime():
- Two variables were used for the epoch, where only one should have been [*].
- Also harmonize variable name to match the one used in LibSetTime.
LibSetTime():
- Address possible underflows if time is set to start of epoch.
- Ensure that time being read does actually match time that was manually
set (plus the time elapsed since), by subtracting number of seconds
since reset.
[*] This fixes a build breakage, since one of these variables was set but
never used, triggering a compiler diagnostic at some optimization levels.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Steps:
1. Download edk2 tree
2. Build BaseTools
3. Go to edk2\BaseTools\Scripts\PackageDocumentTools
to run packagedoc_cli.py
An error occurs if relative imports are used when running
a file alone
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
FirmwareVolume.UnDispatchedFfsDict is mutated during iteration,
convert the FirmwareVolume.UnDispatchedFfsDict.keys() to a new list
to resolve this problem.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The Eot will report error when python3 enabled.
We replaced sdict with collections.OrderedDict in python3
patch set, but the sdict implement "append" method which is not
implemented in collections.OrderedDict.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Minor updates to comments and typo fixes. Also removed
unused structure CM_ARM_CPU_INFO_LIST.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
According to ACPI 6.2 Specification - Errata A, 'One,
and only one, GIC distributor structure must be present
in the MADT for an ARM based system'. Therefore,
the GIC Distributor ID field in the ACPI MADT GICD
substructure can be set to zero and there is no need
for the Configuration Manager to provide this information.
Update the CM_ARM_GICD_INFO structure to remove the GicId
field. Similarly update the MADT Generator to set the GicId
field in the GICD substructure to zero.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The DBG2_DEBUG_PORT_DDI() macro supports adding only one
Generic Base Address Register. Therefore, removed the
superfluous parameter NumReg and updated the macro to
use DBG2_NUMBER_OF_GENERIC_ADDRESS_REGISTERS which has
a value 1.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
Added option for OEMs to provide OEM Table ID and
OEM Revision for ACPI tables.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
Renamed the enum EArmObjIdMapping to EArmObjIdMappingArray
and updated the IORT generator accordingly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
Updated the Protocols section to reflect the protocols
that are produced or consumed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
Add support for 16550 UART to ACPI SPCR table as it is a
supported UART type by HLOS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The EFI_RETURN_STATUS_EXTENDED_DATA feature from PI-1.7
(<https://mantis.uefi.org/mantis/view.php?id=1885>) enables platform code
to learn about boot option failures (loading and launching) via status
codes reported by the UEFI Boot Manager.
In commit 59541d4163, we removed all status code support from
ArmVirtPkg. Reenable that support now, minimally, just to the extent so we
can benefit from the PI-1.7 feature mentioned above:
(1) Include the ReportStatusCodeRouterRuntimeDxe driver.
This driver produces two protocols, EFI_STATUS_CODE_PROTOCOL and
EFI_RSC_HANDLER_PROTOCOL. The former allows DXE phase modules and
runtime modules to report (produce) status codes. The latter allows
the same types of modules to register callbacks for status code
handling (consumption).
(Handler registration occurs only at boot time. Status codes are
delivered to each handler at runtime as well, unless the handler is
unregistered at ExitBootServices().)
(2) Resolve ReportStatusCodeLib to a non-Null instance, for DXE_DRIVER
modules only. This way DXE_DRIVER modules that use the
REPORT_STATUS_CODE_EX() macro and friends will reach
EFI_STATUS_CODE_PROTOCOL from point (1).
(3) Set PcdReportStatusCodePropertyMask to 3 (the default value is 0).
This causes the REPORT_STATUS_CODE_EX() macro and friends to let
Progress Codes (bit#0) and Error Codes (bit#1) through to point (1).
Debug Codes (bit#2) are filtered out.
(4) Include no driver, for now, that registers any status code handler via
EFI_RSC_HANDLER_PROTOCOL, from point (1). Status codes that reach
ReportStatusCodeRouterRuntimeDxe will be thrown away.
(5) Modify only the ArmVirtQemu* platforms. A status code handler will
be added to "ArmVirtPkg/Library/PlatformBootManagerLib" in the next patch,
and this library instance is not consumed by ArmVirtXen.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1515418
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Introduce the Platform Boot Manager Print Status Code Library (for short,
PlatformBmPrintScLib) class for catching and printing the LoadImage() /
StartImage() preparations, and return statuses, that are reported by
UefiBootManagerLib.
In the primary library instance, catch only such status codes that
UefiBootManagerLib reports from the same module that contains
PlatformBmPrintScLib. The intent is to establish a reporting-printing
channel within BdsDxe, between UefiBootManagerLib and
PlatformBmPrintScLib. Ignore status codes originating elsewhence, e.g.
from UiApp's copy of UefiBootManagerLib.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1515418
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In the EFI_RETURN_STATUS_EXTENDED_DATA structure from PI-1.7, there may be
padding between the DataHeader and ReturnStatus members. The
REPORT_STATUS_CODE_EX() macro starts populating the structure immediately
after DataHeader, therefore the source data must provide for the padding.
Extract the BmReportLoadFailure() function from EfiBootManagerBoot(),
prepare a zero padding (if any) in a temporary
EFI_RETURN_STATUS_EXTENDED_DATA object, and fix the
REPORT_STATUS_CODE_EX() macro invocation.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Star Zeng <star.zeng@intel.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1539
Fixes: c2cf8720a5
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1474
Within UfsBlockIoPei, the current implementation of the Block IO(2)
services:
UfsBlockIoPeimGetMediaInfo
UfsBlockIoPeimReadBlocks
UfsBlockIoPeimGetMediaInfo2
UfsBlockIoPeimReadBlocks2
does not handle the input parameter 'DeviceIndex' properly.
According to both of the PI spec and the function description comments:
> DeviceIndex Specifies the block device to which the function wants
> to talk. ... This index is a number from one to
> NumberBlockDevices.
But current codes incorrectly treat the valid range of 'DeviceIndex' as 0
to (NumberBlockDevices - 1).
This commit is to address this issue.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
If the input parameter AsciiString length is greater
than 255, the GenFv will hang.
This patch is to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
If the WORKSPACE environment variable has been set,The variables that
control stable sorting will not be set.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
When define [DEPEX] in lib inf to build, it will fail and report"
gUefiOvmfPkgTokenSpaceGuid.test1 used in [Depex] section should be
used as FixedAtBuild type and VOID* datum type in the module."
But we define this PCD to FixedAtBuild type and VOID* datum type indeed.
DEC:
[PcdsFixedAtBuild]
gUefiOvmfPkgTokenSpaceGuid.test1 |
{GUID("4096267b-da0a-42eb-b5eb-fef31d207cb4")}|VOID*|0x3c
DSC:
add pcd under lib inf as below:
NULL|TestPkg/TestLib/TestLib.inf
<PcdsFixedAtBuild>
gUefiOvmfPkgTokenSpaceGuid.test1 | {GUID(gUefiOvmfPkgTokenSpaceGuid)}
Lib inf:(TestPkg/TestLib/TestLib.inf)
[Depex]
gUefiOvmfPkgTokenSpaceGuid.test1
[FixedPcd]
gUefiOvmfPkgTokenSpaceGuid.test1
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1544
1) The GenC tool does not include the constructor/destructor for
USER_DEFINED module. It should be included.
Only constructor/destructor with BASE type is included here.
The constructor/destructor with PEI/DXE/SMM type is still excluded
to keep original behavior.
2) The GenC tool includes the UnloadImage code for BASE module.
It should NOT be included.
3) The GenC tool uses EFI_STATUS and ASSERT_EFI_ERROR for BASE type.
It should use RETURN_STATUS and ASSERT_RETURN_ERROR.
4) The GenC tool miss DebugLib.h for BASE or USER_DEFINED module
AutoGen.c. Only Base.h is there. It should add Library/DebugLib.h.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1529
This commit will add the 'Security feature set' support for ATA devices.
According to the AT Attachment 8 - ATA/ATAPI Command Set (ATA8-ACS)
specification, the Security feature set is an optional feature. In
summary, the feature is a password system that restricts access to user
data stored on an ATA device. A more detailed introduction of this feature
can be referred from the ATA8-ACS spec.
The HddPassword driver is composed of 2 parts:
* A DXE driver and
* A PEI driver
The DXE driver consumes EFI_ATA_PASS_THRU_PROTOCOL instances and installs
an HII GUI to manage the devices. If the managing device supports Security
feature set, the HII page will provide the user with the ability to
set/update/disable the password for this device. Also, if a password is
being set via the Security feature set, a popup window will show during
boot requesting the user to input password.
Another feature supported by this driver is that for those managing
devices with password set, they will be automatically unlocked during the
S3 resume. This is done by the co-work of the DXE driver and the PEI
driver:
The DXE driver will save the password and the identification information
for these devices into a LockBox, which is only allowed to restore during
S3 resume.
The PEI driver, during S3 resume, will restore the content in the LockBox
and will consume EDKII_PEI_ATA_PASS_THRU_PPI instances to unlock devices.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
For the current implementation of OpalPassword drivers, it has a feature
to support devices being automatically unlocked in the S3 resume. For this
feature, two types of devices are supported:
* ATA hard disks working under AHCI mode
* NVM Express devices
The support of this feature requires the above 2 types of device to be
initialized at the PEI phase during S3 resume, which is done by the
co-work of the OpalPasswordDxe driver and the OpalPasswordPei driver.
More specifically, the OpalPasswordDxe will handle:
* Pre-allocate MMIO resource and save it in a driver internal LockBox for
OpalPasswordPei to retrieve;
* Save the PCI configuration space of ATA controllers into boot script.
Meanwhile, the OpalPasswordPei will handle:
* Rely on the boot script for the PCI configuration space program of ATA
controllers;
* Restore the driver internal LockBox to get the MMIO resource;
* Complete the PCI configuration space program for ATA and NVME
controllers;
* Initialize ATA and NVME controllers and devices.
This commit will remove these hardware initialization related codes from
the OpalPassword drivers. The hardware initialization will be covered by
PEI storage device drivers (e.g. NvmExpressPei & AhciPei in the
MdeModulePkg).
After such codes removal, the OpalPasswordDxe will only handle:
* Construct/update the S3StorageDeviceInitList LockBox with the managing
ATA and NVME devices.
And the OpalPasswordPei will only handle:
* Locate Storage Security Command PPI instances to perform the device
automatic unlock during the S3 resume.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The previous commit:
MdeModulePkg/SmmLockBoxLib: Support LockBox enlarge in UpdateLockBox()
adds the support to enlarge a LockBox when using the LockBoxLib API
UpdateLockBox().
This commit is to sync the API description comment of UpdateLockBox() with
its counterparts in MdeModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This commit is out of the scope for BZ-1409. It is a refinement for the
PEI library instance within SmmLockBoxLib.
For the below ASSERT statement within function RestoreLockBox():
Status = SmmCommunicationPpi->Communicate (
SmmCommunicationPpi,
&CommBuffer[0],
&CommSize
);
if (Status == EFI_NOT_STARTED) {
//
// Pei SMM communication not ready yet, so we access SMRAM directly
//
DEBUG ((DEBUG_INFO, "SmmLockBoxPeiLib Communicate - (%r)\n", Status));
Status = InternalRestoreLockBoxFromSmram (Guid, Buffer, Length);
LockBoxParameterRestore->Header.ReturnStatus = (UINT64)Status;
if (Length != NULL) {
LockBoxParameterRestore->Length = (UINT64)*Length;
}
}
ASSERT_EFI_ERROR (Status);
It is possible for previous codes to return an error status that is
possible for happen. One example is that, when the 'if' statement
'if (Status == EFI_NOT_STARTED) {' is entered, function
InternalRestoreLockBoxFromSmram() is possible to return 'BUFFER_TOO_SMALL'
if the caller of RestoreLockBox() provides a buffer that is too small to
hold the content of LockBox.
Thus, this commit will remove the ASSERT here.
Please note that the current implementation of RestoreLockBox() is
handling the above-mentioned error case properly, so no additional error
handling codes are needed here.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This commit is out of the scope for BZ-1409. It is a coding style
refinement for the SmmLockBoxLib.
More specifically, the commit will remove all the debug message display
level macros starting with 'EFI_D_' and replace them with macros starting
with 'DEBUG_'.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
This commit will add the AHCI mode ATA device support in the PEI phase.
More specifically, the newly add AhciPei driver will consume the ATA AHCI
host controller PPI for ATA controllers working under AHCI code within the
system. And then produces the below PPIs for each controller:
EDKII PEI ATA PassThru PPI
Storage Security Command PPI
Also, the driver will consume the S3StorageDeviceInitList LockBox in S3
phase. The purpose is to perform an on-demand (partial) ATA device
enumeration/initialization on each controller to benefit the S3 resume
performance.
The implementation of this driver is currently based on the below
specifications:
Serial ATA Revision 2.6
Serial ATA Advanced Host Controller Interface (AHCI) 1.3.1
AT Attachment with Packet Interface - 6 (ATA/ATAPI-6)
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
For the NvmExpressPei driver, this commit will update the driver to
consume the S3StorageDeviceInitList LockBox in S3 phase. The purpose is to
perform an on-demand (partial) NVM Express device
enumeration/initialization to benefit the S3 resume performance.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This commit is out of the scope for BZ-1409. The commit will remove the
call of RegisterForShadow() at the entry point of the driver. By doing so,
the driver is now possible to be executed without being re-loaded into
permanent memory.
Thus, this commit will update the NvmExpressPei driver to avoid updating
the content of a global variable.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
This commit will add the GUID definitions for LockBox which is used to
save a list of storage devices that need to get initialized during the S3
resume.
The content of the LockBox will be a DevicePath structure that contains
zero or more DevicePath instances. Each instance denotes a storage device
that needs to get initialized during the S3 resume.
The producers of the content of this LockBox will be drivers like
OpalPassword DXE driver. This kind of drivers requires some specific
storage devices to be initialized during the PEI phase of in S3 resume.
(For the OpalPassword case, it requires the managing devices to be
automatically unlocked during the S3 resume).
The attribute of the LockBox should be set to
LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY.
The consumers of the content of this LockBox will be PEI storage device
controller/bus drivers (e.g. NvmExpressPei) during S3 resume. This kind of
drivers can use the DevicePath instances stored in the LockBox to get a
list of devices that need to get initialized. In such way, an on-demand
(partial) device enumeration/initialization can be performed to benefit
the S3 resume performance.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@Intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
This commit will add the definitions for Storage Security Command (SSC)
PPI. This PPI will be be used to abstract mass storage devices to allow
code running in the PEI phase to send security protocol commands to mass
storage devices without specific knowledge of the type of device or
controller that manages the device.
More specifically, the PPI will provide services to:
* Get the number of mass storage devices managed by a instance of the SSC
PPI (by service 'GetNumberofDevices');
* Get the identification information (DevicePath) of a managing mass
storage devices (by service 'GetDevicePath');
* Send security protocol commands to mass storage devices (by services
'ReceiveData' and 'SendData').
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
This commit will add the definitions for EDKII PEI ATA PassThru PPI. This
PPI will provide services that allow ATA commands to be sent to ATA
devices attached to an ATA controller in the PEI phase.
More specifically, the PPI will provide services to:
* Send ATA commands to an ATA device (by service 'PassThru');
* Get the list of the attached ATA device on a controller (by services
'GetNextPort' and 'GetNextDevice');
* Get the identification information (DevicePath) of the underlying ATA
host controller (by service 'GetDevicePath').
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
This commit will add the definitions for ATA AHCI host controller PPI. The
purpose of the PPI in to provide:
* MMIO base address
* Controller identification information (DevicePath)
for ATA host controllers working under AHCI mode.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
I don't watch much my Linaro e-mail anymore. So update my e-mail address
from Linaro to the Arm one.
Contributed-under: Tianocore Contribution Agreement 1.1
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1020
The following Microcode payload format is define in SDM spec.
Payload: |MicrocodeHeader|MicrocodeBinary|ExtendedHeader|ExtendedTable|.
When we verify the CheckSum32 with ExtendedTable, we should use the fields
of ExtendedTable to replace corresponding fields in MicrocodeHeader,
and then calculate the CheckSum32 with MicrocodeHeader+MicrocodeBinary.
This patch already verified on ICL platform.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1511
Currently the TCG config setup form defaults the physical presence action to
PHYSICAL_PRESENCE_ENABLE, this prevents the action from being called. When a TPM
1.2 device is in Disabled and Activated state it is not possible to issue the
PHYSICAL_PRESENCE_ENABLE using the menu action.
By having the form default to PHYSICAL_PRESENCE_NO_ACTION, the user is now able
to select PHYSICAL_PRESENCE_ENABLE and toggle the TPM 1.2 device enable state.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Rodrigo Gonzalez del Cueto <rodrigo.gonzalez.del.cueto@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Defined 2 PCDs(Test4 & Test401) and 2 SKUs(DEFAULT & _),
then set "SKUID_Defines" to ALL, for FixedAtBuild
gEfiStructuredPcdPkgTokenSpaceGuid. Test401 in this case,
its value should get from "Default" SKU, not from "_" SKU,
but we does not set value in SKU "_" in dsc, so Test401
should only display the value get from dec.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
With Python3, the dict.value() method returns an iterator.
If a dictionary is updated while an iterator on its keys is used,
a RuntimeError is generated.
Converting the iterator to a list() forces a copy of the mutable
keys in an immutable list which can be safely iterated.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1520
To save the image size without the compression, more than
one drivers can be combined into single one. When more than
one drivers are combined, their depex will be AND together.
Below is the example to combine BootManagerPolicyDxe into
DriverHealthManagerDxe.
Besides this patch, BaseTools also needs to check the module
type and make sure all module type are same. Otherwise,
BaseTools will report the error.
DRIVER INF has the parameter ENTRY_POINT
LIBRARY INF has the parameter LIBRARY_CLASS
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
externals.txt is to refer to the binary Win32. It is not used any longer.
BuildNotes.txt is to freeze BaseTools python. It is not used any longer.
BinaryFiles.txt is to list the file in Bin directory. But, Bin dir is empty.
building-gcc.txt and gcc is for mingw-gcc. It is not used any longer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1533
When SecCore and PeiCore in different FV, current
implementation still assuming SecCore and PeiCore are in
the same FV.
To fix this issue 2 FVs will be input parameters for
FindAndReportEntryPoints () and SecCore and PeiCore will
be found in each FV and correct debug information will
be reported.
Test: Booted with internal platform successfully.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1537
Use 16-bit and 32-bit IO widths for SDMMC MMIO to prevent all register
accesses from being split up into 8-bit accesses.
The SDHCI specification states that the registers shall be accessible in
byte, word, and double word accesses. (SD Host Controller Simplified
Specification 4.20 Section 1.2)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1140
In eMMC HS400 switch sequence flow eMMC driver attempted
to execute SEND_STATUS just after switching bus timing to high
speed and before downgrading clock frequency to 52MHz. Since link
was at that time in incorrect state SEND_STATUS was failing which
made driver think switch to HS400 failed.
This change makes driver always change clock frequency after
switching bus timing and before executing SEND_STATUS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Albecki Mateusz <mateusz.albecki@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
For example, PCD gUefiOvmfPkgTokenSpaceGuid.Test001 datatype is Array:
TEST1[2]
and the filed TEST1UINT64ARRAY in TEST1 is also an array:
UINT64 TEST1UINT64ARRAY[2];
Then the following filed assignment in DSC will cause build failure.
gUefiOvmfPkgTokenSpaceGuid.Test001[0].TEST1UINT64ARRAY|{'A','B'}
The root cause is build tool generate incorrect PcdValueInit.c File.
This patch is going to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
If there are multiple sku used in a platform and
gEfiMdeModulePkgTokenSpaceGuid.PcdNvStoreDefaultValueBuffer PCD
is used, build will fail.
This is a regression issue introduced by the commit:
5695877ec8 which only update the
Vpd offset for default SKU but not other SKUs.
This patch is going to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In ParseDevPathValue, the binary data need to convert to string
for python3 and python2 compatiblity.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
MaxSizeUserSet is missing in Pcd deepcopy function.
This patch is to add it back to Pcd deepcopy function.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The IORT generator uses the configuration manager protocol
to obtain information about the PCI Root Complex, SMMU,
GIC ITS, Performance Monitoring counters etc. and generates
the IORT table.
The mappings between the components are represented using
tokens. The generator invokes the configuration manager
protocol interfaces and requests for objects referenced by
tokens to establish the link.
This table data is then used by the Table Manager to install
the IORT table.
The Table Manager then invokes the generator interface to free
any resources allocated by the IORT table generator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The MCFG generator uses the configuration manager protocol
to obtain the PCI Configuration space information from the
platform configuration manager and builds the MCFG table.
This table data is then used by the Table Manager to install
the MCFG table.
The Table Manager then invokes the generator interface to free
any resources allocated by the MCFG table generator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The DBG2 generator uses the configuration manager protocol
to obtain the debug serial port information from the platform
configuration manager. It then updates a template DBG2 table
structure. This table data is used by the Table Manager to
install the DBG2 table.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The SPCR generator uses the configuration manager protocol to
obtain the serial port information from the platform configuration
manager. It then updates a template SPCR table structure. This
table data is used by the Table Manager to install the SPCR table.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The GTDT generator uses the configuration manager protocol to
obtain information about the architectural and platform timers
available on the platform and generates the ACPI GTDT table.
This table data is then used by the Table Manager to install
the GTDT table.
The Table Manager then invokes the generator interface to free
any resources allocated by the GTDT table generator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The MADT generator uses the configuration manager protocol to
obtain information about the Arm interrupt controllers (GICC,
GICD, etc.) and generates the ACPI MADT table. This table data
is then used by the Table Manager to install the MADT table.
The Table Manager then invokes the generator interface to free
any resources allocated by the MADT table generator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The FADT generator collates the relevant information required
for generating a FADT table from configuration manager using
the configuration manager protocol. It then updates a template
FADT table structure. This table data is used by the Table
Manager to install the FADT table.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
A Raw generator is a simple generator. This generator provides
the ability to install a binary blob (that contains ACPI table
data) as an ACPI table. The binary blob could be pre-generated
ACPI table data or it may be the pre-compiled output from an
iAsl compiler for a DSDT or SSDT table.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The dynamic table manager implements the top level component
that drives the table generation and installation process.
It uses the configuration manager protocol to get the list
of tables to be installed from the configuration manager.
It iterates through the list of tables, requests the table
factories for corresponding generators and invokes the
generator interface to build the tables.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The dynamic table factory dxe implements the dynamic table
factory protocol. It also implements the ACPI, SMBIOS and
DT table factories. The table generators register themselves
with the respective table factories and the factories are
responsible for instantiating instances of the generators
to build the firmware tables.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This patch introduces the dynamic table factory protocol
that provides an interface to register and retrieve
registered generators.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
A helper library that implements common functionality
for use by table generators.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This patch defines a helper macro 'GET_OBJECT_LIST()' that
expands to a function that uses the configuration manager
protocol to retrieve configuration manager object(s).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
Introduce configuration manager protocol interface
that is used by the dynamic tables framework core
to communicate with configuration manager.
Configuration manager is a platform specific module
that implements the configuration manager protocol.
Table generators use this interface to retrieve the
hardware information from the configuration manager.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The dynamic tables frameworks core communicates with the
platform specific implementation using the configuration
manager protocol interface. The dynamic tables framework
core uses this interface to retrieve information required
for generating the firmware tables. This information is
represented in the form of objects, which are classified
as standard namespace objects, Arm namespace objects or
as Custom/OEM namespace objects.
The configuration manager objects provides a convenient
way for wrapping up the namespaces using a well defined
configuration manager object Id.
The configuration manager is a platform specific component
that collates the platform information required for generating
firmware tables and represents them as configuration manager
objects.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The dynamic tables frameworks core communicates with the
platform specific implementation using the configuration
manager protocol interface. The dynamic tables framework
core uses this interface to retrieve information required
for generating the firmware tables. This information is
represented in the form of objects, which are classified
as standard namespace objects, Arm namespace objects or
as Custom/OEM namespace objects.
This patch introduces the definitions for the Arm namespace
objects.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The dynamic tables frameworks core communicates with the
platform specific implementation using the configuration
manager protocol interface. The dynamic tables framework
core uses this interface to retrieve information required
for generating the firmware tables. This information is
represented in the form of objects, which are classified
as standard namespace objects, Arm namespace objects or
as Custom/OEM namespace objects.
This patch introduces the definitions for standard
namespace objects.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This patch introduces the interfaces and definitions for
implementing a Device Tree table generator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This patch introduces the required interfaces and definitions
for implementing a SMBIOS table generator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This patch introduces the required interfaces and definitions
for implementing an ACPI table generator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
A Table generator is a component that implements the logic
for building a firmware table. This is typically implemented
as a library and registers itself with a table factory.
Table generators are further classified based on type of table
it generates, a namespace that signifies if the implementation
is standard or an OEM specific implementation and a table Id.
This patch introduces the definitions used for describing a
table generator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The dynamic tables framework is designed to generate standardised
firmware tables that describe the hardware information at
run-time. A goal of standardised firmware is to have a common
firmware for a platform capable of booting both Windows and Linux
operating systems.
Traditionally the firmware tables are handcrafted using ACPI
Source Language (ASL), Table Definition Language (TDL) and
C-code. This approach can be error prone and involves time
consuming debugging.
In addition, it may be desirable to configure platform hardware
at runtime such as: configuring the number of cores available
for use by the OS, or turning SoC features ON or OFF.
This patch introduces Dynamic Tables Framework which also provides
mechanisms to reduce the amount of effort required in porting
firmware to new platforms. A more detailed description is in
the Readme.md file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The check for 1.[1-9][0-9].* was removed since qemu jumped to 2.0
after 1.7.
Changed 2.*.* to [2-9].*.* to match major releases 3 - 9.
Added [1-9][0-9]*.*.* to match major releses >= 10.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1481
Today's MtrrLib contains a bug, for example:
when the original cache setting is WB for [0xF_0000, 0xF_8000) and,
a new request to set [0xF_0000, 0xF_4000) to WP,
the cache setting for [0xF_4000, 0xF_8000) is reset to UC.
The reason is when MtrrLibSetBelow1MBMemoryAttribute() is called the
WorkingFixedSettings doesn't contain the actual MSR value stored in
hardware, but when writing the fixed MTRRs, the code logic assumes
WorkingFixedSettings contains the actual MSR value.
The new fix is to change MtrrLibSetBelow1MBMemoryAttribute() to
calculate the correct ClearMasks[] and OrMasks[], and use them
directly when writing the fixed MTRRs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1114
V2: simplify the code logic.
update
if (!mHaveExitedBootServices &&
(StatusCodeData != (EFI_STATUS_CODE_DATA *) StatusCodeBuffer)) {
gBS->FreePool (StatusCodeData);
}
to
if (StatusCodeData != (EFI_STATUS_CODE_DATA *) StatusCodeBuffer) {
gBS->FreePool (StatusCodeData);
}
V3:
And the code below into the else condition (stack buffer is not enough)
in /DxeReportStatusCodeLib/ReportStatusCodeLib.c
if (gBS == NULL || gBS->AllocatePool == NULL || gBS->FreePool == NULL) {
return EFI_UNSUPPORTED;
}
V4:
Refine code logic.
When report status code with ExtendedData data,
and the extended data can fit in the local static buffer,
there is no need to use AllocatePool to hold the ExtendedData data.
This patch is just to do the enhancement to avoid using AllocatePool.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
If use a structure pcd in fdf, build tool crash
This is a regression issue introduced by py3 patch set.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Generate report fail when -Y EXECUTION_ORDER in build command.
This patch is going to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This is designed to be used on platforms where a a real RTC is not
available and relies on an RtcEpochSeconds variable having been set or,
if that is not the case, falls back to using the epoch embedded at
compilation time.
Note that, in order to keep things simple for the setting of the
compilation time variable, only GCC environments with UNIX-like shells
and where a 'date' command is available are meant to be supported for
now.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1505
When a device under PPB contains option ROM but doesn't require 32bit
MMIO, ProgrameUpstreamBridgeForRom() cannot correctly restore the
PPB MEM32 RANGE BAR. It causes the 32bit MMIO conflict which may
cause system hangs in boot.
The root cause is when ProgrameUpstreamBridgeForRom() calls
ProgramPpbApperture() to restore the PPB MEM32 RANGE BAR, the
ProgramPpbApperture() skips to program the BAR when the resource
length is 0.
This patch fixes this issue by not calling ProgramPpbApperture().
Instead, it directly programs the PPB MEM32 RANGE BAR.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Per PCI Spec, the option ROM BAR is 32bit so the maximum option ROM
size can be hold by UINT32 type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
This issue is caused by FileInfoBuffer variable. This is a pointer array
and each elements also pointer to a memory buffer that is allocated and
returned by AllocateCopyPool function.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x {Xen} x {DEBUG,NOOPT,RELEASE} x {feat-1}
(6 builds in total), PcdOptionRomImageVerificationPolicy,
PcdFixedMediaImageVerificationPolicy, and
PcdRemovableMediaImageVerificationPolicy are not used in any of those
builds.
Restrict the settings to the ArmVirtQemu and ArmVirtQemuKernel platforms
(preserving the -D SECURE_BOOT_ENABLE restriction in the process).
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x {Xen} x {DEBUG,NOOPT,RELEASE} x {feat-0,feat-1}
(12 builds in total), the PCD is not used in any of those builds. Restrict
the setting to the ArmVirtQemu and ArmVirtQemuKernel platforms.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x {Xen} x {DEBUG,NOOPT,RELEASE} x {feat-0,feat-1}
(12 builds in total), the PCD is not used in any of those builds. Remove
the setting.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x {Xen} x {DEBUG,NOOPT,RELEASE} x {feat-0,feat-1}
(12 builds in total), the PCD is not used in any of those builds.
Restrict the setting to the ArmVirtQemu and ArmVirtQemuKernel platforms.
Restrict the TTY_TERMINAL define similarly.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x {Xen} x {DEBUG,NOOPT,RELEASE} x {feat-0,feat-1}
(12 builds in total), the PCD is not used in any of those builds. Remove
the setting.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x {Qemu,QemuKernel,Xen} x {RELEASE} x {feat-0,feat-1}
(12 builds in total), the PCD is not used in any of those builds. Restrict
the PCD setting to ($(TARGET) != RELEASE).
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x {Qemu,QemuKernel,Xen} x {RELEASE} x {feat-0,feat-1}
(12 builds in total), the PCD is not used in any of those builds.
Rather than just restrict the PCD setting to ($(TARGET) != RELEASE),
remove the setting completely. The current value is identical to the 0xAF
default in "MdePkg/MdePkg.dec", which recognizes Andrew Fish, and so it's
unlikely to ever change.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x
{Qemu,QemuKernel,Xen} x
{DEBUG,NOOPT,RELEASE} x
{feat-0,feat-1}
(36 builds in total), the PCD is not used in any of those builds. Remove
the setting.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The PcdCoreCount dependency in the "ArmVirtPrePiUniCoreRelocatable.inf"
file is false; the module doesn't consume the PCD. Clean up the INF.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x
{QemuKernel,Xen} x
{DEBUG,NOOPT,RELEASE} x
{feat-0,feat-1}
(24 builds in total), the PCD is not used in any of those builds.
Move the setting from "ArmVirt.dsc.inc" to "ArmVirtQemu.dsc", to reflect
reality.
We originally moved the PCD setting in the opposite direction in commit
8aab575c26 ("ArmVirtPkg: enable non-executable DXE stack for all
platforms", 2017-03-07), generalizing it. However, as the comment itself
states, and according to all 36 ArmVirt build reports:
{AARCH64,ARM} x
{Qemu,QemuKernel,Xen} x
{DEBUG,NOOPT,RELEASE} x
{feat-0,feat-1}
the PCD is only consumed by "MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf", and
that module is only included in the ArmVirtQemu platform.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x
{Qemu,QemuKernel,Xen} x
{DEBUG,NOOPT,RELEASE} x
{feat-0,feat-1}
(36 builds in total), the PCD is not used in any of those builds. Remove
the setting.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x
{Qemu,QemuKernel} x
{DEBUG,NOOPT,RELEASE} x
{feat-0,feat-1}
(24 builds in total), the PCD is not used in any of those builds. Remove
the setting.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x
{Qemu,QemuKernel,Xen} x
{DEBUG,NOOPT,RELEASE} x
{feat-0,feat-1}
(36 builds in total), the PCD is not used in any of those builds. Remove
the setting.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x {QemuKernel} x {DEBUG,NOOPT,RELEASE} x {feat-0,feat-1}
(12 builds in total), the PCD is not used in any of those builds. Remove
the setting.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1408
According to the information of the above BZ-1408 and other platform
owners, NVM Express devices are becoming more likely to be a critical
part during the boot process.
This commit will add the calls to 'REPORT_STATUS_CODE' when there is a
failure happens during the NVM Express controller/device initialization
process.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <brbarkel@microsoft.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Replace the dummy C implementation of SpeculationBarrier() with
implementations consisting of the recommended DSB SY + ISB sequence,
as recommended by ARM in the whitepaper "Cache Speculation Side-channels"
version 2.4, dated October 2018.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Fix various typos in CorebootModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Coeur <coeur@gmx.fr>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
Fix various typos in CorebootPayloadPkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Coeur <coeur@gmx.fr>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
This patch adds the TCG2 Configuration menu to the Device Manager
menu. We can apparently reuse the sample Tcg2ConfigDxe from
SecurityPkg/Tcg/Tcg2Config without obvious adverse effects. The
added TCG2 Configuration menu now shows details about the attached
TPM 2.0 and lets one for example configure the active PCR banks
or issue commands, among other things.
The code is added to Ovmf by building with -DTPM2_ENABLE and
-DTPM2_CONFIG_ENABLE.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
With Python3, the dict.value() method returns an iterator.
If a dictionary is updated while an iterator on its keys is used,
a RuntimeError is generated.
Converting the iterator to a list() forces a copy of the mutable
keys in an immutable list which can be safely iterated.
Commit f8d11e5a4a converted various uses but missed one:
When specifying multiple BUILDTARGET, the first target builds
successfully, but then the PGen.BuildDatabase._CACHE_ dictionary is
updated, and accessing the next target triggers a RuntimeError.
Convert this iterator to an immutable list, to solve this build error:
$ build -a IA32 -t GCC5 -b RELEASE -b NOOPT -p OvmfPkg/OvmfPkgIa32.dsc
[...]
Processing meta-data ...
build.py...
: error C0DE: Unknown fatal error when processing [OvmfPkg/OvmfPkgIa32.dsc]
(Please send email to edk2-devel@lists.01.org for help, attaching following call stack trace!)
(Python 3.5.3 on linux) Traceback (most recent call last):
File "BaseTools/BinWrappers/PosixLike/../../Source/Python/build/build.py", line 2387, in Main
MyBuild.Launch()
File "BaseTools/BinWrappers/PosixLike/../../Source/Python/build/build.py", line 2141, in Launch
self._MultiThreadBuildPlatform()
File "BaseTools/BinWrappers/PosixLike/../../Source/Python/build/build.py", line 1921, in _MultiThreadBuildPlatform
self.Progress
File "BaseTools/Source/Python/AutoGen/AutoGen.py", line 304, in __init__
self._InitWorker(Workspace, MetaFile, Target, Toolchain, Arch, *args, **kwargs)
File "BaseTools/Source/Python/AutoGen/AutoGen.py", line 477, in _InitWorker
for BuildData in PGen.BuildDatabase._CACHE_.values():
RuntimeError: dictionary changed size during iteration
Note: The culprit commit (f8d11e5a4a) can not be found with bisection.
In 9c2d68c0a2 the build tools default to the python version provided
by the ${PYTHON} environment variable, however the Python3 transition is
not functional before d943b0c339. f8d11e5a4a falls between the
previous two.
Reported-by: Leif Lindholm <leif.lindholm@linaro.org>
Fixes: f8d11e5a4a
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The goal of commit 97c8f5b9e7 ("BaseTools:StructurePCD value display
incorrect in "Not used" section.", 2019-02-02) was to display the full
contents of such structure PCDs in the build report that were set in the
platform DSC or the FDF, but not used in any module INFs. The listings
would appear in the
PCDs not used by modules or in conditional directives
section of the build report.
Commit 97c8f5b9e7 assumed that any (platform, architecture) combination
would have a (possibly empty) set of structure PCD (and so the set of the
structure PCDs could be filtered for set-but-unused ones).
This is not the case: in "DscBuildData.py", in method
UpdateStructuredPcds(), if "S_pcd_set" remains an empty OrderedDict(),
then it is not added to "GlobalData.gStructurePcd" *at all*, for the
current (platform, architecture) combination.
As a result, when the PCD report tries to fetch the set of structure PCDs
for the current (platform, architecture), "GlobalData.gStructurePcd" does
not return an empty OrderedDict(); instead, it raises a KeyError. Fix it
by defaulting to an empty OrderedDict(), with the get() method.
Reported-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1513
Fixes: 97c8f5b9e7
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
This package is used by several platforms in edk2-platforms, so ensure it
can be built directly by adding AARCH64/ARM to SUPPORTED_ARCHITECTURES.
Also force-include CompilerIntrinsicsLib, BaseStackCheckLib and create a
resolution for ArmSoftFloatLib for ARM.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: jiewen.yao@intel.com
The CompilerIntrinsicsLib and BaseStackCheckLib need to be included in
order for an ARM build of the package .dsc to succeed - so add them.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: jiewen.yao@intel.com
Contrary to what the name suggests, some modules in this package are used
on other architecture. ARM is already listed in SUPPORTED_ARCHITECTURES
in the .dsc, but AARCH64 was never added - so do that.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Contrary to what the name suggests, some modules in this package are used
on other architecture. ARM is already listed in SUPPORTED_ARCHITECTURES
in the .dsc, but AARCH64 was never added.
Add that, and force inclusion of CompilerIntrinsicsLib and
BaseStackCheckLib for AARCH64/ARM to make the build successful.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The WebServer application is not meant to be Ia32/X64 specific, and would
build for other architectures, if it wasn't for the
#include <Register/Msr.h>
in WebServer.h. Move that statement to Mtrr.c instead, which is the only
consumer, and is already being filtered out for other architectures.
Cc: Daryl McDaniel <edk2-lists@mc2research.org>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
To avoid potential NULL pointer dereference issue. Initialize them at
the beginning of the function.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Uninitialized pointer variable may randomly point to a block of memory.
In This case, FreePool function will free a block of memory that is not
belongs to this function.
Cc: Ruiyu Ni <ray.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
StructurePCD value display incorrect in "Not used" section,
that the value defined in structure does not show.
StructurePCD will not display in "Not Used" section if
main structure not define in dsc and pcd not in inf
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Add a new type of exception for function body checkpoint.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hess.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Defined 2 PCDs(Test4 & Test401) and 2 SKUs(DEFAULT & _),
then set "SKUID_Defines" to ALL, for FixedAtBuild
gEfiStructuredPcdPkgTokenSpaceGuid. Test401 in this case,
its value should get from "Default" SKU, not from "_" SKU,
but we does not set value in SKU "_" in dsc, so Test401
should only display the value get from dec.
Missing the map() function causes SKU specific items to
not be deleted
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Update header file function name for FfsFindFileByName to match
implementation function name.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
v2:
The python files under CParser4 are generated by antlr4 and for
python3 usage. They have python3 specific syntax, for example
the data type declaration for the arguments of a function. That
is not compitable with python2. this patch is to remove these syntax.
Eot tool Python3 adaption.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
v2:
The python files under CParser4 are generated by antlr4 and for
python3 usage. They have python3 specific syntax, for example
the data type declaration for the arguments of a function. That
is not compitable with python2. this patch is to remove these syntax.
ECC tool Python3 adaption.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1493
Pkcs7GetAttachedContent() implementation in current CryptPkcs7Verify.c
is actually shared by RuntimeCryptLib.inf, SmmCryptLib.inf and
BaseCryptLib.inf, which are not correct since there's no use scenario
for runtime and AllocatePool() used in this method can only be called
in boot time.
This patch fix this issue by splitting file CryptPkcs7Verify.c into 3 parts.
CryptPkcs7VerifyCommon.c (shared among Base, SMM, Runtime)
CryptPkcs7VerifyBase.c (shared between Base, SMM)
CryptPkcs7VerifyRuntime.c (for Runtime only)
CryptPkcs7VerifyBase.c will have original implementation of
Pkcs7GetAttachedContent() as CryptPkcs7Verify.c. CryptPkcs7VerifyRuntime.c
provide a NULL version of Pkcs7GetAttachedContent().
No functionality and interface change is involved in this patch.
Cc: Ting Ye <ting.ye@intel.com>
Cc: Qin Long <qin.long@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ting Ye <ting.ye@intel.com>
Introduce two public functions CharToUpper and AsciiCharToUpper.
They have the same functions as InternalCharToUpper and
InternalBaseLibAsciiToUpper.Considering the internal functions will
be removed,so directly I change their function names to the public ones'.
https://bugzilla.tianocore.org/show_bug.cgi?id=1369
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1482
CapsuleApp is used for trigger capsule update.
Add -OD option in CapsuleApp to support doing capsule update via storage.
Add -F and -L options to support dumping information feature.
Finish unit test for -F and -L options.
Already verify this feature on Denlow platform, success to update capsule
via hard disk with -OD option.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
In some cases, such as MD RAID1 in Linux, the bootloader may be in a
nested EFI system partition partition. For example, sda1 and sdb1 are
combined as md0 and the first partition of md0, md0p1, is an EFI system
partition. Then, the bootloader can be located by the following device
paths:
PCI()/SATA(sda)/Partition(sda1)/Partition(md0p1)/File(bootloader.efi)
PCI()/SATA(sdb)/Partition(sdb1)/Partition(md0p1)/File(bootloader.efi)
To make the boot option more resilient, we may create a boot option with
the short-form device path like "Partition(md0p1)/File(bootloader.efi)".
However, BmMatchPartitionDevicePathNode() only matched the first
partition node and ignored the nested partitions, so the firmware would
refuse to load bootloader.efi since "Partition(md0p1)" doesn't match
either "Partition(sda1)" or "Partition(sda2)".
This commit modifies BmMatchPartitionDevicePathNode() to iterate all
nested partitions so that the above boot option could work.
v2 - Simplify the node matching logic
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Issue : SD read failure for high capacity cards e.g. 64 GB
Reason : Command argument value exceeds 32 bit for block number 0x3787FFF
and cant be fit into 32 bit wide SD host controller register.
Fix :
AccessMode bits [29:30] of OCR is a valid definition to calculate
data address for eMMC cards.
For SD cards, data address is calculated on the basis of
card capacity status bit[30] of OCR.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Currently, we always invalidate the TLBs entirely after making
any modification to the page tables. Now that we have introduced
strict memory permissions in quite a number of places, such
modifications occur much more often, and it is better for performance
to flush only those TLB entries that are actually affected by
the changes.
At the same time, relax some system wide data synchronization barriers
to non-shared. When running in UEFI, we don't share virtual address
translations with other masters, unless we are running under virt, but
in that case, the host will upgrade them as appropriate (by setting
an override at EL2)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1491
This patch is to update the data type of variable "Offset"
from UINT8 to UINT32 to fix following build issue.
...\Parsers\Pptt\PpttParser.c(193): error C2220:
warning treated as error - no 'object' file generated
...\Parsers\Pptt\PpttParser.c(193): warning C4244: '=':
conversion from 'UINT32' to 'UINT8', possible loss of data
Cc: Krzysztof Koch <krzysztof.koch@arm.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
ArmSetMemoryAttributes() still chokes in some cases, i.e., when the
length of the region exceeds 4 GB, the subtraction overflows, which
results in the region being misidentified as being 32-bit addressable.
Let's update the logic to trim the length to what we can address with
32 bits. This fixes the issue, and also deals with the issue where an
entire region is disregarded if part of it exceeds beyond what we can
map with 32 bits.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The newly added standalone MM versions of the FTW and variable runtime
drivers were included in MdeModulePkg.dsc to get test coverage when
building the package from its own .dsc, but the resulting modules are
non-functional since they incorporate some dummy libraries.
Dandan reports that these modules don't build cleanly when using the
EBC or XCODE5 compilers, so given the above, let's just ignore them
in this case.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bi Dandan <dandan.bi@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1485
Current FSP utilizes pre-allocated temporary memory from
boot loader for both heap and stack. To reduce overall
temporary memory usage FSP may share the same stack with
boot loader and only needs a smaller memory for heap,
no separate memory required for stack.
Setting PcdFspHeapSizePercentage to 0 to enable FSP sharing
stack with boot loader, in this case boot loader stack
has to be large enough for FSP to use. Default is 50
(half memory heap and half memory stack) for backward
compatible with original model.
Test: Verified on internal platform and booting successfully
with both modes.
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
delete the shared global variable from Common.Misc
delete the uncalled users of the variable from build.build
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Refactor to 'dict' from 'IterableUserDict' which was only required for old
python interpreter.
Sort imports according to PEP8
Remove those we dont need.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Added the acpiview parser for the PPTT table.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1323
Merge EmuVariable and Real variable driver.
CacheOffset could be removed in UpdateVariable() after
//
// update the memory copy of Flash region.
//
CopyMem (
(UINT8 *)mNvVariableCache + CacheOffset,
(UINT8 *)NextVariable, VarSize
);
is moved to be before mVariableModuleGlobal->NonVolatileLastVariableOffset
value is updated, like right before
mVariableModuleGlobal->NonVolatileLastVariableOffset +=
HEADER_ALIGN (VarSize);
Except for the movement above, the patch also capitalizes the first
character of "update the memory copy of Flash region".
This patch prepares for adding emulated variable NV mode
support in VariableRuntimeDxe.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Acked-by: Julien Grall <julien.grall@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1323
Merge EmuVariable and Real variable driver.
Add macro NV_STORAGE_VARIABLE_BASE.
Not get NV PCD in VariableWriteServiceInitialize, but in
FtwNotificationEvent/SmmFtwNotificationEvent, then
VariableWriteServiceInitialize could be not aware the NV
storage is real or emulated.
This patch prepares for adding emulated variable NV mode
support in VariableRuntimeDxe.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Acked-by: Julien Grall <julien.grall@arm.com>
ArmPkg/Include/IndustryStandard/ArmTrustZoneSmc.h contains definitions
contradicting the SMC Calling Convention (ARM DEN0028B).
It also has no users in public trees. So delete before it can cause
damage.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
TE images take up less space when using 4 KB section alignment, since
the FFS/FV generation code optimizes away the redundant, nested padding.
This saves 4 KB of space, which is a worthwhile improvement for code
that executes in place in secure context.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
The dispatcher uses the PE/COFF loader to load images into the heap,
but only does so after copying the entire image first, leading to
two copies being made for no good reason.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The special handling of the EFI_IMAGE_SUBSYSTEM_EFI_RUNTIME_DRIVER
attribute is only necessary for images that are relocated twice, i.e.,
in the context of SetVirtualAddressMap (). This does not apply to
standalone MM modules, so drop the check.
Drop some redundant DEBUG output while at it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
ASSERT_EFI_ERROR (x) is a shorthand for ASSERT(!EFI_ERROR(x)), and so
it should only be used with EFI_STATUS type expressions.
So drop two instances that operate on other types, since neither looks
particularly useful.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Remove MM_STANDALONE from the list of permitted modules for this library.
It should only be used by the standalone MM core.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jagadeesh Ujja <jagadeesh.ujja@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This MemoryAllocationLib code is based on the staging implementation of
StandaloneMmPkg, with the following changes:
- use correct MODULE_TYPE
- include MmServicesTableLib instead of declaring gMmst directly
- update code comments referring to the MM core
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jagadeesh Ujja <jagadeesh.ujja@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This HobLib code is based on the staging implementation of
StandaloneMmPkg, with the following changes:
- drop the unused AArch64/StandaloneMmCoreHobLibInternal.c source file
- remove hack from HobLibConstructor()
- update code comments referring the MM core
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jagadeesh Ujja <jagadeesh.ujja@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Add MM_STANDALONE to the list of module types that are permitted to
link to this library.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Permit CheckUefiLib to be used by MM_STANDALONE modules. Since this
library has a constructor, change the library's module type into
BASE so its constructor prototype is compatible with MM_STANDALONE
as well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Add MM_STANDALONE to the list of module types that are permitted to
link to this library. Also, since the constructor prototype is
different between MM_STANDALONE and DXE_DRIVER type libraries,
convert the library into BASE type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Permit SmmCryptLib to be used by MM_STANDALONE modules
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Move PackRegistryFormatGuid logic from Common.Misc to this file.
There were no other consumers of the function.
As it is one line, just replace the logic without the separate function.
v2 - change to fix the import statement
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Move SplitOption and ConvertStringToByteArray from
Common.Misc to this file.
There were no other consumers of the functions.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Move IsFieldValuieAnArray from Common.Misc to this file.
There were no other consumers of the function.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Move ProtocolValue and PpiValue from Common.Misc to this file.
There were no other consumers of these 2 functions.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
In GenFds.py, Due to the second assignment, the value is wrong
Its value should a list, not a string.and this line is not required
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Move DataDump and DataRestore from Common.Misc to this file.
There were no other consumers of these 2 functions.
Import threading since that module is used in build.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
GenFdsCommand returned dictionary with elements that
are not compatible with GenFdsApi.
As a result the following options were not processed by GenFdsApi:
-v, -q, -d, --genfds-multi-thread, --ignore-sources
The issue is introduced by commit b3497bad12.
V2: Remove EFI_SOURCE references
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Felix Polyudov <felixp@ami.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Update _FixedPcdVoidTypeDict to FixedVoidTypePcds
'_FixedPcdVoidTypeDict' no longer exists because edk2 version (b23414f6).
'ModuleAutoGen' object has no attribute '_FixedPcdVoidTypeDict'.
Build fail when PCD use in the [DEPEX] section of INF files
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1426
When calculating the address of RelocBaseEnd,
the RelocBase address is ImageBase + RelocDir->VirtualAddress,
the size of RelocDir is RelocDir->Size.
So the RelocBaseEnd address is:
ImageBase + RelocDir->VirtualAddress + RelocDir->Size - 1
not
ImageBase + RelocDir->VirtualAddress + RelocDir->Size
This patch is to fix this issue when call PeCoffLoaderImageAddress
function to calculate the address of RelocBaseEnd.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1466
DEC file defines PCD default value and PCD supported type.
DSC can configure PCD type and value.
If the value is same to default value in DEC file,
DSC can only configure PCD type and leave empty for value.
This usage supports all type PCD except for DynamicHii type.
So, DynamicHii PCD should support this usage. Below is one example in DSC.
for example,
[PcdsDynamicHii.common.DEFAULT]
PcdPkgTokenSpaceGuid.PcdCName|L"VarName"|gVarGuid|0x00||NV,BS
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Commit 31f5388006 ("ArmPkg/DefaultExceptionHandlerLib: use console
if available") added calls to AsciiPrint() to the default exception
handler code, but the ARM version did not include UefiLib.h yet
(even though the .INF declares it unconditionally), resulting in
build breakage. So add the missing include.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The library's MODULE_TYPE and the module type restrictions it
defines are needlessly strict. Just change the library to BASE
type and drop the restrictions entirely. Also, drop a bogus
library dependency on DxeServicesLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Print the minimal 'exception occurred' message to the console as well
as to the serial port if the console is available. This makes such
messages visible on systems where the console is graphical and the
serial is not connected.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Drop the redundant BASE variant, which is no longer used anywhere
now that DebugAgentSymbolsBaseLib no longer incorporates a vector
table and exception handling.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Drop the reference to ArmPkg/DefaultExceptionHandlerLibBase, which
is no longer used anywhere now that DebugAgentSymbolsBaseLib no
longer incorporates a vector table and exception handling.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Declare that this library is only usable in the context of DXE core
or a DXE driver. Set the MODULE_TYPE to BASE: this only affects the
prototype of the constructor (if present) but doesn't actually
restrict the usage context otherwise.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
DebugAgentSymbolsBaseLib is an optional library that is in charge
of extracting debug headers from SEC and PEI_CORE images in memory
so the filename and the offset in memory can be reported via the
UART, allowing a developer to load debugging symbols into his
debugger.
Interestingly enough, DebugAgentSymbolsBaseLib is also in charge of
exception handling before this duty is taken over by either the PEI
core, or the CPU DXE driver when running under PrePi.
Since exceptions are not actually handled at all on AArch64, and simply
routed to the DefaultExceptionHandlerLib (for which a special version
has been created to be usable this early), let's get rid of this
dubious functionality altogether.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
For build testing coverage, add the newly introduced MM_STANDALONE
versions of the fault tolerant write (FTW) and variable runtime
driver to MdeModulePkg.dsc. Note that the resulting binaries will
not be able to run, since they rely on dummy implementations of
MemoryAllocationLib and HobLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>.
Add MM_STANDALONE to the list of permitted module types of the
VarCheckLib library implementation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>.
Add MM_STANDALONE to the list of permitted module types of the
AuthVariableLibNull library implementation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>.
MdeModulePkg/Universal/DebugSupportDxe/DebugSupportDxe.inf does not
build for AARCH64 since it does not provide the needed PlDebugSupport.h
header. So move the module to a x86 only section.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>.
In order to permit MM_STANDALONE modules to be built without relying
on StandaloneMmPkg, provide a BASE type NULL implementation of
MemoryAllocationLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>.
In order to permit MM_STANDALONE modules to be built without relying
on StandaloneMmPkg, provide a BASE type NULL implementation of HobLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>.
The newly introduced generic MmServicesTableLib can be implemented
for traditional SMM (as we did already), but MM_STANDALONE drivers
require an implementation that is based on standalone MM.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reuse most of the existing code to implement a variable runtime
driver that will be able to execute in the context of standalone
MM.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In preparation of providing a standalone MM based variable runtime
driver, move the existing SMM driver to the new MM services table,
and factor out some pieces that are specific to the traditional
driver, mainly related to the use of UEFI boot services, which are
not accessible to standalone MM drivers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Implement a new version of the fault tolerant write driver that can
be used in the context of a standalone MM implementation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In preparation of providing a standalone MM based FTW driver, move
the existing SMM driver to the new MM services table, and factor out
some pieces that are specific to the traditional driver, mainly
related to the use of UEFI boot services, which are not accessible
to standalone MM drivers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The SMM based FTW and variable drivers are going to depend on
MmServicesTableLib after a subsequent patch, so add a resolution
for it to various Vlv2TbltDevicePkg .dsc files.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
The SMM based FTW and variable drivers are going to depend on
MmServicesTableLib after a subsequent patch, so add a resolution
for it to various QuarkPlatformPkg .dsc files.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The SMM based FTW and variable drivers are going to depend on
MmServicesTableLib after a subsequent patch, so add a resolution
for it to various OvmfPkg .dsc files.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
The SMM based FTW and variable drivers are going to depend on
MmServicesTableLib after a subsequent patch, so add a resolution
for it to MdeModulePkg.dsc.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1426
V2:
(1) Add NULL pointer check for the input parameters
(2) Add check for the "Adjust" value before applying fix ups.
In function PeCoffLoaderRelocateImageForRuntime, it doesn't
do much check when do relocation. For API level consideration,
it's not safe enough.
So this patch is to replace the same code logic with function
PeCoffLoaderImageAddress which will cover more validation.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
XCODE5 reports warning "equality comparison with extraneous parentheses".
Remove extraneous parentheses around the comparison to silence this warning.
This issue is caused by commit 8daa4278e8.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Feng Bob C <bob.c.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Warning message is that "equality comparison with extraneous parentheses"
Remove extraneous parentheses around the comparison to silence this warning.
This issue is caused by commit 8daa4278e8.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Feng Bob C <bob.c.feng@intel.com>
Reviewed-by: Feng Bob C <bob.c.feng@intel.com>
In AcquireSpinLock function, it may call GetPerformanceCounter which
final calls PeiService table. This code may also been used by AP but
AP should not calls PeiService. This patch update code to avoid use
AcquireSpinLock function.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1411
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
((Facs->Flags & EFI_ACPI_4_0_OSPM_64BIT_WAKE__F) != 0))
In above code, Facs->OspmFlags should be used instead.
EFI_ACPI_4_0_OSPM_64BIT_WAKE__F is a bit in OSPM Enabled Firmware
Control Structure Flags field, not in Firmware Control Structure
Feature Flags.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1430
Cc: Aleksiy <oleksiyy@ami.com>
Cc: Jian Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
((Facs->Flags & EFI_ACPI_4_0_OSPM_64BIT_WAKE__F) != 0))
In above code, Facs->OspmFlags should be used instead.
EFI_ACPI_4_0_OSPM_64BIT_WAKE__F is a bit in OSPM Enabled Firmware
Control Structure Flags field, not in Firmware Control Structure
Feature Flags.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1430
Cc: Aleksiy <oleksiyy@ami.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Take care not to dereference BlockEntry if it may be pointing past
the end of the page table we are manipulating. It is only a read,
and thus harmless, but HeapGuard triggers on it so let's fix it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Ignore calls to ArmSetMemoryAttributes () when the region described
is outside of the 32-bit addressable range. This memory is not
mapped in the first place, and the current code does not deal with
the high bits correctly, resulting in hangs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
GCC for 32-bit ARM chokes on .aslc files when running with LTO
enabled. Since LTO has no benefit whatsoever here, just disable
it globally for GCC5 and up when building .aslc files.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The definitions of the rebranded MM protocol stack were chosen such
that the existing SMM based core drivers can be reused. So let's
implement MmServicesTableLib based on gEfiMmBaseProtocolGuid, which
is simply gEfiSmmBase2ProtocolGuid under the hood.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
SMM has been rebranded as MM, and can be implemented in traditional
mode or standalone mode, using the same prototype for the services
table. Expose this table via MmServicesTableLib, permitting the
respective implementations to expose a traditional or standalone
version.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jagadeesh Ujja <jagadeesh.ujja@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V3:
Define union to specify the ppi or protocol.
V2:
1. Initialize CpuFeaturesData->MpService in CpuInitDataInitialize
and make this function been called at the begin of the
initialization.
2. let all other functions use CpuFeaturesData->MpService install
of locate the protocol itself.
V1:
GetProcessorIndex function calls GetMpPpi to get the MP Ppi.
Ap will calls GetProcessorIndex function which final let AP calls
PeiService.
This patch avoid GetProcessorIndex call PeiService.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1411
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1427
1. UserIdentifyManagerDxe is used to provide UserManagerProtocol.
2. UserProfileManagerDxe provides UI setting
3. PwdCredentialProviderDxe & UsbCredentialProviderDxe are implementation
examples.
Remove above features because of no platform use it.
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Zhang Chao B <chao.b.zhang@intel.com>
PopulateLevel2PageTable () is invoked for [parts of] mappings that
start or end on a non-1 MB aligned address (or both). The size of
the mapping depends on both the start address modulo 1 MB and the
length of the mapping, but the logic that calculates this size is
flawed: subtracting 'start address modulo 1 MB' could result in a
negative value for the remaining length, which is obviously wrong.
So instead, take either RemainLength, or the rest of the 1 MB
block, whichever is smaller.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Eugene Cohen <eugene@hp.com>
Commit 829633e3a8 ("ArmPkg/ArmMmuLib: Add new attribute
WRITE_BACK_NONSHAREABLE") introduced support for non-shareable
cached mappings to the AArch64 version of ArmMmuLib, but the ARM
version was left behind, so fix that.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Build tool do not support SET syntax in DSC.
If the SET statement is used in DSC, build tool just ignore it.
That behavior confused some users that
they think SET statement works in DSC like in FDF.
To avoid such confusion, build tool report ERROR
if there is "SET" statement in Dsc file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Cc: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1433
v2: Remove an unused variable.
Current logic of shell tftp download was writing file after tftp
download finished, when the file is large, it looks like the shell
tftp command hanged after download was finished. To improve
end-user experience, the solution is using split file writing
instead.
This patch update the code to open and close file inside
DownloadFile(), and save each packet to file within callback
function CheckPacket().
Since AllocatePage() is no-longer needed, This patch can also
remove the memory limitation. The download file can be larger
than system free memory now.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Songpeng Li <songpeng.li@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Provided functions in UEFILib that abstract driver model protocol
uninstallation. This helps drivers to install and uninstall protocols
using a library to keep things seemless.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1429
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1 - Some of these imports are cascaded from another file. Import them locally.
2 - Some of these imports are not used. Remove them.
3 - Some of these were missing the namespace used to import them.
These changes facilitate optimization of BaseTools:
https://bugzilla.tianocore.org/show_bug.cgi?id=42
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1415
When an integer constant specified in the .vfr file is
too large for the varstore field it is being used with,
the VFR compiler reports an overflow warning like this:
Test.vfr(693): WARNING: Overflow: Value 1024 is too large to
store in a UINT8
: String to UINT* Overflow
Since Warning does not break the build process,
and it is easy to miss it.
This patch is to update the code to report error and break
the build if meet this kind of issue.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
"tools_def.template" currently suggests, in the documentation of the
LzmaF86Compress utility, that said tool is generally unhelpful on binaries
built with the GCC44 toolchain, relative to LzmaCompress.
This statement doesn't apply to the GCC48 toolchain. I compressed 126
NOOPT_GCC48/IA32 unique EFI modules (built with gcc-4.8.5, as part of
OVMF) with both LzmaCompress and LzmaF86Compress. I repeated the same for
117 NOOPT_GCC48/X64 unique EFI modules. On average, the LzmaF86Compress
output size was 92.4% of the LzmaCompress output size in the IA32 case
(best relative compression: 86.01%, poorest relative compression: 97.47%
-- still a win). In the X64 case, the LzmaF86Compress output size was
92.95% of the LzmaCompress output size, on avarege (best relative
compression: 87.69%, poorest relative compression: 97.65% -- again, still
a win).
Given the consistent improvement from LzmaCompress to LzmaF86Compress,
remove the statement (rather than updating it to GCC48).
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The last patch decremented references on a number of DEFs. They can be
classified into three groups:
(a) those that remain used by multiple toolchains, or by multiple
definitions of a given toolchain (refcount >= 2):
- GCC_ASLCC_FLAGS
- GCC_ASLPP_FLAGS
- GCC_HOST_PREFIX
- GCC_IA32_RC_FLAGS
- GCC_PP_FLAGS
- GCC_VFRPP_FLAGS
- GCC_X64_RC_FLAGS
- IASL_FLAGS
- IASL_OUTFLAGS
- UNIX_IASL_BIN
- GCC44_IA32_X64_DLINK_FLAGS (!)
(b) those that are only used by GCC48 (refcount == 1):
- GCC44_ASM_FLAGS
- GCC44_IA32_CC_FLAGS
- GCC44_IA32_DLINK2_FLAGS
- GCC44_IA32_X64_ASLDLINK_FLAGS
- GCC44_X64_CC_FLAGS
- GCC44_X64_DLINK2_FLAGS
- GCC44_X64_DLINK_FLAGS
(c) those that are no longer used (refcount == 0):
- GCC44_IA32_PREFIX
- GCC44_X64_PREFIX
For the members of class (b), expand their definitions at the referring
sites, and remove their definitions.
For the members of class (c), remove their definitions.
(It's easier to review this patch with "git show --word-diff".)
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The last patch decremented references on a number of DEFs. They can be
classified into three groups:
(a) those that remain used by multiple toolchains (refcount >= 2):
- GCC_ASLCC_FLAGS
- GCC_ASLPP_FLAGS
- GCC_HOST_PREFIX
- GCC_IA32_RC_FLAGS
- GCC_PP_FLAGS
- GCC_VFRPP_FLAGS
- GCC_X64_RC_FLAGS
- IASL_FLAGS
- IASL_OUTFLAGS
- UNIX_IASL_BIN
(b) those that are only used by GCC48 (refcount == 1):
- GCC45_ASM_FLAGS
- GCC45_IA32_CC_FLAGS
- GCC45_IA32_DLINK2_FLAGS
- GCC45_IA32_X64_ASLDLINK_FLAGS
- GCC45_IA32_X64_DLINK_FLAGS
- GCC45_X64_CC_FLAGS
- GCC45_X64_DLINK2_FLAGS
- GCC45_X64_DLINK_FLAGS
(c) those that are no longer used (refcount == 0):
- GCC45_IA32_PREFIX
- GCC45_X64_PREFIX
For the members of class (b), expand their definitions at the referring
sites, and remove their definitions.
For the members of class (c), remove their definitions.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The last patch decremented references on a number of DEFs. They can be
classified into three groups:
(a) those that remain used by multiple toolchains (refcount >= 2):
- GCC_ASLCC_FLAGS
- GCC_ASLPP_FLAGS
- GCC_HOST_PREFIX
- GCC_IA32_RC_FLAGS
- GCC_PP_FLAGS
- GCC_VFRPP_FLAGS
- GCC_X64_RC_FLAGS
- IASL_FLAGS
- IASL_OUTFLAGS
- UNIX_IASL_BIN
(b) those that are only used by GCC48 (refcount == 1):
- GCC46_ASM_FLAGS
- GCC46_IA32_CC_FLAGS
- GCC46_IA32_DLINK2_FLAGS
- GCC46_IA32_X64_ASLDLINK_FLAGS
- GCC46_IA32_X64_DLINK_FLAGS
- GCC46_X64_CC_FLAGS
- GCC46_X64_DLINK2_FLAGS
- GCC46_X64_DLINK_FLAGS
(c) those that are no longer used (refcount == 0):
- GCC46_IA32_PREFIX
- GCC46_X64_PREFIX
For the members of class (b), expand their definitions at the referring
sites, and remove their definitions.
For the members of class (c), remove their definitions.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The last patch decremented references on a number of DEFs. They can be
classified into three groups:
(a) those that remain used by multiple toolchains (refcount >= 2):
- GCC_ASLCC_FLAGS
- GCC_ASLPP_FLAGS
- GCC_HOST_PREFIX
- GCC_IA32_RC_FLAGS
- GCC_PP_FLAGS
- GCC_VFRPP_FLAGS
- GCC_X64_RC_FLAGS
- IASL_FLAGS
- IASL_OUTFLAGS
- UNIX_IASL_BIN
(b) those that are only used by GCC48 (refcount == 1):
- GCC47_ASM_FLAGS
- GCC47_IA32_CC_FLAGS
- GCC47_IA32_DLINK2_FLAGS
- GCC47_IA32_X64_ASLDLINK_FLAGS
- GCC47_IA32_X64_DLINK_FLAGS
- GCC47_X64_CC_FLAGS
- GCC47_X64_DLINK2_FLAGS
- GCC47_X64_DLINK_FLAGS
(c) those that are no longer used (refcount == 0):
- GCC47_IA32_PREFIX
- GCC47_X64_PREFIX
For the members of class (b), expand their definitions at the referring
sites, and remove their definitions.
For the members of class (c), remove their definitions.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
DLINK_COMMON definitions are not consumed by "build_rule.template";
instead, DLINK_COMMON definitions (internal to "tools_def.template") were
invented for sharing options between ASLDLINK_FLAGS and DLINK_FLAGS.
However, this intent doesn't actually apply to
GCC48_IA32_X64_DLINK_COMMON: it is never consumed. Furthermore, the
GCC45..GCC47 instances of IA32_X64_DLINK_COMMON too lead up to
GCC48_IA32_X64_DLINK_COMMON only -- they form a dead-end. Remove them
altogether, in order to simplify the subsequent patches.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This drops ARM and AARCH64 support from the GCC46 and GCC47 toolchain
definitions, which are on the list to be removed, along with VS2003,
VS2005, VS2008, VS2010, DDK3790, UNIXGCC, GCC44, GCC45, ELFGCC, CYGGCC,
ICC, ICC11 and MYTOOLS.
Since GCC46 and GCC47 are the only ones on that list that support ARM
and/or AARCH64, let's give Liming a hand and cover the ARM side of
things first, so that everything that remains to be removed is x86
only.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
[lersek@redhat.com: add bugzilla reference and CCs]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
AuthVariableLib library can be used by MM_STANDALONE drivers as well.
So add MM_STANDALONE to the list of module types this library supports.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jagadeesh Ujja <jagadeesh.ujja@arm.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The standalone MM core is executed in place, and resides in a
separate execution context which may be space constrained.
Since code and data may be mapped with different attributes for
security reasons, the PE/COFF binary could have a section
alignment of 4 KB.
This means that any relocation data is not only useless, but it
will also take up 4 KB of valuable space.
So add support for the RELOCS_STRIPPED attribute on FFS files of
this type, so that we can get rid of the .reloc section altogether.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1410
BaseTools should not generate C structure array initial value
if the value is not specified with CODE style.
This patch is going to remove the incorrect initial value statement
and correct the Pcd Array value assignment statement.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch is going to fix the regression issue
by 72a1d77694
After enable PCD array, the Pcd.OverrideStruct has a new
key, array index, but the build report is not changed correspondingly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Addressed warnings and remarks reported by IASL.EXE. Some methods had
unused arguments. A method was returning a value when it should not.
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Rydman <thomas.j.rydman@intel.com>
Reviewed-by: Zhang Chao B <chao.b.zhang@intel.com>
Add SDMA, ADMA2 and 26b data length support.
If V4 64 bit address mode is supported in capabilities register,
program controller to enable V4 host mode and use appropriate
SDMA registers supporting 64 bit addresses.
If V4 64 bit address mode is supported in capabilities register,
program controller to enable V4 host mode and use appropriate
ADMA descriptors supporting 64 bit addresses.
If host controller version is above V4.0, enable ADMA2 with 26b data
length support for better performance. HC 2 register is configured to
use 26 bit data lengths and ADMA2 descriptors are configured appropriately.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1359
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Use __builtin_unreachable instead of infinite recursion to fix an
infinite recursion error when building StdLib with XCODE5/CLANG38.
Cc: Daryl McDaniel <edk2-lists@mc2research.org>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Alex James <theracermaster@gmail.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
According to the POSIX standard, cc_t, speed_t, and tcflag_t should be
unsigned integer types. Define cc_t as unsigned to match POSIX and fix
an implicit conversion error when building StdLib with XCODE5/CLANG38.
Cc: Daryl McDaniel <edk2-lists@mc2research.org>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Alex James <theracermaster@gmail.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1091
Previously, when compiling NASM source files, BaseTools did not support
including files outside of the NASM source file directory. As a result, we
duplicated multiple copies of "StuffRsb.inc" files in UefiCpuPkg. Those
INC files contain the common logic to stuff the Return Stack Buffer and
are identical.
After the fix of BZ 1085:
https://bugzilla.tianocore.org/show_bug.cgi?id=1085
The above support was introduced.
Thus, this commit will merge all the StuffRsb.inc files in UefiCpuPkg into
one file. The merged file will be named 'StuffRsbNasm.inc' and be placed
under folder UefiCpuPkg/Include/.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1418
This patch is going to fix a regression issue that is introduced
by commit b3497bad12.
Before commit b3497b, build launched a external GenFds.py to generate
Fd, so the global variable in GenFds.py was reset in each execution.
After commit b3497b, each GenFds run in the same python interpeter, so
we need to explicitly reset global variable in each GenFdsApi call.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1417
Since BaseLib API AsmLfence() is a x86 arch specific API and should be
avoided using in generic codes, this commit replaces the usage of
AsmLfence() with arch-generic API SpeculationBarrier().
Please note that speculation execution barriers are intended to be
asserted for SMM codes, hence, this commit still preserve an empty
implementation of the speculation execution barrier for the DXE codes.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1417
X86 specific BaseLib API AsmLfence() was introduced to address the Spectre
Variant 1 (CVE-2017-5753) issue. The purpose of this API is to insert
barriers to stop speculative execution. However, the API is highly
architecture (X86) specific, and thus should be avoided using across
generic code.
To address this issue, this patch will add a new BaseLib API called
SpeculationBarrier(). Different architectures will have different
implementations for this API.
For IA32 and x64, the implementation of SpeculationBarrier() will
directly call AsmLfence().
For ARM and AARCH64, this patch will add a temporary empty implementation
as a placeholder. We hope experts in ARM can help to contribute the actual
implementation.
For EBC, similar to the ARM and AARCH64 cases, a temporary empty
implementation is added.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The 'arm-linux-gnueabihf' target triplet we use for CLANG35 and
CLANG38 specifies a hardfloat target, and so the binaries that are
emitted are annotated as using VFP registers for passing floating
point arguments, even though no VFP is used anywhere in the code.
This works fine as long as we don't try to link against code
that uses software floating point, but combining object files
with different floating point calling conventions is not permitted.
So switch to the softfloat arm-linux-gnueabi triplet instead.
This affects both the name Clang uses when invoking the linker,
and the arguments it passes to it, and we are mostly interested
in the latter (since any version of GNU ld.bfd will do the right
thing as long as it targets EABI ARM)
For native builds, this change has no effect, since the unprefixed
system linker will take priority, and so Clang will pass the right
arguments to whichever linker happens to be the system linker.
For cross builds, the fact that Clang composes the name of the
linker by prefixing '-ld' with the target triplet implies that
users will have to switch to a version of binutils that targets
arm-linux-gnueabi rather than arm-linux-gnueabihf. Note that the
GCCx toolchain targets can use either when building for ARM so this
does not create a need to install two versions of the ARM cross
toolchain. Also, note that all ARM toolchains in the GCC family
are already documented as requiring a toolchain that targets
arm-linux-gnueabi and not arm-linux-gnueabihf.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Add function to allow enabling and disabling of the clock using the SCMI
interface. Add gArmScmiClock2ProtocolGuid to distinguish platforms that
support new API from those that just have the older protocol.
SCMI_CLOCK2_PROTOCOL also adds a version parameter to allow for future
changes. It is placed after the functions that are present in the
existing protocol to allow SCMI_CLOCK2_PROTOCOL to be cast to
SCMI_CLOCK_PROTOCOL so that only a single implementation of those
function are needed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Use an untyped PCD reference for PcdSerialRegisterBase, so that the
library gets built without hardcoded values, permitting modules to
override the default serial port. This allows SerialDxe to use a
different serial port from the one used for DEBUG output (which
often gets occluded due to the console driver clearing the screen).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Even though UEFI does not appear to use it, let's implement the
complete PI watchdog protocol, including handler registration,
which will be invoked before the ResetSystem() runtime service
when the watchdog timer expires.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Clean up the code, by adding missing STATIC modifiers, drop
redundant casts, and get rid of the 'success handling' anti
pattern in the entry point code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The SP805 watchdog driver doesn't implement the PI watchdog protocol
fully, but always simply resets the system if the watchdog time runs
out.
However, the hardware does support the intended usage model, as long
as the SP805 is wired up correctly. So let's implement interrupt based
mode involving a handler that is registered by the DXE core and invoked
when the watchdog runs out. In the interrupt handler, we invoke the
notify function if one was registered, before calling the ResetSystem()
runtime service (as per the UEFI spec)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Before fixing the SP805 driver, let's clean it up a bit. No
functional changes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Instead of #defining MAX_ALLOC_ADDRESS to MAX_ADDRESS as intended,
it is #defined to itself, causing all ARM builds to break.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The current ArmVirtMemoryInitPeiLib code splits the memory region passed
via PcdSystemMemoryBase/PcdSystemMemorySize in two if the region extends
beyond the MAX_ADDRESS limit. This was introduced for 32-bit ARM, which
may support more than 4 GB of physical address space, but cannot address
all of it via a 1:1 mapping, and a single region that is not mappable
in its entirety is unusable by the PEI core.
AArch64 is in a similar situation now: platforms may support more than
256 TB of physical address space, but only 256 TB is addressable by the
CPU, and so a memory region that extends from below this limit to above
it should be split.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Limit the PEI memory region so it will not extend beyond what we can
address architecturally when running with 4 KB pages.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
When creating the page tables for the 1:1 mapping, ensure that we don't
attempt to map more than what is architecturally permitted when running
with 4 KB pages, which is 48 bits of VA. This will be reflected in the
value of MAX_ALLOC_ADDRESS once we override it for AArch64, so use that
macro instead of MAX_ADDRESS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Take MAX_ALLOC_ADDRESS into account in the implementation of the
page allocation routines, so that they will only return memory
that is addressable by the CPU at boot time, even if more memory
is available in the GCD memory map.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Update the GCD memory map initialization code so it disregards
memory that is not addressable by the CPU at boot time. This
only affects the first memory descriptor that is added, other
memory descriptors are permitted that describe memory ranges
that may be accessible to the CPU itself only when executing
under the OS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
On some architectures, the maximum representable address deviates from
the virtual address range that is accessible by the firmware at boot
time. For instance, on AArch64, UEFI mandates a 4 KB page size, which
limits the address space to 48 bits, while more than that may be
populated on a particular platform, for use by the OS.
So introduce a new macro MAX_ALLOC_ADDRESS, which represent the maximum
address the firmware should take into account when allocating memory
ranges that need to be accessible by the CPU at boot time.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Ensure that we prevent the CPU from proceeding after having taken an
unhandled exception on a RELEASE build, which does not contain the
ASSERT() which ensures this on DEBUG and NOOPT builds.
Retain the code following the deadloop so that we can keep going when
running in a debugger.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The ARM linker may emit veneers, i.e., trampolines, when ordinary
direct relative branches cannot be used, e.g., for Thumb interworking
or branch targets that are out of range.
Usually, such veneers carry an absolute reference to the branch
target, which is problematic for us, since these absolute references
are not covered by annotations that are visible to GenFw in the
PE/COFF conversion, and so these absolute references are not fixed
up by the PE/COFF loader at runtime.
So switch to all ARM GNU ld toolchains to position independent veneers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The GdbDebugAgent library is unused and unmaintained, and now it
turns out it doesn't build with Clang, so let's just get rid of it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The following Pcds
- gArmTokenSpaceGuid.PcdArmLinuxSpinTable
- gArmTokenSpaceGuid.PcdArmLinuxAtagMaxOffset
- gArmTokenSpaceGuid.PcdArmLinuxFdtMaxOffset
- gArmTokenSpaceGuid.PcdArmLinuxFdtAlignment
remained defined, without actual users.
So get rid of them.
One reference to be deleted separately from edk2-platforms.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fix a bug because of b3497bad12.
Before the patch, when GenFds fail, the build continue and return success.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1405
Background as below.
Problem:
As static configuration from the PCDs, the binary PeiCore (for example
in FSP binary with dispatch mode) could not predict how many FVs,
Files or PPIs for different platforms.
Burden:
Platform developers need configure the PCDs accordingly for different
platforms.
To solve the problem and remove the burden, we can update code to
remove the using of PcdPeiCoreMaxFvSupported, PcdPeiCoreMaxPeimPerFv
and PcdPeiCoreMaxPpiSupported by extending buffer dynamically for FV,
File and PPI management.
This patch removes the using of PcdPeiCoreMaxPpiSupported in PeiCore.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1405
Background as below.
Problem:
As static configuration from the PCDs, the binary PeiCore (for example
in FSP binary with dispatch mode) could not predict how many FVs,
Files or PPIs for different platforms.
Burden:
Platform developers need configure the PCDs accordingly for different
platforms.
To solve the problem and remove the burden, we can update PeiCore to
remove the using of PcdPeiCoreMaxFvSupported, PcdPeiCoreMaxPeimPerFv
and PcdPeiCoreMaxPpiSupported by extending buffer dynamically for FV,
File and PPI management.
This patch removes the using of PcdPeiCoreMaxFvSupported in PeiCore.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1405
Background as below.
Problem:
As static configuration from the PCDs, the binary PeiCore (for example
in FSP binary with dispatch mode) could not predict how many FVs,
Files or PPIs for different platforms.
Burden:
Platform developers need configure the PCDs accordingly for different
platforms.
To solve the problem and remove the burden, we can update PeiCore to
remove the using of PcdPeiCoreMaxFvSupported, PcdPeiCoreMaxPeimPerFv
and PcdPeiCoreMaxPpiSupported by extending buffer dynamically for FV,
File and PPI management.
This patch removes the using of PcdPeiCoreMaxFvSupported in Tcg(2)Pei.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1405
Background as below.
Problem:
As static configuration from the PCDs, the binary PeiCore (for example
in FSP binary with dispatch mode) could not predict how many FVs,
Files or PPIs for different platforms.
Burden:
Platform developers need configure the PCDs accordingly for different
platforms.
To solve the problem and remove the burden, we can update code to
remove the using of PcdPeiCoreMaxFvSupported, PcdPeiCoreMaxPeimPerFv
and PcdPeiCoreMaxPpiSupported by extending buffer dynamically for FV,
File and PPI management.
This patch removes the using of PcdPeiCoreMaxPeimPerFv in PeiCore.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
current edk2\BaseTools\Conf\build_rule.template, the compile of nasm
source files does not have the $(INC) support.
The '-I' option only includes the directory of the nasm source file
(${s_path}(+)). Hence, it will be impossible for nasm files to include
files outside of the nasm source file directory.
As a comparison, the compile of both .s and .asm have $(INC) support
in their compile commands.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=1085
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1390
1. support hex number for array index
2. support Non-Dynamic Pcd for array data type
3. support {} and {CODE()} for array data type
4. Change GetStructurePcdMaxSize to be a static function since it need to
be called in another static function. And this function does not depend on
it's class instance.
5. Add unittest for RemoveCComments function and
ArrayIndex regular expression.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Philippe Mathieu-Daud? <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Commit 9a67ba261f ("ArmVirtPkg: Replace obsoleted network drivers
from platform DSC/FDF") incorrectly added the BaseCryptLib, OpensslLib
and IntrinsicLib to "ArmVirtPkg/ArmVirtQemuKernel.dsc", it's redundant
and the library instances from "ArmVirt.dsc.inc" is already sufficient.
This patch also adjust the order of network drivers in "ArmVirtPkg/
ArmVirtQemuFvMain.fdf.inc" to make it same as the DSC file.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
UEFI SCT crashed and failed in NonDiscoverablePciDeviceDxe becase
required checks were not performed. Perform parameters validation in
NonDiscoverablePciDeviceDxe.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
Our default is already armv7-a, so no need to rewrite the PLATFORM_FLAGS
for that. Also, setting -mfpu=neon is not entirely inappropriate, since
NEON is not mandatory under v7.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Commit 9a67ba261f ("ArmVirtPkg: Replace obsoleted network drivers
from platform DSC/FDF") failed to take into account that the now
unconditionally included IScsiDxe.inf from NetworkPkg requires a
resolution for TcpIoLib. Since specifying such a resolution is harmless
for platforms that have no networking enabled, let's just fix things
by dropping the conditionals around it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This patch replaces the MdeModulePkg TCP, PXE and iSCSI driver with those
ones in NetworkPkg. These 3 drivers in MdeModulePkg are not being actively
maintained and will be removed from edk2 master soon.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Drop the -mno-movt command line option override, which is no longer
needed, and actually incompatible with versions of Clang before 3.6.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PE/COFF only has a very limited id space for runtime relocations, and
so it defines only a single relocation for movw/movt instruction pairs,
which can be combined to load a 32-bit symbol reference into a register.
For this to work as expected, these instructions must always appear in
the same order and adjacently, and this is something few compilers take
into account, unless they target PE/COFF explicitly (and this is not the
case for our ELF based toolchains)
For Clang 3.6 and later, we can pass the -mno-movt option to suppress
movw/movt pairs entirely, which works around the issue. Unfortunately,
for Clang 3.5, the option is called differently (-mllvm -arm-use-movt=0)
and mutually incompatible between 3.5 and 3.6.
Since it is desirable for the CLANG35 toolchain to be usable on newer
versions of Clang as well (given that it is the only non-LTO alternative
to CLANG38), let's work around this issue in a way that permits versions
3.5 and newer of Clang to be used with the CLANG35 profile.
So pass the -mkernel flag instead (and add -Qunused-argument so Clang
does not complain about the -mno-unaligned-access in ARM_CC_XIPFLAGS).
This also inhibits movw/movt generation, along with some other changes
(e.g., long calls) which do affect code generation but not in an
undesirable manner.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
ARM uses the low order bit of a branch target address to decide in
which execution mode (ARM or Thumb) a function needs to be called.
In order for this to work across object files, ELF function symbols
will have the low bit set if they were emitted in Thumb mode and
cleared otherwise. This annotation is only emitted if the ELF symbols
are annotated as function, since taking the address of some data
symbol (e.g., a literal) should not produce a value with the low bit
set, even if it appears in an object file containing Thumb code.
This means that all functions coded in assembler must have this
function annotation, or they may end up getting called in the
wrong mode, crashing the program.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
We currently permit R_ARM_GOT_PREL relocations in the ELF32 conversion
routines, under the assumption that relative relocations are fine as
long as the section layout is the same between ELF and PE/COFF.
However, as is the case with any proxy generating relocation, it is
up to the linker to emit an entry in the GOT table and populate it
with the correct absolute address, which should also be fixed up at
PE/COFF load time. Unfortunately, the relocations covering the GOT
section are not emitted into the static relocation sections processed
by GenFw, but only in the dynamic relocation section as a R_ARM_RELATIVE
relocation, and so GenFw fails to emit the correct PE/COFF relocation
data for GOT entries.
Since GOT indirection is pointless anyway for PE/COFF modules running
in UEFI context, let's just drop the references to R_ARM_GOT_PREL from
GenFw, resulting in a build time failure rather than a runtime failure
if such relocations do occur.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The self-relocating PrePi module that is used by the ArmVirtQemuKernel
and ArmVirtXen targets runs the linker in PIE mode so that it emits
dynamic relocations into the final image in a way that permits the
module to relocate itself into place before calling into the C code.
When building these targets using the CLANG38 toolchain, we switch
from the BFD to the GOLD linker, which behaves a bit differently when
building PIE executables, and insists on emitting GOT indirected symbol
references throughout, which means a) that we end up with absolute
addresses (which need to be fixed up at load time) for no good reason,
and b) we have to add support for handling GOT entries to GenFw if we
want to convert them into PE/COFF.
So instead, let's emit a shared library. Since the ELF image only serves
as the input to GenFw, this does not lead to any loss of functionality,
although it does require the -Bsymbolic linker option to be added to
ensure that no symbol based dynamic relocations are emitted (which
would, e.g., permit lazy binding for shared libraries). So for all
other toolchains, the linker option changes are a no-op.
Then, we have to convince CLANG38/GOLD that there is no need to refer
to symbols via a GOT entry. This is done by forcing hidden visibility
for all symbols in all components that make up the PrePi SEC module:
this informs the linker that a symbol is never exported or preempted,
making it safe to refer to it directly from anywhere in the code,
rather than indirectly via a GOT entry.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Move some PCD settings outs of the [PcdsFixedAtBuild.AARCH64] block,
so that they apply to 32-bit ARM as well. Without this change, the
ARM build doesn't work.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Since 4 KB section alignment is required when mapping PE/COFF images
with strict permissions, update the default section alignment when
using GCC49 and GCC5 in RELEASE mode. Note that XIP modules such as
SEC, PEIMs or PEI core are not affected by this change, since the
override to 32 byte aligment remains in effect.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Struct packing is only necessary for data structures whose in-memory
representation is covered by the PI or UEFI specs, and may deviate
from the ordinary C rules for alignment.
So in case of FileExplorerLib, this applies to the device path struct
only, and other structures used to carry program data should not be
packed, or we may end up with alignment faults on architectures such
as ARM, which don't permit load/store double or multiple instructions
to access memory locations that are not 32-bit aligned.
E.g., the following call in FileExplorerLibConstructor()
InitializeListHead (&gFileExplorerPrivate.FsOptionMenu->Head);
which is emitted as follows for 32-bit ARM/Thumb2 by Clang-5.0
3de0: b510 push {r4, lr}
3de2: 4604 mov r4, r0
...
3de8: e9c4 4400 strd r4, r4, [r4]
3dec: bd10 pop {r4, pc}
will perform a double-word store on the first argument, passed in
register r0, assuming that the pointer type of the argument is
enough to guarantee that the value is suitably aligned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1376
Today's implementation reuses the 32bit MMIO resource requested by
all PCI devices MMIO BARs when shadowing the option ROM.
Take a simple example, a system has only one PCI device. It requires
8MB 32bit MMIO and contains a 4MB option ROM. Today's implementation
only requests 8MB (max of 4M and 8M) 32bit MMIO from
PciHostBridgeResourceAllocation protocol. Let's assume the MMIO range
[3GB, 3GB+8MB) is allocated. The 3GB base address is firstly
programmed to the option ROM BAR for option ROM shadow. Then the
option ROM decoding is turned off and 3GB base address is programmed
to the 32bit MMIO BAR.
It doesn't cause issues when the device doesn't request too much
MMIO.
But when the device contains a 64bit MMIO BAR which requests 4GB MMIO
and a 4MB option ROM. Let's assume [3GB, 3GB+8MB) 32bit MMIO range is
allocated for the option ROM. When the option ROM is being shadowed,
64bit MMIO BAR is programmed to value 0, which means [0, 4GB) MMIO is
given to the 64bit BAR.
The range overlaps with the option ROM range which may cause the
device malfunction (e.g.: option ROM cannot be read out) when the
device has two separate decoders: one for MMIO BAR, the other for
option ROM.
The patch requests dedicated MEM32 resource for Option ROMs and
moves the Option ROM shadow logic after all MMIO BARs are programmed.
The MMIO BAR setting to 0 when shadowing Option ROM is also skipped
because the MMIO BAR already contains the correct value.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
The StandaloneMM image executes in S-EL0 on reference Arm platforms
and is deployed by the trusted firmware as BL32 image. Memory for the
Standalone MM drivers is marked as RW+XN initially, allowing the
drivers to be loaded into the memory. Once loaded, the memory
attributes need to be changed to RO+XN for rodata sections and RO+X
for code sections.
Achieve this through the extra action 'UpdatePeCoffPermissions' to
request the privileged firmware in EL3 to update the permissions.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
The MMU functions needed for StandaloneMM image are now exported
through a separate library class. Make the corresponding change in the
core's entry point inf file so that it references the correct library
class for modifying the MMU attributes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Introduction of the -mstrict-align flag results in GCC attempting
to use memset to zero out the InitMmFoundationSvcArgs structure.
In the absence of this C library function, this patch explicitly
zeroes this data structure prior to use.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
On AArch64, Standalone MM during the SEC phase runs in S-EL0 with
SCTLR_EL1.A=1. This patch adds the -mstrict-align compiler flag to
ensure that the generated code is compliant with the runtime
alignment checks.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
This patch fixes the dependency PL011UartLib has on PL011UartClockLib by
including its implementation path in the StandaloneMm DSC file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
This reverts commit 82379bf660.
On AArch64, we can only use 48 address bits while running in UEFI,
while the GCD and UEFI memory maps may describe up to 52 bits of
physical address space. For this reason, MAX_ADDRESS was reduced
to 48 bits, to ensure that the firmware does not inadvertently
attempt to allocate memory that we cannot access.
However, MAX_ADDRESS is used in runtime drivers as well, and
runtime drivers may deal with kernel virtual addresses, which have
bits [63:48] set. In fact, the OS may be running with 64 KB pages
and pass addresses into the runtime services that use up to 52
bits of address space, either with the top bits set or cleared,
even if the physical address space does not extend beyond 48 bits.
In summary, changing MAX_ADDRESS is a mistake, and needs to be
reverted.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1288
This patch is one of build tool performance improvement
series patches.
This patch is going to customize the deepcopy function for
SkuClass, PcdClassObject and python dictionary.
python deepcopy copy everything of a object, but for our current
usage we just need to copy the data we care about recursively.
By implementing __deepcopy__ for SkuClass, PcdClassObject, we can customize
deepcopy function for them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: BobCF <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1288
This patch is one of build tool performance improvement
series patches.
This patch is going to use join function instead of
string += string2 statement.
Current code use string += string2 in a loop to combine
a string. while creating a string list in a loop and using
"".join(stringlist) after the loop will be much faster.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: BobCF <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1288
[V2]
Optimize this patch so that it can be easy to review.
This patch is just apply the change to original files while
not create new similar files.
[V1]
This patch is one of build tool performance improvement
series patches.
This patch is going to use python list to store the parser data
instead of using sqlite database.
The replacement solution is as below:
SQL insert: list.append()
SQL select: list comprehension. for example:
Select * from table where field = “something”
->
[ item for item in table if item[3] == “something”]
SQL update: python map function. for example:
Update table set field1=newvalue where filed2 = “something”.
-> map(lambda x: x[1] = newvalue,
[item for item in table if item[2] == “something”])
SQL delete: list comprehension.
With this change, We can save the time of interpreting SQL statement
and the time of write database to file system
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: BobCF <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
V2:
Extract the common part of new API and the original main() function
into one function.
V1:
https://bugzilla.tianocore.org/show_bug.cgi?id=1288
Currently, AutoGen and GenFds run in different python interpreters. The
parser are duplicated. This patch is going to create new API for GenFds
and have the build to call that API instead of executing GenFds.py. As
such, the GenFds and build can share the parser data.
This patch is expected to save the time of GenFds about 2~3 seconds.
More details will be logged in BZ.
This is the summary measure data generated from python cProfile for
building Ovmf.
Currently:
8379147 function calls (8135450 primitive calls) in 12.580 seconds
After applying this patch:
3428712 function calls (3418881 primitive calls) in 8.944 seconds
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Carsey Jaben <jaben.carsey@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
V2:
Fixed the issue that V1 adds new check
to the Pcds in the platform unused library INF files.
It breaks the existing platform.
V1?
The current code handle all the structure pcds
even if there is no module or library use them.
This patch is going to filter out the unused structure pcds.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add dummy RPC handler for RPCs that are not implemented as control
should be returned back to OP-TEE in case any RPC is invoked.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
1) remove an identical function and import it from Common.LongFilePathSupport
2) remove an import that is not needed/used.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by : Bob Feng <bob.c.feng@intel.com>
The macro MAX_ADDRESS represents the largest virtual address that
is valid for a certain architecture. For the BaseTools, this quantity
is irrelevant, since the same tools can be used to build for different
targets.
Since we only refer to it in a single place, which is an ASSERT() that
doesn't seem particularly useful (it ensures that memcpy() will not
be called with arguments that will make it read beyond the end of the
address space and wrap around), let's drop the ASSERT and all references
to MAX_ADDRESS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The maximum value that can be represented by the native word size
of the *target* should be irrelevant when compiling tools that
run on the build *host*. So drop the definition of MAX_UINTN, now
that we no longer use it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Parsing a string into an integer variable of the native word size
is not defined for the BaseTools, since the same tools may be used
to build firmware for different targets with different native word
sizes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Replace the default size limit of IsDevicePathValid() with a value
that does not depend on the native word size of the build host.
4 GiB seems sufficient as the upper bound of a device path handled
by UEFI.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Since we will be dropping the definition of MAX_UINTN, whose meaning
is ambiguous for the BaseTools, add a definition of MAX_UINT32 that
we can switch to.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Replace invocations of StrHexToUintn() with StrHexToUint64(), so
that we can drop the former.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Don't use the native word size string to number parsing routines,
but instead, use the 64-bit one and cast to UINTN.
Currently, the only user is in Source/C/DevicePath/DevicePathFromText.c
which takes care to use Strtoi64 () unless it assumes the value fits
in 32-bit, so this change is a no-op even on 32-bit build hosts.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In the context of the BaseTools, there is no such thing as a native word
size, given that the same set of tools may be used to build a firmware
image consisting of both 32-bit and 64-bit modules.
So update StrToIpv4Address() and StrToIpv6Address() to use UINT64
types instead of UINTN types when parsing strings.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
As Yonghong has some other focus, change him from maintainer
to reviewer, Bob will be the new maintainer.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
QEMU/mach-virt is rather unhelpful when it comes to tracking down
NULL pointer dereferences that occur while running in UEFI: since
we have NOR flash mapped at address 0x0, inadvertent reads go
unnoticed, and even most writes are silently dropped, unless you're
unlucky and the instruction in question is one that KVM cannot
emulate, in which case you end up with a QEMU crash like this:
error: kvm run failed Function not implemented
PC=000000013f7ff804 X00=000000013f7ab108 X01=0000000000000064
X02=000000013f801988 X03=00000000800003c4 X04=0000000000000000
X05=0000000096000044 X06=fffffffffffd8270 X07=000000013f7ab4a0
X08=0000000000000001 X09=000000013f803b88 X10=000000013f7e88d0
X11=0000000000000009 X12=000000013f7ab554 X13=0000000000000008
X14=0000000000000002 X15=0000000000000000 X16=0000000000000000
X17=0000000000000000 X18=0000000000000000 X19=0000000000000000
X20=000000013f81c000 X21=000000013f7ab170 X22=000000013f81c000
X23=0000000009000018 X24=000000013f407020 X25=000000013f81c000
X26=000000013f803530 X27=000000013f802000 X28=000000013f7ab270
X29=000000013f7ab0d0 X30=000000013f7fee10 SP=000000013f7a6f30
PSTATE=800003c5 N--- EL1h
and a warning in the host kernel log that load/store instruction
decoding is not supported by KVM.
Given that the first page of the flash device is not actually
used anyway, let's reduce the mappings of the peripheral space
and the flash device (both of which cover page #0) to only cover
what is actually required:
ArmVirtQemu.fdf:
> 0x00001000|0x001ff000
> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
ArmVirtQemuKernel.fdf:
> 0x00008000|0x001f8000
> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
For ArmVirtQemu, the resulting virtual mapping looks roughly like:
- [0, 4K) : flash, unmapped
- [4K, 2M) : flash, mapped as WB+X RAM
- [2M, 64M) : flash, unmapped
- [64M, 128M) : varstore flash, will be mapped by the NOR flash driver
- [128M, 256M) : peripherals, mapped as device
- [256M, 1GB) : 32-bit MMIO aperture, translated IO aperture, ECAM,
will be mapped by the PCI host bridge driver
- [1GB, ...) : RAM, mapped.
After this change, any inadvertent read or write from/to the first
physical page will trigger a translation fault inside the guest,
regardless of the nature of the instruction, without crashing QEMU.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The primary FV contains the firmware boot image, which is not
runtime updatable in our case. So exposing it to the NOR flash
driver is undesirable, since it may attempt to modify the NOR
flash contents. It is also rather pointless, since we don't
keep anything there that we care to expose. (the SEC and PEI
phase modules are not executable from DXE context, and the
contents of the embedded DXE phase FV are exposed by the DXE
core directly via the FVB2 protocol)
So let's disregard the NOR flash block that covers the primary
FV.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The ARM ArmMmuLib code currently does not take into account that
setting permissions on a region should take into account that a
region may not be mapped yet to begin with.
So when updating a section descriptor whose old value is zero,
pass in the address explicitly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
GetMemoryRegion() is used to obtain the attributes of an existing
mapping, to permit permission attribute changes to be optimized
away if the attributes don't actually change.
The current ARM code assumes that a section mapping or a page mapping
exists for any region passed into GetMemoryRegion(), but the region
may be unmapped entirely, in which case the code will crash. So check
if a section mapping exists before dereferencing it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
PcdPrePiCpuMemorySize is no longer used so drop the declarations from
the package DEC file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
PcdPrePiCpuMemorySize is no longer used so drop the PCD overrides
from all platform descriptions in ArmVirtPkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Drop the reference to gEmbeddedTokenSpaceGuid.PcdPrePiCpuMemorySize
which is never used.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Drop some PCD references that are not actually referenced from the
PlatformPei code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Derive the size of the GCD memory space map directly from the CPU's
information registers rather than from the PcdPrePiCpuMemorySize PCD,
which will be removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Derive the size of the GCD memory space map directly from the CPU's
information registers rather than from the PcdPrePiCpuMemorySize PCD,
which will be removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Derive the size of the GCD memory space map directly from the CPU's
information registers rather than from the PcdPrePiCpuMemorySize PCD,
which will be removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Derive the size of the GCD memory space map directly from the CPU's
information registers rather than from the PcdPrePiCpuMemorySize PCD,
which will be removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In preparation of dropping PcdPrePiCpuMemorySize entirely, base the
maximum size of the identity map on the capabilities of the CPU.
Since that may exceed what is architecturally permitted when using
4 KB pages, take MAX_ADDRESS into account as well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Use the new ArmLib helper to read the CPU's physical address limit
so we can drop our own homecooked one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add a helper function that returns the maximum physical address space
size as supported by the current CPU.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
AArch64 supports the use of more than 48 bits for physical and/or
virtual addressing, but only if the page size is set to 64 KB,
which is not supported by UEFI. So redefine MAX_ADDRESS to cover
only 48 address bits.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Currently, we map DRAM as EFI_MEMORY_WB, and the remainder of the
entire virtual address space is mapped with EFI_MEMORY_UC attributes,
regardless of whether any devices actually reside there.
Now that we are relaxing the address space limit to more than 40 bits,
mapping all that address space actually takes up more space in page
tables than we have so far made available as temporary RAM. So let's
get rid of the mapping rather than increasing the available RAM, given
that the mapping is not particularly useful anyway.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Up until now, we have been getting away with not declaring the ECAM
and translated I/O spaces at all in the GCD memory map, simply because
we map the entire address space with device attributes in the early PEI
code, and so the ECAM space will be mapped wherever it ends up.
Now that we are about to make changes to how ArmVirtQemu reasons
about the size of the address space, it would be better to get rid
of this mapping of the entire address space, since it can get
arbitrarily large without real benefit.
So start by mapping the ECAM and translated I/O spaces explicitly,
instead of relying on the early PEI mapping.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Drop the declaration and the implementation of CreateHoblist(),
which is not used anywhere.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Remove this module: it is unused, and should not be used as an
example going forward.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
As Star has some other focus, change Star from maintainer
to reviewer, Jian will be the first maintainer, and add
Hao as the second maintainer.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Acked-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Jian J Wang <jian.j.wang@intel.com>
This function is exposed by the MemoryAllocationLib header.
An AllocateZeroPool() function has been added to fix modules depending on
this library and this function.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1297
When the header files are not found for the used C structure, this script will
report the warning, let user know there is no header file to define C structure.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wang BinX A <binx.a.wang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In V2, change his to the, and add new maintainers follow up.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
While this isn't the only Aarch64 directory in the tree, let's
keep from adding more of them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
ArmMmuStandaloneMmLib.inf cannot be built for ARM so move it to the
[Components.AARCH64] section in ArmPkg.dsc.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The Standalone MM environment runs in S-EL0 in AArch64 on ARM Standard
Platforms. Privileged firmware e.g. ARM Trusted Firmware sets up its
architectural context including the initial translation tables for the
S-EL1/EL0 translation regime. The MM environment will still request ARM
TF to change the memory attributes of memory regions during
initialization.
The Standalone MM image is a FV that encapsulates the MM foundation
and drivers. These are PE-COFF images with data and text segments.
To initialise the MM environment, Arm Trusted Firmware has to create
translation tables with sane default attributes for the memory
occupied by the FV. This library sends SVCs to ARM Trusted Firmware
to request memory permissions change for data and text segments.
This patch adds a simple MMU library suitable for execution in S-EL0 and
requesting memory permissions change operations from Arm Trusted Firmware.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
PI v1.5 Specification Volume 4 defines Management Mode Core Interface
and defines EFI_MM_COMMUNICATION_PROTOCOL. This protocol provides a
means of communicating between drivers outside of MM and MMI
handlers inside of MM.
This patch implements the EFI_MM_COMMUNICATION_PROTOCOL DXE runtime
driver for AARCH64 platforms. It uses SMCs allocated from the standard
SMC range defined in DEN0060A_ARM_MM_Interface_Specification.pdf
to communicate with the standalone MM environment in the secure world.
This patch also adds the MM Communication driver (.inf) file to
define entry point for this driver and other compile
related information the driver needs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This patch defines PCDs to describe the base address and size of
communication buffer between normal world (uefi) and standalone MM
environment in the secure world.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
We no longer use per-instance GUIDs to identify NOR flash banks so
there is no longer a need to define them. Drop the Guid member from
the NOR_FLASH_DESCRIPTION type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Thomas Abraham <thomas.abraham@arm.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1356
Current PcdVpdBaseAddress is 32bit static Pcd. NON SPI platform needs to
configure it as Dynamic PCD. Emulator platform (such as NT32) may set its
value to 64bit address.
To meet with this usage, 64bit DynamicEx PcdVpdBaseAddress64 is introduced.
If its value is not zero, it will be used.
If its value is zero, static PcdVpdBaseAddress will be used.
When NON SPI platform enables VPD PCD, they need to set PcdVpdBaseAddress64.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
NorFlashQemuLib is one of the last remaining drivers in ArmVirtPkg
that are not based on the device tree received from QEMU.
For ArmVirtQemu, this does not really matter, given that the NOR
flash banks are always the same: the PEI code is linked to execute
in place from flash bank #0, and the fixed varstore PCDs refer to
flash bank #1 directly.
However, ArmVirtQemuKernel can execute at any offset, permitting it
to be used as an intermediary loader when running QEMU with secure
world emulation enabled, in which case NOR flash bank #0 is secure
only and contains the secure world firmware. In this case,
NorFlashQemuLib should not expose the first flash bank at all.
To prevent introducing too much internal knowledge about which flash
bank is accessible under which circumstances, let's switch to using
the DTB to decide which flash banks to expose to the NOR flash driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
DT has a [pseudo-]standardized 'status' property that can be set on
any node, and which signifies that a node should be treated as
absent unless it is set to 'ok' or 'okay'. So take this into account
when iterating over nodes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Currently, each flash bank controlled by ArmPlatformPkg/NorFlashDxe
has its own VendorHw GUID, and instances of NorFlashPlatformLib
describe each bank to the driver, along with the GUID for each.
This works ok for bare metal platforms, but it would be useful for
virtual platforms if we could obtain this information from a
device tree, which would require us to invent GUIDs on the fly,
given that the 'cfi-flash' binding does not include a GUID.
So instead, let's switch to a single GUID for all flash banks,
and update the driver's device path handling to include an index
to identify each bank uniquely.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Thomas Abraham <thomas.abraham@arm.com>
A subsequent patch will change the layout of devicepath nodes
produced by this driver. In preparation, make some tweaks to
the code to use a packed struct for the devicepath and to pass
the device index to NorFlashCreateInstance(). These are cosmetic
changes only, the resulting binaries should be identical.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Thomas Abraham <thomas.abraham@arm.com>
The last remaining users of the BdsLib.h header reside in the
edk2-platforms tree, and so it has been copied there. This
allows us to remove the original from ArmPkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Remove unused module type restriction for NULL instance.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Remove the duplicated IScsiDxe driver from FDF; Add required shell libraries; Update SYSTEM_CONFIGURATION data structure.
Test: Install and boot Windows 10.
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: David Wei <david.wei@intel.com>
Print debug messages if size of the VariableName plus DataSize exceeds
Max(Auth|Voltaile)VariableSize bytes. The messages will be useful if any
platform specific value of Max(Auth|Voltaile)VariableSize PCDs have to
be changed.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Our poor man's implementation of EnterS3WithImmediateWake () currently
sets a high TPL level to disable interrupts, and simply calls the
PEI entrypoint again after disabling the MMU.
Unfortunately, this is not sufficient: DMA capable devices such as
network controllers or USB controllers may still be enabled and
writing to memory, e.g., in response to incoming network packets.
So instead, do the full ExitBootServices() dance: allocate space and
get the memory map, call ExitBootServices(), and in case it fails, get
the memory map again and call ExitBootServices() again. This ensures
that all cleanup related to DMA capable devices is performed before
doing the warm reset.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In function UiDisplayMenu, the NewPos ptr which used to point to the
highlight menu entry. It will always point to the menu entry which
need to be highlighted or the gMenuOption menu if the highlight menu
is not found.
So we can remove the NULL ptr check for NewPos in this function.
And add the ASSERT code to avoid if any false positive reports
of NULL pointer dereference issue raised from static analysis.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BAR | std vga | vmsvga
---------------------------------
0 | Framebuffer | I/O space
1 | Reserved | Framebuffer
2 | MMIO | FIFO
- We cannot recognize VMW SVGA as BOCHS because that would confuse the
IsQxl setting in QemuVideoControllerDriverStart(),
- We cannot recognize VMW SVGA as BOCHS_MMIO because BAR2 on VMW SVGA is
not the BOCHS MMIO BAR (we can only use port IO).
Therefore the list of reasons for which we should introduce
QEMU_VIDEO_VMWARE_SVGA should name three reasons:
(1) Get framebuffer from correct PCI BAR
(2) Prevent using BAR2 for MMIO
(3) Prevent mis-recognizing VMW SVGA as QXL
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
This reverts commit 05a5379458.
The VMWare SVGA display device implemented by Qemu (-vga vmware) uses
an I/O-type BAR which is laid out such that some register offsets are
not aligned to the read/write width with which they are expected to be
accessed. However, we reverted the initialization of VMWare SVGA device,
we don't need such unaligned I/O.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
(cherry picked from commit 438ada5aa5)
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This reverts commit c137d95081.
The VMWare SVGA model now -- since commit 104bd1dc70 in QEMU --
falls back to stdvga (that is, Bochs) if we don't setup VMWare SVGA
FIFO.
To simplify QemuVideoDxe, we don't intend to implement the VMWare SVGA
FIFO setup feature. It means our current VMW SVGA driver code is
basically dead. To simplify the problem, we will replace the old
VMWare SVGA driver to Bochs interface. It should work on all QEMU
version.
The first step for using Bochs interface is to revert old driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
(cherry picked from commit 98856a724c)
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This reverts commit b2959e9f1a.
The VMWare SVGA display device implemented by Qemu (-vga vmware) uses
an I/O-type BAR which is laid out such that some register offsets are
not aligned to the read/write width with which they are expected to be
accessed. However, we will revert the initialization of VMWare SVGA
device later, we don't need such unaligned I/O.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
(cherry picked from commit e038bde267)
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Some SdMmc host controllers are run by clocks with different
frequency than it is reflected in Capabilities Register 1.
It is allowed by SDHCI specification ver. 4.2 - if BaseClkFreq
field value of the Capability Register 1 is zero, the clock
frequency must be obtained via another method.
Because the bitfield is only 8 bits wide, a maximum value
that could be obtained from hardware is 255MHz.
In case the actual frequency exceeds 255MHz, the 8-bit BaseClkFreq
member of SD_MMC_HC_SLOT_CAP structure occurs to be not sufficient
to be used for setting the clock speed in SdMmcHcClockSupply
function.
This patch adds new UINT32 array ('BaseClkFreq[]') to
SD_MMC_HC_PRIVATE_DATA structure for specifying
the input clock speed for each slot of the host controller.
All routines that are used for clock configuration are
updated accordingly.
This patch also adds new IN OUT BaseClockFreq field
in the Capability callback of the SdMmcOverride,
protocol which allows to update BaseClkFreq value.
The patch reuses original commit from edk2-platforms:
20f6f144d3a8 ("Marvell/Drivers: XenonDxe: Allow overriding base clock
frequency")
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Some SD Host Controlers need to do additional operations after clock
frequency switch.
This patch add new callback type to NotifyPhase of the SdMmcOverride
protocol. It is called after SdMmcHcClockSupply.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Some SD Host Controllers use different values in Host Control 2 Register
to select UHS Mode. This patch adds a new UhsSignaling type routine to
the NotifyPhase of the SdMmcOverride protocol.
UHS signaling configuration is moved to a common, default routine
(SdMmcHcUhsSignaling). After it is executed, the protocol producer
can override the values if needed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
In order to ensure bigger flexibility in the NotifyPhase
routine of the SdMmcOverride protocol, enable using an
optional phase-specific data. This will allow to exchange
more information between the protocol producer driver
and SdMmcPciHcDxe in the newly added callbacks.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1300
Provides PCD selection for FSP Wrapper to support Dispatch
mode. Also PcdFspmBaseAddress should support Dynamic for
recovery scenario (multiple FSP-M binary in flash)
Test: Verified on internal platform and both API and
DISPATCH modes booted successfully.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Desimone Nathaniel L <nathaniel.l.desimone@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
When setting up the stack in the startup code and jumping into C code
for the first time, ensure that the frame pointer register is cleared
so that backtraces terminate correctly. Otherwise, output like the
below is shown when encountering an exception on a DEBUG build:
Synchronous Exception at 0x0000000078A14780
PC 0x000078A14780 (0x000078A00000+0x00014780) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A10634 (0x000078A00000+0x00010634) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A11CF0 (0x000078A00000+0x00011CF0) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A11DD0 (0x000078A00000+0x00011DD0) [ 0] ArmVeNorFlashDxe.dll
PC 0x00007BC9D87C (0x00007BC98000+0x0000587C) [ 1] PartitionDxe.dll
PC 0x00007BC99B3C (0x00007BC98000+0x00001B3C) [ 1] PartitionDxe.dll
PC 0x00007F362F50 (0x00007F359000+0x00009F50) [ 2] DxeCore.dll
PC 0x00007BD63BB0 (0x00007BD5B000+0x00008BB0) [ 3] BdsDxe.dll
PC 0x00007BD6EE00 (0x00007BD5B000+0x00013E00) [ 3] BdsDxe.dll
PC 0x00007BD67C70 (0x00007BD5B000+0x0000CC70) [ 3] BdsDxe.dll
PC 0x00007F3724F0 (0x00007F359000+0x000194F0) [ 4] DxeCore.dll
PC 0x00004008FC30
PC 0x000040090130
PC 0x5800F6025800F5E1
Recursive exception occurred while dumping the CPU state
which is rather unhelpful, given that this prevent the remaining debug
output from being printed (register dump, stack dump, fault related
system registers etc)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
When setting up the stack in the startup code and jumping into C code
for the first time, ensure that the frame pointer register is cleared
so that backtraces terminate correctly. Otherwise, output like the
below is shown when encountering an exception on a DEBUG build:
Synchronous Exception at 0x0000000078A14780
PC 0x000078A14780 (0x000078A00000+0x00014780) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A10634 (0x000078A00000+0x00010634) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A11CF0 (0x000078A00000+0x00011CF0) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A11DD0 (0x000078A00000+0x00011DD0) [ 0] ArmVeNorFlashDxe.dll
PC 0x00007BC9D87C (0x00007BC98000+0x0000587C) [ 1] PartitionDxe.dll
PC 0x00007BC99B3C (0x00007BC98000+0x00001B3C) [ 1] PartitionDxe.dll
PC 0x00007F362F50 (0x00007F359000+0x00009F50) [ 2] DxeCore.dll
PC 0x00007BD63BB0 (0x00007BD5B000+0x00008BB0) [ 3] BdsDxe.dll
PC 0x00007BD6EE00 (0x00007BD5B000+0x00013E00) [ 3] BdsDxe.dll
PC 0x00007BD67C70 (0x00007BD5B000+0x0000CC70) [ 3] BdsDxe.dll
PC 0x00007F3724F0 (0x00007F359000+0x000194F0) [ 4] DxeCore.dll
PC 0x00004008FC30
PC 0x000040090130
PC 0x5800F6025800F5E1
Recursive exception occurred while dumping the CPU state
which is rather unhelpful, given that this prevent the remaining debug
output from being printed (register dump, stack dump, fault related
system registers etc)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
SdReadWrite can be called with a NULL Token for synchronous operations.
Add guard for DEBUG print to only print event pointer with Token is not
NULL.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Fix a typo in the 32-bit ARM version of the GICv3 driver, which uses
the wrong system register encoding to access ICC_IAR1, and attempted
to access ICC_IAR0 instead. This results in boot time hangs both
under QEMU emulation and on real hardware.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
BaseIoLibIntrinsicArmVirt was created to prevent LTO from merging
accesses to MMIO regions, resulting in instructions with multiple
output registers that KVM on ARM cannot emulate (since the exception
syndrome information that KVM relies on can only describe a single
output register)
However, using double word loads on ARM amounts to the same thing,
and so code that relies on doing 64-bit MMIO to regions that are
emulated under KVM (such as the GICv3 TYPER register) will still
suffer from the original issue.
So replace ldrd and strd with equivalent two instruction sequences.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1305
The patch reverts commit 1ed6498c4a
* UefiCpuPkg/CommonFeature: Skip locking when the feature is disabled
FEATURE_CONTROL.Lock bit is controlled by feature
CPU_FEATURE_LOCK_FEATURE_CONTROL_REGISTER. The commit 1ed649 fixes
a bug that when the feature is disabled, the Lock bit is cleared.
But it's a security hole if the bit is cleared when booting OS.
We can argue that platform needs to make sure the value
of PcdCpuFeaturesUserConfiguration should be set properly to make
sure feature CPU_FEATURE_LOCK_FEATURE_CONTROL_REGISTER is enabled.
But it's better to guarantee this in the generic core code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1142
The fix is similar to commit ebb6c7633b.
We found that a similar fix should be applied to the NVMe PEI driver as
well. Hence, this one is for the PEI counterpart driver.
According to the the NVM Express spec Revision 1.1, for some commands
(like Get/Set Feature Command, Figure 89 & 90 of the spec), the Memory
Buffer maybe optional although the command opcode indicates there is a
data transfer between host & controller (Get/Set Feature Command, Figure
38 of the spec).
Hence, this commit refine the checks for the 'TransferLength' and
'TransferBuffer' field of the
EDKII_PEI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET structure to address this
issue.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
This reverts commit 8cd4e734cc.
It is not a real bug fix. It should not be pushed after
Hard Feature Freeze for edk2-stable201811 tag.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Bi Dandan <dandan.bi@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1312
Text format for AcpiEx device path in UEFI Spec:
AcpiEx(HID,CID,UID,HIDSTR,CIDSTR,UIDSTR)
AcpiEx(HID|HIDSTR,(CID|CIDSTR,UID|UIDSTR))(Display Only)
When convert device path to text for AcpiEx device path,
current code check AllowShortcuts parameter to convert
the device path to DisplayOnly text format(shorter text
representation) by mistake.
It should check DisplayOnly parameter.
This commit is to fix this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In current implementation, core and package level sync uses same semaphores.
Sharing the semaphore may cause wrong execution order.
For example:
1. Feature A has CPU_FEATURE_CORE_BEFORE dependency with Feature B.
2. Feature C has CPU_FEATURE_PACKAGE_AFTER dependency with Feature B.
The expected feature initialization order is A B C:
A ---- (Core Depends) ----> B ---- (Package Depends) ----> C
For a CPU has 1 package, 2 cores and 4 threads. The feature initialization
order may like below:
Thread#1 Thread#2 Thread#3 Thread#4
[A.Init] [A.Init] [A.Init]
Release(S1, S2) Release(S1, S2) Release(S3, S4)
Wait(S1) * 2 Wait(S2) * 2 <------------------------------- Core sync
[B.Init] [B.Init]
Release (S1,S2,S3,S4)
Wait (S1) * 4 <----------------------------------------------------- Package sync
Wait(S4 * 2) <- Core sync
[B.Init]
In above case, for thread#4, when it syncs in core level, Wait(S4) * 2 isn't
blocked and [B.Init] runs. But [A.Init] hasn't run in thread#3. It's wrong!
Thread#4 should execute [B.Init] after thread#3 executes [A.Init] because B
core level depends on A.
The reason of the wrong execution order is that S4 is released in thread#1
by calling Release (S1, S2, S3, S4) and in thread #4 by calling
Release (S3, S4).
To fix this issue, core level sync and package level sync should use separate
semaphores.
In above example, the S4 released in Release (S1, S2, S3, S4) should not be the
same semaphore as that in Release (S3, S4).
Related BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1311
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
In current implementation, core and package level sync uses same semaphores.
Sharing the semaphore may cause wrong execution order.
