The PCH IOAPIC is not PCI discoverable.
Linux checks the BDF set in DMAR against the PCI class if it is a PIC,
which 00:1F.0 for instance isn't.
The SINIT ACM on the other hand bails out with ERROR CLASS:0xA, MAJOR
3, MINOR 7 if the BUS number is 0.
Change-Id: I9b8d35a66762247fde698e459e30ce4c8a2c7eb0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47538
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Top of Temp RAM is used as bootloader stack, which is the
_car_region_end area. This area is not equal to CAR stack area as
defined in car.ld file.
Use _ecar_stack (end of CAR stack) as starting stack location.
Tested VBOOT, Vendorboot security and no security on Facebook FBG1701.
Change-Id: I16b077f60560de334361b1f0d3758ab1a5cbe895
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47737
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The auxadc (auxiliary analogue-to-digital conversion) is a unit
to identify the plugged peripherals or measure the temperature
or voltages.
The MT8183 auxadc driver can be shared by multiple MediaTek SoCs
so we should move it to the common folder.
Signed-off-by: Po Xu <jg_poxu@mediatek.com>
Change-Id: Id4553e99c3578fa40e28b19a6e010b52650ba41e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
coreboot might not store wifi SAR values in VPD and may store it in
CBFS. Logging the message with 'error' severity may interfere
with automated test tool.
Lowering severity to BIOS_DEBUG avoids this issue.
BUG=b:171931401
BRANCH=None
TEST=Severity of message is reduced and we don't see it as an error
Change-Id: I5c122a57cfe92b27e0291933618ca13d8e1889ba
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47442
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
- enable microcode in cbfs (won't boot without microcode)
- force num fit entry to 1 to avoid crash in cbfstool/fit.c
- re-enable FSP-CAR (tested to boot, while I couldn't boot with NEM)
- enable io driver for uart in legacy mode (ie emulating legacy port by
configuring the pci to legacy io address and hiding the pci device)
Signed-off-by: Julien Viard de Galbert <julien@vdg.name>
Change-Id: Ibc5ce91118c6052af23642fb3461f574cd888dea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47340
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Mariusz Szafrański <mariuszx.szafranski@intel.com>
The IOSAV_By_BW_MASK_ch registers are not per-rank. To preserve original
behavior, use a for-populated-channels loop instead of for-all-channels.
Tested on Asus P8H61-M PRO, still boots.
Change-Id: I6db35c41cd05420ceaeda93255f5ed73598a5bdd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47609
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
After aggressive read training, program nominal Vref for the current
channel, not only channel 0. This simple mistake can easily degrade
memory margins, especially when running at high speed (overclocking).
Tested on Asus P8H61-M PRO, still boots.
Change-Id: I12630fe33c5c786c8ec131c45c27180c3887d354
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47680
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Write training needs to update mode register 1, but `write_mrreg` will
clobber the IOSAV sequence. Reference code uses one four-subsequence to
unset Qoff in MR1, run the test, and finally set Qoff again. This will
be implemented in future changes, and will use the newly-added helper.
Change-Id: I06a06a7bdd43dbde34af4ea2f90e00873eefe599
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47613
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
There's no need to use `struct timA_minmax`, since most cases only care
about the difference between logic delay deltas. The final step does use
the minimum logic delay across all lanes, but it's a special case.
Tested on Asus P8H61-M PRO, still boots.
Change-Id: I1da95520ac915ab003e1a839685cbf5f1970eb6a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47604
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The various platform BARs are not always the same size across different
SOCs, so use the defined size rather than a hardcoded value.
This results in the following change on TGL which increased the MCHBAR
size to 128K:
-system 00:00: [mem 0xfedc0000-0xfeddffff] has been reserved
+system 00:00: [mem 0xfedc0000-0xfedc7fff] has been reserved
And fixes the following error output from the kernel:
resource sanity check: requesting [mem 0xfedc0000-0xfedcdfff],
which spans more than pnp 00:00 [mem 0xfedc0000-0xfedc7fff]
Change-Id: I82796c2fc81dec883f3c69ae7bdcedc7d3f16c64
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47378
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Set the default state of the TCSS PCIe RP0 to hidden so that coreboot
does not allocate resources to this hotplug root port. The default
behavior on the reference design is that there is only one USB4 port
attached to port C1 while port C0 is only a USB3 port.
Meanwhile the Voxel and Terrador variants do have USB4 on both C0 and
C1 ports, so these boards change the default to 'on' so that coreboot
does allocate resources for the hotplug port.
BUG=b:159143739
BRANCH=volteer
TEST=build volteer and voxel and check the resulting static.c to
ensure the device is hidden or not. Also boot with the two different
configurations and ensure resources are assigned or not. Finally
check that S0ix still functions with the C0 port set to 'hidden'
after authorizing a PCIe tunnel on port C1.
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I8bb05ae8cd14412854212b7ed189cfa43d602c1d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47198
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In order to allow override trees to hide/unhide a device copy
the hidden state to the base device. This allows a sequence
of states like:
chipset.cb: mark device 'off' by default
devicetree.cb: mark device 'hidden' (to skip resource allocation)
overridetree.cb: mark device 'on' for device present on a variant
BUG=b:159143739
BRANCH=volteer
TEST=build volteer variants with TCSS RP0 either hidden or on
and check the resulting static.c to see if the hidden bit is
set appropriately.
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: Iebe5f6d2fd93fbcc4329875565c2ebf4823da59b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47197
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There is an issue with the storage device being mis-detected on exit
from S0ix which is causing the root device to disappear if the power
is actually turned off via RTD3.
To work around this read the RX state of the pin and apply the IOSSTATE
setting to drive a 0 or 1 back to the internal controller. This will
ensure the device is detected the same on resume as on initial boot.
BUG=b:171993054
TEST=boot on volteer with PCIe NVMe and SATA SSD installed in the M.2
slot and ensure this pin is configured appropriately. Additionally
test with PCIe RTD3 enabled to ensure suspend/resume works reliably.
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I85542151eebd0ca411e2c70d8267a8498becee78
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47255
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Expose a config option that allows enabling the FSP UPD which controls
Precision Time Measurement for a particular PCIe root port.
This UPD is enabled by default in FSP but interferes with achieving
deeper S0ix substates so in order to prevent it from needing to be
explicitly disabled for every root port this change makes disabling it
the default and allows it to be enabled if needed.
BUG=b:160996445
TEST=boot on volteer with PTM disabled by default for all root ports
and ensure S0i3.2 substate can be achieved.
Change-Id: Icb51b256eb581d942b2d30fcabfae52fa90e48d4
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46856
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable the PCIe RTD3 driver for the PCIe attached SD card interface
and provide the enable/reset GPIOs. These GPIOs are common across
all variants so this is implemented in the baseboard devicetree with
an fw_config probe if the device is present. The RTS5261 device
does not have an enable GPIO so it is disabled in a workaround in
mainboard.c, along with marking the SD-Express device as external.
BUG=b:162289926, b:162289982
TEST=Tested on Delbin platform to ensure the system can enter the
S0i3.2 substate and suspend/resume is stable.
enabling this for the regular Genesys
Change-Id: I40fe05829783c7bce2a2c4c1520a4a7430642e26
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Enable Runtime D3 for the volteer variants that have GPIO power control
of the NVMe device attached to PCIe Root Port 9.
Enable the GPIO for power control for variants that do not already have
it configured to allow the power to be disabled in D3 state.
BUG=b:160996445
TEST=tested on delbin
Change-Id: I6ebf813c6c3364fec2e489a9742f04452be92c45
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46262
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This SOC overrides the common PMC device and instantiates the PMC device
in the SSDT. It needs to call the common PMC function to provide the
IPC mailbox method.
The common PCIe RTD3 driver can also be enabled which will allow
mainboards to enable Runtime D3 power control for PCIe devices.
BUG=b:160996445
TEST=boot on volteer with this driver enabled for the NVMe device in the
devicetree and disassemble the SSDT to ensure the RTD3 code is present.
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: Ifa54ec3b8cebcc2752916cc4f8616fcb6fd2fecc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This driver is for devices attached to a PCIe root port that support
Runtime D3. It creates the necessary PowerResource in the root port to
provide _ON/_OFF methods for which will turn off power and clocks to the
device when it is in the D3cold state.
The mainboard declares the driver in devicetree and provides the GPIOs
that control power/reset for the device attached to the root port and
the SRCCLK pin used for the PMC IPC mailbox to enable/disable the clock.
An additional device property is created for storage devices if it
matches the PCI storage class which is used to indicate that the storage
device should use D3 for power savings.
BUG=b:160996445
TEST=boot on volteer device with this driver enabled in the devicetree
and disassemble the SSDT to ensure this code exists.
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I13e59c996b4f5e4c2657694bda9fad869b64ffde
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46260
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Replace the two obsolete LPID implementations with the new PEPD device.
The PEPD device gets included in the plaforms' `southbridge.asl`, since
it is required to load the `intel_pmc_core` module in Linux, which
checks for the _HID. (See CB:46469 for more info on that.)
There is no harm for mainboards not supporting S0ix, because the _DSM
function won't be called with the LPS0 UUID on such boards. Such boards
can use the debugging functionality of `intel_pmc_core`, too.
Change-Id: Ic8427db33286451618b50ca429d41b604dbb08a5
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46471
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add the _HID INT33A1 to PEPD to make Linux recognize it as "Intel Power
Engine" in the pmc core driver.
The _ADR gets dropped, because _HID and _ADR are mutually exclusive.
Change-Id: I7a0335681f1601f7fd8a9245a3dea72ffd100b55
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46469
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The PEPD enum function returns a bitmask to announce supported/enabled
PEPD functions. Add a comment describing this bitmask and correct the
return value to announce function 1, 5 and 6 as supported.
Also add comments to the disabled functions 3 and 4.
Change-Id: Ib523a54f5ad695e79005aba422282e03f2bc4bed
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47140
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Windows does not comply with the Low Power Idle S0 specification and
crashes with an `INTERNAL_POWER_ERROR` bluescreen when function 1, does
not return at least one device constraint, even when function 1 is
announced as being not available by the enum function. Returning an
empty package does not work.
At least the following Windows versions were verified to be affected:
- Windows 8.1 x64, release 6.3.9600
- Windoes 10 x64, version 1809, build 17763.379
- Windows 10 x64, version 1903, build 18362.53
- Windows 10 x64, version 2004, build 19041.508
- Windows 10 x64, version 20H2 / 2009, build 19042.450
To make Windows work on S0ix-enabled boards, return a dummy constraint
package with a disabled dummy device.
Since the device constraints are only used for debugging low power
states in Linux and probably also in Windows, there shouldn't be any
negative effect to S0ix. Real device constraint entries could be added
at a later point, if needed.
Note: to fully prevent the BSOD mentioned above the LPIT table is
required on Windows, too. The patch for this is WIP, see CB:32350.
If you want to test this, you need to applie the whole ACPI patch
series including the hacky LPIT test implementation from CB:47242:
https://review.coreboot.org/q/topic:%22low_power_idle_fix%22
Test: no bluescreen anymore on Clevo L140CU on all Windows versions
listed above and S0ix gets detected in `powercfg -a`.
Change-Id: Icd08cbcb1dfcb8cbb23f4f4c902bf8c367c8e3ac
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47138
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
`ARG2` in the macro's names does not really provide any useful
information. Drop it and add `LPI` to clarify the relation to only
low-power idle states.
Change-Id: I8d44c9e4974c7f34aa5c32ba00328725f536fda6
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47247
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Rename LPID to PEPD for consistency. PEPD means "Power Engine Plug-In
Device" and is the name Intel and vendors usually use, so let's comply.
Change-Id: I1caa009a3946b1c55da8afbae058cafe98940c6d
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46470
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move the UUID to the condition, since there is no need to assign a name
when it is only used once. Also add a comment to make clear that the
functions inside that condition are only used by the Low Power Idle S0
functionality, while the PEPD in general can be present on boards
without S0ix capability, too. For details check CB:46469.
Change-Id: Ic62c37090ad1b747f9d7d204363cc58f96ef67ef
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46468
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reference code never enables SRT for Sandy Bridge, and only enables it
for Ivy Bridge when the memory frequency is at most 1066 MHz.
Tested on Asus P8H61-M PRO, still boots.
Change-Id: I50527f311340584cf8290de2114ec2694cca3a83
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This register must be programmed if Self-Refresh Temperature range is
enabled in MR2 (bit 7). Because the memory controller needs to reprogram
MR2 when entering Self-Refresh, it needs a copy of the MR2 settings. It
also needs to know about mirrored ranks to correctly issue MRS commands.
Tested on Asus P8H61-M PRO, still boots.
Change-Id: I2e459ac7907ead75826c7d2ded42328286eb9377
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Instead of programming subsequences one-by-one, we might as well take
the whole sequence as an array and program all subsequences in one go.
Since the number of subsequences is now known in advance, handling of
global state can be simplified, which allows reusing the last sequence.
Change-Id: Ica1b2b20e04ae368f10aa236ca24d12f69464430
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47492
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The headers added are generated as per FSP v2385_02.
Previous FSP version was 2376.
Changes Include:
- add VtdIopEnable, VtdIgdEnable, and VtdIpuEnable UPDs in Fspm.h
TEST=Build and boot JSLRVP
Change-Id: I268eca1bcbbf26d4dc4ecf54d432cdb6ad49b4eb
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47500
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The current HID "RX6110SA" does not comply with the ACPI spec in terms
of the naming convention where the first three caracters should be a
vendor ID and the last 4 characters should be a device ID. For now
there is a vendor ID for Epson (SEC) but there is none for this
particular RTC. In order to avoid the reporting of a non ACPI-compliant
HID it will be dropped completely for now.
Once Epson has assigned a valid HID for this RTC, this valid HID will be
used here instead.
Change-Id: Ib77ffad084c25f60f79ec7d503f14731b1ebe9e2
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47706
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
By renaming the AMD SOC common Kconfig file the wildcard to source all
AMD SoC-specific Kconfig files won't match to it and it can be sourced
after all SoC-specific Kconfig files in the sub-directories are sourced.
This change allows adding new SoCs without having to edit the soc/amd
Kconfig file.
Change-Id: Iaaa5aad23eb6364d46b279101f3969db9f182607
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The code that uses the GPU device ID uses the correct ATI vendor ID, but
the description wrongly used AMD as vendor. In the AMD APUs the GPU PCI
device and the corresponding audio controller use the ATI PCI vendor ID
while all other PCI devices in the SoC use the AMD PCI vendor ID.
Also move the two entries in a separate section right below the one they
were in.
Change-Id: Ia0b5bd4638f5b07c487f223321872563b36337e9
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
SD Card driver needs to access two regulators - MT6360_LDO5 and
MT6360_LDO3. These two regulators are disabled by default.
Two APIs are implemented:
- mainboard_enable_regulator: Configure the regulator as enabled/disabled.
- mainboard_regulator_is_enabled: Query if the regulator is enabled.
BUG=b:168863056,b:147789962
BRANCH=none
TEST=emerge-asurada coreboot
Change-Id: I391f908fcb33ffdcccc53063644482eabc863ac4
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46687
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
google_chromeec_regulator_enable is for enabling/disabling
the regulator. google_chromeec_regulator_is_enabled is for
querying if the regulator is enabled.
BUG=b:168863056,b:147789962
BRANCH=none
TEST=emerge-asurada coreboot
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Change-Id: Ia804242042b0026af19025a0c4a74b3ab8475dab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46686
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Currently, five regulator controls are implemented for DRAM
calibration and DVFS feature.
The regulators for VCORE and VM18 are controlled by MT6359.
The reguatlors for VDD1, VDD2 and VMDDR are controlled by MT6360
via EC.
BUG=b:147789962
BRANCH=none
TEST=verified with DRAM driver
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Change-Id: Id06a8196ca4badc51b06759afb07b5664278d13b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
This function is no longer required to be implemented since
EC/AUXFW sync was decoupled from vboot UI. (See CL:2087016.)
BUG=b:172343019
TEST=Compile locally
BRANCH=none
Signed-off-by: Joel Kitching <kitching@google.com>
Change-Id: I43e8160a4766a38c4fa14bcf4495fc719fbcd6c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
The current CSE firmware update implementation adds CSE RW binary to
FW_MAIN_A/B and this increases the boot time due to the size increase
of these regions leading to higher loading and hashing time.
To mitigate this issue, CSE RW binary is moved from FW_MAIN_A/B to new
region, ME_RW_A/B under RW_SECTON_A/B, and this updates the flashmap to
add ME_RW_A/B region for CSE RW binary.
BUG=b:169077783
TEST=build with cse rw binary, flash and verify volteer2 boots to OS.
Verify me_rw binary is added to ME_RW_A/B region.
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Change-Id: I87da3824933ed2dd8e8ed0fed8686d2a3527faea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46431
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
CSE RW blob which will be used by coreboot to update CSE's RW partition,
is packed part of FW_MAIN_A and FW_MAIN_B. This will increase the size of
FW_MAIN_A and FW_MAIN_B. So, accordingly load and hash calculation of
FW_MAIN_A (or FW_MAIN_B) increases during verstage. It increases the boot
time by around 300ms.
The patch address the boot time by pulling CSE RW blob outside of
FW_MAIN_A and FW_MAIN_B. So, it creates new FMAP region within
RW_SECTION_A and RW_SECTION_B and adds CSE RW blob in the new regions
(ME_RW_A and ME_RW_B) as a CBFS file.
Boot Time Measurement details when CSE RW blob is added in the
ME_RW_A and ME_RW_B.
--------------------------------------------------------
| Platform | Old Boot Time | New Boot Time |
--------------------------------------------------------
| JSL | 1.3s | 1.06s |
--------------------------------------------------------
| TGL | 1.63s | 1.36s |
--------------------------------------------------------
Changes:
1. Makefile change to accommodate CSE RW blob into ME_RW_A/ME_RW_B
2. Kconfig change to define CBFS name and default file name for RW blob
metadata.
3. CSE Lite Driver
BUG=b:169077783
TEST=Verified on JSL & TGL platforms
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: If043c9cb99fb822b62633591bf9c5bd75dfe8349
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46312
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
This patch modifies flash layout to add ME_RW_A/B to add
the CSE RW blob and also enable the CSE RW update feature for
JSLRVP
BUG=b:169077783
TEST= Built for jslrvp. Verified that CSE RW and metadata files
are included in cbfs.
Change-Id: I13baa317a06d00cec0337f08754892c7c8737f5d
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47557
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Existing implementation adds the CSE RW update binary to FW_MAIN_A/B
regions and this has significant impact on boot time due to the
increase in the size of these regions leading to higher loading
and hashing time.
This patch modifies flash layout to add new ME_RW_A/B fmap regions
in the RW_SECTION_A/B.
BUG=b:169077783
TEST= Built for dedede. Verified that CSE RW binary is added to the
CSE_RW_A/B fmap region.
Change-Id: I23a3e22a569488b39beb4d12f5b6309c7c742992
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47439
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
In the existing implementation CSE RW metadata file is generated by
scripts and to avoid incompitable issues between coreboot and the
scripts this patch adds the follwing changes,
* Move the metadata generation to the coreboot Makefile.
* Add CBFS component type struct to create a metadata file during
the compile time.
* Extract the CSE RW version from SOC_INTEL_CSE_RW_VERSION config
and update the major, minor, hotfix and build versions using the
compile time flags.
* Compute the hash of CSE RW binary in hex format using the openssl
and use the HASH_BYTEARRAY macro to convert the 64 character hex
values into the array.
* Add the me_rw.metadata cbfs file to FW_MAIN_A and FW_MAIN_B
regions.
BUG=b:169077783
TEST= Built for dedede. Verify that metadata file was generated
and added to the FW_MAIN_A/B. Extracted it using cbfstool and
verfied that metadata was generated properly.
Change-Id: I412581400a9606fa17cf4398faffda923f07b320
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47431
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Add the Kconfig to enable the CSE FW Update feature and also to
ensure all the configs are set by the mainboards to enable this
feature.
This config by default disables the CSE FW update feature for JSL
and TGL platforms. It will be enabled after splitting and including
the CSE RW and CSE RW metadata blobs in the CBFS.
BUG=b:169077783
Change-Id: I12810031224f79aba8a4057725ae0ed5a9b36d7e
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47523
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
This patch adds a kconfig SOC_INTEL_CSE_RW_VERSION to pass the
CSE RW firmware version from the mainboard. This will be extracted
by makefile to update the cse_rw_metadata structure.
Right now the required tool to extract the CSE RW version from
the blob is still under development and after the official version
of the tool is released, version will be extracted by parsing the
CSE RW blob.
BUG=b:169077783
Cq-Depend: chrome-internal:3402224, chrome-internal:3397863,
chromium:2473603, chromium:2473603, chromium:2535950
Change-Id: I62691ee3ede7d4cd21f821381f5d1519f9061fd9
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47430
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SKX FSP doesn't support X2APIC setup, but CPX does. The CPX DMAR
table needs the X2APIC opt out flag set. This fixes the hang loading
a kexec'd kernel. The change is easy to see in the coreboot output:
[DMA Remapping table] Flags: 0x3
or in the DMAR ACPI table.
Change-Id: Iec977c893b70e30875d9a92f24af009c1e90389e
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47579
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
When the system shuts down, turn the fingerprint sensor off. This sets
the GPIOs correctly for the next boot. The fingerprint sensor was
previously left on, and was just powering down when the rails went low.
On suspend, the fingerprint sensor stays awake and puts itself in a low
powerstate mode based on the SLP_Sx_L pin states.
BUG=b:171837716
TEST=Fingerprint sensor still works after S3, GPIO state on the boot
following a shutdown is low.
BRANCH=Zork
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I3837b58372d8f4a504535e76bd21c667d68f8995
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47311
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
At this point, the zork platform will only use psp_verstage, so remove
the VBOOT_STARTS_IN_BOOTBLOCK option and set code for VBOOT_STARTS-
BEFORE_BOOTBLOCK to always be used.
TEST=Build & Boot Morphius
BRANCH=Zork
BUG=b:172848137
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I30d90fe82c37966a860b52c07a3550dcecf8d19d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47529
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This change drops the inclusion of entry16.ld and reset16.ld and
instead adds the content of those files directly in memlayout_x86.ld
in amd/picasso. This is done to allow the work for top-aligning
bootblock to happen independent of Picasso layout. Once that is
complete, Picasso layout can be re-evaluated to see if it can make use
of the common bootblock linker file includes.
TEST=Verified that coreboot.rom generated using --timeless is the same
with and without this change for trembyle.
Change-Id: Ib1218b24a06d0f69b856fb21458a6183fd21fcbc
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43281
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
In the file uintptr_t that is defined in stdint.h and struct device that
is defined in device/device.h are used, so include them directly to
avoid having to rely on them being included in the file that includes
this header file.
Change-Id: I9893619924d45e5690a5cfc65252ace4cb7f1486
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47627
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Add a NULL check and only skip setting the default operations
if `.ops` was set by a driver. It's fairly unlikely that some-
body adds a driver and forgets the `.ops` pointer. So this is
mostly to increase readability: Nobody should have to wonder
if we're missing a NULL-check.
The condition is moved out of the loop to reduce indentation
levels. Alternatively, we could jusk skip drivers that don't
have `.ops` set (i.e. continue the loop).
Change-Id: I5dcc05ebb092fb9c4be929c81ea2b05a10b1311b
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46297
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Devices of class type "system" are arbitrary devices and it's not clear
which of them need bus mastering. Therefore, enable bus mastering
conditionally based on Kconfig option PCI_ALLOW_BUS_MASTER_ANY_DEVICE.
Change-Id: Ia04e83606a0a081c0758ec59e52627aa1dbd2622
Signed-off-by: Felix Singer <felix.singer@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45151
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
If the stub size would be larger than the save state size, the stagger
points would overlap with the stub.
The check is placed in the stub placement code. The stub placement
code is called twice. Once for the initial SMM relocatation and for
the permanent handler in TSEG. So the check is done twice, which is
not really needed.
Change-Id: I253e1a7112cd8f7496cb1a826311f4dd5ccfc73a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47069
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The only reason to write the MR values to the training result registers
is for EV (Electrical Validation) usage. The hardware doesn't need it.
Tested on Asus P8H61-M PRO, still boots.
Change-Id: I808174494729453f4ebcaa13258d735faae68d72
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47486
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
It is usually written to right after programming a pattern, because its
lower byte contains the number of cachelines of the programmed pattern.
The other cases merely reset the WDB data write and compare pointers.
Change-Id: I97196d404bf70542db28499e0d2e24b7cdab07b6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47484
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
The current timeout of 500ms is too low. For instance self-test
of the KBC integrated into IT8516E took almost 1s in tests. We
already check for presence of the KBC before the self-test. So
the timeout should only trigger on a hardware defect and we can
leave some margin.
Change-Id: I95f01a4e605a9c7deb894a71e102c3a881759bb1
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Create the lantis variant of the waddledee reference board by
copying the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.2.0).
BUG=b:171546871
BRANCH=dedede
TEST=util/abuild/abuild -p none -t google/dedede -x -a
make sure the build includes GOOGLE_LANTIS
Change-Id: Ie3d15a687b870afc7d8bbeb6b5cab0792650da31
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Add a function that initializes GPIOs based on the sleep type that
the system is coming back from. This allows initialization of the
fingerprint GPIOs which need to be handled differently between wake
from S3 and boot from S5.
On initial boot, the state of the FP sensor could be either
enabled or disabled. Because of this, on boot, we power off
the sensor for >200ms, to reset its state, then power it back on.
In suspend/resume, the fingerprint sensor should remain powered
the entire time.
If fingerprint is disabled on the trembyle-based board, set the pins
to no-connect. Dalboz doesn't have fingerprint and the GPIOS are
configured differently due to the FT5 chip having fewer GPIOS than
FP5, so nothing needs to be initialized there.
There were also a couple of trivial comment clean ups regarding the
FPMCU GPIOS.
BUG=b:171837716
TEST=Boot & Check GPIO states.
BRANCH=Zork
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I16a2e621145782e0a908bb3e49478586c09a0e0a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47308
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This change adds memory parts used by variant voema to
mem_parts_used.txt and generates DRAM IDs allocated to these parts.
Added memory
1. H9HCNNNCRMBLPR-NEE
2. H9HCNNNFBMBLPR-NEE
3. MT53D1G64D4NW-046 WT:A
BUG=b:172751925,b:172781673,b:172782100,b:172781562
TEST=emerge-volteer coreboot chromeos-bootimage
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ic832155448fb07152b906aa04ca49d384ec47b34
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47351
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds the following memory parts to LP4x global list of
available LP4x parts and to the global JSON file containing LP4x parts
and their characteristics.
1. H9HCNNNCRMBLPR-NEE
2. H9HCNNNFBMBLPR-NEE
3. MT53D1G64D4NW-046 WT:A
BUG=b:172751925,b:172781673,b:172782100,b:172781562
TEST=cd <path_to_coreboot_src>/util/spd_tools/lp4x &&
./gen_spd <path_to_coreboot_src>/src/soc/intel/tigerlake/spd \
global_lp4x_mem_parts.json.txt "TGL"
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I37702770f707fe078920694468552c5db59c478f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47350
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When the host sends data in i2c bus, device might not send ACK. It means
that data is not processed on the device side, but for now we don't
check for that condition thus wait for the response which will not come.
Designware i2c detect such situation and set TX_ABORT bit. Checking for
the bit will enable other layers to immediately retry rather than
wait-timeout-retry cycle.
BUG=b:168838505
BRANCH=zork
TEST=test on zork devices, now we see "Tx abort detected" instead of I2C
timeout for tpm initializtion.
Change-Id: Ib0163fbce55ccc99f677dbb096f67a58d2ef2bda
Signed-off-by: Kangheui Won <khwon@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47360
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The T3 that PPVARN_LCD low to LCM_RST_1V8 high is 0.1269ms and
it does not meet the LCD specification that the T3 must be larger
than 5ms. Because there is a delay between PPVARN_LCD_EN and
PPVARN_LCD. An extra 9ms delay should be added on LCM_RST_1V8
in order to meet the specification "ProductSpec_NV105WUM-A51_
V4.3_P2(TLCM).pdf".
BUG=b:172201138
BRANCH=kukui
TEST=The LCD sequence T3 is larger than 5ms when power on.
Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com>
Change-Id: Iaf7ae494e30c4c207103d949287b335288688c54
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47443
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
The SMU mailbox access code from Picasso can be reused in the next
generation, so factor out the code to soc/amd/common/block/smu. Since
the mailbox register offsets in the indirect address space, the number
of arguments and the message IDs don't always match between different
devices, keep those in the soc-specific directories.
Change-Id: Ibaf5b91ab35428e4c771e7163c6e0c4fc50371e7
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47483
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Copy the code for CPPC entries generation, needed for Intel SpeedShift,
from SKL to common ACPI code.
SKL is going to use common ACPI code, too, in the future, so this code
duplication will vanish soon.
Test: dumped SSDT from Clevo L140CU and checked decompiled version after
enabling CPPC entries via Kconfig
Change-Id: I1fcc2d0d7c6b6f35f8dd011f55dab8469be99d47
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45535
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently the decision of whether or not to use mrc_cache in recovery
mode is made within the individual platforms' drivers (ie: fsp2.0,
fsp1.1, etc.). As this is not platform specific, but uses common
vboot infrastructure, the code can be unified and moved into
mrc_cache. The conditions are as follows:
1. If HAS_RECOVERY_MRC_CACHE, use mrc_cache data (unless retrain
switch is true)
2. If !HAS_RECOVERY_MRC_CACHE && VBOOT_STARTS_IN_BOOTBLOCK, this
means that memory training will occur after verified boot,
meaning that mrc_cache will be filled with data from executing
RW code. So in this case, we never want to use the training
data in the mrc_cache for recovery mode.
3. If !HAS_RECOVERY_MRC_CACHE && VBOOT_STARTS_IN_ROMSTAGE, this
means that memory training happens before verfied boot, meaning
that the mrc_cache data is generated by RO code, so it is safe
to use for a recovery boot.
4. Any platform that does not use vboot should be unaffected.
Additionally, we have removed the
MRC_CLEAR_NORMAL_CACHE_ON_RECOVERY_RETRAIN config because the
mrc_cache driver takes care of invalidating the mrc_cache data for
normal mode. If the platform:
1. !HAS_RECOVERY_MRC_CACHE, always invalidate mrc_cache data
2. HAS_RECOVERY_MRC_CACHE, only invalidate if retrain switch is set
BUG=b:150502246
BRANCH=None
TEST=1. run dut-control power_state:rec_force_mrc twice on lazor
ensure that memory retraining happens both times
run dut-control power_state:rec twice on lazor
ensure that memory retraining happens only first time
2. remove HAS_RECOVERY_MRC_CACHE from lazor Kconfig
boot twice to ensure caching of memory training occurred
on each boot.
Change-Id: I3875a7b4a4ba3c1aa8a3c1507b3993036a7155fc
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46855
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update I2C address for Goodix touchscreen and add ELAN touchscreen &
Synaptics trackpad device. Follow CB:47415 to correct HID over I2C
device to be level triggerd.
BUG=b:160013582
TEST=emerge-volteer coreboot and check system dmesg and evtest can get
device.
Change-Id: I070fb0e06b588f128253270502c9c2c427c62b84
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The option `HeciEnabled` was partly replaced by use of the device on/off
state in the devicetree in commit 3de90d1. The option has been removed
from the corresponding boards, so `HeciEnabled` is always 0 and ME
always gets disabled during soc finalize, when `HECI_DISABLE_USING_SMM`
is set.
Replace the option in the finalize function by the same dt state check
that sets the FSP option and drop the remaints of `HeciEnabled`.
Devicetrees still having `HeciEnabled` have been adapted to keep the
current behaviour.
Change-Id: Ib4cca9099b9aa3434552a41fbafca7cf6a0dd0eb
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47195
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In order for USB Type-C idisplays to be detected prior to loading Kernel
PMC IPC driver is needed to communicate with PMC in order to correctly set
the USB Mux settings. This patch is adding in support for early detection
of both Displays.
BUG=b:151731851
BRANCH=NONE
TEST=built and verified that TCSS MUX is being set on Volteer
Change-Id: I58e66f21210d565fb8145d140d2fc7febecdd21a
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42079
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To align MADT generation with DMAR, we loop over HOB entries instead
of over copied HOB entries fetched from get_iio_stacks(). This makes
it easier to see what is going on.
Tested on ocp/deltalake
Change-Id: I8ffe0322bb182b7ec5887354ec801e1f9f3d3288
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47300
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
All this function does is looping over IIO stacks in the FSP HOB. The
only 'SOC/FSP specific' thing is the way to detect if the stack is an
IIO stack so add a callback to determine this.
Change-Id: I4fa9c54d50279213a4174186a23c3cc156e21c9a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47522
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
The somewhat unrelated return value makes the function harder to
understand and the return type is not consistently used. Use a
different helper function to get the HOB Pci64BitResourceAllocation
data.
Change-Id: I9a03cbb0ebbb48cc052d4c082d359c0087aaeb3e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47298
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Select `PM_ACPI_TIMER_OPTIONAL` to enable the new PM ACPI Kconfig and
set the FSP option for PM ACPI timer enablement from its value instead
of using the old devicetree option.
Also drop the obsolete devicetree option from soc code and from the
mainboards and add a corresponding Kconfig entry instead.
Change-Id: I10724ccf1647594404cec15c2349ab05b6c9714f
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45955
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
FSP already disables the PM ACPI timer, when EnableTcoTimer=0.
Test: clevo/l140cu and supermicro/x11ssm-f have the PM ACPI timer
disable bit set when EnableTcoTimer=0.
Change-Id: If370d3acf87ae6d1d7c64bf27228877cdd92ab2d
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45954
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Currently, the ACPI PM timer state gets set in devicetree by the option
PmTimerDisabled. However, it is not board design dependent. Thus, add a
user-selectable Kconfig option.
Disabling the PM ACPI Timer is only valid when PM Timer emulation is
supported and is only possible, when there is a hardware PM Timer (APL
does not have one for example). SoCs, where the hardware PM Timer can be
disabled must select `PM_ACPI_TIMER_OPTIONAL`.
This new Kconfig gets used in the follow-up commits of this series.
Change-Id: I7f607f277eb14f84a7370ffb25a13226e7ccc917
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45952
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
There's no need to perform manual shifting and masking when ACPI allows
one to painlessly describe bitfields of a register. The now-unused DVEN
definition will be dropped in a follow-up, alongside other definitions.
Change-Id: Iab6972c78c1114c8e3dfee28320ae233421ff154
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46787
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Commit 576b7c7 (broadwell: gpio.asl: Make GWAK method serialized) made
GWAK serialized for Broadwell. This commit follows suit on Lynx Point.
The reason to serialize this method is because it creates named objects
which depend on input parameters, and thus cannot be created elsewhere.
Change-Id: I892700df3bba079e3280008f619017e3954d5a06
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46783
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
LynxPoint-LP handles GPIOs differently, and LynxPoint-H has the same
GPIO kind as previous-generation PCHs, such as Cougar Point. Remove some
unneeded logic from `_CRS` and declare the GPIOBASE resource statically.
The preprocessor allows later ACPI deduplication to remain reproducible.
Change-Id: If771d5b6c3a1623da7d015ed50199877615409b2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46781
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use ASL 2.0 syntax where possible and uniformize code style to match the
IASL disassembly. Some `Store` in gpio.asl change the binary if touched.
Tested with BUILD_TIMELESS=1, Google Buddy does not change.
Change-Id: Ic13c081fd7ee2212d851cc14263c1e2fd8970072
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46778
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use ASL 2.0 syntax where possible and uniformize code style to match the
IASL disassembly. Some `Store` in gpio.asl change the binary if touched.
Also remove outdated comment and remove `LynxPoint` from `serialio.asl`.
Tested with BUILD_TIMELESS=1, Google Panther does not change.
Change-Id: Ie0994fa546ff54ebb533afcc6205efb36da99a67
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46777
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The trailing slash is required to make gerrit add me on changes for the
whole tree, not just for the directory itself, which obviously would
only change if being deleted or renamed.
This also fixes the behaviour for Felix Singer.
Change-Id: I601aebd4335c7326deca0118725a6f25cec524a9
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
This patch adds basic ACPI support for the RTC so that the OS is able to
use this RTC via the ACPI interface.
If the Linux kernel is able to find the RTC in ACPI scope, you should
see the following lines in dmesg, where [n] is an enumerated number:
rx6110 i2c-RX6110SA:00: rtc core: registered RX6110SA:00 as rtc[n]
rtc rtc[n]: Update timer was detected
Change-Id: I9b319e3088e6511592075b055f8fa3e2aedaa209
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47235
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Selecting USE_CAR_NEM_ENHANCED_V1 as of now. This selection in Kconfig
programs IA32_L3_MASK_1 (0xc91) & IA32_L3_MASK_2 (0xc92). These will
select ways for eviction & non-eviction. TGL will have to switch back
to USE_CAR_NEM_ENHANCED_V2 once the IA32_L3_SF_MASK_1 (0x1891) &
IA32_L3_SF_MASK_2 (0x1892) programming requirements are understood.
Bug=b:171601324
BRANCH=volteer
Test=Build coreboot for volteer. Boot on SKU that has 4MB L3 cache.
Change-Id: Ifc77856e26ab26f9fbb2693f70c751f43337421b
Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47258
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This change switches the selection of CAR mode so that
INTEL_CAR_NEM_ENHANCED_V2 is the default unless mainboard
selects INTEL_CAR_NEM. INTEL_CAR_NEM is selected only by
mainboards using older silicon (ES1 or ES2) that did not
support NEM enhanced mode.
This enables NEM Enhanced Mode for TGL-U/Y RVPs.
Bug=b:171601324
BRANCH=volteer
Test=Build coreboot for volteer. Boot on SKU that has 4MB L3 cache.
Change-Id: Ib6e041261cb8ca9c6e602935da4962aac0d9ece5
Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47259
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Due to the phony dependency to check for openssl, vboot-futility
was always rebuilt, and because it was newer than coreboot-futility,
it was always copied over.
Do that in parallel often enough and you run into race conditions,
as we did on our builders. Mark check-openssl-presence as order-only
dependency so that it's executed (and can bail out) but doesn't force
regeneration of vboot-futility.
Change-Id: Ib7fb798096d423d6b6cba5d199e12fe5917c3b41
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47453
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add the missing special function gpio pad groups for CNL-LP.
The groups and names are documented in the PCH EDS, in Linux
(linux/drivers/pinctrl/intel/pinctrl-cannonlake.c) and other places.
Also, see soc/intel/tigerlake for reference.
Change-Id: I0509552da6ffad395c2b89df1676e1903c783695
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45201
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add the missing special function gpio pad groups for CNL-H.
The groups and names are documented in the PCH EDS, in Linux
(linux/drivers/pinctrl/intel/pinctrl-cannonlake.c) and other places.
Also, see soc/intel/tigerlake for reference.
Change-Id: Ib83aeef9f4b6aa174e61ccbd87fb7b6450ed773b
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45204
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The names of the GPIO_RSVD_* are documented in the PCH EDS, in Linux
(linux/drivers/pinctrl/intel/pinctrl-cannonlake.c) and other places.
Also, see soc/intel/tigerlake for reference.
Change-Id: Ifd6cabb646000c8dff695c5c4f7196b2779f1430
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45202
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The names of the GPIO_RSVD_* are documented in the PCH EDS, in Linux
(linux/drivers/pinctrl/intel/pinctrl-cannonlake.c) and other places.
Also, see soc/intel/tigerlake for reference.
Change-Id: I86c7159d9f48560c41efdfe49f162aef00499d13
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45200
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The Asus F2A85-M, F2A85-M LE and F2A85-M PRO all have a Super I/O, and
therefore have legacy devices like a serial console.
Selecting `HUDSON_LEGACY_FREE` currently disable the serial console
during bootup in romstage, which is undesired.
So, deselect the symbol by default.
TEST=Boot Asus F2A85-M PRO and verify serial console is *not* disabled
during romstage.
Change-Id: Ia6588c0d4b2c24c7cb9da04805d13274c8ae295e
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47363
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add support to check for the Power Management (PM) Status bit for
various internal devices like USB, CNVi etc. and log them into the event
log for debugging purposes.
BUG=b:172279037
BRANCH=volteer
Change-Id: Ib3d0bf33d780444f8240f749a3319212c985950d
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47227
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add support to check for the Power Management (PM) Status bit for
various internal devices like USB, CNVi etc. and log them into the event
log for debugging purposes.
BUG=b:172279037
TEST=Build and boot to OS in Drawlat. Ensure that the wake up event is
logged into the event log for one of the internal devices eg. USB
bluetooth.
8 | 2020-11-05 15:04:16 | S0ix Enter
9 | 2020-11-05 15:04:29 | S0ix Exit
10 | 2020-11-05 15:04:29 | Wake Source | PME - XHCI (USB 2.0 port) | 8
11 | 2020-11-05 15:04:29 | Wake Source | GPE # | 109
12 | 2020-11-05 15:05:08 | S0ix Enter
13 | 2020-11-05 15:05:14 | S0ix Exit
14 | 2020-11-05 15:05:14 | Wake Source | PME - XHCI (USB 2.0 port) | 8
15 | 2020-11-05 15:05:14 | Wake Source | GPE # | 109
Change-Id: I9f43675b698bf310f6b98b5e775d1259607abbcd
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47226
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The code is based on autoport, with necessary modifications.
This laptop uses SMSC MEC1322 embedded controller, but the EC
interface is the same as the EliteBook laptops of previous generations
that use KBC1126 EC. So it still uses ec/hp/kbc1126, but does not need
EC firmware inserted into CBFS. We also need to leave the end of the
OEM flash content untouched, so the default ROM size is set to 12MiB
instead of 16MiB, and we need to modify the IFD when flashing.
Thanks to persmule for providing the laptop and pointing out how to
program the system flash chip of it.
Change-Id: I2328c43cbb1f488aa1d0ddd9116814d971e5d8ae
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
CB:46865 ("mb, soc/intel: Reorganize CNVi device entries in
devicetree") reorganized the devicetree entries to make the
representation of CNVi device consistent with other internal PCI
devices. Since a dummy generic device is added for the CNVi device,
`emit_sar_acpi_structures()` needs to first check if the device is PCI
before checking the vendor ID. This ensures that SAR table generation
is skipped only for PCIe devices with non-Intel vendor IDs and not for
the dummy generic device.
BUG=b:165105210
Change-Id: I3c8d18538b94ed1072cfcc108552f3a1ac320395
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47364
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Calculate the frequencies based on the appropriate MSRs and pass them to
SMBIOS tables generator. Ivybridge microarchitecture does not yet
implement CPUID 16H leaf used to obtain the required frequencies.
TEST=Intel Core i7-3770, TianoCore UEFI payload displays the CPU
frequency correctly equal 3.4GHz in Boot Manager Menu, dmidecode shows
correct frequencies according to Intel ARK, 3.4GHz base and 3.9GHz turbo
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Iefbae6111d39107eacac7e61654311646c6981eb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47058
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
We already have RFI UPD settings to mitigate RFI noise issues in
platform. These UPDs were not getting filled via devicetree but
needed to be filled from fsp_params.c
Exporting these UPDs to chip.h will allow OEM/ODMs to fill it
directly from devicetree and also allow us to control it based
on boards instead of keeping it common across SoCs.
BUG=b:171683785
BRANCH=None
TEST=Compilation works and we're able to fill UPD from devicetree.Value
gets reflected in FSP UPDs.
Change-Id: I495cd2294368e6b3035c48b9556a83418d5632de
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47286
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The X86 Qemu targets use the AMD64 SMM save state, but unlike
most AMD CPU's the PM ACPI SMI port is not configurable and uses
the Intel default APM_CNT, 0xb2 port.
This will be used by the common save state handler.
Change-Id: Ifee9476f628a2df710fb4340ce6a19b008df1033
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45814
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently coreboot has limited use for the SMM save state. Typically
the only thing needed is to get or set a few registers and to know
which CPU triggered the SMI (typically via an IO write). Abstracting
away different SMM save states would allow to put some SMM
functionality like the SMMSTORE entry in common places.
To save place platforms can select different SMM save sate ops that
should be implemented. For instance AMD platforms don't need Intel SMM
save state handling.
Some platforms can encounter CPUs with different save states, which
the code then handles at runtime by comparing the SMM save state
revision which is located at the same offset for all SMM save state
types.
Change-Id: I4a31d05c09065543424a9010ac434dde0dfb5836
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44323
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The ASEG smihandler bails out if an unsupported SMM save state
revision is detected. Now we have code to find the SMM save state
depending on the SMM save state revision so reuse this to do the same.
This also increases the loglevel when bailing out of SMM due to
unsupported SMM save state revision from BIOS_DEBUG to BIOS_WARNING,
given that the system likely still boots but won't have a functioning
smihandler.
Change-Id: I57198f0c85c0f7a1fa363d3bd236c3d41b68d2f0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45471
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Create the genesis variant of the puff reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.2.0).
BUG=b:172620124
BRANCH=None
TEST=util/abuild/abuild -p none -t google/hatch -x -a
make sure the build includes GOOGLE_GENESIS
Signed-off-by: Matt Ziegelbaum <ziegs@chromium.org>
Change-Id: I70886c2c5a25f5de1a4941ff235547ee812fa50d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
This patch adds the PMC MUX and CONx devices for adlrvp. Device
specific method contains the port and orientation details used
to configure the mux.
BUG=b:170607415
TEST=Built and booted adlrvp. Verified the PMC.MUX CONx objects
in SSDT tables.
Change-Id: I3b5bb73991feb99577c16fea00c381dd0f855769
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
The resource function is called for each device VID/DID. Only add
the memory resource map from the boot CPU (bus 0) and not for each
socket/CPU. This is a NUMA architecture and has a shared memory map.
All the resources must match across the sockets/CPUs, so they should
only be added to the map once.
Change-Id: Ia336f604441ae8d30b8418300da7c34ab9907cae
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Correct PCIe clock source mapping in devicetree now that the GPIO
config has been fixed. Move ClkSrcUsage/ClkSrcClkReq registers
under their associated PCIe root ports.
Change-Id: Ibdaba51d971a39a6da6df82652b7420d7324dee5
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47221
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
In gpio.c file, we have community group array for each comm,
representing gpio groups within that community. Like there might be
group H,D, VGPIO and C within community 1. Community also may have
some reserved gpio and we also define those in an array which indicates
OS can't use those GPIO (through PAD_BASE_NONE)
Now when we define reserved pads in the middle of actual community
pads, it creates an issue while calculating an offset for GPIO
host own pad register. This is because function actually checks
current gpio index (lets say vgpio_39 in our case) and tries to get
group index from an array which we have defined. If we have defined
reserved gpios in between 2 communities, index calculated will also
account for reserved GPIO and register offset calculation will move
to next set of register (offset 0xC instead of offset 0x8).
Because of this coreboot won't configure HOST_OWN_PAD register correctly
and driver will not be able to get non-SMI interrupts for related gpio.
Align pad group as per EDS and pin-ctrl driver in linux kernel.
Reference: DOC#618876 (EDS volume 2)
BUG=None
BRANCH=None
TEST=VGPIO community index is correctly calculated. Drawlat board
boots fine with this change and warm reset also works.
Change-Id: Id6013914c88c50f4b8c60ca9a9285a8e1b214d11
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46842
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Multiple GPIOs were defined as a reserved GPIO in JasperLake. Correcting
this GPIOs with proper name to align with EDS volume 2
Also removing unused GPIOs at the end of community 4 (group E).
Since those reserved GPIOs are at the end of the community, it won't
affect the offset calculations within community. This change will also
help us aligning pad numbering with kernel pin-ctrl drivers too.
Reference: DOC#618876 (EDS volume 2)
BUG=None
BRANCH=None
TEST=Platform boots fine and basic functionality such as SD, Wifi works.
Change-Id: I8326b7181d47a177261656f51602638d8ce80fbb
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47232
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some devices, such as cameras, can implement a physical switch to
disable the input on demand. Think of it like the typical privacy
sticker on the notebooks, but more elegant.
In order to notify the system about the status this feature, a GPIO is
typically used.
The map between a GPIO and the feature is done via ACPI, the same way as
the reset_gpio works.
This patch implements an extra field for the described privacy gpio.
This gpio does not require any extra handling from the power management.
BUG=b:169840271
Change-Id: Idcc65c9a13eca6f076ac3c68aaa1bed3c481df3d
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46961
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Update Power Limit2 (PL2) minimum value to the same as maximum value
for magolor board. DTT does not throttle PL2, so this minimum value
change here does not impact any existing behavior on the system.
BUG=b:168353037
BRANCH=None
TEST=Build and test on magolor board
Change-Id: I74e960de506d366cba2c8aefb23f9e69337fd163
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47285
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
LTE module used in boten has a specific power on/off sequence.
GPIOs related to power sequnce are:
* GPP_A10 - LTE_PWR_OFF_R_ODL
* GPP_H17 - LTE_RESET_R_ODL
1. Power on: GPP_A10 -> 20ms -> GPP_H17
2. Power off: GPP_H17 -> 10ms -> GPP_A10
3. Warm reset: Power off -> 500ms -> Power on
Configure the GPIOs based on these requirements.
BUG=b:163100335
TEST=Build and boot Boten to OS. Ensure that the LTE module power
sequence requirements are met.
Change-Id: Ic6d5d21ce5267f147b332a4c9b01a29b3b8ccfb8
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Peichao Wang <pwang12@lenovo.corp-partner.google.com>
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Allow a USB device to define PowerResource in its SSDT AML code.
PowerResouce ACPI generation expects SoC to define the callbacks for
generating AML code for GPIO manipulation.
Device requiring PowerResource needs to define following parameters:
* Reset GPIO - Optional, GPIO to put device into reset or take it out
of reset.
* Reset delay - Delay after reset GPIO is asserted (default 0).
* Reset off delay - Delay after reset GPIO is de-asserted (default 0).
* Enable GPIO - Optional, GPIO to enable device.
* Enable delay - Delay after enable GPIO is asserted (default 0).
* Enable off delay - Delay after enable GPIO is de-asserted (default 0).
BUG=b:163100335
TEST=Ensure that the Power Resource ACPI object is added under the
concerned USB device.
Change-Id: Icc1aebfb9e3e646a7f608f0cd391079fd30dd1c0
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46713
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Peichao Wang <pwang12@lenovo.corp-partner.google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Copy lpit.asl to pep.asl to have a clean patch series without moving
files and to be able to keep the replace-patch CB:46471 as small as
possible to avoid confusion.
Change-Id: Ib1c019039ef0c518cf678af6109ba914b7f47bb6
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47245
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This change adds memory parts used by variant voema to
mem_parts_used.txt and generates DRAM IDs allocated to these parts.
Added memory
1. MT53E512M64D4NW-046 WT:E
2. MT53E1G64D8NW-046 WT:E
BUG=b:171755775
TEST=emerge-volteer coreboot chromeos-bootimage
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I24d466f92a7e0fa3ab2f6241f0b5af025c53ed98
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47228
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
This patch makes Atlas resume from S0ix by AC plug and unplug.
BUG=b:165328935
BRANCH=atlas
TEST=Put Atlas in suspend. Wake it up by AC plug.
TEST=Put Atlas in suspend. Wake it up by AC unplug.
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Change-Id: I95676d785bfc1488a8c1bdd3d56f2c38d95f3fb6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
This change adds two functions that provide an IPC mailbox method via
ACPI for runtime clock configuration.
pmc_acpi_fill_ssdt_ipc_write_method() will provide a method in the SSDT
that can be called by other ACPI devices to send an IPC mailbox command.
This function is exported because some SOCs override the default PMC
device and need to call this function to write the method into the SSDT.
pmc_acpi_set_pci_clock() will call the method defined by the previous
function to enable or disable the PCIe SRCCLK for a specified root port
and clock pin. It can be called by the PCIe root port after turning off
power to the attached device.
BUG=b:160996445
TEST=boot on volteer device and disassemble the SSDT to ensure that this
method exists.
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I95f5a1ba2bc6905e0f8ce0e8b2342ad1287a23a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46259
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
From Tigerlake FSP v3373 onwards vbt binary size changed from 8KiB
to 9KiB. Commit cf5d58328f had changed
the size from 8 to 9 Kib in drivers/gma. This change makes use of
Kconfig option to pick the size for tigerlake.
BUG=b:171401992
BRANCH=none
TEST=build and boot delbin and verify fw screen is loaded
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I21a0bba9ae01bac326f0f931641c98e8d308310f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47209
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
From Tigerlake FSP v3373 onwards vbt binary size changed from 8KiB
to 9KiB. Commit cf5d58328f had changed
the size from 8 to 9 Kib. This change adds Kconfig option to choose
vbt data size based on platform.
BUG=b:171401992
BRANCH=none
TEST=build and boot delbin and verify fw screen is loaded
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: Ia294fc94ce759666fb664dfdb910ecd403e6a2e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47151
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
acpigen_write_debug_namestr() - Debug = NAME
acpigen_write_return_namestr() - Return (NAME)
acpigen_set_package_op_element_int() - Set package pointer element
DeRefOf (PKG[ELEM]) = INT
acpigen_get_package_element() - Get package (not pointer) element
dest_op = PKG[ELEM]
acpigen_set_package_element_int() - Set package element to integer
PKG[ELEM] = INT
acpigen_set_package_element_namestr() - Set package element to namestr
PKG[ELEM] = NAME
acpigen_write_delay_until_namestr_int() - Delay while waiting for
register to equal expected value.
BUG=b:160996445
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I9b20a23872b7d4a50f03761032426ffbb722b9ee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47196
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
EEPROM in the camera module does not require any specific power
resources. This will ensure that no unnecessary resources are turned on
while accessing the camera EEPROM.
BUG=b:167938257
TEST=Build and boot to OS in Drawlat. Ensure that the camera EEPROM is
listed in the output of i2cdetect.
Change-Id: Iece9b3f657bf94a21cc08bf1745353575858f9b2
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47230
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Update Power Limit2 (PL2) minimum value to the same as maximum value for
dedede variants (baseboard and drawcia). Currently, variants like boten,
waddledee, waddledoo, metaknight and wheelie uses the DTT entries from
baseboard devicetree since there is no override present for these variants.
So, these variants will also reflect this change of PL1 minimum value.
For madoo variant, PL2 minimum value already set the same as PL2 maximum
value. DTT does not throttle PL2, so this minimum value change here does not
impact any existing behavior on the system.
BUG=None
BRANCH=None
TEST=Build and test on drawcia system
Change-Id: I7ecf1ffcc7871192ebe18eb8c3c3fd3e1193721e
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47154
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update Power Limit2 (PL2) minimum value to the same as maximum value for
jasperlake rvp board. DTT does not throttle PL2, so this minimum value
change here does not impact any existing behavior on the system.
BUG=None
BRANCH=None
TEST=Build and test on jasperlake rvp board
Change-Id: I862f7106846de5fb37f74419807eedc3096ded8a
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47201
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Production Volteer devices have Cr50 TPM connected via SPI, depending on
Cr50 firmware version it may or may not support long enough interrupt
pulses for the SoC to safely be able to enable lowest power mode.
Some reworked Volteer devices have had the Cr50 (Haven) TPM replaced
with Dauntless, communicating via I2C. The I2C drivers do not support
being accessed early in ramstage, before chip init and memory
mapping, (tlcl_lib_init() will halt with an error finding the I2C
controller base address.)
Since the Dauntless device under development can be made to support
longer interrupts, or a completely new interrupt signalling mode, there
is no need to try to go through the same discovery as is done via SPI.
This CL will skip the discovery, enabling the S0i3.4 sleep mode in all
cases, on the reworked test devices.
BUG=b:169526865, b:172509545
TEST=abuild -t GOOGLE_VOLTEER2 -c max -x
Change-Id: I08a533cede30a3c0ab943938961dc7e4b572d4ce
Signed-off-by: Jes Bodi Klinke <jbk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47049
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The current I2C3 bus frequency is 341 kHZ, which does not meet the spec.
This change updates scl_lcnt, scl_hcnt, sda_hold value for I2C3 to bring
the bus frequency closer to 400kHz.
BUG=b:153588771
TEST=Verified that I2C3 frequency is 394kHz.
Signed-off-by: Johnny Li <johnny_li@wistron.corp-partner.google.com>
Change-Id: Ie1ef95bb39d71fbb113120a0ec88305bc23e7ab9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47225
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
List of changes:
1. Use devicetree.cb from default location
2. Create variant directory for ADL RVP with external EC as
'adlrvp_p_ext_ec'
3. Add initial overridetree.cb for 'adlrvp_p' and 'adlrvp_p_ext_ec'
to override 'devicetree.cb' as applicable.
4. Move all common files between 'adlrvp_p' and 'adlrvp_p_ext_ec'
to mainboard directory
TEST=Build and boot both ADLRVP with onboard and external EC.
Change-Id: I3591e214ed32dc9baaa49b92dff59579f29c7bd6
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47335
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The OHCI header file declares various enums as follows:
enum { ... } enum_name;
Since the name is at the end, this is actually declaring a variable
called enum_name and *not* a type, which is causing a multiple
definition error in GCC 10. Move the enum_name before the opening brace
to prevent this.
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I452c0a1b118990942aa53f1e7e77f5e8378e8975
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Headers in libpayload define various structs like so:
struct struct_name { ... } __packed;
However, these header files do not include the compiler.h macro that
defines what __packed is, so they are actually defining a variable named
__packed and *not* declaring a packed struct. This leads to defining the
same variable multiple times, which was caught by GCC 10. Add compiler.h
to the compiler parameters so it is included in all files automatically.
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: Ia67182520dc94149e06fe9e03a14b3fc2ee29973
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47153
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Currently, there's no check for the table being programmed. This skips
programming a table if the table size is zero, or the pointer to the
table has been set to NULL.
BUG=None
TEST=Set table pointer to NULL, table doesn't run.
BRANCH=Zork
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I7d09b47e7d619428b64cc0695f220fb64c71ef4c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47307
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Setting registers 64h[19:18] = 2 and 68h[14:13] = 3 enables OBFF, and
setting registers 64h[19:18] = 0 and 68h[14:13] = 0 disables OBFF.
Register at offset 0x64 is DCAP2, and offset 0x68 is DCTL2.
However, current code doesn't account for this. The result is that
register 64h[19:18] = 2 and 68h[14:13] = 0, which means the hardware is
OBFF-capable but support is disabled, which makes no sense. Given that
reference code and Broadwell both disable OBFF, disable it here too.
Change-Id: I6c1cafdb435ee22909b077128b3ae5bde5543039
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47240
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Testing shows that these registers are backwards. Use the definitions
from Broadwell instead. All affected boards use the same value for both.
Change-Id: Ie47c9fddc2e9e15ce4c64821ea3a69356ac31b1a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47234
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
For all these southbridges, the lower nibble of PCICMD is read-only.
Tested on Asrock B85M Pro4 (Lynxpoint-H), LPC's PCICMD does not change.
Change-Id: Ib3b16b1b9651f7f3bd06ff8bc27dafd8a323e93c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47038
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Intel CPX-SP FSP ww45 release annotates default values for FSP-M UPD
variables.
FSPM MemRefreshWatermark option support is present in FB's CPX-SP
FSP binary, but not in Intel's CPX-SP FSP binary. In FB's CPX-SP
FSP binary, this option takes the space of UnusedUpdSpace0[0].
For DeltaLake mainboard, if corresponding VPD variable is set, use it
to control the behavior. Such control is effective when FB's CPX-SP
FSP binary is used.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I57ad01f33b92bf61a6a2725dd1cdbbc99c02405d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46640
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
NOC errors detected at runtime in AOP SRAM region
strongly suggested speculative memory accesses were occurring
in memory regions that either don't exist or are device memory
rather than SRAM.
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Change-Id: I6611dc614c80063c7df057b59337417c8f56fd9c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
On picasso's psp_verstage, the vboot hash is being calculated by
hardware using relatively expensive system calls. By increasing the
block size, we can save roughly 150ms of boot and S3 resume time.
TEST=Build & boot see that boot time has decreased.
BRANCH=Zork
BUG=b:169217270 - Zork: SHA calculation in vboot takes too long
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I6642073357327811b415dcbcad6930ac6d2598f9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46903
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Increasing the vboot hash buffer size greatly speeds up the SHA
calculations. Going from a standard 4k buffer to a 36k buffer
takes ~150ms of the boot and resume time.
TEST=Build & boot see that boot time has decreased.
BRANCH=Zork
BUG=b:169217270 - Zork: SHA calculation in vboot takes too long
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: Ibca868ad7be639c2a0ca1c4ba6d71123d8b83c92
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46902
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Generally, this size probably doesn't matter very much, but in the
case of picasso's psp_verstage, the hash is being calculated by
hardware using relatively expensive system calls. By increasing the
block size, we can save roughly 140ms of boot and resume time.
TEST=Build & boot see that boot time has decreased.
BRANCH=Zork
BUG=b:169217270 - Zork: SHA calculation in vboot takes too long
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I68eecbbdfadcbf14288dc6e849397724fb66e0b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Continue Xeon-SP de-duplication.
Move CPU helper functions from skx/ and cpx soc_util.c to common util.c.
Functions only used by util.c are updated to be static.
The following functions are moved:
int get_threads_per_package(void);
int get_platform_thread_count(void);
const IIO_UDS *get_iio_uds(void);
unsigned int soc_get_num_cpus(void);
void get_core_thread_bits(uint32_t *core_bits, uint32_t *thread_bits);
void get_cpu_info_from_apicid(uint32_t apicid, uint32_t core_bits,
uint32_t thread_bits, uint8_t *package, uint8_t *core, uint8_t *thread);
void xeonsp_init_cpu_config(void);
Change-Id: I118a451b9468459cf2c2194f31da1055e1435ebe
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47170
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Disable C1 C-state auto demotion to decrease SoC power usage.
When set, processor will conditionally demote C3/C6/C7 requests
to C1 based on uncore auto-demote information.
BUG=b:161215906
TEST=Measure and confirm SoC power usage reduction for key use cases
eg 'Google Meets video call'
Measured on instrumented boards for Volteer EVT and Delbin.
Below measurements for Volteer:
Google meets with 720p w/ auto-demotion w/o auto-demotion
System Power 13.14W 9.4W
SOC Power 7.9W 5.4W
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Signed-off-by: Shweta Malik <shweta.malik@intel.com>
Change-Id: I649cafbaf03917d76521aa5f76ec58d218e1a1b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Since the mainboard Kconfig is sourced before the SoC one, it would
still be possible to override this setting at mainboard level, even
though that shouldn't be needed. The maximum CPU count for Picasso is 8,
since the chips have only up to 4 cores with up to two threads each.
Change-Id: I53449b8fa73c5d13e6ea77bee6eed8896b7d3ec3
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47205
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Integrated TypeC MUX is used only in certain SoCs and hence the missing
devicetree configuration is not an error. Remove the check for internal
TypeC MUX device and the associated debug statement.
BUG=b:172186858
TEST=Build and boot to OS in Drawlat.
Change-Id: Ieb76e1ccfd04f1628617b2665b05be6718a25f81
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47175
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
These are generated by inteltool + intelp2m and reflect the
pad configuration of the vendor (AMI) firmware at a specific
point in time, but do not always reflect the correct configuration
of a given pad as per the schematics, so drop them.
Change-Id: Ie337cca5bc0e87a5426cceae8d7ec29ab14a1729
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47200
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Provide necessary romstage hooks to allow unblocking the memory with
SCLEAN. Note that this is slow, and took four minutes with 4 GiB of RAM.
Tested on Asrock B85M Pro4 with tboot. When Linux has tboot support
compiled in, booting as well as S3 suspend and resume are functional.
However, SINIT will TXT reset when the iGPU is enabled, and using a dGPU
will result in DMAR-related problems as soon as the IOMMU is enabled.
However, SCLEAN seems to hang sometimes. This may be because the AP
initialization that reference code does before SCLEAN is missing, but
the ACM is still able to unblock the memory. Considering that SCLEAN is
critical to recover an otherwise-bricked platform but is hardly ever
necessary, prefer having a partially-working solution over none at all.
Change-Id: I60beb7d79a30f460bbd5d94e4cba0244318c124e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Since the Librem Mini does not run on battery power, SaGv has little
benefits and noticeably slows down testing, since memory training is
run twice. Disabling SaGv cuts the 30-second cold boot time in half.
Change-Id: Ib02e42dcb4f20fdbdca85456c0dceafc59c782d8
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47082
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Rename `lpt_lp.asl` and place all Lynxpoint-LP GPIO ASL there. It has
been named `gpio.asl` to ease diffs between Lynxpoint and Broadwell.
Tested with BUILD_TIMELESS=1, Google Panther does not change.
Change-Id: I7cc4ab3371014be783761f110542471a8c0157a3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46774
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Commit 2e1f764 (sb/intel/common/acpi/irqlinks.asl: Add missing IRQs)
added these IRQs for Lynx Point and earlier southbridges. Follow suit
for Broadwell, since it also supports them. Vendor firmware of the Asus
X555LAB laptop also contains these IRQs, as per the disassembled DSDT.
Change-Id: If857352dd25ba61c1f09c1ff4358efafdc3a5c73
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46758
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PL2 was set artificially low during development when the active cooling
fan was not functional, and never corrected once the fan was fixed.
Raise PL2 to a value which works with both Librem Mini variants.
Change-Id: Ie377392020f73359aed80ddae727adb6f8d06344
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47186
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Move the global CPPC package \GCPC to the first logical core CP00 and
adapt the reference in the other cores. This is cleaner and avoids
confusion.
Test: dumped SSDT on Supermicro X11SSM-F and verified decompiled version
Change-Id: I40b9fd644622196da434128895eb6fb96fdf254d
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46465
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add some mechanics to automatically have a `qemu` make target for
supported configurations. So with a QEMU target selected in Kconfig,
one would ideally only have to run `make qemu` to test things.
There are some notable variables that can be set or adapted in
`Makefile.inc` files, the make command line or the environment.
Primarily for `Makefile.inc` use:
QEMU-y the QEMU executable
QEMU_CFG-y a QEMU config that sets the available default devices,
used to run more comprehensive tests by default,
e.g. many more PCI devices
For general use:
QEMU_ARGS additional command line arguments (default: -serial stdio)
QEMU_EXTRA_CFGS additional config files that can add devices
QEMU_CFG_ARGS gathers config file related arguments,
can be used to override a default config (QEMU_CFG-y)
Examples:
$ # Run coreboot's default config with additional command line args
$ make qemu QEMU_ARGS="-cdrom site-local/grml64-small_2018.12.iso"
$ # Force QEMU's built-in config
$ make qemu QEMU_CFG_ARGS=
Change-Id: I658f86e05df416ae09be6d432f9a80f7f71f9f75
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The CAR set up by FSP-T is at base 0xfe800000 and has a 0x200000 size.
FSP-M seems to have a very large stack usage so it would overflow
other car symbols located below the coreboot stack such as timestamps
and the pre-ram console, which are now fixed.
TEST: boot with ocp/deltalake.
Change-Id: I886f9391ad79fcfa0724109393e3781a08d954b4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46895
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The `find_resource` function will never return null (will die instead).
Given that the existing code gracefully handles null pointers already,
it is reasonable to replace these function calls with `probe_resource`.
Change-Id: Ibd8f5ebd561cbde22ce5cd83de8270177bad1344
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47101
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
- Move the SoC select to board config (vs baseboard config)
- Qualify the VGA PCI ID and CBFS size values based on board selection
- Move devicetree to variant dir and add Kconfig entry
- Use a separate board_info.txt for the baseboard and each variant
Change-Id: I4764f2c1243ea49bd08e0735865cc3cb7a66441f
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47051
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Since Whiskeylake SoC code is actually a subset of soc/intel/cannonlake,
rename the baseboard so that boards using other 'cannonlake family' SoCs
(e.g., Cometlake) can be added with minimal confusion.
Rename the mainboard dir and baseboard name, and adjust any references
to them.
Change-Id: I2af7977f1622070eb8bf8449bc8306f9d75b9851
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47050
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
When asked to place cbmem_top(), FSP does not seem to care about
alignment. It can return an address that is MTRR poison, which will
exhaust all variable MTRRs when trying to set up caching for CBMEM.
This will make memory-mapped flash and TSEG caching fail as well.
Safeguard against this by aligning the region to cache to half of its
size, and move it upwards to compensate. It is assumed that caching
memory above the provided bootloader TOLUM address is inconsequential.
TEST=Boot Purism Librem Mini WHL, observe no MTRR exhaustion error
messages in console. The boot process also feels more fluid.
Change-Id: Ic64fd6d3d9e8ab4c78d68b910a476f9c4eb2d353
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45930
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
When getting the address of a structure's member that is not on
offset 0, GCC9+ assumes that the address can never be NULL. However
the code relied on the fact that it can be NULL by letting the pointer
intentionally overflow.
Manually calculate the address using uintptr_t. This allows to
gracefully terminate the list_for_each MACRO instead of crashing at the
end of the list.
Tested on qemu-system-arm:
coreboot no longer crashed in the devicetree parser and is able to boot
Linux 5.5.
Change-Id: I0d569b59a23d1269f8575fcbbe92a5a6816aa1f7
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44573
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This is not meant for actual use, but to build-test several options.
Please do not try to use it on real hardware. Or maybe do try.
The purpose of this config is to build-test the individual options, not
their combination. So, for instance, if it would be hard to keep options
x, y and z build together in the future, this config shouldn't block a
change but should instead be adapted, e.g. split into multiple chunks.
Change-Id: Ife40d055e4c9b295c54cfc6a27af06e9358f7761
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45974
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The purpose of this config is to build-test the individual options, not
their combination. So, for instance, if it would be hard to keep options
x, y and z build together in the future, this config shouldn't block a
change but should instead be adapted, e.g. split into multiple chunks.
Change-Id: Ibd8f6513fae6cd02fcf889d2510dc7e0a97ce40c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47068
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Initialize timestamp table with data from psp_verstage on bootblock.
PSP keeps its own timestamp and pass it in transfer_buffer. However PSP
timestamp and TSC may be out of sync so we can't just merge two tables
without modification.
info->timestamp contains PSP's clock value (in us) when x86 processor
released and base_timestamp contains TSC value when bootblock is
started. The time between x86 release and bootblock entry should be very
short so we can think those two happened at the same time and use them
for sync.
In some cases there will be underflow in timestamp entries but cbmem
utility can handle wrap-over in entries. Few timestamp values including
1st timestamp can be very large but we can still get the time spent on
boot without any problem.
BUG=b:159220781, b:167148121, b:171422583
BRANCH=zork
TEST=boot to kernel, run 'cbmem -t' and check verstage timestamps are
included in the result.
Change-Id: I5e89bb54f478153fb40ba51b5ab61fa20af3b99a
Signed-off-by: Kangheui Won <khwon@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45059
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On Zork(picasso) platform we run verstage on the PSP. It has its own
timer, but the frequency is not matched with TSC.
To ease the work to merge timestamps from the PSP and TSC, add a layer
around tsc to have microsecond granularity for timestamp table. PSP
already records timestamp in microseconds.
BUG=b:159220781
BRANCH=zork
TEST=build, flash and boot, check timestamps are correct
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: Ifced4a84071be8da547e252167ec21cd42f20ccc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46058
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This introduces a Kconfig option for compiling coreinfo with LTO.
This option can be used independently of LTO in libpayload, though will
benefit most if that is enabled as well. If both are enabled, the
final size of coreinfo.elf is reduced from 95 KiB to 92 KiB.
Tested in QEMU and on Thinkpad T500.
Change-Id: I6feacdb911b52b946869bff369e03dcf72897c9f
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38293
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Link time optimization is a technique for whole-program optimization.
Instead of doing code generation during compilation, the compiler saves
its intermediate representation to the object files. During the final
linking step, it will then merge all the object files together and
perform optimizations on the entire program. This can often reduce the
final binary size, but also may increase the total compilation time.
This patch introduces a Kconfig option for enabling link time
optimization in libpayload. Since libpayload does no linking of its own,
its LTO archive files will contain only IR and no generated code.
Downstream projects will need to use LTO-aware tools when manipulating
the archives (eg. gcc-ar and gcc-nm), but otherwise do not need to use
LTO themselves -- the compiler will recognize which files are LTO and
which are not, so enabling this option should mostly be "drop in".
For example, when building coreinfo.elf using tinycurses libpayload:
binary size compilation time
default 114 KiB 11.49s
LTO 95 KiB 10.36s
In this case the total compilation time was actually shorter -- despite
the final linking step taking longer, this was offset by the shorter
compilation times for each individual file (since there is no code gen
until the very end).
Change-Id: I048f2ff6298ed0d891098942e1e8b29d35487b91
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38291
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With Innolux panel timings, the fetch_start has evaluated to be more than
v_total which is invalid. Add a check to accommodate the extra h_total addition
in fetch_start calculation. Secondly, made the prefill line requirement
same as Kernel driver.
Change-Id: If7624c0b28421759fdf47dd92f23214a78058199
Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Add the USB ports to the devicetree for describing them in ACPI,
including defining the port relationships and defining the reset
GPIO for the bluetooth device.
BUG=b:151731851
TEST=tested on volteer, all other boards were checked against the
latest available schematic.
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: Ia1e5b71e7750a478ff79372c48616bbf5c21b79c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This patch removes all redundant reset code block from each SoC
and make use of common reset code block(fsp_reset.c) based on
SOC_INTEL_COMMON_FSP_RESET.
Respective SoC Kconfig to choose correct FSP global reset type as
per FSP integration guide.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I71531f4cf7a40efa9ec55c48c2cb4fb6ea90531f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45337
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Create SOC_INTEL_COMMON_FSP_RESET Kconfig to have IA common code block
to handle platform reset request raised by FSP. The FSP will use the
FSP EAS v2.0 section 12.2.2 (OEM Status Code) to indicate that a reset
is required.
Make FSP_STATUS_GLOBAL_RESET depends on SOC_INTEL_COMMON_FSP_RESET.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I934b41affed7bb146f53ff6a4654fdbc6626101b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47017
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
We are implementing a mechanism in coreboot to update CSME firmware,
this requires coreboot to be able to read CSME region. Exposing the
CSME data is not an issue since the data stored by CSE is all encrypted.
This patch provides a command line option "-r" which will enable read
access to CSME region when locking.
Without this change, locking SPI regions using ifdtool will block BIOS
access to read/access CSME. This will cause failure since BIOS can't
read basic information such as CSME version.
TEST=Flashrom returns success while erasing the SI_ME region.
After rebooting the DUT, DUT boots into OS without any issues on
Drawlat EVT.
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I1d9a8e17fba19b717453476fbcb7bcf95b278abe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
As an intermediate step for CB:45150, add an additional Kconfig option
which is used to configure bus mastering for any devices and use
PCI_ALLOW_BUS_MASTER to allow coreboot setting the bus mastering bit in
general.
Change-Id: I33b37a79022007a16e97350db61575b63fa8256b
Signed-off-by: Felix Singer <felix.singer@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45149
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In order to support the common PMC functions this device needs to
be able to be located with the common lookup macro.
BUG=b:160996445
TEST=build intel/harcuvar board
Change-Id: If04a82582c07c15bf841d0baa84e31561d211502
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46642
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For development of the firmware to run on the Dauntless TPM, a number of
Volteer2 devices are being reworked to replace the H1 chip with probe
wires to connect to an external Dauntless development board.
Some modification to the AP firmware is required, not least because the
Dauntless chip is connected via I2C bus, instead of SPI. Most of the
Dauntless developers will not otherwise have a Chrome OS chroot.
Because of the above, I think it makes sense to have a new variant, for
the reworked devices, which I intend to create with this CL.
BUG=b:169526865
TEST=abuild -t GOOGLE_VOLTEER2_TI50 -c max -x
Change-Id: Ibdcd6c2ce3941c229518f21f0e479890b5d76dd1
Signed-off-by: Jes Bodi Klinke <jbk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46437
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
* Use heap for linker script calculated constant to fix relocation
symbols in mixed assembly code.
Tested on HPZ220:
* Still boots in x86_32.
Tested on Lenovo T410:
* Doesn't need the MMX register fix in long mode.
Change-Id: I3e72a0bebf728fb678308006ea3a3aeb92910a84
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44673
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Add supported memory parts in the mem_parts_used.txt and generate the
SPD ID for the parts. The memory part being added is:
MT53E512M32D2NP-046 WT:E
K4U6E3S4AA-MGCR
H9HCNNNBKMMLXR-NEE
MT53E1G32D2NP-046 WT:A
K4UBE3D4AA-MGCR
BUG=b:169813211
TEST=Build the metaknight board.
Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Change-Id: I0d0d22f4790f66b5265803e4dcf01234a16b1993
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
We can skip the PIT-based TSC calibration if we can derive the invariant
TSC rate from CPUID/MSR data. This is necessary if the PIT is disabled,
which is the default, for instance, on Coffee Lake CPUs.
This implementation should cover all Intel Core i processors at least.
For older processors, we fall back to the PIT calibration.
Change-Id: Ic6607ee2a8b41c2be9dc1bb4f1e23e652bb33889
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34170
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Create the voema variant of the volteer reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.2.0).
BUG=b:171755775
BRANCH=None
TEST=util/abuild/abuild -p none -t google/volteer -x -a
make sure the build includes GOOGLE_VOEMA
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I4e1872d1ebff6fefdfb232f1ff82fce95a1ec643
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47007
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds the dependency on SOC_INTEL_CSE_LITE_SKU for the
following configs:
1. SOC_INTEL_CSE_FMAP_NAME
2. SOC_INTEL_CSE_RW_CBFS_NAME
3. SOC_INTEL_CSE_RW_FILE
These configs aren't really useful for platforms not using CSE Lite
SKU.
Change-Id: Id48ab36b7e75301d50122916d153f494d755ae77
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46905
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change drops the PCI IDs for Jefferson Peak and Harrison Peak
CNVi modules from wifi/generic drivers as well as pci_ids.h. These IDs
actually represent the CNVi WiFi controller PCI IDs and are now
supported by intel/common/block/cnvi driver.
The only ID that is being dropped without adding support in
intel/common/block/cnvi driver is
PCI_DEVICE_ID_HrP_6SERIES_WIFI(0x2720) since this was not found in the
list of PCI IDs for any SoC.
Change-Id: I82857a737b65a6baa94fb3c2588fe723412a7830
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46866
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change reorganizes the CNVi device entries in mainboard
devicetree/overridetree and SoC chipset tree to make it consistent
with how other SoC internal PCI devices are represented i.e. without a
chip driver around the SoC controller itself.
Before:
chip drivers/wifi/generic
register "wake" = "..."
device pci xx.y on end
end
After:
device pci xx.y on
chip drivers/wifi/generic
register "wake" = "..."
device generic 0 on end
end
end
Change-Id: I22660047a3afd5994400341de0ca461bbc0634e2
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46865
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This change adds a common block driver for CNVi WiFi/BT controllers in
Intel SoCs. This driver uses the common PCI dev operations in addition
to generating ACPI device node and returning ACPI name for the
controller device.
This change also selects this driver for CML, GLK, ICL, JSL and TGL.
Change-Id: I69a832be918d4b9f4fbe3a40913d4542a457a77c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This change reorganizes drivers/wifi/generic to add a new
device_operations structure for dummy CNVi device. This is done to
make the organization of CNVi PCI device in devicetree consistent
with all the other internal PCI devices of the SoC i.e. without a chip
around the PCI device.
Thus, with this change, CNVi entry in devicetree can be changed from:
```
chip drivers/wifi/generic
register "wake" = "xxyyzz"
device pci xx.y on end # CNVi PCI device
end
```
to:
```
device pci xx.y on
chip drivers/wifi/generic
register "wake" = "xxyyzz"
device generic 0 on end # Dummy CNVi device
end
end # CNVi PCI device
```
The helper functions for ACPI/SMBIOS generation are also accordingly
updated to include _pcie_ and _cnvi_ in the function name.
Change-Id: Ib3cb9ed9b81ff8d6ac85a9aaf57b641caaa2f907
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46862
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change splits `wifi_generic_fill_ssdt()` into following two
functions:
1. `wifi_ssdt_write_device()`: This function writes the device, its
address, _UID and _DDN.
2. `wifi_ssdt_write_properties()`: This function writes the properties
for WiFi device like _PRW, regulatory domain and SAR.
This split is done so that the device write can be skipped for
CNVi devices in follow-up CLs. It will allow the SoC controller
representation for CNVi PCI device to be consistent with other
internal PCI devices in the device tree i.e. not requiring a
chip driver for the PCI device.
Because of this change, _PRW and SAR will be seen in a separate
block in SSDT disassembly, but it does not result in any functional
change.
Observed difference:
Before:
Scope (\_SB.PCI0.PBR1)
{
Device (WF00)
{
Name (_UID, 0xAA6343DC)
Name (_DDN, "WIFI Device")
Name (_ADR, 0x0000000000000000)
Name (_PRW, Package() { 0x08, 0x03 })
}
}
After:
Device (\_SB.PCI0.PBR1.WF00)
{
Name (_UID, 0xAA6343DC)
Name (_DDN, "WIFI Device")
Name (_ADR, 0x0000000000000000)
}
Scope (\_SB.PCI0.PBR1.WF00)
{
Name (_PRW, Package() { 0x08, 0x03 })
}
Change-Id: I8ab5e4684492ea3b1cf749e5b9e2008e7ec8fa28
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This change reorganizes the WiFi generic driver to move the ACPI
functions to a separate file. This change is done to reduce the noise
in generic.c file and improve readability of the file.
Change-Id: If5fafb5452fb5bad327be730fcfc43d8a5d3b8ec
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46860
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This change reorganizes the WiFi generic driver to move the SMBIOS
functions to a separate file. This change is done to reduce the noise
in generic.c file and improve readability of the file.
Change-Id: I38ed46f5ae1594945d2078b00e8315d9234f36d7
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46859
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Instead of having the same linker layout for the transfer buffer between
the x86 & PSP linker layout scripts, put the common layout into a file
shared between the other linker scripts.
BUG=None
TEST=Boot zork board, verify the buffers are aligned.
BRANCH=Zork
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: Ib9d9d8b046bc9e9e7a4ee939324960bfc44c3508
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46900
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The CONFIG_MAINBOARD_PART_NUMBER string can have characters in it that
don't work in the doxyplatform make script under sh, so change any
non-alphanumeric characters to an underscore.
Also strip all the quotes - they aren't needed.
The spaces in the "QEMU x86 i440fx/piix4" platform are one example of
this.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I10bc6a8a245a34e89c859ff46835bde35aaa4286
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The "Nominal Performance" is not the same as the "Guaranteed
Performance", but is defined as the performance a processor can deliver
continously under ideal environmental conditions.
According to edk2, this is the "Maximum Non-Turbo Ratio", which needs to
be read from MSR_PLATFORM_INFO instead of IA32_HWP_CAPABILITIES.
Correct the entry in the CPPC package.
Test: dumped SSDT from Supermicro X11SSM-F and checked decompiled
version
Change-Id: Ic2c27fd3e14af18aa4101c0acd7a5ede15d1f3a9
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46464
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GPIO D4 was used for camera reset for both front and rear cameras
(RCAM_RST_L/FCAM_RST_L) in RIPTO. For later volteer versions,
GPIO F15 is dedicated to the rear camera reset (RCAM_RST_L).
Before, BOARD_GOOGLE_VOLTEER flag was used for setting the right
RCAM_RST_L per volteer version. However, we don't support RIPTO
anymore. Also using flags for different volteer version support can
be error-prone. Removing RIPTO support.
BUG=b:171726823
BRANCH=none
TEST=Build and boot volteer proto2 or later version. Camera should
work without an issue.
Signed-off-by: Daniel Kang <daniel.h.kang@intel.com>
Change-Id: I961fc17092887b4807c12c95f7139bb7e7b33e91
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46826
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The min86 example SoC code along with the example mainboard
should serve as a minimal example how a buildable x86 SoC code
base can look like.
This can serve, for instance, as a basis to add new SoCs to
coreboot. Starting with a buildable commit should help with
the review of the actual code, and also avoid any regressions
when common coreboot code changes.
As the example code itself is build-tested, it should advance
with coreboot and can't rot like documentation might. It also
serves as a check what APIs need to be implemented with the
default Kconfig settings.
Change-Id: Id76ab15fe77ae3e405c43f9c8677694f178be112
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45710
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
LTE module Fibocom L850-GL is lost after idle overnight,
with this workaround, host will not initiate U3 wakeup
at the same time with device, which will avoid the race condition.
If this option is set in the devicetree, the bits[7:4] in XHCI MMIO BAR +
offset 0x80A4 (PMCTRL_REG) will be updated from default 9 to 0.
BUG=b:169645448
BRANCH=octopus
TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash
the image to the device. Run following command to check if
bits[7:4] is set 0:
>iotools mmio_read32 "XHCI MMIO BAR + 0x80A4"
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I3a04320b0e2441dce540a5afdc461f12de45c41b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46868
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marco Chen <marcochen@google.com>
Increase timeout for CPUs to check in after 2nd SIPI completion
from 10ms to 100ms.
Update logging level for mp init failure cases from BIOS_DEBUG
to BIOS_ERR.
Without this patch, "mp initialization failure" happens on some
reboots on DeltaLake server. As consequence, not all 52 cpus
come up in Linux:
[root@localhost ~]# lscpu
...
CPU(s): 40
Also following Hardware Errors are seen:
[ 4.365762] mce: [Hardware Error]: Machine check events logged
[ 4.366565] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 9: ee2000000003110a
[ 4.367561] mce: [Hardware Error]: TSC 0 ADDR fe9e0000 MISC 228aa040101086
[ 4.368563] mce: [Hardware Error]: PROCESSOR 0:5065b TIME 948438164 SOCKET 0 APIC 0 microcode 700001d
With this patch, no such failure is observed with 370 reboots.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: Iab10f116dd4af152c24d5d8f999928c038a5b208
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46898
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable the USB4 XHCI driver and remove the ACPI name entry from the
SOC level function.
Define aliases for the USB2/3 ports on north and south XHCI devices in
chipset.cb so they can be referenced in the mainboard devicetree.
BUG=b:151731851
TEST=define usb ports by reference in volteer devicetree and ensure
they get properties added in SSDT for both north and south XHCI device.
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I724ca874d3a3f6a2b43a700b0b10f77f25c53ee0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46852
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
In order to generate ACPI entries for USB devices attached to the
USB4/TBT/TCSS/North XHCI device it needs to have a driver that will
enumerate static devices on the bus. This driver does that and nothing
else.
BUG=b:151731851
TEST=boot on volteer and check for USB devices on \_SB.PCI0.TXHC.RHUB
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I5a2ff1cd1bed557e793d45119232cf87032ddd7b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46851
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add and use resource allocator helper functions from cpx. It also
simplifies the allocator by removing IORESOURCE_PCI64 from the resource
type check. It isn't needed since it is an attribute of IO and MEM and
will be added with the appropriate type.
This clean up matches CPX and will help with merging in the future.
Change-Id: I5812b07ba00eeafb4d1e826e9cdf9a659b0248bb
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46306
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There are currently 3 different strapping ID entries in the coreboot
table, which adds overhead. The new fw_config field is also desired in
the coreboot table, which is another kind of strapping id. Therefore,
this patch deprecates the 3 current strapping ID entries (board ID, RAM
code, and SKU ID), and adds a new entry ("board_config") which provides
board ID, RAM code, SKU ID, as well as FW_CONFIG together.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I1ecec847ee77b72233587c1ad7f124e2027470bf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46605
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
We all knew this was coming, 32 bits is never enough. Doing this early
so that it doesn't affect too much code yet. Take care of every usage of
fw_config throughout the codebase so the conversion is all done at once.
BUG=b:169668368
TEST=Hacked up this code to OR 0x1_000_0000 with CBI-sourced FW_CONFIG
and verify the console print contained that bit.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I6f2065d347eafa0ef7b346caeabdc3b626402092
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45939
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Now that device aliases can be used in the devicetree, the hacky function
'soc_get_pmc_mux_device' can be removed and replaced with pointers to the
devices the function was supposed to return (1 for each port).
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ie00834c79bd5304998adaccb388ae74a108192b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45747
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The current I2C5 bus frequency is 367 kHZ, which does not meet the spec.
This change updates scl_lcnt, scl_hcnt, scl_hcnt value for I2C5 to bring
the bus frequency closer to 400kHz.
BUG=b:153588771
TEST=Verified that I2C5 frequency is between 389-396kHz.
Signed-off-by: Johnny Li <johnny_li@wistron.corp-partner.google.com>
Change-Id: If0803a74ba9071acf15486ce4038261c1681a92f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Align coreboot's PSP MboxBiosCmdSmmInfo setup to how AGESA's PSP
library was implemented. The trigger address must be an SMI trigger
register. Assign one of the reserved triggers to the PSP.
The #define of SMITYPE_PSP 33 is still correct and is intentionally
unmodified.
This patch should be innocuous as the system doesn't currently support
SMI-based features of the PSP. The call only exists so the PSP will
honor a mailbox command during S3 suspend.
BUG=b:171815390
TEST=Run SST on Morphius
BRANCH=Zork
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I74029271a522a4f23e54fd76f99a8e3eb0dd4d55
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46854
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch hooks coreboot up to the new commonlib/bsd CBFS
implementation. This is intended as the "minimum viable patch" that
makes the new implementation useable with the smallest amount of changes
-- that is why some of this may look a bit roundabout (returning the
whole metadata for a file but then just using that to fill out the rdevs
of the existing struct cbfsf). Future changes will migrate the higher
level CBFS APIs one-by-one to use the new implementation directly
(rather than translated into the results of the old one), at which point
this will become more efficient.
Change-Id: I4d112d1239475920de2d872dac179c245275038d
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38422
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds a new CBFS implementation that is intended to replace
the existing commonlib/cbfs.c. The new implementation is designed to
meet a bunch of current and future goals that in aggregate make it
easier to start from scratch than to adapt the exisiting implementation:
1. Be BSD-licensed so it can evetually be shared with libpayload.
2. Allow generating/verifying a metadata hash for future CBFS per-file
verification (see [1][2]).
3. Be very careful about reading (not mmaping) all data only once, to be
suitable for eventual TOCTOU-safe verification.
4. Make it possible to efficiently implement all current and future
firmware use cases (both with and without verification).
The main primitive is the cbfs_walk() function which will traverse a
CBFS and call a callback for every file. cbfs_lookup() uses this to
implement the most common use case of finding a file so that it can be
read. A host application using this code (e.g. coreboot, libpayload,
cbfstool) will need to provide a <cbfs_glue.h> header to provide the
glue to access the respective CBFS storage backend implementation.
This patch merely adds the code, the next patch will integrate it into
coreboot.
[1]: https://www.youtube.com/watch?v=Hs_EhewBgtM
[2]: https://osfc.io/uploads/talk/paper/47/The_future_of_firmware_verification_in_coreboot.pdf
(Note: In early discussions the metadata hash was called "master hash".)
Change-Id: Ica64c1751fa37686814c0247460c399261d5814c
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38421
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Flesh out the PCH configuration into a separate chip. Keep it within the
Broadwell SoC directory for now, to ease moving files around. The boards
were prepared beforehand and the devicetrees require next to no changes.
Tested on out-of-tree Acer Aspire E5-573, still boots.
Change-Id: I28d948f3e6d85e669d12b29516d867c1d1ae9e1a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46700
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit fa42d568a0.
Reason for revert: Passes in an incompatible structure and only happens
to boot by chance. Moreover, Broadwell will soon be merged with Haswell
and this requires Broadwell to not depend on any Intel common SoC code.
Tested on out-of-tree Acer Aspire E5-573, PL values are correct again.
Change-Id: I6e8e000dba8ff09fab4e6f174ab703348dcd6a96
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45011
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Commit 360684b (soc/intel/common: add TCC activation functionality) made
Broadwell use common SoC code. However, this makes Broadwell depend on
SoC code, which prevents splitting Broadwell into CPU, northbridge and
southbridge, a stepping stone before merging with Haswell and Lynxpoint.
Tested on out-of-tree Acer E5-573, still boots.
Change-Id: Ib7ab4e75bd4416dde4612e67405a871da569008a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46731
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
`chip` entries are only hooked up via device nodes to the tree. A `chip`
without a `device` below it does nothing. To allow variants to override
SATA tuning parameters, ensure a device exists under the PCH chip scope.
Without this change, some variants would not properly override the SATA
tuning parameters after extracting the PCH parts into a different chip.
TEST=Sanity-check static.c and verify overridetrees override properly.
Change-Id: I013dbe1403567b93c8ee0e66f76481f2a3f42796
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46769
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Create the ambassador variant of the puff reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.2.0).
BUG=b:171561514
BRANCH=None
TEST=util/abuild/abuild -p none -t google/hatch -x -a
make sure the build includes GOOGLE_AMBASSADOR
Signed-off-by: Matt Ziegelbaum <ziegs@chromium.org>
Change-Id: Ib0e3a813a120a4a8e984f3a89dc3ba100d94da95
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add general debug macros that print resource information.
These are available to select if DEFAULT_CONSOLE_LOGLEVEL_8.
The macros are helpful in debugging complex resource allocation
with multiple buses. The macros are moved from soc/intel/xeon_sp,
where they were originally developed.
Change-Id: I2bdab7770ca5ee5901f17a8af3a9a1001b6702e4
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46304
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Drop useless writes to read-only registers and don't re-write
default 0x00 values. In detail:
* Don't write read-only status registers.
* Don't try to write input bits in data registers
(iow. mask data values: `data &= ~io`).
* Don't write data registers if all GPIOs are set as
inputs (`io == 0xff`).
* Don't write default 0x00 for inversion and multiplex
registers.
Note: Both GPIO0 and WDT1 values look spurious. Maybe they
were dumped with the virtual devices disabled?
Change-Id: I7d948d6b697285e61e4352b7354b924dbf511e9a
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46020
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It is enabled by the vendor firmware.
Also drop spurious `io 0x60 = 0x00` setting. It's the default anyway
and the resource is kept disabled (it's controlled by the virtual
LDN 2e.008).
This fixes the hang in `PCI: 00:14.3 init` when doing
`outb(0, DMA1_RESET_REG)`.
Fixes: 2f8192bc ("asus/f2a85m_pro: Fix superio type in devicetree")
Change-Id: I351c93033bf2afd824eb6baa8d7625e7a33a295a
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46015
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The code for enabling ACPI timer emulation is the same for the SoCs
SKL, CNL, ICL, TGL, JSL and EHL. Deduplicate it by moving it to
common code.
APL differs in not having the delay settings. However, the bits are
marked as "spare" and BWG mentions there are no "reserved bit checks
done". Thus, we can write them unconditionally without any effect.
Note: The ACPI timer emulation can only be used by SoCs with microcode
supporting CTC (Common Timer Copy) / ACPI timer emulation.
Change-Id: Ied4b312b6d53e80e71c55f4d1ca78a8cb2799793
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45951
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Include platform.asl to link acpi methods for _INI, _WAK, and _PTS to
correctly enable backlight in OS for zork.
BUG=b:158087989
BRANCH=Zork
TEST=check backlight during reboot and suspend
Signed-off-by: Josie Nordrum <JosieNordrum@google.com>
Change-Id: I702f807a5907d85d083295cf339ba9d31b246627
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46670
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
`mrc_cache_needs_update` is comparing the "new size" of the MRC data
(minus metadata size) to the size including the metadata, which causes
the driver to think the data has changed, and so it will rewrite the
MRC cache on every boot. This patch removes the metadata size from
the comparison.
BUG=b:171513942
BRANCH=volteer
TEST=1) Memory training data gets written the on a boot where the data
was wiped out.
2) Memory training data does not get written back on every subsequent
boot.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I7280276f71fdaa492c327b2b7ade8e53e7c59f51
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Rename motherboard_fill_fadt() to the common override
mainboard_fill_fadt() function to override FADT.
Tested=On OCP Delta Lake, verify FADT PM Profile is set to
Enterprise Server.
Signed-off-by: Jingle Hsu <jingle_hsu@wiwynn.com>
Change-Id: Ie9ea7cc6e712d0aca57bbeac1a4154921d123be4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46836
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This CL fixes the policy digest that restricts deleting the nvmem spaces
to specific PCR0 states.
BRANCH=none
BUG=b:140958855
TEST=verified that nvmem spaces created with this digest can be deleted
in the intended states, and cannot be deleted in other states
(test details for ChromeOS - in BUG comments).
Change-Id: I3cb7d644fdebda71cec3ae36de1dc76387e61ea7
Signed-off-by: Andrey Pronin <apronin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46772
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
LTE module Fibocom L850-GL is lost after idle overnight,
with this workaround, host will not initiate U3 wakeup
at the same time with device, which will avoid the race condition.
If this option is set in the devicetree, the bits[7:4] in XHCI MMIO BAR +
offset 0x80A4 (PMCTRL_REG) will be updated from default 9 to 0.
BUG=b:171478764
BRANCH=octopus
TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash
the image to the device. Run following command to check if
bits[7:4] is set 0:
>iotools mmio_read32 "XHCI MMIO BAR + 0x80A4"
Change-Id: I213fed2b56f216747b2727b69f97d46d8c0c872e
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46701
Reviewed-by: Marco Chen <marcochen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The linters touch every file under src and probably util. This makes
it difficult to see what files have been accessed by the builder.
The JENKINS_SKIP_LINT_TESTS variable will only be set on the jenkins
build that looks for unused files.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I12fa31641c2a72c5e07be1c4958467f7165f21bb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46807
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Jenkins has changed the name of the build directory, so it's not
currently building out of memory, it's writing to the SSD. This
changes the build back to tmpfs.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Iefcf53757862feb2025aa5696f9f5dbce9dd70dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46803
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This tests some of the basic targets that coreboot-sdk needs to be
able to run.
