The Lemur Pro 13 (lemp13) is an Intel Meteor Lake-U based board.
There are 2 variants to differentiate which keyboard design the unit
uses, as they require different EC firmware.
Change-Id: Icac8c7dafd6371881622d797f399f8ddbe13cbce
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
The Darter Pro 10 (darp10) is an Intel Meteor Lake-H based board.
There are 2 variants in order to differentiate the 14" and 16" models,
as they have different keyboards and so have different EC firmware.
Change-Id: Iaef03a47cf108591ef823bfa779777c7c05c6337
Signed-off-by: Tim Crawford <tcrawford@system76.com>
The Razer Blade Stealth Kaby Lake has 2 variants. One is the H2U
variant, as originally committed, with the SKU number RZ09-01962, also
known as the 2016 model, and the H3Q model with SKU numbers RZ09-01963
and RZ09-01964, known as the Mid 2017 model. This commit adds support
for the H3Q model. With respect to coreboot, there are few known
differences:
1. Only the H2U has TPM.
2. The USB ports are different.
3. The screen size (and therefore VBIOS Table) is different.
4. The hda_verb is very slightly different.
5. The gpio is different.
Change-Id: I493a651e52c2eb938daa67a05e9caaa784020fa4
Signed-off-by: Reagan Bohan <xbjfk.github@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82506
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Apply commit c6b65c1a81 ("soc/intel/alderlake: Enable USB2 port reset
message on Type-C ports") to Meteor Lake.
This change is added to address the issue of USB3 ports downgrading to
high speed during low power modes and not returning back to super speed.
The patch enables port reset event on USB2 ports. This event is
is passed to USB3 upstream ports to upgrade back to super speed (USB3)
after a downgrade during low power state.
Change-Id: Iac702a8d8edd2b3b7e03abcac020be7e45335821
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82730
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
linux_trampoline.c generation is broken with latest crossgcc-i386
toolchain. Fix the issue to enable the building.
../cbfstool/linux_trampoline.S: Assembler messages:
../cbfstool/linux_trampoline.S💯 Error: no instruction mnemonic
suffix given and no register operands; can't size
instruction
<builtin>: recipe for target '../cbfstool/linux_trampoline.o'
failed
TEST=Build and boot on intel/archercity CRB
cd util/cbfstool/
rm linux_trampoline.c
make linux_trampoline.c
Change-Id: I7faca296f946bb4e9fd510661357925e5dcf9a6b
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82704
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The comment that the PchHdaAudioLink UPDs only configure GPIOs is
incorrect. Setting this to 1 is needed to enable HDA audio link.
Same exact situation as with Alder Lake in CL 71715.
Change-Id: Iecbe106ae18b5a8b53c04a5335a4e4c4ae27c7a0
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82685
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Initial commit is a copy of ec/system76/ec from tag v24.02.1 (commit
0a280ff7) with string changes. Dasharo-specific features will be added
in subsequent commits, similar to how Librem EC support was added in
changes 52390 and 52391.
Change-Id: Ic7c3d9413488026548514963eb78accc28e41e06
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
coreboot needs to figure out top of memory to place CBMEM data. On some
non-x86 QEMU virtual machines, this is achieved by probing the RAM space
to find where the VM starts discarding data since it's not backed by
actual RAM. This behaviour seems to have changed on the QEMU side since
then, VMs using the "virt" model have started raising exceptions/errors
instead of silently discarding data (likely [1] for example) which has
previously broken coreboot on these emulation boards.
The qemu-aarch64 and qemu-riscv mainboards are intended for the "virt"
models and had this issue, which were mostly fixed by using exception
handlers in the RAM detection process [2][3]. But on 32-bit RISC-V we
fail to initialize CBMEM if we have 2048 MiB or more of RAM, and on
64-bit RISC-V we had to limit probing to 16383 MiB because it can run
into MMIO regions otherwise.
The qemu-armv7 mainboard code is intended for the "vexpress-a9" model VM
which doesn't appear to suffer from this issue. Still, the issue can be
observed on the ARMv7 "virt" model via a port based on qemu-aarch64.
QEMU docs for ARM and RISC-V "virt" models [4][5] recommend reading the
device tree blob it provides for device information (incl. RAM size).
Implement functions that parse the device tree blob to find described
memory regions and calculate the top of memory in order to use it in
mainboard code as an alternative to probing RAM space. ARM64 code
initializes CBMEM in romstage where malloc isn't available, so take care
to do parsing without unflattening the blob and make the code available
in romstage as well.
[1] https://lore.kernel.org/qemu-devel/1504626814-23124-1-git-send-email-peter.maydell@linaro.org/T/#u
[2] https://review.coreboot.org/c/coreboot/+/34774
[3] https://review.coreboot.org/c/coreboot/+/36486
[4] https://qemu-project.gitlab.io/qemu/system/arm/virt.html
[5] https://qemu-project.gitlab.io/qemu/system/riscv/virt.html
Change-Id: I8bef09bc1bc4e324ebeaa37f78d67d3aa315f52c
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80322
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The crashlog code in intel/common/block and meteorlake soc
was casting integer addresses directly to pointer types,
which caused compilation errors in x86_64 bit builds.
This commit fixes the issue by using uintptr_t for casting
integer addresses to pointer types before dereferencing.
BUG=b:329034258
TEST=Successfully build Meteor Lake (rex) in both x86_32 and
x86_64 modes.
Change-Id: I2d0814a8b767270ec140341bfb51d0782469545d
Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82481
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
For multi-SKU/SoC supports, IIO domain layouts are returned from FSP
HOBs. Add _OSC ASL generation utils so that static IIO domain layout
definition file per SKU/SoC are not needed any more.
The _OSC generation codes is a thin AML generation layer which
further invokes \_SB.POSC which is defined in ASL. The ASL handler
is able to handle boot-time generated info as parameters while keeps
good readability for the ease of maintenance. In this case, firmware
granted capabilities are calculated in boot time and passed to ASL
handler as parameters.
TEST=Build and boot on intel/archercity CRB
Change-Id: Ibd3bfa2428725fe593754436d5ed75a3a11b4cdc
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82034
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
This commit removes config guard around FSPM_ARCH_UPD from the
FspApi.h header file. This change is done to ensure
that this header file can be used with both x86_32 and x86_64
architectures and also with different FSP specification versions.
The following modifications are made:
- Removes PLATFORM_USES_FSP2_X86_32 config guard around
FSPM_ARCH_UPD, this was added to isolate the structure from
x64 build. This is not really required since the x64 build uses
FSP2.4 structures.
BUG=b:343428206
TEST=Verified x86_32 and x86_64 builds on Meteor Lake board (Rex)
Change-Id: Idc849de73723036323f81dfd055730f6669cd52e
Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82425
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
EnableMultiPhaseSiliconInit upd is deprecated and has been
removed starting with v2.4 of FSP specification. Multi-phase
silicon initialization is mandatory for all FSP implementations
compliant to v2.4.
The following modifications are made:
- In fsp_params.c and silicon_init.c EnableMultiPhaseSiliconInit
update is guarded so that it will get included only if FSP2.4
is not selected.
BUG=b:329034258
TEST=Verified x86_32 and x86_64 builds on Meteor Lake board (Rex)
Change-Id: Icdbf3bacc0a05975fc941b264fd400d74f506fce
Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
* Conditionally select FSP 2.4 when x86_64 support is available
(HAVE_X86_64_SUPPORT).
* Default to FSP 2.3 otherwise.
* Adjust default FSP header path to align with architecture.
BUG=b:242829490
TEST=Able to build google/rex in both 32-bit and 64-bit mode.
Change-Id: Ib77a34c6bf7bca3485a197f109d1550ac3d51cc0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82624
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
This change allows eSOL to be enabled on production Meteor Lake silicon
even when 64-bit support is not present. eSOL support is still TBD for
64-bit FSP hence, skip adding this support for 64-bit build.
TEST=Able to build and boot google/rex64 w/o eSOL.
Change-Id: I16762e5b74ae0aaa3c28730479a1fd9defc4d93c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82716
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit introduces new header files of V3471.91 for the x86_64
architecture in the fsp2_0/meteorlake directory. FSP2.4 brings FSP
64-bits support and the soc Kconfig file has been updated to select
this new header path when FSP2.4 is in use.
BUG=b:329034258
TEST=Verified x86_32 and x86_64 builds on Meteor Lake board (Rex)
Change-Id: Ib41b57e794311db729ac65a968f562aa127e86c3
Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82473
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
This commit moves FSP V3471.91 header files for Meteor Lake
into a new x86_32 directory to better organize the files based
on the architecture. The Kconfig file has been modified accordingly
to reflect the new paths of the relocated headers.
BUG=b:329034258
TEST=Verified x86_32 and x86_64 builds on Meteor Lake board (Rex)
Change-Id: Id30186a8b1b5a9082f498e18a3378f5e9907b668
Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82424
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
This commit updates the type definitions for FSP parameters in the
Meteor Lake platform to ensure compatibility with the FSP2.4
specification, that supports 64-bit builds for the first time and
this also ensures that parameter types works for both 32-bit
and 64-bit builds.
- In fsp_params.c, FSPS_ARCH_UPD macro is changed to
FSPS_ARCHx_UPD which supports FSP2.4 and older specifications.
Special handling is added for FspEventHandler assignment to handle
as the variable type is different in both cases.
- In meminit.c, the type for SPD pointers is changed from uint32_t
to efi_uintn_t to support both 32-bit and 64-bit builds.
BUG=b:329034258
TEST=Verified x86_32 and x86_64 builds on Meteor Lake board (Rex)
Change-Id: Ide220f60184135a6488f4472f69a471e2b383e2a
Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82177
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since this mainboard no longer uses the FSP GOP driver, the DDI port
settings are no longer necessary. The GOP driver was used in the initial
phase of development where we used Tianocore as payload for some test
cases. Finally, this mainboard uses a self-made Linux payload, which
does the graphic initialization.
BUG=none
TEST=Boot into Linux and check if graphic works correctly
Change-Id: Ie9e135fbc2627546d6ef95d7d5ff3e9a9222b5d2
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82663
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Some drives block the CPU from reaching C10 during S0ix suspend without
the RTD3 configs.
Fixes suspend with the following drives:
- Kingston KC3000 (SKC3000D/4096G)
- Kingston HyperX (SHPM2280P2H/240G)
- Solidigm P44 Pro (SSDPFKKW010X7)
The following drives continue to work:
- Samsung 970 Evo (MZVLB250HAHQ)
- WD Black SN770 (WDS250G3X0E)
- WD Green SN350 (WDS240G2G0C-00AJM0)
- WD Blue SN570 (WDS100T3B0C)
Change-Id: Ia369727d0f1aa5ff546cfb5700a63063730e8248
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Tested-by: Levi Portenier <levi@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Code dealing with PAE can be used outside of memset_pae(). This change
extracts creation of identity mapped pagetables to init_pae_pagetables()
and mapping of single 2 MiB map to pae_map_2M_page(). Both functions are
exported in include/cpu/x86/pae.h to allow use outside of pgtbl.c.
MEMSET_PAE_* macros were renamed to PAE_* since they no longer apply
only to memset_pae().
Change-Id: I8aa80eb246ff0e77e1f51d71933d3d00ab75aaeb
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82249
Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
<stdio.h> header is used for input/output operations (such as printf,
scanf, fopen, etc.). Although some input/output functions can manipulate
strings, they do not need to directly include <string.h> because they
are declared independently.
Change-Id: Ibe2a4ff6f68843a6d99cfdfe182cf2dd922802aa
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82665
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GCC-14 documentation says "The first argument to calloc is documented to
be number of elements in array, while the second argument is size of
each element, so calloc(n, sizeof (int)) is preferred over
calloc(sizeof(int), n)."
Change-Id: I77b6f4d2eda487b087ba5665b588999633c33e8d
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82658
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Commit 4c7e97b26a ("Update fsp submodule to upstream master branch")
included an update to the VBT from 240 to 250, breaking parsing of
existing VBTs.
After that commit, the VBT was parsed as (from gaze16-3060-b):
[DEBUG] PCI: 00:02.0 init
[INFO ] GMA: Found VBT in CBFS
[INFO ] GMA: Found valid VBT in CBFS
[INFO ] framebuffer_info: bytes_per_line: 4096, bits_per_pixel: 32
[INFO ] x_res x y_res: 1024 x 768, size: 3145728 at 0xd0000000
[DEBUG] PCI: 00:02.0 init finished in 6 msecs
When the expected output is:
[DEBUG] PCI: 00:00:02.0 init
[INFO ] GMA: Found VBT in CBFS
[INFO ] GMA: Found valid VBT in CBFS
[INFO ] framebuffer_info: bytes_per_line: 7680, bits_per_pixel: 32
[INFO ] x_res x y_res: 1920 x 1080, size: 8294400 at 0xd0000000
[DEBUG] PCI: 00:00:02.0 init finished in 6 msecs
Generate blobs for the new version using Intel Display Configuration
Tool (DisCon) v3.3, based on the existing 237 and 240 VBTs.
(For our edk2 payload, the UEFI GOP driver was updated to 17.0.1077.)
Tested on all affected systems:
- darp7
- galp5
- gaze16-3050
- gaze16-3060
- gaze16-3060-b
- lemp10
- oryp8
Tested:
- Boot splash displays on screen again
- Firmware setup menu is rendered, at correct resolution
Change-Id: I918356d9f660b985ee4408ef77544fbd071ab35f
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Tested-by: Daniel Sutton <daniel@system76.com>
Tested-by: Jacob Kauffmann <jacob@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82246
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
This patch marks unused USB ports (USB2.0/TCSS) empty to avoid
prompting wrong dmesg as below.
```
usb usb2-port3: Cannot enable. Maybe the USB cable is bad?
```
Trulo variants to override the USB ports as per the target
board design.
TEST=Able to build google/trulo.
Change-Id: I6240e66ed3d1a7198c1a526fdca2483910157235
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82651
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Add a new proximity type to represent the sub-NUMA cluster (SNC).
This patch adds necessary Xeon-SP common code level support for
SNC support. When SNC on, each SNC cluster will have a proximity
domain. DIMMs and CPU cores are attached to SNC proximity domains
instead of the processor proximity domains.
With SNC, there are 3 types of proximity domains,
PD_TYPE_PROCESSOR, PD_TYPE_GENERIC_INITIATOR and PD_TYPE_CLUSTER.
proximity domain type checks in Xeon-SP codes are updated to
correctly handle the adding of the new type.
This patch doesn't actually enable SNC. To fully enable SNC, SoC
codes need to override soc_get_cluster_count(), soc_set_cpu_node_
id() and memory_to_pd(), and call soc_set_cpu_node_id() in its
per-CPU init routine.
Change-Id: I32558983780f302ff4893901540a90baebf47add
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Co-authored-by: Ziang Wang <ziang.wang@intel.com>
Co-authored-by: Gang Chen <gang.c.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81443
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
IO resource creation utils taking 'from' and 'to' as parameters
use uint16_t for them, where 'to' equals the resource limit plus
1. When a resource is with a limit of 0xFFFF, the value of 'to'
will be clipped to 0x0000 by uint16_t. Fix this problem by use
uint32_t and checks the effective range to make sure it no larger
than UINT16_MAX + 1.
TEST=Build and boot on intel/archercity CRB
TEST=Build on intel/avenuecity CRB
Change-Id: Ie83045683094d6330c1676809f83acf30175cc90
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82192
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
It might be benefical to have utils for domain resource window
creation so that the correct IORESOURCE flags used could be
guaranteed.
TEST=Build and boot on intel/archercity CRB
TEST=Build on intel/avenuecity CRB
Change-Id: I1e90512a48ab002a1c1d5031585ddadaac63673e
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82103
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
<stdarg.h> header is used to define macros for handling variable
argument lists in functions like printf. It does not depend on the string
or memory manipulation functions provided by <string.h>.
So let follow conventions and include only the necessary headers in each
header file.
Change-Id: I07ffc65b7feefb8ec4ab8dd268113f9ed8d24685
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82664
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Both acpi_create_madt_sci_override and acpi_sci_int have special
handling for the ACPI_NO_PCAT_8259 case, but those cases weren't exactly
obvious, so add a comment with the reason for that.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia6dcf59d5ab9226c61e9c4af95a73a07771b71d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82643
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
AOOSTAR R1 is a Chinese NAS based on Intel N100 (Alder Lake N), with
two 3.5" HDD slots, an M.2 NVMe 2280 SSD slot and a single DDR4-3200
SODIMM slot up to 32GB. It also comes with 2x 2.5Gb Intel NICs,
Intel AX200 WiFi + BT and USB-C Alt-DP Power Delivery.
Working:
- DDR4 RAM (tested with Crucial 16GB 3200MHz CL22)
- Automatic FAN control (IT8613E Super I/O)
- M.2 NVME slot
- 2x SATA ports (Issue on 3.5" HDD, see below)
- USB 2.0 ports
- USB 3.0 ports
- USB-C port with Alt-DP and PD
- HDMI / DisplayPort ports
- 2x 2.5Gb NICs
- WiFi + BT
- MicroSD card reader
- ASPM (Unavailable on stock)
- Linux (Arch Linux, kernel 6.8.7-arch1-1) UEFI booting with EDK2
- Windows 10 UEFI booting with EDK2
Broken:
- Power button (OFF->ON broken, ON->OFF works)
- 3.5" SATA HDDs (Detected only after reboot)
Untested:
- Internal audio
- S3
My motivation for doing this port is enabling ASPM, as it makes a
great difference on idle power consumption (from 8.4W to 5W measured
from the wall).
The last remaining annoyance of this port is the power button not
working. I spent a few hours double checking the Super I/O registers but
then I gave up. A workaround for this is to use the "ON after power
loss" feature and reconnect the power cord to turn on the board.
It's not a big problem for a NAS that will stay ON 24/7.
Any hint on the power button or 3.5" HDD issue is welcome.
VBT extracted from vendor UEFI firmware version 1AXFE 0.01 x64
(Build date and time 11/29/2023 10:57:44)
Compiled with FSP GOP video initialization, using IFD descriptor
and ME blob extracted from vendor UEFI firmware (see above).
The board can be flashed externally using a 1.8V adapter, I used a
CH341a modded for 3.3V I/O. Internal flashing works, as flash is
not read/write protected.
Patchset 5: Re-enabled dptf, added default options to Kconfig.
Patchset 7: Configured USB port mapping and overcurrent, USB3.0 works
Patchset 8: Fixed microSD card reader
Patchset 13: Change Super I/O Fan configuration to reduce fan noise
Change-Id: I9414eb742b6b90459e010b038c1994537e9801a5
Signed-off-by: Federico Amedeo Izzo <federico@izzo.pro>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82010
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Adjust setting as recommended by power team.
Add ramstage.c in Makefile.inc to set psys_pl2_watts in
variant_devtree_update().
Also copy CPU power limit values from ovis baseboard.
BUG=b:320410462
BRANCH=firmware-rex-15709.B
TEST=FSP debug emerge-ovis coreboot intelfsp
check overrides setting
[INFO] CPU PsysPL2 = 178 Watts
[INFO] Overriding PsysPL2 (178)
[INFO] Overriding power limits PL1 (mW) (19000,28000) PL2 (mW)
(64000, 64000) PL4 (W) (120)
Change-Id: I9ce3a8f843a87e81d404778aaf250b876b6801eb
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82200
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
The code used to reserve MEMSET_PAE_PGTL_SIZE (20 KiB) for page used
for clearing the memory above 4 GiB that was assumed to be 2 MiB page.
memset_pae() checks only the alignment and not the size of this region,
so no error was reported by it.
In most cases this reserved memory in 2-4 MiB range, and because this
range isn't usually used by coreboot (architectural stuff is located in
lower 1 MiB, coreboot tables and ramstage are close to TOLUM and payload
isn't yet loaded when the broken code is executed), it never caused any
problems.
Change MEMSET_PAE_PGTL_SIZE to MEMSET_PAE_VMEM_SIZE and fix wrong macro
definition to reserve properly sized region.
Change-Id: I0df15b0d1767196fe70be14d94428ccdf8dbd5d3
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82397
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
This patch introduces x86_64 (64-bit) support to the payload, building
upon the existing x86 (32-bit) architecture. Files necessary for 64-bit
compilation are now guarded by the `CONFIG_LP_ARCH_X86_64` Kconfig
option.
BUG=b:242829490
TEST=Able to verify all valid combinations between coreboot and
payload with this patch.
Payload Entry Point Behavior with below code.
+----------------+--------------------+----------------------------+
| LP_ARCH_X86_64 | Payload Entry Mode | Description |
+----------------+--------------------+----------------------------+
| No | 32-bit | Direct protected mode init |
+----------------+--------------------+----------------------------+
| Yes | 32-bit | Protected to long mode |
+----------------+--------------------+----------------------------+
| Yes | 64-bit | Long mode initialization |
+----------------+--------------------+----------------------------+
Change-Id: I69fda47bedf1a14807b1515c4aed6e3a1d5b8585
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81968
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
get_cxl_mode() is the interface for CXL mode config check used by
SoC codes. It could be implemented by mechanisms outside of the
SoC codes, e.g. board codes or OCP VPD driver.
Move the interface declaration out of soc/util.h to a dedicated
header, a.k.a., soc/config.h, so that the implementation codes do
not need to include soc/util.h where there are lots of irrelevant
definitions. Future SoC config check interfaces could be added
to soc/config.h as well.
The default weak implementation is moved out of util.c to
config.c as well.
TEST=Build and boot on intel/archercity CRB
Change-Id: Ia0302b0d3fd93c49e1d6f64e8159f59d50f33e20
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82293
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
While the SoC-level defaults for VGA_BIOS_ID are the expected correctly
remapped PCI VID/PID of the GPU which matches the PCI VID/DID inside the
VBIOS file, some mainboards override the VGA_BIOS_ID setting to the
non-remapped PCI ID. This resulted in coreboot not finding the VBIOS
file after commit 42f0396a10 ("device/pci_rom: rework PCI ID remapping
in pci_rom_probe"). The proper solution would be to not override this
SoC-level config in neither the mainboard code nor some external config
file. This however requires adding/using some mechanism to tell SeaBIOS
which VBIOS image to use for the GPU device. Once this is implemented,
the SoC default for VGA_BIOS_ID shouldn't be overridden any more and
this patch can be reverted again.
This sort-of reverts parts of commit 42f0396a10 ("device/pci_rom:
rework PCI ID remapping in pci_rom_probe"), but it still tries to find
the VBIOS image with the expected remapped PCI ID and only adds trying
the non-remapped PCI ID as a fallback when the file with the remapped
PCI ID doesn't exist and prints a notice in that case. Before the patch
referenced above, using the correct remapped PCI VID/DID resulted in a
warning about the CBFS file with the non-remapped name not being found,
but first checking the remapped version solves that problem.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7cd8e2036250f4ca2239b04cd070bbf0778b13aa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
The pre-release notes never capture everything, so we need to do an
update to finalize them after the release is tagged.
This captures on additional SoC added right before the release and
updates the statistics.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Id3efcd15597e4fee0bdbca76e474974ae32d3263
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82613
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Integrate head.S directly into libc and remove all instances of head.o.
* Drop 'separate class' entry for head.S.
* Drop special treament for head.o inside lpgcc.
* Change the .text in `x86/head.S` to `.section .text._entry`.
* Drop arch/mock/head.c, initially added as a dummy file.
Change-Id: I156d781908fcc38d455bbf9f2c29e5ab95c7775a
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82478
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This moves the multiboot header into its own include file, simplifying
head.S and making it easier to include/exclude the multiboot header
based on config options.
BUG=b:242829490
TEST=Able to build and boot google/rex.
Change-Id: I59a22dfe36044b4dd64a5b028a134be7a7d02a48
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82533
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch tries to simplify the baseboard/variant GPIO programming
for Google/Trulo. The idea is to let each variant maintain
its own complete GPIO PAD configuration table instead of having a
back-and-forth call between baseboard and variants.
With this patch coreboot performing GPIO programming is now much
simpler where the common code block calls into respective variants
and gets the gpio table prior to the pad configuration.
BUG=b:334826281 ([TWL] Decouple GPIO from baseboard to variant)
TEST=Able to build google/orisa.
Change-Id: I4ab88ac094a45c608cd894feb5eeec24b867527a
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82629
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
* Introduce a null check before calling `gpio_padbased_override`
in `variant_configure_pads`.
* This prevents potential errors in cases where the
`variant_gpio_override_table` function returns a null pointer,
indicating that there are no override pads to configure.
BUG=b:334826281
TEST=Able to avoid hang incase there is no GPIO override.
Change-Id: I733210a08091b37eda6e6b0d6924aafd5e7e6280
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82628
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The CHECK_REV_IN_OPROM_NAME Kconfig option was introduced to solve the
problem of the PCI VID/DID combination of the Picasso iGPU not being
sufficient information to know which VGA BIOS file to run, so a new
function that additionally checks the PCI revision of that device was
introduced. Later it turned out that there might be a case where even
that isn't sufficient, so the soc_is_raven2() function is used in the
remap function to always use the correct VBIOS file.
Picasso is the only SoC that selected the CHECK_REV_IN_OPROM_NAME
Kconfig option, so all other SoCs are unaffected by this change.
Now that we use the VBIOS images with only the PCI VID and DID in the
CBFS file name for Picasso, SeaBIOS will find the VBIOS with the same ID
as the iGPU in CBFS and we don't need the workaround to add a third
VBIOS image via VGA_BIOS_DGPU_* that has the name that SeaBIOS expects.
This will result in SeaBIOS now running the VBIOS that has the same PCI
VID/DID as the hardware which will be the wrong one in the RV2 silicon
showing the PCO silicon PCI VID/DID, but that was also the case with the
VGA_BIOS_DGPU_* workaround where the board's Kconfig just selected one
of the two possible images during build time and hoped that it was the
correct one for that actual hardware. The only board where this patch
might cause a regression compared to the old behavior is the AMD Cereme
reference board with Pollock APU, but I'm not even sure if any coreboot
developer still has one of those boards, so I'm willing to accept that.
To properly solve the problem with SeaBIOS using the correct VBIOS file
in all cases, we'd need to generate that info during coreboot runtime
and somehow pass it to SeaBIOS, but that's out of scope for this patch.
TEST=On Mandolin with PCO silicon, the display output in both SeaBIOS
and Ubuntu still works. Booting Windows 10 via the pre-built EDK2
payload that I'm using also resulted in the display output working.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia6de533c536044698d85404427719b8f534870fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82598
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Type-C kernel driver no longer programs the AP mux, as of
https://review.coreboot.org/c/coreboot/+/82077. So remove device
references to the TCSS Mux control device from the Type-C port driver.
This eliminates the following kernel error which was observed as a
result of the kernel trying to program muxes it no longer has control
over:
[ 4.618600] cros-ec-typec GOOG0014:00: Failed to get mux info for port: 0, err = -95
[ 4.618608] cros-ec-typec GOOG0014:00: Configure muxes failed, err = -95
BUG=b:341331428
TEST=Run system reboot; configure mux kernel errors no longer seen.
Change-Id: I93e498b12b109c0e649a23a4a49868976a9ee06b
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82599
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
1) Add all changes needed for early graphics
2) select MAINBOARD_USE_EARLY_LIBGFXINIT for nissa
The InnoLux (N156HCN-EBA C7) panel is used for the device tree.
BUG=b:296433986
TEST=On-screen text message seen during MRC training on Craask
Logs:
[NOTE ] MRC: no data in 'RW_MRC_CACHE'
[SPEW ] bootmode is set to: 0
[0.171409] DP PHY mode status not complete
[0.175509] DP PHY mode status not complete
[0.179799] DP PHY mode status not complete
[0.184087] DP PHY mode status not complete
[0.188376] DP PHY mode status not complete
[0.192665] DP PHY mode status not complete
[0.196954] DP PHY mode status not complete
[0.201243] DP PHY mode status not complete
[0.205532] DP PHY mode status not complete
[0.209821] DP PHY mode status not complete
[0.214110] DP PHY mode status not complete
[0.218397] DP PHY mode status not complete
[INFO ] Informing user on-display of memory training.
Change-Id: I33cfc5d1f8c25c344e598befd21c50a78a65275a
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78932
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This board is the CWWK variant based upon Alder Lake with 4 2.5 GbE
ports, similar boards are available in other port configurations. As a
low cost, relatively high performance board with 4 NICs, it is well
suited for networking or 'homelab' tasks.
CPU: Intel N100 or N350
Memory: DDR5-4800 SODIMM (max 16 GB)
NIC: 4x Intel I226-V 2.5 GbE
Expansion:
- M.2 2230 E key
- M.2 2280 M key
- USB 2.0 header
- Fan header
External ports:
- DC power
- 4x Ethernet
- Display Port
- HDMI
- 4x USB 2.0
- Micro SD
Working:
- Boots Debian 12 with SeaBIOS and EDK II payloads
- Serial port
- External USB ports
- DisplayPort / HDMI
- 4x Intel I226 2.5 GbE NICs
- M.2 ports
- Micro SD slot
- ACPI S3
Not working / not tested:
- Fan (ITE IT8613E)
- Audio
- S0ix
- Internal USB ports
VBT extracted from vendor UEFI firmware version ADLN 0.01 x64
(04/04/2023 11:42:38).
Change-Id: Ice9174d95c10afc6a22ddd15fb3be4fa38d329be
Signed-off-by: Brandon Weeks <me@brandonweeks.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81595
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Some proximity domain info are type specifics, e.g. base/size/dev
are effective for PD_TYPE_GENERIC_INITIATOR, but not for
PD_TYPE_PROCESSOR. Dump info per their type.
TEST=Build and boot on intel/archercity
Change-Id: I7e722a0577bba954efba3e91cc152c758c001d68
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82292
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Move proximity domain setting up to ahead of attach_iio_stacks()
so that proximity domain info could be ready before
attach_iio_stacks()/create_xeonsp_domains().
For example in SPR, is_iio_cxl_stack_res() refers to proximity
domain info, and it will be called in create_xeonsp_domains().
TEST=Build and boot on intel/archercity
No significant boot log difference except for proximity domain
dump info display are moved ahead (with correct contents).
Change-Id: I594f0ec0c23e3b62c3bdd917ebf6e45be6e4069e
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82267
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use the `AZALIA_PIN_CFG_NC(0)` macro instead of `0x411111f0` and tidy up
some comments (align them and be consistent with capitalisation).
Tested with BUILD_TIMELESS=1, prodrive/hermes remains identical.
Change-Id: I1ff1197b1309fc0e5b978d6d36867a3f1a68c67c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82396
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
In the FSP case, the DDI descriptors aren't part of the devicetree and
are instead retrieved in romstage by calling the mainboard's
mainboard_get_dxio_ddi_descriptors function which allows updating the
descriptors during romstage where the devicetree is static. In the
openSIL case, the DDI configuration is first needed in ramstage, so we
can put this info into the devicetree and update it if needed in
ramstage.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3de12ff6af42e38751a3016efa313613677fa87a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82580
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Remove the TODO to update the chipset devicetree for Phoenix, since this
has already been done.
When re-checking the chipset devicetree, I found conflicting information
about the existence of the PCI bridge to an external PCIe port on bus 0
device 1 function 5, but after looking into this, I'm reasonably certain
that it either doesn't exist or at least wouldn't be usable, so I won't
add that one to the chipset devicetree.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8f0e1540ed45408e86186253d3982a7ba0065ac6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
This reverts commit f867c9c547.
The new verb table breaks external mic detection on brox.
Revert and use old verb tables instead.
BUG=b:330433089
BRANCH=main
TEST=Verified headset on Brox
When connected to audiojack in power_save state of legacy hda driver,
headset is detected and audio is resumed.
Change-Id: I0d8c092de6166b2c62f5ecc3deaf4960128e6106
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82273
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This adds some helper functions for FDT, since more and more mainboards
seem to need FDT nowadays. For example our QEMU boards need it in order
to know how much RAM is available. Also all RISC-V boards in our tree
need FDT.
This also adds some tests in order to test said functions.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I2fb1d93c5b3e1cb2f7d9584db52bbce3767b63d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81081
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Debian sid is too unstable at this point, and frequently ends up having
issues that cause the coreboot-sdk docker image to fail to build. Using
stable also better reflects what users will typically be running.
Also remove the parameters to quiet the apt-get install command so that
if something does break, we can see what happened more easily.
Fixes bug 536
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I41b6464b024df89c114db2cdb9367c0526eb0297
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82411
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit renames the variable _ARCH to _ARCHDIR in the libpayload
build script (lpgcc) to align with the naming convention of other
variables used in this file.
This change improves code readability and maintainability.
Change-Id: Iea4af68e49ab1cd7ec8156a14f8215244e9c0622
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82479
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The cr50.c file currently prints "cr50" in debug messages no
matter the system is using Cr50 or Ti50. This can be confusing
for developers.
This patch replaces "cr50" with "GSC" in debug messages. Using
"GSC" makes the messages more clear and easier to search via
`grep`.
BUG=none
TEST=Build and test on karis
Change-Id: I21f66cf8b608ca4e4dc82d7a55a851ec996c8bb3
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82420
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Beechnut City CRB is the 2 socket reference board for 6th Gen Xeon-SP
SP SoCs (Granite Rapids SP and Sierra Forest SP).
This patch initially sets the code set up as a compilation target with
GNR N-1 FSP, and with basic feature supports (Integrated IO Controller
(IIO) configuration, BMC, UART, HPET).
TEST=Build on intel/beechnutcity CRB
Change-Id: I3f6a0fb97b62baadb438fb9f11fdd78fccb3f89a
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Co-authored-by: Gang Chen <gang.c.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81322
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Avenue City CRB is the 2 socket reference board for 6th Gen Xeon-SP
AP SoCs (Granite Rapids AP and Sierra Forest AP).
This patch initially sets the code set up as a compilation target
with GNR N-1 FSP, and with basic feature supports (Integrated IO
Controller (IIO) configuration, BMC, UART, HPET).
TEST=Build on intel/avenuecity CRB
Change-Id: I64fdd5388aadf7732f6d3daa600c1455d3672a46
Signed-off-by: Gang Chen <gang.c.chen@intel.com>
Co-authored-by: Shuo Liu <shuo.liu@intel.com>
Co-authored-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81319
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
When support for the dictation key was added in commit f2782b8328
(acpigen_ps2_keybd: Add support for dictation key), I had failed to
include this portion of the change in that commit. The top row key of
`TK_DICTATE` needs to be converted to the ps2_action_key. This commit
simply adds that mapping so that it can be translated.
BUG=b:333101631
TEST=Flash DUT that emits a scancode for a dictation key, verify that it
is mapped to KEY_DICTATE in the Linux kernel using `evtest`.
Change-Id: I1be8c0a96931cca36e6bbbfa0be7d36c4cd93768
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82274
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch enables the Versatile Processing Unit (VPU) by default for
Rex/Ovis baseboard. VPU is a dedicated AI engine that is included in
the 14th generation "Meteor Lake" Core processors.
The VPU is designed to efficiently run AI models directly on the
system on chip (SoC). There is no power regression observed while
keeping the VPU default enabled to run AI models natively hence, this
patch enables the VPU by default.
BUG=b:332488817
TEST=Able to see VPU PCI device in lspci (0:11:0) list after booting
google/screebo to OS.
Change-Id: I8b3521c8ec613b002f971eaf9d346927fe8cd656
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82422
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
There is no direct way to override CPU default power_limits for
different SKUs.
This CL add structure variant_get_soc_power_limit_config() for
variants to define and configure the values of soc_power_limits_config
for current CPU SKU.
Variants can override these values i.e. pl1, pl2, psyspl2
in variant_devtree_update().
BUG=b:320410462
BRANCH=firmware-rex-15709.B
TEST=FSP debug emerge-ovis coreboot intelfsp
check overrides setting
Change-Id: Ib60fa4e3fc502d0aeb0c94ad46ba5a55b4dd027c
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82199
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This function had roughly the same use (except PAT) as part of
memset_pae(), however the latter is able to make use of PAE and map
physical memory located above 4 GB. Remove paging_identity_map_addr()
to avoid semi-duplicated code.
The function has been unused since CB:26745.
Change-Id: I7a4ebd84a6f5d222c3b2c6c6e3d26d6464cf01b8
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82248
Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Upstream commit 11ad164bce (UefiPayloadPkg: Make UPL build script arch
agnostic, 2024-02-22) changes the build script's behavior to not assume
the arch. Without defining BUILD_ARCH, the build script will not
function properly and results in the payload failing to build.
Both UefiPayload and Universal Payload can only be built in X64.
Change-Id: Icd942d0c15a99231d09f9cbdc5eb48333b6aa6e5
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Phoenix 2 has less PCIe lanes than Phoenix, so some of the lane end
numbers need to be adjusted to take that into account. When the Kconfig
options WLAN01 or WWAN01 are set, either the WLAN or the WWAN card uses
both PICe lanes that are available for those two devices, so the MPIO
descriptor information the devicetree needs to be updated accordingly
and the bridge to the PCIe port that doesn't have any lane left needs to
be disabled. Two other PCIe devices will be disabled when the
corresponding Kconfig options ENABLE_EVAL_CARD and DISABLE_DT_M2 have
the value that results in the device being disabled via some GPIO driven
by the EC. Since the code is specific to the openSIL case, only include
it in the build in the CONFIG_BOARD_AMD_BIRMAN_PHOENIX_OPENSIL case.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I23c14cc03980ea1e39f7e5aec551b975c237e487
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82106
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Add the stub MPIO chips that contain the PCIe engine configuration for
the external PCIe interfaces to the devicetree. Birman's
port_descriptors_phoenix.c was used as a reference. The static
configuration in the devicetree assumes that the default WLAN0_WWAN0 is
selected; for the other cases we'll still need to fix up things
accordingly in the mutable devicetree. The WLAN01 and WWAN01 cases still
need to be handled in a follow-up patch. Since openSIL currently doesn't
use the info from the gpio_group struct element, but deasserts both PCIe
reset pins GPIO 26 and 27, the gpio_group isn't specified in the chip
configuration in the devicetree.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icabe60322d46c1195284dd77ec39f9d143e3d2cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81101
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
These are the final release notes for the 24.05 release before the tree
is marked with a tag, completing the release. We will update the notes
with final numbers and anything else after the release is tagged.
The 24.05 release will be announced a week later, barring any issues
that require an updated release tag.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I00be0127351f8641116b4bc523c266628b084e69
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82407
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
coreboot GNR (Granite Rapids) is a FSP 2.4 based, no-PCH, single
IO-APIC Xeon-SP platform. The same set of codes is also used
for SRF (Sierra Forest) SoC.
This patch initially sets the code set up as a build target with
Granite Rapids N-1 FSP (src/vc/intel/fsp/fsp2_0/graniterapids).
1. All register definitions are forked from SPR (Sapphire Rapids)
and EBG (Emmitsburg PCH)'s codes are reused.
2. src/soc/intel/xeon_sp/chip_gen6.c is newly added as chip
common codes for 6th Gen Xeon-SP SoC (Granite Rapids) and later.
Change-Id: I3084e1b5abf25d8d9504bebeaed2a15b916ed56b
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Co-authored-by: Gang Chen <gang.c.chen@intel.com>
Co-authored-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81316
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Add PCI ID for RPL tracehub and update the PCI ID in the
pci_device_ids[] in tracehub.c.
Reference:
Raptor Lake External Design Specification Volume 1 (640555)
BUG=None
TEST=Verified on brox
Change-Id: I5d5c6c8ff44bcb5a7bbbd3e27a1577c169ecd6a9
Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Yes, the DSDT revision is the OEM revision. But most certainly not that
of the board being ported. Because no one seems to care about the value
(newer boards inexplicably use lower values even though this represents
a date in 0xYYYYMMDD format), simply drop the incorrect comment. Should
save a bit of effort when reviewing mainboard ports: no longer will one
have to ask authors to drop the comment.
Change-Id: I9c425573e4fcb0f670a780e7821e815eadc8a2aa
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This patch removes all instances of the `protected_mode_jump` API and
its associated header file.
The API is no longer used by any code within the tree.
BUG=b:332759882
TEST=Built and booted 64-bit coreboot with 32-bit payload successfully.
Change-Id: I3eb31b09c92512338ccc540f60289960bd6bf439
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82372
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The payload execution process has been updated to utilize
protected_mode_call_1arg in order to guarantee proper handling of
function parameters.
The previous use of protected_mode_jump with a "jmp" instruction did
not allow for proper stack setup for argument passing, as the calling
convention was not aligned with the System V ABI calling convention.
This patch ensures that calling into the libpayload entry point using
protected mode is now aligned with the System V ABI calling convention.
This resolves an issue where retrieving the "pointer to coreboot tables"
from within the libpayload entry point was failing due to incorrect
argument passing.
BUG=b:332759882
TEST=Built and booted 64-bit coreboot with 32-bit payload successfully.
Change-Id: Ibd522544ad1e9deed6a11015b0c0e95265bda8eb
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82294
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Support Memory of Micron MT53E512M32D1NP-046 WT:B and Hynix
H54G46CYRBX267 in mem_parts_used list, and generate SPD ID for these
parts.
DRAM Part Name ID to assign
MT53E512M32D1NP-046 WT:B 0 (0000)
H54G46CYRBX267 0 (0000)
BUG=b:337173071
BRANCH=firmware-dedede-13606.B
TEST=Run command "go run \
./util/spd_tools/src/part_id_gen/part_id_gen.go \
JSL lp4x src/mainboard/google/dedede/variants/pirika/memory/ \
src/mainboard/google/dedede/variants/pirika/memory/\
mem_parts_used.txt"
Change-Id: I9b1a2a622d0ca1298671b1da58beacc1b4244769
Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82094
Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Add a nvram option for front audio panel type.
If it is set to AC97, reprogram front line out and microphone
pins to match vendor firmware under same configuration.
TEST=On asus/p8z77-m housed in an AOpen H340D case with an AC97
front audio panel, front panel line out port is now available as
headphone port in Fedora 39 with this patch applied and option
set correctly. And it works. Without the patch (or with this option
set to HD Audio), front audio ports are completely inoperable.
Change-Id: I39ccf066d87c5744a697599861719182768e0728
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
This function isn't used anywhere. It probably wouldn't work with
current coreboot anyway, as it identity mapped lower 2GB of RAM, while
ramstage is run from CBMEM, which is usually just below top of memory.
It was last used in K8 code that is long gone.
Change-Id: I97e2830f381181d7f21ab5f6d4c544066c15b08c
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Details:
- Add support for new Lunar Lake MCH ID 0x6410
- Add new CPU id 0xb06d1
Reference:
Lunar Lake External Design Specification Volume 1 (734362)
TEST=Build, boot the system and verfiy MCH-ID prints in bootblock stage.
Below prints verified on Lunar Lake RVP board (lnlrvp).
[DEBUG] MCH: device id 6410 (rev 02) is LunarLake M
Change-Id: I976d7f269485633d835d204afa224736d71baaa8
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81847
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Previous CL misspelling VR domain to IA not GT which cause
FVM Itrip(GT) not set correctly.
This CL corrects it to VR_DOMIAN_GT and confirm FVM Itrip(GT)
has set to 54.
BUG=b:320410462
BRANCH=firmware-rex-15709.B
TEST= FSP debug emerge-ovis coreboot intel-mtlfsp
check overrides setting
IccLimit[1] = 216 ( 1/4 A)
Change-Id: I99df053869aa11b7c82aa0b7f7ec0acf73467a76
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82268
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
The chip drivers in the devicetree use the path where the corresponding
chip.h file resides both to include this chip.h file in the static.c
generated by util/sconfig from the devicetree and also for the names of
the chip config and chip ops struct. To be able to build a SoC using
either the MPIO chip driver from the openSIL stub or from the actual
openSIL glue code without needing different devicetree files for the
different cases, introduce a common MPIO chip.h file that then includes
the correct MPIO header file. The chip config and ops structures also
need to be renamed to take this change into account.
Thanks to Matt for pointing out how to make the path to the actual MPIO
chip.h file configurable via a Kconfig setting. This allows overriding
this path from site-local without the need to have any reference to
site-local in the upstream code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iead97d1727569ec0d23a2b9c4fd96daff4bebcf6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82262
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Also switch configs to use combo v1/v2 FSP
The reason for this change is to simplify configuration - instead of
multiple targets for VP4630 and VP4650 or VP4670, it's now possible to
have one target covering all VP46x0.
Change-Id: I1a6f6e873e4ec35b9777dc17c0495151348d1d88
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81963
Reviewed-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This commit overrides the EFIAPI macro definition when using FSP on
x86_64 to ensure the correct calling convention is used.
On i386, there is no side-effect since the C calling convention used
by coreboot and FSP are the same. However, on x86_64, FSP/UEFI uses
the Microsoft x64 calling convention while coreboot uses the System
V AMD64 ABI.
This change resolves this incompatibility by setting EFIAPI to
attribute((ms_abi)) on x86_64 when using FSP.
TEST=Able to build google/rex0 in 32-bit and 64-bit mode.
Change-Id: Ifae910be66d550af04cce5136d186a7e9dd085b3
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82266
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
TF-A migrates the default choice of linker to GCC in order to enable
LTO. Change BL31_LDFLAGS from `--emit-relocs` to '-Wl,--emit-relocs', so
that GCC is able to pass `--emit-relocs` to the linker.
[1]: https://review.trustedfirmware.org/c/26703
BUG=b:338420310
TEST=emerge-geralt coreboot
TEST=./util/abuild/abuild -t google/geralt -b geralt -a
TEST=./util/abuild/abuild -t google/oak -b elm -a
Change-Id: I65b96aaa052138592a0f57230e1140a1bb2f07ac
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82189
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Updating from commit id 17bef2248:
2024-02-05 23:33:50 +0100 - (Merge "feat(fvp): delegate FFH RAS handling to SP" into integration)
to commit id 48f1bc9f5:
2024-05-02 10:13:54 +0200 - (Merge "feat(zynqmp): remove unused pm_get_proc_by_node()" into integration)
This brings in 535 new commits.
Change-Id: I562dd4d1e1ddc187341ae5856d47eeedfca85619
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82188
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
This change is for upcoming arm-trusted uprev commit.
TF-A refactors the toolchain detection in [1][2]. After that `AR`,
`CC`, `LD` and other toolchain variables have precedence over
`CROSS_COMPILE`.
Since ChromeOS build system also sets those toolchain variables when
building coreboot, it results that TF-A uses CrOS GCC instead of
coreboot SDK. It needs to unset those variables in order to make
`CROSS_COMPILE` effective.
TF-A upstream changes the default linker from BFD to GCC in [3].
Therefore, temporarily overriding LD as $(LD_arm64} to fix the below
build error.
aarch64-elf-gcc: error: unrecognized command-line option '--emit-relocs'
In addition, TF-A wrapped LD with single quotes to solve Windows path
issue[4]. On MT8173 platform, `--fix-cortex-a53-843419` is appended to
$(LD_arm64} for ERRATA_A53_843419. It results in the below build error.
/bin/sh: 1: --fix-cortex-a53-843419: not found
Since `--fix-cortex-a53-843419` is never passed to TF-A, simply extract
the LD command from $(LD_arm64) by $(word 1, $(LD_arm64)).