For example:
1. Feature A has CPU_FEATURE_CORE_BEFORE dependency with Feature B.
2. Feature C has CPU_FEATURE_PACKAGE_AFTER dependency with Feature B.
The expected feature initialization order is A B C:
A ---- (Core Depends) ----> B ---- (Package Depends) ----> C
For a CPU has 1 package, 2 cores and 4 threads. The feature initialization
order may like below:
Thread#1 Thread#2 Thread#3 Thread#4
[A.Init] [A.Init] [A.Init]
Release(S1, S2) Release(S1, S2) Release(S3, S4)
Wait(S1) * 2 Wait(S2) * 2 <------------------------------- Core sync
[B.Init] [B.Init]
Release (S1,S2,S3,S4)
Wait (S1) * 4 <----------------------------------------------------- Package sync
Wait(S4 * 2) <- Core sync
[B.Init]
In above case, for thread#4, when it syncs in core level, Wait(S4) * 2 isn't
blocked and [B.Init] runs. But [A.Init] hasn't run in thread#3. It's wrong!
Thread#4 should execute [B.Init] after thread#3 executes [A.Init] because B
core level depends on A.
The reason of the wrong execution order is that S4 is released in thread#1
by calling Release (S1, S2, S3, S4) and in thread #4 by calling
Release (S3, S4).
To fix this issue, core level sync and package level sync should use separate
semaphores.
In above example, the S4 released in Release (S1, S2, S3, S4) should not be the
same semaphore as that in Release (S3, S4).
Related BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1311
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
V2 changes:
V1 change has regression which caused by change feature order.
V2 changes logic to detect dependence not only for the
neighborhood features. It need to check all features in the list.
V1 Changes:
In current code logic, only adjust feature position if current
CPU feature position not follow the request order. Just like
Feature A need to be executed before feature B, but current
feature A registers after feature B. So code will adjust the
position for feature A, move it to just before feature B. If
the position already met the requirement, code will not adjust
the position.
This logic has issue when met all below cases:
1. feature A has core or package level dependence with feature B.
2. feature A is register before feature B.
3. Also exist other features exist between feature A and B.
Root cause is driver ignores the dependence for this case, so
threads may execute not follow the dependence order.
Fix this issue by change code logic to adjust feature position
for CPU features which has dependence relationship.
Related BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1311
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
In function UiDisplayMenu, the NewPos ptr which used to point to the
highlight menu entry. It will always point to the menu entry which
need to be highlighted or the gMenuOption menu if the highlight menu
is not found.
So we can remove the NULL ptr check for NewPos in this function.
And add the ASSERT code to avoid if any false positive reports
of NULL pointer dereference issue raised from static analysis.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1303
Today's code generates assembly code as below for
InternalSyncIncrement:
__asm__ __volatile__ (
"movl $1, %%eax \n\t"
"lock \n\t"
"xadd %%eax, %1 \n\t"
"inc %%eax \n\t"
: "=a" (Result), // %0
"+m" (*Value) // %1
: // no inputs that aren't also outputs
: "memory",
"cc"
);
0: 55 pushl %ebp
1: 89 e5 movl %esp, %ebp
3: 8b 45 08 movl 8(%ebp), %eax
6: b8 01 00 00 00 movl $1, %eax
b: f0 lock
c: 0f c1 00 xaddl %eax, _InternalSyncIncrement(%eax)
f: 40 incl %eax
10: 5d popl %ebp
11: c3 retl
Line #3 and Line #6 both use EAX as destination register.
Line #c uses EAX and (EAX).
The output operand "=a" tells GCC that EAX is used for output.
But GCC only assumes that EAX will be used in the very last
instruction.
Per GCC document,
"Use the '&' constraint modifier on all output operands that must
not overlap an input. Otherwise, GCC may allocate the output
operand in the same register as an unrelated input operand, on
the assumption that the assembler code consumes its inputs before
producing outputs. This assumption may be false if the assembler
code actually consists of more than one instruction."
"=&a" should be used to tell GCC not use EAX before the assembly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: 8a94eb9283
Fixes: 17634d026f
When static paging is disabled, page table for below 4GB is created
and page table for above 4GB is created dynamically in page fault
handler.
Today's implementation only allow SMM access-out to below types of
memory address no matter static paging is enabled or not:
1. Reserved, run time and ACPI NVS type
2. MMIO
But certain platform feature like RAS may need to access other types
of memory from SMM. Today's code blocks these platforms.
This patch simplifies the policy to only block when static paging
is used so that the static paging can be disabled in these platforms
to meet their SMM access-out need.
Setting PcdCpuSmmStaticPageTable to FALSE can disable the static
paging.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Setting GICD_IROUTERn.IRM and GICD_IROUTERn.{Aff3,Aff2,Aff1,Aff0}
at the same time is nonsensical (see 8.9.13 in the GICv3 spec, which
says of GICD_IROUTERn.IRM that "When this bit is set to 1,
GICD_IROUTER<n>.{Aff3,Aff2,Aff1,Aff0} are UNKNOWN"). There is also no
guarantee that IRM is implemented (see GICD_TYPER.No1N which indicates
whether the implementation supports this or not).
Let's thus not set this bit, as we want all SPIs to be delivered to the
same CPU, and not be broadcast to all of them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <ming.huang@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1295
This issue originates from following patch which allows to enable
paging if PcdImageProtectionPolicy and PcdDxeNxMemoryProtectionPolicy
(in addition to PcdSetNxForStack) are set to enable related features.
5267926134
Due to above change, PcdImageProtectionPolicy will be set to 0 by
default in many platforms, which, in turn, cause following code in
MdeModulePkg\Core\Dxe\Misc\MemoryProtection.c fail the creation of
notify event of CpuArchProtocol.
1138: if (mImageProtectionPolicy != 0 ||
PcdGet64 (PcdDxeNxMemoryProtectionPolicy) != 0) {
1139: Status = CoreCreateEvent (
...
1142: MemoryProtectionCpuArchProtocolNotify,
...
1145: );
Then following call flow won't be done and Guard pages will not be
set as not-present in SetAllGuardPages() eventually.
MemoryProtectionCpuArchProtocolNotify()
=> HeapGuardCpuArchProtocolNotify()
=> SetAllGuardPages()
The solution is removing the if(...) statement so that the notify
event will always be created and registered. This won't cause
unnecessary code execution because, in the notify event handler,
the related PCDs like
PcdImageProtectionPolicy and
PcdDxeNxMemoryProtectionPolicy
will be checked again before doing related jobs.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
At the end of of MemoryProtectionCpuArchProtocolNotify there's cleanup
code to free resource. But at line 978, 994, 1005 the function returns
directly. This patch use "goto" to replace "return" to make sure the
resource is freed before exit.
1029: CoreCloseEvent (Event);
1030: return;
There's another memory leak after calling gBS->LocateHandleBuffer() in
the same function:
Status = gBS->LocateHandleBuffer (
ByProtocol,
&gEfiLoadedImageProtocolGuid,
NULL,
&NoHandles,
&HandleBuffer
);
HandleBuffer is allocated in above call but never freed. This patch
will also add code to free it.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1305
Today's code unconditionally sets the IA32_FEATURE_CONTROL.Lock to 1
no matter the feature is enabled or not.
The patch fixes this issue by only setting the Lock bit to 1 when
the feature is enabled.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
This reverts commit 05a5379458.
The VMWare SVGA display device implemented by Qemu (-vga vmware) uses
an I/O-type BAR which is laid out such that some register offsets are
not aligned to the read/write width with which they are expected to be
accessed. However, we reverted the initialization of VMWare SVGA device,
we don't need such unaligned I/O.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
This reverts commit c137d95081.
The VMWare SVGA model now -- since commit 104bd1dc70 in QEMU --
falls back to stdvga (that is, Bochs) if we don't setup VMWare SVGA
FIFO.
To simplify QemuVideoDxe, we don't intend to implement the VMWare SVGA
FIFO setup feature. It means our current VMW SVGA driver code is
basically dead. To simplify the problem, we will replace the old
VMWare SVGA driver to Bochs interface. It should work on all QEMU
version.
The first step for using Bochs interface is to revert old driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
This reverts commit b2959e9f1a.
The VMWare SVGA display device implemented by Qemu (-vga vmware) uses
an I/O-type BAR which is laid out such that some register offsets are
not aligned to the read/write width with which they are expected to be
accessed. However, we will revert the initialization of VMWare SVGA
device later, we don't need such unaligned I/O.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
[-c <retry count>] is to define the number of times to transmit request
packets and wait for a response. The default value is 6. But it doesn't
specify the behavior of zero value. Here, The patch is to clear that:
Set to zero also means to use the default value.
Cc: Carsey Jaben <jaben.carsey@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
This patch is to fix the invalid setting of MTFTP local port. The
issue can be reproduced by tftp shell command by using [-l port]
option.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
V2:
Add missed library instance for NetworkPkg iSCSI driver.
This patch replaces the MdeModulePkg TCP, PXE and iSCSI driver with those
ones in NetworkPkg. These 3 drivers in MdeModulePkg are not being actively
maintained and will be removed from edk2 master soon.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
V2:
Add missed library instance for NetworkPkg iSCSI driver.
This patch replaces the MdeModulePkg TCP, PXE and iSCSI driver with those
ones in NetworkPkg. These 3 drivers in MdeModulePkg are not being actively
maintained and will be removed from edk2 master soon.
Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>
This patch replaces the MdeModulePkg TCP, PXE and iSCSI driver with those
ones in NetworkPkg. These 3 drivers in MdeModulePkg are not being actively
maintained and will be removed from edk2 master soon.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This patch replaces the MdeModulePkg TCP, PXE and iSCSI driver with those
ones in NetworkPkg. These 3 drivers in MdeModulePkg are not being actively
maintained and will be removed from edk2 master soon.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
V3:
Update the patch to avoid "reduce" function fail.
V2:
Support to extract the common cc flag from a
combined cc flag string. For example
MSFT:*_*_IA32_CC_FLAGS = /D DISABLE_NEW_DEPRECATED_INTERFACES /DDEF_IA32
MSFT:*_*_X64_CC_FLAGS = /DDEF_X64 /D DISABLE_NEW_DEPRECATED_INTERFACES
V1:
Use common cc flags for building PcdValueInit. The common
cc flags include the cc flag which is under common arch and
under all build arches.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Update aslc rule to rename the temp output file from .efi to .pecoff.
This change can avoid the conflict .efi file name in output directory.
One is the driver image, another is aslc temp output file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Provide fully-qualified path to shell scripts
Section 3.6.2 of version 2.2 of the shell specification requires that
the first positional argument (i.e. arg 0) of a shell script resolves
to "the full path name of the script itself."
Ensure that the startup script and any scripts launched by the shell
meet this requirement.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Add a function to return a clean, fully-qualified version of some path.
This function handles a (possibly "dirty") input path that may or may
not include a file system reference.
If it does not include a file system reference, then if the input path
does not begin with a forward or backward slash, then the input path is
relative to the current working directory of the current file system.
Otherwise, it is an absolute path within the current file system.
If it does include a file system reference, it may be a reference to the
current or some other file system. If the file system reference is not
immediately followed by a forward or backward slash, then the input path
is relative to the current working directory of the given file system.
Otherwise, it is an absolute path within the given file system.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In some special cases, after BSP sends Init-sipi-sipi signal
AP needs more time to start the Ap procedure. In this case
BSP may think AP has finished its task but in fact AP hasn't began
yet.
Rollback former change to keep the status which only be used
when AP really finished task.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
According to PCD_DATABASE_INIT in
edk2\MdeModulePkg\Include\Guid\PcdDataBaseSignatureGuid.h,
the max size for string PCD should not exceed USHRT_MAX 65535(0xffff).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Replace the current NULL pointer dereference to retrieve Field's
offset with a call to OFFSET_OF(). This is implemented via
__builtin_offsetof for GCC and Clang, which eliminates UB caught by
Clang UndefinedBehaviorSanitizer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
GCC link script is used to discard the unused section data from ELF image.
ASLDLINK_FLAGS requires it to remove the unnecessary section data, then
GenFw can be used to retrieve the correct data section from ELF image.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
This patch is going to add a check that only if the
attribute of a EFI variable include 'NV', it will be
added into PcdNvStoreDefaultValueBuffer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The recent changes in these three source files introduce the trailing space.
This patch removes them to follow edk2 coding style.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Today's PiSmmIpl implementation initially sets SMRAM to WB to speed
up the SMM core/modules loading before SMM CPU driver runs.
When SMM CPU driver runs, PiSmmIpl resets the SMRAM to UC. It's done
in SmmIplDxeDispatchEventNotify(). COMM_BUFFER_SMM_DISPATCH_RESTART
is returned from SMM core that SMM CPU driver is just dispatched.
Since now the SMRR is widely used to control the SMRAM cache setting.
It's not needed to reset the SMRAM to UC anymore.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1275
The LookupFreeMemRegion() in RuntimeMemAllocate.c is used to look-up
free memory region for runtime resource allocation, which was designed
to support runtime authenticated variable service.
The ReqPages in this function is the required pages to be allocated,
which depends on the malloc() call in internal OpenSSL routines. The
direct offset subtractions on ReqPages may bring possible integer
overflow issue.
This patch is to add the extra parameter checks to remove this possible
overflow risk.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Long Qin <qin.long@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Build UefiCpuPkg with below configuration:
Architecture(s) = IA32
Build target = NOOPT
Toolchain = VS2015x86
Below error info shows up:
DxeRegisterCpuFeaturesLib.lib(CpuFeaturesInitialize.obj) :
error LNK2001: unresolved external symbol __allmul
Valid mDependTypeStr type only have 5 items, use UINT32 type cast
to fix this error.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1279
For function ResolveSymlink(), the below codes:
if (CompareMem ((VOID *)&PreviousFile, (VOID *)Parent,
sizeof (UDF_FILE_INFO)) != 0) {
CleanupFileInformation (&PreviousFile);
}
CopyMem ((VOID *)&PreviousFile, (VOID *)File, sizeof (UDF_FILE_INFO));
If the contents in 'PreviousFile' and 'File' are the same, call to
"CleanupFileInformation (&PreviousFile);" will free the buffers in 'File'
as well. This will lead to potential memory double free/use after free
issues.
This commit will add additional check to address the above issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1279
The content within 'File' is the output data for ResolveSymlink(). This
commit will add checks to ensure the content in 'File' is valid.
Otherwise, possible null pointer dereference issue will occur during the
subsequent usage of the data returned by ResolveSymlink().
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Index is initialized to MAX_UINT16 as default failure value, which
is what the ASSERT is supposed to test for. The ASSERT condition
however can never return FALSE for INT16 != int, as due to
Integer Promotion[1], Index is converted to int, which can never
result in -1.
Furthermore, Index is used as a for loop index variable inbetween its
initialization and the ASSERT, so the value is unconditionally
overwritten too.
Fix the ASSERT check to compare Index to its upper boundary, which it
will be equal to if the loop was not broken out of on success.
[1] ISO/IEC 9899:2011, 6.5.9.4
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Index is initialized to MAX_UINT16 as default failure value, which
is what the ASSERT is supposed to test for. The ASSERT condition
however can never return FALSE for INT16 != int, as due to
Integer Promotion[1], Index is converted to int, which can never
result in -1.
Furthermore, Index is used as a for loop index variable inbetween its
initialization and the ASSERT, so the value is unconditionally
overwritten too.
Fix the ASSERT check to compare Index to its upper boundary, which it
will be equal to if the loop was not broken out of on success.
[1] ISO/IEC 9899:2011, 6.5.9.4
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1286
This issue is introduced by bb685071c2.
The *MemorySpaceMap assigned with NULL (line 1710) value might be
accessed (line 1726/1730) without any sanity check. Although it won't
happen in practice because of line 1722, we still need to add check
against NULL to make static code analyzer happy.
1710 *MemorySpaceMap = NULL;
.... ...
1722 if (DescriptorCount == *NumberOfDescriptors) {
.... ...
1726 Descriptor = *MemorySpaceMap;
.... ...
1730 BuildMemoryDescriptor (Descriptor, Entry);
Tests:
Pass build and boot to shell.
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
When (Len < Offset) is TRUE, indicating the data to visit is beyond
the boundary, the error message is printed but the function doesn't
return NULL.
It's a typo when modifying the commit 4c034bf62.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Today's implementation doesn't check whether the length of
descriptor is valid before using it.
The patch fixes this issue by syncing the similar fix to UsbBusDxe.
70c3c2370a
*MdeModulePkg/UsbBus: Reject descriptor whose length is bad
Additionally the patch also rejects the data when length is
larger than sizeof (PeiUsbDevice->ConfigurationData).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Today's implementation reads the Type/Length field in the USB
descriptors data without checking whether the offset to read is
beyond the data boundary.
The patch fixes this issue by syncing the fix in commit
4c034bf62c
*MdeModulePkg/UsbBus: Fix out-of-bound read access to descriptors
ParsedBytes in UsbBusPei.GetExpectedDescriptor() is different from
Consumed in UsbBusDxe.UsbCreateDesc().
ParsedBytes is the offset of found descriptor while Consumed is
offset of next descriptor of found one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
The block returned from Mtftp6RemoveBlockNum is not the total received and
saved block number if it works in passive (Slave) mode.
The issue was exposed by the EMS test.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The block returned from Mtftp4RemoveBlockNum is not the total received and
saved block number if it works in passive (Slave) mode.
The issue was exposed by the EMS test.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1274
In current code, EhcMonitorAsyncRequests (timer handler) will do
unmap and map operations for AsyncIntTransfers to "Flush data from
PCI controller specific address to mapped system memory address".
EhcMonitorAsyncRequests
EhcFlushAsyncIntMap
PciIo->Unmap
IoMmu->SetAttribute
PciIo->Map
IoMmu->SetAttribute
This may impact the boot performance.
Since the data buffer for EhcMonitorAsyncRequests is internal
buffer, we can allocate common buffer by PciIo->AllocateBuffer
and map the buffer with EfiPciIoOperationBusMasterCommonBuffer,
then the unmap and map operations can be removed.
///
/// Provides both read and write access to system memory by
/// both the processor and a bus master. The buffer is coherent
/// from both the processor's and the bus master's point of view.
///
EfiPciIoOperationBusMasterCommonBuffer,
Test done:
USB KB works normally.
USB disk read/write works normally.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
V3:
Call XhcFreeUrb after XhcCreateTransferTrb fails in XhcCreateTrb.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1274
In current code, XhcMonitorAsyncRequests (timer handler) will do
unmap and map operations for AsyncIntTransfers to "Flush data from
PCI controller specific address to mapped system memory address".
XhcMonitorAsyncRequests
XhcFlushAsyncIntMap
PciIo->Unmap
IoMmu->SetAttribute
PciIo->Map
IoMmu->SetAttribute
This may impact the boot performance.
Since the data buffer for XhcMonitorAsyncRequests is internal
buffer, we can allocate common buffer by PciIo->AllocateBuffer
and map the buffer with EfiPciIoOperationBusMasterCommonBuffer,
then the unmap and map operations can be removed.
///
/// Provides both read and write access to system memory by
/// both the processor and a bus master. The buffer is coherent
/// from both the processor's and the bus master's point of view.
///
EfiPciIoOperationBusMasterCommonBuffer,
Test done:
USB KB works normally.
USB disk read/write works normally.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
V3:
Match function parameter name and description between
XhciSched.c and XhciSched.h.
V2:
Add the missing "FreePool (Data);".
Remove the unnecessary indentation change.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1274
Extract new XhciInsertAsyncIntTransfer function from
XhcAsyncInterruptTransfer.
It is code preparation for following patch,
no essential functional change.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
This reverts commit 51d17bb7b0.
commit 51d17bb7b0 adds new check
of Pcds in the platform unused library INF files.
It breaks the existing platform.
To avoid the impact, roll back this change first.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob C Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1235
When update contents in HiiDatabase, like:
1. Add/update/remove package list
2. Add/update string
3. Add/update image
We should make these operations atomic to prevent the
potential issue that the one update operation with
higher TPL may interrupt another.
This commit is to make the HiiDatabase update behaviors
atomic by adding EfiAcquireLock/EfiReleaseLock function.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1235
Function "HiiGetConfigurationSetting" may be called
when HiiDatabase contents have been updated.
And it is just to call function "HiiGetDatabaseInfo" to
get the contents in HiiDatabase and call function
"HiiGetConfigRespInfo" and get the configuration response
string form HII drivers.
So here we can remove function "HiiGetConfigurationSetting"
and make caller to call "HiiGetDatabaseInfo" and
"HiiGetConfigRespInfo" directly.
And thus it also can distinguish which code blocks are to
operate HiiDatabase contents and which code blocks are not.
Then it's easy to know which code blocks should be atomic
when updating HiiDatabase contents.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Roll back code modify by commit 9e47e6f908,
if ForceRebase not False or True, the GenFv command not need add parameter
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Current code assume only one dependence (before or after) for one
feature. Enhance code logic to support feature has two dependence
(before and after) type.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Code initialized in function can't be correctly detected by build tool.
Add code to clearly initialize the local variable before use it.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Changes include:
1. Remove extra white space at the end of line.
2. Add comments for the new add function parameter.
3. Update IN OUT tag for function parameter.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Code initialized in function can't be correctly detected by build tool.
Add code to clearly initialize the local variable before use it.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Freed-memory guard is used to detect UAF (Use-After-Free) memory issue
which is illegal access to memory which has been freed. The principle
behind is similar to pool guard feature, that is we'll turn all pool
memory allocation to page allocation and mark them to be not-present
once they are freed.
This also implies that, once a page is allocated and freed, it cannot
be re-allocated. This will bring another issue, which is that there's
risk that memory space will be used out. To address it, the memory
service add logic to put part (at most 64 pages a time) of freed pages
back into page pool, so that the memory service can still have memory
to allocate, when all memory space have been allocated once. This is
called memory promotion. The promoted pages are always from the eldest
pages which haven been freed.
This feature brings another problem is that memory map descriptors will
be increased enormously (200+ -> 2000+). One of change in this patch
is to update MergeMemoryMap() in file PropertiesTable.c to allow merge
freed pages back into the memory map. Now the number can stay at around
510.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This issue is hidden in current code but exposed by introduction
of freed-memory guard feature due to the fact that the feature
will turn all pool allocation to page allocation.
The solution is moving the memory allocation in CoreGetMemorySpaceMap()
to be out of the GCD memory map lock.
CoreDumpGcdMemorySpaceMap()
=> CoreGetMemorySpaceMap()
=> CoreAcquireGcdMemoryLock () *
AllocatePool()
=> InternalAllocatePool()
=> CoreAllocatePool()
=> CoreAllocatePoolI()
=> CoreAllocatePoolPagesI()
=> CoreAllocatePoolPages()
=> FindFreePages()
=> PromoteMemoryResource()
=> CoreAcquireGcdMemoryLock() **
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The freed-memory guard feature will cause a recursive calling
of InitializePageTablePool(). This is due to a fact that
AllocateAlignedPages() is used to allocate page table pool memory.
This function will most likely call gBS->FreePages to free unaligned
pages and then cause another round of page attributes change, like
below (freed pages will be always marked not-present if freed-memory
guard is enabled)
FreePages() <===============|
=> CpuSetMemoryAttributes() |
=> <if out of page table> |
=> InitializePageTablePool() |
=> AllocateAlignedPages() |
=> FreePages() ================|
The solution is add a global variable as a lock in page table pool
allocation function and fail any other requests if it has not been
done.
Since this issue will only happen if free-memory guard is enabled,
it won't affect CpuSetMemoryAttributes() in default build of a BIOS.
If free-memory guard is enabled, it only affect the pages
(failed to mark them as not-present) freed in AllocateAlignedPages().
Since those freed pages haven't been used yet (their addresses not
yet exposed to code outside AllocateAlignedPages), it won't compromise
the freed-memory guard feature.
This change will just fail the CpuSetMemoryAttributes() called from
FreePages() but it won't fail the FreePages(). So the error status
won't be propagated upper layer of code.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Non-stop mode was introduced / explained in commit 8f2613628a
("MdeModulePkg/MdeModulePkg.dec: add new settings for PCDs",
2018-08-30).
The macro HEAP_GUARD_NONSTOP_MODE was added to CpuDxe in commit
dcc026217f ("UefiCpuPkg/CpuDxe: implement non-stop mode for uefi",
2018-08-30).
Another instance of the macro HEAP_GUARD_NONSTOP_MODE was added to
PiSmmCpuDxeSmm -- with BIT1|BIT0 replaced with BIT3|BIT2 -- in commit
09afd9a42a ("UefiCpuPkg/PiSmmCpuDxeSmm: implement non-stop mode for
SMM", 2018-08-30)
Since the freed-memory guard is for UEFI-only. This patch only updates
HEAP_GUARD_NONSTOP_MODE in "UefiCpuPkg/CpuDxe/CpuDxe.h" (add BIT4).
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
UAF (Use-After-Free) memory issue is kind of illegal access to memory
which has been freed. It can be detected by a new freed-memory guard
enforced onto freed memory.
BIT4 of following PCD is used to enable the freed-memory guard feature.
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPropertyMask
Please note this feature is for debug purpose and should not be enabled
in product BIOS, and cannot be enabled with pool/page heap guard at the
same time. It's disabled by default.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This cleanup is meant for avoiding misuse of newly introduced BIT4
(UAF detection) of PCD PcdHeapGuardPropertyMask, because it applies
to all types of physical memory. In another words,
PcdHeapGuardPoolType and PcdHeapGuardPageType don't have effect to
the BIT4 of PcdHeapGuardPropertyMask.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Pyrite 2.0 spec has been published, update the spec link info for this file.
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
The MacroDict parameter goes around in circles through 4 functions without use.
1. GetSectionData calls into GetLeafSection, otherwise doesn?t use MacroDict
2. GetLeafSection calls into GetFileStatement, otherwise doesn?t use MacroDict
3. GetFileStatement calls into GetFilePart, otherwise doesn?t use MacroDict
4. GetFilePart calls into GetSectionData, otherwise doesn?t use MacroDict
Go to 1 and repeat forever.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Change lists and tuples used solely for "in" testing to sets.
These operations are not order dependent.
fixed some line length for PEP8 compliance on some.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
1) remove wildcard imports and use explicit imports
2) refactor to use shared variables from Common/DataType
3) rename to not shadow imports
4) don't assign a variable in a loop (just do final assignment)
5) remove spaces, parens, unused or commented out code, etc.
6) merge unnecessary parent classes into child
7) refactor to share DXE and PEI apriori GUIDs from one place
this includes changes to Build and EOT files
8) for PEP8, dont use __ for custom methods.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob C Feng <bob.c.feng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1265
FSP should not override IDT table when it is initialized
by boot loader. IDT should be re-initialized in FSP only
when it is invalid.
To mitigate temporary memory usage a PCD
PcdFspMaxInterruptSupported created for platform to decide
how many interrupts the FSP IDT table can support.
Test: Verified on internal platform and boots successfully.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Desimone Nathaniel L <nathaniel.l.desimone@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
.nasm source file may include some header files.
header file should be listed in Makefile as .nasm source file
dependency.
But now, BaseTools doesn't find them and list them in Makefile.
This is a missing, because original ASM file supports it.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
original we get the VPD PCD items from the VPDGuid.map file in the FV
output folder. but this logic doesn't work when 1) there only have
single non Default SKU, 2) there have multiple SKU with same value.
Now we change it to get the really VPD Pcd items that already display
in the PCD section of the report.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V2: remove the not used parameter i
Fix the bug for Pcd used in command line not override the Pcd used
in the [component] driver's sub-section.
Case:
DSC file:
[PcdsFixedAtBuild]
TokenSpaceGuid.PcdTest
[Components]
TestPkg/TestDriver.inf {
<PcdsFixedAtBuild>
TokenSpaceGuid.PcdTest|"b"
}
build command with --pcd TokenSpaceGuid.PcdTest="AAAABB"
Then we found the Pcd value in the AutoGen.c file is incorrect,
because of the incorrect logic that use the pcd in the [component]
section to re-override it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1260
For the PassThru() service of NVM Express Pass Through Protocol, the
current implementation (function NvmExpressPassThru()) will only use the
IO Completion/Submission queues created internally by this driver during
the controller initialization process. Any other IO queues created will
not be consumed.
So the value is little to accept external IO Completion/Submission queue
creation request. This commit will refine the behavior of function
NvmExpressPassThru(), it will only accept driver internal IO queue
creation commands and will return "EFI_UNSUPPORTED" for external ones.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1259
According to the the NVM Express spec Revision 1.1, for some commands,
command-related information will be stored in the Dword 0 of the
completion queue entry.
One case is for the Get Features Command (Section 5.9.2 of the spec),
Dword 0 of the completion queue entry may contain feature information.
Hence, this commit will always copy the content of completion queue entry
to the PassThru packet regardless of the execution result of the command.
Cc: Liangcheng Tang <liangcheng.tang@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1142
According to the the NVM Express spec Revision 1.1, for some commands
(like Get/Set Feature Command, Figure 89 & 90 of the spec), the Memory
Buffer maybe optional although the command opcode indicates there is a
data transfer between host & controller (Get/Set Feature Command, Figure
38 of the spec).
Hence, this commit refine the checks for the 'TransferLength' and
'TransferBuffer' field of the EFI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET
structure to address this issue.
Cc: Liangcheng Tang <liangcheng.tang@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1272
To have high confidence in usage for platform, add option (BIT2 of
PcdVTdPolicyPropertyMask) to force no IOMMU access attribute request
recording before DMAR table is installed.
Check PcdVTdPolicyPropertyMask BIT2 before RequestAccessAttribute()
and ProcessRequestedAccessAttribute(), then RequestAccessAttribute(),
ProcessRequestedAccessAttribute() and mAccessRequestXXX variables
could be optimized by compiler when PcdVTdPolicyPropertyMask BIT2 = 1.
Test done:
1: Created case that has IOMMU access attribute request before DMAR
table is installed, ASSERT was triggered after setting
PcdVTdPolicyPropertyMask BIT2 to 1.
2. Confirmed RequestAccessAttribute(), ProcessRequestedAccessAttribute()
and mAccessRequestXXX variables were optimized by compiler after
setting PcdVTdPolicyPropertyMask BIT2 to 1.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
PcdValueInit tool is platform scope.
It should be generated into Platform output directory.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob C Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The current code handle all the structure pcds
even if there is no module or library use them.
This patch is going to filter out the unused structure pcds.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PcdValueInit tool is Arch independent, the Arch specific
build options should be removed from PcdValueInit makefile.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob C Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
For void* type pcd in command line, if its value is string, code should
not convert the void* pcd string in command line to array, otherwise it
will make the pcd value in report not match its real raw value.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
For structure PCD in fdf file and command line,
1. use compiler time assert to check the array index, report error
if array index exceeds the array number.
2. use compiler time assert to check the array size, report error
if the user declared size in header file is smaller than the user
used in fdf file and command line.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1243
AcpiExp text device path: AcpiExp(HID,CID,UIDSTR)
And according to UEFI spec, the CID parameter is optional
and has a default value of 0. But current implementation
miss to check following cases for the AcpiExp.
FromText:when text device is AcpiExp(HID,,UIDSTR)/AcpiExp(HID,0,UIDSTR)
ToText: when the CID is 0 in the node structure
This commit is to do the enhancement.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1243
According to UEFI spec,
for the Messaging Device Path with USB Class SubType, some paras
are optional in the text device path.
Take UsbClass(VID,PID,Class,SubClass,Protocol) for example,
The VID is an integer between 0 and 65535 and is optional. The
default value is 0xFFFF.
The PID is an integer between 0 and 65535 and is optional. The
default value is 0xFFFF.
The Class is an integer between 0 and 255 and is optional. The
default value is 0xFF.
The SubClass is an integer between 0 and 255 and is optional. The
default value is 0xFF.
The Protocol is an integer between 0 and 255 and is optional. The
default value is 0xFF.
So if any the optional para is not specified in the text device,
we should set related para in the node structure to default value.
This commit is to do the enhancement for USB Class device path
when optional para is not specified
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Replace multiple, consecutive "\" characters prior to other processing
involving "\" characters. This fixes an issue where "\\..\\..",
"//..//..", and similar input paths are not cleaned properly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@Intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This is a fix for a double cluster allocation when the disk is full.
The double allocation happens because FatGrowEof calls
FatAllocateCluster without immediately marking the each returned
cluster as allocated. The fix is to move the FatSetFatEntry call
inside the loop.
I've also include some improvements to the sanity checks that I added
while tracking this down. They are optional.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Herbie Robinson <Herbie.Robinson@stratus.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1236
When "dmem" runs without additional arguments, it dumps the memory
content of EFI_SYSTEM_TABLE. But today's implementation dumps 512
bytes. It's not correct because sizeof (EFI_SYSTEM_TABLE) is less
than 512, the 512-read causes page fault exception in a heap-guard
enabled environment.
The patch changes the implementation to only dump
sizeof (EFI_SYSTEM_TABLE) bytes for gST.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jim Dailey <jim_dailey@.com>
Commit e59db6a732
* MdeModulePkg/UsbMass: Merge UsbBoot(Read|Write)Blocks(16)
introduces a bug that causes writing to USB key always fails.
When that patch is verified, only reading was verified.
The root cause is when the writing operation is performed,
the data direction EfiUsbDataIn is wrongly used. Instead, it
should be EfiUsbDataOut.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The tool now can detect the error that the content between double
quotes contains another double quotes or enter key.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Change the criteria of the checkpoint of "#ifndef" to remove the requirement of prefix '_'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1255
For function ReadFile():
If the line
Status = GetAedAdsData (
...
);
is reached multiple times during the 'for' loop, freeing the data pointed
by variable 'Data' may potentially lead to variable 'Ad' referencing the
already-freed data.
After calling function GetAllocationDescriptor(), 'Data' and 'Ad' may
point to the same memory (with some possible offset). Hence, this commit
will move the FreePool() call backwards to ensure the data will no longer
be used.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Acked-by: Star Zeng <star.zeng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1254
This commit will add an additional check within function GetPdFromLongAd()
when getting a Partition Descriptor from given a Long Allocation
Descriptor.
According to UDF 2.60 Spec, Section 2.2.13:
> The partition reference numbers used are determined by the order of the
> Partition Maps in the LVD.
(Also the picture comes before the above contents)
And a more detailed explanation of the partition reference numbers is at
https://sites.google.com/site/udfintro/ (seems not a formal documentation
though), Section 5.3.6.
Based on the above findings, the 'PartitionReferenceNumber' field in a
Long Allocation Descriptor is used as an index to access the Partition
Maps data within a Logical Volume Descriptor.
Hence, the new check focuses on the validity of this
'PartitionReferenceNumber' field in a Long Allocation Descriptor. Since
the current implementation of UdfDxe driver supports only one partition on
a Logical Volume, so the value of 'PartitionReferenceNumber' should be 0.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Acked-by: Star Zeng <star.zeng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1252
Calling the 'SetPosition' service of the EFI_FILE_PROTOCOL with 'Position'
equals to 0xFFFFFFFFFFFFFFFF for a file is to set the current position to
the end of the file. But the current implementation of function
UdfSetPosition() is to set it to the last byte (not EOF).
This commit will resolve this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Acked-by: Star Zeng <star.zeng@intel.com>
Current hard code Usb2Hc.XXXRevision may be not accurate.
This patch updates code to assign Usb2Hc.XXXRevision based on
SBRN (Serial Bus Release Number, PCI configuration space offset
0x60) although there is no code consuming them.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Because of we newly add the PcdFieldValueFromComm and
PcdFieldValueFromFdf in early parser phase, so in the report we use
the saved value in this two variables to print it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1262
Current implementation of BaseLib APIs:
AsciiStrToUnicodeStr()
AsciiStrToUnicodeStrS()
AsciiStrnToUnicodeStrS()
do not handle EASCII properly.
More specifically, if the value of ASCII character is larger than 0x7F,
then the converted Unicode character will have all '1's in the higher 8
bits.
An example:
0xC9 => 0xFFC9 (current implementations)
and it should be:
0xC9 => 0x00C9
This commit will address this issue.
Cc: Bin.Lain <bin_601@mail2000.com.tw>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V2:
Fixed 3 typo.
Use startswith(('L"',"L'")) to check if a string is Unicode string.
Use a set PcdValueTypeSet instead of a list PcdValueTypeList to save
memory.
V1:
For the same one VOID* pcd, if the default value type of one SKU is
"Unicode string", the other SKUs are "OtherVOID*"(ASCII string or
byte array),Then convert "Unicode string" to "byte array".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
V2:
Make the code of patch both compatible for Python2 and Python3.
V1:
If different PCDs refer to the same EFI variable, then do EFI variable
combination, according to the VariableOffset of different PCDS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Because MSR has scope attribute, driver has no needs to set
MSR for all APs if MSR scope is core or package type. This patch
updates code to base on the MSR scope value to add MSR to the register
table.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
V4 changes:
1. Serial console log for different threads when program register table.
2. Check the AcpiCpuData before use it to avoid potential ASSERT.
V3 changes:
1. Use global variable instead of internal function to return string for register type
and dependence type.
2. Add comments for some complicated logic.
V1 changes:
Because this driver needs to set MSRs saved in normal boot phase, sync
semaphore logic from RegisterCpuFeaturesLib code which used for normal boot phase.
Detail see below change for RegisterCpuFeaturesLib:
UefiCpuPkg/RegisterCpuFeaturesLib: Add logic to support semaphore type.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
V4 changes include:
1. Serial debug message for different threads when program the register table.
V3 changes include:
1. Use global variable instead of internal function to return string for register type
and dependence type.
2. Add comments for some complicated logic.
V2 changes include:
1. Add more description for the code part which need easy to understand.
2. Refine some code base on feedback for V1 changes.
V1 changes include:
In a system which has multiple cores, current set register value task costs huge times.
After investigation, current set MSR task costs most of the times. Current logic uses
SpinLock to let set MSR task as an single thread task for all cores. Because MSR has
scope attribute which may cause GP fault if multiple APs set MSR at the same time,
current logic use an easiest solution (use SpinLock) to avoid this issue, but it will
cost huge times.
In order to fix this performance issue, new solution will set MSRs base on their scope
attribute. After this, the SpinLock will not needed. Without SpinLock, new issue raised
which is caused by MSR dependence. For example, MSR A depends on MSR B which means MSR A
must been set after MSR B has been set. Also MSR B is package scope level and MSR A is
thread scope level. If system has multiple threads, Thread 1 needs to set the thread level
MSRs and thread 2 needs to set thread and package level MSRs. Set MSRs task for thread 1
and thread 2 like below:
Thread 1 Thread 2
MSR B N Y
MSR A Y Y
If driver don't control execute MSR order, for thread 1, it will execute MSR A first, but
at this time, MSR B not been executed yet by thread 2. system may trig exception at this
time.
In order to fix the above issue, driver introduces semaphore logic to control the MSR
execute sequence. For the above case, a semaphore will be add between MSR A and B for
all threads. Semaphore has scope info for it. The possible scope value is core or package.
For each thread, when it meets a semaphore during it set registers, it will 1) release
semaphore (+1) for each threads in this core or package(based on the scope info for this
semaphore) 2) acquire semaphore (-1) for all the threads in this core or package(based
on the scope info for this semaphore). With these two steps, driver can control MSR
sequence. Sample code logic like below:
//
// First increase semaphore count by 1 for processors in this package.
//
for (ProcessorIndex = 0; ProcessorIndex < PackageThreadsCount ; ProcessorIndex ++) {
LibReleaseSemaphore ((UINT32 *) &SemaphorePtr[PackageOffset + ProcessorIndex]);
}
//
// Second, check whether the count has reach the check number.
//
for (ProcessorIndex = 0; ProcessorIndex < ValidApCount; ProcessorIndex ++) {
LibWaitForSemaphore (&SemaphorePtr[ApOffset]);
}
Platform Requirement:
1. This change requires register MSR setting base on MSR scope info. If still register MSR
for all threads, exception may raised.
Known limitation:
1. Current CpuFeatures driver supports DXE instance and PEI instance. But semaphore logic
requires Aps execute in async mode which is not supported by PEI driver. So CpuFeature
PEI instance not works after this change. We plan to support async mode for PEI in phase
2 for this task.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
v3 changes:
1. Move CPU_FEATURE_DEPENDENCE_TYPE definition here from RegisterCpuFeaturesLib.h file.
2. Add Invalid type for REGISTER_TYPE which will be used in code.
v2 changes:
1. Add more description about why we do this change.
2. Change structure field type from pointer to EFI_PHYSICAL_ADDRESS because it will
be share between PEI and DXE.
v1 Changes:
In order to support semaphore related logic, add new definition for it.
In a system which has multiple cores, current set register value task costs huge times.
After investigation, current set MSR task costs most of the times. Current logic uses
SpinLock to let set MSR task as an single thread task for all cores. Because MSR has
scope attribute which may cause GP fault if multiple APs set MSR at the same time,
current logic use an easiest solution (use SpinLock) to avoid this issue, but it will
cost huge times.
In order to fix this performance issue, new solution will set MSRs base on their scope
attribute. After this, the SpinLock will not needed. Without SpinLock, new issue raised
which is caused by MSR dependence. For example, MSR A depends on MSR B which means MSR A
must been set after MSR B has been set. Also MSR B is package scope level and MSR A is
thread scope level. If system has multiple threads, Thread 1 needs to set the thread level
MSRs and thread 2 needs to set thread and package level MSRs. Set MSRs task for thread 1
and thread 2 like below:
Thread 1 Thread 2
MSR B N Y
MSR A Y Y
If driver don't control execute MSR order, for thread 1, it will execute MSR A first, but
at this time, MSR B not been executed yet by thread 2. system may trig exception at this
time.
In order to fix the above issue, driver introduces semaphore logic to control the MSR
execute sequence. For the above case, a semaphore will be add between MSR A and B for
all threads. Semaphore has scope info for it. The possible scope value is core or package.
For each thread, when it meets a semaphore during it set registers, it will 1) release
semaphore (+1) for each threads in this core or package(based on the scope info for this
semaphore) 2) acquire semaphore (-1) for all the threads in this core or package(based
on the scope info for this semaphore). With these two steps, driver can control MSR
sequence. Sample code logic like below:
//
// First increase semaphore count by 1 for processors in this package.
//
for (ProcessorIndex = 0; ProcessorIndex < PackageThreadsCount ; ProcessorIndex ++) {
LibReleaseSemaphore ((UINT32 *) &SemaphorePtr[PackageOffset + ProcessorIndex]);
}
//
// Second, check whether the count has reach the check number.
//
for (ProcessorIndex = 0; ProcessorIndex < ValidApCount; ProcessorIndex ++) {
LibWaitForSemaphore (&SemaphorePtr[ApOffset]);
}
Platform Requirement:
1. This change requires register MSR setting base on MSR scope info. If still register MSR
for all threads, exception may raised.
Known limitation:
1. Current CpuFeatures driver supports DXE instance and PEI instance. But semaphore logic
requires Aps execute in async mode which is not supported by PEI driver. So CpuFeature
PEI instance not works after this change. We plan to support async mode for PEI in phase
2 for this task.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1251
*v2: Correct the type of parameters in Ikev2ParseProposalData(), and refined
the corresponding description.
IpSecDxe failed to create the Child SA during parsing SA Payload, the issue
was caused by the below commit:
SHA-1: 1e0db7b119
* MdeModulePkg/NetworkPkg: Checking for NULL pointer before use.
In above commit, it changed the value of IsMatch in Ikev2ChildSaParseSaPayload()
to FALSE. That's correct but it exposed the potential bug in to match the correct
proposal Data, which will cause the issue happen.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The case is:
in the DSC file:
SKUID_IDENTIFIER = ALL
[SkuIds]
0|DEFAULT
1|A
[PcdsFixedAtBuild.common.A]
TokenSpaceGuid.Test401|{0x0F, 0x12}
TokenSpaceGuid.Test401.TEST401INT8ARRAY[0]|'B'
in the build report, Data = OverrideValues[Keys[0]], but the Keys[0]
is the keyword "DEFAULT", and in this case the "DEFAULT" SKU doesn't
save any value, then it cause the Data is empty, in the next code
when we use the code it cause crash.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The case is use Dynamic structure Pcd in the FDF file.
Current code already save the Guid, Name and Filed info for those Pcd,
but it directly use the dict key as [Name, Guid] and cause this crash
issue.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=1264
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
the bug is PcdValueFromComm is not set, but the Pcd have been override
by the command line option.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1266af5e952159 abstracted generic functions
from different modules (IntelVTdDxe, S3SaveStateDxe, PcRtc,
DpDynamicCommand and PiSmmCpuDxeSmm). Some of them (IntelVTdDxe and
PcRtc) checked Table against NULL before accessing Table->Signature,
some (S3SaveStateDxe, DpDynamicCommand and PiSmmCpuDxeSmm did not.
The ScanTableInSDT() in Acpi.c of UefiLib was mainly from
S3SaveStateDxe, so it does not check Table against NULL before
accessing Table->Signature.
This patch updates ScanTableInSDT() to check Table against NULL first
before accessing Table->Signature.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1241
Add support for both API (original mode) and DISPATCH mode:
1. Add FspMode field from reserved byte of Global
Data Structure to tell which mode is selected by boot
loader. If boot loader invoking FSP-M API this field
will remain as default 0 (API mode), otherwise platform
FSP should set this field to 1 (Dispatch mode) when
initializing Global Data Structure.
2. gFspInApiModePpiGuid will be instaled when FSP running in API
mode and modules only for API mode should have this in depex.
3. If it is DISPATCH mode, FSP will return to PEI dispatcher,
not directly return to boot loader.
4. DISPATCH mode supports DXE NotifyPhase drivers so FSP
will not wait for PEI NotifyPhase callbacks, instead it
will install gFspReadyForNotifyPhasePpiGuid PPI for
platform to complete late initialization before transferring
to DXE.
Test: Verified FSP API and DISPATCH modes on 2 internal
platforms and both boot successfully.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Desimone Nathaniel L <nathaniel.l.desimone@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
This change is to pass static analysis.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In the expression for unicode string and general string compare, it
should check whether it startswith "L'" or 'L"', but not "L".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
the case is:
in the DSC:
[PcdsFixedAtBuild.common]
TokenSpaceGuid.TestFixedPcd|0xFFEAA000
[PcdsDynamicExDefault.common.DEFAULT]
!if TokenSpaceGuid.PcdFlag == TRUE
TokenSpaceGuid.PcdTest|TokenSpaceGuid.TestFixedPcd
!endif
Then build with --pcd TokenSpaceGuid.PcdFlag=TRUE, it report failure,
but if we build without this --pcd option, it could build success.
we found when the --pcd is enabled, the fixedatbuild pcds are not be
collected into expression to calculate.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=1256
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1249
We found potential dead codes within File.c during the code coverage test.
After manual review, we think the below ones are positive reports:
A. For function GetAllocationDescriptor():
Due to the all the calling places for this function, the input parameter
'RecordingFlags' can only with value 'LongAdsSequence' or
'ShortAdsSequence'. Moreover, this is also mentioned in the function
description comments for GetAllocationDescriptor().
So the below code will never be reached:
return EFI_DEVICE_ERROR;
This commit will add "ASSERT (FALSE);" before the above line to indicate
this and thus matching the function description comments.
B. For function GetAllocationDescriptorLsn():
Due to the all the calling places for this function, the input parameter
'RecordingFlags' can only with value 'LongAdsSequence' or
'ShortAdsSequence'. Moreover, this is also mentioned in the function
description comments for GetAllocationDescriptorLsn().
So the below code will never be reached:
return EFI_UNSUPPORTED;
This commit will add "ASSERT (FALSE);" before the above line to indicate
this and thus matching the function description comments.
Cc: Paulo Alcantara <palcantara@suse.de>
Cc: Paulo Alcantara <paulo@paulo.ac>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1249
We found potential dead codes within File.c during the code coverage test.
After manual review, we think the below ones are positive reports:
A. In function UdfRead():
else if (IS_FID_DELETED_FILE (Parent->FileIdentifierDesc)) {
Status = EFI_DEVICE_ERROR;
}
A File Identifier Descriptor will be get from the UDF media only by
function ReadDirectoryEntry(). And within this function, all the File
Identifier Descriptor with 'DELETED_FILE' characteristics will be skipped
and will not be returned. Hence, the above codes in function UdfRead()
will never be hit.
This commit will add "ASSERT (FALSE);" before the above line to indicate
this.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1248
This commit will refine the ASSERTs in function GetLongAdLsn() and
GetAllocationDescriptorLsn() when the logical sector number cannot be
returned due to unrecognized media format.
Error handling logic will be used for those ASSERTs.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This commit adds ASSERTs to address false positive reports of NULL
pointer dereference issues raised from static analysis with regard to
function ReadDirectoryEntry().
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Star Zeng <star.zeng@intel.com>
(This patch is identical to the X64 half of the last one, except for the
InternalSyncCompareExchange32() -> InternalSyncCompareExchange64() and
"cmpxchgl" -> "cmpxchgq" replacements.)
The CMPXCHG instruction has the following operands:
- AX (implicit, CompareValue): input and output
- destination operand (*Value): input and output
- source operand (ExchangeValue): input
The X64 version of InternalSyncCompareExchange64() attempts to mark both
CompareValue and (*Value) as input/output, but it doesn't use the
appropriate constraints for either operand.
Fix these issues. Furthermore, prefer the short "+" constraint for I/O
operands over the <output-operand-number> constraint that can be applied
to the input instances of I/O operands.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1208
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(This patch is identical to the last one, except for the
InternalSyncCompareExchange16() -> InternalSyncCompareExchange32() and
"cmpxchgw" -> "cmpxchgl" replacements.)
The CMPXCHG instruction has the following operands:
- AX (implicit, CompareValue): input and output
- destination operand (*Value): input and output
- source operand (ExchangeValue): input
The IA32 version of InternalSyncCompareExchange32() correctly marks
CompareValue as input/output, but it marks (*Value) only as input.
The X64 version of InternalSyncCompareExchange32() attempts to mark both
CompareValue and (*Value) as input/output, but it doesn't use the
appropriate constraints for either operand.
Fix these issues. Furthermore, prefer the short "+" constraint for I/O
operands over the <output-operand-number> constraint that can be applied
to the input instances of I/O operands.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1208
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The CMPXCHG instruction has the following operands:
- AX (implicit, CompareValue): input and output
- destination operand (*Value): input and output
- source operand (ExchangeValue): input
The IA32 version of InternalSyncCompareExchange16() correctly marks
CompareValue as input/output, but it marks (*Value) only as input.
The X64 version of InternalSyncCompareExchange16() attempts to mark both
CompareValue and (*Value) as input/output, but it doesn't use the
appropriate constraints for either operand.
Fix these issues. Furthermore, prefer the short "+" constraint for I/O
operands over the <output-operand-number> constraint that can be applied
to the input instances of I/O operands.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1208
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=415
When SetVariable() to a time based auth variable with APPEND_WRITE
attribute, and if the EFI_VARIABLE_AUTHENTICATION_2.TimeStamp in
the input Data is earlier than current value, it will cause timestamp
zeroing.
This issue may bring time based auth variable downgrade problem.
For example:
A vendor released three certs at 2014, 2015, and 2016, and system
integrated the 2016 cert. User can SetVariable() with 2015 cert and
APPEND_WRITE attribute to cause timestamp zeroing first, then
SetVariable() with 2014 cert to downgrade the cert.
This patch fixes this issue.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Per USB HID spec, the buffer holding key codes should at least 3-byte
long.
Today's code assumes that the key codes buffer length is longer than
3-byte and unconditionally accesses the key codes buffer.
It's incorrect.
The patch fixes the issue by returning Device Error when the
length is less than 3-byte.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Per USB HID spec, the buffer holding key codes should at least 3-byte
long.
Today's code assumes that the key codes buffer length is longer than
3-byte and unconditionally accesses the key codes buffer.
It's incorrect.
The patch fixes the issue by returning Device Error when the
length is less than 3-byte.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Per USB HID spec, the buffer holding key codes should be 8-byte
long.
Today's code assumes that the key codes buffer length is 8-byte
long and unconditionally accesses the key codes buffer.
It's incorrect.
The patch fixes the issue by returning Device Error when the
length is less than 8-byte.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Today's implementation doesn't check whether the length of
descriptor is valid before using it.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Today's implementation reads the Type/Length field in the USB
descriptors data without checking whether the offset to read is
beyond the data boundary.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
UsbBootReadWriteBlocks() and UsbBootReadWriteBlocks16() use a UINT16
local variable to hold the value of
USB_BOOT_MAX_CARRY_SIZE (=0x10000) / BlockSize.
When BlockSize is 1, the UINT16 local variable is set to 0x10000
but the high-16 bits are truncated resulting the final value be 0.
It causes the while-loop in the two functions accesses 0 block in
each loop, resulting the loop never ends.
The patch fixes the two functions to make sure no integer overflow
happens.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The change doesn't have functionality impact.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Update the EOT tool to call the program itself instead of calling the Python API when parsing FV images.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Acked-by: Jaben Carsey <jaben.carsey@intel.com>
Original it hard code to use "VOID*", this patch extend it to both
support VOID* and valid struct name.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Relational and equality operators require both operands to be of
the same type.
Treat the string 'A' and "A" as same type, but for "A" and L"A"
are not same type since one is general string, another is unicode
string.
True:'A'<'B', "A"<"B" 'A'<"B", L'A'<L'B', L"A"<L"B", L'A'<L"B"
Error:'A'<L'B', 'A'<L"B", "A'<L'B'
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
For void* type pcd in command line, if its value is string, then
convert the string value to array format. For example,
build --pcd gUefiOvmfPkgTokenSpaceGuid.PcdTest="c",
convert the pcd value from "c" to "{0x63,0x00}".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V3:
Update the error message for array checker.
V2:
1. Add comments for each ASSERT.
2. ASSERT need to skip the case of array size of array as zero. For
example, TestArray[] in struct in header file.
V1:
For structure PCD,
1. use compiler time assert to check the array index, report error
if array index exceeds the array number.
2. use compiler time assert to check the array size, report error
if the user declared size in header file is smaller than the user
defined in DEC/DSC file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BrotliCustomDecompressLib has the definition with float type. But,
Floating-point types are not supported by EBC compiler.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Bi Dandan <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Set macro for variable arguments, and remove the hard code definition
to avoid the potential duplicated definition.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Dongao Guo <dongao.guo@intel.com>
There are five check not necessary in logic ,just for pass static
analysis. More detail please refer to comment in code.
And the rest changes are all accepted by owner, they are reasonable.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dongao Guo <dongao.guo@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add one new option --uefi to enable UefiCompress.
(re-add this patch since it be reverted in Python3 migration patches,
but this patch is not related with Python3)
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Cover the case:
1.only define the structure Pcd in DEC file, it should not have any
Flag.
2.In the DEC file and DSC file only have the PCD's default value, and
without the field value, it should have *P Flag.
(re-add this patch since it be reverted in Python3 migration patches,
but this patch is not related with Python3)
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
the PyUtility is not used, so we remove it.
(re-add this patch since it be reverted in Python3 migration patches,
but this check is not related with Python3)
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V5:
1. Add ASSERT to indicate this assumption that environment is 32 bit mode.
2. Add description in INF about this driver's expected result
in different environment.
V4:
Only disable paging when it is enabled.
V3 changes:
No need to change inf file.
V2 changes:
Only disable paging in 32 bit mode, no matter it is enable or not.
V1 changes:
PEI Stack Guard needs to enable paging. This might cause #GP if code
trying to write CR3 register with PML4 page table while the processor
is enabled with PAE paging.
Simply disabling paging before updating CR3 can solve this conflict.
It's an regression caused by change: 0a0d5296e4
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1232
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
This reverts commit 6693f359b3c213513c5096a06c6f67244a44dc52..
678f851312.
Python3 migration is the fundamental change. It requires every developer
to install Python3. Before this migration, the well communication and wide
verification must be done. But now, most people is not aware of this change,
and not try it. So, Python3 migration is reverted and be moved to edk2-staging
Python3 branch for the edk2 user evaluation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
For structure Pcd, the type defined in the DEC file is the struct name
while if this Pcd used in the DSC file, it should add VOID* keywords
when it have max size info. so this patch filter the type compare for
this case.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cover the case:
1.only define the structure Pcd in DEC file, it should not have any
Flag.
2.In the DEC file and DSC file only have the PCD's default value, and
without the field value, it should have *P Flag.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. Add Python 3 support on ECC and EOT tools
2. Add C grammar file of ANTLR4 and fix some bugs
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. increment build not skip make file when not change any file
2. report file generate abundant blank line
3. Build encounter Database is locked on some platform, using database
auto commit
4. Fv BaseAddress must have if set
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PEP 238 -- Changing the Division Operator
x/y to return a reasonable approximation of the mathematical result
of the division ("true division")
x//y to return the floor ("floor division")
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Updated Redistributor base calculation to allow for the fact that
GICv4 has 2 additional 64KB frames (for VLPI and a reserved frame).
The code now tests the VLPIS bit in the GIC Redistributor Type
Register (GICR_TYPER) and calculates the Redistributor granularity
accordingly.
The code changes are:
GICR_TYPER register fields, etc, added to the header.
Loop updated to pay attention to GICR_TYPER.Last.
Derive frame "stride" size from GICR_TYPER.VLPIS.
Note: The assumption is that the redistributors are adjacent for
all CPUs. However this may not be the case for NUMA systems.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Clock control is similar in SDHCI versions greater then version 2. Add
support for more recent versions of the controller specification.
SD card support for 1.8V is also present in controller versions 3 and
greater.
https://bugzilla.tianocore.org/show_bug.cgi?id=1233
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Add SDHCI controller defines, this is useful as the version in the
register does not explictly map to a specification version. For example
vesion 4.10 of the specification is version 0x04.
https://bugzilla.tianocore.org/show_bug.cgi?id=1233
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1229
When converting DebugPort device path from text,
current code use VENDOR_DEFINED_MESSAGING_DEVICE_PATH structure
for Debug port device node.
typedef struct {
EFI_DEVICE_PATH_PROTOCOL Header;
EFI_GUID Guid;
UINT8 VendorDefinedData[1];
} VENDOR_DEFINED_MESSAGING_DEVICE_PATH;
And Debugport Device Path is a vendor-defined messaging
device path with no data, only a GUID. So it's better to
use VENDOR_DEVICE_PATH to create the Debug port device node.
typedef struct {
EFI_DEVICE_PATH_PROTOCOL Header;
EFI_GUID Guid;
} VENDOR_DEVICE_PATH;
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
ShellPkg-Cd: Ensure all valid cd targets are handled properly
Make sure that PathCleanUpDirectories() is called on all valid targets
of the cd command.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
MdePkg-BaseLib: Fix PathCleanUpDirectories() error involving "\..\.."
The loop that removes "xxxx\..\" errs when multiple "\.." sequences are
in the path. Before this change the code would modify a path like
"FS0:\efi\tools\..\.." to "FS0:\efi\\.." and then to "FS0:\efi\", but
the correct path is "FS0:\".
You can test the effect of this change in the shell by setting the
current directory to something like FS0:\efi\boot and then executing
the command "ls ..\..". Before the change you will see the files in
the FS0:\efi directory; after the change, you will see the files in
the root directory of FS0:.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
There are three warnings reported by GCC 4.8 and the later GCC release
are workaround with them.
And all the three warnings are invalid,so I just disable warnings rather
than fix them at now.
Following is the analysis from Laszlo Ersek.
(1)
> MdeModulePkg/Universal/RegularExpressionDxe/Oniguruma/regcomp.c: In
> function 'compile_length_tree':
> MdeModulePkg/Universal/RegularExpressionDxe/Oniguruma/regcomp.c:1516:7:
> warning: 'len' may be used uninitialized in this function
> [-Wmaybe-uninitialized]
> int len;
> ^
I think this is an invalid warning; the type of the controlling expression
(node->type) is enum GimmickType, and the case labels cover all values of
the enum. An assert(0) could be added, I guess, but again, upstream
Oniguruma would be justified to reject the idea.
(2)
> MdeModulePkg/Universal/RegularExpressionDxe/Oniguruma/regparse.c: In
> function 'parse_callout_args.isra.10.constprop.30':
> MdeModulePkg/Universal/RegularExpressionDxe/Oniguruma/regparse.c:6753:25:
> warning: 'rl' may be used uninitialized in this function
> [-Wmaybe-uninitialized]
> vals[n].l = rl;
> ^
This warning is invalid, given:
6749 if (cn > 0) {
6750 long rl;
6751 r = parse_long(enc, buf, bufend, 1, LONG_MAX, &rl);
6752 if (r == ONIG_NORMAL) {
6753 vals[n].l = rl;
Because parse_long() only returns ONIG_NORMAL after it sets (*rl).
(3)
> MdeModulePkg/Universal/RegularExpressionDxe/Oniguruma/regparse.c: In
> function 'parse_callout_of_name.constprop.29':
> MdeModulePkg/Universal/RegularExpressionDxe/Oniguruma/regparse.c:6861:38:
> warning: 'tag_end' may be used uninitialized in this function
> [-Wmaybe-uninitialized]
> if (! is_allowed_callout_tag_name(enc, tag_start, tag_end))
This warning is also invalid, given:
6852 if (c == '[') {
6853 if (PEND) return ONIGERR_END_PATTERN_IN_GROUP;
6854 tag_start = p;
6855 while (! PEND) {
6856 if (PEND) return ONIGERR_END_PATTERN_IN_GROUP;
6857 tag_end = p;
6858 PFETCH_S(c);
6859 if (c == ']') break;
6860 }
6861 if (! is_allowed_callout_tag_name(enc, tag_start, tag_end))
6862 return ONIGERR_INVALID_CALLOUT_TAG_NAME;
6863
To see that, first we should note:
#define PEND (p < end ? 0 : 1)
therefore PEND doesn't change if neither "p" nor "end" change.
Second, when we reach line 6855 (the "while") for the very first time,
(!PEND) is certainly true (i.e., PEND is false), because otherwise we
would have bailed at line 6853. Therefore we reach line 6857, and assign
"tag_end". Regardless of whether we iterate zero or more *additional*
times around the loop, "tag_end" will have been set, whenever we reach
line 6861.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dongao Guo <dongao.guo@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Currently, the implementation of EFI_PCI_IO_PROTOCOL::GetLocation()
in NonDiscoverablePciDeviceDxe returns the same set of dummy values
for each instance of the NON_DISCOVERABLE_DEVICE protocol that it
attaches itself to. However, this turns out to be causing problems
in cases where software (such as the ARM Compliance Test Suite [ACS])
attempts to use these values to uniquely identify controllers, since
the collisions create ambiguity in this regard.
So let's modify GetLocation() to return an arbitrary bus/device tuple
on segment 0xff instead. This is guaranteed not to clash with other
non-discoverable PCI devices, and highly unlikely to clash with real
PCIe devices.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1228
According to UEFI spec,for ACPI Expanded Device Path
when HID=PNP0A03 or CID=PNP0A03 and HID != PNP0A08,
the device path node can be displayed as: PciRoot(UID|UIDSTR)
When HID=PNP0A08 or CID=PNP0A08, the device path node can be
displayed as: PcieRoot(UID|UIDSTR). But current code miss the
code logic.
This commit is to do the enhancement.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1226
According to UEFI Spec, for ACPI Expanded Device Path,
when HIDSTR=empty, CIDSTR=empty, UID STR!=empty,
the ACPI Expanded Device Path node can be displayed as
AcpiExp(HID,CID,UIDSTR) format.
And if UID is 0 and UIDSTR is empty, then use AcpiEx format.
This patch is to correct the condition check to follow UEFI
Spec when convert the device path node to the AcpiExp text
format.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1224
When covert IFR binary to EFI_IFR_CHECKBOX structure,
Current code has following incorrect code logic:
IfrCheckBox = (EFI_IFR_CHECKBOX *) (IfrOpHdr + 1);
The correct one should be:
IfrCheckBox = (EFI_IFR_CHECKBOX *) IfrOpHdr;
1. The bug is in function "UpdateDefaultSettingInFormPackage()"
which is to update the default setting of some HII Questions
in the IFR binary data. So it only has impact when platform
overrides default setting in HII VarStore through DynamicHii
PCD setting in Platform DSC file. If platform doesn't
override default setting, it has no impact.
2. The implementation updates the "Flags" filed in the
EFI_IFR_CHECKBOX structure to update the default
setting of checkbox.
If using "IfrCheckBox = (EFI_IFR_CHECKBOX *) (IfrOpHdr + 1);"
when wants to update the " Flags" filed in checkbox,
but in fact it will update the opcode binary
data(opcode binary length) behind checkbox binary.
And then it will cause Browser can't parse the IFR
binary data correctly. And then the possible symptom
is that some HII Question and forms may be not parsed
and then cannot be shown.
This patch is to fix this bug.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This is for conformance with the TCG "Platform Reset Attack Mitigation
Specification". Because clearing the CPU caches at boot doesn't impact
performance significantly, do it unconditionally, for simplicity's
sake.
Flush the cache on all logical processors, thanks to
EFI_PEI_MP_SERVICES_PPI and CacheMaintenanceLib.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
[lersek@redhat.com: remove bogus Message-Id line from commit msg]
Create a homefilesystem environment variable whose value is the file
system on which the executing shell is located. For example: "FS14:".
This eliminates the need for people to have to try and find the "boot"
file system in their startup script. After this change they can simply
execute %homefilesystem% to set the cwd to the root of the file system
where the shell is located.
A future enhancement could be to add "homefilesystem" to the list of
predefined, read-only variables listed in the EfiShellSetEnv function of
file ShellProtocol.c
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1194
Speculative execution is used by processor to avoid having to wait for
data to arrive from memory, or for previous operations to finish, the
processor may speculate as to what will be executed.
If the speculation is incorrect, the speculatively executed instructions
might leave hints such as which memory locations have been brought into
cache. Malicious actors can use the bounds check bypass method (code
gadgets with controlled external inputs) to infer data values that have
been used in speculative operations to reveal secrets which should not
otherwise be accessed.
It is possible for SMI handler(s) to call EFI_SMM_CPU_PROTOCOL service
ReadSaveState() and use the content in the 'CommBuffer' (controlled
external inputs) as the 'CpuIndex'. So this commit will insert AsmLfence
API to mitigate the bounds check bypass issue within SmmReadSaveState().
For SmmReadSaveState():
The 'CpuIndex' will be passed into function ReadSaveStateRegister(). And
then in to ReadSaveStateRegisterByIndex().
With the call:
ReadSaveStateRegisterByIndex (
CpuIndex,
SMM_SAVE_STATE_REGISTER_IOMISC_INDEX,
sizeof(IoMisc.Uint32),
&IoMisc.Uint32
);
The 'IoMisc' can be a cross boundary access during speculative execution.
Later, 'IoMisc' is used as the index to access buffers 'mSmmCpuIoWidth'
and 'mSmmCpuIoType'. One can observe which part of the content within
those buffers was brought into cache to possibly reveal the value of
'IoMisc'.
Hence, this commit adds a AsmLfence() after the check of 'CpuIndex'
within function SmmReadSaveState() to prevent the speculative execution.
A more detailed explanation of the purpose of commit is under the
'Bounds check bypass mitigation' section of the below link:
https://software.intel.com/security-software-guidance/insights/host-firmware-speculative-execution-side-channel-mitigation
And the document at:
https://software.intel.com/security-software-guidance/api-app/sites/default/files/337879-analyzing-potential-bounds-Check-bypass-vulnerabilities.pdf
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1194
Speculative execution is used by processor to avoid having to wait for
data to arrive from memory, or for previous operations to finish, the
processor may speculate as to what will be executed.
If the speculation is incorrect, the speculatively executed instructions
might leave hints such as which memory locations have been brought into
cache. Malicious actors can use the bounds check bypass method (code
gadgets with controlled external inputs) to infer data values that have
been used in speculative operations to reveal secrets which should not
otherwise be accessed.
This commit will focus on the SMI handler(s) registered within the
Variable\RuntimeDxe driver and insert AsmLfence API to mitigate the
bounds check bypass issue.
For SMI handler SmmVariableHandler():
Under "case SMM_VARIABLE_FUNCTION_GET_VARIABLE:",
'SmmVariableHeader->NameSize' can be a potential cross boundary access of
the 'CommBuffer' (controlled external input) during speculative execution.
This cross boundary access is later used as the index to access array
'SmmVariableHeader->Name' by code:
"SmmVariableHeader->Name[SmmVariableHeader->NameSize/sizeof (CHAR16) - 1]"
One can observe which part of the content within array was brought into
cache to possibly reveal the value of 'SmmVariableHeader->NameSize'.
Hence, this commit adds a AsmLfence() after the boundary/range checks of
'CommBuffer' to prevent the speculative execution.
And there are 2 similar cases under
"case SMM_VARIABLE_FUNCTION_SET_VARIABLE:" and
"case SMM_VARIABLE_FUNCTION_VAR_CHECK_VARIABLE_PROPERTY_GET:" as well.
This commits also handles them.
Also, under "case SMM_VARIABLE_FUNCTION_SET_VARIABLE:",
'(UINT8 *)SmmVariableHeader->Name + SmmVariableHeader->NameSize' points to
the 'CommBuffer' (with some offset) and then passed as parameter 'Data' to
function VariableServiceSetVariable().
Within function VariableServiceSetVariable(), there is a sanity check for
EFI_VARIABLE_AUTHENTICATION_2 descriptor for the data pointed by 'Data'.
If this check is speculatively bypassed, potential cross-boundary data
access for 'Data' is possible to be revealed via the below function calls
sequence during speculative execution:
AuthVariableLibProcessVariable()
ProcessVarWithPk() or ProcessVarWithKek()
Within function ProcessVarWithPk() or ProcessVarWithKek(), for the code
"PayloadSize = DataSize - AUTHINFO2_SIZE (Data);", 'AUTHINFO2_SIZE (Data)'
can be a cross boundary access during speculative execution.
Then, 'PayloadSize' is possible to be revealed by the function call
sequence:
AuthServiceInternalUpdateVariableWithTimeStamp()
mAuthVarLibContextIn->UpdateVariable()
VariableExLibUpdateVariable()
UpdateVariable()
CopyMem()
Hence, this commit adds a AsmLfence() after the sanity check for
EFI_VARIABLE_AUTHENTICATION_2 descriptor upon 'Data' within function
VariableServiceSetVariable() to prevent the speculative execution.
Also, please note that the change made within function
VariableServiceSetVariable() will affect DXE as well. However, since we
only focuses on the SMM codes, the commit will introduce a new module
internal function called VariableLoadFence() to handle this. This internal
function will have 2 implementations (1 for SMM, 1 for DXE). For the SMM
implementation, it is a wrapper to call the AsmLfence() API; for the DXE
implementation, it is empty.
A more detailed explanation of the purpose of commit is under the
'Bounds check bypass mitigation' section of the below link:
https://software.intel.com/security-software-guidance/insights/host-firmware-speculative-execution-side-channel-mitigation
And the document at:
https://software.intel.com/security-software-guidance/api-app/sites/default/files/337879-analyzing-potential-bounds-Check-bypass-vulnerabilities.pdf
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1194
Speculative execution is used by processor to avoid having to wait for
data to arrive from memory, or for previous operations to finish, the
processor may speculate as to what will be executed.
If the speculation is incorrect, the speculatively executed instructions
might leave hints such as which memory locations have been brought into
cache. Malicious actors can use the bounds check bypass method (code
gadgets with controlled external inputs) to infer data values that have
been used in speculative operations to reveal secrets which should not
otherwise be accessed.
This commit will focus on the SMI handler(s) registered within the
SmmLockBox driver and insert AsmLfence API to mitigate the
bounds check bypass issue.
For SMI handler SmmLockBoxHandler():
Under "case EFI_SMM_LOCK_BOX_COMMAND_SAVE:", the 'CommBuffer' (controlled
external inputs) is passed to function SmmLockBoxSave().
'TempLockBoxParameterSave.Length' can be a potential cross boundary access
of the 'CommBuffer' during speculative execution. This cross boundary
access is later passed as parameter 'Length' into function SaveLockBox().
Within function SaveLockBox(), the value of 'Length' can be inferred by
code:
"CopyMem ((VOID *)(UINTN)SmramBuffer, (VOID *)(UINTN)Buffer, Length);".
One can observe which part of the content within 'Buffer' was brought into
cache to possibly reveal the value of 'Length'.
Hence, this commit adds a AsmLfence() after the boundary/range checks of
'CommBuffer' to prevent the speculative execution.
And there is a similar case under "case EFI_SMM_LOCK_BOX_COMMAND_UPDATE:"
function SmmLockBoxUpdate() as well. This commits also handles it.
A more detailed explanation of the purpose of commit is under the
'Bounds check bypass mitigation' section of the below link:
https://software.intel.com/security-software-guidance/insights/host-firmware-speculative-execution-side-channel-mitigation
And the document at:
https://software.intel.com/security-software-guidance/api-app/sites/default/files/337879-analyzing-potential-bounds-Check-bypass-vulnerabilities.pdf
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1194
Speculative execution is used by processor to avoid having to wait for
data to arrive from memory, or for previous operations to finish, the
processor may speculate as to what will be executed.
If the speculation is incorrect, the speculatively executed instructions
might leave hints such as which memory locations have been brought into
cache. Malicious actors can use the bounds check bypass method (code
gadgets with controlled external inputs) to infer data values that have
been used in speculative operations to reveal secrets which should not
otherwise be accessed.
This commit will focus on the SMI handler(s) registered within the
FaultTolerantWriteDxe driver and insert AsmLfence API to mitigate the
bounds check bypass issue.
For SMI handler SmmFaultTolerantWriteHandler():
Under "case FTW_FUNCTION_WRITE:", 'SmmFtwWriteHeader->Length' can be a
potential cross boundary access of the 'CommBuffer' (controlled external
inputs) during speculative execution. This cross boundary access is later
passed as parameter 'Length' into function FtwWrite().
Within function FtwWrite(), the value of 'Length' can be inferred by code:
"CopyMem (MyBuffer + Offset, Buffer, Length);". One can observe which part
of the content within 'Buffer' was brought into cache to possibly reveal
the value of 'Length'.
Hence, this commit adds a AsmLfence() after the boundary/range checks of
'CommBuffer' to prevent the speculative execution.
A more detailed explanation of the purpose of commit is under the
'Bounds check bypass mitigation' section of the below link:
https://software.intel.com/security-software-guidance/insights/host-firmware-speculative-execution-side-channel-mitigation
And the document at:
https://software.intel.com/security-software-guidance/api-app/sites/default/files/337879-analyzing-potential-bounds-Check-bypass-vulnerabilities.pdf
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
The PCDs below are unused, so they have been removed from inf.
gEfiShellPkgTokenSpaceGuid.PcdShellFileOperationSize
gEfiMdePkgTokenSpaceGuid.PcdMaximumUnicodeStringLength
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The PCDs below are unused, so they have been removed from inf.
gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize in DpApp.inf
gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize in
DpDynamicCommand.inf
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The PCDs below are unused, so they have been removed from inf.
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleMax
gEfiMdeModulePkgTokenSpaceGuid.PcdSystemRebootAfterCapsuleProcessFlag
gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeSubClassCapsule
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeProcessCapsulesBegin
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeProcessCapsulesEnd
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdatingFirmware
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdateFirmwareSuccess
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdateFirmwareFailed
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeResettingSystem
The library Pcdlib is not linked， so "#include <Library/PcdLib.h>"
is deleted.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The PCD below is unused, so it has been removed from inf.
gUefiCpuPkgTokenSpaceGuid.PcdCpuFeaturesSupport
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The input param String of AsciiStrStr() requires a pointer to
Null-terminated string, however in HttpUtilitiesParse(),
the Buffersize before AllocateZeroPool() is equal to the size
of TCP header, after the CopyMem(), it might not end with
Null-terminator. It might cause memory access overflow.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1204
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Songpeng Li <songpeng.li@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The input param String of AsciiStrStr() requires a pointer to
Null-terminated string, however in HttpTcpReceiveHeader(),
the Buffersize before AllocateZeroPool() is equal to the size
of TCP header, after the CopyMem(), it might not end with
Null-terminator. It might cause memory access overflow.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1204
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Songpeng Li <songpeng.li@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1212
UPD header files generated by GenCfgOpt.py may have
tailing white space from some of the UPD description in DSC,
especially when python script automatically switching lines
for long description string. This patch will always remove
tailing white space for UPD header files.
Test: Verified the patch can remove tailing space in
output header files when UPD DSC contains intentional
tailing white space.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Gao Liming <liming.gao@intel.com>
Cc: Zhu Yonghong <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1211
For reducing maintenance effort, the UPD offset can be
automatic assigned by GenCfgOpt.py following by alignment
requirements.
The usage model as below:
. If UPD offset in DSC file are all '*', GenCfgOpt.py will
assign offset for all UPD automatically. In this case no
need to manually hardcode offset to all UPD in DSC.
. If UPD offset in DSC file are all not '*', GenCfgOpt.py
will use hardcoded offset directly (original usage model)
. Tool does not support mixing scenario so UPD offset in DSC
should be all '*' or all hardcoded but not mixed.
In auto mode UPD offset will be assigned following natural
alignment (size aligned) rule and the whole structure size
will align to either 32bits or 64bits depends on maximal UPD
size in the structure.
Test: Verified by both UPD offset hardcoded or '*' in DSC and
generated UPD header files are correct.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Gao Liming <liming.gao@intel.com>
Cc: Zhu Yonghong <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1214
This patch only updates comment and function description, so has
no functionality impact.
This patch fixes comment typo 'end' to 'start' in GetStartPointer.
GetStartPointer for PEI and DXE has aligned function description,
but GetEndPointer does not.
This patch also aligns GetEndPointer's function description for
PEI and DXE.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The PCDs below are unused, so they have been removed from inf.
gIntelFsp2PkgTokenSpaceGuid.PcdTemporaryRamBase
gIntelFsp2PkgTokenSpaceGuid.PcdTemporaryRamSize
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
The PCDs below are unused, so they have been removed from inf.
gIntelFsp2PkgTokenSpaceGuid.PcdFspMaxPatchEntry
gIntelFsp2PkgTokenSpaceGuid.PcdFspMaxPerfEntry
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
The PCDs below are unused, so they have been removed from inf.
gIntelFsp2PkgTokenSpaceGuid.PcdFspMaxPatchEntry
gIntelFsp2PkgTokenSpaceGuid.PcdFspMaxPerfEntry
gIntelFsp2PkgTokenSpaceGuid.PcdTemporaryRamBase
gIntelFsp2PkgTokenSpaceGuid.PcdTemporaryRamSize
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Commit formats had issues so reverted 9 commits
from IntelFsp2Pkg and IntelFsp2WrapperPkg.
Will re-submit them with correct formats.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1215
This issue is caused by commit 5267926134.
The reason is this commit changed the condition of building page table
in DxeIpl. The code before it will only build page table for the sake
of PcdSetNxForStack. This commit added PcdImageProtectionPolicy and
PcdDxeNxMemoryProtectionPolicy into the logic. But the default value of
PcdImageProtectionPolicy is 02, which means the DxeIpl should build page
table. Due to the fact that EmulatorPkg doesn't support page table at all,
this will cause exception on Windows OS.
This patch solves this issue by setting PcdImageProtectionPolicy to 0
explicitly in EmulatorPkg.dsc.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1215
This issue is caused by commit 5267926134.
The reason is this commit changed the condition of building page table
in DxeIpl. The code before it will only build page table for the sake
of PcdSetNxForStack. This commit added PcdImageProtectionPolicy and
PcdDxeNxMemoryProtectionPolicy into the logic. But the default value of
PcdImageProtectionPolicy is 02, which means the DxeIpl should build page
table. Due to the fact that Nt32Pkg doesn't support page table at all,
this will cause exception on Windows OS.
This patch solves this issue by setting PcdImageProtectionPolicy to 0
explicitly in Nt32Pkg.dsc.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1212
UPD header files generated by GenCfgOpt.py may have
tailing white space from some of the UPD description in DSC,
especially when python script automatically switching lines
for long description string. This patch will always remove
tailing white space for UPD header files.
Test: Verified the patch can remove tailing space in
output header files when UPD DSC contains intentional
tailing white space.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Gao Liming <liming.gao@intel.com>
Cc: Zhu Yonghong <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1211
For reducing maintenance effort, the UPD offset can be
automatic assigned by GenCfgOpt.py following by alignment
requirements.
The usage model as below:
. If UPD offset in DSC file are all '*', GenCfgOpt.py will
assign offset for all UPD automatically. In this case no
need to manually hardcode offset to all UPD in DSC.
. If UPD offset in DSC file are all not '*', GenCfgOpt.py
will use hardcoded offset directly (original usage model)
. Tool does not support mixing scenario so UPD offset in DSC
should be all '*' or all hardcoded but not mixed.
In auto mode UPD offset will be assigned following natural
alignment (size aligned) rule and the whole structure size
will align to either 32bits or 64bits depends on maximal UPD
size in the structure.
Test: Verified by both UPD offset hardcoded or '*' in DSC and
generated UPD header files are correct.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Gao Liming <liming.gao@intel.com>
Cc: Zhu Yonghong <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1210
FixedAtBuild PCD is suggested to be used instead
of FeatureFlag PCD so extend this tool to support.
Also skipped PCDs which commented out by '#'.
Test: Verified with FixedAtBuild PCD for including or
excluding lines in generated UPD header files successfully.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Gao Liming <liming.gao@intel.com>
Cc: Zhu Yonghong <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Remove PCDs
The PCDs below are unused, so they have been removed from inf.
gIntelFsp2PkgTokenSpaceGuid.PcdTemporaryRamBase
gIntelFsp2PkgTokenSpaceGuid.PcdTemporaryRamSize
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
PCDs
The PCDs below are unused, so they have been removed from inf.
gIntelFsp2PkgTokenSpaceGuid.PcdFspMaxPatchEntry
gIntelFsp2PkgTokenSpaceGuid.PcdFspMaxPerfEntry
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
The PCDs below are unused, so they have been removed from inf.
gIntelFsp2PkgTokenSpaceGuid.PcdFspMaxPatchEntry
gIntelFsp2PkgTokenSpaceGuid.PcdFspMaxPerfEntry
gIntelFsp2PkgTokenSpaceGuid.PcdTemporaryRamBase
gIntelFsp2PkgTokenSpaceGuid.PcdTemporaryRamSize
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=967
Request to add a library function for GetAcpiTable() in order
to get ACPI table using signature as input.
After evaluation, we found there are many duplicated code to
find ACPI table by signature in different modules.
This patch adds new EfiLocateXXXAcpiTable() APIs in UefiLib
for the request and also the following patch to remove the
duplicated code.
V2:
ASSERT(FALSE) and return NULL instead of real implementation for the
new APIs as the IntelFrameworkPkg is a to-be-deprecated packages.
Cc: Younas khan <pmdyounaskhan786@gmail.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=886
This patch is to support the TFTP windowsize option described in RFC 7440.
The feature allows the client and server to negotiate a window size of
consecutive blocks to send as an alternative for replacing the single-block
lockstep schema.
Currently, the windowsize for write request operation is not supported since
there is no real use cases.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Shao Ming <ming.shao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=886
This patch is to support the TFTP windowsize option described in RFC 7440.
The feature allows the client and server to negotiate a window size of
consecutive blocks to send as an alternative for replacing the single-block
lockstep schema.
Currently, the windowsize for write request operation is not supported since
there is no real use cases.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Shao Ming <ming.shao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
If Structure PCD and Normal Pcd refer to the
same EFI variable, do EFI variable merge, otherwise, do
EFI variable combination.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Replace dict with OrderedDict for PCD so that
the pcd list has same order.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Currently, "gcc-4.8.5-28.el7_5.1.x86_64" generates the following code for
me, from the XADD inline assembly added to "X64/GccInline.c" in commit
17634d026f:
> 0000000000004383 <InternalSyncIncrement>:
> UINT32
> EFIAPI
> InternalSyncIncrement (
> IN volatile UINT32 *Value
> )
> {
> 4383: 55 push %rbp
> 4384: 48 89 e5 mov %rsp,%rbp
> 4387: 48 83 ec 10 sub $0x10,%rsp
> 438b: 48 89 4d 10 mov %rcx,0x10(%rbp)
> UINT32 Result;
>
> __asm__ __volatile__ (
> 438f: 48 8b 55 10 mov 0x10(%rbp),%rdx
> 4393: 48 8b 45 10 mov 0x10(%rbp),%rax
> 4397: b8 01 00 00 00 mov $0x1,%eax
> 439c: f0 0f c1 00 lock xadd %eax,(%rax)
> 43a0: ff c0 inc %eax
> 43a2: 89 45 fc mov %eax,-0x4(%rbp)
> : "m" (*Value) // %2
> : "memory",
> "cc"
> );
>
> return Result;
> 43a5: 8b 45 fc mov -0x4(%rbp),%eax
> }
> 43a8: c9 leaveq
> 43a9: c3 retq
>
The MOV $0X1,%EAX instruction corrupts the address of Value in %RAX before
we reach the XADD instruction. In fact, it makes no sense for XADD to use
%EAX as source operand and (%RAX) as destination operand at the same time.
The XADD instruction's destination operand is a read-write operand. The
GCC documentation states:
> The ordinary output operands must be write-only; GCC will assume that
> the values in these operands before the instruction are dead and need
> not be generated. Extended asm supports input-output or read-write
> operands. Use the constraint character `+' to indicate such an operand
> and list it with the output operands. You should only use read-write
> operands when the constraints for the operand (or the operand in which
> only some of the bits are to be changed) allow a register.
(The above is intentionally quoted from the oldest GCC release that edk2
supports, namely gcc-4.4:
<https://gcc.gnu.org/onlinedocs/gcc-4.4.7/gcc/Extended-Asm.html>.)
Fix the operand list accordingly.
With the patch applied, I get:
> 0000000000004383 <InternalSyncIncrement>:
> UINT32
> EFIAPI
> InternalSyncIncrement (
> IN volatile UINT32 *Value
> )
> {
> 4383: 55 push %rbp
> 4384: 48 89 e5 mov %rsp,%rbp
> 4387: 48 83 ec 10 sub $0x10,%rsp
> 438b: 48 89 4d 10 mov %rcx,0x10(%rbp)
> UINT32 Result;
>
> __asm__ __volatile__ (
> 438f: 48 8b 55 10 mov 0x10(%rbp),%rdx
> 4393: 48 8b 45 10 mov 0x10(%rbp),%rax
> 4397: b8 01 00 00 00 mov $0x1,%eax
> 439c: f0 0f c1 02 lock xadd %eax,(%rdx)
> 43a0: ff c0 inc %eax
> 43a2: 89 45 fc mov %eax,-0x4(%rbp)
> : // no inputs that aren't also outputs
> : "memory",
> "cc"
> );
>
> return Result;
> 43a5: 8b 45 fc mov -0x4(%rbp),%eax
> }
> 43a8: c9 leaveq
> 43a9: c3 retq
Note that some other bugs remain in
"BaseSynchronizationLib/*/GccInline.c"; those should be addressed later,
under <https://bugzilla.tianocore.org/show_bug.cgi?id=1208>.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1207
Fixes: 17634d026f
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
V3 changes include:
1. Keep the ReservedX not change if bit info not changed for this field.
V2 changes include:
1. Use X in ReservedX fields from totally new value if MSR structure definition changed.
For example, if in current structure, the max reserved variable is Reserved2, in new
definition, reserved variable is begin with Reserved3.
V1 Changes:
Changes includes:
1. Update MSR structure definition, change some reserved fields to useful fields:
1. MSR_XEON_PHI_PKG_CST_CONFIG_CONTROL_REGISTER
2. MSR_XEON_PHI_SMM_MCA_CAP_REGISTER
2. For MSR_XEON_PHI_PMG_IO_CAPTURE_BASE_REGISTER structure, it expand the field range.
Old definition like below:
typedef union {
///
/// Individual bit fields
///
struct {
///
/// [Bits 15:0] LVL_2 Base Address (R/W).
///
UINT32 Lvl2Base:16;
///
/// [Bits 18:16] C-state Range (R/W) Specifies the encoding value of the
/// maximum C-State code name to be included when IO read to MWAIT
/// redirection is enabled by MSR_PKG_CST_CONFIG_CONTROL[bit10]: 100b - C4
/// is the max C-State to include 110b - C6 is the max C-State to include.
///
UINT32 CStateRange:3;
UINT32 Reserved1:13;
UINT32 Reserved2:32;
} Bits;
///
/// All bit fields as a 32-bit value
///
UINT32 Uint32;
///
/// All bit fields as a 64-bit value
///
UINT64 Uint64;
} MSR_XEON_PHI_PMG_IO_CAPTURE_BASE_REGISTER;
This patch make below changes for this data structure, it expand "CStateRange" field width.
old one:
UINT32 CStateRange:3;
UINT32 Reserved1:13;
new one:
UINT32 CStateRange:7;
UINT32 Reserved1:9;
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
V3 changes include:
1. Keep ReservedX not change if bit info not changed for this field.
V2 changes include:
1. Use X in ReservedX fields from totally new value if MSR structure definition changed.
For example, if in current structure, the max reserved variable is Reserved2, in new
definition, reserved variable is begin with Reserved3.
V1 Changes includes:
1. Change fields which is reserved in old version: MSR_IA32_RTIT_CTL_REGISTER
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Latest SDM has moved MSR related content from volume 3 chapter 35 to volume 4
chapter 2. Current MSR's comments need to be updated to reference the new
chapter info.
Changes includes:
1. Update referenced chapter info from some MSRs.
2. Update referenced SDM version info.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1187
The patch reverts 9c8c4478cf
"UefiCpuPkg/MtrrLib: Skip Base MSR access when the pair is invalid".
Microsoft Windows will report an error in event manager if MTRR
usage is different across hibernate even when the difference is
in an non valid MTRR pair. This seems like a bug in Windows but
for compatibility and servicing reasons we think a change in UEFI
would wise.
A Windows change has already been submitted for the next iteration
(2019 time frame).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
The change doesn't have functionality impact.
It just renames the mIoMmuProtocol to mIoMmu and moves the
declaration from PciRootBridgeIo.c to PciHostBridge.h.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Suggested-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1196
RootBridgeIoCheckParameter() verifies that the requested MMIO access
can fit in any of the MEM/PMEM 32/64 ranges. But today's logic
somehow only checks the requested access against MEM 32/64 ranges.
It should also check the requested access against PMEM 32/64 ranges.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Garrett Kirkendall <garrett.kirkendall@amd.com>
BZ#1116: https://bugzilla.tianocore.org/show_bug.cgi?id=1116
The usage of following PCDs described in MdeModulePkg.dec don't match
the implementation exactly. This patch updates related description in
both .dec and .uni files to avoid confusion in platform configuration.
PcdSetNxForStack
PcdImageProtectionPolicy
PcdDxeNxMemoryProtectionPolicy
The main change is at the statement on how to handle the FALSE or 0
setting value in those PCDs. Current statement says the implementation
should unset or disable related features but in fact the related code
just do nothing (leave it to AS-IS). That means the result might be
disabled, or might be not. It depends on other features or platform
policy.
For example, if one don't want to enforce NX onto stack memory, he/she
needs to set PcdSetNxForStack to FALSE as well as to clear BIT4 of
PcdDxeNxMemoryProtectionPolicy.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
The following rules are specially proposed by package owner:
* Remove CommonIpf.dsc file.
* Update Common.dsc file, to remove the section with IPF key.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
The following rules are specially proposed by package owner:
* Remove whole "CryptRuntimeDxe" folder which was designed for IPF.
* Remove whole "Include/Protocol" folder
* Update .Dec and .Dsc file accordingly.
Cc: Qin Long <qin.long@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Remove PalLib in dsc which was missed at 64bbf1d.
The PalLib is IPFspecific and will be removed from MdePkg.
So this patch removes PalLib in IntelFrameworkModulePkg.dsc
which was missed at 64bbf1dee2.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1197
Today's InterlockedIncrement()/InterlockedDecrement() guarantees to
perform atomic increment/decrement but doesn't guarantee the return
value equals to the new value.
The patch fixes the behavior to use "XADD" instruction to guarantee
the return value equals to the new value.
The patch calls intrinsic functions for MSVC tool chain, calls the
NASM implementation for INTEL tool chain and calls GCC inline
assembly implementation (GccInline.c) for GCC tool chain.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
For structure Pcd, the latter full assign value in commandLine should
override the former field assign value. For example in commandLine,
build --pcd Token.pcd.field="haha" --pcd Token.pcd=H"{0x01,0x02}",
the former field value "haha" will be ignored and overwrite by the latter
full value "{0x01,0x02}".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1191
Before commit e21e355e2c, jmp _SmiHandler
is commented. And below code, ASM_PFX(CpuSmmDebugEntry) is moved into rax,
then call it. But, this code doesn't work in XCODE5 tool chain. Because XCODE5
doesn't generated the absolute address in the EFI image. So, rax stores the
relative address. Once this logic is moved to another place, it will not work.
; jmp _SmiHandler ; instruction is not needed
...
mov rax, ASM_PFX(CpuSmmDebugEntry)
call rax
Commit e21e355e2c is to support XCODE5.
One tricky way is selected to fix it. Although SmiEntry logic is copied to
another place and run, but here jmp _SmiHandler is enabled to jmp the original
code place, then call ASM_PFX(CpuSmmDebugEntry) with the relative address.
mov rax, strict qword 0 ; mov rax, _SmiHandler
_SmiHandlerAbsAddr:
jmp rax
...
call ASM_PFX(CpuSmmDebugEntry)
Now, BZ 1191 raises the issue that SmiHandler should run in the copied address,
can't run in the common address. So, jmp _SmiHandler is required to be removed,
the code is kept to run in copied address. And, the relative address is
requried to be fixed up to the absolute address. The necessary changes should
not affect the behavior of platforms that already consume PiSmmCpuDxeSmm.
OVMF SMM boot to shell with VS2017, GCC5 and XCODE5 tool chain has been verified.
...
mov rax, strict qword 0 ; call ASM_PFX(CpuSmmDebugEntry)
CpuSmmDebugEntryAbsAddr:
call rax
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
After admin password reach the TryLimit value, code logic will direct return
error password result no matter which password been inputted. So even correct
user password will return TryLimit error.
Now update code logic to also check user password. Only when both user/admin
password reach the TryLimit count, code will return exceed TryLimit error.
Change-Id: I17fbd1425b77150eb933a5002a1f87a0f0032e9b
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1182
Some devices can be non removable (such as eMMC) and checking
Present State Register on host controller may falsely return
an information that device is not present. Execute this
check conditionally on the SloType field value.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1185
SdMmcHcReset used to set all bits of Software Reset Register to 1
including reserved ones, which on some controllers may result in
timeout.
Now only first bit is set, which means "Software Reset for All".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
FlexibleFieldName was never used not set.
DefinitionPosition (file and line number) are recalculated
and never used outside the function. remove the saving of the
data.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
1) use namedtuple instead of custom class when apropriate
2) rename collections.OrderedDict to OrderedDict since we import it already
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
1) use decorators
2) also change some private functions to public when all callers are
external
3) change external callers to use functions instead of directly
accessing private data.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1152
v2: Sync the same logic to Ipv6 and update code comments.
The PXE driver installs a SNP and open this SNP with attribute BY_DRIVER
to avoid it being opened by MNP driver, this SNP is also expected not to
be opened by other drivers with EXCLUSIVE attribute. In some cases, other
drivers may happen to do this by error, and thus cause a system crash.
This patch adds EXCLUSIVE attribute when opening SNP in PXE driver, and
will reject all OpenProtocol requests by EXCLUSIVE.
Cc: Subramanian, Sriram <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1169
PCI spec:
They are also required to always implement function 0 in the device.
Implementing other functions is optional and may be assigned in any
order (i.e., a two-function device must respond to function 0 but
can choose any of the other possible function numbers (1-7) for the
second function).
This patch updates ScanPciBus() to not scan other functions if
function 0 is not implemented.
Test done:
Added debug code below in the second loop of ScanPciBus(),
compared the debug logs with and without this patch, many
non-0 unimplemented functions are skipped correctly.
DEBUG ((
DEBUG_INFO,
"%a() B%02xD%02xF%02x VendorId: %04x DeviceId: %04x\n",
__FUNCTION__,
Bus,
Device,
Function,
VendorID,
DeviceID
));
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
Cc: Tomson Chang <tomson.chang@intel.com>
Cc: Jenny Huang <jenny.huang@intel.com>
Cc: Amy Chan <amy.chan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=996
Issue:
In current code logic, when a key is pressed, it will search
the whole NotifyList to find whether a notification has been
registered with the keystroke. if yes, it will en-queue the
key for notification execution later. And now if different
notification functions have been registered with the same key,
then the key will be en-queued more than once. Then it will
cause the notification executed more than once.
This patch is to enhance the code logic to fix this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=996
Issue:
In current code logic, when a key is pressed, it will search
the whole NotifyList to find whether a notification has been
registered with the keystroke. if yes, it will en-queue the
key for notification execution later. And now if different
notification functions have been registered with the same key,
then the key will be en-queued more than once. Then it will
cause the notification executed more than once.
This patch is to enhance the code logic to fix this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=996
Issue:
In current code logic, when a key is pressed, it will search
the whole NotifyList to find whether a notification has been
registered with the keystroke. if yes, it will en-queue the
key for notification execution later. And now if different
notification functions have been registered with the same key,
then the key will be en-queued more than once. Then it will
cause the notification executed more than once.
This patch is to enhance the code logic to fix this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: <Jiewen.yao@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: <Jiewen.yao@intel.com>
This patch align the boolean type PCD value's display in the build
report. Original it may display 0x0, also may use 0 for the same PCD.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Add NmakeSubdirs.py to replace NmakeSubdirs.bat in VS Makefile. This script will
invoke nmake in multi thread mode. It can save more than half time of BaseTools
C clean build.
GCC make supports multiple thread in make phase. So, GNUmakefile doesn't need apply
this script.
single task or job=1:
just single thread and invoke subprocess,subprocess will use
system.stdout to print output.
multi task:
thread number is logic cpu count.All subprocess output will pass to
python script by PIPE and then script print it to system.stdout.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dongao Guo<dongao.guo@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Test-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1167
When the HSEE in the USBCMD bit is a ‘1’ and the HSE bit in the
USBSTS register is a ‘1’, the xHC shall assert out-of-band error
signaling to the host and assert the SERR# pin.
To prevent masking any potential issues with SERR, this patch is
to set USBCMD Host System Error Enable(HSEE) Bit if PCICMD SERR#
Enable Bit is set.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Fei1 Wang <fei1.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Build tool should report warning if a platform
defines [DefaultStores] but forgets to defined
PcdNvStoreDefaultValueBuffer as PcdsDynamicExVpd in dsc file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch is going to fix the issue that
The Pcd field value is override incorrectly when there
is no Pcd overall value assignment in Dsc file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The case is user use 0x1} as a hex value for Pcd, it directly cause
tool report traceback info. This patch add more error info.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Today's implementation does an exact device path match to check
whether the device path of a console is in ConIn/ConOut/ErrOut.
But that doesn't work for the USB keyboard.
Because when a platform have multiple USB port, ConIn needs to
carry all device paths corresponding to each port.
Even worse, today's BDS core logic removes the device path from
ConIn/ConOut/ErrOut when the connection to that device path fails.
So if user switches the USB keyboard from one port to another across
boot, the USB keyboard doesn't work in the second boot.
ConPlatform driver solved this problem by adding the
IsHotPlugDevice() function. So that for USB keyboard, ConPlatform
doesn't care whether its device path is in ConIn or not.
But the rule is too loose, and now causes platform BDS cannot control
whether to enable USB keyboard as an active console.
The patch changes ConPlatform to support USB short-form device path
when checking whether the device path of a console is in
ConIn/ConOut/ErrOut.
The logic to always accept USB/PCCARD device as active console is
removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When build with WinSDK <= Win10 TH2, the terminal over CMD.exe
doesn't work. Because Win10 later than TH2 starts to support VT
terminal.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Since the emulator under Windows is enabled, the patch changes
README to include the information of emulator under Windows.
It also changes README to Readme.md for better looking.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
This feature is the same as Stack Guard enabled in driver CpuDxe but
applies to PEI phase. Due to the specialty in PEI module dispatching,
this driver is changed to do the actual initialization in notify
callback of event gEfiPeiMemoryDiscoveredPpiGuid. This can let the
stack guard apply to as most PEI drivers as possible.
To let Stack Guard work, some simple page table management code are
introduced to setup Guard page at base of stack for each processor.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: "Ware, Ryan R" <ryan.r.ware@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Stack Guard needs to setup stack switch capability to allow exception
handler to be called with good stack if stack overflow is detected.
This patch update InitializeCpuExceptionHandlersEx() to allow pass
extra initialization data used to setup exception stack switch for
specified exceptions.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: "Ware, Ryan R" <ryan.r.ware@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
PEI Stack Guard needs to enable paging before DxeIpl. This might cause
#GP in the transition from 32-bit PEI to 64-bit DXE due to the code
trying to write CR3 register with PML4 page table while the processor
is enabled with PAE paging.
Simply disabling paging before updating CR3 can solve this conflict.
There's no such issue for 64-bit PEI so this change applies only to
32-bit code.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: "Ware, Ryan R" <ryan.r.ware@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
In V2, Remove GetImageReadFunction(), directly use PeiImageRead().
The copy PeiImageReadForShadow function doesn't improve the boot performance.
This patch removes this copy logic to simplify the code logic.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
UEFI Sct validates Dma mapping. For CoherentDmaLib it always failed
because there were no required checks present in DmaMap.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The only valid memory types for DmaAlignedBuffer should be
EfiBootServicesData and EfiRuntimeServicesData. However due to the typo,
there is no way to allocate runtime pages, and INVALID_PARAMETER is
always returned. Fix the typo.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The EhcReset(), EhcGetRootHubPortStatus() and EhcDriverBindingStart()
functions need to see whether the host controller (or a specific port on
the host controller) can be accessed, dependent on the controller having
(or the specific port being) an in-use debug port. Because the condition
isn't simple, extract it to a separate function.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Suggested-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Some local variables are initialized but never used.
GCC complains about that. The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1145
Currently run PatchCheck.py with Python3 will meet
following error:
.....
File "PatchCheck.py", line 554, in run_git
return Result[0].decode('utf-8', 'ignore') if Result[0] and
Result[0].find("fatal")!=0 else None
TypeError: a bytes-like object is required, not 'str'
This issue was introduce by commit:5ac4548cdf654.
This patch is to convert the str object of "fatal" to
byte object to fix this failure.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Defined a pcd in Ovmf.dec and used that pcd in AcpiPlatformDxe.inf,
then assign a value to that pcd from DSC, then build Ovmf platform
successfully. But this Pcd was wrongly listed into not used section
in the report.txt file.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Fix trailing white spaces and invalid line ending issue.
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Commit 09943f5ecc ("MdeModulePkg: Skip to manage usb debug port in EDKII
EHCI driver if it's used by usb debug port driver", 2012-04-28) made the
host controller reset in EhcDriverBindingStart() conditional. The intent
was to avoid the reset when
- one of the USB ports on the host controller was a Debug Port, AND
- the Debug Port was in use.
This translates to the following positive condition: reset the controller
only if:
- no USB port on the host controller is a Debug Port, OR
- the Debug Port is not in use.
Commit 09943f5ecc failed to implement the first subcondition, and thus
the result is too strict now (for resetting the host controller). Relax it
to the correct condition.
This issue was found by Steven Shi on QEMU. QEMU's EHCI device model does
not have a Debug Port. In repeated disconnect / connect cycles, the
controller is never reset in EhcDriverBindingStart(), therefore the
devices on the controller are never re-enumerated after a disconnect.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reported-by: Steven Shi <steven.shi@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1129
Fixes: 09943f5ecc
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Tested-by: Steven Shi <steven.shi@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1115
When the type of HiiValue is EFI_IFR_TYPE_BUFFER,
its question type is EFI_IFR_ORDERED_LIST_OP.
And the buffer size allocated for Statement->BufferValue
of orderedList is "Statement->StorageWidth"
in IfrParse.c.
So here when backup the buffer value and copy the size of
"Statement->StorageWidth + sizeof(CHAR16)" is incorrect.
This patch is to fix this issue.
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
When an exception happens in AP, system hangs at
GetPeiServicesTablePointer(), complaining the PeiServices retrieved
from memory before IDT is NULL.
Due to the following commit:
c563077a38
* UefiCpuPkg/MpInitLib: Avoid calling PEI services from AP
the IDT used by AP no longer preserve PeiServices pointer in the
very beginning.
But the implementation of PeiExceptionHandlerLib still assumes
the PeiServices pointer is there, so the assertion happens.
The patch fixes the exception handler library to not call
PEI services from AP.
The patch duplicates the #0 exception stub header in an allocated
pool but with extra 4-byte/8-byte to store the exception handler
data which was originally stored in HOB.
When AP exception happens, the code gets the exception handler data
from the exception handler for #0.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Fan Jeff <vanjeff_919@hotmail.com>
Today's implementation of handling HOOK_BEFORE and HOOK_AFTER is
a bit complex. More comments is better.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Fan Jeff <vanjeff_919@hotmail.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
1. Not append trailing zero for PcdValue
2. make sure the point to Variable Name in PCD
DataBase 2 bytes aligned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Fixed the pcd value override issue when Dynamic Pcd is from
command line but is not list in Dsc file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch updates IP4 stack to support 32bit subnet mask in PXE boot process.
When 32bit subnet mask is used, the IP4 driver couldn't use the subnet mask to determine
whether destination IP address is on-link or not, so it will always try to send all the
packets to the destination IP address directly first, if failed it will continue
to try the default gateway.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1121
To produce a EFI_BLOCK_IO_PROTOCOL instance in Emulator platform,
EmulatorPkg defines the EMU_IO_THUNK_PROTOCOL. OS dependent layer
needs to produce this protocol implementation and a generic OS
independent layer consumes this protocol to produce
EFI_BLOCK_IO_PROTOCOL.
EMU_IO_THUNK_PROTOCOL can also be used to abstract the OS dependent
IO operation for other UEFI protocols, e.g.: GOP, SimpleFileSystem
and etc.
It contains two interfaces Open() and Close(). Open() creates the
specific IO instances, e.g. for Block IO access, File System access,
Screen access, etc. Close() destroys the specific IO instances.
Later on the Emulator generic module (e.g.: EmuBlockIoDxe) calls
Open() to create the IO instance in DriverBindingStart() and calls
Close() in DriverBindingStop().
But today's implementation of DriverBindingStop() contains a bug
that it calls Close() before uninstalling the EFI_BLOCK_IO_PROTOCOL.
It's a mistake in code. Take EFI_BLOCK_IO for example,
the uninstallation may cause the upper layer driver that consumes
EFI_BLOCK_IO call BlockIo.Reset(), which consequently calls
EmuBlockIo.Reset(). But the EmuBlockIo instance is already destroyed
by Close() that happens before uninstallation.
So a proper implementation is to call Close() after uninstallation
succeeds.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1121
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Andrew Fish <afish@apple.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1120
Logo is enabled by adding a separate core driver LogoDxe.
UiApp and BootManagerMenuApp are added to provide two UIs.
LoadFileOnFv2 is added to auto-install LoadFile protocol for
applications in FV so the boot options for applications can be
auto-created from LoadFile.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
Developer can build the Win Host in VS2017 and launch to debug it.
Platform 'x64' is to build 64bit EmulatorWin.
Platform 'Win32' is to build 32bit EmulatorWin.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1119
Today's implementation reports CPU address size as 36 through CPU
HOB. But when WinHost is running at 64bit, the system memory might
be allocated above 2^36.
It causes system asserts when DxeCore code tries to find the
corresponding GCD entry for a given valid address.
The patch uses 57 as the CPU address size which is maximum linear
address size when 5-level paging is enabled in host OS.
Using 64 seems more proper and a one-time change even 6-level
paging might be invented. But it causes CoreInitializeGcdServices()
assertion on following code:
Entry->EndAddress = LShiftU64 (1, SizeOfMemorySpace) - 1;
Because LShiftU64 expects SizeOfMemorySpace < 64.
So to be practical, I didn't report 64 and change
CoreInitializeGcdServices().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
IsSupportedArch and IsBinaryModule return the same value under the same
curcimstances. Remove newer one with fewer callers and send them to the
other function.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1099
Update SmbiosView to parse the new definitions which
are introduced in SMBIOS3.2.0
V2:
1. Add structure length check before dump the fileds in
Type 9 and Type 17 in case some fileds are not organized
and reported by drivers.
2. Dump the InterfaceTypeSpecificData in Type 42.
V3:
1. Correct the structure length in Type17.
2. Remove the redundant check "if (PeerGroupCount > 0)" in Type 9.
3. Use the Uint16 filed instead of Bits field in union
MEMORY_DEVICE_OPERATING_MODE_CAPABILITY to dump data.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The patch is the result of running
"BaseTools/Scripts/FormatDosFiles.py EmulatorPkg/"
No functionality impact.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
BZ#1127: https://bugzilla.tianocore.org/show_bug.cgi?id=1127
It's reported the debug message in CpuDxe driver is quite annoying in
boot and shell, and slow down the boot process. To solve this issue,
this patch changes the DEBUG_INFO to DEBUG_VERBOSE. On a typical Intel
real platform, at least 16s boot time can be saved.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Since SMM profile feature has already implemented non-stop mode if #PF
occurred, this patch just makes use of the existing implementation to
accommodate heap guard and NULL pointer detection feature.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Same as SMM profile feature, a special #PF is used to set page attribute
to 'present' and a special #DB handler to reset it back to 'not-present',
right after the instruction causing #PF got executed.
Since the new #PF handler won't enter into dead-loop, the instruction
which caused the #PF will get chance to re-execute with accessible pages.
The exception message will still be printed out on debug console so that
the developer/QA can find that there's potential heap overflow or null
pointer access occurred.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Once the #PF handler has set the page to be 'present', there should
be a way to reset it to 'not-present'. 'TF' bit in EFLAGS can be used
for this purpose. 'TF' bit will be set in interrupted function context
so that it can be triggered once the cpu control returns back to the
instruction causing #PF and re-execute it.
This is an necessary step to implement non-stop mode for Heap Guard
and NULL Pointer Detection feature.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
The change is part of requirement tracked by #BZ1095
https://bugzilla.tianocore.org/show_bug.cgi?id=1095
Background:
Heap Guard and NULL Pointer Detection are very useful features to detect
code flaw in EDK II. If an issue is detected, #PF exception will be
triggered and the BIOS will enter into dead loop, which is the default
behavior of exception handling. From QA perspective, this default behavior
will block them to collect all tests result in reasonable time.
The solution is to introduce non-stop mode to Heap Guard and NULL Pointer
Detection features. This needs to update CpuDxe, PiSmmCpuDxeSmm and
CpuExceptionHandlerLib to allow the code to continue execution after #PF.
The mechanism behind it is the same as SMM Profile feature, in which a
special #PF handler is registered to set the page causing #PF to be
'present' and setup single steop trap, then return the control back to
the instruction accessing that page. Once the instruction is re-executed,
a #DB is triggered and a special handler for it will be called to reset
the page back to 'not-present'.
The non-stop mode is controlled by BIT6 of following PCDs
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPropertyMask
gEfiMdeModulePkgTokenSpaceGuid.PcdNullPointerDetectionPropertyMask
BIT6 of PcdHeapGuardPropertyMask is used to enable/disable non-stop mode
of Heap Guard feature. It applies to both UEFI and SMM heap guard, if
any of them is enabled.
BIT6 of PcdNullPointerDetectionPropertyMask is used to enable/disable
non-stop mode of NULL Pointer Detection feature. It applies to both
UEFI and SMM NULL Pointer Detection, if any of them is enabled.
The default setting is 'disable', meaning the boot will stop at #PF
exception.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
current use (0x41>=~0x0&0x41|0x0) as Pcd value cause build failure
because the ~ is not correctly recognized.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add check for the datum type keyword "VOID*", only the VOID* type
Pcd need the additional maxsize info.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Call BS.AllocatePages in DXE driver and call SMM FreePages with the address of the buffer allocated in the DXE driver. SMM FreePages success and add a non-SMRAM range into SMM heap list. This is not an expected behavior. SMM FreePages should return error for this case and not free the pages.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1098
Change-Id: Ie5ffa1ac62c558aa418a8a3d7d0e8158b846e13b
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1099
Add SMBIOS 3.2.0 definitions according to
www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.2.0.pdf.
Processor Information (Type 4):
- SMBIOSCR00163: add socket LGA2066
- SMBIOSCR00173: add Intel Core i9
- SMBIOSCR00176: add new processor sockets
Port Connector Information (Type 8):
- SMBIOSCR00168: add USB Type-C
System Slots (Type 9):
- SMBIOSCR00164: add "unavailable" to current usage field
- SMBIOSCR00167: add support for PCIe bifurcation
Memory Device (Type 17):
- SMBIOSCR00162: add support for NVDIMMs
- SMBIOSCR00166: extend support for NVDIMMs and add support for logical memory type
- SMBIOSCR00172: rename "Configured Memory Clock Speed" to "Configured Memory Speed"
- SMBIOSCR00174: add new memory technology value (Intel Persistent Memory, 3D XPoint)
IPMI Device Information (Type 38):
- SMBIOSCR00171: add SSIF
Management Controller Host Interface (Type 42)
- SMBIOSCR00175: fix structure data parsing issue
V2: Add missing update to MISC_PORT_TYPE and SMBIOS_TABLE_TYPE9.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The EDK Shell is end of line so the FS mapping to old EDK
Shell bin directory is better to be removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1117
The root cause is when a file is opened through File.Open(), the
private data for the File is not allocated, so when later
when File.Close() is called, the signature check in CR() causes
the assertion.
The private data for the File is allocated properly when the file
is opened from FS.OpenVolume().
The patch also fixes a minor issue that wrongly assigns
revision number to File.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1079
Without signal of EndOfDxe, the 3rd party code (.efi from non-flash
storage) cannot run. It's forbidden by
8be37a5cee
*MdeModulePkg/SecurityStubDxe: Defer 3rd party image before EndOfDxe
The patch enables running of SCT from internal shell.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
Now firmware can display the time correctly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
Now the firmware can boot to Shell and count down 5 seconds to
command prompt.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
The patch adds GOP and SimpleTextIn[Ex] support.
Now firmware can boot to UI and Shell but timer doesn't work.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Andrew Fish <afish@apple.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The patch implements Stdin/Stdout/Stderr access so that
the native OS console (cmd.exe) can be used as the firmware
console and debug message can also be routed to it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
This is the initial patch to make it boot to early DXE
phase without display (only debug message).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
VS compiler complains converting UINTN to UINT16 causes data lost.
Add typecast to fix the build failure.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Andrdw Fish <afish@apple.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1109
Today's restriction of VGA device is to have only one VGA device
enabled per PCI segment. It's not correct because several segments
may share one IO / MMIO address space.
We should restrict to have one VGA per Host Bridge because each
Host Bridge has its only IO / MMIO address space.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1109
The patch doesn't change any behavior of this function.
It just renames the function to LocateVgaDevice() and renames
some parameters and local variables.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Since hotkey 'f' is used to start AndroidFastbootApp. If user
press 'f' key too long, it may be recognized pressing 'f' key
multiple times. Then AndroidFastbootApp exists since it delcares
any key press could make it exit.
So only use ENTER or SPACE key to exit AndroidFastbootApp.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The redundant functions which are never called have been removed.
They are AtaNonDataCommandInExt,IDEBusDriverConfigurationSetOptions,
GetResponse,IDEBusDriverConfigurationOptionsValid and
IDEBusDriverConfigurationForceDefaults.
https://bugzilla.tianocore.org/show_bug.cgi?id=1063
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
V2: Add --target-name to specify the file name to create
Because Ecc.py was renamed to EccMain.py
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In commit 81502cee20 ("BaseTools/Source/C: take EXTRA_LDFLAGS from the
caller", 2018-08-16), I missed that "VfrCompile/GNUmakefile" does not use
BUILD_LFLAGS in the APPLICATION linking rule, unlike "app.makefile" does.
Instead, "VfrCompile/GNUmakefile" uses the (undefined) LFLAGS macro.
Therefore commit 81502cee20 did not cover the linking step of
VfrCompile.
Thankfully, the structure of the linking rules is the same, between
"app.makefile" and "VfrCompile/GNUmakefile". Rename the undefined LFLAGS
macro in "VfrCompile/GNUmakefile" to VFR_LFLAGS (for consistency with
VFR_CXXFLAGS), and set it to EXTRA_LDFLAGS.
As a result, we have:
| compilation | linking
-----------+--------------------------------+----------------------
VfrCompile | VFR_CXXFLAGS = | VFR_LFLAGS =
| BUILD_OPTFLAGS = | EXTRA_LDFLAGS
| '-O2' + EXTRA_OPTFLAGS |
-----------+--------------------------------+----------------------
other apps | BUILD_CFLAGS/BUILD_CXXFLAGS = | BUILD_LFLAGS =
| [...] + BUILD_OPTFLAGS = | [...] + EXTRA_LDFLAGS
| [...] + '-O2' + EXTRA_OPTFLAGS |
This table shows
- that the VfrCompile compilation and linking flags are always a subset of
the corresponding flags used by the other apps,
- and that the EXTRA flags are always at the end.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1540244
Fixes: 81502cee20
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
While reviewing the patch that would land as 768b611136
("MdePkg/UefiLib: introduce EfiOpenFileByDevicePath()", 2018-08-16), Ray
pointed out that distinguishing EFI_FILE_MODE_CREATE was wasteful. Per
spec, if the file to create exists, then EFI_FILE_MODE_CREATE is ignored
by EFI_FILE_PROTOCOL.Open(), and the existent file is opened.
Therefore we don't need an attempt to "open-but-not-create" first, and a
fallback to "open-and-create-too" second -- that behavior is internal to
EFI_FILE_PROTOCOL.Open(). Remove the special-casing of
EFI_FILE_MODE_CREATE.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Suggested-by: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1074
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1.After the cleanup at "MdeModulePkg UiApp: Remove redundant functions",
the function "IsResetReminderFeatureEnable()" and the variable
"mFeaturerSwitch" become redundant so they have been removed.
2.Therefore, the "IF" expression has also been removed, whose judgment condition
is "IsResetReminderFeatureEnable()".
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The functions that are never called have been removed.
They are IsImageInsideSmram,FindImageRecord,SmmRemoveImageRecord,
SmmMemoryAttributesTableConsistencyCheck,DumpSmmMemoryMapEntry,
SmmMemoryMapConsistencyCheckRange,SmmMemoryMapConsistencyCheck,
DumpSmmMemoryMap,ClearGuardMapBit,SetGuardMapBit,AdjustMemoryA,
AdjustMemoryS,IsHeadGuard and IsTailGuard.
FindImageRecord() is called by SmmRemoveImageRecord(); however,
nothing calls SmmRemoveImageRecord().
SmmMemoryMapConsistencyCheckRange() is called by
SmmMemoryMapConsistencyCheck(); however, nothing calls
SmmMemoryMapConsistencyCheck().
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
v2:append the following to the commit message.
- FindImageRecord() is called by SmmRemoveImageRecord(); however,
nothing calls SmmRemoveImageRecord().
- SmmMemoryMapConsistencyCheckRange() is called by
SmmMemoryMapConsistencyCheck(); however, nothing calls
SmmMemoryMapConsistencyCheck().