I was running most of these tests manually after creating the sdk
image, but adding it into the Dockerfile makes sure they get run.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I0d4a2ad82042733a7966edb8ccf927676618977c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Because docker saves a container for every run command, by breaking
the coreboot build into 3 commands, it greatly increased the size of
the docker containers needed. When combined as one run command, the
coreboot repo that is downloaded, along with the coreboot test build
are deleted before the container is created. Since those directories
are deleted in a later run command, they don't even make it into the
final container, and just force coreboot-sdk users to download extra
data for no reason.
While splitting the build may help with debugging failures when
creating the docker container, that debugging can be done locally by
splitting up a working copy.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ia28ee4e22c0a76dc45343755c45678795308adca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46801
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Integer handling issues:
Potentially overflowing expression "1 << size_msb" with type "int"
(32 bits, signed) is evaluated using 32-bit arithmetic, and then
used in a context that expects an expression of type "uint64_t"
(64 bits, unsigned).
Fixes: CID 1435825 and 1435826
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: If859521b44d9ec3ea744c751501b75d24e3b69e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46711
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The LCM ID is not really used on Jacuzzi followers and the reference
design expects ADC to return 0. However, there were hardware design
issues so the returned value became unexpected numbers.
- Juniper and Kappa returns 1.
- Burnet and Esche returns 1 on normal boot, and 0 on recovery boot.
- Cerise and Stern usually returns 0, and sometimes 1.
To fix that, we are changing LCM ID to fixed value for Jacuzzi followers.
BUG=b:170916885,b:171365301
BRANCH=kukui
TEST=1. emerge-jacuzzi coreboot
2. check burnet/esche skuid correctly
Change-Id: I3b43b9153315ec65e9168c4e84ea844dff14d446
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46442
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
SMM does not have access to CBMEM and therefore cannot access any
persistent state like the vboot context. This makes it impossible to
query vboot state like the developer mode switch or the currently active
RW CBFS. However some code (namely the PC80 option table) does CBFS
accesses in SMM. This is currently worked around by directly using
cbfs_locate_file_in_region() with the COREBOOT region. By disabling
vboot functions explicitly in SMM, we can get rid of that and use normal
CBFS APIs in this code.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I4b1baa73681fc138771ad8384d12c0a04b605377
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46645
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Right now IGD is hard coded to 0:2.0 and if that
device is there, it is blindly used, even if it is
not a graphics device. Look at the PCI class to make
sure we're not using the wrong device.
Change-Id: Ia7f52071bd202e2960faba0f46e4fa5e14ad65f8
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46673
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This reverts commit 214c719eed.
CB:45857 overrides the GPIO PM configuration if Cr50 does not support
long interrupt pulse width. More recent Cr50 Firmware versions support
long pulse width and hence the GPIO PM can take the default
configuration.
BUG=None
TEST=Build and boot Drawlat to OS. Ensured that 200 iterations of
suspend/resume sequence, warm and cold reboot cycles each are
successful.
Change-Id: I8e3be42cd82fd3ae919d23d6f19c84a90b9c737a
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46652
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Currently sconfig generates a `static.h` to accompany
`static.c`. However, some payloads may decide they would like to consume
the FW_CONFIG macros as well. The current state of `static.h` makes this
impossible (relying on `device/device.h`).
This patch splits up `static.h` into 3 files: `static.h,
`static_devices.h`, and `static_fw_config.h`. `static.h` simply includes
the other two `.h` files to ensure no changes are needed to other
code. `static_devices.h` contains the extern'd definitions of the device
names recently introduced to sconfig. `static_fw_config.h` contains the
FW_CONFIG_FIELD_* macros only, which makes it easily consumable by a
payload which wishes to use FW_CONFIG.
Also refactor the generation of all these output files, as the code was
getting messy.
Change-Id: Ie0f4520ee055528c7be84d1d1e2dcea113ea8b5f
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
SMBIOS has a field to display the cache size, which is currently
set to UNKNOWN unconditionally, multiply the cache size of L1 and L2
by the number of cores.
TEST=Execute "dmidecode -t 7" to check if the cache information
is correct for Deltalake platform
Change-Id: Ieeb5d3346454ffb2291613dc2aa24b31d10c2e04
Signed-off-by: Morgan Jang <Morgan_Jang@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46068
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable CPU_INTEL_COMMON to make common CPU code available to CNL, which
gets used in CB:45535 and CB:45536 for CPPC entries generation.
Note: This also retrieves the VMX Kconfig and enables it by default,
like done for SKL and CNL already.
Since FSP always set the feature config lock, SET_IA32_FC_LOCK_BIT gets
selected statically by the SoC to reflect this in menuconfig.
Change-Id: I58e86021687fc0a836324f70071f7ea80242b3cb
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45826
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Check ISST (Intel SpeedShift) availability via CPUID.06H:EAX[7], instead
of relying on the devicetree option `speed_shift_enable`, that is going
to be dropped.
Test: GCPC and _CPC entries still get generated on Supermicro X11SSM-F
Change-Id: I5f9bf09385627fb6a1d8e566a80370f7ddd8605e
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46461
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The code configuring ISST (Intel SpeedShift Technology) sets the ISST
capability bits in CPUID.06H:EAX. It does *not* activate HWP (Hardware
P-States), which shall be done by the OS only.
Since the capability is enabled by default (opt-out), there is nothing
to do for us in the enabled-case. Practically speaking, there is no
value at all in disabling the capability, since one can configure the
OS to not enable HWP if that is desired.
The two other bits for EPP and HWP interrupt that were set by the code
are not set anymore, too. It was tested, on three platforms so far
(CML-U, KBL-H, SKL-U), that these are set as well by default in the
MSRs reset value (0x1cc0).
To reduce complexity and duplicated code without actual benefit, this
code gets dropped. The remaining dt option will be dropped in CB:46462.
Test: Linux on Supermicro X11SSM-F detects and enables HWP:
[ 0.415017] intel_pstate: HWP enabled
Change-Id: I952720cf1de78b00b1bf749f10e9c0acd6ecb6b7
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46460
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We limited the configurability of the debug level to stages that have
a `.data` section. This is not really a requirement, because a `.bss`
section should suffice and we always have that now.
We want to make the debug level configurable early but also want to
avoid calling get_option() early, as an error therein could result
in no console output at all. Hence, we compromise and start using
get_option() from the second console init on.
TEST=Booted QEMU once with `debug_level=Debug` and once with
`debug_level=Notice`. On the second boot, most messages
vanished for all stages but the bootblock.
Change-Id: I11484fc32dcbba8d31772bd0b82785f17b2fba11
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45765
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Asurada EC is using the large packet (256B) mode, and we were
seeing lots of timeout errors on various commands.
The AcceptTimeoutUs in EC SPI driver is hard-coded at 5000,
and that is too small for large packet running in 1M so we
should change EC SPI to the same value that kernel is using (3M).
BUG=b:161509047
TEST=emerge-asurada coreboot chromeos-bootimage; flash and boot
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Change-Id: I9c47324022129ca23ef75d0c80e215da1692636d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46394
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
MRC does not use the value of SSKPD, and will overwrite it with constant
values at the end of memory initialisation. Since coreboot does not rely
on this particular bit's value, it is safe to drop the writes to set it.
MCHBAR register 0x6120 is undocumented. It is nowhere to be found in any
documentation or code I have access to; not even for Sandy/Ivy Bridge,
the platform where this mysterious register write originally came from.
These workarounds were copied from Sandy Bridge, but do not apply to
Haswell. They were dropped on Broadwell, so drop them for Haswell too.
Tested on Asrock B85M Pro4, still boots.
Change-Id: I21d9656a7595d47ac8648c08d223b7cbafd213c3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46683
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Broadwell uses a 32-bit or, so also use it on Haswell for consistency.
This has no effect because MRC already locks the memory controller down.
Tested on Asrock B85M Pro4, still boots and register is still locked.
Change-Id: Ida69cd9a95a658c24b4d2558dde88b94c167a3f9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46681
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Haswell System Agent BIOS Spec revision 0.6.0 indicates this
register needs to be locked, and Broadwell already locks it.
Tested on Asrock B85M Pro4, still boots and register is locked.
Change-Id: Icdeb39e2fdde1403b6ab83faed214addca863f4b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46680
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This register has a lock bit. The Haswell System Agent BIOS Spec
revision 0.6.0 indicates it needs to be set, thus set it. Note that
Broadwell already locks this register.
Tested on Asrock B85M Pro4, still boots and register is locked.
Change-Id: Ie23b825e708edbfc04ec0d7783f868e8632eb608
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46679
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This register had a lock bit on Sandy Bridge, but does not on Haswell.
Moreover, the bit remains cleared on Asrock B85M Pro4 with coreboot.
Therefore, remove the write to this bit, because it has no effect.
Tested on Asrock B85M Pro4, still boots.
Change-Id: I382a6d69233ced5af069767eb61b56741ed665be
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46678
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There's no need to have ACPI guards in `gm45.h`, since the only things
the ASL files require are the base address definitions in `memmap.h`.
Also, remove the southbridge include from `gm45.h` and place it only in
the files that actually require something from it.
Tested with BUILD_TIMELESS=1, Roda RK9 remains identical.
Change-Id: Ica2c5ae9f57595c8577a1bfcc3b57f2c57b3e980
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45452
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add definitions for more DMIBAR/EPBAR registers, and specify their sizes
as well. Also, expand a comment as the registers' purpose is now known.
Tested with BUILD_TIMELESS=1, Roda RK9 does not change.
Change-Id: I9687d34e0663e70bdd2a1aa682246c2448690e18
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45448
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The host bridge PCI device ID can be changed by the firmware. There
is no documentation about it, though. There's 'official' IDs, which
appear in spec updates and Windows drivers, and 'mysterious' IDs,
which Intel doesn't want OSes to know about and thus are not listed.
The current coreboot code seems to be able to change the device ID
of the host bridge, but it seems to be missing a warm reset so that
the device ID changes. Account for the 'mysterious' device IDs in
the northbridge driver, so that booting an OS has a chance to work.
For the sake of completeness, add the PCI device IDs for Clarkdale.
Although only Arrandale is known to work, both of them are Ironlake.
It is possible that the Management Engine handles changing the PCI
device ID, which would not happen when using a broken ME firmware.
Change-Id: I93c9c47e2b0bf13d80c986c7d66b6cdf0e192b22
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45562
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
System BIOS must program some of the Root Complex Topology Capability
Structure registers located in configuration space, specs say. So do it.
Tested on Asrock B85M Pro4, still boots.
Change-Id: Ia2a61706a127bf2b817004a8ec6a723da9826aad
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43744
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enhance USB 2.0 C0/C1 A0/A1 SI by increasing the level of
"HS DC Voltage Level" and " Disconnect Threshold Adjustment" registers.
COMPDISTUNE0: 0x3->0x7
TXVREFTUNE0: 0x6->0xf
BUG=b:166398726
BRANCH=zork
TEST=1. emerge-zork coreboot
2. check U2 register is set correctly.
3. U2 SI all pass
Change-Id: I69d942605c6d43ece0d71f67df3a5e00b998219b
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46545
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Rework the code moved to common code in CB:46274. This involves
simplification by using appropriate helpers for MSR and CPUID, using
macros instead of plain values for MSRs and cpu features and adding
documentation to the header.
Change-Id: I7615fc26625c44931577216ea42f0a733b99e131
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Move a whole bunch of copy-pasta code from soc/intel/{bdw,skl,cnl,icl,
tgl,ehl,jsl,adl} and cpu/intel/{hsw,model_*} to cpu/intel/common.
This change just moves the code. Rework is done in CB:46588.
Change-Id: Ib0cc834de8492d59c423317598e1c11847a0b1ab
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46274
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The code with this error was copy-pasted from Haswell. It was fixed with
commit dab81a4 (northbridge/intel/haswell: Fix copy paste error) for
Haswell. Do the same for Broadwell. Given that LP SKUs only support one
DIMM per channel, this change makes no difference in practice.
Change-Id: I2a7bee617354870aa4334b6c0e6b49d831e64c23
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46366
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Expose the following FSP UPD interface into coreboot:
- AcousticNoiseMitigation
- FastPkgCRampDisable
- SlowSlewRateFor
BUG=b:153015585
BRANCH=none
TEST= Measure the change in noise level by changing the UPD values.
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Change-Id: I1924a3bac8beb16a9d841891696f9a3dea0d425f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45052
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
There's no need to use reg-script to do this. Since Haswell does not use
reg-script, drop it here to ease comparisons between both platforms.
Change-Id: I28323e891661758c23542c23ad9409d7fafbadf6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46525
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The MC_LOCK register was written twice and SA PM no longer has a lock
bit. Update the sequence as per the Broadwell BIOS Specification, but
keep the registers sorted by type.
Change-Id: I91cd0aa61ba6bc578c892c1a5bc973bf4c28d019
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46324
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Do not use `System Agent version` to refer to the MRC version, which is
what the register being printed contains under normal circumstances. Use
the code from Broadwell, which also happens to be indented with tabs.
Change-Id: I03b24a8e0e8676af7c5297dc3fc7bf60b9bbb088
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46371
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Commit c2ee680 (sandybridge: Use calls rather than asm to call to MRC.)
did it for Sandy Bridge, and this commit does it for Haswell.
Tested on Asrock B85M Pro4, still boots with MRC.
Change-Id: Ic915ae2a30f99805b2c87df8f9a9586a74a40c29
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46370
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Update the two load line slope settings for the SVID3 telemetry.
AGESA sends these values to the SMU, which accepts them as units
of current. Proper calibration is determined by the AMD SDLE tool
and the Stardust test.
VDD Slope: 62852 -> 62641
SOC Slope: 28022 -> 28333
BUG=b:170531252
BRANCH=zork
TEST=1. emerge-zork coreboot
2. pass AMD SDLE/Stardust test
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Change-Id: Id831907aa47be27fef2e33bb884a1118ffec14a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46655
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
RW_LEGACY region needs to be 1 MiB to accommodate any alternate
firmware. Hence update the flash ROM layout as below:
* Grab ~512 KiB from each FW_MAIN_A/B regions and allocate them to
RW_LEGACY region so that it grows to 1 MiB.
* Remove VBLOCK_DEV region which is not used.
* Re-size the ELOG region to 4 KiB since that is the maximum size of the
ELOG mirror buffer.
* Resize RW_NVRAM, VBLOCK_A/B regions to 8 KiB since no more than that
size is used in those regions.
* Resize SHARED_DATA region to 4 KiB since no more than that size is
used in that region.
* Based on the resizing, allocate each FW_MAIN_A/B regions with 72 KiB.
BUG=b:167943992, b:167498108
TEST=Build and boot to OS in Drawlat. Ensure that the firmware test
setup and flash map test are successful. Ensure that the event logs are
synced properly between reboots. Ensure that the suspend/resume sequence
is working fine. Ensure that the ChromeOS firmware update completes
successfully for the boot image with updated flash map and the system
boots fine after the update.
Change-Id: I53ada5ac3bd73bea50f4dd4dd352556f1eda7838
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46569
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable caching of memory training data for recovery as well as normal
mode because memory training is taking too long in recovery as well.
This required creating a space in the fmap for RECOVERY_MRC_CACHE.
BUG=b:150502246
BRANCH=None
TEST=Run power_state:rec twice on lazor. Ensure that on first boot,
memory training occurs and on second boot, memory training is
skipped.
Change-Id: Id9059a8edd7527b0fe6cdc0447920d5ecbdf296e
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46651
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Mediatek SoC uses part of the L2 cache as SRAM before DRAM is ready.
After DRAM is ready, we should invoke disable_l2c_sram to reconfigure
the L2C SRAM as L2 cache.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Change-Id: Icaf80bd9da3e082405ba66ef05dd5ea9185784a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46387
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If necessary, SCLEAN needs to run in early romstage, where DRAM is not
working yet. In fact, that the DRAM isn't working is the reason to run
SCLEAN in the first place. Before running GETSEC, CAR needs to be torn
down, as MTRRs have to be reprogrammed to cache the BIOS ACM. Further,
running SCLEAN leaves the system in an undefined state, where the only
sane thing to do is reset the platform. Thus, invoking SCLEAN requires
specific assembly prologue and epilogue sections before and after MTRR
setup, and neither DRAM nor CAR may be relied upon for the MTRR setup.
In order to handle this without duplicating the MTRR setup code, place
it in a macro on a separate file. This needs to be a macro because the
call and return instructions rely on the stack being usable, and it is
not the case for SCLEAN. The MTRR code clobbers many registers, but no
other choice remains when the registers cannot be saved anywhere else.
Tested on Asrock B85M Pro4, BIOS ACM can still be launched.
Change-Id: I2f5e82f57b458ca1637790ddc1ddc14bba68ac49
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46603
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The MRC will perform PCI enumeration, and if it detects a VGA device in
a PEG slot, it will disable the IGD and not reserve any memory for it.
Since the memory map is locked by the time MRC finishes, the IGD can not
be enabled afterwards. Changing this behavior requires patching the MRC.
Hiding the PEG devices from MRC allows the IGD to be used even when a
dedicated graphics card is present. However, MRC will not program the
PEG AFE settings as it should, which can cause stability problems at
higher PCIe link speeds. Thus, restrict this workaround to only run when
the HASWELL_HIDE_PEG_FROM_MRC option is enabled. This allows the IGD to
be disabled and the PEG AFE settings to be programmed when a dedicated
graphics card is to be enabled, which results in increased stability.
The most ideal way to fix this problem for good is to implement native
platform init. Native init is necessary to make Nvidia Optimus usable.
Tested on Asrock B85M Pro4, using the PEG slot with a dedicated graphics
card as well as without. Graphics in both situations function properly.
Change-Id: I4d825b1c41d8705bfafe28d8ecb0a511788901f0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45534
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
LockConfig only exists on Intel TXT for Servers. Check whether this is
supported using GETSEC[PARAMETERS]. This eliminates a spurious error for
Client TXT platforms such as Haswell, and is a no-op on TXT for Servers.
Change-Id: Ibb7b0eeba1489dc522d06ab27eafcaa0248b7083
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
When Boot Guard is disabled or not available, the IBB might not even
exist. This is the case on traditional (non-ULT) Haswell, for example.
Leave the S3 resume check as-is for now. Skylake and newer may need to
run SCHECK on resume as well, but I lack the hardware to test this on.
Change-Id: I70231f60d4d4c5bc8ee0fcbb0651896256fdd391
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This is merely used to test whether the BIOS ACM calling code is working
properly. There's no need to do this on production platforms. Testing on
Haswell showed that running this NOP function breaks S3 resume with TXT.
Add a Kconfig bool to control whether the NOP function is to be invoked.
Change-Id: Ibf461c18a96f1add7867e1320726fadec65b7184
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Heap initialization is self-contained, so place it into a separate
function. Also, do it after the MSEG registers have been written, so
that all register writes are grouped together. This has no impact.
Change-Id: Id108f4cfcd2896d881d9ba267888f7ed5dd984fa
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The TXT_BIOSACM_ERRORCODE register is only valid if TXT_SPAD bit 62 is
set, or if CBnT is supported and bit 61 is set. Moreover, this is only
applicable to LT-SX (i.e. platforms supporting Intel TXT for Servers).
This allows TXT to work on client platforms, where these registers are
regular scratchpads and are not necessarily written to by the BIOS ACM.
Change-Id: If047ad79f12de5e0f34227198ee742b9e2b5eb54
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46492
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This config selects the necessary options to enable Intel TXT on the
Asrock B85M Pro4, and allows the code to be build-tested. Note that the
current TXT code will not work, as it was written for Broadwell-DE.
Subsequent commits will adapt the code as necessary to work on Haswell.
Compatible BIOS and SINIT ACMs can be retrieved from a firmware update
for the Supermicro X10SLH. As they are not in the blobs repository, use
the STM binary as a placeholder so as to allow build-testing the code.
Change-Id: Ibf8db5fdfac5b527520023277c6370f6efa71717
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46489
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SMMSTORE version 2 is a complete redesign of the current driver. It is
not backwards-compatible with version 1, and only one version can be
used at a time.
Key features:
* Uses a fixed communication buffer instead of writing to arbitrary
memory addresses provided by untrusted ring0 code.
* Gives the caller full control over the used data format.
* Splits the store into smaller chunks to allow fault tolerant updates.
* Doesn't provide feedback about the actual read/written bytes, just
returns error or success in registers.
* Returns an error if the requested operation would overflow the
communication buffer.
Separate the SMMSTORE into 64 KiB blocks that can individually be
read/written/erased. To be used by payloads that implement a
FaultTolerant Variable store like TianoCore.
The implementation has been tested against EDK2 master.
An example EDK2 implementation can be found here:
eb1127744a
Change-Id: I25e49d184135710f3e6dd1ad3bed95de950fe057
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40520
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Create the metaknight variant of the waddledee reference board by
copying the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.2.0).
BUG=b:169813211
BRANCH=None
TEST=util/abuild/abuild -p none -t google/dedede -x -a
make sure the build includes GOOGLE_METAKNIGHT
Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Change-Id: Ia2e473eb1d0a2c819b874e497de0823fca75645a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Since MRC_SAVE_HASH_IN_TPM depends on TPM2, we can now remove the tpm
1.2 versions of functions that deal with mrc hash in the tpm as it
will not be used by tpm 1.2 boards. Also move all antirollback
functions that deal with mrc hash in the tpm under CONFIG(TPM2).
BUG=b:150502246
BRANCH=None
TEST=make sure boards are still compiling on coreboot Jenkins
Change-Id: I446dde36ce2233fc40687892da1fb515ce35b82b
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46615
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
To enable DVFS, DRAM driver needs to access four different
regulators that SoC can't access directly and need board-specific
implementations.
To support that we need to define the getter and setter APIs for
those regulators.
BUG=b:147789962
BRANCH=none
TEST=verified with DRAM driver
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Change-Id: I0c2d471a7f8628735af90c5b5a5ab3012831e442
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46405
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The 'struct acpi_gpio' arguments passed to acpigen functions are
not modified so they can be made const, which allows drivers to
also use a const pointer.
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I59e9c19e7bfdca275230776497767ddc7f6c52db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46257
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add an option for unused/reserved bits in a Field definition,
allowing for declarations that do not start at bit 0:
Field (UART, AnyAcc, NoLock, Preserve)
{
, 7, /* RESERVED */
BITF, /* Used bit */
}
These just use byte 0 instead of a name.
Change-Id: I86b54685dbdebacb0834173857c9341ea9fa9a46
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46254
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With TGL FSP v3373 onwards vbt binary size changed from 8KiB
to 9KiB. Due to which cbfsf_decompression_info check failed
when trying to load vbt binary from cbfs because vbt
decompressed_size was greater than vbt_data size. This caused
Graphics init and fw screen issues. Increase the vbt_data to
9KiB to accommodate new vbt binary.
BUG=b:170656067
BRANCH=none
TEST=build and boot delbin and verify fw screen is loaded
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: If6ffce028f9e8bc14596bbc0a3f1476843a9334e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dossym Nurmukhanov <dossym@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This driver is for the root port device and needs to reference the
parent device for its ACPI scope. Similarly for the debug output it
needs to use the parent device, and fall back to the chip name if
config->desc is not provided in the devicetree.
The UID property is removed. This value is not the same as the port
number; according to some docs it should be unique but it is not fully
clear what it should be tied to. Regardless, it is not used by the
Thunderbolt driver in the kernel.
I also renamed some functions/structures to be clear that this is just
an ACPI driver for the PCIe root port and not a driver for the root port
itself. As part of this I removed the PCI based resource operations and
the scan bus function since this device does not have children itself.
Finally I added a detailed comment with an example describing what the
driver is for and what properties it generates.
TEST=boot on volteer and ensure the USB4 root port device and properties
are added to the SSDT as described by the comment in chip.h.
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: Id6069a0fb7a0fc6836ddff1dbeca5915e444ee18
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46544
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The USB4 host interface (DMA) devices need to use SA_DEVFN_*
instead of SA_DEV_* when determining the ACPI name.
The matching names are removed from the SOC-level ACPI name
handler since they are provided by this driver now.
TEST=boot on volteer and ensure TDM0 device is in the SSDT.
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: If778bda82b80593452a590962dbffef6eff6484a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This change allows a generic device to be described in the devicetree
under a PCI device, such as a root port.
Previously any device under a PCI device was expected to also be a PCI
device and that does not allow for a virtual/generic device to be
present, for example to provide ACPI properties for a root port.
The changes are:
- Ignore non-PCI devices found under a PCI device when scanning and do
not print an error for each devfn scanned.
- Don't treat non-PCI devices as leftover and remove them, instead
enable them as a static device.
- Don't attempt to configure a static device in the tree that is not a
PCIe device type.
With these changes it is now possible to have a generic device under a
PCI device, for example in a USB4/TBT root port (PCIe hotplug device)
this generic device will add ACPI properties for the PCIe tunnel routed
to the external port:
device pci 07.0 on
chip soc/intel/common/block/pcie
device generic 0 on end
end
end
TEST=boot on volteer with the USB4 root port devices in chipset.cb and
ensure they are enabled properly and there are no errors printed in the
coreboot log, and that the device properties are created in the SSDT.
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I56a491808067dc862a7adfd46852f0bd6b41cd95
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46542
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The work done by enable_static_devices() and scan_generic_bus()
is common and can be used by other device handlers to enable a
single static device.
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: Ibfde9c4eb794714ebd9800e52b91169ceba15266
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46541
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The 0x30 register is eventually controlled by coreboot's
pnp_enable_resources() based on the on/off setting. Other
register settings were grouped with their respective "virtual"
LDN, where possible.
Note, this temporarily breaks LDN 8 settings, as coreboot will
ignore configuration for disabled devices.
Change-Id: I8585dd08eed407ab12258f2accaa63dab294e7d8
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The `io` statement will prepare a 16-bit write, hence use `irq` for
miscellaneous 8-bit registers and fix actual `io` settings (i.e. merge
0x61 writes into 0x60). Note, using `irq` is still just a hack as these
are neither I/O nor IRQs, but it's common practice in coreboot.
Change-Id: I2e1c2286be726d126598cc4a97bb15a57faef42f
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46013
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The mainboard has a PS/2 port, so enable the keyboard controller in the
devicetree.
The PS/2 keyboard now works in SeaBIOS payload, but not in GNU/Linux,
probably as ACPI code still needs to be added.
Change-Id: I7846633bc1a3bdf6bffae628e0542bb8fb684804
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45998
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Enhance USB 2.0 SI by increasing the level of "HS DC Voltage Level"
and "Disconnect Threshold Adjustment".
COMPDISTUNE0: 0x3->0x7
TXVREFTUNE0: 0x6->0xf
BUG=b:162614573
BRANCH=zork
TEST=1. emerge-zork coreboot
2. check U2 registers are set correctly
3. test with servo v4 type-c, it's working expectedly.
4. U2 SI pass
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Change-Id: I278cc0aaddbc9fce595bf57ca69ee8abfc9f5659
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46537
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Correct the two load line slope settings for the SVID3 telemetry.
AGESA sends these values to the SMU, which accepts them as units
of current. Proper calibration is determined by the AMD SDLE tool
and the Stardust test.
BUG=b:168265881
BRANCH=zork
TEST=emerge-zork coreboot
Change-Id: Id6c4f1a92d7f2ad293df7b63694e9665b85f8018
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46472
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Early JSL silicon hang while booting Linux with ISST enabled. The
malfunctioning silicon revisions have been used only for development
purposes and have been phased out. Thus, drop the ISST workaround.
Change-Id: Ic335c0bf03a5b07130f79c24107a1b1b0ae75611
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46459
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Currently, the serial console does not work.
With the serial port enabled in the vendor firmware, `superiotool` outputs
the global control register values below.
Found Nuvoton NCT6779D (id=0xc562) at 0x2e
Register dump:
idx 10 11 13 14 1a 1b 1c 1d 20 21 22 24 25 26 27 28 2a 2b 2c 2f
val ff ff ff ff 3a 28 00 10 c5 62 df 04 00 00 10 00 48 20 00 01
def ff ff 00 00 30 70 10 00 c5 62 ff 04 00 MM 00 00 c0 00 01 MM
UART A needs to be enabled in CR 0x2a by clearing bit 7. Do this by
selecting the Super I/O Kconfig symbol `SUPERIO_NUVOTON_COMMON_COM_A`.
This changes the default value 0xc0 to 0x40.
Note, due configuring the system as legacy free with
`HUDSON_LEGACY_FREE=y`, AGESA in romstage disables the LPC controller in
`FchInitResetLpcProgram()`.
coreboot-4.12-3417-g192b9576fe Tue Oct 20 09:15:53 UTC 2020 romstage starting (log level: 7)...
APIC 00: CPU Family_Model = 00610f31
APIC 00: ** Enter AmdInitReset [00020007]
Fch OEM config in INIT RESET
`AmdInitReset() returned AGESA_SUCCESS` is not transmitted anymore. Only
when coreboot enables the LPC controller again in ramstage, serial output
continues.
PCI: 00:14.4 bridge ctrl <- 0013
PCI: 00:14.4 cmd <- 00
PCI: 00:14.5 cmd <- 02
PCI: 00:15.0 bridge ctrl <- 0013
PCI: 00:15.0 cmd <- 00
PCI: 00:15.1 bridge ctrl <- 0013
[…]
done.
BS: BS_DEV_ENABLE run times (exec / console): 0 / 30 ms
Initializing devices...
CPU_CLUSTER: 0 init
[…]
Note, due to incorrect Super I/O configuration in the devicetree, the boot
hangs in `PCI: 00:14.3 init` when doing `outb(0, DMA1_RESET_REG)`. This
will be fixed in follow-up commits.
TEST=Receive (some) coreboot log messages over the serial console.
Change-Id: I0aa367316f274ed0dd5964ba5ed045b9aeaccf8d
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39371
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Add a Kconfig for SoCs to indicate PM ACPI timer emulation support and
select it by the appropriate SoCs.
This Kconfig gets used in the follow-up changes.
Change-Id: I6ded79221a01655f298ff92b8bd2afabd1d2a3ff
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46017
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
When MRC_SAVE_HASH_IN_TPM is selected, we can just use the TPM hash to
verify the MRC_CACHE data. Thus, we don't need to calculate the
checksum anymore in this case.
BUG=b:150502246
BRANCH=None
TEST=make sure memory training still works on nami
Change-Id: I1db4469da49755805b541f50c7ef2f9cdb749425
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Pull selection of tpm hash index logic into cache_region struct. This
CL also enables the storing of the MRC hash into the TPM NVRAM space
for both recovery and non-recovery cases. This will affect all
platforms with TPM2 enabled and use the MRC_CACHE driver.
BUG=b:150502246
BRANCH=None
TEST=make sure memory training still works on nami and lazor
Change-Id: I1a744d6f40f062ca3aab6157b3747e6c1f6977f9
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46514
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add new index for MRC_CACHE data in RW. Also update antirollback
functions to handle this new index where necessary.
BUG=b:150502246
BRANCH=None
TEST=make sure memory training still works on nami
Change-Id: I2de3c23aa56d3b576ca54dbd85c75e5b80199560
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46511
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
We need to extend the functionality of the mrc_cache hash functions to
work for both recovery and normal mrc_cache data. Updating the API of
these functions to pass in an index to identify the hash indices for
recovery and normal mode.
BUG=b:150502246
BRANCH=None
TEST=make sure memory training still works on nami
Change-Id: I9c0bb25eafc731ca9c7a95113ab940f55997fc0f
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46432
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This CL would remove these calls from fsp 2.0. Platforms that select
MRC_STASH_TO_CBMEM, updating the TPM NVRAM space is moved from
romstage (when data stashed to CBMEM) to ramstage (when data is
written back to SPI flash.
BUG=b:150502246
BRANCH=None
TEST=make sure memory training still works on nami
Change-Id: I3088ca6927c7dbc65386c13e868afa0462086937
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Use this config to specify whether we want to save a hash of the
MRC_CACHE in the TPM NVRAM space. Replace all uses of
FSP2_0_USES_TPM_MRC_HASH with MRC_SAVE_HASH_IN_TPM and remove the
FSP2_0_USES_TPM_MRC_HASH config. Note that TPM1 platforms will not
select MRC_SAVE_HASH_IN_TPM as none of them use FSP2.0 and have
recovery MRC_CACHE.
BUG=b:150502246
BRANCH=None
TEST=emerge-nami coreboot chromeos-bootimage
Change-Id: Ic5ffcdba27cb1f09c39c3835029c8d9cc3453af1
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46509
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
On DeltaLake server, there are following entry in MTRR address space:
0x0000201000000000 - 0x0000201000400000 size 0x00400000 type 0
In this case, the base address (with 4k granularity) cannot be held in
uint32_t. This results incorrect MTRR register setup. As the consequence
UEFI forum FWTS reports following critical error:
Memory range 0x100000000 to 0x183fffffff (System RAM) has incorrect attribute Uncached.
Change appropriate variables' data type from uint32_t to uint64_t.
Add fls64() to find least significant bit set in a 64-bit word.
Add fms64() to find most significant bit set in a 64-bit word.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Change-Id: I41bc5befcc1374c838c91b9f7c5279ea76dd67c7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46435
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The PCI bus gets already scanned while gathering system information.
Therefore, use the pacc pointer from sysinfo_t to read the device class
of PCI devices instead of rescanning the bus.
Change-Id: I4c79e71777e718f5065107ebf780ca9fdb4f1b0c
Signed-off-by: Felix Singer <felix.singer@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Currently, the PCI bus gets scanned multiple times for various reasons
(e.g. to read the device class). Therefore, and in preparation to
CB:46416, introduce the pacc pointer in the sysinfo_t struct and scan
the PCI bus while gathering system information.
Change-Id: I496c5a3d78c7fb5d7c9f119a0c9a0314d54e729f
Signed-off-by: Felix Singer <felix.singer@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46348
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The 3 commits commits from the blob repository this patch pulls in
remove executable flags from files in the repo that shouldn't have those
flags set:
* pi/amd/00660F01/FP4/AGESA.bin: Remove execute file mode bit
* Remove execute permission from all binaries
* Remove execute permission from plaintext files
Change-Id: I9c2b7c69f07e46bac466bfbfb277595c9fbc5a5a
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46554
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
MSR_FEATURE_CONFIG, which is used for locking AES-NI, is core-scoped,
not package-scoped. Thus, move locking from SMM to core init, where the
code gets executed once per core.
Change-Id: I3a6f7fc95ce226ce4246b65070726087eb9d689c
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The Picasso build describes the DRAM region where the PSP places
our bootblock. Rather than relying on Kconfig values, make the build
more robust by using the actual size and target base address
from the boot block's ELF file.
Sample output of "readelf -l bootblock.elf" is:
------------------
Elf file type is EXEC (Executable file)
Entry point 0x203fff0
There is 1 program header, starting at offset 52
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x001000 0x02030000 0x02030000 0x10000 0x10000 RWE 0x1000
Section to Segment mapping:
Segment Sections...
00 .text .data .bss .reset
------------------
We can extract the information from here.
BUG=b:154957411
TEST=Build & boot on mandolin
Change-Id: I5a26047726f897c57325387cb304fddbc73f6504
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46092
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Lock AES-NI (MSR_FEATURE_CONFIG) to prevent unintended changes of
AES-NI enablement as precaution, as suggested in Intel document
325384-070US.
Locking is enabled by default (as already done in SKL and Arrandale) and
may be disabled by the newly introduced Kconfig in the parent change.
Tested by checking the MSR.
Change-Id: I79495bfbd3ebf3b712ce9ecf2040cecfd954178d
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46273
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Copy the AES-NI locking function to common cpu code to be able to reuse
it.
This change only copies the code and adds the MSR header file. Any
further rework and later deduplication on the platforms code is done in
the follow-up changes.
Change-Id: I81ad5c0d4797b139435c57d3af0a95db94a5c15e
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46272
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Correct the base address. This should have no noticeable effect,
as SMC_MSG_S3ENTRY accepts no arguments and doesn't return. The
argument writes were not getting to any target.
BUG=b:171037051
TEST=Run SST on morphius
BRANCH=Zork
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ie3402f743cf7d4f4f42b8afa3e8b253be4761949
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46505
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The Chili base board is a ruggedized laptop with additional industrial
interfaces. So far, only booting and basic interfaces (USB, UART,
Video) are working with the original model, the "base" variant.
No further development is planned for this variant, as our primary
target was another one that will be added in a follow-up.
Change-Id: I1d3508b615ec877edc8db756e9ad38132b37219c
Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.com>
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Signed-off-by: Felix Singer <felix.singer@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39976
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The XTAL shutdown (dis)qualification bit already unconditionally gets
set to 1 by FSP for these platforms, making this code redundant.
Change-Id: I7fa4afb0de2af1814e5b91c152d82d7ead310338
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46016
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There's no need to have multiple Kconfig symbols which do the same
thing. Introduce `SUPERIO_NUVOTON_COMMON_COM_A` and update boards to use
the new symbol. To preserve alphabetical order in mainboard Kconfig,
place the new symbol above the Super I/O symbol (instead of below).
Change-Id: Ic0a30b3177a1a535261525638be301ae07c59c14
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46522
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
No recent Chromebooks have used I2C for TPM communication, and as a
result, a bug has crept in. The ability to extract Cr50 firmware string
is only supported via SPI, yet code in mainboard and vendorcode attempt
to do so unconditionally.
This CL makes it such that the code also compiles for future designs
using I2C. (Whether we want to enhance the I2C protocol to be able to
provide the version string, and then implement the support is a separate
question.)
This effort is prompted by the desire to use reworked Volteer EVT
devices for validating the new Ti50/Dauntless TPM. Dauntless will
primarily be using I2C in upcoming designs.
BRANCH=volteer
TEST=util/abuild/abuild -t GOOGLE_VOLTEER -c max -x
Change-Id: Ida1d732e486b19bdff6d95062a3ac1a7c4b58b45
Signed-off-by: jbk@chromium.org
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46436
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
As ongoing work for generalizing mrc_cache to be used by all
platforms, we are pulling it out from fsp 2.0 and renaming it as
mrc_cache_hash_tpm.h in security/vboot.
BUG=b:150502246
BRANCH=None
TEST=emerge-nami coreboot chromeos-bootimage
Change-Id: I5a204bc3342a3462f177c3ed6b8443e31816091c
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46508
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The subsystem ID registers are read/write-once. Writes by coreboot will
not take effect if FSP sets them.
Note that FSP sets one device ID for the SA devices and another for PCH
devices. coreboot will copy individual vendor and device IDs if
subsystem is not provided.
Change-Id: I9157fb69f2a49dfc08f049da4b39fbf86614ace3
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45006
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Coverity detects source memory is overrun. Fix this issue by using
the CONFIG_MAX_ROOT_PORTS value to avoid memory corruption.
Found-by: Coverity CID 1429762 1429774
TEST=None
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Icc253eb9348d959a9e9e69a3f13933b7f97d6ecc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46504
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The camera sensor component chosen for UFC and WFC have an address
conflict. Resolve it by enabling GPIO based I2C Multiplexer. Also
configure the GPIO that is used as select line.
BUG=b:169444894
TEST=Build and boot waddledee to OS. Ensure that the ACPI identifiers
are added for I2C devices multiplexed using I2C MUX under the
appropriate scope.
Change-Id: I9b09e063b4377587019ade9e6e194f4aadcdd312
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45912
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This chip driver adds ACPI identifiers for multiplexed I2C bus that are
selected using GPIO. The multiplexed bus device defines the address
to select the I2C lines. These ACPI identifiers are consumed by the
i2c-mux-gpio kernel driver:
https://www.kernel.org/doc/html/latest/i2c/muxes/i2c-mux-gpio.html
BUG=b:169444894
TEST=Build and boot to OS in waddledee. Ensure that the ACPI identifiers
are added in appropriate context.
Scope (\_SB.PCI0.I2C3.MUX0)
{
Device (MXA0)
{
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
Name (_ADR, Zero) // _ADR: Address
}
}
Scope (\_SB.PCI0.I2C3.MUX0)
{
Device (MXA1)
{
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
Name (_ADR, One) // _ADR: Address
}
}
Change-Id: If8b983bc8ce212ce05fe6b7f01a6d9092468e582
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add identifiers in ACPI tables for GPIO based I2C multiplexer. The
multiplexer device defines the GPIO resource used to select the
adapter/bus lines. The multiplexer adapter device defines the address
to select the adapter/client lines. These ACPI identifiers are consumed
by the i2c-mux-gpio kernel driver:
https://www.kernel.org/doc/html/latest/i2c/muxes/i2c-mux-gpio.html
BUG=b:169444894
TEST=Build and boot waddledee to OS. Ensure that the ACPI identifiers
are added for I2C devices multiplexed using I2C MUX under the
appropriate scope. Here is the output SSDT:
Scope (\_SB.PCI0.I2C3)
{
Device (MUX0)
{
Name (_HID, "PRP0001") // _HID: Hardware ID
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
"\\_SB.PCI0.GPIO", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0125
}
})
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */,
Package (0x02)
{
Package (0x02)
{
"compatible",
"i2c-mux-gpio"
},
Package (0x02)
{
"mux-gpios",
Package (0x04)
{
\_SB.PCI0.I2C3.MUX0,
Zero,
Zero,
Zero
}
}
}
})
}
}
Change-Id: Ib371108cc6043c133681066bf7bf4b2e00771e8b
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45911
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Make IMD private structures definitions accessible by other units.
To test IMD API correctness there is a need to access its internal
structure. It is only possible when private implementation is visible
in testing scope.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: Iff87cc1990426bee6ac3cc1dfa6f85a787334976
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46216
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Replace vb2ex_hwcrypto_rsa_verify_digest with vb2ex_hwcrypto_modexp.
Instead of using hardware acceleration for whole RSA process,
acclerating only calculation part(modexp) increases transparency
without affecting boot time.
BUG=b:169157796
BRANCH=zork
TEST=build and flash, check time spent on RSA is not changed
Change-Id: I085f043bf2014615d2c9db6df0b7947ee84b9546
Signed-off-by: Kangheui Won <khwon@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45987
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The USB4 retimer device needs to declare a _DSM with specific functions
that allow for GPIO control to turn off the power when an external
device is not connected. This driver allows the mainboard to provide
the GPIO that is connected to the power control.
BUG=b:156957424
Change-Id: Icfb85dc3c0885d828aba3855a66109043250ab86
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44918
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To support camera second source GC5035 for kodama, add world facing
camera id as part of the sku id, which is determined by the data in
camera EEPROM. For models other than kodama, the camera id is always 0
and hence the sku id is unchanged.
BUG=b:144820097
TEST=emerge-kukui coreboot
TEST=Correct WFC id detected for kodama with GC5035 camera
BRANCH=kukui
Change-Id: I63a2b952b8c35c0ead8200d7c926e8d90a9f3fb8
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45811
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The device class is read at different places and it is read from the
hardware directly. Therefore, and in preparation to CB:46416, introduce
the device class attribute in the pci_dev struct. With this, there is
only one interaction with the hardware and it's also more user friendly.
Change-Id: I5d56be96f3f0da471246f031ea619e3df8e54cfb
Signed-off-by: Felix Singer <felix.singer@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46347
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
A newline is missing at the end of the informational message.
PNP: 002e.5 init
nct5572d_init: Disable mouse controller.PNP: 002e.5 init finished in 0 msecs
PNP: 002e.307 init
Change-Id: Ic73ed97be0993637be1e97040784d5a8e70a22ae
Fixes: 6ff1078990 ("superio: Log if mouse controller is disabled")
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45805
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The passive clause is constructed with the past participle, which is
*defined* in this case. Fix all occurrences in AMD vendor code with the
command below.
git grep -l "is define at" src/mainboard/ | xargs sed -i 's/is define at/is defined at/'
Change-Id: I5aa0e6e064410b305aa5f2775271f6a8988da64b
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46066
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The passive clause is constructed with the past participle, which is
*defined* in this case. Fix all occurrences in AMD vendor code with the
command below.
$ git grep -l "is define at" src/vendorcode/amd/ | xargs sed -i 's/is define at/is defined at/'
Change-Id: Ia26c87aecb484dcb55737e417367757d38ce3b56
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46065
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
With a tabulator length of eight spaces, the alignment is the same, but
the other macro definitions are using a space, so do the same for
consistency, better alignment in diff views.
git grep -l -P 'define\tBLD' | xargs sed -i 's,define\tBLD,define BLD,g'
Change-Id: Ib71057c84dc897028cb0ceac29952e67bc541d2e
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46518
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Currently, when selecting SUPERIO_NUVOTON_NCT*_COM_A, the whole global
control register 0x2a is written to 0x40. CR 0x2a defaults to 0xc0, so
indeed bit 7 is cleared, but the device early init code might have set
other bits in that control register, so setting it to 0x40 might
override already set bits. So, only clear bit 7 and leave the other bits
untouched.
Fixes: f95daa510d ("superio/nuvoton: Add back Nuvoton NCT6776 support")
Change-Id: I9ded9dab3985c4c8e5c45af354ef44af482e18c2
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46286
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Due to platform-specific constraints, it is not possible to enable DPR
by programming the MCH's DPR register in ramstage. Instead, assume it
has been programmed earlier and check that its value is valid. If it is,
then simply configure DPR in TXT public base with the same parameters.
Note that some bits only exist on MCH DPR, and thus need to be cleared.
Implement this function on most client platforms. For Skylake and newer,
place it in common System Agent code. Also implement it for Haswell, for
which the rest of Intel TXT support will be added in subsequent commits.
Do not error out if DPR is larger than expected. On some platforms, such
as Haswell, MRC decides the size of DPR, and cannot be changed easily.
Reimplementing MRC is easier than working around its limitations anyway.
Change-Id: I391383fb03bd6636063964ff249c75028e0644cf
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46490
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The BIOS ACM will check that enabled variable MTRRs do not cover more
than the ACM's size, rounded up to 4 KiB. If that is not the case,
launching the ACM will result in a lovely TXT reset. How boring.
The new algorithm simply performs a reverse bit scan in a loop, and
allocates one MTRR for each set bit in the rounded-up size to cache.
Before allocating anything, it checks if there are enough variable
MTRRs; if not, it will refuse to cache anything. This will result in
another TXT reset, initiated by the processor, with error type 5:
Load memory type error in Authenticated Code Execution Area.
This can only happen if the ACM has specific caching requirements that
the current code does not know about, or something has been compromised.
Therefore, causing a TXT reset should be a reasonable enough approach.
Also, disable all MTRRs before clearing the variable MTRRs and only
enable them again once they have been set up with the new values.
Tested on Asrock B85M Pro4 with a BIOS ACM whose size is 101504 bytes.
Without this patch, launching the ACM would result in a TXT reset. This
no longer happens when this patch is applied.
Change-Id: I8d411f6450928357544be20250262c2005d1e75d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44880
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When caching the BIOS ACM, one must cache less than a page (4 KiB) of
unused memory past the end of the BIOS ACM. Failure to do so on Haswell
will result in a lovely TXT reset with Class Code 5, Major Error Code 2.
The current approach uses a single variable MTRR to cache the whole BIOS
ACM. Before fighting with the variable MTRRs in assembly code, ensure
that enough variable MTRRs exist to cache the BIOS ACM's size. Since the
code checks that the ACM base is aligned to its size, each `one` bit in
the ACM size will require one variable MTRR to properly cache the ACM.
One of the several BIOS ACMs for Haswell has a size of 101504 bytes.
This is 0x18c80 in hexadecimal, and 0001 1000 1100 1000 0000 in binary.
After aligning up the BIOS ACM size to a page boundary, the resulting
size is 0x19000 in hexadecimal, and 0001 1001 0000 0000 0000 in binary.
To successfully invoke said ACM, its base must be a multiple of 0x20000
and three variable MTRRs must be used to cache the ACM. The MTRR ranges
must be contiguous and cover 0x10000, 0x8000, 0x1000 bytes, in order.
The assembly code is updated in a follow-up, and relies on these checks.
Change-Id: I480dc3e4a9e4a59fbb73d571fd62b0257abc65b3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46422
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds some Kconfig hints to make it clearer that the
USE_QC_BLOBS option is required for SC7180 boards and guide the user in
the right direction through menuconfig. Also add those little arrows to
the Trogdor board options that are there on most other boards.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I973cae8026a229408a1a1817c4808b0266387ea7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45214
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philip Chen <philipchen@google.com>
msr_set_bit can only set single bits in MSRs and causes mixing of bit
positions and bitmasks in the MSR header files. Thus, replace the helper
by versions which can unset and set whole MSR bitmasks, just like the
"and-or"-helper, but in the way commit 64a6b6c was done (inversion done
in the helper). This helps keeping the MSR macros unified in bitmask
style.
In sum, the three helpers msr_set, msr_unset and msr_unset_and_set get
added.
The few uses of msr_set_bit have been replaced by the new version, while
the used macros have been converted accordingly.
Change-Id: Idfe9b66e7cfe78ec295a44a2a193f530349f7689
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46354
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fix DSM function 0 (query function) to correctly report function support
for its revision. Revision 1 should return 0x3 because I2C HID supports
only 1 additional function. All other revisions should return 0.
BUG=b:170862147
BRANCH=Zork
TEST=ensure no dmesg errors; disassemble and verify SSDT
Signed-off-by: Josie Nordrum <JosieNordrum@google.com>
Change-Id: Iee082ef5cf44c4cf7ab304345af56f3b5173ca56
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46429
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
TEST=Build and test booting ADL RVP form NVMe and Optane
localhost ~ # lspci -d :f1a6
Show all the NVMe devices and be really verbose
localhost ~ # lspci -vvvd :f1a6
Print PCIe lane capabilities and configurations for all the NVMe devices.
Change-Id: I0a04b23b17df574d4fa3bae233ca40cd3b104201
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
A regular M.2 NVMe SSD shows up on RP9 and runs at x4 width.
Optane memory module shows up as 2 NVMe devices in x2 config:
- NVMe storage device uses RP9
- NVMe Optane memory uses RP11
Note: These two devices are sharing CLK PINs because of same M.2 slot.
TEST=Build and boot ADL RVP board using Intel Optane card.
Change-Id: Ia21d7d2fd07c4fb32291af7bb5a2e41e40316278
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This change copies ec_commands.h from Chromium OS EC repo at 7b6cb69db.
The change also drops unneeded empty lines and coverts license header
to SPDX style.
BUG=b:147789962
BRANCH=none
TEST=emerge-asurada coreboot
Change-Id: I9816dab5edb418e76896355a0802c59307c664c4
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46403
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
This needs to be saved and restored, otherwise the BSP might have an
inconsistent MTRR setup with regards to the AP's which results in
weird errors and slowdowns in the operating system.
TESTED: Fixes booting OCP/Deltalake with Linux 5.8.
Change-Id: Iace636ec6fca3b4d7b2856f0f054947c5b3bc8de
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46375
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
While MRC.bin does not allocate any memory for DPR by default, it can be
patched to do so. However, the current northbridge code does not account
for DPR and will, among other things, place CBMEM inside it. Even though
this may seem like a good thing, it renders TianoCore unable to boot and
clashes with Intel TXT support (the reason to enable DPR to begin with).
Update memmap.c so that CBMEM top does not fall within DPR. Also, report
DPR as reserved, so that OSes know that the DPR memory is not to be used.
Change-Id: I11f23fd43188f987e35fd61f52587e567496cd78
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45712
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
HybridStorageMode FSP UPD needs to be set only for optane storage.
Enabling HybridStorageMode causes some extra delay in FspSiliconInit due
to HECI command and hence is avoided for NVMe and SATA scenerios. This
change disables "HybridStorageMode" for volteer baseboard. For boards
using optane HybridStorage needs to be enabled from overwrite devicetree.
We are enabling HybridStorage for volteer and volteer2 as those plaforms
have SKU's with optane storage.
BUG=b:158573805
TEST=Build and boot non optane device and confirm that FspSiliconInit
time is reduced. This saves ~100ms.
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Change-Id: I54fc78e3f888d4f2a02ba0ad6b9aef33eb872a9c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
List of changes:
1. Add devicetree.cb config parameters related to FSP-S UPD
2. Configure GPIO as per ADL-P RVP
3. Add files required for ramstage(ec.c, mainboard.c)
4. Add smihandler.c for SMM
5. Add devicetree changes as below
- USB OC PIN programing
- GPE configuration
- SATA port mapping
- LPSS configuration
- Audio configuration
- IA common SoC configuration
- EDP configuration
- TCSS USB configuration
- Enable S0ix
TEST=Able to boot ADL-P RVP without Chrome EC (using on-board EC) with
UART log over legacy UART0 port as 0x3f8 with NVME at RP9 reach till
depthcharge payload.
Change-Id: I120885956c88babfa09d24ce1079d49306919b8a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46265
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Move all files with register definitions into a `registers` subfolder.
Subsequent commits will move the remaining registers into this folder.
Tested with BUILD_TIMELESS=1, Asus P5QL PRO does not change.
Change-Id: I74dbd985b980d8a42bfaf2984820005320a803d3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45421
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Several registers have been copy-pasted from i945 and do not exist on
Eagle Lake. Moreover, other register definitions were missing. Use the
newly-added definitions in existing code, in place of numerical offsets.
Tested with BUILD_TIMELESS=1, Asus P5QL PRO does not change.
Change-Id: I9582d159aa2344bcf261f0e4b97b15787156f6e7
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45422
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
This change is required for use-cases like GPIO based I2C multiplexer
where more than one GPIOs are used as select lines.
BUG=b:169444894
TEST=Build and boot waddledee to OS. Ensure that the GPIO bindings for
an array of GPIOs are added to the ACPI table as follows:
Device (MUX0)
{
...
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
"\\_SB.PCI0.GPIO", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0125
}
GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
"\\_SB.PCI0.GPIO", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0126
}
})
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */,
Package (0x01)
{
Package (0x02)
{
"mux-gpios",
Package (0x08)
{
\_SB.PCI0.I2C3.MUX0,
Zero,
Zero,
Zero,
\_SB.PCI0.I2C3.MUX0,
One,
Zero,
Zero
}
}
}
})
}
Change-Id: I7c6cc36b1bfca2d48c84f169e6b43fd4be8ba330
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46056
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
EC being the TCPM decides the mux configuration after negotiating with the
port partner on the Type-C port. The APIs added here will give the
current essential mux state information for a given port.
BUG=None
BRANCH=None
TEST=Built coreboot image and verified that using this patch mux is being
set for display during boot
Change-Id: If994a459288ef31b0e6da8c6cdfd0ce3a0303981
Signed-off-by: Divya Sasidharan <divya.s.sasidharan@intel.com>
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
In order for USB Type-C devices to be detected prior to loading Kernel
PMC IPC driver API is needed to send IPC commands to the PMC to update
connection/disconnection states.
BUG=b:151731851
BRANCH=none
TEST=built coreboot image and booted to Chrome OS
Change-Id: Ide3528975be23585ce305f6cc909767b96af200f
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Enables Pcie M.2 support for WWAN and disable M.2 USB.
RP4 is already on and PcieRpEnable[3] is enabled. Clock source 2 is already
configured. Added missing gpio configuration.
BUG=none
TEST=Boot to OS, check WWAN functionality
Change-Id: Ie9b7915062b2ef65d881d478e64322c0b8765614
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45828
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change enables the USB4/Thunderbolt common layer for Intel SOC,
and enables the Intel USB4 PCIe driver. This moves the _DSD variables
from the DSDT into the SSDT and allows them to be configured for each
board if necessary.
Change-Id: I2564512d951046e015c148db42fdaf2d4b8b81dd
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44917
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This driver will generate the ACPI _DSD for the USB4 PCIe root port
properties instead of using static ASL.
It assigns the USB4 port number and marks the port as external and
hotplug capable.
Change-Id: I7086b06346ce63fab6bef4077fb76ae1d30dc1eb
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44915
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In order to enable SSDT generation for the DMA component of Intel USB4
ports, a PCI driver is required. This patch more or less adds a
`scan_bus` callback that will handle non-PCI devices downstream.
Change-Id: Ib9da051307b883eb99e500114378c9fd842ffc92
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
DP link rates are reported in an array of LE16 values. The current code
tries to parse them as 8-bit which doesn't get very far, causing us to
always drop into the fallback path. This patch should fix the issue
(+minor whitespace cleanup).
BUG=b:170630766
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I1e03088ee2d3517bdb5dcc4dcc4ac04f8b14a391
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46318
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
The current Kconfig help text is confusing because it talks about
enabling the Kconfig for disabling a UPD for disabling power gating.
Rewrite and clarify the help text.
Change-Id: I9637c549db1ce29f259708f316852fc2ae9e7c38
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46302
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
CBFS SAR and SAR tables in ACPI are currently supported only by Intel
WiFi devices. This change adds a check in `emit_sar_acpi_structures()`
to ensure that the PCI vendor for the device is Intel before
generating the SAR tables.
BUG=b:169802515
BRANCH=zork
Change-Id: Ibff437893a61ac9557cff243a70230f101089834
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46040
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change limits the scope of `wifi_generic_fill_ssdt()` and
`wifi_generic_acpi_name()` to generic.c since they are not used
outside of this file anymore. Also, since there is no need to split
SSDT generator into two separate functions,
`wifi_generic_fill_ssdt_generator()` is dropped and `.acpi_fill_ssdt`
directly points to `wifi_generic_fill_ssdt()`.
BUG=b:169802515
BRANCH=zork
Change-Id: I2cbb97f43d2d9f9ed6d3cf8f0a9b13a7f30e922e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46038
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently, drivers/intel/wifi is a PCI driver (provides `struct
pci_driver`) as well as a chip driver (provides `struct
chip_operations`). However, there is no need for a separate chip
driver for the WiFi device since drivers/wifi/generic already provides
one.
Having two separate chip drivers makes it difficult to multi-source
WiFi devices and share the same firmware target without having to add
a probe property for each of these devices. This is unnecessary since
the WiFi driver in coreboot is primarily responsible for:
1. PCI resource allocation
2. ACPI SSDT node generation to expose wake property and SAR tables
3. SMBIOS table generation
For the most part, coreboot can perform the above operations without
really caring about the specifics of which WiFi device is being used
by the mainboard. Thus, this change drops the driver for intel/wifi
and moves the PCI driver support required for Intel WiFi chips into
drivers/wifi/generic. The PCI driver is retained for backward
compatibility with boards that never utilized the chip driver to
support Intel WiFi device. For these devices, the PCI driver helps
perform the same operations as above (except exposing the wake
property) by utilizing the same `wifi_generic_ops`.
This change also moves DRIVERS_INTEL_WIFI config to
wifi/generic/Kconfig.
BUG=b:169802515
BRANCH=zork
Change-Id: I780a7d1a87f387d5e01e6b35aac7cca31a2033ac
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46036
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
DRAM part number may not be provisioned in CBI during early stages of
development. Logging the debug statement with error severity interferes
with some of the test tools. Lower the severity of debug statement to
BIOS_DEBUG.
BUG=b:170529094
TEST=Build and boot to ChromeOS in Drawlat.
Change-Id: Ib0c707ec6478060d6e18ea01cc467dfda00a6d42
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46299
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Create the elemi variant of the volteer reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.2.0).
BUG=b:170604353
BRANCH=None
TEST=util/abuild/abuild -p none -t google/volteer -x -a
make sure the build includes GOOGLE_ELEMI
Change-Id: I6013b6d8b28610a79f5ec49d373b2897799bffef
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46294
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
This change drops the dependency of DRIVERS_WIFI_GENERIC on
HAVE_ACPI_TABLES as the driver provides operations other than the ACPI
support for WiFi devices. Since the dependency is now dropped, ACPI
operations in generic.c are guarded by CONFIG(HAVE_ACPI_TABLES).
BUG=b:169802515
BRANCH=zork
Change-Id: I16444a9d842a6742e3c97ef04c4f18e93e6cdaa9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46037
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change switches all mainboard devices to use drivers/wifi/generic
instead of drivers/intel/wifi chip driver for Intel WiFi
devices. There is no need for two separate chip drivers in coreboot to
handle Intel and non-Intel WiFi devices since the differences can be
handled at runtime using the PCI vendor ID. This also allows mainboard
to easily multi-source WiFi chips and still use the same firmware
image without having to distinguish between the chip drivers.
BUG=b:169802515
BRANCH=zork
Change-Id: Ieac603a970cb2c9bf835021d1fb0fd07fd535280
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46035
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
This change adds support in generic WiFi driver in coreboot to
generate SMBIOS data for the WiFi device. Currently, this is used only
for Intel WiFi devices and the function is copied over from Intel WiFi
driver in coreboot. This change is done in preparation for getting rid
of the separate chip driver for Intel WiFi in coreboot.
BUG=b:169802515
BRANCH=zork
Change-Id: If3c056718bdc57f6976ce8e3f8acc7665ec3ccd7
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46034
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Pictures on the internet show that the Asrock H110M-DVS (Kconfig.name)
only has two DIMM slots. Since the vendor's website advertises support
for dual channel memory, drop the SPD addresses for the second slot of
each channel. The result is the same as several other two-slot boards.
Change-Id: I4b62e9196bfa3a688016399d7e025ca995f3c12c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
The DQ and DQS byte maps do not apply to DDR4 configurations, and the
RCOMP resistor and target values are not correct for SKL-S (or KBL-S).
Drop the byte maps and use RCOMP values for the correct platform type.
RCOMP resistor values for all non-socketed platforms are listed in the
Platform Design Guide, and also appear in schematics. For SKL-S, the
RCOMP resistors are on the CPU and their values have been confirmed
by measuring them on an i5-6400, and match the PDG values for SKL-H.
RCOMP target values can be guessed from Intel Document #573387 and some
of them are also present in datasheet volume 1, under DC specifications.
Change-Id: I699d46b9b516be8946367e6d9b24883ae1e78d03
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46246
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
cbfstool emits cbfs_stage objects in little endian encoding.
However, big endian targets then read the wrong values from
these objects. To maintain backwards compatibility with existing
cbfs objects add in the little endian deserialization.
Change-Id: Ia113f7ddfa93f0ba5a76e0397f06f9b84c833727
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46227
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Marty E. Plummer <hanetzer@startmail.com>
Refer to commit d7b88dc (mb/google/x86-boards: Get rid of power button
device in coreboot)
This change gets rid of the generic hardware power button from all
intel mainboards and relies completely on the fixed hardware power
button.
Change-Id: I8f9d73048041d42d809750fdb52092f40ab8f11f
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46268
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Expose configuration of Intel PAVP (Protected Audio-Video Path, a
digital rights protection/management (DRM) technology for
multimedia content) to Kconfig.
Per the FSP default, this was always being enabled previously.
Change-Id: I2aae741bb30e3be3c64324cd6334778bd271a903
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42745
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
By ironing out cosmetic differences between Cannon Lake and Ice Lake,
comparing actual code differences using a diff tool becomes simpler.
Tested with BUILD_TIMELESS=1, Prodrive Hermes remains identical.
Change-Id: I4d9f882f9f8af1245e937b0d47bc7e993547365f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45778
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
The DQ and DQS byte maps do not apply to DDR4 configurations, thus
simply drop them.
Also drop ECT, as it's already initialized to zero and can't be used on
DDR4 anyway.
Further, trim down all the meaningless and/or wrong comments.
Change-Id: I32f1b7bb46eaaf0f0ecad1df310f5de988f64c85
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46249
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The keyboard only works randomly, because SeaBIOS initializes PS/2
before the EC is ready.
Set the PS/2 timeout for SeaBIOS to 500 ms, to wait for the EC before
initializing the keyboard.
Test: keyboard works fine.
Change-Id: I2be75961035f04a7ffa6f7e1dbaabb1243b857f9
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45959
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Refactor DPTF section of code under the baseboard devicetree
and overridetree. This makes override mechanism more simpler,
because not all the DPTF fields need to be overridden.
BUG=None
BRANCH=None
TEST=Built and tested on dedede system
Change-Id: I8e7cfe60c010ed4c07f9089325b289519e861f84
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46090
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Update FSP headers for Tiger Lake platform generated based on FSP
version 3373. Previous version was 3333.
Changes include below UPDs:
ITbtPcieTunnelingForUsb4
SlowSlewRate
FastPkgCRampDisable
BUG=b:169759177
BRANCH=none
TEST=build and boot delbin/tglrvp
Cq-Depend:chrome-internal:3308203, chrome-internal:3308204
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I2e28905f8f7241940ea92ac3e83b52ff7948953a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45630
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Dossym Nurmukhanov <dossym@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The shld instruction does an arithmetic shift left on 64bit operants,
but it's not the instruction we want, because what it actually does is
shifting by cl, and storing the result in address 32.
This wasn't noticed with QEMU as the DRAM is up and address 32 is valid.
On real hardware when CAR is running this instruction causes a crash.
Replace the instruction with the correct 64bit arithmetic left shift.
Change-Id: Iedad9f4b693b1ea05898456eac2050a9389f6f19
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45820
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a weak override function to allow mainboard to override chip
configuration like GPIO PM.
BUG=None
TEST=Build and boot waddledee to OS. Ensure that the suspend/resume
sequence works fine.
Change-Id: I40fa655b0324dc444182b988f0089587e3877a47
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45856
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This patch adds options that support building the STM as a
part of the coreboot build. The option defaults assume that
these configuration options are set as follows:
IED_REGION_SIZE = 0x400000
SMM_RESERVED_SIZE = 0x200000
SMM_TSEG_SIZE = 0x800000
Change-Id: I80ed7cbcb93468c5ff93d089d77742ce7b671a37
Signed-off-by: Eugene Myers <cedarhouse@comcast.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44686
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: ron minnich <rminnich@gmail.com>
Currently devices behind I2C controllers are scanned using scan_smbus.
This is done under the assumption that there are no bridge devices behind
I2C controllers. In order to support I2C multiplexers which act as
bridge devices and have devices behind them, scan the I2C controllers
using scan_static_bus.
BUG=b:169444894
TEST=Build and boot waddledee to OS. Ensure that all the bridge devices
behind I2C controller are scanned and enabled.
Change-Id: I9d8159a507683d8c56dd5e59d20c30ed7e4b2cab
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45949
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Update the information format in the comments above the macros in the
generated gpio.h file:
PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_39, UP_20K, DEEP, NF1, TxLASTRxE,
DISPUPD), /* LPSS_UART0_TXD */ -->(i)
/* GPIO_39 - LPSS_UART0_TXD */ --> (ii)
/* DW0: 0x44000400, DW1: 0x00003100 */ --> (ii)
/* DW0 : PAD_TRIG(OFF) - IGNORED */ --> (iii)
/* _PAD_CFG_STRUCT(GPIO_39, PAD_FUNC(NF1) | PAD_RESET(DEEP) |
PAD_TRIG(OFF), PAD_PULL(UP_20K) | PAD_IOSTERM(DISPUPD)), */ --> (iiii)
PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_39, UP_20K, DEEP, NF1, TxLASTRxE,
DISPUPD),
Also, in the case of field macros:
/* GPIO_39 - LPSS_UART0_TXD */ --> (ii)
/* DW0: 0x44000400, DW1: 0x00003100 */ --> (ii)
/* DW0 : PAD_TRIG(OFF) - IGNORED */ --> (iii)
/* PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_39, UP_20K, DEEP, NF1, TxLASTRxE,
DISPUPD), */ --> (iiii)
PAD_CFG_STRUCT(GPIO_39, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF),
PAD_PULL(UP_20K) | PAD_IOSTERM(DISPUPD)),
By default, if do not use the -i... option, then additional information
in comments will not be generated.
TEST:
git clone https://github.com/maxpoliak/inteltool-examples.git test
./intelp2m -n -file test/inteltool-asrock-h110m-stx.log
./intelp2m -fld cb -file test/inteltool-asrock-h110m-stx.log
./intelp2m -fld fsp -file test/inteltool-asrock-h110m-stx.log
./intelp2m -fld raw -file test/inteltool-asrock-h110m-stx.log
Before and after (now with -i key) the patch, gpio.h is no different.
Change-Id: I760f4aadece786ea455fb7569f42e06fefce2b61
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45168
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add SPD support for DDR4 memory part H5ANAG6NCJR-XNC.
Eldrid should use DRAM_ID strap ID 4 (0100) on SKUs populated
with H5ANAG6NCJR-XNC DDR4 memory parts.
BUG=b:161772961
TEST="FW_NAME=eldrid emerge-volteer coreboot" and verify it builds
successfully.
Change-Id: Ia26315479ce1a749a0f7c9e81f134f7068d7eb0b
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45963
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The kernel driver enumerates communities 0, 1, 4, and 5, and assigns
these addresses based on the BARs enumerated by coreboot. Coreboot
was defining communities 0, 1, 2, 4, and 5. This meant the kernel
was not controlling GPIOs in communities 4 and 5, since the resources
were wrong.
Remove community 2 for now. We can add it back if the kernel ends up
needing it.
BUG=b:169444894
TEST=Test controlling GPP_E5, verify actually toggles register.
Signed-off-by: Evan Green <evgreen@chromium.org>
Change-Id: I823e1aa942cfccadde01b9371d481457ab088c31
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46115
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This will reduce boot time by 7ms. Some of the initial designs
don't have a pull-up resistor on the CMD line. These designs still boot
at 400 kHz despite not having the pull-up.
BUG=b:158766134
TEST=Boot dirinboz, run integrity test, b:169940185
BRANCH=zork
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I6bac8284b67070ff2c5838257f4ae2ead0e69c22
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45934
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This will reduce boot time by 7ms. Some of the initial designs
don't have a pull-up resistor on the CMD line. These designs still boot
at 400 kHz despite not having the pull-up.
BUG=b:158766134
TEST=WIP
BRANCH=zork
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I1191d73a2a3f72f99de187a946162460acbb287a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45935
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This will reduce boot time by 7ms. Some of the initial designs
don't have a pull-up resistor on the CMD line. These designs still boot
at 400 kHz despite not having the pull-up.
BUG=b:158766134
TEST=WIP
BRANCH=zork
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I2fcbe35103020c3444902c077b4985f87f970671
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45936
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This will reduce boot time by 7ms. Some of the initial designs
don't have a pull-up resistor on the CMD line. These designs still boot
at 400 kHz despite not having the pull-up.
BUG=b:158766134
TEST=Boot on Vilboz with emmc
BRANCH=zork
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I9a1e47dbee3fcc7317857d40c5418be30d755d61
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45933
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The patch allows to configure sensors with a remote diode connected
and a on-chip local temperature sensor from the devicetree for the
board that uses this HWM. According to the documentation [1], this is
done by setting the corresponding bits in the Mode Selection Register
(22h). It is necessary for some Intel processors (Apollo Lake SoC)
that do not support PECI and the CPU temperature is taken from the
thermistor.
TEST = After loading the nct7802 module on the Kontron mAL-10 [2] with
Linux OS, we can see configuration of the HWM with one sensor in
the thermistor mode:
user@user-apl:~$ sensors
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +41.0°C (high = +110.0°C, crit = +110.0°C)
Core 0: +40.0°C (high = +110.0°C, crit = +110.0°C)
Core 1: +40.0°C (high = +110.0°C, crit = +110.0°C)
Core 2: +41.0°C (high = +110.0°C, crit = +110.0°C)
Core 3: +41.0°C (high = +110.0°C, crit = +110.0°C)
nct7802-i2c-0-2e
Adapter: SMBus CMI adapter cmi
in0: +3.35 V (min = +0.00 V, max = +4.09 V)
in1: +1.92 V
in3: +1.21 V (min = +0.00 V, max = +2.05 V)
in4: +1.68 V (min = +0.00 V, max = +2.05 V)
fan1: 0 RPM (min = 0 RPM)
fan2: 868 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
temp1: +42.5°C (low = +0.0°C, high = +85.0°C)
(crit = +100.0°C) sensor = thermistor
temp4: +44.0°C (low = +0.0°C, high = +85.0°C)
(crit = +100.0°C)
temp6: +0.0°C
[1] page 30, section 7.2.32, Nuvoton Hardware Monitoring IC NCT7802Y
with PECI 3.0 interface, datasheet, revision 1.2, february 2012
[2] https://review.coreboot.org/c/coreboot/+/39133
Change-Id: I28cc4e5cae76cf0bcdad26a50ee6cd43a201d31e
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39766
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Allows to change the I2C bus frequency by overriding i2c_frequency
option from the board devicetree. Thus, the I2C controller can use
Fast-mode (Fm), with a bit rate up to 400 kbit/s and Fast-mode Plus
(Fm+), with a bit rate up to 1 Mbit/s [1].
Tested on Kontron mAL10 COMe module with T10-TNI carrierboard [2].
[1] I2C-bus specification and user manual, doc #UM10204, Rev. 6,
4 April 2014.
[2] https://review.coreboot.org/c/coreboot/+/39133
Change-Id: If0eb477af10d00eb4f17f9c01209f170b746ad3d
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44476
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change drops maxsleep parameter from chip config and instead
hardcodes the deepest sleep state from which the WiFi device can wake
the system up from to SLP_TYP_S3. This is similar to how other device
drivers in coreboot report _PRW property in ACPI. It relieves the
users from adding another register attribute to devicetree since all
mainboards configure the same value. If this changes in the future, it
should be easy to bring the maxsleep config parameter back.
BUG=b:169802515
BRANCH=zork
Change-Id: I42131fced008da0d51f0f777b7f2d99deaf68827
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46033
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This change adds a call to `pci_dev_is_wake_source()` to determine and
log WiFi wake source to event log just like the Intel WiFi driver
does. This is done in preparation to merge the generic and Intel WiFi
drivers in follow-up changes.
BUG=b:169802515
BRANCH=zork
Change-Id: I20528ae1f72ca633da31e01d777c46fd5f4a337f
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46032
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This change uses the newly added `pci_dev_is_wake_source()` helper function
to determine and log WiFi wake source instead of assuming a hard-coded
register value to check. This is done in preparation to merge the
generic WiFi and Intel WiFi drivers in coreboot in follow-up changes.
BUG=b:169802515
BRANCH=zork
Change-Id: I9bdb453092b4ce7bdab2969f13e0c0aa8166dc0a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46031
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This change adds a helper function `pci_dev_is_wake_source()` that
checks PME_STATUS and PME_ENABLE bits in PM control and status
register to determine if the given device is the source of wake.
BUG=b:169802515
BRANCH=zork
Change-Id: I06e9530b568543ab2f05a4f38dc5c3a527ff391e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Move all files with register definitions into a `registers` subfolder.
Subsequent commits will move the remaining registers into this folder.
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 remains identical.
Change-Id: I872269ca3c7fbbcffe83327a20bcf8d98b356beb
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45381
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Several registers have been copy-pasted from i945 and do not exist on
Ironlake. Moreover, other register definitions were missing. Use the
newly-added definitions in existing code, in place of numerical offsets.
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 remains identical.
Change-Id: I8ac99166a8029dcdbb59028b4a7ee297249de5db
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Use the device aliases provided by tigerlake chipset.cb instead of
the raw pci device+function. Take advantage of the default states
in chipset.cb and only list the devices that are enabled for all
volteer variants.
Change-Id: I5620004afd7fa4d50389f32dd79148960a2b2662
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44039
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change extends the devicetree override one more layer and allows
the chipset to provide the base devicetree. This allows the chipset to
assign alias names to devices as well as set default register values.
This works for both the baseboard devicetree.cb as well as variant
overridetree.cb.
chipset.cb:
device pci 15.0 alias i2c0 off end
devicetree.cb:
device ref i2c0 on end
BUG=b:156957424
Change-Id: Ia7500a62f6211243b519424ef3834b9e7615e2fd
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44037
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
HPD on this bridge chip is a bit useless. This is an eDP bridge so the HPD is
an internal signal that's only there to signal that the panel is done powering up.
But the bridge chip debounces this signal by between 100 ms and 400 ms (depending on process,
voltage, and temperate). One particular panel asserted HPD 84 ms after it was powered on
meaning that we saw HPD 284 ms after power on. Assume that the panel driver will have the
hardcoded delay in its prepare and always disable HPD.
Change-Id: Iea7dd75b57fa55ec182c0bee09b0f35208357892
Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Currently, trogdor devices have a section RO_DDR_TRAINING that is used
to store memory training data. Changing so that we reuse the same
mrc_cache API as x86 platforms. This requires renaming
RW_DDR_TRAINING to RW_MRC_CACHE and removing RO_DDR_TRAINING in the
fmap table.
BUG=b:150502246
BRANCH=None
TEST=FW_NAME="lazor" emerge-trogdor coreboot chromeos-bootimage
Make sure that first boot after flashing does memory training
and next boot does not.
Boot into recovery two consecutive times and make sure memory
training occurs on both boots.
Change-Id: I16d429119563707123d538738348c7c4985b7b52
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46111
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Without skipping of DRHD generation for non-PCIe stack, the OS
kernel detects incorrect DMAR table with following messages:
[ 0.561817] Your BIOS is broken; DMAR reported at address 0
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I098605daf12a264f390613581427ec722afcddaf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45887
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
If Cr50 is running old firmware version and hence does not ensure long
interrupt pulses, override the GPIO PM configuration.
BUG=None
TEST=Build and boot waddledee to OS. Ensure that any chip override
happens before FSP silicon parameter initialization. Ensure that the
suspend/resume sequence works fine. Ensure that the reboot sequence
works fine for 50 iterations.
Change-Id: I455c51d4a63b1b5edadbf00c786ce61b0ba1ff00
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45857
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
ALS is not stuffed in octopus boards. Hence disable ALS ACPI devices.
BUG=b:169245831
BRANCH=octopus
TEST=Ensure that ALS devices are disabled in ACPI tables.
Change-Id: I5ad28f01b0515a41b314116eb2d05c520df0f86e
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45741
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The BIOS log was looking in the spd data for the part name, but part
names are stripped from generic SPDs. For these cases, a mainboard
can override the dram part number string, so the spd logging code
needs to check for an override string when logging the dram part
number.
Change print_spd_info() to use an override string if declared.
BUG=b:168724473
TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot
volteer2 and verify that the BIOS log shows a part name when
logging SPD information:
SPD: module part number is K4U6E3S4AA-MGCL
I also modified volteer to not override the part name and verified
that this change did as expected and printed a blank string.
Change-Id: I91971e07c450492dbb0588abd1c3c692ee0d3bb0
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45459
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Modify mrc_cache_load current to return the size of the mrc_cache
entry so that caller will know what the actual size of the data
returned is. This is needed for ARM devices like trogdor, which need
to know the size of the training data when populating the QcLib
interface table.
BUG=b:150502246
BRANCH=None
TEST=./util/abuild/abuild -p none -t GOOGLE_NAMI -x -a
Change-Id: Ia314717ad2a7d5232b37a19951c1aecd7f843c27
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46110
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This will reduce boot time by 7ms. Some of the initial designs
don't have a pull-up resistor on the CMD line. These designs still boot
at 400 kHz despite not having the pull-up.
BUG=b:158766134
TEST=Boot Berknip w/ eMMC to OS.
BRANCH=zork
Change-Id: I5d55f55b8208b4dc3fbdc9d1ec6333f9e211e3fd
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45931
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This will reduce boot time by 7ms. Some of the initial designs
don't have a pull-up resistor on the CMD line. These designs still boot
at 400 kHz despite not having the pull-up.
BUG=b:158766134
TEST=Boot on morphius with and without patch, confirm ~7ms improvement
BRANCH=zork
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I7f6efd3d5839f154f2487a07654be8e35634bbbc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45932
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Implement mainboard_silicon_init_params() to allow for disabling of
TBT root ports if the device does not have usb4 hardware.
Add code to mainboard_memory_init_params() to disable memory-related
settings associated with TBT in cases where no usb4 is available.
BUG=b:167983038
TEST=none
Change-Id: Iab23c07e15f754ca807f128b9edad7fdc9a44b9d
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Make boot state init run before the init_chips code. This allows for
correcting tbt settings at a stage earlier than devicetree parsing.
BUG=b:167983038
TEST=none
Change-Id: I8364746ba311575e7de93fa25241ffef7faf35b4
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45961
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Override smbios_fill_dimm_locator for type 17 Locator and Bank Locator.
Also remove CONFIG(GENERATE_SMBIOS_TABLES) compile option because SMBIOS
is always enabled and it makes the code cleaner.
One sample type 17 table displayed as below:
Handle 0x0010, DMI type 17, 40 bytes
Memory Device
...
Locator: DIMM F0
Bank Locator: _Node0_Channel5_Dimm0
Tested=On OCP Delta Lake, the Locator and Bank Locator strings
are expected.
Change-Id: I84531f9ee8bc76d9529aa983bc13e64f40c93138
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
With CPX-SP FSP, PCH IOAPIC handles the first 120(0x78) GSIs. Correct
the coreboot assignment of GSIs for IO APICs.
Without this patch, there are following target OS boot messages:
[ 1.098771] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-119
[ 1.099159] GSI range [24-31] for new IOAPIC conflicts with GSI[0-119]
After this patch, the boot messages are:
[ 0.399498] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-119
[ 0.399848] IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 120-127
Also without this patch, there is boot stability issue. About one in
20 reboots, the target OS fails to boot with following failure:
[ 4.325795] mce: [Hardware Error]: Machine check events logged
[ 4.326597] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 9: ee2000000003110a
[ 4.327594] mce: [Hardware Error]: TSC 0 ADDR fe9e0000 MISC 228aa040101086
[ 4.328596] mce: [Hardware Error]: PROCESSOR 0:5065b TIME 1601443875 SOCKET 0 APIC 0 microcode 700001d
The MCE error happens in bank 9. The Model specific error code
shows it is about SAD_ERR_WB_TO_MMIO error (doc 604926), which means
something goes wrong when cache write back to mmio. It is a generic
transaction type error in level 2.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I45e941591300dad6d583a6dcb41f45e984753c07
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45941
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch moves gfx.asl into common block acpi directory to
avoid duplicating the same ASL code block across SoC directory.
TEST=Able to build and boot CML platform.
1) Dump and disassemble DSDT, verify GFX0 device present inside
common gfx.asl is still there.
2) Verify no ACPI error seen while running 'dmesg` from console.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: Ie34181a6783d348265cf4299dec5c41e7f4f736f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45997
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
To remove the xhci0_force_gen1 and use usb3_port_force_gen1 instead.
The xhci0_force_gen1 is used for force all port on xhci0 to USB3 GEN1.
Now variant can use the usb3_port_force_gen1 to customize which port
it needs to limit.
BUG=b:167651308
BRANCH=zork
TEST=Build, verify the USB3 speed in gen1
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: If5f0c1f22d8c98c4461f09d074bf082c340b14d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46041
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
VBOOT_STARTS_VEFORE_BOOTBLOCK indicates that verstage starts before
bootblock. However "cbmem -1" will first try to match "bootblock
starting" to find out the beginning of console for current boot.
Change ENV_STRING for verstage to "verstage-before-bootblock" in the
case and add regex in cbmem utility to grab it.
BUG=b:159220781
TEST=flash and boot, check `cbmem -1`
BRANCH=zork
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: Ica38f6bfeb05605caadac208e790fd072b352732
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
The PSP will now pass us data on the PSP boot mode and the production
silicon level. Print these values out to save in the log.
These definitions are in a vendorcode include directory that was
previously only included in verstage. Add the include directory
to all stages.
BUG=b:170237834
TEST=Build & Boot - See values printed.
BRANCH=Zork
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: Iee87413d1473786cf0e148a8088d27f8d24a47a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
LIMITS_CFG is not used/required by trogdor. Supporting this requires an FMAP
partition as well as code, removing this support saves space and maintenance
headaches.
Change-Id: I9f57f5b520599ba6d708c91df9851e0e86b4b6c0
Signed-off-by: Manideep Kurumella <mkurumel@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45704
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add support for trackpoint wakeup from S3 by adding device events to
mainboard and defining for morphius.
BUG=b:160345665
BRANCH=zork
TEST=tested trackpoint wake from S3 on morphius DVT
Signed-off-by: Josie Nordrum <josienordrum@google.com>
Change-Id: I982f0f4b60fbaeb389774531e1dee83da77cb8a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45965
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
psp_verstage uses separate printk implementation, which does not include
code to add console output to cbmem.
Add cbmemc_init and cbmemc_tx_byte to add console output to cbmem.
BUG=b:159220781
TEST=build
BRANCH=zork
Change-Id: I63ba5814903565c372dbeb50004565a371dad730
Signed-off-by: Kangheui Won <khwon@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46059
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
`pci_dev_init()` is used to load and run option ROM on VGA class
devices (PCI_CLASS_DISPLAY_VGA). WiFi device is not a VGA class device
and hence the call to `pci_dev_init()` is not required. This change
drops the call to `pci_dev_init()` from `wifi_pci_dev_init()` in Intel
WiFi driver.
BUG=b:169802515
BRANCH=zork
Change-Id: I6588ea0a5c848904088d05fd1cbdf677b2dc8ea9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
WiFi devices supported by the generic WiFi driver are PCIe devices
which need to be managed using the standard pci_dev_* operations to
read, set and enable resources. This change updates the
device_operations structure `wifi_generic_ops` to use the standard
pci_dev_* operations for these devices.
BUG=b:169802515
BRANCH=zork
Change-Id: I8b306259e205ecb963c0563000bd96ec6b978b8b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46028
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Add an empty SPD in SPD_SOURCES when creating a new variant of
hatch, volteer, waddledee, or waddledoo, so that coreboot can build
successfully.
For variants that use spd_tools, add an empty mem_parts_used.txt so
that the developer can add the supported memory parts and regenerate
the Makefile.inc with the correct SPD references.
Add an empty SPD for LPDDR4x for waddledee and waddledoo to use.
BUG=b:169422833
TEST=create a new variant of hatch, volteer, waddledee, and waddledoo.
Observe that each one succeeds.
Signed-off-by: Paul Fagerburg <pfagerburg@google.com>
Change-Id: I06dfb6103701bf8949180595f1e98fac48bcc585
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45746
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Move ACPI macros to a header file to be used in multiple
ASL files.
This could be moved to intel/common in the future to reduce
the amount of duplicate ASL code.
Tested by checking build/dsdt.asl doesn't change.
Change-Id: Id2441763fe335154048c9a584a227a18e8c5391c
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Remove the NumElements and allow the ASL compiler to fill them in.
This is safer than hard coding the NumElements.
For Package (NumElements) {PackageList}, "If NumElements is absent,
it is automatically set by the ASL compiler to match the number of
elements in the PackageList" ACPI v6.2 sec 19.6.101.
Change-Id: I73df9e31011ad0861d4755fdbcbbd93e4e0b5a51
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45837
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Refer to
commit 0359d9d (soc/intel: Make use of PMC low power program
from common block)
commit 1366e44 (soc/intel: Move pch_enable_ioapic() to common
code)
commit 78463a7 (soc/intel: Move soc_pch_pirq_init() to common code)
commit 8971ccd (soc/intel: Move pch_misc_init() to common code)
for details
Change-Id: Ic83d332cf2bfe8eded1667dd1503e718d854f10b
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46053
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
List of changes:
1. Select common ACPI Kconfig to include common ACPI code block
from IA-common code
2. Select ACPI Kconfig support for wake up from sleep states.
3. Add SoC ASL code in ASL 2.0 syntax for SoC IPs like IPU, ISH,
LAN, HDA etc.
Change-Id: I7509e8c46038b1edfc501db74e763f198efb56ab
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45972
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
There is requirement to change PM flow for S0ix along with TBT firmware
update under device attached and no device attached scenarios. This
change invokes D3CE and D3CX in DMA _PS3 and _PS0 respectively.
BUG=b:158777291
TEST=Validated s0ix cycles for USB4 device attached and no device
attached test cases along with updated TBT firmware rev35.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Iebc8065fe4c8600960d089577608890ab12a95fc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This patch makes Fleex EC wake up AP from s0ix when the state of
charge drops to 5%.
Demonstrated as follows:
1. Boot Fleex.
2. Run powerd_dbus_suspend.
3. On EC, run battfake 5.
4. System resumes.
BUG=b:163721887
BRANCH=Octopus
TEST=Verified on Fleex:
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Change-Id: I4a998ad0aef5a7cfc6fd18995bde5571e6127e77
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45967
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Enable CHROMEOS_DRAM_PART_NUMBER_IN_CBI on hatch, dedede, and volteer
to use the common version of mainboard_get_dram_part_num().
Remove duplicate instances of mainboard_get_dram_part_num().
BUG=b:169789558, b:168724473
TEST="emerge-volteer coreboot && emerge-hatch coreboot &&
emerge-dedede coreboot" and verify it builds.
Change-Id: I4e29d3e7ef0f3370eab9a6996a5c4a21a636b40e
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45883
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Consolidate all weak declarations of mainboard_get_dram_part_num() to
instead use the common definition in lib/spd_bin.c.
BUG=b:168724473
TEST="emerge-volteer coreboot && emerge-nocturne coreboot &&
emerge-dedede coreboot" and verify build succeeds without error.
Change-Id: I322899c080ab7ebcf1cdcad3ce3dfa1d022864d1
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45890
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add CHROMEOS_DRAM_PART_NUMBER_IN_CBI Kconfig option to declare whether
the SPD Module Part Number (memory part name) is stored in the CBI.
Move mainboard_get_dram_part_num() into src/vendor/google/chromeos
to allow mainboards to use it without having to duplicate that code
by enabling the CHROMEOS_DRAM_PART_NUMBER_IN_CBI config option.
BUG=b:169789558, b:168724473
TEST="emerge-volteer coreboot && emerge-hatch coreboot &&
emerge-dedede coreboot && emerge-nocturne coreboot" and verify it
builds.
Change-Id: I0d393efd0fc731daa70d3990e5b69865be99b78b
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Change mainboard_get_dram_part_num() to return a constant character
pointer to a null-terminated C string and to take no input
parameters. This also addresses the issue that different SOCs and
motherboards were using different definitions for
mainboard_get_dram_part_num by consolidating to a single definition.
BUG=b:169774661, b:168724473
TEST="emerge-volteer coreboot && emerge-dedede coreboot && emerge-hatch
coreboot" and verify build completes successfully.
Change-Id: Ie7664eab65a2b9e25b7853bf68baf2525b040487
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45873
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch moves ish.asl into common block acpi directory to
avoid duplicating the same ASL code block across SoC directory.
TEST=Able to build and boot TGL, CML platform.
1) Dump and disassemble DSDT, verify ISHB device present inside
common ish.asl is still there with correct _ADR value.
2) Verify no ACPI error seen while running 'dmesg` from console.
CML platform:
Device (ISHB)
{
Name (_ADR, 0x00130000) // _ADR: Address
Name (_DDN, "Integrated Sensor Hub Controller") //_DDN: DOS Device Name
}
TGL/JSL platform:
Device (ISHB)
{
Name (_ADR, 0x00120000) // _ADR: Address
Name (_DDN, "Integrated Sensor Hub Controller") //_DDN: DOS Device Name
}
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I33c1649d7a632c7b147e1bf307cfb5c1dfd84c0c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45995
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This patch moves platform.asl into common block acpi directory to
avoid duplicating the same ASL code block across SoC directory.
TEST=Able to build and boot TGL, CNL and CML platform.
1) Dump and disassemble DSDT, verify _PIC method present inside
common platform.asl is still there.
2) Verify no ACPI error seen while running 'dmesg` from console.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I5189b03d6abfaec39882d28b40a9bfa002128be3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45982
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Refer _WAK and _PTS ASL functions from common platform.asl
TEST=Dump and disassemble DSDT, verify all methods present inside
common platform.asl like _WAK, _PTS etc. are still there.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I625e42b3c49abbb3595a4307da5fc24850a98fbb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45980
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch moves smbus.asl into common block acpi directory to
avoid duplicating the same ASL code block across SoC directory.
TEST=Able to build and boot TGL, CNL and CML platform.
1) Dump and disassemble DSDT, verify SBUS device present inside
common smbus.asl is still there.
2) Verify no ACPI error seen while running 'dmesg` from console.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: Ib1ae48f7ece3e521501d92c40cd551287ea2f1ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45979
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This patch moves pch_glan.asl into common block acpi directory to
avoid duplicating the same ASL code block across SoC directory.
TEST=Able to build and boot TGL, CNL and CML platform.
1) Dump and disassemble DSDT, verify GLAN device present inside
common pch_glan.asl is still there.
2) Verify no ACPI error seen while running 'dmesg` from console.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I479678c864eba39e5ab04f658600e8cba48198ef
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45975
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
List of changes:
1. Add required SoC programming till ramstage
2. Include only required headers into include/soc
3. Add CPU, PCH and SA EDS document number and chapter number
4. Fill required FSP-S UPD to call FSP-S API
Change-Id: I3394f585d66b14ece67cde9e45ffa1177406f35f
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45759
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
List of changes:
1. Create Kconfig to select pmc low power program by SoC
2. Add API to make ACPI timer disable
3. Add API to ignore XTAL shutdown for SLP_S0# assertion
Change-Id: I017ddc772f02ccba889d316319ab3d5626b80ba5
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45794
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
List of changes:
1. Move pch_misc_init() into common block code.
2. Remove redundant LPC functions from SoC directory and
refer from block/lpc directory.
3. Create macros for IO port 0x61 and 0x70 as applicable.
TEST=Able to build and boot hatch and tglrvp platform without seeing
any functional impact.
Change-Id: Ie36ee63869c076d251ccfa5409001d18f22600d7
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
List of changes:
1. Rename soc_pch_pirq_init() as pch_pirq_init() and
move into common block code.
2. Remove redundant LPC functions from SoC directory and
refer from block/lpc directory.
TEST=Able to build and boot hatch and tglrvp platform without seeing
any functional impact.
Change-Id: I856b5ca024e58fd14b4d1721f23d9516a283ebf8
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45809
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
List of changes:
1. Move pch_enable_ioapic() into common block code.
2. Remove redundant LPC functions from SoC directory and
refer from block/lpc directory.
TEST=Able to build and boot hatch and tglrvp platform without seeing
any functional impact.
Change-Id: I2a6afc1da50c8ee5bccda7f5671b516dc31fe023
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45787
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Previously, we were writing to cbmem after memory training and then
writing the training data from cbmem to mrc_cache in ramstage. We
were doing this because we were unable to read/write to SPI
simultaneously on older x86 chips. Now that newer chips allow for
simultaneously reads and writes, we can move the mrc_cache update into
romstage. This is beneficial if there is a reboot for some reason
after memory training but before the previous mrc_cache_stash_data
call originally in ramstage. If this happens, we would lose all the
mrc_cache training data in the next boot even though we've already
performed the memory training.
Added new config BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES to accomodate
older x86 platforms that don't do mmapping but still want to use the
cbmem to store the mrc_cache data in order to write the mrc_cache data
back at a later time. We are maintaining the use of cbmem for these
older platforms because we have no way of validating the earlier write
back to mrc_cache at this time.
BUG=b:150502246
BRANCH=None
TEST=reboot from ec console. Make sure memory training happens.
reboot from ec console. Make sure that we don't do training again.
Signed-off-by: Shelley Chen <shchen@google.com>
Change-Id: I3430bda45484cb8c2b01ab9614508039dfaac9a3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44196
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Increase the DRAM cache size for Braswell to address the
compilation error
Cache as RAM area too full
when moving the mrc_cache writeback to romstage. We need to increase
this first before landing the CL moving mrc_cache writeback to
romstage.
BUG=b:150502246
BRANCH=None
TEST=Able to successfully compile braswell boards
Change-Id: I1538d504ddad8654c79a789e58ffe6b11b5d544c
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45827
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Added new config BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES to accomodate
older x86 platforms that don't allow writing to SPI flash when early
stages are running XIP from flash. If
BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES is not selected,
BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY will get auto-selected if
BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y. This allows for current platforms
that write to flash in the earlier stages, assuming that they have
that capability.
BUG=b:150502246
BRANCH=None
TEST=diff the coreboot.rom files resulting from running
./util/abuild/abuild -p none -t GOOGLE_NAMI -x -a --timeless
with and without this change to make sure that there was no
difference. Also did this for GOOGLE_CANDY board, which is
baytrail based (and has BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES
enabled).
Change-Id: I3aef8be702f55873233610b8e20d0662aa951ca7
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45740
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
While restructuring the mainboard directory, it was forgotten to add the
variant specific romstage.c to the build. Therefore, add romstage.c to
the Makefile fixing the raminit.
Change-Id: I7afbf1574803128f7d62592eed2398c945334757
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45928
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
APEI (ACPI Platform Error Interface) defines BERT (Boot Error Record
Table) memory region:
* Bootloader (firmware) generates UEFI CPER (Common Platform Error
Record) records, and populates BERT region.
* OS parses ACPI BERT table, finds the BERT region address, inteprets
the data and processes it accordingly.
When CONFIG_ACPI_BERT is defined, update FSP UPD BootLoaderTolumSize,
so FSP allocates memory region for it. The APEI BERT region is placed
on top of CBMEM, for the size of CONFIG_ACPI_BERT_SIZE.
Apart from APEI BERT region, we also have plan to add APEI HEST region
which holds OS runtime hardware error record, based on firmware
first hardware error handling model. HEST region will be reserved
same way as BERT region.
Note that CBMEM region can not be used for such purpose, the OS
(bert/hest) drivers are not able to access data held in CBMEM region,
as CBMEM is set as type 16 (configuration table).
An option considered was to reserve the BERT region under CBMEM.
However, we do not know the size of CBMEM till acpi tables are set up.
On the other hand, BERT region needs to be filled up before ACPI BERT
table is finalized.
Change-Id: Ie72240e4c5fa01fcf937d33678c40f9ca826487a
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45391
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
BUG=b:153888802
TEST=Able to list correct PCH revision, SPI/eSPI frequency as per
ADL SPI flash guide.
