Declare dGPU pins in bootblock instead of ramstage as this conflicts
with the driver init.
Change-Id: I9464be9cbd25809367a112ea007c9e84ad8dfc55
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Fixes speaker detection and/or volume levels after a reboot.
Tested on Pop!_OS 22.04 with Linux 5.17.15.
Change-Id: I55f7e1d8b04233af3062741543a2279b02e167d8
Signed-off-by: Tim Crawford <tcrawford@system76.com>
System powers off on battery power when building the kernel. Reduce PL2
to 90W (2x TDP; same as oryp8) and limit PsysPL2 to 115W.
Change-Id: If5de789a39b2db56b4e3043b2cd7a7f8ad36f8d4
Signed-off-by: Tim Crawford <tcrawford@system76.com>
It is expected all boards using System76 EC firmware will select this
option. Enable it by default and drop the selection from the boards.
Change-Id: Id99d36eaf055a76b9e1eb732174017651de299a5
Signed-off-by: Tim Crawford <tcrawford@system76.com>
WD drives fail to resume from suspend.
Known to affect:
- WD Green SN350
- WD Blue SN550
Change-Id: I319d0a213dc76bf10105fa8e90a2c0e5a0f77f32
Signed-off-by: Tim Crawford <tcrawford@system76.com>
System powers off when booting on battery power from normal operations
such as logging in to GDM.
The EC firmware will update PL4 on AC adapter plug/unplug via PECI.
Change-Id: I6018dd62addf7a5d9302a3e3f6bce7c2d643b5c7
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Fixes system powering off under load when booting on battery.
Change-Id: Id9e74a9e91b3475fcf1b82198571139a43e98779
Signed-off-by: Tim Crawford <tcrawford@system76.com>
lemp11 is ADL-U, not ADL-P. Use the correct ID to override the values
and reduce PL1 to the TDP of 15W.
Change-Id: I285c906dc08d2882e6e84b463a63b69966b3c9f5
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Fix assertions for SATA and I2C1 devices GPIOs.
TODO: Test on darp8.
Change-Id: I89dbd212a7dbd55c84d8ebbb7420b960da8175af
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Change the FSP index for the SATA device to fix detection.
Drop the internal pull-up as there is already an external pull-up.
Change-Id: I5c97b3ee1f6208ca4e454647c8d19d7e7f025047
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Code taken from TGL base.
TEST=Boot MSI PRO Z690-A WIFI DDR4 and see all devices have SSID
applied
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I3a6d299ec40bac8e29d06926572e375d7d835e29
Fixes IRQ errors on oryp8 that cause conflicts with the PCH HDA device.
Change-Id: If0020d9bb6585f7b0fb2dabd3d8b2a3efdd86de2
Signed-off-by: Tim Crawford <tcrawford@system76.com>
BIOS must send the IP_LOAD HECI command to fetch the firmware for CPU
PCIe Gen5 and upload it via CPU REG BAR prior FSP Silicon Init.
Implementation based on Slimbootloader's
"Silicon/AlderlakePkg/Library/CpuPcieHsPhyInitLib" and FSP source.
TEST=Boot MSI PRO Z690-A and see the HSPHY FW is loaded and its recipe
and version is printed.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I6c6c11581e3d3d9bab0131fae6ef487cafe98080
Extend the code to support ADL-S PCIe Root Ports.
Based on DOC #619362 and #619501.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ibb57ad5b11684c0079e384d9a6ba5c10905c1a23
Early EOP prevents disabling CSME.
Disabling CSME now occurs, but checking the result fails:
[DEBUG] HECI: ME state change send success!
[DEBUG] HECI: ME state change result failure!
CSME is disabled on subsequent boots.
Change-Id: I1c1416bb6537774f4bf09820c551b3b4ca7d1a38
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Fixes suspend with certain SSDs installed in the PCIe 4 slot.
Change-Id: Ib91b154963aeafe96c8118cbab89f0e70634e8bc
Signed-off-by: Tim Crawford <tcrawford@system76.com>
The Bonobo has 2 AMPs: one for the speakers and one for the subwoofer.
Smart AMP data was collected using a logic analyzer connected to the IC
during system start on proprietary firmware. This data is then used to
generate a C file [1].
[1]: https://github.com/system76/smart-amp
Change-Id: I5389a9890563ebd3adb20096b6225f474bc006f9
Signed-off-by: Tim Crawford <tcrawford@system76.com>
The addw1 supports an i9-9980HK and the addw2 uses an i7-10875H.
These CPUs have 8 cores and 16 threads. Fixes booting on addw2.
Change-Id: I4639b40c3ab9c6d6ad5abbbb3618c750c7d40695
Fixes: 6a93a45242 ("mb/system76/addw1: Add System76 Adder Workstation 1")
Signed-off-by: Tim Crawford <tcrawford@system76.com>
The option table is shrunk 1 byte to force coreboot to invalid the table
and write the new defaults. This will ensure the IME is in the correct
mode on the next update.
Change-Id: I805c53fee55fea69fa3363fea0609858cc88f2d3
Signed-off-by: Tim Crawford <tcrawford@system76.com>