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The functions that are never called have been removed.
They are UfsPeimUnlinkMemBlock,UfsPeimRequestSense,
UfsPeimInquiry,UfsRwAttributes,UfsClearFlag,UfsReadFlag
and UfsFindAvailableSlotInTmrl.
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
v2: Remove the comment that mentioned 'UfsPeimUnlinkMemBlock'
within function UfsPeimFreeMemPool().
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1093
Return Stack Buffer (RSB) is used to predict the target of RET
instructions. When the RSB underflows, some processors may fall back to
using branch predictors. This might impact software using the retpoline
mitigation strategy on those processors.
This commit will add RSB stuffing logic before returning from SMM (the RSM
instruction) to avoid interfering with non-SMM usage of the retpoline
technique.
After the stuffing, RSB entries will contain a trap like:
@SpecTrap:
pause
lfence
jmp @SpecTrap
A more detailed explanation of the purpose of commit is under the
'Branch target injection mitigation' section of the below link:
https://software.intel.com/security-software-guidance/insights/host-firmware-speculative-execution-side-channel-mitigation
Please note that this commit requires further actions (BZ 1091) to remove
the duplicated 'StuffRsb.inc' files and merge them into one under a
UefiCpuPkg package-level directory (such as UefiCpuPkg/Include/).
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1091
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1093
Return Stack Buffer (RSB) is used to predict the target of RET
instructions. When the RSB underflows, some processors may fall back to
using branch predictors. This might impact software using the retpoline
mitigation strategy on those processors.
This commit will add RSB stuffing logic before returning from SMM (the RSM
instruction) to avoid interfering with non-SMM usage of the retpoline
technique.
After the stuffing, RSB entries will contain a trap like:
@SpecTrap:
pause
lfence
jmp @SpecTrap
A more detailed explanation of the purpose of commit is under the
'Branch target injection mitigation' section of the below link:
https://software.intel.com/security-software-guidance/insights/host-firmware-speculative-execution-side-channel-mitigation
Please note that this commit requires further actions (BZ 1091) to remove
the duplicated 'StuffRsb.inc' files and merge them into one under a
UefiCpuPkg package-level directory (such as UefiCpuPkg/Include/).
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1091
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The issue was found when heap guard is turned on.
PrintLib somehow receives a non-null terminated string in var-arg.
When the PrintLib implementation reads the string it keeps
reading because no null-terminator is met, which triggers the page
fault set by the heap guard.
The issue is caused by a bug in FileBufferPrintLine().
When "edit" opens a binary file, in FileBufferPrintLine(),
the Line->Buffer may start with \x00 \x00, but the Line->Size is
larger than MainEditor.ScreenSize.Column, it causes the PrintLine is
set to an empty string by below call:
StrnCpyS (
PrintLine, BufLen/sizeof(CHAR16), Buffer,
MIN(Limit, MainEditor.ScreenSize.Column)
);
But since Limit (equals to Line->Size) is larger than
MainEditor.ScreenSize.Column, below for-loop doesn't successfully
set the whole PrintLine to all-empty-space.
for (; Limit < MainEditor.ScreenSize.Column; Limit++) {
PrintLine[Limit] = L' ';
}
So after the for-loop, PrintLine is still an empty string.
Later in below call, the PrintLine2 is created based on PrintLine.
ShellCopySearchAndReplace (
PrintLine, PrintLine2,
BufLen * 2, L"%", L"^%", FALSE, FALSE
);
But due to the implementation of ShellCopySearchAndReplace(),
PrintLine2 is untouched and INVALID_PARAMETER is returned.
Finally an uninitialized string is passed to ShellPrintEx()
which causes the #PF exception.
The fix is to reset Limit to StrLen(PrintLine) before for-loop.
So that PrintLine can be converted from an empty string to a
string containing all spaces.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jian Wang <jian.j.wang@intel.com>
Don't iterate over new dictionaries with one item
Create the data and then add to dictionary.
Note: if you diff ignoring whitespace changes you
can more easily see the relevant changes.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
MakeFile generation is once per module, so mark it as such.
also move the time stamp creation function inside as it's
only called from one place.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
1) Add a new file Common/caching.py
a. Allows for automated caching of repeated class functions, class
properties, and non-class functions
b. When called the first time the value is cached and if called a
second time, the cached result is called, not the function.
c. When used, this saves lots of memory since the actual function
pointers are replaced with smaller data elements.
d. note that not all features are used yet.
2) Fix AutoGen/GenMake and AutoGen/GetC to not call into private member
variables of ModuleAutoGen class
a. use the existing accessor properties for the data
3) Change AutoGen classes to remove a exception for duplicate members in
__new__ and use ?in? testing to speed up
4) Work on ModuleAutoGen class
a. Change all properties that use caching to use @caching_property
(see #1 above)
b. Change all properties that do not use caching to use standard python
decorator "@property"
c. Change all cases where a dictionary/set/list/object was created
and then immediately updated to use constructor parameters
d. Refactor each property function to remove the internal variable
that is no longer needed (this helps find items like #2 above)
e. Refactor _ApplyBuildRule with optional parameter to work around
circular dependency with BinaryFileList.
Note that 4e was almost certainly unintended as the functions were acting on
incomplete information since they were directly accessing private instance
variables at the same time another function on the stack was creating the same
private isntance data.
This overall changes behavior slightly, but makes the codebase smaller and
easier to read.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Per spec VOID* PCD max size should be a UINT16 value. so this patch
add the value check whether it is in range 0x0 .. 0xFFFF.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Allow the caller of the top-level makefile either to set EXTRA_LDFLAGS in
the environment or to pass EXTRA_LDFLAGS as a macro definition on the
command line. EXTRA_LDFLAGS extends (and potentially overrides) default
link-editing flags set in the makefiles.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1540244
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Allow the caller of the top-level makefile either to set EXTRA_OPTFLAGS in
the environment or to pass EXTRA_OPTFLAGS as a macro definition on the
command line. EXTRA_OPTFLAGS extends (and potentially overrides) default C
compilation flags set in the makefiles.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1540244
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The option "-O2" is not a preprocessor flag, but a code generation
(compilation) flag. Move it from BUILD_CPPFLAGS to BUILD_CFLAGS and
BUILD_CXXFLAGS.
Because "VfrCompile/GNUmakefile" uses "-O2" through BUILD_CPPFLAGS, and
because it doesn't use BUILD_CXXFLAGS, we have to introduce BUILD_OPTFLAGS
separately, so that "VfrCompile/GNUmakefile" can continue using just this
flag.
This patch doesn't change behavior.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1540244
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Option "-c" is a mode selection flag (choosing between compiling and
linking); it should not be in BUILD_CFLAGS, which applies only to
compiling anyway. The compilation rule for C source files, in
"footer.makefile", already includes "-c" -- currently we have double "-c"
options.
This patch doesn't change behavior.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1540244
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Replace the "old shell method" implementation in
ShellOpenFileByDevicePath() with EfiOpenFileByDevicePath() from UefiLib,
correcting the following issues:
- code duplication between this module and other modules,
- local variable name "EfiSimpleFileSystemProtocol" starting with "Efi"
prefix,
- bogus "FileHandle = NULL" assignments,
- leaking "Handle1" when the device path type/subtype check or the
realignment-motivated AllocateCopyPool() fails in the loop.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1008
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The ShellOpenFileByDevicePath() API promises to set the DeviceHandle
output parameter to the handle of the filesystem identified by the
FilePath input parameter. However, this doesn't actually happen when the
UEFI Shell 2.0 method is used (which is basically "always" nowadays).
Accordingly, the only caller of ShellOpenFileByDevicePath(), namely
ShellOpenFileByName(), defines a (dummy) local DeviceHandle variable just
so it can call ShellOpenFileByDevicePath().
Remove the useless output parameter.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1008
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Replace the OpenFileByDevicePath() function with EfiOpenFileByDevicePath()
from UefiLib, correcting the following issues:
- imprecise comments on OpenFileByDevicePath(),
- code duplication between this module and other modules,
- local variable name "EfiSimpleFileSystemProtocol" starting with "Efi"
prefix,
- bogus "FileHandle = NULL" assignments,
- leaking "Handle1" when the device path type/subtype check or the
realignment-motivated AllocateCopyPool() fails in the loop,
- stale SHELL_FILE_HANDLE reference in a comment.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Roman Bacik <roman.bacik@broadcom.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1008
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Replace the OpenFileByDevicePath() function with EfiOpenFileByDevicePath()
from UefiLib, correcting the following issues:
- imprecise comments on OpenFileByDevicePath(),
- code duplication between this module and other modules,
- local variable name "EfiSimpleFileSystemProtocol" starting with "Efi"
prefix,
- bogus "FileHandle = NULL" assignments,
- passing a potentially unaligned "FILEPATH_DEVICE_PATH.PathName" field to
a protocol member function (forbidden by the UEFI spec),
- leaking "Handle1" when the device path type/subtype check fails in the
loop,
- stale SHELL_FILE_HANDLE reference in a comment.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1008
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Replace the OpenFileByDevicePath() function with EfiOpenFileByDevicePath()
from UefiLib, correcting the following issues:
- imprecise comments on OpenFileByDevicePath(),
- code duplication between this module and other modules,
- local variable name "EfiSimpleFileSystemProtocol" starting with "Efi"
prefix,
- bogus "FileHandle = NULL" assignments,
- passing a potentially unaligned "FILEPATH_DEVICE_PATH.PathName" field to
a protocol member function (forbidden by the UEFI spec),
- leaking "Handle1" when the device path type/subtype check fails in the
loop,
- stale SHELL_FILE_HANDLE reference in a comment.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1008
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1080
Per Shell spec 2.2 chapter 3.4.4.2, Unicode file tag should be
inserted in the output from the input redirected variable, to ensure
it looks like a UCS-2 encode file.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
When "<a" is used to redirect ASCII file to an application, Shell
core reads the ASCII file and converts the ASCII to Unicode as the
input source of the application.
But per Shell spec, the input source should have \xFEFF to indicate
it's a Unicode stream.
The patch adds the missing \xFEFF.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
1) currently a couple classes use m instead of self (including some mixed
functions that should have previously failed).
2) deleted some blank lines.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
We met a case on GCC toolchain for increment build. the case is user
build Helloworld first, then rename the source file Helloworld.c to
Helloworld_new.c and also update the file name to Helloworld_new.c in
.inf file's [sources] section. finally, he rebuild it again.
It cause build failure due to multiple definition of `UefiMain' because
in the .lib file it both have Helloworld.obj and Helloworld_new.obj.
current we use the option 'cr' to create the .lib file while the 'r'
cmd means replace existing or insert new files into the archive. so
in this patch before we create the .lib file, we delete it first.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V2: Add back "from Common.DataType import *"
1. Remove some import statement that are not used.
2. Remove the Type value in the LibraryClassObject because we don't
actually use it.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Commit b22a62be5c
* IntelFrameworkModule/LegacyBios:Use reserved memory for legacy data
allocates reserved memory for holding legacy code/data.
But with PcdDxeNxMemoryProtectionPolicy set to certain value to
forbid execution when code is in certain type of memory, it's
possible that a platform forbids execution when code is in reserved
memory. The patch calls GCD service to allow such case otherwise
CPU exception may occur.
Code execution in BSCode area should be enabled by platform by
default.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jian Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=777
Per Shell spec, the environment variable has a case-sensitive name.
But today's implementation of EfiShellSetEnv() compares the
environment variable name case insensitively, which causes variable
like "CWD" cannot be set due to "cwd" is pre-defined variable.
The patch fixes this issue.
The EfiShellGetEnv() doesn't have such issue because it will
call into ShellFindEnvVarInList() which uses StrCmp().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jim Dailey <jim_dailey@dell.com>
1. Complete the full path for import statement. Use "EccMain" to
replace "Ecc" for the absolute path support.
2. Fix some issues on configuration file.
3. Fix an issue of RaiseError not working in EdkLogger.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
after analysis the BuildOptionValue function, we found the if statement
IsFieldValueAnArray is redundant because ValueExpressionEx will handle
it.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1082
Current code only returns actual data length in case of return status
buffer too small.
If caller provided a buffer that's large enough to restore data from
lock box, actual data length is not returned. It needs to be updated
in case of return status as success as well.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Anbazhagan Baraneedharan <anbazhagan@hp.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
V1 changes:
> Current code logic can't confirm CpuS3DataDxe driver start before
> CpuFeaturesDxe driver. So the assumption in CpuFeaturesDxe not valid.
> Add implementation for AllocateAcpiCpuData function to remove this
> assumption.
V2 changes:
> Because CpuS3Data memory will be copy to smram at SmmReadToLock point,
> so the memory type no need to be ACPI NVS type, also the address not
> limit to below 4G.
> This change remove the limit of ACPI NVS memory type and below 4G.
V3 changes:
> Remove function definition in header file.
> Add STATIC in function implementation.
Pass OS boot and resume from S3 test.
Bugz: https://bugzilla.tianocore.org/show_bug.cgi?id=959
Reported-by: Marvin Häuser <Marvin.Haeuser@outlook.com>
Suggested-by: Fan Jeff <vanjeff_919@hotmail.com>
Cc: Marvin Häuser <Marvin.Haeuser@outlook.com>
Cc: Fan Jeff <vanjeff_919@hotmail.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Because PrepareApStartupVector() stores StackAddress to
"mExchangeInfo->StackStart" (which has type (VOID*)), and because
"UefiCpuPkg/PiSmmCpuDxeSmm/X64/MpFuncs.nasm" reads the latter with:
add edi, StackStartAddressLocation
add rax, qword [edi]
mov rsp, rax
mov qword [edi], rax
in long-mode code. So code can remove below 4G limitation.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Because CpuS3Data memory will be copy to smram at SmmReadyToLock point,
the memory type no need to be ACPI NVS type, also the address not
limit to below 4G.
This change remove the limit of ACPI NVS memory type and below 4G.
Pass OS boot and resume from S3 test.
Cc: Marvin Häuser <Marvin.Haeuser@outlook.com>
Cc: Fan Jeff <vanjeff_919@hotmail.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
ACPI_CPU_DATA structure first introduced to save data in
normal boot phase. Also this data will be used in S3 phase
by one PEI driver. So in first phase, this data is been
defined to use ACPI NVS memory type and must below 4G.
Later in order to fix potential security issue,
PiSmmCpuDxeSmm driver added logic to copy ACPI_CPU_DATA
(except ResetVector and Stack buffer) to smram at smm
ready to lock point. ResetVector must below 1M and Stack
buffer is write only in S3 phase, so these two fields not
copy to smram. Also PiSmmCpuDxeSmm driver owned the task
to restore the CPU setting and it's a SMM driver.
After above change, the acpi nvs memory type and below 4G
limitation is no longer needed.
This change remove the limitation in the comments for
ACPI_CPU_DATA definition.
Cc: Marvin Häuser <Marvin.Haeuser@outlook.com>
Cc: Fan Jeff <vanjeff_919@hotmail.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Current implementation will copy GDT/IDT at SmmReadyToLock point
from ACPI NVS memory to Smram. Later at S3 resume phase, it restore
the memory saved in Smram to ACPI NVS. It can directly use GDT/IDT
saved in Smram instead of restore the original ACPI NVS memory.
This patch do this change.
Test Done:
Do the OS boot and S3 resume test.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
the call statement of _CheckDuplicateInFV() was commented out
in 2014. There is no call statement of _CheckDuplicateInFV(),
so remove it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When packing HiiPcd into PcdNvStoreDefaultValueBuffer,
The boolean type pcd value packing incorrect.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Kelly Steele <kelly.steele@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Kelly Steele <kelly.steele@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Kelly Steele <kelly.steele@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Kelly Steele <kelly.steele@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Prince Agyeman <prince.agyeman@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Ma, Maurice <maurice.ma@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Prince Agyeman <prince.agyeman@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Ma, Maurice <maurice.ma@intel.com>
Merge [Sources.Ia32, Sources.X64] to [Sources] after removing IPF. Also
change other similar parts in this file.
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Use GenerateCapsule to generate capsules for MinnowMax
debug and release builds and sample devices.
Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Guo Mang <mang.guo@intel.com>
This patch adds maintainers for the FmpDevicePkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Current code locks variables in PcdFmpDeviceLockEventGuid callback by
VariableLock protocol whose interface will be closed at EndOfDxe.
So the PcdFmpDeviceLockEventGuid callback needs be executed before
the EndOfDxe callback in Variable driver.
When PcdFmpDeviceLockEventGuid = gEfiEndOfDxeEventGroupGuid, the
callback's execution sequence depends on the callback's TPL and
registration sequence.
When PcdFmpDeviceLockEventGuid = gEfiEventReadyToBootGuid, the
PcdFmpDeviceLockEventGuid callback will be executed after the
EndOfDxe callback in Variable driver, the locking will fail.
The patch moves the variables locking logic to entrypoint.
The patch also moves the IsLockFmpDeviceAtLockEventGuidRequired ()
checking to entrypoint.
The entrypoint's final return status should be better to depend on
the return status of RegisterFmpInstaller/InstallFmpInstance, but not
gBS->CreateEventEx.
So the patch also moves the RegisterFmpInstaller/InstallFmpInstance
calling to the end of entrypoint.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Current code just creates ESRT entry in FMP notification
and installs ESRT configuration table in ReadyToBoot event.
The LastAttemptVersion and LastAttemptStatus in ESRT will
be out of date after system continues to boot without reset
after capsule update (reset is not required or capsule update
is failed).
This patches updates the code to create ESRT based on all
FMP instances in ReadyToBoot event.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
No need repopulate if SetImage is not called.
But need repopulate after SetImage is called to update
LastAttemptVersion and LastAttemptStatus
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
For non-root folder, such as "X:\test", the EDK_TOOLS_PATH will
resolve to "X:\test\edk2\BaseTools". This is OK.
But if WORKSPACE is at a root folder, such as "X:\", the EDK_TOOLS_PATH
will look like "X:\\BaseTools". The *double backslash* can fail the command
like "del" and thus affect the %ERRORLEVEL% variable, which may break
subsequent build processing.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The DXE Core is one of those modules that call
ProcessLibraryConstructorList() manually.
Before DxeMain() [MdeModulePkg/Core/Dxe/DxeMain/DxeMain.c] calls
ProcessLibraryConstructorList(), and through it, our
PlatformDebugLibIoPortConstructor() function, DxeMain() invokes the
DEBUG() macro multiple times. That macro lands in our
PlatformDebugLibIoPortFound() function -- which currently relies on the
"mDebugIoPortFound" global variable that has (not yet) been set by the
constructor. As a result, early debug messages from the DXE Core are lost.
Move the device detection into PlatformDebugLibIoPortFound(), also caching
the fact (not just the result) of the device detection.
(We could introduce a separate DebugLib instance just for the DXE Core,
but the above approach works for all modules that currently consume the
PlatformDebugLibIoPort instance (which means "everything but SEC").)
This restores messages such as:
> CoreInitializeMemoryServices:
> BaseAddress - 0x7AF21000 Length - 0x3CDE000 MinimalMemorySizeNeeded - 0x10F4000
Keep the empty constructor function -- OVMF's DebugLib instances have
always had constructors; we had better not upset constructor dependency
ordering by making our instance(s) constructor-less.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: c09d957130
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: sanitize blank lines around "mDebugIoPortChecked"]
DxeSmmPerformanceLib previously is used by DP tool.
But in new pweformance infrastructure, we have updated
Dp tool to get the performance data from firmware
performance data table in ACPI.
Now the DxeSmmPerformanceLib is not used by
any module. So remove it from edk2 code base to
avoid being used by mistake.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
DxeSmmPerformanceLib previously is used by DP tool.
But in new pweformance infrastructure, we have updated
Dp tool to get the performance data from firmware
performance data table in ACPI.
So remove the usage of DxeSmmPerformanceLib here.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
DxeSmmPerformanceLib previously is used by DP tool.
But in new pweformance infrastructure, we have updated
Dp tool to get the performance data from firmware
performance data table in ACPI.
So remove the usage of DxeSmmPerformanceLib here.
Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>
DxeSmmPerformanceLib previously is used by DP tool.
But in new pweformance infrastructure, we have updated
Dp tool to get the performance data from firmware
performance data table in ACPI.
So remove the usage of DxeSmmPerformanceLib here.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Kelly Steele <kelly.steele@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This commit adds an addtional check in AsciiStriCmp. It
explicitly checks the end of the sting pointed by 'SecondString' to make
the code logic easier for reading and to prevent possible mis-reports by
static code checkers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <Hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1073
Add PCD statement include files for the PKCS7 test key.
* gEfiSecurityPkgTokenSpaceGuid.PcdPkcs7CertBuffer
* gFmpDevicePkgTokenSpaceGuid.PcdFmpDevicePkcs7CertBufferXdr
These include files can be used in !include statements in PCD
sections of a platform DSC file to assign these PCDs to the
test key certificate values.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
According to the SBSA specification the Watchdog Compare
Register is split into two separate 32bit registers.
EDK2 code uses a single 64bit transaction to update
them, which can be problematic, depending on the SoC
implementation and could result in unpredictable behavior.
Fix this by modifying WatchdogWriteCompareRegister routine to
use two consecutive 32bit writes to the Watchdog Compare Register
Low and High, using new dedicated macros.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In DSC, we can define the driver with the different FILE GUID. So this
driver name and its FILE GUID should also be listed in Build output
Guid.xref. But now, Guid.xref still lists the driver MODULE_GUID.
The case in Platform.dsc:
MdeModulePkg/Universal/DriverSampleDxe/DriverSampleDxe.inf {
<Defines>
FILE_GUID = 3A4A354F-6935-40fa-B19C-500EEEBF0BC2
<LibraryClasses>
PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
}
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
*v2: Optimize the patch by calculating AsciiStrSize() only once.
In URI, the colon (:) is used to terminate the HostName path before
a port number. However, if HostName is expressed as IPv6 format, colon
characters in IPv6 addresses will conflict with the colon before port
number. To alleviate this conflict in URI, the IPv6 expressed HostName
are enclosed in square brackets ([]). To record the real IPv6 HostName,
square brackets should be stripped.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Some static tool reports "the condition in 'if' statement is constant".
This patch updates the code to use local variable to store test key
digest size. It can pass the static tool's check.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Some static tool reports "DeviceLibLowestSupportedVersion" is used,
but is uninitialized. It is false positive reporting based because
DeviceLibLowestSupportedVersion will have assigned value after
FmpDeviceGetLowestSupportedVersion() returns SUCCESS.
This patch updates the code to initialize
DeviceLibLowestSupportedVersion
to DEFAULT_LOWESTSUPPORTEDVERSION before calling
FmpDeviceGetLowestSupportedVersion().
It can pass the static tool's check.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Instead of EFI_ACCESS_DENIED which is not defined in retval by
UEFI spec, return UNSUPPORTED if device has been locked in
SetTheImage().
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
It does not make sense to check the Image/ImageSize if ImageIndex
has been invalid.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
FmpDxe does not consume DisplayUpdateProgressLib, so remove the
mapping in FmpDevicePkg.dsc.
Also rename the ESRT GUIDs.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Add DISABLE_NEW_DEPRECATED_INTERFACES build options to make sure
no deprecated interface used in this package.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Current code return 1 when LSV check is not required,
but 1 LSV will make 0 Version capsule image update failed.
0 LSV is valid, this patch updates the code to return 0 when
LSV check is not required
We can see even the DEFAULT_LOWESTSUPPORTEDVERSION is 0.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=922
Based on content from the following branch:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport/MsCapsuleUpdatePkg
The FmpDxe directory contains 2 INF files. FmpDxe.inf
is a DXE driver that is used in a platform to add a
Firmware Management Protocol for firmware device that
supports firmware updates.
FmpDxeLib.inf is a NULL library instance with the exact
same functionality as FmpDxe.inf, but allows the the
Firmware Management Protocol feature to be added to
an existing device driver.
The FmpDxe component is intended to be used "as is"
with no need for any device specific or platform specific
changes.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=922
Based on content from the following branch:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport/MsCapsuleUpdatePkg
Add library instances for FmpDeviceLib, CapsuleUpdatePolicyLib,
and FmpPayloadHeaderLib.
Library Classes
===============
* FmpDeviceLibNull - Non-functional template of the FmpDeviceLib
that can be used as a starting point for an FmpDeviceLib for
a specific firmware storage device.
* CapsuleUpdatePolicyLibNull - Functional template of the
CapsuleUpdatePolicyLib that can be used as a starting point
of a platform specific implementation.
* FmpPayloadHeaderLibV1 - Version 1 of the FmpPayloadHeaderLib.
This library is indented to be used "as is" with no need for
any device specific or platform specific changes.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=922
Based on content from the following branch:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport/MsCapsuleUpdatePkg
Create FmpDevicePkg with library classes and PCDs used to
customize the behavior of a Firmware Management Protocol
instance.
Library Classes
===============
* FmpDeviceLib - Provides firmware device specific services
to support updates of a firmware image stored in a firmware
device.
* CapsuleUpdatePolicyLib - Provides platform policy services
used during a capsule update.
* FmpPayloadHeaderLib - Provides services to retrieve values
from a capsule's FMP Payload Header. The structure is not
included in the library class. Instead, services are
provided to retrieve information from the FMP Payload Header.
If information is added to the FMP Payload Header, then new
services may be added to this library class to retrieve the
new information.
PCDs set per module
====================
* PcdFmpDeviceSystemResetRequired - Indicates if a full
system reset is required before a firmware update to a
firmware devices takes effect
* PcdFmpDeviceTestKeySha256Digest - The SHA-256 hash of a
PKCS7 test key that is used to detect if a test key is
being used to authenticate capsules. Test key detection
is disabled by setting the value to {0}.
* PcdFmpDeviceProgressColor - The color of the progress bar
during a firmware update.
* PcdFmpDeviceImageIdName - The Null-terminated Unicode
string used to fill in the ImageIdName field of the
EFI_FIRMWARE_IMAGE_DESCRIPTOR structure that is returned
by the GetImageInfo() service of the Firmware Management
Protocol for the firmware device.
* PcdFmpDeviceBuildTimeLowestSupportedVersion - The build
time value used to fill in the LowestSupportedVersion field
of the EFI_FIRMWARE_IMAGE_DESCRIPTOR structure that is
returned by the GetImageInfo() service of the Firmware
Management Protocol.
* PcdFmpDeviceProgressWatchdogTimeInSeconds - The time in
seconds to arm a watchdog timer during the update of a
firmware device.
PCDs set per module or for entire platform
==========================================
* PcdFmpDevicePkcs7CertBufferXdr - One or more PKCS7
certificates used to verify a firmware device capsule
update image.
* PcdFmpDeviceLockEventGuid - An event GUID that locks
the firmware device when the event is signaled.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=945
Based on content from the following branch
https://github.com/Microsoft/MS_UEFI/tree/share/beta/CapsuleTools
* Convert C tools to Python
* Add common python modules to:
BaseTools/Source/Python/Common/Uefi/Capsule
BaseTools/Source/Python/Common/Edk2/Capsule
* Add GenerateCapsule.py to BaseTools/Source/Python/Capsule
* Add Windows and Posix wrappers for GenerateCapsule.py
usage: GenerateCapsule [-h] [-o OUTPUTFILE] (-e | -d | --dump-info)
[--capflag {PersistAcrossReset,PopulateSystemTable,InitiateReset}]
[--capoemflag CAPSULEOEMFLAG] [--guid GUID]
[--hardware-instance HARDWAREINSTANCE]
[--monotonic-count MONOTONICCOUNT]
[--fw-version FWVERSION] [--lsv LOWESTSUPPORTEDVERSION]
[--pfx-file SIGNTOOLPFXFILE]
[--signer-private-cert OPENSSLSIGNERPRIVATECERTFILE]
[--other-public-cert OPENSSLOTHERPUBLICCERTFILE]
[--trusted-public-cert OPENSSLTRUSTEDPUBLICCERTFILE]
[--signing-tool-path SIGNINGTOOLPATH] [--version] [-v]
[-q] [--debug [0-9]]
InputFile
Generate a capsule. Copyright (c) 2018, Intel Corporation. All rights
reserved.
positional arguments:
InputFile Input binary payload filename.
optional arguments:
-h, --help show this help message and exit
-o OUTPUTFILE, --output OUTPUTFILE
Output filename.
-e, --encode Encode file
-d, --decode Decode file
--dump-info Display FMP Payload Header information
--capflag {PersistAcrossReset,PopulateSystemTable,InitiateReset}
Capsule flag can be PersistAcrossReset, or
PopulateSystemTable or InitiateReset or not set
--capoemflag CAPSULEOEMFLAG
Capsule OEM Flag is an integer between 0x0000 and
0xffff.
--guid GUID The FMP/ESRT GUID in registry format. Required for
encode operations.
--hardware-instance HARDWAREINSTANCE
The 64-bit hardware instance. The default is
0x0000000000000000
--monotonic-count MONOTONICCOUNT
64-bit monotonic count value in header. Default is
0x0000000000000000.
--fw-version FWVERSION
The 32-bit version of the binary payload (e.g.
0x11223344 or 5678).
--lsv LOWESTSUPPORTEDVERSION
The 32-bit lowest supported version of the binary
payload (e.g. 0x11223344 or 5678).
--pfx-file SIGNTOOLPFXFILE
signtool PFX certificate filename.
--signer-private-cert OPENSSLSIGNERPRIVATECERTFILE
OpenSSL signer private certificate filename.
--other-public-cert OPENSSLOTHERPUBLICCERTFILE
OpenSSL other public certificate filename.
--trusted-public-cert OPENSSLTRUSTEDPUBLICCERTFILE
OpenSSL trusted public certificate filename.
--signing-tool-path SIGNINGTOOLPATH
Path to signtool or OpenSSL tool. Optional if path to
tools are already in PATH.
--version show program's version number and exit
-v, --verbose Turn on verbose output with informational messages
printed, including capsule headers and warning
messages.
-q, --quiet Disable all messages except fatal errors.
--debug [0-9] Set debug level
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
This is initial version of OP-TEE library that provides api's to
communicate with OP-TEE OS (Trusted OS based on ARM TrustZone) via
secure monitor calls. Currently it provides basic api to detect OP-TEE
presence via UID matching.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Current DxeCapsuleLibFmp always do reset for FMP capsule.
Actually, the code should use Attributes from FMP descriptor to know
whether reset is required or not.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Within function GetUefiMemoryAttributesTable(), add a check to avoid
possible null pointer dereference.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Within function SmmMemLibInternalGetUefiMemoryAttributesTable(), add a
check to avoid possible null pointer dereference.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Error is caused by SHA384/SHA512 hash lib change in.
Cc: Bi Dandan <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhang, Chao B <chao.b.zhang@intel.com>
Reviewed-by: Bi Dandan <dandan.bi@intel.com>
Add SHA384, 512 Hash lib support. Now only CryptoPkg support PEI/DXE
version.
Cc: Long Qin <qin.long@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhang Chao B <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
The build failure is like below.
xxx\CapsuleApp.c(868) : error C2275: 'EFI_GUID' :
illegal use of this type as an expression
xxx/UefiBaseType.h(29) : see declaration of 'EFI_GUID'
xxx\CapsuleApp.c(868) : error C2146: syntax error :
missing ';' before identifier 'ImageTypeId'
xxx\CapsuleApp.c(868) : error C2065: 'ImageTypeId' : undeclared identifier
xxx\CapsuleApp.c(869) : error C2275: 'UINTN' :
illegal use of this type as an expression
xxx\ProcessorBind.h(224) : see declaration of 'UINTN'
xxx\CapsuleApp.c(869) : error C2146: syntax error :
missing ';' before identifier 'ImageIndex'
xxx\CapsuleApp.c(869) : error C2065: 'ImageIndex' : undeclared identifier
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
The code to check FmpImageSize again OFFSET_OF
(EFI_FIRMWARE_MANAGEMENT_CAPSULE_IMAGE_HEADER, UpdateHardwareInstance)
can be refined to check against FmpImageHeaderSize.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Commit d1de487dd2
"MdeModulePkg/BdsDxe: fall back to a Boot Manager Menu loop before
hanging"
changed BDS core to fall back to UI loop when no bootable option
can be launched.
Now since PlatformBootManagerUnableToBoot() is added, the commit
can be reverted.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The patch adds a new API PlatformBootManagerUnableToBoot()
to PlatformBootManagerLib.
The new API is provided by platform bds library and is called when
no boot option could be launched.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
When cleaning the PciIoDevice, also free the BusNumberRange
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
FvSimpleFileSystem on read always allocates a FileBuffer, and never frees
it. This causes memory leaks. It is especially bad for reading scripts
line-by-line. In some cases memory leak can exceed 1GB.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Vladimir Olovyannikiov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
We want to provide precise info in MemAttribTable
to both OS and SMM, and SMM only gets the info at EndOfDxe.
So we do not update RtCode entry in EndOfDxe.
The impact is that if 3rd part OPROM is runtime, it cannot be executed
at UEFI runtime phase.
Currently, we do not see compatibility issue, because the only runtime
OPROM we found before in UNDI, and UEFI OS will not use UNDI interface
in OS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
It treats the UEFI runtime page with EFI_MEMORY_RO attribute as
invalid SMM communication buffer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
It treats the UEFI runtime page with EFI_MEMORY_RO attribute as
invalid SMM communication buffer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
So that the SMM can consume it to set page protection for
the UEFI runtime page with EFI_MEMORY_RO attribute.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
It treats GCD untested memory as invalid SMM
communication buffer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
It treats GCD untested memory as invalid SMM
communication buffer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Base on UEFI spec requirement, StartAllAPs function should not use the APs which has been disabled before. This patch just change current code to follow this rule.
V3 changes:
Only called by StartUpAllAps, WakeUpAp will not wake up the disabled APs, in other cases also need to include the disabled APs, such as CpuDxe driver start up and ChangeApLoopCallback function.
WakeUpAP() is called with (Broadcast && WakeUpDisabledAps) from MpInitLibInitialize(), CollectProcessorCount() and MpInitChangeApLoopCallback() only. The first two run before the PPI or Protocol user has a chance to disable any APs. The last one runs in response to the ExitBootServices and LegacyBoot events, after which the MP protocol is unusable. For this reason, it doesn't matter that an originally disabled AP's state is not restored to Disabled, when
WakeUpAP() is called with (Broadcast && WakeUpDisabledAps).
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
The patch includes below changes:
(1) It removes "volatile" from RunningCount, because only the BSP modifies it.
(2) When we detect a timeout in CheckAllAPs(), and collect the list of failed CPUs, the size of the list is derived from the following difference, before the patch:
StartCount - FinishedCount
where "StartCount" is set by the BSP at startup, and FinishedCount is incremented by the APs themselves.
Here the patch replaces this difference with
StartCount - RunningCount
that is, the difference is no more calculated from the BSP's startup counter and the AP's shared finish counter, but from the RunningCount measurement that the BSP does itself, in CheckAllAPs().
(3) Finally, the patch changes the meaning of RunningCount. Before the patch, we have:
- StartCount: the number of APs the BSP stars up,
- RunningCount: the number of finished APs that the BSP collected
After the patch, StartCount is removed, and RunningCount is *redefined* as the following difference:
OLD_StartCount - OLD_RunningCount
Giving the number of APs that the BSP started up but hasn't collected yet.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Current CPU state definition include CpuStateIdle and CpuStateFinished.
After investigation, current code can use CpuStateIdle to replace the
CpuStateFinished. It will reduce the state number and easy for maintenance.
> Before this patch, the state transitions for an AP are:
>
> Idle ----> Ready ----> Busy ----> Finished ----> Idle
> [BSP] [AP] [AP] [BSP]
>
> After the patch, the state transitions for an AP are:
>
> Idle ----> Ready ----> Busy ----> Idle
> [BSP] [AP] [AP]
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Currently DP tool will cumulate the performance data for
Driver Binding Support/Start, will count the number they
appears, and record the maximum/minimum time value...
Now add Driver Binding Stop performance data to the
cumulative data to keep consistency.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
1. Add a checkpoint to check NO TABs.
2. Add a checkpoint to check line ending with CRLF.
3. Add a checkpoint to check no trailing spaces.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
This patch adds UefiShellAcpiViewCommandLib INF file into
[Components] section of ShellPkg.dsc so this library can be built
in ShellPkg level build.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Here is this script usage.
1. Build one platform.
2. Use FCE tool to read HII config from the generated FD image.
FCE read -i Platform.fd > Config.txt
3. Call the script to generate StructurePcd setting.
ConvertFceToStructurePcd.py -p Build\PlatformPkg\DEBUG_VS2015x86 \
-c Config.txt -o OutputDir
OutputDir directory has StructurePcd.dec, StructurePcd.dsc, StructurePcd.inf.
4. Refer to wiki https://github.com/lgao4/edk2/wiki/StructurePcd-Enable-Steps
to enable structure pcd in this platform.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
This variable is only used in one function, make it local there.
Also when iterating on the variable, use dict.items() to get value
instead of re-looking up the value multiple times.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
The class name for the "PeiResourcePublicationLib" instance is just
"ResourcePublicationLib", not "PeiResourcePublicationLib". However, no
module included in the ArmVirtPkg platforms depends on this lib class;
remove its resolution.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
ResourcePublicationLib class name is ResourcePublicationLib.
INF and DSC files are updated to use the correct one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Dongao Guo <dongao.guo@intel.com>
[lersek@redhat.com: insert empty line between commit msg body and tags]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
If the different token with the same PCD names are used in the driver,
build can pass. If the different token with the same PCD name are used
in the different library, then the driver build will fail. The reason
is that the driver autogen.c is not generated correctly for the second
case. BaseTools should check the duplicated PCD name is the driver and
its linked libraries.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
current if user use PatchPcdSetPtr in library, it will report the
_PCD_PATCHABLE_TokenName_SIZE is not defined.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Currently, the SecPlatformInformation2 PPI is installed when either
there is none present or the present one doesn't lack data.
Update the logic to only install the SecPlatformInformation2 PPI when
it's not already installed so that an up-to-date PPI remains the only
one and unchanged.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
This patch corrects the Module Type Header file for Management Mode(MM)
as specified in PI v1.6 Specification. Also, it updates parameter for
auto generated template functions from EFI_SMM_SYSTEM_TABLE2 to
EFI_MM_SYSTEM_TABLE.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
According to UEFI spec, only bits 0-15 of CapsuleFlags are
meaningful and CapsuleGuid specific, CAPSULE_FLAGS_PERSIST_ACROSS_RESET
CAPSULE_FLAGS_POPULATE_SYSTEM_TABLE/CAPSULE_FLAGS_INITIATE_RESET
defined in UEFI spec are in bits 16-31, they should not be parsed in
CapsuleFlags of ESRT.
CapsuleFlags
The capsule flags field contains the CapsuleGuid flags (bits 0-15)
as defined in the EFI_CAPSULE_HEADER that will be set in the capsule
header.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
V3: Add some invalid type and datum check
V2: limit the PCD used in the [Depex] section should be used in the module
The PCD item used in INF [Depex] section must be defined as FixedAtBuild
type and VOID* datum type, and the size of the PCD must be 16 bytes.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=443
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
This patch adds a simple CPU driver that exports the
EFI_MM_CONFIGURATION_PROTOCOL to allow registration of the Standalone
MM Foundation entry point. It preserves the existing notification
mechanism for the configuration protocol.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
The Standalone MM environment runs in S-EL0 in AArch64 on ARM Standard
Platforms and is initialised during the SEC phase. ARM Trusted firmware
in EL3 is responsible for initialising the architectural context for
S-EL0 and loading the Standalone MM image. The memory allocated to this
image is marked as RO+X. Heap memory is marked as RW+XN.
Certain actions have to be completed prior to executing the generic code
in the Standalone MM Core module. These are:
1. Memory permission attributes for each section of the Standalone MM
Core module need to be changed prior to accessing any RW data.
2. A Hob list has to be created with information that allows the MM
environment to initialise and dispatch drivers.
Furthermore, this module is responsible for handing over runtime MM
events to the Standalone MM CPU driver and returning control to ARM
Trusted Firmware upon event completion. Hence it needs to know the CPU
driver entry point.
This patch implements an entry point module that ARM Trusted Firmware
jumps to in S-EL0. It then performs the above actions before calling the
Standalone MM Foundation entry point and handling subsequent MM events.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Management Mode (MM) is a generic term used to describe a secure
execution environment provided by the CPU and related silicon that is
entered when the CPU detects a MMI. For x86 systems, this can be
implemented with System Management Mode (SMM). For ARM systems, this can
be implemented with TrustZone (TZ).
A MMI can be a CPU instruction or interrupt. Upon detection of a MMI, a
CPU will jump to the MM Entry Point and save some portion of its state
(the "save state") such that execution can be resumed.
The MMI can be generated synchronously by software or asynchronously by
a hardware event. Each MMI source can be detected, cleared and disabled.
Some systems provide for special memory (Management Mode RAM or MMRAM)
which is set aside for software running in MM. Usually the MMRAM is
hidden during normal CPU execution, but this is not required. Usually,
after MMRAM is hidden it cannot be exposed until the next system reset.
The MM Core Interface Specification describes three pieces of the PI
Management Mode architecture:
1. MM Dispatch
During DXE, the DXE Foundation works with the MM Foundation to
schedule MM drivers for execution in the discovered firmware volumes.
2. MM Initialization
MM related code opens MMRAM, creates the MMRAM memory map, and
launches the MM Foundation, which provides the necessary services to
launch MM-related drivers. Then, sometime before boot, MMRAM is
closed and locked. This piece may be completed during the
SEC, PEI or DXE phases.
3. MMI Management
When an MMI generated, the MM environment is created and then the MMI
sources are detected and MMI handlers called.
This patch implements the MM Core.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The Standalone MM environment is initialized during the SEC phase on ARM
Standard Platforms. The MM Core driver implements an entry point module
which is architecture specific and runs prior to the generic core driver
code. The former creates a Hob list that the latter consumes. This
happens in the same phase.
This patch implements a Hob library that can be used by the entry point
module to produce a Hob list and by the core driver code to consume it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
MM memory check library library implementation. This library consumes
MM_ACCESS_PROTOCOL to get MMRAM information. In order to use this
library instance, the platform should produce all MMRAM range via
MM_ACCESS_PROTOCOL, including the range for firmware (like MM Core
and MM driver) and/or specific dedicated hardware.
This patch provides services for MM Memory Operation.
The management mode Mem Library provides function for checking if buffer
is outside MMRAM and valid. It also provides functions for copy data
from MMRAM to non-MMRAM, from non-MMRAM to MMRAM,
from non-MMRAM to non-MMRAM, or set data in non-MMRAM.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
This patch implements a firmware volume library that can be used by the
Standalone management mode core module to parse the firmware volume.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
This patch deletes "StandaloneMmPkg" which was created as a file
intially. This patch enables creation of "StandaloneMmPkg" as a folder.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Current IsInSmm() method makes use of gEfiSmmBase2ProtocolGuid.InSmm() to
check if current processor is in SMM mode or not. But this is not correct
because gEfiSmmBase2ProtocolGuid.InSmm() can only detect if the caller is
running in SMRAM or from SMM driver. It cannot guarantee if the caller is
running in SMM mode. Because SMM mode will load its own page table, adding
an extra check of saved DXE page table base address against current CR3
register value can help to get the correct answer for sure (in SMM mode or
not in SMM mode).
There's indiscriminate uses of Context.X64 and Context.Ia32 in code which
is not a good coding practice and will cause potential issue. In addition,
the related structure type definition is not packed and has also potential
issue. This will not be covered by this patch but be tracked by a bug below.
https://bugzilla.tianocore.org/show_bug.cgi?id=1039
This is an issue caused by check-in at
2a1408d1d7
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Current function has low performance because it calls GetApicId
in the loop, so it maybe called more than once.
New logic call GetApicId once and base on this value to search
the processor.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jeff Fan <vanjeff_919@hotmail.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
None of the source files referenced by "AcpiPlatformDxe.inf" #include
"MdePkg/Include/Library/DxeServicesLib.h" or use interfaces declared
therein, so drop DxeServicesLib from [LibraryClasses].
"AcpiPlatformDxe.inf" references "AcpiPlatform.c", which installs ACPI
tables built into the firmware image from under "OvmfPkg/AcpiTables/", in
case dynamically generated ACPI tables are not available from Xen or QEMU.
For this, the driver consumes gEfiFirmwareVolume2ProtocolGuid. Account for
that in [Protocols].
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reported-by: Steven Shi <steven.shi@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1014
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
When resume from S3 and CPU loop mode is MWait mode,
if driver calls APs to do task at EndOfPei point, the
APs can't been wake up and bios hang at that point.
The root cause is PiSmmCpuDxeSmm driver wakes up APs
with HLT mode during S3 resume phase to do SMM relocation.
After this task, PiSmmCpuDxeSmm driver not restore APs
context which make CpuMpPei driver saved wake up buffer
not works.
The solution for this issue is let CpuMpPei driver hook
S3SmmInitDone ppi notification. In this notify function,
it check whether Cpu Loop mode is not HLT mode. If yes,
CpuMpPei driver will set a flag to force BSP use INIT-SIPI
-SIPI command to wake up the APs.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Search uCode costs much time, if AP has same processor type
with BSP, AP can use BSP saved uCode info to get better performance.
This change enables this solution.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Read uCode from memory has better performance than from flash.
But it needs extra effort to let BSP copy uCode from flash to
memory. Also BSP already enable cache in SEC phase, so it use
less time to relocate uCode from flash to memory. After
verification, if system has more than one processor, it will
reduce some time if load uCode from memory.
This change enable this optimization.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The case is the Pcd item both used in 1 module inf and 1 lib inf, and
in the DSC component section, it override the Pcd value.
In the module, the pcd value is the override value, but in the lib inf
the pcd value is the value that in the DSC PCD section's value, then it
cause the Pcd value is different in the module and lib. but actually we
only need use the Pcd value in the module to decide whether it use the
same value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Since Ecc.py import modules from its own directory, add "-m" to the
python parameters so that they can import its own modules after adopting
absolute import.
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Since BPDG.py import modules from its own directory, add "-m" to the
python parameters so that they can import its own modules after adopting
absolute import.
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Move "ImageBinDict" from GenFds.py to GenFdsGlobalVariable.py so that we
can remove the requirement to import GenFds.GenFds in Capsule.py, Fd.py and
Fv.py. This breaks the following circular imports:
* GenFds.FdfParser => GenFds.Capsule => GenFds.GenFds => GenFds.FdfParser
* GenFds.FdfParser => GenFds.Fd => GenFds.GenFds => GenFds.FdfParser
* GenFds.FdfParser => GenFds.Fd => GenFds.Fv => GenFds.GenFds =>
GenFds.FdfParser
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Since GenFds.py import modules from its own directory, add "-m" to the
python parameters so that they can import its own modules after adopting
absolute import.
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Add the IPv6 stack to ArmVirtQemu with a cumulative port of the following
OvmfPkg commits:
* 36c6413f76 "OvmfPkg: enable the IPv6 support", 2014-12-19
* 96302b80d9 "OvmfPkg: Enable Network2 Shell Commands for IPv6",
2016-03-08
* 6d0f8941bd "OvmfPkg: always resolve OpenSslLib, IntrinsicLib and
BaseCryptLib", 2017-01-17
* 32e22f20c9 "OvmfPkg: correct the IScsiDxe module included for the IPv6
stack", 2017-01-17
The IPv6-enabled IScsiDxe driver depends on BaseCryptLib, and the
"CryptoPkg/Library/BaseCryptLib/BaseCryptLib.inf" instance depends on
IntrinsicLib and OpensslLib. This is why commit 6d0f8941bd is relevant.
However, unlike in OvmfPkg, in ArmVirtPkg we'll precisely track the
firmware features that require these library classes. (The OvmfPkg
discussion was quite complex, and the OvmfPkg solution was a compromise:
<http://mid.mail-archive.com/1484569332-13440-1-git-send-email-jiaxin.wu@intel.com>.)
The ArmVirtXen platform is not extended with the relevant drivers because
currently it doesn't include any networking support.
Cc: Julien Grall <julien.grall@linaro.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1007
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This patch is to fix the incorrect cache key of
skip ModuleAutoGen cache.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Today's MpInitLib PEI implementation directly calls
PeiServices->GetHobList() from AP which may cause racing issue.
This patch fixes this issue by duplicating IDT for APs.
Because CpuMpData structure is stored just after IDT, the CpuMPData
address equals to IDTR.BASE + IDTR.LIMIT + 1.
v2:
1. Add ALIGN_VALUE() on BufferSize.
2. Add ASSERT() to make sure no memory usage outside of the allocated buffer.
3. Add more comments in InitConfig path when restoring CpuData[0].VolatileRegisters.
Cc: Jeff Fan <vanjeff_919@hotmail.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Fish Andrew <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
*v2: Resolve the conflict commit.
*v3: Fixed the failure if BodyLength in HTTP token is less than the received
size of HTTPS message.
HttpBodyParserCallback function is to parse the HTTP(S) message body so as to
confirm whether there is the next message header. But it doesn't record the
parsing message data/length correctly.
This patch is refine the parsing logic so as to fix the potential failure.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Gary Lin <glin@suse.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Tested-by: Gary Lin <glin@suse.com>
Adds support for the following X64 ELF relocations to GenFw
R_X86_64_GOTPCREL
R_X86_64_GOTPCRELX
R_X86_64_REX_GOTPCRELX
Background:
The GCC49 and GCC5 toolchains use the small pie model for X64. In the
small pie model, gcc emits a GOTPCREL relocation whenever C code takes
the address of a global function. The emission of GOTPCREL is mitigated
by several factors
1. In GCC49, all global symbols are declared hidden thereby eliminating
the emission of GOTPCREL.
2. In GCC5, LTO is used. In LTO, the complier first creates intermediate
representation (IR) files. During the static link stage, the LTO compiler
combines all IR files as a single compilation unit, using linker symbol
assistance to generate code. Any global symbols defined in the IR that
are not referenced from outside the IR are converted to local symbols -
thereby eliminating the emission of GOTPCREL for them.
3. The linker (binutils ld) further transforms any GOTPCREL used with
the movq opcode to a direct rip-relative relocation used with the leaq
opcode. This linker optimization can be disabled with the option
-Wl,--no-relax. Furthermore, gcc is able to emit GOTPCREL with other
opcodes
- pushq opcode for passing arguments to functions.
- addq/subq opcodes for pointer arithmetic.
These other opcode uses are not transformed by the linker.
Ultimately, in GCC5 there are some emissions of GOTPCREL that survive
all these mitigations - if C code takes the address of a global function
defined in assembly code - and performs pointer arithmetic on the
address - then the GOTPCREL remains in the final linker product.
A GOTPCREL relocation today causes the build to stop since GenFw does
not handle them. It is possible to eliminate any remaining GOTPCREL
emissions by manually declaring the global symbols causing them to have
hidden visibility. This patch is offered instead to allow GenFw to
handle any residual GOTPCREL.
Cc: Shi Steven <steven.shi@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zenith432 <zenith432@users.sourceforge.net>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When user input error password exceed the max allowed times, opal device
will return Invalid type error code even user input the correct password.
In this case, opal driver needs to force user shutdown the system before
let user input new password.
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Caller need to known this error to handle specially, but current
error status not has specified value for this type. In order to
keep compatibility, here use TcgResultFailureInvalidType as an
replacement.
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
The case is a PCD used in one library only, and in DSC component
section the PCD value is override in one of module inf. Then it cause
the bug the PCD size in the Lib autogen use the PCD value in the DSC
PCD section, but not use the override value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Hopefully this should tidy the conversion warnings.
----
Add 32-bit and 64-bit functions that count number of set bits in a bitfield
using a divide-and-count method.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Tomas Pilar <tpilar@solarflare.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Add a cache for the value of skip ModuleAutoGen
process flag. This cache can improve build performance.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Per PEP237(*), 'long' is unified with 'int' and removed from python3.
* To make the script compatible with both python2 and python3,
'type(0L)' is replaced with 'type(sys.maxsize + 1)'. In python2,
the number is 'long', while it's 'int' in python3. We can remove
the workaround after moving to python3 completely.
* long() is replaced with int() since int() returns a long when need.
(*) https://www.python.org/dev/peps/pep-0237/
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
The flash memory range is an IO address and should be presented as Memory
Mapped IO in EFI Runtime mapping. This information can be used by OS
when mapping the flash memory range.
It is especially helpful in SEV guest case, in which IO addresses should
be mapped as unencrypted. If memory region is not marked as MMIO then OS
maps the range as encrypted.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Justen Jordan L <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
After calling RegisterHotKey, the allocated memory in NewString should
be freed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
After calling SetVariable, the allocated memory in Variable should be
freed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Set the EFI_MEMORY_RUNTIME attribute in FtwNotificationEvent() only if
the attribute is not already present. This will ensure that the attributes
set by the platform drivers (e.g Ovmf pflash) is not lost.
Cc: Dong Eric <eric.dong@intel.com>
Cc: Justen Jordan L <jordan.l.justen@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reviewed-by: Star Zeng <star.zeng@intel.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
In mSmmBootPerformanceTable there are two parts,
one is the FPDT table header and the other is FPDT records.
Currently:
mPerformanceLength: The length of existing FPDT records.
mMaxPerformanceLength: The maximum length allocated for
mSmmBootPerformanceTable(including FPDT table header length
and existing FPDT records length)
But when compare mPerformanceLength with mMaxPerformanceLength
to check whether need to allocate new buffer for new FPDT
record, we miss to add mPerformanceLength with header length,
which will cause pool allocation behavior is not correct.
Now update the mPerformanceLength to fix this issue:
updated mPerformanceLength = FPDT table header length
+ existing FPDT records length.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When using Linaro GCC5+ arm-eabi toolchain on Windows, the generated
DSDT.iii contains a canonicalized ("\.\" removed and lower case)
filepath for the preprocessed DSDT.i file in the first line.
Trim.exe is called on DSDT.iii to generate DSDT.iiii, which does a
line for line comparison of filepaths encountered to the preprocessed
DSDT.i filepath found in the first line to determine what lines to
place in DSDT.iiii. Since the DSDT.i filepath is canonicalized and
all later filepaths in DSDT.iii are not canonicalized, all comparisons
fail and the result is in an empty DSDT.iiii.
Issue was first reported to Linaro here:
https://bugs.linaro.org/show_bug.cgi?id=2909
where the recommendation was to address the issue in Trim.exe.
This patch normalizes the case and pathname of all filepaths
encountered during Trim.exe execution on preprocessed files. This
fixes comparisons of filepaths that contain mismatching case on
case-insensitive filesystems, redundant separators, and uplevel
references.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Christopher Co <christopher.co@microsoft.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
RESET_UTILITY_GUID_SPECIFIC_RESET_DATA structure should be declared
as pack(1).
The patch adds the missing pack(1) pragma.
(GUID *)((UINT8 *)&ResetData +
OFFSET_OF (RESET_UTILITY_GUID_SPECIFIC_RESET_DATA, ResetSubtype))
is used to replace &ResetData.ResetSubType to resolve C4366 VS
compiler warning.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The patch adds check logic to make sure that for a input BMP file,
the width or height is not 0; for a input GOP blt buffer, the width
or height is not 0. Otherwise, UNSUPPORTED status is returned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Current code calculates ChannelCount based on CAP(NP) value.
It only works when the ports implemented number are <= CAP(NP),
for example, platform has CAP(NP) = 5 (means 6 ports) and ports
implemented are 0, 1, 2, 3, 4 and 5.
But we have some platform that has CAP(NP) = 1 (means 2 ports) and
ports implemented are 1 and 2, and has no port 0 implemented, then
current code does not work.
This patch updates the code to calculate ChannelCount based on PI value.
Cc: Amy Chan <amy.chan@intel.com>
Cc: Hong-chihX Hsueh <hong-chihx.hsueh@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Tested-by: Hong-chihX Hsueh <hong-chihx.hsueh@intel.com>
Current code assumes PpiDescriptor and Ppi are in same range
(heap/stack/hole).
This patch removes the assumption.
Descriptor needs to be converted first. It is also handled by this patch.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Qing Huang <qing.huang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
VariableHob may be built in PcdPeim (by PcdNvStoreDefaultValueBuffer)
or some platform module (by some tool).
The two solutions should not be co-exist.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
1) add a property so others can access needed data
2) change GenMake to use property
3) add local variable in GenMake to speed up access
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Two drivers include the same PCD file, the PCD value in the first
driver is correct, but it in the second driver is incorrect.
DSC:
[Components]
Testpkg/Testdriver1.inf {
<PcdsFixedAtBuild>
!include Test.txt
}
Testpkg/Testdriver2.inf {
<PcdsFixedAtBuild>
!include Test.txt
}
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
New added checkers includes:
1. Too many invalid parameters
2. Too few parameter
3. Invalid number parameter for -n and -t flag
4. Conflict parameter of -A and -R.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The perf measurement entry in SmmEntryPoint function
doesn't have significant meaning. So remove it now.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Replace StringIO.StringIO with io.BytesIO to be compatible with python3.
This commit also removes "import StringIO" from those python scripts
that don't really use it.
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Based on "futurize -f lib2to3.fixes.fix_idioms"
* Change some type comparisons to isinstance() calls:
type(x) == T -> isinstance(x, T)
type(x) is T -> isinstance(x, T)
type(x) != T -> not isinstance(x, T)
type(x) is not T -> not isinstance(x, T)
* Change "while 1:" into "while True:".
* Change both
v = list(EXPR)
v.sort()
foo(v)
and the more general
v = EXPR
v.sort()
foo(v)
into
v = sorted(EXPR)
foo(v)
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
"types.TypeType" is now an alias of the built-in "type" and is not
compatible with python 3.
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Replace "has_key()" with "in" to be compatible with python3.
Based on "futurize -f lib2to3.fixes.fix_has_key"
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Refactor print statements to be compatible with python 3.
Based on "futurize -f libfuturize.fixes.fix_print_with_import"
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Convert "except ... ," to "except ... as" to be compatible with python3.
Based on "futurize -f lib2to3.fixes.fix_except"
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=973
Bug 973 just mentions UsbBusDxe, but UsbBusPei has similar issue.
HUB descriptor has variable length.
But the code uses stack (HubDescriptor in PeiDoHubConfig) with fixed
length sizeof(EFI_USB_HUB_DESCRIPTOR) to hold HUB descriptor data.
It uses hard code length value (12) for SuperSpeed path.
And it uses HubDesc->Length for none SuperSpeed path, then there will
be stack overflow when HubDesc->Length is greater than
sizeof(EFI_USB_HUB_DESCRIPTOR).
The patch updates the code to use a big enough buffer to hold the
descriptor data.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=973
HUB descriptor has variable length.
But the code uses stack (HubDesc in UsbHubInit) with fixed length
sizeof(EFI_USB_HUB_DESCRIPTOR) to hold HUB descriptor data.
It uses hard code length value (32 that is greater than
sizeof(EFI_USB_HUB_DESCRIPTOR)) for SuperSpeed path, then there will
be stack overflow when IOMMU is enabled because the Unmap operation
will copy the data from device buffer to host buffer.
And it uses HubDesc->Length for none SuperSpeed path, then there will
be stack overflow when HubDesc->Length is greater than
sizeof(EFI_USB_HUB_DESCRIPTOR).
The patch updates the code to use a big enough buffer to hold the
descriptor data.
The definition EFI_USB_SUPER_SPEED_HUB_DESCRIPTOR is wrong (HubDelay
field should be UINT16 type) and no code is using it, the patch
removes it.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Add CapCRBIdleBypass definition to interface ID register. It complies with
existing register
Cc: Long Qin <qin.long@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
A single byte was allocate for a CHAR16 NUL terminator when instead
two bytes should have been used.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Since performance library instances have been updated
to create new FPDT records for new Perf macros.
So enhance dp tool to parse the new FPDT records.
Enhancement mainly includes:
1. parse the single records for PERF_EVENT macro
2. Parse the new added FPDT_DUAL_GUID_STRING_EVENT_RECORD
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Update the performance library instances in MdeModulePkg
to implement the APIs used for new added Perf macros.
V2:
Share the common logics of creating FPDT record for
new added Perf macros and existing Perf macros.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Remove the definitions of performance identifier since they
have been added into PerformanceLib.h.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Constructor is too early that ConnectAll() may not do. Move refresh boot
option in form open.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Xu WeiX <weix.xu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
BdsEntry marks the read-only variables if the Variable Lock protocol exists.
So, this protocol usage is updated from CONSUMES to SOMETIMES_CONSUMES.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
VS2017 reports warning LNK4281: undesirable base address 0x0 for x64 image;
set base address above 4GB for best ASLR optimization.
edk2 build always sets baes address to zero as default. So, ignore this link
warning.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Pete Batard <pete@akeo.ie>
The driver now can recognize the BlockIo2 PPI for NVM Express devices.
And support identifying the recovery capsule on those devices.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Introduces the below PPI:
struct EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI {
EDKII_NVM_EXPRESS_HC_GET_MMIO_BAR GetNvmeHcMmioBar;
EDKII_NVM_EXPRESS_HC_GET_DEVICE_PATH GetNvmeHcDevicePath;
};
The GetNvmeHcMmioBar service will provide the caller with the MMIO BAR
address of each NVMe HC within the system;
The GetNvmeHcDevicePath service will provide the caller with the device
path information of each NVMe HC.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
FSP binary potentially can include X64 drivers to
simplify implementation or support new features so
update SplitFspBin.py to support x64 image headers.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Stack overflows were observed at the default SMM stack
size of 8 KB. Increase stack size to 16 KB to prevent
SMM stack overflows.
Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>
Dynamically allocate the buffer to receive the SCMI protocol list.
This makes MAX_PROTOCOLS redundant, so it is removed.
It also fixes one minor code alignment issue and removes an unused
macro PROTOCOL_MASK.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This change fixes a bug in the SCMI DXE which is observed with the
upcoming release of the SCP firmware.
The PROTOCOL_ID_MASK (0xF) which is used to generate an index in
the ProtocolInitFxns is wrong because protocol ids can be
anywhere in 0x10 - 15 or 0x80 - FF range. This mask generates
the same index for two different protocols e.g. for protocol ids
0x10 and 0x90, which causes duplicate initialization of a protocol
resulting in a failure.
This change removes the use of PROTOCOL_ID_MASK and instead
uses a list of protocol ids and their initialization functions
to identify a supported protocol and initialize it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The DSC and FDF file can use `!error` statement. The argument of this
statement is an error message, it causes build tool to stop at the
location where the statement is encountered and error message following
the `!error` statement is output as a message.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=701
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Do a clean up to remove the unneeded code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Mva address calculation should use the left-shifted current
section index instead of the left-shifted table base address.
Using the table base address here has the side-effect of potentially
causing an access violation depending on the base address value.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Christopher Co <christopher.co@microsoft.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Given that these days, our ARM port only supports ARMv7 and later, we
can assume that the page table walker's memory accesses are cache
coherent, and so there is no need to perform cache maintenance. It
does require the page tables themselves to reside in memory mapped as
writeback cacheable so ASSERT() that this is the case.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Peculiarly enough, the current page table manipulation code takes it
upon itself to write back and invalidate the memory contents covered
by page and section mappings when their memory attributes change. It
is not generally the case that data must be written back when such a
change occurs, even when switching from cacheable to non-cacheable
attributes, and in some cases, it is actually causing problems. (The
cache maintenance is also performed on the PCIe MMIO regions as they
get mapped by the PCI bus driver, and under virtualization, each
cache maintenance operation on an emulated MMIO region triggers a
round trip to the host and back)
So let's just drop this code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Today's implementation returns 0 even when compared files are
different.
The patch returns 27 (SHELL_NOT_QUAL) in such case to follow
the shell spec.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The SATA controller driver crashes while accessing the
PCI memory [AHCI Base Registers (ABAR)], as the PCI memory
space is not enabled.
Enable the PCI memory space access to prevent the SATA
Controller driver from crashing.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
CpuDxe driver is updated to be able to access DXE page table in SMM mode,
which means Heap Guard can get correct memory paging attributes in what
environment. It's not necessary to exclude SMM from detecting Heap Guard
feature support.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The MdePkg/Library/SmmMemoryAllocationLib, used only by DXE_SMM_DRIVER,
allows to free memory allocated in DXE (before EndOfDxe). This is done
by checking the memory range and calling gBS services to do real
operation if the memory to free is out of SMRAM. If some memory related
features, like Heap Guard, are enabled, gBS interface will turn to
EFI_CPU_ARCH_PROTOCOL.SetMemoryAttributes(), provided by
DXE driver UefiCpuPkg/CpuDxe, to change memory paging attributes. This
means we have part of DXE code running in SMM mode in certain
circumstances.
Because page table in SMM mode is different from DXE mode and CpuDxe
always uses current registers (CR0, CR3, etc.) to get memory paging
attributes, it cannot get the correct attributes of DXE memory in SMM
mode from SMM page table. This will cause incorrect memory manipulations,
like fail the releasing of Guard pages if Heap Guard is enabled.
The solution in this patch is to store the DXE page table information
(e.g. value of CR0, CR3 registers, etc.) in a global variable of CpuDxe
driver. If CpuDxe detects it's in SMM mode, it will use this global
variable to access page table instead of current processor registers.
This can avoid retrieving wrong DXE memory paging attributes and changing
SMM page table attributes unexpectedly.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
On AMD processors the second SendIpi in the SendInitSipiSipi and
SendInitSipiSipiAllExcludingSelf routines is not required, and may cause
undesired side-effects during MP initialization.
This patch leverages the StandardSignatureIsAuthenticAMD check to exclude
the second SendIpi and its associated MicroSecondDelay (200).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leo Duran <leo.duran@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This commit enhances the bitmap fields defined in the IPMI header files,
union types will be used to provide the users with both the individual
bitmap access and the whole byte/word access.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The patch doesn't have functionality impact. It is just to make
VS2010/VS2012 happy.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Currently, DebugCommunicationLibUsb uses the hardcoded endpoints 0x82
and 0x01 to communicate with the EHCI Debug Device. These, however,
are not standardized and may vary across different hardware.
To solve this problem, the endpoints are retrieved from the
USB Device Descriptor directly.
V2:
- Store endpoint data in the USB Debug Port handle structure.
V3:
- Remove the static endpoint PCDs as requested.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Clang complains about left shifting a negative value being undefined.
EmbeddedPkg/Library/GdbSerialLib/GdbSerialLib.c:151:30:
error: shifting a negative signed value is undefined [-Werror,-Wshift-negative-value]
OutputData = (UINT8)((~DLAB<<7)|((BreakSet<<6)|((Parity<<3)|((StopBits<<2)| Data))));
Redefine all bit pattern constants as unsigned to work around this.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Align the prototype of ArmMtlLib's MtlWaitUntilChannelFree () with the
one in the ArmMtlNullLib implementation (rather than the other way around,
since edk2-platforms has a conflicting implementation as well)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Create the missing NOOPT target for CLANG35 (which is ARM and AARCH64
only), and align it with the other toolchains: NOOPT has optimizations
disabled entirely (for source level debugging), and DEBUG is changed
from -O0 to -O1, as is the case for CLANG38 as well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Enable to NOOPT build target so we can build this package with
optimizations disabled.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Enable to NOOPT build target so we can build this package with
optimizations disabled.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
As reported by Liming, GCC 4.9.2 does not support the -no-pie
linker option that we added to the GCC49 and GCC5 toolchain
profiles in commit c25d390552 ("BaseTools/tools_def IA32:
disable PIE code generation explicitly") to work around issues
with recent distro toolchains that enable PIE code generation
by default.
So rollback the changes for GCC49 but preserve them for GCC5
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Implement ResetSystemLib's EnterS3WithImmediateWake() routine using
a jump back to the PEI entry point with interrupts and MMU+caches
disabled. This is only possible at boot time, when we are sure that
the current CPU is the only one up and running. Also, it depends on
the platform whether the PEI code is preserved in memory (it may be
copied to DRAM rather than execute in place), so also add a feature
PCD to selectively enable this feature.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
ARM platforms have no restriction on when a system firmware update
capsule can be applied, and so it is not necessary to call
ProcessCapsules() twice. So let's drop the first invocation that
occurs before EndOfDxe, and rewrite the second call so that all
capsule updates will be applied when the console is up and able to
provide progress feedback.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
If the first call to UpdateImageProgress() fails, there is no point
in passing a pointer to it to Fmp->SetImage(), since it is highly
unlikely to succeed on any subsequent calls.
This permits the FMP implementation to fall back to an alternate means
of providing feedback to the user, e.g., via the console.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When capsule updates are staged for processing after a warm reboot,
they are copied into memory with the MMU and caches enabled. When
the capsule PEI gets around to coalescing the capsule, the MMU and
caches may still be disabled, and so on architectures where uncached
accesses are incoherent with the caches (such as ARM and AARCH64),
we need to ensure that the data passed into UpdateCapsule() is
written back to main memory before performing the warm reboot.
Unfortunately, on ARM, the only type of cache maintenance instructions
that are suitable for this purpose operate on virtual addresses only,
and given that the UpdateCapsule() prototype includes the physical
address of a linked list of scatter/gather data structures that are
mapped at an address that is unknown to the firmware (and may not even
be mapped at all when UpdateCapsule() is invoked), we can only perform
this cache maintenance at boot time. Fortunately, both Windows and Linux
only invoke UpdateCapsule() before calling ExitBootServices(), so this
is not a problem in practice.
In the future, we may propose adding a secure firmware service that
permits performing the cache maintenance at OS runtime, in which case
this code may be enhanced to call that service if available. For now,
we just fail any UpdateCapsule() calls performed at OS runtime on ARM.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Check the return value of HiiGetBrowserData() before calling HiiSetBrowserData().
HiiGetBrowserData() failed to retrieve NV data during action EFI_BROWSER_ACTION_RETRIEVE.
If NV data is invalid, stop sending it to form browser.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Nickle Wang <nickle.wang@hpe.com>
Signed-off-by: cinnamon shia <cinnamon.shia@hpe.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Add QemuRamfbDxe device path to the list of platform console devices,
so ConSplitter will pick up the device even though it isn't a PCI GPU.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Per PI spec, the Length value is the length of the ACPI descriptor
in bytes, excluding the first two fields.
The patch fixes the code to report the correct descriptor length
by excluding 3-byte first two fields.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Some platform support dynamic clocking, which is controlled by some
jumper setting or hardware registers. Result of that is that PCD
PL011UartClkInHz would need to be updated for frequency change.
This patch implements support for dynamic frequency for PL011 uart.
This patch implements default lib, which is using Pcd. Platform which
needs dynamic clocking needs implement PL011UartClockLib
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Udit Kumar <udit.kumar@nxp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
V3:
support exclude dir and file by name while traversing the directory.
remove close in with statement.
V2:
add version,description,copyright.
add flag -v,-q,--append-extensions,--override-extensions,--debug.
-q will omit default output,-v and --debug are not implemented.
add default file extensions.
support input of file path.
support muliple input path.
simplify comment.
change 'pattern'.encode() to b'pattern',I think this will be better.
change naming of variable and function to keep the same with BinToPcd.py
V1:
FormatDosFiles.py is added to clean up dos source files. It bases on
the rules defined in EDKII C Coding Standards Specification.
5.1.2 Do not use tab characters
5.1.6 Only use CRLF (Carriage Return Line Feed) line endings.
5.1.7 All files must end with CRLF
No trailing white space in one line. (To be added in spec)
The source files in edk2 project with the below postfix are dos format.
.h .c .nasm .nasmb .asm .S .inf .dec .dsc .fdf .uni .asl .aslc .vfr .idf
.txt .bat .py
The package maintainer can use this script to clean up all files in his
package. The prefer way is to create one patch per one package.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Dongao Guo <dongao.guo@intel.com>
The case is DSC file include file1, file1 include file2, after parse
file2 finished, DSC parser get the wrong section type, then it would
report invalid error.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
Currently in DP, the Trace mode is enabled by default.
And the profile mode is not implemented. but the help info
of DP tool doesn't match current implementation. Which will
make user confused. So now remove the unused source code
related to the profile mode and update the help information
of DP tool.
V2: Remove the unused code related to profile mode.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Issue:
When run "dp -s" or ("dp -v") command in shell several times,
the summary reuslts are different each time.
The root cause is that the previous global data "SummaryData"
is not cleaned when the dp command is callled next time.
This patch initializes the global data "SummaryData"
when the dp dymanic command is called.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Run dp command now:
Firstly it will get performance records from FPDT and then
parse the DP command. And if encounter invalid parameters,
it will exit directly. Thus the performance records got before
are invalid. And what's worse is that the memory allocated in
getting performance records phase is not freed.
This patch update the code to parse the command firstly and
then get the performance records. And make sure that all the
clean work has been done before exiting.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
As a security measure, some distros now build their GCC toolchains with
PIE code generation enabled by default, because it is a prerequisite
for ASLR to be enabled when running the executable.
This typically results in slightly larger code, but it also generates
ELF relocations that our tooling cannot deal with, so let's disable it
explicitly when using GCC49 or later for IA32. (Note that this does not
apply to X64: it uses PIE code deliberately in some cases, and our
tooling does deal with the resuling relocations)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Commit 180ac200da changes the input parameter
from BOOLEAN to UINTN. Its comparison logic should be updated.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Commit cb96e7d4f7 changes the input parameter
from BOOLEAN to UINTN. Its comparison logic should be updated.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Commit d2aafe1e41 changes the input parameter
from BOOLEAN to UINTN. Its comparison logic should be updated.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Switch to the new IoLib implementation that will only use KVM
safe instructions to perform MMIO memory accesses.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
KVM on ARM refuses to decode load/store instructions used to perform
I/O to emulated devices, and instead relies on the exception syndrome
information to describe the operand register, access size, etc.
This is only possible for instructions that have a single input/output
register (as opposed to ones that increment the offset register, or
load/store pair instructions, etc). Otherwise, QEMU crashes with the
following error
error: kvm run failed Function not implemented
R00=01010101 R01=00000008 R02=00000048 R03=08000820
R04=00000120 R05=7faaa0e0 R06=7faaa0dc R07=7faaa0e8
R08=7faaa0ec R09=7faaa088 R10=000000ff R11=00000080
R12=ff000000 R13=7fccfe08 R14=7faa835f R15=7faa887c
PSR=800001f3 N--- T svc32
QEMU: Terminated
and KVM produces a warning such as the following in the kernel log
kvm [17646]: load/store instruction decoding not implemented
The IoLib implementation provided by MdePkg/Library/BaseIoLibIntrinsic
is based on C code, and when LTO is in effect, the MMIO accesses could
be merged with, e.g., manipulations of the loop counter, producing
opcodes that KVM does not support for emulated MMIO.
So let's add a special ArmVirt flavor of this library that implements
that actual load/store operations in assembler, ensuring that the
instructions involved can be emulated by KVM.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The dsc nested include checking make unexpected build error when
building project A and switch to project B.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
This was the warning (shown for __aeabi_memcpy, __aeabi_memcpy4 and
__aeabi_memcpy8):
ArmPkg/Library/CompilerIntrinsicsLib/memcpy.c:42:6:
error: '__aeabi_memcpy8' alias between functions of incompatible types
'void(void*, const void *, size_t)'
{aka 'void(void *, const void *, unsigned int)'}
and 'void *(void *, const void *, size_t)'
{aka 'void *(void *, const void *, unsigned int)'} [-Werror=attribute-alias]
void __aeabi_memcpy8(void *dest, const void *src, size_t n);
ArmPkg/Library/CompilerIntrinsicsLib/memcpy.c:19:7: note: aliased declaration here
void *__memcpy(void *dest, const void *src, size_t n)
The problem is the different return type (void vs void*). So reshuffle
the code so the prototypes match between the aliases.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
[ardb: change prototype of internal __memcpy() and drop extra wrapper]
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Lower the priority of the DEBUG print in EmmcReadWrite(), which
is emitted for each read or write operation to the eMMC device,
which clutters up the log output of builds created with DEBUG_INFO
enabled.
Suggested-by: Pipat Methavanitpong <methavanitpong.pipat@socionext.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Current implemenation sets PM1_CNT.SCI_EN bit at ReadyToBoot event.
However, this should not be done because this causes OS to skip triggering
FADT.SMI_CMD, which leads to the functions implemented in the SMI
handler being omitted.
This issue was identified by Matt Delco <delco@google.com>.
The fix does the following:
- The SCI_EN bit setting is removed from CbSupportDxe driver.
- Some additional checks are added in CbParseFadtInfo() in CbParseLib.c to
output some error message and ASSERT (FALSE) if ALL of the following
conditions are met:
1) HARDWARE_REDUCED_ACPI is not set;
2) SMI_CMD field is zero;
3) SCI_EN bit is zero;
which indicates the ACPI enabling status is inconsistent: SCI is not
enabled but the ACPI table does not provide a means to enable it through
FADT->SMI_CMD. This may cause issues in OS.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Prince Agyeman <prince.agyeman@intel.com>
Cc: Matt Delco <delco@google.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Matt Delco <delco@google.com>
The patch 5a57246eab Rename String to StringUtils, but it didn't
update the UPT Tool for the import statement which cause UPT tool
break.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Put the UART in FIFO Polled Mode by clearing IER after setting FCR.
Also, add comments to show DLAB state for registers 0 and 1.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leo Duran <leo.duran@amd.com>
Cc: Star Zeng <star.zeng@intel.com>
CC: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=801
Based on content from the following branch/commits:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport
* Change Update_Image_Progress() to UpdateImageProcess()
* Call DisplayUpdateProgressLib from UpdateImageProgress().
* Split out a boot service and runtime version of
UpdateImageProgress() so the DisplayUpdateProgressLib is
not used at runtime.
* If gEdkiiFirmwareManagementProgressProtocolGuid is present,
then use its progress bar color and watchdog timer value.
* If gEdkiiFirmwareManagementProgressProtocolGuid is not present,
then use default progress bar color and 5 min watchdog timer.
* Remove Print() calls during capsule processing. Instead,
the DisplayUpdateProgressLib is used to inform the user
of progress during a capsule update.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The patch adds AtaAtapiPolicy protocol which is produced by platform
and consumed by AtaAtapiPassThruDxe driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The patch adds support to certain devices that support PUIS (Power
up in Standby).
For those devices that supports SET_FEATURE spin up, SW needs to
send SET_FEATURE subcommand to spin up the devices.
For those devices that doesn't support SET_FEATURE spin up, SW needs
to send read sectors command to spin up the devices.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
NASM has replaced ASM and S files.
1. Remove ASM from all modules expect for the ones in ResetVector directory.
The ones in ResetVector directory are included by Vtf0.nasmb. They are
also nasm style.
2. Remove S files from the drivers only.
3. https://bugzilla.tianocore.org/show_bug.cgi?id=881
After NASM is updated, S files can be removed from Library.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
NASM has replaced ASM and S files.
1. Remove ASM from all modules.
2. Remove S files from the drivers only.
3. https://bugzilla.tianocore.org/show_bug.cgi?id=881
After NASM is updated, S files can be removed from Library.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
NASM has replaced ASM and S files.
1. Remove ASM from all modules.
2. Remove S files from the drivers only.
3. https://bugzilla.tianocore.org/show_bug.cgi?id=881
After NASM is updated, S files can be removed from Library.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
GCC8 reported it with the following warning:
ArmPkg/Library/ArmDisassemblerLib/ArmDisassembler.c: In function 'DisassembleArmInstruction':
ArmPkg/Library/ArmDisassemblerLib/ArmDisassembler.c:397:30: error: bitwise
comparison always evaluates to false [-Werror=tautological-compare]
if ((OpCode & 0x0db00000) == 0x03200000) {
This condition tries to be true for both the immediate and the register
version of the MSR instruction. They get identified inside the if-block
using the variable I, which contains the value of bit 25.
The problem with the comparison reported by GCC is that the
bitmask excludes bit 25, while the value requires it to be set to one:
0x0db00000: 0000 11011 0 11 00 00 0000 000000000000
0x03200000: 0000 00110 0 10 00 00 0000 000000000000
^
So the solution is to just don't require that bit to be set, because
it gets checked later using 'I', which results in the following value:
0x01200000: 0000 00010 0 10 00 00 0000 000000000000
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add support for the following types to VolInfo:
EFI_FV_FILETYPE_MM_STANDALONE
EFI_FV_FILETYPE_MM_CORE_STANDALONE
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ezra Godfrey <egodfrey.qdt@qualcommdatacenter.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
If the PCD's datum type is UINT8, UINT16, UINT32 or UINT64, then in
the report will display both hexadecimal format and integer format
of PCD value.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
According to VTd spec, Software writes the value read from this
field (F) to Clear it. But current code is using 0 to clear the
field, that is incorrect.
And R_FSTS_REG register value clearing should be not in the for loop.
Without this patch, we will see same VTd error message appears again
and again after it occurs first time.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This patch add function EfiTimeToWday() which returns
day of the week.
It is needed by our upcoming patches in edk2-platforms.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
BootLogo protocol is not always required. If it not is installed,
BootManagerMenuApp can work.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Because the DxeResetSystemLib calls gRT->ResetSystem(), make sure
the gRT->ResetSystem() implementation doesn't call into
DxeResetSystemLib to avoid chicken-egg issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Current DxeResetSystemLib depends on UefiRuntimeLib because it calls
EfiResetSystem() API exposed by UefiRuntimeLib.
Due to the commit:
"MdePkg/UefiRuntimeLib: Do not allow to be linked by DXE driver"
which reverts UefiRuntimeLib to only support DXE_RUNTIME_DRIVER,
removing UefiRuntimeLib dependency makes the DxeResetSystemLib
can be used by DXE drivers.
The patch also disallows the DxeResetSystemLib to be linked by
runtime driver, SMM drivers.
Runtime driver cannot link to this library because the gRT is not
converted when entering to RT.
SMM driver cannot link to this library because calling RT services
from SMM after EndOfDxe violates security guideline.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
When UefiRuntimeLib links to a DXE driver, its constructor
still registers a Virtual Address Change event. The event callback
will get called when RT.SetVirtualAddressMap() is called from OS.
But when the driver is a DXE driver, the memory occupied by the
callback function might be zeroed or used by OS since the BS type
memory is free memory when entering to RT phase.
The patch reverts commit 97511979b4
"MdePkg/UefiRuntimeLib: Support more module types."
It makes sure that DXE driver cannot link to this library.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
BZ#: https://bugzilla.tianocore.org/show_bug.cgi?id=923
X509_NAME_get_text_by_NID() used in X509GetCommonName() implementation
is one legacy function which have various limitations. The returned
data may be not usable when the target cert contains multicharacter
string type like a BMPString or a UTF8String.
This patch replaced the legacy function usage with more general
X509_NAME_get_index_by_NID() / X509_NAME_get_entry() APIs for X509
CommonName retrieving.
Tests: Validated the commonName retrieving with test certificates
containing PrintableString or BMPString data.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Long Qin <qin.long@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Until now the possible errors returned from processing
boot firmware volume were not checked, which could cause
misbehavior in further booting stages. Add relevant assert.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Add a PCD that holds the lowest supported version number, so that we
can allow the platform to configure this at build time.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Replace the call to and implementation of the function
FpdtAllocateReservedMemoryBelow4G() with a call to
AllocatePeiAccessiblePages, which boils down to the same on X64,
but does not crash non-X64 systems that lack memory below 4 GB.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Replace the call to and implementation of the function
FpdtAllocateReservedMemoryBelow4G() with a call to
AllocatePeiAccessiblePages, which boils down to the same on X64,
but does not crash non-X64 systems that lack memory below 4 GB.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Add a routine to DxeServicesLib that abstracts the allocation of memory
that should be accessible by PEI after resuming from S3. We will use it
to replace open coded implementations that limit the address to < 4 GB,
which may not be possible on non-Intel systems that have no 32-bit
addressable memory at all.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Consumers of status code reports may rely on a status code to be
reported when the ReadyToBoot event is signalled. For instance,
FirmwarePerformanceDxe will fail to install the FPDT ACPI table
in this case. So add the missing call.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Consumers of status code reports may rely on a status code to be
reported when the ReadyToBoot event is signalled. For instance,
FirmwarePerformanceDxe will fail to install the FPDT ACPI table
in this case. So add the missing call.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Almost exactly two years after commit 2f7b34b208, we've grown out the
10MB DXEFV:
> build -a IA32 -a X64 -p OvmfPkg/OvmfPkgIa32X64.dsc -b NOOPT -t GCC48 \
> -D SMM_REQUIRE -D SECURE_BOOT_ENABLE -D TLS_ENABLE -D E1000_ENABLE \
> -D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE
>
> [...]
>
> GenFv: ERROR 3000: Invalid
> the required fv image size 0xa28d48 exceeds the set fv image size
> 0xa00000
Raise the DXEFV size to 11MB.
(For builds that don't need this DXEFV bump, I've checked the
FVMAIN_COMPACT increase stemming from the additional 1MB padding, using
NOOPT + GCC48 + FD_SIZE_2MB, and no other "-D" flags. In the IA32 build,
FVMAIN_COMPACT grows by 232 bytes. In the IA32X64 build, FVMAIN_COMPACT
shrinks by 64 bytes. In the X64 build, FVMAIN_COMPACT shrinks by 376
bytes.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Gary Lin <glin@suse.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=801
Add a new API to the PlatformFlashAccessLib that passes
in an optional Progress() function along with a start and
end percentage to call the Progress() function with.
If the Progress() function is not NULL, then it is the
Progress() function that was passed into the Firmware
Management Protocol SetImage() services and is used
to update the user on the progress as a firmware device
is updated with a firmware image.
Implementations of the PlatformFlashAccessLib are
recommended to call the Progress() function as work
is performed to update to contents of a firmware
storage device.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=801
Based on content from the following branch/commits:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport
Add the DisplayUpdateProgressLib class that is used
to inform the user of progress during updates of
firmware images in firmware devices. A platform
specific instance of this library can be used to
customize how the user is informed of progress.
Add the EDK II Firmware Management Progress Protocol.
This is an optional protocol that must be installed
onto the same handle as a Firmware Management Protocol.
This new protocol provides the color of a progress
bar that allows different firmware devices to use
different colors during a firmware update. It also
provides a watchdog timer value in seconds that is
armed each time the Progress() service passed
into Firmware Management Protocol SetImage()
is called.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Per PCIE spec, Memory Write and Invalidate is hardwired to 0b so
PciBus driver shouldn't write 1b to it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
CreatePciIoDevice() detects whether the PCI device is a PCI Express
device and remembers the device type in PciIoDevice->IsPciExp.
RegisterPciDevice() detects the device type again which is
unnecessary. The detection logic can be removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
According to IA manual:
"Before setting this bit (MSR_IA32_MISC_ENABLE[22]) , BIOS must
execute the CPUID.0H and examine the maximum value returned in
EAX[7:0]. If the maximum value is greater than 2, this bit is
supported."
We need to fix our current detection logic to compare against 2.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Ming Shao <ming.shao@intel.com>
In certain HW implementation, the BIT7 of RTC Index register(0x70) is
for NMI sources enable/disable but the BIT7 of 0x70 cannot be read
before writing. Software which doesn't want to change the NMI sources
enable/disable setting can write to the alias register 0x74, through
which only BIT0 ~ BIT6 of 0x70 is modified.
So two new PCDs are added so that platform can have the flexibility
to change the default RTC register addresses from 0x70/0x71 to
0x74/0x75.
With the new PCDs added, it can also support special HW that provides
RTC storage in a different register pairs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
For case-insensitive file systems, edk2 String.py collides with the
Python string.py, which results in build errors. This,for example,
applies to building via the Windows Subsystem for Linux from a
DriveFS file system. This patch renames String to StringUtils to
prevent conflicts for case-insensitive file systems.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
MmSwDispatch.h current refers to the deprecated SmmSw2Dispatch
protocol. Replace those references with the new MmSwDispatch name.
V2:
- Do not change the copyright date as requested.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch adds the HPET Event Timer Block ID definition that can be
found in the IA-PC HPET Specification, section 3.2.4.
V2:
- Do not change the copyright date as requested.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The EvaluateConditional function should not call GetRealFileLine
because this is already done in Warning init and only needs to be
calculated in the event of a parsing failure. This fix stops
InsertedLines from being subtracted twice during error handling.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zurcher, Christopher J <christopher.j.zurcher@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Current code assumes the max bus(0xFF) is under this P2P bridge and
temporarily set it as subordinate bus.
It may cause silicon hangs during PCI enumeration in some specific
case.
Instead, it should get the max bus number from the bus number
resources returned from
PCI_HOST_BRIDGE_RESOURCE_ALLOCATION.StartBusEnumeration() and set it
as subordinate bus.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Currently, SmbiosLib declares the PcdLib library class. Update the
declaration to declare SmbiosLib.
V2:
- Do not change the copyright date as requested.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Replace the manual capability list parsing in OvmfPkg/Virtio10Dxe with
PciCapLib and PciCapPciIoLib API calls.
The VIRTIO_PCI_CAP_LINK structure type is now superfluous. (Well, it
always has been; we should have used EFI_PCI_CAPABILITY_HDR.)
Also, EFI_PCI_CAPABILITY_VENDOR_HDR is now included at the front of
VIRTIO_PCI_CAP. No driver other than Virtio10Dxe relies on VIRTIO_PCI_CAP.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Replace the manual capability list parsing in OvmfPkg/PciHotPlugInitDxe
with PciCapLib and PciCapPciSegmentLib API calls.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Resolve the PciCapLib, PciCapPciSegmentLib, and PciCapPciIoLib classes to
their single respective instances under OvmfPkg. Later patches will use
those lib classes in OvmfPkg drivers, some of which are included in
ArmVirt platforms.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Resolve the PciCapLib, PciCapPciSegmentLib, and PciCapPciIoLib classes to
their single respective instances. Later patches will use these lib
classes in OvmfPkg drivers.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add a library class, and a UEFI_DRIVER lib instance, that are layered on
top of PciCapLib, and allow clients to plug an EFI_PCI_IO_PROTOCOL backend
into PciCapLib, for config space access.
(Side note:
Although the UEFI spec says that EFI_PCI_IO_PROTOCOL_CONFIG() returns
EFI_UNSUPPORTED if "[t]he address range specified by Offset, Width, and
Count is not valid for the PCI configuration header of the PCI
controller", this patch doesn't directly document the EFI_UNSUPPORTED
error code, for ProtoDevTransferConfig() and its callers
ProtoDevReadConfig() and ProtoDevWriteConfig(). Instead, the patch refers
to "unspecified error codes". The reason is that in edk2, the
PciIoConfigRead() and PciIoConfigWrite() functions [1] can also return
EFI_INVALID_PARAMETER for the above situation.
Namely, PciIoConfigRead() and PciIoConfigWrite() first call
PciIoVerifyConfigAccess(), which indeed produces the standard
EFI_UNSUPPORTED error code, if the device's config space is exceeded.
However, if PciIoVerifyConfigAccess() passes, and we reach
RootBridgeIoPciRead() and RootBridgeIoPciWrite() [2], then
RootBridgeIoCheckParameter() can still fail, e.g. if the root bridge
doesn't support extended config space (see commit 014b472053).
For all kinds of Limit violations in IO, MMIO, and config space,
RootBridgeIoCheckParameter() returns EFI_INVALID_PARAMETER, not
EFI_UNSUPPORTED. That error code is then propagated up to, and out of,
PciIoConfigRead() and PciIoConfigWrite().
[1] MdeModulePkg/Bus/Pci/PciBusDxe/PciIo.c
[2] MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c
)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add a library class, and a BASE lib instance, that are layered on top of
PciCapLib, and allow clients to plug a PciSegmentLib backend into
PciCapLib, for config space access.
(Side note:
The "MaxDomain" parameter is provided because, in practice, platforms
exist where a PCI Express device may show up on a root bridge such that
the root bridge doesn't support access to extended config space. Earlier
the same issue was handled for MdeModulePkg/PciHostBridgeDxe in commit
014b472053. However, that solution does not apply to the PciSegmentLib
class, because:
(1) The config space accessor functions of the PciSegmentLib class, such
as PciSegmentReadBuffer(), have no way of informing the caller whether
access to extended config space actually succeeds.
(For example, in the UefiPciSegmentLibPciRootBridgeIo instace, which
could in theory benefit from commit 014b472053, the
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.Pci.Read() status code is explicitly
ignored, because there's no way for the lib instance to propagate it
to the PciSegmentLib caller. If the
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.Pci.Read() call fails, then
DxePciSegmentLibPciRootBridgeIoReadWorker() returns Data with
indeterminate value.)
(2) There is no *general* way for any firmware platform to provide, or
use, a PciSegmentLib instance in which access to extended config space
always succeeds.
In brief, on a platform where config space may be limited to 256 bytes,
access to extended config space through PciSegmentLib may invoke undefined
behavior; therefore PciCapPciSegmentLib must give platforms a way to
prevent such access.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add a library class, and a BASE lib instance, to work more easily with PCI
capabilities in PCI config space. Functions are provided to parse
capabilities lists, and to locate, describe, read and write capabilities.
PCI config space access is abstracted away.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Commit 88252a90d1 changed ValueChain
from a dict to a set, but also changed the (former) key type from a
touple to two separate values, which was probably unintended and also
breaks build for packages involving Structured PCDs, because add()
only takes one argument.
This commit changes the values back to touples.
V2:
- Removed a whitespace change.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Call Tcg2PhysicalPresenceLibProcessRequest() to process pending PPI
requests from PlatformBootManagerAfterConsole().
Laszlo understanding of edk2 is that the PPI operation processing was
meant to occur *entirely* before End-Of-Dxe, so that 3rd party UEFI
drivers couldn't interfere with PPI opcode processing *at all*.
He suggested that we should *not* call
Tcg2PhysicalPresenceLibProcessRequest() from BeforeConsole(). Because,
an "auth" console, i.e. one that does not depend on a 3rd party
driver, is *in general* impossible to guarantee. Instead we could opt
to trust 3rd party drivers, and use the "normal" console(s) in
AfterConsole(), in order to let the user confirm the PPI requests. It
will depend on the user to enable Secure Boot, so that the
trustworthiness of those 3rd party drivers is ensured. If an attacker
roots the guest OS from within, queues some TPM2 PPI requests, and
also modifies drivers on the EFI system partition and/or in GPU option
ROMs (?), then those drivers will not load after guest reboot, and
thus the dependent console(s) won't be used for confirming the PPI
requests.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cloned "SecurityPkg/Library/DxeTcg2PhysicalPresenceLib" and:
- removed all the functions that are unreachable from
Tcg2PhysicalPresenceLibProcessRequest() [called from platform BDS],
or SubmitRequestToPreOSFunction() and
ReturnOperationResponseToOsFunction() [called from Tcg2Dxe].
- replaced everything that's related to the
TCG2_PHYSICAL_PRESENCE*_VARIABLE variables, with direct access to
the QEMU structures.
This commit is based on initial experimental work from Stefan Berger.
In particular, he wrote most of QEMU PPI support, and designed the
qemu/firmware interaction. Initially, Stefan tried to reuse the
existing SecurityPkg code, but we eventually decided to get rid of the
variables and simplify the ovmf/qemu version.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[lersek@redhat.com: clean up non-idiomatic coding style]
[lersek@redhat.com: null mPpi on invalid PPI address]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add some common macros and type definitions corresponding to the QEMU
TPM interface.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
This NULL library will let us call
Tcg2PhysicalPresenceLibProcessRequest() unconditionally from
BdsPlatform when building without TPM2_ENABLE.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[lersek@redhat.com: replace MdeModulePkg.dec w/ MdePkg.dec]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Error message is not clear when PCD type defined in driver's Library
is different with PCD type defined in DSC components or PCD type
defined in DSC PCD section.
Case as below:
DSC:
[PcdsFixedAtBuild]
PcdToken.PcdCName | "A"
[Components]
TestPkg/TestDriver.inf {
<PcdsPatchableInModule>
PcdToken.PcdCName | "B"
}
Library:
[Pcd]
PcdToken.PcdCName
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Per DSC spec 3.11 [Components] Sections:
The PCD access methods (and storage methods) are selected on a platform
basis - it is not permitted to have a PCD listed in one of the Pcd
sections and use it differently in an individual module. For example,
if a PCD is listed in a [PcdsFixedAtBuild] section, it is not permitted
to list it in a <PcdsPatchableInModule> sub-section of an INF file.
but current code doesn't report error for this case.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=951
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Update package format info in _PRS to TcgNvs after memory is allocated.
Change-Id: Icfadb350e60d3ed2df332e92c257ce13309c0018
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Yao Jiewen <jiewen.yao@intel.com>
Cc: Long Qin <qin.long@intel.com>
Signed-off-by: Zhang, Chao B <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
The crossing GCC compiler may use the different path for make and gcc tool.
So, GCC_HOST_BIN is introduced for make path. GCC5_BIN is still kept for
gcc path. User needs to set GCC_HOST_BIN besides set GCC5_BIN env if
the default make is not used. Normally, make is in the default system path.
GCC_HOST_BIN is not required to be set.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
In commit b6d5def2fa
when adding 'OUT' decorator for the parameter in AddUnicodeString(),
it delete the function name by mistake. This patch is to fix this
issue.
CC: Marvin Haeuser <Marvin.Haeuser@outlook.com>
CC: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The PeriodicSmiDispatchFunction() in SmmPeriodicSmiLib may assert
with "Bad CR signature".
Currently, the SetActivePeriodicSmiLibraryHandler() function
(invoked at the beginning of the PeriodicSmiDispatchFunction()
function) attempts to locate the PERIODIC_SMI_LIBRARY_HANDLER_CONTEXT
structure pointer for the current periodic SMI from a given
EFI_SMM_PERIODIC_TIMER_REGISTER_CONTEXT (RegiserContext) structure
pointer (using the CR macro).
The RegisterContext structure pointer passed to the
PeriodicSmiDispatchFunction() is assumed to point to the same
RegisterContext structure address given to the
SmmPeriodicTimerDispatch2 protocol Register() API in
PeriodicSmiEnable().
However, certain SmmPeriodicTimerDispatch2 implementation may copy
the RegisterContext to a local buffer and pass that address as the
context to PeriodicSmiDispatchFunction() in which case usage of the
CR macro to find the parent structure base fails.
The patch uses the LookupPeriodicSmiLibraryHandler() function to
find the PERIODIC_SMI_LIBRARY_HANDLER_CONTEXT structure pointer.
This works even in this scenario since the DispatchHandle returned
from the SmmPeriodicTimerDispatch2 Register() function uniquely
identifies that registration.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Virtio RNG devices are never boot devices, so in commit 245c643cc8 we
stopped connecting them. This is a problem because an OS boot loader may
depend on EFI_RNG_PROTOCOL to seed the OS's RNG.
Connect Virtio RNG devices again. And, while commit 245c643cc8 removed
that from PlatformBootManagerAfterConsole(), reintroduce it now to
PlatformBootManagerBeforeConsole() -- this way Driver#### options launched
between both functions may access EFI_RNG_PROTOCOL too.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: 245c643cc8
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1579518
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Virtio RNG devices are never boot devices, so in commit ff1d0fbfba we
stopped connecting them. This is a problem because an OS boot loader may
depend on EFI_RNG_PROTOCOL to seed the OS's RNG.
Connect Virtio RNG devices again. And, while commit ff1d0fbfba removed
that from PlatformBootManagerAfterConsole(), reintroduce it now to
PlatformBootManagerBeforeConsole() -- this way Driver#### options launched
between both functions may access EFI_RNG_PROTOCOL too.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: ff1d0fbfba
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1579518
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Then check for PCI_CLASS_DISPLAY_VGA using the new field.
This allows to enable/disable non-vga display classes per
card entry.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The PEIM in all cached FV image may be in registered for shadow status.
Current logic CurrentPeimFvCount is not enough.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The functions AddUnicodeString() and AddUnicodeString2() might return
a new value into their parameter UnicodeStringTable, hence add the
appropiate 'OUT' decorator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The functions AddUnicodeString() and AddUnicodeString2() might return
a new value into their parameter UnicodeStringTable, hence add the
appropiate 'OUT' decorator.
V2: Update FrameworkUefiLib as well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The UEFI PI specification defines PpiDescriptor to be OPTIONAL for
the LocatePpi PEI Service. This patch reflects this in the function
declaration and definition of the corresponding PeiServices library
function.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add link and version info for the referenced spec.
Cc: Jiewen yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Add link and version info for the referenced spec.
Cc: Jiewen yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
The order of List enumeration is arbitrary.
Need to be sorted while calculating Package/Module hash, otherwise it
generate different hash value even nothing changes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
For no warning message when do the PSID revert action, the
message in the popup dialog is not enough. The error use
of NULL for CreatePopUp function caused this regression.
This change fixed it.
Passed Unit Test:
1. Check PSID revert with/without warning message cases.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Function definition different with function implementation
caused this build failure. Change code to make them
consistent to pass the build.
Done Unit Test:
1. Pass GCC build.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
If both ConIn and ConOut exist, but ConIn references none of the PS/2
keyboard, the USB wild-card keyboard, and any serial ports, then
PlatformInitializeConsole() currently allows the boot to proceed without
any input devices at all. This makes for a bad user experience -- the
firmware menu could only be entered through OsIndications, set by a guest
OS.
Do what ArmVirtQemu does already, namely connect the consoles, and add
them to ConIn / ConOut / ErrOut, unconditionally. (The underlying
EfiBootManagerUpdateConsoleVariable() function checks for duplicates.)
The issue used to be masked by the EfiBootManagerConnectAll() call that
got conditionalized in commit 245c643cc8.
This patch is best viewed with "git show -b -W".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: 245c643cc8
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1577546
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
If Fvb is a NULL, return EFI_UNSUPPORTED.
If the remaining size is not enough, return EFI_OUT_OF_RESOURCES.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: cinnamon shia <cinnamon.shia@hpe.com>
Signed-off-by: Ansen Huang <ansen.huang@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Fix the issue that failed to update or add a UEFI variable if the remaining size is equal to the data size
of the variable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: cinnamon shia <cinnamon.shia@hpe.com>
Signed-off-by: Ansen Huang <ansen.huang@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When self.Alignment is None, it ran into python error since there is no
strip() in None.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
the ArraySize and Array already be got in line 1093, so this code are
redundant.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
V2:
Add function _INIT_OPHDR_COND () for variable initialization.
Make code logic more clean.
Previously _CLEAR_SAVED_OPHDR () is used for variable
initialization, and we updated it to clean memory.
But _CLEAR_SAVED_OPHDR () is still called for variable
initialization. This will cause uninitialized pointer
will be checked to free and cause unexpected issue.
This patch is to add new function for variable initialization
and keep _CLEAR_SAVED_OPHDR () to clean memory which is
aligned with its function name.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Gary Lin <glin@suse.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
RootBridgeIo.PollMem()/PollIo() originally don't count the IO/MMIO
access overhead when delaying.
The patch changes the implementation to count the access overhead
so that the actually delay equals to user required delay.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Certain Legacy USB implementation needs to access legacy data (BDA,
etc.) from SMM environment. While currently it's not allowed to
access BS memory from SMM after EndofDxe, change the legacy data
to use reserved memory type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The function SecStartup() is not supposed to return. Hence, add the
NORETURN decorator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The Fedora distro ships a modified OpenSSL 1.1.0 package stream. One of
their patches calls the secure_getenv() C library function. We already
have a stub for getenv(); it applies trivially to secure_getenv() as well.
Add the secure_getenv() stub so that edk2 can be built with Fedora's
OpenSSL 1.1.0 sources.
Cc: Qin Long <qin.long@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Long Qin <qin.long@intel.com>
AcpiPlatformDxe solely performs one-time tasks and does not expose
any services or create any events. Hence it can safely be unloaded
after the Entry Point execution by returning an error code.
V2: Return EFI_REQUEST_UNLOAD_IMAGE.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
If the capsule from command line is not present,
Buffer will be random value when freeing it in DumpCapsule(),
then ASSERT will happen or other memory pool may be freed.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
the commit bff74750 introduce a undefined variable name 'scope' cause build
failure, it should use 'Scope'.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
/D and -D flags have been added. So, /U and -U flags should be added.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
This patch is to add the instance of library class [SafeIntLib] to fix the
NetworkPkg build error, which is caused by the commit of 2167c7f7 that the
TlsLib will always consume SafeIntLib.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Long Qin <qin.long@intel.com>
Cc: Bi Dandan <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
This option, which is used in VS2015 and earlier toolchains, was missing
for VS2017. Applying it greatly reduces the size of generated binaries.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Commit eece4292ac changed a variable name, which was tied directly to
a config file entry. This seperates the internal variable names from
the config file entries by having the internal dict accessed through a
translation of key words.
added a test when this is run straight from command line.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
this class has a fucntion to share between Exception and RangeExpression
change both classes to call this function init in their init
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
currently GUID packing and pack size determination is spread
throughout the code. This introduces a shared function and dict and
routes all code paths through them.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
the function is only used in one other function.
just move it there.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
change methods which do not use self to @staticmethod
change their calls to use class name instead of instance
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
this serves no purpose since we dont change the global or assign to it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
add the API root in one class file.
delete the static API out of both classes.
share it in the single location.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
change methods which do not use self to @staticmethod
change their calls to use class name instead of instance
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
make this function @staticmethod since self parameter is not used.
change valuelist to valuedict since it is a dictionary.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
PCD size by type is shared so this change both removes duplication
and makes the function work for all numeric PCD types.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
According to UEFI spec, the RouteConfig protocol function should populate
the Progress pointer with an address inside Configuration. This patch
ensures that these functions are compliant when EFI_NOT_FOUND is returned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
According to UEFI spec, the RouteConfig protocol function should populate
the Progress pointer with an address inside Configuration. This patch
ensures that these functions are compliant when EFI_NOT_FOUND is returned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
According to UEFI spec, the RouteConfig protocol function should populate
the Progress pointer with an address inside Configuration. This patch
ensures that these functions are compliant when EFI_NOT_FOUND is returned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
According to UEFI spec, the RouteConfig protocol function should populate
the Progress pointer with an address inside Configuration. This patch
ensures that these functions are compliant when EFI_NOT_FOUND is returned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
According to UEFI spec, the RouteConfig protocol function should populate
the Progress pointer with an address inside Configuration. This patch
ensures that these functions are compliant when EFI_NOT_FOUND is returned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
According to UEFI spec, the RouteConfig protocol function should populate
the Progress pointer with an address inside Configuration. This patch
ensures that these functions are compliant when EFI_NOT_FOUND is returned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
According to UEFI spec, the RouteConfig protocol function should populate
the Progress pointer with an address inside Configuration. This patch
ensures that these functions are compliant when EFI_NOT_FOUND is returned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
According to UEFI spec, the RouteConfig protocol function should populate
the Progress pointer with an address inside Configuration. This patch
ensures that these functions are compliant when EFI_NOT_FOUND is returned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
inherently python will check string and list for None and having data
if <x> in [None, ''] and similar are superflous.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
BINARY_FILE_TYPE_FW was 'FW'
BINARY_FILE_TYPE_GUID was 'GUID'
BINARY_FILE_TYPE_PREEFORM was 'PREEFORM'
BINARY_FILE_TYPE_UEFI_APP was 'UEFI_APP'
BINARY_FILE_TYPE_UNI_UI was 'UNI_UI'
BINARY_FILE_TYPE_UNI_VER was 'UNI_VER'
BINARY_FILE_TYPE_LIB was 'LIB'
BINARY_FILE_TYPE_PE32 was 'PE32'
BINARY_FILE_TYPE_PIC was 'PIC'
BINARY_FILE_TYPE_PEI_DEPEX was 'PEI_DEPEX'
BINARY_FILE_TYPE_DXE_DEPEX was 'DXE_DEPEX'
BINARY_FILE_TYPE_SMM_DEPEX was 'SMM_DEPEX'
BINARY_FILE_TYPE_TE was 'TE'
BINARY_FILE_TYPE_VER was 'VER'
BINARY_FILE_TYPE_UI was 'UI'
BINARY_FILE_TYPE_BIN was 'BIN'
BINARY_FILE_TYPE_FV was 'FV'
v2 - split apart FV and GUID types with different meanings.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
EDK_COMPONENT_TYPE_LIBRARY was 'LIBRARY'
EDK_COMPONENT_TYPE_SECURITY_CORE was 'SECURITY_CORE'
EDK_COMPONENT_TYPE_COMBINED_PEIM_DRIVER was 'COMBINED_PEIM_DRIVER'
EDK_COMPONENT_TYPE_PIC_PEIM was 'PIC_PEIM'
EDK_COMPONENT_TYPE_RELOCATABLE_PEIM was 'RELOCATABLE_PEIM'
EDK_COMPONENT_TYPE_BS_DRIVER was 'BS_DRIVER'
EDK_COMPONENT_TYPE_RT_DRIVER was 'RT_DRIVER'
EDK_COMPONENT_TYPE_SAL_RT_DRIVER was 'SAL_RT_DRIVER'
EDK_COMPONENT_TYPE_APPLICATION was 'APPLICATION'
v2 - revert 2 files. will update later in own patches.
v3 - fix v2
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
replace raw strings in the code (note: except UPT) with constants.
SUP_MODULE_BASE was 'BASE'
SUP_MODULE_SEC was 'SEC'
SUP_MODULE_PEI_CORE was 'PEI_CORE'
SUP_MODULE_PEIM was 'PEIM'
SUP_MODULE_DXE_CORE was 'DXE_CORE'
SUP_MODULE_DXE_DRIVER was 'DXE_DRIVER'
SUP_MODULE_DXE_RUNTIME_DRIVER was 'DXE_RUNTIME_DRIVER'
SUP_MODULE_DXE_SAL_DRIVER was 'DXE_SAL_DRIVER'
SUP_MODULE_DXE_SMM_DRIVER was 'DXE_SMM_DRIVER'
SUP_MODULE_UEFI_DRIVER was 'UEFI_DRIVER'
SUP_MODULE_UEFI_APPLICATION was 'UEFI_APPLICATION'
SUP_MODULE_USER_DEFINED was 'USER_DEFINED'
SUP_MODULE_SMM_CORE was 'SMM_CORE'
SUP_MODULE_MM_STANDALONE was 'MM_STANDALONE'
SUP_MODULE_MM_CORE_STANDALONE was 'MM_CORE_STANDALONE'
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
make defaultdict to avoid initialize inner items
to empty the dict, call clear instead of making a new object
v2 - to empty the dict, dont re-run constructor, just call .clear()
in post process API also.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
This driver is used to simulate a keyboard. For example, user
could read GPIO setting or data from RAM address. If the value
matches the expected pattern, it could trigger a key pressed
event.
User needs to implement hooks of PLATFORM_VIRTUAL_KBD_PROTOCOL.
There're 4 hooks in this protocol.
Register(): Quote the interface that user needs. For example, user
needs to locate GPIO protocol if he wants to simulate a GPIO value
as a key.
Reset(): Do the initialization before reading value.
Query(): Read value. If the value matches the expected pattern,
trigger a key pressed event.
Clear(): Clean the value if necessary.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.c, the following
functions:
WatchdogWriteOffsetRegister()
WatchdogWriteCompareRegister()
WatchdogEnable()
WatchdogDisable()
provide write access to ARM Generic Watchdog registers and use the values
returned by MmioWrite32() and MmioWrite64() as EFI_STATUS return codes.
Because MmioWriteXY() return the value passed as its write parameter,
Generic Watchdog access functions can spuriously return error codes which
are different from EFI_SUCCESS, e.g. the following call
Status = WatchdogWriteOffsetRegister (MAX_UINT32);
if (EFI_ERROR (Status)) {
return Status;
}
will return MAX_UINT32 defined in MdePkg/Include/Base.h as
#define MAX_UINT32 ((UINT32)0xFFFFFFFF)
This commit declares all the functions listed above as VOID
and removes the code for checking their return values.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Alexei Fedorov <alexei.fedorov@arm.com>
Reviewed-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Port OvmfPkg commit 5c3481b0b6 to ArmVirtPkg. Some explanation should
be in order (because 5c3481b0b6 doesn't offer any):
- The UefiDevicePathLibDevicePathProtocol instance uses the Device Path
Utilities Protocol, produced by DevicePathDxe, for formatting and
parsing the textual device path representation. This allows for a
lighter weight lib instance that gets linked into several DXE modules.
In comparison, the more standalone UefiDevicePathLib instance includes
the formatting and parsing routines in every client module.
- The DXE core needs DevicePathLib before it dispatches DevicePathDxe, so
it needs to stick with the standalone instance.
- DevicePathDxe itself also needs the standalone instance, for
implementing the protocol.
- The DXE-phase PCD driver, "MdeModulePkg/Universal/PCD/Dxe/Pcd.inf",
depends on DevicePathLib via UefiLib and DxeServicesLib at the least; so
with this update, it inherits a dependency on the protocol. In reverse,
DevicePathDxe depends on the PCD Protocol, via PcdLib. The cycle is
broken by using BasePcdLibNull in DevicePathDxe. That restricts it to
FixedAtBuild, Patch, and FeatureFlag PCDs, but that's fine.
Example space savings (using ArmVirtQemu and the GCC5 toolchain):
- NOOPT: 187KB in FVMAIN, 12KB in FVMAIN_COMPACT
- DEBUG: 147KB in FVMAIN, 20KB in FVMAIN_COMPACT
- RELEASE: 123KB in FVMAIN, 17KB in FVMAIN_COMPACT
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=940
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Guests do the same, because the framebuffer is mapped somewhere, which
obviously works with page granularity only.
When not rounding up to full page size we get messages like this one
(linux kernel):
efifb: framebuffer at 0x80000000, using 1876k, total 1875k
^^^^^ ^^^^^
Also sysfb is confused and throws an error:
sysfb: VRAM smaller than advertised
Cc: Phil Dennis-Jordan <phil@philjordan.eu>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: fix coding style]
Remove any concrete OpenSSL version numbers from "OpenSSL-HOWTO.txt". That
information is out of date and there's no reason for us to refresh it:
We now track stable OpenSSL releases via a git submodule. CryptoPkg
maintainers push such submodule updates to edk2 that identify the correct
stable releases of OpenSSL. "OpenSSL-HOWTO.txt" already provides
instructions to users for updating their local submodules.
Cc: Qin Long <qin.long@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Long Qin <qin.long@intel.com>
the function doesn't use self and can be static
defaultdict replaces dict and removes the dict initialization code
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Commit 411a373ed6 ("ArmPkg/TimerDxe: remove workaround for KVM timer
handling") removed the virtual timer handling quirk that cleared the
mask bit in the control register when enabling the timer, under the
assumption that only ancient KVM host implementations required it.
However, Julien reports that Xen also masks the timer interrupt in the
guest view of the timer control register, and therefore needs the same
quirk.
So let's reinstate it, but using a Xen specific implementation of the
timer support library, so that other virt platforms remain unchanged.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Acked-by: Julien Grall <julien.grall@arm.com>
In preparation of selectively reinstating the timer enable quirk for Xen
that we removed in commit 411a373ed6 ("ArmPkg/TimerDxe: remove workaround
for KVM timer handling"), add a ArmGenericTimerReenableTimer() library
function to ArmGenericTimerCounterLib that we will populate for Xen only.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Acked-by: Julien Grall <julien.grall@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=937
In NvmeExpressPassthru.c near line 659:
Prp = NvmeCreatePrpList (
PciIo,
PhyAddr,
EFI_SIZE_TO_PAGES(Offset + Bytes) - 1,
&PrpListHost,
&PrpListNo,
&MapPrpList
);
if (Prp == NULL) {
goto EXIT;
}
Status is not set to an error code - Status is initialized to
EFI_SUCCESS, or set by a PciIo->Map to EFI_SUCCESS above this
code. This error path should set Status to an error code before
goto EXIT.
Change-Id: I8a5cdf981aa609534c205d3676395805ac60a003
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=933
We see UEFI spec is saying to use EfiBootServicesData for ESRT table.
UEFI 2.7 chapter 23.3:
The ESRT shall be stored in memory of type EfiBootServicesData.
And we see EsrtDxe is using AllocatePool for ESRT table, but
EsrtFmpDxe is using AllocateRuntimeZeroPool for ESRT table.
This patch updates code to use EfiBootServicesData for ESRT table
in EsrtFmpDxe.
Change-Id: I72a73e0cc0a37e429cc262d68eb284fb268cb5ef
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Add the new section for HTTPS Boot.
Changes in v2:
- Fixed the typos
- Added the command for p11-kit based on Laszlo's suggestion
- Also added the efisiglist command
- Elaborated how to create the customized cipher suite list
- Mentioned the changes in QEMU in the future based on Laszlo's
suggestion
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: trivial typo fixes; update-crypto-policies URL fix]
This change introduces a new SCMI protocol driver for
Arm systems. The driver currently supports only clock
and performance management protocols. Other protocols
will be added as and when needed.
Clock management protocol is used to configure various clocks
available on the platform e.g. HDLCD clock on the Juno platforms.
Whereas performance management protocol allows adjustment
of various performance domains. Currently this is used to evaluate
performance of the Juno platform.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Upcoming new component ArmPkg/Drivers/ArmScmiDxe is dependent on
platform specific ArmMtlLib library implementation, however in order
to be able to build the ArmScmiDxe component outside of the context of a
particular platform, this change adds Null implementation of the
ArmMtlLib along with ARM MTL library header.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This change adds support for the ARM Mali DP500/DP500/DP650 display
processors using the GOP protocol. It has been tested on FVP base
models + DP550 support. This change adds platform independant LcdHwLib
library. A corresponding platform specific library will be submitted
to edk-platforms/Platform/ARM/VExpressPkg.
This change does not modify functionality provided by PL111 or
HDLCD. This LcdHwLib implementation should be suitable for those
platforms that implement ARM Mali DP500/DP550/DP650 replacing
PL111/HDLCD.
Only graphics layer of the ARM Mali DP is configured for rendering
the RGB/BGR format frame buffer to satisfy the UEFI GOP requirements
Other layers e.g. video layers are not configured.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Currently framebuffer memory is either reserved in special VRAM or
dynamically allocated using boot services memory allocation functions.
When allocated using boot services calls the memory has to be allocated
as EfiBootServicesData. Unfortunately failures have been seen with this
case. There is also an unfortunate lack of control on the placement of
the framebuffer.
This change introduces two PCDs, PcdArmLcdFrameBufferBase and
PcdArmLcdFrameBufferSize which enable build time reservation of the
framebuffer, avoiding the need to allocate dynamically. This allows
the framebuffer to appear as "I/O memory" outside of the normal RAM
map, which is similar to the "VRAM" case.
This change has no impact on current code, only enables the option
of build time reservation of framebuffers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Add definitions for new display modes such as HD 720.
This has no effect on existing display drivers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This change adds a new PCD PcdArmHdlcdSwapBlueRedSelect
to swap values for HDLCD RED_SELECT and BLUE_SELECT registers
on platforms where blue and red hardware lines are swapped.
If set to TRUE in the platform dsc, HDLCD library will swap the values
while setting RED_SELECT and BLUE_SELECT registers. The default
value of the PCD is FALSE.
NOTE: The motive for this is that a discrepancy in the Red/Blue lines
exists between some VersatileExpress platforms. Rather than have
divergent code, this build switch allows a simple, pragmatic solution.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Current HDLCD and PL111 platform libraries do not support display modes
with PixelBlueGreenRedReserved8BitPerColor format, i.e. because of
historical confusion, they do not support the UEFI default
PixelBlueGreenRedReserved8BitPerColor format
In LcdPlatformLib for PL111, LcdPlatformQueryMode returns the pixel
format as PixelRedGreenBlueReserved8BitPerColor which is wrong, because
that does not match the display controller's pixel format which is set
to BGR in PL111Lcd LcdHwLib.