Without this CL :
PCH Revision: 500 series Tiger Point
With this CL :
PCH Revision: 500 series Tiger Point/ 600 series Alder Point
Change-Id: I0faf0f0fdb625ff82eb0033b5b77e6470971bc23
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
- Enable DDC pins for DDI-B
- Enable HPD pins for DDI-1/DDI-2
- Update MPHY/USB2 Mapping to match with the TGL-Y RVP schematic
BUG: System not able to detect displays attached to onboard micro-HDMI or Type-C connectors
TEST: hot-plug/unplug HDMI displays with onboard micro-HDMI connector and USB Type-C connectors to make sure the displays get detected and enabled
Change-Id: I08a1b16a8fa45cf0f366661395b9f2aa25c44935
Signed-off-by: Jason Le <jason.v.le@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The kernel guys have found that automatic link training from this bridge
can occasionally fail and needs to be retried. They have added up to 10
retries just to be sure, so let's do the same in coreboot.
BUG=b:169535092
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I713b6851bd51d3527ed4c6e6407dee6b42d09955
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45882
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Configure EMMC_RESET_L (GPIO68) to drive high by default. As per JEDEC
specification for eMMC, RST_n_FUNCTION defaults to temporarily disable
reset using RST_n signal (which is connected to EMMC_RESET_L on
zork). Chrome OS platforms do not configure RST_n_FUNCTION thus making
the reset signal unused. The spec also says that there are no internal
pulls on the card and hence the RST_n signal should be driven
appropriately to prevent the input circuits from flowing unnecessary
leakage current.
Thus, even though the line remains unused, since it is connected in
hardware, this change drives EMMC_RESET_L to high.
BUG=b:169222156
BRANCH=zork
TEST=emerge-zork coreboot
eMMC DUT reboot/suspend x100 iterations pass
Change-Id: I9feb826eec8a8cdad5e2bd7efcbb1dcf96185dfd
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45756
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This fix needs to go into ACPI in the long-term, but this
should suffice in the short-term.
BUG=b:158087989
TEST=Boot berknip, verify backlight is enabled. Test suspend
& resume sequence, backlight is still enabled.
BRANCH=Zork
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I6ecc3c9e397c9756a78e480d3f639c507879a0ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45854
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Even though the devicetrees of Mandolin and Cereme are relatively
similar, they are kept as separate files instead of using devicetree
overrides to facilitate creating mainboard ports based on those CRBs.
The two boards are reference boards for different zen/zen+ APU platforms
that share the silicon, but use different packages. This is also
consistent with the google/zork boards that have two different full base
devicetrees for the two different platforms and then use devicetree
overrides for the different variants of the two reference designs.
BUG=b:159617786,b:169644059
BRANCH=zork
Change-Id: Ief8a05b0a360563d26a81941720b78014feb0d25
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42786
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With this change the flash addresses will only get transferred over one
data pin like in the non-quad SPI mode and only the data will get sent
over all four data pins. Since this gives the flash chip a bit more time
to fetch the data the host requested, this allows higher SPI frequencies
resulting in a higher throughput when bigger chunks of memory get read.
BRANCH=zork
Change-Id: Iad4c922ffcdba4b17e6e81244ff37302eb171d97
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45831
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The PSP will be adding information into these fields after verstage
runs. This allows data to be passed directly to coreboot very early
in the boot process.
BUG=b:168895748
TEST=None
Branch=Zork
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: Idbd1dfece59e99f6f15dfd8d002529ea6417cdbe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45803
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This patch updates the SLP_Sx assertion widths and power cycle duration
for volteer.
Power cycle duration:
With default value,
S0->S5 -> [ ~4.2 seconds delay ] -> S5->S0
With value set to 1,
S0->S5 -> [ ~1.2 seconds delay ] -> S5->S0
BUG=b:159108661
TEST=Verified that the power cycle duration is 1~2s with a global reset
on volteer.
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Change-Id: Idf4e0c3a60b4ac59e31df1357f2ff28f195ff17f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44559
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Size_t seems to have a compiler dependency. When building on the
Purism librem 15v4, size_t is 'unsigned long'. In this instance,
the compiler is the coreboot configured cross-compiler. In another
instance, size_t is defined as 'unsigned short'. To get around
the formatting conflict caused by this, The variable of type
size_t was cast as 'unsigned int' in the format.
Change-Id: Id51730c883d8fb9e87183121deb49f5fdda0114e
Signed-off-by: Eugene D Myers <cedarhouse@comcast.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45181
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: ron minnich <rminnich@gmail.com>
The patch incorporates the STM build as a part of the coreboot
build. A separate patch lists and documents the options that
the developer can use. In most cases the default options will
suffice.
Change-Id: I8c6e0c85edd4e2b0658791553bd9947656e8c796
Signed-off-by: Eugene D Myers <cedarhouse@comcast.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: ron minnich <rminnich@gmail.com>
The appropriate way to print a u64 variable regardless of the current
architecture is to use the PRI*64 macros. libpayload is mostly used
in 32 bits but when ported to other projects and compiled in 64 bits
it breaks the compilation.
Change-Id: I479fd701f992701584d77d43c5cd5910f5ab7633
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Converts bit fields macros to target PAD_CFG_*() macros. To do this,
the following command was used:
./intelp2m -n -t 1 -file ../../src/mainboard/51nb/x210/gpio.h
This is part of the patch set
"mb/51nb/x210/gpio: Rewrite pad config using intelp2m":
CB:43566 - 1/4 Decode raw register values
CB:43567 - 2/4 Exclude fields for PAD_CFG
CB:43568 - 3/4 Fixes PAD_RESET to convert to PAD_NC()
CB:43410 - 4/4 Convert field macros to PAD_CFG
Tested with BUILD_TIMELESS=1, 51NB-X210, remains identical.
Change-Id: I18c0c321561eee04ff927681b0a231f6d79c63e2
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43410
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
`option.c` was already linked into verstage but needs `mc146818rtc.c`
to work. While we are at it, also make use of the `all` target.
Change-Id: I8f545e036962ed0716bcd3b9a5b5d06e18a367f6
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45802
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To get the HDA verbs from the OEM firmware, open the firmware with
UEFITool, search for the existing HDA verbs, extract the UEFI module
and look for the verbs. Copy the consecutive 4 dword sets that look
like HDA verbs.
It is tested to make audio output from both the speaker and headphone
work.
Change-Id: Ie359fdf6785b1c0be8dc201cd76176c0a7fe7942
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45693
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The default GPIO values for camera power were set as 1 so the LED was
turned on by default when the board is powered on.
This status is kept until the camera is probed then being turned off.
So the LED is turned on for a few seconds during the boot up.
By setting the default power to 0, the LED is lit only when camera
is turned on for probing and this should be just a blink.
BUG=b:167635396
BRANCH=none
TEST=Build and boot volteer board. Monitor camera privacy LED
and check it is not lit more than 0.5 seconds.
Signed-off-by: Daniel Kang <daniel.h.kang@intel.com>
Change-Id: Ic7df391aa512daafe6e1ce49e9222b90e17ad806
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45058
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
cameras
There is a patch https://lkml.org/lkml/2020/9/3/235 which allows i2c
device can support driver probe without power up the device.
In order to support this, need add coreboot add
"i2c-allow-low-power-probe" property.
BUG=b:169058784
BRANCH=none
TEST=Build and boot volteer board. Monitor camera privacy LED
and check it blinks. It should not blink.
Signed-off-by: Daniel Kang <daniel.h.kang@intel.com>
Change-Id: I46f90ff8d412b18c7ee4bd7f22f9a7db771eb84f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This fixes non-emulation platforms as those are using 32bit code
after the bootblock_crt0 entry, like setting up CAR and updating
microcode, which isn't yet converted to support long mode.
This is a noop for the only supported x86_64 platform and all
x86_32 platforms.
Change-Id: I45e56ed8db9a44c00cd61e962bb82f27926eb23f
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37370
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This change allows treating the PMC as a 'hidden' PCI device on
JasperLake, so that the MMIO & I/O resources can be exposed as
belonging to this device, instead of the system agent and LPC/eSPI.
Original patch for jasperlake SoC here:
CB:42018
This change was missing for JasperLake rvp board.
TEST=Checked PMC init function is called and also checked PCI resource
for PMC device 1f.2.
Change-Id: I7531d32c62d3f9735938f744f2892ab9c9bebddf
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45793
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Using bincfg, generate Intel 82579LM GBE region firmware.
* Intel 82579LM is used in Lenovo models including x220 and x230.
* PXE is disabled.
* Intel 82579V variant could be generated with a few modifications to
set. Noted in set file comments.
Change-Id: I377cbe2f77f2aef39f452dc6511a0ea6b2015963
Signed-off-by: Tom Hiller <thrilleratplay@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
They should be tuned per board to get the best signal and boot time.
This fixes the HS400 preset, so it's correctly set to A. It also changes
the SDR50 and DDR50 presets to B. We can't boot correctly when DDR50 is
set to A.
I chose 1 as the init kHz value since that's what depthcharge uses to
calculate the init clock.
BUG=b:159823235
TEST=Boot Ezkinil and dump SDHCI preset registers.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ie2f3497b65d771820ab1a803fec73265547f8906
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
This allows passing in the presets to FSP.
I will set the UPD values after all the zork boards have had their
presets correctly set. This way we don't override the UPD defaults with
0s.
BUG=b:159823235
TEST=Build test
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I44951cacb1e9d788016a70283cf9688bf88a09f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45097
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Add ACPI name for CSTACK. The name is PC00 to match with ACPI table
generated.
The PCIe domain has multiple PCIe stacks. devicetree.cb at the moment
does not support multiple PCIe stacks, eg. IIO stacks. For now, assign
the name to PCIe domain. In future, the name needs to be assigned to
CSTACK.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I24a6f29734452426218419cdcf66702edde96f46
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45591
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Add ACPI name for LPC device. The name matches with what is in
soc/intel/common/block/acpi/acpi/lpc.asl.
Since several Intel SOCs select CONFIG_SOC_INTEL_COMMON_BLOCK_LPC,
remove duplicated acpi name assignments.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: If418c83caafe5d9e2af135a8946cbe5eb687b9ef
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45590
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Intel CPX-SP FSP ww38 release made some changes to FSP-M header
file. Those changes do not need corresponding soc code change.
TESTED=built image with ww38 FSP RELEASE binary, booted DeltaLake
DVT to target OS.
Change-Id: I320c4a674f9f4d37c30ce6df510f18ad1ae057eb
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45634
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Add Thread Count in SMBIOS type 4 "Processor Information".
Modify Thread Count 2 according to SMBIOS spec, it should
be the number of threads per processor socket.
TEST="dmidecode -t4" to check.
Signed-off-by: Francois Toguo <francois.toguo.fotso@intel.com>
Change-Id: I0e00ba706eecdc850a2c6a4d876a7732dcc8f755
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45564
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
In case of 64K bootblock the pagetables don't fit, as the CBFS header
also needs a few bytes.
Fixes build error on platforms that use 64KiB bootblock.
Tested on Lenovo T410 with additional x86_64 patches.
Change-Id: I854c5f575e2376827a366cca8d25682c4d90bc8f
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37394
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some Librem Minis exhibit issues with 6Gbps SATA operation on certain
SSDs, setting the Receiver Equalization Boost Magnitude adjustment
resolves this, so limiting SATA speeds to 3Gbps is no longer needed.
Test: build/boot Librem Mini with Crucial SATA SSD, observe no issues
booting, no ATA-related errors in dmesg on PureOS 10 / kernel 5.8.7
Change-Id: I8b3cbcff7f181bcab35d71e859033578c822bb20
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45696
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Some Librems have issues with 6Gbps SATA operation on certain
SSDs, setting the Receiver Equalization Boost Magnitude adjustment
resolves this.
Test: build/boot Librem 15v3 with Crucial SATA SSD, observe no issues
booting, no ATA-related errors in dmesg on PureOS 10 / kernel 5.8.7
Change-Id: I078deeff7fc54694393b5b16c41c5d622b332781
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45695
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Adds a new port for the Aspire G43T-AM3. It is from an Aspire M3800
desktop model of which I only own the mainboard. The silkscreen label
calls it "G45T/G43T-AM3 V:1.0". In DMI data it is additionally called
Acer EG43M.
The Aspire M5800 model seems to use the same mainboard. The BIOS you can
download from Acer is identical for both.
Various similar mainboards by Acer exist: G41T-AM, G43T-AM, G43T-AM4,
Q45T-AM, to name a few. ECS has some models that are obiously based on
the same design, e.g. G43T-WM and G43T-M.
This model is a microATX-sized board with an LGA 775 socket, four DDR3
DIMM slots, one PCIe x16 slot, one PCIe x1 slot and two PCI slots based
on the Intel G43 chipset.
The port was started by copying mb/intel/dg43gt (not going to lie here)
and adapting things by looking at dumps from the system when running
with the vendor BIOS. Serial console output is possible by soldering to
a point at the corresponding Super I/O pin.
The service manual for the board was helpful for setting the correct PCI
IRQ links. It can be found publicly on the internet as the "Acer Aspire
M3800 Service Manual".
Working:
- CPUs from Pentium Dual-Core E2160 to Core 2 Quad Q9550 at FSB1333
- Native raminit
- All four DIMM slots at 1066 MHz (tested 2x2GB + 2x4GB)
- PS/2 mouse
- PS/2 keyboard (needs CONFIG_SEABIOS_PS2_TIMEOUT, tested: 500)
- USB ports (8 internal, 4 external)
- All six SATA ports
- Intel GbE
- Both PCI ports with various cards (Ethernet, audio, USB, VGA)
- Integrated graphics (libgfxinit)
- HDMI and VGA ports
- boot with PCIe graphics and SeaBIOS
- boot with PCI VGA and SeaBIOS
- Both PCIe ports
- Flashing with flashrom
- Rear audio output
- SeaBIOS 1.14.0 to boot slackware64
- SeaBIOS 1.14.0 to boot Windows 10 (needs VGA BIOS)
- Temperature readings (including PECI)
- Super I/O EC automatic fan control
- S3 suspend/resume
- Poweroff
Not working:
- Resource issues with the VGA BIOS of a PCI rv100-based card
- Super I/O voltage reading conversions
Untested:
- The other audio jacks or the front panel header
- On-board Firewire
- EHCI debug
- VBT (was extracted and added, but don't know how to test)
- Super I/O GPIOs
Signed-off-by: Michael Büchler <michael.buechler@posteo.net>
Change-Id: I846cf5f4f1ef27fc644676a4c6f7a333e061f6cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44167
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Add DTT (Dynamic Tuning Technology) support for Tiger Lake based rvp board.
Set power limits and CPU sensor thresholds for DTT based thermal control.
BRANCH=None
BUG=None
TEST=Build and boot on tglrvp board
Change-Id: I0dbee370b8dc9e1e3ae6f1a1101047ac6fd76f53
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
For mainboards using the HP KBC1126 EC interface, but with a different
EC implementation, we don't put the EC firmware in the CBFS image. Add
a Kconfig option to prevent the build system warning on not inserting
the EC firmware.
After this change, building coreboot for EliteBook Folio 9480m will
not have a warning on not inserting the EC firmware.
The build system still builds a working coreboot image for EliteBook
2560p, and gives a warning if not choosing to insert the EC firmware.
Change-Id: I3be83a13d138d3623064ef2803f3e3a340207ead
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45575
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
With commit f2eb687d19 (soc/intel/{cnl,icl,skl,tgl,common}: Make
changes to send_heci_reset_req_message()) the return value was
changed on a single path. Update the other paths too, even though
it's the discouraged 0-is-failure.
Change-Id: I179a6a4b1e13565dd58c908eb2a9725052a4de9d
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
update the telemetry setting for second SDLE testing(for APU power adjusting).
Those values are used to power calibration the APU power and achieving
the best performance.
BUG=b:160698427
BRANCH=zork
TEST=emerge-zork coreboot
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I4cf5b8f090befd6a3c4990f44f2f200bc66aa1f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44804
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Coverity detects calling function spi_sdcard_do_command without checking
return value. Fix this issue by checking return value for error
handling.
Found-by: Coverity CID 1407737
TEST=None
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Ie0d28806b5c0b4c6d509e583d115358864eeff80
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45620
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Current implementation uses CPUID 0Bh function that returns the number
of logical cores of requested level. The problem with this approach is
that this value doesn't change when HyperThreading is disabled (it's in
the Intel docs), so it breaks generate_cpu_entries().
- Use MSR 0x35 instead, which returns the correct number of logical
processors with and without HT.
- Rename the function to get_logical_cores_per_package, which is more
accurate.
Tested on ThinkPad X220 with and without HT.
Related to CB:29669.
Change-Id: Ib32c2d40408cfa42ca43ab42ed661c168e579ada
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
These parts have not been used in any vilboz devices. Removing
so IDs can be assigned more efficiently.
Command to generate files:
go build gen_part_id.go
local variant=vilboz
./gen_part_id ../../../src/mainboard/google/zork/spd ../../../src/mainboard/google/zork/variants/${variant}/spd/ ../../../src/mainboard/google/zork/variants/${variant}/spd/mem_parts_used.txt
BUG=b:165611994
TEST=none
Change-Id: I99614acaf45db0556120c883577494d9f753ea12
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45679
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Morphius has SSD/eMMC SKU, we should turn off eMMC
if storage is NVMe SSD.
BUG=b:169211959
BRANCH=zork
TEST=1. emerge-zork coreboot
2. Check eMMC is enabled or disabled based on the eMMC bit in
FW_CONFIG.
Change-Id: I67d5d77ce3d827ae89b82529de59925f67eaf894
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45755
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
While we're at it, fix up cosmetics on a few comments. The GADD method
seems to suffer from copy-paste symptoms. A follow-up will address this.
Some methods deliberately remain untouched in this commit, so as not to
collide with another patch train that already takes care of them.
Tested with BUILD_TIMELESS=1, Intel Ice Lake U RVP does not change.
Change-Id: I613f5f65638b92ca23f3ce15a15dd063afa52c31
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
While we're at it, fix up cosmetics on a few comments.
Some methods deliberately remain untouched in this commit, so as not to
collide with another patch train that already takes care of them.
Tested with BUILD_TIMELESS=1, Purism Librem 15v4 does not change.
Change-Id: Ib27c5b48459e3ea7eabc34457cb204994ee9b617
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45691
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch moves gpio_op.asl into common block acpi directory to
avoid duplicating the same ASL code block across SoC directory.
TEST=Able to build and boot TGL, CNL and CML platform.
1) Dump and disassemble DSDT, verify all methods present inside
common gpio_op.asl like GRXS, GTXS etc. are still there.
2) Verify no ACPI error seen while running 'dmesg` from console.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I248f5e66994d2f3d6b0bd398347e7cf9ae7f2cc6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
TEST=Able to build and boot EVE platform.
1) Dump and disassemble DSDT, verify unified methods like GRXS,
GTXS etc. are there
2) Verify no ACPI error seen while running 'dmesg' from console
3) abuild --timeless to ensure there are no other functional changes.
Change-Id: I02df3ddf5ad33d42d97feefb0fa366ad8c856565
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45681
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
TEST=Able to build and boot ICLRVP platform.
1) Dump and disassemble DSDT to ensure GRXS function implementation
remain unchanged prior and after this CL.
2) Verify no ACPI error seen while running 'dmesg' from console.
3) abuild --timeless to ensure there are no other functional changes.
Change-Id: Iab4690341bc3da5d8eb249da4d407d84f7d4e706
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45680
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Also drop gpio_common.h in favor of intelblocks/gpio_defs.h macros.
TEST=Able to build and boot CNL and CML platform.
1) Dump and disassemble DSDT, verify unified methods like GRXS,
GTXS etc. are there.
2) Verify no ACPI error seen while running 'dmesg' from console.
3) abuild --timeless to ensure there are no other functional changes.
Change-Id: I78d712eeba56b9c098dc6a6f11e4e51cb2529b10
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45654
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
BOOTBOOT is a multi-platform, architecture agnostic boot protocol.
The protocol describes how to boot an ELF64 or PE32+ executable inside
an initial ram disk image into clean 64 bit mode. This version uses
libpayload to do that. Depending on the lib's configuration, initrd
can be in ROM as a cbfs file or a Flashmap partition; on disk a GPT
partition or a file on a FAT formatted ESP partition.
For more information see https://gitlab.com/bztsrc/bootboot
Change-Id: I8692cde0730338026a7760a293c1e37f66004bc0
Signed-off-by: Zoltan Baldaszti <bztemail@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45482
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
With MAX_CPUS==1, this has the effect of removing spinlock
implementation. But since is_smp_boot() evaluates false and
SMM uses separate smi_semaphore, there is no concurrency to
protect against with a spinlock.
Change-Id: I7c2ac221af78055879e7359bd03907f2416a9919
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43865
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Looks like the option is generally not compatible with
garbage collections. Nothing is inlined, is_smp_boot()
no longer evaluates to constant false and thus the symbols
from secondary.S would need to be present for the build
to pass after we set SMP=n.
Change-Id: I1b76dc34b5f39d8988368f71a0a2f43d1bc4177e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43817
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Nearly every x86 platform uses the same arch for all stages. The only
exception is Picasso. So, factor out redundant symbols from the rest.
Alder Lake is not yet complete, so it has been skipped for now.
Change-Id: I7cff9efbc44546807d9af089292c69fb0acc7bad
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45731
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Add code to generate p-state and c-state SSDT objects to coreboot.
Publish objects generated in native coreboot, rather than the ones
created by FSP binary.
BUG=b:155307433
TEST=Boot morphius to shell and extract and compare objects created in
coreboot with tables generated by FSP. Confirm they are equivalent.
BRANCH=Zork
Change-Id: I5f4db3c0c2048ea1d6c6ce55f5e252cb15598514
Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45340
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
It primarily contains definitions for MMIO windows. Also, remove
includes from files not directly using the definitions it contains.
Tested with BUILD_TIMELESS=1, Asus P5QL PRO remains identical.
Change-Id: Id28080d9b2924463dd3720492d5e717d65fa0071
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45419
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Create the boldar variant of the volteer reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.2.0).
Add "memory/Makefile.inc" generated by gen_part_id.go
BUG=b:162202257
BRANCH=None
TEST=util/abuild/abuild -p none -t google/volteer -x -a
make sure the build includes GOOGLE_BOLDAR
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Change-Id: I92b4b917448d8e5e9176cb983adf7b209956d2c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45648
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
When the declaration is done after the default, menuconfig will see that
symbol defined at the first place where kconfig tool will find it.
For example, if we run menuconfig and search for 'MAINBOARD_VENDOR', we
will see it defined at ""src/mainboard/51nb/Kconfig" which is odd.
Change-Id: I215a1817e60e6deb6931679f139d110ba762d3c8
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Migrate ASL helper function like GRXS, GTXS, STXS, CTXS to ASL 2.0
syntax across CNL, ICL, JSL, SKL.
TEST=Able to build and boot Hatch, EVE and ICLRVP platform.
Dump and disassemble DSDT to ensure GRXS,GTXS etc functions
implementation remain unchanged prior and after this CL.
Change-Id: I0ebf1f86031eae25337d2dbeabb8893d9f19a14b
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45677
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
LPDDR4x has 6 CA PINs, but for some 8GB LPDDR4X DDR, the left margin
of some CA PIN window is too small than others. Need to enable the CA
perbit mechanism to avoid those risks.
BUG=none
BRANCH=kukui
TEST=Boots correctly on Kukui
Change-Id: I58e29d0c91a469112b0b1292da80bcb802322d47
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41965
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Clevo mainboards can be grouped by their common platform. Therefore,
restructure the mainboard directory as a first step, so that the variant
mechanism is used.
This moves most of the code into the variant dir, since the L140CU is
the only variant at the moment.
Change-Id: I9ad1c06f9db854cac1dd420c53dc0c9f010ed716
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45664
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change enables CnviBtAudioOffload. FSP is invoked to configure
BT over USB and BT I2S pins for cAVS connection.
BUG=b:169045123
TEST=Verifed CnviBtCore and CnviBtAudioOffload settings and FSP
configuration. Booted up to kernel on Volteer.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I1780da0824d145a79743d5cffdea4821236d4f74
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45586
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Naveen M <naveen.m@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
We need at least one SPD in SPD_SOURCES when creating a new variant
of trembyle or dalboz, or else coreboot won't build. Add the empty
DDR4 SPD so that we can build the new variant.
Add an empty mem_parts_used.txt so that the developer can add the
supported memory parts and regenerate spd/Makefile.inc using
spd_tools.
BUG=b:169199396
TEST=create a new variant of dalboz or trembyle and observe that
the build succeeds.
Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org>
Change-Id: I764690c76529780186d0a1d156a623821f9d6972
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Previously, SMBUS support was not required for Apollo Lake, since the
SPD was read inside FSP-M, during memory initialization. However, the
Kontron mAL-10 COMe module contains Nuvoton HWM chip that is connected
to the processor via SMBUS. This patch adds SMBUS common driver support
for Apollo Lake to initialize this HWM.
TEST = After loading the nct7802 module on the Kontron mAL-10 with Linux
OS, we can read the hwm registers, see temperature and fan speed:
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +52.0°C (high = +110.0°C, crit = +110.0°C)
Core 0: +52.0°C (high = +110.0°C, crit = +110.0°C)
Core 1: +52.0°C (high = +110.0°C, crit = +110.0°C)
Core 2: +53.0°C (high = +110.0°C, crit = +110.0°C)
Core 3: +53.0°C (high = +110.0°C, crit = +110.0°C)
nct7802-i2c-0-2e
Adapter: SMBus CMI adapter cmi
in0: +3.35 V (min = +0.00 V, max = +4.09 V)
in1: +1.92 V
in3: +1.21 V (min = +0.00 V, max = +2.05 V)
in4: +1.68 V (min = +0.00 V, max = +2.05 V)
fan1: 0 RPM (min = 0 RPM)
fan2: 1729 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
temp1: +53.5°C (low = +0.0°C, high = +85.0°C)
(crit = +100.0°C) sensor = thermistor
temp4: +53.0°C (low = +0.0°C, high = +85.0°C)
(crit = +100.0°C)
temp6: +0.0°C
Change-Id: I408ef84ede27a45fb057e22b2757fa6e66277ddd
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44475
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Copy system76/lemp9 to clevo/l140cu, since it's a Clevo notebook
actually and both have the same mainboard.
This commit is meant to create a working copy for clevo/l140cu. The only
changes are names. Further patches will follow to make this mainboard
more generic.
Since system76/lemp9 is based on System76's EC firmware, EC stuff does
not work correctly yet. This will be fixed in another patch.
Tested on TUXEDO InfinityBook S 14 v5 and PCZ Lafité Pro 14.
Change-Id: I7c2993256fd9123a8013df5ba8292ea1ead10f74
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45624
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Parse the generated fmap_config.h file instead of the .fmd file supplied
by the board to determine the size and location of the APOB region.
Parsing the generated file allows to write .fmd files without having to
take into account that the shell script part in Picasso's Makefile.inc
can only parse a subset of the .fmd syntax.
BUG=b:157068645
TEST=Timeless build for amd/mandolin resulted in identical binary.
BRANCH=zork
Change-Id: I6ed1903a8157374d78d2865621baa15774d2a7d7
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45595
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add defines for the start and size of the FMAP sections to the
optionally generated header file. For the defines the name of the
corresponding FMAP section is used without the full path, since every
section name should be unique anyway as documented here:
Documentation/lib/flashmap.md
BUG=b:157068645
TEST=Generated header file contains expected defines.
BRANCH=zork
Change-Id: Ie31161cfd304b69a3cb4bb366bf365d979e77c64
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
One bit wide bitfields should always be unsigned, since they can only be
either 0 or -1, but never 1 which is assigned to that bit field in some
cases. Making this unsigned allows it to have the values 0 or 1 which is
what we want there.
BUG=b:157068645
BRANCH=zork
Change-Id: I99c236df583528848b455ef424504e6c2a33c5d6
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45593
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
set DPTC power parameter per clamshell/tablet mode
after EC OP region is accessible.
BUG=b:157943445
BRANCH=zork
TEST=1. emerge-zork coreboot
2. power on DUT in tablet mode then check "thermctl_limit"
will change automatically
Change-Id: Ic3e1119881790c34f5649986334b4e3cecafc02b
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45580
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
ACPI tables are generated at runtime for camera components. Remove
the static ASL file.
BUG=b:168755528
TEST=create a new variant of Waddledoo and observe that the build
succeeds.
Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org>
Change-Id: Ie9e3d5856d5e95562df03814ab31e4e79a40a968
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45629
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Convert gpio.h to a compacter, cleaner format by keeping gpios in a
single line, where possible.
This was done with the following fancy vim regex replacement commands.
(Neither sed, nor awk multiline matching syntax are friends with me...)
Just open src/mainboard/system76/lemp9/gpio.h with vim, type : before
pasting each command, press enter and see how the format changes.
g#^\t//#d
%s/^\t\t/\t/
g/PAD_.*$\n\n[^/]/s/\n//
g#// NC#d
%s#^\t// \(.*\)\n\t// \(.*\)#\t// \1 \2#g
%s#^\t// \(.*\)\n\t\(PAD_.*,\)#\t\2\t\t/* \1 */
%s#^// \(GP.*\)#\t/* ------- GPIO Group \1 ------- */#
Finally some indents and multiline comments need to be fixed manually.
Test: images built with TIMELESS do not differ.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I9054274dc4c8942935b6a4789bfc1547dd3d4017
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43652
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Add new generic helper functions for PSS, PCT, XPSS, objects.
BUG=b:155307433
TEST=Boot Morphius and dump SSDT. Confirm PSS and PCT objects appear
as expected and conform to ACPI_6_3_May16.pdf ACPI specification.
Check XPSS against Microsoft "Extended PSS ACPI Method Specification"
XPSS_spec.doc April 2, 2007.
BRANCH=Zork
Change-Id: I1ea218bcee33093481e82390550ff96d9d2cb8b5
Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45437
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Enable processor thermal control using PCI dev path function instead of
Device4Enable parameter in devicetree. This change removes the dependency
on Device4Enable in devicetree. We can enable and disable this thermal
control using on and off support with PCI device entry in devicetree.
BRANCH=None
BUG=None
TEST=Built and tested on dedede board
Change-Id: I0463236996ad001af506c9966840b27fe44d60d2
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45454
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
bootblock_main_with_timestamp function allows to proceed with existing
timestamp table. Apparently we never needed this, but Zork runs verstage
in the PSP before bootblock.
It'd be useful if we can grab timestamps for verstage from PSP and
merge with coreboot timestamps. Making it non-static will enable us to
do that.
BUG=b:154142138, b:159220781
BRANCH=zork
TEST=build firmware for zork
Change-Id: I061c3fbb652c40bafa0a007aa75f2a82680f5e0a
Signed-off-by: Kangheui Won <khwon@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45468
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Verstage in PSP used stub for timestamps since we didn't know about
clock. Now we figured out clock source so we can enable timestamp
functions.
BRANCH=zork
BUG=b:154142138, b:159220781
TEST=build without CONFIG_PSP_VERSTAGE_FILE, flash and boot
Change-Id: I431a243878e265b68783f54ee9424bb1d4fe03c1
Signed-off-by: Kangheui Won <khwon@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45467
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Some chips can read external temperature sensor values only to TMPIN3.
These use EC register 0x55, bit 7 to enable that. This patch adds
support for this. It is called "old PECI" by lm_sensors [0].
Other chips can read to any TMPIN[1-3] which is configured in EC
register 0x51 like the other temperature sources. This was the only
supported method. This patch adds a Kconfig option to indicate this
variant.
This patch was tested on an Acer Aspire M3800 which has an IT8720F that
reads the CPU temperature via PECI. It allows the automatic fan control
feature of the Super I/O to work.
Overview of support per chip in the coreboot tree, determined from
reading the publicly available datasheets or lm_sensors, if noted:
Old PECI:
* IT8718F
* IT8720F
* IT8781F, IT8782F, IT8783E/F
Normal PECI:
* IT8721F (exception: no PECI to TMPIN2)
* IT8728F
* IT8772E (uses separate code in coreboot, not superio/ite/common)
* IT8786E
* IT8613E, IT8623E (lm_sensors)
[0] Linux kernel 5.4.48, drivers/hwmon/it87.c
Signed-off-by: Michael Büchler <michael.buechler@posteo.net>
Change-Id: Iab7115852437d46c9b1269bba61ffcf680fe5a6a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44168
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Add CONFIG_FSP_STATUS_GLOBAL_RESET Kconfig to get correct FSP global
reset type from respective SoC Kconfig.
Supported value: 0x40000003-0x40000008, These are defined in FSP EAS
v2.0 section 11.2.2 - OEM Status Code
Unsupported value: 0xFFFFFFFF
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: Idc04eb3a931d2d353808d02e62bd436b363600d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
List of changes:
1. Rename do_global_reset() to force_global_reset()
2. Make force_global_reset() function static
3. Implement force_global_reset() into common/reset.c to avoid
dedicated SoC implementation
4. Remove redundant force_global_reset() implementation from
dedicated SoC
5. Make direct call to global_reset() from cse_lite.c
7. Drop CONFIG_HAVE_CF9_RESET_PREPARE Kconfig from APL SoC due
to common reset (soc/intel/common/reset.c) code migration
8. Remove unused function send_global_reset() from SKL me.c due
to common reset code migration
9. Delete heci.c from APL SoC as unused
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I1c5dc8d5606ef28ffaed4a64d90f470ae1ffc2a6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45541
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
get_prmrr_size does not return the actual PRMRR size but a valid PRMRR
size with repect to the users choice in Kconfig. Thus, rename it from
`get_prmrr_size` to `get_valid_prmrr_size` to avoid confusion about what
it does.
Also fix the broken comment in cpulib.h.
Change-Id: Id243be50acb741f2c3118ddde082743d08983a53
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Since PRMRR size can only be set when SGX is enabled and since SGX
depends on PRMRR size >= 32MB, any lower setting (including "Disabled")
is invalid. Drop these settings.
Change-Id: If7a19c7223a0de2e03b7df9184cddf7c9fc87a68
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Defer cse_fw_sync to BS_DEV_RESOURCES boot state so that MRC training
data can be cached before CSE FW Sync and a second MRC training can be
avoided.
BUG=b:168850641
TEST=Build and boot the waddledoo board to OS. Ensure that the memory
training is performed only once.
Change-Id: I0ef5693eaa6ed34dc08c94e5db153f4295578f5f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Enhanced Intel SpeedStep Technology (EIST) and Intel Speed Shift
Technology (ISST) - also know as HWP - are two independent mechanisms
for controlling voltage and frequency based on performance hints.
When HWP is enabled, it overrides the software-based EIST. It does not
depend on EIST, though, but can be enabled on its own.
Break up that currently existing dependency in ACPI generation code.
It was tested that HWP can be enabled and gets used by the Linux pstate
cpufreq driver. With HWP disabled, the frequency does not decrease, even
not in powersave mode. After enabling HWP the frequency changed in
relation to the current workload. (Test device: Acer ES1-572)
Change-Id: I93d888ddce7b54e91b54e5b4fdd4d9cf16630eda
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44137
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The pre-RAM CBMEM console is tiny. Do not fill it with largely redundant
information, when we could instead store more useful raminit debug logs.
Change-Id: I3a93fdeb67b0557e876f78b12241b70933ad324d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45499
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This is to enable Intel ME communication interface HECI1 by
devicetree for PAVP with CSE Lite.
PAVP feature is enabled with CSE Lite SKU for Chrome and HECI1 interface
is required between kernel and CSE Lite.
BUG=None
TEST=Build and boot tglrvp. Run lspci and check pcie device
00:16.0 Communication controller: Intel Corporation Device a0e0
Change-Id: I23117fa96503942e6a72765dd3fd1cc762e3f705
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42307
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Coverity detects variable dsd going out of scope leaks the storage it
points to. Move dsd resource allocation after sanity check for
config->nvm_compact to avoid leak.
Found-by: Coverity CID 1432727
TEST=Built and boot up to kernel on Volteer.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I86af322dc78845b8b312b6815135336c2c56b4dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45531
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Adds support for loading Linux kernels through FIT payloads. This has
been implemented as an assembly function in order to simplify dealing
with some of the intricacies of loading a kernel (such as needing to
jump to the kernel in ARM mode and the kernel ABI).
TEST: Booted a FIT image containing a 5.4 kernel and initramfs on the
Beaglebone Black.
Change-Id: I7dbf9467665ec17447cec73676763844b4be4764
Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45335
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Fix this bit field to convert to target macros PAD_NC() macros.
This is part of the patch set
"mb/51nb/x210/gpio: Rewrite pad config using intelp2m":
CB:43566 - 1/4 Decode raw register values
CB:43567 - 2/4 Exclude fields for PAD_CFG
CB:43568 - 3/4 Fixes PAD_RESET to convert to PAD_NC()
CB:43410 - 4/4 Convert field macros to PAD_CFG
Change-Id: I73a3d78457c1e50dc9625a47394e340181516696
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43568
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch excludes bit fields that must be ignored (1,2) in order
to convert current macros to target PAD_CFG_*() macros. The following
commands were used for this:
./intelp2m -fld cb -ign -t 1 -file ../../src/mainboard/51nb/x210/gpio.h
- ignore RO bit fields;
- ignore RX Level/Edge Configuration (bit 26:25) and RX/TX Buffer
Disable (bit 9:8) for the native function, because it does not
affect the pad in this mode.
This is part of the patch set
"mb/51nb/x210/gpio: Rewrite pad config using intelp2m":
CB:43566 - 1/4 Decode raw register values
CB:43567 - 2/4 Exclude fields for PAD_CFG
CB:43568 - 3/4 Fixes PAD_RESET to convert to PAD_NC()
CB:43410 - 4/4 Convert field macros to PAD_CFG
Change-Id: Id0196b20783126c36f8552534b7ec3bd9049a24f
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43567
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch excludes bit fields that must be ignored (1,2) in order
to convert current macros to target PAD_CFG_*() macros. The following
commands were used for this:
./intelp2m -fld cb -ign -t 1 -file ../../src/mainboard/razer/
blade_stealth_kbl/gpio.h
- ignore RO bit fields;
- ignore RX Level/Edge Configuration (bit 26:25) and RX/TX Buffer
Disable (bit 9:8) for the native function, because it does not
affect the pad in this mode.
This is part of the patch set
"mb/razer/blade_stealth_kbl/gpio: Rewrite pad config using intelp2m":
CB:43857 - 1/3 Decode raw register values
CB:43858 - 2/3 Exclude fields for PAD_CFG
CB:43411 - 3/3 Convert field macros to PAD_CFG
Change-Id: Ia36c5d0cd449a32d76351a87a33a55196ae78443
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43858
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Mimoja <coreboot@mimoja.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use the intelp2m utility [1,2] with -adv options to convert the pad
configuration format with the raw values of the DW0 and DW1 registers
to the format with the bit fields macros: PAD_FUNC(), PAD_RESET(),
PAD_TRIG(), PAD_BUF(), PAD_PULL(), etc...
./intelp2m -fld cb -t 1 -file ../../src/mainboard/razer/
blade_stealth_kbl/gpio.h
This is part of the patch set
"mb/razer/blade_stealth_kbl/gpio: Rewrite pad config using intelp2m":
CB:43857 - 1/3 Decode raw register values
CB:43858 - 2/3 Exclude fields for PAD_CFG
CB:43411 - 3/3 Convert field macros to PAD_CFG
Tested with BUILD_TIMELESS=1, Razer Blade Stealth, remains identical.
[1] https://github.com/maxpoliak/pch-pads-parser
[2] https://review.coreboot.org/c/coreboot/+/35643
Change-Id: I7c4a29f87b56c5ec7e4b74274ae677c4c08c2e8c
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43857
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Mimoja <coreboot@mimoja.de>
Use the intelp2m utility [1,2] with -fld=cb options to convert the pad
configuration format with the raw values of the DW0 and DW1 registers
to the format with the bit fields macros: PAD_FUNC(), PAD_RESET(),
PAD_TRIG(), PAD_BUF(), PAD_PULL(), etc...
./intelp2m -fld cb -t 1 -file ../../src/mainboard/51nb/x210/gpio.h
This is part of the patch set
"mb/51nb/x210/gpio: Rewrite pad config using intelp2m":
CB:43566 - 1/4 Decode raw register values
CB:43567 - 2/4 Exclude fields for PAD_CFG
CB:43568 - 3/4 Fixes PAD_RESET to convert to PAD_NC()
CB:43410 - 4/4 Convert field macros to PAD_CFG
Tested with BUILD_TIMELESS=1, 51NB-X210, remains identical.
[1] https://github.com/maxpoliak/pch-pads-parser
[2] https://review.coreboot.org/c/coreboot/+/35643
Change-Id: I19282c985cf35a9f99be449915aa9bab7e03472d
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43566
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This sets the state of GSPI chip select to 1 (deasserted) as applied
by the FSP during the silicon init phase. GSPI 0 and 1 are set to CS
mode manual in the SerialIoGSpiCsMode section which means we need to
explicitly configure CS to deasserted in the SerialIoGSpiCsState
section. GSPI0 is the CR50 and GSPI1 is the fingerprint sensor. We
were running into problems where the normal expected CS toggle
sequence to wake up CR50 did not work because CS was already asserted
when it was expected to be deasserted, leading to TPM timeouts.
BUG=b:168090038
TEST=booted on volteer, no more "TPM flow control failure" messages;
verified fingerprint enrollment still works.
Change-Id: I47aa5db429d75e66095d58a1eb77963dcfc3b9f3
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45384
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PMC support was not enabled on Xeon_sp platforms. This involves turning
on SOC_INTEL_COMMON_BLOCK_PMC and then adding the proper hooks in SOC
specific code. This patch leverages code from the Skylake project and
adds the bare minimum hooks to leverage PMC common code. Most
importantly this enables power management registers located in the PMC
device (under ACPI_BASE_ADDRESS). Access to this device is also needed
for SMM setup and handling.
TEST=build for Tiogapass and enable the following Kconfig options:
select SOC_INTEL_COMMON_BLOCK_PMC
select ACPI_INTEL_HARDWARE_SLEEP_VALUES
select CPU_INTEL_COMMON_SMM
Boot the system and ensure pmbase is programmed. (Look for pmbase in
debug messages). Secondly check that SMIs are enabled by looking at the
debug messages (search for "Enabling SMIs") and verifying in HW by
reading IO port 0x530.
Change-Id: I6d57a8282a8b6dc4314f156c39deb09535575cbd
Signed-off-by: Rocky Phagura <rphagura@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
IIO_UDS HOB was searched several times during the creation of DMAR table.
Reduce it to only once to improve boot time.
Both DRHD and ATSR subtable creations involve addition of PCIe bridge
device entries, combine the functions with
acpi_create_dmar_ds_pci_br_for_port().
When looping through ports to create PCIe bridge device entries,
use MAX_PORTS intead of NUMBER_PORTS_PER_SOCKET to improve boot time.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I469cd8473c50e105daeda6c5607592ae7cef6032
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45376
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Move all files with register definitions into a `registers` subfolder.
Subsequent commits will move the remaining registers into this folder.
Tested with BUILD_TIMELESS=1, Lenovo ThinkPad X230 remains identical.
Change-Id: Ie525e755f32599db97af7969fc7fbb36a5d826b6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45358
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Several registers have been copy-pasted from i945 and do not exist on
Sandy Bridge. Moreover, other register definitions were missing. Use the
newly-added definitions in existing code, in place of numerical offsets.
Tested with BUILD_TIMELESS=1, Lenovo ThinkPad X230 remains identical.
Change-Id: I9ad849f57bc68256a2a87ffdc856c4b521e35892
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45357
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add newly defined fields for presence of keyboard backlight and
number pad to the firmware configuration table.
We don't have a need to use these in coreboot (yet) but this
keeps the bit definitions in sync.
BUG=b:166707536
TEST=abuild -t google/volteer
Change-Id: I066e445f7d0be056e45737d2c538be1850ae85aa
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45346
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Check that nobody misuses the Kconfigs SUBSYSTEM_*_ID. They are meant to
be used for overriding the devicetree subsystem ids locally but shall
not be added to a board's Kconfig. Instead, the devicetree option
`subsystemid` should be used.
Add a linter script for this that finds and warns about such misuse.
Also add a note in the Kconfigs' description.
TEST=CB:45513
Change-Id: I21c021c718154f1396f795a555af47a76d6efe03
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45513
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Enable CSE PCI device Bus 0: Device 0x0f: Function 0x00 to let
Intel common cse block code can use this device.
Calling me_read_config32(offset) function from ramstage:
Without this CL :
HECI: Global Reset(Type:1) Command
BUG: me_read_config32 requests hidden 00:0f.0
PCI: dev is NULL!
With this CL :
HECI: Global Reset(Type:1) Command
HECI: Global Reset success!
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I97d221ae52b4b03ecd859d708847ad77fe4bf465
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45469
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
This patch updates the display power enable GPIO which moved from 30 to
52 for Coachz. Veterans of this project know that there's no point
trying to ask *why* this change was necessary -- the pins move in
mysterious ways and all we can do is watch and wonder. Pin 30 is now
used for a new camera reset GPIO... surely, there must have been some
excellent reason why that pin couldn't just have become pin 52 instead.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I00ad6a6249df66006b4f2b953a0a2449bd478f6d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45306
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Philip Chen <philipchen@google.com>
GPIOs related to power sequence are
GPIO_67 - EN_PP3300
GPIO_117 - FULL_CARD_POWER_ON_OFF
GPIO_161 - PLT_RST_LTE_L
1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161
2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67
3. Power reset:
- keep GPIO_67 and GPIO_117 high and
- pull down GPIO_161 for 30ms then release it.
BUG=b:168075958
BRANCH=octopus
TEST=build image and verify on the DUT with LTE DB.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I9b56ef8ff346c1d4edd5aad04d4a7396c4702ffc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45193
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
BUG=chromium:1023662
TEST=buildbot pass
TEST=1. Use python2 script
2. Run `emerge-kevin coreboot` twice, so we get bootblock.bin.1
and bootblock.bin.2
3. Run `xxd` on these two bootblock so we get bootblock.bin.1.hex
and bootblock.bin.2.hex
4. `diff bootblock.bin.1.hex bootblock.bin.2.hex` and record the
difference. (at least, the time info changes)
5. Migrate to python3
6. Similar steps, we get bootblock.bin.py3.hex
7. `diff bootblock.bin.1.hex bootblock.bin.py3.hex`, the difference
is similar. (time info, git hash changes)
Signed-off-by: Yilin Yang <kerker@google.com>
Change-Id: I04253084ec9b65310c52598b629390051cd2172b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45447
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There's no need to place a single-line function in its own compilation
unit, and then guard it behind a Kconfig symbol. This also allows using
this function in stages other than ramstage.
Change-Id: I103a4ea4cef24844d382854c9358bbb37d229e04
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42130
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
RMW (read/modify/write) ops on PnP devices has never been so simple.
The semantics also allow the compiler to emit valid warnings if the
input parameters would overflow, which are silenced when the cast is
placed outside of the function.
Change-Id: Ica01211af2a9a00aed98880844a836f6b7957b14
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42134
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
BUG=chromium:1023662
TEST=1. Create a tiny file `in.txt` as input
2. Run `fixed_cksum.py in.txt out.txt 20` with py2 and py3 version,
the output is the same
3. Run `variable_cksum.py in.txt out.txt` with py2 and py3 version,
the output is the same
Signed-off-by: Yilin Yang <kerker@google.com>
Change-Id: I9428269dfb826a3a95fffef9ea3f7c1a7107ef84
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45460
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
BUG=chromium:1023662
TEST=1. Use python2 script
2. Run `emerge-asurada coreboot` twice, so we get bootblock.bin.1
and bootblock.bin.2
3. Run `xxd` on these two bootblock so we get bootblock.bin.1.hex
and bootblock.bin.2.hex
4. `diff bootblock.bin.1.hex bootblock.bin.2.hex` and record the
difference. (at least, the time info changes)
5. Migrate to python3
6. Similar steps, we get bootblock.bin.py3.hex
7. `diff bootblock.bin.1.hex bootblock.bin.py3.hex`, the difference
is similar.
Signed-off-by: Yilin Yang <kerker@google.com>
Change-Id: I788e7c9b09257142728a0f76df8c2ccc72bf6b3b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45440
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
The current initialization of the 'equals' counter is incorrect, so that
when 'equals >= SSZ * SSZ', the pixels in the sample array might not be
all the same, leading to a wrong pixel value being set in the
framebuffer.
The 'equals' counter stores the number of latest pixels that were
exactly equal. Within the for loop of 'ox', the sample array is updated
in a column-based order, and the 'equals' counter is updated
accordingly. However, the 'equals' counter is initialized in a row-based
order, which causes it to be set too large than it should be. Consider
the example where sample[sx][sy] are initially:
[X X X A A A] // sy = 0
[X X X B B B]
[X X X B B B]
[X X X B B B]
[X X X B B B]
[X X X B B B] // sy = SSZ
Then, the correct implementation will initialize 'equals' to be 15, with
last_equal being B. Suppose all of the remaining pixels are B. Then, at
the end of the 'while (fpfloor(ixfp) > ix)' loop when ix = 4, or
equivalently after 4 more columns of sample are updated, 'equals' will
be 15 + 6 * 4 = 39, which is greater than SSZ * SSZ = 36, but we can see
there are still 2 A's in the sample:
[B B B B A A]
[B B B B B B]
[B B B B B B]
[B B B B B B]
[B B B B B B]
[B B B B B B]
Therefore, we must also initialize the 'equals' counter in a
column-based order.
BUG=b:167739127
TEST=emerge-puff libpayload
TEST=Character 'k' is rendered correctly on puff
BRANCH=zork
Change-Id: Ibc91ad1af85adcf093eff40797cd54f32f57111d
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45235
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The following parameters do nothing else than configuring the
corresponding pads to native mode:
- DdiPortEdp
- DdiPort*Hpd
- DdiPort*Ddc
- GpioDdp*
- SpiGpioAssign
- I2c*GpioAssign
- SerialIoUartDebugEnable
- Gp*GpioAssign
- Uart*GpioAssign
- GpioEnableHdaLink
- AudioLinkDmic*
- AudioLinkSsp*
- GpioEnableHdaSspMasterClock
- AudioLinkSndw*
- SmbAlertEnable
Add the missing special function gpio pad groups for CNL, to be able to
configure them via gpio.h instead having to set various FSP parameters.
The groups and names are documented in the PCH EDS, in Linux
(linux/drivers/pinctrl/intel/pinctrl-cannonlake.c) and other places.
Also, see soc/intel/tigerlake for reference.
Change-Id: Ia3bc1df1a14dbca7c7213577cb2d5b98bb0acf64
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested on lemp9, power limits are adjusted from the previously low
values to the values the thermal system can handle. This was
determined by increasing the values and running the system at 100%
CPU utilization until thermal throttling occured and the chassis
temperature became uncomfortable.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Change-Id: I5e176e9d98376f8e2dc415e4397efc456869e72d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43624
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The names of the GPIO_RSVD_* are documented in the PCH EDS, in Linux
(linux/drivers/pinctrl/intel/pinctrl-cannonlake.c) and other places.
Also, see soc/intel/tigerlake for reference.
Change-Id: I59df09c8fd464e75f918455aa1972765abc51459
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Move all files with register definitions into a `registers` subfolder.
Subsequent commits will move the remaining registers into this folder.
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical.
Change-Id: I143b3c829be44a39e14902255cd4bb13bf02f0c1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45354
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Perform the read to the TPM base address using <arch/mmio.h> functions.
Remove dead variable assignment and rename TPM base address macro.
Tested with BUILD_TIMELESS=1. Asus P5QL PRO remains identical.
Change-Id: I11d737903c57fce768b760fe717564dae8879ad0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Several registers have been copy-pasted from i945 and do not exist on
Haswell. Moreover, other register definitions were missing. Although
most of them are unused, native platform init may eventually use them.
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical.
Change-Id: I6b3a47b2af406da6b030d417f14a2f4d394aa9c8
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45353
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This allows us to drop some casts to uintptr_t around the tree.
The MCHBAR32 macro still needs a cast to preserve reproducibility.
Only the native raminit path needs the cast, the MRC path does not.
Tested with BUILD_TIMELESS=1, these boards remain identical:
- Lenovo ThinkPad X230
- Dell OptiPlex 9010
- Roda RW11 (with MRC raminit)
Change-Id: I8ca1c35e2c1f1b4f0d83bd7bb080b8667dbe3cb3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45349
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
add the dptc interface support when system in tablet mode.
In some FP5/FT5 platform, which will have different power or thermal
parameters depends on different form factor.
BUG=b:157943445
BRANCH=Zork
TEST=Build. check the setting changed.
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I2be7942132cea474237f531021ad4fd9856b5050
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44265
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
add dptc support for different power parameter on tablet/clamshell mode
The BIOS may choose to adjust power and/or thermal parameters at its own
discretion. The DPTC interface(DPTCi) ALIB Function adds flexibility by
allowing the BIOS to request power state changes independently of specific
events.
BUG=b:157943445
BRANCH=none
TEST=Build.Generated ASL code from SSDT by acipgen_dptci().check the setting changed.
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: Icae94103f254f8fdb84e6ee0f5404fb09fa97b2d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43408
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add region_file_update_data_arr, which has the same functionality as
region_file_update_data, but accepts mutliple data buffers. This is
useful for when we have the mrc_metadata and data in non-contiguous
addresses, which is the case when we bypass the storing of mrc_cache
data into the cbmem.
BUG=b:150502246
BRANCH=None
TEST=reboot from ec console. Make sure memory training happens.
reboot from ec console. Make sure that we don't do training again.
Change-Id: Ia530f7d428b9b07ce3a73e348016038d9daf4c15
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45407
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This adds error checking in paths that previously ignored TPM
communication errors. We hit this case occasionally during "Checking
cr50 for pending updates"; previously we would go down this path and
eventually time out using MAX_STATUS_TIMEOUT, which is 2 minutes.
Now, we detect the failure and return with an error indication instead
of timing out after a long time. The root cause of the communication
error is an open issue.
BUG=b:168090038
TEST=booted on volteer, observed error handling when
"Checking cr50 for pending updates" fails.
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Change-Id: Ia8a1202000abce1857ee694b06b1478e6b045069
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45232
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jes Klinke <jbk@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Servers often run headless, so a missing EDID isn't a problem. However,
we still need to initialize a framebuffer for the BMC's KVM function.
Reduce the log level to BIOS_INFO to avoid confusion.
Change-Id: Ice17bf6fdda0ce34e686dbf8f3a1fa92ba869d7c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45234
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Memory speed is given as an integer in MHz. In some cases it has
an implicit fractional speed, so simply multiplying by 2 is not
sufficient.
Use method from dram/ddr4.c instead.
BUG=b:167155849
TEST=Boot ezkinil, check output of 'mosys memory spd print all'
and dmidecode -t17
BRANCH=Zork
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: Icc77c21932c68ee9f0ff0b8e35ae7b1a3732b322
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45177
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This fixes commit e1d1fe454c
initialize 'reply.command'.
The compiler now optimized away the final condition, that checks
the result of heci message, resulting in a binary that always
calls die().
Fix that behaviour by using volatile.
Tested on Lenovo T410: Boots again into Linux.
Change-Id: I63cffc8812bd22695c01bf57283ca593b12e3d87
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45174
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Correct sizes of Count, Type, and Latency data field in _CST object to
integer, byte, word, respectively. Correct size of NumEntries data field
in _CSD object to integer.
BUG=b:155307433
TEST=Boot Morphius and dump SSDT _CST and _CSD objects. Confirm that
sizes written conform to ACPI_6_3_May16.pdf ACPI specification.
BRANCH=Zork
Change-Id: I356b46f2fa787e18442a66280b6545a3b525a08b
Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45339
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds a check to avoid violating the PCH EDS recommendation
that the PchPmPwrCycDur will never be smaller than the the SLP_Sx
assertion widths.
This code was initially added for cannonlake and now moving it to common
code since the same check will be used to program the PchPmPwrCycDur
for Jasperlake and Tigerlake.
Change-Id: Ie7d5f54939c5eb1f885d303f75a04958b9d77f4d
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45028
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fingerprint interrupt (FPMCU_INT_L) is level triggered and not edge
triggered. Also, we are using GEVENT for wake from fingerprint and
not the GPIO IRQ wake. Thus, the irq property exposed in ACPI tables
does not need to be set to indicate wake for the IRQ.
This change updates GPIO table to configure the pad as level triggered
and drops the wake attribute for irq_gpio in overridetree.
BUG=b:165612778
BRANCH=zork
TEST=Verified that fingerprint still works in S0 and to wake device
from S3.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I9007e5b0882ac1a6770db52d651218998f6d750d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45307
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
To achieve 115200 baudrate QcLib reconfigures UART frequency
with the lowest supported frequency from QUP clock table.
With this console logs were getting corrupted at qclib stage.
In ChromeOS coreboot, baudrate is configuarable using Kconfig.
QcLib should not assume the baudrate and reconfigure any UART
register once after the configuration is done in coreboot.
To fix the issue QcLib done the changes to not to reconfigure
any UART registers. Hence clock_configure_qup() is not required
in coreboot UART driver.
Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Change-Id: I2531b64eddfa6e877f769af0d17be61f5e4d0c35
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42095
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
There may be a gap between TSEG and the graphics stolen memory due to
the alignment done in `raminit.c`. If we allocate MMIO resources in
this range, it misbehaves unpredictably, so reserve it.
TEST=Booted Thinkpad X201s, allocated resources are above TOLUD.
Change-Id: If305e9751ebf4edc945cf038ed72698f3696e52d
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45325
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change is being done for the following reasons:
1. The CONFIG_ELOG_PRERAM is unused.
2. We need to pull in elog.c into romstage because we are pulling the
mrc_cache_stash_data function into romstage.
3. Furquan says that we can rely on the linker to optimize out the
unused 4KiB buffer in the early stages of boot, which allows us to
get rid of the ELOG_PRERAM config.
BUG=b:117884485, b:150502246
BRANCH=None
TEST=./util/abuild/abuild -p none -t GOOGLE_NAMI -x -a -v
Change-Id: Id76cabc38e41e9bf79e1580a530c871a4ecef4ec
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45303
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add check in setup_preram_cache to return if ENV_SMM is true.
This avoids false warning that post-RAM FMAP is accessed too early
caused by ENV_ROMSTAGE_OR_BEFORE evaluation in SMI handler.
BUG=b:167321319
BRANCH=None
TEST=None
Signed-off-by: Josie Nordrum <josienordrum@google.com>
Change-Id: I3a4c199c42ee556187d6c4277e8793a36e4d493b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45274
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Enabling Bus Master isn't required by the hardware, so we shouldn't need
to enable it at all. However, some payloads do not set this bit before
attempting DMA transfers, which results in boot failures.
Replace static sata_final() implementation for BM enabling with generic
pci_dev_request_bus_master() function.
This allows the user to control through Kconfig whether Bus Master
should be enabled.
TEST=Able to boot to OS from SATA device on CML platform.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: Icd086184fd6fa9c03c806c857f13fad5a9e78a3e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
PMC core OS driver (intel_pmc_core.c in linux kernel) provides debug
hooks to developers and end users to quickly figure out why their
platform is not entering a deeper idle state such as S0ix.
Include the common pmc.asl added in commit 957481c.
Test: PMC gets detected by Linux kernel module.
Change-Id: Ibf7c8ba7449df15c2ca30d23791e17fc878204f2
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45318
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On some systems where the system compiler enables `-Wformat-security
-Werror=format-security` options by default, building libcpp fails
because the code passes a variable directly as a format string.
This change addresses this problem by patching the affected code.
Tested with the default compiler of Nixpkgs unstable, GCC 9.3.0 with the
options described above enabled by default.
Signed-off-by: Masanori Ogino <mogino@acm.org>
Change-Id: Ibf3c9e79ce10cd400c9f7ea40dd6de1ab81b50e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45311
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
GPP_A19(DP_HPD1) and GPP_A20(DP_HPD2) were configured native function
(NF1) without internal pull-down which wrongly presents HPD interrupts.
DP_HPD had been removed for EVT design as those events are through eSPI.
This change configures GPP_A19 and GPP_A20 to be no connection and
disables DdiPort1Hpd and DdiPort2Hpd.
BUG=b:162566436
TEST=Booted to kernel and verified no kernel HPD pins assertion message
on Delbin board.
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Change-Id: Ifdef8ee438276678258b75d2fb70c6dfc7ee0a33
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45031
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
We added transfer_info_struct to contain various information about
memory region we pass from PSP to x86 in commit 0c12abe462.
This should be at the start of transfer region but we only manipulated
it as local variable and didn't put data into the region, resulting
garbage data for transfer_info when x86 tries to read it.
Copy the content of local variable to beginning of _transfer_buffer
before requesting transfer to PSP so coreboot on x86 can access it.
BUG=b:159220781
BRANCH=zork
TEST=check transfer_info_struct is correctly populated on romstage
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I14bc34e6af501240a6f633db3999a7759e88d60b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44751
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Both PCH types are very different, and mixing the code for both together
isn't useful. First of all, inline `pch_is_lp` to return a constant.
This allows the compiler to optimize out unused code, which results in
smaller executables. For the Asrock B85M Pro4, it's about 2.5 KiB less.
Subsequent commits will further split the southbridge code.
Change-Id: Iba904acf64096478d1b76ffd05a076f0203502f8
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45047
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PREV_BOOT_ERR_SRC_HOB is generated by CPX-SP FSP by interrogating
error status registered (such as MCA MSRs) to list fatal errors happened
during the previous boot session.
The header file supports 3 different error source types. CPX-SP FSP
supports only McBankType.
Change-Id: I9b88af17075b98e88c7e94e55fea37627ec03cd0
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44973
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GPP_E12 should not be defined in the baseboard as its use is
determined by the variant. For legacy reasons, we still have GPP_E12
defined in early_gpio but should not. Malefor and volteer* have the
same GPP_E12 definition, but that is a misconfiguration. I think that
was a copy-paste that slipped through the reviews.
BUG=b:157597158
TEST=volteer2 boots to the OS
Change-Id: Ic3ef864827aa94b0b96e335565119f3d5d008837
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45197
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Selects Cache QoS mask MSR programming flow for Tigerlake SoC.
BUG=b:145958015
TEST= Build and boot to Chrome OS on TGL-UP3 RVP.
Recipe used:
1. Patch https://review.coreboot.org/c/coreboot/+/43494 that
implements calculation of CQOS mask dynamically based on stack
size usage & incorporates Tigerlake SoC specific programming flow.
2. QS Engineering Microcode based on 0x56 Official Microcode with
LLC CQOS change.
3. QS SoC Part
Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com>
Change-Id: I602d93eb4f8243ec49993b00691140d9a6cf5733
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45094
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Update the COS mask calculation to accomodate the RW data as per SoC
configuration. Currently only one way is allocated for RW data and
configured for non-eviction. For earlier platform this served fine,
and could accomodate a RW data up to 256Kb. Starting TGL and JSL, the
DCACHE_RAM_SIZE is configured for 512Kb, which cannot be mapped to a
single way. Hence update the number of ways to be configured for non-
eviction as per total LLC size.
The total LLC size/ number of ways gives the way size. DCACHE_RAM_SIZE/
way size gives the number of ways that need to be configured for non-
eviction, instead of harcoding it to 1.
TGL uses MSR IA32_CR_SF_QOS_MASK_1(0x1891) and IA32_CR_SF_QOS_MASK_2(0x1892)
as COS mask selection register and hence needs to be progarmmed accordingly.
Also JSL and TGL platforms the COS mask selection is mapped to bit 32:33
of MSR IA32_PQR_ASSOC(0xC8F) and need to be updated in edx(maps 63:32)
before MSR write instead of eax(maps 31:0). This implementation corrects
that as well.
BUG=b:149273819
TEST= Boot waddledoo(JSL), hatch(CML), Volteer(TGL)with NEM enhanced
CAR configuration.
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Change-Id: I54e047161853bfc70516c1d607aa479e68836d04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The latest debian image needs the python2 package specified instead of
just 'python'. Also add python3 to the builder as we'll probably be
getting python3 scripts before too long.
Change-Id: Iceea3981b1e219141bf06ad0b559cdbf1c98b360
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45265
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The current realloc() works by freeing the origin buffer, allocating a
new one, and copying the data over. It's true that free() won't touch
the actual memory. However, the alloc() following it will potentially
modify the memory that belongs to the old buffer in order to create a
new free block (right after the newly allocated block). This causes 8
bytes (HDRSIZE) to be overwritten before being copied to the new buffer.
To fix the problem, we must create the header of the new free block
after the data is copied. In this patch, the content of alloc() is split
into two functions:
1. find_free_block(): Find a free block with large enough size, without
touching the memory
2. use_block(): Update the header of the newly allocated block, and
create the header of the new free block right after it
Then, inside realloc(), call memmove() call right after
find_free_block() while before use_block().
BUG=b:165439970
TEST=emerge-puff libpayload
TEST=Puff boots
TEST=Verified realloc() correctly copied data when buffers overlapped
Change-Id: I9418320a26820909144890300ddfb09ec2570f43
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45284
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The usual structure of these files is a global enable symbol, usually
followed by an if-block which contains all other dependent symbols.
Use this instead of having a `depends on` line to each symbol. Guard all
symbols, even if they originally were not guarded, since they don't do
anything useful unless the global enable option is selected.
Change-Id: If5347187b07a46192f0063011ab197b5047f555f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45043
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Updating from commit id fefcaa65:
vboot: adjust VB2_SECDATA_KERNEL_FLAGS in non-recovery path
to commit id 4bb06cc1:
COIL: Change denylist to blocklist
This brings in 20 new commmits.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Change-Id: I0efef2f0ab6ecb89c8132cca2bd4ab7f71e85ced
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45299
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This is required for Super I/Os to be able to read the CPU temperature
through PECI.
On 45nm Core 2 CPUs (Wolfdale, Yorkfield) it is not enabled by default.
This is probably related to erratum AW67 "Enabling PECI via the PECI_CTL
MSR incorrectly writes CPUID_FEATURE_MASK1 MSR". The suggested
workaround is "Do not initialize PECI before processor update is
loaded". Since coreboot performs microcode updates before running this
code it should not cause any trouble. It was tested on a Core 2 Duo
E8400, stepping E0.
PECI is already enabled by default on older (65nm) CPUs. Tested: Pentium
Dual-Core E2160.
See commit edac28ce65 for the same change
on cpu/intel/model_6fx.
Signed-off-by: Michael Büchler <michael.buechler@posteo.net>
Change-Id: I5a3ec033bd816665af4ecc82f7b167857cd7c1b6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The debug statement to print WiFi SAR file can potentially have a NULL
pointer. Also the debug statement does not add much value. Hence remove the
debug statement.
BUG=b:165613510
TEST=Build and boot the drawcia board to OS.
Change-Id: I710240f5e965f523fb8ac55a67880e1cbf9abd48
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45298
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Rarely, the driver of one device needs to know about another device
that can be anywhere in the device hierarchy. Current applications
boil down to EEPROMs that store information that is consumed by some
code (e.g. MAC address).
The idea is to give device nodes in the `devicetree.cb` an alias that
can later be used to link it to a device driver's `config` structure.
The driver has to declare a field of type `struct device *`, e.g.
struct some_chip_driver_config {
DEVTREE_CONST struct device *needed_eeprom;
};
In the devicetree, the referenced device gets an alias, e.g.
device i2c 0x50 alias my_eeprom on end
The author of the devicetree is free to choose any alias name that
is unique in the devicetree. Later, when configuring the driver the
alias can be used to link the device with the field of a driver's
config:
chip some/chip/driver
use my_eeprom as needed_eeprom
end
Override devices can add an alias if it does not exist, but cannot
change the alias for a device that already exists.
Alias names are checked for conflicts both in the base tree and in the
override tree.
References are resolved after the tree is parsed so aliases and
references do not need to be in a specific order in the tree.
Change-Id: I058a319f9b968924fbef9485a96c9e3f900a3ee8
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35456
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
drawman/drawlat/drawcia share the same coreboot, and only drawcia is convertible.
Use tablet mode of fw config to decide to load custom wifi sar or not.
BUG=b:165613510
TEST=enable CHROMEOS_WIFI_SAR in config of coreboot,
emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage.
Change-Id: Ibcd498021e63d0a172c71c3d94b60b3a25973467
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44661
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Calling espi_open_generic_io_window in espi_open_io_window depends on
the condition in the preceding if statement, so move the command into an
else block to make it more obvious that this is the case.
TEST=Timeless build results in identical image.
Change-Id: I3039817afd79c30a2df2f2f54e7848f52dc2c487
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Apparently what I thought was lazor-rev2 is actually lazor-rev3 and
nobody is really sure what lazor-rev4 is going to be at this point or
how we proceed from there. What seems to be somewhat agreed upon is that
for now all Lazor revisions use the "old" GPIO mapping and it's not very
clear if that's ever going to change for Lazor, so let's take the
revision restriction out from Lazor for now.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I4939ccfd8464da6e72b5e01a58489b8c80f5b4df
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45225
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Philip Chen <philipchen@google.com>
Move APCB generation out of the picasso makefile and into the mainboard
makefile. APCB generation tends to be mainboard specific and does not
belong in the soc makefile.
BUG=b:168099242
TEST=Build mandolin and check for APCB in coreboot binary
Build and boot ezkinil
Change-Id: Ib85ad94e515f2ffad58aafe06c1f1d4043e9303c
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45222
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This fixes the hex-to-bin conversion command, used to generated binary
SPD files from hexdumps.
An issue that only appeared on one of my systems, where conversion of
'01 02 03' to binary resulted in \x01\x32\x03 instead of \x01\x02\x03:
for c in 01 02 03; do printf $(printf '\%o' 0x$c); done | xxd -g 1
00000000: 01 32 03 .2.
The reason for this was that the syntax in lib/Makefile.inc is wrong,
because the backslash must be escaped due to chaining two printf
commands.
Change-Id: I36b0efac81977e95d3cc4f189c3ae418379fe315
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45207
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add the missing entry using new Kconfig symbol for IOAPIC ID. coreboot
will always enable the GNB IOAPIC.
Cq-Depend: chrome-internal:3247431, chrome-internal:3253044
BUG=b:167421913, b:166519072
TEST=Boot fully to morphius board with and without amd_iommu kernel
parameter. Dump MADT and IVRS tables. Cross check ioapic entries
in MADT against IVRS.
BRANCH=Zork
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Change-Id: Ic4a2e9b71dba948e8a4907e5f97131426d8a4a3e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45056
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add Kconfig symbols for the FCH and GNB IOAPIC IDs, then pass
the info to FSP to keep it in sync with coreboot. Do the same
for the northbridge's IOAPIC base address.
Use the new values where needed, and reserve the resources
consumed by the GNB IOAPIC.
BUG=b:167421913, b:166519072
TEST=Boot Morphius and verify settings
BRANCH=Zork
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I57d3d6b2ebd8b5d511dbcb4324ea065cc3111a2d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45115
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GPIO Driver mode is used for configuration interrupt routing for
external devices through GPI. But there is no point in configuring
this for GPO. This patch replaces the PAD_CFG_GPO_GPIO_DRIVER macro
with others that do not set the corresponding bit in the Host Software
Pad Ownership register.
Change-Id: I406a08e526a6c655f38e4c0a355957c98e93881c
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44469
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Add sc7180 display hardware pipeline programming support
and invoke the display initialization from soc_init.
Changes in V1:
- added display init required check.
- added edid read function using i2c communication.
- added sn65dsi86 bridge driver to init bridge.
- moved display initialization to mainboard file.
Changes in V2:
- moved diplay init sequence to mainboard file
- moved edid read function to bridge driver.
- calculated timing paramters using edid parameters.
- removed command mode config code.
- moved bridge driver to drivers/ti.
- seperated out bridge and soc code with mainboard file as interface.
Changes in V3:
- add GPIO selection at runtime based on boardid.
- add vbif register struct overlay.
Changes in V4:
- update gpio config for lazor board.
Change-Id: I7d5e3f1781c48759553243abeb3d694f76cd008e
Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39615
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
With the current timeout of 1000 cycles of 100 microsecond would see
timeout occurs on OCP Delta Lake if the log level is set to values
smaller than 8. Because the prink(BIOS_SPEW, ..) in ipmi_kcs_status()
creates delay and avoid the problem, but after setting the log level
to 4 we see some timeout occurs.
The unit is millisecond and the default value is set to 5000 according
to IPMI spec v2.0 rev 1.1 Sec. 9.15, a five-second timeout or greater
is recommended.
Tested=On OCP Delta Lake, with log level 4 cannot observe timeout
occurs.
Change-Id: I42ede1d9200bb5d0dbb455d2ff66e2816f10e86b
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45103
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add new memory.c to support DDR4 memory types.
Use the new meminit_ddr() and variant_memory_sku() for eldrid variant
code on memory.c
The initial settings override the baseboard from volteer and fine tune
gpio.c and overridetree.cb on eldrid's configuration.
BUG=b:161772961
TEST='emerge-volteer coreboot chromeos-bootimage' and verify that Eldrid
can boots. NOTE that tests the ddr4 side of the implementation.
Change-Id: I2c7b30093a8d85bac5aba5b83768af5eb36c4f70
Signed-off-by: Nick Chen <nick_xr_chen@wistron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44632
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Allows the AM335X to boot from the coreboot generated MLO by:
- Fixing the load address in the MLO header to be the start of SRAM
- Fixing the way that the bootblock size is calculated (which is
embedded into the MLO so that the MLO knows how much to load into
SRAM). The previous method relied on parsing cbfstool output - the
output has changed format since this was originally written so this no
longer works. Directly using the filesize of the built binary is
probably a more stable way of doing this.
As part of this, the start addresses of SRAM and DRAM were fixed to be
consistent with the AM335x Technical Reference Manual (spruh73, rev Q).
TEST: Booted Beaglebone Black from MLO placed at offset 0x00 on an SD card
Change-Id: I514d7cda65ddcbf27e78286dc6857c9e81ce6f9e
Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44381
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The console is initialized before mainboard_init, so the peripheral
should be initialized in bootblock_mainboard_early_init rather than
bootblock_mainboard_init.
Change-Id: I9f4ba29798eb0b1efea76f5ade4a234fb35a2f83
Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This is an intermediate step to have SOC_INTEL_COMMON_BLOCK_CPU select
CPU_INTEL_COMMON directly, to avoid dependency problems.
Tested with BUILD_TIMELESS=1: Without including the config file in the
coreboot.rom, both OCP Tioga Pass and Delta Lake remain identical.
Change-Id: I565e75869be730e7c2fe7114b829941bc9890e6c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45041
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This ports Linux commit 71f677a91046599ece96ebab21df956ce909c456
"Handle configuration without P2A bridge".
Quote:
The ast driver configures a window to enable access into BMC
memory space in order to read some configuration registers.
If this window is disabled, which it can be from the BMC side,
the ast driver can't function.
Closing this window is a necessity for security if a machine's
host side and BMC side are controlled by different parties;
i.e. a cloud provider offering machines "bare metal".
P2A stands for primary to AHB.
Tested on Prodrive Hermes, which uses an AST2500. The machine still
boots, has a high resolution framebuffer working in EDK2, and its
boot time has been reduced by 2.5 seconds as it no longer runs into
a timeout due to disabled P2A bridge.
Change-Id: I3293dc35ae89c010154e02eff904ec3a68c96683
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45137
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The three Intel Apollo Lake boards (apl_rvp, leafhill and minnow3) do
not define MAX_CPUS, which would then default to 1. Since this is most
likely an oversight, use the same value as other Apollo Lake boards.
To ensure this does not happen again, factor out MAX_CPUS to SoC scope.
Change-Id: I5ed98a6b592c8010b59eca7ff773ae1ccc4cd7b1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45144
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
CB:44774 introduced the non-existent SPD path. This is preventing the
device from booting up.
BUG=b:168053219
TEST=Build and boot drawcia board to OS.
Change-Id: I70ca5f4cf2c8e2e88ea5b1514b656caafb732743
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45182
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Instead of generating hexdumps, output binary SPD files since we plan to
convert all hex SPD files to binary. Also adjust the file extension
where needed.
Test: compared generated binaries with converted binaries from hex files
Change-Id: Ie99d108ca90758d09dbefad20fe6c9f7fc263ef1
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44878
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Passing binary SPD files to apcb_edit can lead to an encoding error,
since the files were read in text mode. To fix this, read SPD files
always in binary mode and only decode them, when `--hex` is set.
Tested by comparing output files from the same SPDs in both, binary and
hex mode.
Change-Id: I6b75a9e1234e71667bdc8cb4eb10daf8c0ac3c17
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44778
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
To minimize the quirks the kernel has to apply, the headset mic is set
to its correct value in coreboot.
Tested on lemp9, audio is functional.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Change-Id: I6b59de95f01360a5f7779f87f39edeb75dedc215
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43631
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PSTACK2 (IOU3) should be stack number 4, mainboard uses stack number as
the index to access the bus number array read by get_stack_busnos().
Without the fix it would get the wrong bus number (0xb1).
Tested=On OCP Delta Lake, dmidecode -t 9 to verify slots bus number on
IOU3 are correct (0xb2).
Change-Id: I1c9e49bbc9a00de82d1fc67b3b4ed47e03eacdda
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45022
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
FSP v3333 or later, provides a new UPD to Skip configuring
GPIO settings from FSP. coreboot should provide all the
required GPIO configuration for the platform when this UPD
is set.
BUG=b:166790597, b:146390704
BRANCH=none
TEST=build and boot volteer proto2
Cq-Depend:chromium-internal:3240396,chromium-internal:2870145
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: If32f35a188d510db8e4d8973cae78297d49a9240
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44913
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update FSP headers for Tiger Lake platform generated based FSP
version 3333. Previous version was 3313.
Changes Include:
1. Update comments
2. Add new UPD for Gpio Override support
BUG=b:166790597
BRANCH=none
TEST=build and boot volteer proto2
Cq-Depend:chromium-internal:3240396,chromium-internal:2870145
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: Ie3f0688143eef532946c7a2141909c1ac173fc2f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44912
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Clone entirely from Jasperlake
List of changes on top off initial jasperlake clone
1. Rename from jasperlake to elkhartlake
2. Remove irelevant devices asls (ipu,ish,camera clock,gpio_op)
Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com>
Change-Id: I5e77081d1673cc0ca97edc63e9996c045ab6e9b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44812
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Clone entirely from Jasperlake
List of changes on top off initial jasperlake clone
1. Replace "Jasperlake" with "Elkhartlake"
2. Replace "jsl" with "ehl"
3. Replace "jsp" with "mcc"
4. Rename structure based on Jasperlake with Elkhartlake
5. Clean up upd override in fsp_params.c will be added later
6. Sort #include files alphabetically as per comment
7. Remove doc details from espi.c until it is ready
8. Remove pch_isclk & camera clocks related codes
9. Add new #define NMI_STS_CNT & NMI_EN as per comment
Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com>
Change-Id: I372b0bb5912e013445ed8df7c58d0a9ee9a7cf35
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
This is an intermediate step to have SOC_INTEL_COMMON_BLOCK_CPU select
CPU_INTEL_COMMON directly, to avoid dependency problems.
Tested with BUILD_TIMELESS=1, UP Squared does not change.
Gemini Lake already selects this through SOC_INTEL_COMMON_BLOCK_SGX.
Change-Id: If737fa6d8700f435c8692c80244f0e71657c2236
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45038
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
The SMRR MSRs can be locked, so that a further write to them will cause
a #GP. This patch adds that functionality, but since the MSR is a
core-level register, it must only be done once per core; if the SoC has
hyperthreading enabled, then attempting to write the SMRR Lock bit on
the primary thread will cause a #GP when the secondary (sibling) thread
attempts to also write to this MSR.
BUG=b:164489598
TEST=Boot into OS, verify using `iotools rdmsr` that all threads have
the Lock bit set.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I4ae7c7f703bdf090144637d071eb810617d9e309
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45013
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kane Chen <kane.chen@intel.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
For Volteer (and future Tiger Lake boards) we can enable mode S0i3.4
only if we know that the Cr50 is generating 100us interrupt pulses.
We have to do so, because the SoC is not guaranteed to detect pulses
shorter than 100us in S0i3.4 substate.
A new Kconfig setting CR50_USE_LONG_INTERRUPT_PULSES controls new code
running in verstage, which will program a new Cr50 register, provided
that Cr50 firmware is new enough to support the register.
This CL adds code to detect the case when Cr50 is unable to generate
longer pulses, and in that case explicitly disable the S0i3.4 substate
as well as setting gpio_pm_override to all zeroes. This will increase
power usage slightly, but guarantee that the GPIO block in the SoC
does not switch to a slower sampling clock. In practice, this case
will only be encountered in the factory, before the Cr50 chip is
updated to a new RW image.
(Prior to this change, the gpio_pm_override was hardcoded to zero for
Volteer, but the S0i3.4 substate was not disabled. According to my
conversations with Intel engineers, that was not enough to guarantee
detection pulses shorter than 100us. But it is entirely possible that
we have just been "lucky" that the SoC has not gone into low power
mode during the boot process, where most of the cr50 communication
happens.)
TEST=util/abuild/abuild -t GOOGLE_VOLTEER -c max -x
BUG=b:154333137
Change-Id: Idef1fffd410a345678da4b3c8aea46ac74a01470
Signed-off-by: Jes Bodi Klinke <jbk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44359
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add DTT (Dynamic Tuning Technology) support for Jasper Lake based rvp board.
Set power limits and CPU sensor thresholds for DTT based thermal control.
BRANCH=None
BUG=Noe
TEST=Build and boot on jslrvp board
Change-Id: I41409c70d8472c54ca452fc98d5ee9edf3ccd307
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44942
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Create the dooly variant of the puff reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.1.2).
BUG=b:155261464
BRANCH=puff
TEST=util/abuild/abuild -p none -t google/hatch -x -a
make sure the build includes GOOGLE_DOOLY
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Change-Id: I8e714cc9bf4a49266da77db88f8c4a3ca45878d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45026
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
3.6 schematic will separate TS power from eDP PP3300 to GPIO
for power control and correct GPIO assignment from GPIO_90 to
GPIO_32 instead.
BUG=b:161579679
BRANCH=zork
TEST=emerge-zork coreboot
Change-Id: Ieef67e1d04201c5d9e1dc625c519e6d0307c55f0
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45061
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This adds support for line-buffered console output to System76 EC firmware.
Once the print command is received, the EC firmware multiplexes the output
to any enabled console on the EC. This can be a memory ringbuffer, a
parallel port (using the keyboard connector), or i2c (using the battery
connector). Once the entire buffer is sent, it sets the command register
to 0, indicating completion. For more information, please see:
https://github.com/system76/ec/blob/master/doc/debugging.md
Tested on system76/lemp9 with CONSOLE_SYSTEM76_EC enabled.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Change-Id: I861bf3e22f40dd6c3ec7ba1d73711b399358e332
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Enable the I2C HID driver, configure I2C bus 0 and add the touchpad
device to the devicetree.
Tested on lemp9, touchpad confirmed to use i2c-hid driver in Linux
instead of PS/2.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Change-Id: Ic3a90fda134b1d53f28ab687b3033ec52fee843b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43623
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Drop duplicated code for spd.bin generation that is provided globally
in lib/Makefile.inc.
For all affected boards it has been verified that the output binary
functionally matches the original one. The changed execution order of
Make instructions influenced the cbfs file order. Hence, the rom images
can't be compared directly.
Thus, the output files of the two timeless abuild runs have been compared.
Further, it was verified that the final files in cbfs stay identical, by
comparing the extracted cbfs of each board.
The boards (possibly) needing modification could be found with something
like this (with false positives, though):
find src/mainboard -name Makefile.inc | \
xargs egrep 'SPD_BIN|SPD_DEPS' | cut -d: -f1 | sort -u
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: Icd3ac0fd6c901228554115c6350d88bb49874587
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
_GPE cannot be anywhere but at the root of the ACPI namespace.
This change ensures that is always the case.
Tested on lemp9, GPE still in correct location.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Change-Id: Ib31683b06e61da4b1859cd939c36879cebf4c03c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43630
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The GPIOs required for DeepSx (e.g. SLP_SUS#) are not hooked up on the
lemp9. Therefore, drop the DeepSx settings.
Tested on lemp9, suspend works correctly.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Change-Id: Iab179abd7adc3a65dcfc43ce1b5742d514b711fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43629
Reviewed-by: Michael Niewöhner
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Setting USBx_PORT_EMPTY is not a requirement anymore, since unset
devicetree settings default to 0 and the OC pin now only gets set when
the USB port is enabled (see CB:45112).
Thus, drop the setting from all devicetrees.
Change-Id: I899349c49fa7de1c1acdca24994ebe65c01d80c6
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Fsp configures the USB over-current pin and overrides the according pad
configuration to NF1, regardless of the port being configured as disabled.
Thus, set the OC pin to 0xff ("disabled") in this case to prevent this.
This allows us to skip setting USBx_PORT_EMPTY in the devicetree for
disabled USB ports.
Change-Id: Ib8ea2ea26c0623d4db910e487b37255e907b299d
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45112
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
List of changes:
1. Add required SoC programming till bootblock
2. Include only required headers into include/soc
3. Add CPU/PCH/SA EDS document number and chapter number
4. Include ADL-P related DID, BDF
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I204e692fabb84fce297bebee465f4ca624c6fe56
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44857
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
According to the xHCI spec, the Slot State field in the Slot Context
Data Structure is 5 bits wide. So, fix the code to match.
ref. xHCI spec 1.2
section 6.2.2, Figure 6-2: Slot Context Data Structure
BUG=none
TEST=xHCI compiles
Change-Id: I0ae735af3d0840aeee846fa939c37af9aea3dff1
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45023
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently HECI3 gets enabled by the option Heci3Enabled, but this
duplicates the devicetree on/off options. Therefore depend on the
devicetree for enablement of the HECI3 controller.
All corresponding mainboards were checked if the devicetree
configuration matches the Heci3Enabled setting, and divergent
devicetrees were adjusted.
Change-Id: Ic7d52096aee225c2ced1e1bc29ca850fe5073edc
Signed-off-by: Felix Singer <felix.singer@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44579
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Previous CL (1916f8969b) misinterpreted
spec as requiring size alignment on all IVHD device entries. The correct
requirement specifies only for 4-byte entries. The unneeded realignments
result in gaps in the table. The kernel hangs in early boot due to the
malformed table.
Remove 8-byte entry alignment.
BUG=b:166519072
TEST=Boot fully to morphius board with and without amd_iommu kernel
parameter. Confirm IVRS contains no alignment gaps/corruption.
Change-Id: Iddcff98279be1d910936b13391dd2448a3bb2d74
Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45050
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
ddr_frequency is ambiguous and is interpreted differently in several
places. Instead of renaming this field, this deprecates it and adds
two new fields with unambiguous naming, max_speed_mts and
configured_speed_mts. smbios.c falls back to using ddr_frequency
when either of these fields are 0.
The same value was being used for both configured memory speed and
max memory speed in SMBIOS type 17, which is not accurate when
configured speed is not the max speed.
BUG=b:167218112
TEST=Boot ezkinil, no change to dmidecode -t17
Change-Id: Iaa75401f9fc33642dbdce6c69bd9b20f96d1cc25
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44549
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To allow using the 3 remaining Comet Lake SoCs, add a new Kconfig option
for each of them and configure the paths to FSP header files and FSP
binary.
Change-Id: I4272a6ee08e19769a8a17c93bb3ce2421be0bbc9
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44954
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Michael Niewöhner
Since there are 4 different versions of FSPs for the Comet Lake
platform, add a new Kconfig option for the currently used SoC being able
to differ between the various SoCs and FSPs.
The new Kconfig option selects the Comet Lake SoC as base for taking
over its specific configuration and is only used for configuring the
path to its specific FSP header files and FSP binary.
Also, adjust all related mainboards so that their Kconfig selects the
new option.
For details, please see
https://github.com/intel/FSP/tree/master/CometLakeFspBinPkg
Built System76/lemp9 with BUILD_TIMELESS=1 before and after this patch
and both images are equal.
Change-Id: I44b717bb942fbcd359c7a06ef1a0ef4306697f64
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44952
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
While GMP supports fat builds on x86 that adapt to the CPU's
capabilities, by default it builds for the CPU of the builder.
Running that binary on an older CPU then can fail.
Change-Id: Iafdc2eb696189b9e2c5ead316f310d98c949ef74
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45044
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This allows a platform to specify the location of the signing token
for the PSP verstage, and build it into the firmware image.
BUG=b:166108929
TEST=Build file into PSP firmware, verify that it's present and has
the correct ID.
BRANCH=Zork
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I182ad9b48a2776ccd29ead0f54cfe14c5bf45560
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44989
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Eric Peers <epeers@google.com>
To use a signed PSP verstage, we're going to need to build it first,
then sign and store the binary. This patch allows the stored (signed)
verstage binary to be used.
BUG=b:166108929
TEST=Build with existing verstage binary instead of re-building it.
BRANCH=Zork
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I5cbceca3b75f05c5460190b1c829d1ffaab2c736
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Eric Peers <epeers@google.com>
Add the field for the PSP verstage signature entry. This adds the
public key signing token to the PSP Directory table to verify the signed
PSP verstage binary
BUG=b:166100797
TEST=Build in a file and verify that it's present with the correct ID.
BRANCH=Zork
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I7525045d8746b6857979d07b02758ab4d4835026
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44987
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Eric Peers <epeers@google.com>
GCC9 introduced a new warning [-Waddress-of-packed-member]. This
is giving the following warning when building amdfwtool: warning: taking
address of packed member of ‘struct _bios_directory_entry’ may result in
an unaligned pointer value. Looking at the definition of the struct, it
looks like this is probably true.
Since the function being called doesn't read from the values, zeroing
them out in the beginning of the function, the code just passes pointers
to the temporary variables without initializing them.
BUG=None
TEST=Build & use AMD firmware table.
BRANCH=Zork
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I2f1e0aede8563e39ab0f2ec6daed91d6431eac43
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44986
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Eric Peers <epeers@google.com>
Move PSP_SHAREDMEM_DRAM_END after _etransfer_buffer to ensure that the
transfer buffer actually lives within the 32KiB that is supported to be
transferred. Resulting symbol address change in bootblock.debug file
summarized below.
BEFORE:
02011000 T _psp_sharedmem_dram
02011000 T _transfer_buffer
02011000 T _transfer_info
02011040 T _etransfer_info
02011040 T _vboot2_work
02014040 T _evboot2_work
02019000 T _epsp_sharedmem_dram
02019000 T _preram_cbmem_console
0201a600 T _epreram_cbmem_console
0201a600 T _timestamp
0201a800 T _etimestamp
0201a800 T _fmap_cache
0201ac52 T _efmap_cache
0201ac52 T _etransfer_buffer
AFTER:
02011000 T _psp_sharedmem_dram
02011000 T _transfer_buffer
02011000 T _transfer_info
02011040 T _etransfer_info
02011040 T _vboot2_work
02014040 T _evboot2_work
02014040 T _preram_cbmem_console
02015640 T _epreram_cbmem_console
02015640 T _timestamp
02015840 T _etimestamp
02015840 T _fmap_cache
02015c92 T _efmap_cache
02015c92 T _etransfer_buffer
02019000 T _epsp_sharedmem_dram
BUG=b:167243965
BRANCH=None
TEST=checked 'cbmem -1' for FMAP error after ec reboot
Signed-off-by: Josie Nordrum <josienordrum@google.com>
Change-Id: I9b482aced5deb40bd87d19d9c42585d8a6db5fc0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45045
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some Trogdor variants power their USB hub from a PMIC LDO that is
already enabled by QcLib, and some have a discrete LDO that is
controlled by GPIO_84. For the latter, let's make sure we assert that
GPIO on boot.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I9d206cd7154ded3bf179e68c2b1421d0a8ee89f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44744
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: mturney mturney <mturney@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Philip Chen <philipchen@google.com>
We're moving a lot of pins around on Trogdor again. For firmware this
only affects the RAM and SKU strapping ID pins. Since there are quite a
few of the old devices in circulation this time and some people seem to
care about mosys RAM information working, let's actually check the board
revision and support both cases this time.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: If7728d8ea4b7f6e7ff6721ade90f975f6efd5ddd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44949
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Philip Chen <philipchen@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
1. Add new SPD file, "samsung_dimm_K4E8E324ED-EGCG.spd.hex".
2. Add SPD support in Rammus memory table, as follows:
SPD_SOURCES += samsung_dimm_K4E8E324ED-EGCG # 0b0110
SPD_SOURCES += samsung_dimm_K4E6E304ED-EGCG # 0b0111
BUG=b:166576463
BRANCH=firmware-rammus-11275.B
TEST=emerge-rammus coreboot chromeos-ec chromeos-bootimage
Flash FW to DUT, and make sure system boots up.
Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com>
Change-Id: I82386507c4e996e0a59c26ce50de3bced45b1196
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44854
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
BUG=b:153888802
TEST=Able to list correct eSPI frequency as per TGL SPI flash guide
Without this CL :
Found Component Section
FLCOMP 0x093030f6
Dual Output Fast Read Support: not supported
Read ID/Read Status Clock Frequency: 50MHz
Write/Erase Clock Frequency: 50MHz
Fast Read Clock Frequency: 50MHz
Fast Read Support: supported
Read Clock Frequency: 20MHz
With this CL :
Found Component Section
FLCOMP 0x093030f6
Dual Output Fast Read Support: not supported
Read ID/Read Status Clock Frequency: 50MHz
Write/Erase Clock Frequency: 50MHz
Fast Read Clock Frequency: 50MHz
Fast Read Support: supported
Read eSPI/EC Bus Frequency: 60MHz
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I20840e6f931d7c1fabea0b6892e3bd19ead81168
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44820
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
BUG=b:153888802
TEST=Able to list correct SPI frequency as per TGL SPI flash guide
Without this CL :
Found Component Section
FLCOMP 0x093030f6
Dual Output Fast Read Support: not supported
Read ID/Read Status Clock Frequency: 33MHz
Write/Erase Clock Frequency: 33MHz
Fast Read Clock Frequency: 33MHz
Fast Read Support: supported
Read Clock Frequency: 20MHz
With this CL :
Found Component Section
FLCOMP 0x093030f6
Dual Output Fast Read Support: not supported
Read ID/Read Status Clock Frequency: 50MHz
Write/Erase Clock Frequency: 50MHz
Fast Read Clock Frequency: 50MHz
Fast Read Support: supported
Read Clock Frequency: 20MHz
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: Id0a0a0cbd948ef8334cf522c09e881b464e87f0e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44819
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Consider IBEX_PEAK onwards all chipsets are belong to PCH family.
BUG=b:153888802
TEST=Able to print correct PCH revision on Hatch Platform.
> ifdtool -d coreboot.rom
Without this CL :
ICH Revision: 300 series Cannon Point/ 400 series Ice Point
With this CL :
PCH Revision: 300 series Cannon Point/ 400 series Ice Point
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: Ifd40dddc9179f347c0ea75149ec08089a829fdb4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44816
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This patch converts the current DPTF policies from static ASL files into
the new SSDT-based DPTF implementation. All settings are intended to be
copied exactly.
BUG=b:158986928
BRANCH=puff
TEST=duffy boots and dumped SSDT table for quick check.
Change-Id: I45987f44ec381917173f8d2a878edb50da454b4b
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44905
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The bus master bit is set at many places in coreboot's code, but the
reason for that is not quite clear. We examined not setting the
bus master bit whereever possible and tried booting without it,
which worked fine for internal PCI devices but not for PCIe. As a PCIe
device we used a Samsung M.2 NVMe SSD.
For security reasons, we would like to disable bus mastering where
possible. Depending on the device, bus mastering might get enabled
by the operating system (e.g. for iGPU) and it might be required for
some devices to work properly. However, the idea is to leave it disabled
and configure the IOMMU first before enabling it.
To have some sort of "backwards compatibility", add a method which
configures bus mastering based on an additional config option. Since
CB:42460 makes usage of this treewide, enable it by default to keep the
current behaviour for now.
Tested with Siemens/Chili, a Coffee Lake based platform.
Change-Id: I876c48ea3fb4f9cf7b6a5c2dcaeda07ea36cbed3
Signed-off-by: Felix Singer <felix.singer@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42459
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GPIO_144 is REPORT_EN pin for the touchscreen controller where 1 means
enable operation and 0 means stop operation. Override tree exposes
this pin as stop GPIO. Thus, it needs to be configured as active low
i.e. 0 = active (stop), 1 = inactive (enable report).
Change-Id: I349123655260349b78d2f75f846da0ce1dc966fc
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44911
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
v3.6+ of reference schematics have moved to using active low polarity
for touchscreen GPIO. This change sets the default polarity in
override tree accordingly to active low. To support boards from older
builds, variant_touchscreen_update() already updates the polarity to
active high.
BUG=b:161937506
Change-Id: I370bdb27ea5d0601612d13b515113a6048018964
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44909
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Clone entirely from Jasperlake
List of changes on top off initial jasperlake clone
1. Replace "Jasperlake" with "Elkhartlake"
2. Replace "jsl" with "ehl"
3. Rename structure based on Jasperlake with Elkhartlake
4. Clean up upd override in fsp_params.c, will be added later
5. Temporarily remove _weak attributes in fsp_param & romstage.c
6. Add required headers into include/soc/ from jasperlake directory
Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com>
Change-Id: If2bbe0b8a12bb78b3650f9d0a60f002f7eacb513
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44801
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Clone entirely from Jasperlake
This patch is based on TGL_upstream series patches:
https://review.coreboot.org/c/coreboot/+/36550
List of changes on top off initial jasperlake clone
1. Replace "Jasperlake" with "Elkhartlake"
2. Replace "jsl" with "ehl"
3. Rename structure based on Jasperlake with Elkhartlake
6. Add required headers into include/soc/ from JSL directory
Elkhart Lake specific changes will follow in subsequent patches.