[1]: https://review.trustedfirmware.org/c/24921
[2]: https://review.trustedfirmware.org/c/25333
[3]: https://review.trustedfirmware.org/c/26703
[4]: https://review.trustedfirmware.org/c/26737
BUG=b:338420310
TEST=emerge-geralt coreboot
TEST=./util/abuild/abuild -t google/geralt -b geralt -a -x
TEST=./util/abuild/abuild -t google/oak -b elm -a -x
TEST=./util/abuild/abuild -t google/cherry -x -a
Change-Id: Ieac9f96e81e574b87e20cd2df335c36abcb8bb5c
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Eric Lai <ericllai@google.com>
In order to support SVP Feature, EMI-MPU has to give MFG permissions
to allow MFG to access secure buffer by secure read and write.
Currently MFG is in domain 0, which include many other masters.
Move MFG to domain 6.
Set MFG remap, so that MFG can switch to protect mode by MFG register.
Change MFG permission from NO_PROTECTION to SEC_RW_ONLY for domain 0,
so that only AP in secure mode can access MFG_S_S-2 and MFG_S_S-5.
BUG=b:313855815
TEST=emerge-geralt coreboot
Change-Id: Ic6fb7d85bf9d4d92946a045a274b274abc440e1d
Signed-off-by: Fei Yan <fei.yan@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82076
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Update the pad reset config for WLAN Interrupt from PLTRST to DEEP
so that it can still act as a wake source during S3 suspend.
BUG=b:336398012
TEST=Build Brox BIOS image and boot to OS. Suspend to S0ix & S3 and
wakeup successfully using Wake on WLAN.
268 | 2024-05-07 13:56:44-0700 | S0ix Enter
269 | 2024-05-07 13:57:07-0700 | S0ix Exit
270 | 2024-05-07 13:57:07-0700 | Wake Source | GPE # | 3
271 | 2024-05-07 13:59:01-0700 | ACPI Enter | S3
273 | 2024-05-07 13:59:26-0700 | Wake Source | PME - WIFI | 0
274 | 2024-05-07 13:59:26-0700 | ACPI Wake | S3
275 | 2024-05-07 13:59:26-0700 | Wake Source | GPE # | 3
Change-Id: Ie0d6e6c8fefdd081e252ea99d6e3c559a5330b0e
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82234
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If $BOARD is not all lowercase, then certain subfunctions of the
script will fail due to case-sensitive comparisons therein. To avoid
this, since all matched strings are fully lowercase, set $BOARD
to lowercase.
TEST: './crosfirmware.sh {akemi/Akemi/AKEMI}' all succeed.
Change-Id: I8ecb613a8d9384e2cccaff5183470e2e9956d0a2
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82232
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
That's an ATX mainboard with a LGA1150 socket and four DDR3 DIMM slots.
Porting was done using autoport and then doing a bunch of manual edits.
This board has two socketed DIP-8 SPI flash chips and a physical switch
to choose which one should the system boot from. As long as one of them
contains a bootable firmware image, it is possible to reflash the other
chip using the internal programmer by flipping the switch after booting
to OS. Even if one somehow manages to flash unbootable firmware to both
chips, they are socketed: one can carefully remove them from the socket
and reflash them externally, which is a relatively safe procedure (when
compared to in-circuit flashing, especially if the board isn't designed
to safely be flashed in-circuit). In short, the board is hard to brick.
Haswell MRC.bin cannot be used because it lacks support for the Z97 PCH
found on this mainboard. Broadwell MRC.bin only works with Haswell CPUs
so far, as raminit fails on Broadwell CPUs for an unknown reason. Maybe
it's something about RcvEn, but it's unlikely it can easily be fixed.
Working:
- All four DIMM slots
- Broadwell MRC.bin for raminit purposes
- Serial port to emit spam
- POST code display
- S3 suspend/resume
- All rear USB 3.0 ports
- Internal USB 2.0 port
- Audio output (green jack)
- Integrated graphics (libgfxinit)
- HDMI
- VBT
- Intel GbE (I218-V PHY and PCH MAC)
- Realtek RTL8111E GbE
- At least one SATA port
- M2_1 slot (Gen3 x4, bifurcated from CPU)
- Flashing internally with flashrom
- SeaBIOS (current version) to boot Arch Linux
- NCT6791D Super I/O software-based fan control
tested using `sensors` and `pwmconfig`, all 6
fan tachometers and 5 PWM outputs work fine.
Untested for now (i.e. should work, will eventually test):
- DVI-I, DisplayPort
- EHCI debug
- Front USB 2.0 and 3.0 ports
- The other audio jacks (as well as SPDIF)
- The other PCIe and M.2 ports
- Non-Linux OSes
- PS/2 combo port (can only test with a keyboard)
Untestable (i.e. cannot test due to unavailable hardware):
- Thunderbolt AIC (Add-In Card) support
Not working:
- Broadwell CPUs, they require more magic to work (working on it).
- Booting from ASM1062 SATA ports with SeaBIOS. Other payloads were
not tested. It seems that the problem is with the controllers.
- Super I/O automatic fan control: not yet implemented in coreboot.
To control fans, use software fan control methods in the meantime.
- Acer B247Y board driving a FHD panel of a Samsung S24E650 monitor,
connected to the board's HDMI output says "Unsupported resolution"
after libgfxinit configured the iGPU outputs in linear framebuffer
mode. HDMI output works fine after Linux's i915 driver takes over.
Not sure if it's specific to the monitor: the HDMI cable is beaten
up, and it is hard to replace (need to relocate the logic board so
that the ports are accessible).
Change-Id: If1d22547725e59f435de36b973e1bf4f334269a9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68188
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Máté Kukri <kukri.mate@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Define a new timestamp to identify the completion of Auxiliary Firmware
Sync. Without that, it gets accounted into a different timestamp ID in a
misleading way.
BUG=None
TEST=Build Brox BIOS image and boot to OS. Confirm the timestamp is
recorded in cbmem.
Change-Id: Icd01c68a5848e2aed7bbdcc794987bc780e78dab
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82230
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Shelley Chen <shchen@google.com>
The original code uses TRE0-TRE3 register to determine whether or not
the TBT controller exists. However, there is a remap in fsp could confuse
the TRPx._STA.
Ex:
Disable TBT controller 0 on b:0 d:7 f:0
Enable TBT controller 1 on b:0 d:7 f:1
The FSP will do the remap and after the remap:
TBT controller 1 is on b:0 d:7 f:0
TBT controller 0 is on b:0 d:7 f:1
This is becuase func 0 must exist per pci spec.
However, the TRE0-TRE3 will not be remapped so that the ACPI
TRPx._STA method could be confused.
In such scenario, TRP0._STA will return 0x0, TRP1._STA will return
0xf which is wrong because TBT controller 1 is now at b:0 d:7 f:0
TEST=tested on rex and _TRPx._STA returns correctly. TBT function OK
Change-Id: I54f2ea99cd1ec73dd0b71a6ba738aa927b0ae80f
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81842
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
The TBT PCIe devicetree settings are not remapped properly when
TBT PCIe port 0 is disabled.
This code refer SHA:58bc5d937 to remap the PCIe devtree settings
properly in case of TBT PCIe port0 is disabled,
TEST=Tested on screebo and found "Remapping PCIe Root Port #2 msg"
showed up in coreboot log
Change-Id: I7c7549ddf8ccdd67d7af7c69f51a84614cff9a03
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81841
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Rename different spd_raw_data[] for DDR3 and DDR4.
This is to solve the conflict when we include both "ddr3.h" and ddr4.h"
for example here: src/device/dram/spd.c.
Otherwise, it won't compile as DDR3 and DDR4 have different
spd_raw_data[] size.
Change-Id: I46597fe82790410fbb53d60e04b7fdffb7b0094a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82171
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
When microcode is not found, intel_microcode_find() will output warning
and skip the update. Remove the duplicated warning in CPU codes.
TEST=Build and boot on intel/archercity CRB
Change-Id: I0264edc01e90186a7b77d57f9c147d3b73747437
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82194
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Update a simple algorithm to cover some basic case for proximity
domain distance handling. In the same time, the local variable
usage of fill_pds() is optimized.
TEST=Build and boot on intel/archercity CRB
ACPI SRAT, SLIT and DMAR (Remapping Hardware Static Affinity) are
generated correctly for 2S system.
Change-Id: I2b666dc2a140d1bb1fdff9bc7b835d5cf5b4bbc5
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Co-authored-by: Ziang Wang <ziang.wang@intel.com>
Co-authored-by: Gang Chen <gang.c.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81442
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add data.vbt files for bujia supported by brask recovery images.
Select INTEL_GMA_HAVE_VBT for bujia which currently have a VBT file.
changes:
1. "integrated DisplayPort with HDMI/DVI compatible"
-> "Integrated HDMI/DVI".
2. turn the AUX off.
BUG=b:327549688
TEST=build/boot various brya variants
Change-Id: Id56461708250eaedd288ddbf788d686153df0b96
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81553
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Brox uses PDC<->PMC direct connection for USBC mux configuration. Select
SOC_INTEL_TCSS_USE_PDC_PMC_USBC_MUX_CONFIGURATION to enable it. This
patch also adds additional dependency on ENABLE_TCSS_USB_DETECTION to be
selected only when PDC<->PMC direct connection and CHROMEOS is not used.
BUG=b:332383540
TEST=USB3 plugged during G3, is detected after system boots from G3.
Cq-Depend: chromium:5484387
Cq-Depend: chrome-internal:7106592
Change-Id: I0f62943f87d8fb6eb494c0aca3ef08c33cd05ffd
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Introduce a new Kconfig to enable PD controller to PMC mux
configuration. Selecting this config enables direct communication from
PDC to PMC. TCSS_HAS_USBC_OPS enables USB-C operations via the EC. When
SOC_INTEL_TCSS_USE_PDC_PMC_USBC_MUX_CONFIGURATION is selected, disable
TCSS_HAS_USBC_OPS to avoid sending PMC commands from AP/EC.
BUG=b:332383540
TEST=USB3 plugged during G3, is detected after system boots from G3.
Cq-Depend: chromium:5484387
Cq-Depend: chrome-internal:7106592
Change-Id: Ieeb503393418cdad43384be39ac49c93ba91e4db
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82077
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For Mithrax and Felwinter, port C1 is on the left side and port C2 is on
the right side. Correct the values accordingly.
The board schematics was mirrored, so had to obtain an actual machine and physically check the correct ports.
BUG=b:321051330
TEST=emerge-${BOARD} coreboot then check ACPI table on DUT
Change-Id: I977c3b4081987592a1d46529eb848a07a6c4cb47
Signed-off-by: Won Chung <wonchung@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81363
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Emilie Roberts <hadrosaur@google.com>
Within ec_acpi.c, USB-C ports are iterated to be matched with
corresponding mux. The iteration happens from 0 to the number of USB-C
ports. Given iteration index i, the port with PLD group_token of (i+1)
is matched with mux_conn[i].
Mithrax and Felwinter devicetree matches conn1 to mux_conn[1] and conn2
to mux_conn[0]. However, conn1 is for usbX_port2 which has group_token
of 1 and conn2 is for usbX_port3 which has group_token of 2. Thus,
follow the convention to add conn1 to mux_conn[0] and conn2 to
mux_conn[1].
Otherwise, the kernel subsystem linking between Type C connector and USB
mux will be swapped.
BUG=b:329657774 b:121287022 b:321051330 b:204230406
TEST=emerge-${BOARD} coreboot then check ACPI table on DUT.
TEST=Manually check that usb-role-switches are mapped to the correct
port.
Attach USB 3 A to C cable from development machine to left port of
DUT.
Attach nothing to right-hand port.
usbpd lines are workaround for devices without firmware patch to
connect superspeed lines.
ectool usbpd 0 none
ectool usbpd 0 usb
ectool usbpd 1 none
ectool usbpd 1 usb
echo host > /sys/class/typec/port0/usb-role-switch/role (should
succeed)
echo host > /sys/class/typec/port1/usb-role-switch/role (should fail
as no cable attached)
Change-Id: I349682a6fe3fe4848e4e86d9c446530a31b35875
Signed-off-by: Won Chung <wonchung@google.com>, Emilie Roberts <hadrosaur@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81354
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Emilie Roberts <hadrosaur@google.com>
Copy ACPI _PLD values from USB ports to corresponding USB muxes so that
the kernel can create symlinks between Type C connectors and
corresponding USB muxes. This symlink will be used to let userspace be
able to modify the USB role without knowing ACPI topology for the
device.
BUG=b:121287022 b:329657774
TEST=emerge-${BOARD} coreboot then check ACPI table on DUT
Change-Id: If27042cc995ef188f8a3e31444e994318ff98803
Signed-off-by: Won Chung <wonchung@google.com>
Tested-by: Emilie Roberts <hadrosaur@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81089
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Emilie Roberts <hadrosaur@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
soc/intel/xeon_sp/acpi/*.asl are actually used only by SKX and CPX
platforms and not forward compatible to later SoC generations.
Move them to soc/intel/xeon_sp/acpi/gen1/ for clean maintenance.
TEST=Build and boot on intel/archercity CRB
Change-Id: Ib060b123ab0fd761f00d9a0573e9b73d600ea9ef
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82033
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This file is appended to Documentation/util.md by the util_readme.sh
script, and contains toctree entries for utilities with more in-depth
documentation than the description automatically pulled from the
description.md files throughout the util directory. As of commit
35599f9a66 (Docs: Replace Recommonmark with MyST Parser), the syntax
for creating a toctree has changed, so update this post_util.md
accordingly.
Change-Id: Ia7ae3c513781e53512763578fd97db7e2f75e65c
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82163
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Use the default position for ramtop and exclude it from the checksum.
Fixes invalid checksum after caching ramtop causing things like
disabling CSME to not work.
Fixes: 10d2af04e7 ("mb/system76: Add space for ramtop in CMOS layout")
Change-Id: If30df1e6f2735cf767856e42dfede3d17fe494eb
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81641
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Clean up the devicetree by removing entries which are equal to the
chipset devicetree. The P2SB device is enabled but it's hidden by the
FSP. So just remove that as well since the chipset devicetree configures
it correctly.
Change-Id: I38f46949d36359826317252e8d3434ad1b24382d
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82156
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Clean up the devicetree by removing entries which are equal to the
chipset devicetree. The P2SB device is enabled but it's hidden by the
FSP. So just remove that as well since the chipset devicetree configures
it correctly.
Change-Id: I6186d295427bcd4a3b696f4df59d94a148ced011
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82154
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Update TDP PL1 value for the DTT optimization. The new value 18W is from
internal thermal/performance team.
- tdp_pl1_override: 15 -> 18 (W)
BUG=b:336684032
BRANCH=brya
TEST=built and verified MSR PL1 value.
Intel doc #614179 introduces how to check current PL values.
[Original MSR PL1/PL2/PL4 register values for xol]
cd /sys/class/powercap/intel-rapl/intel-rapl\:0/
grep . *power_limit*
constraint_0_power_limit_uw:15000000 <= MSR PL1 (15W)
constraint_1_power_limit_uw:55000000 <= MSR PL2 (55W)
constraint_2_power_limit_uw:114000000 <= MSR PL4 (114W)
After this patch:
constraint_0_power_limit_uw:18000000
constraint_1_power_limit_uw:55000000
constraint_2_power_limit_uw:114000000
Change-Id: I28c4f099e0169e8389f63083c03023dd8338589f
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82151
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Create the riven variant of nissa reference board by copying the
template files to a new directory named for the variant.
The riven variant is a twinlake platform.
BUG=b:337169542
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_RIVEN
Change-Id: I1be2346d87c891cc0e5fbda094e1f6e0dd60df1b
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82132
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When in Package C3 or deeper the PSI settings are used to switch the
CPU VR into a low power state. It was found that the voltage regulator
on the Sandy-Bridge series has non-default PSI settings, compared to
Lenovo's Ivy-Bridge series. Apply the same PSI value for PSI2 and PSI3
as the vendor BIOS does to fix a hang when the package is idle.
Since neither the vendor BIOS is open-source, nor datasheet exists for
the used VR it's unclear why those PSI values must be used and how
they influence the regulator.
The X220 already has the correct PSI values configured and is now stable
for more than 24h in Package C7 state.
TEST: Not tested on the affected boards, only checked vendor firmware.
Change-Id: Idf8c3719f19f7bcdab30c543215c8abd2669cfd2
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82070
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The current fast_spi code uses memcpy for rw. The SPI flash read/write
has 4 byte limit, due to which the current 64 bit memcpy doesn't work.
Hence update rw ops to use read32p/write32p.
BUG=b:242829490
TEST=Verified MRC cache working on MTL 64-bit, future 64 bit platforms
and RPL(brox/skolas) 32-bit platforms.
Change-Id: I317c7160bf192dd2aeacebf6029a809bc97f3420
Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82079
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Correct .UserBd field to BOARD_TYPE_ULT_ULX from BOARD_TYPE_MOBILE. This
is from Intel's guidance for MRC to map the memory speed to proper POR
number.
BUG=b:332980211
BRANCH=brya
TEST=Built and compare the results of command 'dmidecode -t 17'
[Before]
(Same values in all of memory device handle)
Speed: 6400 MT/s
Configured Memory Speed: 6400 MT/s
[After]
(Same values in all of memory device handle)
Speed: 5200 MT/s
Configured Memory Speed: 5200 MT/s
Change-Id: Id16bcbc2d0cb4c2cf3008cf2ef1027ed98e93afb
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jamie Chen <jamie.chen@intel.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
bmp_load_logo() loads the custom logo.bmp file into CBMEM. This cbmem
buffer is released after FSP-S init is complete. In certain platforms,
the logo file is displayed during PCI enumeration. This means the logo
buffer is used after it is released. Fix this issue by releasing the
logo buffer when the coreboot has finished loading payload. During S3
scenario CBMEM is locked, bmp logo is not loaded and hence the release
is a no-op.
BUG=b:337144954
TEST=Build Skyrim BIOS Image and boot to OS. Ensure that the chromeOS
boot logo is seen without any corruption.
Change-Id: Id27cf02de04055075e7c1cb0ae531dee8524f828
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82121
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Integrated Boot Logic (IBL) codes doesn't support bootloader
controlled Primary-to-Sideband Bridge (P2SB) hidden and unhidden.
Hence, dynamically read IBL HPET/IOAPIC Bus:Device.Function (BDF)
by bootloader is not supported, because when P2SB is hidden the
register access is denied.
TEST=Build and boot on intel/archercity CRB
TEST=Build on intel/avenuecity CRB
TEST=Build on intel/beechnutcity CRB
Change-Id: I3975cb00e215c4984c63bb8510e8aef7d4cc85a4
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81321
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Configuration variable implementation (VPD, et al) is regarded to
be mainboard specific and should not be bounded to SoC codes.
This patch moves the VPD based settings (FSP log level, et al)
from SoC codes to mainboard codes.
TEST=Build and boot on intel/archercity CRB with no significant log
differences
Change-Id: Iefea72eec6e52f8d1ae2d10e1edbabdebf4dff91
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82090
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Configuration variable implementation (VPD, et al) is regarded to
be mainboard specific and should not be bounded to SoC codes.
Add get_cxl_mode so that SoC codes do not need to get this
configuration from VPD any more.
TEST=Build and boot on intel/archercity CRB with no significant log
differences
Change-Id: I1e08e92ad769112d7e570ee12cf973451a3befc0
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82092
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This patch sets different names for different mtlrvp
variants so they can be matched properly at runtime against
unique frids (i.e. firmware read-only identifiers).
BRANCH=firmware-rex-15709.B
TEST=Verified boot functionality on intel/mtlrvp
Change-Id: I5292a0ffcd7524c55cd7aef37c2f59432b2af06a
Signed-off-by: YH Lin <yueherngl@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
In NUMA architecture, all devices (cpu, memory and PCI device)
belong to specific proximity domain. Add utils to map device
instance to their proximity domain.
Proximity domain ID is the index assigned at the creation of
proximity domains. There is no hard relationship between proximity
domain ID and the device identities (e.g. socket ID). Hence we
need the map utils to explicitly link them.
For now the Sub-NUMA config isn't taken into account.
TEST=Build and boot on intel/archercity CRB
Change-Id: Icd14a98823491ccfc38473e44a26dddfbbcaa7c0
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Co-authored-by: Ziang Wang <ziang.wang@intel.com>
Co-authored-by: Gang Chen <gang.c.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81440
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add FSP 2 Multi Processor Platform Initialization module a function
indirection to ensure that efi_ap_procedure functions are called with
the appropriate C calling convention.
BUG=b:329034258
TEST=Verified both x86_32 and x86_64 builds on Meteor Lake board (Rex)
Change-Id: I64e65b2941207375d5e27c84aa26061e7e72a7f6
Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81663
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- Stack alignment:
1. FSP functions must be called with the stack 16-bytes aligned
in x86_64 mode.This is already setup properly with the default
value of the `mpreferred-stack-boundary' compiler option (4).
2. The FSP heap buffer supplied by coreboot through the `StackBase'
UPD must be 16-bytes aligned. This alignment is consistent for
both x86_64 and x86_32 modes to simplify the implementation.
BUG=b:329034258
TEST=Verified on Meteor Lake board (Rex)
Change-Id: I86048c5d3623a29f17a5e492cd67568e4844589c
Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81661
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Add GPP_F18 configuration in early_gpio_table.
Without this, DUT cannot get the proper state of this signal on early
phase. It allowed DUT to attempt to enter into dev mode when EC is in RW
currently, it causes the failure of autotest/firmware_DevMode.
BUG=b:337365524
TEST=built and run autotest firmware_DevMode
Change-Id: I2179bb10b431547bc35f332c74915a63495b779d
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82099
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
GPP_D14 is floating when ISH is not being used and wasting power. Add
pulldown to prevent this from happening.
BUG=b:336654954
BRANCH=None
TEST=emerge-brox coreboot chromeos-bootimage
make sure OS boots up
HW team validated that power usage is 20 mW lower
Change-Id: I4e19e98fa31022ece66a47402a2a4461b430ef70
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82096
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
As described in Intel document 336464 (8th gen S series datasheet volume
1), the CPU's 4 eDP lanes can be bifurcated, so that DDI-A (eDP) ends up
with 2 lanes, and DDI-E (DP, typically used for VGA) has the remaining 2
lanes. This lets mainboards provide a VGA output without sacrificing one
of the main 4-lane DDIs. Newer platforms seem to be lacking this.
However, the way this is structured in coreboot does not allow boards to
choose whether bifurcation should be enabled. Most boards in the tree do
not use DDI-E (it doesn't exist on mobile platforms), but there are some
boards (e.g. hp/280_g2) that use DDI-E and a DP-to-VGA converter chip to
provide a VGA output.
Replace `SOC_INTEL_CONFIGURE_DDI_A_4_LANES` with two new Kconfig options
to allow boards to decide. Use `SOC_INTEL_GFX_HAVE_DDI_A_BIFURCATION` to
specify whether a platform supports DDI-A bifurcation at all (do nothing
otherwise, maintaining the original code's behaviour). If bifurcation is
supported, the `SOC_INTEL_GFX_ENABLE_DDI_E_BIFURCATION` is used to clear
or set the `DDI_A_4_LANES` bit in the `DDI_BUF_CTL_A` register.
Change-Id: I516538db77509209d371f3f49c920476e06b052f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82113
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update the pad reset config for Touchpad Interrupt from PLTRST to DEEP
so that it can still act as a wake source during S3 suspend.
BUG=b:336398012
TEST=Build Brox BIOS image and boot to OS. Suspend to S3 and wakeup
using Trackpad.
246 | 2024-04-25 16:55:18-0700 | ACPI Enter | S3
247 | 2024-04-25 16:55:34-0700 | ACPI Wake | S3
248 | 2024-04-25 16:55:34-0700 | Wake Source | GPE # | 67
249 | 2024-04-25 17:00:38-0700 | ACPI Enter | S3
250 | 2024-04-25 17:00:47-0700 | ACPI Wake | S3
251 | 2024-04-25 17:00:47-0700 | Wake Source | GPE # | 67
Also suspend to S0ix and wakeup using Trackpad.
Change-Id: If1a275e42c6c7ad743eedc9cd3320776008bfd62
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
When installing the packages, apt-get returns an error about holding
broken packages. It occurs the diffutils depends on libcurl4t64
which breaks the libcurl4.
As a solution, remove the libcurl4 from the list, and let the package
manager resolve the dependencies.
TEST=Build coreboot-sdk
Change-Id: Iabc4f74619d4462317d8adb4068e50135d89d80e
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
If the TPM is not detected in the system it may mean it is inactive
due to enabled ME with active PTT. In such case, the chipset will route
the TPM traffic to PTT CRB TPM on Intel systems.
If TPM is not probed, disable the PC80 TPM device driver, so that
coreboot will not generate improper SSDT ACPI table.
Change-Id: I05972ad74a36abaafa2f17a16f09710550a3a3f3
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80455
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
If CRB TPM is not detected in the system it may mean it is inactive
due to disabled or neutered ME. In such case, the chipset will route
the TPM traffic to LPC/SPI on Intel systems.
If CRB TPM is not probed, disable the CRB TPM device driver, so that
coreboot will not generate improper SMBIOS/SSDT ACPI tables.
Change-Id: Ie0928536d9042b1f680d585e1ca9ad2cadf0c8ef
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80454
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
RAMOOPS memory region was being overwritten by coreboot bmp_load_logo()
function. The CBMEM_ID_FSP_LOGO region created during bmp_load_logo()
was overlapping with RAMOOPS space created earlier. This resulted in
memory corruption of RAMOOPS buffer.
To prevent this, the RAMOOPS region allocation is moved to
BS_DEV_INIT_CHIPS phase from earlier BS_WRITE_TABLES phase of boot.
BUG=b:332910298
TEST=build and boot coreboot image on google/rex HW. Check RAMOOPS
CBMEM region creation using cbmem -l command
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: Ibae06362cd80eacb16f6cf0eed8c9aa1fbfb2535
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82042
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eran Mitrani <mitrani@google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This patch adds support for the new command-line option `-c` to
the ifdtool, which is able to check GPR0 (Global Protected Range)
status.
This patch also add helper function get_enabled_gprd() to get enabled
GPR0 settings. It used in enable_gpr0() and is_gpr0_protected().
Developers can use ifdtool with '-c' option to check whether GPR0 is
set to enabled or disabled in the binary file.
BUG=none
TEST=(1) > ifdtool -p mtl -E image-unlocked.bin -O image-lock.bin
...
Value at GPRD offset (64) is 0x83220004
--------- GPR0 Protected Range --------------
Start address = 0x00004000
End address = 0x00322fff
...
GPR0 protection is now enabled
(2) > ifdtool -p mtl -c image-unlocked.bin
GPR0 status: Disabled
Value at GPRD offset (64) is 0x00000000
--------- GPR0 Protected Range --------------
Start address = 0x00000000
End address = 0x00000fff
(3) > ifdtool -p mtl -c image-lock.bin
GPR0 status: Enabled
Value at GPRD offset (64) is 0x83220004
--------- GPR0 Protected Range --------------
Start address = 0x00004000
End address = 0x00322fff
Change-Id: I6b3af973be784200b965a68e5f6b7737cba03ed7
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81928
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Add STA panel STA_ER88577 serializable data to CBFS.
Datasheet: 2081101BH8028073-50E_Pre Spec_240424.pdf
About the init code, we communicated with the vendor through the
datasheet to confirm the writing method of each register value.
BUG=b:331870701
TEST=build and check the CBFS includes the panel
BRANCH=None
Change-Id: I210b23b67fbc102c9926171f1c78f6824820e4b7
Signed-off-by: Yang Wu <wuyang5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82054
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Rename the 'irq' element of the pci_routing_info struct to 'bridge_irq'
to better describe what it's doing. This struct element contains the
number of the northbridge IOAPIC IRQ input the bridge IRQ is connected
to signal power management or error reporting IRQs. Right now, coreboot
doesn't put this information into the ACPI bytecode.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6410be673d15d6f9b5eb4c80b51fb705fec5b155
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82048
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
There are 4 different chassis types specified by vendor firmware, each
with a slightly different HWM configuration.
The chassis type to use is determined at runtime by reading a set of
4 PCH GPIOs: 70, 38, 17, and 1.
Additionally vendor firmware also provides an option to run the fans at
full speed. This is substituted with a coreboot nvram option in this
implementation.
This was tested to make fan control work on my OptiPlex 7020 SFF.
NOTE: This is superficially similar to the OptiPlex 9010's SCH5545
however the OptiPlex 9020's SCH5555 does not use externally
programmed EC firmware.
Change-Id: Ibdccd3fc7364e03e84ca606592928410624eed43
Signed-off-by: Mate Kukri <kukri.mate@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81529
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
RT5663 is very old and it was used the hard code like RT53 or 10EC5663,
which is the different series from RT5645/5650, it may caused some
ambiguity. Because I2C generic driver dose not support dsd gpio
setting, we declared the new rt5645 series driver for expansion.
Add RT5645 AMP support. The kernel driver of 5650 is written
in rt5645.c. Add acpi name cbj-sleeve-gpios for power gate GPIO.
ALC5650 DataSheet Rev 0.93
Realtek upstream link:
https://lore.kernel.org/all/20240404035747.118064-1-derek.fang@realtek.com/
Hide the device because of Microsoft Windows.
BUG=None
TEST=verified in anraggar and probe device rt5650 succeed
```
\_SB.PCI0.I2C3.RT58: Realtek RT5650
```
Change-Id: I602fcc4dd8576043943f6e20884edc4703350320
Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81773
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
FSP 2.4 brings FSP 64-bits support which requires some adjustments in
coreboot:
FSP/UEFI uses the Microsoft x64 calling convention. Appropriate
attribute has to be set to all functions calling or called by
the FSP.
BUG=b:329034258
TEST=verified on Lunar Lake RVP board (lnlrvp)
Change-Id: If0397f5cc8d0f4f1872bd37a001fe42e0c37ec99
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80277
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Allow to set board specific CPU voltage regulator settings.
The VR12 compatible voltage regulator for the CPU can be configured
by two MSRs. Currently a default value is applied, which mimics the
Intel reference code and is what the BWG suggest. However most board
vendors fill in the actual VR parameters to support OC or ULV board
variants.
When the mainboard design is too different from the Intel reference
design, not updating the VR settings might result in:
- unstable system behaviour
- limited turbo performance
- excessive battery drain
- no over-clocking capability
This patch adds support to set the board specific current limit for
Icc and Igfx.
It also allows to adjust PSI1, PSI2 and PSI3, which are powerstates
used by the VR, that consume less energy when the system is idle.
Test on Lenovo X220 with full CPU load after 1 minute, compared to
previous code with default settings:
- Limiting PP0 max current below Iccmax results in less CPU performance.
RAPL readings show that less power is drawn over time.
- Limiting PP0 max current to Iccmax results in equal CPU performance.
RAPL readings show that the same power is drawn over time.
- Setting the PP0 max current to a value >> Iccmax results in equal CPU
performance. RAPL readings show that the same power is drawn over
time.
- Updating the MSR at runtime has no effect.
Change-Id: I59edab47fc4fbe0240e1dd7d25647f7549b4def2
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This patch introduces fsp print helper macros to print
`efi_return_status_t' with the appropriate format. These macros
are now used for fsp debug prints with return status
efi_return_status_t is defined as UINT64 or UNIT32 based on the
selected architecture
BUG=b:329034258
TEST=Verified on Meteor Lake board (Rex)
Change-Id: If6342c4d40c76b702351070e424797c21138a4a9
Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81630
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If the ChromiumOS EC indicates that the device has an assistant key,
we should also add it to the generated linux,keymap binding. This
commit simply does so by examining the keyboard capabilities reported by
the EC.
BUG=b:333088656
TEST=With a device that has an assistant key, flash AP FW and verify
that the key is mapped to `KEY_ASSISTANT` in the Linux kernel using
`evtest`.
Change-Id: I217220e89bce88e3045a4fc3b124954696276442
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81996
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
When the input device pointer pointing to a domain device,
dev_get_domain returns the input device itself.
TEST=Build and boot on intel/archercity CRB
Change-Id: I3a278a8f573de95406ee256fba17767def4ad75d
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81957
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Do not fill the ACPI table entry associated with the cros_ec_typec
driver once we switch to the UCSI kernel driver. Skip the ACPI entry if
EC implements the UCSI_PPM feature, and the CBI flag to enable UCSI is
set.
BUG=b:333078787
TEST=emerge-brox coreboot chromeos-bootimage
Cq-Depend: chromium:5416841
Change-Id: I67dff6445aa7ba3ba48a04d1df3541f880d09d0a
Signed-off-by: Pavan Holla <pholla@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81967
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Currently, arch/arm64 requires coreboot to run on EL3 due
to EL3 register access. This might be an issue when, for example,
one boots into TF-A first and drops into EL2 for coreboot afterwards.
This patch aims at making arch/arm64 more versatile by removing the
current EL3 constraint and allowing arm64 coreboot to run on EL1,
EL2 and EL3.
The strategy here, is to add a Kconfig option (ARM64_CURRENT_EL) which
lets us specify coreboot's EL upon entry. Based on that, we access the
appropriate ELx registers. So, for example, when running coreboot on
EL1, we would not access vbar_el3 or vbar_el2 but instead vbar_el1.
This way, we don't generate faults when accessing higher-EL registers.
Currently only tested on the qemu-aarch64 target. Exceptions were
tested by enabling FATAL_ASSERTS.
Signed-off-by: David Milosevic <David.Milosevic@9elements.com>
Change-Id: Iae1c57f0846c8d0585384f7e54102a837e701e7e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74798
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: ron minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Core 2 platforms have issues with HPET. Enable support to use the LAPIC
driver so those machines actually boot and don't hang.
The LAPIC is actually closer to the CPU than the HPET (on the PCH),
which reduces access latency, leading to higher resolution of the timer.
Tested on a Lenovo X200 with a Core 2 Duo.
Change-Id: I33144d6c1c120e7faa47b99e8262b0997c45c9b9
Signed-off-by: Jean Lucas <jean@4ray.co>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82000
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Generated using update_ec_headers.sh [EC-DIR].
The original include/ec_commands.h version in the EC repo is:
b3b35d6433 PPM: Rename ucsi_disabled to ucsi_enabled
The original include/ec_cmd_api.h version in the EC repo is:
562316a71e include: Add fingerprint host commands to ec_cmd_api.h
BUG=b:333078787
TEST=cros build-packages --board brox \
chromeos-bootimage depthcharge coreboot
TEST=cros build-packages --board brya \
chromeos-bootimage depthcharge coreboot
BRANCH=none
Change-Id: I94b509cd6ad8f24bfc3b44ef02633d06320f1e22
Signed-off-by: Pavan Holla <pholla@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81965
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Create the lotso variant of the brox reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:333494257
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brox -x -a
make sure the build includes GOOGLE_LOTSO
Change-Id: I5939127f9e6abe5b792c0627d9d67e739b27083b
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81817
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Some devices may generate scancodes for the Fn key if they have one.
If they do, we should add them to the linux,keymap binding.
BUG=b:333096023
TEST=Flash DUT that emits a scancode for the Fn key, verify that it is
mapped to KEY_FN in the Linux kernel using `evtest` when pressing the Fn
key.
Change-Id: Ie4daa64bc6b619392276d0b5f16e2d195d5bd68c
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81895
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
One can argue whether or not this is desirable, but disabling this means
you cannot use power from the USB ports when the board shuts down, which
is better controlled from an option, but at the very least disabled so
as to replicate default vendor firmware behaviour.
Disable deep sleep like it is disabled on all other variants.
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: I660f2efebf197df055ee7b9c349e4c2b64bda6cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75139
Reviewed-by: Keith Hui <buurin@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Copied this bit from asus/p8z77-m_pro, without it a GRUB2 payload will
get stuck in an endless loop showing
Unknown key 0xff detected
whenever there is an USB device (such as a keyboard) connected.
In this mode GRUB2 is so busy showing this message repeatedly that no
other keypress ever gets handled, and thus no other remedy is possible
than a reset via mb pins and unplugging the USB device.
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: Iebd433e2762a69241257e1b4f859319536a8d8f5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75138
Reviewed-by: Keith Hui <buurin@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Change `inl()` return type from `unsigned long` to `unsigned int` to
match the function definition and ensure consistency across platforms.
BUG=b:242829490
TEST=Compiled successfully in 32-bit and 64-bit modes.
Change-Id: I681935665c8de9ee472ab72fe1ac2f5dcc0f2534
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81961
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
In coreboot, domain indicates hardware units that provide/group
resource windows, For Xeon-SP, domains are PCIe compatible and
further function in many aspects, e.g. PCIe, CXL, IOAT, UBOX.
Rename dev_get_pci_domain to dev_get_domain to align with coreboot
concept and distinguish from Xeon-SP concept.
TEST=Build and boot on intel/archercity CRB
Change-Id: I51b18b30fb41038869ea1384b01091da31a895b9
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81554
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
WDT1 is currently enabled but gives these errors:
[ERROR] ERROR: Resource didn't fit!!!
PNP: 002e.8 60 * size: 0x8 limit: fff io
[ERROR] PNP: 002e.8 60 io size: 0x0000000008 not assigned in devicetree
Therefore, just disable it, like it is disabled on all other variants.
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: Ie33c219eae60f55d272b261480283a02c2d502e5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75144
Reviewed-by: Keith Hui <buurin@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The only implementations of `mb_post_raminit_setup()` in the tree are
found in Lenovo ThinkPads. These boards use this function to toggle a
SMBus mux, which makes the DIMM SPDs inaccessible. Given that the SPD
data is needed in `setup_sdram_meminfo()` and that there are no other
side-effects, simply move the call to `mb_post_raminit_setup()` after
the call to `setup_sdram_meminfo()`.
TEST=Verify SMBIOS Type 17 information for lenovo/x200 is correct.
Change-Id: I46abffa48e7e0848f9346ce9c6498860e4ece2da
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Fill in memory info so that coreboot can generate SMBIOS Type 17 tables.
The S/N, P/N and module ID fields are only populated for DDR3.
Change-Id: I92060ce05bdf0ca617a3383a2db1fdbd43df6fe4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81861
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jean Lucas
Support Memory for Hynix H58G66AK6BX070 and Samsung
K3KL9L90CM-MGCT in mem_parts_used list, and generate SPD ID for these
parts.
DRAM Part Name ID to assign
H58G66AK6BX070 4 (0100)
K3KL9L90CM-MGCT 5 (0101)
BUG=b:335341310
BRANCH=firmware-nissa-15217.B
TEST=Run command "go run ./util/spd_tools/src/part_id_gen/\
part_id_gen.go ADL lp5 \
src/mainboard/google/brya/variants/glassway/memory/ \
src/mainboard/google/brya/variants/glassway/memory/\
mem_parts_used.txt"
Change-Id: Ic07ec36a8015ce6433196a93e894b818a515b954
Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81955
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com>
Several zork-based boards use eMMC for storage, so enable the edk2 eMMC
driver when using the edk2 payload.
TEST=build/boot google/zork (morphius, vilboz), verify internal boot
media (both eMMC and NVMe) functional with edk2 payload.
Change-Id: Ib7e98f309594554dbcf1ddd875d47c89bd9e0e44
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81893
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add a Kconfig to selectively enable the AMD Picasso eMMC driver
recently added to MrChromebox's edk2 fork. When selected, will enable
booting from AMD Picasso devices with eMMC storage.
TEST=tested with rest of patch train
Change-Id: I6536a6f243f6766b913e295afebcf5b965e4e969
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81892
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Generated using update_ec_headers.sh [EC-DIR].
The original include/ec_commands.h version in the EC repo is:
9fdd96bfc6 keyboard: Add support for a "Dictation" key
The original include/ec_cmd_api.h version in the EC repo is:
562316a71e include: Add fingerprint host commands to ec_cmd_api.h
Change-Id: I7ec965d07aa4cb1fe54916845780f342ea3debb9
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81932
Reviewed-by: Forest Mittelberg <bmbm@google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add config choice menu and pad configuration to put Mini PCIe port into
mSATA mode.
The vendor firmware's "Chipset->Mini PCIe / mSATA Switch" option has
been used together with the output of inteltool and intel2pm to deduce
the exact pad configuration.
Note: the vendor firmware does not autodetect the mode, and the default
setting for the port is "Mini PCIe".
Tested with Kingston SUV500MS120G mSATA SSD.
Change-Id: Ic2da1dd4252ebb5e373bc65418e321f566d4c10f
Signed-off-by: Reto Buerki <reet@codelabs.ch>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This is another readily available (used market) system.
Based on autoport.
* All peripherals should work.
* Automatic fan control as well as S3 are working.
* The board was tested to boot Linux and Windows. EHCI debug is
untested.
* When using MrChromebox edk2 with secure boot build in, the board will
hang on each boot for about 20 seconds before continuing.
There are some quirks for doing the first flash, see the documentation.
Change-Id: Idf793fe915096cf2553572964faec5c7f8526b9a
Signed-off-by: Joel Linn <jl@conductive.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81368
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
The command "wget" prints some hyperlink with "%", which will be
filtered in by previous regular expression. So we need to change to
match the string with exactly 3 digits and a percent symbol.
TEST:
echo 45% | grep -o "\<[0-9]\{1,3\}%"
45%
echo 1245% | grep -o "\<[0-9]\{1,3\}%"
<empty>
echo aa% | grep -o "\<[0-9]\{1,3\}%"
<empty>
Change-Id: I6ef9e7c87fd4ee6cc707346954d91e6e3af3b939
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
The `PRIORITIZE_INTERNAL` option was somehow duplicated, so remove the
extra copy, leaving the one under the MrChromebox repo specific
settings.
TEST=build qemu w/edk2 payload, check build log that the
'PRIORITIZE_INTERNAL' option is only added once to the build string.
Change-Id: I4c4c433184d93337c926e256e77054afc00a2566
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81894
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
1. Remove non-use i2c address 0x10, 0x24 and 0x40 of touch IC for touch screen
2. Add new i2c address 0x5d of Goodix touch IC for touch screen
3. Add new i2c address 0x38 of Focal touch IC for touch pad
BUG=b:333804572
TEST=FW_NAME=sundance emerge-nissa coreboot chromeos-bootimage
Change-Id: I8e2c60820a07b99b69860fd4f6557b448aef2341
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81832
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Add a Kconfig to selectively enable the UFS DXE driver recently added
to MrChromebox's edk2 fork. When selected, will enable booting from
devices with UFS storage.
TEST=tested with rest of patch train
Change-Id: I0b54d21dc87abf6938c03948830f92ce5097ef7d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81870
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Create the pujjoga variant of nissa reference board by copying the
template files to a new directory named for the variant.
Due to new_variant.py limitation that repo can no longer be used in
inside, created this CL manually following google suggestion.
BUG=b:333839287
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_PUJJOGA
Change-Id: Ia8eb11eb65f9013e83abd45eefe7705d05b8697e
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81891
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
It shares southbridge devicetree definition with bd82x6x, causing
changes made there to break builds for boards with this PCH. Give
ibexpeak its own copy.
TEST=abuild tested with lenovo/t410, lenovo/x201, packardbell/ms2290. Timeless binary did not change for all.
Change-Id: I08229ca658bd9c360b6be6137d882d319041b730
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81889
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Program the AER capability header register in a single write because
it's write-once. In addition, only PCH-LP supports L1 sub-states, so
only report the L1 sub-state capability on PCH-LP. This follows what
Lynx Point PCH reference code version 1.9.1 does.
Change-Id: I08bd107eec7a3b2f1701c4657ae104e0818ae035
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57503
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Lynx Point PCH reference code version 1.9.1 programs the larger L1 exit
latency when ASPM is enabled. Document 535127 (BDW PCH-LP BS) also does
the same. Correct the condition accordingly. On Lynx Point, also remove
a now-redundant write to the LCAP register (offset 0x4c).
Change-Id: I2166bd5b5504ed97adcd2db0a802da02da4c91f3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57501
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Anything below 128K will cause SMMSTORE driver in edk2 to fail, since
a minimum of (2) 64K blocks are needed. Increase the size to 256K to
match other boards in the tree.
TEST=build/boot zork (morphius) with SMMSTORE enabled.
Change-Id: Ifd3be9b0757e270d2f106e2fbebf3991e49dec65
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81869
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Anything below 128K will cause SMMSTORE driver in edk2 to fail, since
a minimum of (2) 64K blocks are needed. Increase the size to 256K to
match other boards in the tree.
TEST=build/boot skyrim (frostflow) with SMMSTORE enabled.
Change-Id: I34f9d27c27ab7148dfc530322f741a576c348de7
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81868
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Anything below 128K will cause SMMSTORE driver in edk2 to fail, since
a minimum of (2) 64K blocks are needed. Increase the size to 256K to
match other boards in the tree.
TEST=build/boot guybrush (dewatt) with SMMSTORE enabled.
Change-Id: Ic4fdacd493d83fa3c1683a06d1276b0190f6db8b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81866
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The karma variant, being a Chromebase, has an internal eDP output for
the built-in display whereas the fizz/endeavour variants do not. Use
separate gma-mainboard.ads files so that karma's internal panel works
properly with libgfxinit.
TEST=build google/fizz (fizz/karma) with libgfxinit enabled, ensure
correct gma-mainboard.ads file is included in the build.
Change-Id: Ia6aca538ba8c13b48aa80901222071d704b5f0c0
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Some internal keyboards have a dictation key; this commit simply adds
support for this key by adding the mapping from the scancode to the
Linux keycode for use in the linux,physmap ACPI table.
BUG=b:333101631
TEST=Flash DUT that emits a scancode for a dictation key, verify that it
is mapped to KEY_DICTATE in the Linux kernel.
Change-Id: Iabc56662a9d6b29e84ab81ed93cb46d2e8372de9
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81863
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Lynx Point PCH reference code version 1.9.1 checks bit 29 to detect ASPM
on PCH-LP root port #6, not bit 28. Document 535127 (BDW PCH-LP BS) also
uses bit 29 for root port #6. Correct the bit used in the check, as well
as the surrounding comments.
Change-Id: Ie4bd7cbbfc151762f29eab1326567f987b25ab19
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57500
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For current generation SPR/EMR you need to add at least
3 different microcodes having about 2MiB of size in total.
This doesn't work with the hardcoded offset and size in Kconfig.
Since it's loaded through FIT there's no need to pass it to FSP-T.
Drop the hardcoded locations and place it somewhere in CBFS.
Test: Booted on ibm/sbp1 with microcode confirmed loaded in
bootblock on BSP. All the APs also have the correct
microcode version loaded.
TEST= Build and boot on intel/archercity CRB
'cat /proc/cpuinfo | grep microcode' result doesn't change
before and after this patch.
Change-Id: Iaa7007c2b11a860c9c664a7e753440bad7fe858e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81635
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Recent changes to the ITE 8772F SIO code caused the initial fan PWM
to change from 0 to 50%; set it to 30% to reduce fan noise while
still providing some temp control before the OS/ACPI takes over.
TEST=build/boot stumpy to payload, verify fan noise is negligible.
Change-Id: I287e46202ee1c112d1da63c0d8b7889958e3807e
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81514
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Recent changes to the ITE 8772F SIO code caused the initial fan PWM
to change from 0 to 50%; set it to 30% to reduce fan noise while
still providing some temp control before the OS/ACPI takes over.