Also it is not possible to configure pixel format as RGB/BGR for the
display modes for a platform at build time.
This change adds PcdGopPixelFormat to configure pixel format as
PixelRedGreenBlueReserved8BitPerColor or
PixelBlueGreenRedReserved8BitPerColor or
PixelBitMask.
With this change, pixel format can be selected in the platform specific
.dsc file for all supported display modes.
Support for PixelBitMask is not implemented in PL111 or HDLCD LcdHwLib
libraries, hence HDLCD and PL111 platform libraries will return error
EFI_UNSUPPORTED if PcdGopPixelFormat is set to PixelBitMask. Indeed,
it is not clear what selecting PixelBitMask might mean, but the option
is allowed as it might suit a custom platform.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The LcdPlatformGetTimings interface function takes similar sets of
multiple parameters for horizontal and vertical timings which can be
aggregated in a common data type. This change defines a structure
SCAN_TIMINGS for this which can be used to describe both horizontal and
vertical scan timings, and accordingly redefines the
LcdPlatformGetTiming interface, greatly reducing the amount of data
passed about.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
LcdIdentify function does not currently check presence of HDLCD
controller.
Implement this functionality by reading HDLCD_REG_VERSION and checking
against the PRODUCT_ID field to detect presence of HDLCD controller.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Currenty bit LcdPwr of the LCDControl register is enabled immediately
after setting other bits of the LCDControl register. This two write
sequence is unnecessary. This change removes this extra write by setting
LcdPwr bit along with other bits of the LcdControl register.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
There is no functional modification in this change
some comments are modified and a few new comments are added.
This is to prevent mixing formatting changes with functional
changes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
There is no functional modification in this change
As preparation for further work, the formatting is corrected to meet
the EDKII coding standard.
Of specific note, some invalid include guards were fixed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This fix changes line endings of LcdPlatformNullLib.c to DOS
style line endings from UNIX style line endings to meet the EDK2
coding standard.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This fix changes line endings of LcdHwNullLib.c to DOS
style line endings from UNIX style line endings to meet the
EDK2 coding standard. Note it also fixes an end of line
whitespace.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This program is provided to allow examination of ACPI table contents
from the UEFI Shell. This can help with investigations, especially at
that stage where the tables are not enabling an OS to boot.
The program is not exhaustive, and only encapsulates detailed knowledge
of a limited number of table types.
Default behaviour is to display the content of all tables installed.
'Known' table types will be parsed and displayed with descriptions and
field values. Where appropriate a degree of consistency checking is
done and errors may be reported in the output.
Other table types will be displayed as an array of Hexadecimal bytes.
To facilitate debugging, the -s and -d options can be used to generate a
binary file image of a table that can be copied elsewhere for
investigation using tools such as those provided by acpica.org. This is
especially relevant for AML type tables like DSDT and SSDT.
The inspiration for this is the existing smbiosview Debug1 Shell
command.
Many tables are not explicitly handled, in part because no examples are
available for our testing.
The program is designed to be extended to new tables with minimal
effort, and contributions are invited.
Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Clean up the leading comment and the prototype of
EfiBootManagerAddLoadOptionVariable():
- the function may modify Option on output, annotate the parameter with
OUT and update the documentation;
- "@retval EFI_STATUS" and "@retval Others" are not idiomatic
documentation, use @return instead;
- sync comment and prototype between lib instance and lib class header.
Change-Id: I8a609d6502b6f8929b2f568acaa147065003b6f4
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
PcdRsa2048Sha256PublicKeyBuffer is referenced but not used in the
library, that makes me a little confusing.
Actually, the PublicKeyData should be from the caller of
AuthenticateFmpImage() as input parameter, for example
EdkiiSystemCapsuleLib.
This patch is to remove the PCD reference in this library instance
to be aligned with FmpAuthenticationLibPkcs7 that does not reference
PcdPkcs7CertBuffer.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Today's implementation only return key state when there is key.
But when user doesn't press any key, the key state cannot be
returned.
The patch changes the ReadKeyStrokeEx() to always return the
key state even there is no key pressed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When we first ported EDK2 to KVM/arm, we implemented a workaround for
the quirky timer handling on the KVM side. This has been fixed in
Linux commit f120cd6533d2 ("KVM: arm/arm64: timer: Allow the timer to
control the active state") dated 23 June 2014, which was incorporated
into Linux release 4.3.
So almost 4 years later, it should be safe to drop this workaround on
the EDK2 side.
This reverts commit b1a633434d.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Within function FatQueueTask(), the traverse of FAT subtasks for
executing the disk read/write is not delete-safe.
For the below case:
FatDiskIo(): When non-blocking access, creates subtasks and creates
event (FatOnAccessComplete, NOTIFY level) when subtasks finish.
FatQueueTask(): Traverses the subtasks and submits them one by one at
Tpl lower than NOTIFY.
Disk R/W completes really quick.
FatOnAccessComplete(): Removes the finished subtask, causing the
traverse in FatQueueTask() broken.
This commits will refine the subtask traverse in FatQueueTask() to be
delete-safe.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
To align the way in MdeModulePkg SerialPortLib and PciSioSerialDxe driver,
Divisor is added by one when the reminder is more than half (16 * BaudRate).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
when comparing a list/string against None and empty, just compare the object.
when comparing against None, dont use !=, ==, <>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
PlatformInitializeConsole() (called by PlatformBootManagerBeforeConsole())
adds elements of "gPlatformConsole" to ConIn / ConOut / ErrOut (as
requested per element) if at boot at least one of ConIn and ConOut doesn't
exist. This typically applies to new VMs, and VMs with freshly recreated
varstores.
Add a USB keyboard wildcard to ConIn via "gPlatformConsole", so that we
not only bind the PS/2 keyboard. (The PS/2 keyboard is added in
PrepareLpcBridgeDevicePath()). Explicitly connecting the USB keyboard is
necessary after commit 245c643cc8.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
We have updated performance infrastructure in previous commits:
between
73fef64f14
and
115eae650b
Update FPDT drivers to collect the performance data reported by
gEdkiiFpdtExtendedFirmwarePerformanceGuid.
The old implementation which collected performance data through
gEfiFirmwarePerformanceGuid is not supported now.
We should add error message to remind user for this unsupported
case in case anyone use it by mistake.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
d69d9227d0 caused system firmware update
failure. It is because FindMatchingFmpHandles() is expected to return
handles matched, but the function returns all handles found.
This patch is to fix the issue.
This patch also assigns mSystemFmpPrivate->Handle for "case 1:" path
in case the Handle is needed by other place in future.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
(https://bugzilla.tianocore.org/show_bug.cgi?id=927)
(V2 Update:
Removing the wrong "--remote" option from git submodule update
command in this commit message. Thanks Laszlo's clarification
to correct this)
Update OpenSSL version to 1.1.0h release (27-Mar-2018) to include the
fix for CVE-2018-0739 issue (Handling of crafted recursive ASN.1
structures can cause a stack overflow and resulting denial of service,
Refer to https://www.openssl.org/news/secadv/20180327.txt for more
information).
Please note "git pull" will not update the submodule repository.
use the following commend to make your existing submodule track this
update:
$ git submodule update --recursive
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Long Qin <qin.long@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
This patch is to drop "--remote" option from the original suggested
submodule update command ("$ git submodule update --recursive
--remote") in HOWTO document.
"--remote" option will integrate changes from the upstream subproject
with the submodules's "current HEAD", instead of using the edk2
superproject's "recorded SHA-1".
It is important here for the edk2 consumers to updating the working
tree of the submodules to match the commit / release tag that the
superproject expects. So removing "--remote" option to fix this
documentation issue here.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Long Qin <qin.long@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Rewrite the TlsSetCipherList() function in order to fix the following
issues:
- Any cipher identifier in CipherId that is not recognized by
TlsGetCipherMapping() will cause the function to return EFI_UNSUPPORTED.
This is a problem because CipherId is an ordered preference list, and a
caller should not get EFI_UNSUPPORTED just because it has an elaborate
CipherId preference list. Instead, we can filter out cipher identifiers
that we don't recognize, as long as we keep the relative order intact.
- CipherString is allocated on the stack, with 500 bytes.
While processing a large CipherId preference list, this room may not be
enough. Although no buffer overflow is possible, CipherString exhaustion
can lead to a failed TLS connection, because any cipher names that don't
fit on CipherString cannot be negotiated.
Compute CipherStringSize first, and allocate CipherString dynamically.
- Finally, the "@STRENGTH" pseudo cipher name is appended to CipherString.
(Assuming there is enough room left in CipherString.) This causes
OpenSSL to sort the cipher list "in order of encryption algorithm key
length".
This is a bad idea. The caller specifically passes an ordered preference
list in CipherId. Therefore TlsSetCipherList() must not ask OpenSSL to
reorder the list, for any reason. Drop "@STRENGTH".
While at it, fix and unify the documentation of the CipherId parameter.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Qin Long <qin.long@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=915
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
"InternalTlsLib.h" includes "BaseCryptLib.h", but the lib class is not
listed in the INF file.
The INF file lists a good number of lib classes, but none of the lib class
headers are included by "InternalTlsLib.h".
Synchronize & sort both lists, while removing those library classes that
aren't actually needed. (IntrinsicLib and OpensslLib have no edk2 class
headers.)
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Qin Long <qin.long@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=915
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
In the next patches, we'll need the lengths of the
TLS_CIPHER_MAPPING.OpensslCipher string fields. These lengths can be
computed at build time; add the new field "OpensslCipherLength", and
introduce the MAP() macro for populating it.
While at it, add some horizontal whitespace to "TlsCipherMappingTable",
and add a comma after the last element. This will come handy in a later
patch.
(The patch does not change the first two columns of
"TlsCipherMappingTable", which can be easily verified with "git show
--word-diff".)
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Qin Long <qin.long@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=915
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
In the following patches it will be useful if the IANA CipherId lookup
returns a pointer to the whole matching IANA-to-OpenSSL mapping structure,
not just the OpenSSL cipher suite name. Rename TLS_CIPHER_PAIR and
TlsGetCipherString() to TLS_CIPHER_MAPPING and TlsGetCipherMapping()
respectively, and make the function return a pointer to
TLS_CIPHER_MAPPING.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Qin Long <qin.long@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=915
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Fix the following style issues:
- "Data" is accessed through a pointer to UINT16 rather than to a pointer
to EFI_TLS_CIPHER. While technically correct, UINT16 is harder to
interpret against the UEFI spec.
- Array subscripting is written with weird *(Pointer + Offset)
expressions, rather than with Pointer[Offset].
- The byte order is converted with HTONS(), while it should be NTOHS().
Either way, use the Data1 and Data2 fields of EFI_TLS_CIPHER instead.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=915
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
TlsSetSessionData() shouldn't just ignore an incomplete EFI_TLS_CIPHER
element at the end of "Data":
- Generally speaking, malformed input for a security API is best rejected
explicitly.
- Specifically speaking, the size of EFI_TLS_CIPHER is 2 bytes. If
DataSize is 1 on input, then the initial check for (DataSize == 0) will
fail, but then TlsSetCipherList() will be called with CipherNum=0.
Return EFI_INVALID_PARAMETER from TlsSetSessionData() if "Data" doesn't
contain a whole number of EFI_TLS_CIPHER elements. While at it, introduce
the dedicated variable CipherCount.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=915
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Read the list of trusted cipher suites from fw_cfg and to store it to
EDKII_HTTP_TLS_CIPHER_LIST_VARIABLE.
The fw_cfg file will be formatted by the "update-crypto-policies" utility
on the host side, so that the host settings take effect in guest HTTPS
boot as well. QEMU forwards the file intact to the firmware. The contents
are forwarded by NetworkPkg/HttpDxe (in TlsConfigCipherList()) to
NetworkPkg/TlsDxe (TlsSetSessionData()) and TlsLib (TlsSetCipherList()).
Note: the development of the "update-crypto-policies" feature is underway
at this time. Meanwhile the following script can be used to generate the
binary file for fw_cfg:
export LC_ALL=C
openssl ciphers -V \
| sed -r -n \
-e 's/^ *0x([0-9A-F]{2}),0x([0-9A-F]{2}) - .*$/\\\\x\1 \\\\x\2/p' \
| xargs -r -- printf -- '%b' > ciphers.bin
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
[lersek@redhat.com: update commit msg and add script as requested by Gary]
[lersek@redhat.com: update commit msg as requested by Jiaxin]
This patch fixes an issue introduced by commit
5b91bf82c6
and
0c9f2cb10b
This issue will only happen if PcdDxeNxMemoryProtectionPolicy is
enabled for reserved memory, which will mark SMM RAM as NX (non-
executable) during DXE core initialization. SMM IPL driver will
unset the NX attribute for SMM RAM to allow loading and running
SMM core/drivers.
But above commit will fail the unset operation of the NX attribute
due to a fact that SMM RAM has zero cache attribute (MRC code always
sets 0 attribute to reserved memory), which will cause GCD internal
method ConverToCpuArchAttributes() to return 0 attribute, which is
taken as invalid CPU paging attribute and skip the calling of
gCpu->SetMemoryAttributes().
The solution is to make use of existing functionality in PiSmmIpl
to make sure one cache attribute is set for SMM RAM. For performance
consideration, PiSmmIpl will always try to set SMM RAM to write-back.
But there's a hole in the code which will fail the setting write-back
attribute because of no corresponding cache capabilities. This patch
will add necessary cache capabilities before setting corresponding
attributes.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Heap Guard feature needs enough memory and paging to work. Otherwise
calling SetMemoryAttributes to change page attribute will fail. This
patch add necessary check of result of calling SetMemoryAttributes.
This can help users to debug their problem in enabling this feature.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Heap Guard feature needs enough memory and paging to work. Otherwise
calling SetMemoryAttributes to change page attribute will fail. This
patch add necessary check of result of calling SetMemoryAttributes.
This can help users to debug their problem in enabling this feature.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This debug message should be info instead of error. This patch is to
change the debug level to DEBUG_INFO.
DEBUG((DEBUG_ERROR, "checking FV....0x%08x - 0x%x\n",
FvHeader, FvHeader->FvLength)); // "Mark"
This comment is inaccurate. This patch is to remove it.
//
// Check section
//
This debug message should be removed as FvHeader may have been out of
range FdStart and FdSize, and the loop will go to "Mark" above again if
FvHeader is not out of range FdStart and FdSize, and then that debug
message will be shown. This patch is to remove this debug message.
DEBUG((DEBUG_ERROR, "Next FV....0x%08x - 0x%x\n",
FvHeader, FvHeader->FvLength));
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Amy Chan <amy.chan@intel.com>
Cc: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In spite of both ArmVirtQemu and ArmVirtQemuKernel formatting the variable
store template at build time, link NvVarStoreFormattedLib into
VariableRuntimeDxe via NULL class resolution on both platforms. This lets
us test the depexes implemented in the previous patches.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
PlatformHasAcpiDtDxe consumes the DynamicHii PCD called
"gArmVirtTokenSpaceGuid.PcdForceNoAcpi". The PcdGetBool() library call
terminates in gRT->GetVariable(), in the MdeModulePkg/Universal/PCD/Dxe
driver. Put "gEfiVariableArchProtocolGuid" on PlatformHasAcpiDtDxe's DEPEX
so that we not attempt the call before the PCD driver can successfully
read non-volatile variables.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The RealTimeClockLib class is declared under EmbeddedPkg, so that
platforms can provide the internals for the
EmbeddedPkg/RealTimeClockRuntimeDxe driver. In turn the driver produces
the Real Time Clock Arch Protocol, without which UEFI drivers cannot be
dispatched.
The PL031RealTimeClockLib instance calls gDS->SetMemorySpaceAttributes()
in the LibRtcInitialize() public function. This DXE service depends on the
CPU Arch Protocol. Add it to the depex.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
NorFlashFvbInitialize() calls gDS->SetMemorySpaceAttributes() to mark the
varstore flash region as uncached. This DXE service depends on the CPU
Architectural protocol, and the DXE core is allowed to return
EFI_NOT_AVAILABLE_YET if it hasn't dispatched ArmPkg/Drivers/CpuDxe
earlier. Make the dependency explicit.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The BEFORE depex opcode that we currently use to force ourselves in front
of the variable driver cannot be combined with other depex opcodes.
Replace the depex with TRUE, and signal NvVarStoreFormattedLib through the
installation of "gEdkiiNvVarStoreFormattedGuid".
Platforms that rely on NorFlashDxe to format the variable store (as
opposed to formatting a variable store template through an FDF file, as
part of the build) should hook NvVarStoreFormattedLib into the variable
drivers they use, so that the latter await our cue.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The lazy initialization of the varstore FVB makes no longer sense at this
point:
- "mNorFlashInstanceTemplate.Initialize" is NULL;
- in NorFlashCreateInstance(), we only set Instance->Initialize to
non-NULL -- namely NorFlashFvbInitialize() -- if the FVB stands for the
variable store (see "ContainVariableStorage" / "SupportFvb");
- we call Instance->Initialize() from three places:
- from NorFlashWriteSingleBlock(), which is too late for the variable
read service ("variable write" depends on "variable read");
- from InitializeFvAndVariableStoreHeaders(), but that is only reachable
from NorFlashFvbInitialize(), i.e. recursively from
Instance->Initialize() itself;
- and from FvbRead(), which is never called by the variable driver, only
by the FTW driver. However, the variable driver may read (not write)
the memory-mapped varstore flash chip before the FTW driver is
dispatched.
Therefore the lazy initialization is both superfluous and insufficient.
Initialize the varstore headers eagerly, before we install the FVB
protocol interface.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Some platforms don't format a variable store template at build time;
instead they format the non-volatile varstore flash chip during boot,
dynamically. Introduce NvVarStoreFormattedLib to enable such platforms to
delay the "variable read" service drivers until the platform specific
module(s) report that the variable store has been formatted.
The platform-specific module that performs the formatting during startup
is usually an FVB or MM FVB driver. Under the proposed scheme, it becomes
responsible for installing gEdkiiNvVarStoreFormattedGuid with a NULL
interface in the protocol database. In turn, the platform DSC will hook
NvVarStoreFormattedLib into the variable service driver, to make the
latter wait for the FVB driver. Platforms that need not delay the variable
service driver like this may still use the same FVB driver;
gEdkiiNvVarStoreFormattedGuid will simply be ignored.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Commit 61a7b0ec63 ("ArmPkg/Gic: force GIC driver to run before CPU arch
protocol driver", 2018-02-06) explains why CpuDxe should be dispatched
after ArmGicDxe.
To implement the ordering, we should use a regular protocol depex rather
than the less flexible AFTER opcode. ArmGicDxe installs
gHardwareInterruptProtocolGuid and gHardwareInterrupt2ProtocolGuid as one
of the last actions on its entry point stack; either of those is OK for
CpuDxe to wait for.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
"ArmGicDxe.inf" currently does not document how the protocols in the
[Protocols] section are used. Such comments help us analyze behavior, so
let's add them now.
- gHardwareInterruptProtocolGuid and gHardwareInterrupt2ProtocolGuid are
always produced on the InterruptDxeInitialize() -> (GicV2DxeInitialize()
| GicV3DxeInitialize()) -> InstallAndRegisterInterruptService() call
path.
- gEfiCpuArchProtocolGuid is consumed in the CpuArchEventProtocolNotify()
protocol notify callback. (Technically this is "conditional"; however
the firmware cannot work without architectural protocols, so we can call
it unconditional.)
While at it, drop the gArmGicDxeFileGuid comment from FILE_GUID; we're
going to make that GUID uninteresting soon.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In a later patch, we'll modify the depex of
"ArmPkg/Drivers/CpuDxe/CpuDxe.inf" (currently "AFTER gArmGicDxeFileGuid")
to "gHardwareInterruptProtocolGuid OR gHardwareInterrupt2ProtocolGuid".
Considering platforms that include "ArmPkg/Drivers/CpuDxe/CpuDxe.inf",
there are two classes:
(1) The platform gets its gHardwareInterruptProtocolGuid or
gHardwareInterrupt2ProtocolGuid instance from
"ArmPkg/Drivers/ArmGic/ArmGicDxe.inf". For such platforms, the
upcoming CpuDxe change is not a problem, because commit 61a7b0ec63
made ArmGicDxe wait for the CPU Arch Protocol with a protocol notify.
(2) The platform gets its hardware interrupt protocol(s) from a different
driver that has a hard depex on the CPU Arch Protocol. The upcoming
CpuDxe change would lead to a loop in the DXE dispatch order.
In the edk2 tree, only "BeagleBoardPkg/BeagleBoardPkg.dsc" falls in class
(2), and the driver in question is "Omap35xxPkg/InterruptDxe". Port (most
of) commit 61a7b0ec63 to it.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
https://bugzilla.tianocore.org/show_bug.cgi?id=928
Uninstall all System FMP Protocols for the current FW device.
If an FMP Protocol for the current FW device is already present,
then install the new System FMP protocol onto the same handle as
the FMP Protocol. Otherwise, install the FMP protocol onto a
new handle.
This supports use cases where multiple capsules for the
same system firmware device are processed on the same
boot of the platform. It guarantees there is at most one
FMP protocol for each system firmware device.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
1. when inf file is binary module, not generate makefile,
so need generate ffs with previous method.
2. generate Ui section maybe override and the string is not
$(MODULE_NAME)
like as:
INF RuleOverride = UI MdeModulePkg/Application/UiApp/UiApp.inf
3. Trim generate incorrect Offset.raw when some vfr not generate .lst
file in Debug directory, Trim get the VFR name with the .c files
replacement.
4. fix some depex file not generate issue
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Issue:
genfds-multi-thread create makefile before section file generation,
so it get alignment is zero from empty file. It is incorrect.
solution:
GenSec get section alignment from input file when the input alignment
is zero.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Roll back the fixed at build pcd collection to include the pcd in
Module and Library.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BLOCK_MMIO_PROTOCOL and BlockMmioToBlockIoDxe were introduced to OvmfPkg
in March 2010, in adjacent commits b0f5144676 and efd82c5794. In the
past eight years, no driver or application seems to have materialized that
produced BLOCK_MMIO_PROTOCOL instances. Meanwhile the UEFI spec has
developed the EFI_RAM_DISK_PROTOCOL, which edk2 implements (and OVMF
includes) as RamDiskDxe.
Rather than fixing issues in the unused BlockMmioToBlockIoDxe driver,
remove the driver, together with the BLOCK_MMIO_PROTOCOL definition that
now becomes unused too.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=926
Reported-by: Steven Shi <steven.shi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
1. use CName format in components section:
[Components]
TestPkg/TestDriver.inf {
<PcdsFixedAtBuild>
PcdToken.PcdName |{GUID(TestGuid)}|VOID*|16
}
2. Use Guid CName format in INF and the Guid is defined in the DEC
file but not write in driver's [Guids] section.
PcdToken.PcdName | {GUID(TestGuid)}
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When the Pcd defined in components section, its value's size is larger
than the value's size in [pcd] section, it cause build error, because
original code use the size get in [pcd] section as max size.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
when multiple driver link same library, and the drivers override the pcd
to different value in the DSC component section, it cause the pcd size
incorrect.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
when driver link library and there have pcd override in DSC component
section, in the library autogen file, the pcd's size is incorrect, the
size value is from DSC [pcd] section, but not from the override pcd
value that in the [component] section.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The case is a FixedAtBuild VOID* PCD is used from a lib, but is set to a
different sized value in a module INF scope <PcdsFixedAtBuild> section.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
FDF format as below:
FILE APPLICATION = PCD(PcdToken.PcdCName) {
}
when parse PCD, need get all PCDs from Platform and Packages,
use self.BuildObject[self.Platform, Arch] get some modules is wrong.
so use self.BuildObject[self.Platform, Arch, TargetName, ToolChainTag]
get all modules.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
switch list to set:
1)we dont care about order
2)we only check for membership.
then remove ".keys()" from dict looping:
allow generators opportunity to optimize
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
The Pcd used in [Components] section, the PCD value is displayed
incorrect in the build report because the PCD default value was not
override.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Pcds in Conditional Directives and Pcds not used are Platform Level
info, it should not display in Module PCD Section.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
by changing from list to set(), we can skip all the preprocessing
to prevent duplication and we dont need to convert to a set() later
on for each use
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
we initialize this dict and then check it's contents, but never add items.
we can remove it without any effect.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
This patch fixes an issue with VlvTbltDevicePkg introduced
by commit 5b91bf82c6.
The history is as below.
To support heap guard feature, 14dde9e903
added support for SetMemorySpaceAttributes() to handle page attributes,
but after that, a combination of CPU arch attributes and other attributes
was not allowed anymore, for example, UC + RUNTIME. It is a regression.
Then 5b91bf82c6 was to fix the regression,
and we thought 0 CPU arch attributes may be used to clear CPU arch
attributes, so 0 CPU arch attributes was allowed to be sent to
gCpu->SetMemoryAttributes().
But some implementation of CPU driver may return error for 0 CPU arch
attributes. That fails the case that caller just calls
SetMemorySpaceAttributes() with none CPU arch attributes (for example,
RUNTIME), and the purpose of the case is not to clear CPU arch attributes.
This patch filters the call to gCpu->SetMemoryAttributes()
if the requested attributes is 0. It also removes the #define
INVALID_CPU_ARCH_ATTRIBUTES that is no longer used.
Cc: Heyi Guo <heyi.guo@linaro.org>
Cc: Yi Li <phoenix.liyi@huawei.com>
Cc: Renhao Liang <liangrenhao@huawei.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
NASM introduced FXSAVE / FXRSTOR support in commit 900fa5b26b8f ("NASM
0.98p3-hpa", 2002-04-30), which commit stands for the nasm-0.98p3-hpa
release.
NASM introduced FXSAVE64 / FXRSTOR64 support in commit 3a014348ca15
("insns: add FXSAVE64/FXRSTOR64, drop np prefix", 2010-07-07), which was
part of the "nasm-2.09" release.
Edk2 requires nasm-2.10 or later for use with the GCC toolchain family,
and nasm-2.12.01 or later for use with all other toolchain families.
Replace the binary encoding of the FXSAVE(64)/FXRSTOR(64) instructions
with mnemonics.
I verified that the "Ia32/SmiException.obj", "X64/SmiEntry.obj" and
"X64/SmiException.obj" files are rebuilt after this patch, without any
change in content.
This patch removes the last instructions encoded with DBs from
PiSmmCpuDxeSmm.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(1) SmmRelocationSemaphoreComplete32() runs in 32-bit mode, so wrap it in
a (BITS 32 ... BITS 64) bracket.
(2) SmmRelocationSemaphoreComplete32() currently compiles to:
> 000002AE C6050000000001 mov byte [dword 0x0],0x1
> 000002B5 FF2500000000 jmp dword [dword 0x0]
where the first instruction is patched with the contents of
"mRebasedFlag" (so that (*mRebasedFlag) is set to 1), and the second
instruction is patched with the address of
"mSmmRelocationOriginalAddress" (so that we jump to
"mSmmRelocationOriginalAddress").
In its current form the first instruction could not be patched with
PatchInstructionX86(), given that the operand to patch is not encoded
in the trailing bytes of the instruction. Therefore, adopt an
EAX-based version, inspired by both the IA32 and X64 variants of
SmmRelocationSemaphoreComplete():
> 000002AE 50 push eax
> 000002AF B800000000 mov eax,0x0
> 000002B4 C60001 mov byte [eax],0x1
> 000002B7 58 pop eax
> 000002B8 FF2500000000 jmp dword [dword 0x0]
Here both instructions can be patched with PatchInstructionX86(), and
the DBs can be replaced with native NASM syntax.
(3) Turn the "mRebasedFlagAddr32" and "mSmmRelocationOriginalAddressPtr32"
variables into markers that suit PatchInstructionX86().
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Rename the variable to "gPatchSmmInitStack" so that its association with
PatchInstructionX86() is clear from the declaration, change its type to
X86_ASSEMBLY_PATCH_LABEL, and patch it with PatchInstructionX86(). This
lets us remove the binary (DB) encoding of some instructions in
"SmmInit.nasm".
The size of the patched source operand is (sizeof (UINTN)).
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The IA32 version of "SmmInit.nasm" does not need "gSmmJmpAddr" at all (its
PiSmmCpuSmmInitFixupAddress() variant doesn't do anything either). We can
simply use the NASM syntax for the following Mixed-Size Jump:
> jmp PROTECT_MODE_CS : dword @32bit
The generated object code for the instruction is unchanged:
> 00000182 66EA5A0000000800 jmp dword 0x8:0x5a
(The NASM manual explains that putting the DWORD prefix after the colon
":" reflects the intent better, since it is the offset that is a DWORD.
Thus, that's what I used. However, both syntaxes are interchangeable,
hence the ndisasm output.)
The X64 version of "SmmInit.nasm" appears to require "gSmmJmpAddr";
however that's accidental, not inherent:
- Bring LONG_MODE_CODE_SEGMENT from
"UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h" to "SmmInit.nasm" as
LONG_MODE_CS, same as PROTECT_MODE_CODE_SEGMENT was brought to the IA32
version as PROTECT_MODE_CS earlier.
- Apply the NASM-native Mixed-Size Jump syntax again, but jump to the
fixed zero offset in LONG_MODE_CS. This will produce no relocation
record at all. Add a label after the instruction.
- Modify PiSmmCpuSmmInitFixupAddress() to patch the jump target backwards
from the label. Because we modify the DWORD offset with a DWORD access,
the segment selector is unharmed in the instruction, and we need not set
it from PiCpuSmmEntry().
According to "objdump --reloc", the X64 version undergoes only the
following relocations, after this patch:
> RELOCATION RECORDS FOR [.text]:
> OFFSET TYPE VALUE
> 0000000000000095 R_X86_64_PC32 SmmInitHandler-0x0000000000000004
> 00000000000000e0 R_X86_64_PC32 mRebasedFlag-0x0000000000000004
> 00000000000000ea R_X86_64_PC32 mSmmRelocationOriginalAddress-0x0000000000000004
Therefore the patch does not regress
<https://bugzilla.tianocore.org/show_bug.cgi?id=849> ("Enable XCODE5 tool
chain for UefiCpuPkg with nasm source code").
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Like "gSmmCr4" in the previous patch, "gSmmCr0" is not only used for
machine code patching, but also as a means to communicate the initial CR0
value from SmmRelocateBases() to InitSmmS3ResumeState(). In other words,
the last four bytes of the "mov eax, Cr0Value" instruction's binary
representation are utilized as normal data too.
In order to get rid of the DB for "mov eax, Cr0Value", we have to split
both roles, patching and data flow. Introduce the "mSmmCr0" global (SMRAM)
variable for the data flow purpose. Rename the "gSmmCr0" variable to
"gPatchSmmCr0" so that its association with PatchInstructionX86() is clear
from the declaration, change its type to X86_ASSEMBLY_PATCH_LABEL, and
patch it with PatchInstructionX86(), to the value now contained in
"mSmmCr0".
This lets us remove the binary (DB) encoding of "mov eax, Cr0Value" in
"SmmInit.nasm".
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Unlike "gSmmCr3" in the previous patch, "gSmmCr4" is not only used for
machine code patching, but also as a means to communicate the initial CR4
value from SmmRelocateBases() to InitSmmS3ResumeState(). In other words,
the last four bytes of the "mov eax, Cr4Value" instruction's binary
representation are utilized as normal data too.
In order to get rid of the DB for "mov eax, Cr4Value", we have to split
both roles, patching and data flow. Introduce the "mSmmCr4" global (SMRAM)
variable for the data flow purpose. Rename the "gSmmCr4" variable to
"gPatchSmmCr4" so that its association with PatchInstructionX86() is clear
from the declaration, change its type to X86_ASSEMBLY_PATCH_LABEL, and
patch it with PatchInstructionX86(), to the value now contained in
"mSmmCr4".
This lets us remove the binary (DB) encoding of "mov eax, Cr4Value" in
"SmmInit.nasm".
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Rename the variable to "gPatchSmmCr3" so that its association with
PatchInstructionX86() is clear from the declaration, change its type to
X86_ASSEMBLY_PATCH_LABEL, and patch it with PatchInstructionX86(). This
lets us remove the binary (DB) encoding of some instructions in
"SmmInit.nasm".
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(This patch is the 64-bit variant of commit e75ee97224,
"UefiCpuPkg/PiSmmCpuDxeSmm: remove unneeded DBs from IA32 SmmStartup()",
2018-01-31.)
The SmmStartup() function executes in SMM, which is very similar to real
mode. Add "BITS 16" before it and "BITS 64" after it (just before the
@LongMode label).
Remove the manual 0x66 operand-size override prefixes, for selecting
32-bit operands -- the sizes of our operands trigger NASM to insert the
prefixes automatically in almost every spot. The one place where we have
to add it back manually is the LGDT instruction. In the LGDT instruction
we also replace the binary 0x2E prefix with the normal NASM syntax for CS
segment override.
The stores to the Control Registers were always 32-bit wide; the source
code only used RAX as source operand because it generated the expected
object code (with NASM compiling the source as if in BITS 64). With BITS
16 added, we can use the actual register width in the source operands
(EAX).
This patch causes NASM to generate byte-identical object code (determined
by disassembling both the pre-patch and post-patch versions, and comparing
the listings), except:
> @@ -231,7 +231,7 @@
> 000001D2 6689D3 mov ebx,edx
> 000001D5 66B800000000 mov eax,0x0
> 000001DB 0F22D8 mov cr3,eax
> -000001DE 662E670F0155F6 o32 lgdt [cs:ebp-0xa]
> +000001DE 2E66670F0155F6 o32 lgdt [cs:ebp-0xa]
> 000001E5 66B800000000 mov eax,0x0
> 000001EB 80CC02 or ah,0x2
> 000001EE 0F22E0 mov cr4,eax
The only difference is the prefix list order, it changes from:
- 0x66, 0x2E, 0x67
to
- 0x2E, 0x66, 0x67
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
"mXdSupported" is a global BOOLEAN variable, initialized to TRUE. The
CheckFeatureSupported() function is executed on all processors (not
concurrently though), called from SmmInitHandler(). If XD support is found
to be missing on any CPU, then "mXdSupported" is set to FALSE, and further
processors omit the check. Afterwards, "mXdSupported" is read by several
assembly and C code locations.
The tricky part is *where* "mXdSupported" is allocated (defined):
- Before commit 717fb60443 ("UefiCpuPkg/PiSmmCpuDxeSmm: Add paging
protection.", 2016-11-17), it used to be a normal global variable,
defined (allocated) in "SmmProfile.c".
- With said commit, we moved the definition (allocation) of "mXdSupported"
into "SmiEntry.nasm". The variable was defined over the last byte of a
"mov al, 1" instruction, so that setting it to FALSE in
CheckFeatureSupported() would patch the instruction to "mov al, 0". The
subsequent conditional jump would change behavior, plus all further read
references to "mXdSupported" (in C and assembly code) would read back
the source (imm8) operand of the patched MOV instruction as data.
This trick required that the MOV instruction be encoded with DB.
In order to get rid of the DB, we have to split both roles: we need a
label for the code patching, and "mXdSupported" has to be defined
(allocated) independently of the code patching. Of course, their values
must always remain in sync.
(1) Reinstate the "mXdSupported" definition and initialization in
"SmmProfile.c" from before commit 717fb60443. Change the assembly
language definition ("global") to a declaration ("extern").
(2) Define the "gPatchXdSupported" label (type X86_ASSEMBLY_PATCH_LABEL)
in "SmiEntry.nasm", and add the C-language declaration to
"SmmProfileInternal.h". Replace the DB with the MOV mnemonic (keeping
the imm8 source operand with value 1).
(3) In CheckFeatureSupported(), whenever "mXdSupported" is set to FALSE,
patch the assembly code in sync, with PatchInstructionX86().
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Rename the variable to "gPatchSmiCr3" so that its association with
PatchInstructionX86() is clear from the declaration, change its type to
X86_ASSEMBLY_PATCH_LABEL, and patch it with PatchInstructionX86(). This
lets us remove the binary (DB) encoding of some instructions in
"SmiEntry.nasm".
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Rename the variable to "gPatchSmiStack" so that its association with
PatchInstructionX86() is clear from the declaration. Also change its type
to X86_ASSEMBLY_PATCH_LABEL.
Unlike "gSmbase" in the previous patch, "gSmiStack"'s patched value is
also de-referenced by C code (in other words, it is read back after
patching): the InstallSmiHandler() function stores "CpuIndex" to the given
CPU's SMI stack through "gSmiStack". Introduce the local variable
"CpuSmiStack" in InstallSmiHandler() for calculating the stack location
separately, then use this variable for both patching into the assembly
code, and for storing "CpuIndex" through it.
It's assumed that "volatile" stood in the declaration of "gSmiStack"
because we used to read "gSmiStack" back for de-referencing; with that use
gone, we can remove "volatile" too. (Note that the *target* of the pointer
was never volatile-qualified.)
Finally, replace the binary (DB) encoding of "mov esp, imm32" in
"SmiEntry.nasm".
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Rename the variable to "gPatchSmbase" so that its association with
PatchInstructionX86() is clear from the declaration, change its type to
X86_ASSEMBLY_PATCH_LABEL, and patch it with PatchInstructionX86(). This
lets us remove the binary (DB) encoding of some instructions in
"SmiEntry.nasm".
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
"#endif" preprocessing directives near the top of "BaseLib.h" helpfully
repeat the preprocessing conditions from their matching "#if", "#ifdef",
and "#ifndef" directives. This practice has been less followed recently;
supplement the missing comments.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. Fix some "support" to "supported".
2. Fix some "set" to "clear" in ClearMemoryAttributes interface.
3. Remove redundant comments for GetMemoryAttributes interface.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
For gDS->SetMemorySpaceAttributes(), when user passes a combined
memory attribute including CPU arch attribute and other attributes,
like EFI_MEMORY_RUNTIME, ConverToCpuArchAttributes() will return
INVALID_CPU_ARCH_ATTRIBUTES and skip setting page/cache attribute for
the specified memory space.
We don't see any reason to forbid combining CPU arch attributes and
non-CPU-arch attributes when calling gDS->SetMemorySpaceAttributes(),
so we remove the check code in ConverToCpuArchAttributes(); the
remaining code is enough to grab the interested bits for
Cpu->SetMemoryAttributes().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Yi Li <phoenix.liyi@huawei.com>
Signed-off-by: Renhao Liang <liangrenhao@huawei.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Introduce TlsAuthConfigLib to read the list of trusted CA certificates
from fw_cfg and to store it to EFI_TLS_CA_CERTIFICATE_VARIABLE.
The fw_cfg file is formatted by the "p11-kit" and "update-ca-trust"
utilities on the host side, so that the host settings take effect in guest
HTTPS boot as well. QEMU forwards the file intact to the firmware. The
contents are sanity-checked by NetworkPkg/HttpDxe code that was added in
commit 0fd13678a6.
Link TlsAuthConfigLib via NULL resolution into TlsAuthConfigDxe. This sets
EFI_TLS_CA_CERTIFICATE_VARIABLE in time for both
NetworkPkg/TlsAuthConfigDxe (for possible HII interaction with the user)
and for NetworkPkg/HttpDxe (for the effective TLS configuration).
The file formatted by "p11-kit" can be large. On a RHEL-7 host, the the
Mozilla CA root certificate bundle -- installed with the "ca-certificates"
package -- is processed into a 182KB file. Thus, create
EFI_TLS_CA_CERTIFICATE_VARIABLE as a volatile & boot-time only variable.
Also, in TLS_ENABLE builds, set the cumulative limit for volatile
variables (PcdVariableStoreSize) to 512KB, and the individual limit for
the same (PcdMaxVolatileVariableSize) to 256KB.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In commit 62f43f7c19, we set PcdVariableStoreSize to the same value as
PcdFlashNvStorageVariableSize (which in turn comes from VARS_LIVE_SIZE in
"OvmfPkg.fdf.inc").
This equality between both PCDs is a false requirement from
EmuVariableFvbRuntimeDxe. FVB drivers should use
PcdFlashNvStorageVariableSize for supporting non-volatile variables (even
if they happen to be kept in RAM only), along the other PcdFlashNvStorage*
PCDs. Whereas PcdVariableStoreSize is for variables that are volatile at
the gRT->SetVariable() / gRT->GetVariable() API level.
(PlatformPei too bases the preallocation for EmuVariableFvbRuntimeDxe on
PcdFlashNvStorageFtwSpareSize.)
Replace PcdVariableStoreSize in EmuVariableFvbRuntimeDxe with the
same-value PcdFlashNvStorageVariableSize. This means no change in
behavior, and it allows us to increase PcdVariableStoreSize in a later
patch without disturbing EmuVariableFvbRuntimeDxe (or PlatformPei).
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The variable driver doesn't distinguish "non-volatile non-authenticated"
variables from "volatile non-authenticated" variables, when checking
individual variable sizes against the permitted maximum.
PcdMaxVariableSize covers both kinds.
This prevents volatile non-authenticated variables from carrying large
data between UEFI drivers, despite having no flash impact. One example is
EFI_TLS_CA_CERTIFICATE_VARIABLE, which platforms might want to create as
volatile on every boot: the certificate list can be several hundred KB in
size.
Introduce PcdMaxVolatileVariableSize to represent the limit on individual
volatile non-authenticated variables. The default value is zero, which
makes Variable/RuntimeDxe fall back to PcdMaxVariableSize (i.e. the
current behavior). This is similar to the PcdMaxAuthVariableSize fallback.
Whenever the size limit is enforced, consult MaxVolatileVariableSize as
the last option, after checking
- MaxAuthVariableSize for VARIABLE_ATTRIBUTE_AT_AW,
- and MaxVariableSize for EFI_VARIABLE_NON_VOLATILE.
EFI_VARIABLE_HARDWARE_ERROR_RECORD is always handled separately; it always
takes priority over the three cases listed above.
Introduce the GetMaxVariableSize() helper to consider
PcdMaxVolatileVariableSize, in addition to
GetNonVolatileMaxVariableSize(). GetNonVolatileMaxVariableSize() is
currently called at three sites, and two of those need to start using
GetMaxVariableSize() instead:
- VariableServiceInitialize() [VariableSmm.c]: the SMM comms buffer must
accommodate all kinds of variables,
- VariableCommonInitialize() [Variable.c]: the preallocated scratch space
must also accommodate all kinds of variables,
- InitNonVolatileVariableStore() [Variable.c] can continue using
GetNonVolatileMaxVariableSize().
Don't modify the ReclaimForOS() function as it is specific to non-volatile
variables and should ignore PcdMaxVolatileVariableSize.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
Tested-by: Gary Lin <glin@suse.com>
[lersek@redhat.com: set MaxVolatileVariableSize where Star suggested]
Reviewed-by: Star Zeng <star.zeng@intel.com>
VariableRuntimeDxe will have OnEndOfDxe() callback function at
TPL_NOTIFY level on EndOfDxe event when DXE variable solution is
used.
Status = gBS->CreateEventEx (
EVT_NOTIFY_SIGNAL,
TPL_NOTIFY,
OnEndOfDxe,
NULL,
&gEfiEndOfDxeEventGroupGuid,
&EndOfDxeEvent
);
VariableSmm will have SmmEndOfDxeCallback() callback function at
TPL_CALLBACK level on SmmEndOfDxe event when SMM variable solution
is used.
SmmIplGuidedEventNotify() - PiSmmIpl.c TPL_CALLBACK on EndOfDxe
->
SmmEndOfDxeHandler() - PiSmmCore.c install SmmEndOfDxe protocol
->
SmmEndOfDxeCallback() - VariableSmm.c
The TPL level for (Smm)EndOfDxe callback between VariableRuntimeDxe
and VariableSmm is inconsistent, it will make the unified platform
code could not make sure its TPL_NOTIFY EndOfDxe callback function
(to use variable lock/check) executed before (Smm)EndOfDxe callback
function in variable driver. The variable lock/check will start to
protect after (Smm)EndOfDxe callback function in variable driver is
executed.
This patch is to algin the TPL level to TPL_CALLBACK for (Smm)EndOfDxe
callback between VariableRuntimeDxe and VariableSmm.
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
build report error when the same Guid value in FDF file use lowercase,
in tools_def.txt file use uppercase.
The guid value's compare should not case-sensitive.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bin Wang <binx.a.wang@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Add the partition type GUID for every partition to the installed handle,
this is required per the UEFI specification.
"The firmware must add the PartitionTypeGuid to the handle of every
active GPT partition using EFI_BOOT_SERVICES.InstallProtocolInterface()."
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen.qdt@qualcommdatacenter.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
move hex character info from GUID expressions into seperate variable to
facilitate reuse.
I had a type with insufficient {} in the first version.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=890
There are use cases where a VOID * PCD needs to be generated from multiple
binary input files. This can be in the form of an array of fixed size
elements or a set of variable sized elements.
Update BinToPcd to support multiple one or more -i INPUTFILE arguments.
By default, the contents of each binary input file are concatenated in
the order provided. This supports generating a PCD that is an array of
fixed size elements
Add -x, --xdr flags to BinToPcd to encodes the PCD using the
Variable-Length Opaque Data of RFC 4506 External Data Representation
Standard (XDR).
https://tools.ietf.org/html/rfc4506https://tools.ietf.org/html/rfc4506#section-4.10
The data format from RFC 4506 meets the requirements for a PCD that is a
set of variable sized elements in the Variable-Length Opaque Data format.
The overhead of this format is a 32-bit length and 0 to 3 bytes of padding
to align the next element at a 32-bit boundary.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
If the platform creates the "TlsCaCertificate" variable as volatile, then
EnrollX509toVariable() shouldn't fail to extend it just because
TLS_AUTH_CONFIG_VAR_BASE_ATTR contains the EFI_VARIABLE_NON_VOLATILE
attribute.
Thus, if the variable exists, add the EFI_VARIABLE_APPEND_WRITE attribute
to the variable's current attributes. This is what DeleteCert() does
already.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
In TlsConfigCertificate(), make sure that the set of EFI_SIGNATURE_LIST
objects that the platform stored to "TlsCaCertificate" is well-formed.
In addition, because HttpInstance->TlsConfiguration->SetData() expects
X509 certificates only, ensure that the EFI_SIGNATURE_LIST objects only
report X509 certificates, as described under EFI_CERT_X509_GUID in the
UEFI-2.7 spec.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=909
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
For TlsConfigureSession(), it makes sense to exempt EFI_NOT_FOUND from
TlsConfigCipherList() / gRT->GetVariable(), because there is a default
cipher list (SSL_DEFAULT_CIPHER_LIST) we can fall back to.
The same is not true of TlsConfigCertificate(), because there is no
default CA cert list. The platform (or the user of the Setup utility) is
required to configure a CA cert list first.
Remove the misleading comment and status code mapping in
TlsConfigCertificate().
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Introduce a FreeCACert label near the end of the function, so that we can
keep the FreePool(CACert) statement centralized for error and success
exits.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
The string "HTTPClient" has 10 non-NUL characters; the value 9 is a
copy-paste leftover from "PXEClient". Check for all 10 characters in the
vendor-class-identifier option when determining whether the DHCP offer is
an HTTP offer.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Initialize local variable to suppress warning C4701/C4703:
potentially uninitialized local variable/pointer variable.
1.In VirtualMemory.c:
Read of "PageMapLevel4Entry" in SetMemoryEncDe() is only
reached when "PageMapLevel4Entry" is got correctly.
2.In VirtioBlk.c:
Reads (dereferences) of "BufferMapping" and "BufferDeviceAddress"
in SynchronousRequest() are only reached if "BufferSize > 0" *and*
we map the data buffer successfully.
3.In VirtioScsi.c:
Reads (dereferences) of "InDataMapping" and "InDataDeviceAddress",
in VirtioScsiPassThru() are only reached if
"Packet->InTransferLength > 0" on input, *and* we map the
input buffer successfully. The similar reason for "OutDataMapping"
and "OutDataDeviceAddress".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
sha256 is not the standard option. It should be replaced by sha -sha256.
Otherwise, it doesn't work in MAC OS.
In V2, update the option to sha1 -sha256.
In late openssl version >= 1.1, there is no sha option, but has sha1,sha256.
In previous openssl version < 1.1, there is no sha256, but has sha,sha1.
To work with all openssl version, use sha1 -sha256 for it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liao Jui-peng <jui-pengx.liao@intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Add a new exception support for the checkPoint of no use C type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Booting from USB may fail while the macro USB_BOOT_IO_BLOCKS
set to 128 because the block size of some USB devices are exceeded
512, like some virtual CD-ROM from BMC, the block size is 2048.
So,the count blocks to transfer should be calculated by block
size of the USB devices.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <ming.huang@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Commit 5563281fa2
* ShellPkg/[hex]edit: use SimpleTextInEx to read console
changes shell edit and hexedit to read input through SimpleTextInEx.
It exposes a issue in UsbKeyboard driver:
Per UEFI Spec,
When interpreting the data from this function (ReadKeyStrokeEx), it
should be noted that if a class of printable characters that are
normally adjusted by shift modifiers (e.g. Shift Key + "f" key) would
be presented solely as a KeyData.Key.UnicodeChar without the
associated shift state. So in the previous example of a Shift Key +
"f" key being pressed, the only pertinent data returned would be
KeyData.Key.UnicodeChar with the value of "F".
UsbKeyboard driver does convert Shift Key + "f" to "F" without the
shift state. But it doesn't do the conversion for all printable
characters, e.g.: Shift Key + "1" --> "!".
The root cause is today's logic to check whether a character is
printable or not is as below:
if ((KeyDescriptor->AffectedAttribute & EFI_AFFECTED_BY_CAPS_LOCK)
!= 0) {
So it only converts Shift + "a"-"z", but doesn't for Shift + "0"-"9",
and Shift + "["...
The patch updates the check logic as below to fix the issue:
if ((KeyDescriptor->Unicode != CHAR_NULL) &&
(KeyDescriptor->ShiftedUnicode != CHAR_NULL) &&
(KeyDescriptor->Unicode != KeyDescriptor->ShiftedUnicode)) {
The above check is TRUE when the character is printable and
it's *really* affected by Shift key.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
If there is no dynamic pcds, there should be DB header
in the Pcd DataBase.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
After completed a DHCP D.O.R.A process and got the new address, the ARP Instance
and RouteTable should be configured so as to avoid the later Pxe.Arp failure.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Utilities written in Python may depend on external (preinstalled) Python
packages; for example, Ecc depends on "antlr_python_runtime-3.0.1". Such
packages need not be installed system-wide, as long as they are reachable
through PYTHONPATH. Therefore we shouldn't overwrite the user's PYTHONPATH
with "BaseTools/Source/Python"; instead, we should prepend the latter to
the former.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=896
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
TPM2.0 command lib always assumes TPM device and transmission channel can
respond correctly. But it is not true when communication channel is exploited
and wrong data is spoofed. Add more logic to prohibit memory overflow attack.
Cc: Long Qin <qin.long@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
use ''.format instead of eval() and use some list comprehension for making list
delete some unused variables
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
remove COMPATIBLE_STRING_TOKEN as it is the same as STRING_TOKEN
remove if statement that used one or the other (identical) re
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Current code will generate maxsize for HII type PCD when parser DSC
file, while this HII type PCD value maybe override in build command
per --pcd option, so the max size need re-calculate.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch adds maintainers, reviewer and directory for the
StandaloneMmPkg. This package will host an implementation of Standalone
Management Mode as specified in the Platform Initialization (PI)
Specification, Volume 4: Management Mode Core Interface.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Reviewed-by: Jiewen.yao@intel.com
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
When source level debug is enabled, but debug cable is not connected,
XhcResetHC() in XhciReg.c will reset the host controller, the debug
capability registers will be also reset. After the code in
InitializeUsbDebugHardware() sets DCE bit and LSE bit to "1" in DCCTRL,
there will be DMA on 0 (the value of some debug capability registers
for data transfer is 0) address buffer, fault info like below will
appear when IOMMU based on VTd is enabled.
VER_REG - 0x00000010
CAP_REG - 0x00D2008C40660462
ECAP_REG - 0x0000000000F050DA
GSTS_REG - 0xC0000000
RTADDR_REG - 0x0000000086512000
CCMD_REG - 0x2800000000000000
FSTS_REG - 0x00000002
FECTL_REG - 0xC0000000
FEDATA_REG - 0x00000000
FEADDR_REG - 0x00000000
FEUADDR_REG - 0x00000000
FRCD_REG[0] - 0xC0000006000000A0 0000000000000000
Fault Info - 0x0000000000000000
Source - B00 D14 F00
Type - 1 (read)
Reason - 6
IVA_REG - 0x0000000000000000
IOTLB_REG - 0x1200000000000000
This patch is to return error for the case.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
when VOID* type non-structure pcd used in --pcd, and its max size is not
specified in DSC or its value is hex value, build break due to the code
int(Pcd.MaxDatumSize,10).
Now this patch remove this code, because tool will calculate the size
info in later phase.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
when only define the PCD in the DEC file, and use --pcd feature,
we also need cover this case for Feature Flag Type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Within function CoreExitBootServices(), this commit will move the call
of:
MemoryProtectionExitBootServicesCallback();
before:
SaveAndSetDebugTimerInterrupt (FALSE);
and
gCpu->DisableInterrupt (gCpu);
The reason is that, within MemoryProtectionExitBootServicesCallback(),
APIs like RaiseTpl and RestoreTpl maybe called. An example will be:
DebugLib (using PeiDxeDebugLibReportStatusCode instance)
|
v
ReportStatusCodeLib (using DxeReportStatusCodeLib instance)
|
v
Raise/RestoreTpl
The call of Raise/RestoreTpl APIs will re-enable BSP interrupts. Hence,
this commit refine the calling sequence to ensure BSP interrupts before
leaving CoreExitBootServices().
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Within function ApWakeupFunction():
When source level debugger is enabled, AP interrupts will be enabled by
EnableDebugAgent(). Then the AP function will be executed by:
Procedure (Parameter);
After the AP function returns, AP interrupts will be disabled when the
APs are placed in loop mode (both HltLoop and MwaiLoop).
However, at ExitBootServices, ApWakeupFunction() is called with
'Procedure' equals to RelocateApLoop().
(ExitBootServices callback registered within InitMpGlobalData())
RelocateApLoop() never returns, so it has to disable the AP interrupts by
itself. However, we find that interrupts are only disabled for the
HltLoop case, but not for the MwaitLoop case (within file MpFuncs.nasm).
This commit adds the missing disabling of AP interrupts for MwaitLoop.
Also, for X64, this commit will disable the interrupts before switching to
32-bit mode.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Build options for ARM64 are the same as for ARM, except for /BASE:0
which is removed from DLINK flags to avoid LNK1355 error:
invalid base address 0x0; ARM64 image cannot have base address below 4GB
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Liming Gao <liming.gao@intel.com>
We need to explicitly call the built-in __va_start() for ARM64, otherwise
the variable parameters are not properly enqueued for the next function
calls.
Also do the same for ARM, as as it doesn't harm us.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Liming Gao <liming.gao@intel.com>
We disable the exact same warnings as IA32 and X64.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Liming Gao <liming.gao@intel.com>
since the first character of the string cannot be found by multiple if
statements, use elif to optomize the behavior.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Option --hash --binary-destination generate Binaries section in
the inf file, but the path of ASL file is begin with
Output directory, so need replace Output directory with '',
will get the file name RamDisk.aml
Incorrect AML file path in inf file on linux:
[Binaries.X64]
PE32|RamDiskDxe.efi
ASL|home/tiano/Desktop/hash/edk2/Build/OvmfX64/RELEASE_GCC5/X64
/MdeModulePkg/Universal/Disk/RamDiskDxe/RamDiskDxe/OUTPUT/RamDisk.aml
DXE_DEPEX|RamDiskDxe.depex
BIN|RamDiskDxeOffset.bin
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Current code uses string length as BufferSize input to UnicodeSPrint,
it is wrong and makes the pop up string trimmed. The BufferSize input
to UnicodeSPrint should be the size, in bytes, of the output buffer.
This is to use sizeof (mPopUpString) as the BufferSize input to
UnicodeSPrint, it also updates array size of mPopUpString from 256 to
100 that is enough, otherwise the pop up string may be too long.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This improves the UEFI boot time for VMs that have "-kernel", many disks
or NICs, and no "bootindex" properties.
(Unlike in ArmVirt commit 23d04b58e2, in OvmfPkg commit 52fba28994 we
introduced TryRunningQemuKernel() right from the start *after*
BdsLibConnectAll(). Therefore, unlike in patch
'ArmVirtPkg/PlatformBootManagerLib: return to "-kernel before boot
devices"', we adopt the logic as new in this patch.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Gabriel Somlo <gsomlo@gmail.com>
PlatformBootManagerAfterConsole()
<--------------------------------+
PlatformBdsConnectSequence() |
ConnectDevicesFromQemu() / EfiBootManagerConnectAll() |
PciAcpiInitialization() ---------------------------------+
TryRunningQemuKernel()
Functionally this is a no-op:
- PciAcpiInitialization() iterates over PciIo protocol instances, which
are available just the same at the new call site.
- The PCI interrupt line register exists only to inform system software
(it doesn't affect hardware) and UEFI drivers don't use PCI interrupts
anyway.
(More background in commits 2e70cf8ade and 5218c27950c4.)
This change will let us move TryRunningQemuKernel() between
PciAcpiInitialization() and PlatformBdsConnectSequence() in the next
patch.
Cc: "Gabriel L. Somlo" <gsomlo@gmail.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gabriel Somlo <gsomlo@gmail.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Gabriel Somlo <gsomlo@gmail.com>
The old-style "Routine Description: ..." comments use the leftmost column
and are placed between the parameter list and the function body. Therefore
they cause git-diff to produce bogus hunk headers that fail to name the
function being patched.
Convert these comment blocks to the current edk2 style. While at it, clean
them up too.
For PlatformBootManagerBeforeConsole() and
PlatformBootManagerAfterConsole(), copy the descriptions from the call
sites in "MdeModulePkg/Universal/BdsDxe/BdsEntry.c". They are more
detailed than the comments in the lib class header
"MdeModulePkg/Include/Library/PlatformBootManagerLib.h"; ArmVirtPkg
already uses these comments.
No functional changes.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Gabriel Somlo <gsomlo@gmail.com>
Move the TryRunningQemuKernel() call back to its original place. This
improves the UEFI boot time for VMs that have "-kernel", many disks or
NICs, and no "bootindex" properties. A well-known example is
guestfish/libguestfs.
For more info on the TryRunningQemuKernel() location, see the following
commits: 23d04b58e2, a78c4836ea, 158990b941.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Xiang Zheng <xiang.zheng@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
SMM core will add a HEADER before each allocated pool memory and clean
up this header once it's freed. If a block of allocated pool is marked
as read-only after allocation (EfiRuntimeServicesCode type of pool in
SMM will always be marked as read-only), #PF exception will be triggered
during memory pool freeing.
Normally EfiRuntimeServicesCode type of pool should not be freed in the
real world. But some test suites will actually do memory free for all
types of memory for the purpose of functionality and conformance test.
So this issue should be fixed anyway.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
If given address is on 64K boundary and the requested bit number is 64,
all SetBits(), ClearBits() and GetBits() will encounter ASSERT problem
in trying to do a 64 bits of shift, which is not allowed by LShift() and
RShift(). This patch tries to fix this issue by turning bits operation
into whole integer operation in such situation.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
If given address is on 64K boundary and the requested bit number is 64,
all SetBits(), ClearBits() and GetBits() will encounter ASSERT problem
in trying to do a 64 bits of shift, which is not allowed by LShift() and
RShift(). This patch tries to fix this issue by turning bits operation
into whole integer operation in such situation.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Due to the fact that HeapGuard needs CpuArchProtocol to update page
attributes, the feature is normally enabled after CpuArchProtocol is
installed. Since there're some drivers are loaded before CpuArchProtocl,
they cannot make use HeapGuard feature to detect potential issues.
This patch fixes above situation by updating the DXE core to skip the
NULL check against global gCpu in the IsMemoryTypeToGuard(), and adding
NULL check against gCpu in SetGuardPage() and UnsetGuardPage() to make
sure that they can be called but do nothing. This will allow HeapGuard to
record all guarded memory without setting the related Guard pages to not-
present.
Once the CpuArchProtocol is installed, a protocol notify will be called
to complete the work of setting Guard pages to not-present.
Please note that above changes will cause a #PF in GCD code during cleanup
of map entries, which is initiated by CpuDxe driver to update real mtrr
and paging attributes back to GCD. During that time, CpuDxe doesn't allow
GCD to update memory attributes and then any Guard page cannot be unset.
As a result, this will prevent Guarded memory from freeing during memory
map cleanup.
The solution is to avoid allocating guarded memory as memory map entries
in GCD code. It's done by setting global mOnGuarding to TRUE before memory
allocation and setting it back to FALSE afterwards in GCD function
CoreAllocateGcdMapEntry().
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This change is to avoid the function conflict.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
According to UEFI spec 2.7, PciIo->GetBarAttributes should return host
address (CPU view ddress) rather than device address (PCI view
address), and
device address = host address + address translation offset,
so we subtract translation from device address before returning.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Yi Li <phoenix.liyi@huawei.com>
Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to UEFI spec 2.7, PciRootBridgeIo->Configuration() should
return host address (CPU view ddress) rather than device address
(PCI view address), so in function GetMmioAddressTranslationOffset we
need to convert the range to device address before comparing.
And device address = host address + translation offset.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Yi Li <phoenix.liyi@huawei.com>
Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
PCI address translation is necessary for some non-x86 platforms. On
such platforms, address value (denoted as "device address" or "address
in PCI view") set to PCI BAR registers in configuration space might be
different from the address which is used by CPU to access the
registers in memory BAR or IO BAR spaces (denoted as "host address" or
"address in CPU view"). The difference between the two addresses is
called "Address Translation Offset" or simply "translation", and can
be represented by "Address Translation Offset" in ACPI QWORD Address
Space Descriptor (Offset 0x1E). However UEFI and ACPI differs on the
definitions of QWORD Address Space Descriptor, and we will follow UEFI
definition on UEFI protocols, such as PCI root bridge IO protocol and
PCI IO protocol. In UEFI 2.7, "Address Translation Offset" is "Offset
to apply to the Starting address to convert it to a PCI address". This
means:
1. Translation = device address - host address.
2. PciRootBridgeIo->Configuration should return CPU view address, as
well as PciIo->GetBarAttributes.
Summary of addresses used in protocol interfaces and internal
implementations:
1. *Only* the following protocol interfaces assume Address is Device
Address:
(1). PciHostBridgeResourceAllocation.GetProposedResources()
Otherwise PCI bus driver cannot set correct address into PCI
BARs.
(2). PciRootBridgeIo.Mem.Read() and PciRootBridgeIo.Mem.Write()
(3). PciRootBridgeIo.CopyMem()
UEFI and PI spec have clear statements for all other protocol
interfaces about the address type.
2. Library interfaces and internal implementation:
(1). Base and Limit in PCI_ROOT_BRIDGE_APERTURE are device address.
It is easy to check whether the address is below 4G or above 4G.
(2). Addresses in PCI_ROOT_BRIDGE_INSTANCE.ResAllocNode are host
address, for they are allocated from GCD.
(3). Address passed to PciHostBridgeResourceConflict is host address,
for it comes from PCI_ROOT_BRIDGE_INSTANCE.ResAllocNode.
RESTRICTION: to simplify the situation, we require the alignment of
Translation must be larger than any BAR alignment in the same root
bridge, so that resource allocation alignment can be applied to both
device address and host address.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Yi Li <phoenix.liyi@huawei.com>
Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add Translation field to PCI_ROOT_BRIDGE_APERTURE. Translation is used
to represent the difference between device address and host address,
if they are not the same on some platforms.
In UEFI 2.7, "Address Translation Offset" is "Offset to apply to the
Starting address to convert it to a PCI address". This means:
Translation = device address - host address
So we also use the above calculation for this Translation field to
keep consistent.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Yi Li <phoenix.liyi@huawei.com>
Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Use ZeroMem() to initialize (or re-initialize) all fields in temporary
PCI_ROOT_BRIDGE_APERTURE variables to zero. This is not mandatory but
is helpful for future extension: when we add new fields to
PCI_ROOT_BRIDGE_APERTURE and the default value of these fields can
safely be zero, this code will not suffer from an additional
change.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Yi Li <phoenix.liyi@huawei.com>
Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Use ZeroMem() to initialize (or re-initialize) all fields in temporary
PCI_ROOT_BRIDGE_APERTURE variables to zero. This is not mandatory but
helpful for future extension: when we add new fields to
PCI_ROOT_BRIDGE_APERTURE and the default value of these fields can
safely be zero, this code will not suffer from an additional change.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Yi Li <phoenix.liyi@huawei.com>
Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
If timer interrupt is level sensitive, reloading timer compare
register has a side effect of clearing GIC pending status, so a "ISB"
is needed to make sure this instruction is executed before enabling
CPU IRQ, or else we may get spurious timer interrupts.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
de8373fa07 could not handle two cases.
1. For the case that the USB3 debug port instance and DMA buffers are
from PEI HOB with IOMMU enabled, it was to reallocate the DMA buffers
by AllocateAddress with the memory type accessible by SMM environment.
But reallocating the DMA buffers by AllocateAddress may fail.
2. At S3 resume, after the code is transferred to PiSmmCpuDxeSmm from
S3Resume2Pei, HOB is still needed to be used for DMA operation, but
PiSmmCpuDxeSmm has no way to get the HOB at S3 resume.
The patch is to re-support IOMMU.
For PEI, allocate granted DMA buffer from IOMMU PPI, register IOMMU PPI
notification to reinitialize hardware with granted DMA buffer if IOMMU
PPI is not present yet.
For DXE, map DMA buffer by PciIo in PciIo notification for early DXE,
and register DxeSmmReadyToLock notification to reinitialize hardware
with granted DXE DMA buffer accessible by SMM environment for late DXE.
DebugAgentLib has been managing the instance as Handle in
HOB/SystemTable. The Handle(instance) from DebugAgentLib can be used
directly in DebugCommunicationLibUsb3. Then DebugCommunicationLibUsb3
could get consistent Handle(instance) from DebugAgentLib.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Fix GCC build failures below.
variable 'EvtTrb' set but not used [-Werror=unused-but-set-variable]
variable 'Index' set but not used [-Werror=unused-but-set-variable]
The build failure could only be caught with -D SOURCE_DEBUG_USE_USB3
build flag.
ad6040ec9b needs to be also reverted
when reverting IOMMU support patches, otherwise there will be conflict.
This patch is to re-do ad6040ec9b.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
QemuBootOrderLib expects PlatformBootManagerLib to call the following
triplet:
(1) EfiBootManagerConnectAll(),
(2) EfiBootManagerRefreshAllBootOption(),
(3) SetBootOrderFromQemu().
This leads to bad performance, when many devices exist such that the
firmware can drive them, but they aren't marked for booting in the
"bootorder" fw_cfg file. Namely,
(1) EfiBootManagerConnectAll() talks to all hardware, which takes long.
Plus some DriverBindingStart() functions write NV variables, which is
also slow. (For example, the IP config policy for each NIC is stored
in an NV var that is named after the MAC).
(2) EfiBootManagerRefreshAllBootOption() generates boot options from the
protocol instances produced by (1). Writing boot options is slow.
(3) Under the above circumstances, SetBootOrderFromQemu() removes most of
the boot options produced by (2). Erasing boot options is slow.
Introduce ConnectDevicesFromQemu() as a replacement for (1): only connect
devices that the QEMU user actually wants to boot off of.
(There's a slight loss of compatibility when a platform switches from
EfiBootManagerConnectAll() to ConnectDevicesFromQemu().
EfiBootManagerConnectAll() may produce UEFI device paths that are unknown
to QemuBootOrderLib (that is, for neither PCI- nor virtio-mmio-based
devices). The BootOrderComplete() function lets such unmatched boot
options survive at the end of the boot order. With
ConnectDevicesFromQemu(), these options will not be auto-generated in the
first place. They may still be produced by other means.
SetBootOrderFromQemu() is not modified in any way; reordering+filtering
boot options remains a separate task.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: Xiang Zheng <xiang.zheng@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # ArmVirtQemu
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Xiang Zheng <xiang.zheng@linaro.org>
The "/MAC(" suffix of the translated UEFI devpath prefix is unnecessary
for matching, because the virtio-mmio base address in VenHwString is
unique anyway. Furthermore, the partial string "MAC(" cannot be processed
by ConvertTextToDevicePath(), which will become relevant later in this
series. Remove "/MAC(".
While at it, remove a bogus comment on PCI.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: Xiang Zheng <xiang.zheng@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # ArmVirtQemu
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Xiang Zheng <xiang.zheng@linaro.org>
There're two ASSERT issues which will be triggered by boot loader of
Windows 10.
The first is caused by allocating memory in heap guard during another
memory allocation, which is not allowed in DXE core. Avoiding reentry
of memory allocation has been considered in heap guard feature. But
there's a hole in the code of function FindGuardedMemoryMap(). The fix
is adding AllocMapUnit parameter in the condition of while(), which
will prevent memory allocation from happenning during Guard page
check operation.
The second is caused by the core trying to allocate page 0 with Guard
page, which will cause the start address rolling back to the end of
supported system address. According to the requirement of heap guard,
the fix is just simply skipping the free memory at page 0 and let
the core continue searching free memory after it.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In edit or hexedit, the mouse cursor doesn't move when moving
the mouse.
The root cause is 5563281fa2
* ShellPkg/[hex]edit: use SimpleTextInEx to read console
wrongly uses WaitForEvent() to listen keyboard input.
It blocks the code execution when there is no keyboard input.
While the same function also polls the mouse move status,
the mouse movement cannot be reflected to the screen when
there is no keyboard input.
The patch fixes the issue by use CheckEvent() instead of
WaitForEvent().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Today's implementation forgot to clear the screen to black in
SetMode(). It causes SCT SetMode() test fails.
The patch adds the clear screen operation in SetMode() to fix
the SCT failure.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Among other things, the header file declares the AllocateAcpiNvsPool()
function. This function is called from the "LockBoxLib.c" source file (in
the implementation of the SaveLockBox() library API), which is built into
both library instances. AllocateAcpiNvsPool() is implemented separately
per library instance, in "LockBoxBase.c" and "LockBoxDxe.c", respectively.
(In the LockBoxBaseLib instance, the AllocateAcpiNvsPool() function is
never expected to be called -- the public SaveLockBox() API should never
be called before the DXE phase --, we just have to provide a stub for
linking purposes.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
We added initial support for QEMU's ACPI linker/loader in commit
a618eaa1f4 ("OvmfPkg: AcpiPlatformDxe: don't rely on unstable QEMU
interface", 2014-06-19). This commit defined the command structures in the
new file "QemuLoader.h", and #included the header in the preexistent
"Qemu.c" file, where the initial command script processing loop was being
implemented.
In commit 14b0faadfc ("OvmfPkg/AcpiPlatformDxe: Split QEMU fw-cfg into a
new file", 2015-02-02), we extracted the -- by then, more advanced --
linker/loader script processing from "Qemu.c" to "QemuFwCfgAcpi.c".
"Qemu.c" was going to need "QemuLoader.h" no longer, but we forgot to make
the #include directive unique to the new "QemuFwCfgAcpi.c" file. Do it
now.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Phil Dennis-Jordan <phil@philjordan.eu>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The ISCSI connection will fail for the first time if the target info is
retrieved from DHCP and expressed as URI format. The issue is caused by
the missing DNS protocol dependency check during the driver support
function.
This patch is to fix the above issue.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The incorrect return status was caused by the commit of 39b0867d, which
was to resolve the token status error that does not compliance with spec
definition, but it results the protocol status not compliance with spec
definition.
This patch is to resolve above issue.
Cc: Wang Fan <fan.wang@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wang, Fan <fan.wang@intel.com>
PcdDb optimization has handled PCD DB for each SKU, not for single PCD.
So, this PCD attribute is not used any more.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
It is regression bug that missing the Pcd DatumType info from DEC file
for --pcd .
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
TcgPei doesn't actually use the PEI-phase read-only variable service, so
drop that from the Depex.
This patch was inspired by commit ab9e11da66 ("SecurityPkg/Tcg2Pei: drop
PeiReadOnlyVariable from Depex", 2018-03-09).
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Suggested-by: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
- the @file comment block should match between INF and main C file
- rewrap / refill columns to 79 characters
- insert space before opening paren
- prefix and suffix //-style comment block with empty // lines
- fix indentation of arguments in multi-line function call
- general tab spacing (indent step) is 2 in edk2, unlike QEMU's 4
No functional changes.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Commit:24e4ad7 (OvmfPkg: Add AmdSevDxe driver) added a driver which runs
early in DXE phase and clears the C-bit from NonExistent entry -- which
is later split and accommodate the flash MMIO. When SMM is enabled, we
build two sets of page tables; first page table is used when executing
code in non SMM mode (SMM-less-pgtable) and second page table is used
when we are executing code in SMM mode (SMM-pgtable).
During boot time, AmdSevDxe driver clears the C-bit from the
SMM-less-pgtable. But when SMM is enabled, Qemu Flash services are used
from SMM mode.
In this patch we explicitly clear the C-bit from Qemu flash MMIO range
before we probe the flash. When OVMF is built with SMM_REQUIRE then
call to initialize the flash services happen after the SMM-pgtable is
created and processor has served the first SMI. At this time we will
have access to the SMM-pgtable.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: trivial coding style improvements]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The library registers a security management handler, to measure images
that are not measure in PEI phase. For example with the qemu PXE rom:
Loading driver at 0x0003E6C2000 EntryPoint=0x0003E6C9076 8086100e.efi
And the following binary_bios_measurements log entry seems to be
added:
PCR: 2 type: EV_EFI_BOOT_SERVICES_DRIVER size: 0x4e digest: 70a22475e9f18806d2ed9193b48d80d26779d9a4
The following order of operations ensures that 3rd party UEFI modules,
such as PCI option ROMs and other modules possibly loaded from outside
of firmware volumes, are measured into the TPM:
(1) Tcg2Dxe is included in DXEFV, therefore it produces the TCG2
protocol sometime in the DXE phase (assuming a TPM2 chip is present,
reported via PcdTpmInstanceGuid).
(2) The DXE core finds that no more drivers are left to dispatch from
DXEFV, and we enter the BDS phase.
(3) OVMF's PlatformBootManagerLib connects all PCI root bridges
non-recursively, producing PciIo instances and discovering PCI
oproms.
(4) The dispatching of images that don't originate from FVs is deferred
at this point, by
"MdeModulePkg/Universal/SecurityStubDxe/Defer3rdPartyImageLoad.c".
(5) OVMF's PlatformBootManagerLib signals EndOfDxe.
(6) OVMF's PlatformBootManagerLib calls
EfiBootManagerDispatchDeferredImages() -- the images deferred in
step (4) are now dispatched.
(7) Image dispatch invokes the Security / Security2 Arch protocols
(produced by SecurityStubDxe). In this patch, we hook
DxeTpm2MeasureBootLib into SecurityStubDxe, therefore image dispatch
will try to locate the TCG2 protocol, and measure the image into the
TPM2 chip with the protocol. Because of step (1), the TCG2 protocol
will always be found and used (assuming a TPM2 chip is present).
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This module measures and log the boot environment. It also produces
the Tcg2 protocol, which allows for example to read the log from OS.
The linux kernel doesn't yet read the EFI_TCG2_EVENT_LOG_FORMAT_TCG_2,
which is required for crypto-agile log. In fact, only upcoming 4.16
adds support EFI_TCG2_EVENT_LOG_FORMAT_TCG_1_2:
[ 0.000000] efi: EFI v2.70 by EDK II
[ 0.000000] efi: SMBIOS=0x3fa1f000 ACPI=0x3fbb6000 ACPI 2.0=0x3fbb6014 MEMATTR=0x3e7d4318 TPMEventLog=0x3db21018
$ python chipsec_util.py tpm parse_log binary_bios_measurements
[CHIPSEC] Version 1.3.5.dev2
[CHIPSEC] API mode: using OS native API (not using CHIPSEC kernel module)
[CHIPSEC] Executing command 'tpm' with args ['parse_log', '/tmp/binary_bios_measurements']
PCR: 0 type: EV_S_CRTM_VERSION size: 0x2 digest: 1489f923c4dca729178b3e3233458550d8dddf29
+ version:
PCR: 0 type: EV_EFI_PLATFORM_FIRMWARE_BLOB size: 0x10 digest: fd39ced7c0d2a61f6830c78c7625f94826b05bcc
+ base: 0x820000 length: 0xe0000
PCR: 0 type: EV_EFI_PLATFORM_FIRMWARE_BLOB size: 0x10 digest: 39ebc6783b72bc1e73c7d5bcfeb5f54a3f105d4c
+ base: 0x900000 length: 0xa00000
PCR: 7 type: EV_EFI_VARIABLE_DRIVER_CONFIG size: 0x35 digest: 57cd4dc19442475aa82743484f3b1caa88e142b8
PCR: 7 type: EV_EFI_VARIABLE_DRIVER_CONFIG size: 0x24 digest: 9b1387306ebb7ff8e795e7be77563666bbf4516e
PCR: 7 type: EV_EFI_VARIABLE_DRIVER_CONFIG size: 0x26 digest: 9afa86c507419b8570c62167cb9486d9fc809758
PCR: 7 type: EV_EFI_VARIABLE_DRIVER_CONFIG size: 0x24 digest: 5bf8faa078d40ffbd03317c93398b01229a0e1e0
PCR: 7 type: EV_EFI_VARIABLE_DRIVER_CONFIG size: 0x26 digest: 734424c9fe8fc71716c42096f4b74c88733b175e
PCR: 7 type: EV_SEPARATOR size: 0x4 digest: 9069ca78e7450a285173431b3e52c5c25299e473
PCR: 1 type: EV_EFI_VARIABLE_BOOT size: 0x3e digest: 252f8ebb85340290b64f4b06a001742be8e5cab6
PCR: 1 type: EV_EFI_VARIABLE_BOOT size: 0x6e digest: 22a4f6ee9af6dba01d3528deb64b74b582fc182b
PCR: 1 type: EV_EFI_VARIABLE_BOOT size: 0x80 digest: b7811d5bf30a7efd4e385c6179fe10d9290bb9e8
PCR: 1 type: EV_EFI_VARIABLE_BOOT size: 0x84 digest: 425e502c24fc924e231e0a62327b6b7d1f704573
PCR: 1 type: EV_EFI_VARIABLE_BOOT size: 0x9a digest: 0b5d2c98ac5de6148a4a1490ff9d5df69039f04e
PCR: 1 type: EV_EFI_VARIABLE_BOOT size: 0xbd digest: 20bd5f402271d57a88ea314fe35c1705956b1f74
PCR: 1 type: EV_EFI_VARIABLE_BOOT size: 0x88 digest: df5d6605cb8f4366d745a8464cfb26c1efdc305c
PCR: 4 type: EV_EFI_ACTION size: 0x28 digest: cd0fdb4531a6ec41be2753ba042637d6e5f7f256
PCR: 0 type: EV_SEPARATOR size: 0x4 digest: 9069ca78e7450a285173431b3e52c5c25299e473
PCR: 1 type: EV_SEPARATOR size: 0x4 digest: 9069ca78e7450a285173431b3e52c5c25299e473
PCR: 2 type: EV_SEPARATOR size: 0x4 digest: 9069ca78e7450a285173431b3e52c5c25299e473
PCR: 3 type: EV_SEPARATOR size: 0x4 digest: 9069ca78e7450a285173431b3e52c5c25299e473
PCR: 4 type: EV_SEPARATOR size: 0x4 digest: 9069ca78e7450a285173431b3e52c5c25299e473
PCR: 5 type: EV_SEPARATOR size: 0x4 digest: 9069ca78e7450a285173431b3e52c5c25299e473
$ tpm2_pcrlist
sha1 :
0 : 35bd1786b6909daad610d7598b1d620352d33b8a
1 : ec0511e860206e0af13c31da2f9e943fb6ca353d
2 : b2a83b0ebf2f8374299a5b2bdfc31ea955ad7236
3 : b2a83b0ebf2f8374299a5b2bdfc31ea955ad7236
4 : 45a323382bd933f08e7f0e256bc8249e4095b1ec
5 : d16d7e629fd8d08ca256f9ad3a3a1587c9e6cc1b
6 : b2a83b0ebf2f8374299a5b2bdfc31ea955ad7236
7 : 518bd167271fbb64589c61e43d8c0165861431d8
8 : 0000000000000000000000000000000000000000
9 : 0000000000000000000000000000000000000000
10 : 0000000000000000000000000000000000000000
11 : 0000000000000000000000000000000000000000
12 : 0000000000000000000000000000000000000000
13 : 0000000000000000000000000000000000000000
14 : 0000000000000000000000000000000000000000
15 : 0000000000000000000000000000000000000000
16 : 0000000000000000000000000000000000000000
17 : ffffffffffffffffffffffffffffffffffffffff
18 : ffffffffffffffffffffffffffffffffffffffff
19 : ffffffffffffffffffffffffffffffffffffffff
20 : ffffffffffffffffffffffffffffffffffffffff
21 : ffffffffffffffffffffffffffffffffffffffff
22 : ffffffffffffffffffffffffffffffffffffffff
23 : 0000000000000000000000000000000000000000
sha256 :
0 : 9ae903dbae3357ac00d223660bac19ea5c021499a56201104332ab966631ce2c
1 : acc611d90245cf04e77b0ca94901f90e7fa54770f0426f53c3049b532243d1b8
2 : 3d458cfe55cc03ea1f443f1562beec8df51c75e14a9fcf9a7234a13f198e7969
3 : 3d458cfe55cc03ea1f443f1562beec8df51c75e14a9fcf9a7234a13f198e7969
4 : 7a94ffe8a7729a566d3d3c577fcb4b6b1e671f31540375f80eae6382ab785e35
5 : a5ceb755d043f32431d63e39f5161464620a3437280494b5850dc1b47cc074e0
6 : 3d458cfe55cc03ea1f443f1562beec8df51c75e14a9fcf9a7234a13f198e7969
7 : 65caf8dd1e0ea7a6347b635d2b379c93b9a1351edc2afc3ecda700e534eb3068
8 : 0000000000000000000000000000000000000000000000000000000000000000
9 : 0000000000000000000000000000000000000000000000000000000000000000
10 : 0000000000000000000000000000000000000000000000000000000000000000
11 : 0000000000000000000000000000000000000000000000000000000000000000
12 : 0000000000000000000000000000000000000000000000000000000000000000
13 : 0000000000000000000000000000000000000000000000000000000000000000
14 : 0000000000000000000000000000000000000000000000000000000000000000
15 : 0000000000000000000000000000000000000000000000000000000000000000
16 : 0000000000000000000000000000000000000000000000000000000000000000
17 : ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
18 : ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
19 : ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
20 : ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
21 : ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
22 : ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
23 : 0000000000000000000000000000000000000000000000000000000000000000
sha384 :
The PhysicalPresenceLib is required, it sets some variables, but the
firmware doesn't act on it yet.
Laszlo Ersek explained on the list why Tpm2DeviceLib has to be
resolved differently for DXE_DRIVER modules in general and for
"Tcg2Dxe.inf" specifically:
* We have a library class called Tpm2DeviceLib -- this is basically the
set of APIs declared in "SecurityPkg/Include/Library/Tpm2DeviceLib.h".
Its leading comment says "This library abstract how to access TPM2
hardware device".
There are two *sets* of APIs in "Tpm2DeviceLib.h":
(a) functions that deal with the TPM2 device:
- Tpm2RequestUseTpm(),
- Tpm2SubmitCommand()
This set of APIs is supposed to be used by clients that *consume*
the TPM2 device abstraction.
(b) the function Tpm2RegisterTpm2DeviceLib(), which is supposed to be
used by *providers* of various TPM2 device abstractions.
* Then, we have two implementations (instances) of the Tpm2DeviceLib class:
(1) SecurityPkg/Library/Tpm2DeviceLibTcg2/Tpm2DeviceLibTcg2.inf
(2) SecurityPkg/Library/Tpm2DeviceLibRouter/Tpm2DeviceLibRouterDxe.inf
(1) The first library instance ("Tpm2DeviceLibTcg2.inf") implements the
APIs listed under (a), and it does not implement (b) -- see
EFI_UNSUPPORTED. In other words, this lib instance is strictly meant for
drivers that *consume* the TPM2 device abstraction. And, the (a) group
of APIs is implemented by forwarding the requests to the TCG2 protocol.
The idea here is that all the drivers that consume the TPM2 abstraction
do not have to be statically linked with a large TPM2 device library
instance; instead they are only linked (statically) with this "thin"
library instance, and all the actual work is delegated to whichever
driver that provides the singleton TCG2 protocol.
(2) The second library instance ("Tpm2DeviceLibRouterDxe.inf") is meant
for the driver that offers (produces) the TCG2 protocol. This lib
instance implements both (a) and (b) API groups.
* Here's how things fit together:
(i) The "SecurityPkg/Library/Tpm2DeviceLibDTpm/Tpm2InstanceLibDTpm.inf"
library instance (which has no lib class) is linked into "Tcg2Dxe.inf"
via NULL class resolution. This simply means that before the
"Tcg2Dxe.inf" entry point function is entered, the constructor function
of "Tpm2InstanceLibDTpm.inf" will be called.
(ii) This Tpm2InstanceLibDTpmConstructor() function calls API (b), and
registers its own actual TPM2 command implementation with the
"Tpm2DeviceLibRouter" library instance (also linked into the Tcg2Dxe
driver). This provides the back-end for the API set (a).
TCG2 protocol provider (Tcg2Dxe.inf driver) launches
|
v
NULL class: Tpm2InstanceLibDTpm instance construction
|
v
Tpm2DeviceLib class: Tpm2DeviceLibRouter instance
backend registration for API set (a)
(iii) The Tcg2Dxe driver exposes the TCG2 protocol.
(iv) A TPM2 consumer calls API set (a) via lib instance (1). Such calls
land in Tcg2Dxe, via the protocol.
(v) Tcg2Dxe serves the protocol request by forwarding it to API set (a)
from lib instance (2).
(vi) Those functions call the "backend" functions registered by
Tpm2DeviceLibDTpm in step (ii).
TPM 2 consumer driver
|
v
Tpm2DeviceLib class: Tpm2DeviceLibTcg2 instance
|
v
TCG2 protocol interface
|
v
TCG2 protocol provider: Tcg2Dxe.inf driver
|
v
Tpm2DeviceLib class: Tpm2DeviceLibRouter instance
|
v
NULL class: Tpm2InstanceLibDTpm instance
(via earlier registration)
|
v
TPM2 chip (actual hardware)
* So that is the "router" pattern in edk2. Namely,
- Consumers of an abstraction use a thin library instance.
- The thin library instance calls a firmware-global (singleton) service,
i.e. a PPI (in the PEI phase) or protocol (in the DXE phase).
- The PEIM providing the PPI, or the DXE driver providing the protocol,
don't themselves implement the actual service either. Instead they
offer a "registration" service too, and they only connect the incoming
"consumer" calls to the earlier registered back-end(s).
- The "registration service", for back-ends to use, may take various
forms.
It can be exposed globally to the rest of the firmware, as
another member function of the PPI / protocol structure. Then backends
can be provided by separate PEIMs / DXE drivers.
Or else, the registration service can be exposed as just another
library API. In this case, the backends are provided as NULL class
library instances, and a platform DSC file links them into the PEIM /
DXE driver via NULL class resolutions. The backend lib instances call
the registration service in their own respective constructor
functions.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This module will initialize TPM device, measure reported FVs and BIOS
version. We keep both SHA-1 and SHA-256 for the TCG 1.2 log format
compatibility, but the SHA-256 measurements and TCG 2 log format are
now recommended.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The Tcg2ConfigPei module informs the firmware globally about the TPM
device type, by setting the PcdTpmInstanceGuid PCD to the appropriate
GUID value. The original module under SecurityPkg can perform device
detection, or read a cached value from a non-volatile UEFI variable.
OvmfPkg's clone of the module only performs the TPM2 hardware detection.
This is what the module does:
- Check the QEMU hardware for TPM2 availability only
- If found, set the dynamic PCD "PcdTpmInstanceGuid" to
&gEfiTpmDeviceInstanceTpm20DtpmGuid. This is what informs the rest of
the firmware about the TPM type.
- Install the gEfiTpmDeviceSelectedGuid PPI. This action permits the
PEI_CORE to dispatch the Tcg2Pei module, which consumes the above PCD.
In effect, the gEfiTpmDeviceSelectedGuid PPI serializes the setting
and the consumption of the "TPM type" PCD.
- If no TPM2 was found, install gPeiTpmInitializationDonePpiGuid.
(Normally this is performed by Tcg2Pei, but Tcg2Pei doesn't do it if
no TPM2 is available. So in that case our Tcg2ConfigPei must do it.)
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Move the GlobalData.BuildOptionPcd before FdfParser() function and add
type check for Pcd item.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This information is to record which device requested which DMA buffer.
It can be used for DMA buffer analysis.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
After IOMMU is enabled in S3, original solution with SMM device
code (OpalPasswordSmm) to unlock OPAL device for S3 will not work
as the DMA operation will be aborted without granted DMA buffer.
Instead, this solution is to add OpalPasswordPei to eliminate
SMM device code, and OPAL setup UI produced by OpalPasswordDxe
will be updated to send requests (set password, update password,
and etc), and then the requests will be processed in next boot
before SmmReadyToLock, password and device info will be saved to
lock box used by OpalPasswordPei to unlock OPAL device for S3.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
With this flag, the LockBox can be restored in S3 resume only.
The LockBox can not be restored after SmmReadyToLock in normal boot
and after EndOfS3Resume in S3 resume.
It can not be set together with LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
if PcdDxeNxMemoryProtectionPolicy is enabled for EfiReservedMemoryType
of memory, #PF will be triggered for each APs after ExitBootServices
in SCRT test. The root cause is that AP wakeup code executed at that
time is stored in memory of type EfiReservedMemoryType (referenced by
global mReservedApLoopFunc), which is marked as non-executable.
This patch fixes this issue by setting memory of mReservedApLoopFunc to
be executable immediately after allocation.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The root cause is an unnecessary check to Size parameter in function
AdjustMemoryS(). It will cause one standalone free page (happen to have
Guard page around) in the free memory list cannot be allocated, even if
the requested memory size is less than a page.
//
// At least one more page needed for Guard page.
//
if (Size < (SizeRequested + EFI_PAGES_TO_SIZE (1))) {
return 0;
}
The following code in the same function actually covers above check
implicitly. So the fix is simply removing above check.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Boolean values do not need to use explicit comparisons
to TRUE or FALSE.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by:Chao Zhang <chao.b.zhang@intel.com>
I recently added the gcc-8 specific "-Wno-stringop-truncation" and
"-Wno-restrict" options to BUILD_CFLAGS, both for "Darwin" (XCODE5 /
clang, OSX) and otherwise (gcc, Linux / Cygwin).
I also regression-tested the change with gcc-4.8 on Linux -- gcc-4.8 does
not know either of the (gcc-8 specific) "-Wno-stringop-truncation" and
"-Wno-restrict" options, yet the build completed fine (by GCC design).
Regarding OSX, my expectation was that
- XCODE5 / clang would either recognize these warnings options (because
clang does recognize most -W options of gcc),
- or, similarly to gcc, clang would simply ignore the "-Wno-xxx" flags
that it didn't recognize.
Neither is the case; the new flags have broken the BaseTools build on OSX.
Revert them (for OSX only).
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reported-by: Liming Gao <liming.gao@intel.com>
Fixes: 1d212a83df
Fixes: 9222154ae7
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
If enabled, NX memory protection feature will mark some types of active
memory as NX (non-executable), which includes the first page of the stack.
This will overwrite the attributes of the first page of the stack if the
stack guard feature is also enabled.
The solution is to override the attributes setting to the first page of
the stack by adding back the 'EFI_MEMORY_RP' attribute when the stack
guard feature is enabled.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The commit rewrites the logic in function
InitializeDxeNxMemoryProtectionPolicy() for handling the first page
(page 0) when NULL pointer detection feature is enabled.
Instead of skip setting the page 0, the codes will now override the
attribute setting of page 0 by adding the 'EFI_MEMORY_RP' attribute.
The purpose is to make it easy for other special handling of pages
(e.g. the first page of the stack when stack guard feature is enabled).
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Function BmRepairAllControllers may recursively call itself if some
driver health protocol returns EfiDriverHealthStatusReconnectRequired.
However, driver health protocol of some buggy third party driver may
always return such status even after one and another reconnect. The
endless iteration will cause stack overflow and then system exception,
and it may be not easy to find that the exception is actually caused
by stack overflow.
So we limit the number of reconnect retry to 10 to improve code
robustness, and DEBUG_CODE is moved ahead before recursive repair to
track the repair result.
We also remove a duplicated declaration of BmRepairAllControllers() in
InternalBm.h in this patch, for it is only a trivial change.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
CompatibleRangeTest() contains two bugs:
1. It doesn't reject the memory above 16MB
2. it cannot handle the case when the partial or whole range of
requested memory is already tested.
The patch fixes the two bugs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The generic timer driver only EOIs the timer interrupt if
the ISTATUS bit is set. This is completely fine if you pretend
that spurious interrupts do not exist. But as a matter of fact,
they do, and the first one will leave the interrupt activated
at the GIC level, making sure that no other interrupt can make
it anymore.
Making sure that each interrupt Ack is paired with an EOI is the
way to go. Oh, and enabling the interrupt each time it is taken
is completely pointless. We entered this function for a good
reason...
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add PcdVTdPeiDmaBufferSize(S3) to replace the hard coded value
TOTAL_DMA_BUFFER_SIZE and TOTAL_DMA_BUFFER_SIZE_S3 in IntelVTdPmrPei.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
NULL is returned to Mapping when Operation is BusMasterCommonBuffer or
BusMasterCommonBuffer64 in PeiIoMmuMap().
So Mapping == NULL is valid when calling PeiIoMmuUnmap().
940dbd071e wrongly changed EFI_SUCCESS
to EFI_INVALID_PARAMETER when Mapping == NULL in PeiIoMmuUnmap().
This patch is to correct it.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Based on the following patch from Brijesh Singh <brijesh.singh@amd.com>:
[PATCH v2 1/2] OvmfPkg/AmdSevDxe: Clear the C-bit from SMM Saved State
http://mid.mail-archive.com/20180228161415.28723-2-brijesh.singh@amd.comhttps://lists.01.org/pipermail/edk2-devel/2018-February/022016.html
Original commit message from Brijesh:
> When OVMF is built with SMM, SMMSaved State area (SMM_DEFAULT_SMBASE +
> SMRAM_SAVE_STATE_MAP_OFFSET) contains data which need to be accessed by
> both guest and hypervisor. Since the data need to be accessed by both
> hence we must map the SMMSaved State area as unencrypted (i.e C-bit
> cleared).
>
> This patch clears the SavedStateArea address before SMBASE relocation.
> Currently, we do not clear the SavedStateArea address after SMBASE is
> relocated due to the following reasons:
>
> 1) Guest BIOS never access the relocated SavedStateArea.
>
> 2) The C-bit works on page-aligned address, but the SavedStateArea
> address is not a page-aligned. Theoretically, we could roundup the
> address and clear the C-bit of aligned address but looking carefully we
> found that some portion of the page contains code -- which will causes a
> bigger issue for the SEV guest. When SEV is enabled, all the code must
> be encrypted otherwise hardware will cause trap.
Changes by Laszlo:
- separate AmdSevDxe bits from SmmCpuFeaturesLib bits;
- spell out PcdLib dependency with #include and in LibraryClasses;
- replace (SMM_DEFAULT_SMBASE + SMRAM_SAVE_STATE_MAP_OFFSET) calculation
with call to new MemEncryptSevLocateInitialSmramSaveStateMapPages()
function;
- consequently, pass page-aligned BaseAddress to
MemEncryptSevClearPageEncMask();
- zero the pages before clearing the C-bit;
- pass Flush=TRUE to MemEncryptSevClearPageEncMask();
- harden the treatment of MemEncryptSevClearPageEncMask() failure.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Based on the following patch from Brijesh Singh <brijesh.singh@amd.com>:
[PATCH v2 1/2] OvmfPkg/AmdSevDxe: Clear the C-bit from SMM Saved State
http://mid.mail-archive.com/20180228161415.28723-2-brijesh.singh@amd.comhttps://lists.01.org/pipermail/edk2-devel/2018-February/022016.html
Once PiSmmCpuDxeSmm relocates SMBASE for all VCPUs, the pages of the
initial SMRAM save state map can be re-encrypted (including zeroing them
out after setting the C-bit on them), and they can be released to DXE for
general use (undoing the allocation that we did in PlatformPei's
AmdSevInitialize() function).
The decryption of the same pages (which will occur chronologically
earlier) is implemented in the next patch; hence the "re-encryption" part
of this patch is currently a no-op. The series is structured like this in
order to be bisection-friendly. If the decryption patch preceded this
patch, then an info leak would be created while standing between the
patches.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
In the next two patches, we'll temporarily decrypt the pages containing
the initial SMRAM save state map, for SMBASE relocation. (Unlike the
separate, relocated SMRAM save state map of each VCPU, the original,
shared map behaves similarly to a "common buffer" between guest and host.)
The decryption will occur near the beginning of the DXE phase, in
AmdSevDxe, and the re-encryption will occur in PiSmmCpuDxeSmm, via OVMF's
SmmCpuFeaturesLib instance.
There is a non-trivial time gap between these two points, and the DXE
phase might use the pages overlapping the initial SMRAM save state map for
arbitrary purposes meanwhile. In order to prevent any information leak
towards the hypervisor, make sure the DXE phase puts nothing in those
pages until re-encryption is done.
Creating a memalloc HOB for the area in question is safe:
- the temporary SEC/PEI RAM (stack and heap) is based at
PcdOvmfSecPeiTempRamBase, which is above 8MB,
- the permanent PEI RAM (installed in PlatformPei's PublishPeiMemory()
function) never starts below PcdOvmfDxeMemFvBase, which is also above
8MB.
The allocated pages can be released to the DXE phase after SMBASE
relocation and re-encryption are complete.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
In the next three patches, we're going to modify three modules under
OvmfPkg. When OVMF is built with -D SMM_REQUIRE and runs in an SEV guest,
each affected module will have to know the page range that covers the
initial (pre-SMBASE relocation) SMRAM save state map. Add a helper
function to MemEncryptSevLib that calculates the "base address" and
"number of pages" constants for this page range.
(In a RELEASE build -- i.e., with assertions disabled and optimization
enabled --, the helper function can be compiled to store two constants
determined at compile time.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Document the
"Cr3BaseAddress" parameter, and correct several parameter references.
Replace a "clear" reference to the C-bit with a "set" reference.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Document the
"Cr3BaseAddress" parameter, and correct several parameter references.
Replace a "set" reference to the C-bit with a "clear" reference.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Replace any
leftover "clear" references to the C-bit with "set" references. Also
remove any excess space in the comment block, and unindent the trailing
"**/" if necessary. Correct several parameter references.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Also remove
any excess space in the comment block, and unindent the trailing "**/" if
necessary. Correct several parameter references.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Also remove
any excess space in the comment block, and unindent the trailing "**/" if
necessary.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Because terminal doesn't support shift and toggle key state,
ReadKeyStrokeEx just sets the two states to 0.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
gcc-8 (which is part of Fedora 28) enables the new warning
"-Wstringop-overflow" in "-Wall". This warning is documented in detail at
<https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html>; the
introduction says
> Warn for calls to string manipulation functions such as memcpy and
> strcpy that are determined to overflow the destination buffer.
It breaks the BaseTools build with:
> GenVtf.c: In function 'ConvertVersionInfo':
> GenVtf.c:132:7: error: 'strncpy' specified bound depends on the length
> of the source argument [-Werror=stringop-overflow=]
> strncpy (TemStr + 4 - Length, Str, Length);
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> GenVtf.c:130:14: note: length computed here
> Length = strlen(Str);
> ^~~~~~~~~~~
It is a false positive because, while the bound equals the length of the
source argument, the destination pointer is moved back towards the
beginning of the destination buffer by the same amount (and this amount is
range-checked first, so we can't precede the start of the dest buffer).
Replace both strncpy() calls with memcpy().
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Cole Robinson <crobinso@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reported-by: Cole Robinson <crobinso@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
gcc-8 (which is part of Fedora 28) enables the new warning
"-Wrestrict" in "-Wall". This warning is documented in detail
at <https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html>; the
introduction says
> Warn when an object referenced by a restrict-qualified parameter (or, in
> C++, a __restrict-qualified parameter) is aliased by another argument,
> or when copies between such objects overlap.
It breaks the BaseTools build (in the Brotli compression library) with:
> In function 'ProcessCommandsInternal',
> inlined from 'ProcessCommands' at dec/decode.c:1828:10:
> dec/decode.c:1781:9: error: 'memcpy' accessing between 17 and 2147483631
> bytes at offsets 16 and 16 overlaps between 17 and 2147483631 bytes at
> offset 16 [-Werror=restrict]
> memcpy(copy_dst + 16, copy_src + 16, (size_t)(i - 16));
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> In function 'ProcessCommandsInternal',
> inlined from 'SafeProcessCommands' at dec/decode.c:1833:10:
> dec/decode.c:1781:9: error: 'memcpy' accessing between 17 and 2147483631
> bytes at offsets 16 and 16 overlaps between 17 and 2147483631 bytes at
> offset 16 [-Werror=restrict]
> memcpy(copy_dst + 16, copy_src + 16, (size_t)(i - 16));
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Paolo Bonzini <pbonzini@redhat.com> analyzed the Brotli source in detail,
and concluded that the warning is a false positive:
> This seems safe to me, because it's preceded by:
>
> uint8_t* copy_dst = &s->ringbuffer[pos];
> uint8_t* copy_src = &s->ringbuffer[src_start];
> int dst_end = pos + i;
> int src_end = src_start + i;
> if (src_end > pos && dst_end > src_start) {
> /* Regions intersect. */
> goto CommandPostWrapCopy;
> }
>
> If [src_start, src_start + i) and [pos, pos + i) don't intersect, then
> neither do [src_start + 16, src_start + i) and [pos + 16, pos + i).
>
> The if seems okay:
>
> (src_start + i > pos && pos + i > src_start)
>
> which can be rewritten to:
>
> (pos < src_start + i && src_start < pos + i)
>
> Then the numbers are in one of these two orders:
>
> pos <= src_start < pos + i <= src_start + i
> src_start <= pos < src_start + i <= pos + i
>
> These two would be allowed by the "if", but they can only happen if pos
> == src_start so they degenerate to the same two orders above:
>
> pos <= src_start < src_start + i <= pos + i
> src_start <= pos < pos + i <= src_start + i
>
> So it is a false positive in GCC.
Disable the warning for now.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Cole Robinson <crobinso@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reported-by: Cole Robinson <crobinso@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
gcc-8 (which is part of Fedora 28) enables the new warning
"-Wstringop-truncation" in "-Wall". This warning is documented in detail
at <https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html>; the
introduction says
> Warn for calls to bounded string manipulation functions such as strncat,
> strncpy, and stpncpy that may either truncate the copied string or leave
> the destination unchanged.
It breaks the BaseTools build with:
> EfiUtilityMsgs.c: In function 'PrintMessage':
> EfiUtilityMsgs.c:484:9: error: 'strncat' output may be truncated copying
> between 0 and 511 bytes from a string of length 511
> [-Werror=stringop-truncation]
> strncat (Line, Line2, MAX_LINE_LEN - strlen (Line) - 1);
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> EfiUtilityMsgs.c:469:9: error: 'strncat' output may be truncated copying
> between 0 and 511 bytes from a string of length 511
> [-Werror=stringop-truncation]
> strncat (Line, Line2, MAX_LINE_LEN - strlen (Line) - 1);
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> EfiUtilityMsgs.c:511:5: error: 'strncat' output may be truncated copying
> between 0 and 511 bytes from a string of length 511
> [-Werror=stringop-truncation]
> strncat (Line, Line2, MAX_LINE_LEN - strlen (Line) - 1);
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The right way to fix the warning would be to implement string concat with
snprintf(). However, Microsoft does not appear to support snprintf()
before VS2015
<https://stackoverflow.com/questions/2915672/snprintf-and-visual-studio-2010>,
so we just have to shut up the warning. The strncat() calls flagged above
are valid BTW.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Cole Robinson <crobinso@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Current BLOCK IO API code is using TPL_CALLBACK,
but comment is saying TPL_NOTIFY.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Within function UpdateDisplayFromHistory():
When getting a character with different attribute with the current one,
the statement to compare the character with a 'NULL' char should be:
*StringSegmentEnd != CHAR_NULL
rather than:
StringSegmentEnd != CHAR_NULL
This commit resolves this typo.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
When a USB device reports failure for a CMD and REQUEST SENSE returns
Media Changed key, UsbBootExecCmdWithRetry() stops to retry CMD and
returns EFI_MEDIA_CHANGED to caller.
For this case, the CMD should be retried until success, getting
NoMedia sense key or timeout.
The patch updates UsbBootExecCmdWithRetry() to follow the above
rule so EFI_MEDIA_CHANGED is no longer returned.
UsbBootDetectMedia() is updated accordingly.
Because UsbBootGetParams() is called for new plugged USB storage,
and some USB storage devices may report Media Changed key,
UsbBootGetParams() is updated to treat it as a Success.
This change could fix the issue that some USB storage devices
cannot be detected.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This reverts commit a662afb5b0.
* MdeModulePkg/UsbStorage: Fix "map -r" cannot detect media change
The above commit fixed the following issue:
When system boots to Shell without CDROM inside USB CDROM drive,
and then user inserts the CDROM with Eltorito file system,
"map -r" cannot show the new ELtorito file system.
The commit caused EFI_MEDIA_CHANGED status returned from
UsbBootDetectMedia().
But that fix exposes another issue:
When issuing ReadCapacity command to certain USB key
(Kingston DataTraveler G3 8GB) after it's hot-plugged, USB device
returns STALL error and RequestSense command returns media changed
sense data. (Most of the USB keys return SUCCESS for ReadCapacity
command after hot-plug.)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This reverts commit 6461344c31.
* MdeModulePkg/UsbMass: Fix hot-plug USB CDROM can't be recognized
UsbBootExecCmd() only calls UsbBootRequestSense() to get sense key
when CMD fails.
When POWER ON (29h) ASC returns from REQUEST SENSE, implementation
should retry the CMD, instead of treating this as a SUCCESS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Per UEFI spec, FibreEx.WWN, FibreEx.Lun, SasEx.Address, SasEx.Lun
and iSCSI.Lun are all 8-byte array with byte #0 in the left.
It means "0102030405060708" should be converted to:
UINT8[8] = {01, 02, 03, 04, 05, 06, 07, 08}
or UINT64 = {0807060504030201}
Today's implementation wrongly uses the reversed order.
The patch fixes this issue by using StrHexToBytes().
Copy this solution from MdePkg Hash version d0196be.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
If protocol string is not specified, default TCP(0) should be used.
Today's implementation wrongly sets to 1 for this case.
Copy the fix solution from MdePkg Hash version e6c80aea.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Per UEFI spec, iSCSI.Lun is a 8-byte array with byte #0 in the left.
It means "0102030405060708" should be converted to:
UINT8[8] = {01, 02, 03, 04, 05, 06, 07, 08}
or UINT64 = {0807060504030201}
Today's implementation wrongly uses the reversed order.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jie Lin <jie.lin@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
If protocol string is not specified, default TCP(0) should be used.
Today's implementation wrongly sets to 1 for this case.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add gEdkiiS3SmmInitDoneGuid, after S3 SMM initialization is done and
before S3 boot script is executed, this GUID is installed as PPI in
PEI and protocol in SMM environment. It allows for PEIMs or SMM
drivers to hook this point and do the required tasks.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
when the SECTION FV_IMAGE = $(XX)/XX.Fv, the Fv file should relative to
WORKSPACE, so when we search the XX.Fv.txt file, we should search the
path relative to workspace first.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
For the case that the structure PCD has no value assignment in DSC,
but has value assignment in command line.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Case 1. A Pcd has no default sku setting in DSC.
Case 2. Build as Single SKU.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. Handle the Pcd maxsize issue for the case
that the length of Pcd value from CommandLine
bigger that its maxsize
2. The Pcd value override in commandline.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
DSC Components section support flexible PCD, and for binary driver, we
need patch this value. Update the split char ',' not ', ' because some
value may have space, while others may not have this space.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
v3: LaneEqualizationControl is changed to be an array.
v2: The structure is updated to include all the fields defined
in the PCI-E specification.
The header includes Physical Layer PCI Express Extended Capability definitions
described in section 7.7.5 of PCI Express Base Specification rev. 4.0.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Felix Polyudov <felixp@ami.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The default value of PcdExtFpdtBootRecordPadSize is 0x20000
But the following commit in master update it to 0 by mistake.
SHA-1: 052c98ce24
Subject: MdeModulePkg: Add ResetSystemPei PEIM
This patch is to restore the value.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Currently DxeCorePerformanceLib will get SMM performance data based
on SMM communication handler. If SMM communication handler returns error,
the library will ASSERT. In fact, if SMM perf data is not found.
DXE perf data can still be dumped. So using status check instead of
ASSERT is better.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The previous commit 137ed15511
* MdeModulePkg/DebugLib: Print partial when format string is too long
copies partial format string to DEBUG_INFO buffer but when parsing
the format modifier, the original format string is still used.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The issue was enrolled by the commit of ceec3638. One of the change in the commit
was to return the status from NetMapIterate in Udp6Groups function. But it should
not return EFI_ABORTED directly in case McastIp is not NULL, which means to terminate
the iteration and leave the McastIp successfully.
Cc: Wang Fan <fan.wang@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
For IPv6 case, if one invalid URL returned from DHCP server, HttpBootDxe
driver could not retrieve the URL host address from DNS server. In such a
case, the error message should be printed as:
Error: Could not retrieve the host address from DNS server.
Instead of:
Error: Could not discover the boot information for DHCP server.
Then, we can still output as following:
Error: Could not retrieve NBP file size from HTTP server.
Besides, currently implementation in HttpBootLoadFile will always output
error message even the HTTP process is correct.
This patch is to fix above issue.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The root cause is the byte array value in the driver Pcd, some bytes
have additional space character, while the value in DSC file doesn't
have this space, it cause the string compare return false, so we remove
the extra space.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When run GenFds, GlobalData.gConfDirectory is None, On Linux
self._ToolChainFamily default Value is "MSFT", and then
generate the wrong PcdValueInit Makefile
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Neither the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL nor the EFI_CPU_IO2_PROTOCOL
impose any restrictions when it comes to the range of valid I/O
addresses. Even so, the 'mm' command in -IO mode refuses to perform
accesses to addresses >= 0xffff.
It is not up to 'mm' to impose this restriction, so remove it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
When generate build report, Tool will get the info like size, Fv Name,
etc from the xx.Fv.txt file and add these info into the build report.
This patch support the xx.Fv.txt to use absolute file path format since
user may provide specified FV path.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Instead of completely removing the memory occupied by the primary PrePi
FV from the memory map, thereby making it inaccessible to the OS, mark
it as boot services data. This will ensure that the memory is left
untouched by the firmware, but will release it to the OS when it calls
ExitBootServices().
Note that for reasons that are not entirely clear, this only works as
desired if the memory allocation HOB and the resource descriptor HOB
that describe the region are identical in offset and size, and so we
still need to iterate over the descriptors and split them up.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Commit 8ae5fc1829 ("ArmPlatformPkg/MemoryInitPeiLib: don't reserve
primary FV in memory") deleted the code that removes the memory covering
the primary firmware volume from the memory map. The assumption was that
this is no longer necessary now that we no longer expose compression and
PE/COFF loader library code from the PrePi module to DXE core.
However, the FV is still declared, and so code may attempt to access it
anyway, which may cause unexpected results depending on whether the
memory has been reused for other purposes in the mean time. So revert
this change in preparation of dealing with this in a better way.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Optimized the PcdValueInit.c size by abstract the common logic in the funciton.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
If Structure PCD field is assigned as GUID format, its data type should be
the fixed GUID structure. No flexible check is required.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add cache for building PcdValueInit.c. If PcdValueInit.c is not changed,
it will not be regenerated.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. the issue in the overriding value from command line.
2. dec fully value < dec field assign value <
dsc fully value < dsc field assign value
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Clang's preprocessor behaves differently from GCC's, and produces
intermediate device tree source that still contains #pragma pack()
and other directives that the device tree compiler chokes on.
For assembling device tree sources, it matters very little which
preprocessor is being used, so let's just use GNU CPP explicitly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This issue is introduced at following commit, which tried to add stack
switch support on behalf of Stack Guard feature.
0ff5aa9cae
The field KnownGoodStackTop in CPU_EXCEPTION_INIT_DATA is initialized to
the start address of array mNewStack. This is wrong. It must be the end
of mNewStack. This patch fixes this mistake.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The case is: define a VOID* pcd in DEC file, eg: Value is {0x1}.
then override this PCD on DSC component section, eg: Value is
{0x1, 0x2, 0x3}, the max size of this PCD is calculate wrong
which cause build error.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
v2: Add [LibraryClasses] section in INF file and refine coding style.
There are VS2015 NOOPT IA32 build failure like below in BaseSafeIntLib.
XXX.lib(XXX.obj): error LNK2001: unresolved external symbol __allmul
XXX.lib(XXX.obj): error LNK2001: unresolved external symbol __allshl
XXX.lib(XXX.obj): error LNK2001: unresolved external symbol __aullshr
This patch replaces direct shift/multiplication of 64-bit integer
with related function call to fix these failure.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
1.The " and ' inside the string, must use escape character format
(\", \')
2.'string' and L'string' format in --pcd, it must be double quoted
first.
Some examples that to match --pcd format and DSC format
--pcd DSC format
L"ABC" L"ABC"
"AB\\\"C" "AB\"C"
"AB\\\'C" "AB\'C"
L"\'AB\\\"C\'" L'AB\"C'
"\'AB\\\'C\'" 'AB\'C'
H"{0, L\"AB\\\"B\", \'ab\\\"c\'}" {0, L"AB\"B", 'ab\"c'}
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
DebugEntry FileOffset is required to be updated to the virtual address if
the input image is converted to XIP image.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
For structure PCD, its field name is wrong and cause build failure. Its
build error message will output to let user aware what's wrong.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Feng Bob C <bob.c.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
New GUID definition is conflicted with GUID in Windows Kits guiddef.h.
GUID definition will be defined when it is undefined.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
CR3 has been used as structure field name in BaseLib IA32_TASK_STATE_SEGMENT.
Undefine CR3 to make sure there is no conflict to it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The issue that *_*_*_MAKE_FLAGS doesn't work in DSC [BuildOptions]
section. It means MAKE flags can't be set in platform DSC file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=650
Today's implementation converts the untested more reliable memory
from reserved GCD type to system memory GCD type.
Though it doesn't impact the return result of gBS->GetMemoryMap().
But it impacts the return result of gDS->GetMemorySpaceDescriptor().
The patch fixes the bug to convert the untested more reliable memory
from reserved GCD type to more reliable memory GCD type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=650
Today's implementation converts the untested more reliable memory
from reserved GCD type to system memory GCD type.
Though it doesn't impact the return result of gBS->GetMemoryMap().
But it impacts the return result of gDS->GetMemorySpaceDescriptor().
The patch fixes the bug to convert the untested more reliable memory
from reserved GCD type to more reliable memory GCD type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The updated Length value should be returned
for EFI_BUFFER_TOO_SMALL case.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
If PEIM image address doesn't meet with its section alignment, it will
load fail. PeiCore adds more debug message to report it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The commit places the check for MediaId at the beginning of Block IO
services:
RamDiskBlkIoReadBlocks and
RamDiskBlkIoWriteBlocks
This aligns with the Block IO protocol implementations for other
devices.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
For structure PCD, the field value may override in the command line,
so in the report when we print the field info we add *B Flag for those
field.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Use 2 passes when evaluating PCD values to discover
all the LABEL() operators and compute the byte offset
of each LABEL(). The 2nd pass then has the information
to replace the OFFSET_OF() operator with the computed
byte offset. The 2 passes allows OFFSET_OF() to be used
before a LABEL() is declared.
fixes:https://bugzilla.tianocore.org/show_bug.cgi?id=880
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Switch all users of ArmVirt.dsc.inc to the new DebugLib implementation
that was created especially for DXE_RUNTIME_DRIVER modules, ensuring
that DEBUG() calls do not touch the UART at runtime.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Introduce a variant of BaseDebugLibSerialPort that behaves correctly with
regards to the use of the serial port after ExitBootServices(). At boot
time, all DEBUG() prints and ASSERT() invocations are executed normally.
At runtime, DEBUG() prints are dropped entirely, and ASSERT()s omit the
serial output as well, and only perform the configured post-ASSERT()
action, i.e., issue a CPU breakpoint or enter a deadloop.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Turns out all .vfr files in the tree interacting with DynamicPcds
manually copy the same set of EFI_VARIABLE_* definitions, since the rest
of UefiMultiPhase.h is incompatible with VfrCompile.
For now, reshuffle these definitions to the start of the file, and put
the rest of the file behind #ifndef VFRCOMPILE to permit direct
inclusion in .vfr source files.
https://bugzilla.tianocore.org/show_bug.cgi?id=878 has been raised to
request VfrCompile is extended to support the original format.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Issue:
Reply for first ping packet was getting dropped.
Cause:
Sometimes reply message comes even before trasmit
function returns, hence missing 1st reply
Fix:
Prepare the TxList before calling Transmit function.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
when defined SKUID_IDENTIFIER = DEFAULT|TEST in DSC [Defines] section,
per spec it means current SKUID is single, the bug is build report print
both DEFAULT and TEST info, it should only print TEST.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Per FDF spec, INF statement must use a .inf file, we add this error
check.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Original BaseTools source build append WindowsLike path to PATH Env,
while WINDDK installation has a "build.exe", if user place WINDDK
folder to PATH either during WINDDK installation or manually, it will
block the BaseTools' build.bat.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
If we have to negate UnsignedResult (due to exactly one of Multiplicand
and Multiplier being negative), and UnsignedResult is exactly
MIN_INT64_MAGNITUDE (value 2^63), then the statement
*Result = - ((INT64)UnsignedResult);
invokes both implementation-defined behavior and undefined behavior.
First, MIN_INT64_MAGNITUDE is not representable as INT64, therefore the
result of the (inner) conversion
(INT64)MIN_INT64_MAGNITUDE
is implementation-defined, or an implementation-defined signal is raised,
according to ISO C99 6.3.1.3p3.
Second, if we assume that the C language implementation defines the
conversion to INT64 simply as reinterpreting the bit pattern
0x8000_0000_0000_0000 as a signed integer in two's complement
representation, then the conversion immediately produces the negative
value MIN_INT64 (value -(2^63)). In turn, the (outer) negation
-(MIN_INT64)
invokes undefined behavior, because the mathematical result of the
negation, namely 2^63, cannot be represented in an INT64 object. (Not even
mentioning the fact that the mathematical result would be incorrect.) In
practice, the undefined negation of MIN_INT64 happens to produce an
unchanged, valid-looking result on x86, i.e. (-(MIN_INT64)) == MIN_INT64.