1. soc/intel/elkhartlake: Update Kconfig
Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com>
Change-Id: I9f91c1efa81a358b1f59e032e209e07b62d54613
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Able to uniquely identify the chipset without specifying the platform
specific quirks (adl/cnl/icl/jsl/tgl etc.).
BUG=b:153888802
TEST=Able to dump FD contains correctly without specifying platform
quirks on Hatch Platform.
> ifdtool -d coreboot.rom
Without this CL :
ICH Revision: 100 series Sunrise Point
With this CL :
ICH Revision: 300 series Cannon Point/ 400 series Ice Point
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I83763adb721e069343b19a10e503975ffa6abb24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44815
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- Use a new variable to store the list of warning types;
- print this list when building an image.
TEST = build image on Kontron mAL-10 COMe module:
IASL 3150 2158 3133 warning types were ignored!
IASL build/dsdt.aml disassembled correctly.
Change-Id: I46f761612254b400563f8567be9bd61601f23467
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Make the general purpose PCIe clock outputs configurable to be either
permanently enabled, permanently disabled or dynamically enabled via
their corresponding external #CLK_REQx pins in the board's devicetree.
BUG=b:149970243
BRANCH=zork
Change-Id: I3f5760c0b869e8a9416ba9b57d182a88a2eb5e44
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44889
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The _SHIFT postfix is a bit clearer than the _SHL one and more in line
with the names used for this kind of defines in coreboot. The
documentation on that register is currently wrong and will hopefully be
fixed in the future; the defines should now match the hardware.
BUG=b:149970243
BRANCH=zork
Change-Id: I977f107d466521484ca13fa1f4dd86a50c8150d7
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44888
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Replacing the existing defines with macros makes them easier to use in a
function that applies the setting for a certain GPP/GFX clock output.
Also add macros for statically enabling or disabling the clock outputs
and not only for configuring them as controlled by the #CLK_REQx pins.
BUG=b:149970243
BRANCH=zork
Change-Id: I14198f224639721fe6ca71ca3dcd9cb413a587d5
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44887
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Updating from commit id ace23683b:
2019-09-27 Merge changes from topic "ld/stm32-authentication" into
integration
to commit id a4c979ade:
2020-08-26 Merge changes I6bf1db15,I8631c34a,Id76ada14 into integration
This brings in 1825 new commits.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Id26301dae421eec61c10a2d18842053f3228c557
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44885
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We do not need to set the CS (Command Stop) bit in the Command Ring
Control Register. CS is implied by CA (Command Abort). I'm not sure if
there is a defined execution order for these command bits, so it's
safer to only use the CA bit as it includes the CS function.
Ref: xHCI spec 1.2 (May 2019), Section 5.4.5, Table 5-24.
BUG=b:160354585,b:157123390
TEST=able to boot into recovery using USB stick on servo v2 on volteer
as well as HooToo 8-1 hub
Change-Id: Iaeba98b6da8da49f529358ca6d68270440ea0f42
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44876
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This fixes issues with how we handle events generated by the xHCI
"command abort" command. first, depending on the state of the xHCI
controller, the COMMAND_ABORTED may not be generated. If the
controller was between commands, only the COMMAND_RING_STOPPED event
will be generated. Second, do not adjust the command ring "cur"
pointer as that just confuses the controller.
BUG=b:160354585,b:157123390
TEST=able to boot into recovery using USB stick on servo v2 on volteer
as well as HooToo 8-1 hub
Change-Id: I055df680d1797f35d9730e2bfdb4119925657168
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44875
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Some Linux kernel drivers bind to "DMI quirks." In this case, the audio
fw_config is added as an OEM string, e.g., "AUDIO-MAX98357_ALC5682I_I2S"
so the audio topology can be correctly discovered.
But add all successfully probed fw_config items as well, because this
makes it easier to view what is selected from userspace.
BUG=b:161963281
TEST=With CBI FW_CONFIG field set to 0x201:
localhost ~ # dmidecode -t 11
# dmidecode 3.2
Getting SMBIOS data from sysfs.
SMBIOS 3.0 present.
Handle 0x0009, DMI type 11, 5 bytes
OEM Strings
String 1: DB_USB-USB4_GEN2
String 2: AUDIO-MAX98373_ALC5682I_I2S
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I7b7586b0ebfe7b2fd888f448a50ae086364fa718
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44783
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add a backing cache for all successfully probed fw_config fields that
originated as `probe` statements in the devicetree. This allows recall
of the `struct fw_config` which was probed.
BUG=b:161963281
TEST=tested with follower patch
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I0d014206a4ee6cc7592e12e704a7708652330eaf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Marking dependencies has undergone some change in Chrome OS tree. The
script to cherry-pick the changes to ChromeOS tree prepends "Original-" to
the concerned meta data i.e. Cq-Depend becomes Original-Cq-Depend. This
causes dependencies to not take effect when changes are submitted to the
continuous integration. Do not prepend "Original-" to the dependency
meta data.
BUG=None
TEST=Ensure that the Cq-Depend line is added without any prefix.
Change-Id: I0503234954f872ee56708e19e89cae9d9fa30df7
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
GPP_F11 was in the early gpio table, but the definition was missing
from the main gpio_table. This change adds GPP_F11 to the gpio_table
array.
BUG=none
TEST="emerge-volteer coreboot" and verify it builds correctly.
Change-Id: I40f887300a9dfd4f8e790031b77bbee8a014f499
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44745
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Add Makefile.inc to include six generic DDR4 SPDs for the following
parts for Eldrid:
DRAM Part Name DRAM ID to assign
H5AN8G6NDJR-XNC 0 (0000)
MT40A512M16TB-062E:J 1 (0001)
H5ANAG6NCMR-XNC 2 (0010)
K4A8G165WC-BCWE 0 (0000)
K4AAG165WA-BCWE 3 (0011)
MT40A1G16KD-062E:E 3 (0011)
Add mem_list_variant.txt as a manifest of eldrid's DRAM parts for use
by gen_spd, the generic DD4 SPD generation tool.
Add dram_id_generated.txt to specify DRAM ID strap settings.
NOTE that Eldrid specified DRAM IDs for the first three parts to be 0
though 2 (i.e. no combined DRAM IDs for parts that use the same SPD).
BUG=b:161772961
TEST="FW_NAME=eldrid emerge-volteer coreboot" and verify it builds
without error.
Change-Id: Ica62e299ed40e60c2d5928b29ead5d2205b1af66
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44272
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This SuperIO chip is used on the Intel DQ45EK mainboard. Restore the
driver that was deleted in commit d3a1a4171e ("src/superio: Remove
unused superio chips"). Changes from the previous version include:
- Replacing the early serial implementation with Winbond common code,
- Replacing the license boilerplate with SPDX headers, and
- Removing unnecessary header file references.
Change-Id: I0ff1a63c47d5dff2599c83a1cebe1ac5ff2136b1
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44695
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Disable internal pull-ups for SATAXPCIE pads since there are external
ones at the M.2 slot's PEDET pins.
Test: both, SATA and NVME devices work fine on both slots
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I6be716620695ac38c44a17abe1c4de97b099b8d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43645
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There are pads being unused for various reasons:
a) missing board support (DeepSx: SUSWARN#)
b) unneeded feature ID pins
- currently no known device models without keyboard backlight
- currently no known device models without TPM
c) BOARD_ID (L140CU/L140ZU) is fixed and known at build time
d) DDR_TYPE_*: there is only one known ram model
e) strap-only pads
f) unconnected pads
Configure them as NC with appropriate pull-up if no external pull exists.
The latter was checked by schematics and looking at the board.
When any of the unused ID pins is needed in the future, they can be
reactivated easily (configure as GPI).
Further, convert from use of legacy macro PAD_CFG_NC to PAD_NC.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: Ia370c180d5ae6f48360be14af3cbab29e6814e75
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43644
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To support CSE Lite firmware update, CSE RW partition is extracted from
CSE blob binary and added to FW_MAIN_A and FW_MAIN_B.
CSE RW size for TGL is close to 2.3MB; hence, the size of FW_MAIN_A and
FW_MAIN_B is increased to avoid an overflow.
BUG=b:140448618
TEST=build with me_rw binary blob for volteer and boot to kernel.
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Change-Id: Ie3c2b657f0426d206dfe3729829ec34ff57812c7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43790
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
L140CU has a TPM2 connected via SPI. Add the TPM device to the
devicetree and enable it.
According to Intel doc#615170-001, PIRQ is required for SPI TPM to work.
Since the TPM is connected to GPP_A7, enable NF1 (PIRQA#) and set it as
TPM interrupt in Kconfig.
Note: The PCH maps either LPC TPM or SPI TPM to the same address and
handles either LPC or SPI communication transparently. Thus we can use
MAINBOARD_HAS_LPC_TPM here, which implements TPM via that address.
Tested, but only polling works currently, because there is some upstream
issue with the tpm_tis module in current Linux kernels. [1]
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1770021
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I26d3b396fe1e99368e18fd3a6a9f02e3585b9f6e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43641
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This is a security lock and is required for TXT, among other things.
Tested on Asrock B85M Pro4, still boots.
Change-Id: I7b2e8a60ce92cbf523c520be0b365f28413b9624
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44884
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fix an issue the assembler didn't warn about to fix a crash on real
hardware. qemu didn't catch this issue either.
The linker uses the same address for variables in BSS if they aren't
initialized in the code. This results in %edx being set to the value
of %eax, which causes an exception restoring IA32_EFER on real
hardware.
Tested on qemu with KVM enabled.
Change-Id: Ie36a88a2a11a6d755f06eff9b119e5b9398c6dec
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44780
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
We can now factor out the essentially duplicated ME functions.
We include a .c file to preserve reproducibility. This is needed because
there are two different `mei_base_address` global variables, and we have
to access the same variables in order for builds to be reproducible.
The duplicate global in `me.c` and `me_8.x.c` will be completely gone
once this new `me_common.c` file becomes a standalone compilation unit.
We are wrapping some things in static inline functions, as they won't be
directly accessible anymore after moving to a separate compilation unit.
Tested with BUILD_TIMELESS=1, Asus P8Z77-V LX2 remains identical.
Change-Id: I057809aa039d70c4b5fa9c24fbd26c8f52aca736
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42012
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Michael Niewöhner
Add support for 10th-gen/Comet Lake-U based boards:
- add PCI IDs for host bridge, IGD, LPC devices
- add support for dumping GPIOs, PCRs, etc
Tested on an unbranded CML-U board running AMI firmware
Change-Id: I44871917565fc628fd1073a6e5c36b6a3246a61c
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44301
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Add vb2ex_hwcrypto_rsa_verify_digest function for verifying rsa
signature against digest using PSP svc.
This function will be later used by vboot to accelerate rsa
verification.
BUG=b:163710320, b:161205813
TEST=build zork firmware with vboot modification, confirm it's booting
and boot time is reduced by ~230ms.
Change-Id: Ic5c1d13092db5a84191642444f3df9c26925e475
Signed-off-by: Kangheui Won <khwon@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44456
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Updating from commit id 3932b1c:
2020-08-19 02:09:04 +0000 - inclusive: change usage of
blacklist/whitelist
to commit id fefcaa6:
2020-08-24 04:32:03 +0000 - vboot: adjust VB2_SECDATA_KERNEL_FLAGS in
non-recovery path
This brings in 2 new commits.
Change-Id: Ia3ff764537b91f76ba6fa3ba2646638964800510
Signed-off-by: Kangheui Won <khwon@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44732
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
For payloads with UI based on CBGFX, they usually start by calling
clear_canvas or clear_screen and then draw the UI elements. However,
that makes the screen flicker.
A typical solution is to identify and minimize the area to redraw.
However for payloads with complicated UI and do not care about latency,
an alternative is to enable buffered I/O.
The new enable_graphics_buffer() will redirect all graphics I/O
into an invisible working buffer. To flush (redraw) the buffer to the
real screen, call flush_graphics_buffer(). To stop buffering, call
disable_graphics_buffer().
BUG=None
TEST=Add the enable, flush and disable calls to payload 'depthcharge',
built a firmware and boots into Chrome OS recover UI. No more
flickering. The average rendering time on x86 platform is 1.2ms.
Change-Id: Id60a2824fd9e164feae16b92b68b003beabea8d3
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44654
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SATA is currently turned on in the Dalboz and Trembyle base board
variant devicetrees, even though no Google/Zork device uses SATA; for
mass storage they either use eMMC or NVME PCIe SSDs. This patch disables
both the SATA PCIe device and the bus where it was the only enabled
device on. The next patch in this patch train sets a new FSP-M UPD
setting
BUG=b:162302027
Change-Id: Ie7773d9dcb0518c3e01bdd0af23b62268ab64694
Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44068
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
FSP has recently added support for a UPD switch to power gate SATA. This
change adds the coreboot side of the feature. To avoid having two SATA
enable options, the value of the sata_enable UPD is determined by the
enable state of the AHCI controller in the platform devicetree.
BUG=b:162302027
BRANCH=zork
TEST=Verify AHCI controller can be hidden/disabled.
Change-Id: I48bf94a7e6249db6079a6e3de7456a536d54a242
Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44067
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Intel CPX-SP FSP ww34 release added some features:
a. change DDR frequency limit.
b. define MRC debug message verbosity level.
c. enable/disablee of PCH DCI.
In addition, there are some changes to HOB data structures.
Update UPD and HOB header files and adapt soc accordingly.
TESTED=booted on YV3 DVT to target OS command line. Also rebooted okay.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: Iadbf5dc850c445f988bc7f07a24165abed2298c8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44685
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These parts have not been used in any woomax devices. Removing
so IDs can be assigned more efficiently.
Command to generate files:
go build gen_part_id.go
local variant=woomax
./gen_part_id ../../../src/mainboard/google/zork/spd ../../../src/mainboard/google/zork/variants/${variant}/spd/ ../../../src/mainboard/google/zork/variants/${variant}/spd/mem_parts_used.txt
BUG=b:165611555
TEST=none
Change-Id: I651539c2df8e6d817582573d45b9e77156ece7d4
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44872
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
These parts have not been used in any berknip devices. Removing
so IDs can be assigned more efficiently.
Command to generate files:
go build gen_part_id.go
local variant=berknip
./gen_part_id ../../../src/mainboard/google/zork/spd ../../../src/mainboard/google/zork/variants/${variant}/spd/ ../../../src/mainboard/google/zork/variants/${variant}/spd/mem_parts_used.txt
BUG=b:165611704
TEST=none
Change-Id: I9020fc9cbbb4a97664b0c969dd841c5696a4d60f
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44871
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These parts have not been used in any dirinboz devices. Removing
so IDs can be assigned more efficiently.
Command to generate files:
go build gen_part_id.go
local variant=dirinboz
./gen_part_id ../../../src/mainboard/google/zork/spd ../../../src/mainboard/google/zork/variants/${variant}/spd/ ../../../src/mainboard/google/zork/variants/${variant}/spd/mem_parts_used.txt
BUG=b:165611271
TEST=none
Change-Id: I605550d44ba57d979df1bd5bef114f8ecc94fa3a
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44846
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Switch all zork boards to use generated generic SPDs from spd_tools.
HMAA1GS6CMR6N-VK is unused by Ezkinil, and all other boards, so it was
removed.
picasso/Makefile.inc was updated to populate the 2nd APCB channel based
on APCB_POPULATE_2ND_CHANNEL. This removes the need to suffix spd
entires with _x1/_x2.
Command to generate files:
$ find src/mainboard/google/zork/variants/ -maxdepth 1 -type d | grep -v '/$' | while read b; do
n=$(basename ${b});
if [ "${n}" = "baseboard" ]; then
continue
fi
go run util/spd_tools/ddr4/gen_part_id.go src/mainboard/google/zork/spd \
src/mainboard/google/zork/variants/${n}/spd \
src/mainboard/google/zork/variants/${n}/spd/mem_parts_used.txt
done
BUG=b:162939176
TEST=Boot ezkinil and dalboz check dmidecod -t17
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I0553858f83d3d1e90cf35bece108768f004a29a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44480
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add mem_list_variant.txt, a list of memory parts used by elemi SKUs.
Add dram_id.generated.txt, a list of dram id's to use for each memory part.
Add Makefile.inc, to specify DDR4 and build the SPD file list.
BUG=b:165461530
TEST=none
Change-Id: I6dbcccf577161cc0c787775e2ac03e0c7039baef
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44650
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add memory parts needed by zork boards. Attributes are derived from data
sheets.
BUG=b:162939176
TEST=Compared generated SPDs with data sheets and checked in SPDs
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I67f205f9af24bbc5c12656be1f363a15fe975955
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44447
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If a memory part is a x16 part that has two dies and only a single
rank, then the x16 describes the part width (since this solution will
need to be a stacked solution) and as such, we must translate the
DeviceBusWidth to the "die bus width" instead.
Change DeviceBusWidth variable name to PackageBusWidth to be more
descriptive
BUG=b:166645306, b:160157545
TEST=run gen_spd and verify that spds for parts matching description
above changed appropriately.
Change-Id: Ia6f3ca109d344b7a015da28125a94ce10d2bdfb8
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44870
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The TS_DONE_LOADING timestamp description had "(ignore for x86)", but
the implementation in vboot_logic.c will read every bytes, so the
timestamp is correct even for devices with memory mapped boot device
(e.g., x86).
To prevent confusion we should remove the 'ignore for x86' message.
BUG=None
TEST=make -j
BRANCH=None
Change-Id: I01d11dd3dd0e65f3a17adf9a472175752c2b62bc
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44800
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
I noticed that re-running the lpddr4x SPD parts id tool that generates
the variants/VARIANT_NAME/memory/Makefile.inc changed the SPD that is
used for the H9HCNNNCPMMLXR-NEE part.
$ go run ./util/spd_tools/lp4x/gen_part_id.go \
src/soc/intel/tigerlake/spd src/mainboard/google/volteer/variants/delbin/memory
src/mainboard/google/volteer/variants/delbin/memory/mem_list_variant.txt
Based on the currently checked in generic SPDs for LPDDR4x, this
operation changes the Makefile.inc to use lp4x-spd-3.hex for the
H9HCNNNCPMMLXR-NEE part instead of lp4x-spd-2.hex.
This change updates that discrepancy in Delbin's memory Makefile.inc.
BUG=none
TEST=none
Change-Id: I9a19ab7b1bcdc3814fdd9c462ca2f590c8ed2935
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44785
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For boards that have already assigned memory ids, there needs to be a
way to fix parts to a specific id. After assigning all the fixed ids the
tool still attempts to minimize the SPDs entries. Since a fixed ID could
be anywhere, gaps can be created in the list. So an empty SPD entry is
created to fill the gaps in the list until they are used.
BUG=b:162939176
TEST=Generate various outputs
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I1f8ea1ff4f33a97ab28ba94896a1054e89189576
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Change lp4x spd names to include lp4x memory type (eg. lp4x-spd-1.hex).
BUG=b:160157545
TEST=run gen_part_id for volteer variants and verify that it changed
spd names to prepend the "lp4x-" to the filename..
Change-Id: I0c59da7eb78f34640aad2e852ca725d3e8571a8e
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44784
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Now that generic SPD files have the memory type prepended to the
filename, they can be stored in the same location. This CL moves
the generic SPDs to the new location.
Change the ddr4 gen_part_id.go and gen_spd.go tools to use
"ddr4_spd_manifest.generated" instead of "spd_manifest.generated".
Change the lpddr4x gen_part_id.go and gen_spd.go tools to use
"lp4x_spd_manifest.generated" instead of "spd_manifest.generated".
Move TGL DDR4 and LPDDR4x generic SPDs into a common location.
Move JSL DDR4 and LPDDR4x generic SPDs into a common location.
Change the volteer/spd/Makefile.inc to use the new path for the spds.
Change the dedede/spd/Makefile.inc to use the new path for the spds.
BUG=b:165854055
TEST="emerge-volteer coreboot" and verify all variants build correctly.
Change-Id: I83b088cb718d15ffd3012c84a12b5231ae84a3e4
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44648
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It seems that GCC's LTO doesn't like the way we implement
DECLARE_OPTIONAL_REGION(). This patch changes it so that rather than
having a normal DECLARE_REGION() in <symbols.h> and then an extra
DECLARE_OPTIONAL_REGION() in the C file using it, you just say
DECLARE_OPTIONAL_REGION() directly in <symbols.h> (in place and instead
of the usual DECLARE_REGION()). This basically looks the same way in the
resulting object file but somehow LTO seems to like it better.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I6096207b311d70c8e9956cd9406bec45be04a4a2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
DRIVERS_WIFI_GENERIC is a dependency for these SAR settings.
However, coreboot.org builders are not failing, but chromium
builders are only for serial configurations. It's not clear as
to why. Either way correct this.
BUG=b:159304570
Change-Id: I978b622a3a5a2490b0e3aaa14c24807d5afdff9a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44825
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Most of the code is generated using autoport.
Working:
* booting Arch Linux from SeaBIOS
* PCIe/SATA/USB ports (see overridetree and early_init for lists)
* LVDS, DisplayPort, VGA, 3.5 mm jacks, RJ-45
* keyboard, touchpad
* C-States, S3 suspend
Not working:
* rfkill hotkey
* color of the mute hotkey
* sleep f-key
Untested:
* internal speakers and microphone (defective on my machine)
* FireWire
* docking station
* TPM (SeaBIOS detects it, no further test done)
Signed-off-by: Pablo Stebler <pablo@stebler.xyz>
Change-Id: I916583fad375f16e5b02388cbcad2e8a993e042f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Returning a const uint32_t doesn't do anything, and it conflicts with the
declaration of sku_id() in include/boardid.h.
Change-Id: I2719e5782c9977f8ca4ce8f1dd781f092aa73d64
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1428708
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44746
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Removing entry covering root region leads to situation where
num_entries counter is set to 0. This counter is further decremented
in function obtaining address to last entry (see root_last_entry()).
Such negative number may be further used as an index to the table.
Current implementation may lead to crash, when user removes last entry
with imd_entry_remove() and then calls for example imd_entry_add().
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Change-Id: I6ff54cce55bf10c82a5093f47c7f788fd7c12d3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
One of the checks inside imdr_recover() was written with the
assumption that imdr limit is always aligned to LIMIT_ALIGN. This is
true only for large allocations, thus may fail for small regions.
It's not necessary to check if root_pointer is under the limit, since
this is implicitly verified by imdr_get_root_pointer().
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Change-Id: I25d6291301797d10c6a267b5f6e56ac38b995b7b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Previously it was allowed to create an imd_entry with size 0, however
algorithm sets the offset of such entry to the exact same address as
the last registered entry.
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Change-Id: Ifa2cdc887381fb0d268e2c199e868b038aafff5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Add a check that root_size provided by the caller accounts for one
imd_entry necessary for covering imd_root region. Without this, we
may end up with writing on unallocated memory.
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Change-Id: I0a39d56f7a2a6fa026d259c5b5b78def4f115095
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
This reverts commit 81066b7ce7.
Reason for revert: The hang observed when not exposing the reset GPIOs was root caused to zork sharing the same I2C bus between touchscreen and touchpad and interleaving of messages during probe which resulted in incorrect information returned back by touchscreen firmware. Exposing the reset GPIO changed the timing of probe and hence helped workaround the hang issue. The touchscreen driver is now fixed to perform I2C transactions in a single transfer and so the hang is no longer observed when reset GPIO isn't exposed.
BUG=b:162596241
BRANCH=zork
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ica11c33d542dd2324bb0b8905c5de06047cee301
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add "MEMORY_TYPE = lp4x" to the generated Makefile.inc to indicate
this is lpddr4x memory and to use the generic SPDs from the lpddr4x
respository of SPDs.
BUG=b:160157545
TEST=run gen_part_id for volteer and verify that it adds the line "MEMORY_TYPE =
lp4x" to the makefile produced.
Change-Id: I416690ae8aff8052474b16ef0d3e940e72e6a2fb
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44647
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Serial Presence Detect (SPD) data for memory modules is used by Memory
Reference Code (MRC) for training the memory. This SPD data is
typically obtained from part vendors but has to be massaged to format
it correctly as per JEDEC and MRC expectations. There have been
numerous times in the past where the SPD data used is not always
correct.
In order to reduce the manual effort of creating SPDs and generating
DRAM IDs, this change adds tools for generating SPD files for DDR4
memory used in memory down configurations on Intel Tiger Lake (TGL)
based platforms. These tools generate SPDs following JESD79-4C and
Jedec "4.1.2.L-5 R29 v103" specification.
Two tools are provided:
* gen_spd.go: Generates de-duplicated SPD files using a global memory
part list provided by the mainboard in JSON format. Additionally,
generates a SPD manifest file (in CSV format) with information about
what memory part from the global list uses which of the generated
SPD files.
* gen_part_id.go: Allocates DRAM strap IDs for different DDR4
memory parts used by the board. Takes as input list of memory parts
used by the board (with one memory part on each line) and the SPD
manifest file generated by gen_spd.go. Generates Makefile.inc for
integrating the generated SPD files in the coreboot build.
BUG=b:160157545
Change-Id: I263f936b332520753a6791c8d892fc148cb6f103
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
If there's already been an error and PSP_verstage is booting to RO,
don't reset the system. It may be that the error is fatal, but if the
system is stuck, don't intentionally force it into a reboot loop.
BUG=None
TEST=Force an error, still boots to RO instead of going into a boot loop
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: Ibb6794fefe9d482850ca31b1d3b0d145fcd8bb8f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44652
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Instead of halting if the vboot workbuf is not passed to coreboot by the
PSP, reset and reboot into recovery mode.
This process is made more difficult because if the workbuf isn't
available, we can't reboot directly into recovery - the workbuf is
needed for that process to be done through the regular calls, and we
don't want to go around the vboot API and just write into VBNV directly.
To overcome this, we set a CMOS flag, and reset the system.
PSP_verstage checks for this flag so it will update VBNV and reset the
system after generating the workbuf.
BUG=b:152638343
TEST=Simulate the workbuf not being present and verify the reboot
process.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I049db956a5209904b274747be28ff226ce542316
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44538
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
We need to pull update_mrc_cache into mrc_cache_stash_data, so moving
to end of the file to make sure update_mrc_cache is defined before.
BUG=b:150502246
BRANCH=None
TEST=Testing on a nami (x86) device:
reboot from ec console. Make sure memory training happens.
reboot from ec console. Make sure that we don't do training again.
Signed-off-by: Shelley Chen <shchen@google.com>
Change-Id: I9e14fec96e9dabceafc2f6f5663fc6f1023f0395
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44195
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Create two new functions to fetch mrc_cache data (replacing
mrc_cache_get_current):
- mrc_cache_load_current: fetches the mrc_cache data and drops it into
the given buffer. This is useful for ARM platforms where the mmap
operation is very expensive.
- mrc_cache_mmap_leak: fetch the mrc_cache data and puts it into a
given buffer. This is useful for platforms where the mmap operation
is a no-op (like x86 platforms). As the name mentions, we are not
freeing the memory that we allocated with the mmap, so it is the
caller's responsibility to do so.
Additionally, we are replacing mrc_cache_latest with
mrc_cache_get_latest_slot_info, which does not check the validity of
the data when retrieving the current mrc_cache slot. This allows the
caller some flexibility in deciding where they want the mrc_cache data
stored (either in an mmaped region or at a given address).
BUG=b:150502246
BRANCH=None
TEST=Testing on a nami (x86) device:
reboot from ec console. Make sure memory training happens.
reboot from ec console. Make sure that we don't do training again.
Signed-off-by: Shelley Chen <shchen@google.com>
Change-Id: I259dd4f550719d821bbafa2d445cbae6ea22e988
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44006
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move interrupt status and wake status clearing to after GPIO config so
that configuration does not incorrectly set interrupt or wake status.
i.e. when PULL_UP is configured on a pad, it incorrectly sets in the
interrupt status bit. Thus, the interrupt status bit must be cleared
after initial pad configuration is complete.
BUG=b:164892883, b:165342107
TEST=None
BRANCH=None
Signed-off-by: Josie Nordrum <josienordrum@google.com>
Change-Id: If4a5db4bfa6a2ee9827f38e9595f487a4dcfac2c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44640
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Each variant WiFi SAR CBFS will be added with the default name
"wifi_sar_defaults.hex".
so we just need to look up the default CBFS file as the WiFi SAR
source.
BUG=b:159304570
BRANCH=zork
TEST=1. cros-workon-zork start coreboot-private-files-zork
2. emerge-zork chromeos-config coreboot-private-files-zork \
coreboot chromeos-bootimage
Change-Id: Idf859c7bdeb1f41b5144663ba1762e560dcfc789
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44672
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Jasper Lake SoC had PCI root port mapping swap, thats why we were
using swapped mapping earlier for all the boards
Recently, patch was pushed to handle this swap in PCI enumeration code
for Jasper Lake and we need to correct this mapping. Now this mapping
aligns with actual port mapping in the schematics
BUG=None
BRANCH=None
TEST=NVMe and WLAN are getting detected after this changes
Change-Id: Ide5f8419a15f559cefeb6039f155fabf97c279f8
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44391
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
pmc_set_acpi_mode will set EC SMI mask to 1 in the end.
However google_chromeec_events_init will clear EC SMI mask.
If google_chromeec_events_init is ran after pmc_set_acpi_mode, the EC SMI mask
will be 0 in depthcharge and causes lidclose function not working.
So, pmc_set_acpi_mode() should run after google_chromeec_events_init.
This code is mainly from CB:42677
BUG=b:16338215
TEST=Close lid in depthcharge and the dut can be shutdown on waddledoo.
Signed-off-by: Kane Chen <kane.chen@intel.com>
Change-Id: I0f06e8b5da00eb05a34a6ce1de6d713005211c08
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
default_memmove() calls memcpy() when (src > dst). This is safe for the
default_memcpy() implementation, but just calling memcpy() may invoke an
architecture-specific implementation. Architectures are free to
implement memcpy() however they want and may assume that buffers don't
overlap in either direction. So while this happens to work for all
current architecture implementations of memcpy(), it's safer not to rely
on that and only rely on the known implementation of default_memcpy()
for the forwards-overlapping case.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I7ece4ce9e6622a36612bfade3deb62f351877789
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44691
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GPP_D16 is routed to the main power enable pin on several PCIe SD card
controllers on SD daughterboards. We should enable the power to these
chips as early as possible so they can participate in PCIe
enumeration.
BUG=b:162722965
TEST=Verified RTS5261 and GL9755 daughterboards enumerate on PCI and
can read SD cards.
Change-Id: Icf5e770f540e5d1e27b40f270bb004f4196bc7be
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44117
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
JSL FSP support FSP 2.2. FSP 2.2 introduces Multiphase SI init
support through the FSP-S arch UPD. The FSP-S arch UPD structure
is added in edk2 stable 2020 branch. Switching the support for
JSL to edk2-stable202005 to intercept the FSP2.2 related support.
BUG=b:162184827
BRANCH=None
TEST=Build and boot JSLRVP
Cq-Depend: chrome-internal:3221772
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Change-Id: Ieed1b58e491d5a89043c418f0f44f2ee9af111f5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44576
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In the presence of self-relocating payloads, it's safer to keep
physical addresses in `libsysinfo`. This updates the remaining
pointers that are not consumed by libpayload code, all of them
strings.
Also update the comment that `libsysinfo` only containts physical
addresses.
Change-Id: I9d095c826b00d621201c34b329fb9b5beb1ec794
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
In the presence of self-relocating payloads, it's safer to keep
physical addresses in `libsysinfo`. This updates all the references
to CBMEM entries that are not consumed inside libpayload code.
Change-Id: I3be64c8be8b46d00b457eafd7f80a8ed8e604030
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43580
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
In the presence of self-relocating payloads, it's safer to keep
physical addresses in `libsysinfo`. This updates all the references
to coreboot-table entries that are not consumed inside libpayload
code.
Change-Id: I95cb0af151e0707a1656deacddb8a5253ea38fc3
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43579
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Our AArch64 code supports dynamic framebuffer allocation which
makes it necessary to change the framebuffer information during
runtime. Having a pointer inside `libsysinfo` made a mess of it
as the pointer would either refer to the original struct inside
the coreboot table or to a new struct inside payload space. The
latter would be unaffected by a relocation of the payload.
Instead of the pointer, we'll always keep a copy of the whole
struct, which can be altered on demand without affecting the
coreboot table. To align the `video/graphics` driver with the
console driver, we also replace `fbaddr` with a macro `FB` that
calls phys_to_virt().
Change-Id: I3edc09cdb502a71516c1ee71457c1f8dcd01c119
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Same as with other consoles and drivers that cache an address
outside the payload (e.g. video/corebootfb), we should store the
physical address, so we can derive the virtual address on demand.
This makes it save to use the address across relocations.
As a first step in migrating `libsysinfo` to `uintptr_t`, we
also switch to the physical address there.
Fixes the default build of FILO, tested with Qemu/i440FX and Qemu/Q35.
Change-Id: I4b8434af69e0526f78523ae61981a15abb1295b0
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37478
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Add downgrade support for CSE RW firmware.
When CSE FW is downgraded, CSE may get into data compatibility issues.
To avoid such issues, coreboot sends DATA CLEAR HECI command to CSE to
clear CSE run time data on proactive basis during a downgrade and
when CSE indicates a data mismatch error through GET_BOOT_PARTITION_INFO.
BUG=b:144894771
TEST=Verified on hatch
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I0a3a3036e448e5a743398f6b27e8e62965dbff3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40561
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The code can only be compiled as x86_32. Mark it as such to fix errors
in the x86_64 assembler. The caller has to make sure to call this code
in protected mode only.
Tested on HP Z220:
* Still boots on x86_32.
Change-Id: I4c0221fb3886b586c22fe05e36109fcdc20b7eed
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The zork devices use the ACP (audio co-processor) and the I2S interface
for audio and not the HDA (HD audio) device and interface.
BUG=b:158535201,b:162302028
BRANCH=zork
TEST=Equivalent change on Mandolin disabled the non-GPU HDA device with
the corresponding FSP change applied.
Change-Id: I6c7de881cff8398fe416151fab219142d4fc904a
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44681
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
FSP has recently added support for a UPD switch to disable the non-GPU
HD Audio controller. This change adds the coreboot side of the feature.
To avoid having two HD Audio enable options, the value of the
hd_audio_enable UPD is determined by the enable state of the non-GPU HD
Audio controller in the platform devicetree.
BUG=b:158535201,b:162302028
BRANCH=zork
TEST=With the corresponding FSP change applied the non-GPU HD Audio
device is hidden when switched off in devicetree and remains present and
functional when switched on in devicetree.
Change-Id: Ib2965e0742f4148e42a44ddad8ee05f0c4c7237e
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44680
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit 65605276a4.
This patch shouldn't have been merged yet, since the issues on the FSP
side aren't sorted out yet, so the FSP-side changes haven't landed yet.
This byte will be used for an audio-related setting instead to have the
audio settings grouped together.
BRANCH=zork
Change-Id: If79900f3a92fd949d7653001e1ca2faac7061e3c
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44678
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since Puff uses CSE Lite SKU that supports in-field CSME
updates an additional reset is triggered when jmp from RO
to RW during boot. However this reset is not detected by
the cr50 running older firmware because the strapping
configuration for EFS2 uses PLT_RST_L to assert to cr50
that a AP reset occured. The older cr50 firmware
version of 0.0.22 only monitors AP resets via SYS_RESET_L
and hence never detects the reset.
To mitigate the issue above a modified reset sequence is
required to be performed to signal the reset occured and
hence a board-specific cse_board_reset() strong symbol is
provided to modify the flow accordingly.
V.2: Select CHROMEOS_CSE_BOARD_RESET_OVERRIDE common
implementation instead of a local variant in mainboard.c
BUG=b:162290856
BRANCH=puff
TEST=none
Change-Id: I27ab9711aedf92b5af7a58f3b5472ce79f78c8fa
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44454
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This will ensure that the cold reset is performed when CSE Lite jumps
from RO to RW.
BUG=b:162386991
TEST=Ensure that Drawcia board boots to OS. Ensure that global reset is
triggered when cr50 is running firmware versions newer than 0.0.22. On
cr50 versions 0.0.22 or older, EC triggers cold reset of AP.
Change-Id: I46a390c71e380328cd7fe70214df09553b2db75c
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44645
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
When CSE Lite jumps from RO to RW, certain boards need to request
Embedded Controller (EC) to trigger cold reset of SoC. This change
introduces a helper to override the default global reset.
BUG=None
TEST=Ensure that Drawcia board boots to OS. Ensure that global reset is
triggered when cr50 is running firmware versions newer than 0.0.22. On
cr50 versions 0.0.22 or older, EC triggers cold reset of AP.
Change-Id: I8078e2436d1d58a650bf7b0cf38b5bb89a474187
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44646
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Introduce a helper to get the cached cr50 firmware version. This
information is in turn used to identify the strap configuration
supported by Cr50.
BUG=None
TEST=Ensure that Drawcia board boots to OS. Ensure that the version
cached cr50 firmware version is returned.
Change-Id: Id84b152993f253878a6c133cc433a0da2c990cf2
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44653
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Make GPIO_4 and GPIO_5 PAD_NC in ezkinil/gpio.c. None of the Ezkinil SKUs
use internal stylus and hence pen pads are configured as NC.
BUG=b:164892883, b:165342107
TEST=Verified taht pen detect GPIO does not cause spurious wakes.
BRANCH=None
Signed-off-by: Josie Nordrum <josienordrum@google.com>
Change-Id: I7557575cf8b8e0f849e05bda1d69acf61e91a157
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44629
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
According to the IT8728F datasheet it is possible to add an extra delay
between 3VSBSW# being set and PWRGD3 being set during resume from
Suspend-to-RAM. This is enabled in the special function selection
register, the default being 0.
This is also useful for the IT8720F although this chip does not have the
PWRGD3 output. On the corresponding pin it has PWROK2, which the setting
then seems to apply to.
The datasheet for the IT8720F marks the corresponding bit as reserved,
but the vendor BIOS of an Acer Aspire M3800 sets it anyway. Without
setting the bit, coreboot fails to resume from S3. Oscilloscope
measurements have shown that setting the bit increases the delay between
3VSBSW# being set and PWROK2 being set from around 1 us to 140 ms. The
actual use of PWROK2 on the board design is unclear - the only
destination it seems to reach is a pin header near the SuperIO marked as
"GPIO1".
Signed-off-by: Michael Büchler <michael.buechler@posteo.net>
Change-Id: I51cbf2470dc2b840a647a20090acb5a0cf4f4025
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The assumption was that the fmap cache would be initialized in
bootblock, otherwise an error is shown. This error is showing
up in psp_verstage when the fmap cache is initialized there, so
create a new ENV value for ENV_INITIAL_STAGE.
BUG=None
TEST=Boot, see that error message is gone from psp_verstage
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I142f2092ade7b4327780d423d121728bfbdab247
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43488
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When booting from the RO region of a VBOOT enabled ROM, there shouldn't
be a reliance on anything outside of the RO section. This includes the
APOB_NV region (similar to the MRC cache region). By skipping the
region when setting up the BIOS Directory table, the PSP won't try to
use the region when booting.
The APOB_NV region is still used for the VBOOT RW sections.
BUG=b:158363448
TEST=Build RO with no APOB_NV region. Dump the BDT and verify that
it's not in RO, but is in RW_A & RW_B. Boot into recovery.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I13c35ba8a2331492744d2acf257db15e4a53102a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44046
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
amdfwtool currently assumes that we MUST have an apob_nv area if we
have an aopb. This is not required, so if neither the apob_nv size or
base are specified, just move on.
BUG=b:158363448
TEST=Build an image with no APOB_NV region. Dump regions to show that
it's not there.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: Ibaeacd3dcdfd73f690df61c2a19d39bbb9dcc838
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44045
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Linux kenerl driver for AMD gpu currently has a floor
value of 12 for brightness settings (AMDGPU_DM_DEFAULT_MIN_BACKLIGHT).
AMD indicates they did this because they were concerned with certain
panels flickering at lower backlight values. However, for unaffected
panels it's desirable to be able to have the panel "turn off" at
the lowest backlight setting. The only way to do that is to provide
ATIF bindings that indicate backlight range.
Option SOC_AMD_COMMON_BLOCK_GRAPHICS_ATIF is added to provide a full
range for the backlight setting. If needed, this path can be built upon
for fuller support, but for the time being this is the only thing
necessary to make the backlight be full range.
BUG=b:163583825
Change-Id: If76801a8daf6a5e56ba7d118956f3ebce74e567a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The GDT loading did work fine on x86_64 a few months ago, but today it
only works in QEMU, but not on real hardware or KVM-enabled QEMU. This
might be related to toolchain changes.
Use 64bit GDT loading on x86_64 and force the assembler to generate a
64bit address load on the GDT. This will make sure no 32bit (signed)
displacement op is being generated, which points to the wrong address
in longmode.
Verified using readelf and made sure no R_X86_64_32S relocation symbol
is emitted. Disassembled the romstage ELF and made sure the GDT address
is 64bit in size.
Tested on QEMU and KVM-enabled QEMU: Doesn't crash any more on KVM.
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Change-Id: Ia824f90d9611e6e8db09bd62a05e6f990581f09a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43136
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
IPU is required to be enabled for platform supporting MIPI camera.
IPU is by default disabled in devicetree for all variants. Enable
IPU for Waddledoo and Waddledee supporting MIPI camera.
BUG=None
BRANCH=None
TEST=IPU is enabled for platforms and enumerates in lspci.
Change-Id: Ia3cf06d78be4301c68bfa8b1118ddff231d24a66
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44271
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
A new Kconfig setting CR50_USE_LONG_INTERRUPT_PULSES controls new code
running in verstage, which will program a new Cr50 register, to
have Cr50 generate longer than default interrupt pulses.
This needs to be selected on all Tiger Lake systems, since Tiger Lake
(and likely future Intel SoCs) require at least 100us interrupt pulses.
TEST=util/abuild/abuild -t GOOGLE_VOLTEER -c max -x
BUG=b:154333137
Change-Id: I20100d72ce426203943c1788d538bb2cd9d82e11
Signed-off-by: Jes Bodi Klinke <jbk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44626
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Compiler's instrumentation cannot insert asan memory checks in
case of memory functions like memset, memcpy and memmove as they
are written in assembly.
So, we need to manually check the memory state before performing
each of these operations to ensure that ASan is triggered in case
of bad access.
Change-Id: I2030437636c77aea7cccda8efe050df4b77c15c7
Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44307
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Instead of enabling ASAN_IN_ROMSTAGE from Kconfig file in a
platform's dedicated directory, let's introduce a new config
option HAVE_ASAN_IN_ROMSTAGE to denote if a given platform
supports ASan in romstage.
Similary, use HAVE_ASAN_IN_RAMSTAGE to indicate
if a given platform supports ASan in ramstage. Consequently, we
no longer have to make ASan x86 specific.
Change-Id: I36b144305465052718f245cacf61d3ca44dfb4b4
Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44258
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
This patch adds ASan support to romstage on x86 architecture.
A Kconfig option is added to enable ASan in romstage. Compiler
flags are updated. A memory space representing the shadow region
is reserved in linker section. And a function call to asan_init()
is added to initialize shadow region when romstage loads.
Change-Id: I67ebfb5e8d602e865b1f5c874860861ae4e54381
Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43604
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
This patch adds address sanitizer module to the library and reserves
a linker section representing the shadow region for ramstage. Also,
it adds an instruction to initialize shadow region on x86
architecture when ramstage is loaded.
Change-Id: Ica06bd2be78fcfc79fa888721ed920d4e8248f3b
Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
An additional compiler flag is added to make use of the shadow
offset callback feature we introduced in our GCC patch. Also,
a comment is added to tell user that this GCC patch needs to be
applied in order to use ASan.
Change-Id: Ia187e4991bf808f4ae137eff0ffdb9baea0085e9
Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43164
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
With CSE-lite enabled, we were going through the lengthy memory
training procedure twice on the first power-on boot or after full BIOS
SPI flash update. This moves the global reset performed to achieve the
CSE-lite RO to RW reboot to a later boot phase so that it happens
after the memory training data has been written to the MRC cache. Now,
the 2nd (and subsequent) reboot can utilize the memory training data
established during the 1st boot.
This reduces the first boot time by about 20s on a 16GB system.
Looking at the timing stats form cbmem, the normal boot penalty is
about 300ms - mostly attributed to running FspSiliconInit a 2nd
time. We will get this time back when the mrc_cache refactoring effort
lands (cb:44196, et. al).
BUG=b:162021048
TEST=Booted on volteer, confirmed 20s faster boot time.
Change-Id: Ia42d72fdec41f9792ab8f04205b20a55758a4235
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44430
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Add code for IVRS generation to coreboot. Publish coreboot generated
structure rather than IVRS generated by FSP binary.
Reference Doc: 48882_IOMMU_3.05_PUB.pdf
BUG=b:155307433
TEST=Boot trembyle to shell and extract and compare IVRS tables and make
sure they cover the same devices.
Change-Id: I693f4399766c71c3ad53539634c65ba59afd0fe1
Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
For Volteer (and future Tiger Lake boards) we can enable mode S0i3.4
only if we know that the Cr50 is generating 100us interrupt pulses.
We have to do so, because the SoC is not guaranteed to detect pulses
shorter than 100us in S0i3.4 substate.
A new Kconfig setting CR50_USE_LONG_INTERRUPT_PULSES controls new code
running in verstage, which will program a new Cr50 register, provided that
Cr50 firmware is new enough to support the register.
BUG=b:154333137
TEST=util/abuild/abuild -t GOOGLE_VOLTEER -c max -x
Signed-off-by: Jes Bodi Klinke <jbk@chromium.org>
Change-Id: If83188fd09fe69c2cda4ce1a8bf5b2efe1ca86da
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43741
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Kconfig 5.8 interprets $(...) itself using environment variables, which
generally means that they expand to the empty string. \$(...) works
with both our current and new Kconfig with the desired behavior
(to pass it through unmodified).
Change-Id: I726567eeb61d2035560152677d2b4548c1472be9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44584
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Not selecting `ME_MBP_CLEAR_LATE` results in a build failure. Since both
traditional and ULT platforms are known to be working, drop the option.
Change-Id: I09ce27f812966800e36f6c0624c93759089faf45
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Together with the "AMD_XMP" changes, now this board with Crucial
BLT8G3D1869DT1TX0 sticks could run at 1600 MT/s CL8 (8-8-9-23) speeds.
Earlier only 1333 MT/s CL9 (9-9-10-27) has been possible with coreboot.
1866 MT/s CL9 is impossible on f16kb without northbridge overclocking.
tRP in "CL-tRCD-tRP-tRAS" gets set 1 point higher by AGESA because of
Errata 638. See more info in a BKDG for AMD Family 16h Models 00h-0Fh.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: I7e9f5120421221043f9f9dfe143b51bfa61936be
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44462
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
AMD f16kb boards are perfectly capable of working at 1600MT/s RAM speeds
even with two DDR3 UDIMM modules per channel. AM1I-A only supports a
single-channel operation, with at most two DIMMs per channel, so raising
these limit values is required to let it and similar boards run faster.
Successfully tested on AM1I-A and two Crucial BLT8G3D1869DT1TX0 UDIMMs,
together with related AMD_XMP changes - also required to get a 1600MT/s
with this set of modules which have only 1333MT/s at JEDEC part of SPD.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: I2a9da4e594ab3dc38b5ba87520633cbd01c9ce01
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44461
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since Volteer also uses the CSE Lite SKU and the cr50, it is subject
to a problem where old cr50 FW will not be able to properly detect an
SoC reset, so the reset on cold boots caused by the CSE Lite RO->RW
jump should instead get an assist from the EC, which can perform a
full cold reset.
BUG=b:162977697
TEST=Verify EC performs the cold reset
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ie8ae21c203da218459d5fd30a23be23520ed0598
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44536
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
* Enable optional x86_64 romstage, postcar and ramstage
* Add Kconfig for x86_64 compilation
* Add documentation for x86 qemu mainboards
* Increase CAR stack as x86_64 uses more than 0x4000 bytes
Working:
* Boots to Linux
* Boots to SeaBIOS
* Drops to protected mode at end of ramstage
* Enumerates PCI devices
* Relocateable ramstage
* SMM
Change-Id: If2f02a95b2f91ab51043d4e81054354f4a6eb5d5
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29667
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* On ARCH_RAMSTAGE_X86_64 jump to the payload in protected mode.
* Add a helper function to jump to arbitrary code in protected mode,
similar to the real mode call handler.
* Doesn't affect existing x86_32 code.
* Add a macro to cast pointer to uint32_t that dies if it would overflow
on conversion
Tested on QEMU Q35 using SeaBIOS as payload.
Tested on Lenovo T410 with additional x86_64 patches.
Change-Id: I6552ac30f1b6205e08e16d251328e01ce3fbfd14
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The AM335X is a SoC, so should be in the soc tree.
This moves all the existing am335x code to soc/ and updates any
references. It also adds a soc.c file as required for the ramstage.
Change-Id: Ic1ccb0e9b9c24a8b211b723b5f4cc26cdd0eaaab
Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44378
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Implements fit_payload_arch for the arm (aarch32) architecture, so that
FIT images can be used. The implementation is very similar to the
existing implementations for arm64 and riscv, and has mostly been
lifted from these other ports.
TEST: Booted Beaglebone Black (in progress port, to be submitted soon!)
with a FIT image containing a 5.4 kernel, dtb and initramfs.
Change-Id: I6b50c6f06b83c00a5b3622b5bbafe67130b6d233
Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
In order to log gpio events for wake purposes the state
of the gpio subsystem should be snapshotted. Add the ability
to capture state of gpio subystem as well as saving up to 16
gpios that indicate their wake status.
Likewise, provide the eventlog additions based on state.
BUG=b:159947207
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I49fca56c87543aa8aad0eb7da5c5cb570c4349d5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44534
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Switch from locating the AMD firmware in the RW_A &
RW_B regions with their hardcoded locations to using CBFS to find
them. They still need to be at the hardcoded locations so that we
can set the location inside the binary, but instead of just setting
the pointer directly to them, we now search for them with cbfs.
BUG=b:154441227
TEST=Boot & verify that binaries are located in both RW-A & RW-B
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I27b0593e0db7a9e6ba9b0633ac93b4d93954f002
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42831
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In CB:44488 the cbmem addition was re-filling the object
when it should be memcpy()ing from static object. Correct
that oversight. The side effect from the previous implementation
would be if FSP-M modified the GPE state.
BUG=b:159947207
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I158a89ae28431896fa9b5789292000fcbf0b066d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44533
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GPP_A19(DP_HPD1) and GPP_A20(DP_HPD2) were configured native function
(NF1) without internal pull-down which wrongly presents HPD interrupts.
DP_HPD had been removed for EVT design as those events are through eSPI.
This change configures GPP_A19 and GPP_A20 to be no connection and
disables DdiPort1Hpd and DdiPort2Hpd.
BUG=b:162566436
TEST=Booted to kernel and verified no kernel HPD pins assertion message
on Volteer EVT board.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Ia3245741b776b75073d2b43d36c8ea40b476b3ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44501
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The wake source macro for GPE events was using 'GPIO'. However,
current usage is really all GPEs. Therefore, provide clarity
in the naming in order to allow for proper GPIO wake events
that are separate from the ACPI GPE block.
BUG=b:159947207
Change-Id: I27d0ab439c58b1658ed39158eddb1213c24d328f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Similar to commit b45ed65, the HOB structure is actually a 8 byte
address pointing to the HOB data.
Tested=Verified the values of the hob fields are the same printed by
soc_display_memmap_hob().
Change-Id: I348d3cd80a56e86d22f20fcadf0316b462b86829
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Enable long mode in SMM handler.
x86_32 isn't affected by this change.
* Enter long mode
* Add 64bit entry to GDT
* Use x86_64 SysV ABI calling conventions for C code entry
* Change smm_module_params' cpu to size_t as 'push' is native integer
* Drop to protected mode after c handler
NOTE: This commit does NOT introduce a new security model. It uses the
same page tables as the remaining firmware does.
This can be a security risk if someone is able to manipulate the
page tables stored in ROM at runtime. USE FOR TESTING ONLY!
Tested on Lenovo T410 with additional x86_64 patches.
Change-Id: I26300492e4be62ddd5d80525022c758a019d63a1
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37392
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Eugene Myers <cedarhouse1@comcast.net>
Add support for Cannonlake-LP SoCs (Whiskeylake-U,
Coffeelake-U, Cometlake-U) as a separate parsing profile,
copying the existing 'Sunrise' profile and adjusting for differences
in reset mapping and GPIO macro generation
Test: convert inteltool GPIO log dump into coreboot macros for
an out-of-tree CML-U board.
Change-Id: I86296697ee892af7aa0818fb608b6d68fad2f307
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
FSP enables IPU (Imaging Processing Unit) by default even if its
disabled in devicetree. We need to fill FSP upd based on the device
enablement in devicetree.
BUG=None
BRANCH=None
TEST=IPU is disabled and doesn't show in lspci.
Change-Id: I0f9a40e85427fd88bb12a40770ecf7b939b1d8cd
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Emit ACPI code for LPSS UARTs operating in ACPI mode. In this mode the
device vendor ID reads as 0xffff, the PCI devices is still operate.
Add ACPI device IDs for APL, GLK, SPT, SPT_H and CNP_H.
The mainboard's devicetree needs to be adapted to include the chip
driver and the PCI ID when it wouldn't have been hidden.
Example:
chip soc/intel/common/block/uart
device pci 19.2 hidden
register "devid" = "PCI_DEVICE_ID_INTEL_CNP_H_UART2"
end # UART #2
end
Tested on Linux 5.6 with Sunrise Point ACPI ID for UART2.
Tested on Windows for all other UARTs.
Change-Id: I838d16322be38f5421c1f63b457a0af552e0ed96
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40405
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Previously the chipset state was snapshotted very late in the boot
(ramstage). Instead start gathering the state early in romstage
prior to calling any FSP routines so there's a clean snapshot.
BUG=b:159947207
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Id41686e6cdf5bebc9633b514b4121b0447f9be2d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44488
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Transition the current call sequence to using the newly added common
ACPI helper functions. Semantically, the expectations are that this
sequence is the equivalent of previous acpi_clear_pm1_status(). However,
in subsequent patches picasso will be snapshotting state way sooner than
ramstage.
BUG=b:159947207
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I34e2ba7c5cd123b98c39291537e74175ec043e85
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44484
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Transition the current call sequence to using the newly added common
ACPI helper functions. Semantically, the expectations are that this
sequence is the equivalent of previous acpi_clear_pm1_status().
BUG=b:159947207
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Id3ae19013c68d2c97b084046f600596ecc462374
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44483
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
In order to reduce code duplication provide an acpi_fill_gnvs()
helper function. Intent is to move stoneyridge and picasso over
to using this common implementation instead of duplicating it.
BUG=b:159947207
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I21c6e2c24eaf42f31ae57c05df7f633d7dc266d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44482
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The existing code in common/block/acpi is mixing multiple operations:
saving things to cbmem in common code but then soc code uses that
information, reliant upon soc-specific struct soc_power_reg object,
and only saving/snapshotting ACPI registers very deep in ramstage.
To unwind the above provide some functions that are more targeted:
- Add struct acpi_pm_gpe_state object
- Add acpi_fill_pm_gpe_state()
- Add acpi_pm_gpe_add_events_print_events()
- Add acpi_clear_pm_gpe_status()
BUG=b:159947207
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ia7afed2861343802b3c78728784f7cfaf6f53f62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44481
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Unlike Linux kernel which has a static shadow region layout, we have
multiple stages in coreboot and thus require a different shadow offset
address. Unfortunately, GCC currently only supports adding a static
shadow offset at compile time using -fasan-shadow-offset flag.
For this reason, we enable GCC to determine asan shadow offset address
at runtime using a callback function named __asan_shadow_offset().
This supersedes the need to specify this address at compile time. GCC
then makes use of this shadow offset to protect stack buffers by
inserting red zones around them.
Some other benefits of having this GCC patch are:
a. We can place the shadow region in a separate linker section with
all its advantages like automatic fit insurance. This ensures if
a platform doesn't have enough memory space to hold shadow region,
the build will fail. (However, if we use a fixed shadow offset on a
platform that actually doesn't have enough memory, it may still
build without any errors.)
b. We don't modify the memory layout compared to the current one, as
we are placing the shadow region at the end of the space already
occupied by the program.
c. We can be much more flexible later if needed (thinking of other
stages like bootblock).
d. Since we are appending the shadow buffer to the region already
occupied, we make efficient use of the limited memory available
which is highly beneficial when using cache as ram.
Further, we have made sure that if you compile you tree with ASan
enabled but missed this patch, it will end up in the following
compilation error:
"invalid --param name 'asan-use-shadow-offset-callback'"
So, you cannot accidentally enable the feature without having your
compiler patched.
Change-Id: I401631938532a406a6d41e77c6c9716b6b2bf48d
Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42794
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Naming a device allows an ACPI _ROM method to be written for it. GPUs
may require this to make the configuration data contained within
available to an OS driver. This may be required for GPUs that do not
contain their vBIOS, or perhaps the drivers require it in this form/fashion.
Working on an Acer Aspire VN7-572G (Skylake-U). nouveau successfully
obtains the vBIOS via ACPI (kernel 5.7.11).
Change-Id: Ida87aebf8fdf341ab350c2bb3704d2ef695cf8f0
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
With new board designs being introduced it does not make sense for the default
devicetree setting to be retimer disabled on port 0 for Aux Orientation.
Change the default to be Aux Orintation retimer controlled on all ports and
move the SOC controlled overrides to the corresponding overridetree files.
BUG=NONE
BRANCH=NONE
TEST=Built image for delbin and verified that port 0 flip is working.
Change-Id: I5ff59493472db096c027d223f2fd61545dc935e2
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44358
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
current setting got 0.278us which is less than the min 0.3us.
increase i2c2 data hold time for TP.
BUG=b:163613330
BRANCH=master
TEST=1. emerge-zork coreboot chromeos-bootimage
2. data hold time measured by scope: 0.3805us
Change-Id: I2d564983383c17ed43cc5cc5aaff0fcd67ce6928
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44405
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This applies to the goodix touch screen on both the volteer and
volteer2 variants: Define GPP_E3 as the stop_gpio for the touch screen
"Report_Switch" signal. Goodix defines a 1ms (minimum) delay after
stop off. In addition, no longer drive this GPIO high by default as it
is now controlled by the kernel through ACPI.
BUG=b:153705232
TEST=touch screen still functional on volteer; confirmed timings with
scope (VDD, RESET, REPORT_SWITCH)
Change-Id: I3ead9cf79812d08c4917be4585ed273050465a9b
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44356
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
More space is required in the COREBOOT CBFS to accommodate some features.
Currently no alternate firmware is stuffed into RW_LEGACY CBFS and has
~1 MB of unused space. Borrow some space from RW_LEGACY CBFS and extend
the RO_SECTION. Even within RO_SECTION, GBB requires only 12 KiB. So
adjust the GBB region accordingly and extend the COREBOOT CBFS.
BUG=b:162159386
TEST=Build the JSLRVP mainboard.
Change-Id: Ia8bb381c31ddf76f3211f9d4ac5c8c18c27834b7
Signed-off-by: Karthikeyan Ramasubramanain <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44283
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
All the Sandy/Ivy Bridge EliteBook and ProBook laptops currently
supported by coreboot and on review all support TPM 1.2 according the
maintenance and service guide manuals of these laptops. So select the
Kconfig options of TPM and TPM 1.2 and add the entry of it to the
common device tree.
The device tree C source files of 8460p generated by sconfig before
and after this change are compared. All the device nodes still exist
with nodes under LPC having different device number.
Tested with 2560p, which still works without problems, and the TPM can
be detected and used in the system.
Change-Id: Ic6158d3346a55e3d09c0a4ced9fd141b9a6c4256
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41169
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
libpayload's drivers keep growing. With certain hardware/payload
combinations (last time witnessed with Kontron/bSL6 and FILO), the
default configuration runs out of memory.
As there is a lot enabled by default, also set a big default heap size.
Tested with FILO on QEMU/Q35.
Change-Id: I51a1514097aeb8b3c835a2387db66869b81d0bcc
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44176
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
This patch updates the SLP_Sx assertion widths and power cycle duration
for the Japerlake RVP.
Power cycle duration:
With default value,
S0->S5 -> [ ~4.2 seconds delay ] -> S5->S0
With value set to 1,
S0->S5 -> [ ~1.2 seconds delay ] -> S5->S0
BUG=b:159104150
TEST=Verified that the power cycle duration is ~1.2s with global
reset on JSLRVP.
Change-Id: Ie2a8d959d7ebbf9c24f8c4e8d5c68b70e0ac5708
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43793
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
This patch updates the SLP_Sx assertion width and power cycle duration
for the dedede platforms.
Power cycle duration:
With default value,
S0->S5 -> [ ~4.2 seconds delay ] -> S5->S0
With value set to 1,
S0->S5 -> [ ~1.2 seconds delay ] -> S5->S0
BUG=b:159104150
TEST=Verified that the power cycle duration is ~1.2s with global
reset on waddledoo.
Change-Id: I7079cbd564288b5d5b69e07661434439365063d3
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43792
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Two of the items in the FADT ACPI table frequently are partially board-
specific, so let's make it easy to update them via devicetree settings.
- fadt_boot_arch 0="legacy free" which while reasonable, probably isn't
what will be wanted by most mainboards, so this should generally get
updated in the specific devicetree.
- In fadt_flags all chipset-specific flags get set while the mainboard
has to set all other flags that it needs to have set.
This patch changes the default for fadt_boot_arch.
Change-Id: I6e8d0c60cadfdd24b6926703b252abbc56d436de
Signed-off-by: Martin Roth <martinroth@chromium.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43418
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The DISPLAY_3D class is for graphics devices that are not connected to
displays. This includes GPUs implementing muxless Nvidia Optimus.
According to CB:31502, some AMD GPUs are identified as DISPLAY_OTHER.
Therefore, consider the entire DISPLAY class as GPUs.
Change-Id: I0f203a013c010337ae7a9fddbd13330f380050a4
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43070
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Xeon-SP Skylake Scalable Processor can have 36 CPU threads (18 cores).
Current coreboot SMM is unable to handle more than ~32 CPU threads.
This patch introduces a version 2 of the SMM module loader which
addresses this problem. Having two versions of the SMM module loader
prevents any issues to current projects. Future Xeon-SP products will
be using this version of the SMM loader. Subsequent patches will
enable board specific functionality for Xeon-SP.
The reason for moving to version 2 is the state save area begins to
encroach upon the SMI handling code when more than 32 CPU threads are
in the system. This can cause system hangs, reboots, etc. The second
change is related to staggered entry points with simple near jumps. In
the current loader, near jumps will not work because the CPU is jumping
within the same code segment. In version 2, "far" address jumps are
necessary therefore protected mode must be enabled first. The SMM
layout and how the CPUs are staggered are documented in the code.
By making the modifications above, this allows the smm module loader to
expand easily as more CPU threads are added.
TEST=build for Tiogapass platform under OCP mainboard. Enable the
following in Kconfig.
select CPU_INTEL_COMMON_SMM
select SOC_INTEL_COMMON_BLOCK_SMM
select SMM_TSEG
select HAVE_SMI_HANDLER
select ACPI_INTEL_HARDWARE_SLEEP_VALUES
Debug console will show all 36 cores relocated. Further tested by
generating SMI's to port 0xb2 using XDP/ITP HW debugger and ensured all
cores entering and exiting SMM properly. In addition, booted to Linux
5.4 kernel and observed no issues during mp init.
Change-Id: I00a23a5f2a46110536c344254868390dbb71854c
Signed-off-by: Rocky Phagura <rphagura@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43684
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Simplify some if-blocks which are used for the configuration, enablement
and disablement of the PEG devices.
This changes the logic of the code, since it configures PegxEnable
before the if-blocks, where x is the number of the PEG device, and the
further configuration of the PEG devices depends on the enablement of
PegxEnable.
Change-Id: I6dd88ce752ce8f0255c424d0e5b2d8ef918885a1
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44368
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner
Move InternalGfx config option out of the if-else-block and replace the
left over config option IgdDvmt50PreAlloc by a ternary expression. Also,
adjust related code comments to fit the new logic of this code.
This changes the logic of the code, since InternalGfx is configured
first and IgdDvmt50PreAlloc depends on its value. The negation in the
ternary expression is removed to improve the readability.
Change-Id: I89ff17f4574a7ade228c1791f17ea072fb731775
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44369
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
* Add support for loading GDT on x86_64.
* Add x86_64 assembly code to do the same as the x86_32 code.
* Separate x86_32 and x86_64 code.
Tested on qemu x86_32 and x86_64 using additional MTRRs.
Tested on Lenovo T410 with additional x86_64 patches.
Change-Id: I1c190627f5f0ed6f82738cb99423892382899d7b
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30500
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
TBT ports should be disabled if the DB is a USB3 DB. It is assumed if
the DB doesn't support USB4 the platform as a whole should only be USB3
capable and TBT functionality on both ports should not be enabled.
BUG=NONE
BRANCH=NONE
TEST=Built coreboot and verified that TBT was disabled on platform with
USB3 DB and enabled on platform with USB4/TBT DB
Change-Id: I594f2e9483aaf896de2b6aea9a3460bd3826c58c
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
When CSE Lite jumps from RO to RW, global reset is initiated. When AP is
reset as part of global reset, TPM initialization fails. This is because
AP reset is not detected by TPM hosting an older firmware version. Request
Embedded Controller (EC) to perform AP reset so that TPM can detect that
event.
BUG=b:162290856, b:162386991
TEST=Ensure that the device boots to OS with the board-specific reset
sequence when CSE Lite jumps from RO to RW with an older and newer Cr50
firmware.
Cq-Depend: chromium:2337430
Change-Id: Ib1f7271130e0b4b68c7f0917ecc4eadba1486206
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
When CSE Lite jumps from RO to RW, global reset is initiated. When AP is
reset as part of global reset, in some boards TPM initialization fails.
This is because AP reset is not detected by TPM hosting an older firmware
version. To signal TPMs running older firmware version about AP reset, a
modified reset sequence needs to be performed. Hence add support to
perform board-specific reset sequence.
BUG=b:162290856, b:162386991
TEST=Ensure that the device boots to OS with the board-specific reset
sequence when CSE Lite jumps from RO to RW with an older and newer Cr50
firmware.
Change-Id: I8663e7f25461e58e45766e2ac00d752bfa191d8b
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44187
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently sku_id is used to enable/disable eMMC as boot media on
Dalboz. This patch will check eMMC bit in firmware configuration
table to enable/disable eMMC.
On Dalboz Proto and EVT devices with eMMC, there was an issue found
after SMT. This patch checks for board_version instead of SKU_ID to
configure eMMC in HS200.
Configure HDMI based on daughterboard_id in FW_CONFIG.
BRANCH=none
BUG=b:152817444
TEST=Check eMMC is enabled or disabled based on the eMMC bit in
FW_CONFIG.
Signed-off-by: Bhanu Prakash Maiya <bhanumaiya@google.com>
Change-Id: Ifa2a49a754d85fb6269f788c970bd9da58af1dad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44421
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Currently SKU_ID is used to enable/disable eMMC as boot media on
Ezkinil. This patch will check eMMC bit in firmware configuration
table to enable/disable eMMC.
BRANCH=none
BUG=b:162344105
TEST=Check eMMC is enabled or disabled based on the eMMC bit in
FW_CONFIG.
Signed-off-by: Bhanu Prakash Maiya <bhanumaiya@google.com>
Change-Id: I62318cf71ec70790f2d9e787febd1e0b787741fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44423
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
After confirming that all zork variants and phases have valid
FW_CONFIG value in CBI, this patch is dropping FW_CONFIG validity checks
like VARIANT_HAS_FW_CONFIG and VARIANT_BOARD_VER_FW_CONFIG_VALID in Kconfig
and will also remove associated helper functions.
BRANCH=none
BUG=b:162344105,b:152817444
TEST=Check if FW_CONFIG bits can be read in coreboot and FW_CONIFG helper
function do not return 0 if board has a valid FW_CONFIG in CBI.
Signed-off-by: Bhanu Prakash Maiya <bhanumaiya@google.com>
Change-Id: I633dc7c500ef8759f3fffb0db6b76d96257c3c9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44422
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Similar to set_blend(), add set_color_map() for mapping background and
foreground colors of a bitmap. Also add clear_color_map() for clearing
the saved color mappings.
Note that when drawing a bitmap, the color mapping will be applied
before blending.
Also remove unnecessary initialization for static variable 'blend'.
BRANCH=puff
BUG=b:146399181, b:162357639
TEST=emerge-puff libpayload
Change-Id: I640ff3e8455cd4aaa5a41d03a0183dff282648a5
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44375
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Joel Kitching <kitching@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This patch sets the GPP_H1 to PAD_CFG_GPO which is general
purpose output with no pullup/down. We need this GPIO for
the detection of soundcard in TGL RVP's.
BUG=none
BRANCH=none
TEST=Build and boot tglrvp successfully. From "aplay -l"
output check that soundcards are listed properly.
Change-Id: Ic0ef33079af7940360c986efacabd6d367aad516
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41811
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
To be consistent with the rest of the tree, replace all left ternary
expressions, which are used for device enablement / disablement,
with `dev && dev->enabled`.
Change-Id: Ie7afa48bf2c8bdad5a043f7cb6953d05b7b6597d
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
The port is based on the F2A85-M, the main differences are:
- 2 DDR3 dimms
- 2 PS/2 ports
- 2*USB2.0 and 2*USB3.0 ports
- 3+2 phase VRM
- 6 channel audio
- 6 SATA ports
- ASP1206 VRM controller
- Bolton D4 chipset
- no optical SPDIF/IO
Successfully booted configurations:
-RAM: 2*8GB Kingston KVR 1333Mhz LP, 2*8GB Crucial BLT8G3D1869DT1TX0
-CPU: AMD A8-6500 (Richland), AMD A10-6700 (Richland)
-OS: Arch Linux 4.19 (SATA, USB), Linux Mint 19.3, Artix Linux 2019
-SeaBIOS: 1.12 and 1.13
Known problems:
- IRQ routing is done incorrect way - common problem of fam15h boards
- Windows 7 can't boot because of the incomplete ACPI implementation
Change-Id: I60fa0636ba41f5f1a6a3faa2764bf2f0a968cf90
Signed-off-by: Balazs Vinarz <vinibali1@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30987
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
soc/amd/picasso selected FSP_USES_CB_STACK even though it is FSP 2.0
based, so it doesn't reuse coreboot's stack, but sets up its own stack.
In contrast to all other FSP 2.0 based platforms, this stack isn't in
the CAR region, since AMD Picasso doesn't support CAR and the DRAM is
already available when the x86 cores are released from reset. Selecting
FSP_USES_CB_STACK ended up doing the right thing, but is semantically
wrong. Instead of wrongly selecting FSP_USES_CB_STACK in soc/amd/picasso
we take the corresponding code path if ENV_CACHE_AS_RAM is false which
is only the case for non-CAR platforms.
BUG=b:155501050
TEST=Timeless build results in an identical binary for amd/mandolin,
asrock/h110m-dvs and intel/coffeelake_rvp11 which cover all 3 cases
here.
Change-Id: Icd0ff8e17a535e2c247793b64f4b0565887183d8
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
This reduces the differences between both ME source code files.
Tested with BUILD_TIMELESS=1, Asus P8Z77-V LX2 does not change.
Change-Id: I08e07ca2691bb854682692476153a98967bf05da
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44340
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
This patch updates regions-for-file function in the
security/vboot/Makefile.inc to support adding a CBFS file into
required FMAP REGIONs in a flexible manner. The file that needs to be
added to specific REGIONs, those regions list should be specified in the
regions-for-file-{CBFS_FILE_TO_BE_ADDED} variable.
For example, if a file foo.bin needs to be added in FW_MAIN_B and COREBOOT,
then below code needs to be added in a Makefile.inc.
regions-for-file-foo := FW_MAIN_B,COREBOOT
cbfs-file-y := foo
foo-file := foo.bin
foo-type := raw
TEST=Verified on hatch
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I1f5c22b3d9558ee3c5daa2781a115964f8d2d83b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
CB:44362 ("mb/google/zork: Reorganize chromeos.fmd to increase WP_RO
to 8MiB") updated the flash layout which moved RW_SECTION_A and
RW_SECTION_B to different addresses than before. PICASSO_FW_A_POSITION
and PICASSO_FW_B_POSITION configs need to be updated accordingly to
retain the same behavior as before i.e. amdfw_a/b are placed at the
start of FW_MAIN_A/B by placing them right after the CBFS header.
This change fixes the value of PICASSO_FW_A_POSITION and
PICASSO_FW_B_POSITION to maintain amdfw at the start of RW-A/B CBFS.
BUG=b:161949925
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I177fb38af6380c36397d2a72d5ec00965087d528
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44425
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Starting with v3.6 of reference schematics, headphone jack interrupt
is moved to a standard GPIO instead of using CODEC_GPI. Thus, we no
longer need I2S wake to be enabled in the ACP for boards using v3.6+
version of schematics.
This change sets `acp_i2s_wake_enable` and `acp_pme_enable` to default
0 in baseboard devicetrees and overrides to 1 in update_hp_int_odl()
if the board is still using older version of reference schematics.
BUG=b:159934887
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I44b40db95b5148fe483c7340c5bd0d58627970a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44403
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Latest EDK2 code inside
"UefiCpuPkg\Library\RegisterCpuFeaturesLib\CpuFeaturesInitialize.c"
is now looking for EFI_CPU_PHYSICAL_LOCATION structure variables hence
coreboot need to fill required information (package, core and thread
count).
TEST=Able to see package, core and thread information as part of FSP
debug log.
Change-Id: Ieccf20a116d59aaafbbec3fe0adad9a48931cb59
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Interrupt _CRS is missing under CREC scope. TGLRVP U/Y has GPP_A15
assigned to MECC_HPD2 as EC_SYNC_IRQ. Configure this GPP_A15 GPIO as
active low and level interruptible for EC sync interrupt configuration.
BUG=None
TEST=Booted to kernel and verified EC_SYNC_IRQ in the scope of CREC
current resource settings.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Idfe4d4e800866805ee8d758028ac7ddf4b259faa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44103
Reviewed-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The patch sets FSP-M UPD Heci1BarAddress to avoid disconnect between
coreboot and FSP-M. Currently coreboot uses 0xfeda2000 as a PCI BAR address
for CSE device while FSP-M uses 0xfed1a000. So, after FSP-M call, CSE's BAR
address is overridden with 0xfed1a000. This causes HECI transactions to
fail between FSP-M call and postcar.
BRANCH=puff
TEST=Verified sending HECI commands before and after FSP-M call on hatch.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I371cb658a96f5d580faff32ffab013cb6e6c492c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add DTT (Dynamic Tuning Technology) support on Jasper Lake based drawcia
system. Add information on sensors, power limits and tcc_offset for DTT
based thermal control.
BRANCH=None
BUG=b:161993459
TEST=Built for dedede system
Change-Id: If50052864fb246a6a8f7d96fa50529e5f55968c0
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44148
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
These were probably copy-pasted from some ICHx southbridge, and then
some were corrected because native PCH init uses them. Delete the
definitions which are unused and are invalid for this southbridge.
Change-Id: I0be72f76c7fcc63316ae8566891e0732456a8c55
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
These were probably copy-pasted from some ICHx southbridge. However,
datasheet shows that some of these are located elsewhere, and some
others have disappeared completely. As they aren't in use, drop them.
Change-Id: I2d09547bdbfd5f8f72ce3541347d9fec28630c79
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44328
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Michael Niewöhner
Create the lindar variant of the volteer reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.1.2).
BUG=b:161089195
BRANCH=None
TEST=util/abuild/abuild -p none -t google/volteer -x -a
make sure the build includes GOOGLE_LINDAR
Signed-off-by: Julia Tsai <julia.tsai@lcfc.corp-partner.google.com>
Change-Id: I08923cde932b7304bcb01cd747530c87949e4692
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
On CNP-H, only four I2C controllers are available, so PCI devices 19.0
and 19.1 are missing. However, PCI device 19.2 still exists as UART 2.
That function 0 is missing means UART 2 can only be used in ACPI mode.
Both devices need to be marked as hidden on the devicetree so that the
allocator takes UART 2 into account.
Change-Id: Ie77198cc0327414b9f88cf15ba4efaddb4f5cca4
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43481
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
This change reorganizes flash map layout for zork to allow WP_RO to
grow to 8MiB. This is to allow more space for the firmware UI screens
in RO. Following changes are made in the layout:
1. MRC_CACHE_HOLE is dropped since only one slot of 64K is used for
MRC cache. Next section can start on 64K boundary immediately after
MRC cache.
2. RW_SECTION_A and RW_SECTION_B are dropped down in size to 3MiB
each. Each region is currently at ~2MiB of usage.
3. RW_ELOG is restrictred to 4KiB as that is the maximum elog size
supported by coreboot.
4. SMMSTORE is restricted to 4K.
5. RW_LEGACY region is dropped down to ~1.9MiB.
BUG=b:161949925
TEST=Verified that write-protection for RO still works fine, device
boots in recovery and non-recovery mode. Also, verified that the dump
of fmap looks correct:
dump_fmap -h firmware/image-trembyle.serial.bin
name start end size
WP_RO 00800000 01000000 00800000
RO_SECTION 00804000 01000000 007fc000
COREBOOT 00875000 01000000 0078b000
GBB 00805000 00875000 00070000
RO_FRID 00804800 00804840 00000040
FMAP 00804000 00804800 00000800
RO_VPD 00800000 00804000 00004000
RW_LEGACY 0061d000 00800000 001e3000
SMMSTORE 0061c000 0061d000 00001000
RW_NVRAM 00617000 0061c000 00005000
RW_VPD 00615000 00617000 00002000
RW_SHARED 00611000 00615000 00004000
VBLOCK_DEV 00613000 00615000 00002000
SHARED_DATA 00611000 00613000 00002000
RW_ELOG 00610000 00611000 00001000
RW_SECTION_B 00310000 00610000 00300000
RW_FWID_B 0060ff00 00610000 00000100
FW_MAIN_B 00312000 0060ff00 002fdf00
VBLOCK_B 00310000 00312000 00002000
RW_SECTION_A 00010000 00310000 00300000
RW_FWID_A 0030ff00 00310000 00000100
FW_MAIN_A 00012000 0030ff00 002fdf00
VBLOCK_A 00010000 00012000 00002000
RW_MRC_CACHE 00000000 00010000 00010000
SI_BIOS 00000000 01000000 01000000
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I882f3d813c08ba5fb0ad071da4f79e723296f4b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44362
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Joel Kitching <kitching@google.com>
In order to help identifying right DRAM info (especially in user space),
we want to unify the mapping table and do the device-specific mapping by
a virtual offset based on build config.
BUG=b:161768221,b:159301679
BRANCH=kukui
TEST=emerge-jacuzzi coreboot
Change-Id: If89bf18c48d263deb79df3e7a60c33bec000d8a3
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43987
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
It's only an error if bits other than ESPI_STATUS_DNCMD_COMPLETE are set
in the status register. If ESPI_STATUS_DNCMD_COMPLETE isn't set, the
command failed, so we expect that one to be set.
Change-Id: I6f1fb5a59b1ecadd6724a07212626f21fb90e7e7
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
When address and data register for the SIO control register access is
passed as one I/O region with a size of 2, the corresponding special
decode enable register should be used instead of a generic one to save
the rather limited generic ones for other decode ranges.
Change-Id: Ie54ff6afa2bd2156f7b3a3cf83091f1f932b6993
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44351
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The USB OC pin mapping is similar enough to move it to the base board
and just have two overrides for trembyle, which is based on an older
version of the schematics, and one override for woomax, which doesn't
use one USB port.
BUG=b:163081097
Change-Id: I7e305d7e6f51d7ef7a4c699e3bacc6bcd699d2f2
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
* Add ECC test code when DEBUG_RAM_SETUP is enabled
* Move ECC scrubbing after set_scrambling_seed() to be able to observe
what has been cleared in the test routine. If clearing happens
before set_scrambling_seed the data is XORed with a different PRN.
Data read from memory will look random instead of all zeros.
* ECC scrubbing must happen after dram_dimm_set_mapping()
The ECC logic is set to "normal mode" in dram_dimm_set_mapping(). In
normal mode the ECC bits are calculated and stored on write
transactions.
* Move method out of try_init_dram_ddr3().
This satisfies point 2 and point 3 of the list above.
Change-Id: I76174ec962c9b0bb72852897586eb95d896d301e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The latest realtek RTS5261 SD daughterboard exposes the PRSNT# pin to
GPP_D16 but there is a RTS5261 requirement to pull up this pin and not
drive it at power on. We can meet this requirement without breaking
other boards by changing GPP_D16 to be a no-connect with an internal
pull up. Other boards use this signal as an enable input, so changing
this to pull up is OK.
BUG=b:162722965
TEST=Verified RTS5261 and GL9755 daughterboards enumerate on PCI and
can read SD cards.
Change-Id: I096d76ec12b7c3afaf02e621fd301b6704913d5d
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44116
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The interface selection register of the environment controller (EC)
gives the choice between "Internal generated 32 MHz" and "24 MHz" for
the "SST/PECI Host Controller Clock Selection".
Previously the chip was always configured for the 32 MHz clock. Add an
option that can be set from devicetree.cb to allow using the 24 MHz
clock.
Without this setting the automatic fan control on an Acer Aspire M3800
was slow to respond to temperature changes.
Signed-off-by: Michael Büchler <michael.buechler@posteo.net>
Change-Id: Ib2bce10a828fb4a7d837f6c5f5b1d00cc51be0ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44166
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This applies to the automatic fan control mode of the environment
controller (EC). Previously the affected bit was always cleared while
the default value is 1 according to datasheets. Add a variable that can
be set per mainboard in devicetree.cb.
In the IT8783E datasheet that bit is marked as reserved.
Signed-off-by: Michael Büchler <michael.buechler@posteo.net>
Change-Id: Ie74102ac0d54be33558c161c9c84594d121772b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44165
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Do it quick and dirty but in a reproducible manner. Variants will be set
up properly in subsequent commits.
Tested with BUILD_TIMELESS=1, both Lippert FrontRunner-AF and Toucan-AF
remain identical.
Change-Id: I71ff50099787e7806a9ab67429890a1c77061929
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43274
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On PCH-H the I2C4 0:19.0 device isn't usable and thus 0:19.1 and
0:19.2 can't be detected using standard PCI probing.
Remove I2C4, I2C5 and UART2 from generic ASL code on PCH-H platforms
that advertise its PCI conformance by the _ADR attribute.
Change-Id: I89f9ab7d4afb2e7d1b1e24d072adf99e0da6fecf
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44198
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Intel CPX-SP ww32 release has a number of bug fixes:
a. It fixed the issue related to some PCIe ports being hidden. This
affected DeltaLake config A, made the onboard PCIe NIC device not
working. ww32 release added two UPD parameters: PEXPHIDE, HidePEXPMenu.
b. It fixed the regression related to MRC cache.
c. It fixed the issue related to VT-d support, and added X2apic UPD
paramter. A separate PR will be submitted to enable VT-d in coreboot.
d. It fixed the issue related to enabling thermal device with PCI
or ACPI mode. [CB:44075] was submitted to enable it in coreboot.
e. It fixed the issue of FSP log level change UPD parameter DebugPrintLevel
not working.
There is a change in IIO UDS Hob.
TESTED=booted YV3 config A, and rebooted it. Access the target OS
remotely.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: Iaffcb9d635f185f9dd6d6fbe4457549984a993a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44257
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Currently, CIO gets enabled by the option Cio2Enable, but this
duplicates the devicetree on/off options. Therefore, depend on
the devicetree for the enablement of the CIO controller.
All corresponding mainboards were checked if the devicetree
configuration matches the Cio2Enable setting, and missing entries
were added.
Change-Id: I65e2cceb65add66e3cb3de7071b1a3cc967ab291
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44032
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently, SA IMGU gets enabled by the option SaImguEnable,
but this duplicates the devicetree on/off options. Therefore, depend on
the devicetree for the enablement of the SA IMGU controller.
All corresponding mainboards were checked if the devicetree
configuration matches the SaImguEnable setting, and missing entries
were added.
Change-Id: I293a20a321c75f82a57cbd5339656d93509b7aa6
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44031
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Currently, SDXC gets enabled by the option ScsSdCardEnabled,
but this duplicates the devicetree on/off options. Therefore, depend on
the devicetree for the enablement of the SDXC controller.
All corresponding mainboards were checked if the devicetree
configuration matches the ScsSdCardEnabled setting, and missing
entries were added.
Change-Id: I298b7d0b0fe2a7346dbadcea4be22dc67fce4de8
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44028
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
This reverts the code from commit 728c0787f2 that removes the reset
GPIO from the touchscreen ACPI interface.
That patch exposes a bug which leads to an invalid opcode trap in the
touchscreen code. Reverting this gets the system working again, but is
not a long-term solution.
BUG=b:162596241
TEST=System boots to login screen.
Change-Id: I57a070d94f961cec43834c8bedd5dafc8a54171a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43078
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently SA thermal subsystem gets enabled by the option Device4Enable,
but this duplicates the devicetree on/off options. Therefore depend on
the devicetree for enablement of the SA thermal subsystem controller.
All corresponding mainboards were checked if the devicetree
configuration matches the Device4Enable setting, and missing entries
were added.
Change-Id: I7553716d52743c3e8d82891b2de14c52c6d8ef16
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44026
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently HECI1 gets enabled by the option HeciEnabled, but this
duplicates the devicetree on/off options. Therefore use the on/off
options for the enablement/disablement of the HECI1 device.
All corresponding mainboards were checked if the devicetree matches
the HeciEnabled setting, and adjusted where necessary.
Change-Id: I03dd3577fbe3f68b0abc2d196d016a4d26d88ce5
Signed-off-by: Felix Singer <felix.singer@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44177
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
These values in GNVS are written, but never read/used. aoac.asl contains
proper ACPI power management functions for the AOAC devices that
directly access the state from the device's registers instead of relying
on cached values in GNVS, so the corresponding GNVS entries can be
dropped.
BUG=b:161165393
TEST=Mandolin still boots and dmesg shows no new ACPI errors.
Change-Id: Iee78df215308bd9b656228be787fac121d10ca99
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44245
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The MSR macros were treated as memory addresses and the loops had
off-by-one errors. This resulted in a CPU exception before GETSEC, and
another exception after GETSEC (once the first exception was fixed).
Tested on Asrock B85M Pro4, ACM complains about the missing TPM and
resets the platform. When the `getsec` instruction is commented-out, the
board is able to boot normally, without any exceptions nor corruption.
Change-Id: Ib5d23cf9885401f3ec69b0f14cea7bad77eee19a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44183
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Some cases could not be factored out while keeping reproducibility.
Also mark some potential bugs with a FIXME comment, since fixing them
while also keeping the binary unchanged is pretty much impossible.
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 does not change.
Change-Id: I27d6aaa59e12a337f80a6d3387cc9c8ae5949384
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42154
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PCIe RPC (Root Port Configuration) straps will force-disable some root
port functions if some root ports have a width greater than x1. In two
cases, this affects the last function. The PCIe init code will never
finish configuring the root ports if that is the case: it assumes that
the last function will eventually run through the code, but it doesn't.
If PCIe initialization does not complete, pressing the power button will
not power off the board, unless it is held for about five seconds. Also,
Windows 10 will show a BSOD about MACHINE CHECK EXCEPTION, and lock up
instead of rebooting. Depending on the microcode version, the BSOD may
not be visible. This happens even when the root port is not populated.
Use the strap fuse configuration value to know which configuration the
PCH is strapped to. If needed, update the number of ports accordingly.
In addition, print the updated value to ease debugging PCIe init code.
Existing code in coreboot disagrees with public documentation about the
root port width straps. Assume existing code is correct and document
these assumptions in a table, as an explanation for the added code.
Tested on Asrock B85M Pro4, PCIe initialization completes successfully.
Change-Id: Id6da3a1f45467f00002a5ed41df8650f4a74eeba
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44155
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Soften the hard dependency on SOC_INTEL_COMMON_BLOCK_SA by allowing CF9
resets to be used in place of global resets. If both types of reset are
available, prefer a global reset. This preserves current behavior, and
allows more platforms to use the TXT support code, such as Haswell.
Change-Id: I034fa0b342135e7101c21646be8fd6b5d3252d9e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44181
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Allow variants to override the SPD_SOURCE_PATH to allow supporting
different types of DDR.
BUG=b:163065661
TEST="emerge-volteer coreboot" and verify all variants build.
Change-Id: Id52e651848548a783d6d9f57e88f6099425b063e
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44274
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
In 'bootblock/pch.c', clear PCI_COMMAND_MASTER (BIT 2) prior to
programming PWRMBASE and enable BIT 2 after programming PWRMBASE
along with PCI_COMMAND_MEMORY (BIT 1).
Also perform below operations
1. Use pci_and_config16 instead of pci read and write
2. Use setbits32 instead of mmio read and write
Change-Id: I7a148c718d7d2b618ad6e33d6cec11bd0bce0937
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44205
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This patch removes the unnecessary enforcement of MP PPI in ICL
in order to have parity with other IA-SoC.
Now it allows user to select USE_INTEL_FSP_MP_INIT if required.
TEST=Able to build and boot ICL platform with either USE_INTEL_FSP_MP_INIT
or USE_INTEL_FSP_TO_CALL_COREBOOT_PUBLISH_MP_PPI selected.
Change-Id: I25288a24cdf9dceec45a90e4e7233225a6cab508
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44062
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
People who know a lot more about electrons and stuff than I do tell me
that leaving a HiZ pin floating without a pull resistor may waste power.
So if we find a pin to be HiZ when reading tristate strapping GPIOs, we
should make sure the internal pull-down is enabled when we're done with
it. (For pins that are externally pulled high or low, we should continue
to leave the internal pull disabled instead.)
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I1669823c8a7faab536e0441cb4c6cfeb9f696189
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44253
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Alexandru Stan <amstan@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GPIO_89 was marked as EN_DEV_BEEP_L in pre-v3.6 schematics, but it was
never really used on any of the zork variants. Starting with v3.6,
GPIO_89 is left unused in schematics.
This change configures GPIO_89 as PAD_NC in baseboard GPIO
table. Since EN_DEV_BEEP_L still needs to be driven high to allow
speakers to work, GPIO_89 is configured as PAD_GPO driven high on
pre-v3.6 schematics.
BUG=b:62108046
Change-Id: I026cd6cb598667ce6e115c3ec9357a6a56051d39
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44190
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds support for touchscreen power control using:
* GPIO_90 for trembyle based boards
* GPIO_32 for dalboz based boards
By default, baseboard tables configure these GPIOs as PAD_GPO driven
low and override trees expose these pads as enable_gpio to be used by
ACPI power resource.
In order to support pre-v3.6 boards, override tables configure these
pads as PAD_NC and drop the enable_gpio setting from device tree based
on board version.
BUG=b:161935640, b:162747210
Change-Id: Iba5e36b65b44ea11613b4d5fc8f13ce6433f83ab
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44193
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
v3.6 of reference schematics have switched the polarity of reset
signal to touchscreen controller from active high to active low. This
change updates the default configuration in baseboard gpio tables to
set the reset GPIO to output low and override tables in variants to set the
reset GPIO to output high. Additionally, devicetree by default exposes
ACTIVE_LOW configuration for reset GPIO. In order to support pre-v3.6
boards, reset GPIO is updated to ACTIVE_HIGH based on board version.
BUG=b:161937506
Change-Id: I092f274d8eb1920a1cd6d3eccbe8f26b0b28928a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44192
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
HP_INT_ODL is no longer connected to CODEC_GPI in schematic version 3.6.
Split variant_audio_update into update_dmic_gpio and update_hp_int_odl.
Changed GPIO_29 from PAD_NC to PAD_GPI in Trembyle. Changed GPIO_84 from
PAD_NC to PAD_GPI for Dalboz. Changed HP_INT_ODL to appropriate pin in
both boards devicetree.cb.
BUG=b:161938476
BRANCH=None
TEST=None
Cq-Depend: chromium:2335424
Change-Id: I05ffb063ab99823d07be6eaa911efbde3cc4ff55
Signed-off-by: Josie Nordrum <josienordrum@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44157
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add new ddr_memory_cfg structure to support both DDR4 and LPDDR4x
memory types.
Change existing variant code to use the new meminit_ddr() call
instead of calling meminit_lpddr4x() directly.
BUG=b:161772961
TEST='emerge-volteer coreboot chromeos-bootimage' and verify that
volteer still boots. NOTE that this only tests the lpddr4 side
of the implementation as I do not have a DDR4 board to test this on.
Change-Id: Id4bca2bfa97530f0d04a0e8d90f01b8281d2aea6
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44250
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Add a common routine meminit_ddr() that calls the appropriate meminit
routine based on whether the memory type requested is LPDDR4x or DDR4.
BUG=b:161772961
TEST='emerge-volteer coreboot chromeos-bootimage' and verify that
volteer still boots. NOTE that this only tests the lpddr4 side
of the implementation. I do not have a DDR4 board to test this on.
Change-Id: Ib2039eb89211efc48d10897eb679d05f567ae5a1
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44249
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Coverity detects an integer handling issue with BAD_SHIFT. The inline
function log2_ceil(u32 x) { return (x == 0) ? -1 : log2(x * 2 - 1); }
could return -1, which causes shifting by a negative amount value and
has undefined behavior. Add sanity check for the acm_header->size to
avoid shifting negative value.
Found-by: Coverity CID 1431124
TEST=None
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Ic687349b14917e39d2a8186968037ca2521c7cdc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44186
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This patch ensures that coreboot is able to take control of APs back
by doing a full AP re-initialization after FSP-S is done.
TEST=Able to see all cores available after booting to OS using below command
when coreboot is built with USE_INTEL_FSP_MP_INIT enable.
> cat /proc/cpuinfo
Without this CL :
shows only 1 core (only BSP)
With this CL :
shows all possible cores available (BSP + APs)
Change-Id: I247d8d1166c77bd01922323b6a0f14ec6640a666
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This patch makes init_cpus function external so that it can be used
in below scenarios:
1. When coreboot is doing MP initialization as part of
BS_DEV_INIT_CHIPS (exclude this call if user has selected
USE_INTEL_FSP_MP_INIT)
2. coreboot would like to take APs control back after FSP-S has done
with MP initialization based on user select USE_INTEL_FSP_MP_INIT
Also make sure post_cpus_init function is getting executed
unconditionally to update MTRR snapshot on all cores.
Change-Id: Idc03090360f34df074b33ba0fced2d192edf068a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44076
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add __packed to TYPE17_DMI_INFO structure to remove padding. Remove
reserved fields that are no longer required. Corresponding change will
also be made within fsp to pack the structure.
BUG=b:154046847
TEST=Boot a trembyle with and without the reserved fields and confirm
type 17 table is unchanged.
Cq-Depend: chrome-internal:3194239
Change-Id: I9ba7e2a4fb82c7b0b77ee7c6c075e6211d4f6adf
Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44086
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Includes changes in mipi_camera driver to fix following issues related
to SSDT generation for IPU devices.
1. acpigen_write_device was not getting called for IPU devices
2. acpigen_pop_len was called for a generic devices without calling
acpigen_write_device
Change-Id: I309edd065719cb8250f1241898bb5854004d2a9f
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44025
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The device is a PCIe to eMMC bridge controller to be used in the
Chromebook as the boot disk. The datasheet name is GL9763E and
the revision is 02.
The patch sets single request AXI, disables ASPM L0s and enables SSC.
Signed-off-by: Ben Chuang <benchuanggli@gmail.com>
Change-Id: I158c79f5ac6e559f335b6b50092469c7b1646c56
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Ideally don't need to mark the entire top_of_ram till TOLUD range (used
for stolen memory like GFX and ME, PTT, DPR, PRMRR, TSEG etc) as
cacheable for OS usage as coreboot already done with mpinit w/ smm
relocation early.
TEST=Able to build and boot ICL, TGL RVP.
Without this CL :
PCI: 00:00.0 resource base 77000000 size 4800000 align 0 gran 0 limit 0 flags f0004200 index 9
PCI: 00:00.0 resource base 7b800000 size 4400000 align 0 gran 0 limit 0 flags f0000200 index a
With this CL :
PCI: 00:00.0 resource base 77000000 size 8c00000 align 0 gran 0 limit 0 flags f0000200 index 9
No changes observed with MTRRs snapshot.
Change-Id: I64c14b14caf0a53219fdc02ec6bbd375955a0c8e
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The VT-d architecture specification (Doc. D51397-011, Rev. 3.1) says:
BIOS implementations must report these remapping structure types in
numerical order. i.e., All remapping structures of type 0 (DRHD)
enumerated before remapping structures of type 1 (RMRR), and so forth.
So, update the corresponding code to adhere to the specification.
Change-Id: I2446d536603559f637f3f8b1b44e9d712aa35492
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44112
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
The VT-d architecture specification (Doc. D51397-011, Rev. 3.1) says:
BIOS implementations must report these remapping structure types in
numerical order. i.e., All remapping structures of type 0 (DRHD)
enumerated before remapping structures of type 1 (RMRR), and so forth.
So, update the corresponding code to adhere to the specification.
Change-Id: Ib5ef5e006e590d72bec52e057e9b72150e0e636f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44111
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
The VT-d architecture specification (Doc. D51397-011, Rev. 3.1) says:
BIOS implementations must report these remapping structure types in
numerical order. i.e., All remapping structures of type 0 (DRHD)
enumerated before remapping structures of type 1 (RMRR), and so forth.
So, update the corresponding code to adhere to the specification.
Change-Id: I4ee3ae6c45e2a2c921fbccbb62b853e4a141a58d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44110
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
The VT-d architecture specification (Doc. D51397-011, Rev. 3.1) says:
BIOS implementations must report these remapping structure types in
numerical order. i.e., All remapping structures of type 0 (DRHD)
enumerated before remapping structures of type 1 (RMRR), and so forth.