TEST=build/boot google/beltino to payload, verify fan noise is
negligible.
Change-Id: I0177235d73e051f02b5333cf1d735556382b919f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81513
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
A number of ITE SIOs support "special fan control vectors", which
effectively allow non-linear fan speed control. This is for example used
by the vendor firmware of the "HP Pro 3500 Series".
The special vector registers won't be written to until the mb's
devicetree configures `FAN_VECX.tmp_start != 0`.
Change-Id: I93df2b5652fc3fde775b6161fa5bebc4a34d5e94
Signed-off-by: Joel Linn <jl@conductive.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81426
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
The it8772f is now configured by the much better common code that is
used for other chips in the family as well. This mainly concerns the EC,
the GPIO functionality was not moved to common as it currently lacks a
sane abstraction in any codebase.
The datasheets of the it8772e(f) and it8728f (for reference) were
studied and verified against the common code, adding exceptions where
needed.
Change-Id: Ic4d9d5460628e444dc20f620179b39c90dbc28c6
Signed-off-by: Joel Linn <jl@conductive.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81310
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Haswell ThinkPads have Nvidia Optimus wired in on some models.
With recent coreboot changes, legacy VGA decode is now disabled
on the iGPU, and the iGPU itself is disabled, when a dGPU is
present. This is a problem on Optimus laptops, because it means
that the Intel GPU would be effectively disabled, when it is the
one that has to handle the framebuffer.
On these boards, you can enable ONBOARD_VGA_IS_PRIMARY so that
coreboot does not disable the iGPU. This is because on Optimus
laptops, the Nvidia GPU is only used for offloaded rendering.
Enable ONBOARD_VGA_IS_PRIMARY by default on these boards.
Change-Id: I8f1e0ca2861d1cc9a9ad41e7c9257aeca1a62a31
Signed-off-by: Leah Rowe <info@minifree.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81645
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Integer division in C truncates toward zero. When the dividend and the
divisor are positive, one can add half of the divisor to the dividend to
round the division result towards the closest integer. We already have a
macro in commonlib to do just that, so put it to good use.
Tested with BUILD_TIMELESS=1, coreboot images for the Asus P8Z77-V LX2
and the Asrock B85M Pro4 do not change.
Change-Id: I251af82da15049a3a2aa6ea712ae8c9fe859caf6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52651
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The GPIO for NOTE_BOOK_MODE has changed from GPP_B17 to GPP_E9. Also
initializing it (if ISH is enabled) to be NF2 (ISH_GP4). Also took
the liberty of alphabetizing all the ISH GPIOs to they're easier to
search through.
BUG=b:316421831
BRANCH=None
TEST=emerge-brox coreboot chromeos-bootimage
Make sure that brox device still boots up with this change.
Change-Id: I4a091b58deb855c7a7f1489a9506db2f821503b7
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81789
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Previously incorrect sets of SATA ports were enabled.
There are no publically available schematics, but I am almost certain
the new values are correct.
The original 0x33 value was carlessly copy pasted, and only enables
ports 0, 1, 4, 5, leaving 2, 3 disabled.
On the SFF, with 0x33 only the first 2 ports worked. I have verified
by plugging in devices under the stock firmware that 0, 1, 2 are the
ones that should be enabled, so setting the value to 0x7 per datasheet.
This was also tested in practice to work.
I don't have an MT, but I was told the two white ports didn't work
with 0x33, so those are most certainly ports 3, 4, hence me setting
the value to 0xf. If the MT's working ports are port 0, 1 on the PCH
this is correct.
Signed-off-by: Mate Kukri <kukri.mate@gmail.com>
Change-Id: I32cb236b8f8140fba4a04c23161363d21741dcbc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81550
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Starting with version 18 LLVM puts code and data generated with
-ffunction-section -mcmodel=large inside sections with an 'l' prefix.
This would now also pick up const data in .rodata.
Change-Id: Ie07779ef548337772183ffe2d642f971d8cceae7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81777
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
MAINBOARD_USES_FSP2_0 selects PLATFORM_USES_FSP2_0 and
POSTCAR_STAGE which are used by all Xeon-SP platforms.
After the removal of MAINBOARD_USES_FSP2_0, PLATFORM_USES_FSP2_0
is implicitly selected by SoC Kconfigs in PLATFORM_USES_FSP2_X,
POSTCAR_STAGE is selected by XEON_SP_COMMON_BASE.
TEST=Build and boot on intel/archercity CRB
Change-Id: I45332d49dd21f9749fce458877777a4b783a1b11
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81783
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This is a good board for compiling TPM PPI sources for the following
reasons (based on `config TPM_PPI` definition):
- uses TPM
- the board is not related to ChromeOS
- ACPI tables are enabled
- it doesn't use EDK2 payload
At the moment drivers/tpm/ppi.c seems to not be compiled by CI at all,
see CB:69161 and CB:81590.
`CONFIG_TPM_PPI` is off by default but at least several configurations
under `configs/` (Protectli, MSI) should exercise the file because they
use EDK2 payload which changes default value. This is however negated
by abuild disabling all payloads and thus effectively preventing
`CONFIG_TPM_PPI` from being set. This board not using EDK2 also ensures
that `CONFIG_TPM_PPI=y` will not disappear after some future
`make savedefconfig`.
Change-Id: I316747a79b3142e9d6188c5986b344c7751d92d7
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81800
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Set orientation of KD_KD101NE3_40TI to LB_FB_ORIENTATION_RIGHT_UP to
align the volume up/down direction with menu up/down in FW screen.
BUG=b:331870701
TEST=emerge-staryu coreboot chromeos-bootimage, and check FW screen on
wugtrio, test volume key behaves as expected.
BRANCH=corsola
Change-Id: Ie101cc8b983d3d16587f88fa787ed622e59d27eb
Signed-off-by: Yang Wu <wuyang5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81752
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch renames the 16MB FMD file to remove the baseboard-specific
name 'Nissa'. This allows other supported baseboards to utilize the
16MB SPI flash. Additionally, the patch attempts to create a generic,
unified 32MB FMD file for both brya and nissa variants.
BUG=b:333314089
TEST=Build and boot Nivviks.
Change-Id: I9151a4bcbe9cc084cc19b1a3e91c0321fe4dcc37
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81676
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Correct verbtable value for pin widget 20 of Realtek ALC256 based on the
updated verbtable received from Realtek. Updated Version : 5.0.3.1. This
fixes the headset detection failure, when power_save is enabled in
legacy hda driver.
BUG=b:330433089
BRANCH=None
TEST=Verified headset on Brox
When connected to audiojack in power_save state of legacy hda driver,
headset is detected and audio is resumed.
Change-Id: I71b7d59b3ab5310a0b6cdb31fb5033f94263d151
Signed-off-by: Poornima Tom <poornima.tom@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81654
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Terry Cheong <htcheong@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
When soc/amd/genoa was renamed to soc/amd/genoa_poc and mb/amd/onyx
was renamed to mb/amd/onyx_poc, the MAINTAINERS file wasn't updated, so
no reviewers were added automatically to patches on Gerrit that change
things in soc/amd/genoa_poc or mb/amd/onyx_poc. Fix this by updating the
folder names in the MAINTAINERS file too.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib52781ebc98bd2ce9df495526cfaf9d884aace50
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81679
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Replace fixed-width integers for pointers and sizes with uintptr_t and
size_t, promoting portability across 32-bit and 64-bit architectures.
For FSP-API specific UPD assignments, rely on `efi_uintn_t` rather
fixed size datatype uint32_t/uint64_t.
BUG=b:242829490
TEST=Firmware splash screen visible on google/rex0 w/ both 32-bit and
64-bit compilation.
Change-Id: Iab5c612e0640441a2a10e77949416de2afdb8985
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81615
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
unlock_pam_regions() is needed for SKX and CPX. Put the codes into
chip_gen1.c so that it could be shared among SoC generations.
After shared, unlock_pam_regions() is still called from SKX and
CPX SoC specific codes. SPR will also use chip_gen1.c, but it will
not call unlock_pam_regions().
TEST=Build and boot on intel/archercity CRB
Change-Id: Idbc7dc6dd22a1747a65543666fc714a0872e6b37
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81619
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
This removes the runtime SMI call to set up the communication buffer
for SMMSTORE in favor of setting this buffer up during the installation
of the smihandler.
The reason is that it's less code in the handler and a time costly SMI
is also avoided in ramstage.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I94dce77711f37f87033530f5ae48cb850a39341b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79738
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Fast SPI code assumes only one SPI flash is present. The SPI flash
driver for older southbridges is able to detect multichip. See the
spi_is_multichip() in src/southbridge/intel/common/spi.c.
Some boards (e.g. Lenovo ThinkCentre M920 Tiny) still come with two
chips populated instead of one. With this change, both chips are probed,
and the correct total size is calculated. Otherwise, only the first one
was probed, which resulted in an error such as:
SF size 0x1000000 does not correspond to CONFIG_ROM_SIZE 0x1800000!!
Change-Id: I8d7449f9e1470dc234fe5ba5217d3ce4c142b49c
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
intel/common/block/acpi provides default soc_get_ioapic_info for
single IOAPIC model. Use the default soc_get_ioapic_info when
XEON_SP_HAVE_IIO_IOAPIC is not set. This model fits for SPR and
later.
TEST=Build and boot on intel/archercity CRB
Change-Id: I1ecfba49cd9b4dfbb3f11d58d04d07ea1752a131
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This change refactors EDK2 essential header management within the FSP
directory to ensure compatibility.
Header selection is now dynamically based on:
* FSP specification version: Distinguishes between 1.1 and 2.x
* EDK2 revision (for FSP 2.x): Chooses the appropriate FSP info header
FSP Header
|
|-> FSP 1.1 specification FSP_INFO_HEADER
|-> FSP 2.0 specification EDK2 release
|-> EDK2_2017 FSP_INFO_HEADER
|-> EDK2_2020 FSP_INFO_HEADER
|-> EDK2_2021 FSP_INFO_HEADER
|-> EDK2_2023 FSP_INFO_HEADER
Any .C/.H file requires to include FSP_INFO_HEADER can now just add the
FSP header alone.
BUG=b:242829490
TEST=Able to build google/rex0 with 64-bit FSP.
Change-Id: I29e5002821843c9cffbc8f6317d1062175f014ff
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81623
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch introduces the FSP_SIG macro into EDK2 headers to ensure
compilation compatibility when using FSP 2.x specifications.
Previously, the macro was only defined for FSP 1.1.
BUG=b:242829490
TEST=Successful build of google/rex0 with 64-bit FSP.
Change-Id: I4f97fc303ca2881ccd17b4d149d01c3b671dbbde
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81622
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
When battery level is below critical level or battery is not present,
cpus need to run with a power optimized configuration to avoid platform
instabilities such as system power down.
This will check the current battery status and configure cpu power
limits using current PD power value.
BUG=b:328729536
BRANCH=brya
TEST=built and verified MSR PL2/PL4 values.
Intel doc #614179 introduces how to check current PL values.
[Original MSR PL1/PL2/PL4 register values for xol]
cd /sys/class/powercap/intel-rapl/intel-rapl\:0/
grep . *power_limit*
constraint_0_power_limit_uw:15000000 <= MSR PL1 (15W)
constraint_1_power_limit_uw:55000000 <= MSR PL2 (55W)
constraint_2_power_limit_uw:114000000 <= MSR PL4 (114W)
[When connected 60W adapter without battery]
Before:
constraint_0_power_limit_uw:15000000
constraint_1_power_limit_uw:55000000
constraint_2_power_limit_uw:114000000
After:
constraint_0_power_limit_uw:15000000
constraint_1_power_limit_uw:55000000
constraint_2_power_limit_uw:60000000
[When connected 45W adapter without battery]
Before:
constraint_0_power_limit_uw:15000000
constraint_1_power_limit_uw:55000000
constraint_2_power_limit_uw:114000000
After:
constraint_0_power_limit_uw:15000000
constraint_1_power_limit_uw:45000000
constraint_2_power_limit_uw:45000000
Change-Id: I5d71e9edde0ecbd7aaf316cd754a6ebcff9da77d
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81614
Reviewed-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
In order to avoid the noise caused by the codec output to the audio
jack during the shutdown and poweron process, we will use GPP_A11 for
the codec power supply gate, keep low during the startup process, and
wait for the driver to turn on. This change does not affect the beep
output of depthcharge.
BUG=None
TEST=There is no squeaking sound when turning on and off
Change-Id: I5982be5a8d965086b46861f4c2c758d9bdee6e75
Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81629
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Currently the SRAT table only exposes one proximity group as
it uses the LAPIC node_id, which is always initialized to 0.
Use CPUID leaf 0x1f or 0xb to gather the node ID and fill it
to make sure that at least one proximity group for every socket
is advertised.
For now the SNC config isn't taken into account.
Change-Id: Ia3ed1e5923aa18ca7619b32cde491fdb4da0fa0d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This patch replaces UINT8 with uint8_t to align with coreboot's
standard data type conventions.
This promotes consistency within the codebase.
BUG=b:242829490
TEST=Verified firmware splash screen functionality on google/rex0.
Change-Id: I524bf6dc83e4330f155e21691f6b161643f29bd8
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81571
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Deku has two Ethernet ports. Currently both get assigned the wrong
MAC address due to the LAN devices indices being swapped and
vpd ethernet_mac0() affects device eth1 and vpd ethernet_mac1() affects
device eth0.
Correct the device indices for LAN devices so ethernet_mac[0-1] in vpd
can apply to the correct ethernet ports.
BUG=b:320203629
BRANCH=firmware-rex-15709.B
TEST=vpd -s ethernet_mac0=<mac address0>
vpd -s ethernet_mac1=<mac address1>
reboot the system and check ifconfig
eth0 and eth1 MAC addresses are fetched correctly
Change-Id: Id1508104cbb5cf0a234f34f9db19cc535fdb634b
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81564
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
When touch controller is configured as THC-SPI mode, DID is 0x7e49 for
THC0, and 0x7e4b for THC1.
0x7e48 and 0x7ea4 are the DIDs when ThcMode is 0 (default) for THC0
and THC1 respectively.
Refer MTL EDS vol 1: 640228.
BUG=b:307775082
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I1b98fdbd8d8588492bcafa0f3998818dc83ff1d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81330
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyoung Il Kim <kyoung.il.kim@intel.com>
unlock_pam_regions routes Programmable Attribute Map (PAM) access
to DRAM. In SPR, PAM routing to DRAM is covered by FSP. Move the
step to SoC specific codes.
TEST=intel/archercity CRB
Change-Id: I3fd1d806807449e6a4d9d4d2c8a47ce61ed53018
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81349
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Add dynamic PCI domain _OSC ASL generation codes, supporting both
PCIe and CXL domains.
Dynamic SSDT generation is used to generate a list of ASL device
objects based on FSP outputs (e.g. the SoC/SKU configurations)
and _OSC is a method inside these objects (hence it would be
straightforward to be generated altogether, plus some C codes
managed boot configs could be referenced as well).
This usage is optional. It is helpful for cases where the same
code set supports multiple SKUs/SoCs (difficult to be handled by
one set of static SSDT), and the CPU performance is good enough
to run SSDT generation logics with minimal costs.
TEST=intel/archercity CRB
Tested with https://review.coreboot.org/c/coreboot/+/81377.
Change-Id: I711ce5350d718e47feb2912555108801ad7f918d
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81375
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
IBL (Integrated Boot Logic) provides a subset of server
PCH logics for no-PCH solution. IBL is with limited features
and registers exposed, PCIe root ports/USB/SATA/LAN support are
removed.
Change-Id: I8f3d64a2dd3b79ec5a9e4306f40b012b00387259
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81314
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Granite Rapids (6th Gen Xeon-SP) FSP introduces UDS_STACK_RES/
UDS_SOCKET_RES and retires the usages of STACK_RES/
IIO_RESOURCE_INSTANCE. Make redinitions to make Xeon-SP common
codes to work for both 6th Gen before and later.
Change-Id: I28c948525cd6d7ac4b9c3fa67e3c99ec637ed38f
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81040
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The power_limits_config variable for ADL/RPL is array data, but we got
soc_power_limits_config variable without its index. So correct the
code to get the proper pointer of the data for current CPU SKU.
I tried to override the PL4 value to 80W from 114W with following
table in ramstage.c as a test for bug b/328729536.
```
const struct cpu_power_limits limits[] = {
{PCI_DID_INTEL_RPL_P_ID3, 15, 6000, 15000, 55000, 55000, 80000},
}
```
And then verified the msr_pl4 value on ChromeOS using Intel PTAT tool.
- Before this patch: msr_pl4 was not changed, it's always 114
- After this patch: msr_pl4 was changed to 80
BUG=None
BRANCH=None
TEST=Built and tested the function could adjust PL4 on xol in local.
Change-Id: I9f1ba25c2d673fda48babf773208c2f2d2386c53
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81436
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
ISH Firmware name needs to be configured only when full sensing
capabilities are enabled through ISH_ENABLE FW_CONFIG. Similarly DMA
property needs to be added only when UFS is enabled through STORAGE_UFS
FW_CONFIG. Hence configure the ISH device at run-time based on
FW_CONFIG.
BUG=b:319164720
TEST=Build Brox BIOS image and boot to OS.
Change-Id: I678416acd48e03ab77ae299beae6e295a688b8df
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81418
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Create the sundance variant of nissa reference board by copying the
template files to a new directory named for the variant.
Due to new_variant.py limitation that repo can no longer be used in
inside, created this CL manually following google suggestion.
BUG=b:328505938
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_SUNDANCE
Change-Id: Ia8ba318f18d2cac69898687311631778e61bf2ea
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81347
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
The RPL FSP currently uses HECI commands to retrieve the chipset
initialization version because the MBP HOB creation is disabled
(SkipMbpHob=1). This has resulted in an approximate 150ms increase in
boot time. Investigations are ongoing to determine the cause of the
delay when using HECI commands. As an interim solution, this patch sets
SkipMbpHob=0, enabling the use of MBP HOB or acquiring the chipset
initialization version, which is expected to reduce the boot time.
BUG=b:328430167
TEST= Able to build,boot and collect boot time data of brya.
With this patch:
963:returning from FspMultiPhaseSiInit 1,337,481 (249,046)
Without this patch:
963:returning from FspMultiPhaseSiInit 1,496,268 (408,194)
Signed-off-by: Kilari Raasi <kilari.raasi@intel.com>
Change-Id: I8a99a57b644732074e41051d99e63576f1edd229
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
GNR N-1 FSP headers are a set of stub headers used to fulfill
build sanity check for GNR SoC and CRB codes before the formal
FSP headers are published. The N-1 headers are forward compatible
with the later formal headers.
Change-Id: I1c8125dd64e5a9619073c2f17aeade1d33607870
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
GraniteRapids (6th Gen Xeon-SP) FSP contains changes in IIO stack
descriptors impacting the way of coreboot's creation of domains.
Separates the codes as preparation for 6th Gen and later platforms.
Change-Id: Iab6acaa5e5c090c8d821bd7c2d3e0e0ad7486bdc
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81312
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Add Kconfig option for full-speed setting. Some variants do not support
the full-speed at limit configuration (IT8772F). Keep it enabled for all
current variants that use the common EC code as it was previously
enabled unconditionally - datasheets weren't revisited individually.
Change-Id: Icf24ea1c4f41771a18803957456f0aeba0e51b13
Signed-off-by: Joel Linn <jl@conductive.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81525
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fix warning for disabled thermal inputs.
Fix warning for PECI thermal inputs if one was set up previously.
Depending on the mb, the superio will not go through power-on reset and
retain its registers. Do not trigger a warning if the current register
value aligns with the desired value. Don't return early if some input is
already configured for PECI, simply overwrite the configuration.
Both warnings were observed while porting the "HP Pro 3500 Series" mb.
Change-Id: Ibabe1b1ef55f2acb2074eceb535ec684bffc8155
Signed-off-by: Joel Linn <jl@conductive.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81516
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
When the compiler is used as a linker frontend clang tries to match the
target string with what it supports internally. If it's not sufficiently
complete it will forward linking to GCC which is not desirable. This is
necessary when doing LTO with clang.
Change-Id: Ie9356a2bc0f5b77e934cc16482d6ccb1961195dc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80730
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When switching back and forth between 32 to 64 bit mode, for example to
call a 32-bits FSP or to call the payload, new page tables in the
respective stage will be linked.
The advantages of this approach are:
- No need to determine a good place for page tables in CBFS that does
not overlap.
- Works with non memory mapped flash (however all coreboot targets
currently do support this)
- If later stages can use their own page tables which fits better with
the vboot RO/RW flow
A disadvantage is that it increases the stage size. This could be
improved upon by using 1G pages and generating the pages at runtime.
Note: qemu cannot have the page tables in the RO boot medium and needs
to relocate them at runtime. This is why keeping the existing code with
page tables in CBFS is done for now.
TEST: Booted to payload on google/vilbox and qemu/q35
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ied54b66b930187cba5fbc578a81ed5859a616562
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80337
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This does the following:
- Top align the bootblock so that the only the memory needed gets used.
This might slightly reduce the time the PSP needs to decompress the
bootblock in memory
- Use a memory directive to assert that the 16bit code is inside the top
64K segment
- Use the program counter less. While the BDF linker is happy about
running the program counter backwards, LLD is not. There is no
downside to this.
- Use a symbol rather that the program counter for sections. LLD gets
confused when (.) is used along with '<': it places the section at the
start of the memory region, rather than at the program counter. Using
a variable name works around this.
- Use a 'last_byte' section to make sure the first instruction is at
0xfff0. Both the BDF and the LLD linkers seems to work well with this
code
TEST: Both BFD and LLD are able to link the bootblock
Change-Id: I18bdf262f9c358aa01795b11efcb863686edc79c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Most of the original secdata_tpm.c was TPM2-specific implementation.
Just moving the code around, with trivial tweaks:
- drop now unnecessary #ifdef directives from _factory_initialize_tpm()
- drop leading underscore from _factory_initialize_tpm{1,2}() (external
identifiers should not start with an underscore in C)
- drop unused <security/vboot/tpm_common.h> include and sub-includes of
tss.h which should be considered its part (so this isn't an indirect
inclusion)
- fixed formatting of RETURN_ON_FAILURE() which didn't have slashes
aligned no matter what tab width was used
Change-Id: I0090b748d7d3b2d76a941b87b5885682fd81c4fc
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81415
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This prepares the code for enabling both CONFIG_TPM1 and CONFIG_TPM2
during compilation, in which case actual TPM family in use can be
determined at runtime.
In some places both compile-time and runtime checks are necessary.
Yet in places like probe functions runtime state checks don't make sense
as runtime state is defined by results of probing.
Change-Id: Id9cc25aad8d1d7bfad12b7a92059b1b3641bbfa9
Ticket: https://ticket.coreboot.org/issues/433
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69161
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
No functional changes. Refactor code such that there won't be any
compiler or linker errors if TSS 1.2 and TSS 2.0 were both compiled
in.
One might want to support both TPM families for example if TPM is
pluggable, while currently one has to reflash firmware along with
switching TPM device.
Change-Id: Ia0ea5a917c46ada9fc3274f17240e12bca98db6a
Ticket: https://ticket.coreboot.org/issues/433
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
For dram_type 21 the switch case in use_ddr4_params function falls to
default. This adds SPD_DRAM_LPDDR5X dram_type case to switch case block
for dram_type 21 in the function.
With this patch below NOTE will not be observed in the log:
[NOTE ] Defaulting to using DDR4 params. Please add dram_type check for 21 to use_ddr4_params
BUG=None
BRANCH=None
TEST=Boot brox SKU1/SKU2 and verify logs for default case
Change-Id: Id78ef90c0dc2e869c1f0424674b982ba64ba3939
Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81437
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Testing on the unmatched shows the code no longer works completely
correctly; Linux has taken over the handling of misalignment
anyway, because handling it in firmware, with the growing
complexity of the ISA and the awkward way in which it
has to be handled, is more trouble than its worth.
Plus, we don't WANT misalignment handled, magically, in
firmware: the cost of getting it wrong is high (as I've
spent a month learning); the performance is terrible (350x
slowdown; and most toolchains now know to avoid unaligned
load/store on RISC-V anyway.
But, mostly, if alignment problems exist, *we need to know*,
and if they're handled invisibly in firmware, we don't.
The problem with invisible handling was shown a while back
in the Go toolchain: runtime had a small error, such that
many misaligned load/store were happening, and it was
not discovered for some time. Had a trap been directed
to kernel or user on misalignment, the problem would
have been known immediately, not after many months.
(The error, btw, was masking the address with 3,
not 7, to detect misalignment; an easy mistake!).
But, the coreboot code does not work any more any way,
and it's not worth fixing. Remove it.
Tested by booting Linux to runlevel 1; before,
it would hang on an alignment fault, as the
alignment code was failing (somewhere).
This takes the coreboot SBI code much closer to
revival.
Change-Id: I84a8d433ed2f50745686a8c109d101e8718f2a46
Signed-off-by: Ronald G Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81416
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently, simply changing the wake event configuration to ANY does
not completely resolve the issue of inserting a pen not waking the
system. The pen actually needs to wake up the system both when plugged
in and when pulled out. This is because in the pen's GPP_F15
configuration, the original attribute is EDGE_SINGLE, which should be
changed to EDGE_BOTH.
BUG=b:328351027
TEST=insert and remove pen can wakes system up.
Change-Id: I1823afd0bcb86804227117d2d5def38788bc7387
Signed-off-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81441
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Wake signal from EC is routed to GPP_D1 and hence GPE_EC_WAKE
corresponds to GPE0_DW1_01. Fix GPE_EC_WAKE configuration.
BUG=b:329026602
TEST=Build Brox BIOS image and boot to OS. Trigger suspend and wake up
using EC generated events like AC connect/disconnect.
Change-Id: Ifb89bd0de7b7fc316792e801ed5a1d3f25ca5b1c
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81526
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Keith Short <keithshort@chromium.org>
After commit 35599f9a66 (Docs: Replace Recommonmark with MyST Parser),
embedded rST should use `{eval-rst}` instead of `eval_rst`. This was
missed during manual rebasing of that patch before it was merged.
Change-Id: I648a95488df25d70e1b581872a19272c51f33b7b
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81500
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Instead of using some aritmetics that sometimes works, use the largest
alignment necessary (page tables) and align downwards in the linker
script.
This fixes linking failing when linking in page tables inside the
bootblock.
This can result in a slight increase in bootblock size of at most 4096 -
512 bytes.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I78c6ba6e250ded3f04b12cd0c20b18cb653a1506
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80346
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
fsp_mrc_version() function does not need to perform a CBFS access to
to get an address to the FSP-M blob as the caller,
do_fsp_memory_init(), already has it loaded. In addition to make the
code simpler, it avoids an unnecessary decompression of the FSP blob
if `FSP_COMPRESS_FSP_M_LZ4' or `FSP_COMPRESS_FSP_M_LZMA' are set.
TEST=Verified on Meteor Lake rex
Change-Id: If355b5811a09a0b76acc8a297db719d54caedc54
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81256
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
This patch makes the GPL-restricted commonlib helpers available in
libpayload when CONFIG_LP_GPL is selected, as a convenience to GPL
payloads that use them a lot.
Cq-Depend: chromium:5375721
Change-Id: I844c6e700c4c0d557f97da94fa3aa2e868edd756
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
This patch adds timestamp start/end entries around the eSOL
implementation to track the panel initialization time while rendering
the eSOL screen.
TEST=Able to build and boot google/omnigul.
555: started early sign-off life (eSOL) notification 643,694 (40)
556: finished early sign-off life (eSOL) notification 1,072,143 (428,449)
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I51c04fc4bd2540b3f42e2f896178521d297ef246
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81387
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
This patch adds timestamp entries for eSOL (early Sign-Off Life).
This is critical to tracking the panel initialization time while
rendering the eSOL screen.
TEST=Able to build and boot google/omnigul.
555: started early sign-off life (eSOL) notification 643,694 (40)
556: finished early sign-off life (eSOL) notification 1,072,143 (428,449)
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I33f7f3a8622600ef23163faf45e2da7b96d6bbdb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81386
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The latest Clevo boards connect the TAS5825M to one of the I2C
connections instead of the SMBus connection. The I2C ops are compatible
with SMBus, so always use them.
Tested on system76/oryp6 (uses SMBus) and in-development system76/oryp12
(uses I2C3). TAS5825M init is successful and speaker output works.
Change-Id: I2233d6977fd460b53e27260cdfabe42e30b98041
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81126
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
A trailing "|" at the end of the regex added a zero length alternative
match, causing all files to match and be filtered out. This was causing
`make lint-stable` to ignore all missing license headers, preventing the
pre-commit git hook and Jenkins from detecting these. Also, a missing
"|" separator between cmos.default and .apcb would cause those files to
be unintentionally scanned.
Change-Id: I70cc3a5adf7edee059883cd3cbe02029776b02ef
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81422
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
When the concerned chip.h file is included in a source file, it causes
compilation error saying unknown type name bool. Fix it by including the
stdbool.h file in the chip.h file.
BUG=None
TEST=Build Brox by including the chip.h file in one of the source files.
Change-Id: I4159e2c281c3e89dc45555ce38ad8637a3bf8587
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81417
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Older parts do not have the menvcfg csr.
Provide a Kconfig variable, default y, to enable it.
Check the variable in the payload code, when coreboot SBI
is used, and print out if it is enabled.
The SiFive FU540 and FU740 do not support this register;
set the variable to n for those parts.
Add constants for this new CSR.
Change-Id: I6ea302a5acd98f6941bf314da89dd003ab20b596
Signed-off-by: Ronald G Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81425
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Print that the MPIO chip of one of the MPIO-related PCI device functions
is unused and is skipped, if the type is IFTYPE_UNUSED and the
corresponding PCI device function isn't enabled. This allows to
differentiate between this case and the case where the type isn't
IFTYPE_UNUSED.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4fc28d39a229494b487b300b28f92bf3adad66f5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81384
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Since we're already passing a pointer to the corresponding device to
per_device_config, we don't need to pass the chip_info as separate
parameter. Before moving the PCIe port function device below the MPIO
chip, the chip_info struct was from a different device, so that change
allows this simplification.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0466f7ad2f5c9874d45712fa9f89b978bd2a09bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Move the gpp_bridge_* device functions that are bridges to the external
PCIe ports below the corresponding mpio chip. This avoids the need for
dummy devices and does things in a slightly more coreboot-native way.
TEST=PCIe lane config reported by openSIL is identical
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Varshit Pandya <pandyavarshit@gmail.com>
Change-Id: I7e39bf68d30d7d00b16f943953e8207d6fe9ef41
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81340
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit 8902dfa2bd.
This was originally assumed to be an FSP/Descriptor/PMC mismatch
but it turns out that the problem was coreboot incorrectly
detecting ASPM support on devices.
Revert so that a proper fix can be applied.
Change-Id: I3f83e79c1b21a6c3799abed4a279b8bd59ac3570
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81395
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Different SoC generations might have different FSP header files. It is
recommended to put these uncommon header files in soc_util.h so that
Xeon-SP codes refer to soc_util.h to include them in a clean way.
TEST=intel/archercity CRB
Change-Id: Icfc20921efe00bc69b0c16c665f65f5baae4c309
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81229
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove those MSVC compiler defaults checks so that the GCC defaults for
wchar_t can be used with UDK_202111_BINDING Kconfig.
Compilation error:
src/vendorcode/intel/edk2/edk2-stable202111/MdePkg/Include/Base.h:807:25:
error: static assertion failed: "sizeof (L\'A\') does not meet UEFI
Specification Data Type requirements"
src/vendorcode/intel/edk2/edk2-stable202111/MdePkg/Include/Base.h:807:25:
error: static assertion failed: "sizeof (L\"A\") does not meet UEFI
Specification Data Type requirements"
BUG=b:296433836
TEST=Able to build google/crassk with UDK_202111_BINDING.
Change-Id: Ib2716436a910b43a5e546afdedb9eec88c5da8c6
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81328
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Assign GPP_C0 and enable only the touchscreen. Before modification,
GPP_C0 supplies power to the touchscreen and sensor at the same time.
Now the hardware circuit has been modified, GPP_C0 supplies power to the
touchscreen alone. After the software is synchronously modified, when
the device enters suspend(S0ix), GPP_C0 will not enable VDD, which can
reduce the standby power consumption of the touchscreen when it is
suspended(S0ix), which is about 2.1mW.
BUG=b:304920262
TEST= touchscreen function workable
Change-Id: Ia06209aa8303be4fc0669c5d6e5d7a06e8e9ab99
Signed-off-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81265
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Recommonmark has been deprecated since 2021 [1] and the last release was
over 3 years ago [2]. As per their announcement, Markedly Structured
Text (MyST) Parser [3] is the recommended replacement.
For the most part, the existing documentation is compatible with MyST,
as both parsers are built around the CommonMark flavor of Markdown. The
main difference that affects coreboot is how the Sphinx toctree is
generated. Recommonmark has a feature called auto_toc_tree, which
converts single level lists of references into a toctree:
* [Part 1: Starting from scratch](part1.md)
* [Part 2: Submitting a patch to coreboot.org](part2.md)
* [Part 3: Writing unit tests](part3.md)
* [Managing local additions](managing_local_additions.md)
* [Flashing firmware](flashing_firmware/index.md)
MyST Parser does not provide a replacement for this feature, meaning the
toctree must be defined manually. This is done using MyST's syntax for
Sphinx directives:
```{toctree}
:maxdepth: 1
Part 1: Starting from scratch <part1.md>
Part 2: Submitting a patch to coreboot.org <part2.md>
Part 3: Writing unit tests <part3.md>
Managing local additions <managing_local_additions.md>
Flashing firmware <flashing_firmware/index.md>
```
Internally, auto_toc_tree essentially converts lists of references into
the Sphinx toctree structure that the MyST syntax above more directly
represents.
The toctrees were converted to the MyST syntax using the following
command and Python script:
`find ./ -iname "*.md" | xargs -n 1 python conv_toctree.py`
```
import re
import sys
in_list = False
f = open(sys.argv[1])
lines = f.readlines()
f.close()
with open(sys.argv[1], "w") as f:
for line in lines:
match = re.match(r"^[-*+] \[(.*)\]\((.*)\)$", line)
if match is not None:
if not in_list:
in_list = True
f.write("```{toctree}\n")
f.write(":maxdepth: 1\n\n")
f.write(match.group(1) + " <" + match.group(2) + ">\n")
else:
if in_list:
f.write("```\n")
f.write(line)
in_list = False
if in_list:
f.write("```\n")
```
While this does add a little more work for creating the toctree, this
does give more control over exactly what goes into the toctree. For
instance, lists of links to external resources currently end up in the
toctree, but we may want to limit it to pages within coreboot.
This change does break rendering and navigation of the documentation in
applications that can render Markdown, such as Okular, Gitiles, or the
GitHub mirror. Assuming the docs are mainly intended to be viewed after
being rendered to doc.coreboot.org, this is probably not an issue in
practice.
Another difference is that MyST natively supports Markdown tables,
whereas with Recommonmark, tables had to be written in embedded rST [4].
However, MyST also supports embedded rST, so the existing tables can be
easily converted as the syntax is nearly identical.
These were converted using
`find ./ -iname "*.md" | xargs -n 1 sed -i "s/eval_rst/{eval-rst}/"`
Makefile.sphinx and conf.py were regenerated from scratch by running
`sphinx-quickstart` using the updated version of Sphinx, which removes a
lot of old commented out boilerplate. Any relevant changes coreboot had
made on top of the previous autogenerated versions of these files were
ported over to the newly generated file.
From some initial testing the generated webpages appear and function
identically to the existing documentation built with Recommonmark.
TEST: `make -C util/docker docker-build-docs` builds the documentation
successfully and the generated output renders properly when viewed in
a web browser.
[1] https://github.com/readthedocs/recommonmark/issues/221
[2] https://pypi.org/project/recommonmark/
[3] https://myst-parser.readthedocs.io/en/latest/
[4] https://doc.coreboot.org/getting_started/writing_documentation.html
Change-Id: I0837c1722fa56d25c9441ea218e943d8f3d9b804
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73158
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update all pip packages related to coreboot's documentation to their
latest available version, and update the doc.coreboot.org base image
to Alpine 3.19.1. Add myst-parser in preparation to switch from
Recommonmark to MyST Parser.
TEST: The documentation builds and renders properly when built using
the updated container.
Change-Id: I8df4aadabc49c0201a836333745fe138184595ac
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80312
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently, pip modules are installed system-wide, which may cause
conflicts with modules installed using the package manager. Newer
versions of the Alpine base image also mark its system wide Python
installation as an externally managed environment, which will cause
pip to return an error as per recent Python recommendations [1].
TEST:
- `make -C util/docker doc.coreboot.org` builds the container
successfully
- `make -C util/docker docker-build-docs` builds the documentation
successfully
[1] https://peps.python.org/pep-0668/
Change-Id: Idd9cc5e6fb28b42ef8e4fa5db01eb9ef192ba0ec
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80311
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
After final production, it's possible by setting particular
bit using DCFG the OEM/ODM locks down thermal tuning beyond
what is usually done on the given platform.
In that case user space calibration tools should not try
to adjust the thermal configuration of the system.
By adding new DCFG (Device Configuration) it allows the
OEM/ODM to control this thermal tuning mechanism. They can
configure it by adding dcfg config under overridetree.cb file.
The default value for all bits is 0 to ensure default behavior
and backwards compatibility.
For an example if Bit 0 being set represents Generic DTT UI
access control is disabled and Bit 2 being set represents DTT
shell access control is disabled.
Each bit represents different configuration access control
for DTT as per BIOS specification document #640237.
It also gives the provision for user space to check the current
mode. This mode value is based on BIOS specification document
number #640237.
BUG=b:272382080
TEST=Build, boot on rex board and dump SSDT to check DCFG value.
Also, verified the newly added sysfs attribute "production_mode"
present under /sys/bus/platform/devices/INTC1042:00 path.
Change-Id: I507c4d6eee565d39b2f42950d888d110ab94de64
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78386
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch creates a new tivviks variant, which is a Twinlake
platform. This variant uses Nivviks board mounted with the
Twinlake SOC and hence the plan is to reuse the existing
nivviks code.
BUG=b:327550938
TEST= Genearte the Tivviks firmware builds and verify with boot check.
Change-Id: Ia833a1dad45e13cd271506ade364b116c5880982
Signed-off-by: Sowmya V <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81262
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Set FW_CONFIG bit 21 to enable ISH PCI device and define ISH main
firmware name so ISH shim loader can load firmware from file system.
ISH also need to be enabled if STORAGE_UFS is set.
BUG=b:280329972
TEST= Set bit CBI FW_CONFIG bit 21
Boot Brox board, check that ISH is enabled and loaded
lspci shows: 00:12.0 Serial controller: Intel Corporation Alder
Lake-P Integrated Sensor Hub (rev 01).
Change-Id: Iadc5108c62737d27642a6948c00b5c122541aaba
Signed-off-by: Li Feng <li1.feng@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80773
Reviewed-by: Tanu Malhotra <tanu.malhotra@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Yuval Peress <peress@google.com>
Add IFTYPE_UNUSED as first element to the mpio_type enum. This allows
checking if the type was set in the devicetree, since the default will
now be IFTYPE_UNUSED. If the type is set to IFTYPE_UNUSED although the
corresponding PCI device function, a warning is printed and the PCI
device function is disabled.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I85e2589c021b4f05662369fd551146b6f2fa0ad4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81339
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The purpose of integration function is to pack the FWs into table. We
need to remove other process. Create a dedicate function to link all
the tables together. And this linking function is only called when
both the level 1 and level 2 directory are created. This simplifies
the main function and logic.
TEST=Identical test on all AMD SOC platform
Change-Id: Ieaf97208e943c79d7b76ea62eea9355138c220b9
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81252
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This data is used by smm_region_overlaps_handler(). Callers use this
helper to determine if it's safe to read/write to memory buffers taken
from untrusted input.
coreboot SMI handlers must not be confused into writing over any SMRAM
subregion, which includes the TSEG_STAGE_CACHE and chipset-specific area
(sometimes, IED), not just the handlers.
If stage cache writes were permitted, this could compromise the
integrity of the S3 resume path.
The consequences to overwriting the chipset-specific area are undefined.
Change-Id: Ibd9ed34fcfd77a4236b5cf122747a6718ce9c91f
Signed-off-by: Benjamin Doron <benjamin.doron@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80703
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
CB:77969 made minor changes to the die_if() macro. One of the
consequences is that the format string passed to it can no longer be a
real `char *` variable, it needs to actually be a string literal. In the
vast majority of call sites that is already the case, but there was one
instance in the GDB code where we're reusing the same format string many
times and for that reason put it into a const variable. Fix that by
turning it into a #define macro instead. (Even though this technically
duplicates the format string, the linker is able to merge identical
string literals together again, so it doesn't really end up taking more
space.)
Change-Id: I532a04b868f12aa0e3c01422c075ddaade251827
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81361
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Select USE_UNIFIED_AP_FIRMWARE_FOR_UFS_AND_NON_UFS in brox Kconfig.
This enables a single binary for both SKU1 and SKU2. For SKU2, upon
boot from cold reset, it will disable the UFS Controller and then
trigger a warm boot.
BUG=b:329209576
BRANCH=None
TEST=Boot image on SKU1/SKU2 and check S0ix working.
Change-Id: Iabd0b3a83aa386e09310b671632368807a4018d4
Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Instead of including the generated dependency file during the evaluation
of asl_template, add it to the DEPENDENCIES variable so that it is
included at the same time as the rest of the .d files in the top level
Makefile. This makes the handling of .d files cleaner as all of them are
processed in the same way. Tracking all of them in a single variable
also prevents any from being missed if any post-processing is performed
on them, such as running them through the fixdep utility from the Linux
kernel project to replace the config.h dependency with only the configs
that are used.
This should be safe since asl_template is evaluated while calling
includemakefiles, which is occurs before the files in DEPENDENCIES are
included.
TEST:
1. Build dell/e6400
2. Run `touch src/mainboard/dell/e6400/dsdt.asl` (defined as a
prerequisite of build/dsdt.aml in build/dsdt.d)
3. Run `make --debug=b`
4. Verify that dsdt.aml was rebuilt due dsdt.asl being newer than target
Change-Id: Ie8271d1e172395917f2859c8bbfd2041ddc572ca
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80383
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
This was added in commit 963bed546f (Make: Use unaltered object list for
dependency inclusion) to fix an issue caused by ramstage-postprocess.
The logic for handling dependency inclusion changed in commit db273065f6
(build system: extend src-to-obj for non-.c/.S files), causing the
variable to become unused.
Change-Id: I011ff2070bc31ab9ddf2536873555d0157f91fce
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80399
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Adjust touchscreen power sequencing for eKTH5015M.
The INX touch panel (eKTH5015M) contains a pull-up register which causes TCHSCR_REPORT_EN pull-up abnormally from Z1 power on.Because the t25 must be at least greater than 20ms, TCHSCR_REPORT_EN is initialized to GPO_L in the early stage (romstage) to meet the spec.
BUG=b:328170008
BRANCH=firmware-nissa-15217.B
TEST=Build and check I2C devices timing meet spec.
[INFO ] input: Elan Touchscreen as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-10/i2c-ELAN0001:00/input/in4
Change-Id: I50f9c21ddee2bc9c1d313f63049cb587b4ae047a
Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81135
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Improves user experience by highlighting a possibility of runtime
hangs caused by unsupported WB caching during NEM.
Recently we have encountered an issue on Intel platform and came to
know about the NEM logical limitation where due to cache sets are not
in power_on_two running into a runtime hang upon enabling WB caching.
BUG=b:306677879
BRANCH=firmware-rex-15709.B
TEST=Verified boot on google/ovis and google/rex (including Ovis with
non-power-of-two cache configuration).
Change-Id: Ic4fbef1fcc018856420428139683897634c9f85d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81336
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
There are 2 ways of referring to linker symbols, as extern
u8[] or extern u8*. Only the former will be correctly
initiated into an immediate operand (a constant) to asm.
DECLARE_REGION defines reference in form of extern u8[].
Use DECLARE_REGION as a standard way for these references.
TEST=intel/archercity CRB
Change-Id: I5f7d7855592d99b074f7ef49c285a13f8105f089
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81097
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
As of now coreboot only supported one PCI segment group and thus the
MMCONF size had to be limited to 256 buses on ibm/sbp1. Since the
default FSP doesn't allow to disable unused IIO stacks a patched
version had to be used. Those unused IIO stacks consume lots of PCI
bus ranges, leaving no free buses for the secondary side behind PCI
bridges. The IIO disable mechanism doesn't work after ACPI G3 exit
and thus requires multiple reboots when the previous state was G3.
Since coreboot now supports multi PCI segment groups enable 512
MMCONF buses on 4S platforms by default and drop the IIO stack
disable UPDs on ibm/sbp1. This allows to boot faster without the
need for a patched FSP.
The use of multiple PCI segment groups might prevent legacy software
from working properly, however the only board where multiple PCI
segment groups are used uses u-root as default payload.
TEST=Booted on ibm/sbp1 to ubuntu22.04 using two PCI segment groups.
TEST=intel/archercity CRB
Change-Id: I4e6e5eca1196d4ab50e43b4b58d24eca444ab519
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Add PCI enumeration support by reading the PCIeSegment reported in the
FSP HOB and add it when creating the PCI domain for each stack.
The PCI enumeration will be able to scan the additional PCI segment
groups and properly handle those devices.
TEST=Booted on ibm/sbp1 with multiple PCI segment groups enabled
to ubuntu 22.04.
TEST=intel/archercity CRB
Change-Id: I0ba5e426123234979d746d3bdfc1ddfbd71c3447
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79878
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For every PCI segment group generate a new SATC header.
Allows to generate proper ACPI code when multiple PCI segment
groups are enabled.
TEST=Booted on ibm/sbp1 with multiple PCI segment groups.
Properly generates multiple SATC headers.
TEST=intel/archercity CRB
Change-Id: I93b8ee05a7e6798e034f7a5da2c6883f0ee7a0e5
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
In DECLARE_REGION and DECLARE_OPTIONAL_REGION, a set of 3 variables
will be defined, that is the region 'base', 'end' and 'size'.
However, in many codes, the users will only selectively use 'end'
or 'size' instead of both of them, which will trigger compiler errors
for unused variables. This patch sets __maybe_unused attributes on
'end' and 'size' so that users do not need to use all of them.
TEST=intel/archercity CRB
Change-Id: Ia5ed183b2dd7a474ce51de47dbc1f9e3f61e5a41
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81209
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The DMAR entries of type "PCI" have no "Enumeration ID" and thus
there's no need to print it. Drop all unused Enumeration IDs to
simplify the code and debug prints.
Document ID: Intel Virtualization Technology for Directed I/O
Architecture Specification, Rev. 4.0, Order Number: D51397-015
TEST=intel/archercity CRB
Change-Id: I009fbfb9f9d62855d351c5db2d3d88722b5dbfa2
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81186
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Our major version is suddenly two digits long to represent the year.