We can summarize this as the undefined -- effectless -- negation canceling
out the botched -- auto-negating -- implementation-defined conversion.
Instead of relying on such behavior, dedicate a branch to this situation:
assign MIN_INT64 directly. The branch can be triggered e.g. by multiplying
(2^62) by (-2).
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
The definition of the MIN_INT64_MAGNITUDE macro is correct, but it's
harder to read than necessary: the sub-expression
(( (UINT64) - (MIN_INT64 + 1) ))
is doubly parenthesized. Reusing one pair of the outer parens, rewrite the
sub-expression (without change in meaning) so that the minus sign cannot
be mistaken for subtraction:
( (UINT64)(- (MIN_INT64 + 1)) )
The resultant macro definition matches the following expressions in
SafeInt64Mult():
> //
> // Avoid negating the most negative number.
> //
> UnsignedMultiplicand = ((UINT64)(- (Multiplicand + 1))) + 1;
and
> //
> // Avoid negating the most negative number.
> //
> UnsignedMultiplier = ((UINT64)(- (Multiplier + 1))) + 1;
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
The addition in the assignment
SignedResult = Augend + Addend;
is performed with unchecked INT64 operands. According to ISO C, if the
mathematical result of signed integer addition cannot be represented in
the result type, the behavior is undefined. (Refer to ISO C99 6.5p5.
6.2.5p9 only exempts unsigned integers, and 6.3.1.3p3 does not apply
because it treats the conversion of integers that have been successfully
evaluated first.)
Replace the after-the-fact result checking with checks on the operands,
and only perform the addition if it is safe.
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
The subtraction in the assignment
SignedResult = Minuend - Subtrahend;
is performed with unchecked INT64 operands. According to ISO C, if the
mathematical result of signed integer subtraction cannot be represented in
the result type, the behavior is undefined. (Refer to ISO C99 6.5p5.
6.2.5p9 only exempts unsigned integers, and 6.3.1.3p3 does not apply
because it treats the conversion of integers that have been successfully
evaluated first.)
Replace the after-the-fact result checking with checks on the operands,
and only perform the subtraction if it is safe.
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
Commit a099239015 ("EmbeddedPkg/FdtLib: Update FdtLib to v1.4.5")
updated our FdtLib implementation to a more recent upstream version,
but omitted fdt_overlay.c due to its ambiguous licensing situation.
This has been resolved now, so take the latest upstream version of
the file (which received no other modifications in the mean time)
and add it to FdtLib.
Note that fdt_overlay.c has a dependency on strtoul() which EDK does
not provide natively, so add a private implementation that wraps the
BaseLib routines that do roughly the same.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In below calling stack:
UsbBootIsUnitReady()
UsbBootExecCmdWithRetry()
UsbBootExecCmd()
UsbBootRequestSense()
When USB CDROM is hot-plugged, UsbBootRequestSense() retrieves sense
key (6 = UnitAttention), additional sense code (29h = Power ON).
But it wrongly maps such sense data to Device Error status.
It causes UsbBootExecCmd() executed again.
In the second time call to UsbBootExecCmd(), UsbBootRequestSense()
retrieves sense key (6 = UnitAttention), additional sense code
(28h = media changed).
The above analysis explains why hot-plug USB CDROM cannot be
recognized after below commit:
SHA1 a662afb5b0
* MdeModulePkg/UsbStorage: Fix "map -r" cannot detect media change,
which removes the media changed status check in UsbBootDetectMedia().
The proper fix to this problem is to map the ASC (additional sense
code 29h) properly to success status so that no second call to
UsbBootExecCmd() is made.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
After commit 20ddbc133f
* MdeModulePkg/ConSplitter: ReadKeyStrokeEx always return key state
When one physical console supports to report the shift key state,
the key data returned from ConSplitter driver at least carries
the shift key valid bit.
The patch fixes the edit/hexedit to accept Unicode (1) when
the no shift key is pressed or reported.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Since the pointer subtraction here is not performed by pointers to
elements of the same array object. This might lead to potential issues,
such behavior is undefined according to C11 standard.
Refine the pointer subtraction expressions by casting each pointer to
UINTN first and then perform the subtraction.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
v2:
* Refine the error handling returned from GetVariable.
This patch is to read the HttpTlsCipherList variable and configure it for the
later HTTPS session.
If the variable is not set by any platform, EFI_NOT_FOUND will be returned
from GetVariable service. In such a case, the default CipherList created in
TlsDxe driver will be used.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Kinney Michael D <michael.d.kinney@intel.com>
Cc: Zimmer Vincent <vincent.zimmer@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
v2:
* Rename the file/variable name.
This variable (HttpTlsCipherList) can be set by any platform that want to
control its own preferred Tls CipherList for the later HTTPS session.
The valid contents of variable must follow the TLS CipherList format defined
in RFC 5246. The valid length of variable must be an integral multiple of 2.
For example, if below cipher suites are preferred:
CipherSuite TLS_RSA_WITH_AES_128_CBC_SHA256 = {0x00,0x3C}
CipherSuite TLS_RSA_WITH_AES_256_CBC_SHA256 = {0x00,0x3D}
Then, the contents of variable should be:
{0x00,0x3C,0x00,0x3D}
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Kinney Michael D <michael.d.kinney@intel.com>
Cc: Zimmer Vincent <vincent.zimmer@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
TimerLib had to be resolved in commit 5ab97a64b5 ("ShellPkg/bcfg: Add
Shell Spec 2.2 modification functionality", 2017-03-01) because:
- the BCFG command started making calls to UefiBootManagerLib
(EfiBootManagerVariableToLoadOption(),
EfiBootManagerLoadOptionToVariable(), EfiBootManagerFreeLoadOption()),
- and "MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf"
depended on TimerLib.
Because TimerLib is platform-specific, but "ShellPkg/ShellPkg.dsc" is
meant to produce a UEFI shell binary that is platform-independent (see
"ShellBinPkg/ReadMe.txt"), we resolved TimerLib to
"BaseTimerLibNullTemplate.inf". (TimerLib functionality was never actually
needed on UefiBootManagerLib code paths that were exercised by the shell /
BCFG.)
Thanks to the last patch, UefiBootManagerLib no longer depends on
TimerLib, thus we can drop the TimerLib resolution entirely.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
In commit 3a039a567a ("MdeModulePkg/UefiBootManagerLib: Remove the
useless perf codes", 2018-02-12), the BmWriteBootToOsPerformanceData()
function was removed. No TimerLib API calls are left, thus remove the
TimerLib class dependency from "InternalBm.h" and "UefiBootManagerLib.inf"
as well.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
These are listed under "ShellPkg/Application/Shell/Shell.inf", but they
have been commented out ever since commit 345a0c8fce ("OvmfPkg: Add
support for UEFI shell", 2011-06-26). No such lib classes exist in edk2.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=682
Edit and HexEdit commands assume that SimpleTxtIn translates
Ctrl+<Alpha-Key> key combinations into Unicode control characters
(0x1-0x1A).
Such translation does not seem to be required by the UEFI spec.
Shell should not rely on implementation specific behavior.
It should instead use SimpleTextInEx to read Ctrl+<Alpha-Key> key
combinations.
The patch changes edit and hexedit to only consumes SimpleTextInEx
so that the implementation specific behavior dependency is removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reported-by: Felix <felixp@mail.ru>
Cc: Felix <felixp@mail.ru>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Shell core was enhanced to find the manual string in PE resource
section. But the finding algorithm is too strict: If the manual is
written beginning with:
.TH command 0 "descripton of command"
but user types "COMMAND.efi -?". The finding algorithm uses
case-sensitive compare between "command" and "COMMAND" resulting
in the manual cannot be found.
The patch fixes this issue by using existing ManFileFindTitleSection
and ManFileFindSections which compare command case-insensitive.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Our new performance infrastructure (edk2 trunk commit hash value:
SHA-1: 73fef64f14 ~
SHA-1: 115eae650b) can support to
dump performance date form ACPI table in OS. So we can remove
the old perf code to write performance data to OS.
Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: zwei4 <david.wei@intel.com>
Our new performance infrastructure (edk2 trunk commit hash value:
SHA-1: 73fef64f14 ~
SHA-1: 115eae650b) can support to
dump performance date form ACPI table in OS. So we can remove
the old perf code to write performance data to OS.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Our new performance infrastructure (edk2 trunk commit hash value:
SHA-1: 73fef64f14 ~
SHA-1: 115eae650b) can support to
dump performance date form ACPI table in OS. So we can remove
the old perf code to write performance data to OS.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
V2: Just update the commit message to reference the hash value of
new performance infrastructure.
Our new performance infrastructure (edk2 trunk commit hash value:
SHA-1: 73fef64f14 ~
SHA-1: 115eae650b) can support to
dump performance date form ACPI table in OS. So we can remove
the old perf code to write performance data to OS.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
V2: Just update the commit message to reference the hash value of
new performance infrastructure.
Our new performance infrastructure (edk2 trunk commit hash value:
SHA-1: 73fef64f14 ~
SHA-1: 115eae650b) can support to
dump performance date form ACPI table in OS. So we can remove
the old perf code to write performance data to OS.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
V2: Just update the commit message to reference the hash value of
new performance infrastructure.
Our new performance infrastructure (edk2 trunk commit hash value:
SHA-1: 73fef64f14 ~
SHA-1: 115eae650b)can support to
dump performance date form ACPI table in OS. So we can remove
the old perf code to write performance data to OS.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=800
Based on content from the following branch/commits:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport33bab4031aca516b1a612b9f111f2e
Use BmpSupportLib to convert a GOP BLT Buffer to the BMP graphics
image that is published in an ACPI BGRT table.
* Remove use of IndustryStandard/Bmp.h include file
* Remove mBmpImageHeaderTemplate. This is handled by BmpSupportLib
* Clean up code style with function prototypes at top
and all module global variables together
* Update SetBootLogo() to use SafeIntLib to check input parameters
for overflows.
* Remove internal function BgrtAcpiTableChecksum(). Use
CalculateCheckSum8() directly from BgrtReadyToBootEventNotify()
* Remove InstallBootGraphicsResourceTable(). Move all the code into
BgrtReadyToBootEventNotify() that is signaled at ready to boot.
* Remove all logic that converts a GOP BLT buffer to a BMP graphics image
and use BmpSupportLib function TranslateGopBltToBmp() instead.
* Use AllocatePool() instead of AllocatePages() to allocate copy of
BMP image that is provided by BGRT. This is required to be compatible
with BmpSupportLib function TranslateGopBltToBmp() that uses
AllocatePool().
* Zero OemId in BGRT header before filling in value from PCD.
* Get size of PcdAcpiDefaultOemId and only copy the the size of the PCD
if it is smaller than the size of the OemId field in the BGRT header.
* Use WriteUnaligned24() instead of CopyMem() for the OemTableId field
of the BGRT header.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
Commit e537d878 meant to, but failed to, remove PcdCacheEnable.
Address this, and get rid of this obsolete flag.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Commit f72df138 got rid of the use of PcdCacheEnabled, but failed to
actually drop it as a dependency for BeagleBoardLib.
Get rid of it, so the module will still build when the Pcd is _really_
removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
V2: Just update the commit message.
Add more perf entry to hook BootScriptDonePpi/EndOfPeiPpi/
EndOfS3Resume.
Add the new perf entry with Identifier
PERF_INMODULE_START_ID/PERF_INMODULE_END_ID which are defined
in new performance infrastructure (edk2 trunk commit hash value:
SHA-1: 73fef64f14 ~
SHA-1: 115eae650b).
PERF_INMODULE_START_ID/PERF_INMODULE_END_ID are general Identifier
which are used within a module.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
For a structure with a series of bit fields and used as a storage
in vfr file, and if the bit fields do not add up to the size of
the defined type.In the C code use sizeof() to get size of the
structure, the results may vary form the compiler(VS,GCC...).
But the size of the storage calculated by VfrCompiler is fixed
(calculate with alignment).To avoid the issue cased by above case,
we need to make the total width of the bit fields in the structure
aligned with the size of the defined type for these bit fields.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The Reset Notification protocol is added in UEFI spec to support
reset notification mechanism in the DXE phase.
This patch adds similar EDKII specific Reset Notification PPI to PEI
phase to provide the same support.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Because DxeResetSystemLib links to this library to provide
reset system services, change UefiRuntimeLib to support
the same set of module types as what DxeResetSystemLib does.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
The library class that provides services to generate a GUID specific
reset, parse the GUID from a GUID specific reset, and build the
ResetData buffer for any type of reset that requires extra data.
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Add a PEI instance of ResetSystemLib that calls the ResetSystem2()
service in the PEI Services Table.
Add a DXE instance of ResetSystemLib that calls the ResetSystem()
service in the UEFI Runtime Services Table.
These 2 library instances should be the default ResetSystemLib
mapping for most PEIMs and DXE drivers so all reset system requests
go through the core service.
Only the implementation of the core servies should use the
platform specific instance of the ResetSystemLib that actually
performs the hardware actions to reset the platform.
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
The patch adds more debug message in ResetSystem().
It also removes unnecessary check of mResetNotifyDepth.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Add support for platform specific reset filters and platform
specific reset handlers to ResetSystem(). A filter may modify
the reset type and reset data and call ResetSystem() with the
modified parameters. A handler performs the reset action.
The support for platform specific filters and platform specific
handlers is based on the Reset Notification feature added to the
UEFI 2.7 Specification.
Platform specific reset filters are processed first so the final
reset type and reset data can be determined. In the DXE Phase
The UEFI Reset Notifications are processed second so all UEFI
Drivers that have registered for a Reset Notification can perform
any required clean up actions. The platform specific reset
handlers are processed third. If there are no registered
platform specific reset handlers or none of them reset the
platform, then the default reset action based on the
ResetSystemLib is performed.
In the PEI Phase, filters and handlers are registered through
the following 2 PPIs that are based on
EFI_RESET_NOTIFICATION_PROTOCOL.
* gEdkiiPlatformSpecificResetFilterPpiGuid
* gEdkiiPlatformSpecificResetHandlerPpiGuid
In the DXE Phase, filters and handlers are registered through
the following 2 Protocols that are based on
EFI_RESET_NOTIFICATION_PROTOCOL.
* gEdkiiPlatformSpecificResetFilterProtocolGuid
* gEdkiiPlatformSpecificResetHandlerProtocolGuid
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Add the PeiServicesResetSytstem2() function to the PeiServiesLib
to call the ResetSystem2() services in the PEI Services Table.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
As per PI specification v1.6,
As per section 2.1.4.1,
The following file types exist:
Table 3. Defined File Types
Name Value
EFI_FV_FILETYPE_RAW 0x01
EFI_FV_FILETYPE_FREEFORM 0x02
EFI_FV_FILETYPE_SECURITY_CORE 0x03
EFI_FV_FILETYPE_PEI_CORE 0x04
EFI_FV_FILETYPE_DXE_CORE 0x05
EFI_FV_FILETYPE_PEIM 0x06
EFI_FV_FILETYPE_DRIVER 0x07
EFI_FV_FILETYPE_COMBINED_PEIM_DRIVER 0x08
EFI_FV_FILETYPE_APPLICATION 0x09
EFI_FV_FILETYPE_MM 0x0A
EFI_FV_FILETYPE_FIRMWARE_VOLUME_IMAGE 0x0B
EFI_FV_FILETYPE_COMBINED_MM_DXE 0x0C
EFI_FV_FILETYPE_MM_CORE 0x0D
EFI_FV_FILETYPE_MM_STANDALONE 0x0E
EFI_FV_FILETYPE_MM_CORE_STANDALONE 0x0F
The following new section type is added:
EFI_SECTION_MM_DEPEX
This patch adds the management mode FV file type and depex.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Today's McaInitialize() doesn't check State value before initialize
MCi_CTL and MCi_STATUS.
The patch fixes this issue by only initializing the two kinds of
MSRs when State is enabled.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
An ordinary empty directory should contain "." and ".." entries.
When an empty directory even doesn't contain "." or ".." entry,
FileHandleFindFirstFile() may return error status and a NULL
FileInfo.
IsDirectoryEmpty() implementation in Rm.c doesn't consider this
case and the deference of FileInfo->FileName causes page fault
exception because FileInfo is NULL.
The patch checks the return status of FileHandleFindFirstFile()
to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
HDiskImageSetDiskNameOffsetSize() and HFileImageSetFileName()
may be called using the current disk name or file name.
When this happens, today's implementation firstly frees the memory
and then accesses the just-freed memory.
The patch fixes this issue by doing nothing when the disk or file
name is the current one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Fix GCC build failures below.
variable 'EvtTrb' set but not used [-Werror=unused-but-set-variable]
variable 'Index' set but not used [-Werror=unused-but-set-variable]
The build failure could only be caught with -D SOURCE_DEBUG_USE_USB3
build flag.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
"Platform.h" declares the AmdSevInitialize() function without EFIAPI, but
the definition in "AmdSev.c" includes EFIAPI.
GCC toolchains without LTO do not catch this error because "AmdSev.c" does
not include "Platform.h"; i.e. the declaration used by callers such as
"Platform.c" is not actually matched against the function definition at
build time.
With LTO enabled, the mismatch is found -- however, as a warning only, due
to commit f8d0b96629 ("BaseTools GCC5: disable warnings-as-errors for
now", 2016-08-03).
Include the header in the C file (which turns the issue into a hard build
error on all GCC toolchains), plus sync the declaration from the header
file to the C file.
There's been no functional breakage because AmdSevInitialize() takes no
parameters.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: 13b5d743c8
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
"Compress.h" declares the Compress() function as EFIAPI, but the
definition in "Compress.c" lacks EFIAPI.
GCC toolchains without LTO do not catch this error because "Compress.c"
does not include "Compress.h"; i.e. the declaration used by callers such
as "EfiCompress.c" is not actually matched against the function definition
at build time.
With LTO enabled, the mismatch is found -- however, as a warning only, due
to commit f8d0b96629 ("BaseTools GCC5: disable warnings-as-errors for
now", 2016-08-03).
Include the header in the C file (which turns the issue into a hard build
error on all GCC toolchains), plus sync the declaration from the header
file to the C file. Finally, remove EFIAPI from both declaration and
definition -- this was the original intent of commit c4e74e9b81
("ShellPkg/UefiShellDebug1CommandsLib: Remove unnecessary EFIAPI",
2016-10-09), but it missed the header file.
(Gary meant to address that omission in Oct 2017:
[edk2] [PATCH] ShellPkg/UefiShellDebug1CommandsLib: Remove EFIAPI from
Compress()
http://mid.mail-archive.com/20171026065329.32311-1-glin@suse.com
and Ray reviewed the patch, but then the patch was never committed.)
So do the sync and drop EFIAPI now.
This happens to fix the EFICOMPRESS shell command, when built with GCC for
X64.
Cc: Gary Lin <glin@suse.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Fixes: c4e74e9b81
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Case1: Cover the Tool PATH is not exist, eg: build MdeModule under GCC5
toolchain and IPF arch.
Case2: Cover the Tool FLAGS is not exist, eg: build OvmfPkg under
CLANG35 toolchain and X64 arch.
fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=595
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Pointer subtraction is not performed by pointers to elements of the same
array object. Such behavior is undefined by C11 standard and might lead to
potential issues, Refine pointer subtraction by first casting each pointer
to UINTN.
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Today's implementation only assumes SandyBridge CPU supports
Extended On-Demand Clock Modulation Duty Cycle.
Actually it is supported when CPUID.06h.EAX[5] == 1.
When platform requests 50% throttling, it causes value 1000b
set to the low-4 bits of IA32_CLOCK_MODULATION.
But the wrong code sets 1000b to bits[1-3] which causes assertion.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jeff Fan <vanjeff_919@hotmail.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
V3:
a. Remove unused definitions
b. Get records size form the records buffer when getting size action
is triggered.
V2:
Update FirmwarePerformanceSmm to receive the address
of performance records instead of records content.
Receive buffer address of Boot performance records
which are reported by SmmCorePerformanceLib.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V4:
Update the GUID for status code in DxeCorePerformanceLib and
FirmwarePerformanceDxe.
V3:Add handling for the case when performance feature is not enabled.
V2:
Update FirmwarePerformanceDxe to receive the address
of performance records instead of records content.
1. Remove the macro EXTENSION_RECORD_SIZE, since the extension
size can be got through PcdExtFpdtBootRecordPadSize.
2. Hook EFI_SW_DXE_BS_PC_READY_TO_BOOT_EVENT to install ACPI table
3. Copy SMM record accord to the allocated size
4. Receive Boot performance table address instead of
contents which are reported DxeCorePerformanceLib.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V3:
a. Handle the case when string is empty in String Record.
b. Use gEdkiiFpdtExtendedFirmwarePerformanceGuid to report status
code.
c. Refine the code logic.
V2:
Update SmmCorePerformanceLib to report the buffer address of
boot performance records instead of records contents.
Updated to convert Pref entry to FPDT record in SMM phase and then
export records to FPDT table.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V4:
a.Update the GUID for status code in DxeCorePerformanceLib and
FirmwarePerformanceDxe.
b. Add check for Insert FPDT record in DxeCorePerformanceLib
to avoid re-entry case.
V3:
a. Handle the case when string is empty in String Record.
b. refine the code logic.
V2:
Update DxecorePerformanceLib to report the boot performance table
address instead of records contents.
Updated to convert Pref entry to FPDT record in DXE phase and then
allocate boot performance table to save the record and report
the address of boot performance table to FirmwarePerformanceDxe.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V3:Handle the case when string is empty in String Record.
Updated to convert Pref entry to FPDT record in PEI phase and then
report the records to DxeCorePerfLib through GUID hob.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
> v2:
> Reduce the number of page to update/restore from 3 to 2 because DF
> has no effect in this issue.
The infinite loop is caused by the memory instruction, such as
"rep mov", operating on memory block crossing boundary of NON-PRESENT
pages. Because the address triggering page fault set in CR2 will be in
the first page, SmmProfilePFHandler() will only change the first page
into PRESENT. The page following will be still in NON-PRESENT status.
Since SmmProfilePFHandler() will setup single-step trap for the
instruction causing #PF, when the handler returns back to the
instruction and re-execute it, both #DB and #PF will be triggered
because the instruction wants to access both first and second page
but only first page is PRESENT.
Normally #DB exception will be handled first and its handler will
change first page back to NON-PRESENT status. Then #PF is handled
and its handler will change first page to PRESENT status again and
setup another single-step for the instruction triggering #PF. Then
the whole system falls into an infinite loop and the memory operation
will never move on.
This patch fix above situation by always changing 2 pages to PRESENT
status instead of just 1 page. Those 2 pages include the page causing
#PF and the page after it.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The Heap Guard feature wrapped SmmInternalFreePagesEx with
SmmInternalFreePagesExWithGuard but didn't add necessary
parameter check. This patch fixes this situation.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Initialize local variable to suppress warning C4703:
potentially uninitialized local pointer variable.
Both reads (dereferences) of "PciRootBridgeIo" in
PciBusDriverBindingStart() are only reached if
"gFullEnumeration" is TRUE on entry *and* we successfully
open the EfiPciRootBridgeIoProtocol interface.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
When structurePCD only has overall value assigned
in Dsc under different SKU, the value under default sku is used.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
If the PCD is not used in DSC file and user set
that PCD value from Command line, build will fail.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. Check variable offset when merging Hii Pcds
2. Fixed the issue of Hii value inherit with default store.
3. Error handling for incorrect structure pcd declare.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Currently, the FV image size is not enough for the modules after
we enable some flags defined in Nt32Pkg.dsc, e.g:
DEFINE SECURE_BOOT_ENABLE = TRUE
DEFINE TLS_ENABLE = TRUE
DEFINE NETWORK_IP6_ENABLE = TRUE
This patch is to increase the size of FLASH Device to meet the requirement.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Install IOMMU PPI for pre-memory phase and return
EFI_NOT_AVAILABLE_YET to indicate that DMA protection has been enabled,
but DMA buffer are not available to be allocated yet.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Install IOMMU PPI for pre-memory phase and return
EFI_NOT_AVAILABLE_YET to indicate that DMA protection has been enabled,
but DMA buffer are not available to be allocated yet.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Then the consumer of IoMmu PPI has opportunity to get granted DMA
buffer (by callback) to replace old buffer before it is forbidden
by enabling PMR.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
We duplicate the Assembly-Code-File section from build_rule.template
because --convert-hex cannot be used with the MSFT ARM assembler.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Liming Gao <liming.gao@intel.com>
VA_START, VA_END and VA_COPY are the same as the generic macros.
VA_ARG was reverse engineered from MS ARM assembly output.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Introduce CRT assembly replacements for __rt_sdiv, __rt_udiv,
__rt_udiv64, __rt_sdiv64, __rt_srsh (by reusing the RVCT code)
as well as memcpy and memset.
For MSFT compatibility, some of the code needs to be explicitly
forced to ARM, and the /oldit assembly flag needs to be added.
Also, while RVCT_ASM_EXPORT macro invocations have been removed,
the replacement code is designed to be as close as possible to
the one that would have been generated if using the macros.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Most of the RVCT assembly can be reused as is for MSFT except
for CpuBreakpoint.asm, which we need to force to Arm mode.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Liming Gao <liming.gao@intel.com>
We disable the exact same warnings as IA32 and X64.
Also create a dummy macro for PRESERVE8, as this is not supported by
the Microsoft ARM assembler.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When the format of DEVICE_PATH have string, like as:
{DEVICE_PATH("BBS(1,"AB",0)")} have string "AB", will
get the wrong value.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
EBC build failure is caused by d7a09cb86a.
It changes MAX_UINTN and MAX_ADDRESS definition as below. VarCheckUefiLib
and DxeCore uses MAX_UINTN and MAX_ADDRESS in the global data initialization.
New style has >> operator, and not supported by EBC compiler.
The fix is not to build VarCheckUefiLib and DxeCore for EBC arch.
#define MAX_UINTN ((UINTN) ~0)
==>
#define MAX_UINTN ((UINTN)(~0ULL >> (64 - sizeof (INTN) * 8)))
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
EBC build failure is caused by d7a09cb86a.
It changes MAX_UINTN definition as below. AuthVariableLib uses MAX_UINTN
in the global data initialization. New style has >> operator, and not
supported by EBC compiler. The fix is not to build AuthVariableLib for EBC.
#define MAX_UINTN ((UINTN) ~0)
==>
#define MAX_UINTN ((UINTN)(~0ULL >> (64 - sizeof (INTN) * 8)))
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Currently, the GIC driver has a static dependency on the CPU arch protocol
driver, so it can register its IRQ handler at init time. This means there
is a window between dispatch of the CPU driver and dispatch of the GIC
driver where any unexpected GIC state may trigger an interrupt which we
are not set up to handle yet. Note that this is even the case if we enter
UEFI with interrupts disabled at the CPU, given that any TPL manipulation
involving TPL_HIGH_LEVEL will unconditionally enable IRQs at the CPU side
regardless of whether they were enabled to begin with (but only as soon as
the CPU arch protocol is actually installed)
So let's reorder the GIC driver with the CPU driver, and let it run its
initialization that puts the GIC into a known state before enabling
interrupts. Move its installation of its IRQ handler to a protocol notify
callback on the CPU arch protocol so that it runs as soon as it becomes
available.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Delete a bunch of Pcds, a guid, and a related header file - probably Ebl
related.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
HalRuntimeServicesExampleLib contains no .inf and none of its contents
are included elsewhere - so get rid of it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
A bunch of Ebl-related Pcds are still referenced in package
Pcd. Drop them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
gEfiDebugSupportPeriodicCallbackProtocolGuid and
PcdCpuDxeProduceDebugSupport are referred to from CpuDxe.
Delete references from .inf and .h.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Drop a bunch of unused EmbeddedPkg Pcds, including one used
in local code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
ArmVirt.dsc.inc sets gEmbeddedTokenSpaceGuid.PcdCacheEnable,
which is unused and about to be deleted. Drop it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
By default, the device tree compiler emits phandle properties twice:
once called 'phandle' and again called 'linux,phandle'. Given that
Linux was updated in early 2010 [0] to accept the former (which is
what is specified in the ePAPR and device tree specifications), there
is no point in emitting both when compiling device trees for UEFI
platforms.
[0] 04b954a673dd02f585a2769c4945a43880faa989
"of/flattree: Make the kernel accept ePAPR style phandle information"
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The below code reads additional one CHAR16 when copying
content from Specific to NewSpecific.
NewSpecific = AllocateCopyPool(
StrSize(Specific) + sizeof(CHAR16), Specific
);
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Today's implementation of [Ascii]StrnCpyS/[Ascii]StrnCatS calls
StrnLenS () to get the length of source string but supplies the
destination buffer size as max size.
It's a bug that may cause out-of-bound memory access.
For example:
StrnCpyS (Dest[10], 10, "hello", 6)
-> StrnLenS ("hello", 10) //< cause out-of bound memory access
In a pool guard enabled environment, when using shell to edit an
existing file which contains empty line, the page fault is met.
The patch fixes the four library functions to avoid such
out-of-bound memory access.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
When "FOR %a %a IN A B C" is executed,
CurrentScriptFile->CurrentCommand->Data is NULL.
But the code assumes it's not NULL and tries to
deference it.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Add a check for DatumType format, eg: VOID *, original Tool will crash
but no detail error message which cause confusion to user.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
HOST_ARCH has been moved into the common header.makefile
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
With this change, enter single tool directory, make can pass.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
In V2:
1) Update PeiAcpiTimerLib base name to PeiAcpiTimerLib
2) Update PeiAcpiTimerLib to add the missing constructor to enable ACPI IO space
3) Update DxeAcpiTimerLib to cache frequency in constructor.
PeiAcpiTimerLib caches PerformanceCounterFrequency in HOB, then Pei and Dxe
AcpiTimerLib can share the same PerformanceCounterFrequency.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
According to UEFI Spec, EFI_GRAPHICS_OUTPUT_PROTOCOL.Mode->Info->
PixelsPerScanLine may contain padding pixel elements outside the area
covered by HorizontalResolution for performance reasons or due to hardware
restrictions. CorebootPayloadPkg's FbGop driver doesn't follow this
requirement, and produces PixelsPerScanLine simply as
HorizontalResolution. This needs to be fixed to reflect the real length
of a framebuffer scanline.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Current PXE driver uses zero GUID if failed to get the system GUID from smbios
table, and some OS PXE boot may fail in such case. This patch is to add a warning
message to inform user that smbios table is missed on the platform.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Current PXE driver uses zero GUID if failed to get the system GUID from smbios
table, and some OS PXE boot may fail in such case. This patch is to add a warning
message to inform user that smbios table is missed on the platform.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Original VOID* type support L"string" and "string" format, now we also
add support for single quote string that without null terminator.
Type VOID* support L'a' and 'a', the value transfer to c style value.
L'a' --> {0x61, 0x00}
L'ab' --> {0x61, 0x00, 0x62, 0x00}
'a' --> {0x61}
'ab' --> {0x61, 0x62}
when the value is L'' or '' that not include any character, tool will
report error.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
SmiHandlerUnRegister() validates the DispatchHandle by checking
whether the first 32bit matches to a certain signature
(SMI_HANDLER_SIGNATURE).
But if a caller calls *UnRegister() twice and the memory freed by
first call still contains the signature, the second call may hang.
The patch fixes this issue by locating the DispatchHandle
in all SMI handlers, instead of checking the signature.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Refine the debug messages during the verification of microcode to make
them more clear.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Considering following scenario (both NX memory protection and heap guard
are enabled):
1. Allocate 3 pages. The attributes of adjacent memory pages will be
|NOT-PRESENT| present | present | present |NOT-PRESENT|
2. Free the middle page. The attributes of adjacent memory pages should be
|NOT-PRESENT| present |NOT-PRESENT| present |NOT-PRESENT|
But the NX feature will overwrite the attributes of middle page. So it
looks still like below, which is wrong.
|NOT-PRESENT| present | PRESENT | present |NOT-PRESENT|
The solution is checking the first and/or last page of a memory block to be
marked as NX, and skipping them if they are Guard pages.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
If enabled, NX memory protection feature will mark all free memory as
NX (non-executable), including page 0. This will overwrite the attributes
of page 0 if NULL pointer detection feature is also enabled and then
compromise the functionality of it. The solution is skipping the NX
attributes setting to page 0 if NULL pointer detection feature is enabled.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This issue is a regression one caused by a patch at
425d25699b
That fix didn't take the 0 page to free into account, which still
needs to call UnsetGuardPage() even no memory needs to free.
The fix is just moving the calling of UnsetGuardPage() to the place
right after calling AdjustMemoryF().
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Today's implementation only return key state when there is a key.
But when user doesn't press any key, the key state cannot be
returned.
The patch changes the ReadKeyStrokeEx() to always return the
key state even there is no key pressed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Today's implementation only return key state when there is a key.
But when user doesn't press any key, the key state cannot be
returned.
The patch changes the ReadKeyStrokeEx() to always return the
key state even there is no key pressed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Today's implementation only return key state when there is key.
But when user doesn't press any key, the key state cannot be
returned.
The patch changes the ReadKeyStrokeEx() to always return the
key state even there is no key pressed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Today's implementation only return key state when there is key.
But when user doesn't press any key, the key state cannot be
returned.
The patch changes the ReadKeyStrokeEx() to always return the
key state even there is no key pressed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Today's implementation only return key state when there is key.
But when user doesn't press any key, the key state cannot be
returned.
The patch changes the ReadKeyStrokeEx() to always return the
key state even there is no key pressed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
In SafeUintnToChar8(), update its output parameter name.
Update pui8Result --> Result to match its library implementation
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
SMM emulation under both KVM and QEMU (TCG) crashes the guest when the
"jz" branch, added in commit d4d87596c1 ("UefiCpuPkg/PiSmmCpuDxeSmm:
Enable NXE if it's supported", 2018-01-18), is taken.
Rework the propagation of CPUID.80000001H:EDX.NX [bit 20] to IA32_EFER.NXE
[bit 11] so that no code is executed conditionally.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: http://mid.mail-archive.com/d6fff558-6c4f-9ca6-74a7-e7cd9d007276@redhat.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
[lersek@redhat.com: XD -> NX code comment updates from Ray]
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
[lersek@redhat.com: mark QEMU/TCG as well in the commit message]
The SmmStartup() executes in SMM, which is very similar to real mode. Add
"BITS 16" before it and "BITS 32" after it (just before the @32bit label).
Remove the manual 0x66 operand-size override prefixes, for selecting
32-bit operands -- the sizes of our operands trigger NASM to insert the
prefixes automatically in almost every spot. The one place where we have
to add it back manually is the LGDT instruction. (The 0x67 address-size
override prefix is also auto-generated.)
This patch causes NASM to generate byte-identical object code (determined
by disassembling both the pre-patch and post-patch versions, and comparing
the listings), except:
> @@ -158,7 +158,7 @@
> 00000142 6689D3 mov ebx,edx
> 00000145 66B800000000 mov eax,0x0
> 0000014B 0F22D8 mov cr3,eax
> -0000014E 67662E0F0155F6 o32 lgdt [cs:ebp-0xa]
> +0000014E 2E66670F0155F6 o32 lgdt [cs:ebp-0xa]
> 00000155 66B800000000 mov eax,0x0
> 0000015B 0F22E0 mov cr4,eax
> 0000015E 66B9800000C0 mov ecx,0xc0000080
The only difference is the prefix list order, it changes from:
- 0x67, 0x66, 0x2E
to
- 0x2E, 0x66, 0x67
(0x2E is "CS segment override").
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The gSmmCr3, gSmmCr4, gSmmCr0 and gSmmJmpAddr global variables are used
for patching assembly instructions, thus we can't yet remove the DB
encodings for those instructions. At least we should add the intended
meanings in comments.
This patch only changes comments.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
[lersek@redhat.com: adapt commit msg to ongoing PatchAssembly discussion]
Current Pcd value support flexible format, this patch add support for
BPDG Tool to support L'' and '' format.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Spec required for VOID* VPD Pcd, Ascii string use byte alignment, byte
array use 8-byte alignment, unicode string use 2-byte alignment.
while when the VPD pcd offset use *, the offset generated in the .map
file not follow this rule.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
"Entry->Link.ForwardLink = NULL;" is present in RemoveMemoryMapEntry()
for DxeCore, that is correct.
"Entry->Link.ForwardLink = NULL;" is absent in RemoveOldEntry()
for PiSmmCore, that is incorrect.
Without this fix, when FromStack in Entry is TRUE,
the "InsertTailList (&mMapStack[mMapDepth].Link, &Entry->Link);" in
following calling to CoreFreeMemoryMapStack() will fail as the entry
at mMapStack[mMapDepth] actually has been removed from the list.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The Type field of EFI_ACPI_6_2_PPTT_STRUCTURE_PROCESSOR should
be UINT8 as ACPI version 6.2 specification.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <huangming23@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Invoke the newly introduced SD/MMC override protocol to override
the capabilities register after reading it from the device registers,
and to call the pre/post host init and reset hooks at the appropriate
times.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Many ARM based SoCs have integrated SDHCI controllers, and often,
these implementations deviate in subtle ways from the pertinent
specifications. On the one hand, these deviations are quite easy
to work around, but on the other hand, having a collection of SoC
specific workarounds in the generic driver stack is undesirable.
So let's introduce an optional SD/MMC override protocol that we
can invoke at the appropriate moments in the device initialization.
That way, the workaround itself remains platform specific, but we
can still use the generic driver stack on such platforms.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Fetch BytesPerScanLine from coreboot table to reflect how the actual
framebuffer is set up instead of guessing it from the horizontal
resolution.
This fixes a garbled display when HorizontalResolution * (BitsPerPixel
/ 8) and pFbInfo->BytesPerScanLine don't match.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
1. Expose _CRS, _SRS, _PRS control method to support TPM interrupt
2. Provide 2 PCDs to configure _CRS and _PRS returned data
Cc: Yao Jiewen <jiewen.yao@intel.com>
Cc: Ronald Aigner <Ronald.Aigner@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Original code locates the first UnicodeCollation instance in
DXE Core protocol database.
It's not correct considering multiple UnicodeCollation instances
exist in system.
The patch changes logic to find the one that matches the current
system language.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com.
The reason doing this is that we found that calling StartupAllAps() to
flush TLB for all APs in CpuDxe driver after changing page attributes
will spend a lot of time to complete. If there are many page attributes
update requests, the whole system performance will be slowed down
explicitly, including any shell command and UI operation.
The solution is removing the flush operation for AP in CpuDxe driver
and let AP flush TLB after woken up.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The reason doing this is that we found that calling StartupAllAps() to
flush TLB for all APs in CpuDxe driver after changing page attributes
will spend a lot of time to complete. If there are many page attributes
update requests, the whole system performance will be slowed down
explicitly, including any shell command and UI operation.
The solution is removing the flush operation for AP in CpuDxe driver.
Since TLB is always flushed in HLT loop mode, we just need to enforce
a TLB flush for mwait loop mode.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This issue is introduced by a patch at
f32bfe6d06
The above patch miss the case of 64-bit PEI, which will link
X64/MpFuncs.nasm instead of Ia32/MpFuncs.nasm. For X64/MpFuncs.nasm,
ExchangeInfo->ModeHighMemory should be always initialized no matter
if separate wakeup buffer is allocated or not. Ia32/MpFuncs.nasm will
not need ModeHighMemory during AP init. So the changes made in this
patch should not affect the functionality of it.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Commit f9669f09fb ("ArmPlatformPkg: retire obsolete PCDs") got rid of
the unfortunate ARM-specific variant of PcdFirmwareVendor.
However, BeagleBoard was still using it, so the change broke the build.
Fix this by moving BeagleBoard to use the MdeModulePkg one instead.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Every processor's StartupApSignal is initialized in
MpInitLibInitialize() before calling CollectProcessorCount().
When SortApicId() is called from CollectProcessorCount(), AP Index
is re-assigned by APIC ID. But SortApicId() forgets to set the
correct StartupApSignal when sorting the AP.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
The call in ProbeMediaStatusEx() to the ReadDisk() function of the
EFI_DISK_IO_PROTOCOL interface implemented in DiskIoDxe/DiskIo.c
crashed in DiskIo2ReadWriteDisk() because of the NULL value of
the destination buffer pointer.
Pass the address of a buffer in the stack instead of a NULL
pointer.
The similar fix was applied to ProbeMediaStatus in commit
df473cc1fc
* MdeModulePkg/PartitionDxe: Fix media probe
Somehow ProbeMediaStatusEx() wasn't changed together.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Tested-by: Jian J Wang <jian.j.wang@intel.com>
TotalSize must be multiples of 1024 bytes (1 KBytes) according to SDM.
Also enhance the debug message for DataSize that must be
multiples of DWORDs.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=798
SafeIntLib provides helper functions to prevent integer overflow
during type conversion, addition, subtraction, and multiplication.
Conversion Functions
====================
* Converting from a signed type to an unsigned type of the same
size, or vice-versa.
* Converting to a smaller type that could possibly overflow.
* Converting from a signed type to a larger unsigned type.
Unsigned Addition, Subtraction, Multiplication
===============================================
* Unsigned integer math functions protect from overflow and
underflow (in case of subtraction).
Signed Addition, Subtraction, Multiplication
============================================
* Strongly consider using unsigned numbers.
* Signed numbers are often used where unsigned numbers should
be used. For example file sizes and array indices should always
be unsigned. Subtracting a larger positive signed number from a
smaller positive signed number with SafeInt32Sub() will succeed,
producing a negative number, that then must not be used as an
array index (but can occasionally be used as a pointer index.)
Similarly for adding a larger magnitude negative number to a
smaller magnitude positive number.
* SafeIntLib does not protect you from such errors. It tells you
if your integer operations overflowed, not if you are doing the
right thing with your non-overflowed integers.
* Likewise you can overflow a buffer with a non-overflowed
unsigned index.
Based on content from the following branch/commits:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport21ef3a321cca516b1a6133bab4031a
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The VPD size is incorrect if that VPD is not used in Module.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Feng Bob C <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
If user not set Structure overall value in Dsc,
Structure Pcd value would be incorrect.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. The structure pcd default value should use the default value under sku.
2. Incorrect VpdOffset value for those un-used in module Vpd
3. Add a checkpoint for Structure Pcd Name
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
A pcd is initialized under one SKU but is uninitialized under another SKU.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When giving an invalid URI in Boot URI field within HTTP Boot
configuration page, the AsciiPrint will corrupt the setup screen.
This patch is to resolve the issue.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Karunakar P <karunakarp@amiindia.co.in>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
After HTTP boot successfully in home mode, the HTTP device path will be
updated accordingly. So, the new device path may be appended with a DNS
device path node. When executing home mode boot again, the original HTTP
device path will mismatch with the new updated one, which will cause the
HTTP boot failure. So, we need update the current match algorithm to match
the correct FilePath. Since the DNS device path is an optional, we can skip
it check.
This patch is to fix above issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
To fix an issue in which enabling NX feature will mark the AP wakeup
buffer as non-executable and fail the AP init, the buffer was split
into two part: the lower part in memory within 1MB and the higher part
within allocated executable memory (EfiBootServicesCode). But the
address of higher part memory was stored in lower part memory, which
is actually shared with legacy components and will be overwritten by
LegacyBiosDxe driver if CSM is enabled.
This patch fixes this issue by storing the address of higher part
memory in CpuMpData instead of ExchangeInfo.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In the for-loop condition of original code, the expression
*CurrentCommand != CHAR_NULL
is put before expression
CurrentCommand < SortedCommandList + SortedCommandListSize/sizeof(CHAR16)
When CurrentCommand walks to the end of string buffer, one more character
over the end of string buffer will be read and then stop.
To fix this issue, just move the last expression to the first one. Because
of short-circuit evaludation of and-expression, the following one
*CurrentCommand != CHAR_NULL
will not be evaluated if the expression before it is evaludated as FALSE.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The patch fixes flush cache issue in
CreateSecondLevelPagingEntryTable().
We found some video cards still not work even they have
been added to the exception list.
In CreateSecondLevelPagingEntryTable(), the check
"(BaseAddress >= MemoryLimit)" may be TRUE and "goto Done"
will be executed, then the FlushPageTableMemory operations
at the end of the function will be skipped.
Instead of "goto Done", this patch uses "break" to break
the for loops, then the FlushPageTableMemory operations
at the end of the function could have opportunity to be
executed.
The patch also fixes a miscalculation for Lvl3End.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Within function NvmExpressPassThru():
The data buffer for the below 2 Admin command:
Create I/O Completion Queue command (Opcode 01h)
Create I/O Submission Queue command (Opcode 05h)
are not mapped to the PCI controller specific addresses.
But the current code logic also prevents the below NVM command:
Write (Opcode 01h)
from mapping its data buffer.
Hence, this commit refine the logic to resolve this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
I was getting `HOST_ARCH` set using the linux arch name ("x86_64"), which
is different from the MS one ("X64").
It is not clear anyway we can proceed without valid build variables
(`ARCH_INCLUDE`, `BIN_PATH`, `LIB_PATH`, `SYS_BIN_PATH`, and
`SYS_LIB_PATH`).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chema Gonzalez <chemag@gmail.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Per PI spec, the PciEnumerationComplete protocol installation
should be after PciIo installation.
Today's implementation installs the PciEnumerationComplete
after hardware enumeration is completed, but before PciIo
installation.
The change corrects the spec/implementation gap.
The change also benefits certain implementation that depends on
the PciIo handle in PciEnumerationComplete callback.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The patch is just a code cleanup with no functionality impact.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
MtrrSetMemoryAttributesInMtrrSettings() is a batch-set API.
When setting multiple ranges of memory attributes, the single-set
API (MtrrSetMemoryAttributeInMtrrSettings and MtrrSetMemoryAttribute)
may fail, but batch-set API may succeed.
Add comments to recommend caller to use batch-set API when setting
multiple ranges.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Ming Shao <ming.shao@intel.com>
GetWakeupBuffer() tries to find a below-1M free memory, it checks
whether the memory is allocated already in
CheckOverlapWithAllocatedBuffer(). When there is a memory allocation
hob (base = 0xff_00000000, size = 0x10000000),
CheckOverlapWithAllocateBuffer() truncates the base to 0 which causes
it always returns TRUE so GetWakeupBuffer() fails to find a below-1MB
memory.
The patch fixes this issue by using UINT64 type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Edk2Setup.bat is out of maintain. It is a draft version batch file, and not
implement all features listed in its header file. To avoid the confuse,
drop it from edk2 project, and keep edksetup.bat only.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This patch add DefaultStore section format Check and it use same logic
with SKUID section.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch updated Skuid value to support both integer and hex value.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Previous build tool will display "processing meta-data ..." to let user
know the progress. this Patch add this string back.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Update package version of CryptoPkg to 0.98.
Cc: Ting Ye <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Ting Ye <ting.ye@intel.com>
Ironically, disabling warnings in the OpensslLib library build is
causing breakage when using the CLANG35 toolchain to build for ARM:
error: unknown warning option '-Werror=maybe-uninitialized'; did you mean '-Werror=uninitialized'? [-Werror,-Wunknown-warning-option]
So let's add -Wno-unknown-warning-option to the list of warnings to
ignore when using Clang 3.5, and move the same option from the x86
specific list to the shared list for Clang 3.8.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
UEFI2.7/PI1.6 have been added in MdePkg. Update DEC and DSC version to
reflect those changes in MdePkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
In time() wrapper implementation, the gRT->GetTime() call may be not
available. This patch adds the extra error handling to avoid the
potential dead loop.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When system boots to Shell without CDROM in the USB CDROM drive,
and then user inserts one CDROM with Eltorito file system,
"map -r" cannot show the the new Eltorito file system.
The root cause is when "map" command probes the media change
by calling dummy ReadBlockIo(), UsbMassStorage ReadBlockIo()
contains a bug that ignores the media change status:
UsbBootDetectMedia() ignores the EFI_MEDIA_CHANGED status
returned from UsbBootIsUnitReady(), in consequence, the
BlockIo protocol re-installation logic doesn't run.
By checking the code change history, below commit
SHA-1: 19bc852765
* remove unnecessary retry logic from usb mass storage driver.
adds the code to skip EFI_MEDIA_CHANGED status.
Talking with the original committer Tian Feng, he said the
change was just a code cleanup, not for a special bug fix.
So I revert part of the patch, only keep the change that
removes unnecessary retry logic. It can fix this bug.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
DscDefaultValue from Dsc file has been parsed by ValueExpressionEx
when Dsc file parse, so only DscDefaultValue from FDF file need
ValueExpressionEx parse
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
If features like memory profile, protection and heap guard are enabled,
a lot of more memory page attributes update actions will happen than
usual. An unnecessary sync of CR0.WP setting among APs will then cause
worse performance in memory allocation action. Removing the calling of
SyncMemoryPageAttributesAp() in function DisableReadOnlyPageWriteProtect
and EnableReadOnlyPageWriteProtect can fix this problem. In DEBUG build
case, the boot performance can be boosted from 11 minute to 6 minute.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
This hole will cause page fault randomly. The root cause is that Guard
page, which is just freed back to page pool but not yet cleared not-
present attribute, will be allocated right away by internal function
CoreFreeMemoryMapStack(). The solution to this issue is to clear the
not-present attribute for freed Guard page before doing any free
operation, instead of after those operation.
The reason we didn't do this before is due to the fact that manipulating
page attributes might cause memory allocation action which would cause a
dead lock inside a memory allocation/free operation. So we always set or
unset Guard page outside the memory lock. After a thorough analysis, we
believe clearing a Guard page will not cause memory allocation because
memory we're to manipulate was already manipulated before for sure.
Therefore there should be no memory allocation occurring in this
situation.
Since we cleared Guard page not-present attribute before freeing instead
of after freeing, the debug code to clear freed memory can now be restored
to its original way (aka no checking and bypassing Guard page).
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Section data alignment should be made in the build generation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Section data alignment should be made in the build generation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Section data alignment should be made in the build generation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
If PcdDxeNxMemoryProtectionPolicy is set to enable protection for memory
of EfiReservedMemoryType, the BIOS will hang at a page fault exception
triggered by BootScriptExecutorDxe.
The root cause is that this driver will allocate memory of
EfiReservedMemoryType and relocate itself into this new memory. Since
EfiReservedMemoryType of memory is marked non-executable, re-start this
driver after relocation will cause exception. The fix is removing the NX
attribute after memory allocation.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
If PcdDxeNxMemoryProtectionPolicy is set to enable protection for memory
of EfiReservedMemoryType, the BIOS will hang at a page fault exception
during starting SMM driver.
The root cause is that SMM RAM is type of EfiReservedMemoryType and
marked as non-executable. The fix is simply removing NX attribute for
those memory.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
If PcdDxeNxMemoryProtectionPolicy is set to enable protection for memory
of EfiBootServicesCode, EfiConventionalMemory, the BIOS will hang at a page
fault exception triggered by PiSmmCpuDxeSmm.
The root cause is that PiSmmCpuDxeSmm will access default SMM RAM starting
at 0x30000 which is marked as non-executable, but NX feature was not
enabled during SMM initialization. Accessing memory which has invalid
attributes set will cause page fault exception. This patch fixes it by
checking NX capability in cpuid and enable NXE in EFER MSR if it's
available.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
If PcdDxeNxMemoryProtectionPolicy is set to enable protection for memory
of EfiBootServicesCode, EfiConventionalMemory and EfiReservedMemoryType,
the BIOS will hang at a page fault exception randomly.
The root cause is that the memory allocation for driver images (actually
a memory type conversion from free memory, type of EfiConventionalMemory,
to code memory, type of EfiBootServicesCode/EfiRuntimeServicesCode)
will get memory with NX set, because the CpuDxe driver will keep the NX
attribute (with free memory) in page directory during page table splitting
and then override the NX attribute of all its entries.
This patch fixes this issue by not inheriting NX attribute when turning
a page entry into a page directory during page granularity split.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
If PcdDxeNxMemoryProtectionPolicy is set to enable protection for memory
of EfiBootServicesData, EfiConventionalMemory, the BIOS will reset after
timer initialized and started.
The root cause is that the memory used to hold the exception and interrupt
handler is allocated with type of EfiBootServicesData and marked as
non-executable due to NX feature enabled. This patch fixes it by allocating
EfiBootServicesCode type of memory for those handlers instead.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
If PcdDxeNxMemoryProtectionPolicy is set to enable protection for memory
of EfiBootServicesCode, EfiConventionalMemory, the BIOS will hang at a page
fault exception during MP initialization.
The root cause is that the AP wake up buffer, which is below 1MB and used
to hold both AP init code and data, is type of EfiConventionalMemory (not
really allocated because of potential conflict with legacy code), and is
marked as non-executable. During the transition from real address mode
to long mode, the AP init code has to enable paging which will then cause
itself a page fault exception because it's just running in non-executable
memory.
The solution is splitting AP wake up buffer into two part: lower part is
still below 1MB and shared with legacy system, higher part is really
allocated memory of BootServicesCode type. The init code in the memory
below 1MB will not enable paging but just switch to protected mode and
jump to higher memory, in which the init code will enable paging and
switch to long mode.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
In 32-bit mode, the BIOS will not create page table for memory beyond
4GB and therefore it cannot handle the attributes change request for
those memory. But current CpuDxe doesn't check this situation and still
try to complete the request, which will cause attributes of incorrect
memory address to be changed due to type cast from 64-bit to 32-bit.
This patch fixes this issue by checking the end address of input
memory block and returning EFI_UNSUPPORTED if it's out of range.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
We also got maybe-uninitialized warning when building OpensslLib.inf
with GCC48 for ARM and AARCH64, so add -Wno-error=maybe-uninitialized
build option just as other platforms.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Cc: Qin Long <qin.long@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Qin Long <qin.long@intel.com>
XCODE5 doesn't support absolute addressing in the assembly code.
This change uses lea instruction to get the address.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
A submodule allows to keep another Git repository in a subdirectory
of main repository. The submodule repository has its own history, which
does not interfere with the history of the current repository. This can
be used to have external dependencies such as third party libraries.
After the extra patch for EDKII-OpenSSL build was removed, OpenSSL can
be one typical submodule use case in EDKII project. This patch adds the
openssl git repository into EDKII project as one submodule.
One .gitmodules file will be generated with the submodule info:
[submodule "CryptoPkg/Library/OpensslLib/openssl"]
path = CryptoPkg/Library/OpensslLib/openssl
url = https://github.com/openssl/openssl
The user can use the following command to clone both main EDKII repo and
openssl submodule:
1) Add the "--recursive" flag to their git clone command:
$ git clone --recursive https://github.com/tianocore/edk2
or 2) Manually initialize and the submodules after the clone operation:
$ git clone https://github.com/tianocore/edk2
$ git submodule update -–init -–recursive
For Pull operations, "git pull" will not update the submodule repository.
So the following combined commands can be used to pull the remote submodule
updates (e.g. Updating to new supported OpenSSL release)
$ git pull –-recurse-submodules && \
git submodule update -–recursive --remote
Cc: Ye Ting <ting.ye@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Fix DMA does not work issue when system memory is not
greater than 4G.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Commits a2ea6894e6
* UefiCpuPkg/MpInitLib: Fix a bug that AP enters timer INT handler
masked the interrupts in AP.
But it didn't unmask the interrupt in new BSP when Switch BSP
happens.
The patch fixed this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Cc: Eric Dong <eric.dong@intel.com>
Get high top by host address width instead of resource HOB.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
mVtdHostAddressWidthMask is not been used at all,
its definition and related code could be removed.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
According to VTd spec, HostAddressWidth + 1 should be used as the real
host address width value.
Host Address Width:
This field indicates the maximum DMA physical
addressability supported by this platform. The
system address map reported by the BIOS
indicates what portions of this addresses are
populated.
The Host Address Width (HAW) of the platform is
computed as (N+1), where N is the value
reported in this field. For example, for a platform
supporting 40 bits of physical addressability, the
value of 100111b is reported in this field.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
According to VTd spec, the real hardware decoded limit should be
PHMR/PLMR.Limit value + alignment value.
"Bits N:0 of the limit register are
decoded by hardware as all 1s."
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
* In DxeIpIo, an ASSERT check is incorrectly used in IpIoAddIp(), which result
debug image hang when this API is called, this patch is to fix this issue.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Ovmf appended option -mno-mmx -mno-sse, but these two options were enabled
in Openssl. The compiler option becomes -mmmx ?msse -mno-mmx -mno-sse. It
trig mac clang compiler hang when compile one source file in openssl.
This issue is found when SECURE_BOOT_ENABLE is TRUE. This may be the compiler
issue. To work around it, don't add these two options for XCODE5 tool chain.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=849
In V2, use "mov rax, strict qword 0" to replace the hard code db.
1. Use lea instruction to get the address instead of mov instruction.
2. Use the dummy address as jmp destination, and add the logic to fix up
the address to the absolute address at boot time.
3. On MpFuncs.nasm, use ExchangeInfo to record InitializeFloatingPointUnits.
This way is same to MpInitLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
XCODE5 doesn't support absolute addressing in the assembly code.
This change uses lea instruction to get the address.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The Graphics Output Protocol's mode information specifies the
PixelsPerScanLine property. Most of the time this is identical to
HorizontalResolution. However, due to alignment requirements etc. it
may be slightly larger. I.e. each scan line will have some "pixels"
that are not visible on the screen but consume space in the frame
buffer.
If the graphics output protocol correctly initializes
HorizontalResolution to 1366 and PixelsPerScanLine to 1376. As a
result the graphics output is broken.
If setting HorizontalResolution to 1376 instead, the output is fine
(except for 10 invisible pixels on the right of the screen).
The patch fixes this bug by using PixelsPerScanLine when calculating
the line width.
Contributed-under: TianoCore Contribution Agreement 1.1
Reported-by: Christian Ehrhardt <ehrhardt@genua.de>
Signed-off-by: Christian Ehrhardt <ehrhardt@genua.de>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Christian Ehrhardt <ehrhardt@genua.de>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Tested-by: Christian Ehrhardt <ehrhardt@genua.de>
* In DxeIpIo, there are several places use ASSERT() to check input
parameters without and descriptions or error handling. This patch
fixed this issue.
* Fixed some incorrect descriptions in code commence.
* Remove unneeded Exit tag in function IpIoOpen and IpIoConfigIp.
* Add EFIAPI tag for function IpIoRefreshNeighbor.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
* When the packet is not normal packet or icmp error packet, the code
does not recycle it by signal RecycleSignal event, and this will
result some memory leak. This patch is to fix this issue.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
It didn't cause big issues when VT-d was disabled.
But in VT-d enabled platform, lack of EhcFreeUrb call caused
the DMA data was not moved back to user's buffer.
It caused the correct data cannot be got through sync interrupt
transfer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The implementation of MdeModulePkg\Universal\Acpi\AcpiTableDxe reserves
first entry of RSDT/XSDT to FADT, the first entry value is 0 when FADT
is not installed. So the RSDT/XSDT parsing code should check the entry
value first before checking the table signature.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Commit 2ac1730bf2 (MdeModulePkg/DxeIpl: Mark page table as read-only)
sets the memory pages used for page table as read-only after paging is
setup and sets CR0.WP to protect CPU modifying the read-only pages.
The commit causes #PF when MemEncryptSevClearPageEncMask() or
MemEncryptSevSetPageEncMask() tries to change the page-table attributes.
This patch takes the similar approach as Commit 147fd35c3e
(UefiCpuPkg/CpuDxe: Enable protection for newly added page table).
When page table protection is enabled, we disable it temporarily before
changing the page table attributes.
This patch makes use of the same approach as Commit 2ac1730bf2
(MdeModulePkg/DxeIpl: Mark page table as read-only)) for allocating
page table memory from reserved memory pool, which helps to reduce a
potential "split" operation.
The patch duplicates code from commit 147fd35c3e. The code duplication
will be removed after we implement page table manipulation library. See
bugzilla https://bugzilla.tianocore.org/show_bug.cgi?id=847.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
We're currently building everything except for this file.
Since 'fdt_create_empty_tree' can be useful for some
platforms, compile this one too.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This currently isn't needed by anything in the edk2 tree but
it's useful for externally maintained platforms which have
to set this register e.g. to disable alignment aborts.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Today's implementation prints nothing when the format string cannot
fit in the report status extended data buffer.
It confuses user.
The patch changes to print partial message by truncating the format
string when it's too long.
The missing enhancement is the extended data buffer only reserves 96
bytes for the var-args. When the format string is not very long but
contains 13 %lx or %p, the var-args buffer is too small. Today's
implementation prints nothing for this case.
This patch doesn't change such behavior.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
According to UEFI spec, the PXE.Mtftp() should return invalid parameter if the
BufferPtr parameter was NULL and the DontUseBuffer parameter was FALSE.
The DontUseBuffer is only used when perform MTFTP/TFTP read operation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
According to TCG PP1.3 spec, error PCR bank allocation input should be
rejected by Physical Presence. Firmware has to ensure that at least one
PCR banks is active.
Cc: Long Qin <qin.long@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Type definition in UEFI & OpeenSSL is different. Sometime it could cause
write overflow. Should use same data type when accessing the same region
Cc: Long Qin <qin.long@intel.com>
Cc: Chen Chen <chen.a.chen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
AllocateCodePages() is used to allocate buffer for IDT range,
the code pages will be set to RO in SetMemMapAttributes(),
then the code to set IDT range to RO in PatchGdtIdtMap() is
redundant and could be removed.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
When StackGuard is enabled on IA32, the #double fault exception
is reported instead of #page fault.
This issue does not exist on X64, or IA32 without StackGuard.
The fix at e4435f710c was incomplete.
It is because AllocateCodePages() is used to allocate buffer for
GDT and TSS, the code pages will be set to RO in SetMemMapAttributes().
But IA32 Stack Guard need use task switch to switch stack that need
write GDT and TSS, so AllocateCodePages() could not be used.
This patch uses AllocatePages() instead of AllocateCodePages() to
allocate buffer for GDT and TSS if StackGuard is enabled on IA32.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
* Since wireless network can switch at very short time, the time interval
of reconfig event checking is too long for this case. To achieve better
performance and scalability, separate this task from Ip4 tick timer.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
* The library API use array elements without any index range check, this
patch is to fix this issue to avoid null pointer reference.
V2
* Added an ASSERT check for the case PrefixLength equals to IP6_PREFIX_MAX.
* Synced some code descriptions to head file.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
In UDP6Dxe, there are several places that may be enhanced
to check input parameters and returned status. This patch
is to fix these issues.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
In UDP6Dxe Udp6Groups(), the code return directly without free the
buffer allocated for McastIp when JoinFlag is TRUE. It is a memory
leak issue that needs to be fixed. This patch is to fix this issue.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
In Udp6Dxe, there are several places use ASSERT to check returned
value. But these errors should be handled if they occur, this patch
is to fix this issue.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
0 40 f0 100
+---WT--+--UC--+--WT--+-----WB----+----UC----+
When calculating the shortest path from 0 to 100, the
MtrrLibCalculateLeastMtrrs() is called to update the
Vertices.Previous.
When calculating the shortest path from 0 to 40,
MtrrLibCalculateLeastMtrrs() is called recursively to update the
Vertices.Previous.
The second call corrupt the Previous value that will be used
later.
The patch removes the code that corrupts Previous.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
80 A8 B0 B8 C0
+----------WB--------+-UC-+-WT-+-WB-+
For above memory settings, current code caused the final MTRR
settings miss [A8, B0, UC] when default memory type is UC.
The root cause is the code only checks the mandatory weight
between A8 to B0, but skips to check the optional weight.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
* When build a DHCP message in function DhcpSendMessage() or DhcpRetransmit(),
a new NET_BUF is created by the library of NetbufFromExt, but it's not freed
after it is sent out. This patch is to fix this memory leak issue.
V2:
* Since packet has already been referred by DhcpSb->LastPacket, and will be
freed when sending another packet or clean up, there is no need to add an
extra free function in NetbufFromExt.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
In some case the ArrayIndex with UINT16 may be not large enough to
hold the multiplication result of HiiQuestion->VarOffset * 8;
So this patch update the data type to fix this potential issue.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When compiling with any ARM toolchain and Os, registers can get
trashed when returning for the second time from SetJump because GCC
only handles this correctly when using standard names like 'setjmp' or
'getcontext'. When different names are used you have to use the
attribute 'returns_twice' to tell gcc to be extra careful.
example:
extern int FN_NAME(void*);
void jmp_buf_set(void *jmpb, void (*f)(void))
{
if (!FN_NAME(jmpb))
f();
}
this code produces this wrong code with Os:
00000000 <jmp_buf_set>:
0: e92d4010 push {r4, lr}
4: e1a04001 mov r4, r1
8: ebfffffe bl 0 <nonstandard_setjmp>
c: e3500000 cmp r0, #0
10: 01a03004 moveq r3, r4
14: 08bd4010 popeq {r4, lr}
18: 012fff13 bxeq r3
1c: e8bd4010 pop {r4, lr}
20: e12fff1e bx lr
The generated code pushes backups of r4 and lr to the stack and then
saves all registers using nonstandard_setjmp.
Then it pops the stack and jumps to the function in r3 which is the
main problem because now the function can overwrite our register
backups on the stack.
When we return a second time from the call to nonstandard_setjmp, the
stack pointer has it's original(pushed) position and when the code
pops r4 and lr from the stack the values are not guaranteed to be the
same.
When using a standard name like setjmp or getcontext or adding
'__attribute__((returns_twice))' to nonstandard_setjmp's declaration
the code looks different:
00000000 <jmp_buf_set>:
0: e92d4007 push {r0, r1, r2, lr}
4: e58d1004 str r1, [sp, #4]
8: ebfffffe bl 0 <setjmp>
c: e3500000 cmp r0, #0
10: 059d3004 ldreq r3, [sp, #4]
14: 01a0e00f moveq lr, pc
18: 012fff13 bxeq r3
1c: e28dd00c add sp, sp, #12
20: e49de004 pop {lr} ; (ldr lr, [sp], #4)
24: e12fff1e bx lr
Here the problem is being solved by restoring r3 from the stack
without popping it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
EBC compiler doesn't treat EFI_xxx as constant due to these macros
are UINT64 type in 64bit env and UINT32 type in 32bit env.
So it reports error when "case EFI_xxx" is used.
The patch changes to use if-else to fix EBC build failure.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The patch only change the comments and variable name so
doesn't impact the functionality.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
*SetMemoryAttribute*() API cannot handle the setting request that
looks like <0, MAX_ADDRESS, Type>. The buggy parameter checking
logic returns Unsupported for this case.
The patch fixes the checking logic to handle such case.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Code forgot to initialize the optional weight between adjacent
vertices. It caused wrong MTRR result was calculated for some
memory settings.
The logic was incorrectly removed when converting from POC
code. The patch adds back the initialization.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
MtrrSetMemoryAttributesInMtrrSettings() missed the debug messages
of memory attribute request and status. The patch moves all debug
messages from MtrrSetMemoryAttributeInMtrrSettings() to
MtrrSetMemoryAttributesInMtrrSettings() and refines the debug message
to carry more information.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
v2:
* Refine the commit log.
There are two place to close the ISCSI ExitBootServiceEvent:
#1.IScsiOnExitBootService(), which is the callback function of
ExitBootServiceEvent.
#2.IScsiCleanDriverData(), which will be invoked by ISCSI driver
binding stop().
So, the ExitBootServiceEvent will be closed and freed when exit boot
server is triggered. But it may be closed and freed again in ISCSI driver
binding stop(), which will result in the issue recorded at
https://bugzilla.tianocore.org/show_bug.cgi?id=742.
This patch is to resolve the issue.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
v2:
* Refine the commit log.
There are two place to close the ISCSI ExitBootServiceEvent:
#1.IScsiOnExitBootService(), which is the callback function of
ExitBootServiceEvent.
#2.IScsiCleanDriverData(), which will be invoked by ISCSI driver
binding stop().
So, the ExitBootServiceEvent will be closed and freed when exit boot
server is triggered. But it may be closed and freed again in ISCSI driver
binding stop(), which will result in the issue recorded at
https://bugzilla.tianocore.org/show_bug.cgi?id=742.
This patch is to resolve the issue.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
This patch is to fix the compiler warning error: C4245. The issue will happen
if the below build option is enabled:
*_*_*_CC_FLAGS = -J.
That's because the value of ('A' - 'a') is a negative value, which will
be converted to an unsigned type if CHAR8 is treated as unsigned:
Src -= ('A' - 'a');
The above issue is also recorded at:
https://bugzilla.tianocore.org/show_bug.cgi?id=815.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
* In function Mtftp4WrqSendBlock(), when packet is not needed, function
returns EFI_ABORTED but not freed the packet buffer. It results some
memory leak and this patch is to fix this issue.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
* This function sets returned status as token status and signal token
when error occurs, and it results token status not compliance with
spec definition. This patch fixed this issue.
* This function restore Tpl twice when Mtftp4WrqStart() returns an
error, this patch fixed this issue.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
The reason is that DXE part initialization will reuse the stack allocated
at PEI phase, if MP was initialized before. Some code added to check this
situation and use stack base address saved in HOB passed from PEI.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
As the name suggests, CpuMpData->CpuInfoInHob[0].ApTopOfStack must be init
to the top of stack. But the MpInitLibInitialize() passed the base address
of stack to InitializeApData(), which is not correct. Although this stack
is not used for BSP, it's should be fixed in case of misunderstanding and
future possible code changes.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The version cc71d8's fix was washed out by structure pcd report patch.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
when it is only single SKUID, we don't need to print the SKUID info for
every PCD since in the Global section there already have this info.
For DefaultStore, we use same rule.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When SourceLevelDebug is enabled, AP randomly executes the DXECORE
timer handler logic. The root cause is the interrupts are not
masked in AP wake up procedure.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
PCI_ECAM_ADDRESS() macro is defined in PciExpress21.h so
always include PciExpress21.h in the library header file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
* Added some ASSERT descriptions for library APIs.
* Added "Optional" option for Context parameter in UdpIoCancelDgrams().
* Added function return status check for UdpIoFreeIo().
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
UefiShellLevel2CommandsLib (somewhat questionably) calls the
BaseLib-internal function InternalCharToUpper().
This function is declared in "MdePkg/Library/BaseLib/BaseLibInternals.h",
which is not a public library class header. UefiShellLevel2CommandsLib
therefore duplicates the function declaration, but a mistake was made: the
EFIAPI calling convention is not spelled out on the duplicated
declaration. Therefore calls made from UefiShellLevel2CommandsLib will not
match the actual function definition in "MdePkg/Library/BaseLib/String.c",
when GCC/X64 toolchains are used.
One consequence of this is that cross-filesystem copies don't work in the
UEFI shell (see the StrniCmp() function in
"UefiShellLevel2CommandsLib.c"). From the original report:
> FS0:\efi\ubuntu\> cp grubx64.efi fs1:\
>
> cp: The source and destination are the same.
Copy the declaration from "BaseLibInternals.h" to
"UefiShellLevel2CommandsLib.c" verbatim.
Reported-by: Rebecca Cran <rebecca@bluestop.org>
Analyzed-by: Thomas Palmer <thomas.palmer@hpe.com>
Analyzed-by: Liming Gao <liming.gao@intel.com>
Ref: http://mid.mail-archive.com/47cd17d8-f022-6ca5-2f52-06a8250f8d14@cran.org.uk
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Rebecca Cran <rebecca@bluestop.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Thomas Palmer <thomas.palmer@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The final Pcd value should only be override by its parents.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Feng Bob C <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Pcd default value in DEC should only be assigned once.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
DynamicHiiPcd may be used by PEIM or DXE driver.
All used DynamicHiiPcd value should be collected and placed into
the default setting PCD PcdNvStoreDefaultValueBuffer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Support early SetAttributes() before DMAR table is installed.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signal AcpiNotificationFunc() initially for the case that
DMAR table has been installed when creating event.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
* In old implementation, the operation len-- assumes AsciiSPrint()
has counted NULL terminator, and it's not correct. This patch is
to fix this issue.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
* Library API should check the input parameters before use, or
ASSERT to tell it has to meet some requirements. But in DxeNetLib,
not all functions follows this rule.
* ASSERT shouldn't be used as error handling, add some handling code
for errors.
* Add some ASSERT commence in function notes.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
The NIC_ITEM_CONFIG_SIZE macro in DxeNetLib is defined as:
sizeof (NIC_IP4_CONFIG_INFO) + sizeof (EFI_IP4_ROUTE_TABLE) *
MAX_IP4_CONFIG_IN_VARIABLE. This macro should be surrounded
with parenthesis to avoid being incorrectly used.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
This patch is to fix the issue that dereferencing of "This" (EFI_LOAD_FILE_PROTOCOL)
in EfiPxeLoadFile() is happening before the NULL check.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
The PxeBcDhcp4CallBack() is provided for DHCP driver to invoke packet check
during DHCP process, the DHCP driver should make sure Packet and NewPacket
has meaningful value. This patch adds assert for this.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
PXE need to use extended DHCP options and check received offers in callback
function, so there is no need to continue the PXE process if DHCP driver has
been started by other instance but not PXE driver itself.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
VS2010 also defined RSIZE_MAX, so we undef it first.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Currently "BaseTools/Source/C/DevicePath/DevicePath.c" fails to build with
GCC48:
> DevicePath.c: In function 'print_mem':
> DevicePath.c:109:5: error: 'for' loop initial declarations are only
> allowed in C99 mode
> for (size_t i=0; i<n; i++) {
> ^
> DevicePath.c:109:5: note: use option -std=c99 or -std=gnu99 to compile
> your code
In addition, the print_mem() function does not conform to the edk2 coding
style:
- we use CamelCase and no underscores in identifiers,
- the types and type qualifiers should follow the edk2 style,
- initialization as part of definition is forbidden for local variables.
Clean these up.
While updating the print_mem()/PrintMem() call sites, also remove the
superfluous parentheses around the second argument.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Fixes: 7dbc50bd24
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
UINT64 is defined as the different type for the different ARCHs. To
let it work for all archs and compilers, add (unsigned long long) for
the input value together with %llx.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
The Dhcp4.TransmitReceive() API should be able to use at any time according
to UEFI spec. While in classless addressing network, the netmask must be
explicitly provided together with the station address.
But if the DHCP instance haven't be configured with a valid netmask, we need
compute it according to the classful addressing rule. In such case, if the
user configures with class E IP address, ASSERT will happen, we need to handle
this case and return error status code.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
in version a74398 we use guid value and Fv name as ffs dir for FILE
statement, this patch apply this rule on subFv image.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
clang generates many warnings
warning: field 'XXX' is uninitialized when used here [-Wuninitialized]
for VfrFormPkg.h.
VfrFormPkg.h defines many classes derived from CIfrObj (along with other
base classes.)
Each of these derived classes defines a non-static member field that serves
as a duplicate pointer to an original pointer defined in the CIfrObj base
class, but cast to a different pointer type.
The derived class constructor passes the duplicate pointer to base class
constructors:
1) Once passes the address of the duplicate pointer to the CIfrObj
constructor to have it initialized.
2) Then passes the duplicate pointer to one or more subsequent base class
constructors to be used.
Both 1) and 2) constitute undefined behavior in C++. C++ prescribes that
base classes are initialized before non-static members when initializing a
derived class. So when base class constructors are executing, it is not
permitted to assume any non-static members of the derived class exist (even
to the stage of having their storage allocated.)
clang does not issue warnings for 1), but issues warnings -Wuninitialized
for 2).
This coding methodology is resolved as follows:
a) The CIfrObj object accessor method for retrieving the original pointer
is revised to a template member function that returns the original
pointer cast to a desired target type.
b) The call to CIfrObj constructor is no longer used to initialize the
duplicate pointer in the derived class.
c) Any subsequent calls to a base class constructor that need to use the
pointer, retrieve it from the CIfrObj base class using the template
accessor method.
d) If the derived class makes no further use of the pointer, then the
duplicate pointer defined in it is eliminated.
e) If the derived class needs the duplicate pointer for other use, the
duplicate pointer remains in the derived class and is initialized in
proper order from the original pointer in CIfrObj.
f) Existing source code that previously used the CIfrObj pointer accessor
method is revised to use the template method.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zenith432 <zenith432@users.sourceforge.net>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Some code generated by antlr causes clang to emit warning
warning: equality comparison with extraneous parentheses
[-Wparentheses-equality]
The warning is suppressed specifically for clang without affecting other
compilers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zenith432 <zenith432@users.sourceforge.net>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The member function CVfrDLGLexer::errstd is intended as an override virtual
function of DLGLexerBase::errstd, but due to mismatched prototype, it
didn't override, and never got called.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zenith432 <zenith432@users.sourceforge.net>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This is caused by a previous patch which tried to fix string over-read.
It's found that that patch for PrintLib in MdePkg will cause premature
terminating of loop used to traversing format string and cause incomplete
string output. Because this library uses similar code to do the same
job, it has the same issue too. So the fix is also the same.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This is caused by previous patch which tried to fix string over-read,
which breaks UEFI menu rendering: the following
/------------------------------------------------------------------------------\
| Device Manager |
\------------------------------------------------------------------------------/
is rendered as
/\
| Device Manager |
\/.0 2.00 GHz
(the spurious digits are SMBIOS data from the home screen)
The problem appears to be that the CHAR16 value of BOXDRAW_HORIZONTAL
equals 0x2500, which means that testing ArgumentString[] != '\0'
(which tests the low byte only) will yield FALSE and terminate the
loop prematurely.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
According to UEFI/PI spec, the AllocateXXXPool() interfaces should
return eight-byte aligned buffer that satisfies the required
HEADER_ALIGNMENT which is 4.
This patch adds ASSERT to make sure the bin at required alignment,
that can help catch the issue earlier about incorrect aligned buffer
returned from AllocateXXXPool().
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
According to UEFI/PI spec, the AllocateXXXPool() interfaces should
return eight-byte aligned buffer that satisfies the required
HEADER_ALIGNMENT which is 4.
This patch adds ASSERT to make sure the bin at required alignment,
that can help catch the issue earlier about incorrect aligned buffer
returned from AllocateXXXPool().
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Enhance DumpModuleImageInfo() for page fault with I/D set.
If it is page fault with I/D set, the (E/R)IP in SystemContext
could not be used for DumpModuleImageInfo(), instead of, the next
IP of the IP triggering this page fault could be found from stack
by (E/R)SP in SystemContext.
IA32 SDM:
— I/D flag (bit 4).
This flag is 1 if the access causing the page-fault exception was
an instruction fetch. This flag describes the access causing the
page-fault exception, not the access rights specified by paging.
The idea comes from SmiPFHandler () in
UefiCpuPkg/PiSmmCpuDxeSmm/Ia32/PageTbl.c and
UefiCpuPkg/PiSmmCpuDxeSmm/X64/PageTbl.c.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
We meet a case that different FV use same FILE statement Guid, but the
FILE content is different. current we use the Guid value as Ffs file
dir which cause the ffs file will be override. This patch use Guid
value and Fv name as ffs dir for FILE statement.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BfvHeader->FvLength is UINT64. Now, it prints with %x. It will cause the
late FvHandle to be as zero. So, its type is converted to UINT32.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Due to a potential hole in the stop condition of loop, the two continuous
access to ArgumentString (index, index+1) inside the loop might cause the
string ending character ('\0') and the byte after it to be read.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
We recently added -Wno-error=format to the OpenSslLib build script to
work around an issue in the upstream OpenSSL code. This does not inhibit
the warning, but prevents it from breaking the build by not treating it
as a fatal error.
Unfortunately, this interacts poorly with the -Wno-unused-const-variable
option that we added to GCC49 and later. Those versions of GCC ignore
-Wno-xxxx options that they don't understand, unless warnings are emitted
for another reason, in which case the warning is emitted after all, and
in our case, this breaks the build when the non-fatal format warning is
emitted.
CryptoPkg/Library/OpensslLib/openssl/crypto/asn1/x_int64.c: In function 'uint64_print':
CryptoPkg/Library/OpensslLib/openssl/crypto/asn1/x_int64.c:105:32: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'int64_t {aka long long int}' [-Wformat=]
return BIO_printf(out, "%"BIO_PRI64"d\n", **(int64_t **)pval);
^
CryptoPkg/Library/OpensslLib/openssl/crypto/asn1/x_int64.c:106:28: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'uint64_t {aka long long unsigned int}' [-Wformat=]
return BIO_printf(out, "%"BIO_PRI64"u\n", **(uint64_t **)pval);
^
CryptoPkg/Library/OpensslLib/openssl/crypto/asn1/x_int64.c: At top level:
cc1: error: unrecognized command line option '-Wno-unused-const-variable' [-Werror]
cc1: all warnings being treated as errors
So replace -Wno-error=format with -Wno-format to suppress the warning
entirely.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Long Qin <qin.long@intel.com>
Roll back commit 56649f4301.
The original names follows the spec definition.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
'COMMON' is an alias of 'DEFAULT' for internal code,
it should be removed before generating Pcd DataBase.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
On GCC Build: openssl-1.1.0g introduced one additional build warning:
...\openssl\crypto\asn1\x_int64.c:105:32: error: format '%ld' expects
argument of type 'long int', but argument 3 has type 'int64_t
{aka long long int}' [-Werror=format=]
return BIO_printf(out, "%"BIO_PRI64"d\n", **(int64_t **)pval);
^
Add "-Wno-error=format" to GCC build flags to suppress this warning,
since we have no real printf usage in BaseCryptLib, and BIO_printf()
was already wrapped as a dummy implementation in CryptoPkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Long Qin <qin.long@intel.com>
TCP payload check is implemented by TcpVerifySegment(), but all the function
calls of TcpVerifySegment() are placed in ASSERT(), which is only valid for
debug version:
ASSERT (TcpVerifySegment (Nbuf) != 0);
This patch is to enable the check for release version.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wang Fan <fan.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
With correct model CPU, current checking logic will
always execute AsmReadMsr64 operation and then check
ECX.AESNI[bit 25] = 1. Update checking logic to check
ECX.AESNI[bit 25] = 1 first and then do AsmReadMsr64
operation.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
When CpuCommonFeaturesLib use RegisterCpuFeaturesLib to register
CPU features, the CpuFeaturesData->BitMaskSize has already been
initialized. So delete redundant PcdGetSize PcdCpuFeaturesSupport
in CpuInitDataInitialize.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
This reverts commit 5c59537c10.
Current code already has function IsCpuFeatureSupported to do
the feature validation, not need this check logic anymore.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The DecBuildData.py, DscBuildData.py and InfBuildData.py were separated
from WorkspaceDatabase.py, so we updated to use same copyright year
info.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PerformancePkg contains following components:
1. TscTimerLib
2. Dp_App
3. Header files.
#1 has already been deprecated.
#2 can be removed because DpApp was added to ShellPkg.
#3 Header files are not used by DpApp and
MdeModulePkg/PerformanceLib instances.
In summary, this package is no longer useful.
All related platforms have been updated to remove the references.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Daryl McDaniel <edk2-lists@mc2research.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Update the supported OpenSSL version to the latest 1.1.0g (02-Nov-2017).
The changes includes:
- Re-generate the OpensslLib[crypto].inf using process_files.pl script
to reflect the openssl source changes.
- Update OpenSSL-HOWTO.txt
- On Visual Studio Build: adding "/wd4819" to disable one addition build
warning issue, which was already fixed in OpenSSL-HEAD
https://github.com/openssl/openssl/pull/4691.
- On GCC Build: openssl-1.1.0g introduced one additional build warning:
...\openssl\crypto\asn1\x_int64.c:105:32: error: format '%ld' expects
argument of type 'long int', but argument 3 has type 'int64_t
{aka long long int}' [-Werror=format=]
return BIO_printf(out, "%"BIO_PRI64"d\n", **(int64_t **)pval);
^
Adding "-Wno-error=format" to GCC build flag to suppress this warning,
since we have no real printf usage in BaseCryptLib, and BIO_printf()
was already wrappered as the dummy implementation in CryptoPkg.
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Long Qin <qin.long@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Three issues addressed here:
a. Make NX memory protection and heap guard to be compatible
The solution is to check PcdDxeNxMemoryProtectionPolicy in Heap Guard to
see if the free memory should be set to NX, and set the Guard page to NX
before it's freed back to memory pool. This can solve the issue which NX
setting would be overwritten by Heap Guard feature in certain
configuration.
b. Returned pool address was not 8-byte aligned sometimes
This happened only when BIT7 is not set in PcdHeapGuardPropertyMask. Since
8-byte alignment is UEFI spec required, letting allocated pool adjacent to
tail guard page cannot be guaranteed.
c. NULL address handling due to allocation failure
When allocation failure, normally a NULL will be returned. But Heap Guard
code will still try to adjust the starting address of it, which will cause
a non-NULL pointer returned.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
According the Spec, the FragmentBuffers in FragmentTable are allocated
by the application when calling Receive() function. This patch is to
check whether the FragmentBuffer is valid or not.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wang Fan <fan.wang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Due to coding style fix of the structure definition in BaseLib.h, all
code referencing those structure must be updated accordingly.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=546
BaseTools will generate the optimized PCD database to save the image size
at build time for multiple SKUs. The optimized PCD database layout will be like
below, the PCD database will be composed of the full default SKU data
(PCD_DATABASE_INIT) and the non-default SKU delta data(PCD_DATABASE_SKU_DELTA).
PCD driver will build HOB to store the full default SKU data, and patch HOB
data based on non-default SKU delta data for the SKU set by SetSku(),
it can save memory resource at boot time.
//
// PCD database layout:
// +---------------------------------+
// | PCD_DATABASE_INIT (DEFAULT SKU) |
// +---------------------------------+
// | PCD_DATABASE_SKU_DELTA (SKU A) |
// +---------------------------------+
// | PCD_DATABASE_SKU_DELTA (SKU B) |
// +---------------------------------+
// | ...... |
// +---------------------------------+
//
BaseTools, PCD database and driver updates are needed for this proposal.
For single SKU (default) case, this proposal is expected to have no impact.
For multi-SKU case, PCD database format will be changed.
So, PcdDataBase Version is also updated from 6 to 7.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
PEI may report the normal format variable storage HOB for the default
EFI variable. VariableDxe needs to support it and set them into NV variable
region.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When multiple skus are enabled, PCD database should record the supported SKUs.
This patch fixes PCD database to add the missing supported SKUs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@Intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
If VPD PCD value is same in the different SKUs, the different SKUs will
save the same offset for this PCD in VPD region. That means there is only
one PCD value copy in VPD region to save VPD space.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Feng Bob C <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=706
Add Structure PCD support for Build report. Structure PCD field value described
in DEC/DSC will be display in build report. And, PCD value for each SKU and
Default store will also be shown in build report.
Contributed-under: TianoCore Contribution Agreement 1.1
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=546
BaseTools will generate the optimized PCD database to save the image size
at build time for multiple SKUs. The optimized PCD database layout will be like
below, the PCD database will be composed of the full default SKU data
(PCD_DATABASE_INIT) and the non-default SKU delta data(PCD_DATABASE_SKU_DELTA).
PCD driver will build HOB to store the full default SKU data, and patch HOB
data based on non-default SKU delta data for the SKU set by SetSku(),
it can save memory resource at boot time.
//
// PCD database layout:
// +---------------------------------+
// | PCD_DATABASE_INIT (DEFAULT SKU) |
// +---------------------------------+
// | PCD_DATABASE_SKU_DELTA (SKU A) |
// +---------------------------------+
// | PCD_DATABASE_SKU_DELTA (SKU B) |
// +---------------------------------+
// | ...... |
// +---------------------------------+
//
BaseTools, PCD database and driver updates are needed for this proposal.
For single SKU (default) case, this proposal is expected to have no impact.
For multi-SKU case, PCD database format will be changed.
So, PcdDataBase Version is also updated from 6 to 7.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Feng Bob C <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=661
Collect all DynamicHii and DynamicExHii PCD value into PCD
PcdNvStoreDefaultValueBuffer, then firmware can access this PCD value
to get the variable default setting.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Feng Bob C <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
As a workaround for the static code checkers, enlarge the size of the
string buffer 'AlignmentBuffer' so that it can hold all the digits of an
unsigned 32-bit integer plus the size unit character (e.g. 'M' & 'K').
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add checks to ensure when the destination string buffer is of fixed
size, the strcpy/strcat functions calls will not access beyond the
boundary.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add checks to ensure when the destination string buffer is of fixed
size, the strcpy/strcat functions calls will not access beyond the
boundary.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add checks to ensure when the destination string buffer is of fixed
size, the strcpy/strcat functions calls will not access beyond the
boundary.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add checks to ensure when the destination string buffer is of fixed
size, the strcpy/strcat functions calls will not access beyond the
boundary.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add checks to ensure when the destination string buffer is of fixed
size, the strcpy/strcat functions calls will not access beyond the
boundary.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The commit removes the usages of sprintf() function calls with '%s' in
the format string. And uses strncpy/strncat instead to ensure the
destination string buffers will not be accessed beyond their boundary.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add checks to ensure when the destination string buffer is of fixed
size, the strcpy/strcat functions calls will not access beyond the
boundary.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add an extra NULL check for the file handle to ensure that its status is
correct.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This commit refines the logic for main(). It makes the logic more
straightforward to prevent possible mis-reports by static code
checkers.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In HttpBootCallback(), when data type is HttpBootHttpResponse, function may meet
the resource redirect error. In current implementation, function will still go
ahead to find header for HTTP_HEADER_CONTENT_LENGTH, this is not expected. Function
should break in redirect status error handling.
Cc: Wang Fan <fan.wang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Wang Fan <fan.wang@intel.com>
This patch updates PxeBcIcmpErrorDpcHandle() and PxeBcIcmp6ErrorDpcHandle() to
recycle the ICMP packet after copy it to PXE mode data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
The IP protocol has been configured to only receive ICMP packet in PXE driver.
So this patch removes the unnecessary check for NextHeader field and replace it
with ASSERT.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
This patch updates the constructor of DpcLib to return error if failed to
locate DPC protocol.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
AP has its own stack for code execution. If PcdCpuStackGuard is enabled,
the page at the bottom of stack of AP will be disabled (NOT PRESENT) to
monitor the stack overflow issue. This requires PcdCpuApStackSize to be
set with value more than one page of memory.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This patch fixes a bug in Ip4ConfigProtocol, that new created IP interface is
not freed if Open ARP protocol failed.
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Instance->Dhcp4Event is not necessary to be created in Ip4Config2InitInstance.
Because it will created in Ip4StartAutoConfig() later.
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
This patch updates the DxeIpIoLib to check the input parameters before using.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
This patch updates some API descriptions in DxeIpIoLib to match the real
implementation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
In DxeIpIo, there are several places not check the returned value of called functions.
This patch is to add the error handling to these functions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The first 48 bytes contain the microcode update header.
DataSize must be a multiple of DWORDs.
TotalSize is always a multiple of 1024.
Both size of CPU_MICROCODE_EXTENDED_TABLE_HEADER and
CPU_MICROCODE_EXTENDED_TABLE are multiple of DWORDs.
So (ExtendedTableLength & 0x3)!=0 should be
(ExtendedTableLength & 0x3)==0.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
From what I can see this bug dates back to the commit from 2011 where
support for this was added: 2cf4b60895
The first problem is that PopulateLevel2PageTable overflows the
translation table buffer because it doesn't verify that the size
actually fits within one level 2 page table.
The second problem is that the loop in FillTranslationTable doesn't
care about the PhysicalBase or the RemainLength and always substracts
one section size from RemainLength.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The root cause is that mImagePropertiesPrivateData.CodeSegmentCountMax was
not updated with correct value due to the fact that SortImageRecord() called
before might change the content of current ImageRecord. This will in turn
cause incorrect memory map entries generated in SplitTable().
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Last check in involved a build error, this patch is to
fix this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Since new Api NetLibDetectMediaWaitTimeout was involved to support connecting
state handling, and it is forward compatible. So apply this Api in ShellPkg.
V2:
*Define time period in a macro instead of hard code.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Signed-off-by: fanwang2 <fan.wang@intel.com>
Since new Api NetLibDetectMediaWaitTimeout was involved to support connecting
state handling, and it is forward compatible. So apply this Api in NetworkPkg.
V2:
*Define time period in a macro instead of hard code.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Signed-off-by: fanwang2 <fan.wang@intel.com>
Since new Api NetLibDetectMediaWaitTimeout was involved to support connecting
state handling, and it is forward compatible. So apply this Api in MdeModulePkg.
V2:
*Define time period in a macro instead of hard code.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Signed-off-by: fanwang2 <fan.wang@intel.com>
This patch updates the DxeIpIoLib to return EFI_INVALID_PARAMETER instead of
ASSERT if the input pointers are not correct.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
This patch updates the IP4 driver to use error status code instead of ASSERT
if failed to allocate memory buffer.
Reviewed-by: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Add an entry for ConsolePrefDxe under [Components.common],
to permit building standalone.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The root cause of this issue is that, during splitting page table, the page
size should be the value of next level (smaller one) instead of current level.
The wrong page size will then cause wrong page table introduced, which will
break the normal boot.
Validation works include booting to Windows 10 and Fedora 26 on real Intel
platform and OVMF emulated platform in addition to manual checks on page
table with JTAG tool.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
As some implementation of SMM Child Dispatcher (including SxDispatch)
may deny the handler registration after SmmReadyToLock, using
SxDispatch in SmmReadyToBootHandler() will be too late.
This patch updates code to use SxDispatch in SmmEndOfDxeHandler()
instead of SmmReadyToBootHandler().
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
According the UEFI Spec for PxeBc.SetStationIP():
If NewStationIP is NULL, then the current IP address will not be modified.
...
If NewSubnetMask is NULL, then the current subnet mask will not be modified.
Currently, EfiPxeBcSetStationIP() doesn't comply with UEFI Spec. This patch is
to fix the issue.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
According UEFI Spec:
The PXE Base Code Callback Protocol must be on the same handle as the PXE
Base Code Protocol.
But current implementation doesn't follow that. This patch is fix that issue.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
According UEFI Spec, if valid PXE offer is not received, Pxe.Dhcp()
should return EFI_NO_RESPONSE, but currently, EFI_TIMEOUT is returned
from Pxe.Dhcp().
This patch is to fix the above issue.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
V2:
Update function name, add more detail description.
V1:
Check and assert invalid RegisterCpuFeature function parameter
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This patch enables hash value check for single module build to decide
whether we can skip to build this module.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V2: change to use InfBuildData but not ModuleAutoGen
We meet the case that first build with --hash option, then build it
again with --hash and --binary-destination option, since the hash value
is same, tool will not build the driver again, it cause the binary
files are not backed up.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
We don't need cache the .efi file location into build option, otherwise
when we change the --binary-destination location, it would cause the
hash value is different.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The incorrect indent introduced by 37de70, it cause PEIM in sub FV
image can't be rebased. Then it block some platform can't boot.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
One issue is that macros defined in HeapGuard.h
GUARD_HEAP_TYPE_PAGE
GUARD_HEAP_TYPE_POOL
doesn't match the definition of PCD PcdHeapGuardPropertyMask in
MdeModulePkg.dec. This patch fixed it by exchanging the BIT0 and BIT1
of them.
Another is that method AdjustMemoryF() will return a bigger NumberOfPages than
the value passed in. This is caused by counting twice of a shared Guard page
which can be used for both head and tail Guard of the memory before it and
after it. This happens only when partially freeing just one page in the middle
of a bunch of allocated pages. The freed page should be turned into a new
Guard page.
Cc: Jie Lin <jie.lin@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
One issue is that macros defined in HeapGuard.h
GUARD_HEAP_TYPE_PAGE
GUARD_HEAP_TYPE_POOL
doesn't match the definition of PCD PcdHeapGuardPropertyMask in
MdeModulePkg.dec. This patch fixed it by exchanging the BIT0 and BIT1
of them.
Another is that method AdjustMemoryF() will return a bigger NumberOfPages than
the value passed in. This is caused by counting twice of a shared Guard page
which can be used for both head and tail Guard of the memory before it and
after it. This happens only when partially freeing just one page in the middle
of a bunch of allocated pages. The freed page should be turned into a new
Guard page.
Cc: Jie Lin <jie.lin@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Retire a whole bunch of ArmPlatformPkg PCDs that are either related
to the ARM BDS, to secure world execution or to stuff that has been
migrated to edk2-platforms.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Now that LcdGraphicsOutputDxe has been refactored, remove the old code
that is no longer used.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Create a new LcdGraphicsOutputDxe driver from the existing sources that
takes its hardware abstractions from a LcdHwLib library instance rather
than from a .c file linked directly. All we need is a new .inf file, and
a minimal tweak to LcdGraphicsOutputDxe.h to reuse the LcdHwlib prototypes
rather than open code them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
[ardb: add it to ArmPlatformPkg.dsc so we can build test it standalone]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Convert the HdLcd specific code of LcdGraphicsOutputDxe into a LcdHwlib
implementation that we will wire up later into LcdGraphicsOutputDxe.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Convert the PL111 specific code of LcdGraphicsOutputDxe into a LcdHwlib
implementation that we will wire up later into LcdGraphicsOutputDxe.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Add the declaration and include file for the new LcdHwLib library class,
which will allow us to abstract away from platform variations in the
LCD graphics output driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
[ardb: add NULL implementation as well and add it to ArmPlatformPkg.dsc]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Update TPM interrupt resource descriptor name for better compatibility to
old ASL compiler.
Cc: Long Qin <qin.long@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
> MdeModulePkg/Core/PiSmmCore/PiSmmCore.c: In function
> 'SmmReadyToBootHandler':
> MdeModulePkg/Core/PiSmmCore/PiSmmCore.c:323:14: error: passing argument
> 3 of 'SmmLocateProtocol' from incompatible pointer type [-Werror]
> );
> ^
> In file included from MdeModulePkg/Core/PiSmmCore/PiSmmCore.c:15:0:
> MdeModulePkg/Core/PiSmmCore/PiSmmCore.h:586:1: note: expected 'void **'
> but argument is of type 'struct EFI_SMM_SX_DISPATCH2_PROTOCOL **'
> SmmLocateProtocol (
> ^
> cc1: all warnings being treated as errors
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Fixes: 7b9b55b2ef
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
When UEFI receives ICMP echo packets it will enter Ip4IcmpReplyEcho
function, and then call Ip4Output. However, if Ip4Output gets some
error and exits early, e.g. fails to find the route entry, memory
buffer of "Data" gets no chance to be freed and memory leak will be
caused. If there is such an attacker in the network, we will see UEFI
runs out of memory and system hangs.
So we explicitly free the memory when error status is returned.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Junbiao Hong <hongjunbiao@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
The HostNameToIp() is a asynchronous function, so the caller
may free the HostName buffer immediately once HostNameToIp()
is returned. Then DNS driver may access the freed memory buffer
later.
This patch is to fix above issue.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wang Fan <fan.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
According to UEFI spec:
"Retry number if no response received after RetryInterval. If zero, use
the parameter configured through Dns.Configure() interface."
"Minimum interval of retry is 2 second. If the retry interval is less
than 2 second, then use the 2 second. If zero, use the parameter configured
through Dns.Configure() interface."
For both DNS.HostNameToIp and DNS.GeneralLookUp, the value of RetryCount /
RetryInterval need to be updated to comply with UEFI spec.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wang Fan <fan.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Otherwise, LegacyBoot may be triggered wrongly by other code in UEFI OS,
or vice versa.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Otherwise, it may be triggered wrongly by other code in OS.
This patch is to use S3 entry callback to determine if it will be
during S3 resume, and check it in SmmReadyToBootHandler().
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Rename SmmEndOfS3ResumeProtocolGuid to EndOfS3ResumeGuid as the GUID
may be used to install PPI in future to notify PEI phase code.
The references in UefiCpuPkg are also being updated.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This patch updates TcpIoConnect() and TcpIoAccept() that the Tcp.Cancel()
should be invoked to cancel the corresponding request when timeout occurs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
For TcpIoConnect() and TcpIoAccept(), this patch adds the check for Timeout event
before calling CheckEvent() service so as to avoid the unnecessary function call.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
One of the functionalities of CpuDxe is to update memory paging attributes.
If page table protection is applied, it must be disabled temporarily before
any attributes update and enabled again afterwards.
This patch makes use of the same way as DxeIpl to allocate page table memory
from reserved memory pool, which helps to reduce potential "split" operation
and recursive calling of SetMemorySpaceAttributes().
Laszlo (lersek@redhat.com) did a regression test on QEMU virtual platform with
one middle version of this series patch. The details can be found at
https://lists.01.org/pipermail/edk2-devel/2017-December/018625.html
There're a few changes after his work.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This patch will set the memory pages used for page table as read-only
memory after the paging is setup. CR0.WP must set to let it take into
effect.
A simple page table memory management mechanism, page table pool concept,
is introduced to simplify the page table memory allocation and protection.
It will also help to reduce the potential recursive "split" action during
updating memory paging attributes.
The basic idea is to allocate a bunch of continuous pages of memory in
advance as one or more page table pools, and all future page tables
consumption will happen in those pool instead of system memory. If the page
pool is reserved at the boundary of 2MB page and with same size of 2MB page,
there's no page granularity "split" operation will be needed, because the
memory of new page tables (if needed) will be usually in the same page as
target page table you're working on.
And since we have centralized page tables (a few 2MB pages), it's easier
to protect them by changing their attributes to be read-only once and for
all. There's no need to apply the protection for new page tables any more
as long as the pool has free pages available.
Once current page table pool has been used up, one can allocate another 2MB
memory pool and just set this new 2MB memory block to be read-only instead of
setting the new page tables one page by one page.
Two new PCDs PcdPageTablePoolUnitSize and PcdPageTablePoolAlignment are used
to specify the size and alignment for page table pool. For IA32 processor
0x200000 (2MB) is the only choice for both of them to meet the requirement of
page table pool.
Laszlo (lersek@redhat.com) did a regression test on QEMU virtual platform with
one middle version of this series patch. The details can be found at
https://lists.01.org/pipermail/edk2-devel/2017-December/018625.html
There're a few changes after his work.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
DUAL_ADDRESS_CYCLE is missing in the EFI_UNSUPPORTED
return status description.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Add a missing newline to the version string output that is displayed
on the serial console, or the next line will be appended to it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The ARM calling convention is fundamentally incompatible with EBC,
and having a cross compatible machine type identical to the native
type does not make a lot of sense either. So restrict the compatible
machine type for ARM to EFI_IMAGE_MACHINE_ARMTHUMB_MIXED, and remove
the cross compatible.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Move ClearFirst4KPage/IsNullDetectionEnabled definition from DxeIpl.h to
VirtualMemory.h as they are implemented in VirtualMemory.c and only used
in IA32/X64 ARCH.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
When printing the ascii format of memory attribute in debug message,
%s was used, but %a should be used.
The patch additionally changes %x to %r for EFI_STATUS.
The whole patch doesn't impact functionality of the MtrrLib.
Just debug message fix.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Ming Shao <ming.shao@intel.com>
In CheckRemainingSpaceForConsistencyInternal, one of the return paths leaves a loose
VA_COPY with no matching VA_END.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zenith432 <zenith432@users.sourceforge.net>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Seems object_files.lst is not added as dependency of lib target, this
patch update BaseTools to generate Makefile with this dependency.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Current code always return EFI_MEDIA_CHANGED no matter the media
is removed from CD/DVD drive or the media is changed.
It doesn't strictly follow the UEFI Spec.
Update code to return EFI_NO_MEDIA when media is removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Use LcdPlatformLib not LcdPlatformNullLib (which is the name of this
instance) as LIBRARY_CLASS attribute.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
If gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString is set to
a non-empty string, print it to the console at boot. Note that this
is independent of DEBUG/RELEASE or graphical vs serial console,
although we do attempt to stay clear of the logo and progress bar
in graphical mode, by printing it top center.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Now that we have removed all the cruft from ArmPlatformPkg, add a .DSC
file that builds all the remaining components standalone, i.e., outside
of the context of any particular platform. This is primarily intended
for build time testing.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In order to be able to build ArmPlatformPkg components outside of
the context of a particular platform, add Null implementation of
NorFlashPlatformLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In order to be able to build ArmPlatformPkg components outside of
the context of a particular platform, add Null implementation of
LcdPlatformlLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
PrePeiCoreMPCore reuses the GUID of its unicore sibling, which is
usually fine, given that platforms never include both. However, it
prevents us from creating a package .DSC that does include both, so
update the GUID to a fresh one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
ArmPlatformLibNullSec is built from a secondary .inf that omits
ArmPlatformLibNullMem.c from the [Sources] section so the library
can be used in a SEC context. This is slightly dodgy, given that
the resulting library is incomplete. Let's just remove this version,
since it isn't used anywhere anyway.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
None of the platforms we support use these so remove them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This driver is no longer used anywhere so remove it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This driver is not used by any platforms so remove it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Remove PL34xDmc driver which is not used by any platforms
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
No platform uses this so remove it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
No platforms use this driver so remove it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The HdLcd.h and PL111Lcd.h header files are internal headers that should
not be used by other drivers. So move them from Include/Drivers into the
driver directory instead.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Remove the PL011UartLib implementation that has been superseded by
the one under Library/
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
These modules have been imported into edk2-platforms where they belong
so remove them from the main EDK2 branch.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The only remaining user of ArmPlatformSysConfigLib has absorbed this
definition into its own edk2-platforms package, so let's remove it from
the shared code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Remove ArmVExpressPkg from EDK2 now that its contents have moved into
edk2-platforms/Platform/ARM where they belong.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Remove NorFlashArmVExpressLib now that it has been moved into edk2-platforms
where it belongs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Enable optimization for DEBUG builds, to make it more usable in terms of
performance, and to give more coverage to the LTO builds. Also, some
diagnostics are only enabled when optimization is enabled.
NOOPT builds can now also be created, which will retain the behavior DEBUG
builds had previously.
Note that this aligns ARM and AARCH64 with the x86 architectures, which
already use optimization for DEBUG builds.
In order to preserve existing behavior for users of older toolchains,
keep GCC49 and older as-is.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Extend the CLANG38 toolchain definition so it can be used for
ARM and AARCH64 as well. Note that this requires llvm-ar and
the LLVMgold.so linker plugin.
In preparation of doing the same for GCC5, this toolchain version
also departs from the custom of using -O0 for DEBUG builds, which
makes them needlessly slow. Instead, let's add a NOOPT flavor as
well, and enable optimization for DEBUG like the other architectures
do. (Note that this will require some trivial changes to the platform
description files)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BaseTools' BaseTypes.h defined the ENCODE_ERROR macro as
#define ENCODE_ERROR(a) ((RETURN_STATUS)(MAX_BIT | (a)))
whereas MdePkg defines it as
#define ENCODE_ERROR(StatusCode) ((RETURN_STATUS)(MAX_BIT | (StatusCode)))
When building with GCC 6.3 (at least) the former triggers
"error: overflow in implicit constant conversion [-Werror=overflow]"
Resolve this by aligning it with the latter one.
This also requires aligning the BaseTools typedef of RETURN_STATUS with
the MdePkg one: INTN -> UINTN.
While at it, update adjacent ENCODE_WARNING and RETURN_ERROR as well.
Add an explicit initialization of *Alignment to 0 in GenFfs.c
GetAlignmentFromFile to get rid of a warning occuring with GCC after
this change (-Werror=maybe-uninitialized).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Stack guard feature makes use of paging mechanism to monitor if there's a
stack overflow occurred during boot.
This patch will check setting of PCD PcdCpuStackGuard. If it's TRUE, DxeIpl
will setup page table and set the page at which the stack base locates to be
NOT PRESENT. If stack is used up and memory access cross into the last page
of it, #PF exception will be triggered.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Reviewed-by: Jiewen.yao@intel.com
Original API InitializeCpuExceptionHandlers is used in DxeMain to initialize
exception handlers but it does not support setting up stack switch required
by Stack Guard feature. Using the new API instead to make sure Stack Guard
feature is applicable to most part of code.
Since this API is called before memory service initialization, there's no
way to call AllocateXxx API to reserve memory. Global variables are used
for this special case. GDT table is reserved at least 2KB which should be
big enough for all current use cases.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Reviewed-by: Jiewen.yao@intel.com
In current MP implementation, BSP and AP shares the same exception
configuration. Stack switch required by Stack Guard feature needs that BSP
and AP have their own configuration. This patch adds code to ask BSP and AP
to do exception handler initialization separately.
Since AP is not supposed to do memory allocation, all memory needed to
setup stack switch will be reserved in BSP and pass to AP via new API
EFI_STATUS
EFIAPI
InitializeCpuExceptionHandlersEx (
IN EFI_VECTOR_HANDOFF_INFO *VectorInfo OPTIONAL,
IN CPU_EXCEPTION_INIT_DATA *InitData OPTIONAL
);
Following two new PCDs are introduced to configure how to setup new stack
for specified exception handlers.
gUefiCpuPkgTokenSpaceGuid.PcdCpuStackSwitchExceptionList
gUefiCpuPkgTokenSpaceGuid.PcdCpuKnownGoodStackSize
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Reviewed-by: Jiewen.yao@intel.com
In current implementation of CPU MP service, AP is initialized with data
copied from BSP. Stack switch required by Stack Guard feature needs different
GDT, IDT table and task gates for each logic processor. This patch adds GDTR,
IDTR and TR into structure CPU_VOLATILE_REGISTERS and related code in save
and restore methods. This can make sure that any changes to GDT, IDT and task
gate for an AP will be kept from overwritten by BSP settings.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Reviewed-by: Jiewen.yao@intel.com
This patch add implementation of following new API introduced into
CpuExceptionHandlerLib. Since this lib hasn't support Stack Guard
and stack switch, the new method just calls original
InitializeCpuExceptionHandlers.
EFI_STATUS
EFIAPI
InitializeCpuExceptionHandlersEx (
IN EFI_VECTOR_HANDOFF_INFO *VectorInfo OPTIONAL,
IN CPU_EXCEPTION_INIT_DATA *InitDataEx OPTIONAL
);
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
If Stack Guard is enabled and there's really a stack overflow happened during
boot, a Page Fault exception will be triggered. Because the stack is out of
usage, the exception handler, which shares the stack with normal UEFI driver,
cannot be executed and cannot dump the processor information.
Without those information, it's very difficult for the BIOS developers locate
the root cause of stack overflow. And without a workable stack, the developer
cannot event use single step to debug the UEFI driver with JTAG debugger.
In order to make sure the exception handler to execute normally after stack
overflow. We need separate stacks for exception handlers in case of unusable
stack.
IA processor allows to switch to a new stack during handling interrupt and
exception. But X64 and IA32 provides different ways to make it. X64 provides
interrupt stack table (IST) to allow maximum 7 different exceptions to have
new stack for its handler. IA32 doesn't have IST mechanism and can only use
task gate to do it since task switch allows to load a new stack through its
task-state segment (TSS).
The new API, InitializeCpuExceptionHandlersEx, is implemented to complete
extra initialization for stack switch of exception handler. Since setting
up stack switch needs allocating new memory for new stack, new GDT table
and task-state segment but the initialization method will be called in
different phases which have no consistent way to reserve those memory, this
new API is allowed to pass the reserved resources to complete the extra
works. This is cannot be done by original InitializeCpuExceptionHandlers.
Considering exception handler initialization for MP situation, this new API
is also necessary, because AP is not supposed to allocate memory. So the
memory needed for stack switch have to be reserved in BSP before waking up
AP and then pass them to InitializeCpuExceptionHandlersEx afterwards.
Since Stack Guard feature is available only for DXE phase at this time, the
new API is fully implemented for DXE only. Other phases implement a dummy
one which just calls InitializeCpuExceptionHandlers().
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Reviewed-by: Jiewen.yao@intel.com
The new definitions include two structures
IA32_TASK_STATE_SEGMENT
IA32_TSS_DESCRIPTOR
two macros
IA32_GDT_TYPE_TSS
IA32_GDT_ALIGNMENT
and one API
VOID
EFIAPI
AsmWriteTr (
IN UINT16 Selector
);
They're needed to setup task gate and interrupt stack table for stack switch.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Reviewed-by: Jiewen.yao@intel.com
A new API InitializeCpuExceptionHandlersEx() is introduced to support
initializing exception handlers with extra functionalities which need
extra init data, such as stack switch for Stack Guard feature.
EFI_STATUS
EFIAPI
InitializeCpuExceptionHandlersEx (
IN EFI_VECTOR_HANDOFF_INFO *VectorInfo OPTIONAL,
IN CPU_EXCEPTION_INIT_DATA *InitData OPTIONAL
);
By default, this method should include all functionalities implemented by
InitializeCpuExceptionHandlers(), plus extra initialization works, if any.
This is could be done by calling InitializeCpuExceptionHandlers() directly
in this method besides the extra works.
InitData is optional and its use and content are processor arch dependent.
The typical usage of it is to convey resources which have to be reserved
elsewhere and are necessary for the extra initialization of exception.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Reviewed-by: Jiewen.yao@intel.com
Stack switch is required by Stack Guard feature. Following two PCDs are
introduced to simplify the resource allocation for initializing stack switch.
gUefiCpuPkgTokenSpaceGuid.PcdCpuStackSwitchExceptionList
gUefiCpuPkgTokenSpaceGuid.PcdCpuKnownGoodStackSize
PcdCpuStackSwitchExceptionList is used to specify which exception will
have separate stack for its handler. For Stack Guard feature, #PF must
be specified at least.
PcdCpuKnownGoodStackSize is used to specify the size of knwon good stack for an
exception handler. Cpu driver or other drivers should use this PCD to reserve
new stack memory for exceptions specified by above PCD.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Reviewed-by: Jiewen.yao@intel.com
PcdCpuStackGuard is introduced to enable/disable Stack Guard feature.
Its value is FALSE by default. This feature is suggested to be enabled
only if the cpu driver and CpuExceptionHandlerLib have supported stack
switch for the processor used in platform. Otherwise the exception dump
message won't be printed out when there's a stack overflow happened.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Reviewed-by: Jiewen.yao@intel.com
Current implementation uses following two methods
EnableNullDetection()
DisableNullDetection()
to enable/disable page 0. These two methods will check PCD
PcdNullPointerDetectionPropertyMask to know if the page 0 is disabled or not.
This is due to the fact that old GCD service doesn't provide paging related
attributes of memory block. Since this issue has been fixed, GCD services
can be used to determine the paging status of page 0. This is also make it
possible to just use a new macro
ACCESS_PAGE0_CODE(
<code accessing page 0>
);
to replace above methods to do the same job, which also makes code more
readability.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Current implementation uses following two methods
EnableNullDetection()
DisableNullDetection()
to enable/disable page 0. These two methods will check PCD
PcdNullPointerDetectionPropertyMask to know if the page 0 is disabled or not.
This is due to the fact that old GCD service doesn't provide paging related
attributes of memory block. Since this issue has been fixed, GCD services
can be used to determine the paging status of page 0. This is also make it
possible to just use a new macro
ACCESS_PAGE0_CODE(
<code accessing page 0>
);
to replace above methods to do the same job, which also makes code more
readability.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Due to the introduction of NULL pointer detection feature, page 0 will be
disabled if the feature is enabled, which will cause legacy code failed to
update legacy data in page 0. This macro is introduced to make sure the
page 0 is enabled before those code and restore the original status of it
afterwards.
Another reason to introduce this macro is to eliminate the dependency on
the PcdNullPointerDetectionPropertyMask. Because this is a new PCD, it
could cause some backward compatibility issue for some old packages.
This macro will simply check if the page 0 is disabled or not. If it's
disabled, it will enable it before code updating page 0 and disable it
afterwards. Otherwise, this macro will do nothing to page 0.
The usage of the macro will be look like (similar to DEBUG_CODE macro):
ACCESS_PAGE0_CODE(
<code accessing page 0>
);
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=573https://bugzilla.tianocore.org/show_bug.cgi?id=796
The same issue is reported again by GCC. Resend this patch again.
This patch renames the duplicated function name to fix it.
The SecPeiDebugAgentLib uses the global variable
mMemoryDiscoveredNotifyList for a PPI notification on
the Memory Discovered PPI. This same variable name is
used in the DxeIplPeim for the same PPI notification.
The XCODE5 tool chain detects this duplicate symbol
when the OVMF platform is built with the flag
-D SOURCE_DEBUG_ENABLE.
The fix is to rename this global variable in the
SecPeiDebugAgentLib library.
Cc: Andrew Fish <afish@apple.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
If PCD value is not set, register PcdCallBack to hook PCD value set
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Only DumpCpuContext in error case, otherwise there will be too many
debug messages from DumpCpuContext() when SmmProfile feature is enabled
by setting PcdCpuSmmProfileEnable to TRUE. Those debug messages are not
needed for SmmProfile feature as it will record those information to
buffer for further dump.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
clang, when used as a preprocessor for dtc, does not discard #pragma
statements although -x assembler-with-cpp is specified. This causes dtc
to barf at a #pragma pack() statement that is already filtered out for
__GNUC__. So add a check to also filter this out if __ASSEMBLER__.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Handle CommSize OPTIONAL case for SmmCommunicate.
And return EFI_ACCESS_DENIED when CommunicationBuffer
is not valid for SMM to access.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The TFTP command was converted from a NULL class library instance to
a dynamic shell command in commit 0961002352.
The ShellLib and FileHandleLib resolutions are moved from
Shell app <LibraryClasses> to [LibraryClasses.common]
because dynamic shell commands implemented as DXE_DRIVER modules
also depend on these libraries.
PcdShellLibAutoInitialize must be set to FALSE for both the shell app
itself and the dynamic shell command modules.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Address an incorrect function prototype (using ; instead of ,)
in AndroidBootImg.h.
Also restructure code slightly to avoid a "may be used uninitialized"
warning.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In order to allow the ArmVirtPkg platforms to be built using the
NOOPT target, add it explicitly to the BUILD_TARGETS define.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In wireless connection, connecting state needs to be cared more
about. ECR 1772 redefined the state EFI_NOT_READY to represent
connecting state and can be retrieved from Aip protocol. This
patch adds a new API to check media state at a specified time
interval when network is connecting until the connection process
finishes or timeout.
V2:
* Return error status code directly when Aip protocol falied to detect
media rather than wait for another time's check.
* Set media state default value to EFI_SUCCESS since some platforms may
not support retrieving media state from Aip protocol.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
This commit removes unnecessary parentheses in 'if' statements to
resolve the build failures by the XCODE5 tool chain.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This commit removes unnecessary parentheses in 'if' statements to
resolve the build failures by the XCODE5 tool chain.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In commit 7eb927db3e ("MdeModulePkg/DxeCore: implement memory protection
policy", 2017-02-24), we added two informative messages with the
InitializeDxeNxMemoryProtectionPolicy() function:
> InitializeDxeNxMemoryProtectionPolicy: applying strict permissions to
> active memory regions
and
> InitializeDxeNxMemoryProtectionPolicy: applying strict permissions to
> inactive memory regions
The messages don't report errors or warnings, thus downgrade their log
masks from DEBUG_ERROR to DEBUG_INFO.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1520485
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
It fixes the warning for loop has empty body [-Werror,-Wempty-body].
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liang Vincent <vincent.liang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Sort and merge memory resource entries to handle the case that
the memory resource HOBs are reported differently between
BOOT_ON_FLASH_UPDATE boot mode and normal boot mode, and the
capsule buffer from UpdateCapsule at normal boot sits across
two memory resource descriptors at BOOT_ON_FLASH_UPDATE boot mode.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Dakota Chiang <dakota.chiang@intel.com>
Tested-by: Dakota Chiang <dakota.chiang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
This patch add new option --dummy file, and we compare the dummpy file
with input file to decide whether we need to set PROCESSING_REQUIRED
value.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Update GenFfs tool to get alignment value from SectionFile when use
the new option -n 0.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Commit f6b139b added return status handling to PciIo->Mem.Write.