So, update the corresponding code to adhere to the specification.
Change-Id: I1f84cae41c6281e0d545669f1e7de5cab0d9f9c0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44109
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Add Kontron/bSL6 together with Siemens/Boxer26, a baseboard for the
bSL6.
The plain bSL6 variant received little testing and only during early
development. The Boxer26 variant is actively used and fully tested.
The latest rebase was boot tested with FILO and Linux 4.19.
Change-Id: If2b6a3f1e9dd095463f1f1521068b9f66a9189c5
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Signed-off-by: Felix Singer <felix.singer@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29480
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove const struct imd *imd and const struct imdr *imdr parameters from
the prototypes of imdr_entry_size(), imd_entry_size() and imd_entry_id()
functions since they are not used anywhere.
Signed-off-by: Anna Karas <aka@semihalf.com>
Change-Id: I6b43e9a5ae1f1d108024b4060a04c57f5d77fb55
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43999
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In kernel clk for AMD SoCs we expose a generic clk by the name oscclk1.
This oscclk1 is a fixed 48Mhz frequency clk in RV.
In Zork oscout system clock is linked to rt5682 mclk. Setting mclk-name to
oscclk1 tells rt5682 driver its mclk is oscclk1.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
BUG=b:158906189
TEST=rt5682 driver get the correct clk and tested audio playback
Change-Id: Ic565e8e0573e085e5759b2d3688cc0a4533b67fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44010
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
RV has difference in clk framework. In RV we get a 48Mhz fixed clk,
while in ST we had 25Mhz, 48mhz clocks and a Mux to select between them.
To differentiate set the fmw property to 1 for boards using RV family of SoC.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
BUG=b:158906189
TEST=rt5682 driver get the correct clk and tested audio playback
Change-Id: I685ded1607c2c7edc5e48f0bada258ebde192bb8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44009
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
- Single channel DDR3L: requires mrc.bin (extracted from ChromeBook
firmware)
- Tested, working with: 2GB SK Hynix stick, 4GB Samsung stick
- VGA: Video works with VGA rom extracted from UEFI
- SeaBIOS (runs the option rom) tested, works in text mode
- GRUB2 (coreboot runs the option rom) tested, works in VESA mode,
no video in text mode
- USB: Both USB2.0 ports work using the EHCI controller
- Works in both SeaBIOS, GRUB2 and Linux
- Serial: driven by an IT8728F SuperIO
- Works as a console in coreboot, SeaBIOS and GRUB2
- Works with interrupts in Linux after a cold boot, after a warm
reboot IRQs get lost
- SATA: 2 ports on board (one is mSATA)
- SATA init works with both refcode.elf and native refcode
(patch CB:43133)
- Booting from SATA works with GRUB2, SATA works in Linux
- Patch CB:44088 fixes SATA in SeaBIOS
- 4 PCIe Intel ethernet controllers
- Only tested in Linux, all 4 work with the igb driver
- Power button, reset button and both indicator LEDs work
- Optional fan header is not tested as the appliance is passively
cooled
- TXE (ME): optional, does not shut down after 30 minutes without the
TXE blob
- Works with TXE blob left as is, shows up on PCI
- Works with the entire TXE section wiped, no device on PCI,
intelmetool can't find anything
Used rambi as an example, but almost everything is modified as the two
boards are very different.
Signed-off-by: Mate Kukri <kukri.mate@gmail.com>
Change-Id: I99ed0c94c3255578151f940ad9b274e6f0816bfe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43087
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This follows CB:44047 which probably missed this because it's a
custom assert macro (in code that has only recently been added to
build checks). Without this change, building with gcov fails because
gcc_assert(0) can be build-time verified (as introduced by CB:44044)
while we need runtime failure semantics here.
Change-Id: I71a38631955a6a45abe90f2b9ce3a924cc5d6837
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44105
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Before this change, we have this problem (boot log from DeltaLake
config A server):
Jumping to boot code at 0x00040000(0x755f6000)
Stack overrun on CPU0 (address 0x7574a000 overwritten). Increase stack from current 4096 bytes
ERROR: BUG ENCOUNTERED at file 'src/lib/stack.c', line 43
Linux version 4.16.18
Configure STACK_SIZE to make it larger to fix above problem.
Now, we have this boot log:
BS: BS_PAYLOAD_LOAD exit times (exec / console): 326 / 21727 ms
Jumping to boot code at 0x00040000(0x752f2000)
CPU0: stack: 0x75746000 - 0x7574a000, lowest used address 0x7574681c, stack used: 14308 bytes
Linux version 4.16.18
TESTED=booted YV3 config A to target OS.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: Ia04a3ee0cd37177ecab65469855a1cf920742458
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
CPX-SP FSP is FSP 2.2, so select PLATFORM_USES_FSP2_2. SKX-SP continues
to select PLATFORM_USES_FSP2_0, as SKX-SP FSP is FSP 2.0.
Correct DCACHE_RAM_BASE. Increase FSP_TEMP_RAM_SIZE, DCACHE_BSP_STACK_SIZE,
and adjust DCACHE_RAM_SIZE accordingly. Thus the workaround of hardcoding
StackBase and StackSize FSP-M UPD parameters is removed.
Add CPX-SP soc implementation of soc_fsp_multi_phase_init_is_enable()
to indicate that FSP-S multi phase init is not enabled, since it is
not supported by CPX-SP FSP.
TESTED=booted YV3 config A to target OS.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I25e39083df1ebfe78871561b0a0e230b66524ea9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44049
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Like the QPI Link device, there can be more of these devices on
multi-socket platforms. So, name it Physical Layer 0.
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 remains identical.
Change-Id: Ia5f6e42a742bc69237de38f1833e56c8da7c4f7e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
On multi-socket platforms, there can be two QPI buses, each with its own
PCI device. We only have one QPI link on Arrandale, though. In case
support for multi-socket processors ever gets added, name it Link 0.
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 does not change.
Change-Id: I6481154a2d1cc1c84c1f167a374a62af3b2cf3d8
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43735
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Uppercase variable names can be confused with register definitions. Use
lowercase names instead, conforming to the coding style guidelines.
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 remains identical.
Change-Id: I61a28bf964ea8c2c662539825ae9f2c88348bdba
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43730
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Looks like some registers are defined twice. Also, group some QPI
registers together. They were scattered around and mixed with the host
bridge registers, probably because other northbridges have such
registers in the host bridge's PCI config space. But not Ironlake.
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 remains identical.
Change-Id: I6e60f7fcb1467f302618eeab1b0d995920a98569
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43726
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Observed thermal shutdown initiated by DPTF due to CPU temperature
reaching critical temperature trip value. During stress testing with
heavy workload like WebGL Aquarium, sometime CPU temperature spikes
till 99 degree Celsius and DPTF initiates system shutdown. This
updates CPU critical temperature trip value to 105 degree Celsius
to avoid system shutdown.
BUG=b:161993459
BRANCH=None
TEST=Built and tested on dedede system
Change-Id: If15a873a997aa80f20940f27bbafd4498908c091
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44054
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Converts bit fields macro to target PAD_CFG_*() macros, which were
hidden in the comments. To do this, the following command was used:
./intelp2m -n -t 1 -p apl -file ./test/up-gpio.h
This is part of the patch set
"mb/up/squared: Rewrite pad config using intelp2m":
CB:42608 - 1/3 Decode raw register values
CB:42915 - 2/3 Exclude fields that are not in PAD_CFG*
CB:39765 - 3/3 Converts bit field macros to PAD_CFG
Tested with BUILD_TIMELESS=1, its coreboot.rom does not change.
Change-Id: I266ec6fa10a9691a7b7d3cd6f2792624e8bd53d5
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39765
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This patch excludes bit fields that must be ignored in order to convert
current macros to target PAD_CFG_*() macros. The following commands
were used for this:
./intelp2m -ii -fld cb -ign -t 1 -p apl -file ./up-gpio.h
This is part of the patch set
"mb/up/squared: Rewrite pad config using intelp2m":
CB:42608 - 1/3 Decode raw register values
CB:42915 - 2/3 Exclude fields that are not in PAD_CFG*
CB:39765 - 3/3 Converts bit field macros to PAD_CFG
Change-Id: Ic9b6e63c1b84b97726886bef35c434dd9153eb78
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42915
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Use the intelp2m utility [1] with -fld=cb options to convert the pad
configuration format with the raw values of the DW0 and DW1 registers
to the format with the bit fiends macros: PAD_FUNC(), PAD_RESET(),
PAD_TRIG(), PAD_BUF(), PAD_PULL(), etc... Also use the -ii options to
generate the target macro in the comments, so that it is easier to
understand what result we should get:
./intelp2m -ii -fld cb -t 1 -p apl -file ./up-gpio.h
This is part of the patch set
"mb/up/squared: Rewrite pad config using intelp2m":
CB:42608 - 1/3 Decode raw register values
CB:42915 - 2/3 Exclude fields that are not in PAD_CFG*
CB:39765 - 3/3 Converts bit field macros to PAD_CFG
[1] https://review.coreboot.org/c/coreboot/+/35643
Tested with BUILD_TIMELESS=1, its coreboot.rom does not change.
Change-Id: I2523439af8842365c7de901bdfad85ad16d25dcf
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Many places in coreboot seem to like to do things like
assert(CONFIG(SOME_KCONFIG));
This is somewhat suboptimal since assert() is a runtime check, so you
don't see that this fails until someone actually tries to boot it even
though the compiler is totally aware of it already. We already have the
dead_code() macro to do this better:
if (CONFIG(SOME_KCONFIG))
dead_code();
Rather than fixing all these and trying to carefully educate people
about which type of check is more appropriate in what situation, we can
just employ the magic of __builtin_constant_p() to automatically make
the former statement behave like the latter.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I06691b732598eb2a847a17167a1cb92149710916
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44044
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
I would like to make assertions evaluate at compile time where possible,
but sometimes people used a literal assert(0) to force an assertion in a
certain code path. We already have BUG() for that so let's just replace
those instances with that.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I674e5f8ec7f5fe8b92b1c7c95d9f9202d422ce32
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44047
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
According to my SC7180 reference manual, these three GPIOs are in the
NORTH TLMM, but our pin table lists them as SOUTH. That means all
accesses our code has been doing to them have just been hitting empty
address space.
BUG=b:160115694
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: If9c03ac890a7975855394c2e08b8433472df204d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43983
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
ACPI_GPIO_IRQ_EDGE_BOTH sets both edges as wake. The desired behavior is wake on rising edge, change to ACPI_GPIO_INPUT_ACTIVE_LOW.
Fixing for both Volteer and Volteer2 variants.
BUG=b:146083964
BRANCH=None
TEST=tested on a Volteer
Change-Id: I2d3339151bf4e2cbae60aaf97ba1bd7909a2b9a9
Signed-off-by: Alex Levin <levinale@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44089
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Fix multiple issues allowing to boot until "Payload not loaded":
* The FMAP_CACHE was placed in memory mapped flash
- Place the FMAP_CACHE in DRAM.
* The FMAP_CACHE was overlapping the BOOTBLOCK, which has a default size
of 128KiB.
- Increase the bootblock size in memlayout to 128KiB to match the FMAP.
* The heap in bootblock wasn't usable.
- Add a linking check in armv7 common bootblock to relocate itself to
the linked address.
* A FIT payload couldn't be compiled in as the POSTRAM_CBFS_CACHE was
missing.
- Add the POSTRAM_CBFS_CACHE to memlayout.
* The coreboot log is spammed with missing timestamp table error messages
- Add TIMESTAMP table to memlayout.
Tested on QEMU armv7 vexpress.
Change-Id: Ib9357a5c059ca179826c5a7e7616a5c688ec2e95
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
PCIe bus:function specifiers need to be coalesced the same way
functions are coalesced during bus enumeration. Invoke PCIe root port
devicetree update to swap the enabled root port devices with the
disabled devices.
At this point, the TGL pci_devs.h only describes the PCH-LP, so only
the PCH-LP root ports are listed in this patch. We'll need to add
additional PCIe root ports when PCH-H support is added.
BUG=b:162106164
TEST=Ensure that the PCIe device 1c.7 corresponding to Root port 8 is
swapped with the PCIe device 1c.0 corresponding to Root port 1.
Change-Id: I9230de8b1818f3f2115dab923841fd0e7778be62
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43850
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This change updates the mipi_camera driver to handle shared power
resource between multiple cameras. This is achieved by adding a guard
variable and methods to manipulate the guard variable before calling
the actual platform method which enables or disables the resource.
PowerResource will call these guarded methods to enable or disable the
resource. This protects the shared resource from being enabled or
disabled multiple times while the other camera is using the resource.
Example:
Consider a platform where two cameras are sharing a GPIO resource 0xXX
and both the cameras calls enable and disable guarded methods for this
GPIO. Actual platform disable method for the GPIO is called only after
the last camera using the GPIO calls DSBx method and RESx becomes 0.
Scope (\_SB.PCI0)
{
Name (RESx, Zero)
Method (ENBx, 0, Serialized)
{
If ((RESx == Zero))
{
\_SB.PCI0.STXS (0xXX)
}
RESx++
}
Method (DSBx, 0, Serialized)
{
If ((RESx > Zero))
{
RESx--
}
If ((RESx == Zero))
{
\_SB.PCI0.CTXS (0xXX)
}
}
}
Change-Id: I1468459d5bbb2fb07bef4e0590c96dd4dbab0d9c
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43003
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This config is meant to build-test several options, such as SMMSTORE,
UBSAN, SIL3114 driver, EM100 support, code coverage and debug options.
Please do not try to use it on real hardware. Or maybe do try.
Change-Id: I8bc19a1987b405d5a654276050b00b956acbdf36
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43977
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Giant commit aee7ab2 (soc/intel/braswell: Clean up) reformatted comments
to follow the coding style, among many other things. This commit updates
some comments on Bay Trail with two objectives: follow the coding style,
and reduce the differences between Bay Trail and Braswell.
Tested with BUILD_TIMELESS=1, Google Ninja remains identical.
Change-Id: Ibe942a20c624e2c74801c8816616ec83851949af
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43935
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
SeaBIOS on Bay Trail would time out when trying to access a SATA drive.
Turns out that there's two mistakes in the SATA initialization sequence:
- PCI register 0x94 is wrongly cleared with a bitwise-and operation.
- PCI register 0x9c is instead written to 0x98, clobbering the latter.
After correcting them, SeaBIOS can boot from SATA on Asrock Q1900M.
Change-Id: I5cc4b9b1695653066f47de67afc79f08f0341cc5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44088
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Máté Kukri <kukri.mate@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
FSP default UPD for SkipMpInit is set to 0 which refers to run CPU
feature programming on all cores (BSP + APs).
Setting SkipMpInit=1 is not recommended as it will only limit CPU
feature programming on BSP.
TEST=Able to perform CPU feature programming by FSP on all cores
using external MP PPI services.
Change-Id: I22e70f5f15e53c5fabd78cc3698c4d718b607af6
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44058
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Jenkins complains about `const char *` and says it should instead be
changed to `const char *const`. So, change it so that Jenkins is happy.
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 does not change.
Change-Id: Iecd5fecdefdc2effd0114706648747460d0a4a72
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42630
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Looks like UBSan isn't being build-tested, and the toolchain has been
updated several times since UBSan support was added. Unexpectedly, it
no longer builds when using GCC from the current toolchain version.
To fix this, rename an error handler and add a newly-introduced handler
for `__ubsan_handle_pointer_overflow`, which works like the existing
handlers. A config file to allow build-testing UBSan is added later.
Change-Id: I5980730d8d22fa1d0512846c203004723847cc6d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43975
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add TXT ramstage driver:
* Show startup errors
* Check for TXT reset
* Check for Secrets-in-memory
* Add assembly for GETSEC instruction
* Check platform state if GETSEC instruction is supported
* Configure TXT memory regions
* Lock TXT
* Protect TSEG using DMA protected regions
* Place SINIT ACM
* Print information about ACMs
Extend the `security_clear_dram_request()` function:
* Clear all DRAM if secrets are in memory
Add a config so that the code gets build-tested. Since BIOS and SINIT
ACM binaries are not available, use the STM binary as a placeholder.
Tested on OCP Wedge100s and Facebook Watson
* Able to enter a Measured Launch Environment using SINIT ACM and TBOOT
* Secrets in Memory bit is set on ungraceful shutdown
* Memory is cleared after ungraceful shutdown
Change-Id: Iaf4be7f016cc12d3971e1e1fe171e6665e44c284
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
DeltaLake is a single socket server. Its platform design has 1 DIMM
slot per channel. There are 6 DIMM slots.
Configure DIMM_MAX to overwrite SOC default.
Change-Id: I47ecc81452fe59ed59fd3a239ffe329cbc031d7a
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44048
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
CPX-SP processor has 2 IMC, there are 3 channels per IMC,
2 DIMMs per channel.
It supports DDR4.
Configure default values for DIMM_MAX and DIMM_SPD_SIZE accordingly.
Change-Id: I66cc512465362d5ba04dc36534360c94ca23e77a
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43982
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add driver for OCP specific ipmi commands. With this driver, OCP
specific ipmi command can be used after implementing functions here.
TEST=Build with CB:42242 on Delta Lake, select Kconfig option:
IPMI_OCP and add device in devicetree to open this function.
Use ipmi-util in OpenBMC to dump raw data and check if this
function work.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I2efa85978ec4ad3d75f2bd93b4139ef8059127ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43996
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The only reason to use a named choice statement is if you plan on
having the choice statement in multiple places. Since the `TGL_EC`
name is not used anywhere else, we might as well get rid of it.
Change-Id: Ic0bddefd007ef961bbff61fd656475cae78148e2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43836
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Put `__weak` at the beginning of functions and reflow lines to leverage
the increased line width of 96 characters.
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 does not change.
Change-Id: I3a5fd2d4344b83e09f89053c083ec80aa297061e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44020
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Fill in the maximum DRAM capacity and slot count read from CAPID0_A
registers on Sandy Bridge and Haswell.
While the register isn't part of the Core Series datasheet, it can be
found in the corresponding "Intel Open Source Graphics Programmer's
Reference" datasheets.
Note that the values for DDRSZ (maximum allowed memory size per channel)
need to be halved when only one DIMM per channel is supported. On mobile
platforms, all but quad-core processors are subject to this restriction.
Tested on Lenovo X230:
On Linux, verify that `dmidecode -t 16` reports the actual maximum
capacity (16 GiB) instead of the currently-installed capacity (4 GiB) or
the max capacity assuming two DIMMs per channel is possible (32 GiB).
Change-Id: I6e2346de1ffe52e8685276acbdbf25755f4cc162
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43971
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
The `GetPhysicallyInstalledSystemMemory` API call, at least on Windows
10, returns an error if SMBIOS tables are invalid. Various tools use
this API call and don't operate correctly if this fails. For example,
the "Intel Processor Diagnostic Tool" program is affected.
Windows then guesses the physical memory size by accumulating entries
from the firmware-provided memory map, which results in a total memory
size that is slightly lower than the actual installed memory capacity.
To fix this issue, add the handle to a type 16 entry to all type 17
entries.
Add new fields to struct memory_info and fill them in Intel common code.
Use the introduced variables to fill type 16 in smbios.c and provide
a handle to type 17 entries.
Besides keeping the current behaviour on intel/soc/common platforms, the
type 16 table is also emitted on platforms that don't explicitly fill
it, by using the existing fields of struct memory_info.
Tested on Windows 10:
The GetPhysicallyInstalledSystemMemory API call doesn't return an error
anymore and the installed memory is now being reported as 8192 MiB.
Change-Id: Idc3a363cbc3d0654dafd4176c4f4af9005210f42
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43969
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marcello Sylvester Bauer <sylv@sylv.io>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Set platform defaults for SPI settings in Kconfig for EFS.
BUG=b:158755102
TEST=Build and boot test on Tremblye and Morphius. Verify
values in output image in a hex editor. Measure 1st x86
timestamp, perf improves by over a second.
Change-Id: I765dada14700f4800263d2d3844af07fad0e5b71
Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43303
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There was a mix of open coding DXIO logical lane numbers and clkreq
pins. And there are separate macros depending on the baseboard
as well as processor type. Remove the indirection and supply the values
directly in the descriptors.
BUG=b:162423378
Change-Id: I779cb0a514e3b668265e6039d6e7e7bd0f3d49ed
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
It is expected TCSS D3Hot is enabled. D3Cold configuration is
through SoC stepping determination. D3Cold is disabled on pre-QS
platform and enabled on QS platform.
BUG=None
TEST=Verified both of TCSS D3Hot and D3Cold configuration on Volteer.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I9a8b838dcb449ca78d15b18543d97d84b59417ac
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44004
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Divya S Sasidharan <divya.s.sasidharan@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update configuration for both of TCSS D3Hot and D3Cold. It is expected
D3Hot is enabled for all platforms. Because there are known limitations
for D3Cold enabling on pre-QS platform, this change reads cpu id and
disables D3Cold for pre-QS platform. For QS platform, D3Cold is
configured to be enabled.
BUG=None
TEST=Verified D3Hot is enabled, D3Cold is disabled for pre-QS (cpu:806c0)
and enabled for QS (cpu:0x806c1).
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I534ddfefcd182f5b35aa5e8b461f0920d375a66d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43980
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Divya S Sasidharan <divya.s.sasidharan@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently HDA gets enabled by the option EnableAzalia, but
this duplicates the devicetree on/off options. Therefore use
the on/off options for the enablement of the HDA controller.
I checked all corresponding mainboards if the devicetree configuration
matches the EnableAzalia setting.
Change-Id: Id20d023b2f286753fb223050292c7514632e1dd3
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43866
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently HECI3 gets enabled by the option Heci3Enabled, but
this duplicates the devicetree on/off options. Therefore use the
on/off options for the enablement of the HECI3 controller.
I checked all corresponding mainboards if the devicetree configuration
matches the Heci3Enabled setting.
Change-Id: I4f99d434dfee49a9783e38c3910b9391d479cb83
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43864
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently eMMC gets enabled by the option ScsEmmcEnabled, but this
duplicates the devicetree on/off options. Therefore use the
on/off options for the enablement of the eMMC controller.
I checked all corresponding mainboards if the devicetree configuration
matches the ScsEmmcEnabled setting.
Change-Id: I3b86ff6e2f15991fb304b71d90c1b959cb6fcf43
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Currently TraceHub gets enabled by the option EnableTraceHub, but this
duplicates the devicetree on/off options. Therefore use the on/off
options for the enablement of the TraceHub controller.
I checked all corresponding mainboards if the devicetree
configuration matches the EnableTraceHub setting.
Change-Id: Idcd1e5035bc66c48620e4033d8b4988428e63db9
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43847
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently SMBus gets enabled by the option SmbusEnable, but this
duplicates the devicetree on/off options. Therefore use the on/off
options for the enablement of the SMBus controller.
I checked all corresponding mainboards if the devicetree configuration
matches the SmbusEnable setting.
Change-Id: I0d9ec1888c82cc6d5ef86d0694269c885ba62c41
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43845
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Currently LAN gets enabled by the option EnableLan, but this
duplicates the devicetree on/off options. Therefore use the on/off
options for the enablement of the LAN controller.
I checked all corresponding mainboards if the devicetree configuration
matches the EnableLan setting.
Change-Id: I36347e8e0f0ddba47aec52aeb6bc047e3c8bfaa4
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43844
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Currently SATA gets enabled by the option EnableSata, but this
duplicates the devicetree on/off options. Therefore use the on/off
options for the enablement of the SATA controller.
I checked all corresponding mainboards if the devicetree configuration
matches the EnableSata setting.
Change-Id: I217dcb7178f29bbdeada54bdb774166126b47a5a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
This change updates TGLRVP configuration to have USB Type-C connector
device properties filled into ACPI SSDT.
TEST=Built and booted to kernel on tglrvp boards. Verified the USBC
scope under LPCB.EC0.CREC with required connector device properties.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Ifd4c59afb3b8a222598fd4ff36d72c4b877bdad2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43893
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The HSIO tuning guide recommendation for the default USB3 settings is to
have de-emphasis set to -3.5dB with the equation 20*log(X/64). 0x29 results
in a value close to -3.5dB and it is the value that was used for the default
on past platforms so I used it here as well.
BUG=b:160721468
TEST=Ensure WWAN device does not disconnect during use.
Change-Id: Ia594996cb55523dacce0d4bef98cc217321c62de
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43831
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Add supported memory parts in the mem_list_variant.txt and generate the
SPD ID for the parts. The memory part being added is:
MT53E512M32D2NP-046 WT:E
K4U6E3S4AA-MGCR
H9HCNNNBKMMLXR-NEE
MT53E1G32D2NP-046 WT:A
K4UBE3D4AA-MGCR
BUG=None
TEST=Build the magalor board.
Change-Id: I7bb19d6d4a66e66fed0564592c803c2af1045b0c
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43989
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This patch uses the fill_processor_name function in order
to fetch the CPU Name.
TEST = Successfully able to build boot Waddledoo and verify the
cpu_name from CPU log "CPU: Genuine Intel(R) CPU 0000 @ 1.10GHz".
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I532e05d9bb71fdff24e086e81ec72ffe8dc2c22d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43480
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Strip manufacturer information from SPDs before injecting into APCB.
This allows more flexibility around changing DRAM modules in the future.
BUG=b:162098961
TEST=Boot, dump memory info
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I1bbc81a858f381f62dbd38bb57b3df0e6707d647
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43832
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add interrupts for all enabled superio devices to quiet the warning
about missing interrupts in devicetree.
Vendor uses interrupt 0x00 for all devices except SUART* and KBC, so
let's do that, too. This also changes SWC from 0x0b to 0x00.
Verified with superiotool on X11SSM-F.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I7a6dc7345f020e53415a7d0d104ce93ab4b194fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonas Löffelholz
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
They're more or less the same but reworked for hopefully some more
clarity. There have been some best practices around documenting the
reason for expedited processing so let's make them official, too.
Change-Id: I620e48016a1ceda2ac43f26624ed21af01f6a0a5
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43484
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add VPD variables for enabling/disabling FRB2 watchdog timer and setting
the timer countdown value in romstage. By default it would start the timer
and trigger hard reset when it's expired. The timer is expected to be
stopped later by payload or OS.
Add RO_VPD and RW_VPD sections.
Tested on OCP Tioga Pass.
Change-Id: I53b69c3c5d22c022130fd812ef26097898d913d0
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39690
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
When emitting a fan's _FPS (Fan Performance States) table, the revision
field was missing. According to ACPI spec 6.3, the current revision is
zero, so add that Package entry before the others.
BUG=b:149722146
TEST=verified first element of \_SB.DPTF.TFN1._FPS is 0
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: If16d4751f1d924807f5087d93b348e58d5265197
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43978
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable the Kconfig flag VBOOT_VBNV_CMOS_BACKUP_TO_FLASH for psp_verstage
to save the vbnv data to the SPI rom.
BUG=b:161366241
TEST=Boot Morphius, Read rom from SPI and extract the RW_NVRAM region.
See that it's getting updated.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I0d4b92fa321a8409468b8d8fc40be0d4b57b664b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43487
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Two usb Type-C ports under the actual mux device. Each port has its own
ACPI device entry. These nodes are the ones that the USB Type-C
port/connector device will refer to in order to configure the mux.
TEST=Built image-tglrvp-up4.bin successfully.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I8423ddbb5bc189899a9e19e7da6e2ee7b7fecc18
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Currently, if PSPBTLDR_FILE is empty, the md5sum will hang forever on
stdin, leading to the appearance of a hung script. This is
confusing.
There's no option to md5sum to say "you must use this file", so instead,
use dd with if to ensure we at least get an error if the file is not found.
Not optimal, but better than what we have now.
Change-Id: Ia13035bc592bdf2a515dfd2e052ae9135e218612
Signed-off-by: Ronald G Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43677
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Fill in the new fields introduced with version 3.0 and install the new
entry point structure identified by _SM3_.
Tested on Linux 5.6 using tianocore as payload:
Still able to decode the tables without errors.
Change-Id: Iba7a54e9de0b315f8072e6fd2880582355132a81
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Replace functionally identical files with t440p/acpi/superio.asl which
is licensed under more flexible terms (GPL-2.0-only or no licensing
terms vs. GPL-2.0-or-later). Apart from licensing terms these files are
identical.
This makes diff between boards smaller.
Change-Id: I1cd4a85b65ceaa0a383416e7276ad41a41783cb7
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43685
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Follow schematic to modify USB port setting and clean up I2C clock tuning.
USB2 [0]: USB Type C Port 0
USB2 [1]: USB Type C Port 1
USB2 [2]: None
USB2 [3]: USB Type A Port 1
USB2 [4]: None
USB2 [5]: Camera
USB2 [6]: None
USB2 [7]: WLAN module - BlueTooth
USB3 [0]: USB Type C Port 0 (M/B side)
USB3 [1]: USB Type C Port 1 (Sub/B side)
USB3 [2]: None
USB3 [3]: USB Type A Port 1
USB3 [4]: None
USB3 [5]: None
BUG=b:161407664
BRANCH=NONE
TEST=Build the coreboot image on madoo board.
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: Ia73593f52adee3806e725127891f084a08bf1360
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43750
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This copies over the USB daughterboard device tree config from volteer
to volteer2. These two boards are basically identical in this area so
the config should also be identical.
BUG=b:158673460
TEST=none
Change-Id: If8a82bc18b36d92a1c851b49612edfbefa18ec54
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Re-organize the existing generic wifi driver into a generic wifi chip
driver. This allows generic wifi chip information to be added to the
devicetree.
BUG=None
TEST=./util/abuild/abuild
Change-Id: I63f957a008ecf4a6a810c2a135ed62ea81a79fe0
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43768
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
BUG=b:161734657
TEST=Ensure that the discrete WiFi information is built into ACPI table.
Scope (\_SB.PCI0.RP01)
{
Device (WF00)
{
Name (_UID, 0x923ACF1C) // _UID: Unique ID
Name (_DDN, "WIFI Device") // _DDN: DOS Device Name
Name (_ADR, 0x00000000) // _ADR: Address
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x43,
0x03
})
}
}
Change-Id: I9a9259e167fc213291b89e151729553ec4649eaf
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43769
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On Haswell platforms, the processor and the PCH are two separate dies,
and communicate through a high-speed bus. This is DMI (Direct Media
Interface) on traditional two-package platforms, but single-package
Haswell LP variants use OPI (On-Package Interconnect) instead.
Since OPI is not routed through the mainboard, most link parameters are
static and cannot be changed. OPI self-initializes on boot, anyway.
However, DMI needs to be initialized in firmware. On Haswell, the MRC
initializes the physical DMI link, but things like topology and power
management need to be configured as well. And we don't do that properly.
We enable ASPM on the PCH side of the DMI link, but not on the SA side.
Both sides need to use the same settings, so enable DMI ASPM on the SA.
Clearing the error status bits needs to be done on all Haswell variants.
Tested on Asrock B85M Pro4, still boots.
Change-Id: Ie97ff56eec9f928cfd2d5d43a287f3e0d2fbf3cf
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Looks like no one really knows what this bit would be useful for, nor
when it would need to be set. Especially if coreboot is setting it even
on PCI *Express* bridges. Digging through git history, nearly all
instances of setting it on PCIe bridges comes from i82801gx, for which
no reason was given as to why this would be needed. The other instances
in Intel code seem to have been, unsurprisingly, copy-pasted.
Drop all uses of this definition and rename it to avoid confusion. The
negation in the name could trick people into setting this bit again.
Tested on Asrock B85M Pro4, no visible difference.
Change-Id: Ifaff29561769c111fb7897e95dbea842faec5df4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Remove the obscure path in source code, where ACPI S3 resume
was prohibited and acpi_resume() would return and continue
to BS_WRITE_TABLES.
The condition when ACPI S3 would be prohibited needs to be
checked early in romstage already. For the time being, there
has been little interest to have CMOS option to disable
ACPI S3 resume feature.
Change-Id: If5105912759427f94f84d46d1a3141aa75cbd6ef
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Since there aren't any other variants, we can move things between the
devicetree and the overridetree.
Built with BUILD_TIMELESS=1, resulting coreboot.rom does not change.
Change-Id: I54aac67237a3850dbf11f58bd41aba87505214f3
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43927
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Todor is created to take the place of terrador therefore
copying terrador content into todor's setup.
BUG=b:162110806
BRANCH=None
TEST=util/abuild/abuild -p none -t google/volteer -x -a
make sure the build includes GOOGLE_TODOR
Signed-off-by: YH Lin <yueherngl@google.com>
Change-Id: I63151728a04f2252ca8a77158a2656ad8b1e1b51
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43841
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Create the todor variant of the volteer reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.1.1).
In addition,
* sort the variant names in alphabetical order.
* todor uses the same config options as terrador.
BUG=b:162110806
BRANCH=None
TEST=util/abuild/abuild -p none -t google/volteer -x -a
make sure the build includes GOOGLE_TODOR
Signed-off-by: YH Lin <yueherngl@google.com>
Change-Id: I7aa7acf1f3c3cc14b92ded05d5868818a627a432
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Use the common driver to configure the GPIOs on the Delta Lake
platform as done for Tioga Pass in commit 89d2aa0. The GPIO
settings are dumped by inteltool with original UEFI firmware,
then use intelp2m to generate header file.
TEST=Dump GPIO settings by Intel ITP and check if match gpio.h.
Change-Id: I8005d4caa2d87b6831099bfec3a40246224f3cb5
Signed-off-by: Bryant Ou <Bryant.Ou.Q@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43548
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Create the eldrid variant of the volteer reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.1.1).
BUG=b:162115131
BRANCH=None
TEST=util/abuild/abuild -p none -t google/volteer -x -a
make sure the build includes GOOGLE_ELDRID
Signed-off-by: MiceLin <mice_lin@wistron.corp-partner.google.com>
Change-Id: I1cd07ee7a87335e1e0b51d65c26bffc3bc46037c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Because there was a lot of discussion about the size increase,
I also looked at the impact of calling the get_spi_bar() function
vs reading spi_base directly and just not worring about whether
or not spi_base was already set.
Using the spi_base variable directly is 77 bytes bytes for all 6
functions. it's roughly double the size to call the function at
153 bytes. This was almost entirely due to setting up a call stack.
If we add an assert into each function to make sure that the spi_base
variable is set, it doubles from the size of the function call to
333 bytes.
For my money, the function call is the best bet, because it not only
protects us from using spi_base before it's set, it also gets the
value for us (at least on x86, on the PSP, it still just dies.)
BUG=b:161366241
TEST: Build
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I0b0d005426ef90f09bf090789acb9d6383f17bd2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43772
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Mark that psp_verstage is running in userspace so that it won't run
the code in dcache_clean_all() and hang the system.
BUG=b:161554141
TEST=Run board through a bunch of recovery cycles.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I936dcec18a2be9ec8636ce77bb0954f4fc58153e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43785
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Neither the family 17h model 10-1Fh PPR nor the internal FSP source
seems to have the mapping of the USB OC pins to the four bit values, so
this is based on the information from the family 15h model 70-7Fh BKDG
which also corresponds to what I'd have expected here.
BUG=b:162010077
Change-Id: I581ef1d730e9d729d9849d7e73ef1c1b67b2c4cf
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43833
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Some smart battery patches have been backported to the ChromeOS 4.19 kernel,
and userspace can now access smart battery data from sysfs instead of using
the hacky ectool instead.
Also change all space indents into tab indents while we're here.
BUG=chromium:1047277
TEST=confirmed a /sys/class/power_supply/sbs-i2c device shows up
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I43687e63e4c1a7756c117129ced20749afc1b9e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43451
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Building depthcharge master currently fails as depthcharge commit 74ca8ae5
(depthcharge: Hide dev mode timeout description) changed the function signature
according to vboot commit 59fd331b (vboot/ui: pass timer_disabled to
vb2ex_display_ui()), which is not yet present in the vboot checkout:
$ make
[…]
CC drivers/ec/vboot_auxfw.depthcharge.o
src/drivers/ec/vboot_auxfw.c: In function 'display_firmware_sync_screen':
src/drivers/ec/vboot_auxfw.c:117:5: error: too many arguments to function 'vb2ex_display_ui'
vb2ex_display_ui(VB2_SCREEN_FIRMWARE_SYNC,
^~~~~~~~~~~~~~~~
In file included from /dev/shm/coreboot-1/3rdparty/vboot/firmware/include/vb2_api.h:18,
from src/drivers/ec/vboot_auxfw.c:17:
/dev/shm/coreboot-1/3rdparty/vboot/firmware/include/../2lib/include/2api.h:1262:13: note: declared here
vb2_error_t vb2ex_display_ui(enum vb2_screen screen,
^~~~~~~~~~~~~~~~
So update the submodule pointer from commit 68de90c7 (Allow building for
non-CrOS environments) to commit ed23c084 (Reset EC when transitioning to dev
mode).
This brings in 7 new commits.
Change-Id: Icd5408fb824fc5da470774b7f493b916dff17832
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43517
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Joel Kitching <kitching@google.com>
Invoke PCIe root port devicetree update to swap the enabled root port
devices with the disabled devices.
BUG=b:162046161
TEST=Ensure that the PCIe device 1c.7 corresponding to Root port 8 is
swapped with the PCIe device 1c.0 corresponding to Root port 1.
Change-Id: I7d422014a2f5cafc41296ce0a2c116c82aefb0d7
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43835
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use gpio_keys driver to add ACPI node for pen eject event. Also
setting gpio wake pin for wake events.
Removal and insertion (both edges) triggers IRQ and only removal is a
wake event (rising edge).
Adding for both Volteer and Volteer2 variants.
BUG=b:146083964
BRANCH=None
TEST=tested on a Volteer
Change-Id: Ida3217a5b156320856ce3302c2623eba2230f28d
Signed-off-by: Alex Levin <levinale@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43764
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Create the magolor variant of the waddledee reference board by
copying the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.1.1).
BUG=b:58540772
BRANCH=None
TEST=util/abuild/abuild -p none -t google/dedede -x -a
make sure the build includes GOOGLE_MAGOLOR
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Change-Id: I3e39e650b82a0aa629a48a00227700b058effb34
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43803
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
The lint-stable makefile target only watches for errors in the Kconfig
file, so has not protected additional "Naked" references to BOOL type
Kconfig symbols from entering the tree. Update it to an error so that
they can't continue coming into the codebase.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Icce2a9a627c4fbcaa220df18474cb8bfea8b2a8c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
In TGL SoC we have PCH and CPU side PCIe support. This patch
skips CPU side PCIe enablement in FSP if device is disabled in
devicetree. Disabling the initialization of CPU PCIe saves ~30ms
in FspSiliconInit!
BUG=b:158573805
BRANCH=None
TEST=Build and boot volteer and TGL RVP. Using cbmem tool measure the
boot time. FspSilicontInit time is reduced by ~30ms with this patch.
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Change-Id: I7e8512d22b1463bc4207f80b16dcfb5d00ef4b46
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42557
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If bit 7 of a PIRQ route is set, it is disabled. Modern OSes don't use
PIRQ routing, so we might as well zero the other bits for consistency.
Tested on Asrock B85M Pro4 with SeaBIOS 1.13.0, still boots.
Change-Id: I78980b9ea5e878a6200df0f6c18c5e7d06a7950a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43861
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enabling VT-d on pre-QS silicon may have issues like rendering the
Thunderbolt driver useless. This change will ensure that VT-d is
disabled for pre-QS silicon and enabled for QS.
BUG=b:152242800,161215918,158519322
TEST=Validated VT-d is disabled for pre-QS (cpu:0x806c0) and enabled for
QS (cpu:0x806c1). Kernel walks through ACPI tables. If VT-d is disabled
and no DMAR table exists, IOMMU will not be enabled.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I98a9f6df185002a4e68eaa910f867acd0b96ec2b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The following changes are done in this patch:
1. Get the CSE partition info containing version of CSE RW using
GET_BOOT_PARTITION_INFO HECI command
2. Get the me_rw.version from the currently selected RW slot.
3. If the versions from the above 2 locations don't match start the update
- If CSE's current boot partition is not RO, then
* Set the CSE's next boot partition to RO using SET_BOOT_PARTITION
HECI command.
* Send global reset command to reset the system.
- Enable HMRFPO (Host ME Region Flash Protection Override) operation
mode using HMRFPO_ENABLE HECI command
- Erase and Copy the CBFS CSE RW to CSE RW partition
- Set the CSE's next boot partition to RW using
SET_BOOT_PARTITION HECI command
- Trigger global reset
- The system should boot with the updated CSE RW partition.
TEST=Verified basic update flows on hatch and helios.
BUG=b:111330995
Change-Id: I12f6bba3324069d65edabaccd234006b0840e700
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35403
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The prompts for the DPTF Kconfig options were not necessary, they should
be selected based on what DPTF implementation is being used, ASL files
or generated at runtime. It's not really meant to be fiddled with at
build-time. Also rewrite the help text for the _HID selection, to try
and make it more clear when to use y or n.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I6edcabd28426916d9586d501b95b510dfc163fc1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43830
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This macro is not correct because the RX Level/Edge Configuration
(trig) and the GPIO Tx/Rx Buffer Disable (bufdis) fields in DW0
register do not affect on the pad in the native function mode.
This is part of the patch set
"src/mb/*, src/soc/intel/common/gpio: Remove PAD_CFG_NF_BUF_TRIG ":
CB:43455 - cedarisland: undo set trig and bufdis for NF pads
CB:43454 - tiogapass: undo set trig and bufdis for NF pads
CB:43561 - h110m: undo set trig and bufdis for NF pads
CB:43569 - soc/intel/common/gpio_defs: Remove PAD_CFG_NF_BUF_TRIG
Change-Id: Ic0416e3f67016c648f0886df73f585e8a08d4e92
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao
Reviewed-by: Michael Niewöhner
According to the documentation [1], RX Level/Edge Configuration (trig)
and GPIO Tx/Rx Buffer Disable (bufdis) [2] settings are not applicable
in native mode and BIOS does not need to configure them. Therefore,
there is no need to configure this in gpio.h using PAD_CFG_NF_BUF_TRIG
macros. Use PAD_CFG_NF instead and set this fields to 0.
[1] Intel document #549921
[2] Intel document #336067-007US
This is part of the patch set
"src/mb/*, src/soc/intel/common/gpio: Remove PAD_CFG_NF_BUF_TRIG ":
CB:43455 - cedarisland: undo set trig and bufdis for NF pads
CB:43454 - tiogapass: undo set trig and bufdis for NF pads
CB:43561 - h110m: undo set trig and bufdis for NF pads
CB:43569 - soc/intel/common/gpio_defs: Remove PAD_CFG_NF_BUF_TRIG
Change-Id: I6a6b745bdaacb1c4fbf032e4ce54cb25a72d790a
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43561
Reviewed-by: Michael Niewöhner
Reviewed-by: Lance Zhao
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
According to the documentation [1], RX Level/Edge Configuration (trig)
and GPIO Tx/Rx Buffer Disable (bufdis) [2] settings are not applicable
in native mode and BIOS does not need to configure them. Therefore,
there is no need to configure this in gpio.h using PAD_CFG_NF_BUF_TRIG
macros. Use PAD_CFG_NF instead and set these fields to 0.
[1] Intel document #549921
[2] Intel document #336067-007US
This is part of the patch set
"src/mb/*, src/soc/intel/common/gpio: Remove PAD_CFG_NF_BUF_TRIG ":
CB:43455 - cedarisland: undo set trig and bufdis for NF pads
CB:43454 - tiogapass: undo set trig and bufdis for NF pads
CB:43561 - h110m: undo set trig and bufdis for NF pads
CB:43569 - soc/intel/common/gpio_defs: Remove PAD_CFG_NF_BUF_TRIG
Change-Id: Icdb6cb39934548e125461929701b33477a74f2a2
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43454
Reviewed-by: Michael Niewöhner
Reviewed-by: Lance Zhao
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This effectively reverts commit 5086ccef
(mb/purism/librem_skl: Fix CLKREQ for 15v3 NVMe).
Some Librem 15v3/v4 boards are showing issues with NVMe detection or
booting via SeaBIOS, so revert this until a proper fix can be found.
Test: build / successfully boot Librem 15v4 with problematic NVMe drive.
Change-Id: I0659f77bbe693f3d3b192a28ff3ef013658930cc
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43490
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For devices sharing same firmware, there may be few customization based
on SKU ID - for example being clamshell or form factor. On Kukui and
Jacuzzi platforms the SKU ID is defined on AP SOC, so we have to send
the information to EC.
BUG=b:161767717
TEST=make -j # builds and boots on Juniper
BRANCH=kukui
Change-Id: I8ffdd9fd1e609c1dd4b0e22dc7aab560ccdc842e
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43788
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
HDMI DDC GPIOs were configured as NC till now in waddledoo.
This may cause HDMI i2c transfer to break and EDID read will
fail due to wrong configuration
Configuring these GPIOs as NF in coreboot to fix the issue.
BUG=b:160324327
BRANCH=None
TEST=HDMI works on DDI2 onn Type-C port
Change-Id: If02f062132d7c3b01b07ea9401e81f451df35c3c
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43294
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fix the scan-build warning below:
CC romstage/drivers/mrc_cache/mrc_cache.o
src/drivers/mrc_cache/mrc_cache.c:450:26: warning: Value stored to 'flash' during its initialization is never read
const struct spi_flash *flash = boot_device_spi_flash();
^~~~~ ~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
The function can return early before the value is read. Fix this, by
getting rid of the variable, as the value is only read once.
Change-Id: I3c94b123f4994eed9d7568b63971fd5b1d94bc09
Found-by: scan-build (clang-tools-9 1:9.0.1-12)
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42798
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Rename the pch_init function to bootblock_pch_init and romstage_pch_init
according to the stage it is defined in.
TEST=Able to build and boot Waddledoo successfully.
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: Iaa0a41f3b5972251d6cd9359bbb46d392196b2e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43479
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The outb() call is replaced with the post_code()
The post_codes.h is replaced with console.h since console.h
includes both the post_code definition and post_codes.h
Change-Id: I21345260e86de30614c416e2f509bd77b9e00cb7
Signed-off-by: Sindhoor Tilak <sindhoor@sin9yt.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43596
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The Kconfig lint tool checks for cases of the code using BOOL type
Kconfig options directly instead of with CONFIG() and will print out
warnings about it. It gets confused by these references in comments
and strings. To fix it so that it can find the real issues, just
update these as we would with real issues.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I5c37f0ee103721c97483d07a368c0b813e3f25c0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Implement type 19 by accumulating the DRAM dimm size found in cbmem's
CBMEM_ID_MEMINFO structure. This seems common on x86 where the
address space always starts at 0.
At least EDK2 uses this table in the UI and shows 0 MB DRAM if not
present.
Change-Id: Idee8b8cd0b155e14d62d4c12893ff01878ef3f1c
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Don't initialize fields with zeroes since gnvs structs were zeroed out
in southbridge already. Also add some comments.
See also these commits:
* Commit a76cf28 with Change-Id
I2ccf4699ba3ed3f5b9402c0340153d4a5bf82682 ("mb/lenovo/*/acpi_tables:
Don't initialize already initialized fields").
* Commit 0c52638 with Change-Id
I71f092ed7582b4931122d72f41d0b42a7569b96e ("mb/lenovo: Remove
thermal.h header").
Change-Id: I1a0042bc93a2b30babcb896b3df23faf37998f3c
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40479
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- Update MAINBOARD_PART_NUMBER for TGL variants
- MAINBOARD_PART_NUMBER is reported as FRID on acpi
- This is required for cros_config to differentiate
across TGL variants.
- Mosys uses cros_config to identify TGL variants using
data read from FRID
Bug=none
Test=build and boot coreboot on TGLRVP UP3 hardware
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: I11d4ab2a5b6ade6c50988a9fec4d9866fe79d7b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43620
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Set up a 8-byte I/O range at 0x290-0x297 as PIIX4's generic device 9,
which activates a chip select when this range is accessed.
On the P2B family it connects to the W83781D hardware monitor,
allowing access to it over the ISA bus, just like vendor firmware.
Apparently this does not work on p3b-f, but no ill effects observed
either.
TEST=On p2b-ls lm-sensors can detect chip and get readings over ISA.
Change-Id: Iaed1df7230359e94c580c305f4769c8bb4f5fce0
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41561
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Remove EIO define. It is unused and means something else,
elsewhere in the tree.
Move PMIOSE bit definition next to PMREGMISC, where it actually
belongs.
Correct a number of bit defines with glaring errors.
Clarify in comments which PM register defines are in PCI config
space are which are in I/O space.
Change-Id: Ic7f2267d013403c0a519c2ee1786bd3c7f5a9708
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41637
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The Embedded Firmware Structure contains various SPI parameters for
the PSP to program. This change adds support to amdfwtool for
populating these values as well specifying SOC Family and Model.
BUG=b:158755102
TEST=Read EFS values at appropriate offsets using a hex editor. Boot
test on Tremblye and Morphius.
Change-Id: I87c4d44183ca65a5570de5e0c7f9b44aa6dd82f9
Signed-off-by: Matt Papageorge <matt.papageorge@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42566
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Coverity detects dereferencing pointers that might be "NULL" when
calling acpigen_write_scope and acpigen_write_device. Add sanity
check for both of scope and name to prevent NULL pointer dereference.
Found-by: Coverity CID 1430454
TEST=Built and boot up to kernel on Volteer.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I8ece3831bbd2641ceafbd71b9dc3db7e04a8eae4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43449
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Previously, the spi base address code was using a number of different
functions in a way that didn't work for use on the PSP.
This patch consolidates all of that to a single saved value that gets
the LPC SPI base address by default on X86, and allows the PSP to set
it to a different value.
BUG=b:159811539
TEST=Build with following patch to set the SPI speed in psp_verstage.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I50d9de269bcb88fbf510056a6216e22a050cae6b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43307
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The while loop in \_SB.DPTF._OSC accidentally used <= instead of <, so
there was an error indexing into IDSP.
BUG=b:162043345
TEST=verify disassembled ASL, as well as no BIOS bug mentioned in
/var/log/messages
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I08c4152c59cc9eb13386c825aab983681cfa88ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43827
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
The only reason to use a named choice statement is if you plan on
having the choice statement in multiple places. Since none of these
are used in multiple places, we can get rid of the names.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ie5f84e9dc38050234976bd193ac5fbf649e564f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43765
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Missed one other scope operator in the DPTF cleanup. This one is for the
fan device, and without this fix, the kernel isn't able to properly
control the fan (it gets confused about whether it's ACPI 4+ compatible
or not).
BUG=b:149722146
TEST=verify /sys/class/thermal/cooling_zone0/max_state returns > 1,
and /sys/class/thermal/cooling_zone0/cur_state is writable, and writing
the value of `max_state` causes the fan to spin faster.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I7bd83967ace761ddd17eaeae9c25abb0b2cbe413
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43840
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
It's not related to spinlocks and the actual implementation
was also guarded by CONFIG(SMP).
With a single call-site in x86-specific code, empty stubs
for other arch are currently not necessary.
Also drop an unused included on a nearby line.
Change-Id: I00439e9c1d10c943ab5e404f5d687d316768fa16
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43808
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since FSP pre-populates the UPD struct with the non-zero default values,
coreboot shouldn't set them to zero in the case that they aren't
configured in the board's devicetree. Since all parameters being zero is
a valid case, this patch adds another devicetree option that applying
the devicetree settings for the USB2 PHY tuning depends on being set.
BUG=b:161923068
Change-Id: I66e5811ce64298b0644d2881420634a8ce1379d7
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43781
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reduces the differences between Bay Trail and Braswell, and avoids
unlikely but potential bugs regarding missing braces in macros.
Tested with BUILD_TIMELESS=1, Google Ninja remains identical.
Change-Id: Ic341fe70e7d6fb4751f2fefbdedbee5c90dd8d1f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43201
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
According to the documentation [1], RX Level/Edge Configuration (trig)
and GPIO Tx/Rx Buffer Disable (bufdis) [2] settings are not applicable
in native mode and BIOS does not need to configure them. Therefore,
there is no need to configure this in gpio.h using PAD_CFG_NF_BUF_TRIG
macros. Use PAD_CFG_NF instead and set this fields to 0.
[1] Intel document #549921
[2] Intel document #336067-007US
This is part of the patch set
"src/mb/*, src/soc/intel/common/gpio: Remove PAD_CFG_NF_BUF_TRIG ":
CB:43455 - cedarisland: undo set trig and bufdis for NF pads
CB:43454 - tiogapass: undo set trig and bufdis for NF pads
CB:43561 - h110m: undo set trig and bufdis for NF pads
CB:43569 - soc/intel/common/gpio_defs: Remove PAD_CFG_NF_BUF_TRIG
Change-Id: Ie3ee2eadc08826d49e8517c83ab6831398e3aa93
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43455
Reviewed-by: Michael Niewöhner
Reviewed-by: Lance Zhao
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reduces the differences between Bay Trail and Braswell, and
prevents possible bugs when using these macros.
Tested with BUILD_TIMELESS=1, Google Ninja remains identical.
Change-Id: I18e9a750901f1bf8d3b61f4b64bbed907bc1fa15
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43192
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This to silent a bug found using gcc-10.
src/northbridge/intel/ironlake/raminit.c: In function 'setup_heci_uma':
src/northbridge/intel/ironlake/raminit.c:1805:11: error: 'reply.command' may be used uninitialized in this function [-Werror=maybe-uninitialized]
1805 | if (reply.command != (MKHI_SET_UMA | (1 << 7)))
| ~~~~~^~~~~~~~
cc1: all warnings being treated as errors
Change-Id: I0d13de549b6d428ac3675ee3f91eb5e42aeb25e8
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42461
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- remove comments (except the GPIO group), because it does not contain
useful information that helps to understand the circuit, which we do
not have;
- remove empty lines between macros;
- use a shorter PAD_CFG_GPI_INT() macro instead of
PAD_CFG_GPI_TRIG_OWN() to set DRIVER mode.
Change-Id: Ia7111341aab6f400da70d936849e4d4c9406905b
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Converts bit field macros to target PAD_CFG_*() macros, which were
hidden in the comments. To do this, the following command was used:
./intelp2m -n -t 1 -p snr -file ../../src/mainboard/supermicro/
x11-lga1151-series/variants/x11ssm-f/include/variant/gpio.h
./intelp2m -n -t 1 -p snr -file ../../src/mainboard/supermicro/
x11-lga1151-series/variants/x11ssh-tf/include/variant/gpio.h
This is part of the patch set
"mb/supermicro/x11-lga1151: Rewrite pad config using intelp2m":
CB:42916 - 1/4 Decode raw register values
CB:42917 - 2/4 Exclude fields for PAD_CFG
CB:42918 - 3/4 Fixes some field macro
CB:35679 - 4/4 Convert field macros to PAD_CFG
Tested with BUILD_TIMELESS=1, Supermicro X11SSH-TF and X11SSM-F,
remains identical.
Change-Id: Idad7536854d4b1ae7dcf7934e81de438478fe059
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35679
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fixes some bit fields to convert to target macros PAD_CFG_*() macros.
This is part of the patch set
"mb/supermicro/x11-lga1151: Rewrite pad config using intelp2m":
CB:42916 - 1/4 Decode raw register values
CB:42917 - 2/4 Exclude fields for PAD_CFG
CB:42918 - 3/4 Fixes some field macro
CB:35679 - 4/4 Convert field macros to PAD_CFG
Change-Id: I291f5f0f34505c466b610aa4049c8cc35937d140
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42918
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch excludes bit fields that should be ignored [1] in order
to convert current macros to target PAD_CFG_*() macros. The following
commands were used for this:
./intelp2m -ii -fld cb -ign -t 1 -p snr -file ../../src/mainboard/
supermicro/x11-lga1151-series/variants/x11ssm-f/include/variant/gpio.h
/intelp2m -ii -fld cb -ign -t 1 -p snr -file ../../src/mainboard/
supermicro/x11-lga1151-series/variants/x11ssh-tf/include/variant/gpio.h
[1] ignore RX Level/Edge Configuration (bit 26:25) and RX/TX Buffer
Disable (bit 9:8) for the native function, because it does not
affect the pad in this mode.
This is part of the patch set
"mb/supermicro/x11-lga1151: Rewrite pad config using intelp2m":
CB:42916 - 1/4 Decode raw register values
CB:42917 - 2/4 Exclude fields for PAD_CFG
CB:42918 - 3/4 Fixes some field macro
CB:35679 - 4/4 Convert field macros to PAD_CFG
Change-Id: Icdf366a8d416598cec5afcb9a0fae6bf7ecd7ba0
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42917
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When refactoring, one can move code around quite a bit while preserving
reproducibility, unless there is an assert-style macro somewhere... As
these macros use __FILE__ and __LINE__, just moving them is enough to
change the resulting binary, making timeless builds rather useless.
To improve reproducibility, do not use __FILE__ nor __LINE__ inside the
assert-style macros. Instead, use hardcoded values. Plus, mention that
timeless builds lack such information in place of the file name, so that
grepping for the printed string directs one towards this commit. And for
the immutable line number, we can use 404: line number not found :-)
Change-Id: Id42d7121b6864759c042f8e4e438ee77a8ac0b41
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42196
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Use the intelp2m utility [1,2] with -fld=cb options to convert the pad
configuration format with the raw values of the DW0 and DW1 registers
to the format with the bit fields macros: PAD_FUNC(), PAD_RESET(),
PAD_TRIG(), PAD_BUF(), PAD_PULL(), etc... Also use the -ii options to
generate the target macro in the comments, so that it is easier to
understand what result we should get:
./intelp2m -ii -fld cb -t 1 -p snr -file ../../src/mainboard/supermicro/
x11-lga1151-series/variants/x11ssm-f/include/variant/gpio.h
./intelp2m -ii -fld cb -t 1 -p snr -file ../../src/mainboard/supermicro/
x11-lga1151-series/variants/x11ssh-tf/include/variant/gpio.h
[1] https://github.com/maxpoliak/pch-pads-parser
[2] https://review.coreboot.org/c/coreboot/+/35643
This is part of the patch set
"mb/supermicro/x11-lga1151: Rewrite pad config using intelp2m":
CB:42916 - 1/4 Decode raw register values
CB:42917 - 2/4 Exclude fields for PAD_CFG
CB:42918 - 3/4 Fixes some field macro
CB:35679 - 4/4 Convert field macros to PAD_CFG
Tested with BUILD_TIMELESS=1, Supermicro X11SSH-TF and X11SSM-F,
remains identical.
Change-Id: I209ecdca75a0e62233d3726942c75ea06acc40a2
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42916
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since the bufdis parameter (bit 9:8 in Pad Configuration DW0 register)
does not affect the pad in native function mode,
PAD_CFG_NF_BUF_IOSSTATE_IOSTERM() macro is not required to configure
the pad. This macro has not been used, so deleting it will not affect
anything.
Change-Id: Icce6f130308dbe7032b99539f73688bae8ac17e0
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42913
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
IO Standby State can use various settings independently of
PAD_CFG_GPI_TRIG_OWN (). Instead, use other existing macros to set this
parameter:
- PAD_CFG_GPI_IOSSTATE_TRIG_OWN()
- PAD_CFG_GPI_TRIG_IOS_OWN()
Change-Id: I0f5fbd79f892981eb4534f50ac96a7d0c190f59e
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42912
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The patch updates existing macros for the GPI:
- PAD_CFG_GPI_IOSSTATE_IOSTERM()
- PAD_CFG_GPI_IOSSTATE()
to allow the user to set the RX Level/Edge Configuration (trig) and
the Host Software Ownership (own) fields in addition to IO Standby State
(iosstate) and IO Standby Termination (iosterm) in the pad configuration
using these macros.
Change-Id: I8a70a366e816d31720d341a5d26880dc32ff9b8d
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42911
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner
Gate the A-Link to AHB Bridge clocks to save power. These
are internal clocks and are unneeded for Raven/Picasso.
This was previously performed within the AGESA FSP but this
change relocates it into coreboot.
BUG=b:154144239
TEST=Check AL2AHB clock gate bits at the end of POST before and
after change with HDT.
Change-Id: Ifcbc144a8769f8ea440cdd560bab146bf5058cf9
Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
With the updated FSP UPD headers there are enough DXIO descriptor slots
in the UPD, so we can now add asserts to make sure that the mainboard
doesn't pass more DXIO/DDI descriptors than the UPD has slots for. This
is part of the DXIO/DDI descriptor handling cleanup.
BUG=b:158695393
Change-Id: Ia220d5a9d4ff11707b795b04662ff7eead4e2888
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43435
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
A new version of UPD headers generated from the FSP tree. This adds UPDs
for downcoring and increases the number of DXIO descriptor slots.
BUG=b:161152720
TEST=SATA on Mandolin works now.
Cq-Depend: chrome-internal:3175393
Change-Id: I1e27597e22af4df65d206a38b67c4920298b30b2
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43659
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use macros to configure each of the IIO ports instead of an array
of some unknown parameters. This will clean up the code and make
it easier to read.
Tested with BUILD_TIMELESS=1, Tioga Pass, remains identical.
Change-Id: I2911992435a6c93624525426d56212f821abb866
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43502
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When RTC failure is detected, send IPMI OEM command to issue CMOS clear.
This is to let the payload (LinuxBoot) handle the IPMI OEM CMOS
clear command by resetting RTC data, erasing RW_VPD (TODO) and add a
SEL, then reboot the system.
Tested=on OCP Delta Lake, after removing RTC battery we can see the above
flow can be executed correctly.
Signed-off-by: Jingle Hsu <jingle_hsu@wiwynn.com>
Change-Id: I27428c02e99040754e15e07782ec1ad8524def2f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43005
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
1. Populate SMBIOS data from OCP_DMI driver read from FRU
2. Set the read PPIN MSR for CPU0 and CPU1 to BMC, selecting
PARALLEL_MP_AP_WORK to enable OCP DMI driver to read remote socket PPIN.
Tested on OCP Tioga Pass.
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Change-Id: Ie11ab68267438ea9c669c809985c0c2d7578280e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40524
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Raydium ACPI entry currently provides a reset GPIO and an _ON/_OFF
method to the kernel. These are contradictory. The ownership of the GPIO
should be mutually exclusive between either the OS or the FW. Since we
have two methods exposed this causes the OS to reset the TS twice. Once
using the _ON method, and once using the GPIO. Additionally the _ON
method is waiting for 20ms after reset while the OS driver uses a 50ms
delay. The Raydium TS datasheet specifies 20ms for FW ready time, so the
OS driver is adding additional padding.
The reference design has a 32ms rise time on the reset line. So without
this patch, the OS tries to reset the TS using the _ON method and it
waits for 20ms. This is not enough time for the reset line to reach
high, let alone account for the FW ready time. The OS driver then tries
to reset the device by toggling the GPIO. It waits 50ms which is still
2ms less than required.
This CL removes the GPIO from being exported in the _CRS so the OS
driver won't try and reset the device. It also increases the reset delay
by 32ms to account for the rise time.
This isn't a complete fix. I think that the slow rise time is causing
some kind of metastability in the TS reset hardware. Using a script to
bind and unbind the TS driver, the TS device becomes unresponsive after
~200 iterations. The only way to reset the device is to power cycle.
The TS power is also not currently controlled by the power resource.
This means that we have no guarantee over when the reset line is
toggled. This will lead to issues while spending and resuming.
BUG=b:160854397
TEST=Boot trembyle and make sure TS works. Suspend/Resume trembyle 300+
times.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I23131be5d7109eed660a8bd6e2c156c015aa3c4e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43467
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Earlier versions of Dalboz did not correctly handle HS400. One fix was
to add stitching vias, but these boards did not have them. b/156539551
Another possible fix is to add tuning parameters including drive
strength, but that is still a WIP. b/158959725
This should correct OS load failures in the meantime by running the bus
slower.
BUG=b:158845662
TEST=build, flash, boot sku 0x5a80000c to OS
BRANCH=None
Signed-off-by: Eric Peers <epeers@google.com>
Change-Id: Ia3e7a641bde04c5a7be29bf91c38dd8c110ed17a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43572
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Create the dirinboz variant of the dalboz reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.1.1).
BUG=b:161579679
BRANCH=master
TEST=util/abuild/abuild -p none -t google/zork -x -a
make sure the build includes GOOGLE_DIRINBOZ
Change-Id: I33c03080ffbe0bca61acf4144417b9f5fff6389f
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43601
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reset the Touchscreen (TS) and disable the stop GPIO (report switch) at
the same time. Add a delay of 100 ms after disabling the stop GPIO. This
will ensure the required delay is inserted for both reset and stop
disable GPIOs simultaneously.
BUG=b:152936541
TEST=Build and boot the waddledoo mainboard. Ensure that the SiS
Touchscreen is functional.
Change-Id: Icbfb5e07a28ab72b1ff696ad1183a6c2173dcaac
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43453
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Marco Chen <marcochen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change does the following:
a. USI_REPORT_EN is no longer set to high in coreboot. Instead
GPIO_144 is exposed as stop_gpio in ACPI to allow OS to control this
pad as required.
b. Appropriate delays are added for power-down sequencing:
- Delay after REPORT_EN is disabled - 1ms
- Delay after RESET is asserted - 1ms
BUG=b:159501288
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: If4d12fa0d4f4e5123d8fdccdabda996dcafa4523
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change configures all missing pads in ramstage for dalboz
reference. This ensures that the state of all pads is set correctly
for the payload/OS. Also, all the pads for the platform are configured
in baseboard gpio table in ramstage to ensure that variants can
override any pads if required.
BUG=b:154351731
Change-Id: Ia30da908d3827177a7b3594ffba38bff81018ab9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change configures all missing pads in ramstage for trembyle
reference. This ensures that the state of all pads is set correctly
for the payload/OS. Also, all the pads for the platform are configured
in baseboard gpio table in ramstage to ensure that variants can
override any pads if required.
BUG=b:154351731
Change-Id: Idd827b6a4f995546493596f22249f8699bdf526b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add function to send POST start command to BMC. This function is
used in romstage and the POST end command will be sent in u-root.
TEST=Read POST command log in OpenBMC,
if command received successfully, message may show as below,
root@bmc-oob:~# cat /var/log/messages |grep -i "POST"
2020 Jul 15 16:36:11 bmc-oob. user.info fby3-v2020.23.1:
ipmid: POST Start Event for Payload#2
root@bmc-oob:~#
Signed-off-by: TimChu <Tim.Chu@quantatw.com>
Change-Id: Ide0e2a52876db555ed8b5e919215e85731fd80ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41605
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
SystemMemoryMapHob is necessary for SMBIOS type 17 among other things.
It is a fairly large structure, so the pointer to the data instead of
the structure itself, is included in the HOB. Use pointer to
SystemMemoryMapHob structure to interpret SystemMemoryHob HOB body.
Adjust the structure definition to match with CPX-SP ww28 release.
Display more fields to ensure the structure definition is correct.
TEST=Boot DeltaLake server, and check field values of SystemMemoryMapHob
to make sure they are correct:
0x7590a090, 0x00000020 bytes: HOB_TYPE_GUID_EXTENSION
f8870015-6994-4b98-95a2bd56da91c07f: FSP_SYSTEM_MEMORYMAP_HOB_GUID
================== MEMORY MAP HOB DATA ==================
hob: 0x777f7000, structure size: 0x6c88
lowMemBase: 0x0, lowMemSize: 0x20, highMemBase: 0x40, highMemSize: 0x5d0
memSize: 0x600, memFreq: 0xb76
NumChPerMC: 3
SystemMemoryMapElement Entries: 2, entry size: 16
memory_map 0 BaseAddress: 0x0, ElementSize: 0x20, Type: 0x1
memory_map 1 BaseAddress: 0x40, ElementSize: 0x5d0, Type: 0x1
BiosFisVersion: 0x0
MmiohBase: 0x80000
0x777f7000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
...
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I271bcbd6030276b8fcd99d5b4f2c93f034dd9b52
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43336
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a function draw_line() to draw either a horizontal or vertical line
segment.
Theoretically a horizontal line can also be drawn by calling
draw_rounded_box() with dim_rel.x being the line length and dim_rel.y
being the line width. However, due to the truncation in integer division
when converting relative coordinates to absolute ones, this will
potentially produce inconsistent line widths, depending on the value of
pos_rel.y.
It is guaranteed that draw_line() will produce consistent line widths,
regardless of the position of the line. Also, when the thickness
argument is zero, this function is able to draw a line with 1-pixel
width, which is not achievable by draw_rounded_box().
BRANCH=puff
BUG=b:146399181, b:161424726
TEST=emerge-puff libpayload
Change-Id: I2d50414c4bfed343516197da9bb50791c89ba4c2
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43508
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Joel Kitching <kitching@google.com>
This patch enables the SkipCpuReplacementCheck config for jasperlake rvp
to avoid the forced MRC training with the soldered down SOC.
BUG=b:160201335
BRANCH=None
TEST=Build and verify on jasperlake rvp with CSE Lite SKU.
Cq-Depend: chrome-internal:3142530
Change-Id: I40fb9a25170e8db3c63a71428ba459160a918961
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43146
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patches enables the SkipCpuReplacementCheck config for
the dedede baseboard to avoid the forced MRC training for all
its variants with the soldered down SOC.
BUG=b:160201335
TEST=Build and verify CSE Lite SKU on Waddledoo.
Cq-Depend: chrome-internal:3142530
Change-Id: I611e66f74a3b9b090ab5e0d836231643d3f919dc
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42930
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Add SkipCpuReplacementCheck config to control the FSPM UPD used
for skipping the CPU replacementment check to avoid the forced
MRC training for the platforms with soldered down SOC.
BUG=b:160201335
TEST=Build and verify CSE Lite SKU on Waddleddo.
Cq-Depend: chrome-internal:3142530
Change-Id: I63fcdab3686322406cf7c24fc26cbb535cc58c8d
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42453
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
A recent Coverity scan found an issue with the way the
EC_HOST_EVENT_MASK macro was being used. It was being passed values
between 0 and 63, but since it is doing basically (1ULL << (value - 1)),
this caused a shift of -1 when `i` is 0 and also doesn't reach the 63rd
bit of the mask. This is fixed by incrementing the start and end
conditions of the loop by 1, so the event mask ranges from bits 0 to 63,
instead of -1 to 62.
Found-by: Coverity CID 1430218
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I6a7cfa64545f3d313de24407f0a91b48368f2a8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43460
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Change PCH power policy. Set default of
POWER_STATE_DEFAULT_ON_AFTER_FAILURE to n in order to change power
state to S5 when power is reapplied after power failure.
TEST=Base on CB:42289, CB:43338 and build for Deltalake.
The following Kconfig options must be selected:
select SOC_INTEL_COMMON_BLOCK_PMC
select ACPI_INTEL_HARDWARE_SLEEP_VALUES
select CPU_INTEL_COMMON_SMM
Boot the system and check the last bit of GEN_PMCON_B is set to 1
through ITP with command: pch.pm_dump
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I4d4f14bdfc18740976171fd5d369b2d79a916dc4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42976
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
1. Read VPD variable 'fsp_log_level' to decide FSP log level.
2. Define the default values when the VPD variables cannot be found,
put all the values to vpd.h for better documentation and maintenance.
Tested=On OCP DeltaLake, the fsp_log_level can be changed from the VPD variable.
Change-Id: I44cd59ed0c942c31aaf95ed0c8ac78eb7d661123
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43606
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The three mainboards using this southbridge are desktop boards, which
are not dockable. The Dell Precision M6400 laptop is dockable, but even
though it has an Eaglelake MCH, it uses an i82801ix southbridge instead.
So, one could still port that laptop to coreboot after this change! :P
Also, drop the now-unnecessary `chip` and `dev` variables.
Change-Id: Ic9ab497c91d66032929190cde22d59a208887f50
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
There are more Jacuzzi followers coming and we want to have a simplified
way of adding new boards. Now, detachable and tablets should select
BOARD_GOOGLE_KUKUI_COMMON and clamshells should select
BOARD_GOOGLE_JACUZZI_COMMON.
BUG=None
TEST=make menuconfig; make -j # for kukui, krane, jacuzzi, juniper
BRANCH=kukui
Change-Id: Ifc1eb6a3792f46c5db6b5346902f1114955b28ae
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43436
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Jenkins does not build `config.stm` because the file name lacks the
mainboard name. So, the code was not being build-tested, and it does not
build because several files lacked the definition for `bool`.
Add the missing #include directives. Renaming the config file so that
Jenkins build-tests it is done in a follow-up.
Change-Id: Idf012b7ace0648027ef6e901d821ca6682cee198
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43622
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Eugene Myers <cedarhouse1@comcast.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- CPU: only tested with a Xeon E3-1220 (Sandy Bridge)
- RAM: native raminit tested (4G+4G, 8G+8G)
- USB: both chipset and ASMedia USB3 work, tested in SeaBIOS and Linux (5.4)
- LAN: tested in Linux
- SATA: all 4 ports work, tested in SeaBIOS and Linux
- iGPU: I can't test it as I only have a Xeon for this socket
- PEG: tested with an nVidia GT210, initialized by SeaBIOS
- PS2 keyboard and mouse combo port: no devices to test with
- Front panel header: tested, works
- Audio: tested, works
- Diagnostic LEDs: TBD
Change-Id: I9fd3c0b148b694fcb8e728cc17f0bd45eb5af9f2
Signed-off-by: Mate Kukri <kukri.mate@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43165
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
While it looks different, the early SMBus code for this southbridge is
still the same. In addition, this code was not checking the vendor ID
before. It is assumed that adding this check does not pose a problem.
Change-Id: I95ae4db399ce5592cefca82fa75f349220023b8c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42006
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The early SMBus code for this southbridge checked if the PCI device ID
is valid. However, we can't easily do that in common code, and we should
not attempt to do so either: if a SMBus device behaves differently, then
it should not be using the common code anyway.
Since this southbridge is used with two different northbridges, we need
to update both of them. Plus, x4x raminit no longer needs to know which
southbridge it is paired with, since both i82801gx and i82801jx use the
common early SMBus code, so we drop some preprocessor around includes.
Change-Id: Ic60a3f89bda6000fbe646461f05240c1b09db6e9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42005
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The early SMBus code for this southbridge checked if the PCI device ID
is valid. However, we can't easily do that in common code, and we should
not attempt to do so either: if a SMBus device behaves differently, then
it should not be using the common code anyway.
Change-Id: I5c21e091e437d23a173ddcf35d4f1efada6194cb
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42004
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We will update the other platforms to use this common code in
susbsequent commits. While we are at it, reflow a broken line,
define the SMBus PCI device in the header and fix whitespace.
Change-Id: I1fdff2feead4165f02b24cb948d8c03318969014
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41999
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The description for L0 and L1 was missed in the datasheet, however,
configuration registers for these pads are present. In addition, the
chipset contains the "GPP_L0/CSME_INTR_IN" and "GPP_L1/CSME_INTR_OUT"
pads in a circuit diagram. Use all available information to add a
description for the missed pads.
Change-Id: I7a0488c26b3df9de1adc037d94ae290837d65dd8
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40044
Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With commit 287cf6c7d1 (lp/drivers/usb: Work around QEMU XHCI
register issue) we restructured our capability register accesses
because the compiler used the wrong access size. While we do use
only 32-bit types now, a compiler may still try to be clever and
optimize things in unexpected ways. So we add an explicit read32()
now.
For instance for the 8-bit MaxPorts field, in the most significant
bits of `capreg + 4`, our read + mask + shift
((cap)->hciparams1 & 0xff000000) >> 24
was turned into a single 8-bit read instruction by GCC on x86:
31: 0f b6 52 07 movzbl 0x7(%edx),%edx
Change-Id: I76accd0ef718e70ca46807eb06a9177c3afd99f1
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43575
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Unconditionally selecting `GFX_GMA_IGNORE_PRESENCE_STRAPS` creates a
hard dependency on `MAINBOARD_USE_LIBGFXINIT`, which is undesired. Move
it out of the `if GFX_GMA` block to break this unwanted dependency.
TEST=Build for Librem 13v4 with no graphics init successfully.
Change-Id: I53e132c209c065068f20959fa1a6f5195f5fe766
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43491
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This change drops internal pulls for dalboz reference configured on pads
which already have external pull-ups in hardware.
GPIO_0(PWR_BTN_L): Pulled up to PP3300_A
GPIO_2(WAKE_L): Pulled up to PP3300_A
GPIO_10: Unused. Changed to PAD_NC.
GPIO_11(EC_IN_RW_OD): Pulled up to PP3300_A
GPIO_12(USI_INT_ODL): Pulled up to PP3300_A
GPIO_16(USB_OC0_L): Pulled up to PP3300_A
GPIO_17(USB_OC1_L): Pulled up to PP3300_A
GPIO_21(EMMC_CMD): Pulled up to PP1800_S0
GPIO_22(EC_FCH_SCI_ODL): Pulled up to PP3300_A
GPIO_31(EC_AP_INT_ODL): Pulled up to PP1800_A
GPIO_32: Unused. Changed to PAD_NC.
GPIO_113(I2C2_SCL): Pulled up to PP3300_S0
GPIO_114(I2C2_SDA): Pulled up to PP3300_S0
GPIO_129(KBRST_L): Pulled up to PP1800_S0
GPIO_92(CLK_REQ0_L): Pulled up to PP3300_S0
GPIO_115(CLK_REQ1_L): Pulled up to PP3300_S0
GPIO_116(CLK_REQ2_L): Pulled up to PP3300_S0
BUG=b:154351731
Change-Id: I62e9dbac7a55efa1e055983a7c126168ee516151
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change drops internal pulls for trembyle reference configured on pads
which already have external pull-ups in hardware.
GPIO_0(PWR_BTN_L): Pulled up to PP3300_A
GPIO_2(WAKE_L): Pulled up to PP3300_A
GPIO_10: Unused. Changed to PAD_NC.
GPIO_12(USI_INT_ODL): Pulled up to PP3300_A
GPIO_16(USB_OC0_L): Pulled up to PP3300_A
GPIO_17(USB_OC1_L): Pulled up to PP3300_A
GPIO_21(EMMC_CMD): Pulled up to PP3300_A
GPIO_22(EC_FCH_SCI_ODL): Pulled up to PP3300_A
GPIO_31(EC_AP_INT_ODL): Pulled up to PP1800_A
GPIO_90: Unused. Changed to PAD_NC.
GPIO_113(I2C2_SCL): Pulled up to PP3300_S0
GPIO_114(I2C2_SDA): Pulled up to PP3300_S0
GPIO_129(KBRST_L): Pulled up to PP1800_S0
GPIO_130(EC_IN_RW_OD): Pulled up to PP3300_S0
GPIO_92(CLK_REQ0_L): Pulled up to PP3300_S0
GPIO_115(CLK_REQ1_L): Pulled up to PP3300_S0
GPIO_132(CLK_REQ4_L): Pulled up to PP3300_S0
BUG=b:154351731
Change-Id: Id84b801e019eede7ef543c24aac968f3ef99b3fd
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43526
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
According to the ACPI specification, version 6.3:
Accesses to the PM1 status registers are done through byte or word
accesses.
The same is said about the PM1 Enable registers. Therefore, reporting
dword-sized access is wrong and means nothing anyway. Since some other
platforms use word-sized access, use word everywhere for consistency.
Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of
the patch train, both operating systems are able to boot successfully.
Change-Id: I6f85c9a4126f37ab2a193c3ab50a6c8e62cf6515
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43432
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
All supported x86 chips select HAVE_CF9_RESET, and also use 0xcf9 as
reset register in FADT. How unsurprising. We might as well use that
information to automatically fill in the FADT accordingly. So, do it.
To avoid having x86-specific code under arch-agnostic `acpi/`, create a
new optional `arch_fill_fadt` function, and override it for x86 systems.
Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of
the patch train, both operating systems are able to boot successfully.
Change-Id: Ib436b04aafd66c3ddfa205b870c1e95afb3e846d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
They are ignored if the ACPI_FADT_WBINVD flag is set, which is required
on current ACPI versions and only maintained for ACPI 1.0 compatibility.
Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of
the patch train, both operating systems are able to boot successfully.
Change-Id: Ief1219542ba71d18153b64180e0ff60bd1e7687b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Looks like some preparation is needed before reset. However, Picasso
also needs some special handling and still selects this option without
selecting HAVE_CF9_RESET_PREPARE. So, just add HAVE_CF9_RESET for now.
Change-Id: I0c6da9a43a28dbee916fd6bda9ae380ebd619edf
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43388
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Instead, just flip the desired bits using bitwise operations. As this is
initially zero, the resulting value is the same. This allows flags to be
set from anywhere regardless of execution order.
Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of
the patch train, both operating systems are able to boot successfully.
Change-Id: Icfd580a20524936cd0adac574331b09fb2aea925
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43387
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Both `acpi_fill_fadt` and `soc_fill_fadt` set many FADT fields. Since
the latter runs later, the values programmed in it overwrite any other
values. Drop unused assignments and consolidate everything in a single
function. Use `acpi_fill_fadt` as it is mandatory (no weak definition).
Change-Id: Ia8248f20dae2b93426f309605bb2076592b08df4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43386
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
According to Intel Order Number 290562 (PIIX4 datasheet), 0xcf9 is the
reset register, and setting bits 1 and 2 will result in a hard reset.
Change-Id: Id5ada6a10b2269d51908c6a5fd7745ef6c33a29a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43385
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The PM2_CNT register block is not present on this southbridge, as per
Intel Document 290744 (ICH4 datasheet). Also, the ACPI specification,
version 6.3, section 4.8.1.3 (PM2 Control Register), says:
This register block is optional, if not supported its block pointer and
length contain a value of zero.
Since the FADT struct defaults to zero in coreboot, we don't need to do
anything to indicate PM2_CNT is not supported. So, drop unneeded values.
Also delete a comment about `pm2_cnt_len`, which said that the right
value differs from zero. Looks like that comment was wrong instead.
Change-Id: Icbb32f5db7b368c764b3477c40f8ae9c788df5ee
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43383
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The PM2_CNT register block is not present on this southbridge, according
to comments on the code. As per the ACPI specification, version 6.3,
section 4.8.1.3 (PM2 Control Register):
This register block is optional, if not supported its block pointer and
length contain a value of zero.
Since the FADT struct defaults to zero in coreboot, we don't need to do
anything to indicate PM2_CNT is not supported. So, drop unneeded values.
Change-Id: Ib3ff0fd9e0725f61c38e60ba56b95e6e77b0b1ed
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43382
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The PM2_CNT register block is no longer needed, as explained in some
comments. While they may have been copy-pasted around a lot, they are at
least true for Hudson, and it makes sense to assume that they are true
for newer chipsets as well. As per the ACPI specification, version 6.3,
section 4.8.1.3 (PM2 Control Register):
This register block is optional, if not supported its block pointer and
length contain a value of zero.
Since the FADT struct defaults to zero in coreboot, we don't need to do
anything to indicate PM2_CNT is not supported. So, drop unneeded values.
Change-Id: Iabc7985c84aabe40ad98fdc9fc6ccbbab0a516c1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43381
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
None of the currently-supported chips has PM1b_EVT nor PM1b_CNT event
register blocks. According to the ACPI specification, version 6.3,
sections 4.8.1.1 and 4.8.1.2 (PM1 Event/Control Registers):
If the PM1b_EVT_BLK is not supported, its pointer contains a value of
zero in the FADT.
If the PM1b_CNT_BLK is not supported, its pointer contains a value of
zero in the FADT.
Since the FADT struct defaults to zero in coreboot, we don't need to do
anything with PM1b for now. So, drop unneeded writes to PM1b fields.
Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of
the patch train, both operating systems are able to boot successfully.
Change-Id: Iff788b2ff17ba190a8dd9b0b540f1ef059a1a0ea
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43380
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
None of the currently-supported chips has a GPE1 block. The ACPI spec,
version 6.3, section 4.8.1.6 (General-Purpose Event Registers) says:
If a generic register block is not supported then its respective
block pointer and block length values in the FADT table contain zeros.
Since the FADT struct defaults to zero in coreboot, we don't need to do
anything with GPE1 for now. So, drop the unneeded writes to GPE1 fields.
Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of
the patch train, both operating systems are able to boot successfully.
Change-Id: Iefc4bbc6e16fac12e0a9324d5a50b20aad59a6cd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43379
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add configs for USB 3.1 Gen2 EV settings so that people can set the
EV settings per board in device tree.
BUG=b:150515720
BRANCH=none
TEST=build coreboot and fsp with enabled fw_debug.
Flashed to puff and checked the log.
All usb configs were set correctly.
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Change-Id: Id4860665619095139c329565d433d9eb495cac02
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39448
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Now that libgfxinit has been fixed, trying to enable the Analog port no
longer hangs the system, nor fills the monitor with unreadable garbage.
Tested with linear framebuffer, displays correctly on a 1920x1080 VGA
monitor. Scaling also works when a smaller HDMI monitor is connected as
well. Legacy VGA text mode is also functional on either monitor, too.
Change-Id: Ie2f88edcb7ed1984adebf2af23195767af13654c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43560
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This brings in 4 new commits:
* c0db994 common/Makefile.inc: Factor out generation TLAs
* 3f86b0b Move `PSR_Off` out of `Power_And_Clocks_Haswell`
* 450c24c haswell: Make VGA on FDI work
* 3318bf2 Drop generation suffix from `Power_And_Clocks`
Change-Id: I023b0c2bb403b3a9c9fe575a78cd2cf2f20b112a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43559
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The DPTF._OSC method incorrectly assumed that all available UUIDs would
be present in the IDSP package, but this is not always the case. Instead
of matching an incoming UUID against an index into IDSP, search the IDSP
package for the matching UUID.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I718b6abe09152647b14f7c1405b2d0d20035726b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43531
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
The previous DPTF patch train missed the proper scope operator around
all of the TSR options. Without this, the optional GTSH and/or _STR
Methods end up in the wrong scope.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I9298c442c047c5f7f606574d900057a7c004b47f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43458
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In the initial DPTF refactor, the scope of the TCPU device was
incorrectly set as \_SB, instead of \_SB.PCI0. However, because of the
way that the acpi_inject_dsdt() callback currently works (it injects
contents before the dsdt.aml file), the Scope where the TCPU
device lives (\_SB.PCI0) doesn't exist yet. Therefore, to avoid playing
games with *when* things are defined in the DSDT, switch to defining all
of the DPTF devices in the SSDT.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ia4922b4dc6544d79d44d39e6ad18c6ab9fee0fd7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43529
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
While the DPTF refactor was in progress, TSR3 was added to volteer's
dptf.asl file, and I forgot to update the devicetree with TSR3 as well.
Also missed a swap in the passive policies of TSR0 and TSR1. This patch
fixes those.
BUG=b:149722146
TEST=boot volteer, dump SSDT & DSDT, verify TSR3._STA returns 0xF
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I71bc798492ec45bb1e2f8d779e6829db52ef4499
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Deepika Punyamurtula <deepika.punyamurtula@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Vilboz requires a different HID than rest of the zork variants. Hence,
this change sets the HID to AMDI1015 for I2S machine device in vilboz
overridetree.cb.
BUG=b:157708581
Change-Id: Ibae343f21cf8f0c782dc8a461f69172bf0da7eba
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43545
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change switches zork devices to use the newly added
i2s_machine_dev driver in devicetree rather than passing
dmic_select_gpio in SoC config.
BUG=b:157708581
Change-Id: I76c633694cbfb454c081ab2a4af4765bfbbae16b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change adds a new driver for AMD I2S machine device. Currently,
this device is added as part of `acp_fill_ssdt()` in Picasso, but with
addition of this driver, this device can be added just like any other
device in the devicetree.
BUG=b:157708581
Change-Id: I49d1a867d7941397acca1054632b6ad855a021de
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43541
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change increases the maximum length of device path string to 40
characters to accommodate growing hierarchy of devices.
TEST=Ensured that "\_SB.PCI0.LPCB.EC0.CREC.TUN0.RT58" is correctly
added to SSDT.
Change-Id: Id2ef71a32b26e366b56c652942a247de4889544a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43540
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change drops _INI and OSFL methods under \_SB since they are not doing
anything useful. _INI only calls OSFL and OSFL initializes OSVR if not
already initialized and returns OSVR value. However, OSVR is not used
anywhere and hence both these functions can be dropped.
BUG=b:153879530
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I4f3e1c93a855006cc115087fded20bfb76c1133e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43515
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Global variable `PMOD` that stores the interrupt mode used by OS is
required by all mainboards. This change moves the variable definition to
globalnvs.asl under picasso.
Additionally, ACPI spec says that BIOS should assume interrupt mode as PIC
until _PIC() method is called by OS. Thus, this change also updates the
default value of PMOD as 0 i.e. PIC mode.
BUG=b:153879530
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I731c03d965882281a7a23f55894451210ba72274
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43514
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GPIO_9 is associated with gevent 22. Correct all the misconfigurations
and use macros for clarity as to what bit offset is being used instead
of open coding things.
BUG=b:161205804
Change-Id: Ic4cfd62763d72d12a55f89585f24e07df6af0f4f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43516
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently, the code and data in psp_verstage is ~59K. Adding the code
to save vbnv to the SPI rom increases that to 66K.
Getting rid of VERSTAGE_SIZE allows verstage to grow as it needs to.
BUG=b:161366241
TEST=Build & Boot Morphius with VBOOT_VBNV_CMOS_BACKUP_TO_FLASH enabled
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: Ic6853b70073f9e781fc10402a2a47c9c8e0d49d3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43486
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Extend the local APIC timer delay so that it can be started,
and waited for, independently.
Add an EOI so that more than one APIC timer interrupt is possible.
Previous to this, because there was no EOI, the first timer
interrupt the CPU took was also the last it would take --
apic_delay would only work one time.
Change-Id: Ib11aeee5b7da81287166ac68fc327e7ae62d1b84
Signed-off-by: Ronald G Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
On zork, bootblock is part of RW firmware in non-recovery mode, so PCIe
GPIOs can be configured early on in bootblock rather than waiting until
romstage. This change moves the call to variant_pcie_gpio_configure() to
happen in bootblock and drops romstage.c file.
BUG=b:154351731
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ic515304f35fe5623d58d6000efcb11fb9039e137
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43476
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
gpio_set_stage_rom table is now configuring only PCIe related GPIOs in
romstage. This change moves the configuration of PCIe related GPIOs to
variant_pcie_gpio_configure() to keep all the configuration for WiFi and
non-WiFi PCIe pads in one place. It also drops the function
variant_romstage_gpio_table() as it is unused.
BUG=b:154351731
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ib1c41ba141dce6b52b6e0a250a3aa07c296068aa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43475
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Now that the power and reset GPIO configuration for non-PCIe devices is
dropped from romstage GPIO table, the tables for pre-v3 and v3 version of
schematics are exactly same. So, this change drops the duplicate table and
also removes the check for v3 schematics when configuring the pads in
romstage.
BUG=b:154351731
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I67ca9f587c3f47912393ebaf38badcc9d76cc393
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Currently the common soc code automatically selects
POWER_STATE_DEFAULT_ON_AFTER_FAILURE which making other mainboard
options unselectable.
However, there're some cases that power state should change to different
states after reapplying power.
Make POWER_STATE_DEFAULT_ON_AFTER_FAILURE default y but do not select it
in soc code so that we can disable it and select other options in the
mainboard code.
Tested on OCP Delta Lake.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: Ifa853d81ee9477d2440ceaa67b2bd6b863ee52c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43338
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Implement sending POST start/end command to BMC.
TEST=Read POST command log in OpenBMC,
if command received successfully, message may show as below,
root@bmc-oob:~# cat /var/log/messages |grep -i "POST"
2020 May 28 13:21:22 bmc-oob. user.info fby3-v2020.20.2:
ipmid: POST Start Event for Payload#1
2020 May 28 13:21:25 bmc-oob. user.info fby3-v2020.20.2:
ipmid: POST End Event for Payload#1
root@bmc-oob:~#
Signed-off-by: TimChu <Tim.Chu@quantatw.com>
Change-Id: I38b512ee97c0eda6ba54482a448ef9ffc27b4ddb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41993
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We typically call checkpatch.pl through make lint which properly adds
the option to tell checkpatch that our lines may be 96 columns long.
However there's one mention of calling checkpatch directly and that
confuses people with complaints about overly long lines that exceed
80 columns.
The lint test that runs checkpatch (and with the right options)
can also be used on a per-directory basis, so offer that instead.
Change-Id: If21e925d2d2394c876724a44b0e23c9b2744c56b
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43450
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This pin has been removed from recent revisions (or at least moved to a
pin that's not controlled like a normal GPIO). It has also never been
used on older ones (I think?). The same GPIO is now used as a SKU ID
pin, so make sure we're not incorrectly configuring it as an output
(although sku_id() overrides that later anyway, but it's still
incorrect).
BUG=b:160754995
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I6e0d56e230d0bef172d7b78cc48263e9b6f059de
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43471
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Philip Chen <philipchen@google.com>
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This information is redundant since it's already specified in
baseboard/devicetree_trembyle.cb or baseboard/devicetree_dalboz.cb
domain 0 is still required because sconfig uses it as an identity anchor
to match devicetree and overridetree.
BUG=b:157580724
TEST=Boot zork, usb functional
Change-Id: I3c3c1c2410166b99599d7343fae3ee756f4da321
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43437
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Up until now we have no way of adding transparency into our firmware
screens. Add set_blend() and clear_blend() functions to store alpha
value and rgb values to calculate alpha blending in
calculate_colors().
BUG=b:144969091,b:160839199
BRANCH=puff
TEST=dut-control power_state:rec
press ctrl-d
Ensure background is dimmed when dialog pops up
Change-Id: I95468f27836d34ab80392727d726a69c09dc168e
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43358
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
If the AP actually needs to write to the TPM, then it is important and
the TPM should commit those changes to NVMEM immediately in case there
is an unexpected power loss (e.g. from a USB-C port partner reset upon
cold reboot request).
BRANCH=none
BUG=b:160913048
TEST=Verify that puff will no longer reboot loop when coreboot writes a
new Hmir (Hash mirror) in the TPM
Change-Id: I9597a55891d11bdf040d70f38b4c5a59c7888b8a
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43414
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SataPortsEnableDitoConfig Enable DEVSLP Idle Timeout settings DmVal and
DitoVal. SataPortsDmVal and SataPortsDitoVal helps to determine when to
enter Device Sleep. Device Sleep enables the host bus adapter (HBA) to
assert the DEVSLP signal as soon as there are no commands outstanding
to the device and the port specific Device Sleep idle timer has expired.
Device Sleep Idle Timeout values (PxDEVSLP.DITO and PxDEVSLP.DM) are
port specific timeout values used by the HBA for determining when to
assert the DEVSLP signal. They provides a mechanism for the HBA to apply
a programmable amount of hysteresis so as to prevent the HBA from
asserting the DEVSLP signal too quickly which may result in undesirable
latencies. This patch is created based on Intel Tiger Lake Processor
PCH Datasheet with Document number:575857 and Chapter number:12.
* PxDEVSLP.DM -> SataPortsDmVal: Enable SATA Port DmVal DITO multiplier.
Default is 15.
* PxDEVSLP.DITO -> SataPortsDitoVal: Enable SATA Port DmVal DEVSLP Idle Timeout
(DITO), Default is 625ms.
BUG=b:151163106
BRANCH=None
TEST=Build and boot volteer and TGL RVP.
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Change-Id: I6a824524738a9e0609f54bea9d892b4a42a1d3db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42214
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
0xc50, 0xc52, 0xc6f don't exist on Picasso. The PCI config space
registers define SATA and OHCI which are at the wrong bus locations.
I just remove the whole section since it's not used. We never access the
PCIe Error region, or the PM2 region either.
BUG=b:153001807, b:154756391
TEST=Build Trembyle
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I98aee09770f1df9f553c94580c1ee00c06a9cec1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43427
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The ACPI specification, version 2.0 says:
_BFS is an optional control method.
So, remove them. They have been copy-pasted around quite a bit, and do
not do anything useful. Plus, it's deprecated in later ACPI versions.
Change-Id: I9ef21f231dd6051d410ac3a0fe554908409c2fa7
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43443
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Forgetting to add the #pragma pack() at the end of the header file can
lead to hard to debug breakage, so get rid of the #pragma pack usage and
add a __packed to the structs that need to be packed which has less
possibly unwanted side effects.
Since commit d44221f9c8 coreboot always
includes commonlib/compiler.h which provides __packed.
TEST=Timeless build results in identical binary.
Change-Id: Icc53168f4fbc3a63a859f686b18e7023d225f8d2
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Add USB ports, USB user-facing camera and USB bluetooth to devicetree.
USB ports 4 and 5 are duplicated for picasso and dali.
BUG=b:158096224
TEST=Boot Trembyle and Dalboz, Dump acpi tables
Change-Id: Icf8628d91e27a3afdc5fd67a53b44089c809da87
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Split zork baseboard devicetree between dalboz and trembyle.
The devicetree is simply duplicated, no other changes in this commit.
BUG=b:158096224
TEST=Build coreboot for zork
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I5b26770790092c69db9567fa4337edd21a6ed809
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42741
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Screen flickered on VT2 on some devices after idle a period of time.
Remove SSR (1/8) setting for SA to default SSR (1/2), screen flicking
issue disappeared, and didn't affect acoustic noise much.
Because CB:38212 (commit eae254e) caused this issue.
BUG=b:160754994
TEST=build dratini, observe that screen flick issue disapppered
Change-Id: I9e81c2f15dd6babfa360eee213fc4ab6310c7455
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43284
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SaGv needs to be enabled for only QS. On ES2, we are seeing system
instability.
BUG=b:159198381
TEST=Tested for boot. Power and performance tests were run with
volteer2 with qs setup. System showed stability.
Tested for boot stability on on delbin.