This can't be parsed with the current sed scripts. To make sure that
no unparsed data ends up in our major/minor versions, we'll run sed
with `-n' and only print the extracted numbers if anything. Also, to
allow us to use the version numbers in C code, we strip leading zeros
(a leading 0 identifies octal numbers, so for instance 08 for August
is not a valid number).
This can result in empty major/minor version strings, so we move the
default `0' to the final variable expansion.
As a bonus, this makes an explicit check if the numbers can be parsed
unnecessary.
Change-Id: Ie39381a8ef4b971556168b6996efeefe6adf2b14
Reported-by: Christoph Zechner <christophz@vrvis.at>
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81290
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The entry in the table has two categaries, file and pointer. For the
pointer, it does not take table space. The ISH, PSP level 2, BIOS
table are all the pointer type. So integration function only packs FWs
located in folder amd_blobs. And only FWs increase the table size.
So the table size is only set once. Later calls only update the count
and fletcher. The table has a header at least, so the size can not be
0.
The fill_dir_header can take the parameter count as 0, such PSP level
1 only with ISH-A and ISH-B. It doesn't have any file type entries.
This actually reverts
https://review.coreboot.org/c/coreboot/+/78274
and adds other changes.
TEST=Identical test on all AMD SOC platform
Change-Id: I5dfbbb55912c8e37243c351427a8df89c12e5da8
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81255
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
CB:77968 made some non-BSD commonlib files part of libpayload when
CONFIG_LP_GPL is set. This patch exports those headers to the payload
(again only when CONFIG_LP_GPL is set) so that payloads can also call
the functions in them directly.
Also make those includes available to tests so that their functions can
be tested. There's no menuconfig for unit tests, so they are included
unconditionally, but this should be fine since the tests are standalone
and won't have to link with any proprietary third-party code.
Change-Id: Ifc3e52ee5c3e51520f7b7d44b483bfcb0e8380f8
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Create the bujia variant of the brask reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:327549688
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_BUJIA
Change-Id: I453a50f1aa64f8d4119bf0f860d928aa3e00a144
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81198
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
The value for CCACHE in site-local/Kconfig gets overridden by the
default in src/Kconfig. Remove the default to make overrides possible.
Change-Id: I6b9dbbb31caa3ef09afd7ecb355c01bd53807b39
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81267
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This patch enables the `SOC_INTEL_COMMON_BASECODE_RAMTOP` configuration
at the SoC level for all MTL devices. This change streamlines the
configuration process, avoiding redundant selections on individual
mainboards.
BUG=b:306677879
BRANCH=firmware-rex-15709.B
TEST=Verified boot functionality on google/ovis and google/rex.
Change-Id: I3aa3a83c190d0a0e93c267222a9dca0ac7651f9c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch ensures Ovis baseboard can select RAMTOP caching to improve
the boot time w/o any runtime hang.
BUG=b:306677879
BRANCH=firmware-rex-15709.B
TEST=Verified boot on google/ovis with ~30ms savings in boot time.
Change-Id: Ic0b73eb8fb9cd6ca70d3d7168b79dfd0fbc550e3
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch refactors RAMTOP MTRR type selection to address a critical
NEM logic bug on SoCs with non-power-of-two cache sets. This bug can
cause runtime hangs when Write Back (WB) caching is enabled.
Workaround: Force MTRR type to WC (Write Combining) on affected SoCs
when the cache set count is not a power of two.
BUG=b:306677879
BRANCH=firmware-rex-15709.B
TEST=Verified boot on google/ovis and google/rex (including Ovis with
non-power-of-two cache configuration).
Change-Id: Ia9a8f0d37d581b05c19ea7f9b1a07933caa956d4
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81269
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Introduce a function to determine whether the number of cache sets is
a power of two. This aligns with common cache design practices that
favor power-of-two counts for efficient indexing and addressing.
BUG=b:306677879
BRANCH=firmware-rex-15709.B
TEST=Verified functionality on google/ovis and google/rex (including
a non-power-of-two Ovis configuration).
Change-Id: I819e0d1aeb4c1dbe1cdf3115b2e172588a6e8da5
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81268
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
NVMe using clk_src[0] and clk_req[1] mapping to hardware design,
Due to inconsistency between PMC firmware and FSP, we need to set
clk_src to clk_req number, not same as hardware mapping in coreboot.
Then swap correct setting to clk_src=0,clk_req=1 in mFIT.
BUG=b:328318578
TEST=build firmware and veirfy suspend function on NVMe SKU DUT.
Cq-Depend: chrome-internal:7063434
Change-Id: I1777310782a0f4417bd1bb21287bec5852be966e
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81230
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
This patch moves commonlib/stdlib.h -> commonlib/bsd/stdlib.h, since
all code is BSD licensed anyway.
It also moves some code from libpayloads stdlib.h to
commonlib/bsd/stdlib.h so that it can be shared with coreboot. This is
useful for a subsequent commit that adds devicetree.c into commonlib.
Also we don't support DMA on arm platforms in coreboot (only libpayload)
therefore `dma_malloc()` has been removed and `dma_coherent()` has been
moved to architecture specific functions. Any architecture that tries to
use `dma_coherent()` now will get a compile time error. In order to not
break current platforms like mb/google/herobrine which make use of the
commonlib/storage/sdhci.c controller which in turn uses `dma_coherent` a
stub has been added to arch/arm64/dma.c.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I3a7ab0d1ddcc7ce9af121a61b4d4eafc9e563a8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77969
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Rewrite the function by iterating IOMMU (Input/Output Memory
Management Unit) devices instead of iterating socket and stacks,
which is more aligned to coreboot infrastructure.
TEST=intel/archercity CRB
coreboot DRHD generation is compared, the order of sections are
changed as expected but the content is kept equvalient.
Change-Id: I700513e05181303cf3f4effc793a872eb23340cb
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81228
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Obtain IOMMU (Input/Output Memory Management Unit) info and
enumerate devices using device utils instead of FSP HOB interface,
which might change across SoC generations and no ambiguity across
multiple PCIe segments.
TEST=intel/archercity CRB
coreboot DRHD generation log no changes before and after
Change-Id: Ic5c404899172a0e4fba2721b8e8ca6c1f0856698
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81227
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
pmc_gpe_init uses soc_get_gpi_gpe_configs to initialize dw0, dw1
and dw2. dw0, dw1 and dw2 are uninitialized before calling
soc_get_gpi_gpe_configs. This is error prone for some soc
implementations where soc_get_gpi_gpe_configs does nothing.
This patch is simple, just to assign zero values to dw0, dw1 and
dw0, to enhance the code robustness.
TEST=intel/archercity CRB
Signed-off-by: Gang Chen <gang.c.chen@intel.com>
Change-Id: I8a710a2ac1482eed8c11977d51b187d834122d26
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81210
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PMP (Physical Memory Protection) is a feature of the RISC-V
Privileged Architecture spec, that allows defining region(s) of
the address space to be protected in a variety of ways: ranges
for M mode can be protected against access from lower privilege
levels, and M mode can be locked out of accessig to memory
reserved for lower privilege levels. Limits on Read, Write, and
Execute are allowed. In coreboot, we protect against Write and
Execute of PMP code from lower levels, but allow Reading, so as
to ease data structure access. PMP is not a security boundary,
it is an accident prevention device.
PMP is used here to protect persistent ramstage code that is
used to support SBI, e.g. printk and some data structures. It
also protects the SBI stacks. Note that there is one stack per
hart. There are 512- and 1024-hart SoC's being built today, so
the stack should be kept small.
PMP is not a general purpose protection mechanism and it is easy
to get around it. For example, S mode can stage a DMA that
overwrites all the M mode code. PMP is, rather, a way to avoid
simple accidents. It is understood that PMP depends on proper OS
behavior to implement true SBI security (personal conversation
with a RISC-V architect). Think of PMP as "Protection Minus
Protection".
PMP is also a very limited resource, as defined in the
architecture. This language is instructive: "PMP entries are
described by an 8-bit configuration register and one XLEN-bit
address register. Some PMP settings additionally use the address
register associated with the preceding PMP entry. Up to 16 PMP
entries are supported. If any PMP entries are implemented, then
all PMP CSRs must be implemented, but all PMP CSR fields are
WARL and may be hardwired to zero. PMP CSRs are only accessible
to M-mode."
In other words if you implement PMP even a little, you have to
impelement it all; but you can implement it in part by simply
returning 0 for a pmpcfg. Also, PMP address registers (pmpaddr)
don't have to implement all the bits. On a SiFive FU740, for
example, PMP only implements bits 33:0, i.e. a 34 bit address.
PMPs are just packed with all kinds of special cases. There are
no requirements that you read back what you wrote to the pmpaddr
registers. The earlier PMP code would die if the read did not
match the write, but, since pmpaddr are WARL, that was not
correct. An SoC can just decide it only does 4096-byte
granularity, on TOR PMP types, and that is your problem if you
wanted finer granulatiry. SoC's don't have to implement all the
high order bits either.
And, to reiterate, there is no requirement about which of the pmpcfg
are implemented. Implementing just pmpcfg15 is allowed.
The coreboot SBI code was written before PMP existed. In order
for coreboot SBI code to work, this patch is necessary.
With this change, a simple S-mode payload that calls SBI putchar
works:
1:
li a7, 1
li a0, 48
ecall
j 1b
Without this change, it will not work.
Getting this to build on RV32 required changes to the API,
as it was incorrect. In RV32, PMP entries are 34 bits.
Hence, the setup_pmp needed to accept u64. So,
uinptr_t can not be used, as on 32 bits they are
only 32 bit numbers. The internal API uses uintptr_t,
but the exported API uses u64, so external code
does not have to think about right shifts on base
and size.
Errors are detected: an error in base and size will result
in a BIOS_EMERG print, but not a panic.
Boots not bricks if possible.
There are small changes to the internal API to reduce
stack pressure: there's no need to have two pmpcfg_t
on the stack when one will do.
TEST: Linux now boots partly on the SiFive unmatched. There are
changes in flight on the coreboot SBI that will allow Linux to
boot further, but they are out of scope for this patch.
Currently, clk_ignore_unused is required, this requires a
separate patch.
Change-Id: I6edce139d340783148cbb446cde004ba96e67944
Signed-off-by: Ronald G Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81153
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Hug <philipp@hug.cx>
In Xeon-SP, the domain0, which is located at stack0, usually needs
special handling due to the compatible devices on it (HEPT, IO-APIC
and legacy IOs). This patch adds util function detect whether a
give domain or stack is with such a role.
TEST=intel/archercity CRB
Change-Id: I2f26b4ac54091c24c554f17964502c364288aa40
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81199
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
For Xeon-SP, there are 4 main domain roles (PCIe/CXL/IOAT/UBOX).
This patch adds util function to check whether a given domain
belongs to one of these roles, or a give device belongs to
a domain of the specific role.
TEST=intel/archercity CRB
Change-Id: I6b31c29564c774c27e86f55749ca9eca057a0cfe
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81046
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Add a Nix shell file to provide a simple environment for coreboot
development of i386 architecture. Currently, this environment is
capable of completing Tutorial Part 1 in https://doc.coreboot.org.
The Nix shell can be used by running the following command:
$ nix-shell --pure util/nixshell/devshell-i386.nix
The `--pure` parameter is optional.
In Nixpkgs, there is a package called 'coreboot-toolchain'. It
fetches the source code of coreboot, build crossgcc, and export
it as output. With the binary cache mechanism of Nix, crossgcc
can be directly downloaded and used without compiling on user's
machine.
This Nix shell has been tested on a NixOS laptop and a Debian 12
server, and they both work fine.
Change-Id: Idcfe10be214e9bca590a62b8a207267493a4861f
Signed-off-by: Crabtux <crabtux@mail.ustc.edu.cn>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
This also does some light cleaning up:
- Place spaces in function names to make it easier to read.
- Adds a newline to a console message.
TEST=Tested to work on HP ProBook 450 G3
Change-Id: I73e60c5baa9db6874e480ecef41cf1006150e081
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81204
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Define SSFC bit 0-1 in coreboot for add 2nd BOE G7500 touchscreen.
BUG=b:329339069
BRANCH=firmware-nissa-15217.B
TEST=Check touchscreen can detect and function work.
[INFO ] input: GTCH7503:00 2A94:A804 as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-10/i2c-GTCH7503:00/0014
Change-Id: I85688919864e3cac1beb2442ef3e23fe9d5f916c
Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Now that EC software sync has been verified to work on Brox, we can
enable it by default.
BUG=b:326152804
BRANCH=None
TEST=Verify that SW sync occurs
Change-Id: I3d356c006fc448125605761f7328d1f1e203a7c4
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81211
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PAYLOAD_INFO is a very old feature that can add a key/value information
section to a payload file. It seems to have only ever been generated by
coreinfo and never really read by anything.
Since CB:1721 in 2012, the feature has been inadvertently broken in
practice since the `.note.pinfo` sections that contain the information
get discarded from the payload before cbfstool gets to see them. Since
CB:28647 in 2018, support for the section in the SELF loader was
(inadvertently?) dropped, so if someone actually fed cbfstool a payload
ELF that did have a `.note.pinfo` section, modern coreboot would refuse
to boot the payload entirely (which is probably not a good state to
leave things in).
This patch removes the code to generate PAYLOAD_INFO entries entirely,
but leaves the support to parse and extract those sections from old
payloads in place in cbfstool.
Change-Id: I40d8e9b76a171ebcdaa2eae02d54a1ca5e592c85
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81087
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Pull down USI_REPORT_EN(GPP_C6) in romstage to solve
an abnormal peek pull high before BL_EN.
Because power sequence no meet spec, pre #comment36,
it may have ghost touch.
BUG=b:326337003
TEST=FW_NAME=omnigul emerge-brya coreboot, measurement of HW and test
touch detection by evtest
Change-Id: I66f4a7915f135927fbc0a16254dece202dfc23a2
Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80769
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Rewrite the function by iterating IOMMU (Input/Output Memory
Management Unit) devices instead of iterating socket and stacks,
which is more aligned to coreboot infrastructure.
TEST=intel/archercity CRB
coreboot DRHD generation is compared, the order of sections are
changed as expected but the content is kept equvalient.
Change-Id: I4c1cbf8d8fc93f746640efc3a82c539dcb3fdee2
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81200
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Obtain IOMMU (Input/Output Memory Management Unit) info and
enumerate devices using device utils instead of FSP HOB interface,
which might change across SoC generations and no ambiguity across
multiple PCIe segments.
TEST=intel/archercity CRB
coreboot DRHD generation log no changes before and after
Change-Id: Idcfa899c764ffe51db5ed202ead07ad7b6868864
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81048
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The -1 review authority has been moved from all registered users to
users in the "reviewers" category. The reviewers group is for people
who have submitted patches to coreboot.
This change is taking the project back to how it was before 2016, and
is not due to any issues that we're seeing. The reason it was initially
changed was that in 2016, before we required all comments to be resolved
so the patch could be merged, it was easy to overlook comments that
should have been addressed. Now that the process has changed, the -1
right is no longer needed for all users simply to bring attention to
the comment.
The feeling in the leadership meeting was that since it's relatively
easy to get to reviewer status, this should not be an undue burden on
anyone.
Change-Id: I0b7f3dcc80b9122b0f923e6703da73391654d26c
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81177
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
For Xeon-SP, it's common pattern to find devices under specific
socket, stack and domain. This patch adds util function for
these operations.
TEST=intel/archercity CRB
Change-Id: I163eacae363334919fd66d571b7e0415e77bd52d
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81043
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
This add another choice option for adding a flat binary instead of an
ELF or some other payload. It keeps the IS_PAYLOAD_FLAT_BINARY hidden in
the menuconfig because it is generally not configurable but dependent on
the payload you selected.
CONFIG_PAYLOAD_OPTIONS has been exposed to be configurable in commit
f0055e4a81 (payloads/Kconfig: Add flat binary as payload option) as part
trying to enable flat binary payloads. CONFIG_PAYLOAD_OPTIONS do not
need to be configurable though unless you have a flat binary. The patch
therefore takes a different appraoch by adding a new payload type
besides PAYLOAD_ELF and PAYLOAD_FIT.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: If775e0846f9a5631da3fc103bdd9e6aea0be879a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Implement watchdog for intel based platform by filling ACPI Watchdog
Action Table (WDAT) table.
The WDAT ACPI table encompasses essential watchdog functions, including:
- Setting and retrieving countdown/timeout values
- Starting and stopping the watchdog
- Pinging the watchdog
- Retrieving the cause of the last reboot, whether it was triggered by
the watchdog or another reason
The general purpose register TCO_MESSAGE1 stores the reason for the most
recent reboot rather than the original register TCO2_STS. This is
because the firmware must clear TCO2_STS, and it can't be reused for
storing this information for the operating system.
The watchdog is designed for use by the OS through certain defined
actions in the WDAT table. It relies on the ACPI Power Management Timer,
which may result in an increase in power consumption.
BUG=b:314260167
TEST=Enable CONFIG_ACPI_WDAT_WDT and CONFIG_USE_PM_ACPI_TIMER in the
config. Enable CONFIG_WDAT_WDT in the kernel config. Build and deploy
both firmware and kernel to the device. Trigger the watchdog by
performing the command: “cat > /dev/watchdog”. Wait approximately 30
seconds for the watchdog to reset the device.
Change-Id: Iaf7971f8407920a553fd91d2ed04193c882e08f1
Signed-off-by: Marek Maslanka <mmaslanka@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79909
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
SATC is for RCiEPs (Root Complex Integrated EndPoints) but not
limited to IOAT domains. Rewrite the func by iterating all domains
and its RCiEPs. Currently the codes only support 1 PCIe segment.
TEST=intel/archercity CRB
coreboot SATC generation logs are unchanged before and after.
Change-Id: I1dfc56ccf279b77cfab4ae3457aa8799d2d57a34
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81049
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SPR CXL IIO stack is divided into 2 PCI domains. The 1st domain
is a PCI domain with single bus number and PCIe RCiEPs (Root
Complex Integrated End Points) on it. The 2nd domain is a CXL
domain with remaining buses for CXL 1.0/1.1 end points and
possible SR-IOV (Single Root IO Virtualizaton) VFs (Virtual
Function) if any.
TEST=intel/archercity CRB
P.S. The SUT is not with CXL cards however we hope this refactor
could be integrated first as an improvement of the design.
Change-Id: I643bcfbae7b6e8cfe11c147cc89374bc6b4d5a80
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81099
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Create the nova variant of the brask reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0.)
BUG=b:328711879
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_NOVA
Change-Id: Ie1cee43f0e2545288130bcc5152075603695c395
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81132
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Add a stub MPIO chip driver to the openSIL stub code, so that the
devicetree entries needed for the MPIO chip can already be added to the
mainboard's devicetree files. This driver won't do anything, but still
allows the register settings in the devicetree to be set to make
switching over to the actual openSIL code and the corresponding glue
code easier.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib4f5c232859b9abcd10bfa5c21e2f2c3a70b4b0e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
FSP can also make use of Multi-Processor services during its
multi-phase stages. If `USE_INTEL_FSP_MP_INIT' is set and
`USE_INTEL_FSP_TO_CALL_COREBOOT_PUBLISH_MP_PPI' unset coreboot cannot
take MP ownership as FSP-S may still use EDK2 MP services
concurrently.
TEST=verified on Lunar Lake RVP board (lnlrvp)
Change-Id: If0397f5cc8d0f4f1872bd37a001fe42e0c37ec92
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80691
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If the host directory of a bind mount does not exist, Docker will create
it. However, the newly created directory will be owned by root due to
the Docker service running within a root context. The docker command in
the recipe for docker-build-docs binds Documentation/_build to /data-out
within the container, so if it doesn't already exist, the documentation
builder will be unable to copy the HTML output into /data-out since it
runs with the same UID and GID as the host user.
By creating, if necessary, the _build directory before the `docker run`
command, there should always be an existing directory owned by the host
user for docker to bind /data-out to (ignoring the case of an existing
_build directory the current user does not have permission to write to),
avoiding the issue where it cannot write the output.
TEST: make -C util/docker docker-build-docs completes without issues
with and without an existing Documentation/_build directory
Change-Id: I6be9bc1fdca48f4d924f5c07cc261189ab6862fd
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81127
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Commit 829e8e65b9 ("soc/intel: Use common codeflow for MP init")
brokes `USE_INTEL_FSP_MP_INIT' by making `init_cpus' function
static. This function needs to be accessible from
src/drivers/intel/fsp2_0/fsp_mpinit.c.
TEST=Verified on Meteor Lake rex board
Change-Id: Idb8cdfef7b4279da2c7dff344c95fe446a605934
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80575
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
With this patch, all domain creation logics are moved into the scope
of attach_iio_stack/chip_common.c for the ease of maintenance
and future SoC integration where the domain creation process for
specific stack types might be overridden.
TEST=intel/archercity CRB
1. Boot to CentOS 9 Stream Cloud.
2. Compare PCIe enumeration and ACPI table generation logs before and
and after this patch, no changes.
Change-Id: If06bb5ff41b5f04cef766cf29d38369c6022da79
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81098
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable Acoustic noise mitigation for xol. The setting values are from
internal power team.
- Enable Acoustic noise mitigation
- Set slow slew rate VCCIA and VCCGT to SLEW_FAST_4
- Set FastPkgCRampDisable VCCIA and VCCGT to 1
BUG=None
TEST=FW_NAME=xol emerge-brya coreboot chromeos-bootimage
Change-Id: I6165ae6ca73d1467a1d2cc7bd545298bd4c2f54f
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81103
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Sometimes when a test doesn't work it's convenient to run it through
GDB. This patch adds a variable you can set on the make commandline to
conveniently enable all the compiler flags needed to make that work.
Change-Id: I3ac80ad095e0b72cc3176cbf915d1f390cd01558
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81112
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
For SKU1, wake pin is WLAN_PCIE_WAKE_ODL.
Update gpio config and corresponding ACPI for WoWLAN.
BUG=b:327379404
BRANCH=None
TEST=Boot image on SKU1 and check Wake on WLAN from S0ix.
Change-Id: I04c35da2c9ac57cafdf7f7a35d83ab2e7a05fe4a
Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80780
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Input file is parsed for FMAP and SMMSTORE region which is used if
found. Otherwise, the whole file is assumed to be the region. Passing
an image with FMAP that lacks SMMSTORER is an error.
Change-Id: Ieab555d7bbcfa4dadf6a5070d1297acd737440fb
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Cleanup the messy code. The code left in main is all about filling
tables.
To help to do this,
1. Some local variables are put into global struct.
2. Add some functions. Set some functions to global.
TEST=Identical test on all AMD platforms
Change-Id: Ia25c3fd5de7ae48054359f0f6551d91d7a4f6828
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78311
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The space defined by size of the L1 table can not overlap with ISH
header. For other cases, the size defines the directory and its
content.
The PSP spec does not say it quite clearly. This change is partly
based on guess and can make extraction tool work so far.
Change-Id: Id4fbc6d57d7ea070a9478649a96af92be9441289
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78274
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Set the unused 'name' property of the domain device and store
the ACPI name. Every IIO stack can have multiple domain devices,
each owning a subset of the available bus range within the stack.
The name will be used in future changes to generate ACPI names
in SSDT code generation. It can also be used to identify the domain
type by looking at the first two characters of the name.
Change-Id: Ic4cc81d198fb88300394055682a3954bf22db570
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80792
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
ACPI _PRT method was missing from PEG (SoC PCI-E) links, resulting in OS
complaining about interrupt routing.
'pcieport 0000:00:06.0: can't derive routing for PCI INT A'
'nvme 0000:04:00.0: PCI INT A: not connected'
'Interrupt: pin A routed to IRQ -2147483648'
TEST=Boot Linux and Windows 10 on TGL-H platform with PEG0/PEG1
populated with PCI-E devices - Radeon RX 7800XT and Kingston KC3000 NVME
SSD. Check logs and stability while running 3D application and disk
benchmark at the same time.
Change-Id: If102522efa1a67b362b14d859d9e27a37bad85a4
Signed-off-by: Alicja Michalska <ahplka19@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80848
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Starting with Intel CPX there is a bug in the reference code during
the Pipe init. This code synchronises the CAR between sockets in FSP-M.
This code implicitly assumes that the FSP heap is right above the
RC heap, where both of them are located at the bottom part of CAR.
Work around this issue by making that implicit assumption done in FSP
explicit in the coreboot linker script and allocation.
TEST=intel/archercity CRB
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Change-Id: I38a4f4b7470556e528a1672044c31f8bd92887d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80579
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
(NOLOAD) indicates that the section occupies no space in the file, but
does take up space in memory during process execution. It's typically
used for bss sections which contain uninitialized global/static
variables.
to_load makes sure the section is part of the program headers. This is
needed for instance with relocatable stages to know how much memory the
program will use.
Although the BFD linker makes some good guesses making this a NOOP,
other linkers like LLD need to mark these sections more explicitly.
Change-Id: Ic14543ba580abe7a34c69bba714eae8cce504977
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80803
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
This changes the virt target so that it can be run with the -bios option
and a pflash backend for the flash. QEMU can now be run as follows:
qemu -M virt -m 1G -nographic -bios build/coreboot.rom \
-drive if=pflash,file=./build/coreboot.rom,format=raw
coreboot will start in DRAM, but still have a flash to put CBFS onto and
to load subsequent stages and payload from.
Tested bootflow:
coreboot -> OpenSBI -> Linux -> u-root
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I009d97fa3e13068b91c604e987e50a65e525407d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80746
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: ron minnich <rminnich@gmail.com>
Reviewed-by: Philipp Hug <philipp@hug.cx>
The setting was reduced to 666 for native raminit in commit
7039edd2da (SNB+MRC boards: Migrate MRC settings to
devicetree) based on boot test results at the time.
With more changes merged, additional native raminit tests were
done on p8z77-m. It is now possible for previously failing
memory configurations to operate at full speed. This, combined
with multiple reports on gerrit that this family does work at
800, warrants returning the setting to what it was.
Change-Id: I1fbe9c8d076fcd633f71424d60585681c40677c4
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79726
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit b5f6320c69.
ADL-N FSP uses 202111 Edk2. There are structure definition changes
between 202005 and 202111. One of change is in FSP_INFO_HEADER structure.
This patch is to bring back support of edk2-stable202111.
BUG=b:296433836
TEST=Able to build google/crassk.
Change-Id: Id1d3e2c5b368a479e637f3ab3d18e242607849ed
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80273
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Instead of having things depend on EC_GOOGLE_CHROMEEC, just put an if/
endif block around the configs.
The 'source' line stays outside of the if block because the source
always happens, even if it's inside an if/endif block. Each of the
sub-Kconfigs here already has an if/endif block surrounding the
contents.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If88ba7d36ae04d879332037292c5cf9a3c8c3cab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81025
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
- Only compile code in ramstage
- Lock PAM on all sockets
- Instead of manually crafting S:B:D:F numbers for each PCI device
search for the devices by PCI vendor and device ID.
This adds PCI multi-segment support without any further code
modifications, since the correct PCI segment will be stored in the
devicetree.
Change-Id: Ic8b3bfee8f0d02790620280b30a9dc9a05da1be8
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80101
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
* Introduces logic to display context-specific boot splash logos.
* Logo selection considers:
* Chromebook-Plus hardware compliance (using factory_config).
* VPD-based product segmentation (soft-branded vs. regular
chromebook).
* Default Chromebook logo as fallback for regular Chromebook.
This patch fixes the problem where existing logic was unable to pick
correct ChromeOS boot splash logo based on the product segmentation.
Relation between product segment and boot splash screen:
1. Chromebook-Plus Hard-branded device: Renders "cb_plus_logo.bmp" logo
2. Chromebook-Plus Soft-branded device: Renders "cb_plus_logo.bmp" logo
3. Regular Chromebook device: Renders "cb_logo.bmp"
BUG=b:324107408
TEST=Verified logo selection based on compliance and product
requirements.
Change-Id: I9bb1e868764738333977bd8c990bea4253c9d37b
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80738
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
This patch introduces the vpd_get_feature_level() API to specifically
extract the "feature_level" field from the "feature_device_info" VPD
key.
This is used to distinguish between Chromebook-Plus and regular
Chromebook devices.
The previous vpd_get_feature_device_info() API is removed as
vpd_get_feature_level() is enough to find VPD and extract the data.
Note: The new API decodes the base64-encoded "feature_device_info" VPD
data.
BUG=b:324107408
TEST=Able to build and boot google/rex0.
Change-Id: I76fc220ed792abdfefb0b1a37873b5b828bfdda8
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80805
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Current version of qemu raise an exception when accessing invalid
memory. Modify the probing code to temporary redirect the exception
handler like on ARM platform.
Also move saving of the stack frame out to trap_util.S to have all at
the same place for a future rewrite.
TEST=boots to ramstage
Change-Id: I25860f688c7546714f6fdbce8c8f96da6400813c
Signed-off-by: Philipp Hug <philipp@hug.cx>
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36486
Reviewed-by: ron minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Turn off SD ASPM L1.1/L1.2 as w/a for wlan DMA resume failure
We completed 4 runs for each of the 2 tests - power_idle and power_VideoCall. Here are the averages for both the tests:
L1ss disabled SD plugged power idle test: 735.3875
L1ss enabled SD plugged power idle test: 737.2335
L1ss disabled SD plugged power video test: 333.29325
L1ss enabled SD plugged power video test: 333.442
BUG=b:254382832
TEST=test pass over 10k cycles
Signed-off-by: Jason Nien <finaljason@gmail.com>
Change-Id: I4d903f0f6333ffa18069e42be3c932aeae8013d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80237
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move hard-coded repo and repo name to Kconfig as default value
DEPTHCHARGE_REPO default to:
https://chromium.googlesource.com/chromiumos/platform/depthcharge
DEPTHCHARGE_BRANCH default to:
origin/main
When DEPTHCHARGE_MASTER=y, DEPTHCHARGE_BRANCH can be used to point
out a particular branch.
This change enable to use mirrored internal depthcharge repo and
branch for early SOC development (before upstreaming SOC and
dephthcharge code).
TEST=Build coreboot and check the repo remote link from:
payloads/external/depthcharge/depthcharge
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Icca10aa770b7b7a6e010f58bcf1e4f0a3401681a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80726
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Zhixing Ma <zhixing.ma@intel.com>
The OptiPlex 7020 and 9020 use physically identical motherboards.
WARNING: PWM fan control doesn't work via the EC and the fan runs at a
fixed speed. There is likely more EC init to reverse engineer.
Each model comes in the following form factors:
- 7020: SFF, MT
- 9020: USFF (not currently supported), SFF, MT
(7020 SFF) Boots Linux and Windows 10:
- Tested with an i3-4160 and i5-4460
- DRAM init works using the MRC (4G, 4G+4G)
- iGPU init works using libgfxinit (VGA, 2x DP)
- PCIe 16x: tested, ok
- PCIe 4x: tested, ok
- All USB2 and USB3 ports work
- SMSC SCH5555 Super I/O: serial works, PS/2 untested
- Audio: back and front output works, internal speaker works,
mic inputs untested
- Ethernet: tested, works
(9020 MT)
- Tested by Michael Büchler (thanks for the overridetree)
Change-Id: Ie7c7089f443aef9890711c4412209bceb1f1e96a
Signed-off-by: Mate Kukri <kukri.mate@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55232
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
This is usually is handled by Haswell mrc.bin, disabling VGA
decode on the iGPU when a dGPU is installed. However, Broadwell
mrc.bin does not, so the iGPU and dGPU are both enabled.
This patch disables legacy VGA cycles for iGPU, under such
conditions. It has been tested on Broadwell mrc.bin when
using a graphics card on Dell OptiPlex 9020 SFF (currently
under review at this time of writing, submitted by Mate
Kukri).
This patch has also been tested when Haswell mrc.bin is used,
and there are seemingly no breaking changes caused by it.
Change-Id: I1df0a3aa42f8475b7741007bf3e28c2e089d916b
Signed-off-by: Leah Rowe <info@minifree.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The FSP may fail to detect PCIe 4.0 devices in PCIe 3.0 slots on S3
resume. This issue has only been experienced on lemp12, and only with
Samsung drives, but implies it could happen on other systems or with
other drives as well. A timeout of 50ms is arbitrarily chosen.
Tested on lemp12 with Samsung 980 PRO (FW: 3B2QGXA7, 5B2QGXA7) and 990
PRO (FW: 4B2QJXD7) drives.
Change-Id: I4f44fc429c52e407b7566d6bb6dd31b2cf85c48d
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80756
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This UPD is hooked up in devicetree since commit 854bd492fc
("mb/{system76,msi}: Enable PchHdaAudioLinkHdaEnable via devicetree").
As these boards were in development when the change happened, they still
had the UPD set via romstage. Remove them now so they are only set in
devicetree.
Change-Id: I393e2c7b0134a31feae20f8992d7fd447ff7ee59
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80755
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Commit 4a58d14506 ("soc/intel/alderlake: Hook up UPD PchHdaSdiEnable")
and commit 2d48238618 ("soc/intel/alderlake: Set PchHdaSdiEnable for
Alder Lake") hooked up this UPD in devicetree, causing the FSP default
to be overridden (now disabled by default).
Enable SDI to fix the following error:
[DEBUG] PCI: 00:00:1f.3 init
[DEBUG] azalia_audio: base = 0xbfbcc000
[DEBUG] azalia_audio: No codec!
[DEBUG] PCI: 00:00:1f.3 init finished in 5 msecs
Tested on gaze17-3050: Speaker output works again.
Change-Id: Iceac1faec939ce9eea68c335929f96ec5f2bd132
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Fixes ACPI errors about missing methods:
ACPI BIOS Error (bug): Could not resolve symbol [_SB.PCI0.TDM0], AE_NOT_FOUND (20230628/dswload2-162)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20230628/psobject-220)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010)
ACPI BIOS Error (bug): Could not resolve symbol [_SB.PCI0.TRP0], AE_NOT_FOUND (20230628/dswload2-162)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20230628/psobject-220)
Tested on lemp12: ACPI errors in dmesg are gone.
Change-Id: I9b79cb04f57a27af2a6c8f3118e573f7ac0041e5
Signed-off-by: Dan Campbell <dan@compiledworks.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80791
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch automates the process of determining the CSE RW version used
for the CBFS entry, eliminating the need for manual configuration in
CONFIG_SOC_INTEL_CSE_RW_VERSION.
How to get CSE RW Version:
1. Open CSE RW file as per CONFIG_SOC_INTEL_CSE_RW_FILE
2. Read offset 16 (0x10) to know the CSE version
3. Format:
- CSE_VERSION_MAJOR : offset 16-17
- CSE_VERSION_MINOR : offset 18-19
- CSE_VERSION_HOTFIX: offset 20-21
- CSE_VERSION_HOTFIX: offset 22-23
Benefits:
- Removes error-prone manual version updates.
- Prevents boot loops due to mismatched CSE RW versions (actual vs config)
- Eliminates the need for SKU-specific CSE version limitations.
BUG=b:327842062
TEST=CSE RW update successful on Screebo with this patch.
Example Debug Output:
[DEBUG] cse_lite: RO version = 18.0.5.2066
[DEBUG] cse_lite: RW version = 18.0.5.2107
Change-Id: I0165d81b0e4b38e0e097956f250bb7484d774145
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80923
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some LDNs do not implement the activate bit at all, e.g. ITE GPIO LDNs
are an example where the LDN is always active. The pnp_generic.asl can
be used to describe the GPIO LDN resources configured by the platform,
however the register 0x30 is always 0 for these LDNs, so OS will not
claim the reported resource for the GPIO device, because _STA will
return inactive LDN.
Add SUPERIO_PNP_NO_DIS macro to generate _STA method returning an
always active LDN and skip _DIS generation. Define the SUPERIO_PNP_NO_DIS
for SIOs which use the pnp_generic.asl preserving the previous states,
except the ITE GPIO LDNs.
Change-Id: Ieb827fdffe7660b875cba6ca99b0560b4cab66b4
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80496
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Several older ChromeOS boards have issues with fan control on cold boot
and/or on S3 resume, so add functionality to allow those boards to
programmatically enable auto fan control.
TEST=build/boot google/link, verify fan ramps up/down accordingly with
CPU load.
Change-Id: I08a8562531f8af0c71230477d0221d536443f096
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80712
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Commit a662777b6f ("pnp_device: don't treat missing PNP_MSC devicetree
entry as error") lowered the log level for every resource without the
assigned bit set except for the IRQ0 and IRQ1 PNP device resources.
Commit df84fff80f ("device/pnp_device: Demote unassigned resource
printk to NOTICE") lowered the log level for the IRQ0 and IRQ1 PNP
device resources to a lower log level than for the other warnings that
are less likely a problem. Fix this regression by using the BIOS_NOTICE
log level for all PNP resources that don't have the IORESOURCE_ASSIGNED
bit set.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I232e60ef7ae672e18cc1837b8e6a0427d01c142b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80774
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
No Windows driver exists or is needed, so hide to prevent an unknown
device from being listed in Windows Device Manager. Same change was
made for frostflow variant previously.
TEST=build/boot Win11 on skyrim, verify unknown device for the
fingerprint reader no longer present.
Change-Id: Ia700aa4ccd478bc734db012e1419e566a5dcf493
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80711
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Even though it has an 'amd_' prefix, the amd_pci_domain_fill_ssdt
implementation doesn't contain any AMD-specific code and can also be
used by other SoCs. So factor it out, move the implementation to
src/acpi/acpigen_pci_root_resource_producer.c, and rename it to
pci_domain_fill_ssdt. When a SoC now assigns pci_domain_fill_ssdt to its
domain operation's acpi_fill_ssdt function pointer, the PCI domain
resource producer information will be added to the SSDT.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7bd8568cf0b7051c74adbedfe0e416a0938ccb99
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80464
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The M700 / M900 Tiny boards are USFF PCs that come with Skylake LGA1151
processors. M700 comes with B150 chipset, M900 comes with Q170 and is
vPro capable.
There is an onboard discrete TPM 1.2. Intel PTT fTPM can also be enabled
in vendor FW, but for now it's not used here.
LPSS UART for debugging is available on pins 17,18 on the underside of
the mainboard, but it is not enabled by default.
Tested unit is M900 with i5-6500T. Boots to Fedora 38 w/ kernel 6.5.5
and Windows 11.
Tested and working:
- Serial port (via optional module)
- Rear DisplayPort connectors
- Graphics w/ libgfxinit
- Ethernet
- SATA
- NVMe
- Internal speaker, front combo jack, rear line-out
- Discrete TPM 1.2
- USB ports (Port 1 untested, apparently broken on my unit)
- M.2 2230 Wi-Fi slot (needs ASPM L1s disabled)
- S3 suspend
- ME disable via NVRAM setting
Untested:
- Front mic input
- Optional expansion headers: DisplayPort, USB, PS/2, SATA / PCIe
Change-Id: I6786e068ec03c8bf243e1767cd7b9d50512ea77f
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80610
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
The processor may be a Pentium or 6/7th generation Core i3/i5/i7.
This port was tested on an i5-7400.
Working:
- Can boot Ubuntu 22.04.1 (Linux 6.5.0) using payloads:
- SeaBIOS
- TianoCore EDK 2
- Internal flashing (from coreboot)
- PEG
- PCIe
- SATA
- M.2 SSD
- M.2 WLAN (+ Bluetooth)
- LAN
- USB
- Memory card reader
- CPU fan
- VGA (DP bridge)
- Display ports
- Audio (output)
- COM1
- TPM
Not Working:
- SuperIO related things
- Power button LED
- PCIe clock related things and AER issues (LiveCD)
- Some drm issue when using EDK 2 and libgfxinit (LiveCD)
- ME cleaner
Untested:
- Audio (input)
Won't Test:
- COM2 header
- LPT header
- PS/2 keyboard and mouse
Thanks to Nico Huber and everyone else on the IRC for helping me write
my first port!
Change-Id: I551753aecfbd2c0ee57d85bb22cb943eb21af3cc
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80343
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This changes the location to be expressed as a combination of ORs. This
allows aliases for special locations.
For example, `AZALIA_REAR_PANEL` is easier to read than
`AZALIA_EXTERNAL_PRIMARY_CHASSIS, AZALIA_SPECIAL7`.
References:
- Intel High Definition Audio Specification, rev. 1.0a, page 180,
Table 110. Location.
Change-Id: I5a61a37ed70027700f07f1532c500f04d7a16ce1
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80740
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
We were keeping 2 copies of the same thing (albeit there were some
slight differences). As azalia_device.h is used much more in the
codebase this was kept as the base and then some of the nice features
of azalia.h were incorporated.
The significant changes are:
- All enum names now use the `AZALIA_` prefix.
This also drops the AzaliaPinConfiguration enum as it was never used
since added in 2013.
Change-Id: Ie874b083a18963679981a9cd2b25d123890d628e
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80695
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
The location is specified to be in range of 29:24, which is further
divided into upper bits (location2) [5:4] and lower bits (location1)
[3:0].
This also corrects the resulting values of clevo/l140mu.
References:
- Intel High Definition Audio Specification, rev. 1.0a, page 178,
Figure 74. Configuration Data Structure.
TEST=Timeless build using AZALIA_PIN_DESC() and without now produce the
same binary.
Change-Id: Ia5a3431b70783cb88e866d0fd8ea5530100f3d52
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80727
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When updating the Makefiles, to keep from having to update two files at
the same time, import Makefile.mk into the external Makefile. This
allows the bulk of the settings to be in a single location.
While I'm here, I adjusted the print statements to match the rest of
coreboot.
Change-Id: Id5b869f49b34b22e6a02fc086e7b42975141a87e
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80715
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Commit 8dc95ddbd4 ("emulation/qemu-i440fx: use fw_cfg_dma for
fw_cfg_read") adds DMA support to interface with the QEMU firmware
configuration device, and uses it to read from the "files" exposed by
the device. However, the file selection step still uses port-based IO.
Use DMA for fw_cfg file selection when possible, as a step towards
porting this driver to other architectures.
Change-Id: I46f9915e6df04d371c7084815f16034c7e9879d4
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
This reverts commit 99bf23c9e7.
This patch causes the boot regression at depthcharge with below
error signature. Able to boot to OS after reverting this patch.
```
Starting depthcharge on Rex...
WARNING: can't convert coreboot GPIOs, 'lid' won't be resampled at runtime!
WARNING: can't convert coreboot GPIOs, 'power' won't be resampled at runtime!
fw_config match found: AUDIO=MAX98360_ALC5682I_I2S
Looking for NVMe Controller 0x30069a60 @ 00:06:00
libc/lp_vboot.c:25 vboot_get_context(): vboot workbuf could not be initialized,
error: 0x10080030
Ready for GDB connection.
```
Change-Id: I8d49e2dc49cd2935a9d8023c989869ec9558039e
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80775
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Instead of manually crafting S:B:D:F numbers for each PCI device
search for the devices by PCI vendor and device ID.
This adds PCI multi-segment support without any further code
modifications, since the correct PCI segment will be stored in the
devicetree.
Change-Id: I1dcad4ba3fbc0295d74e1bf832cce95f014fd7bf
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80095
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Instead of manually crafting S:B:D:F numbers for each PCI device
search for the devices by PCI vendor and device ID.
This adds PCI multi-segment support without any further code
modifications, since the correct PCI segment will be stored in the
devicetree.
Intel Document-ID: 735086
Intel Document-ID: 612246
Tested: On SPR 4S all PCU on all 4 sockets could be found and locked.
Change-Id: I06694715cba76b101165f1cef66d161b0f896b26
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80093
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To allow for more flexibility like generating page tables at runtime or
page tables that are part of the ramstage, add a parameter to
sipi_vector.S and smm_stub.S so that APs use the same page tables as the
BSP during their initialization.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I1250ea6f63c65228178ee66e06d988dadfcc2a37
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80335
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
This patch introduces an API for reading "feature_device_info" VPD
data. This information is essential for correctly differentiating
ChromeOS product segments (e.g., Chromebook-Plus vs. standard
Chromebook models).
BUG=b:324107408
TEST=Build and boot successful on google/yahiko with this change.
Change-Id: I8d49e2dc49cd2935a9d8023c989869eb9558039d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80741
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Port fix from Alder Lake to not set/reset IOM MCTP during
D3 cold entry or exit.
Ports 5008d34003 ("soc/intel/adl: Remove IOM Mctp command from TCSS
ASL"):
> Recently as part of s0ix hang issue, it was found that sending IOM
> MCTP command as part of TCSS D3 Cold enter-exit sequence created an
> issue.
> We discovered that due to change in hardware sequence, ADL should not
> set/reset IOM MCTP during D3 cold entry or exit. This patch removes
> the bit setting from ASL file to prevent hang in the system.
> This patch also removes obsolete Pcode mailbox communication which
> is no longer required for ADL.
> BUG=b:220796339
> BRANCH=firmware-brya-14505.B
> TEST=Check if hang issue is resolved with the CL and no other
> regression
> observed
> https://review.coreboot.org/c/coreboot/+/62861
Test: build/boot drobit to Win11. Verify TCSS XHCI power management
working and USB Root Hub doesn't Code 43 in device manager
Change-Id: I40a537fd2b0c821caf282f52aaff1874f54325f1
Signed-off-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80719
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Current implementation assumes that the endpoint device is connected
directly to the PCIe Root Port, which does not always have to be true.
In a case where there is a PCIe switch between the endpoint and the
root port, the Max Payload Size capability may differ across the
devices in the chain and coreboot will not set a correct Max Payload
Size. This results in a PCIe device malfunction in pre-OS environment,
e.g. if the Ethernet NICs are connected behind a PCIe switch, the iPXE
fails to obtain the DHCP configuration.
Fix this by traversing the topology and programming the highest common
Max Payload Size in the given PCIe device chain during enumeration.
Once finished, the root port has the highest common Max Payload Size
supported by all the devices in the chain. So at the end of root port
bus scan, propagate the root port's Max Payload Size to all downstream
devices to keep Max Payload Size in sync within the whole chain.
TEST=Perform successful dhcp command in iPXE on the NIC connected to
the PCIe root port via ASMedia ASM1806 PCIe switch and again on the
NIC connected directly to the PCIe root port.
Change-Id: I24386dc208363b7d94fea46dec25c231a3968225
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77338
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
The QEMU firmware configuration driver can help initialize SMBIOS tables
using the table data that QEMU provides over the device. While doing so,
it reads from the device "file" manually using port-based IO.
Use the fw_cfg_read() helper function to read the SMBIOS-related file,
so that the driver is easier to port the driver to other architectures.
Change-Id: I18e60b8e9de34f2b0ff67af4113beec1d7467329
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80367
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Parts of the QEMU firmware configuration device driver refers to SMBIOS
related kconfig values. These depend on GENERATE_SMBIOS_TABLES and are
undefined if it isn't enabled, causing a build error.
Cover the SMBIOS-related region in this driver with an #if directive
checking the necessary config option. This is mostly to help port the
driver to non-x86 architectures where support for generating SMBIOS
tables isn't there yet.
Change-Id: I3ff388d4574eb52686a5dda3dcbc3d64a7ce6f7b
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80366
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Often times not all available resources are used on a PNP function, so
those resources not being specified is intentional, not an error. Keep
the printk but demote it so it doesn't pollute a normal cbmem log.