However, the second status handling will override EFI_DEVICE_ERROR
returned in this branch:
//
// Check the NVMe cmd execution result
//
if (Status != EFI_TIMEOUT) {
if ((Cq->Sct == 0) && (Cq->Sc == 0)) {
Status = EFI_SUCCESS;
} else {
Status = EFI_DEVICE_ERROR;
^^^^^^^^^^^^^^^^
Since PciIo->Mem.Write will probably return SUCCESS, it causes
NvmExpressPassThru to return SUCCESS even when DEVICE_ERROR occurs.
Callers of NvmExpressPassThru will then continue executing which may
cause further unexpected results, e.g. DiscoverAllNamespaces couldn't
break out the loop.
So we save previous status before calling PciIo->Mem.Write and restore
the previous one if it already contains error.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The two instantiations of LcdGraphicsOutputDxe reference VExpressPkg.dec
without actually relying on anything it defines. In preparation of
moving out VExpressPkg into edk2-platforms, drop these references so we
can keep LcdGraphicsOutputDxe in EDK2.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Now that the last user has switched to the generic BDS, the
PlatformIntelBdsLib code in ArmPlatformPkg is no longer used, so
remove it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
ArmVirtXen is the only remaining consumer of ArmPlatformPkg's
PlatformIntelBdsLib implementation, which is tightly coupled to the
deprecated Intel BDS. So move ArmVirtXen to the generic BDS as well,
allowing us to get rid of PlatformIntelBdsLib entirely.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Julien Grall <julien.grall@linaro.org>
When Dynamic command drivers links to ShellLib, the ShellLib
constructor shouldn't be called because the Shell and ShellParameters
protocols don't exist when the driver starts.
So it's required to set PcdShellLibAutoInitialize to FALSE for
dynamic command drivers.
Update the comments in DEC file to describe such requirement
for this PCD.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Remove FvSimpleFileSystemDxe from Quark.dsc/fdf because it's not
needed by using DpDynamicCommand driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Kelly Steele <kelly.steele@intel.com>
The USED_SIZE FV_EXT_TYPE is introduced by PI 1.6 spec.
The EFI_FIRMWARE_VOLUME_EXT_ENTRY_USED_SIZE_TYPE can be used to find
out how many EFI_FVB2_ERASE_POLARITY bytes are at the end of the FV.
When the FV gets shadowed into memory you only need to copy the used
bytes into memory and fill the rest of the memory buffer with the
erase value.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
No need to allocate aligned buffer if FvImage has been
at required alignment.
Then the code logic will be aligned with ProcessFvFile() in
MdeModulePkg/Core/Pei/FwVol/FwVol.c.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The USED_SIZE FV_EXT_TYPE is introduced by PI 1.6 spec.
The EFI_FIRMWARE_VOLUME_EXT_ENTRY_USED_SIZE_TYPE can be used to find
out how many EFI_FVB2_ERASE_POLARITY bytes are at the end of the FV.
When the FV gets shadowed into memory you only need to copy the used
bytes into memory and fill the rest of the memory buffer with the
erase value.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The definitions are introduced by PI 1.6 spec.
The EFI_FIRMWARE_VOLUME_EXT_ENTRY_USED_SIZE_TYPE can be used to find
out how many EFI_FVB2_ERASE_POLARITY bytes are at the end of the FV.
When the FV gets shadowed into memory you only need to copy the used
bytes into memory and fill the rest of the memory buffer with the
erase value.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PrePi does not use anything from IntelFrameworkModulePkg so remove
the reference from its [Packages] sections.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Now that PrePi no longer exposes its internal code via special HOBs,
we can remove the special handling of the primary FV, which needed to
be reserved so that DXE core could call into the PE/COFF and LZMA
libraries in the PrePi module.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Udit Kumar <udit.kumar@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
[ardb: updated commit log]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Avoid the need to preserve all memory exposed by PrePi indefinitely
by removing the 'feature' that exposes the PE/COFF and LZMA libraries
via special HOBs to other modules that may want to reuse the code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The common MemoryInitPeiLib implementation preserves the primary FV
holding the PrePi module and the compressed secondary FV, and removes
the memory it occupies from the memory map, hiding it from the OS.
The only platform that actual requires this is BeagleBoardPkg, since
it exposes the PeCoff and LZMA libraries in PrePi to DXE core via
special HOBs. So let's give BeagleBoard its own MemoryInitPeiLib, so
that we can clean up the generic version.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Clone the PrePi implementation for BeagleBoardPkg, so we can start
removing some of the awkward optimizations that we'd rather not keep
in reference code. Note that we only clone the unicore ARM flavor,
which is all we need for BeagleBoard.
In the case of PrePi, it involves libraries included by the SEC
startup code that are exposed to DXE core via HOBs containing function
pointers, which forces us to keep the primary FV reserved in memory.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Call ProcessLibraryConstructorList () to invoke all library constructors
by hand rather than calling only some of them explicitly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The BeagleBoard platform uses PeCoffLib and CustomDecompressLib
implementations that invoke the library code that resides in the PrePi
module via pointers exposed via special GUIDed HOBs. This is a nice hack,
but not necessarily something we want to carry in reference code.
So as a first step, move the libraries that expose this reused code into
BeagleBoardPkg, and remove it from EmbeddedPkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Move the internal PL031 RTC header file into the driver directory.
It shouldn't be referenced directly by other modules anyway.
While at it, sort the includes as well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Move the internal SP805 watchdog header file into the driver directory.
It shouldn't be referenced directly by other modules anyway.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Move the internal PL061 GPIO header file into the driver directory.
It shouldn't be referenced directly by other modules anyway.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The function ArmPlatformInitializeSystemMemory() is defined by
ArmPlatformLib, but is only ever called when using the PrePeiCore
flavor of the startup code. Also, none of the remaining upstream
platforms actually implement anything in that function in the first
place. So let's just remove it altogether.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The ARM_SYSTEM_MEMORY_REGION_DESCRIPTOR struct type is defined but
never used anywhere. So remove it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
ArmVExpressLibCTA9x4 is unused, and rather outdated, given that it is
the last ArmPlatformLib implementation that executes both in the secure
and non-secure worlds, which is a model we no longer support for ARM
systems. So remove it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Having a special porting manual for ARM platforms in general suggests
that ARM platforms are fundamentally different from ones based on other
architectures that are supported by UEFI. There may be some truth to
that, but the porting manual in Documentation/ArmPlatformPkg.txt is
hopelessly outdated, and did not give the best advice in the first
place*. So remove it.
* ArmPlatformLib as the mother of all platform abstractions is rather
unwieldy, and using ArmVExpressLibCTA9x4 as a template is not that
great an idea either.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The TFTP command was converted from a NULL class library instance to a
dynamic shell command in commit 0961002352.
The ShellLib and FileHandleLib resolutions are moved from
[LibraryClasses.common.UEFI_APPLICATION] to [LibraryClasses.common]
because dynamic shell commands are implemented as DXE_DRIVER modules.
PcdShellLibAutoInitialize must be set to FALSE for both the shell app
itself and the dynamic shell command modules.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
[lersek@redhat.com: extend commit message]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Build-tested-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
For whatever reason, EmbeddedPkg.dsc included a FLASH_DEFINITION entry
pointing to a nonexistent EmbeddedPkg.fdf.
This used to be silently ignored, but recent BaseTools changes
5e9256cd7f ("BaseTools: Guid.xref contain information from FILE statements in FDF")
now caused builds against EmbeddedPkg.dsc to fail.
So delete the redundant entry.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Place the tool that takes much build time at the first. This can improve
build performance when make -j N used.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=786
After GNUmakefile dependency is fixed up, it can make with -j N to enable
multiple thread build in base tools C source and save build time.
In my linux host machine, make -j 4 to compile BaseTools and save ~60% time.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=540
To consume FIT table for Microcode update,
UefiCpuPkg/Feature/Capsule/MicrocodeUpdateDxe
needs to be updated to consume
IntelSiliconPkg/Include/IndustryStandard/FirmwareInterfaceTable.h,
but UefiCpuPkg could not depend on IntelSiliconPkg.
Since the Microcode update feature is specific to Intel,
we can first move the Microcode update feature code from
UefiCpuPkg to IntelSiliconPkg [first step], then update
the code to consume FIT table [second step].
This patch series is for the first step.
Note: No any code change in this patch, just move.
Next patch will update MicrocodeUpdate to build with the package.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
After commit 91cc526b15 "MdeModulePkg/SerialDxe: Fix not able to change
serial attributes", serial is initialized using the reset method that
will call SetAttributes.
However, SetAttributes may return EFI_INVALID_PARAMETER when a driver
does not support some parameters. This will be propagated by the reset
function and lead to UEFI failing to get the console setup.
For instance, this is the case when using the Xen console driver.
Fix it by introspecting the result and return EFI_SUCCESS when the
SetAttributes report an invalid parameter (i.e EFI_INVALID_PARAMETER).
Contributed-under: Tianocore Contribution Agreement 1.1
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
SerialSetAttributes is meant to match the behavior of the function
EFI_SERIAL_IO_PROTOCOL.SetAttributes() in the UEFI spec (v2.7). This
means the function can only return:
- EFI_SUCCESS
- EFI_INVALID_PARAMETER
- EFI_DEVICE_ERROR
However the function SerialPortSetAttributes may also validly return
EFI_UNSUPPORTED. For instance this is the case of the Xen Console
driver.
EFI_UNSUPPORTED could be also interpreted as "One or more of the attributes
has an unsupported value". So return EFI_INVALID_PARAMETER in that case.
Lastly, to prevent another return slipping in the future, all the errors
but EFI_INVALID_PARAMETER and EFI_UNSUPPORTED will return
EFI_DEVICE_ERROR.
Contributed-under: Tianocore Contribution Agreement 1.1
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Per the UEFIv2.7 spec, EFI_DEVICE_ERROR is returned when the serial
device is not functioning correctly. Update the description to avoid
confusion.
Contributed-under: Tianocore Contribution Agreement 1.1
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
DXE performance gauge record access functions might be reentered since
we are supporting something like USB hot-plug, which is a timer event
where gBS->ConnectController might be called and then PERF will be
called in CoreConnectSingleController.
When StartGaugeEx is being reentered, not only the gauge record might
be overwritten, more serious situation will be caused if gauge data
buffer reallocation procedure is interrupted, between line 180 and 187
in DxeCorePerformanceLib.c specifically. There, mMaxGaugeRecords will
be doubled twice (denoted as 4X), but mGaugeData only points to a
buffer of size 2X, which will probably cause the following 2X memory
to be overflowed when gauge records are increased.
So we add EFI lock with TPL_NOTIFY in StartGaugeEx/EndGaugeEx/GetGaugeEx
to avoid memory overflow and gauge data corruption.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Add Ruiyu as MdeModulePkg reviewer,
especially for some Domains.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This way depends on VS vswhere.exe to find VS2017 installed directory.
vswhere.exe starts in Visual Studio 2017 version 15.2.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
UPD allocation and patching can be done outside FspWrapper
as implementation choice so adding a PCD to select between
original FspWrapper allocation model or outside model
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Original code breaks a single assembly code to multiple lines.
But, when VS CL.exe preprocesses the FixedPcdGet32() macro
invocation to the replacement text, it loses '\', and causes
NASM to fail.
Changing the multiple lines to one line to resolve the build failure.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
When dynamic command drivers are built into FV and start during
boot, they fails. Because Shell protocol doesn't exist during boot.
The patch sets Shell protocol and also set PcdShellLibAutoInitialize
to FALSE to ensure that
1. Shell protocol check doesn't happen in driver's entry point.
2. Driver can get the Shell protocol in DynamicCommand.Handler().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The previous change in ShellLib: "commit
3d29f8c5e3
* ShellPkg/ShellLib: Constructor doesn't depend on ShellParameters"
resolved the issue when loading dynamic command driver from Shell
environment.
But when dynamic command driver is built into FV and started during
boot, the driver still fails to start because Shell protocol doesn't
exist at that time.
The patch changes ShellLib to:
1. Do not look for Shell and ShellParameters protocol when they are
non-NULL in ShellLibConstructorWorker();
The two protocols are assumed to be set by DynamicCommand.Handler.
When ShellInitialize() is called in DynamicCommand.Handler, this
change can prevent the two protocols to be changed to NULL by
the locating logic.
2. Do not reset the Shell and ShellParameters protocol to NULL in
ShellLibDestructor() when CloseProtocol() fails;
Dynamic command driver needs to set the PcdShellLibAutoInitialize
to FALSE in order to skip the constructor.
Current logic calls ShellLibDestructor() when the PCD is FALSE when
ShellInitialize() is called. The change prevent the two protocols
to be changed to NULL.
The two changes don't impact existing usage case so they are backward
compatible.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Current implementation resets the CTRL-C event early when printing
the shell prompt, when user types "<CTRL-C>ls<ENTER>", "ls" command
is terminated immediately when starts.
It's not an expected behavior from users' perspective.
Correct way is to reset the CTRL-C event just before running the
command, which is a bit later than current point.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
This patch caused Windows 10 S4 resume failure.
Considering the similar changes are reverted from PciBus driver,
revert the patch from AtaAtapiPassThru as well.
Revert "MdeModulePkg/AtaAtapiPassThru: disable the device
at ExitBootServices()"
This reverts commit 6fb8ddd36b.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This patch caused Windows 10 S4 resume failure.
Considering the similar changes are reverted from PciBus driver,
revert the patch from AtaAtapiPassThru as well.
Revert "MdeModulePkg/AtaAtapiPassThru: disable only BM-DMA at
ExitBootServices()"
This reverts commit 76fd5a660d.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This means that SetBootOrderFromQemu() will preserve all UEFI boot options
matched by any given OFW devpath, such as PXEv4, HTTPv4, PXEv6 and HTTPv6
boot options for the same NIC. Currently we stop the matching / appending
for the OFW devpath coming from the outer loop whenever we find the first
UEFI boot option match in the inner loop.
(The previous patch was about multiple OFW devpaths matching a single UEFI
boot option (which should never happen). This patch is about a single OFW
devpath matching multiple UEFI boot options. With the "break" statement
removed here, the small optimization from the last patch becomes a bit
more relevant, because now the inner loop always counts up to
ActiveCount.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The SetBootOrderFromQemu() function implements a nested loop where
- the outer loop iterates over all OpenFirmware (OFW) device paths in the
QEMU boot order, and translates each to a UEFI device path prefix;
- the inner loop matches the current (translated) prefix against all
active UEFI boot options in turn;
- if the UEFI boot option is matched by the translated prefix, the UEFI
boot option is appended to the "new" UEFI boot order, and marked as
"has been appended".
This patch adds a micro-optimization where already matched / appended UEFI
boot options are skipped in the inner loop. This is not a functional
change. A functional change would be if, as a consequence of the patch,
some UEFI boot options would no longer be *doubly* matched.
For a UEFI boot option to be matched by two translated prefixes, one of
those prefixes would have to be a (proper, or equal) prefix of the other
prefix. The PCI and MMIO OFW translation routines output such only in the
following cases:
- When the original OFW device paths are prefixes of each other. This is
not possible from the QEMU side. (Only leaf devices are bootable.)
- When the translation rules in the routines are incomplete, and don't
look at the OFW device paths for sufficient length (i.e., at nodes where
they would already differ, and the difference would show up in the
translation output).
This would be a shortcoming of the translation routines and should be
fixed in TranslatePciOfwNodes() and TranslateMmioOfwNodes(), whenever
identified.
Even in the second case, this patch would replace the double appending of
a single UEFI boot option (matched by two different OFW device paths) with
a correct, or cross-, matching of two different UEFI boot options. Again,
this is not expected, but arguably it would be more correct than duplicate
boot option appending, should it occur due to any (unexpected, unknown)
lack of detail in the translation routines.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
UEFI Shell spec defines Shell Dynamic Command protocol which is just
for the purpose to extend internal command.
So dp command is changed from NULL class library to be a driver
producing DynamicCommand protocol.
The guideline is:
1. Only use NULL class library for Shell spec defined commands.
2. New commands can be provided as not only a standalone application
but also a dynamic command. So it can be used either as an
internal command, but also as a standalone application.
DpApp.inf is to provide a standalone application.
DpDynamicCommand.inf is to provide a standalone driver producing
Dynamic Command protocol.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
UEFI Shell spec defines Shell Dynamic Command protocol which is just
for the purpose to extend internal command.
So tftp command is changed from NULL class library to be a driver
producing DynamicCommand protocol.
The guideline is:
1. Only use NULL class library for Shell spec defined commands.
2. New commands can be provided as not only a standalone application
but also a dynamic command. So it can be used either as an
internal command, but also as a standalone application.
TftpApp.inf is to provide a standalone application.
TftpDynamicCommand.inf is to provide a standalone driver producing
Dynamic Command protocol.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
When ShellLib is linked to a driver producing DynamicCommand
protocol, ShellParameters protocol is set by
DynamicCommand.Handler().
The driver image handle doesn't have ShellParameters protocol
installed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Once the paging capabilities were filtered out, there might be some adjacent entries
sharing the same capabilities. It's recommended to merge those entries for the OS
compatibility purpose.
This patch makes use of existing method MergeMemoryMap() to do it. This is done by
simply turning this method from static to extern, and call it after filter code.
This patch is related to an issue described at
https://bugzilla.tianocore.org/show_bug.cgi?id=753
This patch is also passed test of booting follow OSs:
Windows 10
Windows Server 2016
Fedora 26
Fedora 25
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
The PrePi code we inherited from ArmPlatformPkg contains a rather
obscure optimization, where entry points of the PE/COFF and LZMA
handling routines are recorded in special HOBs, allowing DXE core
to call into that code directly rather than carry its own copy of
these libraries.
Given that no ArmVirtPkg platforms actually include the library
resolutions* that take advantage of these optimizations, let's not
bother with them, and remove the associated code.
* EmbeddedPkg/Library/LzmaHobCustomDecompressLib/LzmaHobCustomDecompressLib.inf
EmbeddedPkg/Library/DxeHobPeCoffLib/DxeHobPeCoffLib.inf
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Under the following scenario:
- no UEFI bootable application available anywhere in the system,
- ... not even for the default platform recovery option,
- no shell is built into the firmware image,
- but UiApp is available in the firmware image,
we should preferably not just hang in BdsEntry() with:
DEBUG ((EFI_D_ERROR, "[Bds] Unable to boot!\n"));
CpuDeadLoop ();
while the user sits at the TianoCore logo page, wondering what's going on.
Print an informative message to the console, wait for a keypress, and then
return to the Boot Manager Menu forever.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1515418
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=513
Suggested-by: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Replace "(UINT8 *)NewVariableData" with (UINT8 *)NewVariableData + Offset"
to avoid the header of EFI_SIGNATURE_LIST being copied to the front of
NewVariableData every time and update ListWalker when handling the current
EFI_SIGNATURE_LIST finishes.
Cc: Zhang Chao <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: chenc2 <chen.a.chen@intel.com>
Reviewed-by: Zhang Chao <chao.b.zhang@intel.com>
With the last user FdtPlatformDxe removed, we can finally get rid of the
last bit of ARM BDS related cruft.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
With the last users migrated to a private version, we can now remove
FdtPlatformDxe.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
EBL is a deprecated, small memory footprint alternative for the
UEFI Shell that is no longer in use by any platforms in EDK2 or
in edk2-platforms. To avoid confusion, let's remove it from the
tree.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
EBL is being phased out so remove ArmPlatformPkg's copy of EblCmdLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This library is not used anywhere so remove it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Remove ArmJunoPkg now that it has been moved into edk2-platforms
where it belongs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This implementation of ArmPlatformSecExtraActionLib is no longer used
anywhere so remove it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This library class is not used by any drivers, so remove it in its
entirety.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This module is not used anywhere under edk2 or edk2-platforms, so let's
remove it. This removes the only dependency on ArmPlatformLib from ArmPkg.
While at it, remove a mention of ArmPlatformPkg from a comment in the
.dec file as well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The only user of ArmPlatformLib's ArmGetCpuCountPerCluster () is itself
an ArmPlatformLib implementation, i.e., ArmVExpressLibRTSM.
Given that we'd prefer to get rid of ArmPlatformLib entirely, let's
remove ArmGetCpuCountPerCluster () from the API as a first step.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The sum use these applications made of BdsLib was one invocation of the
IS_DEVICE_PATH_NODE macro, and (incorrectly) being able to leave out a
dependency on gEfiLoadedImageProtocolGuid.
So expand the macro in place and add the missing dependency.
Then clean up the .dsc, .inf and #includes accordingly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Gcc issued the warning when compiling CryptoPkg:
CryptoPkg/Library/Include/CrtLibSupport.h:135:17: warning: type of 'memset' does not match original declaration [-Wlto-type-mismatch]
void *memset (void *, int, size_t);
^
CryptoPkg/Library/IntrinsicLib/MemoryIntrinsics.c:27:8: note: type mismatch in parameter 2
void * memset (void *dest, char ch, size_t count)
^
This commit changes the type of ch from char to int to match the
declaration.
Cc: Qin Long <qin.long@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Qin Long <qin.long@intel.com>
Some OSs will treat EFI_MEMORY_DESCRIPTOR.Attribute as really
set attributes and change memory paging attribute accordingly.
But current EFI_MEMORY_DESCRIPTOR.Attribute is assigned by
value from Capabilities in GCD memory map. This might cause
boot problems. Clearing all paging related capabilities can
workaround it. The code added in this patch is supposed to
be removed once the usage of EFI_MEMORY_DESCRIPTOR.Attribute
is clarified in UEFI spec and adopted by both EDK-II Core and
all supported OSs.
Laszlo did a thorough test on OVMF emulated platform. The details
can be found at
https://bugzilla.tianocore.org/show_bug.cgi?id=753#c10
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
V2:
* Correct the commit log.
Currently, the return code of OPENSSL_init_ssl(0 or 1) and RandomSeed
(TRUE or FALSE) are not checked in TlsInitialize(). Also "VOID" is used
as the return type of TlsInitialize(), which can't be used to capture
the returned value for error handling.
From Long Qin (CryptoPkg owner):
The early version of OPENSSL_init_ssl() use the "VOID" as the return
value, which was updated to "int" later because the function changes
can fail.
So, this patch is to change the return type of TlsInitialize() to
follow up the OPENSSL_init_ssl() update.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Long Qin <qin.long@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
In the method DumpGuardedMemoryBitmap() and SetAllGuardPages(), the code
didn't check if the global mMapLevel is legal value or not, which leaves
a logic hole causing potential array overflow in code followed.
This patch adds sanity check before any array reference in those methods.
Cc: Wu Hao <hao.a.wu@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Wu Hao <hao.a.wu@intel.com>
The coding style requires that header files must be also added in module's inf
file, as long as they're included by c files. This patch will fix this issue.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Commit 19bd133562 is to fix the incorrect SizeofHeaders
returned from HttpTcpReceiveHeader(). But it missed the "\r\n\r\n" calculation, which
will cause the later HttpHeaders parsing failure.
This patch is fix the above issue.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
These libraries are no longer used, so remove them from the tree.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Move to the new ArmVirtMemInfoLib library to retrieve DRAM information
from the platform, so that we can phase out ArmPlatformLib going forward.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The QemuVirtMemInfoLib ArmVirtMemInfoLib implementation created for
ArmVirtQemuKernel does exactly what we need for ArmVirtQemu, the only
difference being that the latter is PrePeiCore based, and so it uses
a different method to ensure that PcdSystemMemorySize is set when
ArmVirtGetMemoryMap() is called.
On ArmVirtQemu, we currently abuse the implied ordering guarantees
provided by ArmPlatformLib, by implementing this as follows:
ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf [ArmVirtPkg/ArmVirtQemu.dsc]
InitializeMemory() [ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.c]
ArmPlatformInitializeSystemMemory() [ArmVirtPkg/Library/ArmVirtPlatformLib/Virt.c]
//
// set PcdSystemMemorySize from the DT
//
MemoryPeim() [ArmVirtPkg/Library/ArmVirtMemoryInitPeiLib/ArmVirtMemoryInitPeiLib.c]
InitMmu() [ArmVirtPkg/Library/ArmVirtMemoryInitPeiLib/ArmVirtMemoryInitPeiLib.c]
ArmPlatformGetVirtualMemoryMap() [ArmVirtPkg/Library/ArmVirtPlatformLib/VirtMem.c]
//
// consume PcdSystemMemorySize
//
Given that we are trying to get rid of ArmPlatformLib, or at least remove
some of these API functions that are never used for their original purpose
by any platforms, we need to move the PCD assignment elsewhere.
So create a PEIM-only version of QemuVirtMemInfoLib especially for
ArmVirtQemu, and add the PCD assignment code to its constructor.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Create a new ArmVirtMemInfoLib for ArmVirtQemuKernel by cloning the
existing ArmPlatformGetVirtualMemoryMap () for this platform,
(ArmQemuRelocatablePlatformLib *not* ArmVirtPlatformLib), and cleaning
it up:
- remove support for uncached DRAM mappings
- replace EFI_D_xxx with DEBUG_xxx throughout
- use a temp variable to hold the top of the physical address space
- use AllocatePool () instead of AllocatePages (), given that we use
160 bytes only, and the memory is never freed.
In a future patch, we will add this library to the ordinary ArmVirtQemu
platform as well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Clone the existing ArmPlatformGetVirtualMemoryMap () for this platform,
clean it up slightly (by using a static buffer rather than a heap
allocation, and removing the support for uncached DRAM mappings), and
turn it into a new ArmVirtMemInfoLib implementation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Julien Grall <julien.grall@linaro.org>
As part of the effort to get rid of ArmPlatformLib (which incorporates
far too many duties in a single library), introduce ArmVirtMemInfoLib
which will be invoked by our ArmVirtMemoryInitPeiLib implementation to
get a description of the virtual address space. This will allow us to
remove this functionality from ArmPlatformLib later, or, in the case of
ArmVirtXen and ArmVirtQemuKernel, drop ArmPlatformLib altogether.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
QEMU/KVM has very little tolerance for using anything except writeback
cacheable mappings of DRAM, so let's remove the 'feature' that allows
us to select uncached mappings at build time.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
PrePi doesn't use anything defined by this package so drop the bogus
dependency.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
ArmPlatformStackLib has hooks into primary/secondary core PCDs and
other ArmPlatformLib related junk, so let's simply set the stack
pointer directly. This is trivial given that our PrePi is unicore
only.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Remove the pointless dependency on ArmPlatformLib: none of the code we
call from it actually does anything useful.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
ArmVirtQemuKernel and ArmVirtXen use essentially the same code to
retrieve DRAM information from the DT /memory node at early boot,
and invoke it via the ArmPlatformPeiBootAction () hook exposed by
ArmPlatformLib. Let's move this code into the PrePi implementation
these platforms share between them (and not with any other platforms)
so we can eliminate another dependency on the messy ArmPlatformLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
QEMU and KVM based ARM/AARCH64 virtual machines only enter UEFI on
a single core, so ArmPlatformIsPrimaryCore() always returns true.
And even if it didn't, our code does absolutely nothing meaningful
based on its return value, so don't bother calling it, and remove
another frivolous dependency on ArmPlatformLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Remove GetPlatformPpi() from PrePi: it is not used anywhere.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Instead of invoking the library constructors of some libraries by
hand, invoke the generated function ProcessLibraryConstructorList
in AutoGen.c so all constructors are executed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Recent distro builds of GCC 6 enable PIE linking by default, and allow
the previous behavior to be restored by passing the -no-pie command line
argument. Support for this was implemented by commits 1894a7c64c and
3380a59123 but unfortunately, it turns out that GCC 5 does not support
this command line argument, and exits with an error.
To avoid the need for yet another toolchain tag, to distinguish between
GCC 5 and GCC 6, let's use our GCC linker scripts when building objects
from .aslc files. This will ensure that the extra sections that are added
by the PIE linker are discarded from the ELF binary, and so they will not
corrupt the resulting .acpi file.
This reverts
1894a7c64c BaseTools/tools_def AARCH64 ARM: disable PIE linking
3380a59123 BaseTools/tools_def AARCH64 ARM: disable PIE linking for .aslc sources
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Use FixedPCD's to set platform-specific values for RTC registers.
Specifically, the replaced macros are:
1) RTC_INIT_REGISTER_A
2) RTC_INIT_REGISTER_B
3) RTC_INIT_REGISTER_D
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Define FixedPCD's to replace macros in RTC driver, to allow
for platform-specific configurations.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Done:
if (EFI_ERROR (Status)) {
if (PciIo != NULL && Enabled) {
PciIo->Attributes (
PciIo,
EfiPciIoAttributeOperationSet,
OriginalAttributes,
NULL
);
}
}
In above codes, VS2012/VS2010 will report that "OriginalAttributes"
will be used without initialization. But in fact, when the if expression
is true(if (PciIo != NULL && Enabled)), the "OriginalAttributes" must be
initialized. In order to fix this false positive issue, we initialize the
"OriginalAttributes" after declaration.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Update the UhciPei driver to consume IOMMU_PPI to allocate DMA buffer.
If no IOMMU_PPI exists, this driver still calls PEI service to allocate
DMA buffer, with assumption that DRAM==DMA.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This patch is following 2c656af04d.
1. Fix typo "XHC" to "EHC".
2. Reinitialize Request(Phy/Map) and Data(Phy/Map)
in Urb, otherwise the last time value of them may
be used in error handling when error happens.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This reverts commit 5db417ed25.
"MdeModulePkg/PciBusDxe: Enable Bus Master on P2P bridges on demand"
We met some compatibility issues when doing Windows S4 resume.
Reverting the BME disabling patches to fix the S4 resume issue.
Signed-off-by: Ruiyu Ni <Ruiyu.ni@intel.com>
Signed-off-by: Michael Turner <michael.turner@microsoft.com>
Cc: Michael D Kinney <Michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This reverts commit 050763db07.
"MdeModulePkg/PciBus: Disable BME of all devices when entering RT"
We met some compatibility issues when doing Windows S4 resume.
Reverting the BME disabling patches to fix the S4 resume issue.
Signed-off-by: Ruiyu Ni <Ruiyu.ni@intel.com>
Signed-off-by: Michael Turner <michael.turner@microsoft.com>
Cc: Michael D Kinney <Michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
EfiBootManagerStartHotkeyService() asserts when "BootOptionSupport"
variable doesn't exist.
In fact, though "BootOptionSupport" variable is set in BdsDxe
module, it's possible that the variable is deleted by
PlatformBootManagerBeforeConsole().
The patch removes the assertion and adds code to handle the case.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=767
If a USB Mass Storage device does not support the Get
Max LUN command, then the USB I/O Protocol ControlTransfer()
service may return an error. If an error is returned for
this command, then assume that the device does not support
multiple LUNs and return a maximum LUN value of 0.
The USB Mass Storage Class Specification states that a
maximum LUN value larger than 0x0F is invalid. Add
a check to make sure this maximum LUN value is in this
valid range, and if it is not, then assume that the
device does not support multiple LUNs and return a
maximum LUN value of 0.
This change improves compatibility with USB FLASH drives
that do not support the Get Max LUN command or return
an invalid maximum LUN value.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=767
The USB I/O Protocol function ControlTransfer() has a DataLength
parameter that specifies the size of the Data buffer. The
UsbBusDxe module implements the USB I/O Protocol using the
services of the USB2 Host Controller Protocol. The DataLength
parameter in the USB2 Host Controller Protocol ControlTransfer()
service is an IN OUT parameter so the number of bytes actually
transferred is returned. Since the USB I/O Protocol
ControlTransfer() service can not return the number of bytes
actually transferred, the only option if the number of bytes
actually transferred is less than the number of bytes requested
is to return EFI_DEVICE_ERROR.
The change fixes an issue with a USB mass storage device that
responds with 0 bytes to the Get MAX LUN command.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
when build a single module with GenC/GenMake option, currently it will
direct return after create Autogen code files, then it cause MaList is
empty, which cause an incorrect error message is reported.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The build error is introduced by following check in:
2930ef9809235a4490c8
The Visual Studio older than 2015 doesn't support constant integer
in binary format (0bxxx). This patch changes them to BIT macro to
fix it. This patch also cleans up coding style about unmatched
comment for return value.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Bi Dandan <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Following check-in caused this issue:
2930ef9809
This issue is caused by assigning incorrect value to PoolHdr.Size
if the requested size is more than MAX_POOL_SIZE, because the SMM
core will actually allocate page memory instead of pool memory in
this situation.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Wu Hao <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Wu Hao <hao.a.wu@intel.com>
Tested-by: Wu Hao <hao.a.wu@intel.com>
In function FindFileEntry():
Instead of using the function parameter 'FileEntry', use a local
variable to store the buffer allocated for disk read operation.
For the below calling stack:
UdfOpenVolume() -> FindRootDirectory() -> FindFileEntry()
In FindFileEntry(), the call to 'DiskIo->ReadDisk()' is possible (e.g.
media change for a CD/DVD ROM device) to trigger a re-install of the
BlockIO(2) protocol which will further lead to a call of the BindingStop()
& BingdingStart() of the UdfDxe driver.
Meanwhile, for the above listed calling stack, the '**FileEntry'
parameter passed into FindFileEntry() is '&PrivFsData->Root'. 'PrivFsData'
is a driver-managed private data, it will be freed in BindingStop() and
re-allocate in BingdingStart().
In such case, if '*FileEntry' is used to store the allocated buffer, the
information will be lost if 'DiskIo->ReadDisk()' triggers a re-install of
the BlockIO(2) protocol. The subsequent call of the FreePool API:
FreePool (*FileEntry);
will cause issues.
This commit uses a local variable to store the allocated buffer.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
In order to create all of the children (El Torito standard and UDF) for
a CD/DVD media in an entry of the PartitionDriverBindingStart(), this
commit merges the discovery of the El Torito feature
(PartitionInstallElToritoChildHandles) into function
PartitionInstallUdfChildHandles.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Remove dependencies on gArmTokenSpaceGuid.PcdSystemMemoryBase and
gArmTokenSpaceGuid.PcdSystemMemorySize, the presence of which in
a [FixedPcd] section makes this module unusable for ArmVirtQemu.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
https://bugzilla.tianocore.org/show_bug.cgi?id=782
Update the Request Sense check for the Request Sense Key of
USB_BOOT_SENSE_UNIT_ATTENTION. For this Sense Key, the
Additional Sense Key to EFI_STATUS mappings are:
USB_BOOT_ASC_MEDIA_CHANGE -> EFI_MEDIA_CHANGE
USB_BOOT_ASC_NOT_READY -> EFI_NOT_READY
USB_BOOT_ASC_NO_MEDIA -> EFI_NOT_READY
All others -> EFI_DEVICE_ERROR
A USB flash drive is returning Request Sense Key of
USB_BOOT_SENSE_UNIT_ATTENTION and an Additional Sense Key of
USB_BOOT_ASC_NO_MEDIA for a few seconds before returning an
Additional Sense Key of USB_BOOT_ASC_MEDIA_CHANGE.
The current logic treats this initial Request Sense info as an
error and reties the command 5 times before failing completely.
With this change the USB Flash Drive works correctly.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When SEV is enabled, every debug message printed by OVMF to the
QEMU debug port traps from the guest to QEMU character by character
because "REP OUTSB" cannot be used by IoWriteFifo8. Furthermore,
when OVMF is built with the DEBUG_VERBOSE bit (value 0x00400000)
enabled in "gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel", then the
OvmfPkg/IoMmuDxe driver, and the OvmfPkg/Library/BaseMemEncryptSevLib
library instance that is built into it, produce a huge amount of
log messages. Therefore, in SEV guests, the boot time impact is huge
(about 45 seconds _additional_ time spent writing to the debug port).
While these messages are very useful for analyzing guest behavior,
most of the time the user won't be capturing the OVMF debug log.
In fact libvirt does not provide a method for configuring log capture;
users that wish to do this (or are instructed to do this) have to resort
to <qemu:arg>.
The debug console device provides a handy detection mechanism; when read,
it returns 0xE9 (which is very much unlike the 0xFF that is returned by
an unused port). Use it to skip the possibly expensive OUT instructions
when the debug I/O port isn't plugged anywhere.
For SEC, the debug port has to be read before each full message.
However:
- if the debug port is available, then reading one byte before writing
a full message isn't tragic, especially because SEC doesn't print many
messages
- if the debug port is not available, then reading one byte instead of
writing a full message is still a win.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen (Intel address) <jordan.l.justen@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The next patch will want to add a global variable to
PlatformDebugLibIoPort, but this is not suitable for the SEC
phase, because SEC runs from read-only flash. The solution is
to have two library instances, one for SEC and another
for all other firmware phases. This patch adds the "plumbing"
for the SEC library instance, separating the INF files and
moving the constructor to a separate C source file.
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen (Intel address) <jordan.l.justen@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
(1) In the PEI phase, the PCD database is maintained in a GUID HOB. In
OVMF, we load the PCD PEIM before any other PEIMs (using APRIORI PEI),
so that all other PEIMs can use dynamic PCDs. Consequently,
- the PCD GUID HOB is initially allocated from the temporary SEC/PEI
heap,
- whenever we introduce a dynamic PCD to a PEIM built into OVMF such
that the PCD is new to OVMF's whole PEI phase, the PCD GUID HOB (and
its temporary heap footprint) grow.
I've noticed that, if we add just one more dynamic PCD to the PEI
phase, then in the X64 build,
- we get very close to the half of the temporary heap (i.e., 8192
bytes),
- obscure PEI phase hangs or DXE core initialization failures
(ASSERTs) occur. The symptoms vary between the FD_SIZE_2MB and
FD_SIZE_4MB builds of X64 OVMF.
(2) I've found that commit
2bbd7e2fbd ("UefiCpuPkg/MtrrLib: Update algorithm to calculate
optimal settings", 2017-09-27)
introduced a large (16KB) stack allocation:
> The patch changes existing MtrrSetMemoryAttributeInMtrrSettings() and
> MtrrSetMemoryAttribute() to use the 4-page stack buffer for calculation.
> ...
> +#define SCRATCH_BUFFER_SIZE (4 * SIZE_4KB)
> ...
> @@ -2207,17 +2462,66 @@ MtrrSetMemoryAttributeInMtrrSettings (
> ...
> + UINT8 Scratch[SCRATCH_BUFFER_SIZE];
(3) OVMF's temp SEC/PEI RAM size has been 32KB ever since commit
7cb6b0e068 ("OvmfPkg: Move SEC/PEI Temporary RAM from 0x70000 to
0x810000", 2014-01-21)
Of that, the upper 16KB half is stack (growing down), and the lower
16KB half is heap.
Thus, OvmfPkg/PlatformPei's calls to "UefiCpuPkg/Library/MtrrLib", in
QemuInitializeRam(), cause the Scratch array to overflow the entire
stack (heading towards lower addresses), and corrupt the heap below
the stack. It turns out that the total stack demand is about 24KB, so
the overflow is able to corrupt the upper 8KB of the heap. If that
part of the heap is actually used (for example because we grow the PCD
GUID HOB sufficiently), mayhem ensues.
(4) Right after commit 7cb6b0e068 (see above), there would be no room
left above the 32KB temp SEC/PEI RAM. However, given more recent
commits
45d8708151 ("OvmfPkg/PlatformPei: rebase and resize the permanent
PEI memory for S3", 2016-07-13)
6b04cca4d6 ("OvmfPkg: remove PcdS3AcpiReservedMemoryBase,
PcdS3AcpiReservedMemorySize", 2016-07-12)
we can now restore the temp SEC/PEI RAM size to the original
(pre-7cb6b0e06809) 64KB. This will allow for a 32KB temp SEC/PEI
stack, which accommodates the ~24KB demand mentioned in (3).
(Prior patches in this series will let us monitor the stack usage in
the future.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=747
Ref: http://mid.mail-archive.com/a49cc089-12ae-a887-a4d6-4dc509233a74@redhat.com
Ref: http://mid.mail-archive.com/03e369bb-77c4-0134-258f-bdae62cbc8c5@redhat.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
"Main.asm" calls TransitionFromReal16To32BitFlat (and does some other
things) before it jumps to the platform's SEC entry point.
TransitionFromReal16To32BitFlat enters big real mode, and sets the DS, ES,
FS, GS, and SS registers to offset ("selector") LINEAR_SEL in the GDT
(defined in "UefiCpuPkg/ResetVector/Vtf0/Ia16/Real16ToFlat32.asm"). The
GDT entry ("segment descriptor") at LINEAR_SEL defines a segment covering
the full 32-bit address space, meant for "read/write data".
Document this fact for all the affected segment registers, as output
parameters for TransitionFromReal16To32BitFlat, saying "Selector allowing
flat access to all addresses".
For 64-bit SEC, "Main.asm" calls Transition32FlatTo64Flat in addition,
between calling TransitionFromReal16To32BitFlat and jumping to the SEC
entry point. Transition32FlatTo64Flat enters long mode. In long mode,
segmentation is largely ignored:
- all segments are considered flat (covering the whole 64-bit address
space),
- with the (possible) exception of FS and GS, whose bases can still be
changed, albeit with new methods, not through the GDT. (Through the
IA32_FS_BASE and IA32_GS_BASE Model Specific Registers, and/or the
WRFSBASE, WRGSBASE and SWAPGS instructions.)
Thus, document the segment registers with the same "Selector allowing flat
access to all addresses" language on the "Main.asm" level too, since that
is valid for both 32-bit and 64-bit modes.
(Technically, "Main.asm" does not return, but RBP/EBP, passed similarly to
the SEC entry point, is already documented as an output parameter.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Switch to the new, cleaned up PL011UartLib implementation so we will
be able to remove the old one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The PL011 code in ArmPlatformPkg is organized in a weird way: there is
a single PL011Uart.h header file under Include/Drivers containing both
register definitions and function entry points. The PL011Uart library
itself is in Drivers/ but it is actually a library.
So let's clean this up: add a new PL011UartLib library class and associated
header file containing only the library prototypes, and move the library
itself under Library/ using a new GUID, with the register definitions moved
into a local header file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
XenHypercallLib uses the 'hvc' instruction, which is not implemented
on all ARMv7 CPUs, and so we need to explicitly specify a CPU that
has the virtualization extensions.
This override used to be set at the platform level, but this was removed
in commit 0d36a219c7
('ArmPlatformPkg/PL031RealTimeClockLib: drop ArmPlatformSysConfigLib
reference), under the assumption that all users of the 'hvc' instruction
had already been fixed.
So fix this for GNU binutils by adding the 'virt' arch extension
directive, and for RVCT by setting the --cpu command line option to a
CPU that is virt capable.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Update the SdBlockIoPei driver to consume IOMMU_PPI to allocate DMA
buffer.
If no IOMMU_PPI exists, this driver still calls PEI service
to allocate DMA buffer, with assumption that DRAM==DMA.
This is a compatible change.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Update the EmmcBlockIoPei driver to consume IOMMU_PPI to allocate DMA
buffer.
If no IOMMU_PPI exists, this driver still calls PEI service
to allocate DMA buffer, with assumption that DRAM==DMA.
This is a compatible change.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
V2 changes:
Resource cleanup logic update in UfsEndOfPei().
V1 history:
Update the UfsBlockIoPei driver to consume IOMMU_PPI to allocate DMA
buffer.
If no IOMMU_PPI exists, this driver still calls PEI service
to allocate DMA buffer, with assumption that DRAM==DMA.
This is a compatible change.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
1. Call IoMmuInit() after locating gPeiUsbControllerPpiGuid.
2. Call XhcPeiFreeSched() to do cleanup in XhcEndOfPei.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
V2: Halt HC at EndOfPei.
Update the EhciPei driver to consume IOMMU_PPI to allocate DMA buffer.
If no IOMMU_PPI exists, this driver still calls PEI service to allocate
DMA buffer, with assumption that DRAM==DMA.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This feature makes use of paging mechanism to add a hidden (not present)
page just before and after the allocated memory block. If the code tries
to access memory outside of the allocated part, page fault exception will
be triggered.
This feature is controlled by three PCDs:
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPropertyMask
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPoolType
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPageType
BIT2 and BIT3 of PcdHeapGuardPropertyMask can be used to enable or disable
memory guard for SMM page and pool respectively. PcdHeapGuardPoolType and/or
PcdHeapGuardPageType are used to enable or disable guard for specific type
of memory. For example, we can turn on guard only for EfiRuntimeServicesCode
and EfiRuntimeServicesData by setting the PCD with value 0x60.
Pool memory is not ususally integer multiple of one page, and is more likely
less than a page. There's no way to monitor the overflow at both top and
bottom of pool memory. BIT7 of PcdHeapGuardPropertyMask is used to control
how to position the head of pool memory so that it's easier to catch memory
overflow in memory growing direction or in decreasing direction.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Heap guard makes use of paging mechanism to implement its functionality. But
there's no protocol or library available to change page attribute in SMM mode.
A new protocol gEdkiiSmmMemoryAttributeProtocolGuid is introduced to make it
happen. This protocol provide three interfaces
struct _EDKII_SMM_MEMORY_ATTRIBUTE_PROTOCOL {
EDKII_SMM_GET_MEMORY_ATTRIBUTES GetMemoryAttributes;
EDKII_SMM_SET_MEMORY_ATTRIBUTES SetMemoryAttributes;
EDKII_SMM_CLEAR_MEMORY_ATTRIBUTES ClearMemoryAttributes;
};
Since heap guard feature need to update page attributes. The page table
should not set to be read-only if heap guard feature is enabled for SMM
mode. Otherwise this feature cannot work.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
This feature makes use of paging mechanism to add a hidden (not present)
page just before and after the allocated memory block. If the code tries
to access memory outside of the allocated part, page fault exception will
be triggered.
This feature is controlled by three PCDs:
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPropertyMask
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPoolType
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPageType
BIT0 and BIT1 of PcdHeapGuardPropertyMask can be used to enable or disable
memory guard for page and pool respectively. PcdHeapGuardPoolType and/or
PcdHeapGuardPageType are used to enable or disable guard for specific type
of memory. For example, we can turn on guard only for EfiBootServicesData
and EfiRuntimeServicesData by setting the PCD with value 0x50.
Pool memory is not ususally integer multiple of one page, and is more likely
less than a page. There's no way to monitor the overflow at both top and
bottom of pool memory. BIT7 of PcdHeapGuardPropertyMask is used to control
how to position the head of pool memory so that it's easier to catch memory
overflow in memory growing direction or in decreasing direction.
Note1: Turning on heap guard, especially pool guard, will introduce too many
memory fragments. Windows 10 has a limitation in its boot loader, which
accepts at most 512 memory descriptors passed from BIOS. This will prevent
Windows 10 from booting if heap guard is enabled. The latest Linux
distribution with grub boot loader has no such issue. Normally it's not
recommended to enable this feature in production build of BIOS.
Note2: Don't enable this feature for NT32 emulation platform which doesn't
support paging.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Heap guard feature needs paging to work properly. 64-bit BIOS uses
PcdDxeIplBuildPageTables to control the page table setup. 32-bit BIOS
has to check heap guard feature to decide enabling paging or not.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Heap guard feature will frequently update page attributes. The debug message
in CpuDxe driver will slow down the boot performance noticeably. Changing the
debug level to DEBUG_VERBOSE to reduce the message output for normal debug
configuration.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
The new protocol gEdkiiSmmMemoryAttributeProtocolGuid is intended for
PiSmmCore to be able to change memory page attributes for the sake of
heap guard feature.
This protocol provides three interfaces to get/set/clear page attribute.
struct _EDKII_SMM_MEMORY_ATTRIBUTE_PROTOCOL {
EDKII_SMM_GET_MEMORY_ATTRIBUTES GetMemoryAttributes;
EDKII_SMM_SET_MEMORY_ATTRIBUTES SetMemoryAttributes;
EDKII_SMM_CLEAR_MEMORY_ATTRIBUTES ClearMemoryAttributes;
};
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Add definitions and strings for following new PCDs:
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPageType
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPoolType
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPropertyMask
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Now that the PL031 RTC driver library no longer depends on the ARM
platform specific ArmPlatformSysConfigLib, we no longer need to
implement ArmPlatform.h or have a resolution for that library.
This allows us to get rid of a rather dodgy practice of including
platform headers using compiler flags, which is a bad idea at various
levels.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The PL031 driver implements a VExpress/Juno specific hack to set the
battery backed clock in addition to the PL031. However, none of the
remaining VExpress based hardware we support in EDK2 actuall implements
this feature so we can just remove it, and get rid of the cumbersome
dependency on ArmPlatform.h.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Currently, each ARM platform built with RVCT that uses ArmHvcLib
or ArmSmcLib needs to specify a CPU target that implements both the
security and virtualization extensions, so that the assembler does
not choke on the 'hvc' and 'smc' instructions in ArmHvcLib/ArmSvcLib.
Let's move these overrides into the module .INFs so we can lift this
requirement at the platform side.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The VariableRuntimeDxe driver may use CopyMem () on NOR flash regions,
assuming such regions always have full memory semantics. Given that
those regions cannot be mapped as ordinary memory on ARM (due to the
fact that the NOR flash requires device semantics while in write mode)
this prevents us from using BaseMemoryLibOptDxe in VariableRuntimeDxe,
since it may use unaligned accesses and/or DC ZVA instructions, both
of which are incompatible with mappings using device semantics.
Note that there is no way we can work around this by changing the
mapping type between 'memory' and 'device' when switching from read to
write mode and back, because the runtime mapping is created by the OS,
and cannot be changed at will.
So let's just switch to the unaccelerated version of BaseMemoryLib which
does not have the same problem.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Shannon Zhao <zhaoshenglong@huawei.com>
This patch is to remove some redundant DEBUG output in SNP transmit function.
In case of return EFI_NOT_READY in PxeTransmit, the SNP driver is indicate
the caller that the transmit queue is full, it's a very common situation druing
transmit, not a critical error. So the patch move the DEBUG lever to EFI_D_NET.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
This patch is to fix a bug that the HttpTcpReceiveHeader() may return incorrect
SizeofHeaders, which will include some already received message-body.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Since UefiCpuPkg's CpuDxe Driver already adds Local Apic's MMIO space to
GCD, CorebootModulePkg's CbSupportDxe should not do this again. Doing this
again causes error return status from GCD service, and ASSERT (FALSE) with
debug build, so the duplicated addition is removed.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=779
For the API EfiShellOpenRootByHandle():
The return status of the call to SimpleFileSystem->OpenVolume should be
checked.
It is possible that there is a media change in the device (like CD/DVD
ROM). In such case, the volume root opened and/or the device path opened
previously (also within EfiShellOpenRootByHandle) may be invalid.
This commit adds a check for the result of OpenVolume before subsequently
calling functions like EfiShellGetMapFromDevicePath() &
ConvertEfiFileProtocolToShellHandle().
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=725
Historically many drives or medias do not correctly return their value
for block N - which is also referred as last addressable/recorded block.
When they do so, there is still a problem when relying on last recorded
block number returned by SCSI commands READ CAPACITY and READ TRACK
INFORMATION - that is, between block 0 and block N there may be
unwritten blocks which are located outside any track.
That said, the Partition driver was unable to find AVDP at block N on
certain medias that do not either return or report their last recorded
block number correctly.
Apparently there is no official or correct way to find the correct block
number, however tools like the Philips UDF Conformance Tool (udf_test)
apply a correction by searching for an AVDP or VAT in blocks N through
N-456 -- this can be observed by looking at the log reported by udf_test
on those CD/DVD medias. So, if the AVDP or VAT is found, then it sets
the last recorded block number to where AVDP or VAT was located.
With the below setence in UDF 2.60, 6.13.2.2 Background Physical
Formatting:
"... the second AVDP must be recorded after the Background physical
Formatting has been finished..."
Implies that the last recorded block is the one where second AVDP was
recorded.
This patch implements a similar way to correct the last recorded block
number by searching for last AVDP in blocks N-1 through N-512 on those
certain medias, as well as ensure a minimum number of 2 AVDPs found as
specified by ECMA 167 and UDF 2.60 specifications.
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reported-by: Hao Wu <hao.a.wu@intel.com>
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=766
Update logic to not return an error from UsbBootRequestSense()
if a Request Sense command responds with no sense information.
It is legal for a USB mass storage device to respond to a
Request Sense command with a SenseKey of
USB_BOOT_SENSE_NO_SENSE and an Additional Sense
Code of USB_BOOT_ASC_NO_ADDITIONAL_SENSE_INFORMATION.
This is described in Section 3.3 of the Universal Serial
Bus Mass Storage Specification For Bootability:
http://www.usb.org/developers/docs/devclass_docs/usb_msc_boot_1.0.pdf
The previous logic returned an error of EFI_NO_RESPONSE
and this caused USB mass storage devices such as a USB
floppy drive to not be detected.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
V2:
Fix MSFT C4255 warning
V1:
Enable MSFT C4255 warning.
From MSDN:
Compiler Warning (level 4) C4255
function' : no function prototype given: converting '()' to '(void)'
The compiler did not find an explicit list of arguments to a function.
This warning is for the C compiler only.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
V2:
Fix MSFT C4255 warning
V1:
Enable MSFT C4255 warning.
From MSDN:
Compiler Warning (level 4) C4255
function' : no function prototype given: converting '()' to '(void)'
The compiler did not find an explicit list of arguments to a function.
This warning is for the C compiler only.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V2:
Fix MSFT C4255 warning
V1:
Enable MSFT C4255 warning.
From MSDN:
Compiler Warning (level 4) C4255
function' : no function prototype given: converting '()' to '(void)'
The compiler did not find an explicit list of arguments to a function.
This warning is for the C compiler only.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V2:
Fix MSFT C4255 warning
V1:
Enable MSFT C4255 warning.
From MSDN:
Compiler Warning (level 4) C4255
function' : no function prototype given: converting '()' to '(void)'
The compiler did not find an explicit list of arguments to a function.
This warning is for the C compiler only.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V2:
Fix MSFT C4255 warning
V1:
Enable MSFT C4255 warning.
From MSDN:
Compiler Warning (level 4) C4255
function' : no function prototype given: converting '()' to '(void)'
The compiler did not find an explicit list of arguments to a function.
This warning is for the C compiler only.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The root cause is Module's self.CanSkip() is before LibraryAutoGen,
then when a uni file of library is changed, Module's self.CanSkip() is
still true which cause the library is not regenerated.
This patch change Module's self.CanSkip() after LibraryAutoGen.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=759
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=765
The UEFI Specification Boot Services chapter, StartImage() service,
EFF 1.10 Extension requires extra calls to ConnectController()
if a UEFI Driver produces handles. The DXE Core is performing these
extra calls to ConnectController() without evaluating the ImageType.
A filter is added to not make extra calls to ConnectController()
if the ImageType is EFI_IMAGE_SUBSYSTEM_EFI_APPLICATION.
Without this filter, extra calls to ConnectController() may be
performed by UEFI Applications or a UEFI Shell Applications that
also call ConnectController().
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=761
When a TerminalType is set to PCANSI, characters in the range 0x00
to 0x1F are control characters. The mapping table for PCANSI maps
TRIANGLE glyphs, ARROW_UP glyph, and ARROW_DOWN glyph into this
control character range and that causes no characters to be
displayed by PCANSI compatible terminal emulators.
The mappings are updated so these glyphs are mapped to ANSI
characters in the range 0x20 to 0x7E.
GEOMETRICSHAPE_UP_TRIANGLE '^'
GEOMETRICSHAPE_RIGHT_TRIANGLE '>'
GEOMETRICSHAPE_DOWN_TRIANGLE 'v'
GEOMETRICSHAPE_LEFT_TRIANGLE '<'
ARROW_UP '^'
ARROW_DOWN 'v'
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
TianoCore BZ#677
Remove unused variables and turn nsdispatch macro into a function. This
is not what is recommended in the bug ticket but avoid heavier
modification of the code (and deviation from upsteam).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thiebaud Weksteen <tweek@google.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
According to the UEFI spec, the timezone setting which the platform needs
to record in addition to the actual date and time already reflects the
current DST setting. In other words, moving the clock from standard time
to daylight saving time also involves adding or subtracting 60 minutes
from the timezone setting, as well as flicking the EFI_TIME_IN_DAYLIGHT
bit in the DST setting.
This means we need to disregard the DST setting if the timezone is
specified, and only add or subtract the additional hour if we are on
local time.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This library, which is intended to encapsulate the hardware specifics
of the ARM PL031 RTC, also implements its own input validation routines
and record the timezone and DST settings in its own set of EFI variables.
This functionality has recently been added to the core driver, so let's
remove it here.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
RealTimeClockRuntimeDxe defers the hardware/platform specific handling
of reading/setting the hardware clock to RealTimeClockLib, but for
unknown reasons, it also defers common functionality such as input
validation and recording the timezone and DST settings (which are
informational only and not managed by hardware)
This has led to a lot of duplication in implementations of RealTimeClockLib
as well as TimeBaseLib, to the point where each library implementation
has its own set of UEFI variables to record the timezone and DST settings.
This makes little sense, and so let's update RealTimeClockRuntimeDxe now
to allow future implementations to rely on the core driver to take care of
these things.
Note that reading the timezone and DST settings occurs before calling into
the library, so we can phase out this behavior gradually from library
implementations in EDK2, edk2-platforms or out of tree.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
V2 update: Directly use NetIp4IsUnicast() to check station address in IP driver.
This patch is to follow RFC3021 which allows to use 31-bit mask
in point-to-point link.
If a 31-bit subnet mask is assigned to a point-to-point link, it
leaves the <Host-number> with only 1 bit. Consequently, only two
possible addresses may result:
{<Network-number>, 0} and {<Network-number>, -1}
These addresses have historically been associated with network and
broadcast addresses (see Section 2.2). In a point-to-point link with
a 31-bit subnet mask, the two addresses above MUST be interpreted as
host addresses.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
This commit adds header files for the SPI protocols introduced in the
UEFI PI 1.6 specification, as well as their GUIDs to MdePkg.dec.
EFI_SPI_TRANSACTION_TYPE assumes an enum with its members ordered the
way they are listed in the specification, as there are no values given
explicitely.
EFI_LEGACY_SPI_CONTROLLER_GUID assumes the character 'l' used in the
specification was meant to be '1'.
V2:
- Fixed LegacySpiFlash.h's header guard.
- Fixed LegacySpiSmmController's GUID name.
- Removed EFI_SPI_NOR_FLASH_PROTOCOL_LF_READ_DATA as it's unused.
- Added the missing SpiSmmNorFlash header.
- Fixed all file endings to be CRLF.
- Removed trailing whitespaces.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
DEBUG builds of PEI code will print a diagnostic message regarding
the utilization of temporary RAM before switching to permanent RAM.
For example,
Total temporary memory: 16352 bytes.
temporary memory stack ever used: 4820 bytes.
temporary memory heap used for HobList: 4720 bytes.
Tracking stack utilization like this requires the stack to be seeded
with a known magic value, and this needs to occur before entering C
code, given that it uses the stack. Currently, only Nt32Pkg appears
to implement this feature, but it is useful nonetheless, so let's
wire it up for PrePeiCore.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
NVDIMM_LABEL protocol is defined in UEFI 2.7 spec, to provide
services that allow management of labels contained in a Label
Storage Area in NVDIMM.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BTT definitions are defined in UEFI spec 2.7, to defines
a layout and set of rules for doing block I/O that provide
powerfail write atomicity of a single block in NVDIMM.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://lists.01.org/pipermail/edk2-devel/2017-October/016479.html
reported "Xen Console input very slow in recent UEFI" that appears
after 4cf3f37c87 "MdeModulePkg
SerialDxe: Process timeout consistently in SerialRead".
Julien did more debugging and find out the following is happening in
TerminalConInTimerHandler (MdeModulePkg/Universal/Console/TerminalDxe)
when a character is received:
1) GetControl will return EFI_SERIAL_INPUT_BUFFER_EMPTY unset
=> Entering in the loop to fetch character from the serial
2) GetOneKeyFromSerial()
=> Return directly with the character read
3) Looping as the fifo is not full and no error
4) GetOneKeyFromSerial() -> SerialRead()
=> No more character so SerialPortPoll() will return FALSE and loop
until timeout
=> Return EFI_TIMEOUT
5) Exiting the loop from TerminalConInTimerHandler
6) Characters are printed
After some investigation, I found it is related to the Timeout value.
The Timeout is 1000000 (1s) by default to follow UEFI spec.
And the Terminal driver will recalculate and set the Timeout value
based on the properties of UART in TerminalDriverBindingStart()/
TerminalConInTimerHandler().
SerialInTimeOut = 0;
if (Mode->BaudRate != 0) {
//
// According to BAUD rate to calculate the timeout value.
//
SerialInTimeOut = (1 + Mode->DataBits + Mode->StopBits) *
2 * 1000000 / (UINTN) Mode->BaudRate;
}
For example, based on the PCD values of PcdUartDefaultBaudRate,
PcdUartDefaultDataBits and PcdUartDefaultStopBits, SerialInTimeOut =
(1 + 8 + 1) * 2 * 1000000 / (UINTN) 115200 = 173 (us).
When SerialDxe is used,
TerminalDriverBindingStart()/TerminalConInTimerHandler() ->
SerialIo->SetAttributes() ->
SerialSetAttributes() ->
SerialPortSetAttributes()
Some implementations of SerialPortSetAttributes() could handle the
input parameters and return RETURN_SUCCESS, for example
BaseSerialPortLib16550, then Timeout value will be changed to 173 (us),
no "slow down" will be observed.
But some implementations of SerialPortSetAttributes() just return
RETURN_UNSUPPORTED, for example XenConsoleSerialPortLib, then Timeout
value will be not changed and kept 1000000 (1s), "slow down" will be
observed.
SerialPortLib instance can be enhanced to
1. Handle the input parameters and return status accordingly instead of
just returning RETURN_UNSUPPORTED in SerialPortSetAttributes().
2. Just return RETURN_SUCCESS instead of RETURN_UNSUPPORTED in
SerialPortSetAttributes() if the instance does not care the input
parameters at all.
And SerialDxe can also be enhanced like this patch to be more robust
to handle Timeout change.
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Compare against the original parameters
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Julien Grall <julien.grall@linaro.org>
PcdSerialIoUartDebugEnable UPD is platform specific and should not
be included in generic GenCfgOpt.py script. Remove this and platform
DSC should control the default value instead.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
AllocateCopyPool(AllocationSize, *Buffer) will copy "AllocationSize" bytes of
memory from old "Buffer" to new allocated one. If "AllocationSize" is bigger
than size of "Buffer", heap memory overflow occurs during copy.
One solution is to allocate pool first then copy the necessary bytes to new
memory. Another is using ReallocatePool instead if old buffer will be freed
on spot.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bi Dandan <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Bi Dandan <dandan.bi@intel.com>
AllocateCopyPool(AllocationSize, *Buffer) will copy "AllocationSize" bytes of
memory from old "Buffer" to new allocated one. If "AllocationSize" is bigger
than size of "Buffer", heap memory overflow occurs during copy.
One solution is to allocate pool first then copy the necessary bytes to new
memory. Another is using ReallocatePool instead if old buffer will be freed
on spot.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Bi Dandan <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
AllocateCopyPool(AllocationSize, *Buffer) will copy "AllocationSize" bytes of
memory from old "Buffer" to new allocated one. If "AllocationSize" is bigger
than size of "Buffer", heap memory overflow occurs during copy.
One solution is to allocate pool first then copy the necessary bytes to new
memory. Another is using ReallocatePool instead if old buffer will be freed
on spot.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Bi Dandan <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Bi Dandan <dandan.bi@intel.com>
For PciIoPciRead interface, memory prior to Buffer would be written
with zeros if Offset was larger than sizeof (Dev->ConfigSpace), which
would cause serious system exception.
So we add a pre-check branch to avoid memory override.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
PCI_REG_PCIE_SLOT_CONTROL contains a typo. It is defined as:
typedef union {
struct {
UINT32 AttentionButtonPressed : 1;
UINT32 ...
...
} Bits;
UINT16 Uint16;
} PCI_REG_PCIE_SLOT_CONTROL;
The bit field data type should be UINT16 instead of UINT32,
results sizeof (PCI_REG_PCIE_SLOT_CONTROL) equals to 4 instead of 2.
Because this structure is used in PCI_CAPABILITY_PCIEXP as below:
typedef struct {
...
PCI_REG_PCIE_SLOT_CONTROL SlotControl;
PCI_REG_PCIE_SLOT_STATUS SlotStatus;
} PCI_CAPABILITY_PCIEXP;
It cause the OFFSET_OF (PCI_CAPABILITY_PCIEXP, SlotStatus) equal
to a wrong value.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=405
The original code enables some BITs in PCI attributes in Start(),
but wrongly to disable these BITs in Stop().
The correct behavior is to save the original PCI attributes before
enables some BITs in Start(), and restore to original value
in Stop().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The SPI NOR flash drivers which base on ArmPlatformPkg's
NorFlashDxe usually make use of static declarations of the
flash instances with their type and parameters. As a result
it implies hardcoding the exact way of flash handling, not to
mention the code does not look very nice. Much better solution
would be obtaining the flash ID and hence its description
in runtime.
JEDEC compliant SPI NOR devices allow to obtain their IDs with
READ_ID command (0x9f), which should return the vendor ID byte,
followed by 2 to 4 following device ID bytes. Use this capability
for implementing a NorFlashInfoLib that gives an access to the
NOR flash description data, such as name, page size, sector
(block) size and others, of more than 50 different models.
The new library user should pass an output array from issuing
READ_ID command to the NorFlashGetInfo () routine - if the
match is found, an allocated (optionally for RT) pool with
the flash description copy will be returned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The function Pkcs7GetSigners return certificate stack as binary buffer.
Use EFI_CERT_DATA to parsing certificate stack more clearly, and access
certificate by the field of EFI_CERT_DATA structure.
Cc: Long Qin <qin.long@intel.com>
Cc: Zhang Chao <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: chenc2 <chen.a.chen@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Zhang Chao <chao.b.zhang@intel.com>
The parameter CertStack of Pkcs7GetSigners will return all embedded X.509
certificate in one given PKCS7 signature. The format is:
//
// UINT8 CertNumber;
// UINT32 Cert1Length;
// UINT8 Cert1[];
// UINT32 Cert2Length;
// UINT8 Cert2[];
// ...
// UINT32 CertnLength;
// UINT8 Certn[];
//
Add EFI_CERT_STACK and EFI_CERT_DATA structure, these two C-structure are
used for parsing CertStack more clearly.
Cc: Long Qin <qin.long@intel.com>
Cc: Zhang Chao <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: chenc2 <chen.a.chen@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Zhang Chao <chao.b.zhang@intel.com>
Flash region needs to be set as cacheable (write back) to increase
performance, if PEI is still XIP on flash or DXE FV is decompressed
from flash FV. However some ARM platforms do not support to set flash
as inner shareable since flash is not normal DDR memory and it will
not respond to cache snoop request, which will causes system hang
after MMU is enabled.
So we need a new ARM memory region attribute WRITE_BACK_NONSHAREABLE
for flash region on these platforms specifically. This attribute will
set the region as write back but not inner shared.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Peicong Li <lipeicong@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The patch ensures all DMA transactions are blocked after
ExitBootService.
If a platform enables IOMMU before and needs disable IOMMU after
ExitBootService, the IOMMU should be disabled after PCI bus driver
disables BME.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Turner <michael.turner@microsoft.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jeff Fan <vanjeff_919@hotmail.com>
EfiCpuIoWidthUint8 should be used in HMemImageRead and HMemImageSave.
Because CpuIo protocol is now used for memory access.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
V3:
(1) Reset QuestionStoredInBitField to FALSE at end opcode(EFI_IFR_END_OP)
(2) Fix typo and format issues(line alignment for debug print message
and value assignment...)
V2:
(1)Remove the VarOffsetBitLevel/StorageWidthBitLevel to reduce the final
VarCheckBinSize and update the implementation accordingly.
(2)Update the VAR_CHECK_HII_REVISION
(3)Refine the Debug message and function comments,like update oneof",
"checkbox", "numeric" to "OneOf", "CheckBox", "Numeric".
VarCheckHiiLib check the value set to storage based on the possible value
listed in the vfr file. Since we have enhanced vfr to support Question
value stored in bit field, so now enhance VarCheckHiiLib to support bit
field check.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In patch 2, we will introduce DEBUG_INFO in VarCheckHiiLib,in order to keep
consistence, replace all EFI_D_INFO with DEBUG_INFO firstly in this pacth.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Currently, we complete a synchronous operation without unmapping the
DMA mappings, and free the pages using FreePages () rather than calling
EFI_PCI_IO_PROTOCOL::FreeBuffer. This is simply incorrect, but it also
breaks non-coherent DMA as well as DMA protection and/or memory encryption
so let's do it correctly and call SdMmcFreeTrb() instead.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The malloc/free (instead of AllocatePool/FreePool) were used directly
in some wrapper implementations, which was designed to leverage the
light-weight memory management routines at Runtime phase.
The malloc/free and AllocatePool/FreePool usages are required to be
matched, after extra memory size info header was introduced in malloc
wrapper.
This patch corrects two memory allocation cases, which requires the
caller to free the buffer with FreePool() outside the function call.
And some comments were also added to clarify the correct memory
release functions if it's the caller's responsibility to free the
memory buffer.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ting Ye <ting.ye@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
There is one long-standing problem in CRT realloc wrapper, which will
cause the obvious buffer overflow issue when re-allocating one bigger
memory block:
void *realloc (void *ptr, size_t size)
{
//
// BUG: hardcode OldSize == size! We have no any knowledge about
// memory size of original pointer ptr.
//
return ReallocatePool ((UINTN) size, (UINTN) size, ptr);
}
This patch introduces one extra header to record the memory buffer size
information when allocating memory block from malloc routine, and re-wrap
the realloc() and free() routines to remove this BUG.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ting Ye <ting.ye@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Validated-by: Jian J Wang <jian.j.wang@intel.com>
Use ACPI table event to get DMAR table instead of using ACPI SDT
notification as ACPI SDT is optional and the default value of
PcdInstallAcpiSdtProtocol is FALSE in MdeModulePkg.dec.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The current interdepencies between the PrePeiCore SEC module, the
platform PEIM and ArmPlatformLib is a bit awkward: due to the fact
that ArmPlatformLib is also used by SEC modules, we cannot use PEI
specific facilities in the implementation of ArmPlatformGetBootMode.
However, given that we call that library function /after/ invoking
PlatformPeiLib, there is no way for that library to set the boot mode
other than resorting to tricks like notification callbacks on arbitrary
unrelated events.
ArmPlatformLib should probably be phased out anyway, given its quirky
nature, but for now, let's fix this particular issue by deferring the
call to PlatformPeim() to after the point where we set the boot mode
by calling ArmPlatformGetBootMode ().
While we're at it, clean up the code slightly by using PeiServicesLib
instead of doing double pointer dereferencing.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Introduce a PPI counterpart of the existing 'embedded GPIO' protocol,
so we can manipulate GPIOs from PEI modules. This allows things like
setting the boot mode based on a DIP switch setting.
Note that the naming is slightly awkward, as there is nothing 'embedded'
about a GPIO, but given that the DXE protocol already resides here and
has the 'embedded' prefix, it makes sense to retain uniformity.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Add support to parse map file generated by Xcode on Mac to get
variable offset and Patchable Pcd info in current EFI file.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Question value are stored in one specified storage, but the Data type
of the storage is not specified or there is no sub fields in the Data
type sometimes, so we need to add check before using related pointers.
Here list some NULL cases:
(1)For an efivastore which doesn't specify a data structure or a
data type(UINT8,UINT16...)as the storage, just has VarName and
VarSize instead, we can not get its data type before parsing
its VarSize.
(2)For efivastore which just specifies the data type(UINT8,UINT16...)
not a structure as the storage,this data type doesn't have sub-fields.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The original code uses PciRootBridgeIo for memory access.
It worked before MdeModulePkg/PciHostBridgeDxe driver was checked in.
But MdeModulePkg/PciHostBridgeDxe adds checks to ensure the MMIO
access request is in the scope of the current RootBridgeIo instance.
It causes "hexeditor -m 0 2" reports error because memory address 0
surely is not in the scope of any RootBridgeIo instance.
In fact only accessing the MMIO space occupied by the RootBridgeIo
can work.
The patch changes hexeditor to use CpuIo for memory access.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Commit 1894a7c64c ("BaseTools/tools_def AARCH64 ARM: disable PIE
linking") works around an issue that was caught due to the fact that
PIE linking produces broken .acpi files. However, v2 of that fix
inadvertently only applied the workaround to the normal linker command
line, and not to the ASLD one, so the issue still persists.
So add the missing -no-pie options for ASLD on ARM and AARCH64.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Mark EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS as deprecated.
1. Make SetVariable/QueryVariableInfo return EFI_UNSUPPORTED with this
attribute
2. No change to GetVariable/GetNextVariableName
Also update several function descriptors accordingly
Cc: Long Qin <qin.long@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Mark EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS as deprecated. Also update
some function descriptors accordingly.
Cc: Long Qin <qin.long@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Remove counter based auth variable support. also modify several function
descriptors to accommodate the change
Cc: Long Qin <qin.long@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
It's a regression of below commit:
SHA-1: 8be37a5cee
* MdeModulePkg/SecurityStubDxe: Defer 3rd party image before EndOfDxe
When PciBus driver fails to load the Option ROM, it doesn't produce
BusOverride protocol. It was a correct behavior before the above
commit. But due to the above commit, BusOverride protocol never is
produced by PciBus driver.
The patch fixes this issue using the following solution:
1. PciBus records the image device path when LoadImage fails.
2. Override.GetDriver() tries to look for the image handle using
the stored image device path.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The patch shouldn't impact functionality.
Original code records the ImageHandle of Option ROM by creating a
new entry. It's not necessary.
The patch updates the ImageHandle in the old entry.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The patch doesn't impact real functionality.
It only renames EFI_PCI_ROM_IMAGE_MAPPING to PCI_ROM_IMAGE,
and changes prototype of PciRomAddImageMapping so that
no explicit type cast is needed when calling this function.
It also removes unused field RomBase from PCI_IO_DEVICE structure.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Before memory is ready, this sample produces one VTd engine.
After memory and silicon is initialized, this sample produces
both IGD VTd engine and all-rest VTd engine by reinstall the
FV_INFO_PPI.
This update is to demonstrate how to support pre-mem VTd usage.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Remove memory discovered dependency to support both premem
VTD_INFO_PPI and postmem VTD_INFO_PPI.
If VTD_INFO_PPI is installed before memory is ready, this
driver protects all memory region.
If VTD_INFO_PPI is installed or reinstalled after memory
is ready, this driver allocates DMA buffer and protect rest.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Since the exception list is not a recommended way, we returns
EFI_UNSUPPORTED in the sample code.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Change ExitBootServices TPL to CALLBACK, so that a device
can disable BME before IOMMU grants access right.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Clearing I/O port decoding in the PCI command register at
ExitBootServices() breaks IDE boot in Windows, on QEMU's "pc" (i440fx)
machine type. (AHCI boot on "q35" is unaffected.) Windows seems repeatedly
stuck, apparently waiting for a timeout of sorts.
This is arguably a Windows bug; a native OS driver should not expect the
firmware to leave the PCI command register in any particular state.
Strictly speaking, we only need to disable BM-DMA at ExitBootServices(),
in order to abort pending transfers to/from RAM, which is soon to be owned
by the OS. BM-DMA is also the only bit that's explicitly named by the UEFI
Driver Writers' Guide, for clearing at ExitBootServices().
I've verified that clearing only BM-DMA fixes the issue (boot time) on
i440fx, and does not regress q35/AHCI.
Cc: Aleksei Kovura <alex3kov@zoho.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Dann Frazier <dannf@ubuntu.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reported-by: Aleksei Kovura <alex3kov@zoho.com>
Reported-by: Dann Frazier <dannf@ubuntu.com>
Reported-by: https://launchpad.net/~cjkrupp
Bisected-by: Dann Frazier <dannf@ubuntu.com>
Bisected-by: https://launchpad.net/~cjkrupp
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Star Zeng <star.zeng@intel.com>
Ref: https://bugs.launchpad.net/ubuntu/+source/edk2/+bug/1725560
Fixes: 6fb8ddd36b
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: dann frazier <dann.frazier@canonical.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Tested-by: Aleksei Kovura <alex3kov@zoho.com>
The ATA pass through read should use PCI IO bus master write operation
and ATA pass through write should use PCI IO bus master read operation
as the read and write operations are executed from the bus master's
point of view.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Daniil Egranov <daniil.egranov@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The standard GCC preprocessor we use to preprocess device tree source
files has a whole bunch of macros predefined, among which
#define __linux 1
#define __linux__ 1
#define __gnu_linux__ 1
#define linux 1
This causes a property like 'linux,code' to be converted into '1,code'
which is obviously wrong. So let's get rid of all the predefined macros
by passing -undef to the preprocessor command line.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Some prebuilt GCC toolchains targeting aarch64 (e.g., the Debian Stretch
one) will default to building PIE executables. This has been observed to
corrupt ACPI tables built from .aslc sources, so disable PIE linking
altogether when using the GCC toolchain to build for AARCH64 or ARM.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
For some special platforms (such as Ovmf), it is possible
that, some APs start up *and finish* before the remaining
APs start up *at all*. In this case, the enhance
solution by changes 0594ec41 not works as expected.
This change remove check CpuMpData->CpuCount logic to let old
solution still workable if platform owner still set a long
time for PcdCpuApInitTimeOutInMicroSeconds. It's platform
owner's response to decide which solution to use.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jeff Fan <vanjeff_919@hotmail.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
In current implementation, CPU initialized can be done in PEI
or DXE phase. PEI uses CpuFeaturesPei and Dxe uses CpuFeaturesDxe.
If CPU initialized in PEI phase, CpuFeaturesDxe driver will
not be used. This driver will install gEdkiiCpuFeaturesInitDoneGuid
protocol after it initializes the CPU.
Some drivers depend on this protocol to dispatch themselves. If
CpuFeaturesDxe not been used, these drivers will not be dispatched.
This patch fix the above issue. If Cpu initialized in PEI
phase, it also report a guid HOB for CpuFeaturesDxe.
CpuFeaturesDxe will check this HOB first. If it found this
HOB, it just install gEdkiiCpuFeaturesInitDoneGuid protocol,
else it will also do the CPU initialization.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
UefiCpuPkg hosts a number of modules (SMM infrastructure,
MP-initialization) that may behave differently enough between
virtualization guests and physical boards that they merit regression
testing and review specifically from a virtualization perspective.
Add Laszlo as a UefiCpuPkg reviewer (not maintainer) so that he be CC'd on
all UefiCpuPkg patches.
> R: Package Reviewer: Cc address for patches and questions. Reviewers
> help maintainers review code, but don't have push access.
Cc: Andrew Fish <afish@apple.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jeff Fan <vanjeff_919@hotmail.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
According to definition (Acpi.h and MdePkg.dec),
gEfiAcpiTableGuid = gEfiAcpi20TableGuid, and the code is trying
to parse ACPI 2.0 first and then ACPI 1.0, but it uses
gEfiAcpiTableGuid wrongly for ACPI 1.0, this patch is to fix it.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
According the UEFI spec 2.7 A:
In section 28.3.2 for the IpConfigData.UseDefaultAddress, "While set to
TRUE, Configure() will trigger the EFI_IP4_CONFIG2_PROTOCOL to retrieve
the default IPv4 address if it is not available yet."
In section 28.5 for the Ip4Config2PolicyDhcp, "...All of these configurations
are retrieved from DHCP server or other auto-configuration mechanism."
This patch is to align with the above description. When the default IPv4
address is not available and IpConfigData.UseDefaultAddress is set to TRUE,
Ip4Config2 protocol will be called to retrieve the default address by setting
the policy to Ip4Config2PolicyDhcp.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The existing attempt should not trigger the DHCP process if it
doesn't associates with the current NIC. That's incorrect when
displaying the initiator info in attempt page.
Cc: Karunakar P <karunakarp@amiindia.co.in>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Karunakar p <karunakarp@amiindia.co.in>
The original code as below intend to set the character
before last column to CHAR_NULL.
Line[(LastCol % (ARRAY_SIZE (Line) - 1)) - 1] = CHAR_NULL;
But when LastCol % (ARRAY_SIZE (Line) - 1)) equals to 0,
Line[-1] is modified.
We should change to code as below:
Line[(LastCol - 1) % (ARRAY_SIZE (Line) - 1)] = CHAR_NULL;
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
VariableRuntimeDxe deletes and locks the MorLock variable in
MorLockInit(), with the argument that any protection provided by MorLock
can be circumvented if MorLock can be overwritten by unprivileged code
(i.e., outside of SMM).
Extend the argument and the logic to the MOR variable, which is supposed
to be protected by MorLock. Pass Attributes=0 when deleting MorLock and
MOR both.
This change was suggested by Star; it is inspired by earlier VariableSmm
commit fda8f631ed ("MdeModulePkg/Variable/RuntimeDxe: delete and lock
OS-created MOR variable", 2017-10-03).
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Suggested-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Current logic always waiting for a specific value to collect all APs
count. This logic may caused some platforms cost too much time to
wait for time out.
This patch add new logic to collect APs count. It adds new variable
NumApsExecuting to detect whether all APs have finished initialization.
Each AP let NumApsExecuting++ when begin to initialize itself and let
NumApsExecuting-- when it finish the initialization. BSP base on whether
NumApsExecuting == 0 to finished the collect AP process.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Original AP index variable name not well express the meaning
of the variable. Also this name is better used in later patch.
So change the variable name for better understanding.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
clang-analyzer noticed this:
Pk/CryptPkcs7Verify.c:600:5: warning: Value stored to 'OldSize' is never read
OldSize = BufferSize;
^ ~~~~~~~~~~
Pk/CryptPkcs7Verify.c:644:5: warning: Value stored to 'OldSize' is never read
OldSize = BufferSize;
^ ~~~~~~~~~~
2 warnings generated.
These are each immediately followed by a loop that initializes them (to
the same values) a second time, and are otherwise only referenced inside
that loop, so there's just no point to these assignments at all.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Peter Jones <pjones@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Issue :
When storage media is full, tftp was resulting in ASSERT
MdeModulePkg/Core/Dxe/Mem/Page.c, because number of pages
was zero.
Reason:
While doing tftp, function call ShellWriteFile was modifying
FileSize variable. In case of full disk it was coming out to be
Zero.
Fix:
Storage the original filesize in local variable, and use this
variable while freeing the pages.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Udit Kumar <udit.kumar@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Make the comments follow Edk2 coding style:
1. Make the comments starts with /** and end with **/.
2. Make the comments descrition end with '.'
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Linux on ARM/arm64 will infer from the presence of a /chosen/stdout-path
DT property or of a SPCR ACPI table that the primary console is the serial
port, even if a graphical console is available as well.
So let's introduce a driver that allows the user to set a preference
between graphical and serial if both are available. If the preference
is set to 'Graphical', and any GOP protocol instances have been installed
by the time the ReadyToBoot event is signalled, remove the DT property
and/or the SPCR table entirely.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The bug was caused by 728d74973c
"MdeModulePkg/PciBus: Count multiple hotplug resource paddings".
The patch firstly updated the Bridge->Alignment to the maximum
alignment of all devices under the bridge, then aligned the
Bridge->Length to Bridge->Alignment.
It caused too much resources were claimed.
The new patch firstly aligns Bridge->Length to Bridge->Alignment,
then updates the Bridge->Alignment to the maximum alignment of all
devices under the bridge.
Because the step to update the Bridge->Alignment is to make sure
the resource allocated to the bus under the Bridge meets all
devices alignment. But the Bridge->Length doesn't have to align
to the maximum alignment.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
ClearMasks and OrMasks are not 8-byte aligned.
But SetMem64 requires the input address is 8-byte aligned.
If the input is not 8-byte aligned, assertion is hit.
Use SetMem instead.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
EditorClearLine() assumes the console max column is less than 200.
When the max column is bigger than 200, the code incorrectly
modifies the content out side of Line buffer.
It may cause system hang or reset.
The patch changes the function to print several times when
the max column is bigger than 200.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Edk2 has duplicated ping6/ifconfig6 implementation in NetworkPkg and ShellPkg.
The usage and parameter format of these 2 versions are exactly same. These two
commands have been added to Shell specification so the copy under
ShellPkg\Library\UefiShellNetwork2CommandsLib\
will be actively maintained in future.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Existing logic to parse the flags isn't complete and cannot detect
some invalid combinations of flags.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Existing code forgot to set Descriptor->SpecificFlag to 0 when
the resource type is non-prefetchable MMIO.
The patch adds the missing assignment.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
MtrrLibSetBelow1MBMemoryAttribute() may be called multiple times.
It's possible that in a 2nd call, Modified[0] is set to TRUE in
1st call but ClearMasks[0] and OrMasks[0] is uninitialized in
2nd call. It causes FixedSettings->Mtrr[0] be set to random
data.
The patch fixes this issue by introducing a local Modified[]
array and only updates FixedSettings->Mtrr[] when LocalModified[i]
is TRUE.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
MicrocodeDetect function will run by every threads, and it will
use PcdGet to get PcdCpuMicrocodePatchAddress and
PcdCpuMicrocodePatchRegionSize, if change both PCD default to dynamic,
system will in non-deterministic behavior.
By design, UEFI/PI services are single threaded and not re-entrant
so Multi processor code should not use UEFI/PI services. Here, Pcd
protocol/PPI is used to access dynamic PCDs so it would result in
non-deterministic behavior.
This code get PCD value in BSP and save them in CPU_MP_DATA for Ap.
https://bugzilla.tianocore.org/show_bug.cgi?id=726
Cc: Crystal Lee <CrystalLee@ami.com.tw>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Add check to avoid NULL ptr dereference. The function HiiGetString
will return NULL pointer when the platform does not install the
appropriate string or call HiiGetString fail.(For example, HII not
support specified language.)
Cc: Zhang Chao <chao.b.zhang@intel.com>
Cc: Wu Hao <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: chenc2 <chen.a.chen@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Wu Hao <hao.a.wu@intel.com>
I missed the following, both while reviewing and while testing commit
6041ac65ae ("OvmfPkg/PlatformPei: DENY_EXECUTE_ON_SECURITY_VIOLATION
when SEV is active", 2017-10-05):
If "-D SECURE_BOOT_ENABLE" is not passed on the "build" command line, then
OVMF has no dynamic default at all for
"PcdOptionRomImageVerificationPolicy". This means that the PcdSet32S()
call added in the subject commit doesn't even compile:
> OvmfPkg/PlatformPei/AmdSev.c: In function 'AmdSevInitialize':
> OvmfPkg/PlatformPei/AmdSev.c:67:3: error: implicit declaration of
> function '_PCD_SET_MODE_32_S_PcdOptionRomImageVerificationPolicy'
> [-Werror=implicit-function-declaration]
> PcdStatus = PcdSet32S (PcdOptionRomImageVerificationPolicy, 0x4);
> ^
> cc1: all warnings being treated as errors
Make the current, SB-only, 0x00 dynamic default unconditional.
This is the simplest approach, and it reflects the intent of original
commit 1fea9ddb4e ("OvmfPkg: execute option ROM images regardless of
Secure Boot", 2016-01-07). Without SECURE_BOOT_ENABLE,
"SecurityPkg/Library/DxeImageVerificationLib" is not used anyway, so the
PCD is never read.
This issue was first caught and reported by Gerd Hoffmann
<kraxel@redhat.com>'s Jenkins CI. Later it was also reported in
<https://bugzilla.tianocore.org/show_bug.cgi?id=737>.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: 6041ac65ae
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: trim commit message as suggested by Jordan]
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
[lersek@redhat.com: add reference to TianoCore BZ#737]
Add the comments to address security problems in the Pkcs7Verify Protocol
per UEFI 2.7 updates.
The Pkcs7Verifier function VerifySignature() has problematic use cases
where it might be used to unwittingly bypass security checks. The specific
problem is that if the supplied hash is a different algorithm from the
blacklist hash, the hash will be approved even if it should have been
denied. The added comments place a strong warning about the problem.
It is possible to use the protocol reliably, either by agreeing a hash to
use for all time (like sha256) or by looping over all supported hashes when
using the protocol.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
The BuildEnv utility is sourced (executed by the user's interactive shell)
when the user sets up the build session. Some users like to set -C
(noclobber) for some additional safety in their shells, which trips up
BuildEnv. Update the redirection operator so that it overrides noclobber.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Commit 53c6ff1803 ("SecurityPkg:AuthVariableLib:Implement ECR1707 for
Private Auth Variable", 2017-09-12) introduced the following build
failure under several GCC toolchain versions:
> SecurityPkg/Library/AuthVariableLib/AuthService.c: In function
> 'CalculatePrivAuthVarSignChainSHA256Digest':
> SecurityPkg/Library/AuthVariableLib/AuthService.c:1567:58: error:
> pointer targets in passing argument 3 of 'X509GetCommonName' differ in
> signedness [-Werror=pointer-sign]
> Status = X509GetCommonName(SignerCert, SignerCertSize, CertCommonName, &CertCommonNameSize);
> ^~~~~~~~~~~~~~
> In file included from
> SecurityPkg/Library/AuthVariableLib/AuthServiceInternal.h:34:0,
> from
> SecurityPkg/Library/AuthVariableLib/AuthService.c:32:
> CryptoPkg/Include/Library/BaseCryptLib.h:2202:1: note: expected 'CHAR8 *
> {aka char *}' but argument is of type 'UINT8 * {aka unsigned char *}'
> X509GetCommonName (
> ^~~~~~~~~~~~~~~~~
> cc1: all warnings being treated as errors
Fix it by changing the type of "CertCommonName" to array-of-CHAR8.
Locations where "CertCommonName" is used in the
CalculatePrivAuthVarSignChainSHA256Digest() function:
- it is taken the size of -- not impacted by this patch;
- passed to X509GetCommonName() as an argument -- the patch fixes the
build error;
- passed to Sha256Update() as argument for "IN CONST VOID *Data" -- not
impacted by the patch;
- passed to AsciiStrLen() as argument -- drop the now-superfluous explicit
cast.
Since we are touching the Sha256Update() function call, fix the coding
style too:
- the line is overlong, so break each argument to its own line;
- insert a space between "AsciiStrLen" and the opening paren "(".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Gary Lin <glin@suse.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Long Qin <qin.long@intel.com>
Reported-by: Gary Lin <glin@suse.com>
Suggested-by: Gary Lin <glin@suse.com>
Suggested-by: Long Qin <qin.long@intel.com>
Fixes: 53c6ff1803
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The following commit:
1fea9ddb4e OvmfPkg: execute option ROM images regardless of Secure Boot
sets the OptionRomImageVerificationPolicy to ALWAYS_EXECUTE the expansion
ROMs attached to the emulated PCI devices. A expansion ROM constitute
another channel through which a cloud provider (i.e hypervisor) can
inject a code in guest boot flow to compromise it.
When SEV is enabled, the bios code has been verified by the guest owner
via the SEV guest launch sequence before its executed. When secure boot,
is enabled, lets make sure that we do not allow guest bios to execute a
code which is not signed by the guest owner.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=728
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
By default the image verification policy for option ROM images is 0x4
(DENY_EXECUTE_ON_SECURITY_VIOLATION) but the following OvmfPkg commit:
1fea9ddb4e OvmfPkg: execute option ROM images regardless of Secure Boot
set it to 0x0 (ALWAYS_EXECUTE). This is fine because typically option
ROMs comes from host-side and most of the time cloud provider (i.e
hypervisor) have full access over a guest anyway. But when secure boot
is enabled, we would like to deny the execution of option ROM when
SEV is active. Having dynamic Pcd will give us flexibility to set the
security policy at the runtime.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=728
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
The change doesn't impact the functionality.
To avoid magic code is helpful for maintaining the codes.
Use stack variable for known max length variable is more
clear and safe than heap buffer.
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Cc: Wu Hao A <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: chenc2 <chen.a.chen@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
According to UEFI spec, for the ExtractConfig function in
EFI_HII_CONFIG_ACCESS_PROTOCOL,If a NULL is passed in for the Request
field or if a ConfigHdr is passed in with no request elements, all of
the settings being abstracted by this function will be returned in the
Results field.
The implementation of ExtractConfig function in OpalHii.c misses to
handle above cases.This patch is to do the enhancements.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
ARRAY_SIZE(Mtrrs->Variables.Mtrr) was used in
MtrrDebugPrintAllMtrrsWorker() to parse the MTRR registers.
Instead, the actual variable MTRR count should be used.
Otherwise, the uninitialized random data in MtrrSetting may cause
MtrrLibSetMemoryType() hang.
Steven Shi found this bug in QEMU when using Q35 chip.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Steven Shi <steven.shi@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Some developers/QAs complain the color of directory or executable
files is hard to see and suggest to use a more bright color.
I agree with this suggestion so make this patch.
The look and feel is much better now.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The bug is for build output files it still use mws.join function, it
cause maybe we will get the build output files in the PACKAGES_PATH
because mws.join will try WORKSPACE first, if the file doesn't exist
then try PACKAGES_PATH. But for build output, we expected it should
relative to WORKSPACE.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The patch optimized the MTRR access code to skip the Base MSR
access when the Mask MSR indicates the pair is invalid.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
The new algorithm converts the problem calculating optimal
MTRR settings (using least MTRR registers) to the problem finding
the shortest path in a graph.
The memory required in extreme but rare case can be up to 256KB,
so using local stack buffer is impossible considering current
DxeIpl only allocates 128KB stack.
The patch changes existing MtrrSetMemoryAttributeInMtrrSettings() and
MtrrSetMemoryAttribute() to use the 4-page stack buffer for
calculation. The two APIs return BUFFER_TOO_SMALL when the buffer
is too small for calculation.
The patch adds a new API MtrrSetMemoryAttribute*s*InMtrrSettings() to
set multiple-range attributes in one function call.
Since every call to MtrrSetMemoryAttributeInMtrrSettings (without-s)
or MtrrSetMemoryAttribute() requires to calculate the MTRRs for the
whole physical memory, combining multiple calls in one API can
significantly reduce the calculation time.
In theory, if N times of call to without-s API costs N seconds,
the new API only costs 1 second.
The new API uses the buffer supplied from caller to calculate
MTRRs and returns BUFFER_TOO_SMALL when the buffer is too small for
calculation.
Test performed:
1. Random test
a. Generate random memory settings, use the new algorithm to
calculate the MTRRs.
b. Read back the MTRRs and check the memory settings match
the desired memory settings.
c. Repeat the above #1 and #2 100000 times.
2. OVMF 32PEI + 64DXE boot to shell.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The patch changes MtrrLibLeastAlignment() to
MtrrLibBiggestAlignment() and optimizes the implementation
to be more efficient.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In enter SMI, APIC timer may be initialized. After exit SMI, APIC timer
will be restore.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This is the regression issue. After apply CalculateCrc32(), the parameter
check is missing.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Wu Hao A <hao.a.wu@intel.com>
Issue : We were setting MediaPresent as TRUE (default) and
not checking return status of NetLibDetectMedia().
NetLibDetectMedia() sets MediaPresent FLAG in case of success
only and dont change flag on error.
So, Media State will display as 'Media Present', in case of
error also.
Fix : Check return value of NetLibDetectMedia(), if error then
print "Media State Unknown"
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Current code assume Communicate Ppi always existed, so it adds
ASSERT to confirm it. Ovmf platform happened not has this Ppi, so
the ASSERT been trig. This patch handle Ppi not existed case.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Install EdkiiSmmEndOfS3ResumeProtocol when S3 resume finished.
S3ResumePei will send S3 resume finished event to SmmCore through
communication buffer.
V2 change:
None.
V3 change:
1. Uninstall the protocol right after install it to avoid run out of memory.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Driver will send S3 resume finished event to SmmCore through communicate
buffer after it signals EndOfPei event.
V2 Changes:
1. Change structures name to avoid they start with EFI_.
2. Base on DXE phase bits to provide communication buffer, current implement
check both PEI and DXE phase.
V3 Changes:
1. Change structure name for better understanding.
2. Enhance communication buffer calculate logic to more accurate.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Current implementation skips to check whether the last four
characters are digits when the OptionNumber is NULL.
Even worse, it may incorrectly return FALSE when OptionNumber is
NULL.
The patch fixes it to always check the variable name even
OptionNumber is NULL.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
BmCharToUint() could be called using external data and it
already contains logic to return -1 when data is invalid,
so removing unnecessary assertion to avoid system hang.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
QemuVideoDxe driver will link VBE SHIM into page 0. If NULL pointer
detection is enabled, this driver will fail to load. NULL pointer detection
bypassing code is added to prevent such problem during boot.
Please note that Windows 7 will try to access VBE SHIM during boot if it's
installed, and then cause boot failure. This can be fixed by setting BIT7
of PcdNullPointerDetectionPropertyMask to disable NULL pointer detection
after EndOfDxe. As far as we know, there's no other OSs has such issue.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ayellet Wolman <ayellet.wolman@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
One of issue caused by enabling NULL pointer detection is that some PCI
device OptionROM, binary drivers and binary OS boot loaders may have NULL
pointer access bugs, which will prevent BIOS from booting and is almost
impossible to fix. BIT7 of PCD PcdNullPointerDetectionPropertyMask is used
as a workaround to indicate BIOS to disable NULL pointer detection right
after event gEfiEndOfDxeEventGroupGuid, and then let boot continue.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ayellet Wolman <ayellet.wolman@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
NULL pointer detection is done by making use of paging mechanism of CPU.
During page table setup, if enabled, the first 4-K page (0-4095) will be
marked as NOT PRESENT. Any code which unintentionally access memory between
0-4095 will trigger a Page Fault exception which warns users that there's
potential illegal code in BIOS.
This also means that legacy code which has to access memory between 0-4095
should be cautious to temporarily disable this feature before the access
and re-enable it afterwards; or disalbe this feature at all.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ayellet Wolman <ayellet.wolman@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
PCD PcdNullPointerDetectionPropertyMask is a bitmask used to control the
NULL address detection functionality in code for different phases.
If enabled, accessing NULL address in UEFI or SMM code can be caught
as a page fault exception.
BIT0 - Enable NULL pointer detection for UEFI.
BIT1 - Enable NULL pointer detection for SMM.
BIT2..6 - Reserved for future uses.
BIT7 - Disable NULL pointer detection just after EndOfDxe. This is a
workaround for those unsolvable NULL access issues in
OptionROM, boot loader, etc. It can also help to avoid
unnecessary exception caused by legacy memory (0-4095) access
after EndOfDxe, such as Windows 7 boot on Qemu.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ayellet Wolman <ayellet.wolman@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
current in FDF spec 3.6 [FV] section it use "FV_EXT_ENTRY_TYPE" as
Keyword for <ExtendedFvEntry>, while in the code it use "FV_EXT_ENTRY".
To keep compatibility, this patch support both keyword in the code
first.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
current the PCD value in DSC file may be override by FDF file, then it
cause the 'DSC DEFAULT' in build report wrongly display the FDF value
but not the DSC file's value.
This patch add a attribute DscDefaultValue for PcdClassObject to save
the actual DSC file's PCD value and use this value to display for 'DSC
DEFAULT'.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This commit adds support for storing initial timer value
logged at the beginning of firmware image execution.
This timer value is required for firmware basic boot performance
data record referenced by Firmware Performance Data Table (FPDT).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Alexei Fedorov <Alxei.Fedorov@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
FV3 HOB was introduced by new (>= 1.5) PI spec, it is intended to
be used to propagate PEI-phase FV authentication status to DXE.
This patch is to update FwVolDxe to get the authentication status
propagated from PEI-phase to DXE by FV3 HOB when producing FV
protocol.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
FV3 HOB was introduced by new (>= 1.5) PI spec, it is intended to
be used to propagate PEI-phase FV authentication status to DXE.
This patch is to update PeiCore to build FV3 HOB with the
authentication status and DxeCore to get the authentication
status from FV3 HOB when producing FVB Protocol.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add BuildFv3Hob API in HobLib.h and implement the API
in HobLib instances PeiHobLib, DxeHobLib and DxeCoreHobLib.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
CalculateCrc32() bases on the initialized mCrcTable. When CalculateCrc32()
is used, mCrcTable will take 1KB size in the image. When CalculateCrc32()
is not used, mCrcTable will not be built in the image, and no size impact.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
According to the TCG Platform Reset Attack Mitigation Specification (May
15, 2008):
> 5 Interface for UEFI
> 5.1 UEFI Variable
> 5.1.1 The MemoryOverwriteRequestControl
>
> Start of informative comment:
>
> [...] The OS loader should not create the variable. Rather, the firmware
> is required to create it and must support the semantics described here.
>
> End of informative comment.
However, some OS kernels create the MOR variable even if the platform
firmware does not support it (see one Bugzilla reference below). This OS
issue breaks the logic added in the last patch.
Strengthen the MOR check by searching for the TCG or TCG2 protocols, as
edk2's implementation of MOR depends on (one of) those protocols.
The protocols are defined under MdePkg, thus there's no inter-package
dependency issue. In addition, calling UEFI services in
MorLockInitAtEndOfDxe() is safe, due to the following order of events /
actions:
- platform BDS signals the EndOfDxe event group,
- the SMM core installs the SmmEndOfDxe protocol,
- MorLockInitAtEndOfDxe() is invoked, and it calls UEFI services,
- some time later, platform BDS installs the DxeSmmReadyToLock protocol,
- SMM / SMRAM is locked down and UEFI services become unavailable to SMM
drivers.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ladi Prosek <lprosek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1498159
Suggested-by: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
The SetMorLockVariable() function sets "mMorLockPassThru" to TRUE
temporarily, so that it can set the MOR Control Lock variable to
well-formed values without permission checks.
In the next patch, we'll need the same override for deleting the MOR
Control Lock variable; hence obey "mMorLockPassThru" in the deletion
branch of SetVariableCheckHandlerMorLock() as well.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ladi Prosek <lprosek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
Introduce the MorLockInitAtEndOfDxe() hook, in order to allow
MorLockInit() to delay / queue operations until EndOfDxe. (Or, if the
platform never signals EndOfDxe, until ReadyToBoot.)
Call MorLockInitAtEndOfDxe() whenever we set "mEndOfDxe" to TRUE:
- in VariableRuntimeDxe:
- in the OnReadyToBoot() function,
- in the OnEndOfDxe() function;
- in VariableSmm:
- on the SMM_VARIABLE_FUNCTION_READY_TO_BOOT SMI request,
- in the SmmEndOfDxeCallback() function.
For now, implement MorLockInitAtEndOfDxe() as a no-op in both
VariableRuntimeDxe and VariableSmm.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ladi Prosek <lprosek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
The MorLockInit() and SetVariableCheckHandlerMor() functions have separate
implementations for VariableRuntimeDxe (= unprivileged, unified
DXE_RUNTIME driver) and VariableSmm (= privileged, DXE_SMM back-end of the
split variable driver).
Move their declarations from "Variable.c" to "PrivilegePolymorphic.h", so
that the compiler enforce that the declarations and the definitions match.
(All C source files with the call sites and the function definitions
already include "PrivilegePolymorphic.h" via "Variable.h".)
At the same time:
- replace two typos in the MorLockInit() description:
- replace "EFI_SUCEESS" with "EFI_SUCCESS",
- replace "MOR Lock Control" with "MOR Control Lock";
- in the SetVariableCheckHandlerMor() description:
- replace @param with @param[in],
- correct the description of the Attributes parameter (suggested by Star
Zeng <star.zeng@intel.com>),
- rewrap the comment to 80 columns.
This change cleans up commit 2f6aa774fe ("MdeModulePkg: Add MorLock to
variable driver.", 2016-01-19).
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ladi Prosek <lprosek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
If the platform supports SMM, a gRT->SetVariable() call at boot time
results in the following call tree to SecureBootHook():
RuntimeServiceSetVariable() [VariableSmmRuntimeDxe.c, unprivileged]
SmmVariableHandler() [VariableSmm.c, PRIVILEGED]
VariableServiceSetVariable() [Variable.c, PRIVILEGED]
SecureBootHook() [VariableSmm.c, PRIVILEGED]
//
// do nothing
//
SecureBootHook() [Measurement.c, unprivileged]
//
// measure variable if it
// is related to SB policy
//
And if the platform does not support SMM:
VariableServiceSetVariable() [Variable.c, unprivileged]
SecureBootHook() [Measurement.c, unprivileged]
//
// measure variable if it
// is related to SB policy
//
In other words, the measurement always happens outside of SMM.
Because there are two implementations of the SecureBootHook() API, one
that is called from SMM and does nothing, and another that is called
outside of SMM and measures variables, the function declaration should be
in a header file. This way the compiler can enforce that the function
declaration and all function definitions match.
"Variable.h" is used for "including common header files, defining internal
structures and functions used by Variable modules". Technically, we could
declare SecureBootHook() in "Variable.h". However, "Measurement.c" and
"VariableSmmRuntimeDxe.c" themselves do not include "Variable.h", and that
is likely intentional -- "Variable.h" exposes so much of the privileged
variable implementation that it is likely excluded from these C source
files on purpose.
Therefore introduce a new header file called "PrivilegePolymorphic.h".
"Variable.h" includes this header (so that all C source files that have
been allowed to see the variable internals learn about the new
SecureBootHook() declaration immediately). In "Measurement.c" and
"VariableSmmRuntimeDxe.c", include *only* the new header.
This change cleans up commit fa0737a839 ("MdeModulePkg Variable: Merge
from Auth Variable driver in SecurityPkg", 2015-07-01).
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ladi Prosek <lprosek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
EFI_BOOT_SCRIPT_WRITE() interface is a var-arg interface.
Spec defines the order of parameters for
EFI_BOOT_SCRIPT_PCI_CONFIG2_WRITE_OPCODE as below:
typedef
EFI_STATUS
(EFIAPI *EFI_BOOT_SCRIPT_WRITE) (
IN CONST EFI_S3_SAVE_STATE_PROTOCOL *This,
IN UINT16 OpCode,
IN EFI_BOOT_SCRIPT_WIDTH Width,
IN UINT16 Segment,
IN UINT64 Address,
IN UINTN Count,
IN VOID *Buffer
);
But implementation assumes Segment is in the very end, after Buffer.
Similar spec/implementation gaps are also found for
EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE_OPCODE.
The patch fixes the implementation to extract the arguments in
correct order.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Fix a bug to use module's Name attribute as compare for single module
build. ModuleFile.File can't be used to compare INF file, because it
is the relative path.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Current code logic not check the pointer before use it. This may
has potential issue, this patch add code to check it.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Commit 8932679df5 adds an ASSERT for
checking NULL pointer dereference.
The ASSERT added here is for addressing a false positive NULL pointer
dereference issue raised from static analysis.
This commit adds comments to clarify the reason for using ASSERT as the
check.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=720
The current implementation assumes there is only one hotplug resource
padding for each resource type. It's not true considering
DegradeResource(): MEM64 resource could be degraded to MEM32
resource.
The patch treat the resource paddings using the same logic as
treating typical/actual resources and the total resource of a bridge
is set to the MAX of typical/actual resources and resource paddings.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This patch adds a library that enables invocation of SVCs from Exception
Level EL0. It will be used by the Standalone MM environment to request
services from a software running in a privileged EL e.g. ARM Trusted
Firmware. The library is derived directly from Arm SMC Library.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
[ardb: assign frame pointer (AArch64)
keep stack alignment (ARM)]
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The ESRT hook call that I just added invokes the protocol before
retrieving a pointer to it, which interestingly enough did not
result in any crashes, nor did it get picked up by GCC. Clang did
notice, though, so let's fix it right away.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
SVCs are in the range 0xC4000060 - 0xC400007f.
The functions available to the secure MM partition:
1. Signal completion of MM event handling.
2. Set/Get memory attributes for a memory region at runtime.
3. Get version number of secure partition manager.
Also, it defines memory attributes required for set/get operations.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This patch adds a list of function IDs that fall under the standard
SMC range as defined in [1]
SMCs associated with Management Mode are in the range 0xC4000040 -
0xC400005f (64 bit) and 0x84000040 - 0x8400005f (32 bit).
The function(s) available to the normal world:
1. Request services from the secure MM environment using MM_COMMUNICATE.
It also defines MM return codes.
[1] http://infocenter.arm.com/help/topic/com.arm.doc.den0060a/DEN0060A_ARM_MM_Interface_Specification.pdf.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The ESRT management protocol needs to be invoked at the appropriate times
to get the ESRT config table to be published when the ReadyToBoot event
is signalled. So add this handling to the default ArmPkg implementation
of PlatformBootManagerLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The Juno and FVP platform implement the SBSA Watchdog timers.
Added PcdWatchdogCount to specify the number of Watchdog timers
that are available.
This allows configurability and an option to disable the watchdog
timers if required for testing.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The existing HardwareInterrupt protocol lacked a means to configure the
level/edge properties of an interrupt. The new HardwareInterrupt2
protocol introduced this capability.
This patch updates the GIC drivers to provide the new interfaces.
The changes comprise:
Update to use HardwareInterrupt2 protocol
Additions to register info in ArmGicLib.h
Added new functionality (GetTriggerType and SetTriggerType)
The requirement for this change derives from a problem detected on ARM
Juno boards, but the change is of generic (ARM) relevance.
This commit is in response to review on the mailing list and, as
suggested there, rolls Girish's updates onto Ard's original example.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Tested-by: Girish Pathak <girish.pathak@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The existing HardwareInterrupt protocol lacks the means to configure
the level/edge and polarity properties of an interrupt. So introduce a
new protocol HardwareInterrupt2, and add some new members that allow
manipulation of those properties.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Tested-by: Girish Pathak <girish.pathak@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Parse QEMU_PCI_BRIDGE_CAPABILITY_RESOURCE_RESERVATION from the bridges'
conventional config spaces. Translate the fields as follows:
* BusNumbers:
* 0 -- no reservation;
* (-1) -- firmware default, i.e. no reservation;
* otherwise -- reserve the requested value. (NB, bus number reservation
is not supposed to work before
<https://bugzilla.tianocore.org/show_bug.cgi?id=656> is fixed.)
* Io:
* 0 -- no reservation;
* (-1) -- keep our current default (512B);
* otherwise -- round up the requested value and reserve that.
* NonPrefetchable32BitMmio:
* 0 -- no reservation;
* (-1) -- keep our current default (2MB);
* otherwise -- round up the requested value and reserve that.
* Prefetchable32BitMmio:
* 0 -- no reservation, proceed to Prefetchable64BitMmio;
* (-1) -- firmware default, i.e. no reservation, proceed to
Prefetchable64BitMmio;
* otherwise -- round up the requested value and reserve that. (NB, if
Prefetchable32BitMmio is reserved in addition to
NonPrefetchable32BitMmio, then PciBusDxe currently runs into an
assertion failure. Refer to
<https://bugzilla.tianocore.org/show_bug.cgi?id=720>.)
* Prefetchable64BitMmio:
* only reached if Prefetchable32BitMmio was not reserved;
* 0 -- no reservation;
* (-1) -- firmware default, i.e. no reservation;
* otherwise -- round up the requested value and reserve that.
If QEMU_PCI_BRIDGE_CAPABILITY_RESOURCE_RESERVATION is missing, plus any
time the rounding fails, fall back to the current defaults.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Extract the SetIoPadding() and SetMmioPadding() functions, so that we can
set EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR fields using parameter names and
values that are more friendly than the original field names and their
expected values.
Introduce the HighBitSetRoundUp32() and HighBitSetRoundUp64() functions
for calculating the last parameter ("SizeExponent") of SetIoPadding() and
SetMmioPadding().
Put the new functions to use when requesting the default reservations. (In
order to be consistent with a later patch, "SizeExponent" is calculated
for SetIoPadding() with HighBitSetRoundUp64().)
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
PciHotPlugInitDxe has a static variable called "mPadding" (of type
RESOURCE_PADDING), which describes two constant resource reservations:
- MmioPadding: 2MB of non-prefetchable (hence 32-bit) MMIO space,
- IoPadding: 512B of IO space.
In the GetResourcePadding() member function of
EFI_PCI_HOT_PLUG_INIT_PROTOCOL, the driver outputs a dynamically allocated
verbatim copy of "mPadding", for PciBusDxe to consume in its
ApplyResourcePadding() function.
In a later patch, we're going to compose the set of resource reservations
dynamically, based on QEMU hints. Generalize the RESOURCE_PADDING
structure so that we may generate (or not generate) each resource type
individually:
- Replace the named "MmioPadding" and "IoPadding" fields in
RESOURCE_PADDING with an array of descriptors,
- remove "mPadding",
- in GetResourcePadding(), request the same (default) reservations as
before, as if we attempted and failed to fetch the QEMU hints.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The non-prefetchable MMIO aperture of a bridge can never fall outside of
the 32-bit address space. Namely, the MemoryBase and MemoryLimit fields in
PCI_BRIDGE_CONTROL_REGISTER have type UINT16, and based on the PCI-to-PCI
Bridge Architecture Spec, Chapter 3.2, the actual MMIO aperture is
determined as in:
NonPrefetchMemoryBase = (((MemoryBase & 0xFFF0u) >> 4) << 20) | 0x00000
NonPrefetchMemoryLimit = (((MemoryLimit & 0xFFF0u) >> 4) << 20) | 0xFFFFF
In "OvmfPkg/PciHotPlugInitDxe", the
"mPadding.MmioPadding.AddrSpaceGranularity" field is currently initialized
to 64. According to the above, this is useless generality: a
non-prefetchable MMIO reservation may only be satisfied from 32-bit
address space. Update the field to 32.
In practice this change makes no difference, because PciBusDxe already
enforces the 32-bit limitation when it sees "non-prefetchable" from
(SpecificFlag==0). Quoting commit 8aba40b792 ("OvmfPkg: add
PciHotPlugInitDxe", 2016-06-30): "regardless of our request for 64-bit
MMIO reservation, it is downgraded to 32-bit".
(See the Platform Init Spec 1.6, Volume 5,
- Table 8. "ACPI 2.0 & 3.0 QWORD Address Space Descriptor Usage", and
- Table 11. "Memory Resource Flag (Resource Type = 0) Usage",
for an explanation of the "mPadding.MmioPadding" fields.)
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Fixes: 8aba40b792
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
QEMU has recently gained the ability to provide various hints about its
PCI bridges. The hints take the form of vendor-specific PCI capabilities.
Define macros and types under "OvmfPkg/Include/IndustryStandard" to
describe these capabilities.
The definitions correspond to "docs/pcie_pci_bridge.txt" in the QEMU tree.
Said documentation was added in the last commit of the following series:
a35fe226558a hw/pci: introduce pcie-pci-bridge device
70e1ee59bb94 hw/pci: introduce bridge-only vendor-specific capability to
provide some hints to firmware
226263fb5cda hw/pci: add QEMU-specific PCI capability to the Generic PCI
Express Root Port
c1800a162765 docs: update documentation considering PCIE-PCI bridge
We are going to parse the Resource Reservation Capability in
OvmfPkg/PciHotPlugInitDxe, and return the reservation requests to
PciBusDxe.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Revision 2.2 of the PCI Spec defines Capability IDs 0 through 6,
inclusive, in Appendix H. It reserves IDs 7 through 255.
Revision 2.3 of the PCI Spec adds Capability IDs 7 through 0xC, inclusive,
in Appendix H. Capability ID 9 stands for "Vendor Specific".
Add the EFI_PCI_CAPABILITY_ID_VENDOR macro and the
EFI_PCI_CAPABILITY_VENDOR_HDR structure type to MdePkg/IndustryStandard,
in order to describe this capability header.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Per PI 1.6 we added an FV Extended Header entry that would contain the
size of the FV that was in use.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The debug messages can help developer to know the pre-memory
allocation usage.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=699
Within function AhciModeInitialization(), left shift operations of 'BIT0'
in the following statements:
"if ((PortImplementBitMap & (BIT0 << Port)) != 0) {"
will incur possible out of range left shift when Port is 31, since
"1 << 31" is possible to exceed the range of type 'int' (signed).
According to the C11 spec, Section 6.5.7:
> 4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
> bits are filled with zeros. If E1 has an unsigned type, the value
> of the result is E1 * 2^E2 , reduced modulo one more than the
> maximum value representable in the result type. If E1 has a signed
> type and nonnegative value, and E1 * 2^E2 is representable in the
> result type, then that is the resulting value; otherwise, the
> behavior is undefined.
This commit explicitly cast 'BIT0' with UINT32 to resolve this issue.
Cc: Steven Shi <steven.shi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=698
Within function NetRandomInitSeed(), left shift a negative value is used
in:
"~Time.Hour << 24"
which involves undefined behavior.
Since Time.Hour is of type UINT8 (range from 0 to 23), hence ~Time.Hour
will be a negative value (of type int, signed).
According to the C11 spec, Section 6.5.7:
> 4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
> bits are filled with zeros. If E1 has an unsigned type, the value
> of the result is E1 * 2^E2 , reduced modulo one more than the
> maximum value representable in the result type. If E1 has a signed
> type and nonnegative value, and E1 * 2^E2 is representable in the
> result type, then that is the resulting value; otherwise, the
> behavior is undefined.
This commit will remove the '~' operator before 'Time.Hour', since it
seems like an implementation choice for generating the seed.
Cc: Steven Shi <steven.shi@intel.com>
Cc: Qin Long <qin.long@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=695
Within function CoreRestoreTpl(), left shift a negative value -2 is used
in:
"while (((-2 << NewTpl) & gEventPending) != 0) {"
which involves undefined behavior.
According to the C11 spec, Section 6.5.7:
> 4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
> bits are filled with zeros. If E1 has an unsigned type, the value
> of the result is E1 * 2^E2 , reduced modulo one more than the
> maximum value representable in the result type. If E1 has a signed
> type and nonnegative value, and E1 * 2^E2 is representable in the
> result type, then that is the resulting value; otherwise, the
> behavior is undefined.
This commit refines the code logic to avoid left shifting the negative
value.
Cc: Steven Shi <steven.shi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=702
Within function InternalPrintLibSPrintMarker(), possible left shift of a
negative value is found in:
"(*(ArgumentString + 1) << 8)"
which involves undefined behavior.
Since '*(ArgumentString + 1)' is of type CONST CHAR8 (signed), it will be
promoted to type int (signed) during the left shift operation. If
'*(ArgumentString + 1)' is a negative value, the behavior will be
undefined.
According to the C11 spec, Section 6.5.7:
> 4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
> bits are filled with zeros. If E1 has an unsigned type, the value
> of the result is E1 * 2^E2 , reduced modulo one more than the
> maximum value representable in the result type. If E1 has a signed
> type and nonnegative value, and E1 * 2^E2 is representable in the
> result type, then that is the resulting value; otherwise, the
> behavior is undefined.
This commit explicitly cast '*(ArgumentString + 1)' with UINT8 to resolve
this issue.
Cc: Steven Shi <steven.shi@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=702
Within function InternalPrintLibSPrintMarker(), possible left shift of a
negative value is found in:
"(*(ArgumentString + 1) << 8)"
which involves undefined behavior.
Since '*(ArgumentString + 1)' is of type CONST CHAR8 (signed), it will be
promoted to type int (signed) during the left shift operation. If
'*(ArgumentString + 1)' is a negative value, the behavior will be
undefined.