Change-Id: I1bce3b9f837fb19ba5a20ae31750a73474a86788
Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42483
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Configure volteer2 and delbin, the two variants currently using
preQS or QS silicon, to use CSE Lite.
BUG=b:158140797
TEST=cd to volteer's asset_generation folder, execute
"./gen_all_variant_images.sh" and verify that all variant
images are produced.
Change-Id: I5e444529b090d82094b9da0df2648ea4cdb2888e
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Extract DRAM info from AMD_FSP_DMI_HOB and store it as mem_info in
cbmem with id CBMEM_ID_MEMINFO. Subsquently extract mem_info objects
from cbmem to build SMBIOS type 17 tables.
BUG=b:148277751,b:160947978
TEST=dmidecode -t 17
BRANCH=none
Change-Id: Iacedbb017d19516674070f89ba0aa217f55383e3
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43351
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
CB:43224 ("mb/google/zork: Add helpers for v3 schematics and wifi
power enable") added helper functions for determining if a board uses
v3 schematics. However, it introduced a regression by adding a wrong
check for variant_uses_v3_schematics() in variant_audio_update(). This
change fixes the check to ensure that dmic_gpio is updated when
variant is not using v3 schematics.
BUG=b:161141258,b:161128964
TEST=Verified on trembyle that trackpad works again (it was broken
because of the regression).
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I0e6ad844f68cface7b545f1547bd94470c30dde4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43415
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Create the woomax variant of the zork reference board by copying
the template(coreboot-zork/util/mainboard/google/trembyle)
files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.1.1).
BUG=b:158343602
BRANCH=None
TEST=emerge-zork coreboot
Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com>
Change-Id: I0bb8ce1851f4064d24e48fd8957e2f9fe1e80b53
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42680
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Change SPI speed from 66MHz, mode 1-1-2 to 100MHz mode 1-2-2.
“1-2-2" means command, address and data are transmitted
through 1 wire, 2 wire and 2 wire, respectively.
BUG=b:160603142
TEST=Boot on trembyle, verify register settings.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I14f96e3c085126c70e64ef3a3f5b7b54ce6cbffe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43306
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
As with other macros, convert PAD_CFG0_ROUTE_* to PAD_IRQ_ROUTE() to
make the code in gpio_defs.h cleaner.
Tested with BUILD_TIMELESS=1, Kontron COMe-mAL10 on T10-TNI carrierboard
does not change.
Change-Id: Iadc9c4b3c96ae04c56d060cb060737a8eba7f165
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41034
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Converts PAD_CFG0_RX_POL_* macros to PAD_RX_POL() to make the code
cleaner and reduce the length of the macro.
Tested with BUILD_TIMELESS=1, Kontron COMe-mAL10 on T10-TNI carrierboard
does not change.
Change-Id: I09a048fd38ccb994f53c8829c549bc2b368fa546
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41033
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Converts PAD_CFG0_TRIG_ * macros to PAD_TRIG() to make the code cleaner
and reduce the length of the macro, which is often used.
Tested with BUILD_TIMELESS=1, Kontron COMe-mAL10 & T10-TNI carrierboard
does not change.
Change-Id: I9e1b4118fd6c6f0d58ee38a743aa8c27535f0dd9
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41032
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Current the common soc code automatically selects PCIEXP_CLK_PM and
PCIEXP_L1_SUB_STATE which breaks booting Windows with a PCIE NVIDIA
graphics card attached on mainboards that do not have a CLKREQ# signal.
This is commonly used on server and workstations boards where the
additional power savings of L1 substate are not required.
Make the PCIEXP_CLK_PM and PCIEXP_L1_SUB_STATE default y but do not
select it anymore by the soc code, thus we can disable it in the
mainboard code.
Tested on CFL with Windows 10.
Change-Id: I025e13d6d8183256647e4c034e31bafa235f7eb7
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41696
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Share "EC in RW" GPIO with depthcharge. Also we define the CONFIGS
needed CHROME, CHROME_EC and use the chrome lid and recovery.
BUG=None
BRANCH=None
TEST=Build and boot TGL RVP. Check recovery works with
crossystem recovery_request.
Change-Id: I1e88200e3f8418e5b0ab39ac65ed1b3545ce111e
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Platform HOBs (in particular IIO_UDS and MemoryMap HOBs) are of HOB type
HOB_TYPE_GUID_EXTENSION, therefore they do not have resource structure.
Remove the erroneous code related to resource structure.
Remove unnecessary function prototypes from header files, and define them
as static in hob_display.c.
Since we have the HOB pointer, there is not need to search HOB by GUID.
Remove unnecessary calling of fsp_find_extension_hob_by_guid().
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com>
Change-Id: Ib99bce39e6eb2aeb95242dfba36774653bbe91fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43335
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Read VPD variable 'fsp_log_enable' to decide enabling FSP log or not.
With VPD_RW_THEN_RO, VPD_RW takes precedence over VPD_RO, and
would be set to enabled if both places cannot find it.
Tested=On OCP Delta Lake, use vpd to create and set fsp_log_enable
and verified the results are expected.
Change-Id: I0b3463acedd90e8e17f7e4eedc2fab63644f87e1
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: insomniac <insomniac@slackware.it>
CPX-SP FSP ww28 release adds UPDs to allow enablement of VT-d and VMX.
Also update IIO UDS HOB definition file accordingly.
Intel CPX-SP FSP has been using FSPM_CONFIG intead of FSP_M_CONFIG.
Other Intel FSPs have been using FSP_M_CONFIG. The feedback from Intel
is that they will converge to use FSPM_CONFIG over time. So both will
co-exist for some time. Today coreboot common code expects FSP_M_CONFIG.
Accomodate this situation in FspmUpd.h.
The CPX-SP soc code is updated accordingly.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: If6d0a041eaad9eb2f811e74d219fff1cc38e95a4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43315
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
On ChromeOS systems with a serial-enabled BIOS and vboot writing a new
firmware image to the Chrome EC, it was possible for the TCO watchdog
timer to trip 2 times before tco_configure() was called in romstage.
This caused an extra reboot of the system (at a rather inopportune time)
and because the EC didn't perform a full reset, the system boots into
recovery mode.
This patch moves the call to tco_configure() for Tiger Lake from
romstage to bootblock, in order to make sure the TCO watchdog timer is
halted before vboot_sync_ec() runs in romstage. It should be harmless to
configure the TCO device earlier in the boot flow.
BUG=b:160272400
TEST=boot Volteer (to a non-recovery kernel!) with a freshly imaged EC
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Iefdc2c861ab8b5fde7f736c04149be7de7b3ae0c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43313
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
IRQ 10 and IRQ 11 are valid for all southbridges using this code, as per
their respective datasheets. So, add them for the sake of completeness.
Change-Id: Ib4504861ed316a95b9735e0ed79f108f18071b3b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43158
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This adds Type-C Intel Input Output Manager(IOM) device with HID
INTC1072. It provides MMIO range from 0xfbc10000 with size 0x1600.
Intel Input Output Manager(IOM) kernel driver reads relevant
information such as Type-C port status (whether a device is connected
to a Type-C port or not) and the activity type on the Type-C ports
(such as USB, Display Port, Thunderbolt) using this memory resource.
BUG=b:156016218
TEST=Able to detect USB, TBT and USB4 on Volteer.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Ic733e831643bda6e052edf797ba0e6206eb4ddd3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41762
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This adds Type-C IO Manageability engine base address and size.
Tigerlake EDS(#575681) section 3.4.3 describes host bridge
REGBAR(MCHBAR) + 7110h for IOM REGBAR with size 1600h. IOM has a
port ID 0xc1. MCHBAR is programmed with 0xfedc0000. IOM REGBAR is
determined from mmio (MCHBAR + 0x7110), which has value 0xfb000000.
IOM has base address 0xfbc10000 from IOM REGBAR + (0xc1 << 16).
BUG=🅱️156016218
TEST=Built and booted on Volteer.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I70d88ba318087f7acacd1ee84609c9db5b65f907
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41759
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Upstream does not require it. From the repository readme:
"Note: When cloning submodule repos, '--recursive' option is not recommended.
EDK II itself will not use any code/feature from submodules in above submodules.
So using '--recursive' adds a dependency on being able to reach servers we do not
actually want any code from, as well as needlessly downloading code we will not use."
Change-Id: I0c5d6dd6e5070720870fc22b2476c6fe8dc7fd40
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43063
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
We only want to return an ACPI name for a USB port if the controller
physically has the port. This has the desired side effect of making the
usb_acpi driver skip generating an ACPI node for a device which has
no port. This prevents writing an invalid SSDT table which the OS then
complains about.
BUG=b:154756391, b:158096224
TEST=Boot picasso trembyle and verify HS05, HS06 and SS05 are no longer
generated. Also checked the logs and saw the devices being ignored.
\_SB.PCI0.LPCB.EC0.CREC.TUN0: Cros EC I2C Tunnel at GENERIC: 0.0
\_SB.PCI0.LPCB.EC0.CREC.MSTH: Cros EC I2C Tunnel at GENERIC: 1.0
\_SB.PCI0.LPCB.EC0.CREC.ECA0: Cros EC audio codec at GENERIC: 0.0
\_SB.PCI0.PBRA.XHC0.RHUB.HS01: Left Type-C Port at USB2 port 0
\_SB.PCI0.PBRA.XHC0.RHUB.HS02: Left Type-A Port at USB2 port 1
\_SB.PCI0.PBRA.XHC0.RHUB.HS03: Right Type-A Port at USB2 port 2
\_SB.PCI0.PBRA.XHC0.RHUB.HS04: Right Type-C Port at USB2 port 3
xhci_acpi_name: USB2 port 4 does not exist on xHC PCI: 03:00.3
xhci_acpi_name: USB2 port 5 does not exist on xHC PCI: 03:00.3
\_SB.PCI0.PBRA.XHC0.RHUB.SS01: Left Type-C Port at USB3 port 0
\_SB.PCI0.PBRA.XHC0.RHUB.SS02: Left Type-A Port at USB3 port 1
\_SB.PCI0.PBRA.XHC0.RHUB.SS03: Right Type-A Port at USB3 port 2
\_SB.PCI0.PBRA.XHC0.RHUB.SS04: Right Type-C Port at USB3 port 3
xhci_acpi_name: USB3 port 4 does not exist on xHC PCI: 03:00.3
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ia645380bea74f39fd94e2f9cbca3fcd4d18a878e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43354
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There is some boilerplate required to iterate over the USB supported
protocol structs. Encapsulate all the in a method to make the callers
simpler.
BUG=b:154756391
TEST=Built test trembyle.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I401f10d242638b0000ba697573856d765333dca0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43352
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There's no generic way to tell whether a mainboard has an EC or not.
Making Kconfig symbols for these options seems overkill, too. So, just
put them on the devicetree. Also, drop unnecessary assignments when the
board's current value is zero, as the struct defaults to zero already.
Change-Id: If2ebac5fcab278c97dfaf8adc9d1e125888acafe
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43129
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Current code only cares whether the PCH is LP or not. However, MRC wants
to differentiate between desktop and non-LP mobile platforms as well. As
the PCH is soldered onto the mainboard, add a facility to retrieve which
platform coreboot is running on by checking the PCH's LPC device ID. The
only user of the `pch_silicon_type` function is the `pch_is_lp` function
so replace the former with the new `get_pch_platform_type` function. The
function needs to be defined in both romstage and ramstage where PCI ops
have different signatures, hence the two copies.
Change-Id: Ib6276e0069eaa069a365faf6ae02dd934307d36c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43123
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This Kconfig symbol allows doubling the memory's refresh rate, assuming
that the MRC actually cares about it. It is disabled by default except
on the mainboards which explicitly enabled this setting in `pei_data`.
Change-Id: I6318dad0350d1c506c67f9d117d0ae8dad871281
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43122
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Several of these includes are no longer necessary. Get rid of them.
Since "raminit.h" already includes "pei_data.h", we can omit including
the latter for brevity's sake.
Change-Id: Ia7e9dadf87114ca9ea4761b89909ea035cdfc38a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43121
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
All mainboards have a non-zero SPD address to implemented DIMM slots.
Knowing this, it is possible to compute the MRC slot population masks
automatically instead of hardcoding the values on each mainboard.
Change-Id: Ia8f369dd1228d53d64471e48700e870e01e77837
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43119
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These settings are the same on all boards. Since the other boards
currently overwrite the struct contents, it doesn't make a difference.
To ease review, the same settings will be dropped from other boards in
separate commits, one board at a time.
Change-Id: I500b7a1d7d97c6976e0c7c10ca491d3875cae22b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43109
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
The DxxIR (Device xx Interrupt Route) registers in RCBA are 16-bit wide,
so do not use 32-bit operations to program them.
Note that the DxxIP (Device xx Interrupt Pin) registers are 32-bit, so
using 32-bit operations on them is correct.
Change-Id: I9699b98d5fcd26b2c710bf018f16acc65dcb634e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43107
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Instead of using function pointers, we can use weak functions. So, drop
the pointer from `romstage_params`, leaving `pei_data` as the only
remaining member. This will be cleaned up in a follow-up commit.
Change-Id: I3b17d21ea7a650734119a5cab4892fcb158b589d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43105
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The current value of 0x1000 would overlap the first PCI bridge IO
window. As we commonly reserve IO range 0x0 .. 0x1000 for LPC and
integrated device use, change SMBUS_IO_BASE to 0x400. This is the
prevalent value among Intel southbridges, too.
Change-Id: I5c299f001f9012d6766b155a2f5def5cff6e88d1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43023
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This function is called at the end of `romstage_common`. Only one board
makes use of it, the Lenovo ThinkPad T440p. To preserve behavior, call
it after `romstage_common` has done nearly everything.
Change-Id: I35742879e737be4f383a0e36aecc6682fc9df058
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43094
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This provides the functionality to provide the GPE to the pci_xhci
driver.
BUG=b:154756391, b:160651028
TEST=Dump ACPI tables and verify GPE is set. Also dump SMI regs and
verify GPE is set. Resume using a USB keyboard.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ice7203831a1f65ed32f3a6392fe02c4b17d42617
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43332
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
We can use xhci_for_each_ext_cap to inspect the xHC so we generate the
correct number of device nodes.
Scope (\_SB.PCI0.PBRA)
{
Device (XHC1)
{
Name (_ADR, 0x0000000000000004) // _ADR: Address
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x1F,
0x03
})
Device (RHUB)
{
Name (_ADR, Zero) // _ADR: Address
Device (HS01)
{
Name (_ADR, 0x01) // _ADR: Address
}
Device (HS02)
{
Name (_ADR, 0x02) // _ADR: Address
}
Device (SS01)
{
Name (_ADR, 0x03) // _ADR: Address
}
}
Name (_S0W, Zero) // _S0W: S0 Device Wake State
Name (_S3W, 0x04) // _S3W: S3 Device Wake State
Name (_S4W, 0x04) // _S4W: S4 Device Wake State
}
}
BUG=b:154756391
TEST=Boot trembyle and look at ACPI table. See all xHCI nodes.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I44ebaef342e45923bc181ceebef882358d33f0d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41900
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Data fabric devices are PCI devices which support PCI configuration
space but do not require any MMIO/IO resources. This change adds a PCI
driver for the data fabric devices which only provides device
operations for adding node to SSDT and returning the ACPI name for the
device.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I3da9287db5febf1a1d7eb1dfbed9f1348f80a588
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43314
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change adds a driver pcie_gpp.c which provides device_operations
for external and internal PCIe GPP bridges. These device operations
include standard PCI bridge operations as well as operations for
generating ACPI node for the device and returning appropriate ACPI
name for it.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I9f8809c2735bdc09435deda91a570c89e71e8062
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43312
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
It's useful to see the stack when an exception happens so you can see
the variables on the stack, and also manually recreate the back trace.
If you need to recreate the back trace, you will need to add
-fno-omit-frame-pointer to the CFLAGS.
BUG=b:159081993
TEST=Caused an exception and saw the stack dumped. Then I manually
recreated the back trace.
0xcc6fff6c: 0xcc6ce02e <- 0xcc6ce02e is in dev_initialize
0xcc6fff68: 0xcc6fff88 <-- frame 1
0xcc6fff64: 0x00000005
0xcc6fff60: 0x000000dc
0xcc6fff5c: 0x00000000
0xcc6fff58: 0x00000200
0xcc6fff54: 0x00000000
0xcc6fff50: 0x00000400
0xcc6fff4c: 0xcc6d72d4 <- 0xcc6d72d4 is in setup_default_ebdad
0xcc6fff48: 0xcc6fff68 <-ebp
0xcc6fff44: 0x00000005
0xcc6fff40: 0xcc6f571c <-esp
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I3822ea7aa23202ecc98612850402eeb4b1f7b5ef
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Zork devices shut down the i2c controllers in S3 to save power. On
resume, they need to be enabled in verstage before being accessed or
the system hangs.
BUG=b:160834101
TEST=Resume works with psp_verstage.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I7b8c7e12847876dab4ca74d67d3c41e63d7727cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43334
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When entering S3, zork shuts down the i2c controllers to save power.
On resume, we need to re-enable i2c before accessing them, so we need
to map the AOAC registers in verstage.
BUG=b:160834101
TEST=psp_verstage works after resume.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: Ia8aa4923898a50f2202b6ca8434cee61a5918e91
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43333
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Sort them by stage execution order, then alphabetically. Place more
complex rules at the end.
Tested with BUILD_TIMELESS=1, Roda RK9 remains identical.
Change-Id: Ieadda7c264e0288a212b73febbe9f73351cc4de4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42649
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Sort them by stage execution order, then alphabetically. Place more
complex rules at the end.
Tested with BUILD_TIMELESS=1, Intel DG43GT remains identical.
Change-Id: I1b36d6c0b2e615938272d65456cf10be54f66c38
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42648
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The SMM_LOCK bit isn't in SMM_MASK_MSR, but in HWCR_MSR, so move it
there. The soc/amd/* code itself uses the bit definition when accessing
HWCR_MSR, so SMM_LOCK was just below the wrong MSR definition.
Also remove SMM_LOCK from comment about masking bits in SMM_MASK_MSR,
since that bit isn't in that MSR.
TEST=Checked the code and the corresponding BKDG/PPR.
Change-Id: I2df446f5a9e11e1e7c8d10256f3c2803b18f9088
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43309
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The kernel requires the display oprom is loaded and ran
in order for the kernel to not panic. Therefore, select the
correct settings such that normal mode works for Chrome OS.
BUG=b:160560510
TEST=Boot Trembyle in developer mode and normal mode
Change-Id: Ia6bcc99f8880a45818f959a957660c2c43b1bfdf
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43257
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The old values were completely out of whack. Use the same settings as
vendor firmware. The SUPERIO_NUVOTON_NCT6776_COM_A option overwrites
configured settings, so drop it from Kconfig to prevent conflicts.
Change-Id: I9743741518adc153d594ccae65298c7dcc8a88d1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42403
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Instead of passing around a pointer to an array, just write the relevant
registers directly. Note that intel/baskingridge used spaces to indent
line continuations and had to be replaced with tabs to quell Jenkins.
Change-Id: Ifa06a2ab24da9b8c6aac6480542fa32d04f6d6fe
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43097
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This patch improves the image resampling (scaling) code in CBGFX to use
the Lanczos algorithm that is widely considered the "best" resampling
algorithm (e.g. also the first choice in Python's PIL library). It is of
course much more elaborate and therefore slower than bilinear
resampling, but a lot of the difference can be made up with
optimizations, and the resulting code was found to still produce
acceptable speeds for existing Chrome OS UI use cases (on an Arm
Cortex-A55 device, time to scale an image to 1101x593 went from ~88ms to
~275ms, a little over 3x slowdown). Nevertheless, if this should be too
slow for anyone there's also an option to tune it down a little, but
still much better than bilinear (same operation was ~170ms with this).
Example images (scaled up by a factor of 7):
Old (bilinear): https://i.imgur.com/ytr2n4Z.png
New (Lanczos a=3): https://i.imgur.com/f0vKluM.png
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Idde6f61865bfac2801ee4fff40ac64e4ebddff1a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42792
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
struct fraction is slooooooooooow. This patch adds a simple 64-bit
(32-bits integral, 32-bits fractional) fixed-point math API that is
*much* faster (observed roughly 5x speed-up) when doing intensive
graphics operations. It is optimized for speed over accuracy so some
operations may lose a bit more precision than expected, but overall it's
still plenty of bits for most use cases.
Also includes support for basic trigonometric functions with a small
lookup table.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Id0f9c23980e36ce0ac0b7c5cd0bc66153bca1fd0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42993
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Remove I2C4 since it is a slave device used for USB-C mux control
and should not be included with the other master devices.
BUG=b:160624619 b:160292546
TEST=EC can communicate with AP mux I2C4 slave
Change-Id: Idaad618e90d6264d881dc66628cf581a856c231d
Signed-off-by: Edward Hill <ecgh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43263
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds following two helper functions:
1. variant_uses_v3_schematics() - Check whether the variant is using
v3 version of schematics.
2. variant_has_active_low_wifi_power() - Check whether the variant is
using active low power enable for WiFi.
In addition to this, Kconfig options are reorganized to add two new
configs - VARIANT_SUPPORTS_PRE_V3_SCHEMATICS and
VARIANT_SUPPORTS_WIFI_POWER_ACTIVE_HIGH. This allows the helper
functions to return `true` early without checking for board version.
Eventually, when a variant decides to drop support for pre-v3
schematics, it can be dropped from selecting
VARIANT_SUPPORTS_PRE_V3_SCHEMATICS. Similarly, when the variant
decides to drop support for active high power enable for WiFi, it can
be dropped from selecting VARIANT_SUPPORTS_WIFI_POWER_ACTIVE_HIGH.
Change-Id: I62851299e8dd7929a8e1e9a287389abd71c7706c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43224
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Perform the same operations as the RCBA reg script did, but directly
writing the corresponding registers. Some of these operations could be
simplified, but it is not done on this commit to ease verification.
Change-Id: I4c3177ab14ca9bfa2e8d11c27fb249850183eee5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
The "normalized" boot mode is only used in a single place, so there's no
need to use a variable. Also, reword the associated comment, which seems
to be unnecessarily vague: the hardcoded assumptions are inside the MRC.
Change-Id: I260d10f231f5de765d2675416d7047717d391d8f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43092
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Use C-style comments, drop unneeded newlines, add missing commas for
consistency and relocate a comment to match the code.
Tested with BUILD_TIMELESS=1, Getac P470 remains identical.
Change-Id: I37fffb60944c35dfb5e0491bb023babfcf2c6a73
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43177
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use C-style comments, drop an unneeded newline, add missing commas for
consistency and relocate a comment to match the code.
Tested with BUILD_TIMELESS=1, Roda RK9 does not change.
Change-Id: I3f91d1b57eb5530c8adcf5f682e73747435f0d47
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43172
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The timestamp functionality is not yet added for psp_verstage, so
temporarily remove it until that's completed. That work is being
tracked by bug 154142138.
BUG=b:154142138
TEST=Build & Boot psp_verstage on trembyle
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I020619e3615ce92dedbe868104d2bfd83cb7caa9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42381
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The AMD firmware package created by amdfwtool contains pointers to the
various binaries and settings. When these are moved to the RW-A & RW-B
regions, the packages need to be recreated for the new addresses.
TEST=Build & boot trembyle. See that we're booting from the correct
region.
BUG=b:158124527
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I0d50968b6ab4b3ab51f8c9bc66c56e141ef728ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42225
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The AMD firmware package created by amdfwtool contains pointers to the
various binaries and settings. This means that we need different copies
of the package in each region.
This change allows for the different files in each of the 3 vboot
regions.
BUG=b:158124527
TEST=Build trembyle; see the correct versions of the files getting
built into the RW-A & RW-B regions.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I45ff69dbc2266a67e05597bbe721fbf95cf41777
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This is the main code for building coreboot's verstage as a userspace
application to run on the PSP. It does a minimal setup of hardware,
then runs verstage_main. It uses hardware hashing to increase the speed
and will directly reboot into recovery mode if there are any failures.
BUG=b:158124527
TEST=Build & boot trembyle
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ia58839caa5bfbae0408702ee8d02ef482f2861c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41816
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
It already looks for them, so let's use the result instead
of blindly defaulting to gcc/g++, except when not building an image
(but run kconfig or tests) because we don't use xcompile in those cases.
Change-Id: I3e50c70a609f1903a925610928f8779c191040d8
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43145
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
If there's a host compiler in XGCCPATH, it's likely the same
relatively-current version we use for coreboot, and it's a well-known
quantity, so let's prefer that over alternatives by default.
In addition, look for the C++ host compiler as well.
Change-Id: If50341df169a476899b5a5ffd4c4fb6d21c3f4ac
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43144
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable long mode in SMM handler.
x86_32 isn't affected by this change.
As the rsm instruction used to leave SMM doesn't restore MSR registers,
drop back to protected mode after running the smi_handler and restore
IA32_EFER MSR (which enables long mode support) to previous value.
NOTE: This commit does NOT introduce a new security model. It uses the
same page tables as the remaining firmware does.
This can be a security risk if someone is able to manipulate the
page tables stored in ROM at runtime. USE FOR TESTING ONLY!
Tested on Qemu Q35.
Change-Id: I8bba4af4688c723fc079ae905dac95f57ea956f8
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35681
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The host bridge register definitions haven't changed from Sandy Bridge
to Haswell, according to the datasheets. However, coreboot's ACPI code
is not the same. Looks like Haswell values are wrong, so correct them.
Change-Id: Ib099575b5cc5e7d468db51f382a15b8aac3eedea
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43151
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
No other architecture in libpayload outputs anything in the main entry
routine. Let alone an exception test which looks like a real exception
to the normal user and is most likely really misleading. Silence the
startup code.
Change-Id: I6e49f24ad46ce578a4bb111c2d623ca4470a1866
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43126
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add VPD variables for enabling/disabling FRB2 watchdog timer and setting
the timer countdown value. By default it would start the timer and
trigger hard reset when it's expired. The timer is expected to be
stopped later by payload or OS.
Tested on OCP Delta Lake.
Change-Id: I3ce3bdc24a41d27eb1877655b3148ba02f7f5497
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42495
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
The tlbimvaa operation (invalidate unified TLB by MVA, all address
space identifiers) is only available on armv7 processors that support
Multiprocessing Extensions. When used on processors that do not support
the extensions it causes an "undefined instruction" exception.
This patch changes the MMU table entry filling code to use the tlbimva
(invalidate unified TLB entry by MVA and address space identifier)
operation for invalidating TLB entries, which is supported on all armv7
processors.
As address space identifiers are not used in TLB entries in coreboot
(all entries are set as global), these two operations can safely be
used interchangeably. The ASID value supplied to the operation is not
checked for global TLB entries.
More information as well as the data formats for the tlbimvaa and
tlbimva operations are detailed in the "ARM Architecture Reference
Manual ARMv7-A" edition, issue "C.c" page B4-1747.
TEST: Booted Beaglebone Black (my current in progress port)
Change-Id: Ie7dfb4adab20dc7eecb1b20aa2ee6355215a1521
Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43137
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
ec_fill_dptf_helpers() is used to generate all of the "helper" methods
that DPTF requires. A system with a Chrome EC is typically in charge
of fan PWM control as well as battery charging, so if DPTF needs to
manipulate those, then it requires Methods provided by the EC.
BUG=b:143539650
TEST=compiles
Change-Id: Ib30072d1d0748b31bcab240a0fd0e2f12d34aaa4
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41894
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When converting to override trees in commit c1dc2d5e68 (mb/lenovo/t60:
Switch to override tree), some device nodes were missed. These are
essential, as `chip` configuration data is always tied to device
nodes. The resulting `static.c` contained multiple copies of the
`chip` configuration structs, but the wrong ones were hooked up.
The therefore missing configuration of the clock gen led to general
instability, especially with SMP under Linux (probably due to the
attempt to enter lower C states on an idle core). Passing `maxcpus=1`
to the Linux kernel served as a workaround.
Change-Id: I6c26d633d1860cf9a5415994444e75ae1c2e59ad
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43150
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change disables Thunderbolt PCIe root ports bus master before
handing over to payload in order to mitigate the threat from the
unauthorized external DMA. In this state, the PCIe root ports would
be considered as trusted to not forward any DMA transactions to
downstream endpoint devices.
BUG=b:141609884
TEST=Verified PCIe resource has been allocated properly and USB behind
Thunderbolt dock is enumerated successfully.
Change-Id: I9650b9dd4df1f9bee53ae3737b7bf60b2ef8017b
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40968
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
At this moment, Vilboz board version is 1 and it
according to v3+ schematics, however WiFi power enable
is active high. This change sets
VARIANT_MIN_BOARD_ID_V3_SCHEMATICS for Vilboz as 1
and VARIANT_MIN_BOARD_ID_WIFI_POWER_ACTIVE_LOW as 2.
BUG=b:160547115
BRANCH=None
TEST=flash the bios to vilboz DUT and test WIFI module
Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I9699bb839a801ab7d14c38b971ec28e3a322a997
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43161
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Two usb Type-C ports under the actual mux device. Each port has its own
ACPI device entry. These nodes are the ones that the USB Type-C
port/connector device will refer to in order to configure the mux.
TEST=Verified the scope of PMC.MUX CONx in the SSDT on Tigerlake RVP
board.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I7210e00cebe16a5fb8417ac23abad98e574e0982
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42953
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Volteer world-facing camera has a privacy LED and it is supposed
to be turned on only when the camera is being used. But the LED
is always on and this is to fix the issue.
RCAM_SNR_PWR_EN (RearCAMera_SeNsoR_PoWeR_ENable) GPIO, which
controls the world-facing camera LED, was not in the power-up
and power-down sequence definitions and this caused the issue.
BUG=b:160341981
BRANCH=none
TEST=Build and boot volteer proto 2 board. Start a camera app
and check the world-facing camera LED is only turned on only when
the camera is working.
Signed-off-by: Daniel Kang <daniel.h.kang@intel.com>
Change-Id: I564690baffddfdd0f998525992643aaf16ba4b02
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42985
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Daniel H Kang <daniel.h.kang@intel.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
\_SB.DPTF.IDSP adverties to the DPTF daemon which policies the
implementation supports. Added a new acpigen function to figure out
which policies are used, and fills out IDSP appropriately.
Change-Id: Idf67a23bf38de4481c02f98ffb27afb8ca2d1b7b
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42081
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
DPTF has several options on how to control the fan (fine-grained speed
control, minimum speed change in percentage points, and whether or not
the DPTF device should notify the Fan if it detects low speed).
Individual TSRs can also set GTSH, which is the amount of hysteresis
inherent in the measurement, either from circuitry (if analog), or in
firmware (if digital).
BUG=b:143539650
TEST=compiles
Change-Id: I42d789d877da28c163e394d7de5fb1ff339264eb
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41891
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This change adds support for emitting the PPCC table, which describes
the ranges available as knobs for DPTF to tune. It can support min/max
power, min/max time window for averaging, and the minimum adjustment size
(granularity or step size) of each power limit. The current implementation
only supports PL1 and PL2.
BUG=b:143539650
TEST=compiles
Change-Id: I67e80d661ea5bb79980ef285eca40c9a4b0f1849
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41890
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This change adds support for generating the _FPS table for the DPTF Fan
object. The table describes different levels of fan activity that may be
applied to the system in order to actively cool it. The information
includes fan speed at a (rough) percentage level, fan speed in RPM,
potential noise level in centibels, and power in mA.
BUG=b:143539650
TEST=compiles
Change-Id: I5591eb527f496d0c4c613352d2a87625d47d9273
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41889
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This change generates the DPTF TCHG.PPSS table in the SSDT. This table
describes different charging rates which are available to use. DPTF
can pick different rates in order to passively cool (or not) the
system.
BUG=b:143539650
TEST=compiles
Change-Id: I6df6bfbac628fa4e4d313e38b8e6c53fce70a7f2
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41888
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This patch adds support for DPTF Critical Policies, which are consist
of Method definitions only. They are `_CRT` and `_HOT`, which are
defined as temperature thresholds that, when exceeded, will execute a
graceful suspend or a graceful shutdown, respectively.
BUG=b:143539650
TEST=compiles
Change-Id: I711ecdcf17ae8f6e653f33069201da4515ace85e
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41887
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This patch adds support for emitting the Thermal Relationship Table, as
well as _PSV Methods, which together form the basis for DPTF Passive
Policies.
BUG=b:143539650
TEST=compiles
Change-Id: I82e1c9022999b0a2a733aa6cd9c98a850e6f5408
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
In this DPTF implementation, the participant device objects are written
into the DSDT with only minimal Names attached (_HID/_ADR, _STA, _UID,
PTYP, and _STR). All other Methods & Names will be written into the
SSDT. If a device is not used in any policy, then its _STA is set to
return 0 ("off").
BUG=b:143539650
TEST=Compiles.
Change-Id: Ief69a57adce9ee0b19056ce6a11ed8a5b51b3f87
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Based on schematic and gpio table of terrador, generate gpio settings
and overridetree.cb for terrador.
BUG=b:156435028,b:151978872
TEST=FW_NAME=terrador emerge-volteer coreboot chromeos-bootimage
Verify that the image-terrador.bin is generated successfully.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I4bf9081b034bc4cd566dde45586be8309cdbb4a3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42302
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds memory parts used by variant terrador to
mem_list_variant.txt and generates DRAM IDs allocated to these parts.
Added memory
1. MT53E512M64D4NW-046 WT:E
2. MT53E1G64D8NW-046 WT:E
BUG=b:159195585,b:152936481,b:156435028
TEST="emerge-volteer coreboot chromeos-bootimage", flash terrador and
verify terrador boots to kernel.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ia14f76e9cb0df64961d46f4b61b39439e56f6a8c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41995
Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The `ENABLE_SMBUS_METHODS` symbol is not defined anywhere, so this code
isn't even being tested. So, throw it into the bitbucket before it rots
any further. If anyone needs that code ever again, it's in git history.
Change-Id: I22e3f1ad54e81f811c9660d54f3765f3c6b83f01
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43024
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Enable HotPlug for the PCIe root port that the SD express is on so the
OS can re-train the link without needing a reboot if it goes down
unexpectedly at runtime.
BUG=b:156879564
BRANCH=master
TEST=enable HotPlug on Volteer Root Port 7 (SD express) and check in
linux that it is identified as a HotPlug capable root port
Signed-off-by: Nick Chen <nick_xr_chen@wistron.corp-partner.google.com>
Change-Id: Ie9d427dd297567f06123119a670b5ed2e1f73701
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42897
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
A regression sneaked in with 18a8ba41cc (arch/x86: Remove RELOCATABLE_
RAMSTAGE). We want to call load_relocatable_ramstage() on x86, and
cbfs_prog_stage_load() on other architectures. But with the current
code the latter is also called on x86 if the former succeeded. Fix
that and also balance the if structure to make it more obvious.
TEST=qemu-system-x86_64 boots to payload again.
Change-Id: I5b1db5aac772b9b3a388a1a8ae490fa627334320
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43142
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PS/2 keyboard and mouse devices are declared twice in the DSDT, once
in mainboard and once in southbridge. It would appear in Windows
Device Manager as two PS/2 keyboards and two PS/2 mouses, all with
resource conflicts. This change drops the declaration from mainboard.
The issue was discovered when this setup was copied for p8z77-m and
being boot tested.
Change-Id: I746a960aaf3992acbcb6a7364641fc4fd12002d2
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41225
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
As the booting the system can be delayed for a noticeable amount of
time, often 60 seconds is the default, this is not a debug message.
Chose log level BIOS_INFO.
Change-Id: I941792148820c0e1d3fbc80197125fee8cedf09f
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41998
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Based on schematic and gpio table of voxel, generate gpio settings
and overridetree.cb for voxel.
BUG=b:157879197,b:155062762
TEST=FW_NAME=voxel emerge-volteer coreboot chromeos-bootimage
Verify that the image-voxel.bin is generated successfully.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I49c1923e63d87f11de362fd893905ac2f1137bba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42731
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
log2(1) is 0 and log2(0) is -1. If we have the int64_t 0xffffffff then
log2(0xffffffff >> 31) = log2(0x1) = 0, so the current reduction code
would not shift. That's a bad idea, though, since 0xffffffff when
interpreted as an int32_t would become a negative number.
We need to always shift one more than the current code does to get a
safe reduction. This also means we can get rid of another compare/branch
since -1 is the smallest result log2() can return, so the shift can no
longer go negative now.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ib1eb6364c35c26924804261c02171139cdbd1034
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42845
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Joel Kitching <kitching@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The USB-C SBU and HSL orientation configuration depends on the USB
daughterboard used on the system. This patch adds an additional
configuration for supporting passive USB daughterboards using "probe"
directives to select the appropriate configuration at runtime.
BUG=b:158673460
TEST=verified active USB DBs enumerate at USB3 speeds in linux
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Change-Id: Ia4bd97de8f974531f97469a5e47ecf4d948beca9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42905
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Upcoming builds of boten will use 16 MiB SPI ROM. So create a legacy
Boten variant to support the builds that use 32 MiB SPI ROM.
BUG=None
TEST=Build the boten and boten_legacy variant.
Cq-Depend: TBD
Change-Id: Idf7732768aa7fbf2281a4cbf47b7b5b4f8ef51da
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42961
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Upcoming builds of drawcia will use 16 MiB SPI ROM. So create a legacy
Drawcia variant to support the builds that use 32 MiB SPI ROM.
BUG=None
TEST=Build the drawcia and drawcia_legacy variant.
Cq-Depend: TBD
Change-Id: Ifb5a4778abe38a396e35963a3270b0d3cc9809e0
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42960
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Since coreboot is initializing uart for debug logs, fsp should not reinitialize it.
Thus we need to set FSP UPD to skip Uart init in FSP and use settings done by coreboot
BUG=None
BRANCH=None
TEST=FSP is able to push debug logs on UART with this setting
Cq-Depend: TBD
Change-Id: I0fda2ace3b1f63159e9809d6a3044a3bad452f07
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42462
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Skip sending MboxBiosCmdSxInfo for sleep states other than S3. The
PSP only acts on S3 and ignores all others. As a result, the command
register is not cleared upon return and coreboot reports a timeout.
BUG=b:153622879
TEST=Use halt from command line, verify command skipped.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ic47b8507e29e4c53898e88fb46e532b71df87d07
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43038
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change drops the check for ENV_RAMSTAGE in mainboard_ec_init()
since it is included only in ramstage. Also, the content of
ramstage_ec_init() is moved into mainboard_ec_init().
Change-Id: I282fb07a80f4de6064a544f6dd58e8f973a597b9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43118
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
mainboard_ec_init() does nothing in any stage other than ramstage. So,
this change drops the call to mainboard_ec_init() from
romstage.c. Additionally, it also drops ec.c from romstage and
verstage.
Change-Id: Iae0be4d678b0780cf532000a6c0fff1bce333c0e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43117
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change drops the inclusion of codec.asl in DSDT for `GOOG0013`
device and instead uses the newly added Chrome EC audio codec driver
for filling in the device node in SSDT.
TEST=Verified that following node gets generated:
Scope (\_SB.PCI0.LPCB.EC0.CREC)
{
Device (ECA0)
{
Name (_HID, "GOOG0013") // _HID: Hardware ID
Name (_UID, One) // _UID: Unique ID
Name (_DDN, "Cros EC audio codec") // _DDN: DOS Device Name
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
}
}
Change-Id: I3e626ce01a3735ac2c966c0e95310be4c828b241
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43042
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds driver for audio codec device (HID `GOOG0013`) living
behind Chrome EC. This driver generates the required ACPI node for the
codec device. In a later change, GOOG0013 device will be dropped
the .asl file.
Change-Id: Ib2759eac60265ef81df70af1d4f1f72bd9d987e8
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43041
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With devicetree listing drivers/pc80/tpm, it is compulsory
to have the corresponding driver included in the build.
Followup work will drop the associated weak function
declaration that util/sconfig currently generates.
Change-Id: Ife8deb2c973ab7c7b820244b6f72efd3b56570ae
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43047
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For historical reasons, Windows has issues with certain names being
used for files and directories, 'con' or 'CON' being one of
them. Therefore, rename the pmc_mux/con driver to pmc_mux/conn in
order to work around this issue.
TEST=built volteer (only user of this driver as of now)
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ia78dc4efe647c96a7169a3b95fc3b8944d052c83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43090
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Fix a typo to use CONFIG_DISPLAY_HOBS instead of CONFIG_DISPLAY_HOB.
Build hob display into romstage, in addition to ramstage.
Memory map HOB data is a big structure. Update the soc_display_memmap_hob()
to assist trouble shooting of FSP interface.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: Iece745fe21d11b4a470ba8318201bb6e68c5da26
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42841
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a new LB_TAG_PLATFORM_BLOB_VERSION for FSP version, it would
add Intel FSP version to coreboot table LB_TAG_PLATFORM_BLOB_VERSION
when PLATFORM_USES_FSP2_0 is selected.
Tested=On OCP Delta Lake, with an updated LinuxBoot payload cbmem utility
can see "LB_TAG_PLATFORM_BLOB_VERSION": "2.1-0.0.1.120"
Change-Id: I92a13ca91b9f66a7517cfd6784f3f692ff34e765
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41809
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
These changes are in accordance with the documentation:
[*] page 208-209
Intel(R) 64 and IA-32 Architectures, Software Developer’s Manual,
Volume 4: Model-Specific Registers. May 2019.
Order Number: 335592-070US
Tested on OCP Tioga Pass and Delta Lake.
Change-Id: I8c2eac055a065c06859a3cb7b48ed59f15ae2fc4
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42901
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It's necessary to run IPMI commands in romstage for writing error SEL
such as memory initialization error SEL, and also for other usages
such as starting FRB2 timer, OEM commands, etc.
Add CONFIG_BMC_KCS_BASE for BMC KCS port address that can be used
across romstage and ramstage.
Change-Id: Ie3198965670454b123e570f9056673fdf515f52b
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40234
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
A UPD HybridStorageMode allows a platform to dynamically configure the
PCIe strap configuration required if an Optane device is connected.
The strap configuration is done by HECI commands between FSP and CSE to
override the default PCIe strap value, and the updated strap value is
stored in SPI RW data to be used on the next boot.
CSE Lite supports the strap override when running on CSE RW partition,
while CSE RO partition does not support it because CSE RO is not allowed
to access SPI RW data. The strap override failure on CSE RO causes FSP
not initializing PCH Clkreq and PCIe port mapping and this results NVMe
and Optane initialization failure.
By disabling HybridStorageMode in case of CSE RO boot, NVMe detection is
done by the default PCIe configuration and Optane is detected as a
single NVMe storage device on CSE RO boot in recovery mode. Both NVMe
and Optane devices detection as well as OS installation to these storage
devices are verified on CSE RO boot in recovery mode.
BUG=b:158643194
TEST=boot and verified with tglrvp and volteer in recovery mode
Cq-Depend: chrome-internal:3100721
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Change-Id: I5397cfc007069debe3701bf1e38e81bd17a29f0c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42282
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The eSPI polarity macros were reversed. Those are fixed so adjust
the corresponding values related to the correct expectations of
the IRQ path: eSPI virtual wire IRQs are active level high. The EC
sends active level high virtual wire IRQs. The default interrupt
encodings in ACPI for P2/S devices are active edge high. Therefore,
there is no need to override anything.
BUG=b:157984427
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ia28d82cd9e432df98839f68bac4eae4447455e53
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43011
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
eSPI interrupts are active level high. The eSPI polarity register
in the chipset inverts incoming signals if the corresonding bit
is 0 in the register. Therefore, all active high (edge or level)
virtual wire interrupts need to ensure they are not inverted.
And really the sender of the interrupts should be conforming to the
the eSPI spec. As such inverting any signals should not be necessary,
but this register in the chipset allows for fixing up those misbehaviors.
BUG=b:157984427
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I7346bb0484506d96d7ab2e6d046ffa0571683a48
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43010
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Originally, there was problem with PC Engines apu1 platform
which returned serial number value as -64. It was caused by wrong
value of dev->bus->secondary.
Source of the problem is in Porting.h header file. It contains
'#pragma pack(1)' which affects struct device. As mainboard.c
uses different binary layout because of this attribute,
reference dev->bus->secondary lands at wrong memory address.
This patch reorder includes and put <AGESA.h> and <AMD.h>
at the end of list, making struct device consistent.
As a result bus number value in device's structure is correct
and hence serial number.
TEST=`dmidecode -t 2` command in Linux Debian
Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com>
Change-Id: I5e8690d100b38ac7889395d375c0ff32bdefda0b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42512
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reflow lines, correct coding style and align struct members, among
other things. As raminit is very large, handle it on a follow-up.
Tested with BUILD_TIMELESS=1, packardbell/ms2290 does not change.
Change-Id: I343edf1bc2a5ac20ff0aa6de4486e685ce430737
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42701
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change moves the generation of I2SM ACPI device from static asl
file to runtime generation by ACP device driver. dmic_select_gpio is
set to match version 3+ of Trembyle and Dalboz schematics. In order to
maintain backward compatibility, dmic_select_gpio is updated at
runtime using variant_audio_update for board versions that are prior
to version 3 of reference schematics.
The only difference from static generation is that the device I2SM is
added under ACPD (i.e. ACP device) instead of CREC (Chrome EC
device). It does not make any functional difference from the kernel
perspective.
BUG=b:157603026
TEST=Verified that the following device gets generated in SSDT:
Scope (\_SB.PCI0.PBRA.ACPD)
{
Device (I2SM)
{
Name (_HID, "AMDI5682") // _HID: Hardware ID
Name (_UID, One) // _UID: Unique ID
Name (_DDN, "I2S machine driver") // _DDN: DOS Device Name
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
"\\_SB.GPIO", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x000D
}
})
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */,
Package (0x01)
{
Package (0x02)
{
"dmic-gpios",
Package (0x04)
{
\_SB.PCI0.PBRA.ACPD.I2SM,
Zero,
Zero,
Zero
}
}
}
})
}
}
Verified audio via speakers and mic input.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I5d1602c7f719eef9487ddea68e429d27408f9a76
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2253638
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42971
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
As per ACPI spec, GpioIo does not have any polarity associated with
it. Linux kernel uses `active_low` argument within GPIO _DSD property
to allow BIOS to indicate if the corresponding GPIO should be treated
as active low. Thus, if GPIO has active high polarity or if it does
not have any polarity associated with it, then the `active_low`
argument is supposed to be set to 0.
Having a `polarity` field in acpi_gpio seems confusing because GPIOs
might not always have polarity associated with them. Example, in case
of DMIC-select GPIO where 0 means select DMIC0 and 1 means select
DMIC1, there is no polarity associated with the GPIO. Thus, it would
be clearer for mainboard to use macros without having to specify a
particular polarity. In order to enable mainboards to provide GPIO
information without polarity for GpioIo usage, this change also adds
`ACPI_GPIO_OUTPUT` and `ACPI_GPIO_INPUT` macros.
BUG=b:157603026
Change-Id: I39d2a6ac8f149a74afeb915812fece86c9b9ad93
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42968
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change adds helper macros for initializing acpi_gpio fields
for GpioIo/GpioInt objects. This allows dropping some redundant code
for each macro to set the structure fields.
Change-Id: Id0a655468759ed3035c6c1e8770e37f1275e344e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42967
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Proposal for gpio_regulator usage in ACPI never got accepted upstream
for Linux kernel. So, the gpio_regulator driver in coreboot remains
unused. This change drops this unused driver.
Change-Id: Ia1e0ae4f955b9ffc8346d957f755499419d8cbc7
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42966
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The ACPI code was not masking off the correct bits for publishing
the SPI bar to the OS.
It resulted in a dmesg messagelike:
system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
And /proc/iomem entry
fec10002-fec11001 : pnp 00:00
These addresses are wrong because they are including bits of a
register that are not a part of the address.
Moreover, the code does not publish the eSPI register area either.
The eSPI registers live at 0x10000 added to the SPI bar. Lastly,
both regions are less than a page so only report a page of usage
for each.
Stoney Ridge's SPI bar register defines the address as 31:6 while
Picasso's SPI bar register defines the address as 31:8. Use Picasso's
valid mask for both cases because no one is assigning addresses
that are aligned to less than 256 bytes.
With the fixes, dmesg reports:
system 00:00: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:00: [mem 0xfec20000-0xfec20fff] has been reserved
And /proc/iomem indicates:
fec10000-fec10fff : pnp 00:00
fec20000-fec20fff : pnp 00:00
BUG=b:160290629
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I130b5ad26d9e13b44c25fbb35a05389f9e8841ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42959
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* Add support for Sphinx 3.0+
* Add backward support for Sphinx 1.8 and older
* Make sphinxcontrib ditaa an optional extension
* Allow SPHINXOPTS to be set from command line
* Add sphinx and sphinx-lint to top level Makefile
Change-Id: If10aef51dc426445cb742aad13b19ee7fe169c51
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41492
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently, EC wake signal (GPIO_24) is configured early on in
romstage. However, there is no need for that since EC wake is not
really required to be configured until ramstage. This change moves
GPIO_24 configuration to happen in ramstage.
BUG=b:159832123
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I6949dcd7c866df2fa028c7b2e7f347cec988e309
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42952
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change updates the pad configurations for wake lines as
follows:
1. Pen eject wake signal needs to be configured as PAD_WAKE i.e. wake
using GPIO controller block. This is because pen eject signal is not
dual routed and the trigger filtering is set by the kernel driver
differently for S0 and S3 wake. Hence, it cannot use SCI GEVENT and
instead has to fall back to using GPIO controller wake.
2. All other wake signals (EC, trackpad, fingerprint) need to be
configured as SCI. This allows OS to enable/disable wake from these
sources if required. Example: powerd disables wake from trackpad when
in tablet mode. Hence, all other wake sources use SCI.
BUG=b:159832123
TEST=Verified wake using pen eject and EC.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Id8cd5926f223db51a689ed8948040b8070cf1680
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42951
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently, northbridge BARs are 32-bit values. We don't have any use
case for BARs above 4 GiB in early stages, so handling possibly 64-bit
values seems unnecessary, which currently is a noisy way to write zero.
Tested with BUILD_TIMELESS=1, packardbell/ms2290 remains identical.
Change-Id: I93d1740b961f6a5962757d9a1e960b3f1014a0c6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This function was copy-pasted, comments included, from Sandy Bridge.
However, it is only called with 0x0044 as the northbridge's PCI ID.
Therefore, `bridge_silicon_revision() & BASE_REV_MASK` will always
evaluate to 0x40, which never equals `BASE_REV_SNB`, that is, 0x00.
As the condition is always false, treat this code as dead and drop it.
Following a similar reasoning, all direct comparisons against SNB
steppings will always be true, because `bridge_silicon_revision()`
returns at least 0x40 which is always larger than either `SNB_STEP_D0`
or `SNB_STEP_D1`. So, drop all but the code path that is actually used.
Change-Id: I5219a6af3df98ed77c9c4abfb9a63c2ebf8171bb
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
When building a configuration that requires futility (e.g. Chrome OS
builds), pkg-config and libcrypto are required. Since vboot's build
system isn't the most helpful about it, test ourselves and fail out
with some actionable message.
Tested:
- configs that don't need futility don't test for pkg-config, so it's
not required for them.
- failing pkg-config test leads to the message
- working pkg-config test leads to a successful build
Fixes https://ticket.coreboot.org/issues/242
Change-Id: I103ce5115284352e0a3a7fdcf8b427f56ce15ba7
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Vboot determines openssl through pkgconfig, so pointing its build
system to /bin/true makes the build not break unless it needs to use
valid information about openssl.
Vboot's use of openssl is only for some special features, mostly around
PKCS key format parsing and not needed by cbfstool. While cbfstool
can link vboot, it can't link with openssl because openssl's license
is deliberately incompatible with the GPL.
Change-Id: Ia3825f9625a1964d7cefc47ab3c3a8250ceefafb
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
A late change went into v3+ of reference schematics which inverted
EN_PWR_WIFI to meet PCIe reset/power timings for WiFi device. This is
incorporated into v3.51+ for Trembyle reference and v3.2+ for Dalboz
reference. However, some variants are built with v3+ reference
schematics, but without the inversion of EN_PWR_WIFI polarity. Thus,
we need to add support for following combinations:
1. Pre-v3 Schematics
2. V3+ Schematics
3. V3+ Schematics + Active low wifi power
This change adds a new Kconfig
`VARIANT_MIN_BOARD_ID_WIFI_POWER_ACTIVE_LOW` that sets the minimum
board ID that has EN_PWR_WIFI active low in hardware. Variants that
missed this change in V3+ integration (berknip and vilboz) have board
IDs set to VARIANT_MIN_BOARD_ID_V3_SCHEMATICS + 1. For others, this
defaults to VARIANT_MIN_BOARD_ID_V3_SCHEMATICS.
BUG=b:159749536
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ib8da7fba5f4a518a51b203d6a01a9551e261d8b6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42938
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change moves variant_sleep_gpio_table() definition to dalboz and
trembyle references to allow each to make their own changes.
BUG=b:159749536, b:159453643
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I15b19cea05f1a540c56b6bc0507306d2348ac17f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42937
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change moves PCIE_RST1_L deassertion to happen as part of
variant_pcie_power_reset_configure() instead of
variant_romstage_entry() since romstage is guaranteed to run 100ms+
after PP3300_NVME is enabled. This is one of the first things that
coreboot on x86 does as part of early mainboard configuration.
Additionally, this change also drops deassertion of PCIE_RST0_L on bid
1 for dalboz since PCIE_RST0_L is already deasserted much earlier in
the boot flow.
BUG=b:152582706
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ib734aa6ff664268e68388b1997ddce676504f8d2
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2261996
Reviewed-by: Aaron Durbin <adurbin@google.com>
Commit-Queue: Aaron Durbin <adurbin@google.com>
Tested-by: Aaron Durbin <adurbin@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42936
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change configures PCIE_RST1_L as GPO driven low on the sleep
path. This is required to keep PERST# asserted to devices until
coreboot deasserts it on S3 resume path. Without this change, on S3
resume, PCIE_RST1_L gets deasserted sooner than required resulting in
violation of PCIe reset timings.
With this change, the behavior of PCIE_RST1_L is as follows:
1. GPIO27 is configured as NF (PCIE_RST1_L) in coreboot
bootblock/romstage and driven high.
2. On S3 entry, GPIO27 is configured as GPO driven low.
* Boot out of G3: Timing should be met since GPIO_27 is pulled down by
default until coreboot configures it.
* S3 resume: Timing should be met since GPIO_27 is configured as GPO
low and it retains state across S3 entry/exit. So, should be low
until coreboot configures it.
* Warm reset: Timing should be met since it is configured as NF. So,
hardware guarantees the reset timing as seen in "warm reset.jpg" in
#46.
BUG=b:152582706
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ia0ad1522edc438fd054d927ef4a2ab5c27329c00
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2261116
Reviewed-by: Aaron Durbin <adurbin@google.com>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This is a W/A to avoid a communication issue with CSE Lite over Heci
interface. This will help to avoid boot failures with CSE Lite until
the permanent fix is available.
BUG=b:159884143
TEST=build and boot volteer with serial and non-serial image
Change-Id: Ib136a2154b36c63c7147bbcfbf1ca7beac3a5685
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42790
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update fixes build issues with host GCC 10.
Other changes:
https://acpica.org/node/177https://acpica.org/node/178https://acpica.org/node/179https://acpica.org/node/181
acpinames utility removed:
"Removed support for the acpinames utility. The acpinames was a simple
utility used to populate and display the ACPI namespace without executing
any AML code. However, ACPICA now supports executable opcodes outside of
control methods. This means that executable AML opcodes such as If and
Store opcodes need to be executed during table load. Therefore, acpinames
would need to be updated to match the same behavior as the acpiexec
utility and since acpiexec can already dump the entire namespace (via the
'namespace' command), we no longer have the need to maintain acpinames."
Change-Id: Ibd995561ca53458b04f87cee5693850c0d90d3d6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38907
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
in some m/b+BOE panel(G2 TS), G2 TS may still have chance to lost even
rst delay time already meets spec definition: 10us (minimum).
Restore G2 TS RST delay time to 50ms, we could have G2 TS working fine
on those specific m/b+BOE(G2 TS) panel.
BUG=b:159510906
BRANCH=master
TEST=emerge-zork coreboot
boot with G2 TS, make sure G2 TS is functional
Change-Id: Ic629c6c61572ab564def8893ce8d78dfb37d4590
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This change adds Platform-Wide _OSC capabilities for native USB4
support. There is Engineering Change Request (ECR) with _OSC addition
for OSPM USB support. ACPI section 6.2.11.1.13 is modified with bit 18
as native USB4 support. The OS sets this bit to indicate support for
an OSPM-native USB4 Connection Manager which handles USB4 connection
events and link management. The OS use the _OSC mechanism and the bit
defined in this ECR to obtain configuration and connection management
capabilities of USB4 connections. This change also fixs the byte index
for the DWord-addressable field CDW3 from the capabilities buffer.
BUG=b:140645231
TEST=Check Type C device all ports connection/enumeration with SW CM.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I1b561ea5a0a6b440cca3152cc150f31abf7766ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42821
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
due to overridetree.cb set disable_xhci_lfps_pm = 0,
need correct condition expression to let function work.
BUG=b:155955302
BRANCH=octopus
TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash
the image to the device. Run following command to check if
bits[7:4] is set 0:
>iotools mmio_read32 "XHCI MMIO BAR + 0x80A4"
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Change-Id: Ia047c75611a35aafd15f2481bf64049e13d4a2ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42860
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The current implementation of acpi_dp_write() frees the node after it
has written it.
If the structure contains a ACPI_DP_TYPE_CHILD then a recursive call to
acpi_dp_write() frees the child and then frees it again when returning
from the call. This results in a double free.
Split the implementation into two steps, one that ones and one that
frees. This is easier to understand and fixes the bug.
Note: This likely has no effect in coreboot since it doesn't seem to
have a proper free() implementation. But it might gain one one day.
BUG=none
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: Ife3917af10bc35a3c3eee38d8292f927ef15409d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42892
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change clears interrupt and wake status for a pad when
configuring it. This ensures that stale interrupts/wake notifications
are flushed out and do not cause spurious wakes in future suspends.
BUG=b:159944426
Change-Id: Ia4ebd975312a4136f1d0690d7af7372615e31f0f
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42877
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
`flags` field of soc_amd_gpio structure is set only for SCI and SMI
configurations. This change adds a new helper macro
PAD_CFG_STRUCT_FLAGS that allows setting of all soc_amd_gpio members
including `flags` field. This can be used directly by PAD_SCI and
PAD_SMI. For all other pad configurations, PAD_CFG_STRUCT macro uses
PAD_CFG_STRUCT_FLAGS with flags set to 0. This allows dropping of
redundant parameter 0 for flags for all other pad configurations.
BUG=b:159944426
Change-Id: I835b62f5502375ffc4215548b51338a67546d699
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42876
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently, for Stoneyridge and Picasso mainboards, pads that are
configured for SCI/SMI/WAKE need to have multiple entries in the
configuration table - one for PAD_GPI and other for the special
configuration that is required. This requires a very specific ordering
of pads within the table and is prone to errors because of conflicting
params provided to the different entries for the same pad. This also
does not work very well with the concept of override GPIOs where the
entry in base table is overridden with the first matched entry from
the override table.
This change updates the way GPIO configuration is handled for special
routing like SCI/SMI/WAKE/DEBOUNCE by setting the control field of
soc_amd_gpio structure in the macros performing these
configurations. Also, program_gpios() is updated to perform a write to
GPIO control register instead of read-modify-write. This is because
mainboard is expected to provide only a single configuration entry for
each pad within a given table. Thus, there is no need to preserve
earlier configuration.
Mainboards that were providing multiple entries for a single pad are
updated accordingly.
BUG=b:159944426
Change-Id: I3364dc2982d66c4e33c2b4e6b0b97641ebea27f0
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42875
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some codepaths want to set selected bits of a hardware register
to match those of a given variable in memory. Provide a helper
function for this purpose and use it in gpio_set(),
gpio_input_pulldown() and gpio_input_pullup().
This change also adds GPIO_PULL_MASK and updates GPIO_OUTPUT_MASK to
include all bits dealing with pull and output respectively.
Change-Id: I4413d113dff550900348a44f71b949b7547a9cfc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change adds helper macro PAD_CFG_STRUCT for setting the fields
of `soc_amd_gpio`. Additionally, macros are added for different
operations i.e. pull, output, trigger, int_enable, event_trigger,
wake_enable, debounce, etc. All GPIO configuration macros are updated
to use PAD_CFG_STRUCT instead of setting the fields directly.
BUG=b:159944426
Change-Id: I03535d2da0c05f72c4163fa30d72f9c6df44908b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42872
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change renames GPIO macros as follows:
1. Pad filtering macros are renamed to GPIO_TRIGGER_ and
GPIO_ACTIVE_. This determines the filtering applied on the input
signal at the pad.
2. Interrupt enabling macros are renamed to GPIO_INT_ENABLE_.
_INT_ is dropped from pad filtering macros because the filtering
applies to the input signal irrespective of how it is routed. It is
applied at the pad not only for GPIO interrupts but also for other
routes i.e. SCI, SMI, etc.
BUG=b:159944426
Change-Id: Id0ad770be77409aaaae4cc135945e2815ce97030
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42870
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
`soc_amd_gpio` structure uses a flag field to store additional
information about GPIO configuration that does not end up directly in
the GPIO control register. However, the naming for these flags is not
consistent across event triggers and special configurations. This
change updates the flag names to be consistent (starting with
GPIO_FLAG_*) and adds some helper functions for GPIO events.
In the following CLs, more changes will be made to drop some of the
special flags which are not really required.
BUG=b:159944426
Change-Id: Idca795c3e594eb956d297d5ba5d08f75b5563ee5
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42869
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In some rare cases it seems that make tries to build
$(objgenerated)/assembly.inc before the build-dirs target has finished,
and so assembly.inc can't be written. Enforce that build-dirs is done
before assembly.inc starts.
BUG=chromium:1098215
BRANCH=none
TEST=none
Change-Id: Ib141ea45a43836cfdde0059523c331fe5286b06d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Align support for enable wake-on-usb attach/detach as was
introduced in Skylake in
`commit 3bfe3404df32ca226c624be0435c640bf1ebeae7`.
This adds the USB Wake Enable Setup (UWES) ASL blocks
required to inform the OS about plug wake events bits
being set in the PORTSCN register configured by devicetree.
BUG=b:159187889
BRANCH=none
TEST=none
Change-Id: I6c63d226e5acadff04486c8a6764fb715a0ac051
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This enables Thermal Control Circuit (TCC) activation feature to set
tcc_offset value to new value in devicetree.
BUG=None
BRANCH=None
TEST=Built for dedede platform and verified the MSR value
Change-Id: I58e4fa362f20efeef84e06e64d70ee7c4f9554d6
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This enables Thermal Control Circuit (TCC) activation feature to set
tcc_offset to new value in devicetree.
BUG=None
BRANCH=None
TEST=Built for volteer platform and verified the MSR value.
Change-Id: I36b0d6aad4be8a9cbb145dcd66d65235d3f6ac35
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42513
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Commit 0013623 (mb/google/dragonegg: remove abandoned project) dropped
this mainboard because it is no longer in development nor used. However,
the associated documentation remained. Rest in pieces, Dragonegg. ;-;
Change-Id: Idd2ee716717132ba3fa237ae97f34686007d3685
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42858
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch adds a separate blobs repository for Qualcomm blobs,
analogous to the existing AMD blobs. Qualcomm's binary licenses allow
files to be redistributed and used by anyone, but they explicitly
require the user to agree to the license terms when just *downloading*
the binary (even if they're not using them to build any firmware). Some
community members do not like to have to agree to licenses for files
they're not actually using, so we are keeping these files separate from
the main blobs repository and adding an extra Kconfig to make sure the
user is aware of and must explicitly agree to this before downloading
these files.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I247746c1b633343064c9f32ef1556000475d6c4a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42548
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add CpuReplacementCheck to chip options to control UPD FSPM
SkipCpuReplacementCheck from devicetree.
This UPD allows platforms with soldered down SoC to skip CPU
replacement check to avoid a forced MRC traning.
TEST=boot and verified with volteer
Change-Id: Ic5782723ac3a204f2af657fac9944fb41fc03f4d
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42788
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Coverity detects dereferencing pointers that might be "NULL" when
calling acpigen_write_scope and acpigen_write_device. Add sanity
check for both of scope and name to prevent NULL pointer dereference.
Found-by: Coverity CID 1429981
TEST=Built and boot up to kernel.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Iea3801585e8c294fb889a8137b534bb932696025
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42836
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Coverity detects dereferencing pointers that might be "NULL" when
calling acpigen_write_scope and acpigen_write_device. Add sanity
check for both of scope and name to prevent NULL pointer dereference.
Found-by: Coverity CID 1429979, 1429982
TEST=Built and boot up to kernel.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: If17d12861f562dc0d6c98a5c91a9d3c0360ca2c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42835
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
A follow-up patch will add Cereme which is a Mandolin variant.
Beware that the name of the EC firmware image is changed from mchp.bin
to EC_mandolin.bin.
TEST=Mandolin still boots into Linux live system.
Change-Id: Ifee91306756f8a4152a6a0224e172dae7eac8f7a
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42785
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Although on ThinkPads with Panther Point PCH the usb port inside wwan
socket is usually wired to XHCI, it has actually no SuperSpeed lines,
so maybe it is okay to disable SuperSpeed capabilities, and wire them
to EHCI #2 by making use of XUSB2PRM and USB3PRM.
This applies to both variants of x230.
Change-Id: Ia8d27be84e4dbfa0efed506b9fc010e7f4d6ba23
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41505
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The code is based on autoport and that for X230. Major differences are:
- Only one DDR3 slot
- HM77 PCH
- M.2 socket instead of mini PCIe
- No docking
- No TPM
Tested:
- CPU i5-3337U
- 8GiB SO-DIMM
- Camera
- PCIe and USB2 on M.2 slot with A key for WLAN
- SATA and USB2 (no SuperSpeed components) on M.2 slot with B key for WWAN
- On board SDHCI connected to PCIe
- USB3 ports
- libgfxinit-based graphics init
- NVRAM options for North and South bridges
- Sound
- ThinkPad EC
- S3
- Linux 4.9 within Debian GNU/Linux stable, loaded from SeaBIOS.
Untested:
- Touch screen, which is said to work under ubuntu but not debian.
Change-Id: Id59cdc5479aaf70809dd1ca613056263661455eb
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41390
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
pmc_set_acpi_mode() should run after Chrome EC dealt with all host event
bits, like SMI mask (otherwise the FAFT firmware_FWScreenCloseLid test
will fail).
BUG=b:153249055
TEST=FW_NAME=malefor emerge-volteer coreboot chromeos-bootimage
Change the GBB flag to 0x140 then check SMI mask during depthcharge
phase, make sure it's 0x0000000000000001.
Signed-off-by: William Wei <wenxu.wei@bitland.corp-partner.google.com>
Change-Id: Icfff5cc5550f23938343e4d26ef76093bb9cf7c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42677
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The previous Intel CPX-SP FSP release was ww20 release.
The ww22 release fixs issues related to FSP_NV_STORAGE HOB. The end of end
flow of using memory training data to generate FSP_NV_STORAGE HOB and
using memory training data passed from bootloader to skip memory
training, works now. This saves 8 minutes of boot time (with FSP verbose
logging enabled on DeltaLake server).
This release also adds UPD parameters to support IIO bifuration.
The ww24 release has following updates:
a. Removed a number of unnecessary UPD parameters, such as mmiolSize,
mmiolBase, OemHookPostTopologyDiscovery, OemGetResourceMapUpdate.
b. Added UPD parameters to support PCIe ports configuration.
c. Updated IIO_UNIVERSAL_DATA HOB, each stack now has mmio base/limit
fields, in addition to PCIe resource memory base/limit fields.
With ww24 release, the issue with PCIe link training persists. On YV3
config A, the onboard NIC card has x4 connection to port 2D. This
NIC device is not recognized by FSP.
Corresponding soc/intel/xeon_sp/cpx change is made:
* There are changes in PLATFORM_DATA structure, so hob_display.c
is updated.
* There are changes in UPD parameters, so romstage.c is updated.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I70762b377a057d0fca7806f485cce8d479fb5baa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41903
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fix potential overflow when multiplying integers in transform_vector().
This issue is causing the absolute coordinate of the bottom right corner
of the box to be incorrectly calculated for draw_rounded_box(), which is
used in menu UI to clear the previous screen.
In addition, check the lower bound in within_box().
BRANCH=none
BUG=b:146399181, b:159772149
TEST=emerge-puff libpayload
TEST=Previous screen is cleared properly for menu UI
Change-Id: I57845f54e18e5bdbd0d774209ee9632cb860b0c2
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42770
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If VPD_SMBIOS_VERSION is selected, it would read VPD_RO variable that can
override SMBIOS type 0 version.
One special scenario of using this feature is to assign a BIOS version to
a coreboot image without the need to rebuild from source.
VPD_SMBIOS_VERSION default is n.
Tested=On OCP Delta Lake, dmidecode -t 0 can see the version being updated
from VPD.
Change-Id: Iee62ed900095001ffac225fc629b3f2f52045e30
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: insomniac <insomniac@slackware.it>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This enables to configure the Thermal Control Circuit (TCC) activation
value to new value as tcc_offset in degree Celcius. It prevents any
abrupt thermal shutdown while running heavy workload. This helps to
take early thermal throttling action before CPU temperature reaches
maximum operating temperature TjMax value. Also, cleanup local functions
from previous intel soc specific code base like for apollolake, broadwell,
skylake and cannonlake.
BUG=None
BRANCH=None
TEST=Built for volteer platform and verified the MSR value.
Change-Id: I37dd878902b080602d70c5c3c906820613ea14a5
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41855
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This also makes the calling of the eMMC GPIO mux setup function
conditional on PICASSO_LPC_IOMUX instead of AMD_LPC_DEBUG_CARD which
only makes the selection of PICASSO_LPC_IOMUX user-configurable.
Change-Id: Ic49a668f82fbc1b851c07d312b543d2889fe4734
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42842
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Both Dali and Pollock chips have less PCIe, USB3 and DisplayPort
connectivity. While Dali can either be fused-down PCO or RV2 silicon,
Pollock is always RV2 silicon.
Since we have all boards using this code in tree right now,
soc_is_dali() can be renamed and generalized to soc_is_reduced_io_sku().
Change-Id: I9eb57595da6f806305552128b0c077ceeb7c4661
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42833
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change allows mainboard to configure different wakeup routes that
can be used by a GPIO key:
1. SCI: This is selected when SCI route is used to wake the system. It
results in _PRW property being exposed in ACPI tables.
2. GPIO IRQ: This is selected when GPIO controller wake is used to
wake the system. It is typically used when the input signal is not
dual routed and the GPIO controller block is not capable of applying
filters for IRQ and wake separately. In this case, _PRW is not exposed
in ACPI tables for the key device.
3. Disabled: No wakeup supported.
Based on these wakeup routes, gpio_keys_add_child_node() is updated to
expose _PRW and _DSD properties for wakeup appropriately.
Additionally, the change updates mainboards that were already using
gpio_keys to set wakeup_route attribute correctly and renames "wake"
to "wake_gpe" to make the usage clear.
BUG=b:159942427
Change-Id: Ib32b866b5f0ca559ed680b46218454bdfd8c6457
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
All Intel southbridges with SPI perform this write. Put it inside a
function in common code. Use a different name to avoid a name clash.
As it is only one statement, make it inline so that it can be defined
on the header itself. It is only called once per southbridge anyway.
Change-Id: I3c284d6cffd22949d50b4c4f9846ceaef38d7cda
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42660
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
This reverts commit 1408798637.
Reason for revert: Causing backlight issues in device. Will reland after more debugging to figure out the root cause.
BUG=b:159370566
BRANCH=None
TEST=boot up device and make sure when kernel is booted, backlight comes up.
Change-Id: I643854c6c805d262539bbb482808e8c322059a49
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42583
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Currently, Reset Power Cycle Duration is set with default value (4s).
This adds around ~5 seconds of delay during power cycle or global reset.
So, this patch sets PchPmPwrCycDur (Reset Power Cycle Duration) to 1s
to minimize the delay.
Delay with Power Cycle or Global Reset:
Existing behaviour:
S0->S5 -> [ ~5 seconds delay ] -> S5->S0
With the patch:
S0->S5 -> [ ~2 seconds delay ] -> S5->S0
Also, correct the comment mentioned for PchPmSlpAMinAssert.
The value(3) defined for PchPmSlpAMinAssert triggers signal assertion width
to 98ms not 2s.
Test=Verified on Hatch and Puff boards
BUG=b:158634281
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I368c6716a92e06903a872f9e87ae0698eab95bdd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42441
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This is to enable Intel ME communication interface HECI1 by
devicetree for PAVP with CSE Lite.
BUG=b:159615125
TEST=Build and boot volteer. Run lspci and check pcie device
00:16.0 Communication controller: Intel Corporation Device a0e0
Change-Id: I68eb51c6a0af77982c060767993265764a2bc926
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42308
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This reverts commit 4883252912.
Almost everything in <amdblocks/acpimmio_map.h> is invalid for PSP as
it does not have the same view of memory space.
The prototypes xx_set/get_bar() are only valid for PSP as x86 cores
will use the constant mapping defined in <amdblocks/acpimmio_map.h>
The selected MMIO base address model depends of the architecture the
stage is built for and, to current knowledge, nothing else. So
the guards should have been with ENV_X86 vs ENV_ARM and not about
CONFIG(VERSTAGE_BEFORE_BOOTBLOCK).
For the ENV_ARM stage builds, <arch/io.h> file referenced in the
previously added mmio_util_psp.c file has not been added to the tree.
So there was some out-of-order submitting, which did not get caught
as the build-testing of mixed-arch stages has not been incorporated
into the tree yet.
The previously added file mmio_util_psp.c is also 90% redundant with
mmio_util.c.
Change-Id: I1d632f52745bc6cd3c3dbddb1ea5ff9ba962c2e8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42486
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add PchPmPwrCycDur to chip options to control the UPD FSPS PchPmPwrCycDur
from devicetree. The UPD determines the minimum time a platform will stay
in reset during host partition reset with power cycle or global reset.
This patch also ensures configured PchPmPwrCycDur value doesn't violate
the PCH EDS specification.
TEST=Verified on Hatch and Puff boards
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I55e836c78fab34e34d57b04428a1498b7dc7174b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42440
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Not all FSPs based on FSP 2.1 supports the feature of external PPI
interface pulled in via FSP_PEIM_TO_PEIM_INTERFACE.
Deselect FSP_PEIM_TO_PEIM_INTERFACE when PLATFORM_USES_FSP2_1 is
selected.
Update Kconfig of SOCs affected (icelake, jasperlake, tigerlake).
Change-Id: I5df03f8bcf15c9e05c9fd904a79f740260a3aed7
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42487
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
This patch includes (edk2/edk2-stable202005) all required headers
for edk2-stable202005 quarterly EDK2 tag from EDK2 github project
using below command:
>> git clone https://github.com/tianocore/edk2.git vedk2-stable202005
Only include necessary header files.
MdePkg/Include/Base.h was updated to avoid compilation errors through
safeguarding definitions for MIN, MAX, NULL, ABS, ARRAY_SIZE.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I3172505d9b829647ee1208c87623172f10b39310
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42239
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Chrome OS ACPI code has always used a legacy PNP ID "GGL0001" for
the ID. This is technically valid but we have an official ACPI ID
now so I allocated "GOOG0016" for an ID and we can eventually retire
the legacy PNP ID.
This is being discussed on LKML as part of an effort to upstream the
Chrome OS ACPI kernel driver: https://lkml.org/lkml/2020/4/13/315
Change-Id: I2e41fe419113b327618f8f98058ef7af657f2532
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42735
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
For type 3, override chassis asset_tag_number with smbios_mainboard_asset_tag()
and add two functions that can override chassis version and serial_number.
For type 4 add smbios_processor_serial_number() to override serial_number.
Tested on OCP Tioga Pass.
Change-Id: I80c6244580a4428fab781d760071c51c7933abee
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40309
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Implemented according to IPMI "Platform Management FRU Information
Storage Definition" specification v1.0 for reading FRU data Chassis
Info Area.
Tested on OCP Tioga Pass.
Change-Id: Ieb53c20f8eb4b7720bf1fe349e6aaebaa4c37247
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40306
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Support display of CPX-SP specific HOBs (when CONFIG_DISPLAY_HOBS
is selected, and UPD parameters (when CONFIG_DISPLAY_UPD_DATA is selected).
Such display is used for FSP debugging purpose. It adds small
amount of boot time.
Some UPD display log excerpts:
UPD values for SiliconInit:
0x04: BifurcationPcie0
0x03: BifurcationPcie1
Some HOB display log excerpts:
=== FSP HOBs ===
0x758df000: hob_list_ptr
0x758df000, 0x00000038 bytes: HOB_TYPE_HANDOFF
0x758df038, 0x00000028 bytes: HOB_TYPE_MEMORY_POOL
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com>
Change-Id: I42dd519103cc604d4cfee858f4774bd73c979e77
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41348
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change moves the configuration of PCIE_RST0_L as native
function to happen in early GPIO table. This ensures that the PERST#
signal is deasserted as soon as possible when the system comes out
of sleep state in case the sleep path asserted/deasserted the PERST#
as GPIO out.
A big difference in functionality with this change is that PCIE_RST0_L
signal is now configured as part of RO, which should be fine since
all PCIe devices have a second AUX_RESET_L signal or use PCIE_RST1_L
to control the actual reset to the device.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I21a9c25b5a8a6d502cdb79cbe0dbad6ef98d6d63
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42739
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change replaces variant_wifi_romstage_gpio_table() with
variant_pcie_power_reset_configure() to handle the reset and power
sequencing for WiFi devices pre- and post- v3 version of schematics.
These are the requirements that need to be satisfied:
1. As per PCI Express M.2 Specification Revision 3.0,
Version 1.2, Section 3.1.4 "Power-up Timing", PERST# should stay
disabled until `TPVPGL` time duration after device power has
stabilized. Value of TPVPGL is implementation specific.
2. For Intel WiFi chip, it is known to get into a bad state if the
above requirement is violated and hence requires a power cycle.
3. On pre-v3 schematics:
- For both dalboz and trembyle references, GPIO42 drives
WIFI_AUX_RESET_L which is pulled up to PP3300_WIFI.
- For both dalboz and trembyle references, PP3300_WIFI is controlled
using GPIO29. This pad gets pulled high by default on PWRGOOD
because of internal pull-up. But, at RESET# it is known to have a
glitch. When GPIO29 gets pulled high, it causes WIFI_AUX_RESET_L to
be pulled high as well. This violates the PCIe power sequencing
requirements. Hence, for pre-v3 schematics on both dalboz and
trembyle, following sequence needs to be followed:
a. Assert WIFI_AUX_RESET_L.
b. Disable power to WiFi.
c. Wait 10ms to allow WiFi power to go low.
d. Enable power to WiFi.
e. Wait 50ms as per PCIe specification.
f. Deassert WIFI_AUX_RESET_L.
4. On v3 schematics:
- For trembyle: WIFI_AUX_RESET_L is driven by GPIO86 which has an
internal PU as well as an external PU to PP3300_WIFI.
- For dalboz: WIFI_AUX_RESET is driven by GPIO29. This is active
high and has an internal PU. It also has an external 1K PD to
overcome internal PU.
- For both dalboz and trembyle references, PP3300_WIFI is
controlled by GPIO42 which has an internal PU and external
PD. Trembyle schematics have a comment saying strong PD of 2.2K but
the stuffed resistor is a weak one (499K). ON dalboz, it uses a
weak PD (which doesn't look correct and instead should be a strong
PD just like trembyle). Having a strong PD ensures that the WiFi
power is kept disabled when coming out of G3 until coreboot
configures GPIO42 as high.
- Thus, for v3 schematics, following sequence needs to be followed:
a. Assert WIFI_AUX_RESET{_L} signal.
b. Enable power to WiFi.
c. Wait 50ms as per PCIe specification.
d. Deassert WIFI_AUX_RESET{_L} signal.
BUG=b:157686402, b:158257076
TEST=Verified that QCA and AX200 cards both continue working. Tested
QCA on Dalboz and Trembyle. Tested AX200 on morphius.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I532131ee911d5efb5130d8710f3e01578f6c9627
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42738
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change updates variant_romstage_gpio_table() and
variant_wifi_romstage_gpio_table() to support v3 version of schematics
for dalboz and trembyle reference designs. gpio_set_stage_rom and
gpio_set_wifi are divided into two groups:
a) Pre-v3 (GPIO table for pre v3 schematics):
* gpio_set_stage_rom_pre_v3
* gpio_set_wifi_pre_v3
b) v3 (GPIO table for v3+ schematics):
* gpio_set_stage_v3
* gpio_set_wifi_v3
Currently, both _v3 is a copy of _pre_v3, but will be updated in
follow-up CLs to make it easier to identify what changed from _pre_v3
to _v3.
BUG=b:157088093, b:154676993, b:157098434, b:157165628, b:157744136, b:157743835
TEST=Compiles
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I444875d93100c2f2abdb6dec4312861fd89d9b78
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2251390
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42721
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change moves the GPIOs that need to be configured for early
access in coreboot to early_gpio_table[] in
gpio_baseboard_common.c. These GPIOs include:
* Pads to talk to EC
* Pads to talk to TPM
* Pads to talk to serial console
These should be configured in the first stage that runs coreboot
i.e. in case of VBOOT_STARTS_BEFORE_BOOTBLOCK, it should be done as
part of verstage (which starts on PSP), else it should be done as part
of bootblock (which is the first stage that runs on x86).
This change drops GPIO_137 from early_gpio_table since that is not
really required in early stages.
BUG=b:154351731
TEST=Verified that trembyle still boots.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ifbdbb02cbfc65ddb68f0ae75cf4b1f2ea1656b91
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2252709
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Align support for enable wake-on-usb attach/detach as was
introduced in Skylake in
`commit 3bfe3404df32ca226c624be0435c640bf1ebeae7`.
BUG=b:159187889
BRANCH=none
TEST=none
Change-Id: Ie63e4f1fcdea130f8faed5c0d34a6a96759946b6
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42716
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The host bridge's resources covering bus numbers assumed
256 buses were being decoded. However, MMCONFIG was only
covering 64 buses. This results in Linux complaining:
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000
[bus 00-3f] only partially covers this bridge
When retrieving the host bridge's resources fix up the
bus numbers to utilize MMCONF_BUS_NUMBER Kconfig. I couldn't
keep IASL from complaining when trying to do this statically.
BUG=b:158874061
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ief1901743e2c99f583ef0181490d493d23734f64
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
1) Based on malefor schematics, disable unused I2C port, USB port, TBT
PCIe
2) Add audio device to the tree
BUG=b:150653745, b:154973095
TEST=FW_NAME=malefor emerge-volteer coreboot chromeos-bootimage
Boot to kernel and check the devices' function worked properly.
Signed-off-by: William Wei <wenxu.wei@bitland.corp-partner.google.com>
Change-Id: I9ce465705e8b8f67ddbc9e4eb06c5a8bfac65fcb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42246
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Create the volteer2 variant of the volteer reference board by
copying the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.1.1).
Modified to alphabetize and update to duplicate latest volteer changes
currently in the review and merge pipeline.
Added the following missing files from the variants/volteer2/ folder:
- gpio.c
- include/variant/acpi/dptf.asl
- acpi/mipi_camera.asl
- Makefile.inc
- memory/dram_id.generated.txt
- memory/Makefile.inc
- memory/mem_list_variant.txt
- overridetree.cb
BUG=b:159135047
BRANCH=None
TEST=util/abuild/abuild -p none -t google/volteer -x -a
make sure the build includes GOOGLE_VOLTEER2
Change-Id: I987c72b83dc993af248a753a2caa56be0f26c1ad
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42605
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The dmesg shows unresolved symbol CDW1 with AE_NOT_FOUND error after
booting to kernel. Fix the error by properly creating the buffer field
CDW1 to cover all errors scenarios.
BUG=b:140645231
TEST=Verified no AE_NOT_FOUND error related to \_SB.OSC.CDW1.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Ibfe677f87736ce1930e06b9cd649791977116012
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42693
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Commit 9550e97 [acpi: correct the processor devices scope] changed
the default CPU scope from _PR to _SB, but the default prefix in
Stoneyridge's Kconfig was missed, leading to ACPI errors for
'AE_NOT_FOUND for object \_PR.P00n.' Fix the default prefix and
eliminate the errors reported in dmesg.
Test: boot Linux w/5.3 kernel on google/liara, check for errors
Change-Id: I5611b6836062a0a9f90036d7fe40cd98bd730af3
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42627
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Create the delbin variant of the volteer reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.1.1).
BUG=b:158797761
BRANCH=None
TEST=util/abuild/abuild -p none -t google/volteer -x -a
make sure the build includes GOOGLE_DELBIN
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Change-Id: Icf5fc6b9cc6a7c47e52103b2d396bcddb26adf50
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42709
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Create the wyvern variant of the puff reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.1.1).
BUG=b:158269582
BRANCH=None
TEST=util/abuild/abuild -p none -t google/hatch -x -a
make sure the build includes GOOGLE_WYVERN
Signed-off-by: Paul Fagerburg <pfagerburg@google.com>
Change-Id: Id7a090058d2926707495387f7e90b3b8ed83dac7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42551
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Create the faffy variant of the puff reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.1.1).
V.2: Manually modified to keep Kconfig sorted.
BUG=b:157448038
BRANCH=None
TEST=util/abuild/abuild -p none -t google/hatch -x -a
make sure the build includes GOOGLE_FAFFY
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Change-Id: I5f14c2d6144ce3c2e48488ca81f31b3c04dc5fb9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42717
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The assumption up to this point was that if the system had an x86
processor, verstage would be running on the x86 processor. With running
verstage on the PSP, that assumption no longer holds true, so exclude
pieces of code that cause problems for verstage on the PSP.
This change will add these files to verstage only if the verstage
architecture is X86 - either 32 or 64 bit.
BUG=b:158124527
TEST=Build and boot on Trembyle
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I797b67394825172bd44ad1ee693a0c509289486b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42062
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There are two touch screen controllers on the Palkia device.
One is on the lid; another is on the base. To support
the different control path (for example: turning off the base's
touch event when we don't want to use it however still keeping
the lid's touch event), we use the different gpio pins to control
the second touch. As a result, we need to modify the devicetree
to adopt this change. With this change, we can control the
primary and secondary touch screen controller respectively.
BUG=b:149714955
TEST=lid/base touch screen works correctly
Change-Id: I1f896e334e51c78300af724cbef8d57641ae5612
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42185
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Here we consolidate some of the mainboard.c duplication between
Puff and it's variants.
Customizations can be done later via introducing a devicetree
parameterisation.
BUG=b:154071868
BRANCH=none
TEST=none
Change-Id: I75c2de7ae8efd544d800bc77e34e667c3afa4b01
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42672
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Picasso's BERT region should not have been moved to cbmem in commit
901cb9c "soc/amd/picasso: Move BERT region to cbmem". This
causes an error of "APEI: Can not request [] for APEI BERT registers.
FSP has been modified to set aside a requested region size for BERT,
simiar to TSEG. Remove the cbmem reservation and locate the region
by searching for the HOB.
BUG=b:136987699
TEST=Check that BERT is allocated
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I20e99390141986913dd45c2074aa184e992c8ebb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42530
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For consistency with other Intel southbridges, we rename this function
to `i82801ix_lpc_setup`.
Tested with BUILD_TIMELESS=1, Roda RK9 does not change.
Change-Id: Id8b3bcc9174277e085868866a1b5d90b5c51201a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Having speparate types for the status register with three and four block
protection bits respectively doesn't really make sense, it's the same
size either way just a different representation, so one union type will
do.
This allows us to de-duplicate the status register read in
winbond_get_write_protection as well as removing another layer of union
in 'struct status_regs'.
Change-Id: Ie99b98fb6762c8d84d685b110cfc2fd5458b702e
Signed-off-by: Daniel Gröber <dxld@darkboxed.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42111
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove an unneccessary comment and group the variant_early_gpio_table
together based on GPIO group.
Changed static variable name gpio_table to override_gpio_table to be
more descriptive.
BUG=none
TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot
volteer to kernel.
Change-Id: Iabe810df1e5a3df35e3543ab81b9fdb6f76c223a
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42577
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move the following volteer-specific devices from baseboard's
devicetree.cb into volteer's overridetree.cb file:
- Goodix Touchscreen
- ELAN Touchscreen
- ELAN Touchpad
- SAR0 Proximity Sensor
Adjust the other variant's overridetree.cb files to correspond to
the changes made to the baseboard's devicetree.cb in this change.
BUG=b:159241303, b:154646959
TEST='emerge-volteer coreboot chromeos-bootimage', flash and boot
volteer to kernel and verify that the trackpad works.
Change-Id: I30f8266ec87a7cde293c84d3e687d133207b8d59
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42550
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
With the stub video_console_init() removed from depthcharge in
CL:2241493, depthcharge will fail to compile:
payloads/libpayload/gdb/stub.c:76: undefined reference to
`video_console_init'
Since video_console_init() is meant to be implemented in
libpayload, libpayload should be consistent with itself by not calling
this function when it's not implemented (i.e., when !LP_VIDEO_CONSOLE).
Therefore, initialize video console only if LP_VIDEO_CONSOLE is set.
BRANCH=none
BUG=none
TEST=USE="menu_ui" emerge-gale depthcharge
Change-Id: Ic45f9073330258cb77301003484ec525b2404180
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42505
Reviewed-by: Joel Kitching <kitching@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The pass through mode (SW CM) RTD3 is not supported until QS platform.
D3Cold is needed to be disabled along with upstream TBT firmware
signed_TGL_HR_4C_A0_rev6_pre4_SW_CM_PM_support_ENG_VER_perst_check_fix.
This temporary patch will need to be reverted once PM RTD3 support is
validated on QS platform.
BUG=b:159050315
TEST=Verfiy PM S0ix along with upstream TBT firmware.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I98ed991e4185abf1f3168e33b099e0e97c9075f6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42504
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Divya Sasidharan <divya.s.sasidharan@intel.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Using guidance from Intel, a new set of power limits (PL1, PL2 & PL4)
are available for TGL-U. They are dependent upon the SKU of the CPU
that the mainboard is running on. Volteer is updated here to use these
new limits.
To accomplish this, the SoC chip config's power_limits_config member
was expanded to an array, which can be indexed by POWER_LIMITS_*_CORE
macros. Just before power limits are applied, the correct set of them
is chosen from the array based on System Agent PCI ID. Therefore, a
TGL board should have two sets of power limits available in the
devicetree.
BUG=b:152639350
TEST=On a Volteer SKU4 (4-core), verified the following console output:
CPU PL1 = 15 Watts
CPU PL2 = 60 Watts
CPU PL4 = 105 Watts
Change-Id: I18a66fc3aacbb3ab594b2e3d6e2a4ad84c10d8f0
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42436
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
This allows the kernel to runtime suspend these devices and properly
shut them down. If a tty is not used, the kernel will disable the
device.
I omitted UART0 because the PSP will not power the controller before
accessing it. This causes PSP boot failures. See b/158772504. We also
can't enable UART0 D3 until we stop using the mmio kernel command line
`console=uart,mmio32,0xfedc9000`. The kernel will suspend the UART
controller before it notices that the mmio address matches ttyS0. This
causes the kernel to fail writing to the UART. So we need to move over
to `console=ttyS0`.
BUG=b:153001807, b:157617092, b:157858890, b:158772504
TEST=Boot trembyle and see I2C devices entering and exiting D3.
* See the UART devices entering D3
* Made sure the i2c peripherals were still functional.
* Ran suspend stress test for 40+ iterations.
[ 0.349094] power-0362 __acpi_power_on : Power resource [FUR1] turned on
[ 0.350627] power-0362 __acpi_power_on : Power resource [FUR2] turned on
[ 0.352094] power-0362 __acpi_power_on : Power resource [FUR3] turned on
[ 0.353626] power-0362 __acpi_power_on : Power resource [I2C2] turned on
[ 0.376980] power-0362 __acpi_power_on : Power resource [PRIC] turned on
[ 0.399997] power-0362 __acpi_power_on : Power resource [PRIC] turned on
[ 0.401953] power-0362 __acpi_power_on : Power resource [I2C3] turned on
[ 0.403460] power-0362 __acpi_power_on : Power resource [I2C4] turned on
[ 0.483646] power-0418 __acpi_power_off : Power resource [I2C4] turned off
[ 1.028404] power-0418 __acpi_power_off : Power resource [I2C3] turned off
[ 1.448426] power-0418 __acpi_power_off : Power resource [I2C2] turned off
[ 5.308094] power-0418 __acpi_power_off : Power resource [FUR1] turned off
[ 5.340833] power-0418 __acpi_power_off : Power resource [FUR2] turned off
[ 5.382041] power-0418 __acpi_power_off : Power resource [FUR3] turned off
[ 5.423861] power-0362 __acpi_power_on : Power resource [I2C3] turned on
[ 6.698225] power-0362 __acpi_power_on : Power resource [I2C2] turned on
[ 6.856573] power-0418 __acpi_power_off : Power resource [I2C3] turned off
[ 8.246970] power-0418 __acpi_power_off : Power resource [I2C2] turned off
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I04c4a729d4cb9772ab78586fdbb695b450cc1600
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42473
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add RW_MRC_CACHE flash region to hold MRC cache data.
With memory training skipped for subsequent reboots, the boot
time is reduced by 8 minutes on OCP Delta Lake server, when
FSP verbose logging is turned on.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I27ed00100e1ea9e29b0e71ea5a8397cd550e193a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42025
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
OCP Delta Lake server is a one socket server platform powered by
Intel Cooper Lake Scalable Processor.
The Delta Lake server is a blade of OCP Yosemite V3 multi-host
sled.
TESTED=Successfully booted on both YV3 config A Delta Lake server
and config C Delta Lake server. The coreboot payload is Linux kernel
plus u-root as initramfs. Below are the logs of ssh'ing into a
config C deltalake server:
jonzhang@devvm2573:~$ ssh yv3-cth
root@ip's password:
Last login: Mon Apr 20 21:56:51 2020 from
[root@dhcp-100-96-192-156 ~]# lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 52
On-line CPU(s) list: 0-51
...
[root@dhcp-100-96-192-156 ~]# cbmem
34 entries total:
0:1st timestamp 28,621,996
40:device configuration 178,835,602 (150,213,605)
...
Total Time: 135,276,123,874,479,544
[root@dhcp-100-96-192-156 ~]# cat /proc/cmdline
root=UUID=f0fc52f2-e8b8-40f8-ac42-84c9f838394c ro crashkernel=auto selinux=0 console=ttyS1,57600n1 LANG=en_US.UTF-8 earlyprintk=serial,ttyS0,57600 earlyprintk=uart8250,io,0x2f8,57600n1 console=ttyS0,57600n1 loglevel=7 systemd.log_level=debug
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com>
Change-Id: I0a5234d483e4ddea1cd37643b41f6aba65729c8e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40387
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
There's a useless check with both branches doing the same: enabling RC6
and disabling RC6p. In past, this condition would enable RC6p in IVB but
not on SNB. Then, at some point, RC6p was considered unstable and was
disabled, but the condition remained.
It's not needed so let's remove it.
Change-Id: I926bb682d1b9d21185048224490b966c33204b6a
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42410
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
TGL RVP and Volteer use ov8856 camera module from different vendors.
TGL RVP from Foxlink and Volteer from Sunny. ov8856 sensor is identical
for the two modules but VCM and EEPROM are different. Originally,
Volteer ACPI was set to align with Sunny module, GT9679. But it turned
out GT9679 is compatible with Foxlink's DW9768. So Volteer camera ACPI
configuration doesn't need to keep GT9679.
BUG=b:158188369
BRANCH=none
TEST=Build and boot volteer proto 2 board. Start a camera app
and check user-facing camera functionalities.
Signed-off-by: Daniel Kang <daniel.h.kang@intel.com>
Change-Id: I792608f86a59b16545dfa4edf6508de7a444bb26
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42048
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Daniel H Kang <daniel.h.kang@intel.corp-partner.google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
This change updates platform.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for volteer.
Change-Id: I248f5e9a1e3ba4f6426167f0406073252cc6513a
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42506
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In waddledee and waddledoo, discrete & integrated BT signals are routed to
different USB ports. In all the other variant boards, discrete &
integrated BT signals are routed to the same USB port (port 8 - index 7).
Re-configure the USB devices accordingly.
Also device configuration in override tree are applied only if there is a
matching device in base devicetree. So configure all the USB devices in
base devicetree and turn them off.
BUG=b:154064148
TEST=Ensure that the SSDT contains the ACPI objects for enabled USB
devices.
Change-Id: I1b8bf7f4db1d2661f310bf4874428a6d1de222c6
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42554
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Most LAPIC registers are 32bit, and thus the use of long is valid on
x86_32, however it doesn't work on x86_64.
* Don't use long as it is 64bit on x86_64, which breaks interrupts
in QEMU and thus SeaBIOS wouldn't time out the boot menu
* Get rid of unused defines
* Get rid of unused atomic xchg code
Tested on QEMU Q35 with x86_64 enabled: Interrupts work again.
Tested on QEMU Q35 with x86_32 enabled: Interrupts are still working.
Tested on Lenovo T410 with x86_64 enabled.
Change-Id: Iaed1ad956d090625c7bb5cd9cf55cbae16dd82bd
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36777
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We are currently relying on the assumption that the amdcompress tool
will zero out the bss section. Instead of relying on this assumption,
lets explicitly clear it.
The implementation was copied from assembly_entry.S.
