The gaze17, like the oryp9, ties all resets for RTD3 to BUF_PLT_RST#
instead of using dedicated lines and ties the enable GPIO to 3.3VS.
Disable RTD3 config for the CPU PCIe RP and disable L23 for the PCH SSD
slot to fix suspend with Western Digital drives.
Change-Id: Iab3796d98ce74e09e74abb48b437e74a60c7b6b1
Signed-off-by: Tim Crawford <tcrawford@system76.com>
The WD drives fail to go from D3cold to D0. Disabling L23 on the PCH port
allows it to work. Disabling L23 on the CPU port causes the CPU to not
reach C10 during suspend, so just remove the entire RTD3 config.
Change-Id: I3bf27fb0fe98e5ec05bff9cc18ab2dd8ac6c66b3
Signed-off-by: Tim Crawford <tcrawford@system76.com>
- Limit PL4 to 72W (1.6x TDP)
- Increase PL2 back to coreboot default value of 115W
- Increase PsysPL2 to 135W
Change-Id: I6d25a92d523d1d73dc6cdea6b630a47a832a54b6
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Declare dGPU pins in bootblock instead of ramstage as this conflicts
with the driver init.
Change-Id: I9464be9cbd25809367a112ea007c9e84ad8dfc55
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Fixes speaker detection and/or volume levels after a reboot.
Tested on Pop!_OS 22.04 with Linux 5.17.15.
Change-Id: I55f7e1d8b04233af3062741543a2279b02e167d8
Signed-off-by: Tim Crawford <tcrawford@system76.com>
System powers off on battery power when building the kernel. Reduce PL2
to 90W (2x TDP; same as oryp8) and limit PsysPL2 to 115W.
Change-Id: If5de789a39b2db56b4e3043b2cd7a7f8ad36f8d4
Signed-off-by: Tim Crawford <tcrawford@system76.com>
It is expected all boards using System76 EC firmware will select this
option. Enable it by default and drop the selection from the boards.
Change-Id: Id99d36eaf055a76b9e1eb732174017651de299a5
Signed-off-by: Tim Crawford <tcrawford@system76.com>
WD drives fail to resume from suspend.
Known to affect:
- WD Green SN350
- WD Blue SN550
Change-Id: I319d0a213dc76bf10105fa8e90a2c0e5a0f77f32
Signed-off-by: Tim Crawford <tcrawford@system76.com>
System powers off when booting on battery power from normal operations
such as logging in to GDM.
The EC firmware will update PL4 on AC adapter plug/unplug via PECI.
Change-Id: I6018dd62addf7a5d9302a3e3f6bce7c2d643b5c7
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Fixes system powering off under load when booting on battery.
Change-Id: Id9e74a9e91b3475fcf1b82198571139a43e98779
Signed-off-by: Tim Crawford <tcrawford@system76.com>
lemp11 is ADL-U, not ADL-P. Use the correct ID to override the values
and reduce PL1 to the TDP of 15W.
Change-Id: I285c906dc08d2882e6e84b463a63b69966b3c9f5
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Fix assertions for SATA and I2C1 devices GPIOs.
TODO: Test on darp8.
Change-Id: I89dbd212a7dbd55c84d8ebbb7420b960da8175af
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Change the FSP index for the SATA device to fix detection.
Drop the internal pull-up as there is already an external pull-up.
Change-Id: I5c97b3ee1f6208ca4e454647c8d19d7e7f025047
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Code taken from TGL base.
TEST=Boot MSI PRO Z690-A WIFI DDR4 and see all devices have SSID
applied
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I3a6d299ec40bac8e29d06926572e375d7d835e29
Fixes IRQ errors on oryp8 that cause conflicts with the PCH HDA device.
Change-Id: If0020d9bb6585f7b0fb2dabd3d8b2a3efdd86de2
Signed-off-by: Tim Crawford <tcrawford@system76.com>
BIOS must send the IP_LOAD HECI command to fetch the firmware for CPU
PCIe Gen5 and upload it via CPU REG BAR prior FSP Silicon Init.
Implementation based on Slimbootloader's
"Silicon/AlderlakePkg/Library/CpuPcieHsPhyInitLib" and FSP source.
TEST=Boot MSI PRO Z690-A and see the HSPHY FW is loaded and its recipe
and version is printed.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I6c6c11581e3d3d9bab0131fae6ef487cafe98080
Extend the code to support ADL-S PCIe Root Ports.
Based on DOC #619362 and #619501.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ibb57ad5b11684c0079e384d9a6ba5c10905c1a23
Early EOP prevents disabling CSME.
Disabling CSME now occurs, but checking the result fails:
[DEBUG] HECI: ME state change send success!
[DEBUG] HECI: ME state change result failure!
CSME is disabled on subsequent boots.
Change-Id: I1c1416bb6537774f4bf09820c551b3b4ca7d1a38
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Fixes suspend with certain SSDs installed in the PCIe 4 slot.
Change-Id: Ib91b154963aeafe96c8118cbab89f0e70634e8bc
Signed-off-by: Tim Crawford <tcrawford@system76.com>
The Bonobo has 2 AMPs: one for the speakers and one for the subwoofer.
Smart AMP data was collected using a logic analyzer connected to the IC
during system start on proprietary firmware. This data is then used to
generate a C file [1].
[1]: https://github.com/system76/smart-amp
Change-Id: I5389a9890563ebd3adb20096b6225f474bc006f9
Signed-off-by: Tim Crawford <tcrawford@system76.com>
The addw1 supports an i9-9980HK and the addw2 uses an i7-10875H.
These CPUs have 8 cores and 16 threads. Fixes booting on addw2.
Change-Id: I4639b40c3ab9c6d6ad5abbbb3618c750c7d40695
Fixes: 6a93a45242 ("mb/system76/addw1: Add System76 Adder Workstation 1")
Signed-off-by: Tim Crawford <tcrawford@system76.com>
The option table is shrunk 1 byte to force coreboot to invalid the table
and write the new defaults. This will ensure the IME is in the correct
mode on the next update.
Change-Id: I805c53fee55fea69fa3363fea0609858cc88f2d3
Signed-off-by: Tim Crawford <tcrawford@system76.com>