According to the C11 spec, Section 6.5.7:
> 4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
> bits are filled with zeros. If E1 has an unsigned type, the value
> of the result is E1 * 2^E2 , reduced modulo one more than the
> maximum value representable in the result type. If E1 has a signed
> type and nonnegative value, and E1 * 2^E2 is representable in the
> result type, then that is the resulting value; otherwise, the
> behavior is undefined.
This commit explicitly cast '*(ArgumentString + 1)' with UINT8 to resolve
this issue.
Cc: Steven Shi <steven.shi@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Current implementation deletes the "BootNext" before calling
any PlatformBootManagerLib APIs, but if system resets in
PlatformBootManagerLib APIs, "BootNext" is not consumed but lost.
The patch defers the deletion of "BootNext" to before booting it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Correct the help message to match that defined in Shell spec.
In 'DISCONNECT -r [-nc]' case, '-r' is not optional.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Help message of "dh" gives an example to display all handles
with "Image" protocol but actually "LoadedImage" protocol should
be used.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Replace hard-coded machine code with equivalent assembly source code.
Changes tested by checking for machine code equivalence by disassembling
the original and changed code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chris Ruffin <chris.ruffin@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
V2:
Change function parameter to avoid touch global info in function.
Enhance function name, make it more user friendly
V1:
Refine code to avoid duplicate code to set processor register.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In S3 resume path, current implementation do 2 separate INIT-SIPI-SIPI,
this is not necessary. This change combine these 2 INIT-SIPI-SIPI to 1
and add CpuPause between them.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=655
V2 change:
Put some strings into the UNI file for localization.
The dump information will include:
a. The type of the partition (Mbr, Gpt or Other);
b. Whether the partition is an EFI System Partition.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The current implementation has a typo that maps SmmPciRootBridgeIo
to "PciRootBridgeIo".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Huajing Li <huajing.li@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
In NetbufTrim() function, the NetBuf TotalSize should be checked with 0 before
making the trim operation, otherwise the function will fall into infinite loop.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Use 2-level format to display signature list and signature data.
Support batch delete operation to delete signature list or signature data.
Display more useful information for each signature data.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Cc: Long Qin <qin.long@intel.com>
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Zhang Chao B <chao.b.zhang@intel.com>
The bug is introduced by 1b8eca to collect single module's build time.
Now the fix solution is copied from Platform build.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Within function GetAllocationDescriptorLsn():
The call to GetPdFromLongAd() may return NULL and it will be later
dereferenced in GetShortAdLsn().
This commit adds ASSERT to resolve the potential NULL pointer
dereference.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Add three new options:
--hash enables hash-based caching during build process. when --hash is
enabled, build tool will base on the module hash value to do the
incremental build, without --hash, build tool will base on the
timestamp to do the incremental build. --hash option use md5 method to
get every hash value, DSC/FDF, tools_def.txt, build_rule.txt and build
command are calculated as global hash value, Package DEC and its
include header files are calculated as package hash value, Module
source files and its INF file are calculated as module hash value.
Library hash value will combine the global hash value and its dependent
package hash value. Driver hash value will combine the global hash
value, its dependent package hash value and its linked library hash
value.
When --hash and --binary-destination are specified, build tool will
copy generated binary files for each module into the directory specified
by binary-destination at the build phase. Binary-destination directory
caches all generated binary files.
When --hash and --binary-source are specified, build tool will try to
get the binary files from the binary source directory at the build
phase.If the cached binary has the same hash value, it will be directly
used. Otherwise, build tool will compile the source files and generate
the binary files.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The ConfigData parameter initialized in *GetConfigData function should not be NULL in
later *Support, *Initilize function, so just add ASSERT code check in these functions.
Cc: Ming Shao <ming.shao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Follow PI 1.6 spec to support FFS_ATTRIB_DATA_ALIGNMENT_2 for
FFS alignment extended to support maximum 16MB.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Follow PI 1.6 spec to support FFS_ATTRIB_DATA_ALIGNMENT_2 for
FFS alignment extended to support maximum 16MB.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Follow PI 1.6 spec to add FFS_ATTRIB_DATA_ALIGNMENT_2 definition for
FFS alignment extended to support maximum 16MB.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In the build report, we add AutoGen Phase, Make Phase and GenFds Phase
time duration in the Platform Summary section, and we also add a item
in Module section to display module and library's build time.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Do not reserve entire block device size for an UDF file system -
instead, reserve the appropriate space (UDF logical volume space) for
it.
Additionally, only create a logical partition for UDF logical volumes
that are currently supported by EDK2 UDF file system implementation. For
instance, an UDF volume with a single LVD and a single Physical (Type 1)
Partition will be supported.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reported-by: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Tested-by: Hao Wu <hao.a.wu@intel.com>
Build-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Build-tested-by: Star Zeng <star.zeng@intel.com>
Build-tested-by: Paulo Alcantara <paulo@hp.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Current FFS only supports 64KiB alignment for data, Per PI 1.6
requirement, we extend FFS alignment to 16M.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The patch doesn't change any real functionality.
Only the indent width and EOL are changed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
v3: Add extra CommonNameSize check since OpenSSL didn't check this
input parameter. (One openssl issue was filed to address this risk:
https://github.com/openssl/openssl/issues/4392)
v2: Update function interface to return RETURN_STATUS to represent
different error cases.
Add one new API (X509GetCommonName()) to retrieve the subject commonName
string from one X.509 certificate.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ting Ye <ting.ye@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
In S3 resume, before system transfer to waking vector,
the VTdPmr need turn off VTd protection based upon VTdPolicy.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Clarify the VTdPolicy is for both PEI and DXE.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Make sure the context table are flush to memory.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
> ShellPkg/Library/UefiShellDebug1CommandsLib/DmpStore.c:525:66: error:
> passing argument 2 of 'gEfiShellProtocol->GetGuidName' from incompatible
> pointer type [-Werror=incompatible-pointer-types]
>
> Status = gEfiShellProtocol->GetGuidName(&FoundVarGuid, &GuidName);
> ^
> ShellPkg/Library/UefiShellDebug1CommandsLib/DmpStore.c:525:66: note:
> expected 'const CHAR16 ** {aka const short unsigned int **}' but
> argument is of type 'CHAR16 ** {aka short unsigned int **}'
Pointer-to-(pointer-to-CHAR16) and pointer-to-(pointer-to-const-CHAR16)
are incompatible types; GCC and CLANG are right to complain.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reported-by: Jenkins Build Host <jenkins@kraxel.org>
Reported-by: Steven Shi <steven.shi@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=716
Fixes: 09e8678380
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The feature is primarily useful for modern AARCH64 guests that have no
built-in virtio block / SCSI drivers; as on "qemu-system-aarch64 -M virt",
there are no IDE or AHCI controllers that could be used as fallback. XHCI
is available in "-M virt" however, and because XHCI predates AARCH64 by
several years, said guests are expected to have built-in drivers for it.
Other device models ("usb-uas", "usb-bot") are out of scope for now,
similarly to USB1.x (UHCI) and USB2 (EHCI) host controllers, and similarly
to USB hubs (which are USB1.1 only). In particular, port mapping between
EHCI and companion UHCI controllers is very complex; it even leads to PCI
slot/function differences between the OpenFirmware device paths exported
by QEMU and the the UEFI device paths generated by edk2.
The number of ports on the XHCI controller defaults to 4, but it can be
raised via the "p3" property to 15. In addition, several XHCI controllers
can be grouped into a single-slot, multi-function PCI device. These allow
for a good number of usb-storage devices, while their desired boot order
remains recognizable to this patch.
In the example below, we create two XHCI controllers, grouped into PCI
slot 00:02 as functions 0 and 1. Both controllers are given 15 ports. We
attach a "usb-storage" device to controller 1 at port 3 (ports are 1-based
in QEMU, 0-based in edk2), and attach another "usb-storage" device to
controller 2 at port 9.
QEMU command line options (NB. they apply equally to aarch64/virt and
x86_64/{i440fx,q35}):
-device qemu-xhci,id=xhci1,p3=15,addr=02.0,multifunction=on \
-device qemu-xhci,id=xhci2,p3=15,addr=02.1 \
\
-drive id=disk1,if=none,format=qcow2,$DISK1_OPTIONS \
-drive id=disk2,if=none,format=qcow2,$DISK2_OPTIONS \
\
-device usb-storage,drive=disk1,bus=xhci1.0,port=3,bootindex=1 \
-device usb-storage,drive=disk2,bus=xhci2.0,port=9,bootindex=2 \
Libvirt domain XML fragment:
<controller type='usb' index='1' model='qemu-xhci' ports='15'>
<address type='pci'
domain='0x0000' bus='0x00' slot='0x02' function='0x0'
multifunction='on'/>
</controller>
<controller type='usb' index='2' model='qemu-xhci' ports='15'>
<address type='pci'
domain='0x0000' bus='0x00' slot='0x02' function='0x1'/>
</controller>
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2'/>
<source file='...'/>
<target dev='sda' bus='usb'/>
<boot order='1'/>
<address type='usb' bus='1' port='3'/>
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2'/>
<source file='...'/>
<target dev='sdb' bus='usb'/>
<boot order='2'/>
<address type='usb' bus='2' port='9'/>
</disk>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add NULL pointer check before using a pointer to avoid possible
NULL pointer dereference.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Change "dmpstore" to show name of known variable vendor GUID.
The name is got from ShellProtocol.GetGuidName().
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Huajing Li <huajing.li@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Change since v4: Revise the patch based on V4 sent by Amit Kumar
1) Only return the corresponding protocol interface in *Interface
if the return status is EFI_SUCCESS or EFI_ALREADY_STARTED.
2) Interface is returned unmodified for all error conditions except
EFI_UNSUPPORTED and EFI_ALREADY_STARTED, NULL will be returned in
*Interface when EFI_UNSUPPORTED and Attributes is not
EFI_OPEN_PROTOCOL_TEST_PROTOCOL, the protocol interface will be
returned in *Interface when EFI_ALREADY_STARTED.
Change since v3:
1) Fixed issue when Attributes = EFI_OPEN_PROTOCOL_TEST_PROTOCOL
and Inteface = NULL case. [Reported by:star.zeng at intel.com]
Change Since v2:
1) Modified to use EFI_ERROR to get status code
Change since v1:
1) Fixed typo protocal to protocol
2) Fixed coding style
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Amit Kumar <amit.ak@samsung.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Gabriel Somlo <gsomlo@gmail.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Amit Kumar <amit.ak@samsung.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gabriel Somlo <gsomlo@gmail.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=545
For oneof/numeric/CheckBox(storage can be Bit VarStore)
If the question value can be updated and shown correctly
in UI page, we need do enhancements in following cases:
1. Parse the Ifr data to get the bit VarStore info correctly.
2. Set/get value to/from bit VarStore correctly.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=705
As mentioned in the above Bugzilla link by Steven, within the function
PathCleanUpDirectories(), when executing command:
"cd ."
under Shell, the input parameter 'Path' string will have string length
less than 2. Hence, it is possible for the below statement:
"if (StrCmp (Path + StrLen (Path) - 2, L"\\.") == 0) {"
to read contents before the string boundary.
This commit adds additional checks to avoid this.
Cc: Steven Shi <steven.shi@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=690
Within function EfiShellGetDevicePathFromFilePath(), when the input
parameter 'Path' string is like:
"FS0:"
It is possible for the below statement:
"if (*(Path+StrLen(MapName)+1) == CHAR_NULL) {"
to read the content 1 byte beyond the string boundary (both 'Path' and
'MapName' will be FS0: in this case).
This commit adds additional checks to avoid this.
Cc: Steven Shi <steven.shi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In commit db27e9f3d8 ("OvmfPkg/LegacyRegion: Support legacy region
manipulation of Q35", 2016-03-15), Ray extended the
OvmfPkg/Csm/CsmSupportLib PAM register manipulation to Q35. However, we
missed that the same should be done to the QemuVideoDxe VBE Shim as well.
The omission has caused no problems in practice on Q35, because QEMU has
let us write to the ROM area, regardless of the PAM1 setting, all this
time. This has now changed with recent QEMU commit 208fa0e43645 ("pc: make
'pc.rom' readonly when machine has PCI enabled", 2017-07-28). The QEMU
commit exposes the OVMF bug when Windows 7 is started on Q35, using QEMU
2.10 -- the VBE Shim is no longer put in place and Windows 7 cannot find
it.
To remedy this, assign the "Pam1Address" local variable a PciLib address
that matches the board type (i440fx vs. q35).
Regarding the PcdLib dependency: QemuVideoDxe already uses PcdLib, both
directly (see "PcdDriverSupportedEfiVersion") and indirectly (e.g. via the
DxePciLibI440FxQ35 PciLib instance). Add PcdLib to [LibraryClasses] for
completeness.
Cc: Aleksei Kovura <alex3kov@zoho.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugs.launchpad.net/qemu/+bug/1715700
Reported-by: Aleksei Kovura <alex3kov@zoho.com>
Special-thanks-to: Gerd Hoffmann <kraxel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Aleksei Kovura <alex3kov@zoho.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
* Introduce the PIIX4_PAM* and MCH_PAM* macros under
"OvmfPkg/Include/IndustryStandard". These macros capture the PAM
register offsets (in PCI config space) on the respective Memory
Controller B/D/F, from the respective data sheets.
* Under IndustryStandard, introduce the PMC_REGISTER_PIIX4() macro for
PIIX4. (For Q35, we already have DRAMC_REGISTER_Q35().) In both cases,
the B/D/F is 0/0/0.
* Under CsmSupportLib, replace the "PAMRegOffset" field (UINT8) in the
PAM_REGISTER_VALUE structure with "PAMRegPciLibAddress" (UINTN). The new
field contains the return value of the PCI_LIB_ADDRESS() macro.
* Under CsmSupportLib, replace the "mRegisterValues440" elements as
follows:
REG_PAMx_OFFSET_440, ReadEnableData, WriteEnableData
-->
PMC_REGISTER_PIIX4 (PIIX4_PAMx), ReadEnableData, WriteEnableData
* Under CsmSupportLib, replace the "mRegisterValuesQ35" elements as
follows:
REG_PAMx_OFFSET_Q35, ReadEnableData, WriteEnableData
-->
DRAMC_REGISTER_Q35 (MCH_PAMx), ReadEnableData, WriteEnableData
* Under CsmSupportLib, update the register address calculations as follows
(for all of PciOr8(), PciAnd8() and PciRead8()):
PCI_LIB_ADDRESS (
PAM_PCI_BUS,
PAM_PCI_DEV,
PAM_PCI_FUNC,
mRegisterValues[Index].PAMRegOffset
)
-->
mRegisterValues[Index].PAMRegPciLibAddress
* Under CsmSupportLib, remove the PAM_PCI_* and REG_PAM*_OFFSET_* macros.
Technically speaking, these changes could be split into three patches
(IndustryStandard macro additions, CsmSupportLib code updates,
CsmSupportLib macro removals). However, the patch is not big, and in this
case it is actually helpful to present the code movement / refactoring in
one step, for easier verification.
Cc: Aleksei Kovura <alex3kov@zoho.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugs.launchpad.net/qemu/+bug/1715700
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Aleksei Kovura <alex3kov@zoho.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The commits utilizes a local variable to store the length of a string
which will be used right after.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Let system report RMRR table for the platform support
PEI graphic.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In order to support PEI graphic, we let VTdPmrPei driver
parse DMAR table RMRR entry and allow the UMA access.
If a system has no PEI IGD, no RMRR is needed. The behavior
is unchanged.
If a system has PEI IGD, it must report RMRR in PEI phase.
The PeiVTdPrm will program the IGD VTd engine to skip the
RMRR region, and program the rest PCI VTd engine to skip
the another DMA buffer allocated in PEI phase for other
device driver.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
We notice that there is real usage in PEI to show
the graphic out. As such we need report RMRR table
in PEI to let VTdPmrPei driver skip the IGD UMA region.
Now the VTD_INFO PPI uses the same DMAR data structure.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Commit 8f0b62a5da ("BaseTools/tools_def AARCH64: enable frame pointers
for DEBUG builds") removed the -fomit-frame-pointer switch from the CFLAGS
definitions that are shared between AARCH64 DEBUG and RELEASE builds, and
moved it to the RELEASE specific ones, so that DEBUG builds can produce a
backtrace when a crash occurs.
This is actually a useful thing to have for RELEASE builds as well. AArch64
has 30 general purpose registers, and so the performance hit of having a
frame pointer is unlikely to be noticeable, nor are the additional 8 bytes
of stack space likely to present a problem.
So remove -fomit-frame-pointer altogether this time.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Process any capsule HOBs that were left for us by CapsulePei. This
involves calling ProcessCapsules() twice, as explained in the comment
in DxeCapsuleLibFmp [sic].
1) The first call must be before EndOfDxe. The system capsules is processed.
If device capsule FMP protocols are exposted at this time and device FMP
capsule has zero EmbeddedDriverCount, the device capsules are processed.
Each individual capsule result is recorded in capsule record variable.
System may reset in this function, if reset is required by capsule and
all capsules are processed.
If not all capsules are processed, reset will be defered to second call.
2) The second call must be after EndOfDxe and after ConnectAll, so that all
device capsule FMP protocols are exposed.
The system capsules are skipped. If the device capsules are NOT processed
in first call, they are processed here.
Each individual capsule result is recorded in capsule record variable.
System may reset in this function, if reset is required by capsule
processed in first call and second call.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
We met a case that use two microcode files in the Microcode.inf file,
one is .mcb file, another is .txt file. then it cause build failure
because the SourceFileList include the .txt file's output file, while
this output file is still not be generated, so it cause
GetFileDependency report failure.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Case 1 - Within DuplicateFid() & DuplicateFe():
The call to AllocateCopyPool() may return NULL.
Add ASSERTs as checks.
Case 2 - Within UdfRead():
Add ASSERT to ensure 'NewFileEntryData' returned from FindFileEntry()
will not be NULL pointer.
Case 3 - Within GetAllocationDescriptorLsn():
The return value of 'GetPdFromLongAd (Volume, ParentIcb)' may be NULL,
and it will be passed into function GetShortAdLsn() which will
dereference it.
Add ASSERT in GetShortAdLsn() as check.
Case 4 - Within ReadFile():
Add ASSERT to ensure 'Data' returned from GetAedAdsData() will not be NULL
pointer.
Case 5 - Within InternalFindFile():
If both 'Parent->FileIdentifierDesc' and 'Icb' are NULL, then possible
NULL pointer dereference will happen in ReadDirectoryEntry().
Add additional check to resolve.
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Issue : When try to change serial attributes using sermode
command, the default values are set with the execute flow
as below.
The sermode command calls SerialSetAttributes, which sets H/W
attributes of Serial device. After that the SerialIo protocol is
reinstalled, which causes MdeModulePkg/Universal/Console/TerminalDxe
and MdeModulePkg/Universal/Console/ConPlatformDxe drivers' bindings
to stop and then start. This in turn calls SerialReset, which undoes
changes of SerialSetAttributes.
Cause : The SerialReset command resets the attributes' values
to default.
Fix : Serial Reset command should set the attributes which have
been changed by user after calling SerialSetAttributes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The generic driver has no way to know whether an OEM type should
be filtered or not.
This patch is to update the code to skip measurement for OEM type
and platform code can measure it by self if required.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Update XHCI driver to consume IOMMU_PPI to allocate DMA buffer.
If no IOMMU_PPI exists, this driver still calls PEI service
to allocate DMA buffer, with assumption that DRAM==DMA.
This is a compatible change.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This is a sample driver to produce VTD_INFO PPI.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This PEIM is to produce IOMMU_PPI, so that PEI device
driver can have better DAM management.
This PEIM will setup VTD PMR register to protect
most DRAM. It allocates a big chunk DMA buffer in
the entrypoint, and only use this buffer for DMA.
Any other region is DMA protected.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This VTD_INFO_PPI is to provide VTD information in PEI.
As such, we can have a generic VTd driver.
It is a lightweight version DMAR table, but it does
not contain PCI device information.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When VTd translation is enabled, PMR can be disable.
Or the DMA will be blocked by PMR.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This IOMMU_PPI is to provide IOMMU abstraction in PEI.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The ARMv8.2-FP16 extension introduces support for half precision
floating point and the processor ID registers have been updated to
enable detection of the implementation.
The possible values for the FP bits in ID_AA64PFR0_EL1[19:16] are:
- 0000 : Floating-point is implemented.
- 0001 : Floating-point including Half-precision support is
implemented.
- 1111 : Floating-point is not implemented.
- All other values are reserved.
Previously ArmEnableVFP() compared the FP bits with 0000b to see if
the FP was implemented, before enabling FP. Modified this check to
enable the FP if the FP bits 19:16 are not 1111b.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=704
For root directory, the FID (File Identifier Descriptor) pointer is
accessible through PRIVATE_UDF_FILE_DATA.Root, whereas non-root
directory and regular files, their FIDs are accessible through
PRIVATE_UDF_FILE_DATA.File.
In UdfSetPosition(), the FID was retrieved through
PRIVATE_UDF_FILE_DATA.File, hence when calling it with a root directory,
PRIVATE_UDF_FILE_DATA.File.FileIdentifierDescriptor would be NULL and
then dereferenced.
This patch fixes the NULL pointer dereference by calling _FILE() to
transparently return the correct UDF_FILE_INFO * which points to a valid
FID descriptor of a specific file.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Steven Shi <steven.shi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reported-by: Steven Shi <steven.shi@intel.com>
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
VS2010/VS2012 build failure with below info:
warning C4701:
potentially uninitialized local variable 'DataOffset' used
potentially uninitialized local variable 'FilePosition' used
potentially uninitialized local variable 'FinishedSeeking' used
potentially uninitialized local variable 'Data' used
warning C4703:
potentially uninitialized local pointer variable 'Data' used
In fact, DataOffset, FilePosition and FinishedSeeking are initialized
and then used if (ReadFileInfo->Flags == READ_FILE_SEEK_AND_READ).
DoFreeAed will be set to TRUE when Data is allocated and returned from
GetAedAdsData(), and Data will be freed if (DoFreeAed) when exiting.
Use same method at 5afa5b8159 to fix
the build failure.
There is related discussion at
https://lists.01.org/pipermail/edk2-devel/2017-September/014641.html
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
VirtioNetDxe driver has been updated to use IOMMU-like member functions
from VIRTIO_DEVICE_PROTOCOL to translate the system physical address to
device address. We do not need to do anything special when
VIRTIO_F_IOMMU_PLATFORM bit is present hence treat it in parallel with
VIRTIO_F_VERSION_1.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
When device is behind the IOMMU, driver is require to pass the device
address of caller-supplied transmit buffer for the bus master operations.
The patch uses VirtioNetMapTxBuf() to map caller-supplied Tx packet to a
device-address and enqueue the device address in VRING for transfer and
perform the reverse mapping when transfer is completed so that we can
return the caller-supplied buffer.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
When device is behind IOMMU, driver is require to pass the device address
of TxBuf in the Tx VRING. The patch adds helper functions and data
structure to map and unmap the TxBuf system physical address to a device
address.
Since the TxBuf is returned back to caller from VirtioNetGetStatus() hence
we use OrderedCollection interface to save the TxBuf system physical to
device address mapping. After the TxBuf is succesfully transmitted
VirtioNetUnmapTxBuf() does the reverse lookup in OrderedCollection data
structure to get the system physical address of TxBuf for a given device
address.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Each network packet is submitted for transmission by pushing the head
descriptor of a two-part descriptor chain to the Available Ring of the
TX queue. VirtioNetInitTx() sets up the the descriptor chains for all
queueable packets in advance, and points all the head descriptors to the
same shared, never modified, VIRTIO_1_0_NET_REQ header object (or its
initial VIRTIO_NET_REQ sub-object, dependent on virtio version).
VirtioNetInitTx() currently uses the header object's system physical
address for populating the head descriptors.
When device is behind the IOMMU, VirtioNet driver is required to provide
the device address of VIRTIO_1_0_NET_REQ header. In this patch we
dynamically allocate the header using AllocateSharedPages() and map with
BusMasterCommonBuffer so that header can be accessed by both processor
and the device.
We map the header object for CommonBuffer operation because, in order to
stick with the current code order, we populate the head descriptors with
the header's device address first, and fill in the header itself second.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
When device is behind the IOMMU, VirtioNetDxe is required to use the
device address in bus master operations. RxBuf is allocated using
AllocatePool() which returns the system physical address.
The patch uses VIRTIO_DEVICE_PROTOCOL.AllocateSharedPages() to allocate
the RxBuf and map with VirtioMapAllBytesInSharedBuffer() so that we can
obtain the device address for RxBuf.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
When building the driver for DEBUG/RELEASE, GCC48/GCC49 warn about
ReadFile() possibly using "BytesLeft" without initializing it first.
This is not the case. The reads of "BytesLeft" are only reachable if
(ReadFileInfo->Flags == READ_FILE_SEEK_AND_READ). But, in that case, we
also set "BytesLeft" to "ReadFileInfo->FileDataSize", near the top of the
function.
Assign "BytesLeft" zero at the top, and add a comment that conforms to the
pending Coding Style Spec feature request at
<https://bugzilla.tianocore.org/show_bug.cgi?id=607>.
This issue was reported by Ard's and Gerd's CI systems independently.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
The ECMA-167 standard (3rd Edition, June 1997) reserves values 4 through 7
in the ICB.Flags[2:0] bit-field for future standardization; see "14.6 ICB
Tag" / "14.6.8 Flags (RBP 18)".
https://www.ecma-international.org/publications/standards/Ecma-167.htm
The
switch (RecordingFlags)
statement in the ReadFile() function handles all the standard values,
using the constants of the UDF_FE_RECORDING_FLAGS enum type. However, the
reserved values are not caught with a "default" case label, which both
breaks the edk2 Coding Style Spec, and leaves the Status variable
un-initialized, before we return Status under the Done label.
Set Status to EFI_UNSUPPORTED if we encounter a reserved value.
This issue was reported by Ard's and Gerd's CI systems independently
(through build failures with GCC48/GCC49, DEBUG/RELEASE targets).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
To avoid the function name conflict, update the internal function name
to be the specific one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
"ArmVirtXen.fdf" pulls in none of the drivers from
"MdeModulePkg/Universal/Network", therefore building them in
"ArmVirtXen.dsc", via "ArmVirt.dsc.inc", is wasted work.
Move the "MdeModulePkg/Universal/Network" drivers from "ArmVirt.dsc.inc"
to "ArmVirtQemu.dsc" and "ArmVirtQemuKernel.dsc".
Place the new block between the "Bds" and "SCSI Bus and Disk Driver"
blocks, similarly to its context in "ArmVirtQemuFvMain.fdf.inc".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In the expression
(RemainderByMediaBlockSize != 0 ||
Media->BlockSize > UDF_LOGICAL_SECTOR_SIZE)
the second expression is only evaluated if the first expression is false.
If the first expression is false, i.e.,
RemainderByMediaBlockSize == 0
then UDF_LOGICAL_SECTOR_SIZE is a whole multiple of "Media->BlockSize",
which implies
UDF_LOGICAL_SECTOR_SIZE >= Media->BlockSize.
Therefore whenever
Media->BlockSize > UDF_LOGICAL_SECTOR_SIZE
is evaluated, it is false.
The expression
((expression) || FALSE)
is equivalent to
(expression).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In edk2, the division and shifting of 64-bit values are forbidden with
C-language operators, because the compiler may generate intrinsic calls
for them.
For example, clang-3.8 emits a call to "__umoddi3" for
UDF_LOGICAL_SECTOR_SIZE % Media->BlockSize
in PartitionInstallUdfChildHandles(), if PartitionDxe is built for IA32,
which then fails to link.
UDF_LOGICAL_SECTOR_SIZE has type UINT64, while
EFI_BLOCK_IO_MEDIA.BlockSize has type UINT32(). Replace the % operator
with a DivU64x32Remainder() call.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In edk2, initialization of local variables is forbidden, both for
stylistic reasons and because such initialization may generate calls to
compiler intrinsics.
For the following initialization in UdfRead():
CHAR16 FileName[UDF_FILENAME_LENGTH] = { 0 };
clang-3.8 generates a memset() call, when building UdfDxe for IA32, which
then fails to link.
Replace the initialization with ZeroMem().
Do the same to "FilePath" in UdfOpen().
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Ard reports that clang-3.8 correctly flags the following issue in the
ReadFile() function:
If "RecordingFlags" is INLINE_DATA, then there are three paths through the
code where we mean to return success, but forget to set Status
accordingly:
(1) when "ReadFileInfo->Flags" is READ_FILE_GET_FILESIZE, or
(2) when "ReadFileInfo->Flags" is READ_FILE_ALLOCATE_AND_READ and
AllocatePool() succeeds, or
(3) when "ReadFileInfo->Flags" is READ_FILE_SEEK_AND_READ.
Set "Status" to EFI_SUCCESS when we are done processing the INLINE_DATA
request, i.e., when we reach the corresponding "break" statament under the
INLINE_DATA case label.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In the ReadFile() function, if "RecordingFlags" is INLINE_DATA, then we
cover the following values of "ReadFileInfo->Flags":
- READ_FILE_GET_FILESIZE
- READ_FILE_ALLOCATE_AND_READ
- READ_FILE_SEEK_AND_READ
We don't do anything (just proceed to the end of the function) if
"ReadFileInfo->Flags" is anything else.
In reality the above three values cover the domain of the
UDF_READ_FILE_FLAGS enum type fully, and "ReadFileInfo->Flags" is only
ever set internally to UdfDxe. Therefore any other flag value would be a
bug in UdfDxe.
ASSERT() specifically that "ReadFileInfo->Flags" has been set correctly,
so that the reader is not left wondering what happens if none of the enum
constants match.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
V3: Remove one unnecessay type cast in patch 1.
Codes:
if (FilePosition + ExtentLength > ReadFileInfo->FilePosition) {
Offset = ReadFileInfo->FilePosition - FilePosition;
if (Offset < 0) {
Offset = -(Offset)
}
...
}
Offset is UINT64 can not < 0, so the code logic may have some issue.
and Offset = -(Offset) may build failure in some circumstance.
Previously type cast Offset to INT64 to fix build break. Now remove
the type cast. Then can to check the code logic later.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
If DAD failed, we print "It failed to set", print the IPv6
address and exit. We need a better error string
and also, after printing the IPv6 address, we need a new line
else the Shell> prompt will overwrite the IPv6 address. Fixed
these issues in this patch.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
When creating the ISCSI string OpCode for IP_ADDRESS, the max length
should be IP(4)_STR_MAX_SIZE instead of IP(4)_MAX_SIZE.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
When a UEFI_DRIVER attempts to open a protocol interface with BY_DRIVER
attribute that it already has open with BY_DRIVER attribute,
OpenProtocol() returns EFI_ALREADY_STARTED. This is not an error. The
UEFI-2.7 spec currently says,
> EFI_ALREADY_STARTED -- Attributes is BY_DRIVER and there is an item on
> the open list with an attribute of BY_DRIVER
> whose agent handle is the same as AgentHandle.
(In fact it is so much an expected condition that recent USWG Mantis
ticket <https://mantis.uefi.org/mantis/view.php?id=1815> will codify its
additional edk2-specific behavior, namely to output the protocol interface
at once.)
Downgrade the log mask for this one condition to DEBUG_INFO, in
SataControllerStart(). This will match the log mask of the other two
informative messages in this function, "SataControllerStart START", and
"SataControllerStart END status = %r" (at which point Status can only be
EFI_SUCCESS).
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
"Boot Mode:%x" is an informative message, not an error report. Set its
debug mask to DEBUG_INFO.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
"Platform PEIM Loaded" is an informative message, not an error report. Set
its debug mask to DEBUG_INFO.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
"Detect CPU count: %d\n" is an informative message, not an error report.
Set its debug mask to DEBUG_INFO.
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
"UsbSelectConfig: failed to connect driver %r, ignored" is an error
message, but it states at once that the error condition will not affect
the control flow. Degrade the report to DEBUG_WARN.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Since commit 19c6d9feaa ("MdePkg: Expand BaseIoLibIntrinsic (IoLib
class) library", 2017-01-14), IoWriteFifo8() has been widely available to
modules. Use it to print debug messages and assertion failures to the QEMU
debug port, rather than open-coded loops.
In the general case this speeds up logging, because debug messages will
now trap to QEMU once per message (as opposed to once per character), due
to "REP OUTSB" in "MdePkg/Library/BaseIoLibIntrinsic/*/IoFifoSev.nasm".
In SEV guests, there is no speedup (SEV doesn't support the REP prefix).
SEV is detected internally to BaseIoLibIntrinsic.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Brijesh Singh <brijesh.singh@amd.com>
In commit b6d11d7c46 ("MdePkg: BaseIoLibIntrinsic (IoLib class)
library", 2017-04-12), the MOV instructions in the write loops were
probably copied from the read loops. However, the operand order was not
adjusted.
As a result, the IoWriteFifoXX() routines, when invoked in SEV guests, now
overwrite the source buffer with value 0x01 / 0x0001 / 0x00000001 -- the
SevNoRepIo() function returns value 1 in EAX, in SEV guests --, and write
the same value to the target IO port.
Fix this by putting the target operand (AL / AX / EAX) first, and the
source operand (BYTE / WORD / DWORD [ESI/RSI]) second.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Fixes: b6d11d7c46
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
the case is that override the mixed pcd value in DSC [Components]
section, the value display in the report is incorrect.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Per build spec, If the value obtained from either a build option, the
DSC or FDF is the same as the value in the DEC, then *B , *P or *F
will not be shown in the report.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch fixed the bug that same region print twice in the build log.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Not generic to use 'Common' arch, but use current build arch.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
TianoCore BZ#700 [1]
Set the '-Wno-unused-const-variables' in RELEASE builds with the
GGC49 and GCC5 toolchain.
This fixes the RELEASE build of OVMF with GCC in version 6 or newer.
GCC 6 added the '-Wunused-const-variable' warning, which gets
activated by '-Wunused-variable' and has the following behavior:
"Warn whenever a constant static variable is unused aside from its
declaration" [2]
Commit 2ad6ba80a1 introduced a case
where exactly this happens on a RELEASE build. All uses of the static
const variable are located in debug code only, which gets thrown out
by the compiler on RELEASE builds and thus triggers the
unused-const-variable warning.
There is currently no GCC 6 toolchain target defined and doing so
would add a lot of boilerplate code. Instead, use the fact that GCC
ignores unknown '-Wno-*' options:
"[...] if the -Wno- form is used [...] no diagnostic is produced for
-Wno-unknown-warning unless other diagnostics are being produced"
This behavior is available in GCC 4.9 [3] (and also earlier, for that
matter), so add the flag to the GCC49 and GCC5 toolchain, even if
both GCC versions do not supports it.
GCC49 doesn't enables LTO whereas GCC5 does. As GCC 6.0 through 6.2
had bugs relating to LTO there can be desire to use the GCC49 target
even if compiling with GCC 6, see 432f1d83f7.
Orient the changes on 20d00edf21 which moved the
'-Wno-unused-but-set-variable' flag to RELEASE builds only, as there
it ensure that it does not gets raised if the only usage of a
variable is in (then collapsed) debug code.
[1] https://bugzilla.tianocore.org/show_bug.cgi?id=700
[2] https://gcc.gnu.org/onlinedocs/gcc-6.4.0/gcc/Warning-Options.html#index-Wunused-const-variable
[3] https://gcc.gnu.org/onlinedocs/gcc-4.9.0/gcc/Warning-Options.html
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
[lersek@redhat.com: fix typo in subject]
This patch introduces UDF file system support in EDK2. All block devices
that support BlockIo and DiskIo protocols and contain a valid UDF file
system - as specified by OSTA Universal Disk Format (revisions 1.02
through 2.60) - will be installed EFI_SIMPLE_FILE_SYSTEM_PROTOCOL to
provide access to underlying file system.
File system operations on regular, directory and symlink files are
supported.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Scan for UDF file systems on all block devices, as specified by OSTA
Universal Disk Format Specification 2.60, and install a Vendor-Defined
Media Device Path for each file system found.
The Vendor-Defined Media Device Path for the UDF file system is then
checked by UdfDxe to decide whether or not start the driver.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This patch adds basic volume structure definitions necessary to identify
a valid UDF file system on a block device, as specified by OSTA
Universal Disk Format Specification 2.60.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Register an ExitBootServices() callback that tears down all IOMMU
mappings, without modifying the UEFI memory map.
The trick is that in the ExitBootServices() callback, we don't immediately
do the work; instead we signal another (private) event.
Normally the dispatch order of ExitBootServices() callbacks is unspecified
(within the same task priority level anyway). By queueing another
function, we delay the unmapping until after all PciIo and Virtio drivers
abort -- in their own ExitBootServices() callbacks -- the pending DMA
operations of their respective controllers.
Furthermore, the fact that IoMmuUnmapWorker() rewrites client-owned memory
when it unmaps a Write or CommonBuffer bus master operation, is safe even
in this context. The existence of any given "MapInfo" in "mMapInfos"
implies that the client buffer pointed-to by "MapInfo->CryptedAddress" was
live when ExitBootServices() was entered. And, after entering
ExitBootServices(), nothing must have changed the UEFI memory map, hence
the client buffer at "MapInfo->CryptedAddress" still exists.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
IoMmuUnmapWorker() is identical to IoMmuUnmap(), it just takes an
additional BOOLEAN parameter called "MemoryMapLocked". If the memory map
is locked, IoMmuUnmapWorker() does its usual job, but it purposely leaks
memory rather than freeing it. This makes it callable from
ExitBootServices() context.
Turn IoMmuUnmap() into a thin wrapper around IoMmuUnmapWorker() that
passes constant FALSE for "MemoryMapLocked".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
The "mRecycledMapInfos" list implements an internal pool of unused
MAP_INFO structures between the IoMmuUnmap() and IoMmuMap() functions. The
original goal was to allow IoMmuUnmap() to tear down CommonBuffer mappings
without releasing any memory: IoMmuUnmap() would recycle the MAP_INFO
structure to the list, and IoMmuMap() would always check the list first,
before allocating a brand new MAP_INFO structure.
In one of the following patches, we'll change OvmfPkg/IoMmuDxe so that it
unmaps all existent bus master operations (CommonBuffer, Read, Write) at
ExitBootServices(), strictly after the individual device drivers abort
pending DMA on the devices they manage, in their own ExitBootServices()
notification functions.
For this, rename and repurpose the list to track all live mappings.
This means that IoMmuUnmap() will always release a MAP_INFO structure
(even when cleaning up a CommonBuffer operation). That's fine (for now),
because device drivers are no longer expected to call Unmap() in their
ExitBootServices() notification functions.
In theory, we could also move the allocation and freeing of the stash
buffer from IoMmuAllocateBuffer() and IoMmuFreeBuffer(), respectively, to
IoMmuMap() and IoMmuUnmap(). However, this would require allocating and
freeing a stash buffer in *both* IoMmuMap() and IoMmuUnmap(), as
IoMmuMap() performs in-place decryption for CommonBuffer operations, and
IoMmuUnmap() performs in-place encryption for the same.
By keeping the stash buffer allocation as-is, not only do we keep the code
almost fully undisturbed, but
- we also continue to guarantee that IoMmuUnmap() succeeds: allocating a
stash buffer in IoMmuUnmap(), for in-place encryption after a
CommonBuffer operation, could fail;
- we also keep IoMmuUnmap() largely reusable for ExitBootServices()
callback context: allocating a stash buffer in IoMmuUnmap() would simply
be forbidden in that context.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
In one of the following patches, we'll change OvmfPkg/IoMmuDxe so that it
unmaps all existent bus master operations (CommonBuffer, Read, Write) at
ExitBootServices(), strictly after the individual device drivers abort
pending DMA on the devices they manage, in their own ExitBootServices()
notification functions.
In preparation, remove the explicit
VIRTIO_DEVICE_PROTOCOL.UnmapSharedBuffer() call from VirtioScsiExitBoot(),
originally added in commit fc2168feb2 ("OvmfPkg/VirtioScsiDxe: map VRING
using VirtioRingMap()", 2017-08-31).
Add a DEBUG message so we can observe the ordering between
VirtioScsiExitBoot() and the upcoming cleanup of mappings in
OvmfPkg/IoMmuDxe.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
In one of the following patches, we'll change OvmfPkg/IoMmuDxe so that it
unmaps all existent bus master operations (CommonBuffer, Read, Write) at
ExitBootServices(), strictly after the individual device drivers abort
pending DMA on the devices they manage, in their own ExitBootServices()
notification functions.
In preparation, remove the explicit
VIRTIO_DEVICE_PROTOCOL.UnmapSharedBuffer() call from VirtioRngExitBoot(),
originally added in commit 0a568ccbcb ("OvmfPkg/VirtioRngDxe: map host
address to device address", 2017-08-23).
Add a DEBUG message so we can observe the ordering between
VirtioRngExitBoot() and the upcoming cleanup of mappings in
OvmfPkg/IoMmuDxe.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
In one of the following patches, we'll change OvmfPkg/IoMmuDxe so that it
unmaps all existent bus master operations (CommonBuffer, Read, Write) at
ExitBootServices(), strictly after the individual device drivers abort
pending DMA on the devices they manage, in their own ExitBootServices()
notification functions.
In preparation, remove the explicit
VIRTIO_DEVICE_PROTOCOL.UnmapSharedBuffer() calls from VirtioGpuExitBoot(),
originally added in commit 9bc5026c19 ("OvmfPkg/VirtioGpuDxe: map VRING
for bus master common buffer operation", 2017-08-26) and commit
f10ae92366 ("OvmfPkg/VirtioGpuDxe: map backing store to bus master
device address", 2017-08-26).
Add a DEBUG message so we can observe the ordering between
VirtioGpuExitBoot() and the upcoming cleanup of mappings in
OvmfPkg/IoMmuDxe.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
In one of the following patches, we'll change OvmfPkg/IoMmuDxe so that it
unmaps all existent bus master operations (CommonBuffer, Read, Write) at
ExitBootServices(), strictly after the individual device drivers abort
pending DMA on the devices they manage, in their own ExitBootServices()
notification functions.
In preparation, remove the explicit
VIRTIO_DEVICE_PROTOCOL.UnmapSharedBuffer() call from VirtioBlkExitBoot(),
originally added in commit 1916513047 ("OvmfPkg/VirtioBlkDxe: map VRING
using VirtioRingMap()", 2017-08-27).
Add a DEBUG message so we can observe the ordering between
VirtioBlkExitBoot() and the upcoming cleanup of mappings in
OvmfPkg/IoMmuDxe.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
The AtaAtapiPassThru driver maps three system memory regions for Bus
Master Common Buffer operation on the following call path, if the
controller has PCI_CLASS_MASS_STORAGE_SATADPA class code:
AtaAtapiPassThruStart()
EnumerateAttachedDevice()
AhciModeInitialization()
AhciCreateTransferDescriptor()
The device is disabled (including Bus Master DMA) when the controller is
unbound, in AtaAtapiPassThruStop(). Then the regions are unmapped.
The former step should also be done when we exit the boot services, and
the OS gains ownership of system memory.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
For setting high speed in SD card,
First CMD 6 (Switch) is send to check if card supports High Speed and
Second command is send to switch card to high speed mode.
In current inplementation, CMD 6 was sent only once to switch the
card into HS mode without checking if card supports HS or not, which is
not as per specification and also we are not setting the HS i.e. 50000000
but directly asking the card to switch to 26000000 which is incorrect as
SD card supports either 25000000 or 50000000.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
We want to print name of the function resulted in error,
but __FUNCTION__ macro was missing.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
BIT0: This is to control if a platform wants to enable VTd
based protection during boot.
BIT1: This is to control if a platform wants to keep VTd
enabled at ExitBootService.
The default configuration is BIT0:1, BIT1:0.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In earlier PEI stage, temporary memory at PcdOvmfSecPeiTempRamBase is
employed as stack and heap. We move them to the new room and do some
relocation fixup when permanent memory becomes available.
TemporaryRamMigration() is responsible for switching the stack.
Before entering TemporaryRamMigration(), Ebp/Rbp is populated with the
content of Esp/Rsp and used as frame pointer.
After the execution of SetJump/LongJump, stack migrates to new position
while the context keeps unchanged.
But when TemporaryRamMigration() exits, Esp/Rsp is filled with
the content of Ebp/Rbp to destroy this stack frame.
The result is, stack switches back to previous temporary memory.
When permanent memory becomes available, modules that have registered
themselves for shadowing will be scheduled to execute. Some of them
need to consume more memory(heap/stack). Contrast to temporary stack,
permanent stack possesses larger space.
The potential risk is overflowing the stack if stack staying in
temporary memory. When it happens, system may crash during S3 resume.
More detailed information:
> (gdb) disassemble /r
> Dump of assembler code for function TemporaryRamMigration:
> 0x00000000fffcd29c <+0>: 55 push %rbp
> 0x00000000fffcd29d <+1>: 48 89 e5 mov %rsp,%rbp
> 0x00000000fffcd2a0 <+4>: 48 81 ec 70 01 00 00 sub
> $0x170,%rsp
> ...
> ...
> 0x00000000fffcd425 <+393>: e8 80 10 00 00 callq 0xfffce4aa
> <SaveAndSetDebugTimerInterrupt>
> => 0x00000000fffcd42a <+398>: b8 00 00 00 00 mov $0x0,%eax
> 0x00000000fffcd42f <+403>: c9 leaveq
> 0x00000000fffcd430 <+404>: c3 retq
> End of assembler dump.
See the description of leave(opcode: c9), from
Intel 64 and IA-32 Architectures Software Developer's Manual, Volume 2A
"Releases the stack frame set up by an earlier ENTER instruction. The
LEAVE instruction copies the frame pointer (in the EBP register) into
the stack pointer register (ESP), which releases the stack space
allocated to the stack frame. The old frame pointer (the frame pointer
for the calling procedure that was saved by the ENTER instruction) is
then popped from the stack into the EBP register, restoring the calling
procedure’s stack frame."
To solve this, update Ebp/Rbp too when Esp/Rsp is updated
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ge Song <ge.song@hxt-semitech.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Even though RELEASE builds produce some diagnostics when a crash
occurs, they can be rather unhelpful:
Synchronous Exception at 0x0000000000000000
and sometimes, it would be useful to get a full register dump from
a production machine without having to modify the firmware.
This can be achieved very easily by incorporating a DEBUG build of
ARM's DefaultExceptionHandlerLib into a DXE driver, and registering
its DefaultExceptionHandler entry point as the synchronous exception
handler, overriding the default one. If we then build this driver
using the UefiDebugLibConOut DebugLib implementation, we end up
with a module than can simply be loaded via the Shell on any system.
Shell> load fs0:ArmCrashDumpDxe.efi
As a bonus, the crash dump will also appear on the graphical display,
not only on the serial port.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The IP driver uses EfiCreateProtocolNotifyEvent() to register notify callback
function for IpSec protocol, but it didn't notice that the callback will always
be executed at least once, even the protocol wasn't in handle database.
As a result, the Ip6IpSecProcessPacket() will still always call LocateProtocol()
even the IpSec protocol is not installed, which will impact the network
performance.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The IP driver uses EfiCreateProtocolNotifyEvent() to register notify callback
function for IpSec protocol, but it didn't notice that the callback will always
be executed at least once, even the protocol wasn't in handle database.
As a result, the Ip4IpSecProcessPacket() will still always call LocateProtocol()
even the IpSec protocol is not installed, which will impact the network
performance.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Add /n for debug message to make error more
readable.
Suggested-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
If IOMMU is enabled, the legacy BIOS need allow the legacy memory
access by the legacy device.
The legacy memory is below 1M memory and HighPmm memory.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Remove zero address check in IoMmuMap.
The reason is that a CSM legacy driver may use legacy memory for DMA.
As such, the legacyBios need allow below 1M to the legacy device.
This patch also fixed some typo.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=620
Adds the support for SD/eMMC device path to show as a boot option.
The CID register content (returned from DiskInfo->Inquiry) seems do not
provide very useful/readable 'OEM/Application ID' and 'Product name'
field.
For SD devices, the OID is a 2-character ASCII string and the Product name
is a 5-character ASCII string.
For eMMC devices, the OID is an 8-bit binary number and the Product name
is a 6-character ASCII string.
These strings are relatively short and do not provide a very readable
description. Hence, this commit uses general 'SD (eMMC) Device' for the
boot option description.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This patch makes Pkcs7VerifyDxe check that it has not already been
installed before installing its protocols. This prevents the case
where loading it as an external driver (either manually, through
Driver#### variables, etc.) will refuse to add a second provider of
the API.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Peter Jones <pjones@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
VerifySignature can be implemented using a mirror of the
AuthenticodeVerify function that's already in use in the
ImageVerificationDXE environment, so this patch simply wires up
VerifySignature using that code.
<NOTE: Only Authenticode-signature verification was supported by
this VerifySignature() implementation now.)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Merge the code to MachineCheck.c file, remove this file.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
GetProcessorLocationByApicId ()
- Use max possible thread count to decode InitialApicId on AMD processor.
- Clean-up on C Coding standards.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Per build spec,the default set of flags for -Y option include 'HASH',
so this patch to update the help info.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Update InternalAllocateAlignedPages to use PeiServicesFreePages.
Let the InternalAllocateAlignedPages in PeiMemoryAllocationLib use
same algorithm with InternalAllocateAlignedPages in
UefiMemoryAllocationLib.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Support pre memory page allocation.
Support FreePages.
Allocation made prior to permanent memory will be
migrated to permanent memory and the HOB updated.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <Ruiyu.Ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Follow PI 1.6 spec to add FreePages definition and comments for
AllocatePages that will support pre permanent memory page allocation.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PI 1.6 has supported pre permanent memory page allocation,
to make sure the allocated memory is physical memory for DMA,
the patch is to check memory discovered PPI installed or not first
before calling AllocatePages.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
V3 changes:
Add detailed description for the usage of the Pcd in package DEC file.
Update the comment for the introduced Pcd in module INF files.
V2 changes:
Instead of using a global variable, use a Pcd for transfer protocol
revision.
Previously, the revision of the debug agent transfer protocol is
reflected by a macro.
This commit introduces a Pcd to reflect the revision in order to avoid the
comparison of two macros, which will generate a constant result detected
by code checkers.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
VirtioGpuDxe is now IOMMU-clean; it translates system memory addresses to
bus master device addresses. Negotiate VIRTIO_F_IOMMU_PLATFORM in parallel
with VIRTIO_F_VERSION_1. (Note: the VirtIo GPU device, and this driver,
are virtio-1.0 only (a.k.a. "modern-only").)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
VirtioGpuDxe is a UEFI Bus driver (not a Device driver). This is because a
UEFI graphics driver is expected to produce its GraphicsOutput protocol
instance(s) on new child handle(s) of the video controller handle, one
child handle (plus GOP) per video output (or, one child handle plus GOP
per combination of multiple video outputs).
In VirtioGpuDxe, we support a single VirtIo GPU head (scanout), namely
head#0. This means that, with regard to a specific VirtIo GPU device, the
driver may be in one of three states, at any time:
[1] VirtioGpuDxe has not bound the device at all,
[2] VirtioGpuDxe has bound the device, but not produced the sole child
handle for head#0,
[3] VirtioGpuDxe has bound the device, and produced the sole child handle
for head#0, with a GOP instance on the child handle.
(Which state the driver is in wrt. a given VirtIo GPU device depends on
the VirtioGpuDriverBindingStart() / VirtioGpuDriverBindingStop()
invocations issued by the ConnectController() / DisconnectController()
boot services. In turn those come from BDS or e.g. the UEFI shell.)
The concept of "current video mode" is technically tied to the GOP (i.e.,
the child handle, state [3] only), not the VirtIo GPU controller handle.
This is why we manage the storage that backs the current video mode in our
EFI_GRAPHICS_OUTPUT_PROTOCOL.SetMode() member implementation.
GopSetMode() is first called *internally*, when we enter state [3] (that
is, when we produce the child handle + GOP on it):
VirtioGpuDriverBindingStart() [DriverBinding.c]
InitVgpuGop() [DriverBinding.c]
VgpuGop->Gop.SetMode() [Gop.c]
When this happens, we allocate the backing store *without* having a
preexistent backing store (due to no preexistent video mode and GOP).
Skipping VirtIo GPU details not relevant for this patch, we just note that
the backing store is exposed *permanently* to the VirtIo GPU device, with
the RESOURCE_ATTACH_BACKING command.
When external clients call the EFI_GRAPHICS_OUTPUT_PROTOCOL.Blt() member
function -- called GopBlt() in this driver --, in state [3], the function
operates on the backing store, and sends only small messages to the VirtIo
GPU device.
When external clients call GopSetMode() for switching between video modes
-- in state [3] --, then
- a new backing store is allocated and exposed to the device (attached to
a new host-side VirtIo GPU resource),
- head#0 is flipped to the new backing store,
- on success, the ReleaseGopResources() function both detaches the
previous backing store from the VirtIo GPU device, an releases it. The
new backing store address and size are saved in our GOP object. (In
other words, we "commit" to the new video mode.)
When the DisconnectController() boot service asks us to leave state [3] --
we can leave it directly only for state [2] --, then the
ReleaseGopResources() function is called on a different path:
VirtioGpuDriverBindingStop() [DriverBinding.c]
UninitVgpuGop() [DriverBinding.c]
ReleaseGopResources() [Gop.c]
In this case, the backing store being released is still in use (we're not
leaving it for a new mode -- head#0 has not been flipped "away" from it),
so in ReleaseGopResources() we disable head#0 first.
(The ReleaseGopResources() function is called the same way on the error
path in InitVgpuGop(), if the first -- internal -- VgpuGop->Gop.SetMode()
call succeeds, but the rest of InitVgpuGop() fails.)
Based on the above, for IOMMU-compatibility,
- in GopSetMode(), don't just allocate, but also map the backing store of
the nascent video mode to a device address, for bus master common buffer
operation,
- (the VirtioGpuAllocateZeroAndMapBackingStore() helper function
introduced in the last patch takes care of zeroing internally,)
- pass the device address to the VirtIo GPU device in the
RESOURCE_ATTACH_BACKING command,
- if GopSetMode() succeeds, save the mapping token,
- if GopSetMode() fails, don't just free but also unmap the still-born
backing store,
- in ReleaseGopResources(), don't just free but also unmap the backing
store -- which is the previous backing store if we're mode-switching,
and the current backing store if we're leaving state [3].
Finally, ExitBootServices() may be called when the driver is in either
state [1], [2] or [3], wrt. a given VirtIo GPU device. (Of course we are
only notified in states [2] and [3].) If we get the notification in state
[3], then the current video mode's backing store has to be unmapped, but
not released. (We must not change the UEFI memory map.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Introduce the VirtioGpuAllocateZeroAndMapBackingStore() and
VirtioGpuUnmapAndFreeBackingStore() helper functions. These functions tie
together the allocation, zeroing and mapping, and unmapping and
deallocation, respectively, of memory that the virtio GPU will permanently
reference after receiving the RESOURCE_ATTACH_BACKING command.
With these functions we can keep the next patch simpler -- the GOP
implementation in "Gop.c" retains its error handling structure, and
remains oblivious to VIRTIO_DEVICE_PROTOCOL and VirtioLib.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
The RESOURCE_ATTACH_BACKING virtio GPU command assigns guest-side backing
pages to a host-side resource that was created earlier with the
RESOURCE_CREATE_2D command.
We compose the RESOURCE_ATTACH_BACKING command in the
VirtioGpuResourceAttachBacking() function. Currently this function takes
the parameter
IN VOID *FirstBackingPage
This is only appropriate as long as we pass a (guest-phys) system memory
address to the device. In preparation for a mapped bus master device
address, change the above parameter to
IN EFI_PHYSICAL_ADDRESS BackingStoreDeviceAddress
In order to keep the current call site functional, move the (VOID*) to
(UINTN) conversion out of the function, to the call site.
The "Request.Entry.Addr" field already has type UINT64.
This patch is similar to commit 4b725858de ("OvmfPkg/VirtioLib: change
the parameter of VirtioAppendDesc() to UINT64", 2017-08-23).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Every virtio GPU command used by VirtioGpuDxe is synchronous and formatted
as a two-descriptor chain: request, response. The internal workhorse
function that all the command-specific functions call for such messaging
is VirtioGpuSendCommand().
In VirtioGpuSendCommand(), map the request from system memory to bus
master device address for BusMasterRead operation, and map the response
from system memory to bus master device address for BusMasterWrite
operation.
Pass the bus master device addresses to VirtioAppendDesc(). (See also
commit 4b725858de, "OvmfPkg/VirtioLib: change the parameter of
VirtioAppendDesc() to UINT64", 2017-08-23.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
VirtioGpuDxe uses one virtio ring, for VIRTIO_GPU_CONTROL_QUEUE.
Map it for bus master common buffer operation with VirtioRingMap(), so
that it can be accessed equally by both guest and hypervisor even if an
IOMMU is used. (VirtioRingInit() already allocates the ring suitably for
this, see commit b0338c5329, "OvmfPkg/VirtioLib: alloc VRING buffer with
AllocateSharedPages()", 2017-08-23).
Pass the resultant translation offset ("RingBaseShift"), from system
memory address to bus master device address, to VIRTIO_SET_QUEUE_ADDRESS.
Unmap the ring in all contexts where the ring becomes unused (these
contexts are mutually exclusive):
- in VirtioGpuInit(): the ring has been mapped, but we cannot complete the
virtio initialization for another reason,
- in VirtioGpuUninit(): the virtio initialization has succeeded, but
VirtioGpuDriverBindingStart() fails for another reason, or
VirtioGpuDriverBindingStop() unbinds the device after use,
- in VirtioGpuExitBoot(): ExitBootServices() is called after
VirtioGpuDriverBindingStart() has successfully bound the device.
(Unmapping the ring does not change the UEFI memory map.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Log all relevant IN and IN OUT parameters on entry.
(Note that the HostAddress parameter is IN OUT rather than OUT due to
historical reasons. The "IN EFI_ALLOCATE_TYPE Type" parameter is now to be
ignored, but historically it could be set to AllocateMaxAddress for
example, and for that HostAddress had to be IN OUT.)
When exiting with success, log all relevant OUT parameters (i.e.,
HostAddress). Also log the new (internal) StashBuffer address, on which
IoMmuMap() and IoMmuUnmap() rely on, for BusMasterCommonBuffer operations
(in-place decryption and encryption, respectively).
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
The only important external information for this function, and for the
human looking at the log, is the Mapping input parameter. Log it on entry.
Stop logging the contents of the MAP_INFO structure pointed-to by Mapping.
Thanks to the previous patch, we can now associate IoMmuUnmap() messages
with IoMmuMap() messages -- and thereby with MAP_INFO contents -- purely
via Mapping.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Log all relevant IN and IN OUT parameters on entry.
When exiting with success, log all relevant OUT and IN OUT parameters.
Don't log OUT and IN OUT parameters that are never set or changed after
entering the function (i.e., *NumberOfBytes).
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Debug messages that start as natural (English) language phrases (after the
debug prefix) should uniformly begin with lower-case or upper-case. In
SetMemoryEncDec() we have a mixture now. Stick with lower-case.
(Upper-case is better for full sentences that also end with punctuation.)
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
In SetMemoryEncDec(), we have four locations where we (a) log a message on
the DEBUG_WARN level that says "ERROR", (b) return the status code
RETURN_NO_MAPPING right after.
These messages clearly describe actual errors (bad PML4, PDPE, PDE, PTE).
Promote their debug levels to DEBUG_ERROR, and remove the word "ERROR"
from the messages.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
In the SetMemoryEncDec() function, the way we currently report
PhysicalAddress is not uniform:
- mostly we say "for %lx",
- in one spot we say "at %lx" (even though the 2MB page being split does
not live *at* PhysicalAddress, instead it maps PhysicalAddress),
- in another spot we don't log PhysicalAddress at all (when splitting a
1GB page).
Unify this, using the format string "for Physical=0x%Lx".
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
None of the DEBUG macro invocations in SetMemoryEncDec() fit on a single
line. Break them to multiple lines, for (a) conforming to the coding style
spec, (b) easier modification in later patches.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Now that we have a generic DmaLib implementation for non-coherent DMA,
let's get rid of the ARM specific one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
We are not recieving the response from memory card after
sending CMD 12. It was not resulting in any failure but
we should recieve response after sending a command.
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
VirtioScsiDxe driver has been updated to use IOMMU-like member functions
from VIRTIO_DEVICE_PROTOCOL to translate the system physical address to
device address. We do not need to do anything special when
VIRTIO_F_IOMMU_PLATFORM bit is present hence treat it in parallel with
VIRTIO_F_VERSION_1.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
When device is behind the IOMMU, driver is require to pass the device
address of virtio request, response and any memory referenced by those
request/response to the bus master.
The patch uses IOMMU-like member functions from VIRTIO_DEVICE_PROTOCOL to
map request and response buffers system physical address to the device
address.
- If the buffer need to be accessed by both the processor and a bus
master then map with BusMasterCommonBuffer.
- If the buffer need to be accessed for a write operation by a bus master
then map with BusMasterWrite.
However, after a BusMasterWrite Unmap() failure, error reporting via
EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET would be very complex,
therefore we map such buffers too with BusMasterCommonBuffer.
- If the buffer need to be accessed for a read operation by a bus master
then map with BusMasterRead.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: restore lost sentence/paragraph in commit message]
[lersek@redhat.com: reindent/reflow "InDataBuffer" comment block]
[lersek@redhat.com: cast arg, not result, of EFI_SIZE_TO_PAGES() to UINTN]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
When virtio request fails we return EFI_DEVICE_ERROR, as per the spec
EFI_EXT_SCSI_PASS_THRU_PROTOCOL.PassThru() member function is required
to implement elaborated error reporting.
The patch refactors out entire block of the code that creates the host
adapter error into a separate helper function (ReportHostAdapterError).
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: fix style & typo in ReportHostAdapterError() comment]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Now that ArmDmaLib can take care of its own memory allocation needs,
let's get rid of UncachedMemoryAllocationLib entirely. This forces
platforms to declare the required semantics (non-cache coherent DMA,
whichever way it is implemented), rather than using uncached memory
allocations directly, which may not always be the right choice, and
prevents sharing of drivers between platforms if one is cache coherent
and the other is not.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
While modern AARCH64 server systems use ACPI for describing the platform
topology to the OS, ARM systems and AARCH64 outside of the server space
mostly use device tree binaries, which are compiled from device tree
source files using the device tree compiler.
Currently, such source files and binaries may be kept in the EDK2 platform
trees, but are not integrated with the build, which means they need to be
kept in sync and recompiled manually, which is cumbersome.
So let's wire up BaseTools support for them: add tool definitions for the
DTC compiler and preprocessor flags that allow these source files to use
FixedPcd expressions and other macros defined by AutoGen.h
This way, a device tree binary can be built from source and emitted into
a FFS file automatically using something like:
DeviceTree.inf:
[Defines]
INF_VERSION = 0x00010019
BASE_NAME = SomePlatformDeviceTree
FILE_GUID = 25462CDA-221F-47DF-AC1D-259CFAA4E326 # gDtPlatformDefaultDtbFileGuid
MODULE_TYPE = USER_DEFINED
VERSION_STRING = 1.0
[Sources]
SomePlatform.dts
[Packages]
MdePkg/MdePkg.dec
SomePlatform.fdf:
INF RuleOverride = DTB xxx/yyy/DeviceTree.inf
[Rule.Common.USER_DEFINED.DTB]
FILE FREEFORM = $(NAMED_GUID) {
RAW BIN |.dtb
}
where it can be picked at runtime by the DTB loader that may refer to it
using gDtPlatformDefaultDtbFileGuid.
Note that this is very similar to how ACPI tables may be emitted into a
FFS file with a known GUID and picked up by AcpiTableDxe at runtime.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PI has description said If an AP is enabled, then the implementation must
guarantee that a complete initialization sequence is performed on the AP,
so the AP is in a state that is compatible with an MP operating system.
Current implementation just set the AP to idle state when enable this AP
which is not follow spec. This patch fix it.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
when "RequestIsWrite" is FALSE -- i.e., the CPU wants data from
the device, we map "Buffer" for VirtioOperationBusMasterWrite. In
this case, checking the return status of
Dev->VirtIo->UnmapSharedBuffer (Dev->VirtIo, BufferMapping);
is must. If the unmapping fails, then "Buffer" will not contain the
actual data from the device, and we must fail the request with
EFI_DEVICE_ERROR.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: fix typos in subject]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Replace the reference to the ARM specific ArmDmaLib with a reference
to the generic NonCoherentDmaLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Replace the reference to the ARM specific ArmDmaLib with a reference
to the generic NonCoherentDmaLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The non-coherent DmaLib implementation in ArmDmaLib no longer relies on
anything in ArmPkg. So clone it into EmbeddedPkg, and rename it to
NonCoherentDmaLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Bring CoherentDmaLib in line with ArmDmaLib, and add support for
defining a static offset between the host's and the bus master's
view of memory.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The name NullDmaLib suggests that this library is a placeholder that
only exists to fulfil formal dependencies on the DmaLib library class
without providing an actual implementation. This is not the case, though:
NullDmaLib does implement DmaLib fully, but doing so simply requires very
little effort on a cache coherent platform. So let's rename it to
CoherentDmaLib instead.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
EmbeddedPkg should be architecture agnostic, but a few issues were
preventing other architectures to build individual components directly
from the .dsc:
- The AndroidBoot/AndroidFastBoot support have a dependency on BdsLib,
which only has resolutions for ARM/AARCH64. Move them to an
arch-restricted Components section.
- The Isp1761UsbDxe driver is not 64-bit compatible. It should be
converted to UEFI driver model, but for now just move it to a new
Components.ARM section. (Also delete non-useful declaration for
AARCH64 in EmbeddedPkg.dec.)
- Lan9118Dxe has an unused ArmLib entry. Drop it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In this sample driver, if (0) {...} else {...} statements were used to
illustrate two different using scenarios.
This comment refines the coding style by substituting the 'if (0)'
statement with comments to select sample codes for different cases.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This driver does not rely on DmaLib at all, so don't declare it as a
dependency.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The virt targets never use non-coherent DMA, so there is no point
in having a shared DmaLib library class resolution pointing to
ArmDmaLib. So drop it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Some commands may cause current directory or even current mapping
become invalid. For example, "MAP" after unplugging the USB thumb
key may cause current mapping "FS0:" disappear.
This patch updates the CWD and current mapping when commands return.
It also causes the command prompt change to default "Shell>".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Huajing Li <huajing.li@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by Jaben Carsey <jaben.carsey@intel.com>
When "map -r" runs, the mapping list is re-created but
gShellCurMapping still points to the old mapping list which
is already destroyed.
The patch updates the gShellCurMapping to point to the correct
location in the new mapping list.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Huajing Li <huajing.li@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by Jaben Carsey <jaben.carsey@intel.com>
There's a small window between
- AllocFwCfgDmaAccessBuffer() mapping the new FW_CFG_DMA_ACCESS object for
common buffer operation (i.e., decrypting it), and
- InternalQemuFwCfgDmaBytes() setting the fields of the object.
In this window, earlier garbage in the object is "leaked" to the
hypervisor. So zero the object before we decrypt it.
(This commit message references AMD SEV directly, because QemuFwCfgDxeLib
is not *generally* enabled for IOMMU operation just yet, unlike our goal
for the virtio infrastructure. Instead, QemuFwCfgDxeLib uses
MemEncryptSevLib explicitly to detect SEV, and then relies on IOMMU
protocol behavior that is specific to SEV. At this point, this is by
design.)
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Remove a false dependency on UncachedMemoryAllocationLib, and fix the
broken build while we're at it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
ArmDmaLib no longer depends on UncachedMemoryAllocationLib, so we can
remove the library class resolutions for it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
DmaLib's purpose is to manage memory that is shared between the host
and DMA capable devices. In some cases, this requires a larger alignment
than page size, and we currently don't cater for that in DmaLib. So add
a variant of DmaAllocateBuffer () that takes an alignment parameter.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=681
For string opcode,when checking the valid string length,
it should exclude the Null-terminated character.
And for string in NameValue storage, need to exclude
the varname and also need to convert the Config string
length to Unicode string length.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
In PI 1.5 version, system management mode name(SMM) has been changed
to Management Mode(MM). It impacts the current code which still use
SMM/Smram/SMI keywords. This patch update the original files which
related to old SMM modules, also keep the compatible with old SMM
related drivers.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In PI 1.5 version, system management mode name(SMM) has been changed
to Management Mode(MM). It impacts the current code which still use
SMM/Smram/SMI keywords. This patch add new definition which use
MM/MmRam/MMI keywords to follow new spec definitions.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When EDK_TOOLS_BIN is not set, %EDK_TOOLS_PATH%\Bin\Win32 will be used as the
binary tool directory. But, %EDK_TOOLS_PATH%\Bin\Win32 may not exist. On this
case, toolsetup.bat should continue to do the other setting, such VS tool
chain and tool conf file copy.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=582
Don't enable this option in the default setting, because it may cause VS2015
linker crash. Platform can enable this option in PlatformPkg.dsc like below:
[BuildOptions]
*_*_*_DLINK2_FLAGS = /WHOLEARCHIVE
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Originally (before 714c260301),
mPhysicalAddressBits was only defined in X64 PageTbl.c, after
714c260301, mPhysicalAddressBits is
also defined in Ia32 PageTbl.c, then mPhysicalAddressBits is used in
ConvertMemoryPageAttributes() for address check.
This patch is to centralize mPhysicalAddressBits definition to
PiSmmCpuDxeSmm.c from Ia32 and X64 PageTbl.c.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
VirtioBlkDxe driver has been updated to use IOMMU-like member functions
from VIRTIO_DEVICE_PROTOCOL to translate the system physical address to
device address. We do not need to do anything special when
VIRTIO_F_IOMMU_PLATFORM bit is present hence treat it in parallel with
VIRTIO_F_VERSION_1.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
When device is behind the IOMMU, driver is require to pass the device
address of virtio request, response and any memory referenced by those
request/response to the bus master.
The patch uses IOMMU-like member functions from VIRTIO_DEVICE_PROTOCOL to
map request and response buffers system physical address to the device
address.
- If the buffer need to be accessed by both the processor and a bus
master then map with BusMasterCommonBuffer.
- If the buffer need to be accessed for a write operation by a bus master
then map with BusMasterWrite.
- If the buffer need to be accessed for a read operation by a bus master
then map with BusMasterRead.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
When device is behind the IOMMU then driver need to pass the device
address when programing the bus master. The patch uses VirtioRingMap() to
map the VRING system physical address to device address.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
The patch adds the new library class S3PciSegmentLib to carry out
PCI configuration and enable the PCI operations to be replayed during
an S3 resume. This library class maps directly on top of the
PciSegmentLib class.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The patch adds two PciSegmentLib instances that consumes
PciSegmentInfoLib to provide multiple segments PCI configuration
access.
BasePciSegmentLibSegmentInfo instance is a BASE library.
DxeRuntimePciSegmentLibSegmentInfo instance is to be linked with
runtime drivers to provide not only boot time but also runtime
PCI configuration access.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The patch adds PciSegmentInfoLib library class which is used
by PciSegmentLib (commit in next patch) to support multiple
segment PCI configuration access.
BasePciSegmentInfoLibNull instance is added but it shouldn't be
used by any real platform.
Any single segment platform that wants to use PciSegmentLib could
use BasePciSegmentLibPci instance.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The patch adds new macro PCI_ECAM_ADDRESS into PciExpress21.h,
to align to the PCIE spec, and also update PciExpressLib.h to
redirect PCI_EXPRESS_LIB_ADDRESS to the new macro.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add sample for device scope based exception list
and PCI vendor id based exception list.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
1. Handle flexible exception list format.
1.1 Handle DeviceScope based device info.
1.2 Handle PciDeviceId based device info.
2. Reorg the PCI_DEVICE_INFORMATION
2.1 Merge data pointer reduce allocation times
2.2 Add PCI device id to PCI_DEVICE_INFORMATION
2.3 Rename PciDescriptor to avoid confusing.
3. Fix the debug message too long issue.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Add flexible exception list format:
1) Support Device scope based reporting:
Such as, Seg:0/StartBus:0/(Dev:1C|Func:0)/(Dev:0|Func:0)
2) Support PCI VendorId/DeviceId based reporting
Such as, VID:8086|DID:9D2F|Rev:21|SVID:8086|SDID:7270
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Original code about Local Machine Check exception feature saves in a
discrete file, because features related to machine check architecture
all saved in MachineCheck.c file. This patch moved LMCE logic to same
file for easy maintenance.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Add CPUID check to see if the CPU supports the Machine Check
Architecture before accessing the Machine Check Architecture
related MSRs.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
mLegacyBootOptionPrivate pointer is initialized in Constructor function
with if condition check, but it's used in Destructor function directly
without any check. Now add the NULL pointer check.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
These two definitions have redundant definition which can be handle by code.
This patch update them to follow new code definitions.
V2: Add more comments for the PCDs and keep consistent in .dec and .uni files.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
The EnumProcTraceMemDisable/OutputSchemeInvalid are redundant
definitions. These definitions can be handled by other code,
so remove them.
V2: Change enum members name.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
When update MSR values, current code use BITxx to modify it. Enhance the code
to use corresponding MSR's data structures to make it more user friendly.
V2: Move architecturalMsr.h file. definition to architecturalMsr.h file.
Use structure members to do value assignment.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Current calculate timeout logic may have overflow if the input
timeout value too large. This patch fix this potential overflow
issue.
V2: Use local variable instead of call GetPerformanceCounterProperties
twice. Also correct some comments.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=624 reports
memory protection crash in PiSmmCpuDxeSmm, Ia32 build with
RAM above 4GB (of which 2GB are placed in 64-bit address).
It is because UEFI builds identity mapping page tables,
>4G address is not supported at Ia32 build.
This patch is to get the PhysicalAddressBits that is used
to build in PageTbl.c(Ia32/X64), and use it to check whether
the address is supported or not in ConvertMemoryPageAttributes().
With this patch, the debug messages will be like below.
UefiMemory protection: 0x0 - 0x9F000 Success
UefiMemory protection: 0x100000 - 0x807000 Success
UefiMemory protection: 0x808000 - 0x810000 Success
UefiMemory protection: 0x818000 - 0x820000 Success
UefiMemory protection: 0x1510000 - 0x7B798000 Success
UefiMemory protection: 0x7B79B000 - 0x7E538000 Success
UefiMemory protection: 0x7E539000 - 0x7E545000 Success
UefiMemory protection: 0x7E55A000 - 0x7E61F000 Success
UefiMemory protection: 0x7E62B000 - 0x7F6AB000 Success
UefiMemory protection: 0x7F703000 - 0x7F70B000 Success
UefiMemory protection: 0x7F70F000 - 0x7F778000 Success
UefiMemory protection: 0x100000000 - 0x180000000 Unsupported
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Originally-suggested-by: Jiewen Yao <jiewen.yao@intel.com>
Reported-by: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
This is a patch to implement writing and dumping of PCI 3.0 Device ID
lists in EFI option ROMs in the EfiRom tool.
Using this modification, multiple space-delimited device IDs can be
specified after -i. The first device in the list is used for the main
PCI ROM header Device ID field and is also written in the list. The
list is only written when more than one device ID has been specified;
when only one device ID is given on the command line, the EfiRom output
should be identical to the current code.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=666
Cc: Liming Gao <liming.gao@intel.com>
Cc: Tomas Pilar <tpilar@solarflare.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
VirtioRngDxe driver has been updated to use IOMMU-like member functions
from VIRTIO_DEVICE_PROTOCOL to translate the system physical address to
device address. We do not need to do anything special when
VIRTIO_F_IOMMU_PLATFORM bit is present hence treat it in parallel with
VIRTIO_F_VERSION_1.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
We found there are loops of *2* Maps and only *1* Unmap and
the DMA buffer address is decreasing.
It is caused by the below code flow.
XhcAsyncInterruptTransfer ->
XhcCreateUrb ->
XhcCreateTransferTrb ->
Map Urb->DataMap (1)
Timer: loops of *2* Maps and only *1* Unmap
XhcMonitorAsyncRequests ->
XhcFlushAsyncIntMap ->
Unmap and Map Urb->DataMap (2)
XhcUpdateAsyncRequest ->
XhcCreateTransferTrb ->
Map Urb->DataMap (3)
This patch is to eliminate (3).
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
patch maps the host address to a device address for buffers (including
rings, device specifc request and response pointed by vring descriptor,
and any further memory reference by those request and response).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: return EFI_DEVICE_ERROR if mapping fails in GetRNG]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
The patch change the "BufferPhysAddr" parameter of VirtioAppendDesc()
from type UINTN to UINT64.
UINTN is appropriate as long as we pass system memory references. After
the introduction of bus master device addresses, that's no longer the case
in general. Should we implement "real" IOMMU support at some point, UINTN
could break in 32-bit builds of OVMF.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: clarify commit message]
[lersek@redhat.com: balance parens in VirtioAppendDesc() comment blocks]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
The VRING buffer is a communication area between guest and hypervisor.
Allocate it using VIRTIO_DEVICE_PROTOCOL.AllocateSharedPages() so that
it can be mapped later with VirtioRingMap() for bi-directional access.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: correct typo in VirtioRingInit() comment blocks]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Add a function to map the ring buffer with BusMasterCommonBuffer so that
ring can be accessed by both guest and hypervisor.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: fix typo in commit message]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
For the case when an IOMMU is used for translating system physical
addresses to DMA bus master addresses, the transport-independent
virtio device drivers will be required to map their VRING areas to
bus addresses with VIRTIO_DEVICE_PROTOCOL.MapSharedBuffer() calls.
- MMIO and legacy virtio transport do not support IOMMU to translate the
addresses hence RingBaseShift will always be set to zero.
- modern virtio transport supports IOMMU to translate the address, in
next patch we will update the Virtio10Dxe to use RingBaseShift offset.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: remove commit msg paragraph with VirtioLib reference]
[lersek@redhat.com: fix typo in VIRTIO_SET_QUEUE_ADDRESS comment block]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
The function can be used for mapping the system physical address to virtio
device address using VIRTIO_DEVICE_PROTOCOL.MapSharedBuffer (). The
function helps with centralizing error handling, and it allows the caller
to pass in constant or other evaluated expressions for NumberOfBytes.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: s/This/VirtIo/ in the new function's comment blocks]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
The patch extends VIRTIO_DEVICE_PROTOCOL to provide the following new
member functions:
- AllocateSharedPages : allocate a memory region suitable for sharing
between guest and hypervisor (e.g ring buffer).
- FreeSharedPages: free the memory allocated using AllocateSharedPages ().
- MapSharedBuffer: map a host address to device address suitable to share
with device for bus master operations.
- UnmapSharedBuffer: unmap the device address obtained through the
MapSharedBuffer().
We're free to extend the protocol structure without changing the protocol
GUID, or bumping any protocol version fields (of which we currently have
none), because VIRTIO_DEVICE_PROTOCOL is internal to edk2 by design --
see the disclaimers in "VirtioDevice.h".
The patch implements Laszlo's recommendation [1].
[1] http://mid.mail-archive.com/841bec5f-6f6e-8b1f-25ba-0fd37a915b72@redhat.com
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Add empty TempRamInitApi function to fix
build error with WHOLEARCHIVE option
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=671
GCC tool chain uses -fpie in CC_FLAGS. So, add -pie in DLINK_FLAGS.
More discussion in
https://lists.01.org/pipermail/edk2-devel/2017-August/013508.html
3.13 Options for Linking
========================
'-pie'
Produce a position independent executable on targets that support
it. For predictable results, you must also specify the same set
of options used for compilation ('-fpie', '-fPIE', or model
suboptions) when you specify this linker option.
3.18 Options for Code Generation Conventions
============================================
'-fpie'
'-fPIE'
These options are similar to '-fpic' and '-fPIC', but generated
position independent code can be only linked into executables.
Usually these options are used when '-pie' GCC option is used
during linking.
'-fpie' and '-fPIE' both define the macros '__pie__' and
'__PIE__'. The macros have the value 1 for '-fpie' and 2 for
'-fPIE'.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
A block of settings has been copied around ARM platforms for years.
These are consumed only by Ebl, and since none of the ArmVirtPkg
platforms use that, drop them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Now that ArmDmaLib no longer uses uncached mappings for short-lived
bounce buffers used for streaming DMA, the only place we allocate
uncached memory is in DmaAllocateBuffer (), which is used for static
mappings shared between the host and the device, e.g., for packet
descriptor rings etc.
There is no performance concern around such long lived mappings, and
so we can really do without the overhead of UncachedMemoryAllocationLib,
which is a sizable chunk of poorly maintained code that never actually
releases any memory, and despite the fact that it implements pool based
routines, it always performs page based allocations anyway.
So let's invoke the DXE services directly to manage memory attributes
on allocations, and keep track of the allocations in a linked list so
we can restore the attributes and free the memory properly after use.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Now that we have dropped QemuVideoDxe from all QEMU targeted builds
under ArmVirtPkg, we can revert the ARM specific changes to it.
This partially reverts commits 84a75f70e9 (SVN 16890) and
05a5379458.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
One of the reasons for introducing virtio-gpu support to OvmfPkg and
ArmVirtpkg was the fact that under KVM virtualization on ARM, the
legacy VGA cannot be used reliably. This is due to an implementation
detail of QEMU+KVM, which remaps cached host memory into the guest
address space as a framebuffer behind a PCI BAR. Given that the purpose
of a memory mapped framebuffer is its side effects, such BARs should
never be mapped cacheable in the guest, and the mismatched attributes
between host and guest result in a loss of coherency, visible as
corruption in the framebuffer image.
This issue does not occur under TCG emulation, nor did we expect it to
actually bring down the guest under KVM, and so it was deemed harmless
to keep support for the VGA device as well. However, as it turns out,
the fact that the framebuffer BAR is mapped using device semantics by
default may result in unalignment faults when we use the ordinary string
copy routines on the contents. In theory, we could work around this by
remapping the BAR as write combining, but it appears the generic PCI
bus driver does not actually implement this.
So let's remove the QemuVideoDxe driver altogether. This may result
in loss of functionality for use cases that rely on the framebuffer
to be directly addressable (such as EFIFB), but given that this never
worked reliably under KVM in the first place, let's not let that stop
us from dropping support for it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
https://lists.01.org/pipermail/edk2-devel/2017-August/013488.html
These fields are actually a GUID and DWORD respectively: the GUID identifies
the PDB to make it possible to verify that a given PDB matches the PE file,
and the DWORD is the "age" of the PDB which is simply a helper value that is
incremented by 1 by the linker every time the file is remade. Wiping the
GUID will cause PDB parsers (such as the MS DIA SDK that IDA and most other
tools use) to treat the PDB as a mismatch and refuse to load it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Add the implementation of HiiPopup protocol in DisplayEngineDxe,
since DisplayEngineDxe is responsible for drawing tasks.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add an android kernel loader that could load kernel from storage
device.
This android boot image BDS add addtitional cmdline/dtb/ramfs
support besides kernel that is introduced by Android boot header.
This patch is derived from Haojian's code as below link.
https://patches.linaro.org/patch/94683/
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The SPC-4 says about INQUIRY,
> In response to an INQUIRY command received by an incorrect logical unit,
> the SCSI target device shall return the INQUIRY data with the peripheral
> qualifier set to the value defined in 6.4.2. The INQUIRY command shall
> return CHECK CONDITION status only when the device server is unable to
> return the requested INQUIRY data.
When a device server takes the second branch, and returns CHECK CONDITION
for a nonexistent LUN, the InquiryData structure in the
DiscoverScsiDevice() function remains filled with the original zeros.
DiscoverScsiDevice() then sees zero in both Peripheral_Qualifier and
Peripheral_Type, and therefore ScsiBusDxe produces a ScsiIo protocol
instance with device type zero, for the nonexistent LUN.
Device type zero is EFI_SCSI_TYPE_DISK. Thus ScsiDiskDxe binds the bogus
ScsiIo protocol interface, and produces a similarly bogus BlockIo
interface on top. This ripples up to BDS, where UefiBootManagerLib can
auto-generate bogus UEFI boot options for the nonexistent LUNs.
This has been encountered with QEMU, after commit ded6ddc5a7b9 ("scsi:
clarify sense codes for LUN0 emulation", 2017-08-04). QEMU now answers
INQUIRY commands that were directed to nonexistent LUNs with:
> DiscoverScsiDevice:1361: Lun=2 HostAdapterStatus=0 TargetStatus=2
> SenseDataLength=18 InquiryDataLength=96
> Sense {
> Sense 000000 70 00 05 00 00 00 00 0A 00 00 00 00 25 00 00 00
> Sense 000010 00 00
> Sense }
> Inquiry {
> Inquiry 000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> Inquiry 000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> Inquiry 000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> Inquiry 000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> Inquiry 000040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> Inquiry 000050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> Inquiry }
The interesting fields are:
- HostAdapterStatus=0 (OK),
- TargetStatus=2 (CHECK CONDITION),
- Sense/Error_Code=0x70 (Current error, Fixed description)
- Sense/Sense_Key=0x05 (ILLEGAL REQUEST)
According to SPC-4 "Table 41 -- Sense key descriptions (part 2 of 2)",
ILLEGAL REQUEST is justified when "the command was addressed to an
incorrect logical unit number".
Thus, recognize this kind of answer for nonexistent LUNs.
(
Checking the status fields and the sense data is justified anyway,
according to the documentation of ScsiInquiryCommand():
> @retval EFI_SUCCESS The command was executed
> successfully. See
> HostAdapterStatus,
> TargetStatus, SenseDataLength,
> and SenseData in that order for
> additional status information.
)
Cc: Eric Dong <eric.dong@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The code after the "if" statement is only reachable if the first branch
with the "break" is not taken. Therefore we can move the "else" branch
after the "if" statement, simplifying the code.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The SPC-4 spec says about the INQUIRY data, in "Table 138 -- Peripheral
qualifier":
> Qualifier = 011b The device server is not capable of supporting a
> peripheral device on this logical unit. For this
> peripheral qualifier the peripheral device type shall
> be set to 1Fh. All other peripheral device type values
> are reserved for this peripheral qualifier.
Accordingly, the DiscoverScsiDevice() function returns FALSE if
Peripheral_Qualifier is 3 decimal, but Peripheral_Type differs from 1Fh.
This is a valid sanity check -- such combinations are reserved.
When Peripheral_Qualifier is 3, and Peripheral_Type is 1Fh, then
DiscoverScsiDevice() returns TRUE. While this combination is not reserved,
returning TRUE for it is incorrect: Peripheral_Type 1Fh stands for
"Unknown or no device type", and this combination is returned in
particular when the INQUIRY command was directed to a nonexistent LUN.
Quoting the spec:
> In response to an INQUIRY command received by an incorrect logical unit,
> the SCSI target device shall return the INQUIRY data with the peripheral
> qualifier set to the value defined in 6.4.2. [...]
>
> [...]
>
> The PERIPHERAL QUALIFIER field and PERIPHERAL DEVICE TYPE field identify
> the peripheral device connected to the logical unit. If the SCSI target
> device is not capable of supporting a peripheral device connected to
> this logical unit, the device server shall set these fields to 7Fh
> (i.e., PERIPHERAL QUALIFIER field set to 011b and PERIPHERAL DEVICE TYPE
> field set to 1Fh).
The consequence of this bug is that for each nonexistent Target/LUN pair,
we produce a useless ScsiIo protocol interface. The internal
"ScsiIoDevice->ScsiDeviceType" field will be set to 0x1f, and it will be
returned to higher-level SCSI drivers when they call
ScsiIo->GetDeviceType().
Given that 0x1f means "Unknown or no device type", no higher-level driver
can ever support it, so these ScsiIo protocol interfaces are useless.
The fix is to return FALSE for the (Peripheral_Qualifier=3,
Peripheral_Type=0x1f) combination. With that however we reject the whole
Peripheral_Qualifier=3 space (justifiedly -- see the definition above),
which lets us simplify the code.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The ArmPkg implementation of DmaLib uses double buffering to ensure
that any attempt to perform non-coherent DMA on unaligned buffers cannot
corrupt adjacent unrelated data which happens to share cachelines with
the data we are exchanging with the device.
Such corruption can only occur on bus master write, in which case we have
to invalidate the caches to ensure the CPU will see the data written to
memory by the device. In the bus master read case, we can simply clean
and invalidate at the same time, which may purge unrelated adjacent data
from the caches, but will not corrupt its contents.
Also, this double buffer does not necessarily have to be allocated from
uncached memory: by the same reasoning, we can perform cache invalidation
on an ordinary pool allocation as long as we take the same alignment
constraints into account.
So update our code accordingly: remove double buffering from the bus
master read path, and switch to a pool allocation for the double buffer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
With the SerialDxe change in commit 4cf3f37c87 ("MdeModulePkg SerialDxe:
Process timeout consistently in SerialRead", 2017-07-18), setting
EFI_SERIAL_INPUT_BUFFER_EMPTY in the "Control" output parameter, in the
GetControl() SerialPortLib function, is no longer a "small optimization".
Namely, due to the SerialDxe change, the GetOneKeyFromSerial() call in
TerminalDxe's TerminalConInTimerHandler() can take very long if the input
queue is empty, even if GetOneKeyFromSerial()'s return value causes the
loop to be exited right after, in the first iteration.
This issue causes a boot hang in ArmVirtQemu: with the input queue empty,
TerminalConInTimerHandler() takes so long to return that, by the time it
returns, there's another execution queued already (due to the associated
timer event being signaled meanwhile). The boot process is stuck in the
timer event handler.
Therefore even the first GetOneKeyFromSerial() iteration must be prevented
in TerminalConInTimerHandler() if the input queue is empty, and that
requires implementing GetControl() for real.
Implement the SetAttributes(), SetControl() and GetControl() APIs (of
SerialPortExtLib origin) in FdtPL011SerialPortLib with calls to matching
PL011UartLib functions. This follows the example of
"ArmPlatformPkg/Library/PL011SerialPortLib" and also matches Star's
original idea under [1].
The patch can be considered a continuation of commit ad7f6bc2e1
("ArmVirtPkg: Use SerialDxe in MdeModulePkg instead of EmbeddedPkg",
2015-11-26), based on the mailing list threads [1] [2] [3].
[1] http://mid.mail-archive.com/1447752930-32880-12-git-send-email-star.zeng@intel.com
[2] http://mid.mail-archive.com/1448243067-1880-12-git-send-email-star.zeng@intel.com
[3] http://mid.mail-archive.com/b748580c-cb51-32c9-acf9-780841ef15da@redhat.com
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Heyi Guo <guoheyi@huawei.com>
Cc: Star Zeng <star.zeng@intel.com>
Originally-suggested-by: Star Zeng <star.zeng@intel.com>
Reported-by: Brijesh Singh <brijesh.singh@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When UefiCpuPkg/MpInitLib is built for X64 with gcc-7, using the DEBUG
build target and the GCC5 toolchain settings, a C-language assignment is
miscompiled such that the initial AP startup hangs in CpuMpPei (X64) or
CpuDxe (Ia32X64). See <https://bugzilla.tianocore.org/show_bug.cgi?id=671>
for a detailed analysis of the symptoms, and for mailing list links.
This issue has been reported several times (one example is
<https://bugzilla.tianocore.org/show_bug.cgi?id=657>). Until we (or the
upstream gcc developers) figure out how to dissuade gcc-7 from the
miscompilation, pick the GCC49 toolchain in "build.sh" for gcc-7.*.
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In commit 4ad5f59715, the parameters
of some functions have been updated, but miss to update the comments
accordingly. This patch is to update the function comments.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
As part of commit 5f82e02, ActiveRecordInDb was introduced as a copy
of RecordInDb as latter may be freed by the callback function. This
commit replaces an access of RecordInDb after the callback function
has been executed with an access to ActiveRecordInDb.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Kelly Steele <kelly.steele@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Current code allocate buffer for the pointer which later get value
from PCD database. but current code error use "=" for this case.
Use AllocateCopyPool instead to fix it.
V2 enhanced to directly use AllocateCopyPool to get the PCD value.
V3 enhanced to avoid using local temp variable.
V4 enhanced to keep the functions to get the pcd values.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Shao Ming <ming.shao@intel.com>
Cc: Kinney Michael D <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Kinney Michael D <michael.d.kinney@intel.com>
Although everyone is encouraged to review patches and add their
Reviewed-by reply for a patch, with the Package Reviewer role we
identify additional community members that will be Cc'd for patches
made to a package.
A distinction between a Package Maintainer and Reviewer is that
Maintainers will always have source control push access to the package
whereas Reviewers will not. (The Reviewer may have push access if they
are also Package Maintainer for another package.)
Currently we have an limit of 2 Package Maintainers per package, but
the Package Maintainers for each package decide how to manage the
Package Reviewer list.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
V2: Use "license" instead of "BSD License"
V1: Use "FreeBSD" instead of "BSD"
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
1) Replace InternalBaseLibIsNodeInList() with
InternalBaseLibIsListValid().
- The verification whether Node is within the doubly-linked List
is now done by IsNodeInList().
- Whether the list is valid is returned.
2) The comments within InsertHeadList() and InsertTailList() stated
that it is checked whether Entry is not part of the doubly-linked
list. This was not done as argument 3 of
InternalBaseLibIsNodeInList() indicated whether the check is done,
not whether to check if the node is or is not in the list. This
has been fixed by using IsNodeInList() for the ASSERTs.
V2:
- Fix IsListEmpty() to ASSERT when the passed list is invalid.
- Introduce the VERIFY_IS_NODE_IN_LIST() macro to only verify whether the
passed node is part of the list when PcdVerifyNodeInList is TRUE.
V3:
- Introduce the ASSERT_VERIFY_NODE_IN_VALID_LIST() macro which,
depending on the value of PcdVerifyNodeInList, verifies whether
SecondEntry is or is not part of the same doubly-linked list as
FirstEntry and unconditionally verifies whether the doubly-linked
list FirstEntry is part of is valid. This prevents
InternalBaseLibIsListValid() from being called twice when a
function ASSERTs via the result of IsNodeInList(), as it calls
InternalBaseLibIsListValid() already.
- Remove the VERIFY_IS_NODE_IN_LIST() macro in favor of
ASSERT_VERIFY_NODE_IN_VALID_LIST().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch adds IsNodeInList() to BaseLib, which verifies the given
Node is part of the doubly-linked List provided.
V2:
- Rename "List" to "FirstEntry" and "Node" to "SecondEntry" to clarify that
"FirstEntry" does not need to be the doubly-linked list's head node.
V3:
- Remove ASSERTs from IsNodeInList() which are present in
InternalBaseLibIsListValid().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
UefiCpuLib inf file reference itself in [LibraryClasses]
section, this is not necessary. This patch remove it.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Ming Shao <ming.shao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Current debug message when enable/disable CPU feature not
correct. This patch enhances it to make it more accurate.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Shao, Ming <ming.shao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Add STD_ERROR flag to all output consoles that the Nt32
platform supports so all messages sent to the standard
error console device(s) are visible by default.
The Boot Maintenance Manager can be used to manually disable
standard error output to specific console devices.
UEFI Applications and UEFI Drivers are recommended to be
built with DEBUG() and ASSERT() messages sent to the standard
error device using MdePkg/Library/UefiDebugLibStdErr. Prior
to this change, a user would have to use the Boot Maintenance
Manager to configure a standard error console device to make
these messages visible.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Tested-by: Sunny Wang <sunnywang@hpe.com>
Current code always allocates/frees < 1MB WakeupBuffer for DxeMpLib
until ExitBootService, but the allocation may be failed at late
phase of the boot.
This patch is to always save/restore original WakeupBuffer for
DxeMpLib, it is aligned with the solution for PeiMpLib at
9293d6e42e, then AllocateResetVector()
and FreeResetVector() will be common and moved to MpLib.c.
Only difference is GetWakeupBuffer() that will be in PeiMpLib or
DxeMpLib respectively.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch is to improve IOMMU performance.
All WBINVD is removed due to performance issue.
CLFLUSH by WriteBackDataCacheRange() is used to
only flush the context table or
second level page table if they are changed.
This patch also removed some unused functions.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Init CustomCumulativeData.MinDur to PERF_MAXDUR, otherwise the
MinDur displayed for custom cumulative data will be always 0,
but not the real shortest duration.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Cinnamon Shia <cinnamon.shia@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Init CustomCumulativeData.MinDur to PERF_MAXDUR, otherwise the
MinDur displayed for custom cumulative data will be always 0,
but not the real shortest duration.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Cinnamon Shia <cinnamon.shia@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When double free pages by FreePages() or allocate allocated pages by
AllocatePages() with AllocateAddress type, the code will print debug
message "ConvertPages: Incompatible memory types", but the debug
message is not very obvious for the error paths by FreePages() or
AllocatePages().
Refer https://lists.01.org/pipermail/edk2-devel/2017-August/013075.html
for the discussion.
This patch is to enhance the debug message for the error paths by
FreePages() or AllocatePages.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=667
reported there is double free pages on LoadImage failure path.
CoreLoadPeImage()
...
return EFI_SUCCESS;
Done:
//
// Free memory.
//
if (DstBufAlocated) {
CoreFreePages (Image->ImageContext.ImageAddress, Image->NumberOfPages);
}
...
CoreUnloadAndCloseImage()
...
if ((Image->ImageBasePage != 0) && FreePage) {
CoreFreePages (Image->ImageBasePage, Image->NumberOfPages);
}
...
This patch is to follow the suggestion at
https://lists.01.org/pipermail/edk2-devel/2017-August/013112.html
to set Image->ImageContext.ImageAddress and Image->ImageBasePage to 0
after the free in CoreLoadPeImage().
Cc: Liming Gao <liming.gao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
it is a bug in mtoc setting the size of the debug directory entry to
the size of the .debug section, not the size of the
EFI_IMAGE_DEBUG_DIRECTORY_ENTRY. It was causing a loop to iterate and
get bogus EFI_IMAGE_DEBUG_DIRECTORY_ENTRY data and pass that to
memset() and boom.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Andrew Fish <afish@apple.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch is to update UEFI Boot manager to support DNS device path
for HTTP(S) network boot.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
V3 changes:
Add debug messages for new return path when successfully erase the
specified blocks. Refine logic for calculating the size for writing
zeros to device.
V2 changes:
The Trim command is not supported on all eMMC devices. For those devices
that do not support such command, add codes to handle the scenario.
Commit message:
The current implementation of the Erase Block Protocol service
EraseBlocks() uses the erase command. According to spec eMMC Electrical
Standard 5.1, Section 6.6.9:
The erasable unit of the eMMC is the "Erase Group"; Erase group is
measured in write blocks that are the basic writable units of the Device.
...
When the Erase is executed it will apply to all write blocks within an
erase group.
However, code logic in function EmmcEraseBlocks() does not check whether
the blocks to be erased form complete erase groups. Missing such checks
will lead to erasing extra data on the device.
This commit will:
a. If the device support the Trim command, use the Trim command to
perform the erase operations for eMMC devices.
According to the spec:
Unlike the Erase command, the Trim function applies the erase operation to
write blocks instead of erase groups.
b. If the device does not support the Trim command, use the Erase command
to erase the data in the erase groups. And write zeros to those blocks
that cannot form a complete erase group.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Per DEC spec, multiple section tag use <TS> to separate, and it can
support Tab, so this patch fix the bug to use Tab.
<TabSpace> ::= {<Tab>} {<Space>}
<TS> ::= <TabSpace>*
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yanyan Zhang <yanyanx.zhang@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
when the UI string is read from files, we don't need to add the extra
quotes. Otherwise, it will cause UI name has this extra quotes.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Bin Wang <binx.a.wang@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Add a new feature to UPT to support installing
multiple DIST packages in one time.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=670
Add the python script RunMakefile.py that can be used
in a PREBUILD/POSTBUIILD action to invoke a makefile
passing in context as makefile defines. The command
line arguments passed into RunMakefile.py are converted
to the following set of defines.
* ACTIVE_PLATFORM
* TARGET_ARCH
* TOOL_CHAIN_TAG
* CONF_DIRECTORY
* TARGET
* EXTRA_FLAGS
In addition, a makefile can access the system environment
variables including WORKSPACE and PACKAGES_PATH.
The makefile target from the following set is also passed
into the makefile. If no target is passed into build, then
the 'all' target is used.
[all|fds|genc|genmake|clean|cleanall|cleanlib|modules|libraries|run]
A platform DSC file can use a statements in the [Defines]
section of the following form to use this script. MAKEFILE
is a WORKSPACE or PACKAGES_PATH relative path to the makefile
to run.
[Defines]
PREBUILD = python BaseTools/Script/RunMakefile.py --makefile MAKEFILE
POSTBUILD = python BaseTools/Script/RunMakefile.py --makefile MAKEFILE
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=670
* Extend PREBUILD/POSTBUILD define values to support more than
one argument.
* Delay normalization of PREBUILD/POSTBUILD define values
until all arguments in the define values can be processed.
* Convert PREBUILD/POSTBUILD build define value arguments
that are WORKSPACE or PACKAGES_PATH relative paths to
absolute paths.
* Append -p PlatformFile, --conf=ConfDirectory, and build target
flags to command line used to execute PREBUILD/POSTBUILD
actions.
* Remove PrebuildScript and PostbuildScript fields from the
Build class and use Prebuild and Postbuild fields instead.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
UEFI Spec 2.7 adds the clarification on SetData interface usage to clear specific
individual data types. This patch is to support this feature.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
UEFI Spec 2.7 adds the clarification on SetData interface usage to clear specific
individual data types. This patch is to support this feature.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Update the comments of Ip4Config2/Ip6Config Protocol to consistent
with UEFI Spec 2.7, which provides the capability to clear specific
individual data types.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
There are VS2015 NOOPT IA32 build failure like below in IntelVTdDxe.
XXX.lib(XXX.obj) : error LNK2001: unresolved external symbol __allshl
XXX.lib(XXX.obj) : error LNK2001: unresolved external symbol __aullshr
This patch is to update Vtd.h to use UINT32 instead of UINT64 for
bitfields in structure definition, and also update IntelVTdDxe code
accordingly.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The following commit moved the QuarkSocBinPkg from the root
directory of the edk2-non-osi repository to the
Silicon/Intel directory.
182e85d045
The following updates are made to Readme.md:
* PACKAGES_PATH setting for edk2-non-osi directory changes
* Remove use of edk2-FatPkg repository
* Remove use of edk2-BaseTools-win32 repository
* Run python build tools from sources
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Kelly Steele <kelly.steele@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Kelly Steele <kelly.steele@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Map the use of memset() and memcpy() to the BaseMemoryLib
functions ZeroMem(), SetMem(), and CopyMem(). This fixes
GCC build issues with this module.
With the remap of the functions, the [BuildOptions] MSFT
CC_FLAGS to enable /Oi can also be removed, so the MSFT
and GCC builds behave the same.
Cc: Kelly Steele <kelly.steele@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Kelly Steele <kelly.steele@intel.com>
edksetup.sh implements a test that requires the current working
directory to contain the edksetup.sh script. This test has the side
effect of requiring the WORKSPACE to be set to the same directory as
the edksetup.sh. In a multiple workspace configuration, it is
required to be able to have a WORKSPACE that is different from the
directory that contains edksetup.sh. This changeset skips this test
if PACKAGE_PATH is set.
Change-Id: Ie6f16a08c012baf4e650c48cc8e91cdc466d05f2
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chris Ruffin <chris.ruffin@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
The patch shows "X"/"-" instead of "Y"/"N" in column "CFG"
and "DIAG".
The patch shows "-" instead of "0" in column "#D" and "#C".
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Huajing Li <huajing.li@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Per NVM Express Spec, software should notify NVME HW when shutdown
occurs.
The NVME controller requires notification for shutdown as part of
its management of internal structures. Even with FUA, failing to
notify the NVME controller to shutdown power off causes the NVME
controller to take quite some time to organize its tables on the
next power on. This time exceeds the normal timeout, so we would
fail to boot the NVME disk.
The host should set the Shutdown Notification (CC.SHN) field to 01b
to indicate a normal shutdown operation. The controller indicates
when shutdown processing is completed by updating the Shutdown Status
(CSTS.SHST) field to 10b.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
In commit 8057622527 ("OvmfPkg/AcpiPlatformDxe: save fw_cfg boot script
with QemuFwCfgS3Lib", 2017-02-23), we replaced the explicit S3 boot script
manipulation in TransferS3ContextToBootScript() with a call to
QemuFwCfgS3CallWhenBootScriptReady(). (Passing AppendFwCfgBootScript() as
callback.)
QemuFwCfgS3CallWhenBootScriptReady() checks for fw_cfg DMA up-front, and
bails with RETURN_NOT_FOUND if fw_cfg DMA is missing.
(This is justified as the goal of QemuFwCfgS3Lib is to "enable[] driver
modules [...] to produce fw_cfg DMA operations that are to be replayed at
S3 resume time".)
In turn, if QemuFwCfgS3CallWhenBootScriptReady() fails, then
OvmfPkg/AcpiPlatformDxe rolls back any earlier linker/loader script
processing, and falls back to the built-in ACPI tables.
(This is also justified because failure to save WRITE_POINTER commands for
replaying at S3 resume implies failure to process the linker/loader script
comprehensively.)
Calling QemuFwCfgS3CallWhenBootScriptReady() from
TransferS3ContextToBootScript() *unconditionally* is wrong however. For
the case when the linker/loader script contains no WRITE_POINTER commands,
the call perpetuated an earlier side effect, and introduced another one:
(1) On machine types that provide fw_cfg DMA (i.e., 2.5+),
QemuFwCfgS3CallWhenBootScriptReady() would succeed, and allocate
workspace for the boot script opcodes in reserved memory. However, no
opcodes would actually be produced in the AppendFwCfgBootScript()
callback, due to lack of any WRITE_POINTER commands.
This waste of reserved memory had been introduced in earlier commit
df73df138d ("OvmfPkg/AcpiPlatformDxe: replay
QEMU_LOADER_WRITE_POINTER commands at S3", 2017-02-09).
(2) On machine types that lack fw_cfg DMA (i.e., 2.4 and earlier),
TransferS3ContextToBootScript() would now fail the linker/loader
script for no reason.
(Note that QEMU itself prevents adding devices that depend on
WRITE_POINTER if the machine type lacks fw_cfg DMA:
$ qemu-system-x86_64 -M pc-q35-2.4 -device vmgenid
qemu-system-x86_64: -device vmgenid: vmgenid requires DMA write
support in fw_cfg, which this machine type does not provide)
Short-circuit an empty S3_CONTEXT in TransferS3ContextToBootScript() by
dropping S3_CONTEXT on the floor. This is compatible with the current
contract of the function as it constitutes a transfer of ownership.
Regression (2) was found and reported by Dhiru Kholia as an OSX guest boot
failure on the "pc-q35-2.4" machine type:
http://mid.mail-archive.com/CANO7a6x6EaWNZ8y=MvLU=w_LjRLXserO3NmsgHvaYE0aUCCWzg@mail.gmail.com
Dhiru bisected the issue to commit 8057622527.
Cc: Dhiru Kholia <dhiru.kholia@gmail.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: df73df138d
Fixes: 8057622527
Reported-by: Dhiru Kholia <dhiru.kholia@gmail.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Dhiru Kholia <dhiru.kholia@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
https://lists.01.org/pipermail/edk2-devel/2017-July/012385.html
reported the timeout processing in SerialRead is not consistent.
Since SerialPortPoll only checks the status of serial port and
returns immediately, and SerialPortRead does not really implement
a time out mechanism and will always wait for enough input,
it will cause below results:
1. If there is no serial input at all, this interface will return
timeout immediately without any waiting;
2. If there is A characters in serial port FIFO, and caller requires
A+1 characters, it will wait until a new input is coming and timeout
will not really occur.
This patch is to update SerialRead() to check SerialPortPoll() and
read data through SerialPortRead() one byte by one byte, and check
timeout against mSerialIoMode.Timeout if no input.
Cc: Heyi Guo <heyi.guo@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Split android boot header definition to share code among
different applications and libraries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In OVMF we currently get the upper (>=4GB) memory size with the
GetSystemMemorySizeAbove4gb() function.
The GetSystemMemorySizeAbove4gb() function is used in two places:
(1) It is the starting point of the calculations in GetFirstNonAddress().
GetFirstNonAddress() in turn
- determines the placement of the 64-bit PCI MMIO aperture,
- provides input for the GCD memory space map's sizing (see
AddressWidthInitialization(), and the CPU HOB in
MiscInitialization()),
- influences the permanent PEI RAM cap (the DXE core's page tables,
built in permanent PEI RAM, grow as the RAM to map grows).
(2) In QemuInitializeRam(), GetSystemMemorySizeAbove4gb() determines the
single memory descriptor HOB that we produce for the upper memory.
Respectively, there are two problems with GetSystemMemorySizeAbove4gb():
(1) It reads a 24-bit count of 64KB RAM chunks from the CMOS, and
therefore cannot return a larger value than one terabyte.
(2) It cannot express discontiguous high RAM.
Starting with version 1.7.0, QEMU has provided the fw_cfg file called
"etc/e820". Refer to the following QEMU commits:
- 0624c7f916b4 ("e820: pass high memory too.", 2013-10-10),
- 7d67110f2d9a ("pc: add etc/e820 fw_cfg file", 2013-10-18)
- 7db16f2480db ("pc: register e820 entries for ram", 2013-10-10)
Ever since these commits in v1.7.0 -- with the last QEMU release being
v2.9.0, and v2.10.0 under development --, the only two RAM entries added
to this E820 map correspond to the below-4GB RAM range, and the above-4GB
RAM range. And, the above-4GB range exactly matches the CMOS registers in
question; see the use of "pcms->above_4g_mem_size":
pc_q35_init() | pc_init1()
pc_memory_init()
e820_add_entry(0x100000000ULL, pcms->above_4g_mem_size, E820_RAM);
pc_cmos_init()
val = pcms->above_4g_mem_size / 65536;
rtc_set_memory(s, 0x5b, val);
rtc_set_memory(s, 0x5c, val >> 8);
rtc_set_memory(s, 0x5d, val >> 16);
Therefore, remedy the above OVMF limitations as follows:
(1) Start off GetFirstNonAddress() by scanning the E820 map for the
highest exclusive >=4GB RAM address. Fall back to the CMOS if the E820
map is unavailable. Base all further calculations (such as 64-bit PCI
MMIO aperture placement, GCD sizing etc) on this value.
At the moment, the only difference this change makes is that we can
have more than 1TB above 4GB -- given that the sole "high RAM" entry
in the E820 map matches the CMOS exactly, modulo the most significant
bits (see above).
However, Igor plans to add discontiguous (cold-plugged) high RAM to
the fw_cfg E820 RAM map later on, and then this scanning will adapt
automatically.
(2) In QemuInitializeRam(), describe the high RAM regions from the E820
map one by one with memory HOBs. Fall back to the CMOS only if the
E820 map is missing.
Again, right now this change only makes a difference if there is at
least 1TB high RAM. Later on it will adapt to discontiguous high RAM
(regardless of its size) automatically.
-*-
Implementation details: introduce the ScanOrAdd64BitE820Ram() function,
which reads the E820 entries from fw_cfg, and finds the highest exclusive
>=4GB RAM address, or produces memory resource descriptor HOBs for RAM
entries that start at or above 4GB. The RAM map is not read in a single
go, because its size can vary, and in PlatformPei we should stay away from
dynamic memory allocation, for the following reasons:
- "Pool" allocations are limited to ~64KB, are served from HOBs, and
cannot be released ever.
- "Page" allocations are seriously limited before PlatformPei installs the
permanent PEI RAM. Furthermore, page allocations can only be released in
DXE, with dedicated code (so the address would have to be passed on with
a HOB or PCD).
- Raw memory allocation HOBs would require the same freeing in DXE.
Therefore we process each E820 entry as soon as it is read from fw_cfg.
-*-
Considering the impact of high RAM on the DXE core:
A few years ago, installing high RAM as *tested* would cause the DXE core
to inhabit such ranges rather than carving out its home from the permanent
PEI RAM. Fortunately, this was fixed in the following edk2 commit:
3a05b13106, "MdeModulePkg DxeCore: Take the range in resource HOB for
PHIT as higher priority", 2015-09-18
which I regression-tested at the time:
http://mid.mail-archive.com/55FC27B0.4070807@redhat.com
Later on, OVMF was changed to install its high RAM as tested (effectively
"arming" the earlier DXE core change for OVMF), in the following edk2
commit:
035ce3b37c, "OvmfPkg/PlatformPei: Add memory above 4GB as tested",
2016-04-21
which I also regression-tested at the time:
http://mid.mail-archive.com/571E8B90.1020102@redhat.com
Therefore adding more "tested memory" HOBs is safe.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1468526
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Commit 09719a01b1 (OvmfPkg/QemuFwCfgLib: Implement SEV internal function
for Dxe phase) uses IOMMU protocol to allocate and free FW_CFG_DMA_ACCESS
buffer when SEV is active. During initial commits we made assumption that
IOMMU.AllocateBuffer() will provide PlainTextAddress (i.e C-bit cleared).
This assumption was wrong, the AllocateBuffer() protocol member is not
expected to produce a buffer that is immediatly usable, and client is
required to call Map() uncondtionally with BusMasterCommonBuffer[64] to
get a mapping which is accessable by both host and device.
The patch refactors code a bit and add the support to Map()
FW_CFG_DMA_ACCESS buffer using BusMasterCommonBuffer operation after
allocation and Unamp() before free.
The complete discussion about this and recommendation from Laszlo can be
found here [1]
[1] https://lists.01.org/pipermail/edk2-devel/2017-July/012652.html
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: convert pointers to UINTN before converting to UINT64]
[lersek@redhat.com: fix argument indentation in multi-line function call]
[lersek@redhat.com: explicitly compare pointers to NULL]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
In order for Unmap() to be callable from ExitBootServices() event handler
context (for cleaning up a BusMasterCommonBuffer[64] operation), we have
to completely liberate the affected path in Unmap() from dynamic memory
management.
The last remaining piece is the release of the MAP_INFO structure. Rather
than freeing it with FreePool(), recycle it to an internal list. Elements
of this "free list" can be reused for any kind of Map() operation, and can
be freed later, or recycled again.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Upon a MemEncryptSevClearPageEncMask() failure in Map(), it wouldn't be
difficult to release the bounce buffer that was implicitly allocated for
BusMasterRead[64] and BusMasterWrite[64] operations. However, undoing any
partial memory encryption mask changes -- partial page splitting and PTE
modifications -- is practically impossible. (For example, restoring the
encryption mask on the entire range has no reason to fare any better than
the MemEncryptSevClearPageEncMask() call itself.)
For this reason, keep ASSERT_EFI_ERROR(), but hang in RELEASE builds too,
if MemEncryptSevClearPageEncMask() or MemEncryptSevSetPageEncMask() fails.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
At the moment, we have the following distribution of actions between the
IOMMU protocol member functions:
- AllocateBuffer() allocates pages and clears the memory encryption mask.
- FreeBuffer() re-sets the memory encryption mask, and deallocates pages.
- Map() does nothing at all when BusMasterCommonBuffer[64] is requested
(and AllocateBuffer() was called previously). Otherwise, Map() allocates
pages, and clears the memory encryption mask.
- Unmap() does nothing when cleaning up a BusMasterCommonBuffer[64]
operation. Otherwise, Unmap() clears the encryption mask, and frees the
pages.
This is wrong: the AllocateBuffer() protocol member is not expected to
produce a buffer that is immediately usable, and client code is required
to call Map() unconditionally, even if BusMasterCommonBuffer[64] is the
desired operation. Implement the right distribution of actions as follows:
- AllocateBuffer() allocates pages and does not touch the encryption mask.
- FreeBuffer() deallocates pages and does not touch the encryption mask.
- Map() does not allocate pages when BusMasterCommonBuffer[64] is
requested, and it allocates pages (bounce buffer) otherwise. Regardless
of the BusMaster operation, Map() (and Map() only) clears the memory
encryption mask.
- Unmap() restores the encryption mask unconditionally. If the operation
was BusMasterCommonBuffer[64], then Unmap() does not release the pages.
Otherwise, the pages (bounce buffer) are released.
This approach also ensures that Unmap() can be called from
ExitBootServices() event handlers, for cleaning up
BusMasterCommonBuffer[64] operations. (More specifically, for restoring
the SEV encryption mask on any in-flight buffers, after resetting any
referring devices.) ExitBootServices() event handlers must not change the
UEFI memory map, thus any memory allocation or freeing in Unmap() would
disqualify Unmap() from being called in such a context.
Map()-ing and Unmap()-ing memory for a BusMasterCommonBuffer[64] operation
effectively means in-place decryption and encryption in a SEV context. As
an additional hurdle, section "7.10.8 Encrypt-in-Place" of AMD publication
Nr.24593 implies that we need a separate temporary buffer for decryption
and encryption that will eventually land in-place. Allocating said
temporary buffer in the straightforward way would violate the above
allocation/freeing restrictions on Map()/Unmap(), therefore pre-allocate
this "stash buffer" too in AllocateBuffer(), and free it in FreeBuffer().
To completely rid Unmap() of dynamic memory impact, for
BusMasterCommonBuffer[64] operations, we're going to rework the lifecycle of
the MAP_INFO structures in a later patch.
(The MemEncryptSevSetPageEncMask() call in Unmap() could theoretically
allocate memory internally for page splitting, however this won't happen
in practice: in Unmap() we only restore the memory encryption mask, and
don't genuinely set it. Any page splitting will have occurred in Map()'s
MemEncryptSevClearPageEncMask() call first.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
There are three issues with the current calculations:
- The initial logic that sets up "DmaMemoryTop" and "AllocateType" checks
for the BusMasterCommonBuffer64 operation in two places. The inner check
for BusMasterCommonBuffer64 will never evaluate to TRUE however, because
the outer check excludes BusMasterCommonBuffer64.
- In order to lower "DmaMemoryTop" to (SIZE_4GB - 1), the outer check
requires that the encrypted (original) buffer cross the 4GB mark. This
is wrong: for BusMasterRead[64] and BusMasterWrite[64] operations, we
unconditionally need a bounce buffer (a decrypted memory area), and for
the 32-bit variants, "DmaMemoryTop" should be lowered regardless of the
location of the original (encrypted) buffer.
- The current logic would be hard to extend for the in-place decryption
that we'll implement in the next patch.
Therefore rework the "MapInfo->PlainTextAddress" setup. No functional
changes beyond said bugfixes.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Whenever we release the plaintext bounce buffer pages that were allocated
implicitly in Map() for BusMasterRead[64] and BusMasterWrite[64], we
restore the encryption mask on them. However, we should also rewrite the
area (fill it with zeros) so that the hypervisor is not left with a
plaintext view of the earlier data.
Similarly, whenever we release the plaintext common buffer pages that were
allocated explicitly in AllocateBuffer() for BusMasterCommonBuffer[64], we
restore the encryption mask on them. However, we should also rewrite the
area (fill it with zeros) so that the hypervisor is not left with a
plaintext view of the earlier data.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The following library classes are not used by this module, so remove them
from the INF file's [LibraryClasses] section:
- DxeServicesTableLib
- UefiLib
The following library classes are used by this module, so add them to the
INF file's [LibraryClasses] section:
- BaseMemoryLib (e.g. via CopyMem())
- MemoryAllocationLib (e.g. via AllocatePool())
Sort the list of library classes (in both "IoMmuDxe.inf" and
"AmdSevIoMmu.h").