BUG=b:147042464
TEST=Cold boot trembyle and also s3 resume trembyle
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ifb4f4cc6932dd4c3c92d4e7647569f9a0c69ea4c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42475
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change is required so we have a defined entry point on S3. Without
this, the S3_RESUME_EIP_MSR register could in theory be written to
later which would be a security risk.
BUG=b:147042464
TEST=Resume trembyle and see bootblock start.
coreboot-4.12-512-g65779ebcf73f-dirty Thu Jun 4 22:38:17 UTC 2020 smm starting (log level: 8)...
SMI# #6
SMI#: SLP = 0x0c01
Chrome EC: Set SMI mask to 0x0000000000000000
Chrome EC: Set SCI mask to 0x0000000000000000
Clearing pending EC events. Error code EC_RES_UNAVAILABLE(9) is expected.
EC returned error result code 9
SMI#: Entering S3 (Suspend-To-RAM)
PSP: Prepare to enter sleep state 3... OK
SMU: Put system into S3/S4/S5
Timestamp - start of bootblock: 18446744070740509170
coreboot-4.12-512-g65779ebcf73f-dirty Thu Jun 4 22:38:17 UTC 2020 bootblock starting (log level: 8)...
Family_Model: 00810f81
PMxC0 STATUS: 0x200800 SleepReset BIT11
I2C bus 3 version 0x3132322a
DW I2C bus 3 at 0xfedc5000 (400 KHz)
Timestamp - end of bootblock: 18446744070804450274
VBOOT: Loading verstage.
FMAP: area COREBOOT found @ c75000 (3715072 bytes)
CBFS: Locating 'fallback/verstage'
CBFS: Found @ offset 61b80 size cee4
PROG_RUN: Setting MTRR to cache stage. base: 0x04000000, size: 0x00010000
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I4b0b0d0d576fc42b1628a4547a5c9a10bcbe9d37
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42088
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Add DW9768 VCM device and add its entry in the OV8856's _DSD
to allow the V4L2 driver to use the VCM functionality.
Also add ACPI entries for AT24 NVM device, this will enumerated
as a generic NVM device and not part of the V4L2 framework.
BUG=b:155285666
BRANCH=None
TEST=Build and able to see DW9768 and AT24 getting listed I2C3 lanes
and able to capture image using world facing camera.
Change-Id: I19e4a4107c5bc9d96f718d654df50e2705b98c03
Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Fix Puff and its variants to not shutdown the AP before the cr50 reboot.
This is the same approach that Sarien do to remain on during a cr50
cycle.
BUG=b:154071064
BRANCH=none
TEST=none
Change-Id: I5f92b4f769654b67c10c91e4cc7b2bce785e302f
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42497
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Here we consolidate some of the dptf.asl duplication between
Puff and it's variants. Customizations can be done later
either as a direct copy or preferably via introducing a #define.
BUG=b:154071868
BRANCH=none
TEST=none
Change-Id: I35fa1e152adb5f04fb6ef1bd2448376cf9f37980
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
Commit 86ba0d73f3 added VBIOS support for
Raven2 silicon and changed the VBIOS file names to the format including
the PCI device revision number. Upstream SeaBIOS expects the file to
have only the PCI vendor and device IDs in the CBFS file name, so it
doesn't find the VBIOS any more after that patch got applied. This patch
adds the path and CBFS file name to include the Picasso VBIOS a second
time under the CBFS file name SeaBIOS expects.
This is a workaround and not a clean solution, but avoids breakage.
It's separated from the rest of the Mandolin support, so it can just be
reverted after a proper fix is implemented.
https://chromium-review.googlesource.com/2015963/ in combination with a
links file in CBFS might solve the issue for most of the cases, but it's
not sure yet if for all, so a proper fix might require more than that.
BUG=b:153675508
Change-Id: I4d9042615965b6a2d9255c194cf23368264ffe54
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42433
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Commit 0148fcb4 [Combine Broadwell Chromeboxes using variant board scheme]
incorrectly flipped the mic pin configs for verb NIDs 0x18 and 0x19,
so set them back to the correct values, which match the original
Chromium sources (where the NID identifiers in the pin config comments
were reversed, which was the source of the confusion originally.
Test: build/boot guado variant, verify mic attached to 3.5mm jack functional
Change-Id: I65b813c8f801303682762ce5a7446e07af117b9f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42518
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Commit 0558d0c [mb/google/beltino/**/hda_verb.c: Correct pin configs]
incorrectly flipped the mic pin configs for verb NIDs 0x18 and 0x19,
so set them back to the correct values, which match the original
Chromium sources (where the NID identifiers in the pin config comments
were reversed, which was the source of the confusion originally.
Test: build/boot panther and zako variants, verify mic attached
to 3.5mm jack functional
Change-Id: I172a0bb299049d113a0272ee9c790b25b6242cad
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42499
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
fch_apic_routing is used as name of an array that init_tables()
populates with the APIC IRQ routing information. Also the fch_pirq array
where fch_apic_routing was used as struct name contains the IRQ mapping
for both PIC and APIC mode, so rename it to fch_irq_routing.
Change-Id: Iba7a2416c6e07cde1b8618bdabf31b00e3ca4dd1
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The PIC and APIC IRQ routing tables are pre-populated with PIRQ_NC in
init_tables(), so the fch_pirq table entries where both IRQ numbers are
set to fch_pirq are redundant and can be removed.
Change-Id: I0d9b4f25e12a66cf86d1ad541955c3d2fe336c5a
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This change adds support for SW CM. Add Operating System Capabilities
(_OSC) method to enable USB/DisplayPort/Inter-domain USB4 Internet
Protocol tunneling and enable PCIe tunneling as well. Remove Connect
Topology(CNTP) command because kernel driver directly works with SW CM
Thunderbolt firmware. Update _DSD method for USB4 support across XHCI
and PCIe root ports.
BUG=b:140645231
TEST=Check Type C device all ports connection/enumeration with SW CM.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I859c5075882e40d7be30d4ba88cc825886712b74
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42295
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Rename dptf.asl to dptf_common.asl under soc/intel/common/acpi path
to avoid any kind of confusion with another dptf.asl file under
soc/intel/common/acpi/dptf path. Sometime it's confusing to have
two dptf.asl files just one directory apart.
BUG=None
BRANCH=None
TEST=Build and boot on volteer system
Change-Id: I23d93719e23c0b7659ccb23e5d0868f879bc162c
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42417
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add unique new acpi device ids for dptf for Tiger Lake soc based platforms
and update volteer speficic dsdt.asl file accordingly. The Linux kernel
driver expects these new acpi device ids for dptf functionalities.
BUG=None
BRANCH=None
TEST=Build and boot on volteer system
Change-Id: I7dbb812c0fc0f5084c98cf2752ce7ddce8e4d50e
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42040
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Move uart_platform_base and uart_platform_refclk to their own
compilation unit to avoid preprocessor usage. The newly created
compilation unit is only added to the build when PICASSO_CONSOLE_UART
is selected.
Change-Id: I56911addc8c000a0772156e5166720867cdd26fe
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42517
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Kconfig 4.17 started using the $(..) syntax for environment variable
expansion while we want to keep expansion to the build system.
Older Kconfig versions (like ours) simply drop the escapes, not
changing the behavior.
While we could let Kconfig expand some of the variables, that only
splits the handling in two places, making debugging harder and
potentially messing with reproducible builds (e.g. when paths end up
in configs), so escape them all.
Change-Id: Ibc4087fdd76089352bd8dd0edb1351ec79ea4faa
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42481
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
The APU2 was using the soc/amd/common functions to do GPIO reads and
writes. The functions that were being used are getting eliminated in
the SOC directory, but since the APU isn't using the rest of that code
(as it's not using the rest of the SOC codebase), it proved to be
problematic to use the updated functions.
The solution I've put in place here is to pull everything needed for the
GPIO reads & writes into the gpio_ftns.c & h files.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ied39c114bdf3637977d21f56fd7db428c52e4706
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42484
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
The option to have amdfw outside of CBFS used dd to write amdfw at a
given location overwriting anything that was there before, which may
cause the build to fail due to the FMAP header being overwritten
resulting in a not too obvious error that the image is a legacy image
without FMAP header.
Mandolin was the only board using this functionality, but I fixed the
placement of components in the flash image there, so that amdfw can just
be placed in CBFS avoiding those problems.
Change-Id: I0f3abab9d3939da43e1681d5cfe2c8d494402acf
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42438
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use LZ4 compression technique to compress FSP-S. This provides some
SPI ROM space savings (~36 KiB) in each CBFS. FSP-M is XIP and hence not
compressed. LZ4 is chosen over LZMA since the decompression saves
~25 ms for an extra overhead of ~1KiB.
LZ4 Compression:
fsps.bin 0xe6fc0 fsp 254262 LZ4 (290816 decompressed)
LZ4 Decompression:
17:starting LZ4 decompress (ignore for x86) 712,361 (1,072)
18:finished LZ4 decompress (ignore for x86) 750,695 (38,334)
LZMA Compression:
fsps.bin 0xe6fc0 fsp 253415 LZMA (290816 decompressed)
LZMA Decompression:
15:starting LZMA decompress (ignore for x86) 707,696 (1,150)
16:finished LZMA decompress (ignore for x86) 767,763 (60,067)
BUG=b:158034451
TEST=Build and boot volteer mainboard.
Change-Id: I91e33eb7b688b5383f3a0075a28ac21250314973
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42444
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use LZ4 compression technique to compress FSP-S. This provides some
SPI ROM space savings(~60 KiB) in each CBFS. FSP-M is XIP and hence not
compressed. LZ4 is chosen over LZMA since the decompression saves
~50 ms for an extra overhead of ~1.5 KiB.
LZ4 Compression:
fsps.bin 0xa9fc0 fsp 203423 LZ4 (262144 decompressed)
LZ4 Decompression:
17:starting LZ4 decompress (ignore for x86) 433,550 (1,154)
18:finished LZ4 decompress (ignore for x86) 461,620 (28,069)
LZMA Compression:
fsps.bin 0xa9fc0 fsp 202132 LZMA (262144 decompressed)
LZMA Decompression:
15:starting LZMA decompress (ignore for x86) 478,448 (1,174)
16:finished LZMA decompress (ignore for x86) 557,725 (79,277)
BUG=b:158034451
TEST=Build and boot waddledoo mainboard.
Change-Id: I416b1d91d7f4836b1e9c641b0fe07b39876364ba
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42445
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Use LZMA compression technique to compress FSP-S. This provides some
SPI ROM space savings(~27 KiB) in each CBFS. FSP-M is XIP and hence not
compressed. LZMA is chosen over LZ4 since it provides extra space
savings of ~1 KiB for the decompression overhead of ~7 ms.
LZMA Compression:
fsps.bin 0xd1fc0 fsp 190132 LZMA (217088 decompressed)
LZMA Decompression:
15:starting LZMA decompress (ignore for x86) 343,289 (417)
16:finished LZMA decompress (ignore for x86) 373,922 (30,632)
LZ4 Compression:
fsps.bin 0xd1fc0 fsp 191310 LZ4 (217088 decompressed)
LZ4 Decompression:
17:starting LZ4 decompress (ignore for x86) 345,676 (581)
18:finished LZ4 decompress (ignore for x86) 369,101 (23,424)
BUG=b:158034451
TEST=Build and boot helios mainboard.
Change-Id: Ic0d0d81c81eaa365f3dbfdd2e00ac76cea287387
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42446
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Upcoming variant boards will use 16 MiB SPI ROM. So add support for 16
MiB flash map descriptor.
BUG=b:155107866,b:152981693
TEST=Build different variant boards. Ensure that waddledoo which is using
32 MiB SPI ROM boots.
Cq-Depend: chrome-internal:3107306
Change-Id: I8a6868da3280a662ff3a30623804ff135e6cbfbc
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42322
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Remove unused cannonlake dptf.asl file and cleanup defines from apollolake
dptf.asl file as per soc/intel/common/acpi code changes for dptf.
BUG=None
BRANCH=None
TEST=Build and boot on the system
Change-Id: I4c8bf2bd5da9d5881e7690bff34816b19dd96072
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This reverts commit d5f1e0f973.
Reason for revert: FSP-S is now fixed to not touch the SPI
configuration registers. Thus, coreboot does not need to reconfigure
SPI after FSP-S has run.
BUG=b:153506142
TEST=Verified that SPI configuration registers look the same before
and after FSP-S has run. em100 works fine without any additional
changes in coreboot to reconfigure SPI.
Change-Id: I4832e62e0331aa39abe0cca7725915262bb2cf83
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin Frodsham <justin.frodsham@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
If a UCSI event comes in when the EC is in S0ix mode then the kernel
driver attempts a transaction but fails and this can leave the system
in an unexpected state where the only wake source is the power button.
This change will not notify the UCSI driver if the EC is in S0ix mode
and instead keep track of the event and send it on resume.
BUG=b:157923800
TEST=tested on drallion system:
1. Put drallion system into suspend
2. Attach power supply
3. Ensure the system can wake with keypress
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I43acb089385d9b41ac955f053e409daad67423f1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42237
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Temporary workaround for S0ix issues related to FSP's handling of 0 value.
When IomTypeCPortPadCfg is 0 FSP completely skips any flow related to this
value which seems to be causing issues with s0ix.
This is still being debugged and a final solution will be made when available
BUG=b:159151238
TEST=flash image with workaround to volteer and verify that s0ix
cycles correctly.
Change-Id: Id79dd1c49958389cdb666b3760abd821bc1973a8
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42268
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change includes uart.c in bootblock, romstage, ramstage and
verstage unconditionally because this file is handling more than just
the UART console configuration. This allows boards to take advantage
of picasso_uart_mmio_ops even if PICASSO_UART is not selected.
uart_platform_base and uart_platform_refclk mustn't be provided if
PICASSO_UART is unset, so add an #if around those functions.
BUG=b:158346697
TEST=Mandolin builds again.
Change-Id: If1173034b0d2ed32f77241768e1e8abb208aac3a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42339
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds support for enabling/disabling PCIe hot-plug via
a chip config option PcieRpHotPlug, which is copied to the corresponding
FSP-S UPD.
BUG=b:156879564
BRANCH=none
TEST=Boot Volteer/RVP with FSP log and check hotplug enabled/disabled
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I4c0187644b6ca9735f1b159e110e3466af14ff71
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41794
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add CFL defaults for VR TDC config and provide Iccmax for additional Xeon
CPUs tested on the Prodrive/Hermes board.
Based on the following Intel documents:
* Document Number 570805 (XEON E EDS Vol 1)
* Document Number 337344 (CFL Datasheet Vol 1)
* Document Number 571264 (CFL CNP PDG)
Change-Id: I681de076318fb647c44cc8b8c42eb297018cc540
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40856
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Read the PCH Strap Length field in FLMAP1 as described in the
"SPI Programming Guide" and print the number of fields specified there.
This code dumps the following straps:
* Intel GM45: 8 straps
* Intel C216: 72 straps
* Intel C240: 360 straps
Add a new function to easily set PCH straps, which is useful for debugging.
Change-Id: Ieb7891b214d82c984379794de9b3fe1a6d0d3466
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41693
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Hug <philipp@hug.cx>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
When Linux is booted, the kernel reports
"do_IRQ: 1.55 No irq handler for vector"
So far it comes with payloads SeaBIOS and depthcharge, not with
Grub. We assume Grub does something to avoid this problem.
AMD bug tracker system (JIRA PLAT-21393) says the APs can not be set
EXTINT delivery mode.
In Intel 64 and IA-32 Architectures Software Developer’s Manual volume
3A, see chapter 10.5.1 Local Vector Table, it says:
"The APIC architecture supports only one ExtINT source in a system,
usually contained in the compatibility bridge. Only one processor in the
system should have an LVT entry configured to use the ExtINT delivery
mode."
Tested on mandolin (Picasso) board, the error in dmesg is gone.
The bug 153677727 has two parts.
1. Soft lockup
2. do_IRQ 1.55.
The soft lockup issued has been fixed by
https://review.coreboot.org/c/coreboot/+/41128
BUG=b:153677727
TEST=mandolin
Change-Id: I2956dcaad87cc1466deeca703748de33390b7603
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42219
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The call made at mp_ops.post_mp_init() generally
uses four different names. Unify these with followups.
smm_southbridge_enable(SMI_EVENTS)
smm_southbridge_enable_smi()
hudson_enable_smi_generation()
enable_smi_generation()
Furthermore, some platforms do not enable power button
SMI early. It may be preferred to delay the enablement,
but fow now provide global_smi_enable_no_pwrbtn() too.
Change-Id: I6a28883ff9c563289b0e8199cd2ceb9acd6bacda
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
LGA775 CPUs can have at most 4 threads, and Eaglelake supports them.
As this socket is also used by other chipsets, temporarily place this
symbol into the northbridge scope until all chipsets are factored out.
Change-Id: I6e01363d995e135815cc70779e0cd5baf806cf60
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41841
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The assumption up to this point was that if the system had an x86
processor, verstage would be running on the x86 processor. With running
verstage on the PSP, that assumption no longer holds true, so exclude
pieces of code that cause problems for verstage on the PSP.
As a generalization, remove all-y for CONFIG_ARCH_xx guarded
makefiles.
BUG=b:158124527
TEST=Build and boot on Trembyle
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ia7dcfed699ee1c0cd5a5250431c5f05bf6d8b9c7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42221
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Add the AMD supplied code (modified to work with GCC) to the vendorcode
directory. Verstage will be running on the PSP as a userspace
application under the bootloader, which is what bl_uapp signifies.
AMD is still working on documentation for the entire PSP userspace
application interface.
BUG=b:158124527
TEST=Build & boot psp_verstage on Trembyle
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ie740c89afe2277eff279fc5c94f88ffd43a78a37
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Because the PSP maps the MMIO addresses that are used to non-
deterministic addresses, the accesses need to be able to find
the address at runtime.
BUG=b:158124527
TEST=Build & boot with Trembyle
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I68305e0f31956c57bfdee42025bdfe938703e82d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42061
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Exclude pieces of console code from the vboot if running before
bootlock. The PSP verstage code will re-implement some of
these in its own code.
BUG=b:123887623
TEST=Build with following patches
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ifc9fb0810e0816fe0a68e52287eda6145043a619
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41815
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For AMD's family 17h, verstage can run as a userspace app in the PSP
before the X86 is released. The flags for this have been made generic
to support any other future systems that might run verstage before
the main processor starts.
Although an attempt has been made to make things somewhat generic,
since this is the first and currently only chip to support verstage
before bootblock, there are a number of options which might ultimately
be needed which have currently been left out for simplicity. Examples
of this are:
- PCI is not currently supported - this is currently just a given
instead of making a separate Kconfig option for it.
- The PSP uses an ARM v7 processor, so that's the only processor that
is getting updated for the verstage-before-bootblock option.
BUG=b:158124527
TEST=Build with following patches
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I4849777cb7ba9f90fe8428b82c21884d1e662b96
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41814
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
A looong time ago when cache_as_ram.S was built into romstage,
the stage was also linked twice. First at a fixed low address
and then again relocated at the final execute-in-place address.
Change-Id: Ic624feef6794f2c24e38459a45583d84fc07a484
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42347
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
When adding XIP stages on x86, the -P parameter was used to
pass a page size that covers the entire file to add. The same
can now be achieved with --pow2page and we no longer need to
define a static Konfig for the purpose.
TEST: Build asus/p2b and lenovo/x60 with "--pow2page -v -v" and
inspect the generated make.log files. The effective pagesize is
reduced from 64kB to 16kB for asus/p2b giving more freedom
for the stage placement inside CBFS. Pagesize remained at 64kB
for lenovo/x60.
Change-Id: I5891fa2c2bb2d44077f745619162b143d083a6d1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41820
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Keith Hui <buurin@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
For add-stage command, --pow2page is equivalent of passing
-P log2ceil(sizeof stage). The sizeof stage can be hard to
determine in Makefile to be passed on the commandline.
Change-Id: If4b5329c1df5afe49d27ab10220095d747024ad6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41832
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
If there is no installed audio daughter board on volteer then the
HDA driver in the kernel will crash on resume. In order to prevent
this disable the PCI device when AUDIO=NONE probe match is true.
BUG=b:147462631
TEST=boot on volteer and ensure that the PCI device at 0:1f.3 is gone
Change-Id: I4a436e1b76418030bf635427e490b54a713fdd33
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
If the OS sets the target device state to D3, we need to clear it so we
can reestablish register access.
BUG=b:153001807
TEST=Boot trembyle with I2C powered off and see it power back on.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: If9bd1b7cfa7b8d074226c4dcdefc1a44cad8b940
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42325
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The legacy UARTs are supposed to default to off according to the
documentation (PPR for AMD Family 17h Model 18h). But legacy UART Range_0
is enabled after reset. The PSP might be enabling it or the documentation
might be wrong.
Having it enabled causes problems though. We have ACPI nodes defining
MMIO UARTs, and the kernel also probes for legacy UARTs. This results in
two drivers accessing the same device, one via MMIO and one via IO. I
suspect this was the cause of the garbage serial output.
Before the change you would see the following in the console:
[ 0.741108] serial8250: ttyS3 at I/O 0x2e8 (irq = 3, base_baud = 115200) is a 16550A
After this change, we no longer see it.
BUG=b:152079780, b:157858890
TEST=Boot trembyle and make sure serial is still working.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I9d837e449b961dbb55d1301d2107838e26b3f892
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The purpose of pci_early_bridge_init() is to temporarily configure
PCIe rootport (or PCI bridge) on bus 0 to configure PCI device BARs
on the secondary bus. Currently used and tested only with UART_OXPCIE.
Since those BARs do not reset on stage changes, it is not necessary
to redo those steps for verstage or postcar. Note that the option
does not really work with many of the later platforms where PCIe
pins/links/lanes are configured late in FSP-M or similar blob.
Change-Id: I148f44c76c61edcfd8ab1c8c531cd2e6ca343130
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42227
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Currently, configuring and reviewing DPTF parameters is difficult
because DPTF tables and methods are defined in static ASL files, and are
littered with #ifdefs which both define parameters and influence
behavior (e.g., whether a method is included or not). This patch train
is an effort to bring DPTF support to our ACPI DSDT/SSDT generation
framework.
This first patch is very minimal, and includes only creation of the
DPTF device (in the DSDT).
BUG=b:143539650
TEST=compiles (later tests get more comprehensive).
Change-Id: I14df9f422c911677aeea25552ac1822a9462c58a
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41883
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Correct a message of "Error: Can't add stage_cache 57a9e101 to imd".
ramstage is 0xffc90 and adding FSP-S (0x50000) failed. Increase the
reserved region of SMRAM to accommodate both images.
BUG=b:158704095
TEST=Boot Mandolin and check console log
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I51595d80d4779e995ec2a26e395cf95d666a309e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42314
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently, the logs are only checked, if retrieved locally. Moving it
after the if statement, now logs retrieved remotely are also checked.
The change in behavior is, that now all commands are executed first, so
before hitting this error, other errors might occur unrelated to the
console log.
Change-Id: I016bbde66c58a654042ad880c6007ddc1d143691
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41858
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This patch adds correct PL2 baseline setting and PsysPL2 for different
SKUs. There is no way to identify the barral jack power rating, the
assumption is following that ships with the product:
1. i3/i5/i7: 90W BJ
2. Celeron/Pentium: 65W BJ
For Type-C adapter, we don't have Pcritcial (10ms) data, keeps the
original settings as 90% of adapter rating for PsyspL2/PL4 and PL2
as min(PL2, 0.9n) where n is adapter rating power.
BUG=b:143246320
TEST=Run with U62 and Celeron CPU and ensure the PL2 settings are correct
Change-Id: Ib16d4f65707801b430f06892ab45ecfa7551593f
Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42281
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
The Endeavour variant does not have a DisplayPort input so there's no
need to wait for it.
BUG=b:147830399
BRANCH=none
TEST=boot endeavour; check coreboot logs
Signed-off-by: Jeff Chase <jnchase@google.com>
Change-Id: I30c7c47f19a61ce66c6c923864d80870d2761859
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42085
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
ALIB function 1 needs to be called every time there is a change in
AC/DC state of the system. This change adds a wrapper method that can
be called by PNOT (method to notify system power state change) to
report to ALIB that system power state has changed i.e. AC <-> DC.
Additionally, this change drops the call to ALIB from _INI method
since the PWRS object might not be initialized correctly at that
point. Instead EC makes a call to PNOT when PWRS is initialized.
This wrapper also fixes the value of power state being passed into
ALIB. ALIB expects 0 = AC and 1 = DC. On the other hand, PWRS reports
1 as AC and 0 as DC. WAL1() takes care of inverting the PWRS state
before passing into ALIB.
BUG=b:157752693
TEST=Verified that WAL1() gets called on AC connect/disconnect.
Steps followed:
$ echo 1 > /sys/module/acpi/parameters/aml_debug_output
$ dmesg -w | grep ACPI
[ 76.306947] ACPI Debug: "EC: AC DISCONNECTED"
[ 76.307064] ACPI Debug: "ALIB call: func 1 params 0x03 0x00 0x01"
[ 82.264946] ACPI Debug: "EC: GOT PD EVENT"
[ 82.539833] ACPI Debug: "EC: GOT PD EVENT"
[ 82.753721] ACPI Debug: "EC: GOT PD EVENT"
[ 82.843676] ACPI Debug: "EC: GOT PD EVENT"
[ 82.970596] ACPI Debug: "EC: AC CONNECTED"
[ 82.970659] ACPI Debug: "ALIB call: func 1 params 0x03 0x00 0x00"
[ 83.047598] ACPI Debug: "EC: GOT PD EVENT"
[ 84.804733] ACPI Debug: "EC: GOT PD EVENT"
[ 86.317934] ACPI Debug: "EC: GOT PD EVENT"
[ 86.385920] ACPI Debug: "EC: GOT PD EVENT"
[ 86.515830] ACPI Debug: "EC: AC DISCONNECTED"
[ 86.515922] ACPI Debug: "ALIB call: func 1 params 0x03 0x00 0x01"
[ 90.089062] ACPI Debug: "EC: GOT PD EVENT"
[ 90.357914] ACPI Debug: "EC: GOT PD EVENT"
[ 90.573812] ACPI Debug: "EC: GOT PD EVENT"
[ 90.662744] ACPI Debug: "EC: GOT PD EVENT"
[ 90.788706] ACPI Debug: "EC: AC CONNECTED"
[ 90.788835] ACPI Debug: "ALIB call: func 1 params 0x03 0x00 0x00"
[ 90.865675] ACPI Debug: "EC: GOT PD EVENT"
[ 92.621793] ACPI Debug: "EC: GOT PD EVENT"
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I1f2ade28ca35378ebf4647d8df3d2ea4d0b08096
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42297
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This allows to remove references to CONFIG_DCACHE_RAM entries in
most cache_as_ram.S files. While Kconfig variable names appear
for every stage, linker symbol names will only appear in stages
they are valid in.
Also, linker scripts have LOG2CEIL which comes in handy to enforce
MTRR alignments.
Change-Id: I2fef3546d2bfea2d4d8f87aaf8376e5566fd6aaa
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30872
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change updates memlayout.ld for Picasso to place all early
stages (bootblock, romstage, FSP-M, verstage) and data buffers (vboot
workbuf, APOB, preram-cbmem console, timestamp, early BSP stack) at
the bottom of DRAM starting at 32MiB. This uses static allocation for
most components by defining Kconfig variables for base and size. It
relies on the linker to complain if any of the assumptions are broken.
This also allows romstage to use linker symbols for
_early_reserved_dram and _eearly_reserved_dram to store information in
CBMEM about the early DRAM usage by coreboot before ramstage starts
execution. This allows ramstage to reserve this memory region in BIOS
tables so that S3 resume can reuse the same space without corrupting
OS memory.
BUG=b:155322763
TEST=Verified memory reported by coreboot:
Writing coreboot table at 0xcc656000
0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
1. 0000000000001000-000000000009ffff: RAM
2. 00000000000a0000-00000000000fffff: RESERVED
3. 0000000000100000-0000000001ffffff: RAM
4. 0000000002000000-000000000223ffff: RESERVED
5. 0000000002240000-00000000cc512fff: RAM
6. 00000000cc513000-00000000cc6bffff: CONFIGURATION TABLES
7. 00000000cc6c0000-00000000cc7c7fff: RAMSTAGE
8. 00000000cc7c8000-00000000cd7fffff: CONFIGURATION TABLES
9. 00000000cd800000-00000000cfffffff: RESERVED
10. 00000000f8000000-00000000fbffffff: RESERVED
11. 0000000100000000-000000042f33ffff: RAM
12. 000000042f340000-000000042fffffff: RESERVED
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I009e1ea71b5b5a8e65eba16911897b2586ccfdb6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42264
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This change drops the check for IS_TOP_ALIGNED_ADDRESS() before
setting offset to 0 in cbfstool_convert_fsp(). If the user provides a
baseaddress to relocate the FSP to, then the offset should be set to 0
since there is no requirement on where the file ends up in cbfs. This
allows the user to relocate the FSP to an address in lower DRAM.
BUG=b:155322763
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ibeadbf06881f7659b2ac7d62d2152636c853fb9f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42263
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change copies src/arch/x86/memlayout.ld file to
src/soc/amd/picasso/ and sets MEMLAYOUT_LD_FILE config variable to
point to this newly added file. Unused elements from the memlayout.ld
file are dropped and path to early_dram.ld is updated to include the
one from src/arch/x86.
BUG=b:155322763
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I59bf5f93b712407ddcc9fb8a46167936c6c28a76
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change defines a Kconfig variable MEMLAYOUT_LD_FILE which allows
SoC/mainboard to provide a linker file for the platform. x86 already
provides a default memlayout.ld under src/arch/x86. With this new
Kconfig variable, it is possible for the SoC/mainboard code for x86 to
provide a custom linker file as well.
Makefile.inc is updated for all architectures to use this new Kconfig
variable instead of assuming memlayout.ld files under a certain
path. All non-x86 boards used memlayout.ld under mainboard
directory. However, a lot of these boards were simply including the
memlayout from SoC. So, this change also updates these mainboards and
SoCs to define the Kconfig as required.
BUG=b:155322763
TEST=Verified that abuild with --timeless option results in the same
coreboot.rom image for all boards.
Change-Id: I6a7f96643ed0519c93967ea2c3bcd881a5d6a4d6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42292
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds memory parts used by variant voxel to
mem_list_variant.txt and generates DRAM IDs allocated to these parts.
This variant is not yet supported by coreboot but DRAM IDs need to be
generated for it. In the coming days, variant voxel will be added to
coreboot.
BUG=b:157732528
Change-Id: I8780beec987deb8fed11bb8f84275dcba4768514
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41994
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
The current test framework builds the test code without any warnings at
all, which isn't great -- we have already slipped in some cases of
non-void functions not returning a defined value, for example. It would
likely be overkill to try to use all the same warnings we use for normal
coreboot code (e.g. some stuff like -Wmissing-prototypes makes cmocka's
__wrap_xxx() mock functions unnecessarily cumbersome to work with, and
other things like -Wvla may be appropriate for firmware but is probably
too aggressive for some simple test code). Therefore, let's just add
some of the stuff that points out the most obvious errors.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I4d9801f52a8551f55f419f4141dc21ccb835d676
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42259
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Dabros <jsd@semihalf.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
For Volteer mainboard, this patch set optimized values for PCH external
VR settings and ext rail voltage/current, to achieve better power
savings in sleep states.
v1p05 and vnn power rails can be used as an alternative source
by-passing vccin_aux during Sx. This by-pass feature, enables us to
shutdown vccin_aux rail which is higher voltage rail compared to v1p05
and vnn. These both rails were disabled by default in FSP. Changes in
this patch are:
1. v1p05 and vnn rails are enabled and enabled supported voltage types
in S0i1, S0i2, S0i3, S3, S4, S5 states. They were disabled by default.
2. Icc Max for v1p05 changed to 500 mA from default 100 mA.
3. vnn rail's voltage is changed to 5 V from default 4.2 V.
BUG=None
BRANCH=None
TEST="Build and boot volteer and check VR settings with Intel ITP-XDP
debugger and verify approx 250 mW power savings in Sx"
Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com>
Change-Id: Ib46423872c956af9aaa92902fce552d5447237c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42223
Reviewed-by: Venkata Krishna Nimmagadda <Venkata.krishna.nimmagadda@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change reconfigures SPI speeds after FSP-S has run since
FSP-S is currently configuring the SPI frequency when it should
not. Until FSP-S behavior is fixed, this workaround needs to be
applied.
BUG=b:153506142
TEST=Verified that em100 works fine.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Id9b8330c6f82c7162ff91e8cc10160fdd8cfedab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42267
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Update DPTF_TSR2_SENSOR_ID to 2. Fixes the issue where TSR1 and
TSR2 have the same DPTF_TSR#_SENSOR_ID value causing them to
report the same temperature under /sys/class/thermal
and also swap TSR0 and TSR1 in DTRT to match physical sensor
in volteer schematics
BRANCH=None
BUG=b:149722146
TEST=On volteer system check TSR1 and TSR2 temperatures, should
report different values
`cat /sys/class/thermal/thermal_zone[3,4]/temp`
Also verify other TSRs using `cat /sys/class/thermal/thermal_zone*/temp`
and `ectool tempsinfo all ; ectool temps all`
Signed-off-by: Deepika Punyamurtula <deepika.punyamurtula@intel.com>
Change-Id: Idc5f35e4faf59b0ee726eb32a08eab4654fb342d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42232
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit 9ff4029db9.
Pulling the toplevel Makefile into a tiny one has all sorts of side
effects. For instance, the toplevel (random) .config is also included
so the results depend on the board that is selected there. What finally
broke it is a line that is unconditionally printed for AMD Picasso
boards resulting in lots of lines like this:
skipping LENOVO_W520 because we're missing compilers for \
(Adding PSP c7ce61492157d3237f679c4a40a08b79 \
.../coreboot/3rdparty/amd_blobs/picasso/PSP/PspBootLoader_prod_RV.sbin)
While both issues, the random .config and amd/picasso, could be worked
around easily, it seems hard to predict what other pitfalls are lurking
in the Makefile inclusion. Also, the problem solved by its inclusion
can be fixed by a much simpler `make .xcompile`.
Change-Id: I2ff70f561d717eb30e5f3c06c83e83468e174ec5
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41846
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Selecting VBOOT_LID_SWITCH under BOARD_GOOGLE_BASEBOARD_HATCH creates a
requirement for VBOOT, and prevents building in the non-vboot/non-ChromeOS
case. As this symbol is already selected by CHROMEOS below, there's no need
for the baseboard (and only one of the two) to select it, so don't.
Change-Id: I060e82185997bce451648173dd97dd6a3d5d237f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42137
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Some cases could not be factored out while keeping reproducibility.
Also mark some potential bugs with a FIXME comment, since fixing them
while also keeping the binary unchanged is pretty much impossible.
Tested with BUILD_TIMELESS=1, Asus P8Z77-V LX2 does not change.
Change-Id: Iafe62d952a146bf53a28a1a83b87a3ae31f46720
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42152
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The ASSERT() macro depends on the line number, so changing the line it
appears in breaks reproducibility testing using BUILD_TIMELESS=1.
Work around this problem by placing the `pch_pcie_acpi_name` function,
which contains this macro, at the beginning of the file. This allows
refactoring the rest of the code without affecting the ASSERT() macro.
Change-Id: I2e0432ec9ae6c7d033fc7495afb3a71fe7e77729
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42195
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Picasso doesn't really make use of the common mrc_cache driver because
of the PSP/ABL requirements for APOB NV data. The APOB NV data
gets consumed by PSP/ABLs before x86 comes out of reset. Hence, we cannot
really add any metadata to this saved data or use multiple slots as
done by the default MRC cache driver
(CACHE_MRC_SETTINGS). Additionally, FSP-M requires access to this APOB
NV data which coreboot needs to pass in from different locations
depending upon boot mode:
1. Non-S3 boot: PSP/ABLs store APOB NV data in DRAM at predetermined
location which is present in BIOS directory table.
2. S3 boot: PSP/ABLs do not store APOB NV data in DRAM.
Thus, coreboot needs to set FSP-M UPD NvsBufferPtr as the DRAM
location in non-S3 boot and the address of RW_MRC_CACHE on SPI flash
in case of S3 resume.
This change enables MRC cache support in Picasso in order to meet the
above requirements.
1. NvsBufferPtr is set based on boot mode.
2. APOB NV data is not stashed to CBMEM. Instead it is written right
away to SPI flash in romstage.
BUG=b:155990176
Change-Id: I8661a4cf2d34502967e936bf22a13f6f1b88e544
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42107
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This change moves the check for NvsBufferPtr in S3 resume case to
happen just before FSP-M is called. This allows SoC/mainboard code to
set NvsBufferPtr if it doesn't use the default MRC cache driver.
BUG=b:155990176
Change-Id: Ia272573ad7117a0cb851f0bfe6a4c7989bc64cde
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42109
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
CB:41612 added a new set of tools for generating SPDs for TGL and JSL
based mainboards. This change adds relevant documentation to
coreboot-4.13 release notes.
Change-Id: I168adad25df9195dec64e8104f2dbe992eebddc6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42092
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
From `Documentation/coding_style.md`:
> This does not apply if only one branch of a conditional statement is a
> single statement; in the latter case use braces in both branches:
Change-Id: I5672949e587a9c0e4efa01521a659e4c224085d0
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42200
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Once we support building stages for different architectures,
such CONFIG(ARCH_xx) tests do not evaluate correctly anymore.
Not strictly required for binaryPI boards, but do this for
consistency.
Change-Id: Id0bbbfb6f695c4bb920bc57a1e9362a23884efb3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42161
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Setting the default values for GPIO community power management, causes
issues in detecting TPM interrupts. So to avoid that GPIO PM has to be
disabled in devicetree. But for S0ix it is needed. This patch implements
a workaround in ASL code to enable GPIO PM on S0ix entry and disable it
on S0ix exit.
This patch adds the following three platform specific methods.
1. MS0X to enable power management features for GPIO communities on
low power mode entry and disables it on exit.
2. MPTS to enable power management features for GPIO communities when
preparing to sleep.
3. MWAK to disable power management features for GPIO communities on
waking up.
BUG=b:153847814
TEST=Verify S0ix is working. GPIO PM configuration is upadated on low
power mode entry and exit.
Change-Id: I7225b78ab2ac5bf17f93230cd85cd21e836d807d
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41502
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SPD sources for Dedede and Volteer are being auto-generated by SPD
tools now, and so we can remove SPD_SOURCES from Makefile.inc for
those templates. That makes Makefile.inc empty for those reference
boards, so remove Makefile.inc from the templates.
BUG=b:158492307
BRANCH=None
TEST=Create new variant of volteer, waddledee, and waddledoo, and
verify that we can still build the coreboot image.
Signed-off-by: Paul Fagerburg <pfagerburg@google.com>
Change-Id: Iba5264384302300cc8d2256a6b43f3353770154a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42204
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds Hot-Plug and power management event handers(_L61 &
_L69) respectively for Thunderbolt in the GPE scope. The _L61 method
invokes sub-method HPEV to support Hot-Plug wake event from Thunderbolt
PCIe root ports. This method intercepts Presence Detect Changed
interrupt and make sure the L0s is disabled on empty slots. The _L69
method checks and clears root port's PME SCI status.
BUG=b:156435065
TEST=Verified multiple hot plug successfully with Lenovo dock.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I022cf4aa3f2ee459b9dc87849494e10755d995c8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42149
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
The ACP device sits behind a bridge. Despite the logs indicating
the bridge is likely hooked up, there's some unusual behavior of
writes not sticking. Aside from the speculation of what's causing
the issues the initialization of the device should occur at init()
because of these potential dependencies.
BUG=b:155882600
Change-Id: I8fa83d7d1d4f356c56971d4175a2ae6497a92fb8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42231
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The GCC 10 GNAT toolchain uses a new exception handler ABI, so older
GNAT cannot be built with GCC 10. This patch backports the new
exception handler in libgnat to make GNAT able to be built.
The libgnat patch doesn't remove the old exception handler, so it can
still be built with older compilers.
The cross toolchain can now be built with GCC 10.1.0 in Arch Linux
(with the latest IASL in CB:38907 that can be built in Arch), and the
toolchain can build a working coreboot image with libgfxinit for HP
EliteBook 2560p.
The original and patched crossgcc built with Debian 10.4 GCC 8.3.0,
and the patched crossgcc built with Arch GCC 10.1.0 generate identical
coreboot images with `make BUILD_TIMELESS=1`.
Change-Id: I757158056bf4698d3c68715e026c226615bc70a1
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42158
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
According to the comments of
https://review.coreboot.org/c/coreboot/+/41719
, which is about Microcode patch for amd/picasso.
Change the code with the same way.
The changes include:
1. combine the microcode_xxx.c and update_microcode.c
into one source.
2. Redefine the microcode updating function to eliminate
the parameter. Get the revision ID in the black box.
Reduce the depth of function calls.
3. Get the revision ID by bitwise calculation instead of
lookup table.
4. Reduce the confusing type casts.
5. Squash some lines.
We do not change the way it used to be. The code assume
only one microcode is integrated in CBFS. If needed in future,
41719 is the example of integrating multiple binaries.
And, 41719 depends on the definition in this patch.
Change-Id: I8b0da99db0d3189058f75e199f05492c4e6c5881
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42094
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Setting preferred_pm_profile under sb/ or soc/ overrides the
default determined from SYSTEM_TYPE_xx (or possibly
SMBIOS_ENCLOSURE_TYPE with followup work). This is not desireable.
With the overrides removed, AMD platforms will switch from
PM_UNSPECIFIED to PM_DESKTOP as their preferred profile.
Boards need to either select a pre-defined SYSTEM_TYPE_xx or provide
board-specific mainboard_fill_fadt() should they need to change this.
As they already select SYSTEM_TYPE_LAPTOP, following boards
will change to PM_MOBILE:
google/kahlee
hp/pavilion_m6_1035dx
lenovo/g505s
Change-Id: I45c4a495a4bf3422adae9e22a6e436adef252e77
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42032
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
The platform_cfg.h files under mainboard/ are a legacy configuration
mechanism used with AGESA family14 boards.
With this change following boards will have FADT preferred_pm_profile
changed from PM_UNSPECIFIED to PM_DESKTOP:
amd/inaqua
amd/south_station
amd/union_station
asrock/e350m1
Change-Id: Ic28761eb238dbbaf3e8f820a29ec64b89f12bf53
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42031
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Setting preferred_pm_profile under sb/ overrides the
default determined from SYSTEM_TYPE_xx (or possibly
SMBIOS_ENCLOSURE_TYPE with followup work). This is not desireable.
Boards need to either select a pre-defined SYSTEM_TYPE_xx or provide
board-specific mainboard_fill_fadt() should they need to change this.
As they already select SYSTEM_TYPE_LAPTOP, following boards
will maintain PM_MOBILE:
lenovo/t400
lenovo/x200
roda/rk9
Following will change to PM_DESKTOP:
aopen/dxplplusu
asus/p2b
emulation/qemu-i440fx
emulation/qemu-q35
Change-Id: I2986eb0a8abc94507e9797cc8b64611ae4bd888a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42186
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Use a local variable for the ResourceTemplate in the _CRS methods
instead of the RBUF object. When using RBUF, iasl complained that the
_CRS methods need to be serialized, since objects were created in there.
Since those are only used as local variables, just use local variables
for this.
TEST=iasl stops complaining about those methods not being serialized and
Linux still boots and there aren't any related ACPI errors or warnings.
Change-Id: Ic43fcaed5a8b19dbd5634c17f34a159803ba8577
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42207
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
- Move the GPIOs that are likely to be volteer-specific (mostly
peripherals) to reside in variants/volteer/gpio.c so that
variants don't have to override too many GPIO settings.
- Modify malefor's gpio.c to adjust for the changes to baseboard's
gpio.c.
- Remove unused GPP_C3 (USB4_SMB_SCL) and GPP_C4 (USB4_SMB_SCA)
settings.
- Remove unused GPP_D9, GPP_D10, GPP_D11, and GPP_D12 settings.
- Remove unused GPP_E8 (SLP_S0IX), COEX, WWAN, and SNDW related
settings for malefor.
- Remove unused GPP_R4 (HDA_RST_L) setting.
BUG=b:157597158
TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot
volteer SKU4 to kernel.
Change-Id: Ib2f384f539d55a3a8d4a7608336ef22aca3d8c4f
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
The Connect Topology Command(CNTP) is sent with default timeout value
(0x1388) along with FW CM. The CNTP is supposed to be skipped while
using SW CM. While transition from FW CM to SW CM, the default timeout
value could cause boot time delay up to ~10 seconds. Set this FSPS UPD
ITbtConnectTopologyTimeoutInMs to be 0 in order to avoid the 10 seconds
delay. Future FSP release will evaluate this ITbtConnectTopologyTimeoutInMs
value. While FSP finds this UPD value being 0, FSP will skip sending CNTP.
BUG=b:155893566
TEST=Built image with SW CM Thunderbolt firmware and verified no
outstanding delay time while using FSP v3197 during boot to kernel.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I47e3519fd818cb56e6abd16464d8370ffddabc5b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42056
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With SoundWire and USB4 enabled some boards are running out of
memory with all of the ACPI devices and properties. Increase
the heap size to accommodate.
BUG=b:147462631
TEST=Successfully boot on volteer SKU5 board with SoundWire enabled,
before boot was failing with "Error! memalign: Out of memory"
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I0245bdfad93b381871514578e66640e7fe6fa5c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
This patch adds correct PL2 baseline setting and PsysPL2 for different
SKUs. There is no way to identify the barral jack power rating, the
assumption is following that ships with the product:
1. i3/i5/i7: 90W BJ
2. Celeron/Pentium: 65W BJ
For Type-C adapter, we don't have Pcritcial (10ms) data, keeps the
original settings as 90% of adapter rating for PsyspL2/PL4 and PL2
as min(PL2, 0.9n) where n is adapter rating power.
BUG=b:143246320
TEST=Run with U62 and Celeron CPU and ensure the PL2 settings are correct
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Change-Id: If7de614d58366158a566563990ee1ecc8c0110bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
This reverts commit 04506e2987.
Turned out that `dev->command` is only a `u8` and the way it's used
here is wrong: It is not supposed to reflect the state of the register
but only gathers (lower) bits to be enabled during allocation.
Change-Id: Iacd2b753939e8adcf5aedd4b9cf101638a324aa6
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42163
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Commit 5ac723e (nb/intel: Fix 16-bit read/write PCI_COMMAND register)
uses `pci_read_config8` to read the PCI command register, which does not
correspond with what has been stated in the commit message. Moreover, it
potentially breaks things, as the upper byte of the PCI command register
is now being cleared.
So, restore the original behaviour of the code, using 16-bit accesses.
Fixes: 5ac723e (nb/intel: Fix 16-bit read/write PCI_COMMAND register)
Change-Id: Id2c42ea8551a2fa2fa5c64e8fff8940d8304fbe0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42148
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The max98357a_platform_driver will turn on/off the speaker enable gpio
based on use, so configure it low to save power.
BUG=None
TEST=Built dedede and tested speaker playback working.
We are seeing a power saving of ~10mW.
Change-Id: I070679457b06cb82633c1197b893a5d89c8b2cf0
Signed-off-by: Usha P <usha.p@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
As per JEDEC spec, manufacturer part name should be set to
blank (0x20). This change updates gen_spd.go to set bytes 329-348 as
0x20 and regenerates SPDs for TGL and JSL.
Change-Id: I6af18d89afd7264cec7e54b38e95df83d55aa058
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42023
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The orientation, etc. -switch properties are supposed to use the
connector device (underneath the MUX device) that belongs to the port
number in question. This patch finds the CONx device and uses that
to pass to the acpigen API.
BUG=b:154620502
TEST=on Volteer, dump SSDT and verify the *-switch properties point to
\_SB.PCI0.PNC.MUX.CON0 and CON1
Change-Id: Ie65c2d750f3d9f83285e0e4cc9642110c804bbad
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42045
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
A function pci_dev_disable_bus_master() is created. This function
can be used to disable Thunderbolt PCIe root ports, bridges and
devices for Vt-d based security platform at end of boot service.
BUG=None
TEST=Verified PCIe device bus master enable bit is cleared.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Ie92a15bf2c66fdc311098acb81019d4fb7f68313
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
All variants are overriding soc_common_config, so source it from
overridetree and remove entry from baseboard devicetree.
Only keeping chipset lockdown config in baseboard which will be
common across all the variants.
BUG=None
BRANCH=None
TEST=Checked code compilation and lockdown config is applied to all variants
Change-Id: I23714b721a6bb0bac785f046586790a98dc5b646
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
When MRC cached data update is performed, messages are written to
event log, which is flash based. For system that does not have flash
based event log, the messages are lost.
Added corresponding BIOS_DEBUG messages.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I1ef4794151fea7213c8317ddc898b0e37da280b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41981
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change allows treating the PMC as a 'hidden' PCI device on Jasper
Lake, so that the MMIO & I/O resources can be exposed as belonging to
this device, instead of the system agent and LPC/eSPI.
Change-Id: Ie07987c68388d03359c43f64a849dc6e3f94676e
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42018
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
While working on psp_verstage, I noticed that this file had a number of
unnecessary includes. Remove them.
BUG=b:158124527
TEST=Build & boot psp_verstage on trembyle
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I32188e2dda39ece9dc98d0344824d997a2e80303
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42065
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Currently, having libgfxinit try to enable VGA will result in a hang.
On the Asrock B85M Pro4, DDI E (VGA) was not being enabled in coreboot,
so it did not hang. However, this renders Linux's i915 driver unable to
use VGA at all. In absence of monitors with digital inputs, this is bad.
To work around this problem, mark DDI E as enabled, and comment out VGA
from gma-mainboard.ads for the time being. This allows one to use a VGA
monitor, even if it only works after Linux drivers have taken over.
Change-Id: Idd6a9e8515a1065ad3c6ddf136896fef9f0fa732
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42099
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner
Port commit d7b88dcb (mb/google/x86-boards: Get rid of power button
device in coreboot) to AMD AGESA Hudson boards.
No idea, if this is correct for the two laptops. The Lenovo G505s also
incorrectly defines two power buttons.
[ 0.911423] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.911434] ACPI: Power Button [PWRB]
[ 0.911493] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.912326] ACPI: Power Button [PWRF]
If the generic power button device is needed, the POWER_BUTTON flag
should be set in FADT.
The GPE ACPI code seems to originate from commit 806def8c (I missed the
svn add on r3787. These are the additional files., Add AMD dbm690t ACPI
support.), and was copied over.
Change-Id: I88950e15faf1b90ca6e688864bac40bf9779c32e
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Port commit d7b88dcb (mb/google/x86-boards: Get rid of power button
device in coreboot) to AMD AGESA Hudson boards
(SOUTHBRIDGE_AMD_PI_AVALON).
The GPE ACPI code seems to originate from commit 806def8c (I missed the
svn add on r3787. These are the additional files., Add AMD dbm690t ACPI
support.), and was copied over.
Change-Id: Ibeec73c15f2282f7ab0be88f96693bcb551b3e45
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40753
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
This change adds device_operations for UART MMIO devices that provides
following operations:
1. uart_acpi_name: Returns ACPI name of UART device. Generation of
UART device node is not yet moved to SSDT, but will be done in
follow-up CLs.
2. scan_bus: Uses scan_static_bus to scan devices added under the UART
devices. This allows mainboard to add devices under the UART MMIO
device.
Change-Id: I18abbe88952e7006668657eb1d0c177e53e95850
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42068
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
According to the Wilco EC spec the BTSC bit of PWSR is always cleared
when PWSR is read so that battery status change events are only
triggered one time. Testing of the Wilco EC has verified this behavior.
This changes the way in which the battery status change bit is used from
checking the bit state against the previous value to always issuing a
battery event when the BTSC bit is set. The other bits in PWSR indicate
state directly and do not behave like the BTSC bit.
BUG=b:157113138
TEST=Deploy on Drallion and verify that battery events are generated
BRANCH=drallion, sarien
Signed-off-by: Mathew King <mathewk@chromium.org>
Change-Id: I8fbf2ee1158ddd790b04a20b1eb27a6cce4f5c81
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42017
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Enable Cr50 update in recovery mode, so that we can at least still
update the process for most cases (that an update is pending in recovery
mode is not impossible but should be unlikely in the field).
Leave manual recovery unaffected so at least that would still work even
if Cr50 wedges in a weird way that it thinks it has an update on every
boot or something.
Setting the recovery_reason to VB2_RECOVERY_TRAIN_AND_REBOOT allows the
update to be applied.
BUG=b:154071064
BRANCH=none
TEST=builds
Thanks to Julius Werner for the suggested fix.
Change-Id: Iba341a750cce8334da4dcf6353ca8cd1268d170f
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This change adds memory parts used by variant wheelie to
mem_list_variant.txt and generates DRAM IDs allocated to these parts.
BUG=b:157862308
Change-Id: I53f6f5c832cd40068a6d4379ace849f6e8ad7a91
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41990
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GENERIC_SPD_BIN assumes that the SPDs are all placed in mainboard and
have .spd.hex as the suffix. Disable GENERIC_SPD_BIN for dedede as it
already provides its own rules for SPD inclusion. In follow up
changes, GENERIC_SPD_BIN can be re-enabled by updating gen_spd.go tool
to use similar suffixes and allowing different paths to be provided
for SPD by mainboard.
Change-Id: If10144e0b2bd67884af69f60e5117e388a3ae5da
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42054
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds mem_list_variant.txt that contains the list of
memory parts used by waddledoo and Makefile.inc generated by
gen_part_id.go using mem_list_variant.txt.
In the final change of the series, all dedede variants will be
switched from using the current SPDs to new auto-generated SPDs.
Differences in auto-generated SPD from current SPD are as follows:
Part: MT53E512M32D2NP-046 WT:E
Byte# Current New Explanation
4 0x15 0x16 This part has only 1 die. Hence,
density per die is 16Gb.
6 0x90 0x04 1 die in package and 2 channels per
die.
9 0x40 0x00 Unused by MRC.
19 0x0F 0xFF As per JEDEC spec, tckMax should be
100ns. So, value should be 0xFF as
per datasheet.
123 0x00 0xE5 Fine offset for taa. Expected value
is 0xE5 as per datasheet.
125 0xE1 0xE0 Fine offset for tckMin. As per
datasheet tckMin is 0.468ns. So, this
comes out to be 0xE0.
Additionally, manufacturer name bytes are set to 0.
Part: NT6AP256T32AV-J2
Waddledoo started assigning DRAM part IDs from 1. So, this change
fills in Nanya part as ID 0 (though it is currently unused).
Change-Id: I3879c4f3ad942eb349b52aad397333f576599bbd
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
This change adds mem_list_variant.txt that contains the list of
memory parts used by wheelie and Makefile.inc generated by
gen_part_id.go using mem_list_variant.txt.
In the final change of the series, all dedede variants will be
switched from using the current SPDs to new auto-generated SPDs.
Differences in auto-generated SPD from current SPD are as follows:
Part: MT53E512M32D2NP-046 WT:E
Byte# Current New Explanation
4 0x15 0x16 This part has only 1 die. Hence,
density per die is 16Gb.
6 0x90 0x04 1 die in package and 2 channels per
die.
9 0x40 0x00 Unused by MRC.
19 0x0F 0xFF As per JEDEC spec, tckMax should be
100ns. So, value should be 0xFF as
per datasheet.
123 0x00 0xE5 Fine offset for taa. Expected value
is 0xE5 as per datasheet.
125 0xE1 0xE0 Fine offset for tckMin. As per
datasheet tckMin is 0.468ns. So, this
comes out to be 0xE0.
Additionally, manufacturer name bytes are set to 0.
Change-Id: If307bfb1d376e32af08af4f020f9e125f6a415dd
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41879
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
This change adds mem_list_variant.txt that contains the list of
memory parts used by waddledee and Makefile.inc generated by
gen_part_id.go using mem_list_variant.txt.
In the final change of the series, all dedede variants will be
switched from using the current SPDs to new auto-generated SPDs.
Differences in auto-generated SPD from current SPD are as follows:
Part: MT53E512M32D2NP-046 WT:E
Byte# Current New Explanation
4 0x15 0x16 This part has only 1 die. Hence,
density per die is 16Gb.
6 0x90 0x04 1 die in package and 2 channels per
die.
9 0x40 0x00 Unused by MRC.
19 0x0F 0xFF As per JEDEC spec, tckMax should be
100ns. So, value should be 0xFF as
per datasheet.
123 0x00 0xE5 Fine offset for taa. Expected value
is 0xE5 as per datasheet.
125 0xE1 0xE0 Fine offset for tckMin. As per
datasheet tckMin is 0.468ns. So, this
comes out to be 0xE0.
Additionally, manufacturer name bytes are set to 0.
Part: NT6AP256T32AV-J2
Byte# Current New Explanation
4 0x14 0x15 This part has only 1 die. Hence,
density per die is 8Gb.
6 0x90 0x04 1 die in package and 2 channels per
die.
Manufacturer name bytes are set to 0.
Change-Id: I7a68a29ca3632e22f3960c9fc44acf3ce4f87c9c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41878
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
This change adds the following memory parts to LP4x global list and
generates SPDs using gen_spd.go for TGL and JSL:
1. MT53E512M32D2NP-046 WT:E
2. K4U6E3S4AA-MGCR
3. H9HCNNNCPMMLXR-NEE
4. K4UBE3D4AA-MGCR
BUG=b:157862308, b:157732528
Change-Id: Ib7538247d39dfe5faab277d646f87f09103d6969
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41989
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Now that volteer is moved to using the auto-generated SPDs, we no
longer need the spd/ folder under each variant. Hence, this change
drops the spd/ folders and the SPD files within them.
BUG=b:156126658
Change-Id: Icb36adeb11fd68a84df5b225db32fb8d840a530f
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41619
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds mem_list_variant.txt that contains the list of
memory parts used by volteer and Makefile.inc generated by
gen_part_id.go using mem_list_variant.txt.
In the final change of the series, all volteer variants will be
switched from using the current SPDs to new auto-generated SPDs.
Differences in auto-generated SPD from current SPD are as follows:
Part: K4U6E3S4AA-MGCL
Byte# Current New Explanation
6 0x95 0x94 Signal loading is not used by
MRC. Set bits 1:0 to 00.
16 0x48 0x00 Signal loading is not used by
MRC. Set to 0x00.
19 0x0F 0xFF As per JEDEC spec, tckMax should be
100ns. So, value should be 0xff as
per datasheet.
21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS
latencies 20,24,28,32,36. So value
should be 0x54, 0x05.
24 0x8C 0x87 taa is .468ns * CAS-36 which results
in byte 24 being 0x87 as per datasheet.
123 0x00 0xE5 Fine offset for taa. Expected value
is 0xE5 as per datasheet.
124 0x7F 0x00 Fine offset for tckMax. Expected
value is 0x00 as per datasheet.
125 0xE1 0xE0 Fine offset for tckMin. As per
datasheet tckMin is 0.468ns. So, this
comes out to be 0xE0.
Part: K4UBE3D4AA-MGCL
Byte# Current New Explanation
6 0xB5 0xB4 Signal loading is not used by
MRC. Set bits 1:0 to 00.
16 0x48 0x00 Signal loading is not used by
MRC. Set to 0x00.
19 0x0F 0xFF As per JEDEC spec, tckMax should be
100ns. So, value should be 0xff as
per datasheet.
123 0x00 0xE5 Fine offset for taa. Expected value
is 0xE5 as per datasheet.
Part: H9HCNNNBKMMLXR-NEE
Byte# Current New Explanation
6 0x95 0x94 Signal loading is not used by
MRC. Set bits 1:0 to 00.
16 0x48 0x00 Signal loading is not used by
MRC. Set to 0x00.
19 0x0F 0xFF As per JEDEC spec, tckMax should be
100ns. So, value should be 0xff as
per datasheet.
21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS
latencies 20,24,28,32,36. So value
should be 0x54, 0x05.
24 0x8C 0x87 taa is .468ns * CAS-36 which results
in byte 24 being 0x87 as per datasheet.
123 0x00 0xE5 Fine offset for taa. Expected value
is 0xE5 as per datasheet.
124 0x7F 0x00 Fine offset for tckMax. Expected
value is 0x00 as per datasheet.
125 0xE1 0xE0 Fine offset for tckMin. tckMin is
calculated as (1/4267)*2 which comes
out to be 0.46871. Some datasheets
round this down to 0.468 and others
round it up to 0.469. JEDEC spec uses
0.468. As per that, this value comes
out to be 0xE0.
Part: H9HCNNNFAMMLXR-NEE
Byte# Current New Explanation
4 0x15 0x16 As per datasheet, density is 16Gb per
logical channel. So value should be 0x16.
6 0xF9 0xB8 This device has 4 logical dies
instead of 8. Also, signal loading is
not used by MRC.
16 0x48 0x00 Signal loading is not used by
MRC. Set to 0x00.
20,21, 0x92,0x55, 0x12,0x29, As per datasheet, part supports CAS
22 0x00 0x15 latencies 6,10,16,22,26,32,36,40. So value
should be 0x12,0x29,0x15.
24 0x8C 0x96 taa is .468ns * CAS-40 which results
in byte 24 being 0x96 as per datasheet.
29,30 0xE0,0x0B 0xC0,0x08 As per datasheet, this corresponds to
280ns in MTB units which is 0x08C0.
31,32 0xF0,0x05 0x60,0x04 As per datasheet, this corresponds to
140ns in MTB units which is 0x04C0.
123 0x00 0xE2 Fine offset for taa. Expected value
is 0xE2 as per datasheet.
124 0x7F 0x00 Fine offset for tckMax. Expected
value is 0x00 as per datasheet.
125 0xE1 0xE0 Fine offset for tckMin. tckMin is
calculated as (1/4267)*2 which comes
out to be 0.46871. Some datasheets
round this down to 0.468 and others
round it up to 0.469. JEDEC spec uses
0.468. As per that, this value comes
out to be 0xE0.
Part: MT53E1G32D2NP-046 WT:A
Byte# Current New Explanation
4 0x15 0x16 As per datasheet, density is 16Gb per
logical channel. So value should be 0x16.
5 0x21 0x29 As per datasheet, this part has 17row
address bits and 10column address
bits. This results in 0x29.
6 0xB5 0x94 This device has 2 logical dies. Also,
MRC does not use signal loading.
16 0x48 0x00 Signal loading is not used by
MRC. Set to 0x00.
12 0x0A 0x02 As per datasheet, this is 1rank and
16-bit wide channel. So, value should
be 0x02.
21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS
latencies 20,24,28,32,36. So value
should be 0x54, 0x05.
24 0x8C 0x87 taa is .468ns * CAS-36 which results
in byte 24 being 0x87 as per datasheet.
29,30 0xC0,0x08 0xE0,0x0B As per datasheet, this corresponds to
380ns in MTB units which is 0x0BE0.
31,32 0x60,0x04 0xF0,0x05 As per datasheet, this corresponds to
190ns in MTB units which is 0x05F0.
123 0x00 0xE5 Fine offset for taa. Expected value
is 0xE5 as per datasheet.
124 0x7F 0x00 Fine offset for tckMax. Expected
value is 0x00 as per datasheet.
125 0xE1 0xE0 Fine offset for tckMin. As per
datasheet tckMin is 0.468ns. So, this
comes out to be 0xE0.
BUG=b:147321551,b:155423877
Change-Id: I3998b2cd91020130bacf371fce9b0d307304acbe
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41617
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This change adds mem_list_variant.txt that contains the list of
memory parts used by halvor and Makefile.inc generated by
gen_part_id.go using mem_list_variant.txt.
In the final change of the series, all volteer variants will be
switched from using the current SPDs to new auto-generated SPDs.
Differences in auto-generated SPD from current SPD are as follows:
Part: H9HKNNNCRMBVAR-NEH
Byte# Current New Explanation
4 0x16 0x15 As per datasheet, density is 8Gb per
logical channel. So value should be 0x15.
6 0xB9 0x94 Signal loading is not used by
MRC. Set bits 1:0 to 00. 2 channels 2
dies. Hence, 0x94
19 0x0F 0xFF As per JEDEC spec, tckMax should be
100ns. So, value should be 0xff as
per datasheet.
29,30 0xE0,0x0B 0xC0,0x08 As per datasheet, this corresponds to
280ns in MTB units which is 0x08C0.
31,32 0xF0,0x05 0x60,0x04 As per datasheet, this corresponds to
140ns in MTB units which is 0x0460.
125 0xE1 0xE0 Fine offset for tckMin. tckMin is
calculated as (1/4267)*2 which comes
out to be 0.46871. Some datasheets
round this down to 0.468 and others
round it up to 0.469. JEDEC spec uses
0.468. As per that, this value comes
out to be 0xE0.
Part: MT53E1G64D4SQ-046 WT:A
Byte# Current New Explanation
5 0x21 0x29 As per datasheet, this part has 17row
address bits and 10column address
bits. This results in 0x29.
6 0xB9 0x94 Signal loading is not used by
MRC. Set bits 1:0 to 00. 2 channels,
2 dies. Hence, 0x94.
19 0x0F 0xFF As per JEDEC spec, tckMax should be
100ns. So, value should be 0xff as
per datasheet.
125 0xE1 0xE0 Fine offset for tckMin. As per
datasheet tckMin is 0.468ns. So, this
comes out to be 0xE0.
BUG=b:147321551,b:155423877
Change-Id: I28b065a00380516d8686279a92ef68b9f17e2f65
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41616
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds mem_list_variant.txt that contains the list of
memory parts used by malefor and Makefile.inc generated by
gen_part_id.go using mem_list_variant.txt.
In the final change of the series, all volteer variants will be
switched from using the current SPDs to new auto-generated SPDs.
Differences in auto-generated SPD from current SPD are as follows:
Part: K4U6E3S4AA-MGCL
Byte# Current New Explanation
6 0x95 0x94 Signal loading is not used by
MRC. Bits 1:0 set to 0.
16 0x48 0x00 Signal loading is not used by
MRC. Set to 0x00.
19 0x0F 0xFF As per JEDEC spec, tckMax should be
100ns. So, value should be 0xff as
per datasheet.
21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS
latencies 20,24,28,32,36. So value
should be 0x54, 0x05.
24 0x8C 0x87 taa is .468ns * CAS-36 which results
in byte 24 being 0x87 as per datasheet.
123 0x00 0xE5 Fine offset for taa. Expected value
is 0xE5 as per datasheet.
124 0x7F 0x00 Fine offset for tckMax. Expected
value is 0x00 as per datasheet.
125 0xE1 0xE0 Fine offset for tckMin. As per
datasheet tckMin is 0.468ns. So, this
comes out to be 0xE0.
BUG=b:155239397,b:147321551
Change-Id: I8b8bdc55314f538aff4dd1944a0b745357744d8c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41615
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds mem_list_variant.txt that contains the list of
memory parts used by ripto and Makefile.inc generated by
gen_part_id.go using mem_list_variant.txt.
In the final change of the series, all volteer variants will be
switched from using the current SPDs to new auto-generated SPDs.
Differences in auto-generated SPD from current SPD are as follows:
Part: K4U6E3S4AA-MGCL
Byte# Current New Explanation
6 0x95 0x94 Signal loading is not used by
MRC. Bits 1:0 set to 0.
16 0x48 0x00 Signal loading is not used by
MRC. Set to 0x00.
19 0x0F 0xFF As per JEDEC spec, tckMax should be
100ns. So, value should be 0xff as
per datasheet.
21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS
latencies 20,24,28,32,36. So value
should be 0x54, 0x05.
24 0x8C 0x87 taa is .468ns * CAS-36 which results
in byte 24 being 0x87 as per datasheet.
123 0x00 0xE5 Fine offset for taa. Expected value
is 0xE5 as per datasheet.
124 0x7F 0x00 Fine offset for tckMax. Expected
value is 0x00 as per datasheet.
125 0xE1 0xE0 Fine offset for tckMin. As per
datasheet tckMin is 0.468ns. So, this
comes out to be 0xE0.
BUG=b:155239397,b:147321551
Change-Id: Ibb06443a5c7fd80915f66b806cdd7c3ae1275b05
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41614
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change uses gen_spd.go and global_lp4x_mem_parts.json.txt to
generate SPD files for currently known LP4x memory parts that
can be used with JSL-based mainboards.
Following files are added:
1. spd-*.hex: SPD files auto-generated by gen_spd.go
2. spd_manifest.generated.txt: Manifest file auto-generated by
gen_spd.go
Mainboards can use the SPD files from SoC directly when creating
SPD binary to add to CBFS.
Change-Id: Ic52506b809c66b9f7cf25a100a959d85c67addf2
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41876
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change uses gen_spd.go and global_lp4x_mem_parts.json.txt to
generate SPD files for currently known LP4x memory parts that can be
used with TGL-based mainboards.
Following files are added:
1. spd-*.hex: SPD files auto-generated by gen_spd.go
2. spd_manifest.generated.txt: Manifest file auto-generated by
gen_spd.go
Mainboards can use the SPD files from SoC directly when creating SPD
binary to add to CBFS.
BUG=b:147321551,b:155239397
Change-Id: Ic3935e4f6d106cbdf496fdfa28a0991e2d238fd9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41875
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
This change adds a JSON file (`global_lp4x_mem_parts.json.txt`)
containing global list of LP4x memory parts to live along with the spd
tools since the part information is not really any SoC or mainboard
dependent and comes directly from the part datasheet. It can be shared
by mainboards based on different platforms supported by the tools.
BUG=b:155239397,b:147321551
Change-Id: I9e2f98fc9c1c8a7f73c9a1bfab22c996de222a32
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41874
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Serial Presence Detect (SPD) data for memory modules is used by Memory
Reference Code (MRC) for training the memory. This SPD data is
typically obtained from part vendors but has to be massaged to format
it correctly as per JEDEC and MRC expectations. There have been
numerous times in the past where the SPD data used is not always
correct.
In order to reduce the manual effort of creating SPDs and generating
DRAM IDs, this change adds tools for generating SPD files for LPDDR4x
memory used in memory down configurations on Intel Tiger Lake (TGL)
and Jasper Lake (JSL) based platforms. These tools generate SPDs
following JESD209-4C specification and Intel recommendations (doc
Two tools are provided:
* gen_spd.go: Generates de-duplicated SPD files using a global memory
part list provided by the mainboard in JSON format. Additionally,
generates a SPD manifest file (in CSV format) with information about
what memory part from the global list uses which of the generated
SPD files.
* gen_part_id.go: Allocates DRAM strap IDs for different LPDDR4x
memory parts used by the board. Takes as input list of memory parts
used by the board (with one memory part on each line) and the SPD
manifest file generated by gen_spd.go. Generates Makefile.inc for
integrating the generated SPD files in the coreboot build.
BUG=b:155239397,b:147321551
Change-Id: Ia9b64d1d48371ccea1c01630a33a245d90f45214
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
This fixes a logic bug in how timeouts are reported back. In the
timeout case, the original code would return -1 instead of 0. All call
sites expect a return value of 0 as the timeout indicator.
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Change-Id: I81a888aa0a1544e55e6a680be8f3b7f6e0d87812
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41854
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Advertising SMI triggers in FADT is only valid if we exit with
SMI installed. There has been some experiments to delay SMM
installation to OS, yet there are new platforms that allow some
configuration access only to be done inside SMM.
Splitting static HAVE_SMI_HANDLER variable helps to manage cases
where SMM might be both installed and cleared prior to entering
payload.
Change-Id: Iad92c4a180524e15199633693446a087787ad3a2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41910
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
If running on older (like before 2.4.0) version of QEMU there is
no SMI support, so never advertise SMI in FADT for the emulation.
Behaviour if ACPI daemon tries to raise SMI under these conditions
is unknown.
Change-Id: I170058793798648c6713de1530d89ec2ac53e39a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This adds a hook so that a payload can optionally perform USB service
functions in conjunction with regular USB port status polling. In
particular, this allows depthcharge to control the state of an
external USB mux. Some SoCs like Tiger Lake have a USB mux for Type-C
ports that must be kept in sync with the state of the port as reported
by the TCPC. This can be achieved by hooking into the poll routine to
refresh the state of the USB mux.
BUG=b:149883933
TEST=booted into recovery from Type-C flash drive on volteer
Change-Id: Ic6c23756f64b891b3c5683cd650c605b8630b0fb
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42072
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
We decided to store the FSG on eMMC instead of SPI flash, so we don't
need this region anymore. Getting rid of it allows us to put more space
into CBFS (to store hi-res bitmaps). Also grow VPD by some remaining
amount to keep the FMAP alignment reasonable.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: If73450b65718affae71b6ada70ded5c5f45cfb4c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41980
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philip Chen <philipchen@google.com>
This change adds a helper function set_mmio_dev_ops() in chip.c which
is used for setting the dev->ops for MMIO devices based on the
comparison of MMIO address in device tree to the pre-defined base
addresses in iomap.h.
Call to i2c_acpi_name() is replaced with set_mmio_dev_ops and scope of
i2c_acpi_name is restricted to i2c.c since it is not required to be
exposed out of that file.
Change-Id: I31f96cfe8267b0df37012baeb7cfcaec9c2280f6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
There have been changes to the way device properties are supported
in Linux[1] and Windows[2] which add flexibilty:
- non-standard UUIDs can be used instead of only ACPI_DP_UUID
- support for multiple different packages within the _DSD that
associate different properties with unique UUIDs.
To handle this I extracted the part that does the write of UUID and
properties to a separate function and defined a new PACKAGE type
which has the custom UUID as a name and can be used the same way that
child properties are today.
For example a PCIe root port for a USB4 port has a standard property
indicating the USB4 reference, and then two custom properties which
are defined for different attributes.
Example code:
/* Create property table */
acpi_dp *dsd = acpi_dp_new_table("_DSD");
acpi_dp_add_reference(dsd, "usb4-port", usb4_path);
/* Add package for hotplug */
acpi_dp *pkg = acpi_dp_new_table("6211e2c0-58a3-4af3-90e1-927a4e0c55a4");
acpi_dp_add_integer(pkg, "HotPlugSupportInD3", 1);
acpi_dp_add_package(dsd, pkg);
/* Add package for external port info */
pkg = acpi_dp_new_table("efcc06cc-73ac-4bc3-bff0-76143807c389");
acpi_dp_add_integer(pkg, "ExternalFacingPort", 1);
acpi_dp_add_package(dsd, pkg);
/* Write all properties */
acpi_dp_write(dsd);
Resulting ACPI:
Scope (\_SB.PCI0.TRP0)
{
Name (_DSD, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301")
Package ()
{
Package () { "usb4-port", \_SB.PCI0.TDM0.RHUB.PRTA }
},
ToUUID ("6211e2c0-58a3-4af3-90e1-927a4e0c55a4"),
Package ()
{
Package () { "HotPlugSupportInD3", One }
},
ToUUID ("efcc06cc-73ac-4bc3-bff0-76143807c389"),
Package ()
{
Package () { "ExternalFacingPort", One },
}
})
}
[1] https://patchwork.kernel.org/patch/10599675/
[2] https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports
Change-Id: I75f47825bf4ffc5e9e92af2c45790d1b5945576e
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42047
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add PCIe enumeration and resource assignment/allocation.
Xeon-SP processor family has split IIO design, where PCIe domain 0 is
split into multiple stacks. Each stack has its own resource ranges (eg.
IO resource, mem32 resource, mem64 resource). The stack itself is not
PCIe device, it does not have config space to be probed/programmed.
The stack is programmed by FSP. coreboot needs to take into account of
stack when doing PCIe enumeration and resource allocation.
Current coreboot PCIe resource allocator does not support the concept of
split IIO stack, thus entire support is done locally in this patch.
In near future, improvements will be done, first generalize for xeon-sp,
then generalize for coreboot PCIe device code.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com>
Change-Id: If461b1dc1f313d98b676dc9e91d08a1dbb9cb388
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40110
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
offsets for ACPI_PM are incorrectly configured for picasso SoC.
Especially incorrect ACPI_PM_TMR_BLK makes kernel to spend 10 sec for
trying to testing it on wrong address.
Fix them to correct offset with hack for GPE0_BLK.
BUG=b:147044624
TEST=build and boot on trembyle; PM Timer error is gone
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I6adf71479c30f5b6751a21edc4bfa311ddbef5ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41128
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
If the device is missing the HID, the code would previously leave an
open scope and device on the stack.
BUG=b:154756391
TEST=Verify stack ACPI stack does not exceed limit on Trembyle.
Fixes: a1c82c5ebe ("drivers/generic/max98357a: Allow custom _HID from config")
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I798ed08ef0a0575def12937a66a7ce99f743e60d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Lower 20bits of TOLUD and TOLM registers include 19 reserved bits and
1 lock bit. If lock bit is set, then systemagent.asl would end up
reporting the base address of low MMIO incorrectly i.e. off by 1.
This change masks the lower 20 bits of TOLUD and TOM registers when
exposing it in the ACPI tables to ensure that the base address of low
MMIO region is reported correctly.
Change-Id: Ib0ffd9a332fa9590de63f8828d30daa710fe50db
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41979
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
This change updates hostbridge.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for google/link.
Change-Id: I5345ee22df7da92ee48c718f5bd748d7ea6155f2
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41978
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Lower 20bits of TOLUD and TOLM registers include 19 reserved bits and
1 lock bit. If lock bit is set, then systemagent.asl would end up
reporting the base address of low MMIO incorrectly i.e. off by 1.
This change masks the lower 20 bits of TOLUD and TOM registers when
exposing it in the ACPI tables to ensure that the base address of low
MMIO region is reported correctly.
Change-Id: I1fb52a42e84130d973e0970024e263f443aa0b89
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41977
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
This change updates hostbridge.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for
google/beltino.
Change-Id: I0ba2da441c7b398cc7f84a7ef7a5d233b0365cbe
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41976
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Modify the FCH ACPI devices to query the PCI IRQ mapping registers for
their current IRQ numbers.
BUG=b:139429446, b:154756391
TEST=Boot trembyle and see that I2C and UART devices are finally
functional.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I8f2035f74240ead4089ff4d503dfbeb447cf8de4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41835
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This patch modified the puff fmd files to support CSE Lite SKU.
* Reduce the SI_ALL size to 3MiB since ME binary size is less
than 2.5MiB.
* Increase the FW_MAIN_A/B size to accommodate the ME_RW update
binary with CSE Lite SKU.
BUG=b:154561163
TEST=Build and boot puff with CSE Lite SKU.
Cq-Depend: chrome-internal:3046770
Change-Id: I4d39a1bdeabf48fc740da67539f48a9ff72c442c
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41198
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These build on existing functions but use different object types
in order to provide functions for upcoming changes:
acpigen_write_return_op(): Return an operator.
acpigen_write_if_lequal_op_op(): Check if 2 operands are equal.
acpigen_get_package_op_element(): Read an element from a package
into an operator.
This one just provides the missing helper, the other 3 already exist:
acpigen_get_tx_gpio: Read TX gpio state.
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I1141fd132d6f09cf482f74e95308947cba2c5846
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41985
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Based on schematic and gpio table of halvor, generate gpio setting and
overridetree.cb for halvor.
BUG=b:153680359
TEST=FW_NAME=halvor emerge-volteer coreboot chromeos-bootimage
Verify that the image-halvor.bin is generated successfully.
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: Ic6bd018551be58945742d1a6e7f7c5560f218e40
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41426
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The config option APL_SKIP_SET_POWER_LIMITS was accidentally left out
during the set_power_limits refactor (SHA 2adb50d32e). This patch
reinstates the config option which will cause APL boards to not set any
power limits.
TEST=util/abuild/abuild -p none -t siemens/mc_apl1 -a
Change-Id: Iec9f9f340d50a1212b6ef20c2c0e1b66385ae1b2
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41786
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Right now all FSP2.0 based IA platform doesn't need this driver anymore
hence removing to avoid debug and maintenance effort.
TEST=Verified booting from SATA on SPT/CNP/ICP/TGP PCH platforms.
Change-Id: Ied3832b26ba1fdd4c30fafe8149689a01d302c3e
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41674
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For all of the audio devices in devicetree.cb add the probe matches
that will determine if the device should be enabled or not based on
the selected audio daughter board type.
AUDIO=MAX98357_ALC5682I_I2S: enable max98357 and alc5628, disable others
AUDIO=MAX98373_ALC5682I_I2S: enable max98373 and alc5682, disable others
AUDIO=MAX98373_ALC5682_SNDW: enable soundwire devices, disable others
BUG=b:147462631
TEST=test different device present in ACPI based on fw_config value:
> AUDIO=NONE
ectool cbi set 6 0x00000000 4 2
> AUDIO=MAX98357_ALC5682I_I2S
ectool cbi set 6 0x00000100 4 2
> AUDIO=MAX98373_ALC5682I_I2S
ectool cbi set 6 0x00000200 4 2
> AUDIO=MAX98373_ALC5682_SNDW
ectool cbi set 6 0x00000300 4 2
Change-Id: I5492e8cddcff3ba01023b0daef02be3508d347b0
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41216
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add the current firmware configuration table for the volteer mainboard
and define some actions based on probe results for audio:
- When I2S options are selected disable the SoundWire GPIOs.
- When SoundWire is enabled disable the I2S GPIOs.
- When no audio is enabled disable all the GPIOs.
BUG=b:147462631
TEST=Test that GPIOs are configured as expected based on the current
value of the fw_config field in cbi.
Change-Id: I179f8b6436be83a2b37911777764bd26a0d404b7
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41215
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- Move all audio devices from baseboard to the volteer variant.
- Add max98373 devices and enable the driver
- Disable everything in FSP and let coreboot configure GPIOs.
BUG=b:147462631
TEST=this change makes all audio devices show up in ACPI, so this
was tested by ensuring that all audio devices are present in ACPI.
Change-Id: Ic654ea52a549053622603aa8c81fb37577d4e011
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41214
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This change adds support to sconfig for generating the firmware
configuration field and option definitions in devicetree.cb.
In addition these fields and options can be used to probe for a device
and have that device be disabled if it is not found at boot time.
New tokens:
fw_config: top level token, table can be defined before chips
field: define field in the mask with the start and end bits
option: define option in a field with the value of the field
probe: indicate that a device should probe by field and option
Example:
fw_config
field FEATURE 0 0
option DISABLE 0
option ENABLE 1
end
end
chip drivers/generic/feature
device generic 0 on
probe FEATURE ENABLE
end
end
Variants can add new fields and add new options to existing fields in
overridetree.cb but cannot redefine an existing option.
Devices can have multiple probe tokens, and the device will be considered
to be found if any of them return true.
The output from defining this field are:
1) the various fields and options will be added as macro constants to
static.h and can be used by fw_config for probing.
2) the probe entries will result in a list of fields/options to probe
that is added to the resulting struct device and handled by coreboot.
BUG=b:147462631
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I8aea63e577d933aea09e0d0b09470929cc96e0de
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41440
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This change introduces a new top-level interface for interacting with a
bitmask providing firmware configuration information.
This is motivated by Chromebook mainboards that need to support multiple
different configurations at runtime with the same BIOS. In these
devices the Embedded Controller provides a bitmask that can be broken
down into different fields and each field can then be broken down into
different options.
The firmware configuration value could also be stored in CBFS and this
interface will look in CBFS first to allow the Embedded Controller value
to be overridden.
The firmware configuration interface is intended to easily integrate
into devicetree.cb and lead to less code duplication for new mainboards
that make use of this feature.
BUG=b:147462631
TEST=this provides a new interface that is tested in subsequent commits
Change-Id: I1e889c235a81545e2ec0e3a34dfa750ac828a330
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41209
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
There's not a function that is the equivalent to
x86_setup_mtrrs_with_detect() but not solving for above 4GiB.
Provide x86_setup_mtrrs_with_detect_no_above_4gb() which is the
equivalent to x86_setup_mtrrs_with_detect() but instructs the MTRR
solver to not take into account memory above 4GiB.
BUG=b:155426691
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ia1b5d67d6f139aaa929e03ddbc394d57dfb949e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41897
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Introduce concept of var_mtrr_context object for tracking and
assigning MTRR values. The algorithm is lifted from postcar_loader
code, but it's generalized for different type of users: setting
MSRs explicitly or deferring to a particular caller's desired
actions.
BUG=b:155426691,b:155322763
Change-Id: Ic03b4b617196f04071093bbba4cf28d23fa482d8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The porting of Asus P8Z77-M mainboard required changing certain Super
I/O configuration registers that were ignored in devicetree.cb because
they aren't listed as resources. Add the declaration so they can be
changed.
This change is nowhere near enough as the current structure is
insufficient to allow changing configuration registers in the 0xE?
range, which this board also needs.
TEST=Changes to config regs 0xf4, 0xf5 in LDN 9 are reflected when
inspected using superiotool -d.
Change-Id: Ia31aafda3fa9423d516b5d839ef5265e8e8ccdd2
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41226
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This change updates camera_clock_ctl.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for wdoo.
Change-Id: I76ec29210ecdde728ce55531d2b6657be87ce9da
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41954
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
This change updates gpio_op.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for wdoo.
Change-Id: I3ec442ad85f408135642a112873231ce7d39524e
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
This change updates pch_hda.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for wdoo.
Change-Id: I8e965560518decbfafabe9ac06066d28d59240d0
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41863
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
This change updates scs.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for wdoo.
Change-Id: Ic1b5f3395a1ea8a3dd2ac6b109f9a5abe65d137f
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
This change updates platform.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for wdoo.
Change-Id: Ie55bcd9ac2ca746c046ebe05140b2ac291fb0459
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Update Cooperlake-SP (CPX-SP) FSP header files to WW20 release.
As CPX-SP FSP engineering is on-going (the processor Mass Production
is some time in this year). These header files will be adjusted when
changes are necessary with newer FSP release. This commit corresponds
to FSP release WW20 (tag WHITLEY.0.PRB.0016.D.65).
Also update soc/xeon_sp code file and Skylake-SP header file accordingly
to use FsptPort80RouteDisable instead of PcdPort80RouteDisable.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com>
Change-Id: I8bc6882e47de23d83ba0f521bb12a10dace523ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40034
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
CB:35086 exposed that the devicetree listed an EC chip for which there
is no actual driver; the EC is entirely ACPI code (.asl) included by
the board's ec.asl. Remove the unnecessary EC chip driver from both
boards, as well as the unnecessary Kconfig selection for librem_bdw.
Test: build/boot Librem 13v1, 13v4, verify battery info etc still correct.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Change-Id: I5cb0b51881ab8f14e9ec693485f673f4284b5f14
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41788
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
These changes are in accordance with the documentation:
[*] page 208-209
Intel(R) 64 and IA-32 Architectures, Software Developer’s Manual,
Volume 4: Model-Specific Registers. May 2019.
Order Number: 335592-070US
Tested on OCP Tioga Pass.
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Change-Id: I5e1de8bcb651fb8ae8b106db1978235b0dd84c47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40523
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With this patch, the ThinkLight on the ThinkPad X230 can be controlled
through the OS. This was initially done for the X201 in f63fbdb6:
mb/lenovo/x201: Add support for ThinkLight.
After applying this patch, the light can be controlled like this:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
Or through sysfs at /sys/class/leds/tpacpi::thinklight
Change-Id: Idd93b26f52eccb8fc79888f1e45117f26d694291
Signed-off-by: Stefan Ott <stefan@ott.net>
Tested-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40669
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
ACPI bar was not programmed previously for which is needed to enable SMI's and
to check SMI status registers. The architecture of Lewisburg PCH is very
similar to SunrisePoint PCH thus we can use code from soc/intel/skylake.
TEST=build for Tiogapass and check ACPI base. Log message will now show
pmbase=501 (bit 0 is enable) instead of 0. Check by reading and writing
to io port 0x500.
Change-Id: If5a0c4daabf5c35dc2852434fe46712ac9b06379
Signed-off-by: Rocky Phagura <rphagura@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41680
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
add_register() contained a duplicate check but only compared the new
key to the first (smallest in order) list member. Fix that and factor
the list handling out so it can be used by other functions.
Change-Id: I5a8346f36fa024351e1282c9681868ecf451b283
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41743
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change is based on the concept that system user's (overwrite)
settings are held in VPD_RW region, while system owner's (default)
settings are held in VPD_RO region.
Add VPD_RW_THEN_RO region type, so that VPD_RW region is searched
first to get overwrite setting, otherwise VPD_RO region is searched
to get default setting.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: Icd7cbd9c3fb2a6b02fc417ad45d7d22ca6795457
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41732
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
We want to use the CACHE_ROM_* macros in linker scripts. Avoid
`commonlib/helpers.h` as it contains an ALIGN() macro definition
that conflicts with the ALIGN keyword in linker scripts.
Change-Id: I3bf20733418ca4135f364a3f6489e74d45e4f466
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41785
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This explicitly enables TCSS DMA0 controller and disables
TBT PCIe2 and PCIE3 since they are unused on volteer.
BUG=🅱️146624360
TEST=Built and booted on Volteer.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I05cc9e3964d8037d433fca443be6e8d5b444bbce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41387
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
1. Configure SD card GPIOs.
2. Set SD card power polarity and card detect configs.
SD card CMD. DATA and CLK GPIOs are set for native pad termination
as per recommendation in EDS vol1 section 10.4.10
BUG=b:150872580
TEST=Verify SD card enumeration and read/write transactions.
Change-Id: I90c8ceb85ada23718ff7b6fd7013317c818dd532
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39237
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Until now, the buildOpts.c files were primarily made out of copy-pasted
AGESA options, commented-out definitions and several useless comments;
that is, the materialization of technical debt in GCC-parsable form...
Until now.
It is assumed that the boards in the tree still boot. So, by comparing
their settings, we can extract saner defaults to place into AGESA. Many
of the settings were common across all boards of the same family, so we
promote those values to default settings. In some cases flipping a flag
was required, so the macros to alter that option had to be adapted as
well. Since those AGESA versions are expected to never receive updates,
it should not be a problem to change their files to suit our needs.
As a result, all but two buildOpts.c files now have less than 100 lines.
AGESA f14 boards need less than 50 lines, and f15tn/f16kb just require
about 60 or 70 lines in those files. Hopefully, this will make porting
more mainboards using AGESA f14/f15tn/f16kb a substantially easier task.
TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb
mainboards result in identical coreboot binaries.
Change-Id: Ife1ca5177d85441b9a7b24d64d7fcbabde6e0409
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Determine the TcssDma0 and TcssDma1 enabling based on TBT DMA
controllers setting.
BUG=🅱️146624360
TEST=Booted on Volteer and verified TcssDma0 and TcssDma1 enabling.
lspci shows TcssDma0(0d.2) and TcssDma1(0d.3).
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I61ac4131481374e9a2a34d1a30f822046c3897fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41812
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable heci1 device from devicetree for PCI enumeration. This is
required for ME status dump using HFSTSx resgisters in PCI config
space. Heci1 device is later disabled through heci disable flow.
TEST=Build, boot waddledoo. ME status dump is seen in console logs.
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Change-Id: Icb77db3f0666c2d14ebef2c3214564346d1fd3c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41807
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Matching the same behavior change in depthcharge's FIT image code
(CL:2212466), this patch changes the order in which compat strings
involving revision and SKU numbers are matched when looking for a
compatible device tree. The most precise match (board-revX-skuY) is
still the highest priority, but after that we will now first check for
revision only (board-revX) and then for SKU only (board-skuY). The
reason for this is that SKU differentiation is often added later to a
project, so device trees for earlier revisions may not have SKU numbers
defined. So if we have a rev0 board (with sku0 as the "default SKU",
because the board only started having different SKUs with rev1) we want
it to match the board-rev0 device tree, not board-sku0 which was added
as an alias to board-rev1-sku0 to provide the best known default for
potential later revisions of that SKU.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ia3cf7cbb165170e2ab0bba633fec01f9f509b874
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
On Picasso, DRAM is up by the time FSP-M runs. This change relocates
FSP-M binary to a specific address (0x90000000) in DRAM. Currently,
this address is randomly chosen to ensure it does not overlap any of
the other stages. Once we have a unified memory map set up for
Picasso, this address can be updated along with it.
BUG=b:155322763,b:150746858,b:152909132
Change-Id: I1a49765f00de9f97fa3dbd5bc288a3ed0d7087f6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41828
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The first DRAM part supported by SPD_LPDDR4X_200b_4Gb_3733_DDP_1x16 is
NT6AP256T32AV-J2 so the SPD content is generally extracted from it's
SPD. On the other hand, SPD bytes 4 / 6 / 13 were amended to follow SoC's
requirement.
BUG=b:152277273
BRANCH=None
TEST=build the image successfully.
Change-Id: If6fb0855a961d1c68315a727466bf45569cf2597
Signed-off-by: Marco Chen <marcochen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41813
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch selects the fmd files based on config
BOARD_GOOGLE_BASEBOARD_HATCH and also renames them to
add the baseboard name and layout size tags.
BUG=b:154561163
TEST=Built hatch variants and verified that they select the
right fmd files.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: I5d99ae28cc972ffa635adf100b756c36e168a8f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
All hatch and puff variants use 16MiB SPI flash except the legacy ones
which used 32MiB flash. Kconfig.name is updated to select
BOARD_ROMSIZE_KB_32768 only for the legacy variants and
BOARD_GOOGLE_HATCH_COMMON selects BOARD_ROMSIZE_KB_16384 by default if
BOARD_ROMSIZE_KB_32768 is not selected.
TEST=Verified using abuild --timeless that all hatch variants generate
the same coreboot.rom image with and without this change.
Change-Id: I708506182966936ea38562db8b0325470e34c908
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41662
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Implementation of the ACPI objects for the Type-C Connector Class was
added in the previous patch. This patch removes the functionality from
the ChromeEC's SSDT generator, and uses acpigen_usb instead.
TEST=Verified contents of SSDT are the same.
Change-Id: Icdbcee1f989ee3146f7495e08fc13f9386791858
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41540
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
The Linux ChromeOS EC driver now looks for 3 new properties under each
USBC.CONx device contained within the ChromeOS EC device. These
properties are just a reference to the device that controls the
switches for USB 2/3 muxing, SBU lines, and CC lines. It uses the new
function, soc_get_pmc_mux_device() to retrieve the device.
Change-Id: I03cd83f9b2901b5583053fac8ab6eab64717a07d
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40618
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The ChromeOS EC is adding new entries to its USBC.CONx devices (see later
patch), and it needs to get access to the PMC.MUX device so that its
ACPI path can be retrieved. This provides a weak function to return NULL
for all Intel SoCs except for Tiger Lake, which locates the device if it
is found in the devicetree.
Change-Id: I3fe3ef25e9fac8748142f5b1bd870c9bc70b97ff
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40948
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Allow the ability for chipset or mainboard to choose to
compress FSP-M in cbfs using LZMA or LZ4 routines. However, only
non-XIP platforms will support FSP-M compression. Since the main
cbfs decompression paths are utilized add the appropriate checks
for including compression algorithms under the FSP-M compression
options.
On picasso FSP-M (debug builds) the following savings were measured:
no-compression:
fspm.bin 720896 none
FSP_COMPRESS_FSP_M_LZ4:
fspm.bin 138379 LZ4 (720896 decompressed) -80%
FSP_COMPRESS_FSP_M_LZMA:
fspm.bin 98921 LZMA (720896 decompressed) -86%
BUG=b:155322763,b:150746858,b:152909132
Change-Id: I5c88510c134b56a36ff1cd97a64b51ab2fea0ab0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41450
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
In an attempt to help reduce the amount of static ASL files that are
littered throughout the codebase, pmc.asl was converted to runtime SSDT
generation instead. If future SoCs reuse the same PMC, then this
function can be moved to soc/intel/common/block/pmc for example.
TEST=Verified the following was in the decompiled SSDT:
Scope (\_SB.PCI0)
{
Device (PMC)
{
Name (_HID, "INTC1026") // _HID: Hardware ID
Name (_DDN, "Intel(R) Tiger Lake IPC Controller")
Name (_CRS, ResourceTemplate ()
{
Memory32Fixed (ReadWrite,
0xFE000000, // Address Base
0x00010000, // Address Length
)
})
}
}
Also the following found in linux's /var/log/messages:
"acpi INTC1026:00: GPIO: looking up 0 in _CRS", indicating the PMC
ACPI device was found and its _CRS was locatable.
Change-Id: I665c873d8a80bd503acc4a9f0241c7a6ea425e16
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41408
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Allow the ability for chipset or mainboard to choose to
compress FSP-S in cbfs using LZMA or LZ4 routines. To accomplish
this fsp_load_component() is added as an assist for performing
the necessary logic and allow the caller to provide the destination
selection. Since the main cbfs decompression paths are utilized add
the appropriate checks for including compression algorithms under
the FSP-S compression options.
On picasso FSP-S (debug builds) the following savings were measured:
no-compression:
fsps.bin 327680 none
FSP_COMPRESS_FSP_S_LZ4:
fsps.bin 98339 LZ4 (327680 decompressed) -70%
FSP_COMPRESS_FSP_S_LZMA:
fsps.bin 71275 LZMA (327680 decompressed) -78%
BUG=b:155322763,b:150746858,b:152909132
Change-Id: I8aa5d8c1cbaf4d08f38a918a9031a2570bc5247e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The LZ4 compressed stages assume in-place decompression. The constraints
are validated in cbfstool for _stages_ such that they can be decompressed
in place. However, that is only true for stages. As such, add a wrapper,
cbfs_stage_load_and_decompress(), that handles the LZ4 stage loading case.
BUG=b:155322763,b:150746858,b:152909132
Change-Id: I9525a266250aa6c775283b598c09d4f40692db55
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41755
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Builds where RESET_X86_VECTOR is adjusted would create unintentionally
large bootblock files since id section can move far away from .reset
and .text. Some builds segfault or may try to create close to 4 GB
large intermediate build objects.