TEST=build/boot purism/librem_cnl (Mini v2), verify errors in cbmem
related to RTC IO/IRQ not being assigned are no longer present.
Change-Id: I3d9f22a06088596e14680190aede2d69880001fa
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80645
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Don't attempt to open a PMIO window for a resource which doesn't have
the IORESOURCE_ASSIGNED flag set, since there is no point in doing so
and there's a high likelihood that the base address is 0, which will
throw an error.
TEST=build/boot purism/librem_cnl (Mini v2), ensure no errors in cbmem
log for attempting to open a PMIO window for unaassigned resources with
base address 0.
Change-Id: Ifba14a8f134ba12d5f5e9fdbac775d4f82b4c4de
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80750
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Refer to the reference board of nivviks, and update devicetree settings
via glassway schematic of ca24a_r10_240108_v3_mb_gsen_gmr.pdf.
BUG=b:319071869
BRANCH=firmware-nissa-15217.B
TEST=Local build successfully and boot to OOBE normally.
Change-Id: Ibbb10a373bd5fa52a0833b81133517d2a088536b
Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80742
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In preparation to merging all the other HP sandy/ivy desktops in here
as variants.
Move hda_verb.c, early_init.c, gma-mainboard.ads and data.vbt into
variant directories.
Kconfig:
Move options not common to the others under the variants instead.
devicetree:
Move XHCI to variant overridetrees (8200 gen has no USB 3)
board_info.txt:
Make it more generic. It seems to be copied from 8200 SFF and
inaccurate to Z220 anyway.
TEST: BUILD_TIMELESS=1 & Don't include .config in ROM image. CMT and
SFF ROMs are (SHA1) same as before.
Change-Id: Icce22efb8d353359781db3f03c67058d8fbe11b8
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
The GNU BFD linker makes a good guess that this section should not be
loaded, however other linkers like LLVM LD need this to be made explicit
in order for the section to have the NOBITS, rather than PROGBITS
attribute set.
Change-Id: I3ca7221d10f144f608823e0b9624533780fbf335
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80735
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Starting from MT8195, MediaTek platform supports "dram adaptive" to
automatically detect dram information, including channel, rank, die
size..., and can automatically configure EMI settings. So we can just
pass a placeholder param blob to `mt_mem_init_run` by enabling this
option.
Platforms (MT8173, MT8183, MT8192) which do not support "dram adaptive"
need to implement `get_sdram_config` to get onboard DRAM configuration
info.
TEST=emerge-geralt coreboot && emerge-asurada coreboot
TEST=CONFIG_MEDIATEK_DRAM_ADAPTIVE is set to y on geralt
TEST=CONFIG_MEDIATEK_DRAM_ADAPTIVE is no set on asurada
Change-Id: I05a01b1ab13fbf19b2a908c48a540a5c2e1ccbdc
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Unfortunately, the datasheet for IT8629E is not public. Therefore, we
will use the functionally closest chip (i.e. IT8728F) as a reference
and try to reverse-engineer where necessary.
IT8629E seems to be very similar to IT8628E (again, no public
datasheets), as the chip id is 0x8628.
Known differences:
- LDN 0x08 (functionality is unknown)
- Supports 6 fans
Change-Id: I44d0377da11f0e118017caa4357012df9373b322
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80344
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Improve SSD readiness time by enabling earlier power sequencing.
Here are the two GPIOs to look for:
* GPP_A19: Power Enable
* GPP_A20: PERST
The flow is presented as `stage (GPIO PAD/Value)` for easy
understanding:
bootblock (A20/0, A19/1)
|
v
romstage (A20/1)
Ideally, we don't need SSD power sequencing at ramstage, hence, remove
the logic from ramstage.
TEST=Able to build and boot google/deku using NVMe without any problems.
S0ix and read/write from/to SSD are also normal.
Change-Id: Iedaff8a793f1ba5d2b97352b95c4dfdd2b818ebd
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80664
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Improve SSD readiness time by enabling earlier power sequencing.
Here are the two GPIOs to look for:
* GPP_A19: Power Enable
* GPP_A20: PERST
The flow is presented as `stage (GPIO PAD/Value)` for easy
understanding:
bootblock (A20/0, A19/1)
|
v
romstage (A20/1)
|
v
ramstage (A19/1, A20/1)
Ideally, we don't need SSD power sequencing at ramstage, but due to the
fact that Karis has RO locked, any change in the bootblock won't be
applicable for FSI'ed karis devices. Therefore, we're keeping the
existing ramstage power sequencing flow as is
TEST=Able to build and boot google/karis using NVMe without any
problems. S0ix and read/write from/to SSD are also normal.
Change-Id: I79171a7830b75f5c20bbe30023f2814a62743a13
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80663
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Improve SSD readiness time by enabling earlier power sequencing.
Here are the two GPIOs to look for:
* GPP_A19: Power Enable
* GPP_A20: PERST
The flow is presented as `stage (GPIO PAD/Value)` for easy
understanding:
bootblock (A20/0, A19/1)
|
v
romstage (A20/1)
Ideally, we don't need SSD power sequencing at ramstage, hence, remove
the logic from ramstage.
TEST=Able to build and boot google/ovis using NVMe without any problems.
S0ix and read/write from/to SSD are also normal.
Change-Id: I891b5a6d2c29f5d940793a4e90215265f2a4fcd8
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Improve SSD readiness time by enabling earlier power sequencing.
Here are the two GPIOs to look for:
* GPP_A19: Power Enable
* GPP_A20: PERST
The flow is presented as `stage (GPIO PAD/Value)` for easy
understanding:
bootblock (A20/0, A19/1)
|
v
romstage (A20/1)
Ideally, we don't need SSD power sequencing at ramstage, hence, remove
the logic from ramstage.
TEST=Able to build and boot google/rex0 using NVMe without any problems.
S0ix and read/write from/to SSD are also normal.
Change-Id: Idde2f7693771f1d7e3171e51232d1bb899bfe33e
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80641
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Improve SSD readiness time by enabling earlier power sequencing.
Here are the two GPIOs to look for:
* GPP_A19: Power Enable
* GPP_A20: PERST
The flow is presented as `stage (GPIO PAD/Value)` for easy
understanding:
bootblock (A20/0, A19/1)
|
v
romstage (A20/1)
|
v
ramstage (A19/1, A20/1)
Ideally, we don't need SSD power sequencing at ramstage, but due to the
fact that Screebo has RO locked, any change in the bootblock won't be
applicable for FSI'ed screebo devices. Therefore, we're keeping the
existing ramstage power sequencing flow as is.
TEST=Able to build and boot google/screebo using NVMe without any
problems. S0ix and read/write from/to SSD are also normal.
Change-Id: I0ee1fa4613178da8771c9e6b5ee871e50ea6324c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80640
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch passes the correct flag to vboot to enable SIMD crypto
acceleration on arm64 devices. This uses a core part of the ISA and
should thus be supported on all arm64 SoCs -- so we normally always
want it enabled, but there should still be a Kconfig in case a SoC wants
to use the hwcrypto interface for its own (off-CPU) crypto acceleration
engine instead. (You could also disable it to save a small amount of
code size at the cost of speed, if necessary.)
Change-Id: I3820bd6b7505202b7edb6768385ce5deb18777a4
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Updating from commit id 3d37d2aa:
2024-01-15 Makefile: Support FIRMWARE_ARCH=mock for firmware unit tests
to commit id 09fcd218:
2024-02-22 Makefile: Test compiler for -Wincompatible-function-pointer-types
This brings in 26 new commits:
09fcd218 Makefile: Test compiler for -Wincompatible-function-pointer-types
00e8c2d8 tests: Run hwcrypto RSA tests for arm64
d3387824 firmware: Add vectorized modexp() implementation for arm64 (NEON)
8856e04b tests: Stop exporting ENABLE_HWCRYPTO_RSA_TESTS to test scripts
6abd9cc0 Makefile: Separate ${ARCH_DIR}, split arm/arm64, remove symlinks
e7f567d1 test_update: Skip ifdtool-dependent tests when not available
1a0f8df8 libvboot_host: Check for undefined symbols
c0806280 vboot_host: Expose dynamic library
2ff5784d vboot: Remove 2kernel.c from vboot_host library
6e472468 Add crdyshim keygen script and devkeys
8a711468 scripts/keygeneration: Move generate_ed25519_key to common.sh
57e2092d scripts/image_signing: Call futility instead of its symlinks
0fa2ea47 scripts/image_signing/make_dev_ssh.sh: Improve parameter removal
1d32db3b Makefile: Remove genfuzztestcases from runtestscripts prerequisites
f6ff822b README: Add 'futility sign' and 'futility verify' to useful utilities
a717c83d tests: Replace vbutil_{firmware,kernel} with 'futility sign'
94c82417 *.sh: Unify indentation with 2 spaces
23d25957 utility/dev_debug_vboot: Replace vbutil_firmware with 'futility verify'
fd20901f cgpt/futility: bundle as a subtool
dccc5a31 image_signing: Add support for signing Flexor kernel image
660b6675 futility/cmd_show: Add "::verified" summary to vblock parseable output
2fcff1e4 tests/*.sh: Replace vbutil_firmware with 'futility verify'
c6b13823 make_dev_firmware.sh: Replace vbutil_firmware with 'futility show'
d260d094 firmware: 2modpow_sse2: Clean up calculation of `mu`
2596679a Add -Wint-conversion and -Wincompatible-function-pointer-types
39fb6201 futility: update: Use ifdtool to unlock ME
f8016c2b make_keyblock: change to parsing key prefix
Change-Id: Ibc6daef30092b1b31f3dd08f3aed02ba31fd12d2
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80709
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
This function turns off gpp_clk for the devices which are disabled, and
adds the code to fix up the clock configuration depending on dxio
descriptors. Also this brings glinda in line with cezanne, mendocino,
phoenix and picasso. This also prepares glinda to use the common
function gpp_clk_setup_common.
Change-Id: Id66d1b7f0d8ec9a7cbd378ad6ad7d68eeab531f0
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80415
Reviewed-by: Anand Vaikar <a.vaikar2021@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
System sleep time (SLP_S0 signal asserted) is measured in ticks, for
Alder Lake soc in 122us (i.e. ~8197Hz) granularity/ticks.
BUG=b:301854636
TEST=/sys/devices/system/cpu/cpuidle/
low_power_idle_system_residency_us" will show system idle residency time
Change-Id: I449f7ed0d9ef891ae5266e8fd784a063a75e38eb
Signed-off-by: Marx Wang <marx.wang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Add FSP header files for Twin Lake. Currently these are just a copy of
ADL-N headers.
BUG=none
BRANCH=firmware-nissa-15217.B
TEST=Build and boot Google/Yaviks with Twin Lake kconfig enabled
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I37579335c784866ebbf978e28936abf046a85b48
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Since the ACPI code is looking for VtdBars, that only appear on
Vtd devices, search for the Vtd device in devicetree.
With the previous commit the VtdBar is now exposed as a resource
on the Vtd device and thus can easily be accessed and used.
Drop the FSP HOB parsing and just use coreboot native functions.
Allows the code to work with multiple PCI segment groups.
Change-Id: I2c752dc595ac4c901f2b3a96718e256e413c76a7
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80551
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Provide a helper function to locate PCI devices on a given socket
by their PCI vendor and device IDs and functions to return
information about the current device, like the corresponding stack
and socket.
In addition add functions to return "location" information, like stack
and socket affiliation.
This becomes handy when locating devices and generating ACPI code.
Change-Id: I266360588548ba579f46b228c4d5b3ae6e39a029
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80094
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Read the VtdBar and add it to the resources of the host bridge PCI
device. The BAR is already marked as PciResourceMem32 in the parent
PCI domain.
This allows easy probing for VTD devices with enabled VtdBars in the
next commit, without the need to look up the stack HOB.
Change-Id: Id579a94e653473f3dd0dccea6e33dc64f792d028
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80550
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
If a downstream LPC device (eg, SIO function) is disabled, we shouldn't
attempt to open PMIO windows for it, as those functions often have
unset IO bases (which default to 0), resulting in false errors like:
[ERROR] LPC IO decode base 0!
TEST=build/boot purism/librem_cnl (Mini v2), verify no LPC IO errors
in cbmem log for disabled SIO functions.
Change-Id: I92c79fc01be21466976f3056242f6d1824878eab
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80646
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Early EC Sync does not need to be enabled in coreboot as EFS2 is being
enabled in the EC.
BUG=b:326152804
BRANCH=None
TEST=emerge-brox coreboot
To be tested with EC sync enabled
Change-Id: I08bdbe9f3dcea837b0b148adc137c03d3461877a
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80689
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The lower bit of the BAR might be used for something else,
like enable bits, so mask the lower 12 bits and align all
base address to 4K.
Confirmed that all BARs have a minimum alignment of 4K, so that
masking the lower bits doesn't change the reported address.
The alignment of the VTD BARs is:
- VTD_MMCFG_BASE_CSR 64 MiB
- VTD_MMIOL_CSR 1 MiB
- VTD_NCMEM_BASE_CSR 64 MiB
- VTD_TSEG_BASE_CSR 1 MiB
- VTD_BAR_CSR 4 KiB
Change-Id: I9a7b963c0074246616968dd15c147f4916297d59
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80548
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
IOAT logics are optimized out for non-IOAT platforms where
CONFIG(HAVE_IOAT_DOMAINS) as false.
This patch puts CONFIG(HAVE_IOAT_DOMAINS) check together ahead
of is_ioat_iio_stack_res() check in the corresponding if
statement to fulfill the optimization outs.
TEST=intel/archercity CRB
Change-Id: I2d16c6ff5320bc9195a1033b6d55e3d997b19b88
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80683
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add supported memory parts in mem_parts_used list, and generate SPD ID
for these parts.
DRAM Part Name ID to assign
K3KL8L80CM-MGCT 0 (0000)
K3KL6L60GM-MGCT 1 (0001)
H58G56AK6BX069 2 (0010)
H9JCNNNBK3MLYR-N6E 3 (0011)
BUG=b:319071869
BRANCH=firmware-nissa-15217.B
TEST=Run command "go run ./util/spd_tools/src/part_id_gen/\
part_id_gen.go ADL lp5 \
src/mainboard/google/brya/variants/glassway/memory/ \
src/mainboard/google/brya/variants/glassway/memory/\
mem_parts_used.txt"
Change-Id: I00ae3efe8e554f44cee5a27ac88c5d65eb95f7fb
Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80686
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com>
The cmocka problem of sanitizing XML strings has been fixed in CB:80382.
Therefore the helper macros UX_LOCALES_GET_TEXT_FOUND_TEST() and
UX_LOCALES_GET_TEXT_NOT_FOUND_TEST() can be merged into one.
TEST=make unit-tests JUNIT_OUTPUT=y -j
Change-Id: Ic3199e2a061550282fb08122943994c835845543
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80621
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Hsuan-ting Chen <roccochen@google.com>
The Rotation Matrix allows the specification of a 3x3 matrix
representing the orientation of devices, such as accelerometers.
Each value in the matrix can be one of -1, 0, or 1, indicating the
transformation applied to the device's axes.
It is expected by Linux and required for the OS to interpret
the data from the device correctly. It is used by various drivers,
mainly in `iio/accel`.
It was tested on Ubuntu, by rotating the device and verifying the
orientation was correct.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Id4a940d999a0e300a6fe21269f18bab6e3c0523c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80179
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This adds an optimization to lzma decode to also read from the boot
medium in chunks of 8 bytes if that is the general purpose register
length instead of always 4 bytes. It depends on the cache / memory / spi
controller whether this is faster, but it's likely to be either the same
or faster.
TESTED
- google/vilboz: cached boot medium
64bit before - 32bit - 64bit after
load FSP-M: 35,674 - 35,595 - 34,690
load ramstage: 42,134 - 43,378 - 40,882
load FSP-S: 24,954 - 25,496 - 24,368
- foxconn/g41m: uncached boot medium for testing
64bit before - 32bit - 64bit after
load ramstage: 51,164 - 51,872 - 51,894
Change-Id: I890c075307c0aec877618d9902ea352ae42a3bfa
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70175
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Keeping the PM timer enabled will disqualify an ADL system from entering
S0i3, and will also cause an increase in power during suspend states.
The PM timer is not required for brya boards, therefore disabling it.
Fixes: 0e90580 (soc/intel: transition full control over PM Timer from
FSP to coreboot)
This mirrors an identical commit for google/brya: 1ce0f3aab7
("mb/google/brya: Fix S0i3 regression")
TEST=Boot Linux on google/drobit, verify S0i3 counter incrementing after
exiting S0ix suspend states.
Change-Id: I644e42388c0f6127512bf52e774b79721601ecc9
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80612
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
New patches:
8be3737 cmocka: Fix assert_memory_equal() display
fb38de9 cmake: disable `-Wdeclaration-after-statement`
a74d9cd Sanitize XML strings.
4e92198 Improve c_strreplace implementation
ea6ab8b cmake: Set CMOCKA_LIBRARIES in package config for backwards compatibility
53de473 cmocka: Add overflow check for test_calloc()
e738d6e tests: Add test for test_calloc()
a01cc69 Bump version to 1.1.7
123f00e cpack: Update ignore files for source package generation
f1e1615 Bump version 1.1.6
35dd06e tests: The exception handler doesn't work on Windows
9d72cf9 tests: Raise segmantation fault
2b20a4d tests: Rename exceptions tests array
4cd1fda tests: Better match for test_exception_handler
8ad2c4e cmake: Fix path relocation in pkgconfig file for mingw
3137fa5 cmake: Do not use CMAKE_(BINARY|SOURCE)_DIR for compile_commands.json
6e9d32f Improve INSTALL.md
c4da7e1 doc: Link to the examples for mocking
b13f29b include: Update copyright year info
98c451d include: Define strtok_r with Visual Studio
4aae816 gitlab-ci: Move memory and ub sanitizer to analysis stage
559381b gitlab-ci: Move freebsd to test stage
ce43813 examples: Add missing compile and link options
5ead982 gitlab-ci: Introduce stages
5f366b6 gitlab-ci: Fix typo in fedora/mingw32 build
77476f7 gitlab-ci: Use gitlab windows runners
200393b gitlab-ci: Reformat yaml
406591a tests: Initialize 'struct stat' in test_assert_macros.c
b201da5 cmake: Fix path where to find cmocka.dll
a47b3da include: Improved call ordering documentation
61b1fb9 doc: Remove redundant words
2cc8cba Fix issue with fail_msg
TEST=make unit-tests
TEST=make unit-tests JUNIT_OUTPUT=y
TEST=(cd payloads/libpayload; make unit-tests)
TEST=(cd payloads/libpayload; make unit-tests JUNIT_OUTPUT=y)
Change-Id: I60b37021e2587cc32c755719ef40a650a1c14b59
Signed-off-by: Jakub Czapiga <czapiga@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80382
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Macros MAX_ACPI_MEMORY_AFFINITY_COUNT and MAX_SRAT_MEM_ENTRIES_PER_IMC
are ACPI table specific, and could be used across Xeon-SP SoCs.
This patch moves their definition from FSP header to Xeon-SP layer
ACPI header.
TEST=intel/archercity CRB
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Change-Id: I6c3a84b04a452bc8d4217947a7d12f050c94b56b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80629
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
IOAT is the term for the on-chip accelerator technology of
Xeon-SP. In CPX and SPR, IOAT stack is also named as DINO stack.
Different SoC has different check criteria for IOAT stacks,
this patch introduces an util function to abstract these differences
as well as cleaning up the usage of names.
TEST=intel/archercity CRB
Change-Id: I376928ad89b68b294734000678dad6f070d3c97d
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80578
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It's not needed other than for booting w/SeaBIOS, where it is already
selected by default, and enabling it with edk2 payload prevents Linux/
Windows from fully entering S0ix.
TEST=build/boot purism/librem_cnl (Mini v2), verify Win11/Linux able
to enter and exit S0ix properly.
Change-Id: I974a82bedc4e06f48ce801f2bc0c29afbd80ffcf
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80602
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
currently the HiFive Unmatched mainboard produces the following error:
```
util/crossgcc/xgcc/lib/gcc/riscv64-elf/13.2.0/rv64imafdc/lp64d/libgcc.a
(_clzsi2.o): in function `__clzdi2':
util/crossgcc/gcc-13.2.0/libgcc/libgcc2.c:690:(.text+0x1e): relocation
truncated to fit: R_RISCV_HI20 against symbol `__clz_tab' defined in
.rodata section in util/crossgcc/xgcc/lib/gcc/riscv64-elf/13.2.0/
rv64imafdc/lp64d/libgcc.a(_clz.o)
```
This is due to the fact that the libgcc.a library is compiled with the
medlow code model but the mainboards are compiled with the medany code
model.
Changing the code model of the GCC libraries to the medany code model
fixes the issue.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: If5f07ce034686dd7fec160ea76838507c0ba7fa0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80139
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: ron minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Only call fill_pds() once to prevent leaking memory. Previously it was
called for every active stack on every socket.
Only call dump_pds() once to prevent spamming the console with the same
information.
Drop the return value since it's always returning success.
Change-Id: Ifa9609e9da086dc9731556014ea9b320b270d776
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The struct map_entry has two zero'd entries due to the ifdef
being used. Do not read those entries and do not print those
entries.
Fixes a NULL string being printed along as the vendor and device
ID of the PCI device.
Change-Id: Id87ced76af552c0d064538f8140d1b78724fb833
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80546
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Since linux commit f9ba70535dc12d9eb57d466a2ecd749e16eca866
"[PATCH] Increase number of e820 entries hard limit from 32 to 128"
made in 2005 the number of e820 entries passed from the bootloader
is 128. Use the boot protocol version to check for support of
128 entries and use them if necessary.
Tested on IBM/SBP1:
Fixes booting a Linux payload when more than 32 entries are present
in the memory table, which can easily happen on a 4 socket platform.
Change-Id: Iec0a832fff091b6c3ae7050ef63e743a30618f25
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marvin Drees <marvin.drees@9elements.com>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Now that the baseboard uses chipset devicetree references, remove
all references whose value is identical to the chipset devicetree
default or the baseboard default, since they are pointless clutter.
TEST=build/boot purism/librem_cnl (Mini v2), verify output of lspci
and lsusb unchanged before and after patch.
Change-Id: I12498e7261dafd7ee59fe79926532399392d1b09
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80600
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Now that the board uses chipset devicetree references, remove all
references whose value is identical to the chipset devicetree default,
since they are pointless clutter.
TEST=build/boot purism/librem_cnl (Mini v2), run lspci and verify output
unchanged before and after patch.
Change-Id: I6c656d227962548cebde61f1d82333837adbbf56
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80599
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch eliminates coreboot from loading microcode from RW CBFS
(when the RO descriptor is locked, which indicates a fixed RO image)
because the kernel can already patch the microcode on BSPs and APs
while booting to OS.
This may be a chance to lower the burden on the AP FW side because
patching microcode on in-field devices is subject to firmware updates,
which are rarely published and, if required, must go through the
firmware qualification testing procedure (which is costly, unlike
kernel updates for ucode updates).
1. The FIT loads the necessary microcode from the RO during reset.
2. Reloading microcode from RW CBFS impacts boot time
(~60ms, core-dependent).
3. The kernel can still load microcode updates.
ChromeOS devices leverage RO+RW-A/RW-B booting. The RO's microcode is
sufficient for initial boot, and the kernel can apply updates later.
BUG=none
TEST=Verified boot optimization; in-field devices skip RW-CBFS microcode
loading when RO is locked.
Change-Id: Ia859809970406fca3fa14e6fa8e766ab16d94c8a
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Add an ACPI stub containing the TCPU device in proper scope, along with
the device status, on boards not using the DPTF driver, so that there
exists an ACPI device to be referenced from the PEPD LPI constraint
list.
Adding the stub fixes an AE_NOT_FOUND ACPI error under Linux for
_SB.PCI0.TCPU on boards with the SA thermal device enabled but which do
not use the Intel DPTF driver.
TEST=build/boot Linux,Win11 on purism/librem_cnl (Librem Mini v2).
Change-Id: I926d0461e5e0dfaf606102575c2be555a6bfb695
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
When 'reset_gpio' and 'enable_gpio' properties are defined in
overridetree.cb, the kernel will power on the FPMCU. If the device was
previously enabled the kernel will reset it.
To avoid situation in which the FPMCU is powered on and reset later we
leave the FPMCU powered off in coreboot and started by the kernel. This
is exactly what other boards do (e.g. brya).
TEST=Boot the board (e.g. karis) and make sure the FPMCU was booted once
(e.g. examine FPMCU console logs)
Change-Id: I5df8d9385be2621c02ccee2d36511a4e80ab87d1
Signed-off-by: Patryk Duda <patrykd@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80457
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Setting the EC interrupt GPIO as an APIC is able to solve many
problems that we are currently seeing:
1. Routing through the APIC make the IRQ# associated with this pin
unavailable to claim for other devices in the kernel. This is causing
EC interrupts to not work.
2. Since EC interrupt are not working, we are not able to flash the
EC from the DUT.
3. Also, the GPI_INT configuration does not allow us to set the
polarity of the GPIO, which means that it is by default set as active
high. As a result, we are seeing an excessive number of host command
interrupts to the EC. This disappears when we change the
configuration to APIC and set the polarity as INVERT.
BUG=b:319129926,b:324707182
BRANCH=None
TEST=1. After boot up, check if ec_cros_lpcs driver was successfully
registered. Look for the following string:
"cros_ec_lpcs GOOG0004:00: Chrome EC device registered"
2. Make sure can flash the EC image from the DUT
3. Make sure EC console is not getting continuous stream of host
commands.
Change-Id: I74bff88d2ddbaf1f4b085c31d582bd66e18c438a
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80467
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ashish Kumar Mishra <ashish.k.mishra@intel.corp-partner.google.com>
Configure PMC mux in devicetree. This allows PD controllers to be
used for both video and power delivery.
Tested on StarBook Mk VI with Ubuntu Lunar, by checking a USB-C PD
display can supply power and display video output.
Change-Id: I580b148b036e62fbcab50d1ca2ab1ed021cfed6b
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77664
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Configure PMC mux in devicetree. This allows PD controllers to be
used for both video and power delivery.
Tested on StarBook Mk VI with Ubuntu Lunar, by checking a USB-C PD
display can supply power and display video output.
Change-Id: I9e49612d7f165a9c9604093535f7b141a4c7048c
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79426
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Commit 977b8e83cb ("mb/emulation/qemu-aarch64: Add MMU support") adds
MMU support for ARM64 QEMU VMs, but registers a limited 1GiB region for
the DRAM, with a note that ramstage should update it.
However on recent versions of QEMU "virt" VMs, accessing RAM outside
this registered region results in an exception even if the address is
backed by actual RAM. This interferes with RAM detection which catches
these exceptions, effectively limiting us to detecting a maximum 1GiB of
RAM even if more is available.
Register the entire RAM space to MMU instead of just the 1GiB, so that
probing RAM addresses can correctly detect how much RAM we have.
Change-Id: I3afbd27b91ab37304a29a62506f965ac3cfb1c06
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80321
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
This tool doesn't have a makefile, when trying to compile it manually
with the given instructions it even fails to compile after fixing the
paths in the given command, and it references the non-existing
PCI_BUS_SEGN_BITS Kconfig symbol, so just drop this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8ca75db281a215bf3f194ab72a107f666dc0694e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79934
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Normally this would be done by the Intel GMA driver, but we can't have
two copies of the _DOD method, so generate the LCD backlight controls
here to allow use of this driver instead of the default GMA panel
definition.
TEST=build/boot Win11 on google/byra (redrix), ensure ACPI brightness
controls functional.
Change-Id: Ic8fbaf7550405f8c6f36012c8efadb8c36b968c2
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80061
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There is a modification for the x230 which uses the 2nd DP from the
dock as the integrated panel's connection, which allows using a custom
eDP panel instead of the stock LVDS display.
There are several adapter boards present on the market and all of them
use the same method of enabling the custom eDP panel.
To make this work with coreboot, the internal LVDS connector should be
disabled in libgfxinit. Additionally, VBT has been modified to keep
brightness controls functional on the adapter boards that use LVDS for
the job.
The modifications done to the VBT are:
- Remove the LVDS port entry.
- Move the DP-3 (which is the 2nd DP on the dock) entry to the first
position on the list.
- Set the DP-3 as internally connected.
This has been reported to work with the following panels:
- LP125WF2-SPB4 (1920*1080, 12.5")
- LQ125T1JW02 (2560*1440, 12.5")
- LQ133M1JW21 (1920*1080, 13.3")
- LTN133HL10-201 (1920*1080, 13.3")
- B133HAN04.6 (1920*1080, 13.3")
- B133QAN02.0 (2560*1600, 13.3")
Other eDP panels not on this list should work as well.
Change-Id: I0355d39a61956792e69bccd5274cfc2749d72bf0
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Signed-off-by: Alexei Sorokin <sor.alexei@meowr.ru>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/28950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
The HDA specification defines bits 11:8 of the Configuration Default
register as a miscellaneous field for other jack information. Only bit 8
has a standard meaning, and indicates that the jack does not have
presence detect capability. Add an enum for use in the AZALIA_PIN_DESC
macro to indicate this field. Note that many vendor firmwares set bits
11:9 to non zero values despite them being reserved in the
specification, and their meaning in these cases is not well known.
Change-Id: I70cbfca8541828a1e0c7280887060c04e4c71721
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80452
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Add an enum for the Display Type, which if set, can be used to generate
the Device ID value dynamically when the addr field is not set. This
will allow devicetree entries to specify the display type instead of
a hex value for the address which requires referencing the ACPI spec
to decode.
For an internal panel connected to the first port on the graphics chip,
currently an addr value of 0x80010400 is specified. Replacing the
'addr' field with the 'type' field and setting it to 'panel' will
generate the same DID value.
Change-Id: Id0294a14606b410a13fa22eeb240df9e409a7ca3
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80199
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Jinlon disables the eps device if no privacy screen is present, so add
a second generic gfx device 'no_eps' to handle that case, so that ACPI
backlight controls are generated either way. Add logic to ensure only
one of the two devices is active.
TEST=build/boot Win11 on google/hatch (jinlon), ensure LCD backlight
controls present and functional on device both with and without a
privacy screen.
Change-Id: Icf20de97d26c8be76c84e87d5dc6ed1a4b6dbfbc
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80178
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Puff-based Chromeboxes use a LSPCON for HDMI 2.0 output, but no driver
exists or is needed for Windows. Use the devicetree hidden keyword to
set the ACPI status to hidden for these devices, to prevent unknown
devices from being listed in Windows Device Manager.
TEST=build/boot Win11 on google/wyvern, verify no unknown devices in
Windows Device Manager for either LSPCON device.
Change-Id: Ib646e01a337b8d7baf20a886c49a8cb64d6408f3
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78040
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Improves code maintainability and potentially reduces redundancy by
using the IA common implementation.
Additionally, drop the unused macros from SoC local.
TEST=Build and boot successful on google/marasov.
Change-Id: I290fea99f04cfc9f18e5f1435ed07de42995869f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80403
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit streamlines code and strengthens common code robustness
by moving the following SoC-layer functions to the common layer:
- sa_get_mmcfg_size: Retrieves the MMIO (Memory-Mapped I/O)
configuration space size by reading offset
0x60 of the PCI Host Bridge (D0:F0).
- sa_get_dsm_size: Calculates the size of the DSM (Device Stolen
Memory) by reading offset 0x50 of the PCI
Host Bridge (D0:F0) to determine pre-allocated
memory for the IGD (Integrated Graphics Device).
- sa_get_gsm_size: Calculates the size of the GSM (Graphics Stolen
Memory) by reading offset 0x52 of the PCI Host
Bridge (D0:F0).
- sa_get_dpr_size: Determines the size of the DMA Protection
Range (DPR) by reading offset 0x5C of the PCI
Host Bridge (D0:F0).
TEST= Build and boot successful on google/screebo.
Change-Id: Ic00e001563ec6f0d737a445964c716b45db43327
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80362
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Goal is to use existing defines for all pins to make the file
self-documenting, but it would make lines too long, so I'll just
start with the NC pins.
TEST=Timeless binary did not change.
Change-Id: I6da02d7bc4c87cc8477d687b238e6e6c9aec62cd
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79733
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This function turns off gpp_clk for the devices which are disabled, and
adds the code to fix up the clock configuration depending on dxio
descriptors. Also this brings picasso in line with cezanne, mendocino
and phoenix. This also prepares picasso to use the common function
gpp_clk_setup_common.
Change-Id: Ice2e3a5a78359da9a438434c7d4aa1eca878d396
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80413
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
The name LEDLOGO comes from schematics. It's the red indicator, embedded
in the dot of the 'i' of the ThinkPad logo on laptop's lid.
In vendor firmware, this led starts fading in-and-out, or, in other
words, pulsing, when laptop is put to S3. It helps to determine whether
the laptop is in S3 just by taking a look at the logo.
As of now, coreboot doesn't do anything with this particular indicator,
it's always in enabled (on) state, which is not very convenient.
This patch fixes it.
Tested on T440p.
Change-Id: I85fb69c8c1bed8635a1b31e9b8385c7036bb46dd
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80437
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GMP and IASL don't compile with the default compiler and linker flags:
- GMP's check for the MacOS architecture hard coded x86_64 but it also
needs to know about arm64.
- iasl does some trickery on pointer alignment to save space(?), so we
need to tell clang about it.
Change-Id: If4cca9d3e55051a6121d992e5320bee1df17af9f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80435
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Leverages common SA header definitions for Host Bridge registers.
Renames DSM_BASE_ADDR_REG to BDSM and DPR_REG to DPR for brevity.
Additionally, made some minor code alignment corrections while
adding newer macros in the header file.
TEST= Build and boot successful on google/screebo.
Change-Id: I476f213d75a0978336b3749a5ba1499107eb2238
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80361
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: sridhar siricilla <siricillasridhar@gmail.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
It simply adds a comment to indicate to the reader that the
RISCV_PAYLOAD_MODE_S parameter causes OpenSBI to switch to Supervisor
mode. Otherwise it could be interpreted that coreboot switches to
Supervisor mode before starting OpenSBI (which is not the case)
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: Ib62be0c2ff59361200df4c65f9aca5f7456a0ada
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79949
Reviewed-by: ron minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Hug <philipp@hug.cx>
gpp_clk_setup code in most AMD SoC is similar and it can moved to common
code. The only thing which is SoC dependent in this function is the SoC
config, hence keep it in SoC code and move everything else in new
gpp_clk_setup_common function which is in soc/amd/common. Picasso and
Glinda don't have pcie_gpp_dxio_update_clk_req_config fixup function so
they are addressed in later patches.
Change-Id: I7d7da4bfe079f07e31212247dbf3acd14daa6447
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80285
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
TCHSCR_RST_L signal was originally being configured to 1 in gpio.c but
this was causing some leakage. Configuring it to 0 initially in
romstage fixes this. Also, make sure that EN_PP3300_TCHSCR is
initialized in romstage as well.
BUG=b:322249892
BRANCH=None
TEST=Make brox boots and touchscreen is still working
Change-Id: I5bf1901a3a40a38237b950abcb758f96aebcc1cf
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80300
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There is an existing issue for nissa where wake up from RTC wake is not working during suspend_stress_test.
The phenomenon of the issue is that after pulling out the stylus, can see an interrupt storm occurs, checking through:
"cat /proc/interrupts | grep acpi".
When the counter of interrupt is greater than a certain value, "Disabling IRQ #9" will occur, so RTC wake is not working.
Reference: https://review.coreboot.org/c/coreboot/+/65086
This patch skips the locking for GPP_F15 to allow kernel to
configure it later. The interrupt storm of acpi disappears.
BUG=b:321348117
TEST=1. cat /proc/interrupts | grep acpi
there isn't interrupt storm of acpi when pulling out stylus.
2. The stylus tools panel will pop up when pulling out it.
3. Inserts stylus can wakeup DUT after powerd_dbus_suspend.
4. Passed:
suspend_stress_test -c 2500 --suspend_min=15 --suspend_max=20
Change-Id: Ie143c43e0555d17d8a290f17637b537fba806144
Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80316
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
While introducing driver support for QEMU Cirrus display device, commit
7905f9254e ("qemu: cirrus native video init") also explicitly adds
VGA I/O functions into ramstage class when Bochs display driver support
is enabled.
Later, commit db7d04d1b7 ("qemu: Support textmode gfx init.") makes
the related config option select CONFIG_VGA, which also adds the same
file into ramstage class (among other things) in another Makefile.
Doing this twice is unnecessary. Remove the addition based on the Bochs
display driver's config option. Adding it based on CONFIG_VGA is
clearer, and future patches will try to support a Bochs display without
legacy VGA support on non-x86 architectures.
Change-Id: Ib31344e242689682d74d8a83c97b6e8027641926
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80374
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Ensure that the SerialIoDevMode config and common_soc_config registers
for each variant are programmed consistently with the devices'
enabled status in that variant's overridetree; remove and disable
extraneous devices as appropriate.
TEST=build/boot several puff variants, verify all components working
as expected, nothing missing from cbmem, lspci, etc.
Change-Id: Ib9d0cf48e405be7c00c553646651fc6f28c4e3f0
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80164
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Now that the puff baseboard uses chipset devicetree references, remove
all references whose value is identical to the chipset devicetree
default or the baseboard default, since they are pointless clutter.
TEST=tested with rest of patch train
Change-Id: Iada32111367fdc964d6126ee43e261c1feb123cf
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80163
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
In commit 30f36c35e7 ("soc/amd: rework DRAM and fixed resource
reporting") the reporting of the DRAM resources was moved from the
northbridge PCI device to the domain device. amd_pci_domain_fill_ssdt
didn't skip those DRAM resources when generation the resource producer
ranges which made Windows 10 very unhappy when it tried to evaluating
the ACPI tables causing it to reboot in a loop. To fix this, add a check
to also skip the resources that have the IORESOURCE_STORED flag set when
generating the resource producer ranges for the PCI root.
TEST=Windows 10 now successfully boots and reboots again on Mandolin
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7b6d3fd8c7f89aa4364de7963d745aef8d6b6f42
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80407
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
It seems that reducing the return type of timer_hz() to uint32_t in
CB:78888 was a bad idea... some Intel platforms actually use their raw
CPU clock for the timestamp counter which can be higher than 4GHz. This
patch reverts it back to uint64_t.
Also remove the redundant assertion in timer/generic.c since timer_us()
itself already does that check.
Cq-Depend: chromium:5274555
Change-Id: I471c7de7a28aec5bb965b23525ed579481ac8361
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Yidi Lin <yidilin@google.com>
This patch selects the DRIVERS_MTK_WIFI and USE_MTCL configs for google/yaviks as
the first platform that provides a country list to the Linux kernel via an
ACPI function (MTCL) in SSDT for MediaTek WiFi chipsets that are capable of
operating on the 6GHz band.
BUG=b:295544553
TEST=Build on similar model (PUJJO) that I have access to and verify the
flag and feature work as intended.
TEST=Add wifi_mtcls.bin blob to cbfs
TEST=Build coreboot for pujjo `emerge-nissa coreboot chromeos-bootimage`
TEST=Verify that MTCL defined in the file is present:
TEST=`acpidump -b`
TEST=`iasl ssdt.dat`
TEST=`less ssdt.dsl`
TEST=Search for MTCL
Change-Id: Iec54fc582d68b443665fceda47187c28f1a9216c
Signed-off-by: David Ruth <druth@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80305
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Subrata Banik <subratabanik@google.com>
It seems that we have some applications where we need to calculate a GCD
in 64 bits. Now, we could instantiate the algorithm multiple times for
different bit width combinations to be able to use the most efficient
one for each problem... but considering that the function usually only
gets called once per callsite per stage, and that software emulation of
64-bit division on 32-bit systems doesn't take *that* long either, we
would probably usually be paying more time loading the second instance
of the function than we save with faster divisions. So let's just make
things easy and always do it in 64-bit and then nobody has to spend time
thinking on which version to call.
Change-Id: I028361444c4048a0d76ba4f80c7334a9d9983c87
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80319
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Current pagetable implementation allows memory access up to 4GiB using
2MiB pages. If user wants to access more than 4GiB with a 2MiB page it
will require more pagetable entries. By using a 1GiB page table, users
can access more than 4GiB of memory while reducing the number of
pagetable entries. This patch enables memory access up to 512GiB through
1GiB pages by selecting USE_1G_PAGES_TLB in Kconfig.
TEST: Verified in 64bit mode boot and access above 4GiB
Change-Id: Id569ae5b50abf5b72e4db33b5e4cd802399e76ec
Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80088
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
In case where PAD_CFG_GPI_INT() is initialized with a pin value
lower to PAD_CFG_GPI_IRQ_WAKE() for same GPIO community
the set_ioapic_used() is only called for the PAD_CFG_GPI_IRQ_WAKE() pin.
Due to this the IRQ associated with PAD_CFG_GPI_INT() is found free by
find_free_unique_irq() during IRQ assignment and assigned to other pins
which causes IRQ conflicts
BUG=b:322984217
BRANCH=None
TEST=Boot test on brox, check if correct IRQ assigned to EC
Change-Id: I8c3d557e888b8d0ceac203f49b702910fba26d6d
Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80334
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In case printk does not work the current exception handler will print a
simple "!" to notify the developer that coreboot is actually there but
something went wrong.
The "!" can be quite confusing when it actually happens that printk does
not work. Since "!" doesn't really say much (if you don't know the
exception arm64 code) the developer (like me) can easily assume that
something went wrong while configuring clocks or baud rate of UART,
since the output seemingly does not seem to make sense.
This adds a little bit more output to assure the developer that what was
printed was actually intended to be printed. Therefore it prints
"EXCEPT" which assures the developer that this was intended output.
It also adds a comment above so that developer can more easily grep
for this message.
It has intentionally not been written as:
```
const char *msg = "\r\n!EXCPT!";
while (*msg)
__uart_tx_byte(*msg++);
```
because in this case the compiler will generate code that will place
`msg` somewhere in bootblock and the code will try to access this using
a memory address. In rare cases (if you link bootblock at the wrong
address) this memory address can be wrong and coreboot will not print
the message. Using individual calls to `__uart_tx_byte` ensures that the
compiler will generate code which directly puts the character bytes into
the argument register without referencing a variable in bootblock.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I2f858730469fff3cae120fd7c32fec53b3d309ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80184
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Drop the unneeded data_fabric_set_mmio_np function and the corresponding
SOC_AMD_COMMON_BLOCK_DATA_FABRIC_NP_REGION Kconfig symbol. In systems
with only one FCH, its MMIO region will be subtractively decoded and
there's no need to add a non-posted data fabric MMIO region after the
FSP/openSIL has already configured the data fabric decode windows. In
systems with more than one FCH, openSIL will already take care of
initializing everything for the additional FCH, so we also won't need to
do anything in that case. Since dropping this function also removes both
data_fabric_print_mmio_conf calls before and after adding the unneeded
non-posted MMIO region, replace the data_fabric_set_mmio_np call with a
data_fabric_print_mmio_conf call to still print the data fabric MMIO
decode regions set up by the FSP/openSIL.
TEST=Mandolin still boots successfully
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I474b6e066060abb3fe5b78505521c7782cc192ee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Updating from commit id 23d6774ab:
2024-01-16 09:47:43 +0100 - (Merge "feat(qemu-sbsa): mpidr needs to be present" into integration)
to commit id 17bef2248:
2024-02-05 23:33:50 +0100 - (Merge "feat(fvp): delegate FFH RAS handling to SP" into integration)
This brings in 142 new commits.
Change-Id: If89a3f0d32180ff7ae0a6b447687b9749dfab2ea
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Back in the days of the APIC bus, the IOAPIC IDs mustn't overlap with
the LAPIC IDs (0 to CONFIG_MAX_CPUS - 1), but since the IOAPIC and LAPIC
nowadays talk to each other via the system bus, an IOAPIC ID of 0 is
valid. When set_ioapic_id gets called with an IOAPIC ID of 0, it skipped
writing the IOAPIC ID to the corresponding IOAPIC register, so the code
was relying of the register having the expected default value of the
IOAPIC IO 0 for things to work as expected. The case of the IOAPIC ID
being 0 is the most common case in coreboot, since that's what
register_new_ioapic_gsi0 will end up doing. Fix this issue by not making
the io_apic_write call conditional on ioapic_id being non-zero. The only
southbridge that doesn't call register_new_ioapic_gsi0, calls
set_ioapic_id with the IOAPIC ID 2 for which this won't cause any
changes in behavior.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic8538f82a6b10f16eeb228669db197dc8e326ffd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80330
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Remove hardcoded B:D:F numbers for the first socket and pass the PCI
addresses to be locked within SMM by using the smm_pci_resource_store.
This allows to lock down SMM on all sockets without knowing the actual
bus topology or PCI segment group at compile time where the UBOX devices
reside on.
Tested: SMM is locked on all 4 sockets instead of just one.
Change-Id: Ica694911384005681662d3d7bed354a60bf08911
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80247
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The MTCL function provides a country list to the Linux kernel via an
ACPI function in SSDT for MediaTek WiFi chipsets that are capable of
operating on the 6GHz band. The country list is used to selectively
disable 6GHz and 5.9GHz operation based on the country the device is
operating in.
The function needs to read a binary file and send it as a package via
the MTCL method in SSDT for PCIe WiFi with MediaTek chipsets.
Change Summary:
* Add src/drivers/wifi/generic/mtcl.c to abstract functionaltity related
to MTCL
* Add write_mtcl_aml function to convert the byte data into the format
expected by the MTCL functionality in the Linux kernel.
* Add validate_mtcl function to validate that the byte data read in
from a file is in the expected format.
* Add write_mtcl_function function to read a binary file called
"wifi_mtcl".bin" from cbfs, then call validate_mtcl to verify that
it is in an expected format, and if so write the aml via acpigen
* Add config flag DRIVERS_MTK_WIFI to src/drivers/wifi/generic in order
to include MediaTek WiFi specific functionality
* Add config flag USE_MTCL which depends on DRIVERS_MTK_WIFI and
enables including the specific ACPI function defined in SSDT
* Add config flag CONFIG_MTCL_CBFS_FILEPATH which depends on
DRIVERS_MTK_WIFI which enables configuring the file to add as
"wifi_mtcl.bin"
* Add a call to write_mtcl_function to src/drivers/wifi/generic/acpi.c
to include the MTCL function in SSDT for MTK WiFi devices when
USE_MTCL is enabled.
* Add MediaTek VID to src/include/device/pci_ids.h.
BUG=b:295544553
TEST=Add Kconfig entry USE_MTCL for pujjo
TEST=Add wifi_mtcl_defaults.bin blob to cbfs
TEST=Build coreboot for pujjo `emerge-nissa coreboot chromeos-bootimage`
TEST=Verify that MTCL defined in the file is present:
TEST=`acpidump -b`
TEST=`iasl ssdt.dat`
TEST=`less ssdt.dsl`
TEST=Search for MTCL
Signed-off-by: David Ruth <druth@chromium.org>
Change-Id: I9b5e7312a44e114270e664b983626faa6cfee350
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80170
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Currently, SOC_INTEL_COMMON_BLOCK_TCSS will set MUX to disabled. The two
related options to re-configure it for either USB devices or displays,
are currently only supported by the ChromeEC. As such, any device
without the ChromeEC will boot with attached USB-C devices in a
non-functional state.