Remove all non-local #include directives from "IoMmuDxe.c"; both C files
of this module include "AmdSevIoMmu.h", and "AmdSevIoMmu.h" includes all
non-local headers already.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
In a form, some new menus may be dynamically inserted between highlight
menu and previous top of screen menu when some question are refreshed.
So the highlight menu and previous top of screen menu perhaps can't be
shown in one page. Existing codes miss to handle this case then will
cause incorrect display.This patch is to fix this display issue.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The last 3 bytes of ISID should be able to changed by setting the keyword with
a value with length 6 (only last 3 bytes) or 12 (full ISID) according to the
keyword definition in UEFI configuration namespace website.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
This commit modifies the CPUID signature check MACRO for IvyBridge
processor by adding a missing DisplayModel 0x3E. The missing one appears
at Section 35.10.1 to Section 35.10.3 of the Intel(R) 64 and IA-32
Architectures Software Developer's Manual, Volume 3, September 2016.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
If the EFI_SEC_HOB_DATA_PPI is in the list of PPIs passed to the PEI
entry point, the PEI Foundation will call the GetHobs() member
function and install all HOBs returned into the HOB list. It does
this after installing all PPIs passed from SEC into the PPI database
and before dispatching any PEIMs.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
HTTP defines a set of status code for redirecting a request to a different URI
in Section 6.4 of RFC7231 and also RFC7583. This patch updates the HTTP boot
driver to display the redirection info to the screen so the user would have
chance to know new URI address of the HTTP boot image.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
The documentation of PpinSupport() refers to 'Enhanced Intel
SpeedStep'. This patch fixes these referneces.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
According to the Universal Flash Storage (UFS) Version 2.1 (JESD220C) spec
Section 10.7.8.5, the DATA SEGMENT LENGTH field of the UPIU shall also be
set to number of descriptor bytes to write.
The origin codes miss the above operation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
EFI_FTP4_DATA_CALLBACK is a function pointer and defined as follows:
> typedef
> EFI_STATUS
> (EFIAPI *EFI_FTP4_DATA_CALLBACK)(
> IN EFI_FTP4_PROTOCOL *This,
> IN EFI_FTP4_COMMAND_TOKEN *Token
> );
And EFI_FTP4_COMMAND_TOKEN structure declared it as:
> EFI_FTP4_DATA_CALLBACK *DataCallback
Which ended up being a pointer to function pointer and clearly wrong.
This patch fixes it by removing the misleading '*' from declaration.
It's also fixed in new UEFI 2.7 spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paulo Alcantara <paulo.alc.cavalcanti@hp.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
During clean up the HTTP child, all resources used by it should be cleaned. But
currently, TLS instance is not destroyed.
This patch is to fix this issue.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
TLS BIO objects (InBio/OutBio) will be freed by SSL_free() function.
So, the following free operation (BIO_free) in TlsFree is redundant.
It can be removed directly.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Long Qin <qin.long@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
This patch is to fix the potential issue recorded at Bugzilla 636:
https://bugzilla.tianocore.org/show_bug.cgi?id=636
The issue is caused by the IPv6 policy switching after PXEv6 boot. When IP
policy is changing, the IPv6 children used by PXE.UdpRead() will be destroyed.
Then, PXE Stop() function is called to uninstall the devicePath protocol,
which leads to the IPv6 PXE boot option goes missing.
Through the above analysis, the IP driver should take the responsibility for
the upper layer network stacks recovery by using ConnectController().
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Ni Ruiyu <ruiyu.ni@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Subramanian Sriram <sriram-s@hpe.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Add explicit NULL pointer check to make the codes more straight-forward.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Move IS_DEVICE_PATH_NODE into header to share it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Current SEC performance data getting code in FirmwarePerformancePei
may get wrong SEC performance data if FirmwarePerformancePei executes
after memory discovered.
And as SecCore has added SecPerformancePpiCallBack to get SEC performance
data and build HOB to convey the SEC performance data to DXE phase.
This patch is to remove the SEC performance data getting code in
FirmwarePerformancePei.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add SecPerformancePpiCallBack to get SEC performance data and
build HOB to convey the SEC performance data to DXE phase.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
InstallPpi() will be used for normal PPI in PPI list from SEC,
and NotifyPpi() will be used for notification PPI in PPI list from SEC.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch is to follow latest (>= 1.5) PI spec to add description
for notification PPI from SEC
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When PiSmmCore links against PeiDxeDebugLibReportStatusCode, the code
flow below will cause a FreePool() assertion issue.
PiSmmCoreMemoryAllocationLibConstructor() ->
SmmInitializeMemoryServices() ->
DEBUG ((DEBUG_INFO, "SmmAddMemoryRegion\n")) in SmmAddMemoryRegion() ->
DebugPrint() -> REPORT_STATUS_CODE_EX() -> ReportStatusCodeEx() ->
AllocatePool()/FreePool(PiSmmCoreMemoryAllocLib) ->
ASSERT() at Head = CR (Buffer, POOL_HEAD, Data, POOL_HEAD_SIGNATURE)
in CoreFreePoolI() of DxeCore Pool.c
It is because at the point of FreePool() in the code flow above,
mSmmCoreMemoryAllocLibSmramRanges/mSmmCoreMemoryAllocLibSmramRangeCount
are not been initialized yet, the FreePool() will be directed to
gBS->FreePool(), that is wrong.
This patch is to temporarily use BootServicesData to hold the
SmramRanges data before calling SmmInitializeMemoryServices().
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
We set Pcd value in FDF and used this Pcd as PatchableInModule type in
module, it cause build report generate failure. because we incorrectly
set the Pcd type during check whether the Pcd is used.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PciScanBus() assumes the GetResourcePadding() puts BUS descriptor
in the very beginning, if it's not, the Descriptors will be updated
to point to middle of the pool buffer, which can cause
FreePool(Descriptors) hang in DEBUG image.
No functionality impact to RELEASE image.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
PathSize is the number of bytes in PathForReturn buffer so
PathForReturn[PathSize - 1] incorrectly accesses the last
character in the buffer,
PathForReturn[PathSize / sizeof (CHAR16) - 1] should be used.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Steven Shi <steven.shi@intel.com>
MAX_FILE_NAME_LEN and FIND_XXXXX_FILE_BUFFER_SIZE are not used
by ShellLib so remove them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Delete PiSmmCommunicationAcpiTable.h and delete SMM Communication ACPI
Table definition in UefiAcpiDataTable.h.
As EFI_SMM_COMMUNICATE_HEADER is defined in both PI spec vol 4
and UEFI spec, move its definition to SmmCommunication.h.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Follow UEFI 2.7 spec to deprecate SMM Communication ACPI Table,
PiSmmCommunicationSmm will not install SMM Communication ACPI Table
anymore.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Remove redundant include to UefiAcpiDataTable.h as
SmmCommunication.h will help to include it.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
V2: Refine the comments.
In UI page, some configuration change may require system reset.
BootMaintenanceManagerUiLib misses this check before exiting UiApp
to boot other boot options. Now add the check.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V2: Refine the comments.
In UI page, some configuration change may require system reset.
BootManagerUiLib misses this check before exiting UiApp to boot
other boot options. Now add the check.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
After calling SendForm to enter front page, configuration change in some
driver may require system reset. Currently the reset status is saved in
SendForm level. Then SendForm can return the reset status.
IsResetRequired API also can return the reset status before exiting browser.
It return the reset status in current SendForm level now. But SendForm can
be recursive called by some module.so the reset status in previous SendForm
may be lost. Now change the IsResetRequired API to return the reset info no
matter the reset is caught in any SendForm.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Currently the PcdMaxVariableSize is controlled by the below condition
check:
!if $(SECURE_BOOT_ENABLE) == TRUE || $(TLS_ENABLE) == TRUE
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x2000
!endif
But for other case, PcdMaxVariableSize is also required with the value
of 0x2000 (e,g. NetworkPkg/IScsiDxe), so remove the condition of
PcdMaxVariableSize for NT32 platform.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
It provides sample on Platform VTd policy protocol.
This protocol is optional.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
It provides AllocateBuffer/FreeBuffer/Map/Unmap function.
It also provides VTd capability yet.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The patch adds logic to probe the media change for physical
block devices. So that when media change happens, the BlockIo
is re-installed again.
It fixes the issue when CDROM is removed UEFI Shell still shows
the BlockIo in the output of "map -r".
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=644
According to XHCI spec:
4.10.2.1 Stall Error
4.10.2.4 Babble Detected Error
When a device transmits more data on the USB than the host controller
is expecting for a transaction, it is defined to be babbling.
In general, this is called a Babble Error. When a device sends more
data than the TD Transfer Size bytes (TD Babble), unexpected activity
that persists beyond a specified point in a (micro)frame (Frame Babble),
or a packet greater than Max Packet Size (Packet Babble), the host
controller shall set the Babble Detected Error in the Completion Code
field of the TRB, generate an Error Event, and halt the endpoint
(refer to Section 4.10.2.1).
This patch is to also check for EFI_USB_ERR_BABBLE error returned as
a TransferResult and then proceed to XhcRecoverhaltedEndPoint.
Cc: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=593
Currently, SmmCommunciate fails in RestoreLockBox after
SmmReadyToLock since COMM buffer is in stack instead of
using SmmCommRegion by gEdkiiPiSmmCommunicationRegionTableGuid.
This patch is to get SmmCommRegion by
gEdkiiPiSmmCommunicationRegionTableGuid for COMM buffer
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Baraneedharan Anbazhagan <anbazhagan@hp.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
UEFI Spec uses UnRegisterResetNotify in protocol structure
definition but uses UnregisterResetNotify in the function
prototype definition.
By searching the entire spec, Unregister* is used for
SIMPLE_TEXT_INPUT_EX_PROTOCOL.UnregisterKeyNotify(). So choose
to use UnregisterResetNotify for consistency.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In the definition, the warn() function takes at least 2 arguments.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch add some comments to explain why we use .PrebuildEnv file to
save environment variable settings set by the prebuild script.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PcdGetSize() returns UINTN data type. The consumer code should use UINTN data
to get its size.
This issue is found when PcdCpuFeaturesSupport is configured as patchable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
UEFI spec 2.6 errata B update Status Codes Returned table of the
EFI_USBFN_IO_PROTOCOL.GetDeviceInfo function as follows:
1. Update EFI_INVALID_PARAMETER description:
Original text:
A parameter is invalid.
New text:
One or more of the following conditions is TRUE:
BufferSize is NULL.
*BufferSize is not 0 and Buffer is NULL.
Id in invalid.
2. Update EFI_BUFFER_TOO_SMALL description:
Original text:
Supplied buffer isn’t large enough to hold the request string.
New text:
The buffer is too small to hold the buffer.
*BufferSize has been updated with the size needed to hold the
request string.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Disable CPU feature may return error, add error handling
code to handle it instead of assert it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
The patch fixes two kinds of bugs in DxeCore that accesses memory
which might be freed or owned by other modules.
The two bugs don't cause functionality issue.
1. CoreValidateHandle() checks whether the handle is valid by
validating its signature. The proper way is to check whether
the handle is in the handle database.
2. CoreDisconnectControllersUsingProtocolInterface() and
CoreOpenProtocol() de-reference Link pointer which is
already freed. The proper way is to not de-reference the pointer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
The Hsti returned from InternalHstiFindAip() and temporally
allocated NewHsti need to be freed after used.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The definition for 1.1a has no difference with 1.0.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Adjust FIFO threshold according to FIFO depth. Skip
the adjustment if we do not have FIFO depth info.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Some boards may have max clock limitation. Add a Pcd to notify
driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
ZTE/SanChip version pl011 has different reg offset and bit offset
for some registers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Commit 0df6c8c157 ("BaseTools/tools_def AARCH64: avoid SIMD registers
in XIP code") updated the compiler flags used by AARCH64 when building
modules (including BASE libraries) that may execute before the MMU is
enabled.
This broke the build for OpensslLib/OpensslLibCrypto because the SIMD
register file is shared with the FPU, and since OpenSSL contains some
references to float/double types (which are mostly unused for UEFI btw),
disabling floating point prevents the compiler from building OpenSSL
at all. So for OpensslLib[Crypto], we need to override the XIP CC flags,
to remove the -mgeneral-regs-only compiler flag again.
When introducing the support for XIP CC flags, we were aware that this
would affect BASE libraries as well, but were not expecting this to
have any performance impact. However, in the case of software crypto,
it makes sense not to needlessly inhibit the compiler's ability to
generate fast code, and even if OpenssLib is a BASE library, it is
guaranteed not to run with the MMU off. So omit -mstrict-align from the
local XIP CC flags override as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Long Qin <qin.long@intel.com>
XIP code may execute with the MMU off, in which case all memory accesses
should be strictly aligned to their size. Some versions of GCC violate
this restriction even when -mstrict-align is passed, when performing
loads and stores that involve SIMD registers. This is clearly a bug in
the compiler, but we can easily work around it by avoiding SIMD registers
altogether when building code that may execute in such a context. So add
-mgeneral-regs-only to the AARCH64 XIP CC flags.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The AArch64 ABI classifies register x18 as a platform register, which
means it should not be used unless the code is guaranteed to run on a
platform that doesn't use it in such a capacity.
GCC does not honour this requirement by default, and so we need to tell
it not to touch it explicitly, by passing the -ffixed-x18 command line
option.
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=625
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Add error handling code when initialize the CPU feature failed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
NumPages variable was introduced in commit 66c548be50. In this commit
we allocate an intermediate buffer when SEV is enabled. The 'BounceBuffer'
variable points to the intermediate buffer pointer and NumPages variables
stores the number of pages. Later in the code, 'BounceBuffer' variable is
checked to see if we need to free the intermediate buffers. The code looks
correct, suppress the warning.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Reported-by: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: s/warnigns/warnings/ in the code comment]
[lersek@redhat.com: add Gerd's Reported-by]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
This patch enables PciHostBridgeDxe driver to use Platform IoMMU detection
library to ensure that PciHostBridgeDxe is run after platform IoMmuDxe
driver has checked whether platform need to install IOMMU protocol provider.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Update InternalQemuFwCfgDmaBytes() to work with DMA Access pointer.
The change provides the flexibility to dynamically allocate the "Access"
when SEV is enabled.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
When SEV is enabled, the DMA must be performed on unencrypted pages.
So when get asked to perfom FWCFG DMA read or write, we allocate a
intermediate (bounce buffer) unencrypted buffer and use this buffer
for DMA read or write.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Current QemuFwCfgLib.inf is used in both Pei and Dxe phases. Add Pei
and Dxe inf file to provide a seperate QemuFwCfgLib instances for Pei
and Dxe phases.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The IOMMU protocol driver provides capabilities to set a DMA access
attribute and methods to allocate, free, map and unmap the DMA memory
for the PCI Bus devices.
Due to security reasons all DMA operations inside the SEV guest must
be performed on shared (i.e unencrypted) pages. The IOMMU protocol
driver for the SEV guest uses a bounce buffer to map guest DMA buffer
to shared pages inorder to provide the support for DMA operations inside
SEV guest.
IoMmuDxe driver looks for SEV capabilities, if present then it installs
the real IOMMU protocol otherwise it installs placeholder protocol.
Currently, PciHostBridgeDxe and QemuFWCfgLib need to know the existance
of IOMMU protocol. The modules needing to know the existance of IOMMU
support should add
gEdkiiIoMmuProtocolGuid OR gIoMmuAbsentProtocolGuid
in their depex to ensure that platform IOMMU detection has been performed.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Leo Duran <leo.duran@amd.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Suggested-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Add the shorter-term library instance outlined in the previous patch to
OvmfPkg, so that we can imbue PciHostBridgeDxe with a protocol dependency
on gEdkiiIoMmuProtocolGuid OR gIoMmuAbsentProtocolGuid.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Platforms that optionally provide an IOMMU protocol should do so by
including a DXE driver (usually called IoMmuDxe) that produces either
the IOMMU protocol -- if the underlying capabilities are available --,
or gIoMmuAbsentProtocolGuid, to signal that the IOMMU capability
detection completed with negative result (i.e., no IOMMU will be
available in the system).
In turn, DXE drivers (and library instances) that are supposed to use
the IOMMU protocol if it is available should add the following to
their DEPEX:
gEdkiiIoMmuProtocolGuid OR gIoMmuAbsentProtocolGuid
This ensures these client modules will only be dispatched after IOMMU
detection completes (with positive or negative result).
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Leo Duran <leo.duran@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
When SEV is enabled, the MMIO memory range must be mapped as unencrypted
(i.e C-bit cleared).
We need to clear the C-bit for MMIO GCD entries in order to cover the
ranges that were added during the PEI phase (through memory resource
descriptor HOBs). Additionally, the NonExistent ranges are processed
in order to cover, in advance, MMIO ranges added later in the DXE phase
by various device drivers, via the appropriate DXE memory space services.
The approach is not transparent for later addition of system memory ranges
to the GCD memory space map. (Such ranges should be encrypted.) OVMF does
not do such a thing at the moment, so this approach should be OK.
The driver is being added to the APRIORI DXE file so that, we clear the
C-bit from MMIO regions before any driver accesses it.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Leo Duran <leo.duran@amd.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Suggested-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Secure Encrypted Virtualization (SEV) guest VMs have the concept of
private and shared memory. Private memory is encrypted with the
guest-specific key, while shared memory may be encrypted with hypervisor
key. Certain types of memory (namely instruction pages and guest page
tables) are always treated as private memory by the hardware.
For data memory, SEV guest VMs can choose which pages they would like
to be private. The choice is done using the standard CPU page tables
using the C-bit. When building the initial page table we mark all the
memory as private.
The patch sets the memory encryption PCD. The PCD is consumed by the
following edk2 modules, which manipulate page tables:
- PEI phase modules: CapsulePei, DxeIplPeim, S3Resume2Pei.
CapsulePei is not used by OVMF. DxeIplPeim consumes the PCD at the
end of the PEI phase, when it builds the initial page tables for the
DXE core / DXE phase. S3Resume2Pei does not consume the PCD in its
entry point function, only when DxeIplPeim branches to the S3 resume
path at the end of the PEI phase, and calls S3Resume2Pei's
EFI_PEI_S3_RESUME2_PPI.S3RestoreConfig2() member function.
Therefore it is safe to set the PCD for these modules in PlatformPei.
- DXE phase modules: BootScriptExecutorDxe, CpuDxe, PiSmmCpuDxeSmm.
They are all dispatched after the PEI phase, so setting the PCD for
them in PlatformPei is safe. (BootScriptExecutorDxe is launched "for
real" in the PEI phase during S3 resume, but it caches the PCD into a
static variable when its entry point is originally invoked in DXE.)
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Add Secure Encrypted Virtualization (SEV) helper library.
The library provides the routines to:
- set or clear memory encryption bit for a given memory region.
- query whether SEV is enabled.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
When SEV is enabled then we must unroll the rep String I/O instructions.
The patch updates dsc file to use SEV version of IoLib inf. The main
difference between BaseIoLibIntrinsic.inf and BaseIoLibIntrinsicSev.inf
is, SEV version checks if its running under SEV enabled guest, If so
then it unroll the String I/O (REP INS/OUTS) otherwise fallbacks to
rep ins/outs.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
SEV guest VMs have the concept of private and shared memory. Private
memory is encrypted with the guest-specific key, while shared memory
may be encrypted with hypervisor key. Certain types of memory (namely
instruction pages and guest page tables) are always treated as private
memory by the hardware. The C-bit in PTE indicate whether the page is
private or shared. The C-bit position for the PTE can be obtained from
CPUID Fn8000_001F[EBX].
When SEV is active, the BIOS is encrypted by the Qemu launch sequence,
we must set the C-bit when building the page table.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Tom Lendacky <Thomas.Lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
when FDF file use "!include" format to include the other file,
and the end line of the file not end with '\n', the include
file parse error.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
These flags are based on the flags from the GCC5 toolchain in
tools_def.template. Since the GCC5 toolchain uses link-time
optimizations (LTO), we must compile and link the 'Host' files with
LTO enabled so we can link to other modules.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This patch verifies MM_CORE_STANDALONE module compatibility with PI
specification version.
Also, it registers MM_STANDALONE/MM_CORE_STANDALONE modules with
FdfParser class and provides mapping between MM_STANDALONE and
MM_CORE_STANDALONE module type in FDF with
EFI_FV_FILETYPE_MM_STANDALONE and EFI_FV_FILETYPE_MM_CORE_STANDALONE file types
in GenFfs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch adds support for FdfParser tool to parse MM_STANDALONE and
MM_CORE_STANDALONE modules.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch adds SUP_MODULE_MM_STANDALONE and
SUP_MODULE_MM_CORE_STANDALONE data types and includes it in
SUP_MODULE_LIST.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch adds changes to auto generate MM_CORE_STANDALONE and
MM_STANDALONE Entry Point templates.
Also, it adds changes to help auto generate dependency expressions for
MM_STANDALONE modules.
PI Specification v1.5 specifies Management Mode System Table (MMST)
which is a collection of common services for managing
MMRAM allocation and providing basic I/O services. MMST is similar to
the UEFI System Table. (Currently, EFI_SMM_SYSTEM_TABLE2 defines
Management Mode System Table)
Some of auto generated MM_CORE_STANDALONE and MM_STANDALONE template
APIs use MMST as parameter.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PI v1.5 Specification Volume 4 defines Management Mode Core Interface.
In order to support Management Mode Core Interface, Module Types
MM_STANDALONE, MM_CORE_STANDALONE are needed.
This patch ensures that MM_STANDALONE, MM_CORE_STANDALONE Modules are
treated as EFI Boot Service Driver in GenFw tool.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PI specification v1.5 defines new firmware volume file types
for Management Mode (MM).
This patch adds the new file type EFI_FV_FILETYPE_MM_STANDALONE and
EFI_FV_FILETYPE_MM_CORE_STANDALONE in GenFfs tool.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Currently, the PE/COFF conversion routines in GenFw add a so-called
NB10 CodeView debug record to the image, and update the associated
directory entry in the PE/COFF optional header to contain its relative
virtual address (RVA) and size.
However, there are two levels of indirection at work here: the actual
NB10 CodeView record (which is simply a magic number and some unused
data fields followed by the NUL terminated filename) is emitted
separately, and a separate descriptor is emitted that identifies the
NB10 CodeView record as type EFI_IMAGE_DEBUG_TYPE_CODEVIEW, and records
its size. The directory entry in the PE/COFF optional header should
refer to this intermediate descriptor's address and size only, but
the WriteDebug## () routines in GenFw erroneously record the size of
both the descriptor and the NB10 CodeView record.
This problem was exposed by commit e4129b0e58 ("BaseTools: Update
GenFw to clear unused debug entry generated by VS tool chain",
2017-06-19), and GenFw now crashes when it attempts to iterate over
what it thinks are multiple intermediate descriptors for different
kinds of debug data embedded in the image.
The error is understandable, given that both are carved out of the
same file space allocation, but this is really an implementation detail
of GenFw, and is not required. (Note that the intermediate descriptor
does not require a RVA and so it does not even need to be inside a
section)
So omit the size of the NB10 CodeView record from the size recorded
in the optional header.
Link: https://lists.01.org/pipermail/edk2-devel/2017-July/012162.html
Link: https://lists.01.org/pipermail/edk2-devel/2017-July/012181.html
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Co-debugged-or-whatever-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Adds the implementation of Disk Information Protocol for EMMC devices per
PI 1.6 spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Adds the implementation of Disk Information Protocol for SD devices per
PI 1.6 spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=433
When a blocking NVMe PassThru request experiences timeout, the current
codes in function NvmExpressPassThru() do not abort the timeout request
while advancing synchronous Submission Queue tail. Therefore, it is
possible to submit a new blocking PassThru request when the synchronous
Submission Queue is full.
The commit adds logic to abort the timeout request by resetting the NVMe
controller when a timeout occurs for a blocking PassThru request.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
PlatformPei can now overwrite PcdQ35TsegMbytes; document this in
"OvmfPkg/OvmfPkg.dec".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Recognize an extended TSEG when available in
Q35TsegMbytesInitialization(), and set both PcdQ35TsegMbytes (for
OvmfPkg/SmmAccess) and "mQ35TsegMbytes" (for PlatformPei's own use)
accordingly. The new logic interfaces with the QEMU feature added in QEMU
commit 2f295167e0c4 ("q35/mch: implement extended TSEG sizes",
2017-06-08).
At this point we have to explicitly restrict Q35TsegMbytesInitialization()
to the Q35 board, but that's OK, because Q35TsegMbytesInitialization() is
only called when PcdSmmSmramRequire is set, and for that Q35 is already an
enforced requirement.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In SmmAccessPeiEntryPoint(), map TSEG megabyte counts different from 1, 2
and 8 to the MCH_ESMRAMC_TSEG_EXT bit pattern (introduced in the previous
patch), for the ESMRAMC.TSEG_SZ bit-field register. (Suggested by Jordan.)
In SmramAccessGetCapabilities() -- backing both
PEI_SMM_ACCESS_PPI.GetCapabilities() and
EFI_SMM_ACCESS2_PROTOCOL.GetCapabilities() --, map the
MCH_ESMRAMC_TSEG_EXT bit pattern found in the ESMRAMC.TSEG_SZ bit-field
register to a byte count of (mQ35TsegMbytes * SIZE_1MB).
(MCH_ESMRAMC_TSEG_EXT is the only possible pattern if none of
MCH_ESMRAMC_TSEG_1MB, MCH_ESMRAMC_TSEG_2MB, and MCH_ESMRAMC_TSEG_8MB
match.)
The new code paths are not exercised just yet; for that, PlatformPei is
going to have to set PcdQ35TsegMbytes (and consequently, SmramInternal's
"mQ35TsegMbytes") to a value different from 1, 2, and 8.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
We can now make PcdQ35TsegMbytes dynamic, in preparation for the extended
TSEG size feature. At the moment we only move the declaration in
OvmfPkg.dec from [PcdsFixedAtBuild] to [PcdsDynamic, PcdsDynamicEx], and
provide the dynamic defaults (with the same value, 8) in the DSC files if
SMM_REQUIRE is TRUE.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In one of the next patches we'll turn PcdQ35TsegMbytes into a dynamic PCD,
to be set by PlatformPei.
Jordan suggested to use gEfiPeiMemoryDiscoveredPpiGuid as SmmAccessPei's
DEPEX for making sure that PlatformPei sets the PCD before SmmAccessPei
consumes it. (PlatformPei installs the permanent PEI RAM.) Such a DEPEX is
supposed to mirror physical firmware, where anything related to SMRAM
cannot run before said platform's physical RAM is discovered (signaled by
the presence of gEfiPeiMemoryDiscoveredPpiGuid).
Introduce the InitQ35TsegMbytes() function and the "mQ35TsegMbytes" extern
variable to "SmramInternal.h" and "SmramInternal.c":
- Both SmmAccess modules (PEIM and DXE driver) are supposed to call
InitQ35TsegMbytes() in their respective entry point functions, saving
PcdQ35TsegMbytes into "mQ35TsegMbytes". This way dynamic PCD fetches can
be kept out of PEI_SMM_ACCESS_PPI and EFI_SMM_ACCESS2_PROTOCOL member
functions later (when we add support for extended TSEG size).
- We can thus replace the current PcdQ35TsegMbytes fetches in
SmmAccessPei's entry point function as well, with reads from
"mQ35TsegMbytes".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In one of the next patches we'll turn PcdQ35TsegMbytes into a dynamic PCD,
to be set by PlatformPei. Introduce the Q35TsegMbytesInitialization()
function and the "mQ35TsegMbytes" global variable to support this.
Q35TsegMbytesInitialization() manages the PCD and caches its final value
into "mQ35TsegMbytes". Call Q35TsegMbytesInitialization() from
InitializePlatform() just in time for the current PCD consumers,
PublishPeiMemory(), InitializeRamRegions() and QemuInitializeRam() --
which is called from InitializeRamRegions() -- to be rebased on top of
"mQ35TsegMbytes".
Call Q35TsegMbytesInitialization() only when PcdSmmSmramRequire is TRUE,
given that PcdQ35TsegMbytes is consumed in that case only.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Widen PcdQ35TsegMbytes to UINT16, in preparation for setting it
dynamically to the QEMU-advertized extended TSEG size (which is 16-bits
wide).
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Jiaxin reports that the OvmfPkg/README instructions for downloading the
Intel PROEFI drivers, and the filenames in OvmfPkg/OvmfPkg*.fdf for
incorporating the same in the OVMF binaries, are no longer up to date; the
download link has stopped working.
Additionally, the IA32 driver binary is no more distributed by Intel.
Update OvmfPkg/README with new download instructions, and adapt the OVMF
FDF files.
With this driver in use for QEMU's e1000 NIC, the DH shell command prints,
as Controller Name, "Intel(R) PRO/1000 MT Network Connection". I
successfully tested DHCP and ping from the UEFI shell.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Reported-by: Jiaxin Wu <jiaxin.wu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=613
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
When the GenFv utility from BaseTools composes a firmware volume, it
checks whether modules in the firmware volume are subject to build-time
relocation. The primary indication for relocation is whether the firmware
volume has a nonzero base address, according to the [FD] section(s) in the
FDF file that refer to the firmware volume.
The idea behind build-time relocation is that XIP (execute in place)
modules will not be relocated at boot-time:
- Pre-DXE phase modules generally execute in place.
(OVMF is no exception, despite the fact that we have writeable memory
even in SEC: PEI_CORE and PEIMs run in-place from PEIFV, after SEC
decompresses PEIFV and DXEFV from FVMAIN_COMPACT (flash) to RAM.
PEI_CORE and the PEIMs are relocated at boot-time only after PlatformPei
installs the permanent PEI RAM, and the RAM migration occurs.)
- Modules dispatched by the DXE Core are generally relocated at boot-time.
However, this is not necessarily so. Quoting Liming from
<https://lists.01.org/pipermail/edk2-devel/2017-July/012053.html>:
> PI spec has no limitation that XIP is for PEIM only. DXE driver may be
> built as XIP for other purpose. For example, if DXE driver image address
> is not zero, DxeCore will try allocating the preferred address and load
> it. In another case, once DXE driver is relocated at build time, DxeCore
> will dispatch it and start it directly without loading, it may save boot
> performance.
Therefore GenFv relocates even DXE and UEFI driver modules if the
containing firmware volume has a nonzero base address.
In OVMF, this is the case for both PEIV and DXEFV:
> [FD.MEMFD]
> BaseAddress = $(MEMFD_BASE_ADDRESS)
> Size = 0xB00000
> ErasePolarity = 1
> BlockSize = 0x10000
> NumBlocks = 0xB0
> ...
> 0x020000|0x0E0000
> gUefiOvmfPkgTokenSpaceGuid.PcdOvmfPeiMemFvBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfPeiMemFvSize
> FV = PEIFV
>
> 0x100000|0xA00000
> gUefiOvmfPkgTokenSpaceGuid.PcdOvmfDxeMemFvBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfDxeMemFvSize
> FV = DXEFV
While the build-time relocation certainly makes sense for PEIFV (see
above), the reasons for which we specify DXEFV under [FD.MEMFD] are
weaker:
- we set the PcdOvmfDxeMemFvBase and PcdOvmfDxeMemFvSize PCDs here,
- and we ascertain that DXEFV, when decompressed by SEC from
FVMAIN_COMPACT, will fit into the area allotted here, at build time.
In other words, the build-time relocation of the modules in DXEFV is a
waste of resources. But, it gets worse:
Build-time relocation of an executable is only possible if the on-disk and
in-memory layouts are identical, i.e., if the sections of the PE/COFF
image adhere to the same alignment on disk and in memory. Put differently,
the FileAlignment and SectionAlignment headers must be equal.
For boot-time modules that we build as part of edk2, both alignment values
are 0x20 bytes. For runtime modules that we build as part of edk2, both
alignment values are 0x1000 bytes. This is why the DXEFV relocation,
albeit wasteful, is also successful every time.
Unfortunately, if we try to include a PE/COFF binary in DXEFV that
originates from outside of edk2, the DXEFV relocation can fail due to the
binary having unmatched FileAlignment and SectionAlignment headers. This
is precisely the case with the E3522X2.EFI network driver for the e1000
NIC, from Intel's BootUtil / PREBOOT.EXE distribution.
The solution is to use the FvForceRebase=FALSE override under [FV.DXEFV].
This tells GenFv not to perform build-time relocation on the firmware
volume, despite the FV having a nonzero base address.
In DXEFV we also have SMM drivers. Those are relocated at boot-time (into
SMRAM) unconditionally; SMRAM is always discovered at boot-time.
Kudos to Ard and Liming for the PE/COFF sections & relocations
explanation, and for the FvForceRebase=FALSE tip.
I regression-tested this change in the following configurations (all with
normal boot and S3 suspend/resume):
IA32, q35, SMM, Linux
IA32X64, q35, SMM, Linux
IA32X64, q35, SMM, Windows-8.1
X64, i440fx, no-SMM, Linux
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=613
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=615
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Commit 7b1dc6c569 'ArmVirtPkg: switch to generic ResetSystemRuntimeDxe'
replaced all references in ArmVirtPkg to the deprecated ResetRuntimeDxe
from EmbeddedPkg with the well maintained generic alternative that lives
in MdeModulePkg.
However, as it turns out, the generic driver has a dependency on the
library class ReportStatusCodeLib, whose default resolution is an
implementation that is not safe for use at runtime, resulting in crashes
when trying to invoke it from the OS.
Since we have no use for status codes in any of the ArmVirtPkg
platforms, let's replace all resolutions with a common one to the NULL
implementation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Since we're in the process of migrating all of the VExpress platforms
to MdeModulePkg ResetSystemRuntimeDxe, convert VExpress ResetSystemLib
from EfiResetSystemLib interface to the ResetSystemLib one.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
ExtCSD structure may be read via DMA. So align it to
page to avoid data corruption.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This fixes BULK data loss when transfer is detected as timeout but
finished just before stopping endpoint.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
The patch separates the common logic in XhcControlTransfer,
XhcBulkTransfer and XhcSyncIntTransfer to a sub-routine
XhcTransfer. It doesn't have functionality impact.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Current implementation of IsTransferRingTrb only checks whether
the TRB is in the RING of the URB.
The patch enhanced the logic to check that whether the TRB belongs
to the transaction of URB.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
When using edksetup.bat Rebuild, the script outputs usage instructions
to the console, when no usage error is encountered. Update the usage
instructions and suppress these usage instructions when using the
Rebuild, ForceRebuild options.
Change-Id: Ica98e19f3d5198df2519106e4c55314c255e04ac
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chris Ruffin <chris.ruffin@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
The BeagleBoard port used EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
for its reset handling. With the arrival
MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
As part of this, change BeagleBoardPkg/Library/ResetSystemLib to be an
implementation of ResetSystemLib instead of the previous
EfiResetSystemLib.
Wire all reset variants to ResetCold, except for ResetShutdown and
EnterS3WithImmediateWake, which return immediately.
Note: this ResetSystemLib never supported being called after
ExitBootservices, and this shortcoming is not addressed here.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
For obscure reasons, ARM platforms use a different implementation of
the ResetSystem() runtime service call than other platforms. So let's
switch all ArmVirtPkg platforms to the generic version instead.
Given that all platforms use an implementation of EfiResetSystemLib [as
consumed by the ResetRuntimeDxe in EmbeddedPkg that we are replacing]
which is unlikely to be depended upon by out of tree platforms, let's
simply modify this library into an implementation of ResetSystemLib
instead [which is what the generic driver in MdeModulePkg consumes]
This does mean we need to update all clients at the same time, which
is why all changes are part of the same patch.
As before, warm reset and platform specific reset are mapped onto
cold reset (which is the only thing PSCI implements, at least the
version we depend on). The new library function EnterS3WithImmediateWake()
is left unimplemented, as permitted by the ResetSystemLib library class.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This adds an implementation of the ResetSystemLib library class as
defined in MdeModulePkg. It is used as the platform glue by the generic
ResetSystemRuntimeDxe which lives in the same package.
This implementation is intended to replace the EfiResetSystemLib based
implementation that is deprecated now that we have decided that there is
no longer a reason to keep a different ResetSystem() implementation
under EmbeddedPkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The argument of CMD8 should be stuff bits according to standard
JESD84-A44.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Only DDR mode is support for 8bit mode currently. Add
non-DDR case when configuring ECSD.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
dh command gets driver name and wrongly prints it as 'Child [handle]'.
It should print it as 'Driver Name [handle]'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The SATA spec mandates that link detection by the PHY completes within
10 ms after receiving a reset signal. However, there is no obligation
to uphold this requirement at the driver end as strictly as we do, and
as it turns out, some combinations of host and device (e.g., Samsung
850 EVO connected to a LeMaker Cello) are only borderline compliant,
which means the device is not detected reliably.
So let's allow for a bit of margin, and increase the PHY detect timeout
value to 15 ms.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This updates the IORT header to include the definitions that were added
in revision C of the IORT spec that was made public recently.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
"The size must be large enough to fit input string supplied in
VariableName buffer" is added in the description for VariableNameSize.
And two cases of EFI_INVALID_PARAMETER are added.
1. The input values of VariableName and VendorGuid are not a name and
GUID of an existing variable.
2. Null-terminator is not found in the first VariableNameSize bytes of
the input VariableName buffer.
This patch is to update code to follow them.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
"The size must be large enough to fit input string supplied in
VariableName buffer" is added in the description for VariableNameSize.
And two cases of EFI_INVALID_PARAMETER are added.
1. The input values of VariableName and VendorGuid are not a name and
GUID of an existing variable.
2. Null-terminator is not found in the first VariableNameSize bytes of
the input VariableName buffer.
This patch is to update code to follow them.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
"The size must be large enough to fit input string supplied in
VariableName buffer" is added in the description for VariableNameSize.
And two cases of EFI_INVALID_PARAMETER are added.
1. The input values of VariableName and VendorGuid are not a name and
GUID of an existing variable.
2. Null-terminator is not found in the first VariableNameSize bytes of
the input VariableName buffer.
This patch is to update comments for GetNextVariableName to follow them.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Current code will allocate pool to hold the null char for name buffer
when PrevName==NULL, but the NameSize is still 0.
For this case, GetNextVariableName will return EFI_INVALID_PARAMETER
to follow UEFI 2.7 spec.
UEFI 2.7 spec:
The VariableNameSize must not be smaller the size of the variable
name string passed to GetNextVariableName() on input in the
VariableName buffer.
EFI_INVALID_PARAMETER
Null-terminator is not found in the first VariableNameSize bytes of
the input VariableName buffer.
This patch is to make NameSize to be consistent with name buffer.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Report Status Code to indicate BDS starts attempting booting
from the UEFI BootOrder list.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
According to new PI spec, add new Status Code to indicate BDS starts
attempting booting from the UEFI BootOrder list.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
There is a case that ExtractGuidedSectionGetInfo return 0 for
ScratchBufferSize and ScratchBuffer will be NULL, after AllocatePool
fails to allocate buffer for AllocatedOutputBuffer, the code will
call FreePool (ScratchBuffer), but ScratchBuffer == NULL.
This patch is to only free ScratchBuffer when it is not NULL.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Change since v3:
1) Fixed issue when Attributes = EFI_OPEN_PROTOCOL_TEST_PROTOCOL
and Inteface = NULL case. [Reported by:star.zeng at intel.com]
Change Since v2:
1) Modified to use EFI_ERROR to get status code
Change since v1:
1) Fixed typo protocal to protocol
2) Fixed coding style
Modified source code to update Interface as per spec.
1) In case of Protocol is un-supported, interface should be returned NULL.
2) In case of any error, interface should not be modified.
3) In case of Test Protocol, interface is optional.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Amit Kumar <amit.ak@samsung.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The commit adds the detection of adding new binary files in a patch file
or in a commit.
The following warning messages will be appended at the end of the script
output:
WARNING - The following binary files will be added into the repository:
<BinaryFile1>
<BinaryFile2>
...
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
For a patch file that:
1. Contains a binary change
2. Contains any other changes after the binary change
PatchCheck.py will complains with the following error:
* Patch format error: diff found after end of patch
Line: literal XXXX
This commit resolves this misreport.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Currently DSC file [Components] Section can support building the same
INF more than once for the same arch, this patch support build with -m
option to generate multiple instances.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add a check that HiiString field in the HII format PCD entry must not
be an empty string.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Enhance the report to not show the empty section, eg: Module Library
Sub-section, if there is nothing in this section, we will not show it
in the report.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. break if Dec Defines Section is missing
2. break if Dec have more than one Defines Section
3. break if Dec Defines Section have arch attribute
4. break if no section head, like as:
#[Defines]
DEC_SPECIFICATION = 0x00010005
PACKAGE_NAME = Nt32Pkg
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Per build spec to update the tool to copy "TianoCore" userextensions to
As Built INF file.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Current the "MODULE_UNI_FILE" item defined in the [Defines] section will
be copied into As Built INF file, but tool doesn't copy the real file into
same directory with the As Built INF file.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This commit updates the Firmware Error Record related definitions
according to UEFI 2.7 spec Section N.2.10 Table 281:
a. Adds definitions for 2 Firmware Error Record types
b. Update the structure EFI_FIRMWARE_ERROR_DATA
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Current code is using debug message like below for
InstallProtocolInterface.
InstallProtocolInterface: XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX XXX
User could not know whether the installation is failed or not by the
debug message, for example, the code below does not initialize Handle
before calling InstallProtocolInterface, EFI_INVALID_PARAMETER will be
returned.
EFI_HANDLE Handle;
Status = gBS->InstallProtocolInterface (
&Handle,
&XXX,
EFI_NATIVE_INTERFACE,
XXX
);
This patch is to add additional debug message if the installation
is failed and specific debug message for the case that the input
handle is invalid.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
update Base.h in MdePkg to check the _MSC_VER and define
GLOBAL_REMOVE_IF_UNREFERENCED to nothing for VS2013 and higher tool
chain tags.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
The /Gw flag does a better job at size optimization than use of the
GLOBAL_REMOVE_IF_UNREFERENCED macro that is currently used for VS20xx
tool chains to remove unreferenced global variables.
This patch add /Gw to CC_FLAGS for VS2013 and higher tool chain tags.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
On AARCH64, any code that may execute with the MMU off needs to be built
with -mstrict-align, given that unaligned accesses are not allowed unless
the MMU is enabled. This does not only affect SEC and PEI modules, but
also static libraries of the BASE type, which may be linked into such
modules, as well as into modules of other types. As it turns out, the
presence of -mstrict-align is reflected in the internal representations
of the types defined in those libraries.
When -fstrict-aliasing is passed to GCC, it assumes that pointers to
objects of different types cannot refer to the same memory location, and
attempts to exploit this fact when optimizing the code. Since such
assumptions are only valid under very strict conditions which are not
guaranteed to be met in EDK2, we disable this optimization by passing
-fno-strict-aliasing by default. [*]
When LTO is in effect, this applies equally to the code generation that
may occur at link time, which is why the linker warns about unexpected
differences in type definitions between the intermediate representations
that are present in the object files being linked. This may result in
warnings such as the one below, even if -fno-strict-aliasing is used:
MdePkg/Include/Library/BaseLib.h:1712:1:
warning: type of 'StrToGuid' does not match original declaration
[-Wlto-type-mismatch]
StrToGuid (
^
MdePkg/Library/BaseLib/SafeString.c:1506:1:
note: 'StrToGuid' was previously declared here
StrToGuid (
^
MdePkg/Library/BaseLib/SafeString.c:1506:1:
note: code may be misoptimized unless -fno-strict-aliasing is used
This warning is inadvertently triggered when linking BASE libraries built
with -mstrict-align into modules of types other than SEC or PEI, since the
types are subtly different, even though the use of code that maintains
strict alignment in a module that does not care about this is unlikely to
cause problems. And even if it did, it would still only affect code built
with -fstrict-aliasing enabled, which we disable unconditionally. So let's
just silence the warning by passing -Wno-lto-type-mismatch.
[*] Leif adds: "-fstrict-aliasing is GCC default, because it is a
restriction in the C language. Because it's a bit non-obvious, things
can go hilariously wrong in very non-obvious ways, and the potential
optimization gains are unlikely to be generally relevant,
-fno-strict-aliasing is a sensible thing to always have set (like we
do)."
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
For historical reasons, GCC builds for ARM and AARCH64 pass the
-save-temps command line option to GCC, which instructs the compiler
to preserve intermediate files, i.e., preprocessor output and generated
assembler. Given that this clutters up the Build directory, and slows
down the build, let's remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PI 1.5 spec has minor update to the Data parameter for PEI
GetVariable(), and no real functional behavior change.
The modifier of Data parameter:
OUT VOID *Data
->
OUT VOID *Data OPTIONAL
The comments of Data parameter:
Data Points to the buffer which will hold the returned variable value.
->
Data Points to the buffer which will hold the returned variable value.
May be NULL with a zero DataSize in order to determine the size of the buffer needed.
The patch is to follow the spec to update the implementation.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PI 1.5 spec has minor update to the Data parameter for PEI
GetVariable(), and no real functional behavior change.
The modifier of Data parameter:
OUT VOID *Data
->
OUT VOID *Data OPTIONAL
The comments of Data parameter:
Data Points to the buffer which will hold the returned variable value.
->
Data Points to the buffer which will hold the returned variable value.
May be NULL with a zero DataSize in order to determine the size of the buffer needed.
The patch is to follow the spec to update the definition.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch updates the HTTP Boot driver to install a default HTTP Callback protocol
if the platform doesn't provide one. This callback implementation will print the
boot file download progress in percentage format.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Return EFI_INVALID_PARAMETER in LocateProtocol for Protocol==NULL to
follow UEFI 2.7 spec
PiSmmCore is also updated as the EFI_SMM_SYSTEM_TABLE2.SmmLocateProtocol
is reusing the definition of EFI_LOCATE_PROTOCOL.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When building without LTO, gcc incorrectly resolves the hazards for
'PciRegBase’ when inlining, leading to "may be used uninitialized"
warnings (and hence build failure with -Werror).
Eliminate this warning by explicitly initializing the variable to 0.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=601
When installing configuration table and the original
gDxeCoreST->ConfigurationTable[] buffer happen to be not big enough to
add a new table, the CoreInstallConfigurationTable() enter the branch
of line 113 in InstallConfigurationTable.c to free the old
gDxeCoreST->ConfigurationTable[] buffer and allocate a new bigger one.
The problem happens at line 139 CoreFreePool(), which is to free the
old gDxeCoreST->ConfigurationTable[] buffer. The CoreFreePool()'s
behavior is to free the buffer firstly, then call the
InstallMemoryAttributesTableOnMemoryAllocation (PoolType) to update
the EfiRuntimeServices type memory info, the
CoreInstallConfigurationTable() will be re-entered by CoreFreePool()
in its calling stack, then use-after-free read error will happen at
line 59 of InstallConfigurationTable.c and use-after-free write error
will happen at line 151 and 152 of InstallConfigurationTable.c.
The patch is to update System table to the new table pointer before
calling CoreFreePool() to free the old table.
The case above is in DxeCore, but not in PiSmmCore.
The change in PiSmmCore is to be consistent with DxeCore.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Steven Shi <steven.shi@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Steven Shi <steven.shi@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=592
In function UpdateConsoleContent, we compare console name
with "ErrOut" string to check whether the content in console
Error device page has been changed. But when call function
UpdateConsoleContent, we pass console name as "ConErr" by mistake.
This patch is to fix the inconsistent issue.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Current code for case "TPM not working properly" uses the predefined
macro __FILE__ in debug format string, but uses predefined macro
__LINE__ as parameter, and it also uses multiple pairs of "" in debug
format string.
To be simple and clear, this patch is to update the code to just use
"DriverEntry: TPM not working properly\n" as the debug message.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Amy Chan <amy.chan@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Found few instances where IPv4 and DHCPv4 spelled incorrectly
as IP4 and DHCP4 respectively.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
STR_GEN_ERR_NOT_FOUND is added and currently is only
used by alias command. This string template can be used
by other commands as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
Commit 4275f38507 ("OvmfPkg/AcpiPlatformDxe: alloc blobs from 64-bit
space unless restricted") introduced a variable which is [incorrectly]
identified by GCC as being potentially uninitialized. So let's just set
it to NULL before use.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Couple of instances had IP4 mentioned, instead of IPv4.
Changing all to IPv4 to maintain consistency.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
The Readme.txt contains instructions about how to integrate Shell
into Nt32. Actually Nt32 already contains a macro USE_OLD_SHELL to
choose OLD or NEW Shell.
So remove this txt file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
... by narrower than 8-byte ADD_POINTER references.
Introduce the CollectAllocationsRestrictedTo32Bit() function, which
iterates over the linker/loader script, and collects the names of the
fw_cfg blobs that are referenced by QEMU_LOADER_ADD_POINTER.PointeeFile
fields, such that QEMU_LOADER_ADD_POINTER.PointerSize is less than 8. This
means that the pointee blob's address will have to be patched into a
narrower-than-8 byte pointer field, hence the pointee blob must not be
allocated from 64-bit address space.
In ProcessCmdAllocate(), consult these restrictions when setting the
maximum address for gBS->AllocatePages(). The default is now MAX_UINT64,
unless restricted like described above to the pre-patch MAX_UINT32 limit.
In combination with Ard's QEMU commit cb51ac2ffe36 ("hw/arm/virt: generate
64-bit addressable ACPI objects", 2017-04-10), this patch enables
OvmfPkg/AcpiPlatformDxe to work entirely above the 4GB mark.
(An upcoming / planned aarch64 QEMU machine type will have no RAM under
4GB at all. Plus, moving the allocations higher is beneficial to the
current "virt" machine type as well; in Ard's words: "having all firmware
allocations inside the same 1 GB (or 512 MB for 64k pages) frame reduces
the TLB footprint".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This patch is used to update supplicant.h and wifi2.h
to meet UEFI 2.7 definition. Add EfiSupplicant80211PMK
field in EFI_SUPPLICANT_DATA_TYPE and change **NetworkDesc
to NetworkDesc[1] in EFI_80211_GET_NETWORKS_RESULT.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Fix the bug that use same FMP_PAYLOAD in different capsule file. Because
in previous FMP generation, the FMP already be generated, so we don't
need to regenerate again.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Fix a Incremental build failure. The case is: Both A and B package will
include a same .h file, and in the driver's packages section, A
package is listed before B package, so we will use the .h file in the A
package and build success, then we directly delete the .h file in package
A, it cause increment build failure since in the AutoGenTimeStamp file
the .h file in A can't be found.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The original code expects the Unicode stream from pipe doesn't
contains the Unicode BOM.
But that's not true.
Commit [9ed21946c7] changes
CreateFileInterfaceMem() to add the BOM for Unicode stream.
When parse pipe support was firstly added, a private implementation
ParseReturnStdInLine() was created to specially handle
the Unicode stream without BOM. Since now the Unicode steam contains
BOM, the private implementation can be removed and
ShellFileHandleReturnLine() can be used directly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
UEFI Spec 2.7 introduces BluetoothAttribute and BluetoothLeConfig
protocols. The patch adds the definitions for them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
UEFI spec 2.7 adds new EFI_BLUETOOTH_CONFIG_DATA_TYPE types.
The patch adds them to the header file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=577
Currently the SmmIsBufferOutsideSmmValid() function in SmmMemLib.c will
ASSERT in certain conditions. Since this function is a "test" function,
it should not be making decisions on how to handle a failure.
Handling a failure should be left to the caller.
This patch is to remove ASSERT(FALSE) at line 178 of SmmMemLib.c.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This path is to refine the PXE boot displayed information so as to
in line with NetworkPkg/UefiPxeBcDxe driver.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Currently implementation doesn't accept the input during the user
is trying to select the PXE BootMenu from option 43. This path is
to fix that problem.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
alias in UEFI Shell is case insensitive.
Old code saves the alias to variable storage without
converting the alias to lower-case, which results
upper case alias setting doesn't work.
The patch converts the alias to lower case before saving
to variable storage.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Tapan Shah <tapandshah@hpe.com>
Some USB devices don't report data periodically through Int
Transfer. They report data only when be asked. If the TRB
is not removed from the XHCI HW, when next time HOST asks
data again, the data is reported but consumed by the previous
TRB, which results the HOST thinks data never comes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When "reconnect -r" is typed in shell, UsbFreeInterface() is called
to uninstall the UsbIo and DevicePath. But When a UsbIo is opened
by a driver and that driver rejects to close the UsbIo in Stop(),
the uninstall doesn't succeed.
But UsbFreeInterface () frees the DevicePath memory without check
whether the uninstall succeeds.
It leads to the DXE core database contain a DevicePath instance but
that instance's memory is freed.
Assertion happens when someone calls InstallProtocol(DevicePath)
because the InstallProtocol() checks all DevicePath instance to
find whether the same one exits in database.
We haven't seen any USB device driver which rejects to close UsbIo
in Stop(), but it's very likely.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
After Debian's toolchain switched to PIE by default, our edk2 builds began
to fail to build (GCC49 w/ gcc 6.3). This patch fixes the build by forcing
off PIE for both ARM and AARCH64 builds.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: dann frazier <dannf@debian.org>
Add -fno-pic as well for ARM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=510
The commit fills the 'Interval' field of the Endpoint Context data for
isochronous endpoints. It will resolve the error when a Configure
Endpoint Command is sent to an isochronous endpoint.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=567
In functions DxePrintLibPrint2ProtocolVaListToBaseList() and
InternalPrintLibSPrintMarker(), when processing ASCII format strings, if
the format string walker pointer 'Format' is pointing at the end of the
format string (i.e. '\0'), the following expression:
*(Format + 1)
will read an undefined value.
Though this value won't affect the functionality, since it will be masked
by variable 'FormatMask':
(*(Format + 1) << 8)) & FormatMask
(FormatMask is 0xff for ASCII format string)
This commit adds additional logic to avoid reading undefined content.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=567
In function BasePrintLibSPrintMarker(), when processing ASCII format
strings, if the format string walker pointer 'Format' is pointing at the
end of the format string (i.e. '\0'), the following expression:
*(Format + 1)
will read an undefined value.
Though this value won't affect the functionality, since it will be masked
by variable 'FormatMask':
(*(Format + 1) << 8)) & FormatMask
(FormatMask is 0xff for ASCII format string)
This commit adds additional logic to avoid reading undefined content.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
For the following two functions:
DevPathFromTextBluetooth()
DevPathToTextBluetooth()
The Bluetooth device address "UINT8 Address[6]" is displayed with the
order from Address[5] to Address[0]. This commit reverses the order.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
According to the PI spec, Volume 3,
EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL.EraseBlocks():
> The variable argument list is a list of tuples. Each tuple describes a
> range of LBAs to erase and consists of the following:
> * An EFI_LBA that indicates the starting LBA
> * A UINTN that indicates the number of blocks to erase
(NB, in edk2, EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL is a typedef to
EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL.)
In this driver, the NumOfLba local variable is defined with type UINTN,
but the TYPE argument passed to VA_ARG() is UINT32. Fix the mismatch.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kelly Steele <kelly.steele@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reported-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
According to the PI spec, Volume 3,
EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL.EraseBlocks():
> The variable argument list is a list of tuples. Each tuple describes a
> range of LBAs to erase and consists of the following:
> * An EFI_LBA that indicates the starting LBA
> * A UINTN that indicates the number of blocks to erase
(NB, in edk2, EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL is a typedef to
EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL.)
In this driver, the NumOfLba local variable is defined with type UINTN,
but the TYPE argument passed to VA_ARG() is UINT32. Fix the mismatch.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Reported-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
According to the PI spec, Volume 3,
EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL.EraseBlocks():
> The variable argument list is a list of tuples. Each tuple describes a
> range of LBAs to erase and consists of the following:
> * An EFI_LBA that indicates the starting LBA
> * A UINTN that indicates the number of blocks to erase
(NB, in edk2, EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL is a typedef to
EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL.)
In this driver, the NumOfLba local variable is defined with type UINTN,
but the TYPE argument passed to VA_ARG() is UINT32. Fix the mismatch.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Reported-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Replace a <LF> line ending that was introduced inadvertently by a
recent commit with the correct <CR><LF>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
If APIC ID values are changed during AP functions execution, we need to update
new APIC ID values in local data structure accordingly.
But if APIC mode change happened during AP function execution, we do not support
APIC ID value changed.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Current X2APIC is enabled in MpInitLib (used by CpuMpPei and CpuDxe) to follow
SDM suggestion. That means we only enable X2APIC if we found there are any
initial CPU ID value >= 255.
This patch is to provide one chance for platform to enable X2APIC even there is
no any initial CPU ID value >= 255.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
According to the PI spec, Volume 3,
EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL.EraseBlocks():
> The variable argument list is a list of tuples. Each tuple describes a
> range of LBAs to erase and consists of the following:
> * An EFI_LBA that indicates the starting LBA
> * A UINTN that indicates the number of blocks to erase
(NB, in edk2, EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL is a typedef to
EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL.)
In this driver, the NumOfLba local variable is defined with type UINTN,
but the TYPE argument passed to VA_ARG() is UINT32. Fix the mismatch.
Cc: David Wei <david.wei@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Reported-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Correct the if condition expression for DatumType == 'VOID*'. Current
this condition is not work since the DatumType is changed before we do
the value judgement.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=572
Update X64 AsmFuncs.S to resolve a build failure using the
XCODE5 tool chain. This change updates AsmFuncs.S to match
AsmFuncs.asm and AsmFuncs.nasm.
The error generated in XCODE5 build is:
error: invalid instruction mnemonic 'movzxw'
movzxw 8(%rax), %rax
^~~~~~
The correct instruction is
movzwq 8(%rax), %rax
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Andrew Fish <afish@apple.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Some builds of GCC/binutils will default to using the GNU flavor of
the symbol hash table, and will emit it into a section called .gnu.hash
rather than .hash. We have no use for its contents, and GenFw ignores
it anyway, so it shouldn't really matter what we do with it.
However, due to a workaround for AARCH64 we have in GenFw to deal with
older GCCs that corrupt section-based relocations when merging sections
during the final link, we need the ELF and PE/COFF views of the binary
to be identical. Since we don't place the .gnu.hash section explicitly,
it may end up at the beginning of the ELF binary, causing other sections
to be shifted in the ELF view but not in the PE/COFF view.
So let's add .gnu.hash to the GCC linker script. We don't care about its
contents so add it to the /DISCARD/ section.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=568
Use fixed data type in data structure and make the structure
be natural aligned.
Without this update, the code must assume DXE and SMM are using
same data type (same size of UINTN), but it may be not true at
some case, for example, after standalone SMM feature is enabled.
With this update, the data structure will be phase independent
and convenient for consumer to parse the data.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=566
In function InternalShellPrintWorker(), if the string in variable
'mPostReplaceFormat2' starts with character L'%', the following
expression:
*(ResumeLocation-1) == L'^' at line 2831
will read an undefined value before the starting of string
'mPostReplaceFormat2'.
This commit adds additional logic to avoid reading undefined content.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
We meet a corner case that build different DSC file, but the DSC file use
same build output directory, and the different DSC file use a same PCD
with different Pcd Type, it cause build failure.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
During incremental build, we meet the bug that the different drivers use
the different token for the same DynamicPcd.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Xen gained support for the 4MB flash image in Xen commit 0d6968635ce5
("hvmloader: avoid tests when they would clobber used memory",
2017-05-19), which is part of Xen 4.9.0-rc6.
The previously default 2MB can be explicitly selected with
-D FD_SIZE_2MB
or
-D FD_SIZE_IN_KB=2048
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
(cherry picked from commit bba8dfbec3)
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
[lersek@redhat.com: reference Xen commit in commit message]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=565
Fix NASM compatibility issues with XCODE5 tool chain.
The XCODE5 tool chain for X64 builds using PIE (Position
Independent Executable). For most assembly sources using
PIE mode does not cause any issues.
However, if assembly code is copied to a different address
(such as AP startup code in the MpInitLib), then the
X64 assembly source must be implemented to be compatible
with PIE mode that uses RIP relative addressing.
The specific changes in this patch are:
* Use LEA instruction instead of MOV instruction to lookup
the addresses of functions.
* The assembly function RendezvousFunnelProc() is copied
below 1MB so it can be executed as part of the MpInitLib
AP startup sequence. RendezvousFunnelProc() calls the
external function InitializeFloatingPointUnits(). The
absolute address of InitializeFloatingPointUnits() is
added to the MP_CPU_EXCHANGE_INFO structure that is passed
to RendezvousFunnelProc().
Cc: Andrew Fish <afish@apple.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=554
Update LogoDxe module to print a DEBUG() message and exit
with an error instead of ASSERT_EFI_ERROR() if the HII
Image Package with the logo image is not present.
If a tool chain does not support generation of PE/COFF
resource sections, then this module can not produce the logo
from an HII Image Package. XCODE5 is an example of a tool
chain that does not currently support generation of PE/COFF
resource sections.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Andrew Fish <afish@apple.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
According to Section 2.3.6 of the "UEFI Specification 2.6 Errata A";
the primary CPU must be configured such that 'Timer access must be
provided to non-secure EL1 and EL0 by setting bits EL1PCTEN and
EL1PCEN in register CNTHCTL_EL2.'
This commit adds this missing set-up to the PrePi and PrePeiCore
modules.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
KeyOption points to a buffer holding the content of Key####.
So its size is smaller than EFI_BOOT_MANAGER_KEY_OPTION.
Old code to assign value to KeyOption->OptionNumber modifies
the memory outside of the KeyOption buffer.
The patch fixes this bug.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Add more NULL pointer checks before using them in DhGenerateKey and
Pkcs7GetCertificatesList functions to eliminate possible dereferenced
pointer issue.
Cc: Ting Ye <ting.ye@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ting Ye <ting.ye@intel.com>
Reorganize the statements for XCODE5 to match other tool
chains and remove dependency on XCLANG and XCODE32
Cc: Andrew Fish <afish@apple.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=561
Update BaseTools/Conf/tools_def.template to add the define
-D NO_MSABI_VAARGS
To CC_FLAGS for X64 XCODE5 builds.
The llvm/clang compiler used in XCODE5 builds supports the
_ms_ versions of the vararg builtins, but the compiler
generates build errors.
The recommendation from the XCODE5 experts is to never use
the _ms_ version of the vararg builtins. The define
NO_MSABI_VARARGS is already supported in MdePkg/Include/Base.h
and forces the use the standard vararg builtins.
Cc: Andrew Fish <afish@apple.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=559
The XCODE5 tool chain has a FAMILY of GCC. The
GCC statements in the [BuildOptions] section add
flags that are not compatible with XCODE5. Add
empty XCODE5 statements in [BuildOptions] sections
to prevent the use of the GCC flags in XCODE5
builds.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Andrew Fish <afish@apple.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=556
NASM requires read-only data sections to use the section
name .rodata. This fix changes .rdata to .rodata.
The build failure from use of .rdata is seen when using
the XCODE5 tool chain.
Section "7.8.1 macho extensions to the SECTION Directive"
of the NASM documentation at http://www.nasm.us/doc/
describes the section name requirements.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Andrew Fish <afish@apple.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=555
Add JMP instruction in SmiEntry.S file that is missing. This
updates SmiEntry.S to match the logic in SmiEntry.asm and
SmiEntry.nasm.
The default BUILDRULEORDER has .nasm higher priority than
.asm or .S, so this issue was not seen with MSFT or GCC
tool chain families. The XCODE5 tool chain overrides the
BUILDRULEORDER with .S higher than .nasm, so this issue
was only seen when using XCODE5 tool chain when IA32 SMM
is enabled.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=553
Remove left shift of negative values that always evaluate
to 0 to address build errors from the llvm/clang compiler
used in the XCODE5 tool chain.
Clang rightfully complains about left-shifting ~DLAB. DLAB is #defined
as 0x01 (an "int"), hence ~DLAB has value (-2) on all edk2 platforms.
Left-shifting a negative int is undefined behavior.
Rather than replacing ~DLAB with ~(UINT32)DLAB, realize that the nonzero
bits of (~(UINT32)DLAB << 7) would all be truncated away in the final
conversion to UINT8 anyway. So just remove (~DLAB << 7).
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
When DynamicEx PCD is only used in PEI code, but not DXE code,
current implementation of DxePcdGetNextTokenSpace does not assign
TmpTokenSpaceBufferCount correctly, but leaves it as initial value,
then DxePcdGetNextTokenSpace may return incorrect token space guid
and status.
This patch is to fix this issue.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
EmuVariableFvbRuntimeDxe currently produces a Firmware Volume Block
protocol that is based on a block map of two blocks, each block having
PcdFlashNvStorageFtwSpareSize for size.
(The total size is 2 * PcdFlashNvStorageFtwSpareSize.)
FaultTolerantWriteDxe in turn expects the block size to be a power of two.
In the 4MB build of OVMF, PcdFlashNvStorageFtwSpareSize is 264KB, which is
not a power of two. In order to equip EmuVariableFvbRuntimeDxe for this
build, shrink the block size to 4KB (EFI_PAGE_SIZE), and grow the block
count from 2 to EFI_SIZE_TO_PAGES(2 * PcdFlashNvStorageFtwSpareSize). The
total size remains
2 * PcdFlashNvStorageFtwSpareSize
--------------------------------- * EFI_PAGE_SIZE
EFI_PAGE_SIZE
Right now EmuVariableFvbRuntimeDxe open-codes the block count of 2 in
various limit checks, so introduce a few new macros:
- EMU_FVB_NUM_TOTAL_BLOCKS, for the LHS of the above product,
- EMU_FVB_NUM_SPARE_BLOCKS for the half of that.
Also rework the FVB protocol members to support an arbitrary count of
blocks.
Keep the invariant intact that the first half of the firmware volume hosts
the variable store and the FTW working block, and that the second half
maps the FTW spare area.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=527
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
According to the PI spec, Volume 3,
EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL.EraseBlocks():
> The variable argument list is a list of tuples. Each tuple describes a
> range of LBAs to erase and consists of the following:
> * An EFI_LBA that indicates the starting LBA
> * A UINTN that indicates the number of blocks to erase
(NB, in edk2, EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL is a typedef to
EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL.)
In this driver, the NumOfLba local variable is defined with type UINTN,
but the TYPE argument passed to VA_ARG() is UINT32. Fix the mismatch.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Reported-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
According to the PI spec, Volume 3,
EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL.EraseBlocks():
> The variable argument list is a list of tuples. Each tuple describes a
> range of LBAs to erase and consists of the following:
> * An EFI_LBA that indicates the starting LBA
> * A UINTN that indicates the number of blocks to erase
(NB, in edk2, EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL is a typedef to
EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL.)
In this driver, the NumOfLba local variable is defined with type UINTN,
but the TYPE argument passed to VA_ARG() is UINT32. Fix the mismatch.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
According to the PI spec, Volume 3,
EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL.EraseBlocks():
> The variable argument list is a list of tuples. Each tuple describes a
> range of LBAs to erase and consists of the following:
> * An EFI_LBA that indicates the starting LBA
> * A UINTN that indicates the number of blocks to erase
(NB, in edk2, EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL is a typedef to
EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL.)
In this driver, the NumOfLba local variable is defined with type UINTN,
but the TYPE argument passed to VA_ARG() is UINT32. Fix the mismatch.
Cc: Andrew Fish <afish@apple.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Reported-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
According to the PI spec, Volume 3,
EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL.EraseBlocks():
> The variable argument list is a list of tuples. Each tuple describes a
> range of LBAs to erase and consists of the following:
> * An EFI_LBA that indicates the starting LBA
> * A UINTN that indicates the number of blocks to erase
(NB, in edk2, EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL is a typedef to
EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL.)
In this driver, the NumOfLba local variable is defined with type UINTN,
but the TYPE argument passed to VA_ARG() is UINT32. Fix the mismatch.
In addition, update the DEBUG macro invocation where NumOfLba is formatted
with the %d conversion specifier: UINTN values should be converted to
UINT64 and printed with %Lu or %Lx for portability between 32-bit and
64-bit.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Reported-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In the previous patch we had to add two explicit Null resolutions, but
here we can remove five PeiPcdLib ones, after setting the default to it.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Currently the default (module type independent) PcdLib resolution is to
BasePcdLibNull.inf, which is inherited by all PEIMs. In the next patch,
we'll flip the PEIM default resolution to PeiPcdLib.inf, but in order to
keep that patch both correct and simple to review, we should spell out the
Null resolution for those two PEIMs (ReportStatusCodeRouterPei and
StatusCodeHandlerPei) that are now the only ones that don't specify an
explicit resolution.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
For the emulated variable store, PlatformPei allocates reserved memory (as
early as possible, so that the address remains the same during reboot),
and PcdEmuVariableNvStoreReserved carries the address to
EmuVariableFvbRuntimeDxe.
However, EmuVariableFvbRuntimeDxe is excluded from the SMM_REQUIRE build,
and then noone consumes PcdEmuVariableNvStoreReserved. Don't waste
reserved memory whenever that's the case.
(Even a dynamic default for PcdEmuVariableNvStoreReserved would be
unnecessary; but that way the PcdSet64S() call in the
ReserveEmuVariableNvStore() function doesn't compile.)
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
"MdeModulePkg/MdeModulePkg.dec" declares PcdVariableStoreSize like this:
> The size of volatile buffer. This buffer is used to store VOLATILE
> attribute variables.
There is no inherent reason why the size of the volatile variable store
should match the same of the non-volatile variable store. Indeed flash
variables in the 4MB build work fine without this equality.
However, OvmfPkg/EmuVariableFvbRuntimeDxe uses PcdVariableStoreSize to
initialize the non-volatile VARIABLE_STORE_HEADER too. (Presumably based
on the fact that ultimately that storage will not be permanent.) When
using EmuVariableFvbRuntimeDxe in the 4MB build, the mismatch between the
two mentioned PCDs (which is apparent through EmuVariableFvbRuntimeDxe's
VARIABLE_STORE_HEADER) triggers an assertion in the variable driver:
> ASSERT MdeModulePkg/Universal/Variable/RuntimeDxe/Variable.c(3772):
> mNvVariableCache->Size == VariableStoreLength
Bringing PcdVariableStoreSize in sync with PcdFlashNvStorageVariableSize
fixes this. It also happens to ensure a volatile store size in the 4MB
build that equals the non-volatile store size, which likely doesn't hurt
for symmetry.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: b24fca0575
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This protocol is to abstract DMA access from IOMMU.
1) Intel "DMAR" ACPI table.
2) AMD "IVRS" ACPI table
3) ARM "IORT" ACPI table.
There might be multiple IOMMU engines on one platform.
For example, one for graphic and one for rest PCI devices
(such as ATA/USB).
All IOMMU engines are reported by one ACPI table.
All IOMMU protocol provider should be based upon ACPI table.
This single IOMMU protocol can handle multiple IOMMU engines on one system.
This IOMMU protocol provider can use UEFI device path to distinguish
if the device is graphic or ATA/USB, and find out corresponding
IOMMU engine.
The IOMMU protocol provides 2 capabilities:
A) Set DMA access attribute - such as write/read control.
B) Remap DMA memory - such as remap above 4GiB system memory address
to below 4GiB device address.
It provides AllocateBuffer/FreeBuffer/Map/Unmap for DMA memory.
The remapping can be static (fixed at build time) or dynamic (allocate
at runtime).
4) AMD "SEV" feature.
We can have an AMD SEV specific IOMMU driver to produce IOMMU protocol,
and manage SEV bit.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Leo Duran <leo.duran@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Previous patch Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Previous patch Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Leo Duran <leo.duran@amd.com>
For function UfsPassThruGetTargetLun(), the length of the input device
node specified by 'DevicePath' should be compared with the size of
'UFS_DEVICE_PATH' rather than the size of 'SCSI_DEVICE_PATH'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This patch updated the CArray PCD override format from B"{}" to H"{}"
which align to build spec. Besides, it also do the clean up for the
function BuildOptionPcdValueFormat.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch for the bug FixedPcdGetPtr report failure for the CArray type
Pcd. 1) correct the Fixed Pcd list; 2) correct the Fixed Pcd in Library
AutoGen file to same with Driver AutoGen file format.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The patch dumps memory map information for all memory types.
But to follow the SFO format of "memmap" defined in Shell 2.2 spec,
the patch doesn't dump the memory map information for OEM/OS
memory types. But it does include the OEM/OS memory in the total
size in SFO format.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The patch changes Buffer to Descriptors, changes
(UINT8 *Walker) to (EFI_MEMORY_DESCRIPTOR *Walker).
The change makes lots of type conversion unnecessary.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
This patch adds support for showing the file name associated with a
LoadedImageProtocol file path. This is a behavior that was present in
the old shell but has been lost in the new shell.
For example, using 'dh -v' in the old shell:
Handle D3 (3A552218)
Image (3A54C918) File:MicrocodeUpdate
ParentHandle..: 3A666398
vs. the new shell:
D3: 3A552218
LoadedImage
Revision......: 0x00001000
ParentHandle..: 3A666398
Here's what the output of 'dh -v' looks like after this patch:
D3: 3A552218
LoadedImage
Name..........: MicrocodeUpdate
Revision......: 0x00001000
ParentHandle..: 3A666398
This seems like useful information for the shell to display.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Westfahl <jeff.westfahl@ni.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
This patch changes the order of operations to make sure we can open the
LoadedImageProtocol before getting the format string. This should not
affect functionality, and makes the next patch easier to review.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Westfahl <jeff.westfahl@ni.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
This patch adds support for displaying a text representation of the file
path associated with a LoadedImageProtocol. This is a behavior that was
present in the old shell but has been lost in the new shell.
For example, using 'dh -v' in the old shell:
FilePath......: FvFile(F3331DE6-4A55-44E4-B767-7453F7A1A021)
FilePath......: \EFI\BOOT\BOOTX64.EFI
vs. the new shell:
FilePath......: 3A539018
FilePath......: 3A728718
This seems like useful information for the shell to display.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Westfahl <jeff.westfahl@ni.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
If PcdCpuHotPlugSupport is TRUE, gSmst->NumberOfCpus will be the
PcdCpuMaxLogicalProcessorNumber. If gSmst->SmmStartupThisAp() is invoked for
those un-existed processors, ASSERT() happened in ConfigSmmCodeAccessCheck().
This fix is to check if ProcessorId is valid before invoke
gSmst->SmmStartupThisAp() in ConfigSmmCodeAccessCheck() and to check if
ProcessorId is valid in InternalSmmStartupThisAp() to avoid unexpected DEBUG
error message displayed.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
This patch correct the VOID* PatchPcd Size info generated in the
Library's autogen file. Update it to use the MaxDatumSize.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
DHCP4 service allows only one of its children to be configured in the active
state. If the DHCP4 D.O.R.A started by IP4 auto configuration and has not
been completed, the Dhcp4 state machine will not be in the right state for
the iSCSI to start a new round D.O.R.A. So, we need to switch it's policy to
static.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Remove the functions now provided by TimeBaseLib from
PL031RealTimeClockLib. Add TimeBaseLib resolution to ArmVirtPkg
in same commit to prevent breakage.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Some generic RTC helper functions were broken out from the PL031
library for use with other RTCs in OpenPlatformPkg. Import the code back
here, realigning it with the current state of PL031RealTimeClockLib to
simplify comparisons.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Currently all the network interfaces share the one recycled transmit buffer
array, which is used to store the recycled buffer address. However, those
recycled buffers are allocated by the different MNP interface if the multiple
network interfaces existed. Then, SNP GetStatus may return one recycled transmit
buffer address to the another MNP interface, which may result in the MNP driver
hang after 'reconnect -r' operation.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Currently, DNS driver configure the dhcp message type to inform
when building dhcp packet to get dns info from, but it not works
with dhcp server deployed on linux system. However it works well
when changed to request type.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
The RFC1323 which defines the TCP window scale option has been obsoleted by RFC7323.
This patch is to follow the RFC7323 to address the TCP window retraction problem
when a non-zero scale factor is used.
The changes has been test in high packet loss rate network by using HTTP boot and
iSCSI file read/write.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The RFC1323 which defines the TCP window scale option has been obsoleted by RFC7323.
This patch is to follow the RFC7323 to address the TCP window retraction problem
when a non-zero scale factor is used.
The changes has been test in high packet loss rate network by using HTTP boot and
iSCSI file read/write.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Moving Right window edge to the left on sender side without additional check
can lead to the TCP deadlock, when receiver ACKs proper segment, while sender
discards it for future ACK. To prevent this add check if usable window (or
shrink amount in this case) is bigger then receiver's window scale factor.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Andrey Tepin <atepin@kraftway.ru>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Moving Right window edge to the left on sender side without additional check
can lead to the TCP deadlock, when receiver ACKs proper segment, while sender
discards it for future ACK. To prevent this add check if usable window (or
shrink amount in this case) is bigger then receiver's window scale factor.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Andrey Tepin <atepin@kraftway.ru>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The MTRR calculation algorithm contains a bug that when left
subtraction cannot produce better MTRR solution, it forgets
to restore the BaseAddress/Length so that MtrrLibGetMtrrNumber()
returns bigger value of actual required MTRR numbers.
As a result, the MtrrLib reports OutOfResource but actually the
MTRR is enough.
MEMORY_RANGE mC[] = {
0, 0x100000, CacheUncacheable,
0x100000, 0x89F00000, CacheWriteBack,
0x8A000000, 0x75000000, CacheUncacheable,
0xFF000000, 0x01000000, CacheWriteProtected,
0x100000000, 0x7F00000000, CacheUncacheable,
0xFC240000, 0x2000, CacheWriteCombining // <-- trigger the error
};
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=514
The FvHandle input to InternalGetSectionFromFv() may be NULL,
then ASSERT will appear. It is because the LoadedImage->DeviceHandle
returned from InternalImageHandleToFvHandle() may be NULL.
For example for DxeCore, there is LoadedImage protocol installed
for it, but the LoadedImage->DeviceHandle could not be initialized
before the FV2 (contain DxeCore) protocol is installed.
This patch is to update InternalGetSectionFromFv() to return
EFI_NOT_FOUND directly for NULL FvHandle.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add the error check that A PCD can only use one type for all source
modules.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In commit b24fca0575 ("OvmfPkg: introduce 4MB flash image (mainly) for
Windows HCK", 2017-04-29), I changed PcdFlashNvStorageFtwSpareSize to
264KB, in the then-new default 4MB build.
While PcdFlashNvStorageFtwSpareSize remains exactly half of the entire
non-volatile store (which is 528KB), 264KB isn't itself a power of two.
This triggers an assertion failure in AllocateAlignedRuntimePages() when
PlatformPei calls it from the ReserveEmuVariableNvStore() function,
passing PcdFlashNvStorageFtwSpareSize as the Alignment parameter:
> ASSERT MdePkg/Library/PeiMemoryAllocationLib/MemoryAllocationLib.c(196):
> (Alignment & (Alignment - 1)) == 0
Round up the alignment to the next power of two if necessary.
Fixes: b24fca0575
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This reverts commit bba8dfbec3.
The 264KB size introduced for the NV spare area in commit b24fca0575
("OvmfPkg: introduce 4MB flash image (mainly) for Windows HCK",
2017-04-29) breaks the "-bios" (emulated varstore) use case. Until we sort
that out, revert the default build to the 2MB image.
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Add the size check for invalid format detection in AllowedDb,
RevokedDb and TimeStampDb list contents.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Update package version of CryptoPkg to 0.97.
Cc: Ting Ye <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Ting Ye <ting.ye@intel.com>
UEFI2.6 have been added in MdePkg. Update DEC and DSC version to
reflect those changes in MdePkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
The "ConfirmSetOfLargeVariable" test case of the Secure Boot Logo Test
("Microsoft.UefiSecureBootLogo.Tests") suite in the Microsoft Hardware
Certification Kit sets a 32 KB large non-authenticated variable.
In the FD_SIZE_4MB build, our live varstore is now 256 KB big, so we can
accommodate this. Set both PcdMaxVariableSize and PcdMaxAuthVariableSize
to 0x8400 -- beyond DataSize=0x8000 from the HCK test, we need some room
for the variable name and attributes as well.
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The "Confirm64KilobytesOfUnauthenticatedVariableStorage" test case of the
Secure Boot Logo Test ("Microsoft.UefiSecureBootLogo.Tests") suite in the
Microsoft Hardware Certification Kit expects to be able to populate the
variable store up to roughly 64 KB, with a series of 1 KB sized,
unauthenticated variables. OVMF's current live varstore area is too small
for this: 56 KB.
Introduce the FD_SIZE_4MB build macro (equivalently, FD_SIZE_IN_KB=4096),
which
- enlarges the full flash image to 4MB -- QEMU supports up to 8MB, see
FLASH_MAP_BASE_MIN in "hw/i386/pc_sysfw.c" --,
- inside that, grows the varstore area / pflash chip to 528 KB, and within
it, the live area from 56 KB to 256 KB.
Importantly, a firmware binary built with -D FD_SIZE_4MB will *not* be
compatible with a variable store that originates from a variable store
template built *without* -D FD_SIZE_4MB. This is the reason for the large
increase, as every such change breaks compatibility between a new firmware
binary and old varstore files.
Enlarging the varstore does not impact the performance of normal
operations, as we keep the varstore block size 4KB. The performance of
reclaim is affected, but that is expected (since reclaim has to rework the
full live area). And, reclaim occurs proportionally less frequently.
While at it, the FVMAIN_COMPACT volume (with the compressed FFS file in
it) is also enlarged significantly, so that we have plenty of room for
future DXEFV (and perhaps PEIFV) increments -- DXEFV has been growing
steadily, and that increase shows through compression too. Right now the
PEIFV and DXEFV volumes need no resizing.
Here's a summary:
Description Compression type Size [KB]
------------------------- ----------------- ----------------------
Non-volatile data storage open-coded binary 128 -> 528 ( +400)
data
Variable store 56 -> 256 ( +200)
Event log 4 -> 4 ( +0)
Working block 4 -> 4 ( +0)
Spare area 64 -> 264 ( +200)
FVMAIN_COMPACT uncompressed 1712 -> 3360 (+1648)
FV FFS file LZMA compressed
PEIFV uncompressed 896 -> 896 ( +0)
individual PEI uncompressed
modules
DXEFV uncompressed 10240 -> 10240 ( +0)
individual DXE uncompressed
modules
SECFV uncompressed 208 -> 208 ( +0)
SEC driver
reset vector code
For now, the 2MB flash image remains the default.
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
FD_SIZE_xMB defines have existed for flash size selection. They can be
passed as "-D FD_SIZE_xMB" on the command line. Passing multiple of them
at the same time has never been supported; earlier settings on the command
line cannot be overridden.
Introduce the integer valued FD_SIZE_IN_KB macro, which provides the
following improvements:
- several instances of it are permitted on the command line, with the last
one taking effect,
- conditional statements in the DSC and FDF files need only check a single
macro, and multiple values can be checked in a single !if with the ||
operator,
- nested !ifdef / !else ladders can be replaced with flat equality tests,
- in the future, flash sizes can be expressed with a finer than MB
granularity, if necessary.
For now, we're going to preserve the FD_SIZE_xMB defines as convenience
wrappers for FD_SIZE_IN_KB.
FD_SIZE_IN_KB is being added to the DSC files because this way we can
depend on it in both the DSC and FDF files.
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
ASCII characters {|}~ should be printed by DumpHex. The problem is that
if you have a string like
{xizzy}~{foo|bar}~{quux}
in the dumped data, it will not appear as such in the *-delimited ASCII
column to the right, but as
.xizzy...foo.bar...quux.
which is less than ideal.
Most of the commit message was inspired by/shamelessly stolen from
Laszlo's example:
https://lists.01.org/pipermail/edk2-devel/2017-April/010266.html
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Westfahl <jeff.westfahl@ni.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Include XenPlatformHasAcpiDtDxe and PlatformHasAcpiDtDxe in the 32-bit
builds too.
Please see https://bugzilla.tianocore.org/show_bug.cgi?id=524
why it is needed. With this patch my arm uefi VM boots.
Fixes: 3a2c1548fe
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Nerijus Baliūnas <nerijus@users.sourceforge.net>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: move long subj to commit msg body, add short subj]
[lersek@redhat.com: add Fixes reference]
[lersek@redhat.com: keep ACPI DXE modules grouped in QEMU DSCs]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
In case of the DHCP and PXE services on different servers,PXEv6 boot will
failure when DhcpBinl offer received. The issue is caused by the following
reasons:
* PXE Client doesn't append VENDOR_CLASS request parameter, so the
offer replied from DHCP service will not contain VENDOR_CLASS option
(16).
* Once the DhcpBinl offer is selected, the boot discover message should
be sent out to request the bootfile by this offer. Current implementation
always use servers multi-cast address instead of BootFileUrl address in
dhcp6 offer. we should check it first, then decide whether use multi-cast
address or not.
* If DhcpBinl offer is selected, the boot discover message shouldn't
find server ID Option from DhcpBinl offer. That's incorrect because DHCP
service and PXE service on different servers. In such a case, we can ignore
the Server ID Option.
With the above fix in the patch, PXEv6 can boot successfully when DhcpBinl
offer received.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
if the server name expressed as a site local address begain with FEC0
when retrieving from dhcpv6 option 59 boot file url, it incorrectly process it
as a dns name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
if we already established a iSCSI connection from initiator to target
based on IPv4 stack, after using reconnect -r command, we can not rebuild
the session with the windows target, since the server thought the session
is still exist. This issue is caused by wrong place of acquire ownership of
sock lock which lead the iSCSI can not reset the connection correctly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
if we already established a iSCSI connection from initiator to target
based on IPv4 stack, after using reconnect -r command, we can not rebuild
the session with the windows target, since the server thought the session
is still exist. This issue is caused by wrong place of acquire ownership of
sock lock which lead the iSCSI can not reset the connection correctly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Enable HMAC-SHA256 cipher support in SmmCryptLib instance.
Cc: Ting Ye <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Ting Ye <ting.ye@intel.com>
Resolve mainly 'misleading indentation', but also one 'defined but not used'
warning when building with GCC 6 (using GCC5 profile).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Update Rsa2048Sha256GenerateKeys Tool to support the case that
OPENSSL_PATH has space characters.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Update Rsa2048Sha256Sign Tool to support the case that OPENSSL_PATH has
space characters.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Update Pkcs7Sign Tool to support the case that OPENSSL_PATH has space
characters.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When the PCD value is set to TRUE or FALSE, while it is not exchanged to
its int value, it cause error in the function int(Pcd.DefaultValue, 0).
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Commit bd3fc8133b ("ShellPkg/App: Fix memory leak and save resources.",
2016-05-20) added a FreePool() call for Split->SplitStdIn, near end of the
RunSplitCommand(), right after the same shell file was closed with
CloseFile(). The argument was:
> 1) RunSplitCommand() allocates the initial SplitStdOut via
> CreateFileInterfaceMem(). Free SplitStdIn after the swap to fix
> the memory leak.
There is no memory leak actually, and the FreePool() call in question
constitutes a double-free:
(a) This is how the handle is established:
ConvertEfiFileProtocolToShellHandle (
CreateFileInterfaceMem (Unicode),
NULL
);
CreateFileInterfaceMem() allocates an EFI_FILE_PROTOCOL_MEM object and
populates it fully. ConvertEfiFileProtocolToShellHandle() allocates
some administrative structures and links the EFI_FILE_PROTOCOL_MEM
object into "mFileHandleList".
(b) EFI_SHELL_PROTOCOL.CloseFile() is required to close the
SHELL_FILE_HANDLE and to release all associated data. Accordingly,
near the end of RunSplitCommand(), we have:
EfiShellClose()
ShellFileHandleRemove()
//
// undoes the effects of ConvertEfiFileProtocolToShellHandle()
//
ConvertShellHandleToEfiFileProtocol()
//
// note that this does not adjust the pointer value; it's a pure
// type cast
//
FileHandleClose()
FileInterfaceMemClose()
//
// tears down EFI_FILE_PROTOCOL_MEM completely, undoing the
// effects of CreateFileInterfaceMem ()
//
The FreePool() call added by bd3fc8133b conflicts with
SHELL_FREE_NON_NULL(This);
in FileInterfaceMemClose(), so remove it.
This error can be reproduced for example with:
> Shell> map | more
> 'more' is not recognized as an internal or external command, operable
> program, or script file.
which triggers:
> ASSERT MdeModulePkg/Core/Dxe/Mem/Pool.c(624): CR has Bad Signature
with the following stack dump:
> #0 0x000000007f6dc094 in CpuDeadLoop () at
> MdePkg/Library/BaseLib/CpuDeadLoop.c:37
> #1 0x000000007f6dd1b4 in DebugAssert (FileName=0x7f6ed9f0
> "MdeModulePkg/Core/Dxe/Mem/Pool.c", LineNumber=624,
> Description=0x7f6ed9d8 "CR has Bad Signature") at
> OvmfPkg/Library/PlatformDebugLibIoPort/DebugLib.c:153
> #2 0x000000007f6d075d in CoreFreePoolI (Buffer=0x7e232c98,
> PoolType=0x7f6bc1c4) at MdeModulePkg/Core/Dxe/Mem/Pool.c:624
> #3 0x000000007f6d060e in CoreInternalFreePool (Buffer=0x7e232c98,
> PoolType=0x7f6bc1c4) at MdeModulePkg/Core/Dxe/Mem/Pool.c:529
> #4 0x000000007f6d0648 in CoreFreePool (Buffer=0x7e232c98) at
> MdeModulePkg/Core/Dxe/Mem/Pool.c:552
> #5 0x000000007d49fbf8 in FreePool (Buffer=0x7e232c98) at
> MdePkg/Library/UefiMemoryAllocationLib/MemoryAllocationLib.c:818
> #6 0x000000007d4875c3 in RunSplitCommand (CmdLine=0x7d898398,
> StdIn=0x0, StdOut=0x0) at ShellPkg/Application/Shell/Shell.c:1813
> #7 0x000000007d487d59 in ProcessNewSplitCommandLine
> (CmdLine=0x7d898398) at ShellPkg/Application/Shell/Shell.c:2121
> #8 0x000000007d488937 in RunShellCommand (CmdLine=0x7e233018,
> CommandStatus=0x0) at ShellPkg/Application/Shell/Shell.c:2670
> #9 0x000000007d488b0b in RunCommand (CmdLine=0x7e233018) at
> ShellPkg/Application/Shell/Shell.c:2732
> #10 0x000000007d4867c8 in DoShellPrompt () at
> ShellPkg/Application/Shell/Shell.c:1349
> #11 0x000000007d48524d in UefiMain (ImageHandle=0x7e24c898,
> SystemTable=0x7f5b6018) at ShellPkg/Application/Shell/Shell.c:631
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Marvin Häuser <Marvin.Haeuser@outlook.com>
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Fixes: bd3fc8133b
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Marvin Häuser <Marvin.Haeuser@outlook.com>
The "SPLIT_LIST.SplitStdOut" and "SPLIT_LIST.SplitStdIn" members currently
have type (SHELL_FILE_HANDLE *). This is wrong; SHELL_FILE_HANDLE is
already a pointer, there's no need to store a pointer to a pointer.
The error is obvious if we check where and how these members are used:
- In the RunSplitCommand() function, these members are used (populated)
extensively; this function has to be updated in sync.
ConvertEfiFileProtocolToShellHandle() already returns the temporary
memory file created with CreateFileInterfaceMem() as SHELL_FILE_HANDLE,
not as (SHELL_FILE_HANDLE *).
- In particular, the ConvertShellHandleToEfiFileProtocol() calls need to
be dropped as well in RunSplitCommand(), since
EFI_SHELL_PROTOCOL.SetFilePosition() and EFI_SHELL_PROTOCOL.CloseFile()
take SHELL_FILE_HANDLE parameters, not (EFI_FILE_PROTOCOL *).
Given that ConvertShellHandleToEfiFileProtocol() only performs a
type-cast (it does not adjust any pointer values), *and*
SHELL_FILE_HANDLE -- taken by EFI_SHELL_PROTOCOL member functions -- is
actually a typedef to (VOID *) -- see more on this later --, this
conversion error hasn't been caught by compilers.
- In the ProcessNewSplitCommandLine() function, RunSplitCommand() is
called either initially (passing in NULL / NULL; no update needed), or
recursively (passing in Split->SplitStdIn / Split->SplitStdOut; again no
update is necessary beyond the RunSplitCommand() modification above).
- In the UpdateStdInStdOutStdErr() and RestoreStdInStdOutStdErr()
functions, said structure members are compared and assigned to
"EFI_SHELL_PARAMETERS_PROTOCOL.StdIn" and
"EFI_SHELL_PARAMETERS_PROTOCOL.StdOut", both of which have type
SHELL_FILE_HANDLE, *not* (SHELL_FILE_HANDLE *).
The compiler hasn't caught this error because of the fatally flawed type
definition of SHELL_FILE_HANDLE, namely
typedef VOID *SHELL_FILE_HANDLE;
Pointer-to-void silently converts to and from most other pointer types;
among them, pointer-to-pointer-to-void. That is also why no update is
necessary for UpdateStdInStdOutStdErr() and RestoreStdInStdOutStdErr()
in this fix.
(
Generally speaking, using (VOID *) typedefs for opaque handles is a tragic
mistake in all of the UEFI-related specifications; this practice defeats
any type checking that compilers might help programmers with. The right
way to define an opaque handle is as follows:
//
// Introduce the incomplete structure type, and the derived pointer
// type, in both the specification and the public edk2 headers. Note
// that the derived pointer type itself is a complete type, and it can
// be used freely by client code.
//
typedef struct SHELL_FILE *SHELL_FILE_HANDLE;
//
// Complete the structure type in the edk2 internal C source files.
//
struct SHELL_FILE {
//
// list fields
//
};
This way the structure size and members remain hidden from client code,
but the C compiler can nonetheless catch any invalid conversions between
incompatible XXX_HANDLE types.
)
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Marvin Häuser <Marvin.Haeuser@outlook.com>
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The sample instance check if IO resource is valid
one defined in GCD.
A platform may choose add more check to exclude some
other IO resource.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Below value indicate whether network address configured successfully
or not:
Network Device List->MAC->IPv4 Network Configuration->Configured.
This patch is to refine its help info.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
SmramBase should be got from mLMFAConfigurationTable.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In function UfsHcDriverBindingStart(), the return value 'Status' may be
overridden during the original PCI attributes restore process.
This commit refines the logic to avoid such override.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The commit removes the unused field 'EFI_HANDLE Handle' in Ufs host
controller private data structure 'UFS_HOST_CONTROLLER_PRIVATE_DATA'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The SMBIOS Type 0 BIOS segment field is currently displayed in decimal.
Since this field is likely to have a value like 0xE800 or 0xF000, using
hexadecimal seems like a better choice.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Westfahl <jeff.westfahl@ni.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Add "EFIAPI" to UNDI command entry point function according to UEFI calling
convention.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
In case of an async command if updating the submission queue tail
doorbell fails then the command will not be picked up by device and
no completion response will be created. This scenario has to be handled.
Also if we create an AsyncRequest element and insert in the async queue,
it will never receive a completion so in the timer routine this element
won't be freed, resulting in memory leak. Also in case of blocking calls
we should capture the status of updating completion queue head doorbell
register and return it to caller of PassThru.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Suman Prakash <suman.p@samsung.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
v3:
* Add NULL string check.
v2:
* Define new STR_FORM_NETWORK_DEVICE_TITLE_HEAD for L" Network Device "
instead of hard code in the code.
Network device tile (STR_FORM_NETWORK_DEVICE_TITLE) is dynamic adjusted
according the different MAC value. So, the string value shouldn't be treated
as a constant string (Network Device). Otherwise, the display will be
incorrect.
Reproduce: Device Manager->Network Device List, select to enter MAC, then to
press ESC back to previous page, then re-enter, found each enter/ESC operation,
the MAC address display +1.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
v2:
* Define one new internal function to clean the file content.
TlsAuthConfigDxe open file by FileExplorerLib. It need to close
file handler and free file related resource in some cases.
* User enrolls Cert by escape the Config page.
* The Cert is not X509 type.
* User chooses another file after he selected a file.
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Chao Zhang<chao.b.zhang@intel.com>
When PXE10/WFM11a offer received, we should only cache
the first PXE10/WFM11a offer, and discard the others. But
Current we discard all PXE10/WFM11a offer. This patch is
to fix this issue.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
This adds #defines and struct typedefs for the various node types in
the ACPI 6.0 IO Remapping Table (IORT).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jiewen Yao <yiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
When a load option points to a physical UsbIo controller, whose
device path contains UsbClass or UsbWwid node, old logic
unconditionally treats it as a short-form device path and expands
it. But the expanding gets the exactly same device path, and the
device path is passed to BmGetNextLoadOptionDevicePath() which
then passes this device path to BmExpandUsbDevicePath() again.
This causes a infinite recursion.
The patch avoids the USB short-form expanding when the device path
points to a physical UsbIo controller.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
If we set PXEv6 as the first boot option and reboot immediately
after the first successful boot, it will assert. the root cause is
when we set the policy from manual to automatic in PXE driver,
the ip6 Configure item size is already set to zero and other
structures are also released, So it is not needed to perform DAD call
back function which is invoked by Ip6ConfigSetMaunualAddress.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
This solution is equivalent to DXE core.
AllocatePool() allocates POOL_TAIL after the buffer.
This POOL_TAIL is checked at FreePool().
If the there is buffer overflow, the issue can be caught at FreePool().
This patch could also handle the eight-byte aligned allocation
requirement. The discussion related to the eight-byte aligned
allocation requirement is at
https://lists.01.org/pipermail/edk2-devel/2017-April/009995.html.
According to the PI spec (Vol 4, Section 3.2 SmmAllocatePool()):
The SmmAllocatePool() function ... All allocations are eight-byte aligned.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
In the origin codes, the host sets the fDeviceInit flag to initiate device
initialization, but does not check whether the device resets this flag
to indicate the device initialization is completed.
Details can be referred at UFS 2.0 Spec Section 14.2 - Flags.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
When TerminalDxe Start() is called multiple times, the old logic
unconditionally appended the terminal device path candidates to
*Dev (ConInDev/ConOutDev/ErrOutDev), resulting the volatile storage
is full.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
OpenPlatformPkg (https://git.linaro.org/uefi/OpenPlatformPkg.git) holds a
driver for the SMSC LAN91x, used (among other places) in several ARM Ltd.
software system models.
Import it to EDK2 EmbeddedPkg in preparation for migrating those model
platforms to edk2-platforms.
On the way, update the files to pass PatchCheck.py without warnings
(EFI_D_ -> DEBUG_ and purging tab characters).
Also update .inf file to current version (and sort entries within
sections).
And update copyright dates to reflect this.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
One of the last remaining modules with a dependency on the deprecated
BdsLib implementation from ArmPkg is the Android fastboot application.
Its only dependency on BdsLib is BdsStartEfiApplication(), which is
used in the most peculiar way: the fastboot app loads the kernel image
into memory, and creates a MemoryMapped() device path for it. It then
proceeds and calls BdsStartEfiApplication(), which explicitly loads the
contents of the devicepath into memory, creating a second in-memory copy
of the kernel image, after which it invokes gBS->LoadImage() with a
buffer address and size (while it is perfectly capable of loading from
a devicepath directly)
Since we know the device path is fully qualified and connected, and does
not require any of the additional processing that BdsStartEfiApplication()
does when dereferencing a device path, we should be able to pass this
devicepath into LoadImage() directly.
So create a simplified local clone of BdsStartEfiApplication(), and drop
the dependency on BdsLib.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
It is to align to the original behavior before "-ec" option was
added.
The patch also refines the code to make it more readable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Jim Dailey <Jim.Dailey@dell.com>
An example:
The codes in function Output8bitPixel in Image.c:
OffsetY = BITMAP_LEN_8_BIT ((UINT32) Image->Width, Ypos);
Both Image->Width and Ypos are of type UINT16. They will be promoted to
int (signed) first, and then perform the multiplication defined by macro
BITMAP_LEN_8_BIT. If the result of multiplication between Image->Width and
Ypos exceeds the range of type int, a potential incorrect results
will be assigned to OffsetY.
This commit adds explicit UINT32 type cast for 'Image->Width' to avoid
possible overflow in the int range. And also fix similar issues in
HiiDatabase.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
When initializing ConsoleOutCheck/ConsoleInCheck/ConsoleErrCheck array in
BMM_FAKE_NV_DATA structure, also need to consider whether the terminal
device is ConOut/ConIn/ConErr or not.
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Update the Conf directory to use the absolute path for build_rule.txt
and tools_def.txt.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BootMenuSelectItem() contains code to DIV BootMenuData->ItemCount.
When BootMenuData->ItemCount can be 0, the DIV operation may
trigger CPU exception.
But in logic, this case won't happen. So add assertion to indicate
it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Correct some minor comment issues in BaseCryptLib.h and
CryptPkcs7Verify.c, including:
- missed "out" in parameter property for ARC4 interfaces;
- Wrong Comment tail in Pkcs7GetAttachedContent function
Cc: Ting Ye <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Current CapsuleApp only supports input/output file from rootdirectory.
If the CapsuleApp and related file are put into subdirectory,
below message will be shown when running the CapsuleApp in shell.
"CapsuleApp: capsule image (Capsule image file name) is not found."
This patch is to add directory support for CapsuleApp
by using shell protocol.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The commit adds check in function InternalPrintGraphic() to ensure that
the expression:
Blt->Width * Blt->Height * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
will not overflow in the UINTN range.
The commit also adds an explicit UINT32 type cast for 'Blt->Width' to
avoid possible overflow in the int range for:
Blt->Width * Blt->Height
Since both Blt->Width and Blt->Height are of type UINT16. They will be
promoted to int (signed) first, and then perform the multiplication
operation. If the result of multiplication between Blt->Width and
Blt->Height exceeds the range of type int, a potential incorrect size will
be passed into function AllocateZeroPool().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The commit adds check in function InternalPrintGraphic() to ensure that
the expression:
Blt->Width * Blt->Height * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
will not overflow in the UINTN range.
The commit also adds an explicit UINT32 type cast for 'Blt->Width' to
avoid possible overflow in the int range for:
Blt->Width * Blt->Height
Since both Blt->Width and Blt->Height are of type UINT16. They will be
promoted to int (signed) first, and then perform the multiplication
operation. If the result of multiplication between Blt->Width and
Blt->Height exceeds the range of type int, a potential incorrect size will
be passed into function AllocateZeroPool().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
For function SplitRecord() in file PropertiesTable.c, there is a
potential subtract underflow case for line:
return TotalNewRecordCount - 1;
However, such case will not happen since the logic in function
SplitTable() ensure that when calling SplitRecord(), the variable
'TotalNewRecordCount' will not be zero when performing the subtraction.
It will be handled in the previous if statement:
if (MaxSplitRecordCount == 0) {
CopyMem (NewRecord, OldRecord, DescriptorSize);
return 0;
}
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In V2, change logic to avoid use mtf[-1] style to get value.
Roll back to previous logic, and use point + offset to get byte value.
Cc: Bell Song <binx.song@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bell Song <binx.song@intel.com>
ARM ArmHvcLib looks like it was created from copy of ArmSmcLib which
looks like it was created from a copy of the AArch64 version.
Both of these files include AsmMacroIoLibV8.h instead of
AsmMacroIoLib.h, although since they only use macros that are identical
between the two, there was no functional issue caused by this.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Remove the library class resolution for ARM's BdsLib: no included
module actually depends on it, and it will be removed shortly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This patch adds an SEV-specific .INF and corresponding assembly
files, to unroll REP INSx/OUTSx on IoRead/WriteFifo#() routines
when the SEV feature is enabled under a hypervisor environment.
The new .INF only supports the IA32 and X64 architectures.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add a new checkpoint to check if the SMM communication parameter has
a correct buffer type.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Add tools_def.txt and build_rule.txt to workspace autogen timestamp file.
Now it will not skip autogen if this two file is updated.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In function AtapiReadCapacity(), the following expression:
IdeDev->BlkIo.Media->LastBlock = (Data.LastLba3 << 24) |
(Data.LastLba2 << 16) |
(Data.LastLba1 << 8) |
Data.LastLba0;
(There is also a similar case in this function.)
will involve undefined behavior in signed left shift operations.
Since Data.LastLbaX is of type UINT8, and
IdeDev->BlkIo.Media->LastBlock is of type UINT64. Therefore,
Data.LastLbaX will be promoted to int (32 bits, signed) first,
and then perform the left shift operation.
According to the C11 spec, Section 6.5.7:
4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
bits are filled with zeros. If E1 has an unsigned type, the value
of the result is E1 * 2^E2 , reduced modulo one more than the
maximum value representable in the result type. If E1 has a signed
type and nonnegative value, and E1 * 2^E2 is representable in the
result type, then that is the resulting value; otherwise, the
behavior is undefined.
So if bit 7 of Data.LastLba3 is 1, (Data.LastLba3 << 24) will be out of
the range within int type. The undefined behavior of the signed left shift
will lead to a potential of setting the high 32 bits of
IdeDev->BlkIo.Media->LastBlock to 1 during the cast from type int to type
UINT64.
This commit will add an explicit UINT32 type cast for Data.LastLba3 to
resolve this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
In function PeiUsbReadCapacity(), the following expression:
LastBlock = (Data.LastLba3 << 24) |
(Data.LastLba2 << 16) |
(Data.LastLba1 << 8) |
Data.LastLba0;
(There is also a similar case in function PeiUsbReadFormattedCapacity().)
will involve undefined behavior in signed left shift operations.
Since Data.LastLbaX is of type UINT8, they will be promoted to int (32
bits, signed) first, and then perform the left shift operation.
According to the C11 spec, Section 6.5.7:
4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
bits are filled with zeros. If E1 has an unsigned type, the value
of the result is E1 * 2^E2 , reduced modulo one more than the
maximum value representable in the result type. If E1 has a signed
type and nonnegative value, and E1 * 2^E2 is representable in the
result type, then that is the resulting value; otherwise, the
behavior is undefined.
So if bit 7 of Data.LastLba3 is 1, (Data.LastLba3 << 24) will be out of
the range within int type. The undefined behavior of the signed left shift
might incur potential issues.
This commit will add an explicit UINT32 type cast for Data.LastLba3 to
refine the codes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
In function UfsBlockIoPeimGetMediaInfo(), the following expression:
Private->Media[DeviceIndex].LastBlock = (Capacity16.LastLba3 << 24) |
(Capacity16.LastLba2 << 16) |
(Capacity16.LastLba1 << 8) |
Capacity16.LastLba0;
(There is also a similar case in this function.)
will involve undefined behavior in signed left shift operations.
Since Capacity16.LastLbaX is of type UINT8, and
Private->Media[DeviceIndex].LastBlock is of type UINT64. Therefore,
Capacity16.LastLbaX will be promoted to int (32 bits, signed) first, and
then perform the left shift operation.
According to the C11 spec, Section 6.5.7:
4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
bits are filled with zeros. If E1 has an unsigned type, the value
of the result is E1 * 2^E2 , reduced modulo one more than the
maximum value representable in the result type. If E1 has a signed
type and nonnegative value, and E1 * 2^E2 is representable in the
result type, then that is the resulting value; otherwise, the
behavior is undefined.
So if bit 7 of Capacity16.LastLba3 is 1, (Capacity16.LastLba3 << 24) will
be out of the range within int type. The undefined behavior of the signed
left shift will lead to a potential of setting the high 32 bits of
Private->Media[DeviceIndex].LastBlock to 1 during the cast from type int
to type UINT64.
This commit will add an explicit UINT32 type cast for Capacity16.LastLba3
to resolve this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
In function ReadCapacity(), the following expression:
MediaInfo->LastBlock = (Data.LastLba3 << 24) |
(Data.LastLba2 << 16) |
(Data.LastLba1 << 8) |
Data.LastLba0;
(There is also a similar case in this function.)
will involve undefined behavior in signed left shift operations.
Since Data.LastLbaX is of type UINT8, and MediaInfo->LastBlock is of type
UINTN. Therefore, Data.LastLbaX will be promoted to int (32 bits, signed)
first, and then perform the left shift operation.
According to the C11 spec, Section 6.5.7:
4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
bits are filled with zeros. If E1 has an unsigned type, the value
of the result is E1 * 2^E2 , reduced modulo one more than the
maximum value representable in the result type. If E1 has a signed
type and nonnegative value, and E1 * 2^E2 is representable in the
result type, then that is the resulting value; otherwise, the
behavior is undefined.
So if bit 7 of Data.LastLba3 is 1, (Data.LastLba3 << 24) will be out of
the range within int type. The undefined behavior of the signed left shift
will lead to a potential of setting the high 32 bits of
MediaInfo->LastBlock to 1 during the cast from type int to type UINT64
for X64 builds.
This commit will add an explicit UINT32 type cast for Data.LastLba3 to
resolve this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
In function GetMediaInfo(), the following expression:
ScsiDiskDevice->BlkIo.Media->LastBlock = (Capacity10->LastLba3 << 24) |
(Capacity10->LastLba2 << 16) |
(Capacity10->LastLba1 << 8) |
Capacity10->LastLba0;
will involve undefined behavior in signed left shift operations.
Since Capacity10->LastLbaX is of type UINT8, and
ScsiDiskDevice->BlkIo.Media->LastBlock is of type UINT64. Therefore,
Capacity10->LastLbaX will be promoted to int (32 bits, signed) first,
and then perform the left shift operation.
According to the C11 spec, Section 6.5.7:
4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
bits are filled with zeros. If E1 has an unsigned type, the value
of the result is E1 * 2^E2 , reduced modulo one more than the
maximum value representable in the result type. If E1 has a signed
type and nonnegative value, and E1 * 2^E2 is representable in the
result type, then that is the resulting value; otherwise, the
behavior is undefined.
So if bit 7 of Capacity10->LastLba3 is 1, (Capacity10->LastLba3 << 24)
will be out of the range within int type. The undefined behavior of the
signed left shift will lead to a potential of setting the high 32 bits
of ScsiDiskDevice->BlkIo.Media->LastBlock to 1 during the cast from type
int to type UINT64.
This commit will add an explicit UINT32 type cast for
Capacity10->LastLba3 to resolve this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This commit makes sure that in function CoreStartImage(), module
variable 'mCurrentImage' is restored to the current start image context
on all code paths.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch updates the PcdPkcs7CertBuffer PCD to use the new
generated test certificate data for PKCS7 verification. This
was used as sample trusted certificate in the verification of
Signed Capsule Update.
(The updated value is still only for test purpose.)
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Long Qin <qin.long@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
The old TestRoot certificate used for Pkcs7Sign is not compliant to
Root CA certificate requirement with incorrect basic constraints and
key usage setting.
When OpenSSL in CryptoPkg was updated from 1.0.2xx to the latest
1.1.0xx, the CA certificate checking was enforced for more extension
validations, which will raise the verification failure when stilling
using the old sample certificates.
This patch re-generated one set of test certificates used in
Pkcs7Sign demo, and updated the corresponding Readme.md to describe
how to set the options in openssl configuration file.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Long Qin <qin.long@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Replace the elaborate but awkward handling of FDT images using device
paths and string PCDs initialized to 128 spaces with a simple scheme
involving a set of builtin DTBs and a bit of runtime logic to select
between them.
This is sufficient for ordinary use, which makes it more suitable as
reference code. Note that overriding the DTB presented to the OS can
easily be done with a UEFI application that simply installs a new DTB
image under the existing FDT configuration table GUID.
For this module, this simply involves removing all code that is involved
in deciding which platform we are running on, and for reasoning about
FDT device paths.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Remove unused cruft from ArmHwDxe -- the only thing that remains is
installation of the 'runaxf' shell command.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
The 32-bit ARM support in this driver is unused, and thus untested.
So let's just remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
The EBL alternative shell depends indirectly on the deprecated ARM
BdsLib via EblCmdLib, which only uses a single helper function that
can easily be cloned. So clone it, and remove the dependency.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In addition to the QXL, Cirrus, etc. VGA adapters, Qemu also implements
a basic version of VMWare's SVGA display device. Drivers for this
device exist for some guest OSes which do not support Qemu's other
display adapters, so supporting it in OVMF is useful in conjunction
with those OSes.
This change adds support for the SVGA device's framebuffer to
QemuVideoDxe's graphics output protocol implementation, based on
VMWare's documentation. The most basic initialisation, framebuffer
layout query, and mode setting operations are implemented.
The device relies on port-based 32-bit I/O, unfortunately on misaligned
addresses. This limits the driver's support to the x86 family of
platforms.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The VMWare SVGA display device implemented by Qemu (-vga vmware) uses
an I/O-type BAR which is laid out such that some register offsets are
not aligned to the read/write width with which they are expected to be
accessed. (The register value port has an offset of 1 and requires
32 bit wide read/write access.)
The EFI_PCI_IO_PROTOCOL's Io.Read/Io.Write functions do not support
such unaligned I/O.
Before a driver for this device can be added to QemuVideoDxe, helper
functions for unaligned I/O are therefore required. This adds the
functions UnalignedIoWrite32 and UnalignedIoRead32, based on IoLib's
IoWrite32 and IoRead32, for the Ia32 and X64 architectures. Port I/O
requires inline assembly, so implementations are provided for the GCC,
ICC, and Microsoft compiler families. Such I/O is not possible on other
architectures, a dummy (ASSERT()ing) implementation is therefore
provided to satisfy the linker.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This adds a header file defining symbolic constants for the VMWare SVGA
virtual display device in preparation for supporting it in
QemuVideoDxe.
It is mostly an extract of the file lib/vmware/svga_reg.h from commit
329dd537456f93a806841ec8a8213aed11395def of VMWare's vmware-svga
repository at git://git.code.sf.net/p/vmware-svga/git (See also
http://vmware-svga.sourceforge.net/ )
Only the bare essentials necessary for initialisation, modesetting and
framebuffer access have been kept from the original file; macro names
have been prefixed with VMWARE_SVGA_ instead of SVGA2_, and the enum
definition has been adapted to comply with EDK2 naming conventions.
The original file was released by VMWare under the MIT license, this
has been retained.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2017-04-07 12:22:30 +02:00
16723 changed files with 592240 additions and 3020862 deletions
1. A supported toolchain (others might work but this is what is tested and validated)
* Windows 10:
* VS 2017 or VS 2019
* Windows SDK (for rc)
* Windows WDK (for capsules)
* Ubuntu 16.04
* GCC5
* Easy to add more but this is the current state
2. Python 3.7.x or newer on path
3. git on path
4. Recommended to setup and activate a python virtual environment
5. Install the requirements `pip install --upgrade pip-requirements.txt`
### Running CI
1. clone your edk2 repo
2. Activate your python virtual environment in cmd window
3. Get code dependencies (done only when submodules change)
*`stuart_setup -c .pytool/CISettings.py TOOL_CHAIN_TAG=<your tag here>`
4. Update other dependencies (done more often)
*`stuart_update -c .pytool/CISettings.py TOOL_CHAIN_TAG=<your tag here>`
5. Run CI build (--help will give you options)
*`stuart_ci_build -c .pytool/CISettings.py TOOL_CHAIN_TAG=<your tag here>`
* -p <pkg1,pkg2,pkg3> : To build only certain packages use a CSV list
* -a <arch1,arch2,arch3>: To run only certain architectures use a CSV list
* -t <target1,target2>: To run only tests related to certain targets use a
CSV list
* By default all tests are opted in. Then given a package.ci.yaml file those
tests can be configured for a package. Finally setting the check to the
value `skip` will skip that plugin. Examples:
*`CompilerPlugin=skip` skip the build test
*`GuidCheck=skip` skip the Guid check
*`SpellCheck=skip` skip the spell checker
* etc
6. Detailed reports and logs per package are captured in the `Build` directory
## Current PyTool Test Capabilities
All CI tests are instances of EDKII Tools plugins. Documentation on the plugin
system can be found [here](https://github.com/tianocore/edk2-pytool-extensions/blob/master/docs/usability/using_plugin_manager.md)
and [here](https://github.com/tianocore/edk2-pytool-extensions/blob/master/docs/features/feature_plugin_manager.md).
Upon invocation, each plugin will be passed the path to the current package
under test and a dictionary containing its targeted configuration, as assembled
from the command line, per-package configuration, and global configuration.
Note: CI plugins are considered unique from build plugins and helper plugins,
even though some CI plugins may execute steps of a build.
In the example, these plugins live alongside the code under test (in the
`.pytool/Plugin` directory), but may be moved to the 'edk2-test' repo if that
location makes more sense for the community.
### Module Inclusion Test - DscCompleteCheck
This test scans all available modules (via INF files) and compares them to the
package-level DSC file for the package each module is contained within. The test
considers it an error if any module does not appear in the `Components` section
of at least one package-level DSC (indicating that it would not be built if the
package were built).
### Code Compilation Test - CompilerPlugin
Once the Module Inclusion Test has verified that all modules would be built if
all package-level DSCs were built, the Code Compilation Test simply runs through
and builds every package-level DSC on every toolchain and for every architecture
that is supported. Any module that fails to build is considered an error.
### GUID Uniqueness Test - GuidCheck
This test works on the collection of all packages rather than an individual
package. It looks at all FILE_GUIDs and GUIDs declared in DEC files and ensures
that they are unique for the codebase. This prevents, for example, accidental
duplication of GUIDs when using an existing INF as a template for a new module.
### Cross-Package Dependency Test - DependencyCheck
This test compares the list of all packages used in INFs files for a given
package against a list of "allowed dependencies" in plugin configuration for
that package. Any module that depends on a disallowed package will cause a test
failure.
### Library Declaration Test - LibraryClassCheck
This test scans at all library header files found in the `Library` folders in
all of the package's declared include directories and ensures that all files
have a matching LibraryClass declaration in the DEC file for the package. Any
missing declarations will cause a failure.
### Invalid Character Test - CharEncodingCheck
This test scans all files in a package to make sure that there are no invalid
Unicode characters that may cause build errors in some character
sets/localizations.
### Spell Checking - cspell
This test runs a spell checker on all files within the package. This is done
using the NodeJs cspell tool. For details check `.pytool/Plugin/SpellCheck`.
For this plugin to run during ci you must install nodejs and cspell and have
both available to the command line when running your CI.
Install
* Install nodejs from https://nodejs.org/en/
* Install cspell
1. Open cmd prompt with access to node and npm
2. Run `npm install -g cspell`
More cspell info: https://github.com/streetsidesoftware/cspell
## PyTool Scopes
Scopes are how the PyTool ext_dep, path_env, and plugins are activated. Meaning
that if an invocable process has a scope active then those ext_dep and path_env
will be active. To allow easy integration of PyTools capabilities there are a
few standard scopes.
| Scope | Invocable | Description |
| :---- | :----- | :---- |
| global | edk2_invocable++ - should be base_abstract_invocable | Running an invocables |
| global-win | edk2_invocable++ | Running on Microsoft Windows |
| global-nix | edk2_invocable++ | Running on Linux based OS |
| edk2-build | | This indicates that an invocable is building EDK2 based UEFI code |
| cibuild | set in .pytool/CISettings.py | Suggested target for edk2 continuous integration builds. Tools used for CiBuilds can use this scope. Example: asl compiler |
## Future investments
* PatchCheck tests as plugins
* MacOS/xcode support
* Clang/LLVM support
* Visual Studio AARCH64 and ARM support
* BaseTools C tools CI/PR and binary release process
File diff suppressed because it is too large
Load Diff
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