For cases where build is successful, id section would not reside within
REGION(program) or REGION(bootblock).
A proper fix to always place the ID data at the end of the coreboot.rom
file is left as follow-up work. For now, just place id section below
.reset.
Change-Id: Idf0e4defcde6d5e264d4752cc93f4ffb6749d287
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40583
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
CB:34634 expanded the VPD code to also be usable from romstage,
shuffling a few things around and adding some extra infrastructure in
the process. Unfortunately, the changes seem to have only been written
with x86 devices in mind and make coreboot always load the whole VPD
FMAP section (not just the used part) on devices where rdev_mmap() is
not a no-op.
This patch rewrites the VPD code to be based on region_device structures
that only represent the VPD area actually used (rather than the whole
FMAP section), and that only get mapped when accessed. (It would be even
better to pull this concept into the VPD decoder itself, but since that
is taken from third-party code and accesses in early stages aren't very
common, let's not go there for now.) It also moves the copying into
CBMEM to romstage so that late romstage accesses can already benefit
from it, and makes early decoding available in all stages because at
this point, why not.
Also fix a long-standing bug where the 'consumed' counter was not reset
between vpd_decode_string() calls to the RO and the RW VPD.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I55a103180b290c1563e35a25496188b6a82e49ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
This change makes the following improvements to debug logging in
resource allocator:
1. Print depth is added to functions in pass 1 to better represent how
the resource requirements of child devices impact the resource windows
for parent bridge.
2. Device path is added to resource ranges to make it easier to
understand what device the resouce ranges are associated with.
3. Prints in pass 2 (update constraints, resource ranges, resource
assignment) are shifted left by 1 to make it easier to visualize
resource allocation for each bridge including domain.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I3356a7278060e281d1a57d253537b097472827a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41478
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit 1726fa1f0ce474cde32e8b32be34a212aff3ffba.
Reason for revert: Resource allocator is split into old(v3) and
new(v4). So, this change to enable hotplug resource allocator for
volteer can land back.
BUG=b:149186922
Change-Id: Ib6a4df610b045fbc885c70bff3698a032b79f770
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41468
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This reverts commit e15f352039a371156ceef37f0434003228166e99.
Reason for revert: Resource allocator is split into old(v3) and
new(v4). So, this change to provide an option to allocate prefetch
memory above 4G boundary can be added back. Since the support for
allocating above 4G boundary is available only in resource allocator
v4, Kconfig option is accordingly updated to add depends on
RESOURCE_ALLOCATOR_V4.
Change-Id: I94e5866458c79c2719fd780f336fb5da71a7df66
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41467
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds back CB:39487 which was reverted as part of
CB:41412. Now that the resource allocator is split into old(v3) and
new(v4), this change adds support for allocating resources above 4G
boundary with the new allocator v4.
Original commit message:
This change adds support for allocating resources above the 4G
boundary by making use of memranges for resource windows enabled in
the previous CL.
It adds a new resource flag IORESOURCE_ABOVE_4G which is used in the
following ways:
a) Downstream device resources can set this flag to indicate that they
would like to have their resource allocation above the 4G
boundary. These semantics will have to be enabled in the drivers
managing the devices. It can also be extended to be enabled via
devicetree. This flag is automatically propagated by the resource
allocator from downstream devices to the upstream bridges in pass
1. It is done to ensure that the resource allocator has a global view
of downstream requirements during pass 2 at domain level.
b) Bridges have a single resource window for each of mem and prefmem
resource types. Thus, if any downstream resource of the bridge
requests allocation above 4G boundary, all the other downstream
resources of the same type under the bridge will be allocated above 4G
boundary.
c) During pass 2, resource allocator at domain level splits
IORESOURCE_MEM into two different memory ranges -- one for the window
below 4G and other above 4G. Resource allocation happens separately
for each of these windows.
d) At the bridge level, there is no extra logic required since the
resource will live entirely above or below the 4G boundary. Hence, all
downstream devices of any bridge will fall within the window allocated
to the bridge resource. To handle this case separately from that of
domain, initializing of memranges for a bridge is done differently
than the domain.
Limitation:
Resources of a given type at the bridge or downstream devices
cannot live both above and below 4G boundary. Thus, if a bridge has
some downstream resources requesting allocation for a given type above
4G boundary and other resources of the same type requesting allocation
below 4G boundary, then all these resources of the same type get
allocated above 4G boundary.
Change-Id: I92a5cf7cd1457f2f713e1ffd8ea31796ce3d0cce
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41466
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The templates for the zork reference boards are still being actively
worked on in the trembyle-bringup branch. Remove the zork template
from the main branch to avoid confusion when trembyle-bringup is
merged.
BUG=b:157099580
BRANCH=none
TEST=N/A
Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org>
Change-Id: I0ff9de959c7b2646b90e68df05f0b2e9bdd60cf7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The majority of the codebase has been converted to use SPDX identifiers
now, so let's enforce those by default. The only exceptions are
src/include and src/lib, which are not being checked since many of the
files there do not have license headers at all. Files with custom
licenses that aren't covered by SPDX can be listed as exceptions at the
top of lint-000-license-headers.
Change-Id: Ie6642153793d5735c74c5950bc9e27ee7eecacbc
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41602
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
mb/google/hatch supports two different reference platforms - Hatch and
Puff. This change adds Kconfigs BOARD_GOOGLE_BASEBOARD_PUFF in
addition to BOARD_GOOGLE_BASEBOARD_HATCH to better organize the
Kconfig selections and reduce redundancy. In addition to this, a new
config BOARD_GOOGLE_HATCH_COMMON is added that selects all the common
configs for both baseboards.
TEST=Verified using abuild --timeless option that all hatch variants
generate the same coreboot.rom image with and without this change.
Change-Id: I46f8b2ed924c10228fa55e5168bf4fe6b41ec36c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41660
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use CAPID0_A to provide information closer to reality.
* Correctly advertise ECC support, max DIMM count and max capacity
* CAPID0_A hasn't changed since SNB, but most EDS mark the bits as
reserved even though they are still used by FSP.
* Assume the same bits for Tiger Lake as for Ice Lake
* Assume the same bits for Skylake as for Coffee Lake
* Add CAPID0_A to Icelake headers
The lastest complete documentation can be found in Document: 341078-002.
Change-Id: I0d8fbb512fccbd99a6cfdacadc496d8266ae4cc7
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Our jenkins instance is also used for flashrom, which can be built with
meson, a mode that we want to be able to test, so add that.
ninja can be used as a backend to both meson and cmake (which coreboot
will use to build cmocka for its unit tests) and may provide some
additional coverage. Plus it's tiny but fast.
Change-Id: If454164852303144eaa72c4071c03ee89e863318
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41731
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Enable Intel Speed Shift Technology (ISST) by default. Disable ISST in
waddledee and waddledoo variants on early phases.
BUG=b:151281860
TEST=Build and boot the mainboard. Ensure that cpufreq driver to
configure P-states is enabled in kernel on boards where board version is
provisioned.
Change-Id: Id65d7981501c2f282e564bfc140f8d499d5713e8
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
This is a copy of the mb/google/zork directory from the chromiumos
coreboot-zork branch. This was from commit 29308ac8606.
See https://chromium.googlesource.com/chromiumos/third_party/coreboot/+/29308ac8606/src/mainboard/google/zork
Changes:
* Minor changes to make the board build.
* Add bootblock.c.
* Modify romstage.c
* Removed the FSP_X configs from zork/Kconfig since they should be
set in picasso/Kconfig. picasso/Kconfig doesn't currently define the
binaries since they haven't been published. To get a working build
a custom config that sets FSP_X_FILE is required.
BUG=b:157140753
TEST=Build trembyle and boot to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I3933fa54e3f603985a0818852a1c77d8e248484f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41581
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It never was in GNVS, it never belonged among the ACPI tables. Having
it in CBMEM, makes it easy to look the location up on resume, and saves
us additional boilerplate.
TEST=Booted Linux on Lenovo/X201s, confirmed ASLS is set and
intel_backlight + acpi_video synchronize, both before and
after suspend.
Change-Id: I5fdd6634e4a671a85b1df8bc9815296ff42edf29
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40724
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Addressing comment from CB:41443 that was received after the change
landed. memranges_create_hole() takes size as the last parameter. So,
the I/O hole created at 0x3b0 needs to set size as 0x3df - 0x3b0 + 1
as 0x3df is the upper limit of that hole.
Change-Id: I08fca283436924427e12c6c69edced7e51db42a9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This adds proper RV2 silicon and Dali SKU detection using both CPUID
information and some bits from silicon_id in the Picasso misc data HOB
that FSP-M stores in memory.
BUG=b:153779573
Change-Id: I589be3bdac4b94785e6ecacf55235be4ad5673d9
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41630
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The Tiger Lake PMC device has a MUX device which is expected to be
exposed in ACPI tables. The MUX device simply has a _HID and _DDN.
The CON devices link the USB-2 and USB-3 port numbers (from SoC
point of view) to the physical connector. They also have orientation
options for the sideband (SBU) and USB High Speed signals (HSL),
meaning that they can be fixed (i.e, another device besides the SoC
controls the orientation, and effectively the SoC is following only
CC1 or CC2 orientation), or they can follow the CC lines.
BUG=b:151646486
TEST=Tested with next patch in series (see TEST line there)
Change-Id: I8b5f275907601960410459aa669e257b80ff3dc2
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Relying on Cmocka packages, which are provided with different OS
distributions, may introduce some problems with setup environments
across developers (e.g. library version mismatch). Instead, let's build
Cmocka from source code, which is now added to git submodules as
3rdparty/cmocka.
Please note, that cmake tool is required for building Cmocka (thus also
coreboot unit tests).
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Change-Id: Ia947c5c60d5c58b76acebe4b614dd427ef995950
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Convert spaces to tabs in volteer variant makefiles, and remove empty
comment lines from file headers.
BUG=none
TEST="emerge-volteer coreboot chromeos-bootimage", flash and verify
volteer boots to kernel.
Change-Id: I6c818c3adcc55ce89707efff6dd9a6bce512daa5
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41587
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change disables the old resource allocator by default and instead
uses the new v4 resource allocator. Only the chipsets that explicitly
select RESOURCE_ALLOCATOR_V3 will continue to use the old v3 resource
allocator.
Change-Id: I2ab9f1d612b5f193f058011a18b1d6373e09f788
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41445
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
This change adds legacy VGA memory (0xa0000 - 0xbffff) as
mmio_resource in northbridge.c read_resources() to match what is
exposed to the OS in hostbridge.asl. It ensures that the resource
allocator does not use this range for dynamic resource allocation.
Change-Id: I24e3aaf97202575fa9df8408366c8db5bea07145
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41482
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
This change adds back support for the resource allocator using
multiple ranges as originally landed in CB:39486(commit hash 3b02006)
and reverted in CB:41413(commit hash 6186cbc). The new resource
allocator can be selected by Kconfig option RESOURCE_ALLOCATOR_V4. It
was identified that there are some AMD chipsets in the tree that do
not really work well with the dynamic resource allocation. Until these
chipsets are fixed, old (v3) and new (v4) of the resource allocator
need to live side-by-side in the tree. There were some other chipsets
in the tree which originally demonstrated problems with the new
resource allocator, but have been since fixed in the tree.
This change picks up the same additions as performed in CB:39486 along
with the following changes:
1. Changes to avoid fixed resources in the entire tree. Use of
search_bus_resources() is replaced with a walk of the entire tree
in avoid_fixed_resources(). This is required to ensure that all fixed
resources added to any device (including domain) are taken into
consideration to avoid overlap during dynamic resource allocation.
2. Changes to set up alignment for memranges when initializing
them. This is done to ensure that the right granularity is used for
IORESOURCE_IO(no special alignment) and IORESOURCE_MEM(4KiB) resource
requests.
3. mark_resource_invalid() is dropped as the resource no longer needs
to be marked in any special way if allocation is not being
done. Instead setting of IORESOURCE_ASSIGNED flag is skipped in this
case.
4. initialize_memranges() is updated to check IORESOURCE_ASSIGNED
instead of base == limit.
Original commit message:
This change updates the resource allocator in coreboot to allow using
multiple ranges for resource allocation rather than restricting
available window to a single base/limit pair. This is done in
preparation to allow 64-bit resource allocation.
Following changes are made as part of this:
a) Resource allocator still makes 2 passes at the entire tree. The
first pass is to gather the resource requirements of each device
under each domain. It walks recursively in DFS fashion to gather the
requirements of the leaf devices and propagates this back up to the
downstream bridges of the domain. Domain is special in the sense that
it has fixed resource ranges. Hence, the resource requirements from
the downstream devices have no effect on the domain resource
windows. This results in domain resource limits being unmodified after
the first pass.
b) Once the requirements for all the devices under the domain are
gathered, resource allocator walks a second time to allocate resources
to downstream devices as per the requirements. Here, instead of
maintaining a single window for allocating resources, it creates a
list of memranges starting with the resource window at domain and then
applying constraints to create holes for any fixed resources. This
ensures that there is no overlap with fixed resources under the
domain.
c) Domain does not differentiate between mem and prefmem. Since they
are allocated space from the same resource window at the domain level,
it considers all resource requests from downstream devices of the
domain independent of the prefetch type.
d) Once resource allocation is done at the domain level, resource
allocator walks down the downstream bridges and continues the same
process until it reaches the leaves. Bridges have separate windows for
mem and prefmem. Hence, unlike domain, the resource allocator at
bridge level ensures that downstream requirements are satisfied by
taking prefetch type into consideration.
e) This whole 2-pass process is performed for every domain in the
system under the assumption that domains do not have overlapping
address spaces.
Noticeable differences from previous resource allocator:
a) Changes in print logs observed due to flows being slightly
different.
b) Base, limit and size of domain resources are no longer updated
based on downstream requirements.
c) Memranges are used instead of a single base/limit pair for
determining resource allocation.
d) Previously, if a resource request did not fit in the available
base/limit window, then the resource would be allocated over DRAM or
any other address space defeating the principle of "no overlap". With
this change, any time a resource cannot fit in the available ranges,
it complains and ensures that the resource is effectively disabled by
setting base same as the limit.
e) Resource allocator no longer looks at multiple links to determine
the right bus for a resource. None of the current boards have multiple
buses under any downstream device of the domain. The only device with
multiple links seems to be the cpu cluster device for some AMD
platforms.
Change-Id: Ide4d98528197bb03850a8fb4d73c41cd2c0195aa
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41443
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
find_pci_tolm() is updated to ensure that it ignores resources that
have a zero size. This change removes the setting of resource flags to
IORESOURCE_ASSIGNED when the resource is not really allocated any
space by the allocator. It also drops the setting of base to limit
since that is not required anymore.
Change-Id: If8c0d4bf1aa9cd6a5bdf056140f65cf2d70ed216
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41566
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change moves the resource allocator functions out of device.c
and into two separate files:
1. resource_allocator_v3.c: This is the old implementation of
resource allocator that uses a single window for resource
allocation. It is required to support some AMD chipsets that do not
provide an accurate map of allocated resources by the time the
allocator runs. They work fine with the old allocator since it
restricts itself to allocations in a single window at the top of the
4G space.
2. resource_allocator_common.c: This file contains the functions that can
be shared by the old and new resource allocator.
Entry point into the resource allocation is allocate_resources() which
can be implemented by both old and new allocators. This change also
adds a Kconfig option RESOURCE_ALLOCATOR_V3 which enables the old
resource allocator. This config option is enabled by default
currently, but in the following CLs this will be enabled only for the
broken boards.
Reason for this split: Both the old and new resource allocators need
to be retained in the tree until the broken chipsets are fixed.
Change-Id: I2f5440cf83c6e9e15a5f22e79cc3c66aa2cec4c0
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41442
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change updates find_pci_tolm() to not consider any unassigned
resources. This is achieved by adding the following checks:
1. Call search_bus_resources() with mask set to IORESOURCE_MEM |
IORESOURCE_ASSIGNED.
2. In the callback tolm_test, check that the new resource selected has
a non-zero size.
This change is being made so that the resource allocator does not have
to set the IORESOURCE_ASSIGNED flag for marking a resource as
invalid.
Change-Id: I796784dd93aa165e20a672c985b4875991901c87
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41524
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Select UDK_2017_BINDING instead of UDK_2015_BIDING. Otherwise
there is build error when turning on FSP debugging.
Remove duplicate configs from SKX-SP and CPX-SP directories, to
keep the configs at SoC family level.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I6b25bf25dcb57937e2d9fec54eeb7951b0ee4b2b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41573
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
In Tiger Lake we have support for enabling MIPI clocks at runtime in
ACPI. Hence remove setting pch_islclk from devcietree and chip.h.
Also update functions which reference pch_isclk.
BUG=b:148884060
Branch=None
Test=build and boot volteer and verify camera functionality
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I6b3399172c43b4afa4267873ddd8ccf8d417ca16
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41570
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It's already disabled by FSP default but disable VMD by devicetree
to remove dependency with FSP default setting.
BUG=None
Branch=None
Test=Build TGLRVP and boot up and check FSP log for checking VMD is
disabled.
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ief81fe481b94abed9754881cf1f454999fafa52e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41061
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update processor power limit configuration parameters based on
common code base support for Intel Apollo Lake SoC based platforms.
BRANCH=None
BUG=None
TEST=Built and tested on octopus system
Change-Id: I609744d165a53c8f91e42a67da1b972de00076a5
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41233
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This adds FSP UPD D3HotEnable and D3ColdEnable for configuration.
D3Hot low power mode support is for TCSS xhci, xdci, TBT PCIe root
ports and DMA controllers. D3Cold is lower mode for TBT PCIe root
ports and DMA controllers with D3Hot->D3Cold transition.
BUG=🅱️146624360
TEST=Built and booted on Volteer.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I6782cde6a1bfe13f46e75db8c85537c6d62f5d41
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
When drawing two adjacent boxes with draw_box(), there will be a gap
between them. This is due to the truncation in integer division when
calculating the bottom right coordinate of the box.
In this patch, the relative bottom right coordinate is calculated before
transforming to an absolute one. The same issue is also fixed for
draw_rounded_box().
Also check validity of 'pos_rel' and 'dim_rel' arguments for
draw_rounded_box().
BRANCH=none
BUG=chromium:1082593
TEST=emerge-nami libpayload
Change-Id: I073cf8ec6eb3952a0dcb417b4c3c3c7047567837
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41392
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Update processor power limit configuration parameters based on
common code base support for Intel Cannonlake SoC based platforms.
BRANCH=None
BUG=None
TEST=Built and tested on drallion system
Change-Id: Iac6e6f81343fcd769619e9d7ac339430966834f6
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41235
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
CPU to PCH method refers to PCH ACPI operation region which was wrongly
defined as SystemMemory and PCH_PWRM_BASE_ADDRESS. Change the operation
region to be SystemIO and ACPI_BASE_ADDRESS.
BUG=b:156530805
TEST=Built and booted to kernel.
Signed-off-by: John zhao <john.zhao@intel.com>
Change-Id: Ifa291a993ec23e1e4dfad8f6cdfabc80b824d20c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41537
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Intel introduced the UPD VrPowerDeliveryDesign with Cannon Lake. The
BIOS needs to program VrPowerDeliverDesign configuration per platform
according to the platform capabilities to avoid incorrect
electrial/power parameters. This is only added for Cannon Lake.
Refer to document 599797 for more details.
Change-Id: I89b8dceb40fa6a9dc67b218e91bf728ff928b5a0
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41081
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On AGESA f14/f15tn, various RAM-related options were defined in an enum.
However, the preprocessor mess can't compare enum values. To make AGESA
build, each board redefined them as macros, shadowing the enum elements.
Clean this up by replacing the enums with macros in AGESA headers, and
delete the now-redundant redefinitions from all the mainboards.
Note that AGESA f16kb already uses macros, but each mainboard still had
commented-out definitions. Remove them as well, as they are unnecessary.
TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb
mainboards result in identical coreboot binaries.
Change-Id: Ie1085539013d3ae0363b1596fa48555300e45172
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41666
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
All AGESA f16kb boards use the same MTRR values. Factor them out,
while still allowing a board to override them via BLDCFG.
TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb
mainboards result in identical coreboot binaries.
Change-Id: I236e9d45505e92027acc3ba5ff496f5e2f09b9f3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
All AGESA f15tn boards use the same MTRR values. Factor them out,
while still allowing a board to override them via BLDCFG.
TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb
mainboards result in identical coreboot binaries.
Change-Id: I90c95493de1bb5b8f32c06b9575fef3aa7aca031
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41664
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
We set BLDCFG_PCI_MMIO_BASE and BLDCFG_PCI_MMIO_SIZE to the same values
everywhere, so we might as well factor them out. As we have equivalent
Kconfig options in coreboot, also deprecate overriding them via BLDCFG.
TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb
mainboards result in identical coreboot binaries.
Change-Id: I7244c39d2c2aa02a3a9092ddae98e4ac9da89107
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41595
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
All AGESA f14 boards use the same MTRR values. Factor them out, while
still allowing a board to override them via BLDCFG.
TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb
mainboards result in identical coreboot binaries.
Change-Id: Id980e4671e51fe800188f0a84768a307c8965886
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
We use the same AGESA version numbers on all but one mainboard, so we
might as well factor them out. The only exception is asrock/e350m1,
which has the f15tn/f16kb version number even though it actually uses
AGESA f14. To preserve reproducibility, do not change it in this commit.
TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb
mainboards result in identical coreboot binaries.
Change-Id: I0dad2352ccda454d5545f17228d52e4ff4f23f20
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41591
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We use the same value everywhere, so factor it out. Note that the field
where this value ends up in was doubled in size for AGESA fam16kb, but
we did not update the definition to fill in the additional space. We are
not changing it in this commit so as to preserve binary reproducibility.
In any case, add a FIXME explaining why this value may not be correct.
TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb
mainboards result in identical coreboot binaries.
Change-Id: Ied118d534ee1e9728db843944d1e042760b4f32c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41590
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Current Interrupt setting use 2nd parameters as device function number.
Correct as interrupt pin number according to _PRT package format.
{Address, pin, Source, Source index}
Reference:
- ACPI spec 6.2.13 _PRT
BUG=None
BRANCH=None
TEST=Build and boot JSLRVP Verify Interrupt mappings are same as PCI
INTR(0x3C) register and no interrupt storm is seen
Change-Id: I21462c6befea310a49eecf9ad1b5c8770eccd5bd
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41404
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Convert the remaining files in src/drivers to use SPDX identifiers.
int15.h and default_brightness_levels.asl did not have license headers,
but they were both copied from other GPL2 files, so they should be under
the GPL2 as well.
ne2k.c and drm_dp_helper.h are licensed under custom BSD-like licenses
that do not have an SPDX equivalent, so they are added as exceptions
to the license header lint.
Change-Id: I87fb1c637b8d11b0463f7c19f70b847413e14aed
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41601
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
With this patch, the ThinkLight on the ThinkPad T400 can be controlled
through the OS. The same change was done for the ThinkPad X200 in
b45912f4: mb/lenovo/x200: Add support for ThinkLight
After applying this patch, the light can be controlled like this:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
Or through sysfs at /sys/class/leds/tpacpi::thinklight
Unfortunately I do not own a T400 to test this.
Change-Id: I377854d6f54c5459e44626a7d7b61c513268183e
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40713
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
With this patch, the ThinkLight on the ThinkPad T430S can be controlled
through the OS. The same change was done for the ThinkPad X200 in
b45912f4: mb/lenovo/x200: Add support for ThinkLight
After applying this patch, the light can be controlled like this:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
Or through sysfs at /sys/class/leds/tpacpi::thinklight
Unfortunately I do not own a T430S to test this.
Change-Id: Ifa74f5373a6305d1237e7de6da35028e68f1e99c
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
With this patch, the ThinkLight on the ThinkPad T420S can be controlled
through the OS. The same change was done for the ThinkPad X200 in
b45912f4: mb/lenovo/x200: Add support for ThinkLight
After applying this patch, the light can be controlled like this:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
Or through sysfs at /sys/class/leds/tpacpi::thinklight
Unfortunately I do not own a T420S to test this.
Change-Id: I245acf81b34abccf7bcb04126275ab8b154135d5
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40715
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
With this patch, the ThinkLight on the ThinkPad T520 can be controlled
through the OS. The same change was done for the ThinkPad X200 in
b45912f4: mb/lenovo/x200: Add support for ThinkLight
After applying this patch, the light can be controlled like this:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
Or through sysfs at /sys/class/leds/tpacpi::thinklight
Unfortunately I do not own a T520 to test this.
Change-Id: Iffc5dd2f23ee4896da633c18cbbf22c9e448edf1
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
With this patch, the ThinkLight on the ThinkPad T530 can be controlled
through the OS. The same change was done for the ThinkPad X200 in
b45912f4: mb/lenovo/x200: Add support for ThinkLight
After applying this patch, the light can be controlled like this:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
Or through sysfs at /sys/class/leds/tpacpi::thinklight
Unfortunately I do not own a T530 to test this.
Change-Id: I94d239b65e6e8546a27f751d569681a4e68a4109
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
With this patch, the ThinkLight on the ThinkPad T430 can be controlled
through the OS. The same change was done for the ThinkPad X200 in
b45912f4: mb/lenovo/x200: Add support for ThinkLight
After applying this patch, the light can be controlled like this:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
Or through sysfs at /sys/class/leds/tpacpi::thinklight
Unfortunately I do not own a T430 to test this.
Change-Id: I1fb1a9d3a84ce12ab9e3f22a699afbfd7cd1688f
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40716
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
On PC Engines apu1 there were issues with cold reset. Platform hangs
in boot path after performing reset using CF9h.
CB:10549 (amd/sb800: Make UsbRxMode per-board customizable)
mentions a similar issue, and added a configuration macro for it.
That error is also described in AMD SB800 Family Product Errata,
section 15 USB Resets Asynchronously With Port CF9h Hard Reset.
This workaround simply non-execute USB configuration during boot
and hence no reset via CF9h is done.
TEST=perform multiple cold resets and see if platform boots
Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com>
Change-Id: Ie6cebcfc4b77e121ef44a25fa81377eb5e1f0644
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41627
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With this patch, the ThinkLight on the ThinkPad X220 can be controlled
through the OS. This was initially done for the X201 in f63fbdb6:
mb/lenovo/x201: Add support for ThinkLight.
After applying this patch, the light can be controlled like this:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
Or through sysfs at /sys/class/leds/tpacpi::thinklight
Unfortunately I do not own an X220 to test this.
Change-Id: Icead793694475e2f63353690203790ab7ce7c597
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40668
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With this patch, the ThinkLight on the ThinkPad T420 can be controlled
through the OS. The same change was done for the ThinkPad X200 in
b45912f4: mb/lenovo/x200: Add support for ThinkLight
After applying this patch, the light can be controlled like this:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
Or through sysfs at /sys/class/leds/tpacpi::thinklight
Unfortunately I do not own a T420 to test this.
Change-Id: I4f9a9937a45995b72a9712919316e95bb8f82f45
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40714
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This change adds a target to the top level Makefile that allows
building sconfig and generating static.c/static.h without building
the rest of coreboot.
It also adds $(DEVICETREE_STATIC_C) to the c-deps for each stage so
the files are generated before the build runs.
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I4320288422230d8913dfa7cc7b7512775a1a797b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41439
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable drivers for SoundWire codecs and define the topology in
the devicetree for the volteer variant with the SoundWire daughter
board connected.
+------------------+ +-------------------+
| | | Headphone Codec |
| Intel Tigerlake | +--->| Realtek ALC5682 |
| SoundWire | | | ID 1 |
| Controller | | +-------------------+
| | |
| Link 0 +----+ +-------------------+
| | | Left Speaker Amp |
| Link 1 +----+--->| Maxim MAX98373 |
| | | | ID 3 |
| Link 2 | | +-------------------+
| | |
| Link 3 | | +-------------------+
| | | | Right Speaker Amp |
+------------------+ +--->| Maxim MAX98373 |
| ID 7 |
+-------------------+
This was tested by booting the firmware and dumping the SSDT table
to ensure that all SoundWire ACPI devices are created as expected with
the properties that are defined in coreboot under \_SB.PCI0:
HDAS - Intel Tigerlake HDA PCI device
HDAS.SNDW - Intel Tigerlake SoundWire Controller
HDAS.SNDW.SW01 - Realtek ALC5682 - Headphone Codec
HDAS.SNDW.SW13 - Maxim MAX98373 - Left Speaker Amp
HDAS.SNDW.SW17 - Maxim MAX98373 - Right Speaker Amp
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I7782059807416369e0e1ba0d4d7c79dcab0fcbc5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40894
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Instead of only using the baseboard devicetree add a placeholder
overridetree for volteer and refer to it in Kconfig.
This will allow us to add the volteer specific devices here instead
of at the baseboard level.
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I7788a5473fc2275a9791fb27e0e4018a0efcd0f5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40893
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The ALC5682 headset codec can be connected over SoundWire and be
configured for mainboards to use:
- Data Port 0 and Bulk Register Access is supported
- Data Ports 1-4 are supported as both source and sink
The data port and audio mode properties are filled out as best as
possible with the datasheet as a reference.
The ACPI address for the codec is calculated with the information in
the codec driver combined with the devicetree.cb hierarchy where the
link and unique IDs are extracted from the device path.
For example this device is connected to master link ID 0 and has strap
settings configuring it for unique ID 1:
chip drivers/soundwire/alc5682
register "desc" = ""Headset Codec""
device generic 0.1 on end
end
This driver was tested with the volteer reference design by booting
and disassembling the runtime SSDT to ensure that the devices have the
expected address and properties.
Device (SW01)
{
Name (_ADR, 0x000021025D568200)
Name (_DDN, "Headset Codec")
Name (_DSD, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-sw-interface-revision", 0x00010000 },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "mipi-sdw-port-bra-mode-0", "BRA0" },
Package () { "mipi-sdw-dp-0-subproperties", "DP0" },
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" },
Package () { "mipi-sdw-dp-1-source-subproperties", "SRC1" },
Package () { "mipi-sdw-dp-1-sink-subproperties", "SNK1" },
[...]
}
}
Name (BRA0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {
"mipi-sdw-bra-mode-bus-frequency-configs",
Package () { 0x000F4240, [...] }
},
[...]
}
}
Name (DP0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-bra-flow-controlled", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "mipi-sdw-port-bra-mode-0", "BRA0" }
}
}
Name (MOD0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {
"mipi-sdw-audio-mode-bus-frequency-configs",
Package () { 0x000F4240, [...] }
},
[...]
}
}
Name (SNK1, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-data-port-type", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }
}
}
Name (SNK1, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-data-port-type", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }
}
}
}
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I488dcd81d2e66a6f2c269ab7fa9f7ceaf2cbf003
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40891
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The MAX98373 smart speaker amp can be connected over SoundWire and be
configured for mainboards to use:
- Data Port 0 and Bulk Register Access is not supported
- Data Port 1 is the 32bit data input for the speaker path
- Data Port 3 is the 16bit data output for I/V sense ADC path
The data port and audio mode properties are filled out as best as
possible with the datasheet as a reference.
The ACPI address for the codec is calculated with the information in
the codec driver combined with the devicetree.cb hierarchy where the
link and unique IDs are extracted from the device path.
For example this device is connected to master link ID 1 and has strap
settings configuring it for unique ID 3.
chip drivers/soundwire/max98373
register "desc" = ""Left Speaker Amp""
device generic 1.3 on end
end
This driver was tested with the volteer reference design by booting
and disassembling the runtime SSDT to ensure that the devices have the
expected address and properties.
Device (SW13)
{
Name (_ADR, 0x000123019F837300)
Name (_DDN, "Left Speaker Amp")
Method (_STA)
{
Return (0x0F)
}
Name (_DSD, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-sw-interface-revision", 0x00010000 },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" },
Package () { "mipi-sdw-dp-1-sink-subproperties", "SNK1" },
Package () { "mipi-sdw-dp-3-source-subproperties", "SRC3" },
}
}
Name (MOD0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {
"mipi-sdw-audio-mode-bus-frequency-configs",
Package () { 0x00753000, [...] }
},
[...]
}
}
Name (SNK1, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-data-port-type", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }
}
}
Name (SRC3, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-data-port-type", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }
}
}
}
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I3f8cb2779ddde98c5df739bd8a1e83a12a305c00
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40890
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The Intel Tigerlake SoundWire controller has 4 master links which
are configured differently depending on the external crystal oscillator
which is connected to the PCH.
This function will read the PCH PMC EPOC register to determine the
frequency and then fill out the master link entries with the correct
table values.
The frequency is also provided directly in a custom "ip-clock" property
which will be added to the link descriptor and passed to the OS driver
so it can know the clock rate of the master.
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I98b7df21210c29cd8defeff648f2c2207d629295
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40889
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This driver provides support for Intel SoundWire controllers. It is
intended to be used by multiple Intel SoCs and relies on retrieving
controller/master information from the SoC itself. As such it
provides a function that must be implemented by the SoC to fill out
this structure.
The Intel SoundWire driver in the Linux kernel expects firmware to
inform it which master links are unused by adding a custom property
to the link descriptor. This is done by looking for any children
attached to the device that use each link and disabling the ones
that are unused.
Mainboards will enable this driver and define the controller in
devicetree.cb in order provide the required ACPI tables, but the
mainboard should not need to provide any configuration itself as that
should all come from the SoC directly.
This was tested with the volteer board by adding this controller and a
codec to devicetree.cb and ensuring that the properties are all present,
including the custom properties for the device clock and quirk mask for
disabled links.
Device (SNDW)
{
Name (_ADR, 0x40000003)
Name (_CID, Package () { "PRP0001", "PNP0A05" })
Name (_DDN, "Intel SoundWire Controller")
Name (_DSD, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-sw-interface-revision", 0x00010000 },
Package () { "mipi-sdw-master-count", 0x04 }
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "mipi-sdw-link-0-subproperties", "LNK0" },
Package () { "mipi-sdw-link-1-subproperties", "LNK1" },
Package () { "mipi-sdw-link-2-subproperties", "LNK2" },
Package () { "mipi-sdw-link-3-subproperties", "LNK3" },
}
}
Name (LNK0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-clock-stop-mode0-supported", One },
[...]
Package () { "intel-sdw-ip-clock", 0x0249F000 },
Package () { "intel-quirk-mask", Zero },
}
}
[...]
}
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I4b4f843a7e5ea170b070a1697c8eedc7c103e127
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40888
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The PMC EPOC register indicates which external crystal oscillator is
connected to the PCH. This frequency is important for determining the
IP clock of internal PCH devices.
Add definitions that allow this register to be read and extract the
crystal frequency, and a helper function to extract and return this
as the defined enum.
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I959fe507f3dbf93b6176b333a9e725ed09f56328
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40887
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The DRAM Max Cycle Time (tCKmax) for Samsung's K4UBE3D4AA-MGCL DRAM
part should be set to 0xF.
BUG=b:157178553, b:156555863
TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot a
SKU4 volteer to the kernel and run "memtester 6G 100" and verify it
completes successfully without error and does not crash.
Change-Id: Id95b19fe261e3f57a52a43055acab99af66b14ab
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41634
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The SPD_LPDDR4X_200b_8bank_1Rx16_16Gb_DDP_4267.spd.hex SPD
contained an incorrect SDRAM Max Cycle Time (0 instead of 0x0f).
After fixing that error, I noticed that two generic SPDs could
be collapsed into one, so I removed one of the duplicate generic
SPDs (SPD_LPDDR4X_200b_8bank_1Rx16_16Gb_16Row_DDP_4267.spd.hex),
and changed Makefile to collapse volteer's DRAM ID 2 into ID 0.
BUG=b:156126658, b:156058720
TEST=Flash and boot a ripto to kernel. Also verified that ripto
can boot successfully to the kernel at 4267 MT/sec with FSP built
in debug mode with RMT enabled.
Change-Id: Ib52bf674ebf91854d3d078015aa640aa7ee98a6f
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41345
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This node is required so we can add child ACPI nodes.
BUG=b:147042464
TEST=Boot trembyle and confirm Bus A has a firmware node
$ cat /sys/bus/pci/devices/0000\:00\:08.1/firmware_node/path
\_SB_.PCI0.PBRA
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I18144a69ed28a913bc9a2523d69edf84a1402e7e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Instead of directly writing values to the IOSAV registers, use a struct
and some helper functions to provide a cleaner interface for the IOSAV.
Having IOSAV_SUBSEQUENCE refer to a static function is weird, but we
will remove this macro in a follow-up that does not change the binary.
Tested on Asus P8Z77-V LX2, still boots.
Change-Id: I73f13c18a739c5586a7415966f9017c2335fdfd1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40980
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
We set bit 15 of IOSAV_n_SUBSEQ_CTRL three times, but it is reserved.
Since this bitfield is five bits wide, manually truncate the values so
that bit 15 does not get set.
Tested on Asus P8Z77-V LX2, still boots.
Change-Id: Ib61b026b016b0d22e164f8817158ec5093f6bb9e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40981
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Turn `iosav_run_queue` and `iosav_run_once` into functions. Inlining
them does not have any effect, as the resulting binary is identical.
Tested on Asus P8Z77-V LX2, still boots.
Change-Id: I7844814eeedad9b1d24f833a77c90902fa926bfe
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40983
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Turn it into a macro that looks like a function, and add another, more
generic `iosav_run_queue` that covers all current use-cases. They will
be replaced with functions in a follow-up to preserve reproducibility.
Tested with BUILD_TIMELESS=1, ASUS P8Z77-V LX2 remains unchanged.
Change-Id: I07b260b5fb111c1408ff75316dc0735a9e642ac9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40982
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
To replace the register writes with assignments to struct fields, we
would need to have the values as parameters of a single macro. So,
split the raw value of `IOSAV_n_SP_CMD_CTRL_ch` in two parts. Note that
the single command that sets bit 17 is likely wrong, but it will be
fixed after refactoring. For now, we'll treat it as part of `ranksel`.
Move the parameters of `ADDR_UPDATE` into the top-level IOSAV macro.
Hopefully, this will be enough to replace the underlying implementation.
Line length limits are not for review. Breaking the lines unnecessarily
complicates search and replace operations, and wil be taken care of in
subsequent commits.
Tested with BUILD_TIMELESS=1, ASUS P8Z77-V LX2 remains unchanged.
Change-Id: I404edbd5d90ddc2a6993f39f552480d1ef24e153
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40978
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
New information indicates the PSP expects the APOB NV region
populated for all types of boot, and this is not a feature only
used for S3. Switch over to using the MRC_CACHE flash region.
Remove the Kconfig symbols for the APOB_NV base and size. Override
the MRC_CACHE_SETTINGS_CACHE_SIZE to ensure the default maintains the
minimum required size. Use the generated (or mainboard-specified)
fmap.fmd file as an input for amdfwtool and properly match the
flash region.
Change the original naming for the APOB destination, which matched the
PSP spec's field name, to PSP_APOB_DESTINATION. This should be more
intuitive for a source code reader. The APOB address is the location
in DRAM where the PSP puts its output block.
BUG=b:147042464, b:153675914
TEST=Boot trembyle
Original-Change-Id: Ia5ba8646deec2bd282df930f471738723063eef8
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2080375
Original-Change-Id: I972d66f1817f86ff0b689f011c0c44c3fe7c8ef7
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2053312
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I4550766ece462b65a6bfe6f1b747343e08e53fe5
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38703
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The audio devices are currently set to enable static devices at their
own level, but in order to supported nested SoundWire devices these
drivers must instead use scan_static_bus. Without this change the
device tree code will not look at children of these devices.
After this change the audio device can have nested devices:
device pci 1f.3 on
chip drivers/intel/soundwire
device generic 0 on end
end
end
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: Ibb716fbd9ffdc45f2c4bbe5e81f420ec2b13483c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This change adds a help function to write a SoundWire ACPI address
object that conforms to the SoundWire DisCo Specification Version 1.0
The SoundWire address structure is defined in include/device/soundwire.h
and provides the properties that are used to form the _ADR object.
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I6efbf52ce20b53f96d69efe2bf004b98dbe06552
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40885
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change uses the previously added SoundWire definitions to provide
functions that generate ACPI Device Properties for SoundWire
controllers and codecs.
A SoundWire controller driver should populate
`struct soundwire_controller` and pass it to
soundwire_gen_controller(). This will add all of the defined master
links provided by the controller.
A SoundWire codec driver should populate the necessary members in
struct soundwire_codec and pass it to soundwire_gen_codec().
Several properties are optional and depend on whether the codec itself
supports certain features and behaviors.
The goal of this interface is to handle all of the properties defined
in the SoundWire Discovery and Configuration Specification Version
1.0 so that controller and codec drivers do not need to all have code
for writing standard properties.
Both of these functions also provide a callback method for adding
custom properties that are not defined by the SoundWire DisCo
Specification. These properties may be required by OS drivers but are
outside of the scope of the SoundWire specification itself.
This code is tested with controller, codec, and mainboard
implementations in subsequent commits.
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: Ib185eaacf3c4914087497ed65479a772c155502b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
I'm not quite sure what happened when we first added the code for
Trogdor strappings but something clearly seems to be wrong. First of
all, on newer schematics the RAM_ID_1 pin is actually pin 19, not pin
91. It only used to be 91 on rev0. Whether that was an intentional
change or someone just swapped the digits on accident at some point,
we're not quite sure anymore, but it seems to be 19 going forward so
that is what we should be programming. (ram_code wasn't used for
anything on Trogdor rev0 so we don't care about adding
backwards-compatibility for that.)
The sku_id pins are also somewhat out of whack: first of all, a new
SKU_ID_2 pin was added for rev1 that wasn't there on rev0. Second,
SKU_ID_0 is not GPIO_114. In fact, it has never been GPIO_114. I have no
idea how that number got there. Anyway, fix it. (Like with the ram_code,
SKU IDs were also not used for rev0 so we won't make this
backwards-compatible.)
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ia14ec74ec2f16ce2661f89d0d597a5477297ab69
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41545
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philip Chen <philipchen@google.com>
A handful of boards do not properly implement the presence straps,
leading libgfxinit to fail to detect an attached display. Add an
override, defaulting to N, which can be set for affected boards.
Add a section to the documentation detailing the option and its usage.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Change-Id: I43c61d67147878887658b23d90fb1c0b91e7a2af
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The devicetree declares the chrontel interrupt as GpioInt so the GPIO
needs to be configured as such instead of routing directly to APIC.
Also update the compatible string to conform to kernel standards.
BUG=b:146576073
TEST=install ch7322 driver; send commands using cec-ctl and verify
that the interrupt handler is called.
Change-Id: I737d951db135c53deb0f3cb956f0d0f275082251
Signed-off-by: Jeff Chase <jnchase@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41185
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The CA vref should alway select range[1]. But in fast calibration flow,
we missed the range selection and caused the CA vref to use the range[0] value.
The DQ vref should select correct range that corresponds to current frequency,
that is for 1600Mbps, 2400Mbps to select range[1], for 3200Mbps and 3600Mbps
to select range[0].
Refer to the 'JESD209-4 - Low Power Double Data Rate 4X(LPDDR4X).pdf',
used MR12 to set Vref(CA) levels, used MR14 to set VREF(DQ) levels.
MR12 range[0] values from 15.0% to 44.9%, range[1] values from 32.9% to 62.9%,
MR14 range[0] and range[1] values same as MR12.
BUG=b:153614919
BRANCH=kukui
TEST=Boots correctly on Kukui
Change-Id: Ie7680b1bf0c29c946d18e3b27626ce6f31c4216b
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40525
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
pmc.c was included in the SMM object, but only needed the one function,
pmc_soc_set_afterg3_en. pmutil.c was already doing power management-
related functionality, and was included in SMM, so moving
pmc_soc_set_afterg3_en to pmutil.c allows pmc.c to be removed from the
SMM build.
Change-Id: I87f65fd10d35f1f75516e804501d5319b81a0383
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41407
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Historically in coreboot, the PMC's fixed PCI resources were described
by the System Agent (the MMIO resource), and eSPI/LPC (the I/O
resource). This patch moves both of those to a new Intel SoC-specific
function, soc_pmc_read_resources(). On TGL, this new function takes care
of providing the MMIO and I/O resources for the PMC.
BUG=b:156388055
TEST=verified on volteer that the resource allocator is aware of and
does not touch these two resources:
("PCI: 00:1f.2 resource base fe000000 size 10000 align 0 gran 0 limit 0
flags f0000200 index 0
PCI: 00:1f.2 resource base 1800 size 100 align 0 gran 0 limit 18ff
flags c0000100 index 1")
Also verify that the MEM resource is described in the coreboot table:
("BIOS-e820: [mem 0x00000000fe000000-0x00000000fe00ffff] reserved")
Verified the memory range is also untouchable from Linux:
("system 00:00: [mem 0xfe000000-0xffffffff] could not be reserved")
Change-Id: Ia7c6ae849aefaf549fb682416a87320907fb3fe3
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41385
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On some SoCs, there are PCI devices that may get hidden from PCI
enumeration by platform firmware. Because the Vendor ID reads back as
0xffffffff, it appears that there is no PCI device located at that BDF.
However, because the device does exist, designers may wish to hang its
PCI resources off of a real __pci_driver, as well as have it participate
in ACPI table generation.
This patch extends the semantics of the 'hidden' keyword in
devicetree.cb. If a device now uses 'hidden' instead of 'on', then it
will be assumed during PCI enumeration that the device indeed does
exist, and it will not be removed as a "leftover device." This allows
child devices to be enumerated correctly and also PCI resources can be
designated from the {read,set}_resources callbacks.
It should be noted that as of this commit, there are precisely 0 devices
using 'hidden' in their devicetree.cb files, so this should be a safe
thing to do.
Later patches will begin moving PCI resources from random places (typically
hung off of fixed SA and LPC) into the PMC device (procedure will vary per-
platform).
Change-Id: I16c2d3e1d1433343e63dfc16856cff69cd815e2a
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41384
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Link frequency and a format was not correct for volteer proto 2
ov2740 user-facing camera.
The link frequency is calculated in the following way.
(max frame width * max frame height * max fps * data format in bps
/ number of lanes / data rate) + max 35% of overhead
For ov2740, (1920 * 1080 * 60 * 10 / 2 / 2) = 311Mhz.
360Mhz after adding 18% of overhead.
BUG=b:148428976
BRANCH=none
TEST=Build and boot volteer proto 2 board. Start a camera app
and check user-facing camera functionalities.
Signed-off-by: Daniel Kang <daniel.h.kang@intel.com>
Change-Id: I3b51826e123dec394c1b4eb9a1c5b64b8b11459e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41157
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Dossym Nurmukhanov <dossym@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove unused processor power limit configuration parameter
and function call based on common code base support for
Intel Icelake SoC based platform.
BRANCH=None
BUG=None
TEST=Built for icelake based dragonegg board.
Change-Id: Id8923f2c176092b6f7acfbfb079587f88258dce8
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41236
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On Volteer port 0 (MB PORT) does not have a retimer so the port needs
to be configured for the SOC to handle Aux orientation flipping. This
requires 2 changes setting the TcssAuxOri UPD to 1 for port 0 (Bit 0)
and configuring AUXP and AUXN GPIOs to Native Function 6 so SOC can
control the orientation
BUG=b:145220205
BRANCH=NONE
TEST=booted Volteer proto 2 and verified that the AUX channels flip
when the cable is flipped
Change-Id: Ic81adc24d10322cc305bf0fa4c38514468ea0942
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40245
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
In order for the SOC to be able to control the Aux line orientation for
Type-C ports that do not have a retimer, the IomTypeCPortPadCfg UPD needs
to be configurable through devicetree to correctly set the GPIO pins that
the SOC should use to flip orientation.
BUG=b:145220205
BRANCH=NONE
TEST=booted Volteer proto 2 and verified that the AUX channels flip
when the cable is flipped
Change-Id: I2e48adb624c7922170eafb8dfcaed680f008936e
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40244
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add tcss.asl to support TCSS power management.
For the detail please refer cb:39785.
BUG=none
TEST=Check TBT PCIe root ports: 00:07.0/00:07.1/00:07.2/00:07.3
/sys/bus/pci/devices/bus:device:func/power suspend and
active time can increase.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I432f3d6643de13b08c07e47f799c0ecdfe047de6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41506
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add method acpi method GPID to return the GPIO PCR port ID.
This method is further planned to be used for GPIO power
management configuration.
TEST=Build waddledoo board
Change-Id: Ic45b40bbe39e303cddcc82e0e848786b7311ab64
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41501
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
The resource allocator woes post-4.12 release showed room for
improvement on both discussion and documentation. To encourage this
(and encourage reviewers to look out for issues in that space),
extend the review guidelines so that they encourage to more clearly
document the reason for a change with the change (commit message or
our documentation) and also to loop in the mailing list.
Change-Id: I1962dba3fe7e1a01fa4c8b0058297c7d050cb7b7
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41493
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Originally variants make use of a 32MB chip whereas now they
use a 16MB SPI flash. Allow for the coordination of dealing
with the transition between phases.
V.2: Leave Puff alone at the moment due to the complexity of
coordination.
BUG=b:153682192
BRANCH=none
TEST=none
Change-Id: Ic336168ea1a0055c30f718f5540209d2cf69d029
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40897
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Lower 20bits of TOLUD and TOLM registers include 19 reserved bits and
1 lock bit. If lock bit is set, then systemagent.asl would end up
reporting the base address of low MMIO incorrectly i.e. off by 1.
This change masks the lower 20 bits of TOLUD and TOM registers when
exposing it in the ACPI tables to ensure that the base address of low
MMIO region is reported correctly.
Change-Id: I11b3ef8deda21930998471ab6e712da4c62f5b02
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41471
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This change updates systemagent.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for auron.
Change-Id: I479bb6cb7ed4c9265325c7c8621f03454f21f467
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41481
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Lower 20bits of TOLUD and TOLM registers include 19 reserved bits and
1 lock bit. If lock bit is set, then systemagent.asl would end up
reporting the base address of low MMIO incorrectly i.e. off by 1.
This change masks the lower 20 bits of TOLUD and TOM registers when
exposing it in the ACPI tables to ensure that the base address of low
MMIO region is reported correctly.
Change-Id: I2ff7a30fabb7f77d13acadec1e6e4cb3a45b6139
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41470
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This change updates systemagent.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for soraka.
Change-Id: If8d8dd50af9a79d30f54e98f7f2fe7ce49188763
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41480
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
CB:41454 updated northbridge.asl to ASL2.0 syntax. During this, GPCL
was incorrectly updated to use << (ShiftLeft) instead of >>
(ShiftRight). This change fixes the error in GPCL by updating it to
use >> (ShiftRight).
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for hatch.
Change-Id: I36469cb3b0bcc595acf0e43808d6a574986cad68
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41519
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The PCI interrupt devices were only partially implemented.
* Lacked support for _DIS to disable the bus. Something the kernel does
while booting.
* Lacked support for APIC vs PIC. This means the devices can only be
used when using the PIC. By looking at the PMOD variable we can handle
both PIC and APIC. This means we can stop hard coding the PCI interrupt
numbers in the ACPI tables.
* I removed INT[E-H] since they are not used.
BUG=b:139429446, b:147042464
BRANCH=none
TEST=Boot with both the APIC and PIC and saw that the link devices work
as expected:
PIC MODE:
[ 1.959345] ACPI: PCI Interrupt Link [IRQA] (IRQs 1 3 4 5 *6 7 8 9 10 11 12 14 15)
[ 2.007344] ACPI: PCI Interrupt Link [IRQB] (IRQs 1 3 4 5 *6 7 8 9 10 11 12 14 15)
[ 2.056344] ACPI: PCI Interrupt Link [IRQC] (IRQs 1 3 4 5 6 7 8 9 10 11 12 *14 15)
[ 2.104344] ACPI: PCI Interrupt Link [IRQD] (IRQs 1 3 4 5 6 7 8 9 10 11 12 14 *15)
[ 13.752676] PCI Interrupt Link [IRQA] enabled at IRQ 6
[ 13.816755] PCI Interrupt Link [IRQD] enabled at IRQ 15
[ 27.788798] PCI Interrupt Link [IRQB] enabled at IRQ 6
[ 27.852873] PCI Interrupt Link [IRQC] enabled at IRQ 14
APIC MODE:
[ 19.311764] ACPI: PCI Interrupt Link [IRQA] (IRQs *16 17 18 19 20 21 22 23)
[ 19.374765] ACPI: PCI Interrupt Link [IRQB] (IRQs 16 *17 18 19 20 21 22 23)
[ 19.438770] ACPI: PCI Interrupt Link [IRQC] (IRQs 16 17 *18 19 20 21 22 23)
[ 19.501764] ACPI: PCI Interrupt Link [IRQD] (IRQs 16 17 18 *19 20 21 22 23)
[ 34.719072] PCI Interrupt Link [IRQA] enabled at IRQ 23
[ 34.798994] PCI Interrupt Link [IRQD] enabled at IRQ 22
[ 66.469510] PCI Interrupt Link [IRQB] enabled at IRQ 21
[ 66.542395] PCI Interrupt Link [IRQC] enabled at IRQ 20
Change-Id: I1bb84813b65c89b4b5479602be3e9a9fedb7333d
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2095683
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This header implements structures to describe the properties defined in
the SoundWire Discovery and Configuration Specification Version 1.0.
By itself this just provides the property definitions, it is then used
by the code that generates ACPI device properties and by the controller
and codec drivers.
A new header for MIPI vendor/device IDs is also added, with the MIPI
Alliance board members added by default. This will be used in the same
way as pci_ids.h to track devices added to coreboot.
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: Ie9901d26d1efe68edad7c049c98a976c4e4f06f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The common PnP serial port DSDT code is intentionally included twice for
two serial ports with different LDNs. Undefine LDN and the PM register
name before redefining for second serial port so iasl doesn't complain.
Change-Id: I031905479c66698fb01da028e3f37d923396d2d9
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41095
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The current implementation uses strcmp() without splitting the list
and therefore returns false even when the string pointed to by
'name' is a part of 'whitelist'. The patch fixes this problem.
Also, update help text of CONFIG_TPM_MEASURED_BOOT_RUNTIME_DATA to
space delimited list to align it with the other lists we use.
Change-Id: Ifd285162ea6e562a5bb18325a1b767ac2e4276f3
Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41280
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
The IOSAV register descriptions are plagued with errors and nonsense.
Using `git blame` to find the culprit... Zoinks! Turns out it was me!
Rewrite the comment so that the difference between a sub-sequence and a
command is clear. Also, expand the descriptions that could be ambiguous
and fix some insane blunders. CKE and ODT fields are per DIMM and rank!
As per review comments, also invert the order of bitfield value ranges.
Change-Id: Ie384304c565f962fe58baa231c15109eb3d284aa
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40952
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This patch adds a basic test for the common region and region_device
APIs, sanity checking the basic functions and things like
overflow-handling. There is certainly more that could be added here, but
it's a start.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I4932402f54768557e5b22b16e66220bd90ddebfd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41046
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Jan Dabros
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
<cmocka.h> requires a few standard headers to be explicitly included
before itself or it will throw compilation errors. Having to always
include these headers in the right order in every test is cumbersome.
Instead, this patch encapsulates the problem in a new <tests/test.h>
header that all tests should include (instead of <cmocka.h> directly).
Also fix --gc-sections in the test framework which needs to be passed
for linking, not for compiling.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I4284d74c8673708e21a5266eb42f7b9ae19a1b12
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41045
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Dabros
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Fix unterminated array.
When looking for a type not specified in filetypes (cbfs.h:204), the
loop in lookup_name_by_type (cbfs_image.c:60) will run into a buffer
over-read.
Found-by: AFL++ 2.64d rev 1317433
Signed-off-by: Philipp Bartsch <phil@grmr.de>
Change-Id: Ib82bb92e82b09fa1e26b9ca34529ec7b98e8f7b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41421
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
No code that was or will be upstreamed uses functionality from soc_util
in romstage, so only compile and link it for ramstage.
This also allows to fix the SoC type detection in a follow-up patch
using information that FPS-M will be providing in a HOB.
BUG=b:153779573
Change-Id: If96e53608eadd562f6de5a0c370b89e84e43d049
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41430
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The struct (formerly assigned to default_pci_ops_bus.ops_pci) only
contained a NULL (well, 0) pointer for the set_subsystem callback, but
usage of that callback is guarded with NULL checks when it is used,
therefore it can be removed.
TEST=still compiles
Change-Id: I3943c8ae73b95e744a317264d7ceb8929cb28341
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41432
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update processor power limit configuration parameters based on
common code base support for Intel Broadwell SoC based platforms.
BRANCH=None
BUG=None
TEST=Build for broadwell based platform
Change-Id: I97e38a533e74a122b6809e20a10f6e425827ab9c
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41234
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Don't directly include <soc/gpio.h>. All code using GPIO features
should always and only include <gpio.h>, which should indirectly
include the SoC-specific <soc/gpio.h>.
Change-Id: I78f1e250570f1b395c61115d4a872b24b3d58f69
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Don't directly include <soc/gpio.h>. All code using GPIO features
should always and only include <gpio.h>, which should indirectly
include the SoC-specific <soc/gpio.h>.
Change-Id: Id2663398b9f069ab1f60d63016ea7aa080f66d20
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41321
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Add function to display ME Host Firmware Status registers. Make use of
print_me_fw_version() from CSE lib to print ME firmware version information.
Add manufacturing mode field in HFSTS1 register for JSL in place of,
spi_protection_mode in TGL.
BUG=None
BRANCH=None
TEST=Build and boot jslrvp. In coreboot logs, ME info can be seen.
ME: Version: 13.5.0.7049
ME: HFSTS1 : 0x90006255
ME: HFSTS2 : 0x82100136
ME: HFSTS3 : 0x00000020
ME: HFSTS4 : 0x00004800
ME: HFSTS5 : 0x00000000
ME: HFSTS6 : 0x00400006
ME: Manufacturing Mode : YES
ME: FW Partition Table : OK
ME: Bringup Loader Failure : NO
ME: Firmware Init Complete : YES
ME: Boot Options Present : NO
ME: Update In Progress : NO
ME: D0i3 Support : YES
ME: Low Power State Enabled : NO
ME: CPU Replaced : YES
ME: CPU Replacement Valid : YES
ME: Current Working State : 5
ME: Current Operation State : 1
ME: Current Operation Mode : 0
ME: Error Code : 6
ME: CPU Debug Disabled : YES
ME: TXT Support : NO
Change-Id: Ic6b1c9410db8f06ac24fd997772b2ede04264bee
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40570
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Deltaur uses HDA codec so we need to set iDisplay Audio Codec
disconnection and enable HdaAudioLink, otherwise the HDA codec won't
respond to commands to execute HDA verbs.
BUG=b:156447983
TEST=No timeout error when run "devbeep" in CLI.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I15d2895866abcf68963c9732ed5d05f32096fc92
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41397
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The index of DRAM_STRAPS indicates to a specific DRAM characteristic
instead of a DRAM part number therefore update the existing DRAM SPD
binary to the naming by DRAM characteristic.
BUG=b:152019429
BRANCH=None
TEST=build the image and verify that coreboot log shows the correct SPD
info
Change-Id: I8ffcf156f37a465209740c5e2a34effb5f1f5d5c
Signed-off-by: Marco Chen <marcochen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40906
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reading the SPD using the SMBUS routines takes a long time because each
byte or word is access seperately.
Allow using the i2c read eeprom routines to read the SPD. By doing this
the start address is only sent once per page.
The time required to read a DDR4 SPD is reduced from 200 msec to 50
msec.
BUG=N/A
TEST=tested on facebook monolith
Change-Id: I44e18b8ba72e1b2321f83402a6a055e2be6f940c
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40942
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Update monolith root port settings to match those of the original BIOS.
MaxPayload is set to 256 bytes, ASPM is disabled and LTR and Advanced
Error reporting are enabled.
BUG=N/A
TEST=tested on facebook monolith
Change-Id: Idf6e706d45cf1ea1aee4a75a6d0eb130b21db927
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41172
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
If panel has too small hfp or hbp, hfp_byte or hbp_byte may become
very small value or negative value. When very small value or
negative value is used, the panel will be scrolling or distorted.
This patch adjusts their values so that they are greater than
the minimum value and keep total of them unchanged.
DSI transfer HBP or HFP, There are some extra packet. ex. packet
header(4byte) and eof(2byte) and (next)hs packet header(4 byte).
the hfp_byte = HFP * BPP - packet header(4byte) and eof(2byte)
and (next)hs packet header(4 byte). So the min hfp_byte is 2 when
HFP = 4.
This is equivalent to the Linux kernel DSI change in:
https://chromium-review.googlesource.com/c/chromiumos/third_party/
kernel/+/2186872
BUG=b:144824303
BRANCH=kukui
TEST=boot damu board with panel CMN N120ACA-EA1 (12" panel and its
hbp only 6), the panel can display without scrolling or
distortions.
Signed-off-by: Paul Ma <magf@bitland.corp-partner.google.com>
Change-Id: I608c01d41ae93c8d5094647bbf3e0ae4a23d814c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41163
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
By default ROMSTAGE_ADDR and VERSTAGE_ADDR are set to 0x2000000. This
causes problems in a non-xip environment because when verstage loads
romstage, it overrides it's memory. So pick a different offset for
verstage.
BUG=b:147042464
TEST=Boot verstage on trembyle and see OS boot.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I2464db6f3769bd23d250588b341d1c9e44f10d21
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41367
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
CPU to PCH method refers to PCH ACPI operation region which was wrongly
defined as SystemIO. This causes ACPI AE_LIMIT error from PM _DSW
method. Change the operation region from SystemIO to SystemMemory to
resolve this execution failure.
BUG=b:140290596
TEST=Built and booted to kernel. _DSW method executes successfully without
ACPI AE_LIMIT error.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I3965c3d891f7d3cf4a448edc0c3f7e7749a905a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
NO_RANKSEL was introduced because it appeared less often and it did not
cause any lines to become too long. To simplify macro transmutation, add
the RANKSEL opposite and keep NO_RANKSEL as a no-op to ease replacement.
Line length limits are not for review. Breaking the lines unnecessarily
complicates search and replace operations, and wil be taken care of in
subsequent commits.
Tested with BUILD_TIMELESS=1, ASUS P8Z77-V LX2 remains unchanged.
Change-Id: I5d7aad59fc79840da7de2e9421b84834a6024eb9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40977
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This is a temporary solution to simplify refactoring verification.
Programming a subsequence involves writing a group of four registers.
Abstract this into a "program subsequence" operation. This eliminates
register write noise, which should improve the readability of the code.
To replace the register writes with assignments to struct fields, we
would need to have the values as parameters of a single macro. So,
unroll SUBSEQ_CTRL and SP_CMD_ADDR into parameters of IOSAV_SUBSEQUENCE.
Line length limits are not for review. Breaking the lines unnecessarily
complicates search and replace operations, and wil be taken care of in
subsequent commits.
Tested with BUILD_TIMELESS=1, ASUS P8Z77-V LX2 remains unchanged.
Change-Id: I23f7706ba8a87c1c26f9d40a50b6d47dcf95106a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40971
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
We have a single IOSAV sequence that is broadcast across all channels.
Introduce the BROADCAST_CH macro, so that we can use the per-channel
register definitions. Treating all IOSAV sequence writes the same eases
the refactoring done in subsequent commits. Also, drop the broadcast
register definitions for the IOSAV commands, as they are now obsolete.
Line length limits are not for review. Breaking the lines unnecessarily
complicates search and replace operations, and wil be taken care of in
subsequent commits.
Tested with BUILD_TIMELESS=1, ASUS P8Z77-V LX2 remains unchanged.
Change-Id: I2dbb100fcad68d128e92b1bc9321fc1e53b748c9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40976
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With conversion to variant structure complete, remove temporary guards
inserted to help validate the move.
With this change, all P2B family boards (currently p2b and p2b-ls)
share the same S-state declarations.
TEST=No apparent ACPI regression observed on p2b-ls.
Change-Id: Ibd6e49adeae2a42800ee5bfd74b3850eb19843a5
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41051
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Lower 20bits of TOLUD register include 19 reserved bits and 1 lock
bit. If lock bit is set, then northbridge.asl was reporting the base
address of low MMIO incorrectly i.e. off by 1. This resulted in Linux
kernel complaining that the MMIO window allocated to the device at the
base of low MMIO is incorrect:
pci 0000:00:1c.0: can't claim BAR 8 [mem 0x7fc00000-0x7fcfffff]: no compatible brw
pci 0000:00:1c.0: [mem 0x7fc00000-0x7fcfffff] clipped to [mem 0x7fc00001-0x7fcfff]
pci 0000:00:1c.0: bridge window [mem 0x7fc00001-0x7fcfffff]
This change masks the lower 20 bits of TOLUD register when exposing it
in the ACPI tables to ensure that the base address of low MMIO region
is reported correctly.
TEST=Verified that kernel dmesg no longer complains about the BAR at
base of low MMIO.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I4849367d5fa03d70c50dc97c7e84454a65d1887a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41455
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Based on the autoport. The OptiPlex 9010 comes in four different sizes:
MT, DT, SFF and USFF. Tested on SFF only. The other PCBs are slightly
different, but they are designed with intercompatibility in mind. With
small devicetree overrides it should work on OptiPlex 7010 and other
OptiPlex 9010 variants as well.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I88d65cae30d08ca727d86d930707c2be25a527cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40351
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The SMSC SCH5545 is very similar to the publicly available
datasheet for the SCH5627.
TEST=use PS2 keyboard and mouse, serial port, runtime registers and
Embedded Memory Interface on Dell Optiplex 9010
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: If8a60d5802675f09b08014ed583d2d8afa29fc04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40350
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Correct comment on HMRFPO_ENABLE flow for CSE Lite SKU. In order to place
CSE into SECOVER_MEI_MSG mode, below procedure has to be followed.
1. Ensure CSE boots from RO(BP1).
- Set CSE's next boot partition to RO
- Issue GLOBAL_RESET HECI command to reset the system
2. Send HMRFPO_ENABLE command to CSE. Further, no reset is required.
TEST=Verified on hatch
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I213e02ba3898194fa6c8fe38fab34b5c19f25aa1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41340
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Based on Fibocom HW user manual RESET should be deasserted at least 20ms after the power on pin.
The design for the reset pin is open drain connected to a pull up, so it is set to high-Z (configured as GPIO in) after 20ms.
BUG=b:152013143
BRANCH=none
TEST=traced the signals using a scope to verify timing is met.
Signed-off-by: Alex Levin <levinale@chromium.org>
Change-Id: I7c947d1bc4cce1f97383a2f2c254986e182661c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41356
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Power key is a special non-matrixed key. Chrome /powerd
only listens to the keyboard device for this key, so add
its keymap.
BUG=b:155941390
TEST=Test that power key generates KEY_POWER in linux evtest
Change-Id: I570602d9febcb5c17e58761f2004ee88be16c27f
Signed-off-by: Rajat Jain <rajatja@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41382
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The chipset code was incorrectly adding memory resources
to the domain device after resource allocation occurred.
It's not possible to get the correct view of the address space,
and it's generally incorrect to not add resources during
read_resources(). This change fixes the order by adding resources in
read_resources().
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I49ce6ac88c4cb7cd05ff9d78133593ce97304596
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41374
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The chipset code was incorrectly adding memory resources
to the domain device after resource allocation occurred.
It's not possible to get the correct view of the address space,
and it's generally incorrect to not add resources during
read_resources(). This change fixes the order by adding resources in
read_resources().
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I419be7edf289636b24b9a7d6c390866ade638de3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The chipset code was incorrectly adding memory resources
to the domain device after resource allocation occurred.
It's not possible to get the correct view of the address space,
and it's generally incorrect to not add resources during
read_resources(). This change fixes the order by adding resources in
read_resources().
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I16f0439679471366723a0084918a20cd95834831
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41372
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The chipset code was incorrectly adding memory resources
to the domain device after resource allocation occurred.
It's not possible to get the correct view of the address space,
and it's generally incorrect to not add resources during
read_resources(). This change fixes the order by adding resources
during read_resources().
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I532f508936d5ec154cbcb3538949316ae4851105
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41369
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The chipset code was incorrectly adding memory resources
to the domain device after resource allocation occurred.
It's not possible to get the correct view of the address space,
and it's generally incorrect to not add resources during
read_resources(). This change fixes the order by adding resources in
read_resources().
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I84c1ba8645b548248a8bb8bf5bc4953d3be12475
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41368
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Keith Hui <buurin@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The chipset code was incorrectly adding memory resources
to the domain device after resource allocation occurred.
It's not possible to get the correct view of the address space,
and it's generally incorrect to not add resources during
read_resources(). Fix the order by hanging the resources off
of the host bridge device.
Change-Id: I8a7081020be43da055b7de5a56dd97a7b5a9f09c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41364
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This change uses cpu_phys_address_size() to calculate the size of high
MMIO region instead of a macro for each SoC. This ensures that the
entire range above TOUUD that can be addressed by the CPU is used for
MMIO above 4G boundary.
Change-Id: I01a1a86c0c65856f9f35185c2f233c58f18f5dfe
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41347
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
There should be no harm in advertising the MMIO window above 4G in
ACPI tables unconditionally. OS can decide whether or not to use the
window. This change removes the config option enable_above_4GB_mmio
and instead adds the correct MMIO window (above 4G) details to ACPI
tables always.
Change-Id: Ie728f6ee7f396918e61b29ade862b57dac36cb08
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41276
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change sets the base for MMIO above 4G to TOUDD. It matches what
is used by resource allocator if MMIO resources are allocated above 4G
and also matches the expectation in northbridge.asl. This change
also gets rid of the macro ABOVE_4GB_MEM_BASE_ADDRESS since it is now
unused.
BUG=b:149186922
TEST=Verified that kernel does not complain about MMIO windows above
4G.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ibbbfbdad867735a43cf57c256bf206a3f040f383
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41155
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The code is based on autoport and that for X230. Major differences are:
- Only one DDR3 slot
- HM77 PCH
- M.2 socket instead of mini pci-e
- no docking
- no tpm
Tested:
- CPU i5-3337U
- Slotted DIMM 8GiB
- Camera
- pci-e and usb2 on M.2 slot with A key for wlan
- sata and usb2 (no superspeed components) on M.2 slot with B key for wwan
- On board SDHCI connected to pci-e
- USB3 ports
- libgfxinit-based graphic init
- NVRAM options for North and South bridges
- Sound
- Thinkpad EC
- S3
- Linux 4.9 within Debian GNU/Linux stable, loaded from
Seabios.
Untested:
- Touch screen, which is said to work under ubuntu but not debian.
Change-Id: Ie537645d5ffaee799e79af2f821f80c3ebd2dfec
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41168
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch adds a SPI rom region RW_SPD_CACHE on Puff and it can be used
on spd_cache to reduce reading SPD data from SODIMM by smbus. It's for
saving the boot time and it can be used to trigger MRC retraining when
memory DIMM is changed.
BUG=b:146457985
BRANCH=None
TEST=Build puff successfully and verified below two items.
1. To change memory DIMM can trigger retraining.
2. one DIMM save the boot time : 158ms
two DIMM save the boot time : 265ms
Change-Id: I8d07fddf113a767d62394cb31e33b56f22f74351
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
This patch adds some spd_cache functions. They are for implementing the
spd_cache. It's for reducing the SPD fetch time when device uses SODIMMs.
The MRC cache also includes SPD data, but there is no public header file
available to decode the struct of MRC. So SPD cache is another solution.
BUG=b:146457985
BRANCH=None
TEST=Build puff successfully and verified below two items.
one DIMM save the boot time : 158ms
two DIMM save the boot time : 265ms
Change-Id: Ia48aa022fabf8949960a50597185c9d821399522
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
This patch adds the get_spd_sn function. It's for reading SODIMM serial
number. In spd_cache implementation it can use to get serial number
before reading whole SPD by smbus.
BUG=b:146457985
BRANCH=None
TEST=Wrote sample code to get the serial number and ran on puff.
It can get the serial number correctly.
Change-Id: I406bba7cc56debbd9851d430f069e4fb96ec937c
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40414
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Adds SPD_LPDDR4X_556b_1R_32Gb_8GbD_QDP_4267.spd.hex, which will be used
initially for the "H9HKNNNCRMBVAR-NEH" SKhynix part as DRAM ID #0.
Adds SPD_LPDDR4X_556b_1R_64Gb_16GbD_QDP_4267.spd.hex, which will be
used initially for the "MT53E1G64D4SQ-046 WT:A" Micron part as
DRAM ID #1.
BUG=b:155423877
TEST=none
Change-Id: I5580f602cd411e415dafcb36bd1ffa43c4f02f60
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41076
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- Add SPD_LPDDR4X_200b_1R_16Gb_16Row_DDP_4267.spd.hex, initially
used for the SKhynix H9HCNNNBKMMLXR-NEE part with DRAM ID #2
- Add SPD_LPDDR4X_200b_2R_64Gb_ODP_4267.spd.hex, initially
used for the SKhynix H9HCNNNFAMMLXR-NEE part with DRAM ID #3
- Add SPD_LPDDR4X_200b_2R_32Gb_QDP_4267.spd.hex, initially
used for the Micron MT53E1G32D2NP-046 WT:A part with DRAM ID #4
BUG=b:147857288
TEST=none
Change-Id: I60d8bb05a4d6d3608adc7de69efc8623d1ca610d
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41126
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Mainboard specific dock-init mechanism introduced
https://review.coreboot.org/c/coreboot/+/36093 works on most boards,
but https://ticket.coreboot.org/issues/256 shows that some boards
(e.g. x201 and t410) need communication with h8 EC to enable or
disable dock, (in dock_connect() and dock_disconnect() respectively)
so they must be done after the h8 EC is brought up, which is not
garanteed in the above mainboard specific dock-init mechanism.
This time, a hook function h8_mb_init() will be called at the end of
h8_enable(). (in place of the ancient h8_mainboard_init_dock() removed
in CB:36093) Its default implementation is a weak empty function, but
could be overrided with a strong one for boards needing to perform
actions which should be done after h8 EC is brought up.
This should fix the regression detected in
https://ticket.coreboot.org/issues/256
Change-Id: I3674fbfeab2ea2cd2a4453a8e77521157d553388
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
This change selects SOC_AMD_COMMON_BLOCK_HAS_ESPI which enables
the capability for using eSPI on Picasso.
Additionally, it also calls espi_setup() and espi_configure_decodes()
if mainboard enables use of eSPI and skips LPC decodes in that case.
BUG=b:153675913,b:154445472
Change-Id: I4876f1bff4305a23e8ccc48a2d0d3b64cdc9703d
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This change adds a helper function espi_setup() which allows SoCs to
configure connection to slave. Most of the configuration is dependent
upon mainboard settings in espi_config done as part of the device
tree. The general flow for setup involves the following steps:
1. Set initial configuration (lowest operating frequency and single mode).
2. Perform in-band reset and set initial configuration since the
settings would be lost by the reset.
3. Read slave capabilities.
4. Set slave configuration based on mainboard settings.
5. Perform eSPI host controller configuration to match the slave
configuration and set polarities for VW interrupts.
6. Perform VW channel setup and deassert PLTRST#.
7. Perform peripheral channel setup.
8. Perform OOB channel setup.
9. Perform flash channel setup.
10. Enable subtractive decoding if requested by mainboard.
BUG=b:153675913
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I872ec09cd92e9bb53f22e38d2773f3491355279e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41272
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Memory SPD files for each variant are now stored in the variant's
mb/google/volteer/variants/<variant_name>/spd directory instead
of storing them in mb/google/volteer/spd.
This change moves SPDs to where they are needed and changes the
makefile to look for them in their new locations.
BUG=b:156126658
TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot
a proto2 SKU4 to the kernel.
Change-Id: I759c979027477a2a4c5489a6b12278799488d6e7
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41184
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To change frequency, the SOC PLL team suggests procedure below:
First, we need to enable the intermediate clock and
switch the ca53 clock source to the intermediate clock.
Second, disable the armpll_ll clock output.
Third, raise armpll_ll frequency and enable the clock output.
The last, switch the ca53 clock source back to armpll_ll and
disable the intermediate clock.
BUG=b:154451241
BRANCH=jacuzzi
TEST=Boots correctly on Jacuzzi.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Change-Id: Ib9556ba340da272fb62588f45851c93373cfa919
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41077
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
CB:41194 got rid of "this file is part of" lines. However, there are
some changes that landed right around the same time including those
lines. This change uses the following command to drop the lines from
new files:
sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool)
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ic3c1d717416f6b7e946f84748e2b260552c06a1b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41342
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Immediately following FSP-S, update the data fabric routing
registers to make the region between HPET and LAPIC as non-posted.
If AGESA is modified to do this, we can delete data_fabric_util.c. If
AGESA is modified to not program the registers, then we can simplify
data_fabric_set_mmio_np().
BUG=b:147042464, b:156296146
TEST=boot trembyle
Change-Id: Idbafaac158f5a4c533d2d88db79bb4d6244e5355
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41268
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Family 17h devices are designed with a new internal architecture,
frequently referred to as the data fabric. Although designed to
behave somewhat like the older integrated northbridge designs,
the D18Fx definitions are completely new.
The previous northbridge.c was copied from stoneyridge which is
completely different.
Change-Id: Id70cbda99657249179fb8cf5e461dd6a37ec9153
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41265
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When any USB image disk is connected to the DUT through
HUAWEI/APPLE Dongle, press Ctrl + u on the dev screen,
it cannot boot from USB.
We found the SS hub cannot be enumerated. So disable xHCI
compliance mode.
BRANCH=octopus
BUG=b:155347573
TEST=Confirm successful boot from USB
Change-Id: Iea4a3df156da0627336f7d6c1e03837b6cf0e7f2
Signed-off-by: tong.lin <tong.lin@bitland.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40905
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds a helper function lpc_early_init() which does the
following things:
1. Enables LPC controller
2. Disables any LPC decodes (These can be set up later by SoC or
mainboard as required).
3. Sets SPI base so that MMIO base for SPI and eSPI controllers is
initialized.
BUG=b:153675913
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I016f29339466c3fee92fe9b62a13d72297c29b8e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41257
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Picasso has an LPC and eSPI bridge on the same PCI DEVFN. They can both
be active at the same time. This adds a way to specify which devices
belong on which bus.
i.e.,
device pci 14.3 on # - D14F3 bridge
device espi 0 on
chip ec/google/chromeec
device pnp 0c09.0 on end
end
end
device lpc 0 on
end
end
BUG=b:154445472
TEST=Built trembyle and saw static.c contained the espi bus.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I0c2f40813c05680f72e5f30cbb13617e8f994841
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41099
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The default setting of the root port ASPM configuration can be
overridden from the device tree by using a non zero value.
BUG=N/A
TEST=tested on facebook monolith
Change-Id: I85c545d5eacb10f43b94228f1caf1163028645e0
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41171
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Current Interrupt setting use 2nd parameters as device function number.
- Correct as interrupt pin number according to _PRT package format.
{Address, pin, Source, Source index}
- Use irq number directly rather than irq definition as its number
is not for PCI device.
The issue found while enabling GBE and GBE interrupt is not working
without this change.
Reference
- ACPI spec 6.2.13 _PRT
- FSP reference code:
https://github.com/otcshare/CCG-TGL-Generic-SiC/blob/TGL.3163.01/
ClientOneSiliconPkg/IpBlock/Itss/LibraryPrivate/PeiItssPolicyLib/
PeiItssPolicyLibVer2.c
- BIOS reference code:
https://github.com/otcshare/CCG-TGL-Generic-Full/blob/master/
TigerLakeBoardPkg/Acpi/AcpiTables/Dsdt/PciTree.asl
TEST=boot to OS with GBE enabled and check GBE interrupt
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I8084b30c668c155ebabbee90b5f70054813b328e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41153
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
pci_domain_set_resources is duplicated in all the SOCs. This change
promotes the duplicated function.
Picasso was adding it again in the northbridge patch. I decided to
promote the function instead of duplicating it.
BUG=b:147042464
TEST=Build and boot trembyle.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Iba9661ac2c3a1803783d5aa32404143c9144aea5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41041
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change provides a helper function espi_update_static_bar() that
informs the eSPI common driver about the static BAR to use for eSPI
controller instead of reading the SPIBASE. This is required to support
the case of verstage running on PSP.
BUG=b:153675913
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I1f11bb2e29ea0acd71ba6984e42573cfe914e5d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41256
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
FSP provides the UPD's for SATA and DMI power optimization.
In this patch we are adding the soc's config support to set
those power optimization bits in FSP. By default those
optimizations are enabled. To disable those we need to set
the DmiPwrOptimizeDisable and SataPwrOptimizeDisable to 1
in devicetree.
BUG=b:151162424
BRANCH=None
TEST=Build and boot volteer and TGL RVP.
Change-Id: Iefc5e7e48d69dccae43dc595dff2f824e53f5749
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This change adds the following helper functions for eSPI decode:
1. espi_open_io_window() - Open generic IO window decoded by eSPI
2. espi_open_mmio_window() - Open generic MMIO window decoded by eSPI
3. espi_configure_decodes() - Configures standard and generic I/O
windows using the espi configuration provided by mainboard in device tree.
BUG=b:153675913,b:154445472
Change-Id: Idb49ef0477280eb46ecad65131d4cd7357618941
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41073
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds eSPI register definitions for I/O and MMIO decode
using eSPI on AMD SoCs. Additionally, it also adds a macro to define
the offset of ESPI MMIO base from SPI MMIO base.
BUG=b:153675913
Change-Id: Ifb70ae0c63cc823334a1d851faf4dda6d1c1fc1a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41072
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change adds support for using common SoC configuration by adding
soc_amd_common_config to soc_amd_picasso_config and helper function to
return pointer to the structure to amd common block code.
Change-Id: I8bd4eac3b19c9ded2d9a3e95ac077f014730f9d1
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41249
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change adds support for following SPI configuration functions to
common block SPI driver and exposes them to be used by SoC:
1. fch_spi_early_init(): Sets up SPI ROM base, enables SPI ROM,
enables prefetching, disables 4dw burst mode and sets SPI speed and mode.
2. fch_spi_config_modes(): This allows SoC to configure SPI speed and
mode. It uses SPI settings from soc_amd_common_config to configure the
speed and mode.
These functions expect SoC to include soc_amd_common_config in SoC
chip config and mainboard to configure these settings in device tree.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ia4f231bab69e8450005dd6abe7a8e014d5eb7261
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41248
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds a Kconfig option to request allocation of prefetch
memory for hotplug devices above the 4G boundary. In order to
select this option by default and still allow users to disable this if
required, another option is added to request allocation of prefetch
memory below 4G boundary which defaults to n but can be overriden
by mainboards.
Without this change, if the number of pciexp bridges supporting
hot-plug is more than 4 or if the reserved prefetch memory size for
hot-plug cases was increased, then the resource allocator would fail
to satisfy the resource requirement below 4G boundary.
BUG=b:149186922
TEST=Enabled resource allocation above 4G for prefetch memory on volteer
and verified that it gets allocated above 4G boundary.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I061d935eef9fcda352230b03b5cf14e467924e50
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39489
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change updates the resource limit for PCI domain to allow
resource allocation above 4G boundary. The resource limit is set to
the highest physical address for the CPU.
BUG=b:149186922
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Idfcc9a390d309886ee2b7880b29502c740e6578e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39488
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds support for allocating resources above the 4G
boundary by making use of memranges for resource windows enabled in
the previous CL.
It adds a new resource flag IORESOURCE_ABOVE_4G which is used in the
following ways:
a) Downstream device resources can set this flag to indicate that they
would like to have their resource allocation above the 4G
boundary. These semantics will have to be enabled in the drivers
managing the devices. It can also be extended to be enabled via
devicetree. This flag is automatically propagated by the resource
allocator from downstream devices to the upstream bridges in pass
1. It is done to ensure that the resource allocator has a global view
of downstream requirements during pass 2 at domain level.
b) Bridges have a single resource window for each of mem and prefmem
resource types. Thus, if any downstream resource of the bridge
requests allocation above 4G boundary, all the other downstream
resources of the same type under the bridge will be allocated above 4G
boundary.
c) During pass 2, resource allocator at domain level splits
IORESOURCE_MEM into two different memory ranges -- one for the window
below 4G and other above 4G. Resource allocation happens separately
for each of these windows.
d) At the bridge level, there is no extra logic required since the
resource will live entirely above or below the 4G boundary. Hence, all
downstream devices of any bridge will fall within the window allocated
to the bridge resource. To handle this case separately from that of
domain, initializing of memranges for a bridge is done differently
than the domain.
Limitation:
Resources of a given type at the bridge or downstream devices
cannot live both above and below 4G boundary. Thus, if a bridge has
some downstream resources requesting allocation for a given type above
4G boundary and other resources of the same type requesting allocation
below 4G boundary, then all these resources of the same type get
allocated above 4G boundary.
BUG=b:149186922
TEST=Verified that resources get allocated above the 4G boundary
correctly on volteer.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I7fb2a75cc280a307300d29ddabaebfc49175548f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39487
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change updates the resource allocator in coreboot to allow using
multiple ranges for resource allocation rather than restricting
available window to a single base/limit pair. This is done in
preparation to allow 64-bit resource allocation.
Following changes are made as part of this:
a) Resource allocator still makes 2 passes at the entire tree. The
first pass is to gather the resource requirements of each device
under each domain. It walks recursively in DFS fashion to gather the
requirements of the leaf devices and propagates this back up to the
downstream bridges of the domain. Domain is special in the sense that
it has fixed resource ranges. Hence, the resource requirements from
the downstream devices have no effect on the domain resource
windows. This results in domain resource limits being unmodified after
the first pass.
b) Once the requirements for all the devices under the domain are
gathered, resource allocator walks a second time to allocate resources
to downstream devices as per the requirements. Here, instead of
maintaining a single window for allocating resources, it creates a
list of memranges starting with the resource window at domain and then
applying constraints to create holes for any fixed resources. This
ensures that there is no overlap with fixed resources under the
domain.
c) Domain does not differentiate between mem and prefmem. Since they
are allocated space from the same resource window at the domain level,
it considers all resource requests from downstream devices of the
domain independent of the prefetch type.
d) Once resource allocation is done at the domain level, resource
allocator walks down the downstream bridges and continues the same
process until it reaches the leaves. Bridges have separate windows for
mem and prefmem. Hence, unlike domain, the resource allocator at
bridge level ensures that downstream requirements are satisfied by
taking prefetch type into consideration.
e) This whole 2-pass process is performed for every domain in the
system under the assumption that domains do not have overlapping
address spaces.
Noticeable differences from previous resource allocator:
a) Changes in print logs observed due to flows being slightly
different.
b) Base, limit and size of domain resources are no longer updated
based on downstream requirements.
c) Memranges are used instead of a single base/limit pair for
determining resource allocation.
d) Previously, if a resource request did not fit in the available
base/limit window, then the resource would be allocated over DRAM or
any other address space defeating the principle of "no overlap". With
this change, any time a resource cannot fit in the available ranges,
it complains and ensures that the resource is effectively disabled by
setting base same as the limit.
e) Resource allocator no longer looks at multiple links to determine
the right bus for a resource. None of the current boards have multiple
buses under any downstream device of the domain. The only device with
multiple links seems to be the cpu cluster device for some AMD
platforms.
BUG=b:149186922
TEST=Verified that resource allocation looks correct based on
addresses assigned on Volteer.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ia1f089877c62e119c6a994a10809c9cc0050ec9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39486
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently inteltool uses the addresses and names of the PCH of
previous generations. It's wrong for Lynx Point LP and Wildcat Point.
The addresses and names of the I/O registers can be found in "Mobile
4th Generation Intel Core Processor Family I/O Datasheet" (Document
Number: 329003-003) for Lynx Point LP and "Mobile 5th Generation Intel
Core Processor Family I/O, Intel Core M Processor Family I/O, Mobile
Intel Pentium Processor Family I/O, and Mobile Intel Celeron Processor
Family I/O Datasheet" (Document Number: 330837-004) for Wildcat Point.
Change-Id: If6ba718ccff077aa89affec89018bd7923527466
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40273
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit cc805d9dd6.
Advertising certain Windows versions triggers different paths in
the OS. As there may also be device specific quirks in the OS, such
changes need to be tested thoroughly on all affected devices.
There was at least one very subtle regression introduced by this.
When Linux sees "Windows 2012" support advertised, it disables the
`acpi_video` backlight controls, at least on devices with Intel IGD.
Without user-space handling the ACPI events, keyboard backlight
controls stop working.
Moreover, the commit message didn't state any reason for this change.
Why was it merged?
Change-Id: I722075f8e8f836b039fb8b8277e665fb49dac8f4
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41192
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This change splits lpc_set_spibase() into two separate functions:
lpc_set_spibase() - Sets MMIO base address for SPI controller and eSPI
controller (if supported by platforms)
lpc_enable_spi_rom() - Enables SPI ROM
This split is done to allow setting of MMIO base independent of ROM
enable bits. On platforms like Picasso, eSPI base is determined by the
same register and hence eSPI can set the BAR without having to touch
the enable bits.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I3f270ba1745b4bb8a403f00cd069a02e21d444be
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This change adds support for struct soc_amd_common_config that allows
multiple AMD SoCs to share common configuration. This can then be used
by common/block drivers to get the required configuration from device
tree. It also provides function declaration for
soc_get_common_config() that needs to be provided by SoCs making use
of the common configuration structure.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Idb0d797525414c99894a8e4ede65469381db7794
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41246
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12 18:58:54 +00:00
6953 changed files with 426938 additions and 115598 deletions
SMMSTORE is a SMM mediated driver to read from, write to and erase a
SMMSTORE is a [SMM] mediated driver to read from, write to and erase a
predefined region in flash. It can be enabled by setting
`CONFIG_SMMSTORE=y` in menuconfig.
@ -117,7 +117,18 @@ INPUT:
-`val`: pointer to the value data
-`valsize`: size of the value data
#### Security
Pointers provided by the payload or OS are checked to not overlap with the SMM.
That protects the SMM handler from being manipulated.
*However there's no validation done on the source or destination pointing to
DRAM. A malicious application that is able to issue SMIs could extract arbitrary
data or modify the currently running kernel.*
## External links
* [A Tour Beyond BIOS Implementing UEFI Authenticated Variables in SMM with EDKI](https://software.intel.com/sites/default/files/managed/cf/ea/a_tour_beyond_bios_implementing_uefi_authenticated_variables_in_smm_with_edkii.pdf)
Note, this differs significantly from coreboot's implementation.
This documents the API exposed by the x86 system management based
storage driver.
## SMMSTOREv2
SMMSTOREv2 is a [SMM] mediated driver to read from, write to and erase
a predefined region in flash. It can be enabled by setting
`CONFIG_SMMSTORE=y` and `CONFIG_SMMSTORE_V2=y` in menuconfig.
This can be used by the OS or the payload to implement persistent
storage to hold for instance configuration data, without needing to
implement a (platform specific) storage driver in the payload itself.
### Storage size and alignment
SMMSTORE version 2 requires a minimum alignment of 64 KiB, which should
be supported by all flash chips. Not having to perform read-modify-write
operations is desired, as it reduces complexity and potential for bugs.
This can be used by a FTW (FaultTolerantWrite) implementation that uses
at least two regions in an A/B update scheme. The FTW implementation in
EDK2 uses three different regions in the store:
- The variable store
- The FTW spare block
- The FTW working block
All regions must be block-aligned, and the FTW spare size must be larger
than that of the variable store. FTW working block can be much smaller.
With 64 KiB as block size, the minimum size of the FTW-enabled store is:
- The variable store: 1 block = 64 KiB
- The FTW spare block: 2 blocks = 2 * 64 KiB
- The FTW working block: 1 block = 64 KiB
Therefore, the minimum size for EDK2 FTW is 4 blocks, or 256 KiB.
## API
The API provides read and write access to an unformatted block storage.
### Storage region
By default SMMSTOREv2 will operate on a separate FMAP region called
`SMMSTORE`. The default generated FMAP will include such a region. On
systems with a locked FMAP, e.g. in an existing vboot setup with a
locked RO region, the option exists to add a cbfsfile called `smm_store`
in the `RW_LEGACY` (if CHROMEOS) or in the `COREBOOT` FMAP regions. It
is recommended for new builds using a handcrafted FMD that intend to
make use of SMMSTORE to include a sufficiently large `SMMSTORE` FMAP
region. It is mandatory to align the `SMMSTORE` region to 64KiB for
compatibility with the largest flash erase operation.
When a default generated FMAP is used, the size of the FMAP region is
equal to `CONFIG_SMMSTORE_SIZE`. UEFI payloads expect at least 64 KiB.
To support a fault tolerant write mechanism, at least a multiple of
this size is recommended.
### Communication buffer
To prevent malicious ring0 code to access arbitrary memory locations,
SMMSTOREv2 uses a communication buffer in CBMEM/HOB for all transfers.
This buffer has to be at least 64 KiB in size and must be installed
before calling any of the SMMSTORE read or write operations. Usually,
coreboot will install this buffer to transfer data between ring0 and
the [SMM] handler.
In order to get the communication buffer address, the payload or OS
has to read the coreboot table with tag `0x0039`, containing:
```C
structlb_smmstorev2{
uint32_ttag;
uint32_tsize;
uint32_tnum_blocks;/* Number of writeable blocks in SMM */
uint32_tblock_size;/* Size of a block in byte. Default: 64 KiB */
uint32_tmmap_addr;/* MMIO address of the store for read only access */
uint32_tcom_buffer;/* Physical address of the communication buffer */
uint32_tcom_buffer_size;/* Size of the communication buffer in byte */
uint8_tapm_cmd;/* The command byte to write to the APM I/O port */
uint8_tunused[3];/* Set to zero */
};
```
The absence of this coreboot table entry indicates that there's no
SMMSTOREv2 support.
### Blocks
The SMMSTOREv2 splits the SMMSTORE FMAP partition into smaller chunks
called *blocks*. Every block is at least the size of 64KiB to support
arbitrary NOR flash erase ops. A payload or OS must make no further
assumptions about the block or communication buffer size.
### Generating the SMI
SMMSTOREv2 is called via an SMI, which is generated via a write to the
IO port defined in the smi_cmd entry of the FADT ACPI table. `%al`
contains `APM_CNT_SMMSTORE=0xed` and is written to the smi_cmd IO
port. `%ah` contains the SMMSTOREv2 command. `%ebx` contains the
parameter buffer to the SMMSTOREv2 command.
### Return values
If a command succeeds, SMMSTOREv2 will return with
`SMMSTORE_RET_SUCCESS=0` in `%eax`. On failure SMMSTORE will return
`SMMSTORE_RET_FAILURE=1`. For unsupported SMMSTORE commands
`SMMSTORE_REG_UNSUPPORTED=2` is returned.
**NOTE 1**: The caller **must** check the return value and should make
no assumption on the returned data if `%eax` does not contain
`SMMSTORE_RET_SUCCESS`.
**NOTE 2**: If the SMI returns without changing `%ax`, it can be assumed
that the SMMSTOREv2 feature is not installed.
### Calling arguments
SMMSTOREv2 supports 3 subcommands that are passed via `%ah`, the
additional calling arguments are passed via `%ebx`.
**NOTE**: The size of the struct entries are in the native word size of
smihandler. This means 32 bits in almost all cases.
#### - SMMSTORE_CMD_INIT = 4
This installs the communication buffer to use and thus enables the
SMMSTORE handler. This command can only be executed once and is done
by the firmware. Calling this function at runtime has no effect.
The additional parameter buffer `%ebx` contains a pointer to the
following struct:
```C
structsmmstore_params_init{
uint32_tcom_buffer;
uint32_tcom_buffer_size;
}__packed;
```
INPUT:
-`com_buffer`: Physical address of the communication buffer (CBMEM)
-`com_buffer_size`: Size in bytes of the communication buffer
#### - SMMSTORE_CMD_RAW_READ = 5
SMMSTOREv2 allows reading arbitrary data. It is up to the caller to
initialize the store with meaningful data before using it.
The additional parameter buffer `%ebx` contains a pointer to the
following struct:
```C
structsmmstore_params_raw_read{
uint32_tbufsize;
uint32_tbufoffset;
uint32_tblock_id;
}__packed;
```
INPUT:
-`bufsize`: Size of data to read within the communication buffer
-`bufoffset`: Offset within the communication buffer
-`block_id`: Block to read from
#### - SMMSTORE_CMD_RAW_WRITE = 6
SMMSTOREv2 allows writing arbitrary data. It is up to the caller to
erase a block before writing it.
The additional parameter buffer `%ebx` contains a pointer to
the following struct:
```C
structsmmstore_params_raw_write{
uint32_tbufsize;
uint32_tbufoffset;
uint32_tblock_id;
}__packed;
```
INPUT:
-`bufsize`: Size of data to write within the communication buffer
-`bufoffset`: Offset within the communication buffer
-`block_id`: Block to write to
#### - SMMSTORE_CMD_RAW_CLEAR = 7
SMMSTOREv2 allows clearing blocks. A cleared block will read as `0xff`.
By providing multiple blocks the caller can implement a fault tolerant
write mechanism. It is up to the caller to clear blocks before writing
to them.
```C
structsmmstore_params_raw_clear{
uint32_tblock_id;
}__packed;
```
INPUT:
-`block_id`: Block to erase
#### Security
Pointers provided by the payload or OS are checked to not overlap with
SMM. This protects the SMM handler from being compromised.
As all information is exchanged using the communication buffer and
coreboot tables, there's no risk that a malicious application capable
of issuing SMIs could extract arbitrary data or modify the currently
running kernel.
## External links
* [A Tour Beyond BIOS Implementing UEFI Authenticated Variables in SMM with EDKI](https://software.intel.com/sites/default/files/managed/cf/ea/a_tour_beyond_bios_implementing_uefi_authenticated_variables_in_smm_with_edkii.pdf)
Note that this differs significantly from coreboot's implementation.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