Add TCSS_HAS_USBC_OPS to make this feature configurable, and set the
default to enabled if the board features the ChromeEC.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ia848668ae9af4637fc7cffec9eb694f29d7deba9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79882
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Update the I2C configuration to match the usage such that only required
I2C controllers are enabled.
BUG=b:319390850
TEST=Build Brox BIOS image and boot to OS. Ensure that only the required
I2C controllers are enabled.
Change-Id: I9f24beb9ef587163362cc6ded88efb05be1329b9
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80303
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch switches the cbmem utility from its own IP checksum
implementation to the commonlib version (which is good because the old
one had a couple of bugs: doesn't work on odd sizes and may overflow
its carry accumulator with input larger than 64K).
Change-Id: I0bef2c85c37ddd3438b7ac6389e9daa3e4955b31
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80256
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds a bit of optimized assembly code to the ipchksum()
algorithm for x86 targets in order to take advantage of larger load
sizes and the add-with-carry instruction. The same assembly (with one
minor manual tweak) works for both 32 and 64 bit mode (with most of the
work being done by GCC which automatically inserts `rax` or `eax` in the
inline assembly depending on the build target).
Change-Id: I484620dc14679ff5ca02b2ced2f84650730a6efc
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80255
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds a bit of optimized assembly code to the ipchksum()
algorithm for arm64 targets in order to take advantage of larger load
sizes and the add-with-carry instruction. This improves execution speed
on a Cortex-A75 by more than 20x.
Change-Id: I9c7bbc9d7a1cd083ced62fe9222592243a796077
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80254
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Yidi Lin <yidilin@google.com>
This patch adds a few more test cases for the IP checksum algorithm to
catch more possible corner cases (large data with more than 64K carries,
unaligned data, checksum addition with offset, etc.).
Change-Id: I39b4d3f1bb833894985649872329eec88a02a22c
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80252
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
This patch moves the IP checksum algorithm into commonlib to prepare for
it being shared with libpayload. The current implementation is ancient
and pretty hard to read (and does some unnecessary questionable things
like the type-punning stuff which leads to suboptimal code generation),
so this reimplements it from scratch (that also helps with the
licensing).
This algorithm is prepared to take in a pre-calculated "wide" checksum
in a machine-register-sized data type which is then narrowed down to 16
bits (see RFC 1071 for why that's valid). This isn't used yet (and the
code will get optimized out), but will be used later in this patch
series for architecture-specific optimization.
Change-Id: Ic04c714c00439a17fc04a8a6e730cc2aa19b8e68
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80251
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Make the initialization of the IOAPIC(s) in the PCI root(s) common
across all AMD family 17h+ SoCs. For this the more general
implementation from the Genoa code that supports multiple PC roots is
moved to the common AMD code. All other family 17h+ SoCs are then
adapted to use the common code. For those non-Genoa SoCs, the
initialization of this second IOAPIC is moved from the northbridge
device to the domain device above to match Genoa.
Test=Both the FCH IOAPIC and the PCIe root IOAPIC are still initialized
on Mandolin
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7c0ec6ac2f11cb11e46248cceec96c1fd2a49c16
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80286
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Introduce BOARD_AMD_BIRMAN_PHOENIX_OPENSIL which selects the openSIL
based Phoenix SoC code. Since the Phoenix chip.c is different due to
some FSP-specific data structures in there that are guarded in the
openSIL case, a separate devicetree for the openSIL case is added.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I248102e92818b2d395d561a4bf2627f80906b2f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80299
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
The configuration of the PCIe clock generators in the FCH was moved from
the FSP to coreboot, since all registers are documented. This
initialization is however tightly integrated in the rest of the PCIe
init code inside the reference code. In the FSP case, this code was
manually removed. openSIL will do that part of the initialization so
that there's no coreboot-specific change needed in openSIL. This will
also avoid the problems caused by mismatching configurations done by the
coreboot code and the PCIe init part of the reference code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6d64285a301ade6860c07e62dcb1a718e7a96644
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80295
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
In the FSP case we get this info via a HOB. It's currently unclear if
we'll get a data structure for this from openSIL or if we'll end up
being able to just read the configuration fro the hardware, so add a
get_pci_routing_table stub for now to be able to build.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5003e287d6a3a9320922beaffff8a3a846531e14
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80294
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Add the SOC_AMD_PHOENIX_OPENSIL Kconfig option to be able to build the
Phoenix code using openSIL instead of FSP for initializing the hardware.
Since there's currently no publicly available openSIL code for Phoenix,
SOC_AMD_OPENSIL_STUB is selected to have the stubs added to the build
instead of the actual openSIL code. The code added by selecting
SOC_AMD_COMMON_BLOCK_ACPI_CPPC relies on getting the information it
needs via a HOB, so for only select that option in the FSP case for now.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If597ff3dc824ce832399d3efde32352b36354b21
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80293
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Add a stub implementation of the openSIL interface between coreboot and
vendorcode. This can be used to add most of the coreboot-side support
for a SoC using openSIL without the actual opnSIL code already being
publicly available. Once the corresponding openSIL code is available,
the SoC can then switch over to using the actual openSIL implementation.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9284b0cbacba6eae7e2e7e69bc687f015076c2b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80292
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Provide 3 separate functions for each openSIL time point instead of one,
so that we don't need the xSIM-api header file to be included in
opensil.h to decouple the coreboot code more form the openSIL code. This
will allow to create an openSIL stub implementation to already get most
of the coreboot-side SoC code in place before the openSIL source code is
done and released.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I969bc0862560b7254c48f04e9a03387417f328bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
When a device with no resource is passed it will keep overwriting
the current slot. Remove the conditional and allow a PCI device
to not have any resources.
This is particular useful for the next commits that makes use
of the PCI resource store to pass UBOX devices to SMM that allow
to lock-down SMM from within an SMI handler. Those devices do
not have any resources and cannot be hardcoded in SMM as their
PCI segment group and bus number varies depending on socket
count, CPU discovery and configuration.
Change-Id: I1a1b5944c97da5be6b9794c653b5159683f492e5
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80246
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Commit d252776668 ("tree: Replace And(a,b) with ASL 2.0 syntax")
replaced two instances of `And(var, mask) == 0` with `var & mask == 0`.
This expression needs parentheses - `(var & mask) == 0`.
Without parentheses, it is always false, since the masks are nonzero
(`var & (mask == 0)`; `var & 0`; `0`).
This caused brightness changes on Intel GMA to take longer than
normal since the status was never checked. The brightness would
change immediately, but another brightness change could not occur until
the first change timed out.
This was most noticeable in KDE, which waits for the brightness change
to complete before accepting another brightness up/down keypress.
Tapping brightness up/down repeatedly would take much longer to reach
max/min brightness due to many presses being ignored.
It is noticeable in GNOME as well but less obvious. Tapping brightness
up/down repeatedly would handle all keypresses, but the display's
actual brightness would lag behind and skip some intermediate steps.
I tested both Librem 13v2 and Librem 14, as far as I know this would
apply to all systems configuring brightness with Intel GMA.
Test: Verify brightness keys respond quickly again on Librem 13v2 / 14.
Change-Id: I57895e8c654c83368b452d7adfe1856c0a0341fb
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80260
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
This patch adds support for the new command-line option `-E` to
the ifdtool, which enables users (primarily factory users) to
protect GPR0.
Additionally, this patch refactors some code while adding support for
enabling GPR0 protection.
For more information on the scope of GPR0 (General Protection Range 0),
please refer to the Intel Meteor Lake-U Type 4 Client Platform SPI
Programming Guide, Document Number 768150.
BUG=b:270275115
TEST=Able to test GPR0 protection on google/rex and google/yahiko.
> ifdtool -p mtl -E image.bin -O image.bin_lock
...
Value at GPRD offset (64) is 0x83220004
--------- GPR0 Protected Range --------------
Start address = 0x00004000
End address = 0x00322fff
...
GPR0 protection is now enabled
Change-Id: I27c533ae4109c79299f4e7ff75e750d7cc64280f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80235
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
On Brox, HDA Codec used is ALC256. Add verb table for the same. Also,
add the related device tree changes for HDA related registers.
Realtek High Definition Audio Configuration-
Version : 5.0.3.1
BUG=b:317398558
BRANCH=None
TEST=verified HDA on Brox.
HDA Sound cards detected. Headphone working verified.
Device listed under sysfs as below:
cat /sys/bus/hdaudio/devices/ehdaudio0D0/chip_name
ID 256
cat /sys/bus/hdaudio/devices/ehdaudio0D0/vendor_name
Realtek
Change-Id: I1edd5aee053debe39b34048266703031c088cd00
Signed-off-by: Poornima Tom <poornima.tom@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79723
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Now that the SoC-specific memory map is reported on the domain device
instead of the northbridge device, factor out the
read_soc_memmap_resources function from root_complex.c to new memmap.c
file. For now each SoC still has its own memmap.c file, but the plan is
to eventually have a common implementation that works for all AMD family
17h+ SoCs. For that I'll still need to look closer into the differences
between the FSP and the openSIL integration though.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifd7659e9a55de9df24118b6d6c885a21dc6f14a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80272
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Since reporting the PCI ECAM MMCONF MMIO region and the IO ports for the
legacy PCI config space access is needed on all AMD SoCs, implement a
common add_pci_cfg_resources function that reports both and gets called
from amd_pci_domain_read_resources and don't report those in the SoC-
specific code any more. The only functional change is that on Genoa now
the IO ports used for the legacy PCI config space access get reserved.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibbcc2aea4f25b6dc68fdf7f360e5a4ce53f6d850
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
To make add_opensil_memmap match the other function that are directly or
indirectly called by amd_pci_domain_read_resources, pass the resource
index as a pointer instead of passing it by value and then returning the
new resource index.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6a17e488a01cc52b2dab5dd3e3d58bdf3acb554d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Introduce read_soc_memmap_resources which gets called by
amd_pci_domain_read_resources for the first domain of the SoC to report
the DRAM and PCI config space access resources to the allocator. For
Genoa this allows to use amd_pci_domain_read_resources as read_resources
in the genoa_pci_domain_ops instead of needing to wrap that call to be
able to call add_opensil_memmap for the first domain. For the other
family 17h+ SoCs the moves the reporting of the DRAM resources and the
PCI config space access resources from the northbridge device to the
domain device.
TEST=Resources still get reported on Mandolin, but now under the domain
instead of the northbridge PCI device
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib19fd94e06fa3a1d95ade7fafe22db013045a942
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80268
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Previously the code checked if the first downstream bus of the domain
was bus 0 in segment group 0 to only run certain code for the first
domain. Instead check if the domain number is 0 which should make the
code a bit easier to understand.
TEST=add_opensil_memmap still gets called exactly once on Onyx
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id8cc0078843e5e0361a53ba897cde508cee16aad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Instead of manually crafting S:B:D:F numbers for every
VTD device loop over the entire devicetree by PCI DEV IDs.
This adds PCI multi-segment support without any further code
modifications, since the correct PCI segment will be stored in the
devicetree.
Change-Id: I1c24d26e105c3dcbd9cca0e7197ab1362344aa96
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80092
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Attach UBOX stacks on newer generation Xeon-SP.
In order to use PCI drivers for UBOX devices, locating UBOX devices
by vendor and device IDs and replacing device access by specifying
S:B:D:F numbers, add a PCI domain for the UBOX stacks and let the
PCI enumerator index all devices.
Since there are no PCI BARs on the UBOX bus the PCI locator doesn't
have to assign resources on those buses.
Once all PCI devices on the UBOX stack can be located without knowing
their UBOX bus number and PCI segment the Xeon-SP code can fully
enable the multi PCI segment group support.
Test: ibm/sbp1 (4S) is able to find all PCU devices by PCI ID.
Change-Id: I8f9d52dd117364a42de1c73d39cc86dafeaf2678
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80091
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Macros can be confusing on their own; hiding commas make things worse.
This can sometimes be downright misleading. A "good" example would be
the code in soc/intel/xeon_sp/spr/chip.c:
CHIP_NAME("Intel SapphireRapids-SP").enable_dev = chip_enable_dev,
This appears as CHIP_NAME() being some struct when in fact these are
defining 2 separate members of the same struct.
It was decided to remove this macro altogether, as it does not do
anything special and incurs a maintenance burden.
Change-Id: Iaed6dfb144bddcf5c43634b0c955c19afce388f0
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80239
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
With Cr50, the GPIO EC_IN_RW is used to determine whether EC is trusted. However, With the switch to Ti50, it is determined by Ti50's boot mode. If the boot mode is TRUSTED_RO, the VB2_CONTEXT_EC_TRUSTED flag will be set in check_boot_mode(). Therefore in the Ti50 case get_ec_is_trusted() can just return 0.
The current code of get_ec_is_trusted() only checks the GPIO, which
causes the EC to be always considered "trusted". Therefore, correct the return value to 0 for TPM_GOOGLE_TI50.
BUG=b:321172119
TEST=emerge-nissa coreboot chromeos-bootimage
TEST=firmware_DevMode passed in FAFT test
Change-Id: I308f8b36411030911c4421d80827fc49ff325a1b
Signed-off-by: Qinghong Zeng <zengqinghong@huaqin.corp- partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80158
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
The current panel voltage measured at mainboard side is 1.79V and the
voltage at panel side is 1.74V. Since the panel requires 1.8V or more,
increase the circuit voltage to 1.9V to meet the panel requirement.
After adjustment mainboard side voltage is 1.89V and panel side is
1.84V.
BUG=b:322080023
TEST=Check ciri vm18 ldo voltage
BRANCH=None
Change-Id: I6d6193d45409f53c0b656890c44ddaef253c5e01
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80198
Reviewed-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It's what this function family is defined to do, we currently don't
usually run into the case (see: not too many die() instances going
around), it's more useful to try to recover, and the JPEG parser can run
into it if the work buffer size exceeds the remaining heap, whereas its
sole user (the bootsplash code) knows what to do when seeing a NULL.
Use xmalloc() if you want an allocation that either works or dies.
tl;dr: That code path isn't usually taken. Right now it crashes. With
this patch it _might_ survive. There is a use-case for doing it like
that now.
Change-Id: I262fbad7daae0ca3aab583fda00665a2592deaa8
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80226
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Multiple links are unused throughout the tree and make the code more
confusing as an iteration over all busses is needed to get downstream
devices. This also not done consistently e.g. the allocator does not
care about multiple links on busses. A better way of dealing multiple
links below a device is to feature dummy devices with each their
respective bus.
This drops the sconfig capability to declare the same device multiple
times which was previously used to declare multiple links.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Iab6fe269faef46ae77ed1ea425440cf5c7dbd49b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78328
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
CXL IIO stacks
When an IIO stack is connected with CXL cards, its bus range
will be divided by a PCI host bridge object and a CXL host
bridge object, otherwise, all its range will be owned by the
PCI host bridge object. Accordingly, CXL ACPI resources should
be only created when the IIO stack is connected with a CXL
card.
TEST=intel/archercity CRB
Change-Id: I6c1b1343991bc73d90a433d959f6618bbf59532f
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80087
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently resource allocation starts top down from the default value
0xfe000000. This does not match what ACPI reports, so adapt
CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT to reflect that.
Change-Id: I32d08ffd5bbd856b17f7ca2775c5923957d92c85
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The CRAT (Component Resource Attribute Table) isn't used on the APUs
from Renoir on and has also been marked as deprecated in version 6.5 of
the ACPI specification. So remove the 'TODO: look into adding CRAT'
comment from all SoCs from Renoir/Cezanne on.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3ea1e3678608b0ace2a1ff7fc104594e90c91476
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80227
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since the acpi_add_fsp_tables implementation is identical for all SoCs,
factor it out and move it to the common AMD FSP code. Also guard the
acpi_add_fsp_tables call in soc_acpi_write_tables with
if (CONFIG(PLATFORM_USES_FSP2_0)) to properly handle the FSP dependency.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8917a346f586e77b3b3278c73aed8cf61f3c9e6a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80225
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Factor out acpi_add_fsp_tables from the soc_acpi_write_tables function
and move the remaining parts of the soc_acpi_write_tables function to
the SoC's acpi.c. This aligns the other family 17h/19h SoCs more with
Genoa and only leaves the FSP-specific code in agesa_acpi.c which will
be made common in a following patch. I decided against also renaming
agesa_acpi.c to acpi_fsp.c, since that would have made the diff less
readable and the files get deleted in a following patch anyway.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia87ac0e77c5e673e694703b85a4bab85a34b980e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
A pointer to soc_acpi_write_tables gets assigned to the
write_acpi_tables element of the device_operations struct, so make sure
that the function has the expected function signature which in this case
means using unsigned long as type for both the 'current' parameter and
the return value.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iee45badb904fa20c6db146edbc00c40ca09361d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80218
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
As a result of hardware changes on this board, the PHY previously
routed to the PSE GbE 1 is now routed to PSE GbE 0 on the Elkhart Lake
SoC.
This patch changes the device PCI ID in the board's devicetree and
accordingly, the GPIO configuration.
BUG=none
TEST=Boot into Linux and observe whether both PSE GbE 0 and PCH GbE
are working, while PSE GbE 1 remains inactive (not listed by 'ip link')
.
Change-Id: I322371f944d15134e6f48ecd84a4026c2fced27b
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80186
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
The currently used panel type could work with 500 ms but increasing
the value to 1 second allows to use a wider range of LVDS LCD panels,
as many of them specify the delay of 1 s as minimum.
The patch has already been made for mc_ehl3 and serves the purpose of
standardization.
commit c0221aa980 ("mb/siemens/mc_ehl3/lcd_panel.c: Set LVDS re-power
delay to 1 s")
Change-Id: Ife26ff27b41298ceeed7d9aed0c1ae5553ab5ff8
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80214
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
This patch refactors GPR0 unlock function to add few important
logic as below
1. Perform GPR0 unlock if GPR0 is locked.
2. While unlocking dump the GPRD PCH strap details
3. Additionally, print the GPR start and end range if GPR0
protection is enabled.
TEST=Able to test GPR0 protection on google/rex and google/yahiko.
Exp 1: Trying to unlock GPR0 protection for a locked image
> ifdtool -p mtl -g image.bin -O image.bin_unlock
File image.bin is 33554432 bytes
Value at GPRD offset (64) is 0x83220004
--------- GPR0 Protected Range --------------
Start address = 0x00004000
End address = 0x00322fff
Writing new image to image.bin_unlock
Exp 2: Trying to unlock GPR0 protection for a unlocked image
> ifdtool -p mtl -g image.bin_unlock -O image.bin_unlock
File image.bin_unlock is 33554432 bytes
GPR0 protection is already disabled
Change-Id: Id35ebdefe83182ad7a3e735bdd2998baa0ec3ed7
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80216
Reviewed-by: YH Lin <yueherngl@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
This is causing an assertion error on the devices that don't have CNVi
enabled because CNVi is hidden behind a FW_CONFIG flag in the
overridetree now.
BUG=b:319188820
BRANCH=None
TEST=emerge-brox coreboot chromeos-bootimage
make sure we can boot to kernel on device.
Change-Id: Ifcfbc04825d4d4e7f2874a4c52f9c5cf3e657856
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80211
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This adds the ability to add a flat-binary using menuconfig.
Test: boot hifive-unmatched mainboard with the following config:
CONFIG_PAYLOAD_NONE=n
CONFIG_PAYLOAD_ELF=y
CONFIG_PAYLOAD_FILE="~/repos/linux-riscv/arch/riscv/boot/Image"
CONFIG_PAYLOAD_IS_FLAT_BINARY=y
CONFIG_PAYLOAD_OPTIONS="-l 0x82000000 -e 0x82000000"
CONFIG_COMPRESSED_PAYLOAD_LZMA=y
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I48c6b53a0c9f5b173c89f1a294a0c37fa1a58f31
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79950
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds APCB blobs to the mainboard directory and it replaces
CB:76445 Also this brings onyx_poc mainboard inline with how APCB are
included in other AMD mainboard: commit 95d05d8301 ("mb/google/zork:
Add and use APCB configuration data"), commit I352f58e0d39 ("mb/google/
skyrim: Add and use APCB configuration data") and commit I1c34528fa0f
("mb/amd/onyx_poc: Add and use APCB configuration data").
BUG=none
TEST=build/boot onyx_poc
Change-Id: I1c34528fa0fd15b847c22c995713078c60ac3873
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80204
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
As with other devices with only an external display, the Librem mini/
mini-v2 need a few extra seconds (vs an internal panel) for display init in order for the edk2 boot splash to be visible before the
default boot target is booted.
TEST=build/boot Librem Mini v2 w/edk2 payload, verify splash screen
shown / user has time to enter setup menu.
Change-Id: I9d2d514719a9918ee58cc63969b3adae44ac1632
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80182
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I2a6a4d1eb7e0d0cd32c8690caf3eff340cdb0d8c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80124
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I434940ebb46853980596f7ad55d27a62c90280fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Id09eafd293a54198aab87281f529749325df8b07
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80122
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Add an ACPI stub containing the SATA device in proper scope, along with
the device status, so that there exists a device to be referenced from
the PEPD LPI constraint list. Fixes a Windows BSOD INTERNAL_POWER_ERROR
on devices with enabled SATA ports.
TEST=build/boot Win11 on google/puff (kaisa).
Change-Id: I951c62d09609ed73079fe97ea9ce49fdee333272
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80058
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Eric Lai <ericllai@google.com>
This reverts commit d64b66ba26:
"soc/intel/cannonlake: Add missing min sleep state for thermal device."
Reverting because commit e00523aae2 ("soc/intel/cannonlake: Drop
entries from soc_acpi_name()") removed the ACPI device name for the PCH
thermal device, since there is no ACPI device defined for it. Removing
the name without removing the minimum sleep state caused an invalid LPI
entry to be created, which caused a Windows BSOD: INTERNAL_POWER_ERROR.
TEST=build/boot Win11 on google/puff (wyvern).
Change-Id: I2dfe76d5f72cde7742cee338fa24eaafb84c4604
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80057
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
When the device right below the MPIO chip driver has downstream devices
without another chip in between, those downstream devices will also have
their chip_ops entry set to vendorcode_amd_opensil_genoa_poc_mpio_ops.
To avoid adding the same MPIO descriptor again for those additional
downstream devices, make sure that the chip_info pointer of the device
isn't the same as the one of the parent device, since that's only the
case for those additional downstream devices.
TEST=Onyx still boots to the payload and the MPIO configuration reported
from the openSIL code is still the same
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Nico Huber <nico.h@gmx.de>
Change-Id: I6ba90fdc83ba089127e6722778bfef29dd480bb4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80149
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Call setup_opensil, opensil_entry, and fch_init in the right order from
the init method of the SoC's chip operations. This brings this SoC both
more in line with the other SoCs and avoids using boot state hooks for
this which also makes the sequence in which those functions are called
easier to understand. Previously the boot states were used so that
setup_opensil was run before configure_mpio which was run before
opensil_entry(SIL_TP1), but since configure_mpio is called from
setup_opensil, this is no longer necessary.
TEST=Onyx still boots to the payload and the MPIO configuration reported
from the openSIL code is still the same. The FCH init code now runs
before the resource allocation like on the AMD SoCs that rely on FSP.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic752635da5eaa9e333cfb927836f0d260d2ac049
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79985
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Instead of calling configure_mpio from the init function of the MPIO
chip struct for the first device that has this struct as chip_ops, call
if from setup_opensil. This will allow to do the calls into openSIL from
the SoC's chip_ops init function instead of having to rely on boot state
hooks. configure_mpio needs to be called after the xSimAssignMemoryTp1
call which sets up the openSIL data structures, but before the
opensil_entry(SIL_TP1) call for which the MPIO data structures need to
be filled for it to be able to initialize the hardware accordingly.
Since the vendorcode_amd_opensil_genoa_poc_mpio_ops struct now no longer
assigns configure_mpio to the init function pointer, we have to check
if the device's chip_ops pointer points to
vendorcode_amd_opensil_genoa_poc_mpio_ops instead of checking if the
chip_ops' init function is configure_mpio to match for the devices below
the MPIO chips in the devicetree.
TEST=Onyx still boots to the payload and the MPIO configuration reported
from the openSIL code is still the same
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If37077c879e266763fd2748a1a8d71c63c94729b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80148
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Since we pass va_list list to the print function, we need to use vprintk
instead of printk. Earlier versions of this code used vsnprintf and a
local buffer, but when that code was reworked to not need the temporary
buffer, it was replaced by printk instead of the correct vprintk.
TEST=Now the console output from openSIL looks as expected:
Example line from openSIL's console output when it prints the MPIO
configuration from a log some commits before this patch:
Host PCI Address - -1352681400:-1353251983:7
Same line with this patch applied looks how it's supposed to:
Host PCI Address - 0:0:0
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Varshit Pandya <pandyavarshit@gmail.com>
Change-Id: Ia931cc80dea5b7eabb75cfb19f8baa9a09cd2dbf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80203
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some variants added the generic gfx driver with an LCD device without
specifying the address, which is required for the backlight controls
to be functional under Windows. Add the address value where missing.
Address value used (0x80010400) is same as on other Brya variants which
did properly set it, and is taken from the ACPI 6.5 spec section B.4.2,
_DOD (display output device enumeration), table B-2:
- bit 31 = use the ACPI-defined (vs vendor-defined) bit scheme for bits
15-0
- bit 16 = platform firmware can detect the device
- bit 10 = display type is internal/integrated flat panel (aka LCD)
TEST=build/boot Win11 on google/brya (osiris), verify ACPI backlight
controls functional.
Change-Id: Id24e330cfb7c993d12665a704e1ca78e2e38874f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80062
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
There was a mistake in the gpio spreadsheet provided by the HW team
and the GPIO assignments for the EC INT and WAKE signals got switched
from what it was in the schematics. The correct assignments are:
GPP_D0 = EC_PCH_INT_ODL
GPP_D1 = EC_PCH_WAKE_ODL
BUG=b:311450057,b:300690448
BRANCH=None
TEST=emerge-brox coreboot
Will try to boot OS image on device and see if there are any
ec errors.
Change-Id: I02057aeb5d82218dbbe4c939d4feb87a4d3da678
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79886
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I4790adb41cb62c8c8dd44261a2926dfb6350955a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80111
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Icfdadfa6705a64655b38aca25be0818ec26429f9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80110
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ib8a2ae26ed4380592d15e1a7b2d682639413af01
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80109
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I85cda24aa7dec82d23e8a321dac03ec737f4c503
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80108
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I92f8bd7e1c9fc6e4120fb94c2299a266304e19de
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80107
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I134acc26c0a79d974a6dd0a3b257f961db7e2d86
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80106
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I5855f49984db59d786decad6142e3525b146a573
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80105
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I422cb475723006ca42be93508fb0bf4b1e4e84d3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80104
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ie7038712de8cc646632d5e7d29550e3260bf2c62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80103
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I41f8a9b5d1bdb647a915da1a5e95161b2e34df28
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80082
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I9eabe84d55fd9f434e4128866810c0e4970f2ae7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80081
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8cf3d2e2cd1b6ebe4e941ad64f27698379fef696
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80080
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Id47a5ef3c53f767d1e03c788e0022d05b21f5c28
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80079
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I358b878b97adfd9be156a5dd4a9cbaf9e81bca1a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I2f299920eb7c6d6f8888cfe5e223ae03093a1d88
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80077
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I41191f6971bdd8ecff2c56f4bfa2b57c87530b83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80076
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic80d27a963da8eddc3d1f0d9a3d59763028d4ed0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80075
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I6f502b97864fd7782e514ee2daa902d2081633a2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80074
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ib479b93b7d0b2e790d0495b6a6b4b4298a515d9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80073
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ie449267fe4fdd75110f577e1b9f748cd06140950
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Iddac15cc42532f44dda44032be0f8525f6347abd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80070
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic060f3605cd18d4bf774573c21957f626f984e2c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80069
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I552d487978906f5ea74c3d0d85373fe5b2de3f38
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80068
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I80559b7c86a8fd2583cb0335279f676e0aa0209e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80067
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ice5dadd3eaadfa9962225520a3a75b05b44518ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80066
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
The rest of the Makefiles will be renamed in following commits.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Idaf69c6871d0bc1ee5e2e53157b8631c55eb3db9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80063
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This was determined by sniffing the LPC bus while moving the hardware
wireless switch between the enabled and disabled positions on the
Latitude E6400. The vendor BIOS provides options to change which radios
the switch controls, which was used to determine the mapping between
each radio device and the command argument values.
Change-Id: I173dc197d63cda232dd7ede0cb798ab0a364482b
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77534
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
We need to disable the cnvi device when pcie wifi is enabled, so need
to use the FW_CONFIG defined in the overridetree for this.
BUG=b:311450057,b:300690448,b:319188820
BRANCH=None
TEST=This will be tested on the device when received
Change-Id: If9e861db37e321fd69c09f9b4aafa2e212f92caa
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79898
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Create the xol variant of the brya0 reference board by copying the
template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:319506033
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_XOL
Change-Id: Id60c50b70c9ab53d62ad48cfc15462f2410f9f02
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80145
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There is no need to inject this code in DSDT. Just generating a _CRS
Name in SSDT containing a resource template works well and reduces the
need to sync up on names being used to return _CRS names in DSDT.
TEST=intel/archercity CRB
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I691d7497dceb89619652e5523a29ea30a7b0fab8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
The code can now deal with stacks that have no resources so just hook
them all up.
Intel XEON-SP FSP reports all report the state of its stacks, which
comprise of PCI root bridges and their respective resources, like PCI
busses, IO and MEM resources, via HOB. Parsing all of those into native
coreboot structures makes it possible to handle those in a more native
fashion like use PCI drivers, native helper functions, ... As opposed
parsing those structures again out of the HOB each time. This makes code
reuse across the tree more feasible.
An additional advantage is that Linux does not need to redo resource
allocation since the one done by coreboot will be valid, which
potentially decreases boot time.
TEST=intel/archercity CRB
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Change-Id: Id72c6e4499e99df3b7ca821ab2893cbcc869dbcd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78332
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Although a section ".bss.ttb_buffer" is created automatically for
'ttb_buffer' with the GCC option '-fdata-sections', specify the section
name explicitly to make the name stand out to code readers, and to
reduce the chance of accidentally changing the section name by renaming
the variable.
Change-Id: I2930f238f63b555c4caa65709768afa314d9cf87
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Repo sync code recently, run command as memtioned in TEST and
found the changed for the auto-gen files.
Then correct the memory typo from K4UBE3D4AA-MGCR to K4U6E3S4AA-MGCR,
and no new for the used hex file.
BUG=b:320181366
BRANCH=firmware-dedede-13606.B
TEST=Run command "go run ./util/spd_tools/src/part_id_gen/\
part_id_gen.go JSL lp4x \
src/mainboard/google/dedede/variants/galtic/memory/ \
src/mainboard/google/dedede/variants/galtic/memory/\
mem_parts_used.txt"
Change-Id: I7c158eb7b4455cde839a335913e6a18895c12b41
Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79976
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
commit d078ef2152
("soc/intel/cmn/block/pmc: Add previous sleep state strings in log")
used SLP_TYP numbers to map ACPI sleep state value. This incorrectly
printed wrong string for prev_sleep_state during S5.
ex: after a cold reset the previous sleep state printed was
[DEBUG] prev_sleep_state 5 (S3)
This patch corrects this by using ACPI sleep state numbers for mapping
the prev_sleep_state values.
TEST=test the logs on google/rex board after cold reset
[DEBUG] prev_sleep_state 5 (S5)
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: I9bcdacc4d01a8d827a6abdf9af2b9e5d686ed847
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80144
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Issue: System hang occurred due to unhandled SPI synchronous SMI,
triggered by LOCK_ENABLE bit and WPD assertion.
Solution: Enabled SOC_INTEL_COMMON_BLOCK_SMM_TCO_ENABLE configuration
to allow the system to handle and clear SPI synchronous SMI.
BUG=b:306267652
TEST=Cold reboot test on 20 google/screebo by ODM, all passed w/o
hang.
Change-Id: Ie1f096f8eda4adcf1627e44afa517b02adddad76
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79654
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Updating from commit id e7486343d:
2023-11-28 22:48:16 +0100 - (Merge changes from topic "xlnx_fitimage_check" into integration)
to commit id 23d6774ab:
2024-01-16 09:47:43 +0100 - (Merge "feat(qemu-sbsa): mpidr needs to be present" into integration)
This brings in 150 new commits.
Change-Id: I4aefd60dcd785934286eb8f7b0defd61c73e78f7
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80045
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
WLAN has always been pcie_rp5, there is nothing on pcie_rp1. RP5 gets
promoted to function 0 (RP1's function) since no earlier functions are
enabled.
This simplifies later refactoring that will handle the FSP root port
enable flags (which were correctly set already) using the device tree
enables.
Test: Boot librem_13v2 and verify WLAN is enabled.
Change-Id: I7a724a01b5f171a16de83ff6122630e2d66557c1
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80065
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Since the romstage code is very similar between all AMD non-CAR SoCs,
factor out a common romstage implementation. All SoCs that select
SOC_AMD_COMMON_BLOCK_PM_CHIPSET_STATE_SAVE call fill_chipset_state, so
this Kconfig option can be used to determine whether to make that call.
In the FSP case, amd_fsp_early_init gets called, while in the case of an
implementation that doesn't rely on an FSP to do the initialization,
cbmem_initialize_empty gets called to set up CBMEM which otherwise would
be done inside the FSP driver code. Since only some SoCs call
fch_disable_legacy_dma_io again in romstage right after
amd_fsp_early_init, introduce the new
SOC_AMD_COMMON_ROMSTAGE_LEGACY_DMA_FIXUP Kconfig option, so that the
SoCs can specify if this call is needed or not.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4a0695714ba08b13a58b12a490da50cb7f5a1ca9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80083
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Split the SOC_AMD_PHOENIX Kconfig option into SOC_AMD_PHOENIX_BASE that
selects the non-FSP-specific options and SOC_AMD_PHOENIX_FSP that
selects both SOC_AMD_PHOENIX_BASE and the FSP-specific options. This
will help to separate the FSP-specific from the FSP-agnostic code. The
mainboards using this SoC now select SOC_AMD_PHOENIX_FSP instead of
SOC_AMD_PHOENIX.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5e95fbfd9d16930ba3e6cc497557d61adba5a6fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79983
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add get_wifi_sar_cbfs_filename(). This function uses the FW_CONFIG
for WIFI to choose the right wifi_sar hex file. Below is the file
mapping:
wifi_sar_0.hex = wifi6
wifi_sar_1.hex = wifi7
BUG=b:319302319
BRANCH=None
TEST=emerge-brox coreboot chromeos-bootimage
Change-Id: I212c80412141e7770a512bd8ccf4111963bab395
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80085
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reformat alternate dump output to show default values before read
values, and to use brackets to visually indicate which values differ
from the defaults.
old output:
Register dump:
idx val def
0x07: 0x0b (0x00)
0x10: 0xff (0xff)
0x11: 0xff (0xff)
...
new output:
Register dump:
idx def val
0x07: 0x00 [0x0b]
0x10: 0xff 0xff
0x11: 0xff 0xff
...
TEST=build/dump registers from Erying SRMJ4 w/Nuvoton NCT6796D.
Change-Id: Idef2cc136151328b114620eb297ab8fd62b71bcd
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80004
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
If CONFIG_LP_ARCH_MOCK, pass FIRMWARE_ARCH=mock when building vboot
fwlib, so that vboot's Makefile will append the correct flags to CFLAGS.
BUG=none
TEST=(depthcharge) make unit-tests -j
BRANCH=none
Cq-Depend: chromium:5182247
Change-Id: I9ead7f2f93eac5f5c3887074423fb9aa50a489c0
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79956
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
1. Describe the FW_CONFIG probe for the settings for Palutena.
- WIFI_SAR_ID_0 for AW Wi-Fi module AW-CM421NF
- WIFI_SAR_ID_1 for Intel Wi-Fi module AX211NGW
2. In contrast to the AW Wi-Fi module, the Intel Wi-Fi module needs
to load a SAR table in dedede platform.
3. For Palutena project, the SKU ID segment of Palutena is set for
"0x350000~0x35FFFF".
BUG=b:319792428
BRANCH=firmware-dedede-13606.B
TEST=build pass
Change-Id: Ic4f38928d24c4398d90df226cfe0788a30075bf2
Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79930
Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
1. Modify 6w/15w DPTF parameters based on b:290705146#comment41.
2. 6W MSR power limit_1 power (Watts) increase to 20.
3. 15W MSR power limit_1 power (Watts) increase to 20.
BUG=b:290705146
TEST=emerge-nissa coreboot chromeos-bootimage
Thermal team test pass.
Change-Id: I15fa4b8f7c7088ff56da6493659ae45572913b5a
Signed-off-by: Rex Chou <rex_chou@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79890
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Work around a romstage restriction. Globals (or static variables) cannot
be initialized to a non-zero value because there's no data section. Note
that the revision ID for stepping A0 is zero, so `pch_silicon_revision`
will no longer use the cached value for this PCH stepping. Since it is a
pre-production stepping, it is most likely not used anywhere anymore.
Change-Id: I07663d151cbc2d2ed7e4813bf870de52848753fd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49168
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
I got confused and used UFS (User Facing Side) for the User Facing
Camera (UFC) in the FW_CONFIGs. Change references of the camera from
UFS --> UFC.
BUG=b:300690448
BRANCH=None
TEST=None. The camera has not been enabled yet.
Change-Id: I4f8240ae51aad1e077f325a9eab5a2a92f1402cb
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79997
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Instead of checking if there is more than one PCI segment group and
erroring out in that case during the build, add this requirement as a
dependency to the GENERATE_MP_TABLE Kconfig option. The mpspec.c source
file only gets included in the build if GENERATE_MP_TABLE is selected.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ie532a401ad0161890d0fb4ca2889af022d5f6b47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79994
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Always use the high-level API region_offset() and region_sz()
functions. This excludes the internal `region.c` code as well
as unit tests. FIT payload support was also skipped, as it
seems it never tried to use the API and would need a bigger
overhaul.
Change-Id: I18f1e37a06783aecde9024c15876b67bfeed70ee
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79955
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Accessing RAM before mmu initialized is time consuming. During mmu
initialization, `mmu_init()` and `mmu_config_range()` write logs to the
console buffer and contribue the extra boot time.
This patch adds a kconfig option to move `mtk_mmu_init()` to
`bootblock_soc_early_init()`. When `EARLY_MMU_INIT` is enabled, mmu is
initialized before `console_init()` ready. So `mmu_init()` and
`mmu_config_range()` won't write logs to the console buffer and save the
boot time.
It saves about 65ms on Geralt with EARLY_MMU_INIT enabled.
Before:
0:1st timestamp 239,841 (0)
11:start of bootblock 239,920 (79)
12:end of bootblock 323,191 (83,271)
After:
0:1st timestamp 239,804 (0)
11:start of bootblock 239,884 (80)
12:end of bootblock 258,846 (18,962)
BUG=b:320381143
TEST=check timestamps in cbmem
Change-Id: I7f4c3c6c836f7276119698c6de362794cf4222a6
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Gothrax cannot boot into OS with a kernel loading failure.
Update eMMC DLL values to improve initialization reliability
How to get these values:
- Sending different speed TX/RX command/data signal to eMMC and check
the response is successful or not.
- Collecting above results from each eMMC model that project used.
- Analysing logs to provide a fine tuned DLL values.
BUG=b:310701323
TEST=Cold reboot stress test over 2500 cycles
Change-Id: Ie36cc9948e3d5dee46385e584baad141a249be79
Signed-off-by: Simon Yang <simon1.yang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79220
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
These are specific to the brox board, so moving devices to the brox
variant.
BUG=b:311450057,b:300690448,b:319058143
BRANCH=None
TEST=emerge-brox coreboot chromeos-bootimage
will check if this helps detect the storage device in the factory
Change-Id: I18d096040c293abfd4cd0b1bb5f50ba6dcc2e183
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79995
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Brox project has FW_CONFIG bits already set up in the project file for
the retimer and for storage, so make sure that the brox device tree
matches those settings.
BUG=b:311450057,b:300690448,b:319058143
BRANCH=None
TEST=emerge-brox coreboot chromeos-bootimage
will check if this helps detect the storage device in the factory
Change-Id: Iaf43003b7e8210eee9016d779839d7048c15825f
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79854
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Updating from commit id 32402941:
2024-01-08 19:53:43 +0000 - (treewide: Put the static keyword at the beginning of declarations)
to commit id 3d37d2aa:
2024-01-15 06:21:04 +0000 - (Makefile: Support FIRMWARE_ARCH=mock for firmware unit tests)
This brings in 2 new commits:
3d37d2aa Makefile: Support FIRMWARE_ARCH=mock for firmware unit tests
ffe3fb20 make_keyblock: Add support for omitting extension
Change-Id: I30425f0c50caf24800661568da8f72f6b4418d9c
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80006
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
There is a mismatch in how PCI memory resources are allocated on Apollo
Lake with the current configuration. While the ACPI code expects
resources to be below PCR_BASE_ADDRESS (i.e. PMAX), the coreboot C code
allocates them above, leading to the following error messages on Linux:
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xd0000000 window]
pci_bus 0000:00: root bus resource [mem 0x280000000-0x7fffffffff window]
pci 0000:00:13.1: can't claim BAR 14 [mem 0xdeb00000-0xdebfffff]: no compatible bridge window
pci 0000:00:13.1: can't claim BAR 15 [mem 0xdec00000-0xdecfffff 64bit pref]: no compatible bridge window
pci 0000:00:13.1: BAR 14: assigned [mem 0x80000000-0x800fffff]
pci 0000:00:13.1: BAR 15: assigned [mem 0x281300000-0x2813fffff 64bit pref]
Tested on up/squared with Linux kernel version 6.1.0.
Fix this by setting the DOMAIN_RESOURCE_32BIT_LIMIT to PCR_BASE_ADDRESS,
and by moving the UART base address into the expected range.
Thanks to Nico Huber for the help in writing this patch.
Change-Id: I3a805beb47ab4d19cf8dfce0942485e7982861b1
Signed-off-by: Reto Buerki <reet@codelabs.ch>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79957
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add initial support for multiple PCI segment groups. Instead of
modifying secondary in the bus struct introduce a new segment_group
struct element and keep existing common code.
Since all platforms currently only use 1 segment this is not a
functional change. On platforms that support more than 1 segment the
segment has to be set when creating the PCI domain.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ied3313c41896362dd989ee2ab1b1bcdced840aa8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79927
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
The xeon_sp code worked around the coreboot allocator rather than using
it. Now the allocator is able to deal with the multiple IIOs so this is
not necessary anymore.
Instead do the following:
- Parse the FSP HOB information about IIO into coreboot PCI domains
- Use existing scan_bus and read_resource
- Handle IOAT stacks with multiple domains in soc-specific code
TEST=intel/archercity CRB
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Nico Huber <nico.h@gmx.de>
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Change-Id: Idb29c24b71a18e2e092f9d4953d106e6ca0a5fe1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
The PCIE MMCONFIG base address value and size is updated correctly to
access the PCIE config space registers.
TEST=Verified that PCIE enumeration takes place in boot log
and config space registers are accessible.
Change-Id: Ifa8377df7a2973a88d414c217b5ed114c8ae5cc3
Signed-off-by: Anand Vaikar <a.vaikar2021@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79832
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Describe the USB 'current' settings based on MRC.bin that converts
the USB trace length to a predefined register value.
MRC.bin decides which setting to use based on the PC type, mobile
or desktop, and the trace length.
Tested: Lenovo X220 still boots.
Change-Id: I79d35ca16818daec03ee7f464349a4c8ee0f78e4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Currently autoport fills in USB current '0' if the detected setting
isn't one of the known settings. This works as 0 is a valid setting
from C point of view, but it's not supported on desktop PCs and on
mobile platform results in the lowest possible USB PHY gain. Thus
this might cause instabilities as the original firmware had stronger
USB drive currents and gain settings.
Add more known USB current fields to the map and generate a FIXME
as comment when the detected current isn't one of the known entries
instead of defaulting to 0.
Change-Id: I48f4d636ce3401ba188f5519b5ff45fccf13f080
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78828
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
According to BWG the USB current setting 0 should not be used for
desktop boards. As autoport defaults to 0 if the USB current doesn't
match one of the lookup table entries most of the desktop boards in
tree have such a setting. Print an error to alert users of such boards
to update the USB current settings.
Tested: Lenovo X220 still boots.
Change-Id: If76e9126b4aba8e16c1c91dece725aac12e1a7e9
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78827
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
A recent update broke installation of commonlib headers with a relative
path in $(DESTDIR), which is the default. Make sure to install into the
right location in case we changed the current directory.
Change-Id: I61fa4aa0ecd0f81ee03ff89183e1b65e7875dea6
Signed-off-by: Nico Huber <nico.h@gmx.de>
Fixes: ee53dfd07d (libpayload: Remove shell for loops in install Makefile target)
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79908
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The MIPI panel BOE_NV110WUM_L60 will be used for Ciri, enable it.
Also remove the `mdelay(10)` after mtk_i2c_bus_init, because MTK
confirms this is not needed. Add mdelay(2) between VDD18 and VSP/VSN
to meet the panel datasheet.
BUG=b:308968270
TEST=Boot to firmware screen
BRANCH=None
Change-Id: I0a04f062f81c543d38716d7ff185b5633c1aa3a9
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78957
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Always use the high-level API region_offset() and region_sz()
functions. This excludes the internal `region.c` code as well
as unit tests. FIT payload support was also skipped, as it
seems it never tried to use the API and would need a bigger
overhaul.
Change-Id: Iaae116a1ab2da3b2ea2a5ebcd0c300b238582834
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79904
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
As a preparation for the multi PCI segment group support, use
acpigen_write_BBN to generate the _SEG method that returns the segment
group number of the PCI root. Until the multi PCI segment group support
is enabled in coreboot, it will always return 0.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2a812dcc564c5319385e9ad482d29b2984a71b8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79924
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This is needed for NVMe to work when PCIe device is connected to the
CPU side of RPL soc.
BUG=b:311450057,b:300690448, b:319058143
BRANCH=None
TEST=Tested on device and was able to boot to the OS
Change-Id: Ic8a1fdcedf2ec6c7bf1dd00e02ef7c13e9338aac
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79857
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
This needs to be disabled for RPL otherwise we'll hit the assertion:
[EMERG] ASSERTION ERROR: file 'src/soc/intel/alderlake/fsp_params.c', line 1066
There is a comment in the referenced file/line in the assertion that
says that "C state demotion must be disabled for Raptorlake J0 and Q0
SKUs." So, disabling it.
BUG=b:311450057,b:300690448
BRANCH=None
TEST=Tested that we didn't hit this assertion on the device after this
change
Change-Id: Ib7b2484de2d84c980550fd951f1e30efab0ee197
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79855
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Historically resource allocation in coreboot was 32bit x86 thing. To
remain compatible with this behavior (e.g. to keep 32bit payloads
happy), resource allocation limits resources to 32 bits unless
explicitly overridden. However this behavior is not always appropriate:
e.g. on non x86 platforms the PCIe mem decode window could be above 4G.
Another case on x86 is where the decode window(s) below 4G are not
adequate for fitting all resources and the payload is 64bit
capable (e.g. Linux).
This adds a Kconfig flag to override the behavior to limit resources to
32bit by default and to allocate resources according to the real
hardware limits.
TEST=intel/archercity CRB
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I01218a8a3efc4a5f8ba344808949ca6b8898525f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78331
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
As per Intel Meteor Lake SPI programming doc, the BIOS region should
have a read access enabled for device expansion 2 region
(aka region 9).
This patch ensures that BIOS region is able to read the device
expansion 2 region for Intel Meteor Lake platform as known as
SPI padding region.
BUG=b:274356894
BRANCH=firmware-rex-15709.B
TEST=Able to flash screebo AP FW image using flashrom on DUT.
Without this patch:
> flashrom -p internal -r /tmp/bios.rom
flashrom 1.4.0-devel on Linux 6.1.67-09255-ge8ae3115f8b0 (x86_64)
...
...
Found Winbond flash chip "W25Q256JW_DTR" (32768 kB, Programmer-specific)
on internal.
Reading flash... Transaction error between offset 0x0072f000 and
0x0072f03f (= 0x0072f000 + 63)!
read_flash: failed to read (0x72f000..0x7fffff).
Read operation failed!
FAILED.
FAILED
With this patch:
> flashrom -p internal -r /tmp/bios.rom
flashrom 1.4.0-devel on Linux 6.1.68-09294-g001fdda5287d (x86_64)
...
...
Found Winbond flash chip "W25Q256JW_DTR" (32768 kB, Programmer-specific)
on internal.
Reading flash... done.
SUCCESS
Change-Id: I18c44aa9a0f890f01a889247da118b69a58936e8
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Eric Lai <ericllai@google.com>
driver
Since DRIVERS_I2C_SX9324_SUPPORT_LEGACY_LINUX_DRIVER value on dedede
cannot meet DRIVERS_I2C_SX9324 on nissa, need to update the tuning
value. Update proximity sensor fine tune value with quandiso EVT
machine.
BUG=b:314550601
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot and verify p-sensor
watch 'cat /sys/bus/iio/devices/iio:device*/*raw'
Change-Id: I5fc3bc5876594f2df79d628bd986113d37087c3d
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79724
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
The APU boards have an NCT5104D chip on the LPC bus that implements some
serial ports that have the legacy IO port interface to the host and
doesn't describe this in the ACPI tables, so select
HUDSON_FADT_LEGACY_DEVICES to have the corresponding FADT bit set. Since
this chip doesn't provide an 8042-compatible keyboard controller, don't
select HUDSON_FADT_8042.
TEST=Surprisingly, this doesn't seem to make a difference to the Linux
kernel; is creates all ttyS[0..3] devices with and without this patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8872b8c3d6e0610630ba17a0fccdcf8cebb1d3c0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79894
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
HUDSON_LEGACY_FREE controlled both if the legacy devices and the 8042
flags are set in the IA-PC boot architecture filed of the FADT. Since
some systems have legacy devices on the LPC bus, but no 8042-compatible
keyboard controller, replace this option with the two new options
HUDSON_FADT_LEGACY_DEVICES and HUDSON_FADT_8042.
TEST=The FACP table doesn't change on APU2
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id4ff85630c90fb2ae8c8826bbc9049a08668210d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79893
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Use pm_acpi_smi_cmd_port() to get the APMC trigger IO port instead of
using the hard-coded APM_CNT define. This makes sure that the correct
APMC IO port will be used even when a system doesn't use the default
APM IO port.
TEST=SMMSTORE V2 still works with the EDK2 payload on Careena
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icb79c91cfcd75db760bd80cff7f3d0400d1f16cd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79568
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use call_smm instead of open-coding the same in inline assembly
functionality in init_store. The local ebx variable is dropped, since
call_smm takes a pointer to the argument instead of an integer, and the
local eax variable is renamed to res to make the code a bit clearer,
since the EAX register is used for both passing the command and
subcommand to the APMC SMI handler and to get the return value from the
handler.
TEST=SMMSTORE V2 still works with the EDK2 payload on Careena
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib14de0d120ae5c7db3bb7a529837ababe653e1a2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Moving it into the .ttb_buffer section will accidentally set the LOAD
flag. So, move it back to .bss.ttb_buffer section to prevent the binary
size bloating.
BUG=b:248610274
TEST=Make sure the device is still bootable with this change.
BRANCH=none
Cq-Depend: chromium:5173448
Change-Id: I9bb08878dd4be01d9ed3f96933f774dd6296f76e
Signed-off-by: Yi Chou <yich@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79800
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Tell binaryPI to not disable the LPC decodes for the IO ports used by
the serial ports on the Super I/O chip during the AmdInitReset binaryPI
entry point. Checked the Stoneyridge binaryPI source code which is
closely enough related to be reasonable sure that this option only
controls which LPC decode bits get cleared and won't have any other side
effects.
TEST=Now the full console output from the APU2 board gets printed on the
serial console.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Change-Id: I91ef4423bd7bf6c1d7a175336f0f89479f2cde02
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79852
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Now that Stoneyridge also reports the GNB IOAPIC on the domain and with
the IOMMU_IOAPIC_IDX resource index the common AMD MADT code expects, we
ca switch over to using this common code on Stoneyridge too.
TEST=The resulting MADT doesn't change on Careena
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If4ce71a47827e144c4d4991152101650904901f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79885
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Move the GNB IOAPIC resource from being reported in the GNB PCI device
to the domain and use IOMMU_IOAPIC_IDX as resource index, so that the
common AMD MADT code will be able to find the resource.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If6e9aaf4a3fa2c5b0266fd9fb8254285f8555317
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Move the IOMMU_IOAPIC_IDX define from amdblocks/data_fabric.h to
amdblocks/ioapic.h which is both a more logical place for it to be and
this is also a preparation to use the common AMD MADT code for the
Stoneyridge SoC.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iaa20e802cf5ed93f0d05842abb1aea0d43b1cac4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This commit adds support for showing different logos on the ChromeOS
firmware splash screen based on the device model (between
Chromebook-Plus and regular ChromeOS devices like Chromebook and
Chromebox). This allows OEMs to customize the branding on their
devices.
This patch also introduces three new Kconfigs:
- CHROMEOS_FW_SPLASH_SCREEN
- CHROMEOS_LOGO_PATH
- CHROMEBOOK_PLUS_LOGO_PATH
which allow users to enable the fw splash screen feature in the
vendorcode. Previously, we were using the BMP_LOGO Kconfig in
drivers/intel/fsp2_0, but we didn't want the top level Kconfigs to be
located inside the architecture specific files.
BUG=b:317880956
BRANCH=None
TEST=emerge-rex coreboot chromeos-bootimage
verify that FW splash screen appears
Change-Id: I56613d1e7e81e25b31ad034edae0f716c94c4960
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79775
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Removes unnecessary HAVE_FSP_LOGO_SUPPORT config from google/rex
baseboard. Intel Meteor Lake SoC now selects this config
automatically for supported platforms.
BRANCH=firmware-rex-15709.B
TEST=Able to build and boot google/rex and intel/mtlrvp.
Change-Id: I89bdd54cb73b11f74db2927a5eb86ab826c60517
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79860
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enables FSP logo support for Meteor Lake SoC config, covering
both Intel Meteor Lake RVP and ChromeOS devices.
Applies HAVE_FSP_LOGO_SUPPORT configuration only for platforms
with native FSP support.
Ensures successful builds and boots for google/rex and intel/mtlrvp.
BRANCH=firmware-rex-15709.B
TEST=Able to build and boot google/rex and intel/mtlrvp
Change-Id: Ic99bfdc2d33db48bdb015525981c1ef76df8203b
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79859
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
The acpi_fill_madt implementation from the Genoa PoC also works for the
other AMD SoCs that select SOC_AMD_COMMON_BLOCK_DATA_FABRIC_DOMAIN, so
factor out this function to the common AMD ACPI code and change those
other SoCs to use the new common functionality instead of having their
own implementations.
The old code on the single-domain SoCs used the GNB_IO_APIC_ADDR base
address to create the MADT entry for the additional IOAPIC in the root
complex. The new code iterates over all domains and looks for a resource
with the IOMMU_IOAPIC_IDX index in each domain and if it finds it, it
creates an MADT entry for that IOAPIC. This resource is created earlier
in the boot process when the non-PCI resources are read from the IOHC
registers and reported to the allocator.
TEST=The resulting MADT doesn't change on Mandolin
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4cc0d3f30b4e6ba29542dcfde84ccac90820d258
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79861
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The call_smm function is currently unused and the inline assembly code
for more or less the same functionality in drivers/smmstore/ramstage is
both a bit easier to understand since it uses the register names in the
'outb' instruction instead of positional arguments, and also tells the
compiler that this piece of code might change global memory. Having too
much in the clobber list might only have some performance impact, which
should however be negligible compared to the SMI handler being called,
while missing something in the clobber list might cause hard to debug
problems.
This is a preparation to make drivers/smmstore/ramstage use call_smm
instead of having its own inline assembly implementation for this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I73837cab75429014897486b38a5c56f93a850f96
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79827
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
This partially reverts commit f493857c9b ("mb/google/brya/var/*: Set
dGPU/LAN/WLAN device type to generic"). Setting the WLAN device type to
generic broke ACPI SSDT table definition, so set it back to pci.
BUG=b:318576073
TEST=build/boot google/nissa (pujjo), verify WLAN ACPI SSDT tables
contain the appropriate device entry.
Change-Id: If5dad9deb040c8cb0c507e11726f0ba44ccb2909
Signed-off-by: David Ruth <druth@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79794
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
The Hudson southbridge code for the AMD binaryPI SoCs had its own ACPI
enable and disable APMC command numbers that didn't match the common
defines in coreboot, so use the common define here to be consistent with
the command numbers in the corresponding FADT fields. Since the only SoC
that still would use this code doesn't select HAVE_SMI_HANDLER, this
won't fix any observable bug, but better fix this before anyone possibly
runs into this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5e596071e1b5269b616b7a93151648cb86ae77bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79848
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
This fixes the following compile error when trying to build the APU2
board with HAVE_SMI_HANDLER selected and the NO_SMM select removed:
In file included from src/soc/amd/common/block/gpio/gpio.c:8:
src/include/gpio.h:6:10: fatal error: soc/gpio.h: No such file or directory
6 | #include <soc/gpio.h> /* IWYU pragma: export */
| ^~~~~~~~~~~~
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie06044b12f5cbcc55a2706ec566afd2eb294c62b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79846
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The sequences of configure_display() are similar on MediaTek platforms.
The sequences usually involve following steps:
1. Setup mtcmos for display hardware block.
- mtcmos_display_power_on()
- mtcmos_protect_display_bus()
2. Configure backlight pins
3. Power on the panel
- It also powers on the bridge in MIPI DSI to eDP case.
4. General initialization for DDP(display data path)
5. Initialize eDP/MIPI DSI accordingly,
- For eDP path, it calls mtk_edp_init() to get edid from the panel
and initializes eDP driver.
- For MIPI DSI path, the edid is retrieved either from the bridge or
from CBFS (the serializable data), and then initializes DSI driver.
6. Set framebuffer bits per pixel
7. Setup DDP mode
8. Setup panel orientation
This patch extracts geralt/display.c to mediatek/common/display.c and
refactors `struct panel_description` to generalize the display init
sequences. configure_display() is also renamed to mtk_display_init().
TEST=check FW screen on geralt.
Change-Id: I403bba8a826de5f3fb2ea96a5403725ff194164f
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79776
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In order to comply with the more recent style of declarations, put the
static keyword at the beginning.
Fixes following GCC error when the related flag is set:
error: 'static' is not at beginning of declaration [-Werror=old-style-declaration]
Change-Id: Ida683319f7a0c428a9e4808821075abdd9fcb504
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79856
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Updating from commit id 7c3b60bb:
2023-12-21 20:34:49 +0000 - (firmware/2lib: Use SSE2 to speed-up Montgomery multiplication)
to commit id 32402941:
2024-01-08 19:53:43 +0000 - (treewide: Put the static keyword at the beginning of declarations)
This brings in 4 new commits:
32402941 treewide: Put the static keyword at the beginning of declarations
242d198b crossystem: Use external tool the clear the TPM
c8a0802f tests: Remove unnecessary vb2_verify_fw.c from TEST20_NAMES list
706088b8 tests: Test HW crypto RSA signature verification
Change-Id: I667376dfc3021fa6d213e3d89917ee228fd14a28
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
A following error occurred when I commit, it seems that the extra `\`
after `\.md$` is unnecessary.
File Binary file src/mainboard/google/guybrush/data.apcb matches has
lines ending with whitespace.
File Binary file src/mainboard/google/skyrim/data.apcb matches has
lines ending with whitespace.
File Binary file src/mainboard/google/zork/data.apcb matches has
lines ending with whitespace.
test failed
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: I315a37ccc3c6ebb67f7a250402549761c699dd1b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79782
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Introduce the HAVE_CONFIGURABLE_APMC_SMI_PORT Kconfig option that when
not selected will result in a default implementation of
pm_acpi_smi_cmd_port to be included in the build that returns APM_CNT.
SoCs that provide their own pm_acpi_smi_cmd_port implementation, need to
select this Kconfig option.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iaceb61b0f2a630d7afe2e0780b6a2a9806ea62f9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Commit 850b6c6254 ("soc/amd/picasso: add eMMC MMIO device to
devicetree") broke both S3 resume on Morphius SKUs that use an NVMe SSD
instead of an eMMC and boot on the currently out-of-tree ASRock X370
Killer SLI board. In the latter case, commenting out the
power_off_aoac_device call inside the emmc_enable function fixed things.
TEST=This fixes S3 resume on Morphius with NVMe SSD and an equivalent
change discussed in the patch mentioned above that caused the regression
also fixed boot on the ASRock board.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Change-Id: Id976734c64efe7e0c3d8b073c8009849be291241
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Enable x86_64 support for MRC.bin:
- Add a wrapper function for console printing that calls into
long mode to call native do_putchar
- Remove Kconfig guard for x86_64 when MRC is being used
Tested: Booted Lenovo X220 using mrc.bin under x86_64 and
MRC is able to print to the console.
Change-Id: I21ffcb5f5d4bf155593e8111531bdf0ed7071dfc
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Add another mode_switch assembly function to call x86_64 code from
x86_32 code. This is particullary useful for BLOBs like mrc.bin or
FSP that calls back into coreboot.
The user must first wrap all functions that are to be called from
x86_32 using the macro prot2lm_wrapper. Instead of using the original
function the wrapped functions must be passed to the x86_32 BLOBs.
The assembly code assume that 0-3 32bit arguments are passed to
the wrapped function.
Tested:
- Called x86_64 code from x86_32 code in qemu.
- Booted Lenovo X220 using x86_32 MRC using x86_64 console.
Change-Id: Ib625233e5f673eae9f3dcb2d03004c06bb07b149
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79753
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This patch ensures `chromeos_get_factory_config()` returns an
unsigned integer value because factory config represents
bit-fields to determine the Chromebook Plus branding.
Additionally, introduced safety measures to catch future
"factory_config" bit-field exhaustion.
BUG=b:317880956
TEST=Able to verify that google/screebo is branded as
Chromebook Plus.
Change-Id: I3021b8646de4750b4c8e2a2981f42500894fa2d0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79769
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
On ChromeOS devices with updateable CSE firmware, the GPR0 (Global
Protected Range) register is used to ensure the CSE RO is write
protected even when the FLMSTR-based protection is temporarily disabled
by coreboot to allow updating the CSE RW. For more details see
Documentation/soc/intel/cse_fw_update/cse_fw_update.md
Therefore to allow modifying the CSE firmware from the CPU, the
descriptor must have both the FLMSTR-based protection disabled (which
can be done using ifdtool --unlock), and GPR0 disabled.
Add an ifdtool option for disabling GPR0. For now I've added support for
all platforms for which I have the SPI programming guide. Support for
more platforms can be added in the future if needed.
BUG=b:270275115
TEST=Run `ifdtool -p adl -g image.bin -O image-unlocked.bin` on a locked
craask image, check the GPR0 field is set to 0.
Change-Id: Iee13ce0b702b3c7a443501cb4fc282580869d03a
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79788
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To verify the boot chain, we will need to extend the PCR with the
firmware version. And the server will be able to attest the firmware
version of devices.
The "firmware version" here is the RW firmware anti-rollback version,
determined by the ChromeOS's signing infra, and will be verified in
vb2api_fw_phase3, by comparing it with the version stored in the TPM.
This version will be increased when there is critical vulnerability
in the RW firmware.
According to [1], PCRs 8-15 usage is defined by Static OS. Therefore
PCR_FW_VER is chosen to be within that range. Ideally the existing
PCR_BOOT_MODE and PCR_HWID should also be allocated in the same range,
but unfortunately it's too late to fix them. Because PCRs 11 and 13
have been used for other purposes in ChromeOS, here PCR_FW_VER is set
to 10.
[1] https://trustedcomputinggroup.org/wp-content/uploads/TCG_PCClient_PFP_r1p05_05_3feb20.pdf
BUG=b:248610274
TEST=Boot the device, and check the PCR 10
BRANCH=none
Signed-off-by: Yi Chou <yich@google.com>
Change-Id: I601ad31e8c893a8e9ae1a9cdd27193edce10ec61
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79437
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In DDR3 DLL-Off mode is an optional feature advertised by SPD.
Honor the SPD and only use DLL-Off mode when all DIMMs on the
same channel indicate support for it.
The same is done on MRC.bin.
Tested on Lenovo X220: Still boots fine.
Change-Id: Ief4bfb9e045cad7ff9953f6fda248586ea951a52
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79758
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To avoid code duplication and to also bring the mainboards using the
Picasso SoC more in line with Cezanne and newer, factor out the SoC-
specific code from the mainboard's dsdt.asl files to the SoC's soc.asl.
TEST=Timeless builds result in identical images for Bilby, Mandolin, and
Zork/Morphius
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id4ed3a3d3cb55c8b3b474c66a7c1700e24fe908e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
This patch introduces the 512KB SI_EC FMAP region for storing the EC
firmware, a necessary addition to support EC chips without internal
flash memory.
As a testing platform, the MTLRVP Chrome SKU is utilized in conjunction
with the Microchip EC1723, and the changes are verified.
Cq-Depend: chrome-internal:6691498
Cq-Depend: chrome-internal:6741356
BUG=b:289783489
TEST=build "emerge-rex coreboot chromeos-bootimage" is successful.
changes are verified.
EC Log:
23-11-06 17:46:49.564 --- UART initialized after reboot ---
23-11-06 17:46:49.564 [Image: RO, mtlrvpp_m1723_v3.5.142816-ec:6596a3,
os:f660f7,cmsis:42cf18,picolibc:6669e4]
23-11-06 17:46:54.609 D: Power state: S5 --> S5S4
23-11-06 17:46:54.620 D: Power state: S5S4 --> S4
23-11-06 17:46:54.620 D: Power state: S4 --> S4S3
23-11-06 17:46:54.642 I: power state 10 = S3S0, in 0x0087
23-11-06 17:46:54.642 ec:~>: Power state: S3S0 --> S0
Change-Id: I788dbeaad05e5d6904fb2c7c681a0bf653dc7d84
Signed-off-by: Deepti Deshatty <deepti.deshatty@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79209
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Drop the first argument specifying the number of arguments pushed
to the stack. Instead always push the 3 arguments to stack and use
the first one as function pointer to call while in protected mode.
While on it add more comments and simplify register restore code.
Tested:
- On qemu can call x86_32 function and pass argument and return
value.
- Booted Lenovo X220 in x86_64 mode using x86_32 MRC.
Change-Id: I30809453a1800ba3c0df60acd7eca778841c520f
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79752
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- Remove pointers in argument list passed to MRC to make sure the struct
has the same size on x86_64 as on x86_32.
- Add assembly wrapper to call the MRC with argument in EAX.
- Wrap calling MRC in protected_mode_call_2arg, which is a stub on x86_32
Tested: Boots on Lenovo X220 using MRC in x86_32 and x86_64 mode.
Change-Id: Id755e7381c5a94360e3511c53432d68b7687df67
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
1. Set PCIe related GPIOs to NC if fw_config use "WIFI_CNVI".
2. Set CNVi related GPIOs to NC if fw_config use "WIFI_PCIE".
3. Remove "ALC5650_NO_AMP_I2S" case in
fw_config_gpio_padbased_override(). bt_i2s_enable_pads should not
relevant to audio codec/amp, and it is already enabled in "WIFI_CNVI"
case.
BUG=b:312099281
TEST=Build and test on karis
Change-Id: Ib1a32f1a38ae33cf992b80a3408aa8e2fa3ddab0
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79765
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
They always require special care so that line breaks and variable names
are escaped properly. One loop can be removed entirely because install
accepts multiple files to install in a target directories, the other
loops were filled by find which can just call the commands on its own.
Change-Id: I9f9dddfe3f3ceceb6a0510d6dd862351e4b10210
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79523
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch implements an API which relies on the
chromeos_get_factory_config() function to retrieve the factory
config value.
This information is useful to determine whether a ChromeOS device
is branded as a Chromebook Plus based on specific bit flags:
- Bit 4 (0x10): Indicates whether the device chassis has the
"chromebook-plus" branding.
- Bits 3-0 (0x1): Must be 0x1 to signify compliance with
Chromebook Plus hardware specifications.
BUG=b:317880956
TEST=Able to verify that google/screebo is branded as
Chromebook Plus.
Change-Id: Iebaed1c60e34af4cc36316f1f87a89df778b0857
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79763
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
This code leverages the TPM vendor-specific function
tlcl_cr50_get_factory_config() to fetch the device's factory
configuration.
BUG=b:317880956
TEST=Able to retrieve the factory config from google/screebo.
Change-Id: I34f47c9a94972534cda656ef624ef12ed5ddeb06
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
This patch enables retrieval of factory configuration data from
Google TPM devices (both Cr50 and Ti50).
This patch utilizes vendor-specific command
TPM2_CR50_SUB_CMD_GET_FACTORY_CONFIG (68).
The factory config space is a 64-bit, one-time programmable.
For the unprovisioned one, the read will be 0x0.
BUG=b:317880956
TEST=Able to retrieve the factory config from google/screebo.
Change-Id: Ifd0e850770152a03aa46d7f8bbb76f7520a59081
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79736
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add `VBOOT_X86_RSA_ACCELERATION' Kconfig option to enable SSE2
instruction set implementation of modulus exponentiation which is part
of the RSA signature verification process.
BUG=b:312709384
TEST=Able to use SSE2 accelerated implementation on rex0
Change-Id: Ib6e39eb9f592f36ad3dca76c8eaf2fe334704265
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79289
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Updating from commit id c0cb4bfa:
2023-12-08 signer: sign_android_image.sh should die when image repacking fails
to commit id 7c3b60bb:
2023-10-13 firmware/2lib: Use SSE2 to speed-up Montgomery multiplication
This brings in 3 new commits:
7c3b60bb firmware/2lib: Use SSE2 to speed-up Montgomery multiplication
8bb2f369 firmware: 2load_kernel: Set data_key allow_hwcrypto flag
2b183b58 vboot_reference: open drive rdonly when getting details
6ee22049 sign_official_build: switch from dgst to pkeyutl
da69cf46 Makefile: Add support for make 4.3
Also update the implementations of the vb2ex_hwcrypto_modexp() callback
to match the API changes made in vboot.
Change-Id: Ia6e535f4e49045e24ab005ccd7dcbbcf250f96ac
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79685
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
The FSP boot mode showing in serial log is a magic number.
In order to let user understand its meaning directly, add
the strings to describe the modes.
TEST=build, boot the device and check the logs:
without this change, the log is like:
[SPEW ] bootmode is set to: 2
with this change:
[SPEW ] bootmode is set to: 2 (boot assuming no config change)
Change-Id: I49a409edcde7f6ccb95eafb0b250f86329817cba
Signed-off-by: Marx Wang <marx.wang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Since we have chipset devicetrees for all SoCs that include this code in
the build, we can use the DEV_PTR macro instead of using
pcidev_path_on_root to get the device struct pointer. We can also use
the is_dev_enabled function instead of checking the value of the enabled
element of the device struct directly.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5dcd92399e2d3f304352f2170dd3ef8761e86541
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79672
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since we have chipset devicetrees for both SoCs supported by the
Stoneyridge code, we can use the DEV_PTR macro instead of using
pcidev_path_on_root to get the device struct pointer. We can also use
the is_dev_enabled function instead of checking the value of the enabled
element of the device struct directly.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifb787750ebc6aa2fef9d3be0e84e6afcffdc2ac1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79671
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This southbridge can route POST codes written to port 0x80 to either
LPC or PCI, but currently always route them to LPC. Change it so that
POST codes are routed to PCI if CONFIG(POST_DEVICE_PCI_PCIE) is
selected, LPC otherwise.
Rename the static function because POST codes no longer always go to
LPC.
Change-Id: I455d7aff27154d6821e262a21248e8c7306e2d61
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79725
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This patch follows the BWG recommendation (doc 729123) by clearing
the SPI SYNC_SS bit before disabling the WPD bit in
SPI_BIOS_CONTROL. This prevents boot hangs due to a 3-strike error.
Unable to follow this guideline would result into boot hang
(3-strike error).
BRANCH=firmware-rex-15709.B
TEST=Able to build and boot google/rex.
Change-Id: I18dbbc92554d803eea38ceb0b936a9da9191cb11
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Previous sleep state showing in serial log is a magic number.
In order to let users understand its meanings directly, add
the strings to describe the modes.
TEST=build, boot the device and check the logs:
without this change, the log is like:
[DEBUG] prev_sleep_state 0
with this change:
[DEBUG] prev_sleep_state 0 (S0)
Change-Id: Iabe63610d3416b3b6e823746e3ccc5116fabb17d
Signed-off-by: Marx Wang <marx.wang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78999
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
According to datasheet, EN_TCHSCR_PWR high --> SOC_TCHSCR_RST_R_L high
should over 5ms. And current measure result is 200us.
Set EN_TCHSCR_PWR to output high in bootblock to make it meet datasheet
requirment.
Measurement result of EN_TCHSCR_PWR high --> SOC_TCHSCR_RST_R_L high:
Power on --> 31.7 ms
Resume --> 38.7 ms
BUG=b:314245238
TEST=Measure the sequence
Change-Id: I56e455a980b465f27794b30df058ec0944befc2e
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79571
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The physical address size of the System-on-Chip (SoC) can be different
from the CPU physical address size. These two different physical
address sizes should be used for settings of their respective field.
For instance, the physical address size related to the CPU should be
used for MTRR programming while the physical address size of the SoC
should be used for MMIO resource allocation.
Typically, on Meteor Lake, the CPUs physical address size is 46 if TME
is disabled and 42 if TME is enabled but Meteor Lake SoC physical
address size is always 42. As a result, MTRRs should reflect the TME
status while coreboot MMIO resource allocator should always use
42 bits.
This commit introduces `SOC_PHYSICAL_ADDRESS_WIDTH' Kconfig to set the
physical address size of the SoC for those SoCs.
BUG=b:314886709
TEST=MTRR are aligned between coreboot and FSP
Change-Id: Icb76242718581357e5c62c2465690cf489cb1375
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79665
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some GPIOs were not configured correctly according to the HW
spreadsheet provided by the HW team.
* GPP_B5/GPP_B6 use NF1, not NF2
* GPP_B23 should use NF2, no GPI
* GPP_D11 should be set to NC
* GPP_E21/22 should be using NF (previous NC)
* GPP_F17 is a GPO
* GPP_F18 should be an interrupt, not a NF
BUG=b:300690448,b:316180020
BRANCH=NONE
TEST=emerge-brox coreboot
Change-Id: I9e1e62adb79bd7fdab935afdbf2d23f9061b88aa
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79705
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Did a pass through HW team's brox speadsheet and aligned the gpio.c
file with it. The changes in this CL include fixing the pulls for
GPIOs as necessary, making sure that it matches what is in the HW
team's spreadsheet.
BUG=b:300690448
BRANCH=NONE
TEST=emerge-brox coreboot
Change-Id: Ie50cb3c6fc85f1633c1afd1330c0e040e04b0ec1
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79704
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Did a pass through HW team's brox speadsheet and aligned the gpio.c
file with it. The changes here include changing the pad config to NC
because it is not being used in ChromeOS.
BUG=b:300690448
BRANCH=NONE
TEST=emerge-brox coreboot
Change-Id: I15471e4d7ff25c858b05ef024f15ca7c0b9e598e
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79703
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some of the boards use the EC_SYNC pin to wake the AP but do not
advertise the pin as wake capable in the CREC _CRS resource. Relevant
boards were determined through empirical testing and inspection of gpio
configuration.
Update the ACPI tables for rex, brya, and brox based boards to advertise
their EC_SYNC pin as wake capable.
BUG=b:243700486
TEST=-Dump ACPI and verify ExclusiveAndWake share type is set when
EC_SYNC_IRQ_WAKE_CAPABLE is defined
-Wake Aviko via keypress and verify chromeos-ec as wake source
-Wake Screebo via lid open and verify chromeos-ec as wake source
Change-Id: I5828be7c9420cab6ae838272c8301c302a3e078c
Signed-off-by: Mark Hasemeyer <markhas@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79374
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
SATA_IDE_DEVID, AHCI_DEVID_MS and AHCI_DEVID_AMD are still kept even
though they're unused at the moment, but those might still be useful to
keep around, since the SATA controller can have different PCI device IDs
depending on in which mode it is in.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia05683b732d9748d9198225acaecbd4dc196733a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79577
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
These IDs are not used as crashlog data is not stored in CBMEM now.
(Ref CL: I43bb61485b77d786647900ca284b7f492f412aee
Title: soc/intel/common,mtl: Refactor BERT generation flow for crashlog)
BUG=b:298234592
TEST=Able to build REX.
Change-Id: Ie38571dece89a995d582099d34f0a1dd57cb936f
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78259
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
With earlier flow, a chunk of CBMEM region was allocated for each SRAM
e.g., PUNIT SRAM, SOC PMC SRAM and IOE PMC SRAM. Then entire SRAM
content was copied to dedicated CBMEM region. Later in acpi_bert.c, the
BERT table was getting created for each chunk of CBMEM. This flow was
not considering creating separate entries for each region of crashlog
records. It resulted in only the first entry getting decoded from each
SRAM.
New flow aims to fix this issue. With new flow, a simple singly linked
list is created to store each region of crashlog records from all
SRAMs. The crashlog data is not copied to CBMEM. The nodes are
allocated dynamically and then copied to ACPI BERT table and then
freed. This flow also makes the overall crashlog code much simpler.
BUG=b:298234592
TEST=With this change decoding crashlog show comprehensive details,
tested on REX.
Change-Id: I43bb61485b77d786647900ca284b7f492f412aee
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78257
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The optimization of sleep time in acpi code includes reducing the sleep
duration and increasing the polling frequency within the acpi _ON/_OFF
method. StorageD3Enable is activated in Google/Rex, and this
optimization results in a saving of approximately 25ms in D3cold resume
time, reducing it from around 160ms to 135ms.
BUG=b:296206467
BRANCH=firmware-rex-15709.B
TEST=boot test verified on google/rex
verified _ON/_OFF Method in SSDT.
verifid kernel log in s0ix test -
0000:00:06.0: PM: pci_pm_resume_noirq
Change-Id: I7ba960cb78b42ff0108a48f00206b6df0c78ce7a
Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Enable Acoustic noise mitigation for google/screebo and set slew rate
to 1/8 for IA domain and ignore the slew rate for SA domain.
BUG=b:312405633,
TEST=Able to build and boot google/screebo.
Before:
[SPEW ] AcousticNoiseMitigation : 0x0
[SPEW ] FastPkgCRampDisable for Index = 0 : 0x0
[SPEW ] SlowSlewRate for Index = 0 : 0x0
After:
[SPEW ] AcousticNoiseMitigation : 0x1
[SPEW ] FastPkgCRampDisable for Index = 0 : 0x1
[SPEW ] SlowSlewRate for Index = 0 : 0x2
Change-Id: Ib86939ab48c2c6e7d0491d7c1cb4a2c7c6a1b568
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79323
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Acoustic noise in PCBs is a common problem and be caused by a variety
of factors, including:
Mechanical vibrations, Electromagnetic interference (EMI) and/or Thermal
expansion.
This patch adds the UPDs to FSPM header file for mitigating the acoustic
noise.
FSPM:
1. AcousticNoiseMitigation
2. FastPkgCRampDisable
3. SlowSlewRate
BUG=b:312405633
TEST=Able to build and boot google/rex.
Change-Id: Iea0bfa2f92bb82e722ffc1a0b2f1e374b32e4ebc
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79301
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
As we look at unifying the format of coreboot code (/src, excluding
src/vendorcode), we need a code-beautifier configuration that works
well with the coreboot style. This patch is an attempt to match the
existing code styles as much as possible.
There are going to be some trade-offs in any code formatter. Tables
which have been hand-formatted probably won't look as good. These
can be specifically marked to be excluded from the formatter, however
this should be the exception, not the rule.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I70341d77e167c145f447594b6b0bef628cea83c6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78832
Reviewed-by: Zebreus <lennarteichhorn@googlemail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PCH identification functions and `pch_iobp_update` are used in multiple
stages. Move them out of `pch.c` to drop some ugly preprocessor usage.
Subsequent commits will use `pch_iobp_update` in romstage as well.
Change-Id: I8d33338a4f74fd03c8f99f8fcece99b63c28adab
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79624
Reviewed-by: Naresh <naresh.solanki.2011@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This option is nowhere selected and there is only a single case left
where it's used. Guarding the check in pci_rom_load() seems like a
bad idea: As the code would be copying all VGA ROMs to the same
location, it would be only working by chance (if the last encoun-
tered ROM is the right one). Hence, drop the guard and always check
for the correct device.
Change-Id: Ib283bf0a65367b99099a3bfcbd27585d44235eb9
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79596
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There's neither need to remove get_hw_mem_hole_info from the code if the
Kconfig option was set to 0 nor the actual value didn't make any
difference in the behavior of the code: When node_id has still its
initial value of -1, domain_read_resources won't use the value of
hole_startk, and when node_id is set to 0, get_hw_mem_hole_info also
sets hole_startk to the actual value that then gets used by
domain_read_resources.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ieffab695a3151ed7f6bf9d6c880bbb43eecf7893
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79609
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This APU is always a single-node, so the nodeid parameter of
get_node_pci is always 0. Since this SoC has a chipset devicetree, we
can just use DEV_PTR(ht_X) instead of the pcidev_on_root call.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1bf9d214b4c2e5d995976fb79fef6fe43a6e9fa0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79608
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This APU is always a single-node and since we're in ramstage when
domain_read_resources gets called, there's DRAM on this node, so no need
to check for this. To be extra sure, also initialize basek and limitk
before calling get_dram_base_limit with pointers to those as arguments.
This won't be necessary for the code to work as intended, but will
probably keep the compiler from complaining. Also move the declaration
of basek, limitk and sizek to the beginning of the function.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4ef8011eb57b16218b8f5fea295900b855c3014b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79611
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This APU is always a single-node and also only has one DRAM controller,
so there is only one valid DRAM base and limit register. It's also worth
mentioning that the assumption made in get_dram_base_limit that the n-th
node is using the n-tn DRAM range register was valid for K8, but not
necessarily on newer generations than that.
TEST=PC Engines APU2 still boots and doesn't show any new problems
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id0529c66e8d0e6c8eb42eec2c6d9d2e892287865
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79607
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This APU is always a single-node and also only has one DRAM controller,
so we don't need to loop over the different nodes to find the memory
hole below 4GB. We also don't need to check for the special case where
the memory hole is non-DRAM address space between the parts of the
address space decoded by different DRAM controllers.
TEST=PC Engines APU2 still boots and doesn't show any new problems
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9793d911d2d496be49168c06d83ceb802bc2b647
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79606
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This APU is always a single-node, so domain_read_resources only needs to
handle exactly one node and doesn't need to loop over the nodes.
TEST=PC Engines APU2 still boots and doesn't show any new problems
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4218077cb4e11b762ce0e8694a97bdec33eaa056
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79605
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This SoC only supports a single-node configuration, so all the code
related to multi-node support can be removed. In this commit only the
get_fx_devs function and related code are removed for better
reviewability. In f1_write_config32 it's no longer needed to loop over
the different devices of the different nodes, so only a single PCI
config space write remains.
TEST=PC Engines APU2 still boots and doesn't show any new problems
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5dc7324d3fcd0d07ac7a3a246a740fd9e91c3840
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79604
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This APU is always a single-node system and bits 4..6 of the node ID
register D18F0x60 are also marked as reserved in BKDG #52740 Rev 3.05.
On an APU2 board with quad-core APU, this register reads back 0x00030000
which results in a value of 1 to be returned from get_node_nums, so this
patch doesn't change behavior, but stops using reserved bits.
TEST=PC Engines APU2 still boots and doesn't show any new problems
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I65ed1124c0ca8e7eba54ff53dc626d35cd5e2e58
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79603
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This system only has one northbridge and amd_initcpuio has already set
up the routing of the legacy VGA IO and MMIO ranges to it. Since only
the pci_dev_set_resources call remains in nb_set_resources, use
pci_dev_set_resources directly as set_resources function.
TEST=PC Engines APU2 still boots and doesn't show any new problems
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib3835db9fd83221ac2b8e34d998f938812d24413
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79582
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Since the IOMMU is always function 2 of device 0 on bus 0, the device
operations can be statically assigned in the devicetree and there's no
need to bind the IOMMU device operations to the PCI device during
runtime via a list of PCI IDs.
TEST=PC Engines APU2 still boots and doesn't show any new problems
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I84e949500ee86e0fcb2d15791502f5e3e7127703
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79105
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Since the northbridge is always function 0 of device 0 on bus 0, the
device operations can be statically assigned in the devicetree and
there's no need to bind the northbridge device operations to the PCI
device during runtime via a list of PCI IDs.
TEST=PC Engines APU2 still boots and doesn't show any new problems
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia7faaa468ff77e05c378c5555622c3584cfe3f81
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79104
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
With 1ms delay, reset is de-asserted too soon, before power is fully
up, causing a glitch to the reset signal. The issue is resolved with
4ms delay.
TEST=tested on google/jinlon device and observed the issue is resolved.
BUG=b:260253945
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: I4efe916824cc193a7c2db7599b37f0d4de40bfce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79474
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Shelley Chen <shchen@google.com>
This patch provides a way to mask the 3-strike error on Intel
Meteor Lake SoC platform across pre-prod and prod SoC.
This patch decouples MSR selection for 3-strike error disablement, ensuring compatibility across SoC types.
Without the correct MSR been programmed the SoC platform is unable to disable 3-strike error.
BUG=b:314883362
TEST=Disable the 3-strike on google/screebo with QS silicon.
Change-Id: I5363102deea67c44c9433a3f66c92badb0d0f182
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79473
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When caching the ramstage for suspend/resume, we copy the entire image
as it resides in RAM. The last part of that, CONFIG_HEAP_SIZE bytes, is
the heap that will be reinitialized when the ramstage is started again.
As such, copying doesn't make sense and complicates HEAP_SIZE
configuration (because it needs to fit the space-constrained cache
location) and costs time and space. Therefore, skip the heap.
Side notes:
- When building with ASAN, program.ld indicates that it will allocate
some more space after the heap. This is not a problem, we just copy
an ASAN-sized copy of the heap.
- Heap use is managed in src/lib/malloc with statically allocated
variables. Because ramstage is cached before it's executed, these
values will be reset to their compile-time default values, too.
Change-Id: I6553dc8b758196f2476af2e692c0421d0fa2b98e
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79525
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The end-of-build targets weren't very granular previously, so warnings
could be lost instead of being printed at the end of the build.
This separates the end-of-build targets into 4 different groups, in this
order:
- build_complete: The coreboot build itself is done
- files_added: All files have been added to CBFS
- show_coreboot: Display any normal coreboot build messages
- show_notices: Display any warnings or notes
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ia67446f164b8e66415a1a8c196999316fdf39f1e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79382
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
For initial debugging, we want to disable SW syncing. Will re-enable
in the future.
BUG=b:300690448
BRANCH=None
TEST=emerge-brox coreboot chromeos-bootimage
run gbb_utility --get --flags <image>
make sure that it returns 0xa39
Change-Id: I865e9585ab37d1328a0ff54c6343cdad2c02220c
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79569
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Keith Short <keithshort@chromium.org>
In commit 0a0945c6a2 (sio/nuvoton/npcd378: Use acpi_device_path_join),
some oversights were made. Instances of "strconcat(scope, ..." should be
replaced with "..._join(dev->bus->dev, ..." instead of "..._join(dev, ...".
On HP 8200 USDT, this fixes ACPI error like this on resume from S3:
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.SIO0.L040.RMFG], AE_NOT_FOUND (20230628/psargs-330)
ACPI Error: Aborting method \_GPE._L08 due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L08] (20230628/evgpe-511)
RMFG seems to be a typo of PMFG made in that same commit.
Change-Id: Ifffa7ad72cfdb644c8b5147132a5fd56511ed33b
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Even though this mainboard is called 'Onyx', the openSIL implementation
and the corresponding coreboot integration is only a proof of concept
that isn't fully featured, has known limitations and bugs, and is not
meant for or ready to being productized. Adding the proof of concept
suffix to the name should point this out clearly enough so that no
potential customer could infer that this might be a fully functional
and supported implementation which it is not.
Change-Id: I157a8fffdc2a8543465fe8d444ac87f3f417389f
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77896
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
The openSIL code for the Genoa SoC is only a proof of concept, so change
the name of the Kconfig option to include this code in the build from
SOC_AMD_OPENSIL_GENOA to SOC_AMD_OPENSIL_GENOA_POC to clarify that this
is code that isn't intended or ready to be productized.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If91cdaa7c324426964bba2de2109b6c38482fab8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79574
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Even though this SoC is called 'Genoa', the openSIL implementation and
the corresponding coreboot integration is only a proof of concept that
isn't fully featured, has known limitations and bugs, and is not meant
for or ready to being productized. Adding the proof of concept suffix to
the name should point this out clearly enough so that no potential
customer could infer that this might be a fully functional and supported
implementation which it is not.
Change-Id: Ia459b1e007dcfd8e8710c12e252b2f9a4ae19b72
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77894
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The default EPP is set at 50%, which is deemed insufficiently
aggressive for meeting the MTL performance expectations in
balance_performance mode.
# cat /sys/devices/system/cpu/cpu0/cpufreq/energy_performance_preference
balance_performance
# iotools rdmsr 0 0x774
0x0000000080003f06
EPP=45% is giving the required performance in MTL.
# iotools rdmsr 0 0x774
0x0000000073003d06
NOTE: Kernel changes are necessary to ensure that the EPP (Energy Performance Preference) configured in the BIOS is not overwritten: https://patchwork.kernel.org/patch/13461932
BUG=b:314275133
TEST=Build and boot.
Change-Id: I1953994cdb4e9363fdd4b4728e3e5236276c06c8
Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79386
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit lays the groundwork for implementing the ACPI WDAT (Watchdog
Action Table) table specification. The WDAT is a special ACPI table
introduced by Microsoft that describes the watchdog for the OS.
Platforms that need to implement the WDAT table must describe the
hardware watchdog management operations as described in the
specification. See “Links to ACPI-Related Documents”
(http://uefi.org/acpi) under the heading “Watchdog Action Table”.
BUG=b:314260167
TEST=Mock the acpi_soc_fill_wdat function for a specific platform/soc
and enable ACPI_WDAT_WDT in the kconfig. Check if the build passes
successfully.
Change-Id: Ieb82d1f69b2b7fffacfd2928bc71f8ff10498074
Signed-off-by: Marek Maslanka <mmaslanka@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
FSP default value for LpDdrDqDqsReTraining is 1. For boards
that didn't set LpDdrDqDqsReTraining to any value, 0 was being
assigned and it caused black screen issue.
BUG=b:302465393
TEST=Boot to OS with debug FSP, check LpDdrDqDqsReTraining = 1
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I301a6e43f2944ffbc63431393378ab8b23450032
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
This patch introduces a new API to disable signaling the 3-strike event
on Intel Meteor Lake C0 (QS) stepping and subsequent SoCs. This is
necessary because the existing event handling mechanism is incompatible
with the new hardware design.
Disabling the 3-strike event registration prevents the 3-strike count
from increasing, which addresses bug b:314883362. This issue can potentially lead to system instability.
BUG=b:314883362
TEST=disabling the 3-strike event on a Google Screebo system with QS silicon.
Change-Id: I15bd5a93da34d7f2a127c21c4cd8b5952926bccf
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79472
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
FSP default value for LpDdrDqDqsReTraining is 1. For boards
that didn't set LpDdrDqDqsReTraining to any value, 0 was being
assigned and it caused black screen issue.
BUG=b:302465393,b:315739133
TEST=Boot to OS with debug FSP, check LpDdrDqDqsReTraining = 1
Change-Id: I5d61301fddac6630bb1c48e992dd76e5cf02a272
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79533
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Previously ramdetect.c was compiled only for VENDOR_EMULATION.
Hence add Kconfig option PROBE_RAM which allows board outside
the scope of VENDOR_EMULATION to select and utilize probe_ram
function to runtime detect usable RAM in emulation environment.
PROBE_RAM is default selected if VENDOR_EMULATION is set so
that existing boards under VENDOR_EMULATION scope are not
affected.
Other boards can explicitly select PROBE_RAM to use probe_ram.
TEST=Build mb/arm/rdn2 with PROBE_RAM selected & make sure
there is no any error.
Also checked qemu-aarch64 build to make sure build is success.
Change-Id: Id909ddaee6958cfa8a6c263a11f9a90d94710aa7
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79450
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Updating from commit id db533497:
2023-12-05 20:09:44 +0000 - (host/lib/pkcs11: Remove superfluous 'nss' directory from include paths)
to commit id c0cb4bfa:
2023-12-08 09:14:32 +0000 - (signer: sign_android_image.sh should die when image repacking fails)
This brings in 3 new commits:
c0cb4bfa signer: sign_android_image.sh should die when image repacking fails
30e37712 tlcl: Add `TlclCreatePrimary()` support
12fa13e3 2api: Add firmware & kernel PCR support
Change-Id: I354c1d07c3b506069d5b64bc2fc476dadc36e0e2
Signed-off-by: Yi Chou <yich@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79484
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To quote its repo[0]: Wuffs is a memory-safe programming language (and
a standard library written in that language) for Wrangling Untrusted
File Formats Safely. Wrangling includes parsing, decoding and encoding.
It compiles its library, written in its own language, to a C/C++ source
file that can then be used independently without needing support for
the language. That library is now imported to src/vendorcode/wuffs/.
This change modifies our linters to ignore that directory because
it's supposed to contain the wuffs compiler's result verbatim.
Nigel Tao provided an initial wrapper around wuffs' jpeg decoder
that implements our JPEG API. I further changed it a bit regarding
data placement, dropped stuff from our API that wasn't ever used,
or isn't used anymore, and generally made it fit coreboot a bit
better. Features are Nigel's, bugs are mine.
This commit also adapts our jpeg fuzz test to work with the modified
API. After limiting it to deal only with approximately screen sized
inputs, it fuzzed for 25 hours CPU time without a single hang or
crash. This is a notable improvement over running the test with our
old decoder which crashes within a minute.
Finally, I tried the new parser with a pretty-much-random JPEG file
I got from the internet, and it just showed it (once the resolution
matched), which is also a notable improvement over the old decoder
which is very particular about the subset of JPEG it supports.
In terms of code size, a QEmu build's ramstage increases
from 128060 bytes decompressed (64121 bytes after LZMA)
to 172304 bytes decompressed (82734 bytes after LZMA).
[0] https://github.com/google/wuffs
Change-Id: If8fa7da69da1ad412f27c2c5e882393c7739bc82
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Based-on-work-by: Nigel Tao <nigeltao@golang.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78271
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Early versions of CB:76519 had more devices enabled in the chipset
devicetree which shouldn't necessarily be enabled in the chipset
devicetree. Enable most of those in the Onyx mainboard's devicetree.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ieeb96755a007a5ca70e4c31df09325835bb8ef47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Add the device and chip entries for the various PCIe ports and MPIO
lane configuration. Below each PCIe bridge device with an external PCIe
port on the mainboard, an MPIO chip is added that provides the
corresponding MPIO configuration for this external PCIe port.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8563c5a07eb8fd8ff9dd4e7b63fc9a7d485b1316
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78921
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When using the --skip_set and --skip_unset arguments, the config line
looked like a statement that the build was being skipped instead of
abuild just printing the configuration.
This updates those config statements to better show that it's the
config and not stating that this particular build is being skipped.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I6cc59f9b33dcda51aeb3640d449037a0aa054e36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76936
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
The ACPI spec defines keywords for the GpioInt and Interrupt resources
to specify whether a given pin is wake capable. Some boards are using
the ec sync interrupt pin to wake the system so the CREC _CRS needs to
be updated accordingly.
Provide a new macro that allows a board to specify whether its ec sync
pin is wake capable.
BUG=b:243700486
TEST=Dump ACPI and verify ExclusiveAndWake share type is set when
EC_SYNC_IRQ_WAKE_CAPABLE is defined
Change-Id: I483c801ff0fee4d3ce0a3b2fc220e0bd9356a612
Signed-off-by: Mark Hasemeyer <markhas@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Forest Mittelberg <bmbm@google.com>
Drive board specific USB configuration from the coreboot devicetree into
the opensil input block.
Add USB OC pins to chipset.cb
In the process of scrubbing opensil for public release USB became non
functional.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I506547a7abbb643d3e982e44a92f33b45cd739e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76517
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
If a framebuffer is already configured by coreboot, we need to ensure
that the framebuffer size is a multiple of GRANULE_SIZE before passing
to `mmu_add_memrange`. Otherwise, we would fail to allocate memory
region due to `sanity_check`.
Change-Id: Ia6a6400733ca10a61220087e87022f68c28e4789
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79451
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Return the PCI segment group number from data_fabric_get_pci_bus_numbers
via pointer argument so that amd_pci_domain_scan_bus can handle the PCI
segment group numbers once coreboot supports more than one PCI segment
group. For now, just print an error and return if the buses are on a PCI
segment group other than 0.
TEST=Mandolin still boots
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia53cda0ba656201c2197d05bc0d4a8fbbe8ad5d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
This patch records early signs of user activity during CSE firmware
synchronization or MRC (re)training events in the event
log (ELOG_TYPE_FW_EARLY_SOL).
These can be used to ensure persistence across global reset (e.g. after
CSE sync) so that they can be later retrieved in order to build things
such as test automation ensuring that we went through the SOL
path/display initialized.
BUG=b:279173035
TEST=Verified on google/rex, event shows in eventlog after CSE sync
and/or MRC.
Scenario #1: While performing MRC update
1 | 2023-11-08 | Early Sign of Life | MRC Early SOL Screen Shown
2 | 2023-11-08 | Memory Cache Update | Normal | Success
3 | 2023-11-08 | System boot | 9
4 | 2023-11-08 | ACPI Wake | S5
Scenario #2: While performing CSE update/downgrade
11 | 2023-11-08 | Early Sign of Life | CSE Sync Early SOL Screen Shown
12 | 2023-11-08 | System boot | 13
Scenario #2: While performing both MRC and CSE upgrade
16 | 2023-11-08 | Early Sign of Life | MRC Early SOL Screen Shown
17 | 2023-11-08 | Early Sign of Life | CSE Sync Early SOL Screen Shown
18 | 2023-11-08 | Memory Cache Update | Normal | Success
19 | 2023-11-08 | System boot | 16
20 | 2023-11-08 | ACPI Wake | S5
Change-Id: Idfa6f216194fd311bb1a57dd7c86fe7446a3597c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78983
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Meteor Lake Firmware Support Package (FSP-M) for ChromeOS includes an
pre-memory graphics driver which can be leveraged to display a text
message thanks to the following FSP-M UPD (Updateable Product Data):
- VgaInitControl (bitfield):
Bit 0: Turn on graphics, setup VGA text mode and display
`VgaMessage' text centered on the screen.
Bit 1: Clear text and tear down VGA text mode and graphics before
returning from FSP-M.
- VbtPtr (address): Pointer to the VBT (Video BIOS Tables) binary.
- VbtSize (unsigned int): Size of the VBT binary.
- LidStatus (boolean): Due to limited resources at early boot stages,
the text message is displayed on a single monitor. The lid status
helps decide which display is the most appropriate.
0: Lid is closed: show the text message on the external display if
available, do not display anything otherwise.
1: Lid is open: show the message on the internal display if
available, use an external display if available otherwise.
- VgaMessage (string): Text message to display.
If the `SOC_INTEL_METEORLAKE_SIGN_OF_LIFE' flag is set, coreboot
configures the UPDs above to display a text message during memory
training and CSME update. The text message can be configured via the
locale text mechanism using the `memory_training_desc' name.
The `SOC_INTEL_METEORLAKE_SIGN_OF_LIFE' selects the LZ4 compression
algorithm for VBT because LZMA decompression is not available in
romstage by default and adding LZMA support increases the romstage
binary size more than the VBT binary is reduced.
BUG=b:279173035
TEST=Text message is displayed during memory training on a rex board
Change-Id: I8e7772582b1895fa8e38780932346683be998558
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78244
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
This patch adds a function to check if a CSE FW update is required
during this boot. The function is expected to be used during use
cases like Pre-Memory Sign of Life text display to inform user of
a CSE Firmware update.
Bug=279173035
TEST=build and boot on google/rex board. Call the function in romstage
and confirm it returns True during CSE FW update and False otherwise
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: If5fae95786d28d586566881bc4436812754636ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78243
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
vboot_fw.a is built via a sub-invocation of make, but make is not able
to track dependencies between different invocations. That means the
toplevel make assumes that the vboot_fw.a target depends only on the
dependencies explicitly listed in coreboot's Makefile (only config.h in
this case), and thus assumes that if config.h didn't change it does not
need to rebuild the library. This breaks incremental builds when files
inside the vboot repository change.
This patch marks the target as .PHONY so that it will always be rebuilt.
The vboot Makefile's own dependency tracking will then ensure that on an
incremental build we only rebuild the vboot sources that actually
changed, so if nothing changed this will just add a simple and quick
$(AR) call.
Change-Id: I8bdd4e1589124914ba1e877e04b40ee709ea4140
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79375
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Updated Linux FW works with PCI gen3 speed and PSPP.
This reverts
commit 05c9a850fd ("mb/google/nipperkin: Fix WLAN to GEN2 speed")
https://review.coreboot.org/c/coreboot/+/63593
and
commit 76fddd9639 ("mb/google/nipperkin: Disable PSPP for WLAN")
https://review.coreboot.org/c/coreboot/+/63722
The changes are overlapped and are reverted together.
BUG=b:240426142 & b:228830362
The system is able to ran over 2500 cycles on Nipperkin with command
suspend_stress_test -c 10000 --wake_min 10 --suspend_min 10 \
--nofw_errors_fatal
The whole variant_update_dxio_descriptors is empty and is pushed back
to weak function.
Change-Id: Id207076542edc8ea0cabc6e02e29856c2b6803c7
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79172
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
The device/device.h provides the definition for struct device used in
those files, so include this header file to make sure that it's not only
included indirectly via some other header file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6ff7cdbf0f53ada92adb53cf268e5feee9df4629
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Updating from commit id 6788bb0:
2023-08-08 12:04:21 -0600 - (microcode-20230808 Release)
to commit id ece0d29:
2023-11-14 10:19:09 -0600 - (microcode-20231114 Release)
This brings in 1 new commits:
ece0d29 microcode-20231114 Release
Change-Id: I1d65318015803d5ca11dcf52e4011f49cf3129a1
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79403
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Updating from commit id ba7fd22d:
2023-11-29 01:50:20 +0000 - (Makefile: Always link libdl)
to commit id db533497:
2023-12-05 20:09:44 +0000 - (host/lib/pkcs11: Remove superfluous 'nss' directory from include paths)
This brings in 4 new commits:
db533497 host/lib/pkcs11: Remove superfluous 'nss' directory from include paths
3307f1a7 tlcl: Add `TlclEvictControl()` support
0bd01137 tlcl: Remove the redundant bytes in TlclReadPublic
9afdf0f2 sign_official_build.sh: stop messing with +x
Change-Id: Ib2ded699605dfa4032f4687e1e336297c0af1372
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79402
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Integration for additional container images might be added to the
Makefile at some later point. However, in order to build and test new
images just add a simple script which fulfills that requirement until
then.
Change-Id: Ibd0a6d59f395e074c784452849650d7f03b4f1d8
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79361
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
- First a console is set up for opensil.
- After that a region in CBMEM is reserved and passed to opensil which
will use it as a buffer for input/output information.
- Finally opensil is called and the return value handled.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I4833a5a86034a13e6be102a6b68c3bb54108bc9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Since the EHCI controllers in the PCH are always on the same device
functions, the device operations can be statically assigned in the
devicetree and there's no need to bind the EHCI device operations to the
PCI devices during runtime via a list of PCI IDs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I92ecc3607216fb2f31639db9628898c9ce81770d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79171
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Since the XHCI controller in the PCH is always on the same device
function, the device operations can be statically assigned in the
devicetree and there's no need to bind the XHCI device operations to the
PCI device during runtime via a list of PCI IDs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8685bec734415346a53330c9bd1aa82986995f1a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79170
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Since the PCI bridge in the PCH is always on the same device function,
the device operations can be statically assigned in the devicetree and
there's no need to bind the PCI bridge device operations to the PCI
device during runtime via a list of PCI IDs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic9ca925a12e64c9a5b3bf295653bf032572ff29a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79169
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Since the SMBus controller in the PCH is always on the same device
function, the device operations can be statically assigned in the
devicetree and there's no need to bind the SMBus device operations to
the PCI device during runtime via a list of PCI IDs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3d3745ba5aefa30efbe705155d216aa7eadd26a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79168
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Function 0 of the device that has the bridges to other buses is a dummy
function that can be left enabled to not have to shuffle around the
device function numbers when the first PCI bridge on that device isn't
enabled. That dummy device function is however not a PCI host bridge, so
change the comment from 'Dummy Host Bridge' to 'Dummy device function'.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Nico Huber <nico.h@gmx.de>
Change-Id: I6069205bd2e1cb0f75025e9f330afc50462e742a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79397
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Function 0 of the devices that have the bridges to other buses are dummy
functions that can be left enabled to not have to shuffle around the
device function numbers when the first PCI bridge on those devices isn't
enabled. Those dummy device functions are however not PCI host bridges,
so change the comments from 'Dummy Host Bridge' to 'Dummy device
function'.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Nico Huber <nico.h@gmx.de>
Change-Id: Ibddfdf558d84bc44434d718b86f41bd06044b22a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79396
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Since the LPC bridge in the PCH is always on the same device function,
the device operations can be statically assigned in the devicetree and
there's no need to bind the LPC bridge device operations to the PCI
device during runtime via a list of PCI IDs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I366226be4aba75b98e45e4832bfe129fac14dbfa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79167
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Fix up the memory config for brox based on the schematics. Also,
since memory training needs to happen in romstage, initializing the
MEM_STRAP & MEM_CH_SEL gpios for use in romstage. Also consolidating
the GPIOs needing to be initialized in romstage into the baseboard
gpio.c file.
BUG=b:300690448
BRANCH=None
TEST=emerge-brox coreboot
Change-Id: I17615cda7df10e73e49fb49f736728787ef7625d
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Building the Lenovo T60/T60p, iasl 20230628 shows the remark below:
dsdt.asl 2099: PowerResource (FPwR, 0, 0)
Remark 2182 - ^ At least one lower case letter found in NameSeg, ASL is case insensitive - converting to upper case (FPWR)
dsdt.asl 2118: Name (_PR0, Package () { FPwR })
Remark 2182 - ^ At least one lower case letter found in NameSeg, ASL is case insensitive - converting to upper case (FPWR)
Address it by making it all upper case.
Change-Id: Ia7924b015e76c43818d2d82da35ce0013d721c26
Fixes: 3ab13a8691 ("ec/lenovo/h8/acpi/thermal: Add support for passive cooling")
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79367
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update BND_NORTH_APB2_S's domain 5 permission to allow the access from
APU. The APU requires certain information saved in BND_NORTH_APB2_S for
voltage tuning. If this information cannot be retrieved, the APU may
operate at a high frequency with low voltage. Consequently, the APU may
not function as expected.
Change-Id: I967b138dc5517e54da7fbf94b9e502e478c991b5
Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com>
Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79348
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For ChromeOS platform the recovery reason is cleared in
vb2api_kernel_phase2 which is probably not called by any non-ChromeOS
system. It results in the platform being stuck in recovery mode, e.g.
when RW firmware verification fails. Even if the RW partition is
flashed with correctly signed image, the persistent non-zero recovery
reason will prevent vboot from attempting the RW partition check.
Use the newly exposed vb2api_clear_recovery and
VBOOT_CLEAR_RECOVERY_IN_RAMSTAGE Kconfig option to clear the recovery
reason and save it immediately to the VBNV. The idea is to let
non-ChromeOS coreboot platform to clear the recovery reason when
needed.
TEST=Clear the recovery reason in mainboard_final function right
before payload jump when RW partition is corrupted and RW partition is
valid. In case it is corrupted, the platform stays in recovery mode,
when valid the platform boots from RW partition. Tested on MSI PRO
Z690-A DDR4.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I7ffaf3e8f61a28a68c9802c184961b1b9bf9d617
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74343
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds the power limit configuration for MCH ID index 3 aka
0x7d14 DID which is identical to MCH ID 0x7d01 (index 1).
TEST=Able to perform power limit configuration for google/ovis.
[DEBUG] WEAK: src/mainboard/google/rex/variants/baseboard/ovis/
ramstage.c/variant_devtree_update called
[INFO ] Overriding power limits PL1 (mW) (19000, 28000)
PL2 (mW) (64000, 64000) PL4 (W) (120)
Change-Id: Iff71adb4e26d18970b5947927c258419f751de32
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79332
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
This patch removes the deprecated PL_PERFORMANCE and PL_BASELINE
configurations, relying instead on the refactored power limit flow.
This flow allows for seamless overrides by the baseboard and/or by
the variant board, if necessary.
Specifically, this patch:
- Removes PL_PERFORMANCE and PL_BASELINE configuration options from
mainboard.c in the google/rex directory.
- Relies on the baseboard_devtree_update() function, which is
implemented by the respective baseboard, to handle power limit
configuration.
- Leverages the variant_devtree_update() function, which is a
__weak implementation, to allow overrides by the variant directory.
This simplification improves code readability and maintainability while
maintaining the flexibility to handle power limit configurations as
needed.
Change-Id: I872e5cb59d7b2789ef517d4a090189785db46b85
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79331
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch ensures that the LidStatus UPD is passed a dynamic value,
rather than always passing 1 (CONFIG_RUN_FSP_GOP enabled) for FSP 2.0
devices.
Problem statement:
* FSP-S GFX PEIM initializes the on-board display (eDP) even when the
LID is physically closed, because LidStatus is always set to 1.
* FSP-S skips external display initialization even when the LID is
closed.
Solution:
* FSP-S GFX PEIM module understands the presence of an external display
if LidStatus is not set, and tries to probe the other display
endpoint.
* Statically passing LidStatus as always enabled (aka 1) does not
illustrate the exact device scenarios, so this patch updates
LidStatus dynamically by reading the EC memory map offset.
BUG=b:313886118
TEST=Able to build and boot google/marasov to redirect the display
using external HDMI monitor while LID is closed.
Change-Id: Idb1d71bd54837630f36d43a45effc53d35f9cb70
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79352
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds code to generate Processor Properties
Topology Tables (PPTT) compliant to the ACPI 6.4 specification.
- The 'acpi_get_pptt_topology' hook is mandatory once ACPI_PPTT
is selected. Its purpose is to return a pointer to a topology tree,
which describes the relationship between CPUs and caches. The hook
can be provided by, for example, mainboard code.
Background: We are currently working on mainboard code for qemu-sbsa
and Neoverse N2. Both require a valid PPTT table. Patch was tested
against the qemu-sbsa board.
Change-Id: Ia119e1ba15756704668116bdbc655190ec94ff10
Signed-off-by: David Milosevic <David.Milosevic@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
This patch expands the power limit override capability to include
variants directories, enabling them to modify power limit settings
configured by the baseboard.
Previously, only the baseboard could override power limit settings.
For instance, while the google/rex baseboard sets the PL1 max power
limit to 15W, the google/screebo variant couldn't override this value.
This enhancement empowers variants directories to override baseboard-
configured power limit settings, allowing for greater flexibility and
control over power limits.
BUG=b:313667378
TEST=Able to call into _weak implementation of `variant_devtree_update`
unless there is one override.
[DEBUG] WEAK: src/mainboard/google/rex/variants/baseboard/rex/
ramstage.c/variant_devtree_update called
[INFO ] Overriding power limits PL1 (mW) (10000, 15000) PL2 (mW)
(40000, 40000) PL4 (W) (84)
Change-Id: Ib07691625e075b0fbab42271512322ffc60ba13b
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
The Microsoft Debug Port Table 2 (DBG2) specification says that the
serial port subtype 0x00 should only be used for I/O-mapped 16550
compatible UARTs. The subtype 0x12 is a superset of that, and supports
specifying MMIO vs IO and the register access size via the generic
address structure. Rename the subtype 0x00 definition to
ACPI_DBG2_PORT_SERIAL_16550_IO_ONLY and add the subtype 0x12 definition
as new ACPI_DBG2_PORT_SERIAL_16550, so that the acpi_write_dbg2_uart
function will write the correct subtype for the generic 16550 UART.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I816bb22e6f76e661c8b8e39a2a4cb83b0085acb5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79219
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Inteltool is GPLv2 licensed so all files that link to it should be GPLv2
by default. In addition, the contents of several of these headers were
originally moved directly from gpio_groups.c, which is explicitly marked
as GPL-2.0-only.
Change-Id: Ie897cb238c0c9e89fe677c999cbf1803f5f4609a
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
We should make sure _stack/_estack and the other labels are consistent.
And _data & _edata is also useful to clean up the sensitive data on the
data section.
BUG=b:248610274
TEST=emerge-cherry libpayload
BRANCH=none
Cq-Depend: chromium:5052462
Change-Id: I589040f4db60b35813ea9f4ba9503244bd7def00
Signed-off-by: Yi Chou <yich@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Brox has SSD and UFS storage per different SKU.
1. Set SSD on CPU PCIe port (PCIEX4_A) and configure related gpio
settings according to the schematic.
2. Enable UFS, also enable ISH since it is PCI function 0, required
for UFS function 7 to be enabled.
3. Set unused SRCCLKREQ signals to NC.
4. Remove unused gpio settings in variant gpio table to prevent
unexpected overrides.
BUG=b:311450057
BRANCH=None
TEST=emerge-brox coreboot
Change-Id: I88922bcfa13652006aa10078c3c444624fd4575e
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79295
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The "config" targets exist to edit the .config file, and so they
should be more forgiving with invalid configs (that they'll convert
into valid configs on save). They will still emit warnings about
invalid symbols, but not exit with an error.
The regular build process still fails if the .config looks unexpected
(for example when there's an unknown config flag).
Change-Id: If427e075766c68d493dd406609f21b6bb27d1d74
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79298
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Updating from commit id f2b01bf0:
2023-10-27 Julius Werner firmware: Undeprecate VB2_RECOVERY_FW_GET_FW_BODY
to commit id ba7fd22d:
2023-11-27 Julius Werner Makefile: Always link libdl
This brings in 54 new commits:
ba7fd22d Makefile: Always link libdl
1b30d195 sign_official_build: sign_update_payload with pkcs11
ca7a1427 sign_firmware: support loem key config
a9623573 sign_official_build: add keys to default key config
d41497dc sign_official_build: support loem key config
da2450db sign_official_build: support sign with .vbprik2 files
ee326142 getversion: Make reproducible
8aaf9e32 futility: fix a typo in help message of `read`
9ce505f4 futility: Fix incorrect warning about signing length
23a0ce4e scripts: add lib/keycfg.sh
2e34330b Makefile: Fix firmware build for FIRMWARE_ARCH=arm64
fd5937d1 tests/futility/test_show_and_verify: Add test cases for invalid data key
00aa0626 futility/cmd_vbutil_kernel: Drop --pad option for --verify
c661ab76 futility/cmd_show: Drop --pad option
c70511d7 tests/futility/test_show_and_verify: Add test cases for kernel vblocks
c9100f46 signer: Use compression flags stored in the metadata file
f1f3076f vboot: Add vb_keyb_from_private_key
c39a2fc1 host: support signing with pkcs11 key for vbprik2
c6d44076 vboot: merge reading function of vb2/vb21 private key
6b8e759f vboot: replace custom prefix "pkcs11" to "remote"
481440d0 futility: Prefer to flash over CCD instead of C2D2
1244c06f futility/cmd_dump_fmap: Print an error if FMAP header not found
cab69289 futility/cmd_show: Fix parseable output for kernel preamble flags
71a03dc6 futility/cmd_show: Make preamble parseable output consistent
bdac62a4 futility/cmd_show: Make 'show' return 0 for invalid kernel body
135df2d7 futility/cmd_show: Show parseable "keyblock::valid" for valid keyblock
37f37fcd futility/cmd_show: Fix output for firmware body signature
79c244ff tests/futility/test_show_and_verify: Add test cases for bios_brya_mp.bin
d4b6560f signer: Update mkfs.erofs pcluster value to 32K
f79a2432 futility/cmd_sign: Fix a space in usage text
a307fcb5 futility: updater: rename --ccd to --ccd_without_servod
6b9f66d3 futility: updater: Fix malloc overflow due to broken keyblock
a94a784c updater: update: Support multiple Servos without --servo_port
25875bef tests/futility: Add test cases for VBOOT_CBFS_INTEGRATION
5f8e3973 futility/cmd_show: Fix typo "metatadata"
9d30a01f futility: Trim trailing spaces in kernel config
c59794a6 sign_uefi: Support signing via pkcs11
68d4aa4b sign_uefi: Skip private key check if it's a pkcs11 URI
6b9d624b sign_uefi: Pass each key path separately
483f65e4 sign_official_build.sh: properly show errors on loem issues
516ee7bc sign_uefi: Use named args instead of positional
0eec8e25 vboot_reference-sys: Switch from Command to bindgen::Builder
46f5aab8 image_signing: support multiple release names
f13af139 sign_official_build: Sudo invocation within bits of android signing
3f165374 futility: updater: Add optional serial number argument to --ccd
64379cc6 sign_official_build: add --debug flag
7160bf9f 2lib: Fix relocation issue when compiling locally with musl libc
0e27cdff vboot_reference-sys: Add vboot_host.h
2c82e73c Override use_apksigner FLAGS
b43469c7 futility/cmd_show: Support --publickey FW_VBLOCK
0eb4da96 tests/futility: Update kern_preamble.bin as kernel_part.bin
68a03355 tests/futility: Move test_show_vs_verify.sh into test_show_and_verify.sh
8daf1474 tests/futility: Move 'futility show' tests to a separate file
34190e3d futility: Exit with error when metadata hash verification not supported
967aa462 firmware/2lib: Fix function comment for vb2api_get_firmware_size()
Change-Id: I58b231d53f433a396b1ea8cd4e0ddc49a310e385
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79313
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
Updating from commit id 88b2d8134:
2023-09-06 11:26:32 +0200 - (Merge "fix(scmi): add parameter for plat_scmi_clock_rates_array" into integration)
to commit id e7486343d:
2023-11-28 22:48:16 +0100 - (Merge changes from topic "xlnx_fitimage_check" into integration)
This brings in 451 new commits.
Change-Id: I75a89c6f0d60ccccd8ff42954416666dabef717f
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Since lars has two touchscreen options, we need to determine which (if
any) are present on a given device at runtime so that there are not
multiple ACPI touchscreen devices (as it makes Windows unhappy).
Implement power sequencing and runtime detection for both touchscreen
options.
TEST=build/boot Win11/Linux on google/lars, verify touchscreen detected
and functional under both OSes.
Change-Id: I49ccb29ec4589315a4abe3c0ea8fa76f97080bcd
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79311
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
LARS has a Melfas touchscreen option, so add an entry for it. Adapted
from Chromium branch firmware-glados-7820.315.B, commit a26fe552569f
("Chell: Update DPTF parameters for CPU").
TEST=build/boot Linux on google/lars with Melfas touchscreen, verify
functional.
Change-Id: Idecd572335d7d5d52e4f89e85ebf7f0c90f23751
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79310
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The address space of possible SPD-EEPROMs 0x50..0x53 on the SMBus
interface is per default write-protected in FSP. This avoids that an
SPD-EEPROM on a DRAM module gets overwritten by the host.
On mc_ehl1, memory-down configuration is used and there is no SPD EEPROM
available. Nevertheless, there is a general purpose EEPROM on the same
address available which needs to stay writeable.
This patch disables the default-enabled write protect feature for the
SPD-EEPROM addresses just for mc_ehl1.
Test=Boot into Linux and make sure a write access into the EEPROM is
possible.
Change-Id: I6b0fcdbeb0dbf971cfdceb70d6f4845765a3bdb6
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Anraggar cannot boot into OS and kernel loading failure.
Update eMMC DLL values to improve initialization reliability
- Sending different speed TX/RX command/data signal to eMMC and check
the response is success or not.
- Collecting every eMMC that use for the project
- Based on above result to provide a fine tune DLL values
BUG=b:308366637
TEST=Cold reboot stress test over 2500 cycles
Change-Id: I9ec3cc23000301aa72aed96e74b63114623c4fc2
Signed-off-by: Simon Yang <simon1.yang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78851
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
As customer demand, it is necessary to set MSR Package Power Limit-1 to 17W for the DTT setting to optimize performance.
The PL1 value (17W) suggested by the thermal team which is different from the reference code(PL1=15W).
BUG=b:312321601
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot chromeos-bootimage
Built and booted into OS, and confirm MSR PL1=17W correctly.
Change-Id: If7874d26038118c5605cf0721c30e681b45123fe
Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79335
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch moves the SOC_INTEL_STORE_ISH_FW_VERSION config from the
Nissa baseboard to BOARD_GOOGLE_BRYA_COMMON. This allows all baseboards
to retrieve the ISH version and store it into memory.
Ensure SOC_INTEL_STORE_ISH_FW_VERSION is enabled only for platforms
with ISH support (DRIVERS_INTEL_ISH).
Additionally, the dedicated SOC_INTEL_STORE_ISH_FW_VERSION config
selection for the Nissa baseboard is no longer needed.
BUG=b:280722061
TEST=Able to build and boot google/marasov.
Change-Id: I99dab43ae4e13869b7f8797a9c4014f60e38a595
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79338
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Earlier entire SPI ROM was mapped to memory. With limited TLB resources
in PSP, this approach hit the limit on systems using 32 MiB SPI ROM.
Therefore regions in SPI ROM were mapped on need basis. This works well
on Picasso, Mendocino and Phoenix SoCs. But unfortunately this causes
boot hangs in Cezanne SoC. Add a configuration to map the entire SPI ROM
and enable it in Cezanne SoC. For other SoCs, keep the configuration
disabled so that only the required SPI ROM region is mapped.
BUG=b:309690716
TEST=Build and boot to OS in both Dewatt and Skyrim.
Change-Id: I166ac7b50b367c067e1a743fc94686e69dd07844
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79155
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Updating from commit id e4519efca746 (2023-11-15):
Revert "picasso: Update PSP binaries to release 0.8.13.7B"
to commit id 68ebd4b567f4 (2023-11-27):
PCO: Update ABL to version CABLRV21080200
This brings in 1 new commit:
68ebd4b567 PCO: Update ABL to version CABLRV21080200
Change-Id: I4cf528c2d2489782758d2e16ea9201324c466919
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79305
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Drop code that puts Super I/O into config mode, select serial device,
then leave config mode right away having done nothing.
I'll also take this chance to revise its #includes based on
include-what-you-use results.
Change-Id: I304fc1610740375b59121b6b8784122440795838
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73693
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Board was not producing serial output until well into ramstage.
To fix, select SUPERIO_NUVOTON_COMMON_COM_A Kconfig to tell
nuvoton_enable_serial() to route serial port A signals to the outside,
not GPIO8x.
TEST=Full native raminit debug log received over serial by minicom.
Change-Id: I376a79dd76ffa5f4d47e7c0cb53680e173e1ad78
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79222
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Upstream reimplemented KCONFIG_STRICT, just calling it KCONFIG_WERROR.
Therefore, adapt our build system and documentation. Upstream is less
strict at this time, but there's a proposed patch that got imported.
TEST=`util/abuild/abuild -C` output (config.h and
config.build) remains the same. Also, the failure type fixed in
https://review.coreboot.org/c/coreboot/+/11272 can be detected,
which I tested by manually breaking our Kconfig in a similar way.
Change-Id: I322fb08a2f7308b93cff71a5dd4136f1a998773b
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79259
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Now that the 4.22 release tag has been added to git, update the release
notes with the final statistics and wording.
We also decided to add a fix submitted immediately after the 4.22
release was tagged into the release package and do a point release.
This also adds an expected date for the next release
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Iae9653a275fcc1d11efbb88e12676f332be0a5dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79147
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The upstream build system uses a newly introduced function `read-file`,
so copy that in from Linux 6.2.
TEST=`util/abuild/abuild -C` output (config.h and config.build) remains
the same
Change-Id: Ic100bf189ebd3eaa0eb26904ae8602910329a180
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79179
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
In nissa platform, we configured GPP_F17 as SCI+APIC to wake the system
and also generate IRQ to the IOAPIC. Currently, we set GPP_F17 to level
triggered and it causes AP (Application Processor) to keep sending
GET_NEXT_EVENT to EC during resume from suspend by connecting AC.
So we change GPP_F17 to edge triggered to avoid this condition.
BUG=b:308716748
TEST=Original failure rate was 7 out of 10 times and it reduced to
0 out of 60 times on six joxer systems.
Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Change-Id: I3ceb1dfce46376a6a9a8c6cb6d691d818a0a42ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79244
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
When cleaning the sensitive data in the memory, we will want to prevent
zero out the content of tbb_buffer. Move the ttb_buffer to a standalone
section will simplify the problem.
BUG=b:248610274
TEST=emerge-cherry libpayload
BRANCH=none
Change-Id: I610276cbe30552263d791860c15e5ad9a201c744
Signed-off-by: Yi Chou <yich@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79078
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable 3VSBSW# in NCT6779D super I/O like other variants in the family,
needed to maintain power to memory during S3 suspend. Without it
resuming totally fails.
(Enabling it in devicetree is OK; it needs not be done in early
board init.)
TEST=Resuming from S3 works.
Change-Id: Ia8059b2a263ab5c459e54685f046eeb913776473
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78205
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kevin Keijzer <kevin@quietlife.nl>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch enables the FSP (Firmware Splash Screen) rendering feature
for all Rex variants, including chromeboxes like Ovis. This will allow
users to see the FSP logo during the boot process.
BUG=b:284799726
TEST=Verify that the FSP logo is displayed during the boot process on
an google/ovis chromebox.
Change-Id: I73d82e16f70ffdc8cb168506c86d9c4e9a92c38d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79175
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
The Genoa SoC has 6 I2C controllers. In order to support those, select
SOC_AMD_COMMON_BLOCK_I2C and implement the SoC-specific functions and
data structures needed by the common AMD I2C code. Since the common AMD
I2C code also reports if the controller is enabled or not in the SSDT,
change the corresponding DSDT code to use this information. In this
patch the I2C pad control registers don't get configured by coreboot yet
and we rely on ABL already having those set up correctly which seems to
be an assumption that the reference firmware is making too. PPR #55901
Rev 0.26 was used as a reference for the I2C controllers and the GPIO
pins being used.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iebc10de6ea5c6d441cff04e016dcec62405078c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78900
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
The code for "phase 4" of firmware verification currently only sets a
recovery reason when there's an actual hash mismatch detected in
vb2api_check_hash_get_digest(). This is the most likely way how this
section of code can fail but not the only one. If any other unexpected
issue occurs, we should still set a recovery reason rather than just
reboot and risk an infinite boot loop.
This patch adds a catchall recovery reason for any error code that falls
out of this block of code. If a more specific recovery reason had
already been set beforehand, we'll continue to use that -- if not, we'll
set VB2_RECOVERY_FW_GET_FW_BODY.
Change-Id: If00f00f00f00aa113e0325aad58d367f244aca49
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78866
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch unifies and simplifies the Kconfig selection model for the
Gru, Herobrine, Trogdor and Veyron boards according to the model
discussed in CB:78972.
Also add missing license headers to two Kconfig files while I'm here.
Change-Id: If679a05afd10869afba9c2a33b54862e102b5f40
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79022
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
While transitioning the devicetree to make use of the chipset
devicetree, commit 3b5b9f4c54 ("mb/hp/280_g2: Make use of the chipset
devicetree") removed useful comments documenting the endpoints of the
root ports. Restore them.
Change-Id: I178cb472a8f40baaccc30514689bda2730dfa9dc
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79153
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Some sensitive data may remain DMA buffer, we will want to zero out
everything on the DMA buffer before we jump into the kernel to
prevent leaking sensitive data into the kernel.
To accomplish that, we will need this function to get the range of
memory that can be allocated by the dma allocator.
BUG=b:248610274
TEST=emerge-cherry libpayload
BRANCH=none
Signed-off-by: Yi Chou <yich@google.com>
Change-Id: I8f3058dfd861ed44f716623967201b8cabe8d166
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78407
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
This patch guarantees that non-ChromeOS platforms continue to enable
early caching.
ChromeOS devices, on the other hand, control this configuration through
the motherboard configuration based on the underlying SoC.
BUG=b:306677879
TEST=Enable SOC_INTEL_COMMON_BASECODE_RAMTOP for google/rex.
Change-Id: I412b2b6a807dc0f5f2632f0fbd56bd37689dead3
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79049
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
This patch enables the `SOC_INTEL_COMMON_BASECODE_RAMTOP` config
option for select mainboards, as not all board variants may want to
enable this config due to underlying SoC dependencies.
Mainboards that attempt to enable early caching have exhibited soft
hangs while switching between pre-RAM and post-RAM phases. This patch
allows mainboards to choose to enable this option without enabling
it by default (which could cause boot hangs).
Furthermore, it reorganizes the configuration options under
BOARD_GOOGLE_BASEBOARD_REX in alphabetical order for better readability.
BUG=b:306677879
TEST=Enable SOC_INTEL_COMMON_BASECODE_RAMTOP for google/rex and
intel/mtlrvp.
Change-Id: If380c2ecbee4f6437c3d58bfb55be076a4902997
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79048
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
This partially reverts commit f493857c9b ("mb/google/brya/var/*: Set
dGPU/LAN/WLAN device type to generic"). Setting the LAN device type to
generic broke programming the LAN MAC address, so set it back to pci.
TEST=build/boot google/brya (osiris), verify LAN MAC address programmed
correctly.
Change-Id: I4fb43b7212e67b5c38724baad572860bc45b558e
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79150
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This mostly reverts commit 6c705e766f ("mb/google/puff/var/*: Set
LAN/WLAN device type to generic"). Setting the LAN device type to
generic broke programming the LAN MAC address, so set it back to pci.
TEST=build/boot google/puff (wyvern), verify LAN MAC address programmed
correctly.
Change-Id: I558ae6dc1366d5a8a22e0383d7d597d15159df03
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79149
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Instead of using MSR IA32_PLATFORM_ID read the SystemAgent device id
to figure out the PC type. This follows the BWG which suggest to not
use MSR IA32_PLATFORM_ID for system identification.
Tested: Lenovo X220 still boots.
Change-Id: Ibddf6c75d15ca7a99758c377ed956d483abe7ec1
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78826
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Write MSRs that are in scope package only once by checking for the BSP
bit. While this improves performance a bit it also has the benefit
that registers can be safely locked down without the need for
semaphores.
TEST: Lenovo X220 still boots.
Change-Id: I43f5d62d782466d2796c1df6015d43c0fbf9d031
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78607
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Updating from commit id c59794a6:
2023-11-02 Nicholas Bishop sign_uefi: Support signing via pkcs11
to commit id f2b01bf0:
2023-10-27 Julius Werner firmware: Undeprecate VB2_RECOVERY_FW_GET_FW_BODY
This brings in 66 new commits:
c59794a6 sign_uefi: Support signing via pkcs11
68d4aa4b sign_uefi: Skip private key check if it's a pkcs11 URI
6b9d624b sign_uefi: Pass each key path separately
483f65e4 sign_official_build.sh: properly show errors on loem issues
516ee7bc sign_uefi: Use named args instead of positional
0eec8e25 vboot_reference-sys: Switch from Command to bindgen::Builder
46f5aab8 image_signing: support multiple release names
f13af139 sign_official_build: Sudo invocation within bits of android signing
3f165374 futility: updater: Add optional serial number argument to --ccd
64379cc6 sign_official_build: add --debug flag
7160bf9f 2lib: Fix relocation issue when compiling locally with musl libc
0e27cdff vboot_reference-sys: Add vboot_host.h
2c82e73c Override use_apksigner FLAGS
b43469c7 futility/cmd_show: Support --publickey FW_VBLOCK
0eb4da96 tests/futility: Update kern_preamble.bin as kernel_part.bin
68a03355 tests/futility: Move test_show_vs_verify.sh into test_show_and_verify.sh
8daf1474 tests/futility: Move 'futility show' tests to a separate file
34190e3d futility: Exit with error when metadata hash verification not supported
967aa462 firmware/2lib: Fix function comment for vb2api_get_firmware_size()
f2b01bf0 firmware: Undeprecate VB2_RECOVERY_FW_GET_FW_BODY
ef6d02df futility/vb2_helper: Add missing newline for error messages
886d13d7 PRESUBMIT: switch to cros format
ac2e1a75 host/lib: Decouple openssl headers from HOSTLIB
86ec05f7 futility: updater: Add help info for --quirks
2850244e futility: updater: Abort if the unlock_csme_* is used on a locked device
f1b5c88d devkeys: delete old unused firmware_bmpfv.bin
4444c5fe crossystem: Fix tpm_fwver for fwid < 12935
98ef339f 2lib: Prevent overwriting the value of fw_vboot2
c7517eb4 make_dev_ssd: support ChromeOS Kdump
8e3462cc tlcl: Increase the TPM_BUFFER_SIZE
740a2966 vboot_reference: Drop 'host' usage for 'internal' in flashrom.h
57877a44 vboot: Remove comments about physical dev switch
3401d16c 2lib: Fix typos, comments and formats
fdf52d45 scripts/: Drop deprecated {g,s}et_gbb_flags.sh scripts
bf76e9ee 2lib: Output the correct kernel_version
1ac4663e make_dev_firmware.sh: update pattern for matching wp status
c57ab9f7 2lib: Add recovery reason VB2_RECOVERY_WIDEVINE_PREPARE
e094ba31 tlcl: Reduce the variants of TPM2B
b047600d sign_official_build: support key config for pkcs11
f8712b73 vboot: support signing with pkcs11 private key
17fe786f strip_boot_from_image.sh: sfill fast
6c856cd3 futility/updater: Fix EC software write protection logic
1dc5a421 futility: update: Deprecate --unlock_me by --quirk unlock_csme_nissa
f0d88587 futility: update: Refactor the 'unlock ME' quirk(s)
81429ee9 futility: update: Do not update RO when the AP RO is locked
a3beb737 futility: update: Revise the ordering or quirks
2c1844fa futility: update: Remove unused quirk 'unlock_wilco_me_for_update'
75530d32 tests/futility: Test with new signer_config.csv based firmware updater
cba649fa 2lib: Expose 2hmac
ab015448 2lib: Refactor hmac to vb2_hmac_calculate
3545f8b4 Revert "sign_uefi: Remove exception catching"
55f625a9 dump_fmap: Add offset and size to flash_ec format output
a27ee336 keygeneration: add shellcheck source statements to help linting
055f9aa2 keygeneration: replace_recovery_key.sh: make minios key optional
6cb8ab60 scripts: delete unused values kernel command line
1f76c38b vboot: Drop phone recovery support
ccf6b037 scripts: Legacy fix for set_gbb_flags.sh
8f03069e futility: Add basic README.md
88963df8 utility: Query platform wp status with futility
6c3817d2 utility: Drop cros_alias technical debt in dev_debug_vboot
df85f512 scripts: Drop cros_alias technical debt in make_dev_firmware.sh
7395cd68 futility/updater_utils.c: Match on EC path to prepare for split
52518415 crossystem: Recover corrupted RW_NVRAM on flash writes
81f9ddaf futility/cmd_gbb_utility.md: Add basic GBB subcmd doc
c4995268 futility/: Fix define confusion
69dab5a6 crossystem: Avoid writing duplicate entries to RW_NVRAM
6c37b520 Revert "crossystem: stop supporting legacy chromeos_acpi driver"
Change-Id: Ic7ecdabcdd26df349b8abf1c5a77c806facfe1d8
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78865
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Check FW_CONFIG and disable gpios for HPS if HPS_ABSENT for skolas
and brya0 variants.
BUG=b:311740746
BRANCH=firmware-brya-14505.B
TEST=`emerge-brya coreboot chromeos-bootimage`, flash and boot skolas
to kernel and verify via "cbmem -c | grep HPS".
Change-Id: I8cbe4f40c41f1d06e8f511c3e88c05984566d441
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Check FW_CONFIG and disable gpios for LTE if LTE_ABSENT for skolas
and brya0 variants.
BUG=b:311459627
BRANCH=firmware-brya-14505.B
TEST=`emerge-brya coreboot chromeos-bootimage`, flash and boot skolas
to kernel and verify LTE gpios are disabled via "cbmem -c | grep LTE".
Change-Id: I3f3bc2b536babf71cc484cce02f96f47707f729c
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79122
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Skolas uses brya0 schematic, so override tree should be almost the same
for brya0 and skolas. This change sync's the skolas overridetree.cb
with brya0's overridetree.cb.
BUG=b:311722825
BRANCH=firmware-brya-14505.B
TEST=`emerge-brya coreboot chromeos-bootimage`, flash and boot skolas to
kernel.
Change-Id: I14a2ed803a8ffb8614018af587c66034fb724b38
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
This changes the path where go installs its packages.
Now the packages are not installed in the users home directory anymore.
This solution is not perfect though, since offline build are still not
possible, because go will fetch the packages at build time.
-modcacherw will create the go files with rw permissions, otherwise
coreboot is not able to delete the files afterwards (make distclean).
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I2a35369628454057ea4758cd1225e57f07cb71c8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77780
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Since the HD audio controller in the PCH are always on the same device
functions, the device operations can be statically assigned in the
devicetree and there's no need to bind the host bridge device operations
to the PCI device during runtime via a list of PCI IDs.
TEST=Lenovo X220 still boots to Linux and audio still works
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Change-Id: I9bbbe9f4490dc6fb21174d63d1c8906d69ea3ee0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79118
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since the PCIe root ports in the PCH are always on the same device
functions, the device operations can be statically assigned in the
devicetree and there's no need to bind the host bridge device operations
to the PCI device during runtime via a list of PCI IDs.
TEST=Lenovo X220 still boots to Linux and all PCIe devices on PCH are
visible and working.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Change-Id: I05bfe8db88fd54415f320f32ea147636ca4e0df8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79117
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Since the integrated GPU is always function 0 of device 2 on bus 0, the
device operations can be statically assigned in the devicetree and
there's no need to bind the host bridge device operations to the PCI
device during runtime via a list of PCI IDs.
TEST=Lenovo X220 still boots to Linux and graphics works in UEFI
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Change-Id: I20e387e626e19dc441aceda18451186d1e86cd5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79114
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
@@ -128,7 +128,11 @@ data or modify the currently running kernel.*
## External links
* [A Tour Beyond BIOS Implementing UEFI Authenticated Variables in SMM with EDKI](https://software.intel.com/sites/default/files/managed/cf/ea/a_tour_beyond_bios_implementing_uefi_authenticated_variables_in_smm_with_edkii.pdf)
```{toctree}
:maxdepth: 1
A Tour Beyond BIOS Implementing UEFI Authenticated Variables in SMM with EDKI <https://software.intel.com/sites/default/files/managed/cf/ea/a_tour_beyond_bios_implementing_uefi_authenticated_variables_in_smm_with_edkii.pdf>
```
Note, this differs significantly from coreboot's implementation.
@@ -124,25 +124,9 @@ additional calling arguments are passed via `%ebx`.
**NOTE**: The size of the struct entries are in the native word size of
smihandler. This means 32 bits in almost all cases.
#### - SMMSTORE_CMD_INIT = 4
#### - SMMSTORE_CMD_INIT_DEPRECATED = 4
This installs the communication buffer to use and thus enables the
SMMSTORE handler. This command can only be executed once and is done
by the firmware. Calling this function at runtime has no effect.
The additional parameter buffer `%ebx` contains a pointer to the
following struct:
```C
structsmmstore_params_init{
uint32_tcom_buffer;
uint32_tcom_buffer_size;
}__packed;
```
INPUT:
-`com_buffer`: Physical address of the communication buffer (CBMEM)
-`com_buffer_size`: Size in bytes of the communication buffer
Unused, returns SMMSTORE_REG_UNSUPPORTED.
#### - SMMSTORE_CMD_RAW_READ = 5
@@ -215,7 +199,11 @@ running kernel.
## External links
* [A Tour Beyond BIOS Implementing UEFI Authenticated Variables in SMM with EDKI](https://software.intel.com/sites/default/files/managed/cf/ea/a_tour_beyond_bios_implementing_uefi_authenticated_variables_in_smm_with_edkii.pdf)
```{toctree}
:maxdepth: 1
A Tour Beyond BIOS Implementing UEFI Authenticated Variables in SMM with EDKI <https://software.intel.com/sites/default/files/managed/cf/ea/a_tour_beyond_bios_implementing_uefi_authenticated_variables_in_smm_with_edkii.pdf>
```
Note that this differs significantly from coreboot's implementation.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
